Dial Gauge Digital

Small Tool Instruments and
Data Management
INDEX
Digimatic Indicator
ABSOLUTE Digimatic Indicator ID-S
ABSOLUTE Digimatic Indicator ID-U
ABSOLUTE Digimatic Indicator ID-C
ABSOLUTE Digimatic Indicator ID-H
ABSOLUTE Digimatic Indicator ID-F
ABSOLUTE Digimatic Indicator ID-N/B
EC Counter
Multi-Unit, Difference/Sum Unit
Dial Indicator
Dial Indicator
Special Dial Indicator
Dial Indicator (One Revolution Type)
Dial Indicator (Long Stroke Type)
Dial Indicator (Large Dial Face and Long Stroke Type)
ANSI/AGD Type Metric Dial Indicator
Hicator, Signal Hicator
Back Plunger Type Dial Indicator
Contact Point
Back
Spindle Lifting Lever and Cable
Color Spindle Cap
Limit Sticker
Dial Indicator Repair Tool Kit
Dial Indicator Crystal Setter
Dial Test Indicator
Dial Test Indicator
Pocket Type Dial Test Indicator
Contact Point, Stem and Clamp Holder
Dial Indicator Application
i-Checker
UDT-2 Dial Gage Tester
Calibration Tester
Thickness Gage
Light-Weight Dial Thickness Gage
Digimatic Caliper Gage
Dial Caliper Gage
Bench Gage
Upright Gage
Dial Snap Gage
Female Screw Thread Comparator
Roll Caliper
Dial Tension Gage
V-Block Set
Stand
Magnetic Stand
Dial Gage Stand
Transfer Stand
Granite Comparator Stand
Comparator Stand
Heavy Duty Comparator Stand
Digimatic
Indicator
Dial Indicator
Dial Test Indicator
Dial Indicator
Application and
Stand
New Products
ID-H
2046S
2109S-10
ID-N / ID-B
Caliper gage
231
232
233
234
240
241
242
243
243
244
253
254
256
258
260
261
262
264
266
267
268
268
269
269
270
276
278
280
281
281
282
284
285
286
288
289
290
291
291
292
292
293
294
295
296
297
298
ABSOLUTE Digimatic Indicator ID-S

SERIES 543 with Economical Design
FEATURES
After the initial zero-setting with the
ORIGIN button, the repeated absolute
positioning is no longer necessary over the
entire battery life.
Measurement error due to spindle overspeed is eliminated with the ABSOLUTE
Encoder.
SPC data output.
As compact as standard Series 2 dial

indicators.
The ID-S indicates the absolute position of
the spindle from the origin point at poweron, allowing to start measurements.
543-690
(Refer to the page 9 for details.)
Technical Data
Accuracy:
Refer to the list of specications

(excluding quantizing error)
Resolution: 0.01mm, 0.001mm, .0005"/0.01mm,
.0001/0.001mm or .00005/0.001mm
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Measuring force: Refer to the list of specications
Stem dia.: 8mm (ISO/JIS type) or 3/8 (ANSI/AGD type)
Contact point: Carbide ball with M2.5x0.45 (ISO/JIS type)
Carbide ball with #4-48UNF (ANSI/AGD type)
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 20,000 hours under normal use
Dust/Water protection level: IP42 (IP53: 543-694, 543-695,
543-696)
Function
Origin-set, Zeroset, Counting direction switching, Power

ON/OFF, Data output, inch/mm conversion (inch/mm models)
Alarm:
Low voltage, Counting value composition error,
Over-ow error
SPECIFICATIONS
Optional Accessory
Metric
ISO/JIS type
Resolution
0.001mm
0.001mm
0.01mm
ANSI/AGD type
Order No. (w/ lug, at-back)

543-690
543-690B
543-694
543-694B
543-681
543-681B
Range
12.7mm
12.7mm
12.7mm
Accuracy
0.003mm
0.003mm
0.02mm
Measuring force
2.0N or less
2.5N or less
2.0N or less
Remarks
Dust-proof

543-691
543-691B
543-695
543-695B
543-692
543-692B
543-696
543-696B
543-693
543-693B
543-682
543-682B
543-683
543-683B
Range
.5
.5
.5
.5
.5
.5
.5
Accuracy
.00012
.00012
.00012
.00012
.00012
.0008
.0008
Measuring force
2.0N or less
2.5N or less
2.0N or less
2.5N or less
2.0N or less
2.0N or less
2.0N or less
Remarks
Dust-proof
Dust-proof
Inch/Metric
Resolution
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.0001/0.001mm
.0005/0.01mm
.0005/0.01mm
DIMENSION
ISO/JIS
Type
Unit: mm
232
Note 1: Dimensions of the inch (ANSI/AGD

Type) dial indicator partly differ
from those of the metric (ISO/JIS
Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial
indicator is provided with a stem
of 3/8" dia. and #4-48UNF thread
mount for the contact point.
905338:
905409:
903424:
903425:
540774:
125317:
02ACB610:
02ACB630:
02ACB640:
02ACB650:
02ACB670:
02ACB680:
:
SPC cable (1m)

SPC cable (2m)
Spindle lifting lever (ISO/JIS type)
Spindle lifting lever (ANSI/AGD type)
Spindle lifting cable
Spare rubber boot (for dust-proof type)
Back with post
Adjustable back
Back with offset lug
Magnetic back
Back with screw mount
Back with adjustable bracket
Contact points (See page 264.)
ABSOLUTE Digimatic Indicator ID-U

SERIES 575 with Slime and Economical Design
FEATURES
Technical Data
Accuracy:

Resolution: 0.01mm or .0005"/0.01mm,
Display:
LCD
linear encoder
Battery:
SR44 (1 pc.), 938882
Dust/Water protection level: IP42
Slim type digital indicator with low price.

