CHANGE DETAIL DATE WRITE APPROVE

- Modify engine horse power 09/23/14 YH.KIM TW.KIM

- Add machine min, turning radius data 09/23/14 YH.KIM TW.KIM
Ver. 02 User Service Data Change 07/14/16 KH.Hwang SJ.KWON
Ver. 03 User Service Data Change(Engine Oil) 10/14/16 KH.Hwang SJ.KWON
Ver. 04 Sub Group Weight Change(Dozer, Outrigger) 03/30/17 J.S.HWANG SJ.KWON
- - - - -

CONFIDENTIAL For Sales Dept. Use Only

DX170W-5
CONTENTS PAGE

1. GENERAL SPECIFICATION 2
2. SPECIFICATION COMPARISON 3
3. ENGINE SYSTEM 4
- ENGINE PERFORMANCE CURVE 6
4. HYDRAULIC SYSTEM 7
- PUMP PERFORMANCE CURVE 10
5. SWING MECHANISM 11
6. DRIVE MECHANISM 12
1) TRAVELLING SYSTEM 12
- TRAVEL PERFORMANCE CURVE 14
2) BRAKE SYSTEM 15
3) STEERING SYSTEM 16
4) CHOCKING SYSTEM 16
7. HYDRAULIC CYLINDERS 17
8. FRONT 18
1) FRONT LINK PIN SIZES 18
2) WORKING ATTACHMENT 20
3) OPTION PIPINGS 21
9. DIMENSIONS AND WORKING RANGE 22
1) DIMENSION 22
2) WORKING RANGE 26
10. PERFORMANCE DATA 30
11. NOISE LEVEL 31
12. SUB GROUP WEIGHT 31
13. USER SERVICE DATA 32
14. CIRCUITS 33
◆ LIFTING CAPACITIES
◆ BUCKET RECOMMANDATION

MODEL DX170W-5 DOCUMENT NO. 1/33

DOOSAN INFRACORE CO. LTD.
1. GENERAL SPECIFICATION

ITEMS UNIT DX170W-5(1) DX170W-5(2) DX170W-5(3) DX170W-5(4)

OPERATING WEIGHT ton 18.3 16.8 17.8 17.8
3
BUCKET CAPACITY (PCSA) M 0.66 0.76 0.66 0.66
RATED POWER kW/rpm 113.2 / 2.000
ENGINE
MAX. TORQUE kg.m/rpm 66 / 1,400
SYSTEM PRESSURE (WORK/TRAVEL) MPa 34.3(36.3)/34.3
SWING SPEED rpm 10.7
TRAVEL SPEED (High/Econo/Low/Creep) km/h 37 / 10 /3
GRADEABILITY %(deg) 60 (31) 60 (31) 64 (33) 64 (33)
TIRE SIZE mm 10.00 - 20 - 14PR
DIGGING BUCKET ton 11.6/12.3 11.6/12.3 11.6/12.3 11.6/12.3
FORCE(SAE) ARM ton 8.2/8.6 9.5/10.1 8.2/8.6 7.5/7.9
MAX. DIGGING REACH mm 9,090 8,715 8,875 9,285
WORKING MAX. DIGGING DEPTH mm 5745 5,350 5,315 5,815
RANGE MAX. DIGGING HEIGHT mm 10,045 9,760 9,140 9,250
REAR SWING RADIUS mm 2,795 3,035 2,990 3,125
OVERALL LENGTH mm 8,320 8,352 8,219 8,190
OVERALL WIDTH mm 2,500 0 0 0
TRANSPORT OVERALL HEIGHT mm 3,136 3,165 3,098 3,433
DIMENSION GROUND CLEARANCE mm 350 ← ← ←
WHEEL BASE mm 2,650 ← ← ←
TREAD mm 1,944 ← ← ←
DOZER BLADE WIDTHXHEIGHT mm 0
MIN. TURNING RADIUS m 7.7

• ONE-PIECE BOOM : 5100 mm

• TWO-PIECE BOOM : 5200 mm
(LOWER : 1900mm, UPPER : 3650mm)
• ARM : 2100mm, 3000 mm
OPTION ATTACHMENT
• BUCKET (PCSA) :
STD. 0.66m3
OPT. 0.32m3 (NARROW), 0.48m3 , 0.76m3 , 090m3,
• DOZER BLADE, INDEPENDENT CONTROLLED OUTRIGGER

DX170W-5(1) : TWO-PIECE STD. BOOM(5200mm), ARM(2500mm), STD. BUCKET(0.66m3)

FRONT & REAR STABILAZER
DX170W-5(2) : TWO-PIECE STD. BOOM(5200mm), SHORT ARM(2100mm), STD. BUCKET(0.76m3)
FRONT CRADLE & REAR DOZER
DX170W-5(3) : ONE-PIECE BOOM(5100mm), ARM(2500mm), STD. BUCKET(0.66m3)
FRONT DOZER BLADE & REAR OUTRIGGER
DX170W-5(4) : ONE-PIECE BOOM(5100mm), ARM(3000mm), STD. BUCKET(0.66m3)
FRONT DOZER BLADE & REAR OUTRIGGER

