Mining Excavator R 9400

Operating Weight with Backhoe Attachment: 345.500 kg / 760,600 lb

Operating Weight with Shovel Attachment: 353.000 kg / 778,200 lb
Engine Output: 1.250 kW / 1,675 HP
Bucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m³ / 28.8 yd³
Shovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m³ / 28.8 yd³
R 9400
Operating Weight with Backhoe Attachment: 345.500 kg / 760,600 lb
Operating Weight with Shovel Attachment: 353.000 kg / 778,200 lb
Engine Output: 1.250 kW / 1,675 HP
Bucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m³ / 28.8 yd³
Shovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m³ / 28.8 yd³

2 R 9400
Productivity Customer Support
Liebherr Mining Equipment enables superior productivity Liebherr builds more than just mining equipment; Liebherr
by loading and hauling maximum tonnage in the shortest also builds customer partnerships.
amount of time.
Safety
Efficiency Mining demands an ever-vigilant focus on safety, and
Liebherr combines the proven capabilities of previous Liebherr strictly adheres to industry standards. Liebherr
models with new features that improve operational equipment is designed to diminish risk even under the
efficiency. most extreme mining conditions.

Reliability Environment
To maximize equipment reliability, Liebherr combines Liebherr optimizes mining equipment for fuel economy,
manufacturing expertise with monitoring and diagnostic emission compliance, and extended service intervals.
capabilities.

R 9400 3
 Engine / Motor Options
Diesel engine:
• Cummins QSK 50 (USA/EPA Tier2)
• Fuel consumption optimized version
(option)
Electrical motor (option):
• 3 phase AC squirrel cage motor
• Voltage on request
• 50 or 60 Hz frequency

4 R 9400
 Productivity
The R 9400 is built to outperform all competitors in the medium class mining market.
Boasting a 22,00 m³ / 28.8 yd³ bucket capacity in standard configuration, the R 9400
is the ideal machine to load a fleet of 135 t dump trucks. Available in both diesel or
electric versions, the R 9400 offers the flexibility to perform many specific applications.

Engineered for Intense Mining

Powerful Drive System The R 9400 is equipped with a Cummins diesel
engine which has been specifically adapted to
withstand the most extreme environments and to
reach the highest uptime performance for maximum
productivity. The electric drive system provides
superior performance when the machine is used in
the most specific conditions.
Optimized Cycle Times Rather than using open hydraulic circuit, the R 9400
employs a closed-loop swing circuit to enable maxi-
mum swing torque while retaining the full oil flow for
the working circuit. The independent swing circuit in
combination with the powerful drive system leads to
fast arm motion, which contributes to faster cycle times.
Precise Machine The R 9400 design integrates the Litronic Plus electronic
Motions control system to allow for easy control even when
simultaneous movements are required. The patented
Liebherr electronic damping system provides controlled
end-cushioning for smooth attachment motions.

High Digging and Lifting Capabilities

High Digging Forces Designed for the best mechanical force distribution, the
production-tailored attachment delivers high digging
and lifting forces. Integrating Liebherr-made cylinders
and a wide range of buckets with mining-optimized
GET, the R 9400’s attachment ensures the highest
forces, easy bucket penetration and high fill factor to
perform even in the most demanding conditions.
Power-Oriented The R 9400’s attachment is equipped with the pres-
Energy Management sureless boom down function to enable fast cylinder
retraction without the need for pump energy. Intel-
ligent energy management diverts the pump flow
during boom lowering, allowing other cylinder
motions to operate unimpeded.

Electronic Cylinder Damping Liebherr Ground Engaging Tools (GET)

System
Liebherr has developed a complete mining GET
• Patented system based on solution to complement Liebherr’s mining back-
electronic control hoe and face shovel bucket design. A synergy
• Controlled end-cushioning for that enables easy material penetration while
smooth attachment motions extending the life of the bucket.
• Allows the operator to focus on • Three tooth profiles and five tooth sizes
loading • Innovative bucket lip and side wall protection
• Intelligent energy management • One single locking system that limits tooling
by energy saving to one unique extraction tool
• Increase of cylinders reliability • Unique hammerless locking system
• Effortless and quick tooth removal

R 9400 5
 Hydraulic System Efficiency
The R 9400’s hydraulic system is designed
for an optimized hydraulic power manage-
ment via the:
• Closed-loop swing circuit
• Pressureless boom down function
• Electronic hydraulic pumps management
• High pressure hydraulic oil filtration system
• Electro-hydraulic control system
• Optimized pipe and hose layout

6 R 9400
 Efficiency
The R 9400 follows the Liebherr design philosophy of maximizing the machines
performance by improving the efficiency of all individual subsystems. Engineered
for optimum serviceability the machine is designed to ensure maximum uptime.
The R 9400’s spacious cab creates a comfortable working environment ensuring
peak operator performance, every shift.