Large LCD and simple key operation.
The ID-U displays the absolute position of
the spindle from the origin point at poweron.
After the initial origin setting, the ID-U
no longer needs absolute positioning
over the entire battery life; the origin is
remembered even after power-off.
Ideal for installation into measuring devices
because of its compact design and long
battery life.
The ABSOLUTE Encoder eliminates spindle
over-speed error and prevents electrical
noise interference errors.
SPC data output.
575-121
Function
Origin-set, Zeroset, Counting direction switching, Power

Alarm:
Over-ow error
Optional Accessory
905338:
905409:
540774:
:
SPC cable (1m)

SPC cable (2m)
Spindle lifting cable (stroke: 10mm)
SPECIFICATIONS
Metric
Resolution
0.01mm
ISO/JIS type
ANSI/AGD type
Order No. (w/ lug, at-back) Range
575-121
25.4mm
Accuracy
0.02mm
Measuring force
1.8N or less
Remarks
575-122
1
575-123
1
Accuracy
.0008
.0008
Measuring force
1.8N or less
1.8N or less
Remarks
Inch/Metric
Resolution
.0005/0.01mm
.0005/0.01mm
DIMENSION
Unit: mm
ISO/JIS
Type
233
Application example
Note 1: Dimensions of the inch (ANSI/AGD Type)

dial indicator partly differ from those of
the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicator is
provided with a stem of 3/8" dia. and
#4-48UNF thread mount for the contact
point.

SERIES 543 Standard Type
FEATURES
As compact as standard Series 2 dial
indicators.
Large, easy-to-read LCD.
ZERO/ABS key: Allows the display to
be Zero-Set at any spindle position for
comparison measurements. This switch
will also allow return to the absolute
coordinate and display of the true position
from the origin point.
GO/NG judgment can be performed by
setting upper and lower tolerance limits.
The judgment result (GO/NG) can be
displayed in full-size characters.
Internal calculations using the simple

formula of [F(x) = Ax)] are available.
The positive/negative count resulting from
the spindles up/down movement can be
toggled.
Unlimited response speed eliminates
spindle over-speed errors.
The indicator face can be rotated 330 to
an appropriate angle for easy reading.
With SPC data output.
Technical Data
Accuracy:

Resolution:
0.01mm type
0.001mm type
.0005"/0.01mm type
.00005/0.001mm type
0.01mm
0.001mm/0.001mm
.0005"/0.01mm
.0005/.0001/.00005/
0.01mm/0.001mm
Display:
LCD
linear encoder
Battery:
SR44 (1 pc.), 938882
Function
Origin-set/Preset, Zeroset, GO/NG judgment, Counting

direction switching, Power ON/OFF, Simplied calculation,
Function lock, Data hold, Data output, inch/mm conversion
(inch/mm models)
Alarm:
Over-ow error, Tolerance limit setting error
Optional Accessory
905338:
905409:
21EZA198:
21EZA199:
SPC cable (1m)

SPC cable (2m)
Spindle lifting lever (12.7mm/.5 ISO/JIS type)
Spindle lifting lever (12.7mm/.5 ANSI/AGD
type)
21EZA105: Spindle lifting knob (12.7mm/.5 ISO/JIS type)*
21EZA150: Spindle lifting knob (12.7mm/.5 ANSI/AGD
type)*
21EZA197: Spindle lifting knob (25.4mm/1, 50.8mm/2
models)
540774:
02ACA571: Auxiliary spindle spring (25.4mm/1 models)**
02ACA773: Auxiliary spindle spring (50.8mm/2 models)**
:
Backs (See page 266.)
:
Lug-on-center back (25.4mm/1 and
50.8mm/2, ISO/JIS type)
:
Lug-on-center back (25.4mm/1 and
50.8mm/2, ANSI/AGD type)
:
543-390
543-470B
*Not available for low measuring force models.