*OVERALL HEIGHT TO THE GUARDRAIL

MODEL DX170W-5 DOCUMENT NO. 2/33

DOOSAN INFRACORE CO. LTD.
2. SPECIFICATION COMPARISON

CAT. KOTMATSU LIEBHERR VOLVO

ITEMS UNIT
M316D PW160-8 A916Li EW160D
OPERATING WEIGHT ton 17.15 16.67 17.80 17.25
3
BUCKET CAPACITY (PCSA) M 0.35~1.26 0.47~1.13 0.17~.0.95 -
RATED POWER PS/rpm 160/1800 130/2200 150/1800 156/1900
ENGINE
MAX. TORQUE kg.m/rpm 80/1400 - - 73/1350
SYSTEM PRESSURE (WORK/TRAVEL) MPa 35/37.5 38/42 35/35 36/36
SWING SPEED rpm 10.5 11 9 10
TRAVEL SPEED (High/Econo/Low/Creep) km/h 37 35 25 (30) 35
GRADEABILITY %(deg) 63(31.5) - - -
TIRE SIZE mm 10.00-20 10.00-20 10.00-20 10.00-20
DIGGING BUCKET ton 10.3 9.9 10.7 13.0
FORCE(SAE) ARM ton 7.5 6.1 6.7 8.7
MAX. DIGGING REACH mm 9,160 9,070 8,900 9,030
WORKING MAX. DIGGING DEPTH mm 5,670 5,320 5,450 5,610
RANGE MAX. DIGGING HEIGHT mm 9,090 8,930 9,700 9,100
REAR SWING RADIUS mm 2,280 2,180 2,270 2,150
OVERALL LENGTH mm 8,400 8,345 8,350 8,250
OVERALL WIDTH mm 2,540 2,540 2,550 2,540
TRANSPORT OVERALL HEIGHT mm 3,170 3,175 3,158 3,040
DIMENSION GROUND CLEARANCE mm 370 350 350 360
WHEEL BASE mm 2,600 2,600 2,540 2,600
TREAD mm - 1,915 - 1,940
DOZER BLADE WIDTHXHEIGHT mm 2,550 x ? 2,550 x ? 2,550x 2,540X630
MIN. TURNING RADIUS m 6 7 7 7
ONE- ONE- ONE- ONE-
PIECE PIECE PIECE PIECE
BOOM BOOM BOOM BOOM
5050mm 5300mm 5000mm 5000mm

ARM ARM ARM ARM

MAJOR MACHINE CONFIGURATION mm 2400mm 2500mm 2450mm 2450mm

DOZ & OUT & DOZ & DOZ &

OUT DOZ OUT OUT

MODEL DX170W-5 DOCUMENT NO. 3/33

DOOSAN INFRACORE CO. LTD.
3. ENGINE SYSTEM

1) ENGINE
MAKER & MODEL : DOOSAN DL06
RATED HORSE POWER : GROSS POWER :
113kW(154PS, 152HP) @2000rpm (SAE J1995)
NET POWER :
111kW(151PS, 149HP) @2000rpm (SAE J1349)

MAX. TORQUE : 66 kgf.m @1400 rpm

FUEL CONSUMPTION : 156 g/ps.h @ RATED SPEED
TYPE : 4-CYCLE WATER-COOLED
TURBOCHARGE,
COMMON RAIL DIRECT INJECTION
EXHAUST GAS RECIRCULATION
DISPLACEMENT : 5,890 cc
No. OF CYLINDER : 6
BORE DIA. & STROKE : Φ100 x 125 mm
HIGH IDLE SPEED : 2100 ± 25rpm
LOW IDLE SPEED : 800 ± 10 rpm
STARTING MOTOR : 24 V x 6.0 kW
DRY WEIGHT : 670 kg

2) ALTERNATOR
VOLTAGE : 24 V
RATING AMPERES : 80 A

3) BATTERY
SYSTEM VOLTAGE : 24 V
QUANTITY : 2
CAPACITY (AMP) : 150 AH

4) PUMP DRIVE
DRIVE
DRIVE
TYPE
TYPE : FLEXIBLE COUPLING JOINT
PERMISSIBLE TORQUE & RPM : 160 kgf.m, 4000 rpm

5) AIR CLEANER
TYPE : DRY, DOUBLE ELEMENT
FILTRATION AREA : 7.6 m2 (OUTER), 1.4 m2 (INNER)
SIZE (DIA.x LENGTH) : Φ279.4 mm x 489.5 mm

6) 2
TYPE : DOC, SCR, AOC
TYPE OF catalytic action : DOC(Diesel Oxidation Catalyst)
SCR(Selective Catalytic Reduction)
AOC(Ammonia Oxidation Catalytic)
WEIGHT : 90 kg

MODEL DX170W-5 DOCUMENT NO. 4/33

DOOSAN INFRACORE CO. LTD.
7) FAN
TYPE : 9-BLADE, PLASTIC,SUCKER
SIZE : Φ650 mm
RPM AT RATED ENGINE RPM : 1800 rpm (Work) / 2000 rpm (Travel)
PULLEY RATIO : 1 : 1.16
FAN PULLEY DIA. : Φ137.6 mm

8) RADIATOR
TYPE : CORRUGATE WAVE FIN
HEAT REJECTION CAPACITY : MIN. 44712 kcal/h

9) OIL COOLER
TYPE : CORRUGATE WAVE FIN
HEAT REJECTION CAPACITY : MIN. 33534 kcal/h

10) CHARGE AIR COOLER (INTERCOOLER)

TYPE : CORRUGATE WAVE FIN
HEAT REJECTION CAPACITY : MIN. 15305 kcal/h

11) FUEL COOLER

TYPE : CORRUGATED WAVE FIN

MODEL DX170W-5 DOCUMENT NO. 5/33

DOOSAN INFRACORE CO. LTD.
- ENGINE PERFORMANCE CURVE

TEST CONDITION SPECIFICATION

BAROMETIC PRESSURE 760 mmHg (20℃)
COOLING FAN X
ALTERNATOR 24V x 50A
AIR CLEANER INSTALLED
MUFFLER INSTALLED

PERFORMANCE STANDARARD KS-B6537

POWER (MAX, RATED) 154 PS/ 2000 rpm
MAX. TORQUE 66 kg.m / 1400 rpm
FUEL CONSUMPTION (MAX, RATED) 156 g/ps.h

MODEL DX170W-5 DOCUMENT NO. 6/33

DOOSAN INFRACORE CO. LTD.
4. HYDRAULIC SYSTEM

1) MAIN PUMP
TYPE : PARALLEL, BENT-AXIS, AXIAL PISTON
QUANTITY : 2
DISPLACEMENT : 85 cc/rev
MAX. FLOW RATE : 2-170 Liter/min @ 2000rpm
FLOW REGULATOR TYPE : NEGATIVE CONTROL
WEIGHT : 90 kg