Optimized for Maximum Profitability

Electro-Hydraulic Liebherr hydraulic technology in combination with
System Efficiency the precision of electronic control contributes to the
R 9400’s energy optimization. The high-pressure hy-
draulic system and the optimized pipe and hose layout
maximize usable power transmission. The hydraulic
pumps are electronically managed to provide optimal
pressure compensation and oil flow management. The
hydraulic system is independently regulated over the
engine circuit for the best operational efficiency.
Cooling System The oversized independent oil- and water coolers
Efficiency in combination with low energy consumption fans
and on-demand cooling controls enable to maximize
available power for digging process.
Optimized Service The R 9400’s high pressure hydraulic oil filtration
Intervals systems remove contaminants from the fluid to offer
the highest rate of hydraulic system efficiency. To
maintain the oil quality, all return hydraulic oil flow goes
through a 15/5 μm fine filtration system. To promote
availability, the grease and fuel tanks are sized to con-
siderably extend the time between service intervals.

Comfortable Cab for Efficient Work

Superior Operator The large and spacious cab which equips the
Comfort R 9400 offers ideal working conditions and optimal
operator’s comfort. Mounted on silent blocks, the cab
design reduces vibrations and limit noise pollution
to provide a quiet environment.
Working Environment The R 9400’s cab offers a panoramic view over the
Total Control entire attachment and loading spot. Two outside
cameras show areas that cannot be observed
directly. Long-distance halogen working lights
promote efficient loading.
Fast Maintenance System Comfort-Oriented Cab Design
The service flap is hydraulically An array of features:
actuated and accessible from • Tinted laminated safety glass
the ground level allowing for fast
• Armored front and attachment side windows
maintenance:
• Heavy duty sun louvers on windows
• Hydraulic oil refill
• Adjustable air suspended seat
• Engine oil refill and drainage
• A/C with dust filter in fresh air / recirculated
• Splitter box and swing gearbox
oil exchange • Pressurization to prevent dust penetration
• Attachment/swing ring bearing • Trainer seat
grease barrel refilling with filters
• Windshield washer water refilling
• Fast fuel refilling line

R 9400 7
 Liebherr Vertical Integration
Liebherr-made integrated parts are:
• Electronic and control technology
• Hydraulic cylinders
• Large diameter bearing (swing ring)
• Swing and travel drives
• Ground Engaging Tools

8 R 9400
 Reliability
More than 50 years of hydraulic excavator design and manufacturing experience
is the basis for the R 9400’s outstanding reliability. The machine combines innova-
tive technologies, design optimization and Liebherr components. Customers can
expect durable performance from the R 9400 throughout the machine’s life.

Quality: the Liebherr Trademark

Liebherr Vertical As an OEM, Liebherr has built a solid reputation for its
Integration development and production of high quality strategic
mining components. The R 9400 integrates robust and
reliable mining optimized components that are devel-
oped, manufactured and controlled by Liebherr ensuring
reliability and high performance for the entire machine.
Machine Reliability Based on years of experience and the systematic mea-
Survey surement of key performance indicators of the machine
behavior in the field, the Liebherr Mining Reliability
Engineering Group is constantly seeking new ways to
enhance reliability.
Quality Management Liebherr quality begins during machine design and simu-
Continuous Improvement lations. Liebherr meets the highest standards for special
selections of steels and casting materials. Based on the
expertise of certified internal auditors and a highly quali-
fied workforce, all manufacturing process steps are de-
vised to provide the most comprehensive control, moni-
toring and traceability. Liebherr-Mining Equipment Colmar
SAS is ISO 9001 certified.