**Required when orienting the indicator upside down.
543-490B
234
SPECIFICATIONS
Metric
ISO/JIS type
Resolution*
0.001mm
0.001mm
0.001mm
0.001mm
0.01mm
0.01mm
0.01mm
0.01mm
ANSI/AGD type

543-390
543-390B
543-394
543-394B
543-470B
543-490B
543-400
543-400B
543-404
543-404B
543-474B
543-494B
Range
12.7mm
12.7mm
25.4mm
50.8mm
12.7mm
12.7mm
25.4mm
50.8mm
Accuracy
0.003mm
0.003mm
0.003mm
0.005mm
0.02mm
0.02mm
0.02mm
0.04mm
Measuring force
1.5N or less
0.4N - 0.7N
1.8N or less
2.3N or less
0.9N or less
0.2N - 0.5N
1.8N or less
2.3N or less
Remarks
Low measuring force
Low measuring force

543-391
543-391B
543-392
543-392B
543-395
543-395B
543-396
543-396B
543-471B
543-472B
543-491B
543-492B
543-401
543-401B
543-402
543-402B
543-405
543-405B
543-406
543-406B
543-475B
543-476B
543-495B
543-496B
Range
.5
.5
.5
.5
1
1
2
2
.5
.5
.5
.5
1
1
2
2
Accuracy
.0001
.0001
.0001
.0001
.0001
.0001
.0002
.0002
.001
.001
.001
.001
.001
.001
.0015
.0015
Measuring force
1.5N or less
1.5N or less
0.4N - 0.7N
0.4N - 0.7N
1.8N or less
1.8N or less
2.3N or less
2.3N or less
0.9N or less
0.9N or less
0.2N - 0.5N
0.2N - 0.5N
1.8N or less
1.8N or less
2.3N or less
2.3N or less
Remarks
Low measuring force

Low measuring force
Low measuring force

Low measuring force
Inch/Metric
Resolution*
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.00005/0.001mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
DIMENSION
Unit: mm
ISO/JIS
Type
12.7mm range models
50.8mm range models
25.4mm range models
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly

differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicator is provided with a stem of
3/8" dia. and #4-48UNF thread mount for the contact point.
235

SERIES 543 Calculation Type
FEATURES
A conventional Digimatic indicator simply
displays a spindle displacement, but the
Calculation-Type Digimatic indicator
incorporates an internal calculation function
in place of spindle displacement. With
xtures, measurements such as feeler,
inside diameter and radius of curvature
measurement can easily be obtained
without the hassle of conversion tables or
equivalents.
Technical Data
Accuracy:

Resolution: 0.0002mm - 1mm or
.00001 - .05/0.0002mm - 1mm
Display:
LCD
linear encoder
Measuring force: 1.5N or less
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 12 months under normal use
The Absolute Digimatic indicator performs

internal calculations using the formula
Ax+B+Cx-1 (assuming spindle displacement
as x) while the specied coefcients A,
B and, C can be set with respect to the
purpose of measurement or dimensions
of the xtures. This unique features allows
you to read your measurements directly,
without fumbling for conversions.
Function

direction switching, Power ON/OFF, Data output, inch/mm
conversion (inch/mm models)
Alarm:
543-285B
Optional Accessory
SPECIFICATIONS
Metric
Resolution
0.0002 - 1mm
(switchable)
Inch/Metric
Order No.*
543-285B
543-480B
543-485B
Range
12.7mm
25.4mm
50.8mm
Accuracy
0.003mm
0.003mm
0.006mm
Resolution
.00001 - .05/
0.0002 - 1mm
(switchable)
*Flat back
ISO/JIS type
ANSI/AGD type
Order No.*
543-286B
543-287B
543-481B
543-482B
543-486B
543-487B
Range
.5
.5
1
1
2
2
Accuracy
.00012
.00012
.00012
.00012
.00025
.00025
905338:
905409:
902011:
540774:
:
:
SPC cable (1m)

SPC cable (2m)
APPLICATIONS
*Flat back
DIMENSION
Unit: mm
ISO/JIS
Type
236
Note 1: Dimensions of the inch

(ANSI/AGD Type) dial indicator
partly differ from those of the
metric (ISO/JIS Type) indicator.
indicator is provided with
a stem of 3/8" dia. and
#4-48UNF thread mount for
the contact point.
Various xtures suited for individual

workpieces can be prepared.
Measuring accuracy is subject to xture
accuracy

SERIES 543 with Green/Red LED and GO/NG Signal Output Function
FEATURES
Technical Data
Accuracy:

Resolution: 0.001mm, .00005/0.001mm or
.0001/0.001mm
Display:
LCD
linear encoder
Power supply: DC 12 - 24V10%
Function
Data output (NG/OK/NG signal, NPN open collector),

Remote control (hold-preset, preset-recall, zero-set),
Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min/
Runout value holding, Counting direction switching, Power
ON/OFF, inch/mm conversion (inch/mm models)
Alarm:
Optional Accessory
Spindle lifting lever* (ISO/JIS type)

Spindle lifting lever* (ANSI/AGD type)
Spindle lifting cable*
Rubber boot
*When using the spindle lifting lever/cable, IP54 is not guaranteed.
Output pattern
Wire
Orange ( NG)
Green (OK)
Brown (+ NG)
LED
LCD
NG
Low
High
High
Red
<
OK
High
Low
High
Green
O
+ NG
High
High
Low
Red
>
Composition error
High
High
High
Red (blinking)
x.xxE indication
543-280
SPECIFICATIONS
Metric
ISO/JIS type
Resolution
0.001mm
ANSI/AGD type