2) PILOT PUMP
TYPE : GEAR
DISPLACEMENT : 10.7 cc/rev
REDUCTION RATIO : 1 : 0.887
MAX. FLOW RATE : 24.1 Liter/min @ 2000rpm
RELIEF VALVE PRESSURE : 4 MPa

3) STEERING GEAR PUMP

TYPE : GEAR
DISPLACEMENT : 19.0 cc/rev
MAX. FLOW RATE : 35.5 Liter/min @ 2000rpm
RELIEF VALVE PRESSURE : 17.5 ~ 18.5 MPa

4) BRAKE GEAR PUMP

TYPE : GEAR
DISPLACEMENT : 7.3 cc/rev
MAX. FLOW RATE : 13.6 Liter/min @ 2000rpm
RELIEF VALVE PRESSURE : 15.7 MPa

5) CONTROL VALVE; MAIN

TYPE : PILOT CONTROL
NO. OF SPOOLS : 9(MONO), 10(ARTI)
SPOOL DIA. : Φ22 mm
SPOOL ARRANGEMENT : TRV, OPT, SW, BM2, AM1,
DOZ, BOOM, BUCKET, OPT, ARTI
RELIEF VALVE PRESSURE : 34.3MPa(WORK/TRAVEL)/36.3MPa(BOOST)
PORT RELIEF VALVE PRESSURE : 37.3MPa(BOOM, ARM, BUCKET,OPT)
ACCESSARY VALVES :
FOOT RELIEF VALVE, BOOM HOLDING VALVE,
ARM HOLDING VALVE

WEIGHT : 120 kg

6) REMOTE CONTROL VALVE; IMPLEMENT

TYPE : PILOT (2-STAGE JOYSTICK)
PRESSURE / STROKE CHARACTERISTIC : 0.64 MPa (@ 1.0mm STROKE) ~
(1, 3) 2.75 MPa (@ 6.5mm STROKE)
(2, 4) 2.75 MPa (@ 7.5mm STROKE)
WEIGHT : 3.63 kg

MODEL DX170W-5 DOCUMENT NO. 7/33

DOOSAN INFRACORE CO. LTD.
 7) REMOTE CONTROL VALVE; TRAVEL
TYPE : PILOT
PRESSURE / STROKE CHARACTERISTIC : 1 MPa (@ 1.2mm STROKE),
2.84 MPa (@ 5.5mm STROKE)

8) REMOTE CONTROL VALVE; DOZER BLADE

TYPE : PILOT
PRESSURE / STROKE CHARACTERISTIC : 0.5 MPa (@ 1.0mm STROKE),
2.75 MPa (@ 6.5mm STROKE)

9) REMOTE CONTROL VALVE; TWO-PIECE BOOM

TYPE : PILOT
PRESSURE / STROKE CHARACTERISTIC : 0.74 MPa (@ 1.0mm STROKE),
2.47 MPa (@ 4.8mm STROKE)

10) PILOT SUPPLY VALVE(STD.)

RATED CAPACITY : DC 24V, 22W @25℃
FUNCTION : PILOT CUT-OFF, CHOCK, INCHING,

11) PILOT SUPPLY VALVE(OPT.)

RATED CAPACITY : DC 24V, 22W @25℃
FUNCTION : SAFETY CUT-OFF, CHOCK, INCHING, HAMMER
OPERATION

12) TRANSMISSION CONTROL VALVE

RATED CAPACITY : DC 24V
FUNCTION : HIGH & LOW(with PARKING)

13) SOLENOID VALVE PACKAGE

RATED CAPACITY : DC 24V, 22W @25℃
FUNCTION : FWD, REV, CRUISE, PRESSURE UP

14) BRAKE SUPPLY VALVE

LOADING-UNLOADING PRESSURE : 10.1 ~ 12.3 MPa
PRESSURE RELIEF VALVE : 15.7 MPa
LOW PRESSURE WARNING : 6.5 MPa
ELECTRIC RATED VOLTAGE : DC 24V

15) BY-PASS VALVE(1)

CRACKING PRESSURE : 0.2 MPa @ 10 Liter/min

16) BY-PASS VALVE(2) for COOLER

CRACKING PRESSURE : 0.25 MPa @ 10 Liter/min

17) ACCUMULATOR(FOR PILOT)

NITROGEN CHARGE PRESSURE : 1 MPa
VOLUME : 0.75 Liter

18) ACCUMULATOR(FOR BRAKE)

NITROGEN CHARGE PRESSURE : 3 MPa
VOLUME : 0.75 Liter, 2EA

MODEL DX170W-5 DOCUMENT NO. 8/33

DOOSAN INFRACORE CO. LTD.
19) FILTERS
19-1) RETURN FILTER
TYPE : GLASS FIBER
SIZE : 10μ, 1.6 m2 (Φ150 x 415mm )
BY-PASS VALVE SETTING : 0.15 MPa @ 40 Liter/min

19-2) PILOT FILTER

TYPE : GLASS FIBER
SIZE : 10μ, 340 cm2
BY-PASS VALVE SETTING : 0.17MPa @ 5 Liter/min

19-3) BRAKE FILTER

TYPE : GLASS FIBER
SIZE : 10μ, 560 cm2
BY-PASS VALVE SETTING : 0.35MPa @ 5 Liter/min

19-4) SUCTION FILTER

TYPE : MESH
SIZE : 177μ(80 mesh), 0.296m2 (Φ150 x 142mm )

20) AIR BREATHER

CRACKING PRESSURE : 0.045±0.004 MPa
FILTER : 10μ, 590 cm2

MODEL DX170W-5 DOCUMENT NO. 9/33

DOOSAN INFRACORE CO. LTD.
- PUMP PERFORMANCE CURVE

[ P+ MODE] AUTO IDLE OFF

INPUT SPEED ; 1,780rpm
INPUT POWER (INCLUDING GEAR PUMP) ; 144.8PS
[ P MODE]
INPUT SPEED ; 1,600rpm
INPUT POWER (INCLUDING GEAR PUMP) ; 126.4PS
[ S MODE]
INPUT SPEED ; 1,500rpm
INPUT POWER (INCLUDING GEAR PUMP) ; 115.6PS
[ E MODE]
INPUT SPEED ; 1,400rpm
INPUT POWER (INCLUDING GEAR PUMP) ; 105.4PS