Long-lasting Job Performances

Maximized Compo- The R 9400 is equipped with an automatic central lu-
nents Lifetime brication system for the entire attachment and swing
ring. All greasing points are suitably protected against
external damages. This extends component life and
ensures constant performance over the excavators’
operational life.
Rugged Undercarriage The R 9400 is mounted on a heavy duty 3-piece fatigue
Structure resistant undercarriage steel structure. This design pro-
vides better weight distribution of the superstructure and
reduces ground bearing pressure. Designed and built
for both shovel and backhoe configurations, the R 9400
provides the necessary stability and reliability.

Strengthened Attachment Design Arctic Kit (Option)

Backhoe or face shovel attachments Designed for maximum reliability in regions
are built to face all standard and with temperatures of down to -50°C / -58°F:
specific applications: • Integrated into machine structure
• Use of advanced welding techniques • For maximum efficiency
• Reinforced with strategically located • Increases machine and component lifetime
castings in high stress areas
• Optimum operator comfort even in harsh
• Heat treatment to reduce residual temperature conditions
stresses and increase fatigue life
• Designed for maximum structure life
• Use of cutting-edge engineering
tools such as Finite Element
Analysis and Fatigue Life Analysis

R 9400 9
 Liebherr Service Tools
Liebherr delivers a wide range of service
tools for excavator-specific maintenance
ensuring optimal working conditions no
matter the size of the component.
• An OEM-certified solution
• Maximized machine uptime
• Cost-efficient maintenance
• Easy machine serviceability
• Uncompromising operational safety

10 R 9400
 Customer Support
As a global mining solutions provider, Liebherr is more than a mining equipment
manufacturer. Ensuring a permanent dialogue with each machine owner, Liebherr
provides tailored assistance to customer specific projects and site requirements.

Proactive Service Supplying

Liebherr Mining Network With a truly global network composed of Liebherr affili-
ates and exclusive representatives, Liebherr’s worldwide
presence enables the highest level of service support
irrespective of equipment location. Using advanced fore-
casting techniques and in-depth knowledge of regional
populations, Liebherr service centers ensure that
customers always have timely access to spare parts.
Customized Service Liebherr tailored support solutions integrate com-
Support ponents exchange and management agreements,
service and maintenance on site or maintenance
management agreements. Liebherr’s highly-trained
service personnel ensures preventive and scheduled
maintenance tasks and provides emergency service.
Service Engineering Machines and components reliability data are collected
Support and monitored through the Liebherr maintenance
management system. Liebherr’s sales and service
organization and product engineering groups provide
fast and proactive support over the lifetime of the
machine and promote mutual benefit for all involved.

Customer Value Management

Liebherr Mining The Liebherr Mining Exchange Components program
Exchange Components enables customers to minimize the total machine’s
Owning and Operating Cost while maintaining peak
productivity and reliability. Through 15 Liebherr-
certified component rebuild facilities worldwide,
customers can take advantage of this program
regardless of the equipment location or fleet size.
Complete Training The Liebherr Mining Training System provides
Programs operator and maintenance staff blended training
sessions that encourage productive, cost-effective
and safe mining operation. The Liebherr Mining
Training System employs online learning programs,
factory and on-site sessions and simulator training.

Liebherr Mining From-Cradle-To-Grave Support

Exchange Components
• Customer specific requirement study
Exchange and repair programs for • Collaborative solution development
components are conducted by
Liebherr-certified rebuild facilities • On-site machine assembly
using the latest OEM rebuild speci- • On-site machine settings
fications and the complete range of • Training program on / off site
genuine Liebherr parts to ensure:
• Machine performance monitoring
• Value: significantly reduce total
• Spare parts supply
cost of ownership
• Parts remanufacturing facilities
• Quality: guaranteed as-new
performance and reliability
• Availability: global network of
components rebuild facilities

R 9400 11
 Machine Access
Designed for safe access on the
machine upperstructure via:
• A 45° powered stairway and catwalks
with handrails and perforated steps
• Walkways with slip-resistant surfaces
• Emergency egress with handrails in
front of the excavator

12 R 9400
 Safety
The Liebherr R 9400 provides uncompromising safety for operators and
maintenance crews. Equipped with the service flap accessible from the ground
level and integrating wide open accesses, the R 9400 allows quick and safe
maintenance. The R 9400’s cab provides numerous features for operator safety.

