Data sheet
ACT20P Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
ACT20P-CML-10-AO-RC-S D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
 

 
Product image

ACT20P: The flexible solution

• Precise and highly functional signal converters
• Simple configuration via display (Pro DCDC II), FDT/
DTM software or DIP switch
• Release levers simplify handling
• More space in the control cabinet, from 12.5 mm wide
for two channels

General ordering data

 
Type ACT20P-CML-10-AO-RC-S
Order No. 2044850000
Version Current-measuring transducer, Limit value
monitoring, Signal converter/isolator, Current
monitoring, Analogue output, Screw connection,
Input measurement range: configurable, 0…
1/5/10 A AC (RMS) or DC
GTIN (EAN) 4050118409680
Qty.
 
1 pc(s).

Creation date March 1, 2019 11:45:48 AM CET

 

  Catalogue status 15.02.2019 / We reserve the right to make technical changes. 1

  
Data sheet
ACT20P Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
ACT20P-CML-10-AO-RC-S D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083

 
Technical data www.weidmueller.com

Dimensions and weights

 
Width 17.5 mm   Width (inches) 0.689 inch
Height 119.2 mm   Height (inches) 4.693 inch
Depth 113.6 mm   Depth (inches) 4.472 inch
Net weight 141 g    
 

Temperatures
 
Humidity 5...95 %, no condensation   Operating temperature, max. 60 °C
Operating temperature, min. -25 °C   Storage temperature, max. 85 °C
Storage temperature, min. -40 °C   Operating temperature -25 °C...60 °C
Ambient temperature -25 °C...+70 °C   Storage temperature -40 °C...85 °C
 

Probability of failure
 
MTTF 130 Years    
 

Environmental Product Compliance

 
REACH SVHC Lead 7439-92-1    
 

Input
 
Number of inputs   Input signal Power cable can be
1 connected to the terminals
Input measurement range   Input frequency AC: 15…400 Hz (true root
configurable, 0…1/5/10 A mean square), AC: 50 Hz
 
AC (RMS) or DC (arithmetic average)

General data
 
Accuracy ≤ ±0.3 % @ 1 A ⁄ 5 A, ≤   Configuration DIP switch and
±0.6 % @ 10 A potentiometer
Galvanic isolation 4-way isolator;, between   Power consumption, max.
input ⁄ output ⁄ supply ⁄
relay 2.2 W
Rail   Step response time ≤ 300 ms (RMS), ≤ 60 ms
TS 35 (AA)
Temperature coefficient ≤ ±100 ppm⁄K @ -25…   Voltage supply
+55 °C, ≤ ±200 ppm/K @
 
+55…+70 °C 16,8 V…31,2 V

Insulation coordination
 
EMC standards   Galvanic isolation 4-way isolator;, between
IEC 61326-1, IEC input ⁄ output ⁄ supply ⁄
61010-2-201 relay
Impulse withstand voltage 6 kV (1.2/50 µs)   Insulation voltage 4 kVeff / 1 min.
Pollution severity 2   Rated voltage 300 V ACrms
Surge voltage category III   Test voltage 4 kV
 

Creation date March 1, 2019 11:45:48 AM CET

 

  Catalogue status 15.02.2019 / We reserve the right to make technical changes. 2

  
Data sheet
ACT20P Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
ACT20P-CML-10-AO-RC-S D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083

 
Technical data www.weidmueller.com

Output (analogue)
 
Load resistance current ≤ 600 Ω   Load resistance voltage ≥ 10 kΩ
Output current   Output voltage adjustable, 0...10 V, 2…10
adjustable, 0...20 mA, V, 0...5 V, 1...5 V, -5…+5 V,
4...20 mA, -20…+20 mA -10...+10 V
Type (analogue output) Voltage and current output    
 
(configurable)

Output (digital)
 
Alarm function Surge current, Under-   Number of digital outputs
current, Alarm delay: 0…10
s 1
Type Relay, 1 CO contact,   Max. switching voltage, DC
normal / inverse
adjustment 24 V
Max. switching voltage, AC 250 V   Rated switching current 2A
 

Connection data
 
Type of connection Screw connection   Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.6 Nm   Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.5 mm²   Clamping range, max. 2.5 mm²
Wire connection cross section AWG,   Wire connection cross section AWG,
min.
 
AWG 26 max. AWG 12

Classifications
 
ETIM 6.0 EC002475   eClass 6.2 27-21-09-02
eClass 9.0 27-21-01-23   eClass 9.1 27-21-01-23
 

Product information
 
Product information The device ACT20P-CML-10-AO-RC-S measures and monitors AC and DC currents of up to 10 A. The real
effective value method used allows for precise measurement, even for distorted current curve shapes. The
device features an integrated limit value monitoring function with an adjustable switching threshold, lag and
hysteresis, as well as a relay output.
Features
• Real effective value measurement (True RMS) or arithmetic averaging (AA) measurement
• Limit value monitoring for overcurrent or undercurrent
• Relay output by means of the open-circuit / closed-circuit principle
• Adjustable trigger delay for filtering current peaks
• Operational status and error display on a front panel LED and output signalling according to NE43, NE44,
NE107
 
• Galvanic four-way insulation for secure isolation according to IEC/EN 61010-2-201

Approvals
 
Approvals

ROHS
 
Conform

Creation date March 1, 2019 11:45:48 AM CET

 

  Catalogue status 15.02.2019 / We reserve the right to make technical changes. 3

  
Data sheet
ACT20P Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
ACT20P-CML-10-AO-RC-S D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083

 
Technical data www.weidmueller.com

Downloads
 
Approval/Certificate/Document of DNV GL certification
Conformity Declaration of Conformity
Engineering Data EPLAN
Engineering Data STEP
Software DIP switch configuration tool
User Documentation
 
Instruction sheet

Creation date March 1, 2019 11:45:48 AM CET

 

  Catalogue status 15.02.2019 / We reserve the right to make technical changes. 4

  
Data sheet
ACT20P Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
ACT20P-CML-10-AO-RC-S D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083

 
Drawings www.weidmueller.com

Dimensioned drawing Connection diagram

example for DIP switch setting (with ACT20 tool)

Creation date March 1, 2019 11:45:48 AM CET

 

  Catalogue status 15.02.2019 / We reserve the right to make technical changes. 5