No Image

MODEL DX170W-5 DOCUMENT NO. 10/33

DOOSAN INFRACORE CO. LTD.
5. SWING MECHANISM

1) SWING MOTOR
TYPE : AXIAL PISTON
DISPLACEMENT : 86 cc/rev
CROSSOVER RELIEF VALVE SETTING : 27.5MPa
MAX. SUPPLY FLOW (@1700 RPM) : 144.5 Liter/min
MOTOR SHAFT SPEED : 1680 rpm
MOTOR SHAFT TORQUE : 38.3 kgf.m
ACCESSARY VALVES : SWING REACTIONLESS VALVE
WEIGHT : 0

2) SWING REDUCTION GEAR

DRIVE TYPE : 2-STAGE PLANETARY GEAR
REDUCTION RATIO : 19.000
MAX. OUTPUT SPEED : 88 rpm
MAX. OUTPUT TORQUE : 728.2 kgf.m
WEIGHT (INCLUDED MOTOR) : 140.3kg

3) PINION GEAR
TYPE : SPUR GEAR
GEAR P.C.D. : Φ120 mm
No. OF TEETH : 10
MODULE : 12

4) SWING BEARING
TYPE : BALL BEARING, INTERNAL GEAR
GEAR P.C.D. : Φ960 mm
No. OF TEETH : 80
BALL DIA. : Φ28.575 mm
RACE O.D. : Φ1200 mm
RACE HEIGHT : 81 mm
STATIC THRUST LOAD : 364,500 kg
WEIGHT : 210 kg

5) SWING PERFORMANCE
MAX. SWING SPEED (EFF.=0.98) : 10.8 rpm
MAX. SWING TORQUE (EFF.=0.78) : 4544 kgf.m

6) PARKING BRAKE
CONTROL TYPE : PILOT PRESSURE, MECHANICAL
BRAKE TORQUE : 36.8 kgf.m
BRAKE RELEASE PRESSURE : 2.35 MPa
SELECT V/V CRACKING PRESSURE : 1.27 MPa

7) SWING SAFETY LOCK

TYPE : MANUAL PIN LOCKING

8) MOTOR ACCESSARY
BRAKE TIME DELAYER : 5 (+3/0)sec

MODEL DX170W-5 DOCUMENT NO. 11/33

DOOSAN INFRACORE CO. LTD.
6. DRIVE MECHANISM

1) TRAVELLING SYSTEM
1-1) TRAVEL MOTOR
TYPE : BENT AXIAL PISTON
DISPLACEMENT : 30 ~ 140 cc/rev
CROSSOVER RELIEF VALVE SETTING : 37MPa
MAX. SUPPLY FLOW : 170 Liter/min
MAX. OPERATING SPEED : 4048 rpm
MAX. OUTPUT TORQUE : 78 kgf.m

1-2) TRANSMISSION
TYPE : 2 SPEED, POWER-SHIFT
REDUCTION RATIO : 4.868 / 1.196
POWER SHIFT CONTROL PRESSURE : Min 2.9MPa, Max 4.9MPa
MAX. INPUT TORQUE : 78.5 kgf.m
MAX. OUTPUT ROTATING SPEED : 3500 rpm

1-3) PROPELLER SHAFT(FRONT & REAR)

MAX. ALLOWABLE TORQUE : 425 kgf.m
MAX. JOINT ANGLE : 22.5˚
MAX. PHASE MISALIGNMENT : ±1˚
MAX. ROTATING SPEED : 3800 rpm

1-4) PROPELLER SHAFT(MIDDLE)

MAX. ALLOWABLE TORQUE : 357 kgf.m
MAX. RUN OUT : 0.8mm
MAX. ROTATING SPEED : 5000 rpm

1-5) FRONT AXLE

TYPE : FULLY FLOATING PLANETARY DRIVE
OVERALL REDUCTION RATIO : 16 : 1
AXLE LOAD(TRAVEL CONDITION) : 12,850 kg
AXLE LOAD(WORKING CONDITION) : 33,350 kg
WHEEL BOLT P.C.D : Ø 335 mm
BRAKE TYPE : WET DISC
BRAKE TORQUE : 2,089 kgf.m at 5.9MPa
STEERING ANGLE : 35˚(INNER), 27.12˚(OUTER)
STEERING CYLINDER : Ø90mm–Ø50mm-Ø90mm,19.6MPa
(BORE SIZE-ROD DIA-STROKE, & MAX. PRESSURE)
KING PIN INCLINATION : 0˚

1-6) REAR AXLE

TYPE : FULLY FLOATING PLANETARY DRIVE
OVERALL REDUCTION RATIO : 16 : 1
AXLE LOAD(TRAVEL CONDITION) : 12,850 kg
AXLE LOAD(WORKING CONDITION) : 33,350 kg
WHEEL BOLT P.C.D : Ø 335 mm
BRAKE TYPE : WET DISC
BRAKE TORQUE : 2,089 kgf.m at 5.9MPa

MODEL DX170W-5 DOCUMENT NO. 12/33

DOOSAN INFRACORE CO. LTD.
1-7) TYRE & WHEEL(STANDARD)
TYPE : DOUBLE
TYRE SPEC. : 10.00-20-14PR, OTR, TUBE
RIM SPEC. : 7.50T x 20
DISC OFFSET : 155 mm

1-8) TYRE & WHEEL(OPTION)

TYPE : DOUBLE
TYRE SPEC. : 10.00-20-16PR, OTR, TUBE
RIM SPEC. : 7.50T x 20
DISC OFFSET : 155 mm

TYPE : -
TYRE SPEC. : -
RIM SPEC. : -
DISC OFFSET : -

MODEL DX170W-5 DOCUMENT NO. 13/33

DOOSAN INFRACORE CO. LTD.
1-9) TRAVELLING PERFORMANCE
MAX. SPEED : 37 km/hr
MAX. TRACTIVE EFFORT : 10 ton
GRADEABILITY : 33˚(64%)