Service-Friendly Machine Design

Safe Service Access The R 9400’s top structure is accessible via a pow-
ered 45° stairway as standard. The robust service
flap provides easy access to the main servicing
points from the ground level.
Easy Inspection All components have been located in areas that allow
and Components for effortless inspection and replacement. The R 9400
Replacement is equipped with robust hinged louvers for easy
cleaning and maintenance. Numerous service lights
are strategically located in the main service areas to
sustain suitable maintenance conditions, day or night.
Secure Maintenance The R 9400 eliminates hazards ensuring a safe
environment for the service staff during maintenance.
Emergency stops are strategically located at ground
level, in the cab, in hydraulic and engine compart-
ments. The battery switches are manually operated
to safely isolate the battery power. The attachment
can safely be lowered to the ground even if the
engine is off.

Safety First Working Conditions

Safety-First Cab Design In addition to its ergonomic design, the R 9400’s cab
provides maximum protection for the operator. The
structure is composed of strong, low stress tubing
and safety glass. The Falling Object Protection
System (FOPS) and the armored front and attach-
ment side windows enable to create a safe working
environment for the operator.
Powerpack Provision The powerpack module integrates a protection wall
of Security that separates the engine from the hydraulic pumps.
This reduces the risk of hydraulic oil entering the
engine compartment. The turbochargers and exhaust
systems are heat shielded, and the hydraulic hoses
are made from a highly resistant material.

Machine Improved Visibility Rear and Side Vision System

The machine is easily visible even The machine ergonomically integrates a rear and
by night or in extremely dusty working side vision system composed of:
environments thanks to: • One camera on counterweight
• Eight long-range working halogen • One camera on right-hand side of uppercarriage
lights located on attachment,
• One LCD color screen to display cameras view
uppercarriage and counterweight
• Xenon or LED lights in option
• Travel alarm system with light
and buzzer

R 9400 13
 Electric Drive Version
The electric drive system is an efficient
alternative to diesel engine allowing:
• Less vibration resulting in higher
component lifetime
• Lower maintenance costs
• Less noise pollution
• High motor efficiency
• Maximum efficiency in cold climate
conditions when combined with the
Arctic Kit

14 R 9400
 Environment
Liebherr considers the preservation of the environment as a major challenge
for the present and future. Sustainability underpins Liebherr’s machines; from
raw materials selection to manufacturing process employed. Liebherr provides
solutions that allow customers to balance high performance with environmental
consciousness.

Minimized Impact on Life

Optimized Fuel Constant power regulation of the hydraulic system
Consumption and engine output optimizes equipment fuel
efficiency, depending on the application. Fan coolers
speed is adjusted on-demand in order to optimize
energy consumption. The automatic idling system
reduces the engine speed when the machine is at rest.
Controlled Emission The R 9400 is powered by a high horsepower
Rejections diesel engine which complies with the USA/EPA
Tier 2 emissions limits. The electric drive version
is an efficient alternative for applications that do
not require frequent machine relocation. The pow-
er system makes the R 9400 cost effective with-
out compromising productivity whilst reducing the
machines impact on the environment.

Sustainable Design and Manufacturing Process

Extended Components Liebherr is constantly working on ways to extend
and Fluids Lifetime component life. Through the Exchange Components
program, superior lubrication systems, and the
reinforcement of parts under stress, Liebherr can
reduce frequency of part replacement. The result
minimizes environmental impact and lowers the
overall cost of ownership.
Product Life-Cycle Subject to the stringent European Program for the
Management regulation of the use of chemical substances in the
manufacturing process REACH*, Liebherr under-
takes a global evaluation to minimize the impacts of
hazardous materials.

*REACH is the European Community Regulation on chemicals and their safe use (EC1907/2006)
It deals with the Registration, Evaluation, Authorization and Restriction of Chemical Substances.

Sound Attenuation Kit (Option) Sustainable Manufacturing Process

Developed with the latest noise With an ever-present green focus, Liebherr
measurement technologies, this contributes to the sustainable development:
approach is based on both removal • Systematic risk analysis for new materials
of noise at the source and passive qualification
sound attenuation:
• Promoted recovery waste management
• Noise-optimized fan regulation
• Controlled non-recyclable waste elimination
• Larger and additional mufflers
• Eco-friendly material selection
with tail pipe absorbers
(95% of material used on machine is recyclable)
• Sound attenuation on louvers,
doors and walls
• Additional high volume sound
attenuation boxes

