Ucd Ac005 0013 L100 PRM
Ucd Ac005 0013 L100 PRM
Ucd Ac005 0013 L100 PRM
UCD-AC005-0013-L100-PRM
Interface
Interface Analog Current
Manual Functions Start and End point via Cable or Connector
Video Manual Watch a simple installation video
Data Sheet
Printed at 19-08-2019 14:08
-1/5-
Electrical Data
Supply Voltage 8 – 32 VDC
Current Consumption Typical 20 mA @24 V (no load)
Start-Up Time <500 ms
Max Load Resistance 500 Ω
Analog Accuracy @ 20 mA = ±20 µA (with an ideal power supply)
Linearity 0.15%
Settling Time 32 ms (from min value to max value jump)
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 278.3 years @ 40 °C
Sensor
Technology Magnetic
Resolution Singleturn 13 bit
Accuracy (INL) ±0.0878° (≤ 12 bit)
Sense Signal (Default) Counterclockwise shaft movement (front view on
shaft)
Code Analog Current 4 – 20 mA
Cycle Time Base Sensor < 100 µs
Minimum Measurement Range 0 – 22.5°
Resolution of Output Max. 13 bits over entire measureing range
(Fractional Turns - Resolution decreases less than
13 bits when measurements range is less than
90 degrees)
Multiturn Range Singleturn
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP66/IP67
Operating Temperature -40 °C (-40 °F) - +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data
Housing Material Steel
Data Sheet
Printed at 19-08-2019 14:08
-2/5-
Housing Coating Wet coating (RAL 9006 White Aluminium) +
Cathodic corrosion protection (>720 h salt spay
resistance)
Flange Type Clamp, ø 58 mm (L)
Flange Material Aluminum
Shaft Type Solid, Single Flat, Length = 20 mm
Shaft Diameter ø 10 mm (0.39")
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Minimum Mechanical Lifetime 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N /
(10^8 revolutions with Fa/Fr) 80 N), 55 (40 N / 110 N)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 52,7 mm (2.07")
Weight 325 g (0.72 lb)
Electrical Connection
Connection Orientation Radial
Connector M12, Male, 5 pin, a coded
Data Sheet
Printed at 19-08-2019 14:08
-3/5-
Connection Plan
SIGNAL CONNECTOR PIN NUMBER
Power Supply Connector 1 2
GND Connector 1 3
Analog Output Connector 1 1
Set1/Direction Connector 1 5
Set2/Zero Set Connector 1 4
Connector-View on Encoder
Dimensional Drawing
2D Drawing
Accessories
-4/5-
Coupling Bellow Type-10-(3/8")
Coupling Jaw Type-06-10
Coupling Jaw Type-08-10
Coupling Jaw Type-10-12
Coupling Jaw Type-10-(1/4")
Coupling Jaw Type-10-(3/8")
Coupling Jaw Type-10-10
Coupling Disc Type-06-10
Coupling Disc Type-10-10
More
Adapter Flanges
Mounting Bracket for Clamping Flange w/ fixtures
L Mounting Bracket w/ screws
Mounting Bracket Spring Loaded f. Clamping Flange
Clamping Rings
Clamp Disc w/ Eccentric Hole-4pcs
Clamp Disc w/ Centred Hole-4pcs
Displays
AP22-D0 Analog Display (4 dig. o/p)
DiMod-A Analog Display
Contact
Contact Us
The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions.
Specifications are subject to change without notice.
Data Sheet
Printed at 19-08-2019 14:08
-5/5-