- TRAVEL PERFORMANCE CURVE

No Image

MODEL DX170W-5 DOCUMENT NO. 14/33

DOOSAN INFRACORE CO. LTD.
2) BRAKE SYSTEM
2-1) BRAKE PUMP
TYPE : GEAR
DISPLACEMENT : 7.3 cc/rev
MAX. FLOW RATE : 13.6 l/min @ 2000 rpm
GEAR RATIO : 0.93 : 1

2-2) BRAKE SUPPLY VALVE

LOADING-UNLOADING PRESSURE : 10.1 ~ 12.3 MPa
PRESSURE RELIEF VALVE : 15.7 MPa
LOW PRESSURE WARNING : 6.5 MPa
ELECTRIC RATED VOLTAGE : DC 24V

2-3) ACCUMULATOR
NITROGEN CHARGE PRESSURE : 3 MPa
VOLUME : 0.75 l

2-4) SERVICE BRAKE VALVE

MAX. OUTPUT PRESSURE : 6 MPa

2-5) BRAKE FILTER

FILTRATION RATING : 10μ , 560 cm2
BY- PASS VALVE PRESSURE : 0.35MPa@ 5 Liter/min

2-6) SYSTEM & PRESSURE

SYSTEM : FULL HYDRAULIC, DUAL LINE
SERVICE BRAKE PRESSURE : 6 Mpa
BRAKE DISTANCE : 11/33km/hm

MODEL DX170W-5 DOCUMENT NO. 15/33

DOOSAN INFRACORE CO. LTD.
3) STEERING SYSTEM
3-1) PUMP
TYPE : GEAR
DISPLACEMENT : 19.0 cc/rev
MAX. FLOW RATE : 35.5 l/min @ 2000 rpm
GEAR RATIO : 0.93 : 1

3-2) STEERING UNIT

TYPE : LOAD SENSING, NON REACTION
DISPLACEMENT : 195 cc/rev
RELIEF VALVE SET PRESSURE : 17.5MPa +10/-0
OVERLOAD RELIEF VALVE SET PRESS : 23.5MPa +20/-0

3-3) STEERING UNIT; OPTION

TYPE : LOAD SENSING, NON REACTION
DISPLACEMENT : 70/320 cc/rev
RELIEF VALVE SET PRESSURE : 17.5MPa +10/-0
OVERLOAD RELIEF VALVE SET PRESS : 22.5MPa +10/-0

3-4) PRIORITY VALVE

TYPE : LOAD SENSING DYNAMIC, NON REACTION
CONTROL SPRING PRESSURE : 0.7MPa
ORIFICE SIZE (Pp / LS / Dyn) : 0.8mm / 1.2mm / 0.9mm

3-5) STEERING CYLINDER (BUILT IN FRONT AXLE, SEE 4 FRONT AXLE)

4) CHOCKING SYSTEM
4-1) CHOCKING VALVE
MAX. WORKING PRESSURE : 40 MPa
CHECK VLAVE CRACKING PRESSURE : 0.2 MPa

4-2) CHOCKING CYLINDER (SEE 7 HYDRAULIC CYLINDERS)

4-3) OSCILLATIONG ANGLE

ANGLE : ±8˚

MODEL DX170W-5 DOCUMENT NO. 16/33

DOOSAN INFRACORE CO. LTD.
7. HYDRAULIC CYLINDERS

ARTI ARM
BOOM BOOM ARM BUCKET
(TWO-PIECE) (TWO-PIECE)
QUANITIY 2 2 1 1 1 1

BORE IDA.(mm) 115 115 160 125 125 105

STROKE (mm) 1,010 955 680 1,206 1,248 995

ROD DIA.(mm) 80 80 95 90 90 70
CLOSED LENGTH
1,676 1,478 1,162 1,928 1,906 1,455
(mm)
RETRACT. CUSHION X X X O O X

EXTEND. CUSHION O O X O O O
APPLIED ARM(short) 2,100
APPLIED ARM(mm) - - - - - 2,500
APPLIED ARM(Long) 3,000
WEIGHT 150 kg 140 kg 196kg 199 kg 199 kg 110 kg

BLADE OUTRIGGER CHOCKING

QUANITIY 2 2 2

BORE IDA.(mm) 110 120 100

STROKE (mm) 190 416.5 153

ROD DIA.(mm) 70 70 100

CLOSED LENGTH
570 858.5 267
(mm)
RETRACT. CUSHION X X X

EXTEND. CUSHION X X X

WEIGHT 61 kg 100 kg 51 kg

MODEL DX170W-5 DOCUMENT NO. 17/33

DOOSAN INFRACORE CO. LTD.
8. FRONT
1) FRONT LINK PIN SIZES
1-1) ONE-PIECE BOOM

DIA. LENGTH
POINT
(mm) (inch) (mm) (inch)
A 80 3.15 713 28.1

B 71 2.80 200 7.9

C 71 2.80 706 27.8

D 80 3.15 434 17.1

E 71 2.80 217 8.5

F 71 2.80 217 8.5

G 65 2.56 393 15.5

H 71 2.80 458 18.0

I 71 2.80 196 7.7

J 71 2.80 388 15.3

K 71 2.80 458 18.0

MODEL DX170W-5 DOCUMENT NO. 18/33

DOOSAN INFRACORE CO. LTD.
 1-2) TWO-PIECE BOOM

DIA. LENGTH
POINT
(mm) (inch) (mm) (inch)
A 80 3.15 713 28.1

B 71 2.80 200 7.9

C 90 3.54 706 27.8

D 90 3.54 284 11.2

E 90 3.54 284 11.2

F 80 3.15 434 17.1

G 71 2.80 217 8.5

H 71 2.80 217 8.5

I 65 2.56 393 15.5

J 71 2.80 458 18.0

K 71 2.80 196 7.7

L 71 2.80 388 15.3

M 71 2.80 458 18.0

MODEL DX170W-5 DOCUMENT NO. 19/33

DOOSAN INFRACORE CO. LTD.
2) WORKING ATTACHMENT
2-1) BOOM

TYPE LENGTH (mm ) WEIGHT (kg )