R 9400 15
 Technical Data
Engine Electro-Hydraulic Controls
1 Cummins diesel engine Servo circuit �������������������� independent, electric over hydraulic
Rating per ­proportional controls of each function
SAE J 1995 ���������������� 1.250 kW/1,675 HP at 1,800 rpm Emergency control ������ via accumulator for all attachment
Model ������������������������ Cummins QSK50 ­functions with stopped engine
(USA/EPA Tier 2 or fuel consumption Power distribution ������������ via monoblock control valves with
­optimized setting) ­integrated primary relief valves and
Type �������������������������� 16 cylinder turbocharged V-engine ­flanged on secondary valves
after-cooler Flow summation ��������� to attachment and travel drive
two separate water cooling circuits Control functions
common rail Attachment and
Displacement ������������� 50,3 l/3,069 in3 swing ������������������������ proportional via joystick levers
Bore/Stroke ���������������� 159/159 mm / 6.26/6.26 in Travel ������������������������ proportional via foot pedals or hand levers
Engine cooling system ������ fans driven via hydraulic piston motor Bottom dump bucket �� proportional via foot pedals
Air cleaner ����������������������� dry-type air cleaner with pre-cleaner, with
automatic dust ejector, primary and safety
elements
Fuel tank ������������������������� 6.908 l/1,825 gal Electric System
Electrical system
Voltage ���������������������� 24 V Electric isolation ��������������� easy accessible battery isolations
Batteries �������������������� 4 (+ 2) x 170 Ah/12 V Working lights ������������������ high brightness halogen lights:
Alternator ������������������� 24 V/260 Amp – 2 on working attachment
Engine idling �������������������� sensor controlled – 1 on RHS of uppercarriage
Electronic engine – 3 on LHS of uppercarriage
power management ���������� engine power and speed sensing over the – 2 on counterweight
entire engine rpm range Xenon or LED lights in option
Emergency stop switches �� at ground level, in hydraulic compartment,
in engine compartment and in operator cab
Electrical wiring ���������������� heavy duty execution in IP 65 standard for
Electric Motor (optional) operating conditions of – 50 °C to 100 °C/
– 58 °F to 212 °F
1 electric motor
Power output ������������������� 1.350 kW/1,810 HP
Type ������������������������������� 3 phase AC squirrel cage motor
Voltage ���������������������������� 6,000 V, other voltage on request Swing Drive
Frequency ����������������������� 50 Hz (or 60 Hz)
Revolutions ���������������������� 1,500 rpm or 1,800 rpm Hydraulic motor ���������������� 2 Liebherr axial piston motors
Motor cooling ������������������ integrated air-to-air heat exchanger Swing gear ���������������������� 2 Liebherr planetary reduction gears
Starting method ��������������� inrush current limited to 2,2 full load current Swing ring ����������������������� Liebherr, sealed triple roller swing ring,
internal teeth
Swing speed �������������������� 0 – 3.9 rpm
Swing-holding brake ��������� hydraulically released, maintenance-free,
Hydraulic System multi-disc brakes integrated in each swing
gear
Hydraulic pumps
for attachment and
travel drive ����������������� 4 variable flow axial piston pumps
Max. flow ������������������� 4 x 751 l/min. / 4 x 198 gpm Uppercarriage
Max. hydr. pressure ���� 320 bar/4,640 psi
Hydraulic pump Design ���������������������������� torque resistant designed upper frame in
for swing drive ������������ 2 reversible swash plate pumps, box type construction for superior strength
­closed-loop circuit and durability
Max. flow ������������������� 2 x 390 l/min. / 2 x 103 gpm Attachment mounting ������� parallel longitudinal main girders in
Max. hydr. pressure ���� 350 bar/5,076 psi ­box-section construction
Pump management ���������� electronically controlled pressure and flow Machine access ��������������� 45° access system with handrails on the
management with oil flow optimisation cab side of the uppercarriage. Full con-
Hydraulic tank capacity ����� 2.200 l/581 gal trolled descent in case of emergency stop.
Hydraulic system Additional emergency ladder fitted near the
capacity �������������������������� 4.200 l/1,110 gal cab
Hydraulic oil filter �������������� 1 high pressure safety filter after each high
pressure pump + fine filtration of entire
return flow (15/5 μm)
Hydraulic oil cooler ����������� 2 separate coolers, 2 temperature
­controlled fans driven via hydraulic piston
motor