543-280
543-280B
12.7mm
Accuracy
0.003mm
Measuring force
2.0N or less
Remarks

543-281
543-281B
543-282
543-282B
543-283
543-283B
Accuracy
.00012
.00012
.00012
Measuring force
2.0N or less
2.0N or less
2.0N or less
Remarks
Inch/Metric
Resolution
.00005/0.001mm
.00005/0.001mm
.0005/0.01mm
Range
.5
.5
.5
DIMENSION
I/O Specications
External input terminal: If the relevant

terminal is set to the low level, its
signal becomes true.
Connected to GND
Note 1: Dimensions of the inch (ANSI/

AGD Type) dial indicator partly
differ from those of the metric
(ISO/JIS Type) indicator.
indicator is provided with
a stem of 3/8" dia. and
#4-48UNF thread mount for
the contact point.
237
FG
Unit: mm
ISO/JIS
Type
HOLD_RESET
Shield
Description
Connected to minus (-) terminal
Power supply (12 - 24VDC)
Tolerance judgment result output:
Only the terminal corresponding to
a judgment result is set to the below
level.
Blue
I/O
I
O
O
O
Yellow
Signal
V (GND)
+ V (GND)
NG
OK
+ NG
PRESET_RECALL
ZERO
Wire
Black
Red
Orange
Green
Brown
902011:
902794:
540774:
125317:
:
:
The Signal ID-C achieves the IP54

protection level to resist dust and
contaminants for safe operation in harsh
machine shop environments.
With the max./min. value holding function,

the signal ID-C can output the signal of the
GO/NG judgment result against the peak
values set. Substitute for the mechanical/
electrical contact, the judgment is carried
out by calculating the measurement data
obtained. This provides high reliability with
no deterioration of the contact point and
volume adjustment.
The signal can be output to an external
device like a sequencer through the NPN
open-collector.
The GO/NG judgment result is also
indicated by the green/red LED and the "<,
O, >" signs on LCD.
Employing the ABSOLUTE linear encoder,
the Signal ID-C always displays the spindle
"Absolute Position" from the origin at
power-on. Also unlimited response speed
eliminates over-speed errors.

SERIES 543 with Max./Min. Value Holding Function
With max./min. value holding function
model of the ID-C Series Digimatic
Indicators.
FEATURES
The maximum, minimum, or runout value
can be displayed during measurement.
GO/NG judgment is performed by setting
the upper and lower tolerances for max.,
min. and runout values.
High speed sampling ratio of 50 times/s.
Technical Data
Accuracy:

Resolution: 0.001mm, .00005/0.001mm or
.0001/0.001mm
Display:
LCD
linear encoder
Battery:
SR44 (2 pcs.), 938882
Battery life: Approx. 800 - 1300 hours under normal use
543-262
Function
Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min/

Runout value holding, Counting direction switching, Power
Alarm:
Optional Accessory
SPECIFICATIONS
Metric
Resolution
0.001mm
Inch/Metric
Order No.* Range
543-260
12.7mm
Accuracy
0.003mm
Resolution
.00005/0.001mm
.00005/0.001mm
.0001/0.001mm
*Back with lug

ISO/JIS type
ANSI/AGD type
Order No.*
543-261
543-262
543-263
Range
.5
.5
.5
Accuracy
.00012
.00012
.00012
*Back with lug
DIMENSION
Unit: mm
ISO/JIS
Type
238

Type) dial indicator partly differ from
those of the metric (ISO/JIS Type)
indicator.
Note 2: Inch (ANSI/AGD Type) dial indicator
is provided with a stem of 3/8" dia.
and #4-48UNF thread mount for the
contact point.
905338:
905409:
902011:
902794:
540774:
:
:
SPC cable (1m)

SPC cable (2m)
Spindle lifting lever (ANSI/AGD type)

SERIES 543 Specially Designed for Bore Gage Application
This ID-C Series Digimatic Indicators are
exclusively designed for ID measurement.
FEATURES
Technical Data
Accuracy:

Resolution: 0.001mm or .00005/0.001mm
Display:
LCD
linear encoder
Battery:
SR44 (2 pcs.), 938882
Battery life: Approx. 2000 hours under normal use
The minimum value holding function

provides the easy of detection of hole
diameter.
An analog bar indicator is integrated to
enhance the intuition in reading.
GO/NG judgment is performed by setting
the upper and lower tolerances.
Up to three sets of master value and upper/
lower tolerance value can be memorized.
Function
543-264B

Alarm:
Optional Accessory
SPC cable (1m)

SPC cable (2m)
Bore gage probe (0.95 - 1.55mm)
Bore gage probe (10 - 18mm)
SPECIFICATIONS
Metric
Resolution
0.001mm
Inch/Metric
Order No.* Range
543-264B
12.7mm
Accuracy
0.003mm
Resolution
.00005/0.001mm
*Back with lug
Order No.* Range

543-266B
.5
Accuracy
.00012
*Back with lug

ISO/JIS type
ANSI/AGD type
DIMENSION
Unit: mm
ISO/JIS
Type
239
Installed on bore gage

probe (511-127)