ONE-PIECE BOOM 5,100 919

UPPER 3,650 751

TWO-PIECE BOOM
LOWER 1,900 433

ONE-PIECE BOOM (LONG) - -

2-2) ARM

DIGGING FORCE
TYPE LENGTH (mm ) WEIGHT (kg )
(NOR./PRESS. UP, ton)
STD. ARM 2,500 461 [SAE] 7.9/8.4, [ISO] 8.2/8.6

SHORT ARM 2,100 428 [SAE] 9.2/9.7, [ISO] 9.5/10.1

LONG ARM 3,000 524 [SAE] 7.3/7.7, [ISO] 7.5/7.9

LONG ARM - - [SAE] -, [ISO] -

2-3) BUCKET

CAPACITY (m 3 ) BUCKET WIDTH(mm) WEIGHT DIGGING FORCE

TYPE
CECE SAE STRUCK W/CUTTER W/O CUTTER (kg) (NOR./PRESS. UP, ton)
STD. 0.58 0.66 0.50 1,008 1,058 496
OPT.1 0.29 0.32 0.26 553 589 362
OPT.2 0.43 0.48 0.38 795 844 433 [SAE] 10.2/10.8
OPT.3 0.66 0.76 0.56 1,135 1,184 539 [ISO] 11.6/12.3
OPT.4 0.78 0.90 0.66 1,302 1,351 597
OPT.5 0.00 0.00 0.00 0 0 0
OPT.6 0.00 0.00 0.00 0 0 0

MODEL DX170W-5 DOCUMENT NO. 20/33

DOOSAN INFRACORE CO. LTD.
3) OPTION PIPINGS
3-1) ONE-WAY PIPING
MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : BREAKER

3-2) PE3C PIPING

MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : BUCKET TILT CYLINDER, CLAMSHELL
CRUSHER

3-3) PERO PIPING

MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : ROTATING GRAPPLE

MODEL DX170W-5 DOCUMENT NO. 21/33

DOOSAN INFRACORE CO. LTD.
9. DIMENSIONS AND WORKING RANGE
1) DIMENSION
1-1) ONE-PIECE BOOM [METRIC]

DIMENSION

REFERANCE DISCRIPTION 5.1m ONE-PIECE BOOM

2.5m ARM 2.1m ARM 3m ARM

A Shipping Length 8,219 8,253 8,190

B Shipping Width 2,530 ← ←

Shipping
C 3,098 3,162 3,433
Height(Boom)
D Height Over Cab 3,074 ← ←

E Rear Swing Radius 2,230 ← ←

F Ground Clearance 348 ← ←

Counter Weight
G 1,237 ← ←
Clearance
Upper Structure
H 2,234 ← ←
Height
I Upper Housing Width 2,530 ← ←

J Wheel Base 2,650 ← ←

K,L Tread Width 1,944 ← ←

MODEL DX170W-5 DOCUMENT NO. 22/33

DOOSAN INFRACORE CO. LTD.
1-2) ONE-PIECE BOOM [FEET]

DIMENSION

REFERANCE DISCRIPTION 16' 9" ONE-PIECE BOOM

8' 2" ARM 6' 11" ARM 9' 10" ARM

A Shipping Length 27' 27' 1" 26' 10"

B Shipping Width 8' 4" ← ←

Shipping
C 10' 2" 10' 4" 11' 3"
Height(Boom)
D Height Over Cab 10' 1" ← ←

E Rear Swing Radius 7' 4" ← ←

F Ground Clearance 1' 2" ← ←

Counter Weight
G 4' 1" ← ←
Clearance
Upper Structure
H 7' 4" ← ←
Height
I Upper Housing Width 8' 4" ← ←

J Wheel Base 8' 8" ← ←

K,L Tread Width 6' 5" ← ←

MODEL DX170W-5 DOCUMENT NO. 23/33

DOOSAN INFRACORE CO. LTD.
1-3) TWO-PIECE BOOM [METRIC]

DIMENSION

REFERANCE DISCRIPTION 5.2m TWO-PIECE BOOM

2.5m ARM 2.1m ARM

A Shipping Length 8,320 8,352

B Shipping Width 2,530 ←

Shipping
C 3,136 3,165
Height(Boom)
D Height Over Cab 3,074 ←

E Rear Swing Radius 2,230 ←

F Ground Clearance 348 ←

Counter Weight
G 1,237 ←
Clearance
Upper Structure
H 2,234 ←
Height
I Upper Housing Width 2,530 ←

J Wheel Base 2,650 ←

K,L Tread Width 1,944 ←

MODEL DX170W-5 DOCUMENT NO. 24/33

DOOSAN INFRACORE CO. LTD.
1-4) TWO-PIECE BOOM [FEET]

DIMENSION

REFERANCE DISCRIPTION 17' 1" TWO-PIECE BOOM

8' 2" ARM 6' 11" ARM

A Shipping Length 27' 4" 27' 5"

B Shipping Width 8' 4" ←

Shipping
C 10' 3" 10' 5"
Height(Boom)
D Height Over Cab 10' 1" ←

E Rear Swing Radius 7' 4" ←

F Ground Clearance 1' 2" ←

Counter Weight
G 4' 1" ←
Clearance
Upper Structure
H 7' 4" ←
Height
I Upper Housing Width 8' 4" ←

J Wheel Base 8' 8" ←

K,L Tread Width 6' 5" ←

MODEL DX170W-5 DOCUMENT NO. 25/33

DOOSAN INFRACORE CO. LTD.
2) WORKING RANGE
2-1) ONE-PIECE BOOM [METRIC]