16 R 9400
 Technical Data
Operator’s Cab Service Flap
Design ���������������������������� resiliently mounted, sound insulated, Design ���������������������������� hydraulically actuated service flap, with
large windows for all around visibility, lighting easily accessible from ground level
integrated falling object protection FOPS to allow:
Operator’s seat ���������������� suspended, body-contoured with shock – fuel fast refill
absorber, adjustable to operator’s weight – hydraulic oil refill
Cabin windows ���������������� 20,5 mm/0.8 in tinted armored glass for – engine oil quick change
front window and 18 mm/0.7 in for right – splitterbox oil quick change
hand side windows, all other windows in – swing gearbox oil quick change
tinted safety glass, – swing ring teeth grease barrel refilling via
high pressure windshield-washer system grease filter
75 l/20 gal watertank, – attachment/swing ring bearing grease
aluminium sun louvers on all windows barrel refilling via grease filter
Heating system/ – windshield wash water refilling
Air conditioning ���������������� heavy duty, fully automatic, high output air Quick couplers on request
conditioner and heater unit
Cabin pressurization ��������� ventilation with filter
Controls �������������������������� joystick levers integrated into armrest of
seat Central Lubrication System
Monitoring ����������������������� via LCD-Display, data memory
Rear vision system ������������ camera installation on counterweight and Type ������������������������������� Lincoln Centromatic lubrication system for
right-hand side of the uppercarriage dis­ the entire attachment/swing ring bearing
played over an additional LCD-display and teeth
Automatic engine Grease pumps ����������������� Lincoln Powermaster pump plus separate
shut off ���������������������������� engine self-controlled shut off Flowmaster pump for swing ring teeth
Destroking of main Capacity �������������������������� 200 l/53 gal bulk container for attachment/
pumps ���������������������������� in case of low hydraulic oil level swing ring bearing, separated 80 l/21 gal
Safety functions ��������������� additional gauges with constant display for: ­container for swing ring teeth
engine speed, hourmeter, voltmeter, safety Refill ������������������������������� via the service flap for both containers,
mode for engine speed control and pump fill lines with grease filter
regulation
Noise level (ISO 6396) ������� Diesel: LpA (inside cab) = 78 dB(A)
with oil/water fans at 100 % and AC fan
at 65 % Attachment
Design ���������������������������� box-type structure with large steel castings
in all high-stress areas
Undercarriage Pivots ����������������������������� sealed with double side centering with
1 single floating pin per side, all bearings
Design ���������������������������� 3-piece undercarriage, box type structures with wear resistant steel bushings, bolts
for center piece and side frames (stress hardened and chrominium-plated
relieved steel work component as a stand­ Hydraulic cylinder ������������� Liebherr design and made, all cylinders
ard) located in well protected areas
Hydraulic motor ���������������� 2 axial piston motors per side frame Hydraulic connections ������ pipes and hoses equipped with SAE
Travel gear ����������������������� Liebherr planetery reduction gear ­split-flange connections
Travel speed �������������������� 0 – 2,7 km/h / 0 – 1.67 mph Kinematics ���������������������� Liebherr parallel face shovel attachment
Parking brake ������������������� spring engaged, hydraulically pressure geometry, backhoe bucket pivoting angle
­released external wet multi-disc brakes for 150°, electronic controlled end-cushioning
each travel motor, maintenance-free
Track components ������������ maintenance-free,
forged double grouser pad, tractor-type
chain, optional maintenance-free dual pin
cast link and pad combined
Track rollers/
Carrier rollers ������������������� 9/2 per side frame
Automatic track tensioner �� pressurized hydraulic cylinder with
­accumulator
Transport ������������������������ undercarriage side frames are removable

 R 9400 17
 Dimensions
F E A2
D A1
A

OEL H3
W1 H2 C
W H1
H

K P
Q

L N
U S
Z B
V G
X

 mm/ft in  mm/ft in
A 6.405/21’   K 2.434/  7’11”
A1 7.184/23’  6” L 6.645/21’  9”
A2 7.900/25’10” N 1.000/  3’  3”
B 6.516/21’  4” P 2.494/  8’  2”
C 7.957/26’  1” Q 1.187/  3’10”
D 6.400/20’11” S 5.516/18’  1”
E 6.665/21’10” U 8.825/28’11”
F 3.100/10’  2” V 13.279/43’  6”
G 6.926/22’  8” W 8.421/27’  7”
H 5.664/18’  6” W1 9.243/30’  3”
H1 6.653/21’  9” X 18.560/60’10”
H2 7.227/23’  8” Z 10.657/34’11”
H3 8.343/27’  4” OEL Operator’s Eye Level 6.740/22’  1”