Type) dial indicator partly differ
from those of the metric (ISO/JIS
Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicator
is provided with a stem of 3/8" dia.
and #4-48UNF thread mount for
the contact point.
905338:
905409:
526-170:
526-160:
526-150:
526-101:
526-102:
526-126:
526-127:
526-132:
ABSOLUTE Digimatic Indicator ID-H

SERIES 543 High Accuracy and High Functional Type
FEATURES
This new-generation digital indicator offers
the excellent accuracy and functionality
expected from this class of indicator. Take
advantage of its high accuracy backed up
by 0.5m / .00002" resolution, remote
control functionality via a handheld
controller (or an RS-232C interface) and
easy runout measurements with the wellestablished analog bar display.
GO/NG judgment is performed
by setting the upper and lower
tolerances. If a judgment
result is out of tolerance,
the display backlighting
changes from green to red,
so tolerance judgment can be
made at a glance.
With RS-232C input/output
Technical Data
Accuracy:

Resolution: 0.0005mm/0.001mm or .00002/.00005
/.0001/0.0005mm/0.001mm
Display:
LCD
Length standard: Linear encoder
Max. response speed: 1000mm/s
Measuring force: 2.0N/2.5N* or less (*60mm range models)
Power supply: 6V DC (via AC adaptor)
543-561
543-563
Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min value

hold, Runout measurement, Resolution switching, Counting
Alarm:
Remote controller
(optional)
SPECIFICATIONS
Optional Accessory
Metric
Resolution
0.0005mm,
0.001mm
Inch/Metric
Order No.* Range
543-561
30.4mm
543-563
60.9mm
Function
Accuracy
0.0015mm
0.0025mm
* To denote your AC line voltage add the following sufxes to the order No.
A for 120V K for 100V D for 220V E for 240/220V DC for China
No sufx is required for 100V
Order No.* Range

543-562
1.2
543-564
2.4
Resolution
.00005, .0001,
0.0005mm,
0.001mm
Accuracy
0.0015mm
0.0025mm
DIMENSION
Tolerance judgment
Unit: mm
ISO/JIS
Type
SPC cable (1m)

SPC cable (2m)
RS-232C cable (2m)
Remote controller
Spindle lifting knob
Digimatic Min-processor DP-1VR
Digimatic presetter
Granite comparator stand
Comparator stand
Comparator stand
*Required when orienting the indicator upside down.
Application
Difference/Runout measurement
Example: Indicator travel from points A to D
Difference (or Total Runout) is displayed as A. Dimensions
B (maximum value) and C (minimum value) can be recalled
from memory with a simple key sequence.
Analog bar display
936937:
965014:
21EAA131:
21EZA099:
540774:
21EZA101:
264-504:
543-004:
215-154:
215-504:
215-821:
:
:
Resolution switching
Runout
measurement
( ): 543-561
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly
differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicator is provided with a stem of
3/8" dia. and #4-48UNF thread mount for the contact point.
240
Max/Min value
measurement
ABSOLUTE Digimatic Indicator ID-F

SERIES 543 with Back-lit LCD Screen
FEATURES
Technical Data
Accuracy:

Resolution: 0.01mm/0.001mm or .00005/.0001/.0005
/.001/0.001mm/0.01mm
Display:
LCD
linear encoder
Measuring force: 1.8N/2.3N* or less (*50mm range models)
Power supply: 9V DC (via AC adaptor)
Function
With the ABSOLUTE Linear Encoder

technology, once the measurement
reference point has been preset it will not
be lost when the power is turned on.
GO/NG judgment is performed by
setting the upper and lower tolerances. If
a judgment result is out of tolerance, the
display backlighting changes from green to
red, so tolerance judgment can be made at
a glance.
An analog bar indicator has been

integrated to handle upper/lower limit
approaching and zero approaching. It
enhances the ease of operation in the
same manner as a dial indicator. The
display range of the analog bar can be
changed.

Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min value

hold, Runout measurement, Resolution switching, Counting
Alarm:
Optional Accessory
936937:
SPC cable (1m)
965014:
SPC cable (2m)
21EAA131: RS-232C cable (2m)
540774:
02ACA571: Auxiliary spindle spring for 25mm/1 models*
02ACA773: Auxiliary spindle spring for 50mm/2 models*
264-504: Digimatic Min-processor DP-1VR
543-004: Digimatic presetter
215-154: Granite comparator stand
215-504: Comparator stand
215-821: Comparator stand
:
:
*Required when orienting the indicator upside down.
Application
Difference/Runout measurement
Example: Indicator travel from points A to D
Difference (or Total Runout) is displayed as A. Dimensions
B (maximum value) and C (minimum value) can be recalled
from memory with a simple key sequence.
543-552
543-554
SPECIFICATIONS
Metric
Inch/Metric
Resolution
Order No.*
0.001mm, 0.01mm 543-551
543-557
543-553
Range
25mm
50mm
50mm
Accuracy
0.003mm
0.003mm
0.006mm
Resolution
.00002, .00005,
.0001, .0005,
.001, 0.001mm,
0.01mm
Order No.*
543-552
543-558
543-554
Range
1
2
2
Accuracy
.00012
.00012
.00024
DIMENSION
ISO/JIS
Type
Unit: mm
241
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of
Note 2: Inch (ANSI/AGD Type) dial indicator is provided with a stem of 3/8" dia. and
#4-48UNF thread mount for the contact point.
( ):
for 30.4mm models
ABSOLUTE Digimatic Indicator ID-N / B
SERIES 543 with Dust/Water Protection Conforming to IP66