BOOM TYPE 5.1m ONE-PIECE BOOM

ARM TYPE 2.5m ARM 2.1m ARM 3m ARM

BUCKET TYPE (SAE) (m3) 0.66 0.76 0.48

MAX. DIGGING REACH (mm) A 8,875 8,525 9,285
MAX. DIGGING REACH(GROUND) (mm) B 8,695 8,340 9,115
MAX DIGGING DEPTH (mm) C 5,315 4,920 5,815
MAX. LOADING HEIGHT (mm) D 6,585 6,410 6,725
MIN. LOADING HEIGHT (mm) E 2,565 3,025 2,095
MAX. DIGGING HEIGHT (mm) F 9,140 8,980 9,250
MAX. BUCKET PIN HEIGHT (mm) G 7,925 7,750 8,065
MAX. VERTICAL WALL DEPTH (mm) H 4,710 4,325 5,150
MAX. RADIUS VERTICAL (mm) I 5,945 5,835 6,110
MAX. DEPTH 8' LINE (mm) J 5,110 4,685 5,635
MIN. RADIUS 8' LINE (mm) K 2,810 2,810 2,810
MIN. DIGGING REACH (mm) L 820 1,760 495
MIN SWING RADIUS (mm) M 2,990 3,185 3,125
BUCKET ANGLE (deg) d 178 178 177

MODEL DX170W-5 DOCUMENT NO. 26/33

DOOSAN INFRACORE CO. LTD.
2-2) ONE-PIECE BOOM [FEET]

BOOM TYPE 16' 9" ONE-PIECE BOOM

ARM TYPE 8' 2" ARM 6' 11" ARM 9' 10" ARM

BUCKET TYPE (SAE) (yd3) 0.86 0.99 0.63

MAX. DIGGING REACH (ft) A 29' 1" 28' 30' 6"
MAX. DIGGING REACH(GROUND) (ft) B 28' 6" 27' 4" 29' 11"
MAX DIGGING DEPTH (ft) C 17' 5" 16' 2" 19' 1"
MAX. LOADING HEIGHT (ft) D 21' 7" 21' 0" 22' 1"
MIN. LOADING HEIGHT (ft) E 8' 5" 9' 11" 6' 10"
MAX. DIGGING HEIGHT (ft) F 30' 29' 6" 30' 4"
MAX. BUCKET PIN HEIGHT (ft) G 26' 0" 25' 5" 26' 6"
MAX. VERTICAL WALL DEPTH (ft) H 15' 5" 14' 2" 16' 11"
MAX. RADIUS VERTICAL (ft) I 19' 6" 19' 2" 20' 1"
MAX. DEPTH 8' LINE (ft) J 16' 9" 15' 4" 18' 6"
MIN. RADIUS 8' LINE (ft) K 9' 3" 9' 3" 9' 3"
MIN. DIGGING REACH (ft) L 2' 8" 5' 9" 1' 7"
MIN SWING RADIUS (ft) M 9' 10" 10' 5" 10' 3"
BUCKET ANGLE (deg) d 178 178 177

MODEL DX170W-5 DOCUMENT NO. 27/33

DOOSAN INFRACORE CO. LTD.
2-3) TWO-PIECE BOOM [METRIC]

BOOM TYPE 5.2m TWO-PIECE BOOM

ARM TYPE 2.1m ARM 2.5m ARM

BUCKET TYPE (SAE) (m3) 0.76 0.66

MAX. DIGGING REACH (mm) A 8,715 9,090
MAX. DIGGING REACH(GROUND) (mm) B 8,530 8,915
MAX DIGGING DEPTH (mm) C 5,350 5,745
MAX. LOADING HEIGHT (mm) D 7,090 7,380
MIN. LOADING HEIGHT (mm) E 3,440 2,935
MAX. DIGGING HEIGHT (mm) F 9,760 10,045
MAX. BUCKET PIN HEIGHT (mm) G 8,435 8,720
MAX. VERTICAL WALL DEPTH (mm) H 4,470 4,835
MAX. RADIUS VERTICAL (mm) I 5,220 5,370
MAX. DEPTH 8' LINE (mm) J 5,240 5,640
MIN. RADIUS 8' LINE (mm) K 770 770
MIN. DIGGING REACH (mm) L 2,035 1,195
MIN SWING RADIUS (mm) M 3,035 2,795
BUCKET ANGLE (deg) d 178 178

MODEL DX170W-5 DOCUMENT NO. 28/33

DOOSAN INFRACORE CO. LTD.
2-4) TWO-PIECE BOOM [FEET]

BOOM TYPE 17' 1" TWO-PIECE BOOM

ARM TYPE 6' 11" ARM 8' 2" ARM

BUCKET TYPE (SAE) (yd3) 0.99 0.86

MAX. DIGGING REACH (ft) A 28' 7" 29' 10"
MAX. DIGGING REACH(GROUND) (ft) B 28' 29' 3"
MAX DIGGING DEPTH (ft) C 17' 7" 18' 10"
MAX. LOADING HEIGHT (ft) D 23' 3" 24' 3"
MIN. LOADING HEIGHT (ft) E 11' 3" 9' 8"
MAX. DIGGING HEIGHT (ft) F 32' 0" 32' 11"
MAX. BUCKET PIN HEIGHT (ft) G 27' 8" 28' 7"
MAX. VERTICAL WALL DEPTH (ft) H 14' 8" 15' 10"
MAX. RADIUS VERTICAL (ft) I 17' 2" 17' 7"
MAX. DEPTH 8' LINE (ft) J 17' 2" 18' 6"
MIN. RADIUS 8' LINE (ft) K 2' 6" 2' 6"
MIN. DIGGING REACH (ft) L - -
MIN SWING RADIUS (ft) M 9' 11" 9' 2"
BUCKET ANGLE (deg) d 178 178

MODEL DX170W-5 DOCUMENT NO. 29/33

DOOSAN INFRACORE CO. LTD.
10. PERFORMANCE DATA

1) SET PRESSURE
MAIN RELIEF (WORKING) : 34.3+0.6MPa (36.3+1MPa)
MAIN RELIEF (TRAVELLING) : 34.3+0.6MPa
PORT RELIEF (BOOM,ARM,BUCKET) : 37.3 ± 0.5 MPa
SWING MOTOR RELIEF : 27.5 MPa
TRAVEL MOTOR RELIEF : 37 MPa
TRANSMISSION PRESSURE RANGE : 2.5~3.1 MPa