F E A2
D A1
A

OEL
H3
W1 H2 C
W H1
H

K P
Q

L N
U S
Z B
V G
X

 mm/ft in  mm/ft in
A 6.405/21’   K 2.434/  7’11”
A1 7.184/23’  6” L 6.645/21’  9”
A2 7.900/25’10” N 1.000/  3’  3”
B 6.516/21’  4” P 2.494/  8’  2”
C 7.957/26’  1” Q 1.187/  3’10”
D 6.400/20’11” S 5.516/18’  1”
E 6.665/21’10” U 8.825/28’11”
F 3.100/10’  2” V 16.400/53’  9”
G 6.926/22’  8” W 6.800/22’  3”
H 5.664/18’  6” W1 8.100/26’  6”
H1 6.653/21’  9” X 20.600/67’  6”
H2 7.227/23’  8” Z 10.657/34’11”
H3 8.343/27’  4” OEL Operator’s Eye Level 6.740/22’  1”

18 R 9400
 Backhoe Attachment
with Gooseneck Boom 9,30 m/30’6”
ft m
55 Digging Envelope
16
50 Stick length 4,20 m/13’  9”
45 14

40 R 3750 Max. reach at ground level 16,30 m/53’  5”

12
Max. teeth height 15,50 m/50’10”
35 Max. dump height 10,50 m/34’  5”
10
30 Max. digging depth 9,50 m/31’  1”
25 8
Max. digging force (ISO 6015) 965 kN/216,940 lbf
20 6
Max. breakout force (ISO 6015) 1.000 kN/224,809 lbf
15
4
10
2
5
0 0 Operating Weight
-5
-2
and Ground Pressure
-10
-4 The operating weight includes the basic machine with backhoe
-15 attachment and a 22,00 m3/28.8 yd3 bucket.
-20 -6
Pad width mm/ft in 1.000/3’3”
-25 -8 Weight kg/lb 345.500/760,600
-30 Ground pressure * kg/cm2 / psi 2,33/33.11
-10
20 18 16 14 12 10 8 6 4 2 0 m * according to ISO 16754

65 60 55 50 45 40 35 30 25 20 15 10 5 0 ft

Buckets
For materials classe
according to VOB, Section C, DIN 18300 < 5 5 – 6 5 – 6 5 – 6 7 – 8 7–8
Typical operation
according to VOB, Section C, DIN 18300 GP HD HD HD XHD XHD
Capacity ISO 7451 m 3 24,00 18,00 22,00 24,00 18,00 20,00
yd3 31.4 23.5 28.8 31.4 23.5 26.2
Suitable for material up to a specific weight of t/m3 1,7 2,2 1,8 1,6 2,0 1,8
lb/yd3 2,867 3,710 3,035 2,698 3,373 3,035
Cutting width mm 3.900 3.400 3.700 3.900 3.400 3.700
ft in 12’9” 11’1” 12’1” 12’9” 11’1” 12’1”
Weight kg 22.000 23.000 23.000 23.800 24.500 25.000
lb 48,502 50,706 50,706 52,470 54,013 55,116
GP: General purpose bucket with Liebherr Z140 teeth
HD: Heavy-duty bucket with Liebherr Z140 teeth
XHD: Heavy-duty rock bucket with Liebherr Z140 teeth

 R 9400 19
 Shovel Attachment
with Shovel Boom 6,75 m/22’1”
ft m
18 Digging Envelope
55 17
16 Stick length 4,30 m/14’  1”
50 15
45 14 Max. reach at ground level 14,00 m/45’11”
13 Max. dump height 11,20 m/36’  8”
40 12 Max. crowd length 4,50 m/14’  9”
35 11 Bucket opening width T 2,50 m/  8’  2”
T
10
30 9 Crowd force at ground level (ISO 6015) 1.145 kN/257,406 lbf
25
8 Max. crowd force (ISO 6015) 1.545 kN/347,330 lbf
7 Max. breakout force (ISO 6015) 1.195 kN/268,646 lbf
20 6
5
15
4
10 3
2
Operating Weight
5
2 and Ground Pressure
0 0
-1 The operating weight includes the basic machine with shovel
-5 ­attachment and a 22,00 m3/28.8 yd3 bucket.
-2
-10 -3 Pad width mm/in 1.000/3’3”
-4 Weight kg/lb 353.000/778,200
-15
-5 Ground pressure * kg/cm2 / psi 2,38/33.83
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
* according to ISO 16754
50 45 40 35 30 25 20 15 10 5 0 ft