FEATURES
Proven ABSOLUTE sensor.
Rated to IP66 water- and dust-proong
standard and oil resistance improved.
Slim body design is advantageous for
multi-point measurements.
Improvement in workability with the LCD
readout-rotation function.
Back plunger design (ID-B).
Built-in tolerance judgment function.
Switchable resolution.
Waterproof data output connector.
Built-in hold/preset function
Slim type ID-N

543-575
Back plunger type ID-B

543-585
SPECIFICATIONS
Metric
Accuracy:
Resolution
0.01mm
0.01mm
0.01mm / 0.001mm
0.01mm / 0.001mm
Order No.
543-570
543-580
543-575
543-585
Range
12.7mm
5.0mm
12.7mm
5.0mm
Accuracy
0.02mm
0.02mm
0.01mm / 0.003mm
0.01mm / 0.003mm
Remarks
Slim type ID-N
Slim type ID-N
Order No.
543-571
543-581
543-576
543-586
Range
.5
.2
.5
.2
Accuracy
.0008
.0008
.0004 / .00012
.0004 / .00012
Remarks
Slim type ID-N
Slim type ID-N

Resolution: 0.01mm, 0.01mm/0.001mm, .0005/0.01mm
or .0005/.00005/0.01mm/0.001mm
Display:
LCD
linear encoder
Measuring force: 2.5N (2.0N: Back plunger type)
Stem dia.: 8mm (3/8: inch/metric models)
Contact point: Carbide ball with M2.5x0.45 (#4-48UNF:
inch/metric models)
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 7000 hours under normal use
Inch/Metric
Resolution
.0005, 0.01mm
0.01mm / 0.001mm
.0005 / .00005
Function
DIMENSION
Unit: mm
242
Zero-setting, Presetting, Direction switching, Tolerance

judgment, Display hold, Data output, inch/mm conversion
(inch/mm models)
Alarm:
Optional Accessory
Technical Data
21EZA105: Lifting knob (for ISO/JIS model)

21EZA150: Lifting knob (for AGD model)
21EZA145: Lug (for JIS/ISO model)
21EZA146: Lug (for AGD model)
02ACA376: Rubber boot (for ID-N, NBR)
238774:
Rubber boot (for ID-N, silicon)
125317:
Rubber boot (for ID-B, NBR)
21EAA212: Rubber boot (for ID-B, silicon)
21EAA194: Connecting cable (1m)
21EAA190: Connecting cable (2m)
21EAA210: Bifurcated connecting cable with
zero-setting terminal (1m)
21EAA211: Bifurcated connecting cable with
zero-setting terminal (2m)
:
EC Counter
SERIES 543 Low-cost, Assembly, Type Display Unit

FEATURES
Employed the DIN size (96 X 48mm) and
mount-on-panel conguration, which
greatly facilitates the incorporation into a
system.
Possible to produce either tolerance
judgment output or Digimatic output.
EC Counter
Order No.: 542-007
Function:
Preset, GO/NG judgment
DIMENSION
Unit: mm
243
Dial Indicator
FEATURES: S Series
Description of Icon
Revolutionary stem-bush design for trouble

free stem clamping (longer clamping
range).
No through screw-hole
on the frame for high
dust-resistance.
Limit hand
Icon
Description
Reverse reading type
suitable for depth and step
measurement.
One revolution type for easy
and error-free reading
Double scale spacing type,

easy-on-the-eyes
Shockproof type
Waterproof type
Bezel clamp
Involute curved lifting lever for smooth

movement of spindle and dovetail joint for
tool-less connection.
Grater rigidity in the bearing plate for
reducing the retracing error (20%) and
4-screw mounting for increasing impact
resistance.
With damper at lowest rest

point
Jeweled bearing type
Stem
Spindle
Peak retaining type
Contact point
Long stem type
Dustproof type
With coaxial revolution

counter
Back plunger type
Adjustable hand type
Double-face type
244
Dial Indicator
SERIES 1 Compact One Revolution Type for Error-free Reading
Unlike many other dial indicators, the onerevolution dial indicator literally shows the
entire spindle travel or range as one sweep
of the hand, eliminating the possibility of
reading errors due to miscounting the multiple revolutions. With one-revolution dial
indicators, "within tolerance" and "out-oftolerance" can never misinterpreted
An unique shock-proof mechanism is
incorporated, providing improved immunity
to shock due to sudden spindle retraction
caused by high impact.
One revolution type
1929S
1929S-60
1929S-62
1929S
SPECIFICATIONS
Metric
11m
11m
11m
6m
6m
6m
Range
(range/rev)
Dial
Measuring
Accuracy
reading force
50-0-50
50-0-50
50-0-50
50-0-50
50-0-50
50-0-50
1.4N or less
1.4N or less
1.4N or less
1.5N or less
1.5N or less
1.5N or less
Inch
ANSI/AGD type
Order No.
Graduation
w/ lug
Flat-back
.0005
1909S-62 1909SB-62
.0001
1910S-72 1910SB-72
.04 / .055 .0005 20-0-20 1.4N or less

.006 / .0079 .0001 3-0-3 1.4N or less
DIMENSION
ISO/JIS
Type
Unit: mm

point.