2) ACTUATOR SPEED

OPERATION UNIT POWERMODE REMARKS

UP SEC 3.3±0.4
ONE-PIECE BOOM
DOWN SEC 3.3±0.4

UP SEC 6.3±0.5
TWO-PIECE BOOM OPTION
DUMP SEC 4.2±0.5

DUMP SEC 2.5±0.3

ARM
CROWD SEC 3.1±0.4

DUMP SEC 2.5±0.3

BUCKET
CROWD SEC 4.1±0.5

SWING (3 REVOLUTIONS) SEC 16.8±1.5

UP SEC 1.6±0.3
DOZER
DOWN SEC 1.8±0.3

UP SEC 3.7±0.4
OUTRIGGER OPTION
DOWN SEC 4.7±0.4

HIGH SEC 3,310±50

PROPELLER
LOW SEC 840±50
SHAFT
CREEP SEC 258±30

TRAVEL SPEED km/h MIN.37+

BRAKING DISTANCE m 11/33km/h

MODEL DX170W-5 DOCUMENT NO. 30/33

DOOSAN INFRACORE CO. LTD.
11. NOISE LEVEL

LWA GUARANTEED SOUND POWER LEVEL : 102 dB(A) (2000/14/EC)

MESSURED SOUND POWER LEVEL : 100 dB(A) (2000/14/EC)
LpA OPERATOR NOISE : 70 dB(A) (ISO 6396)

12. SUB GROUP WEIGHT

ITEM UNIT FIGURE REMARKS

UPPER STRUCTURE W/O FRONT kg 8,249 INCL. COUNTER WEIGHT
UNDER CARRIAGE kg 6,363 INCL. S/B, F-DOZ & R-OR
FRONT ASSEMBLY kg 2,803
COUNTER WEIGHT kg 3,220
BOOM (WITH BUSHING) kg 919 5100 mm
ARM (WITH BUSHING) kg 461 2500 mm
BUCKET kg 496 0.66 m3
BOOM CYL. (ea) kg 150
ARM CYL. kg 199
BUCKET CYL. kg 110
DOZER kg 710
DOZER CYL (ea) kg 61
OUTRIGGER kg 1,056
OUTRIGGER CYL (ea) kg 103
UPPER kg 751 WITH BUSHING
TWO-PIECE BOOM LOWER kg 433 WITH BUSHING
OPTION CYL. kg 196
SHORT kg 428 2100 mm
ARM LONG kg 524 3000 mm
LONG kg - - mm
BOOM kg - - mm
COUNTER WEIGHT kg -

MODEL DX170W-5 DOCUMENT NO. 31/33

DOOSAN INFRACORE CO. LTD.
 13. USER SERVICE DATA(V17W)
SERVICE INTERVAL [Hours]
No. ITEMS TO CHECK SERVICE Q’ty
10 50 250 500 1000 2000 4500
1)
1 Arm, Bucket Joint Pin Grease 6(6) F100 W10
2 Boom, Arm Joint Pin 1) Grease 11(15) F100 W10
3 Swing Bearing Grease 2 W10
4 Pinion Gear (Swing) Grease 1
Swing Reduction Gear Grease 1 W10
5
Swing Reduction Gear Gear Oil 3L V F
6 Front Axle Knuckle Grease 4 W10
7 Engine Oil Engine Oil 22 L V F
8 Hydraulic Oil Tank 2) Hydraulic Oil 148(96)L V
9 Fuel Tank 3) Diesel 280(275)L V D
Pre Fuel Filter and Water
10 Cartridge 1 V,D
Separator
11 Coolant Coolant 29.4 L V
12 Hydraulic Oil Return Filter Element 1 F
13 Pilot Filter Element 1 F
14 Hydraulic Oil Suction Strainer Strainer 1 C

15 Engine Oil Filter Cartridge 1 F

16 Main Fuel Filter Cartridge 1

Air Cleaner (Outer) Element 1 C
17
Air Cleaner (Inner) Element 1
Air Conditioner Filter (Outer) Element 1 C
18
Air Conditioner Filter (Outer) Element 1 C
19 Brake Filter Element 1 F
20 Front Axle Pin Grease 2 W10
Axle Case (Front) Gear Oil 10.5 L F
21
Axle Case (Rear) Gear Oil 14.0 L F
Hub Reduction Gear Case (Front) Gear Oil 2 x 2.5 L F
22
Hub Reduction Gear Case (Rear) Gear Oil 2 x 2.5 L F
23 Transmission Engine Oil 2.5 L F
24 Dozer Blade Pin Grease 12 F100 W10
25 Outrigger Frame Pins Grease 8 F100 W10
26 Drive Shafts Grease 8 W10
27 Air Breather Filter* Element 1
28 Fuel Cap Filter Element 1
29 Air Compressor Filter (Opt) Cartridge 1 C
30 DEF (AdBlue) Filter Element 1
31 DEF (AdBlue) Tank DEF 31.5 L V
Radiator Core Core 1 C
Fuel cooler Core Core 1 C

MODEL DX170W-5 DWG No. 33/33

DDoooossaann IInnffrraaccoorree CCoo..,, LLTTDD...
 Oil Cooler Core Core 1 C
Intercooler Core Core 1 C
Aircon Condenser Core Core 1 C
V: Maintenance and Refill.
C: Cleaning.
D: Drain Water.
F: First Time Exchange Only.
F100: Every 10 Hours For First 100 Hours.
W10: Every 10 Hours If Operating In Water.
: Replacement On Every Interval.
1) One piece BOOM(Two piece BOOM)
2) Total Tank Capacity(Level)
3) Total Tank Capacity (max. possible refueling volume)

15 CIRCUITS

- HYDRAULIC CIRCUIT : 950102-00257

- ELECTRIC CIRCUIT : 950102-00244A

MODEL DX170W-5 DWG No. 33/33

DDoooossaann IInnffrraaccoorree CCoo..,, LLTTDD...