Bottom Dump Buckets

For materials classe
according to VOB, Section C, DIN 18300 < 5 < 5 5 – 6 5 – 6 7 – 8 7–8
Typical operation
according to VOB, Section C, DIN 18300 GP GP HD HD XHD XHD
Capacity ISO 7546 m 3 24,00 22,00 18,00 22,00 18,00 19,00
yd3 31.4 28.8 23.5 28.8 23.5 24.9
Suitable for material up to a specific weight of t/m3 1,6 1,8 2,2 1,8 2,1 1,9
lb/yd3 2,698 3,035 3,710 3,035 3,541 3,204
Cutting width mm 4.250 4.250 4.250 4.250 4.250 4.250
ft in 13’11” 13’11” 13’11” 13’11” 13’11” 13’11”
Weight kg 36.700 35.400 35.400 35.400 37.500 38.500
lb 80,910 78,044 78,044 78,044 82,673 84,878
Wear kit level I I II II III III
GP: General purpose bucket with Liebherr Z140 teeth
HD: Heavy-duty bucket with Liebherr Z140 teeth
XHD: Heavy-duty rock bucket
Level I: For non-abrasive materials, such as limestone, without flint inclusion, shot material or easily breakable rock,
i.e. deteriorated rock, soft limestone, shale, etc.
Level II: For preblasted heavy rock, or deteriorated, cracked material (classification 5 to 6, according to DIN 18300)
Level III: For highly-abrasive materials such as rock with a high silica content, sandstone etc.

20 R 9400
 Optional Equipment
Undercarriage Operator’s Cab
Different track pads width Front protective grid
Cast link/pad combined (1,000 mm width) 4-point seat belt
Double A/C system
Additional windscreen wipers for all windows

Uppercarriage
LED lights (with flood/access lights)
Xenon lights (with flood/access lights) Attachment
Fast fueling system with Multiflo & Wiggins/Banlaw coupling Cylinder – rod protection (bucket)
(other brand name couplings possible)
Greasing container with 2 grease pumps
Customized paint – compl. machine

Specific Solutions
Arctic kit – 30 °C
Arctic kit – 40 °C
Hydraulics Basic sound attenuation kit
Bio-degradable hydraulic oils Sound attenuation kit (until + 40 °C)
Oil cooler protection filter High altitude kit

Engine Safety
Fuel consumption optimized version Automatic fire fighting system (FFS)
Automatic engine shutdown (5 min.)
Cummins Cense™ Kit
Cummins Eliminator™ Kit
Cummins Centinel™ Kit

 R 9400 21
The Liebherr Group of Companies

Wide Product Range State-of-the-art Technology

All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
The Liebherr Group is one of the largest construction To provide consistent, top quality products, Liebherr
equipment manufacturers in the world. Liebherr’s attaches great importance to each product area, its
high­value products and services enjoy a high reputation components and core technologies. Important modules
in many other fields. The wide range includes domestic and components are developed and manufactured
appliances, aerospace and transportation systems, in­house, for instance the entire drive and control
machine tools and maritime cranes. technology for construction equipment.

Exceptional Customer Benefit Worldwide and Independent
Every product line provides a complete range of models Hans Liebherr founded the Liebherr family company in
in many different versions. With both their technical 1949. Since that time, the enterprise has steadily grown
excellence and acknowledged quality, Liebherr products to  a  group of more than 130 companies with over
offer a maximum of customer benefits in practical 38,000 employees located on all continents. The corporate
application. headquarters of the Group is Liebherr­International AG
in Bulle, Switzerland. The Liebherr family is the sole owner
of the company.

www.liebherr.com

Printed in Germany RG-BK-RP LFR/SP 11003238-1.5-04.13_enGB-US

Liebherr-Mining Equipment Colmar SAS

49 rue Frédéric Hartmann, FR-68025 Colmar Cedex
 +33 369 49 20 00, Fax +33 369 49 23 18
www.liebherr.com, E-Mail: info.lec@liebherr.com
www.facebook.com/LiebherrConstruction