1mm / 1.4mm
1mm / 1.4mm
1mm / 1.4mm
0.1mm / 0.14mm
0.1mm / 0.14mm
0.1mm / 0.14mm
:
:
Dial
Measuring
Accuracy
reading force
Optional Accessory
Flat-back
1929SB
1929SB-60
1929SB-62
1900SB-10
1900SB-70
1900SB-72
Range
(range/rev)
1900S-10
1900S-70
1900S-72
ISO/JIS type
Order No.
Graduation
w/ lug
0.01mm
1929S
0.01mm
1929S-60
0.01mm
1929S-62
0.001mm 1900S-10
0.001mm 1900S-70
0.001mm 1900S-72
245
Order No.
1929S
1929S-60
1929S-62
1900S-10
1900S-70
1900S-72
A
47.5
55.5
47.5
53.5
54.5
53.5
B
13.8
12.2
13.8
16.8
12.2
16.8
C
13.7
23.3
13.7
16.7
22.3
16.7
Dial Indicator
SERIES 1 Compact Type
Mitutoyos Series 1 dial indicators off the

accuracy and durability for shop applications
demanding highly accurate measurements
where space is limited. The spindle is made
of hardened stainless steel for durability,
while the rack gear is machine ground for a
tighter t and increased accuracy.
1911
1911
1913-10
1040S
1003
1003
Optional Accessory
:
:
1044S
1109S-10
246

SPECIFICATIONS
Metric
Graduation
0.01mm
0.002mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.005mm
0.001mm
0.002mm
1040S
ISO/JIS type
Order No.
w/ lug
1911
1913-10
1003
1044S
1045S
1044S-10
1044S-60
1040S
1041S
1124S
1109S-10
1013S-10
Flat-back
1911B
1913B-10
1003B
1044SB
1045SB
1044SB-10
1044SB-60
1040SB
1041SB
1124SB
1109SB-10
1013SB-10
Range
(range/rev)
Accuracy
Dial
Measuring
reading force
2.5mm (1mm)
0.5mm (0.2mm)
4mm (1mm)
5mm (1mm)
5mm (1mm)
5mm (1mm)
5mm (1mm)
3.5mm (0.5mm)
3.5mm (0.5mm)
3.5mm (0.5mm)
1mm (0.2mm)
1mm (0.2mm)
12m
8m
13m
13m
13m
13m
13m
13m
13m
13m
7m
10m
0-50-0
0-100-0
0-50-0
0-100
0-50-0
0-100
0-100
0-50
0-25-0
0-50
0-100-0
0-100-0
1.8N or less
1.5N or less
1.4N or less
1.4N or less
1.4N or less
0.4N or less*
2.0N or less
1.4N or less
1.4N or less
1.4N or less
1.5N or less
1.5N or less
*Use in a vertical position only (contact point downward).
1041S
1044S
1044S-10
1044S-60
1045S
Inch
ANSI/AGD type
Order No.
Graduation
w/ lug
.001
1921
.0005
1923
.0001
1927-10
.0001
1925-10
.001
1410S
.001
1411S
.001
1410S-10
.001
1780S
.001
1781S
.0005
1506S
.0005
1507S
.0005
1670S
.0005
1671S
.0005
1570S
.0005
1571S
.00025
1470S
.00025
1471S
.0001
1802S-10
.0001
1803S-10
Flat-back
1921B
1923B
1927B-10
1925B-10
1410SB
1411SB
1410SB-10
1780SB
1781SB
1506SB
1507SB
1670SB
1671SB
1570SB
1571SB
1470SB
1471SB
1802SB-10
1803SB-10
Range
(range/rev)
Dial
Measuring
Accuracy
reading force
.1 (.04)
.05 (.02)
.01 (.004)
.025 (.01)
.25 (.1)
.25 (.1)
.25 (.1)
.125 (.05)
.125 (.05)
.125 (.05)
.125 (.05)
.1 (.04)
.1 (.04)
.075 (.03)
.075 (.03)
.05 (.02)
.05 (.02)
.025 (.01)
.025 (.01)
.001
.0005
.0002
.0002
.001
.001
.001
.001
.001
.0005
.0005
.0005
.0005
.0005
.0005
.00025
.00025
.0001
.0001
0-20-0
0-10-0
0-2-0
0-5-0
0-100
0-50-0
0-100
0-50
0-25-0
0-50
0-25-0
0-40
0-20-0
0-30
0-15-0
0-20
0-10-0
0-10
0-5-0
1.8N or less
1.8N or less
1.8N or less
1.8N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
DIMENSION
ISO/JIS
Type
1013S-10

point.
1109S-10
247
1124S
Unit: mm
Order No.
1040S
1041S
1044S
1044S-60
1045S
1124S
1013S-10
1109S-10
A
46
46
47.5
57
47.5
46
49
49
B
13
13
13.8
12.2
13.8
13.8
13.8
13.8
C
12.2
12.2
13.7
24.8
13.7
12.2
15.2
15.2
Dial Indicator
SERIES 2 Standard Type, 0.01mm Resolution

