Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Parts - Washing Equipment - 6048 - SPEC - Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

STINGRAY 6048

METRIC SPECIFICATIONS
Standard Features & General Construction:
Green Technology: Closed Loop Zero Discharge
Swing Door Retracting Turntable for Maximum Access
Electronic Water Level Control & Refill
Oscillating Wash Manifold to Maximize Cleaning
Easy to Service Front Wash Pump Suction Strainer
Adjustable Electronic Temp Control, Temp Gage
Control Transformer External of Panel minimizes Heat
Programmable 24 Hour 7 Day Clock
Low Water Shut-Off Protects Pumps & Heating System
Electronic Door Safety Interlock
Wash Cycle Timer with Auto Reset
Heavy gage 4.7 mm Sheet Steel Cabinet Thickness
230 V or 460 V- 60 Hz 3-Phase with 120 V Controls
Optional: 380 V / 415 V - 50 Hz 3-Phase
Chemical Resistant Two Part, 3 mm Epoxy Coating

Spray Manifold: Overall Dimensions: Work Area Dimensions:


OSCILLATING NON- SYNCHRONOUS Width: (Std Unit) 2690 mm Turntable Diameter: 1520 mm
Angle of Oscillation: 39 degrees Depth: (Std Unit) 2310 mm Work Height: 1210 mm
Frequency of Oscillation: 4 per minute Height: 2360 mm Table Load Capacity: 1360 kg
Number of Wash Nozzles: 20 Empty Weight: 3020 kg Heavy Duty Capacity: 3170 kg
Type of Nozzle: Flat Tapered V-Jet Reservoir Capacity: 1330 liters
Nozzle Material: 316 Stainless Duplex Reservoir: Add 178 liters
Nozzle Spray Pattern: 25 degrees Sludge Capacity: 303 liters

Heat System: Electrical:


Operating Temperature: 60 - 88 degrees C Wiring Standard: NFPA 79 Motor Rating: Continuous Duty
Initial Heat-Up Time: 70 - 120 minutes Motor Starters: IEC Type 2 Enclosures: TEFC/NEMA 12
Electric Heat Element Size STD: 60 kW Short Circuit Protection: Coordinated Enclosures: IP65
High-Output Electric Heat: 80 kW Overload Protection: Thermal Class 10 Wiring Conduit: Flex- Non-Metallic
Gas/Propane Eclipse 80% Eff: 117 kW Motor Type: NEMA MG-1 Type of Conduit: Liquidtight IP65

Pump System & Performance:


High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.
Note: All performance data taken at nozzle discharge.

STANDARD: UPGRADES: (Simplex) UPGRADES: (Duplex)


15 kW 22 kW 30 kW 41 kW 52 kW
Total System Flow: 1020 lpm 1140 lpm 1200 lpm 1350 lpm 1400 lpm
Flow per Nozzle: 51 lpm 57 lpm 61 lpm 67 lpm 70 lpm
System Pressure: 7.4 bar 9.2 bar 10.5 bar 12.9 bar 14.0 bar
Blast Velocity: 38 mps 43 mps 45 mps 51 mps 53 mps

Results may vary based on machine configuration.


6048
STINGRAY MANUFACTURING
2450 Adie Road  St. Louis, MO 63043 USA
Phone: (314)447-9000  Fax: (314)447-0909
Email: sales@stingwash.com  www.stingwash.com

You might also like