Product Line Product

DRILLING, MILLING, AND CUTTING TOOLS THREADED CUP JUNK SUBS

Overview Assembly
The Logan Threaded Cup Junk Sub is Threaded cup junk subs are placed
an accessory tool that prevents directly above the mill or drill bit. For
cuttings from milling or drilling severe milling jobs, it is customary to
operations that are too heavy to be run two or three junk subs in tandem
circulated from settling at the above the mill to increase cutting
bottom of the hole. The removable removal capacity and provide extra
threaded cup design allows easy stabilization for the mill.
inspection of the body. Damaged
cups can easily be removed and Operation
replaced. Threaded cup junk subs can be run
in an open hole or inside casing. Body
Construction When running inside casing, hard-
The Logan Threaded Cup Junk Sub is faced pads dressed to the same
manufactured from high strength, outside diameter as the mill or bit
heat-treated alloy steel to withstand should be used.
wear.
When ordering, please specify:
The tool’s strength is further • Name and number of assembly
enhanced by cup support ribs that • Size and type of connections
are machined from the main body of • Cup length
the tool, not welded. These heavy-
duty ribs support the cup and guide
the tool through tight places and
prevent it from being crushed.

The standard assembly has a 20-

inch-deep cup. Standard (20-inch)
and long (30-inch) cup lengths are Cup
available.

O-Ring

THREADED CUP JUNK SUBS

For more information
Visit www.rubicon-oilfield.com or contact your local sales office
Domestic and international patents and trademarks granted and/or
applied for where applicable
 Product Line Product
DRILLING, MILLING, AND CUTTING TOOLS THREADED CUP JUNK SUBS

CASING SIZE RANGE (HOLE SIZE) 4-1/4 to 5-5/8 4-5/8 to 4-7/8 4-5/8 to 4-7/8 5-1/8 to 5-7/8 6 to 6-3/8 6-1/2 to 7-1/2
CONNECTION (STD. API REG) 2-3/8 2-3/8 2-7/8 2-7/8 3-1/2 3-1/2 3-1/2
DIAMETER OF BORE 3/4 3/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2
O.D. OF TOP CONNECTION BODY 2-15/16 3-1/8 3-1/2 3-1/2 4-1/4 4-1/4 4-1/4
O.D. UNDER TOP CONNECTION 2 2 2-5/8 2-5/8 3-1/8 3-1/4 3-1/4
O.D. OF CUP 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2
(determines part number)
I.D. OF CUP 3 3-5/16 3-9/16 3-3/4 4-1/4 4-9/16 4-7/8

STANDARD TYPE
CUP LENGTH (inches) 10 10 10 10 10 10 10
COMPLETE Logan Part No. 201-014-10 201-000-10 201-013-10 201-001-10 201-002-10 201-003-10 201-004-10
ASSEMBLY
Body Logan Part No. KA1014-10 KA1000-10 KA1013-10 KA1001-10 KA1002-10 KA1003-10 KA1004-10
O-Ring for Groove Logan Part No. * 568-234 * * * 568-244 568-247
O-Ring for Logan Part No. * 568-151 * * * 568-157 568-157
Threaded Groove
Threaded Cup Logan Part No. KA2014-10 KA2000-10 KA2013-10 KA2001-10 KA2002-10 KA2003-10 KA2004-10

LONG TYPE
CUP LENGTH (inches) 20 20 20 20 20 20 20
COMPLETE Logan Part No. 201-014-20 201-000-20 201-013-20 201-001-20 201-002-20 201-003-20 201-004-20
ASSEMBLY
Body Logan Part No. KA1014-20 KA1000-20 KA1013-20 KA1001-20 KA1002-20 KA1003-20 KA1004-20
O-Ring for Groove Logan Part No. * 568-234 568-237 * * 568-244 568-247
O-Ring for Logan Part No. * 568-151 568-238 * * 568-157 568-157
Threaded Groove
Threaded Cup Logan Part No. KA2014-20 KA2000-20 KA2013-20 KA2001-20 KA2002-20 KA2003-20 KA2004-20

EXTRA LONG TYPE

CUP LENGTH (inches) 30 30 30 30 30 30 30
COMPLETE Logan Part No. 201-2014-30 201-000-30 201-013-30 201-001-30 201-002-30 201-003-30 201-004-30
ASSEMBLY
Body Logan Part No. KA1014-30 KA1000-30 KA1013-30 KA1001-30 KA1002-30 KA1003-30 KA1004-30
O-Ring for Groove Logan Part No. * 568-234 568-237 * * 568-244 568-247
O-Ring for Logan Part No. * 568-151 568-238 * * 568-157 568-157
Threaded Groove
Threaded Cup Logan Part No. KA2014-30 KA2000-30 KA2013-30 KA2001-30 KA2002-30 KA2003-30 KA2004-30

Logan Oil Tools (a Rubicon Product Brand) reserves the right to change or discontinue designs without prior notice.

When ordering, please specify:

• Name and number of assembly

• Size and type of connections
• Cup length

* To be advised upon request.

THREADED CUP JUNK SUBS

For more information
Visit www.rubicon-oilfield.com or contact your local sales office
Domestic and international patents and trademarks granted and/or
applied for where applicable
 Product Line Product
DRILLING, MILLING, AND CUTTING TOOLS THREADED CUP JUNK SUBS

CASING SIZE RANGE (HOLE SIZE) 7-1/2 to 8-1/2 8-5/8 to 9-5/8 9-5/8 to 11-5/8 11-1/2 to 13
CONNECTION (STD. API REG) 4-1/2 4-1/2 4-1/2 6-5/8 6-5/8 6-5/8 6-5/8
DIAMETER OF BORE 2-1/4 2-1/4 2-1/4 3-1/2 3-1/2 3-1/2 3-1/2
O.D. OF TOP CONNECTION BODY 5-1/2 5-1/2 5-1/2 8 7-3/4 8 8
O.D. UNDER TOP CONNECTION 4-1/2 4-1/2 5-1/2 5-3/4 5-3/4 6 6
O.D. OF CUP 6-5/8 7 8-1/2 8-5/8 9 9-5/8 10
(determines part number)
I.D. OF CUP 5-15/16 6-9/32 7-9/16 7-15/16 8-1/8 8-17/32 8-29/32

STANDARD TYPE
CUP LENGTH (inches) 10 10 10 10 10 10 10
COMPLETE Logan Part No. 201-005-10 201-006-10 201-000-10 201-001-10 201-002-10 201-003-10 201-004-10
ASSEMBLY
Body Logan Part No. KA1005-10 KA1006-10 KA1000-10 KA1001-10 KA1002-10 KA1003-10 KA1004-10
O-Ring for Groove Logan Part No. 568-256 568-258 568-234 * * 568-244 568-247
O-Ring for Logan Part No. 568-163 568-258 568-151 * * 568-157 568-157
Threaded Groove
Threaded Cup Logan Part No. KA2005-10 KA2006-10 KA2000-10 KA2001-10 KA2002-10 KA2003-10 KA2004-10

LONG TYPE
CUP LENGTH (inches) 20 20 20 20 20 20 20
COMPLETE Logan Part No. 201-005-20 201-006-20 201-007-20 201-008-20 201-009-20 201-010-20 201-011-20
ASSEMBLY
Body Logan Part No. KA1005-20 KA1006-20 KA1007-20 KA1008-20 KA1009-20 KA1010-20 KA1011-20
O-Ring for Groove Logan Part No. 568-256 568-258 568-263 * 568-265 568-267 568-268
O-Ring for Logan Part No. 568-163 568-258 568-264 * 568-266 568-268 568-269
Threaded Groove
Threaded Cup Logan Part No. KA2005-20 KA2006-20 KA2007-20 KA2008-20 KA2009-20 KA2010-20 KA2011-20

EXTRA LONG TYPE

CUP LENGTH (inches) 30 30 30 30 30 30 30
COMPLETE Logan Part No. 201-005-30 201-006-30 201-007-30 201-008-30 201-009-30 201-010-30 201-011-30
ASSEMBLY
Body Logan Part No. KA1005-30 KA1006-30 KA1007-30 KA1008-30 KA1009-30 KA1010-30 KA1011-30
O-Ring for Groove Logan Part No. 568-256 568-258 568-263 * 568-265 568-267 568-268
O-Ring for Logan Part No. 568-163 568-258 568-264 * 568-266 568-268 568-269
Threaded Groove
Threaded Cup Logan Part No. KA2005-30 KA2006-30 KA2007-30 KA2008-30 KA2009-30 KA2010-30 KA2011-30

Logan Oil Tools (a Rubicon Product Brand) reserves the right to change or discontinue designs without prior notice.

When ordering, please specify:

• Name and number of assembly

• Size and type of connections
• Cup length

* To be advised upon request.

THREADED CUP JUNK SUBS
For more information
Visit www.rubicon-oilfield.com or contact your local sales office
Domestic and international patents and trademarks granted and/or
applied for where applicable
 Product Line Product
DRILLING, MILLING, AND CUTTING TOOLS THREADED CUP JUNK SUBS

CASING SIZE RANGE (HOLE SIZE) 14-3/4 to 17-1/2 14-3/4 to 17-1/2

CONNECTION (STD. API REG) 7-5/8 7-5/8
DIAMETER OF BORE 4 4
O.D. OF TOP CONNECTION BODY 8-7/8 8-7/8
O.D. UNDER TOP CONNECTION 7-5/8 7-5/8
O.D. OF CUP 12-3/4 12-7/8
(determines part number)
I.D. OF CUP 11-1/2 11-5/8

STANDARD TYPE
CUP LENGTH (inches) 10 10
COMPLETE Logan Part No. 201-005-10 201-006-10
ASSEMBLY
Body Logan Part No. KA1005-10 KA1006-10
O-Ring for Groove Logan Part No. 568-256 568-258
O-Ring for Logan Part No. 568-163 568-258
Threaded Groove
Threaded Cup Logan Part No. KA2005-10 KA2006-10

LONG TYPE
CUP LENGTH (inches) 20 20
COMPLETE Logan Part No. 201-039-20 201-012-20
ASSEMBLY
Body Logan Part No. KA10115-20 KA1012-20
O-Ring for Groove Logan Part No. 568-276 *
O-Ring for Logan Part No. 568-277 *
Threaded Groove
Threaded Cup Logan Part No. KA20115-20 KA2012-20

EXTRA LONG TYPE

CUP LENGTH (inches) 30 30
COMPLETE Logan Part No. 201-039-30 201-012-30
ASSEMBLY
Body Logan Part No. KA10115-30 KA1012-30
O-Ring for Groove Logan Part No. 568-276 *
O-Ring for Logan Part No. 568-277 *
Threaded Groove
Threaded Cup Logan Part No. KA20115-30 KA2012-30

Logan Oil Tools (a Rubicon Product Brand) reserves the right to change or discontinue designs without prior notice.

When ordering, please specify:

• Name and number of assembly

• Size and type of connections
• Cup length

* To be advised upon request.

THREADED CUP JUNK SUBS

For more information
Visit www.rubicon-oilfield.com or contact your local sales office
Domestic and international patents and trademarks granted and/or
applied for where applicable