Series 2 dial indicators are Mitutoyos most
popular, and have the widest application.
FEATURES
Standard 0.01mm graduation dial gauges

having an outer frame with an outside
diameter of 57mm. All types come with
limit pins and an outer frame clamp as
standard.
The outer clamp and lifting lever (optional)
can be attached to either the right or left
side. These parts can be easily installed and
removed without tools.
Secured adhesion between the outer frame
and crystal as well as the use of an O-ring
ensure countermeasures against water and
oil permeation via the front face.
The stem spindle is made of high-strength

quench-hardened stainless steel which
resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is
resistant to wear and deformation.
Application of a hard coating on the
surface of the crystal makes the gauge
highly scratch- and chemical-resistant.
2046S
2046SH
2046S-09
2046S-15
2046S-80
2046SLB
2046SY
2046S
2046S-60
2046S-69
2046S-60
2047S
248
SPECIFICATIONS
Metric
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
2902S
ISO/JIS type
Order No.
w/ lug
2044S
2044S-09
2044S-60
2045S
2046S
2046SY
2046SH
2046S-09
2046S-60
2046S-69
2046S-15
2310S-10
2902S
2047S
Flat-back
2044SB
2044SB-09
2044SB-60
2045SB
2046SB
2046SYB
2046SHB
2046SLB
2046SB-09
2046SB-60
2046SB-69
2046SB-15
2310SB-10
2902SB
2047SB
Range
(range/rev)
Accuracy
Dial
reading
Measuring
force
5mm (1mm)
5mm (1mm)
5mm (1mm)
5mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
10mm (1mm)
12m
13m
12m
12m
13m
13m
8m
13m
15m
13m
15m
13m
15m
13m
13m
0-100
0-100
0-100
0-50-0
0-100
0-100
0-100
0-100
0-100
0-100
0-100
0-100
0-100
100-0
0-50-0
1.4N or less
1.4N or less
2.5N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
1.4N or less
2.5N or less
2.5N or less
0.8N or less*
1.4N or less
1.4N or less
1.4N or less
*Use in a vertical position only (contact point downward).
DIMENSION
ISO/JIS
Type
Unit: mm
2310S-10
2044S
2044S-60
2044S-09
2045S
Optional Accessory
:
:


point.
Order No.
2044S
2044S-09
2044S-60
2045S
2046S
2046SH
2046SLB
2046S-09
2046S-60
2046S-69
2046S-15
2310S-10
2902S
2047S
249
A
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
B
65.2
65.2
70
65.2
65.2
65.2
85.2
65.2
70
70
65.2
65.2
65..2
65.2
C
16.9
16.9
12.3
16.9
16.9
16.9
36.9
16.9
12.3
12.3
16.9
16.9
16.9
16.9
D
19.8
19.8
29.2
19.8
19.8
19.8
19.8
19.8
29.2
29.2
19.8
19.8
19.8
19.8
Dial Indicator
SERIES 2 Standard Type, 0.001mm Resolution

FEATURES
Standard 0.01mm graduation dial gauges
having an outer frame with an outside
diameter of 57mm. All types come with
limit pins and an outer frame clamp.
The outer clamp and lifting lever (optional)
can be attached to either the right or left
side. These parts can be easily installed and
removed without tools.
Secured adhesion between the outer frame
and crystal as well as the use of an O-ring
ensure countermeasures against water and
oil permeation via the front face.
The stem spindle is made of high-strength

quench-hardened stainless steel which
resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is
resistant to wear and deformation.
Application of a hard coating on the
surface of the crystal makes the gauge
highly scratch- and chemical-resistant.
A special alloy is used for the sector gears
to provide improved wear resistance.
The bearing part uses jeweled bearings,
providing excellent indication sensitivity
and durability.
2109S-10
2109SH-10
2109S-70
2109SLB-10
2110S-10
2110S-70
2109S-10
2110S-10
2113S-10
2119S-10
250
SPECIFICATIONS
Metric
Graduation
0.005mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
ISO/JIS type
Order No.
w/ lug
2124S-10
2110S-10
2110S-70
2109S-10
2109SH-10
2109S-70
2113S-10
2118S-10
2119S-10
Flat-back
2124SB-10
2110SB-10
2110SB-70
2109SB-10
2109SHB-10
2109SLB-10
2109SB-70
2113SB-10
2118SB-10
2119SB-10
Range
(range/rev)
Accuracy
Dial
reading
Measuring
force
5mm (0.5mm)
1mm (0.1mm)
1mm (0.1mm)
1mm (0.2mm)
1mm (0.2mm)
1mm (0.2mm)
1mm (0.2mm)
2mm (0.2mm)
5mm (0.2mm)
5mm (0.2mm)
12m
5m
5m
5m
3m
5m
5m
7m
10m
10m
0-50
0-100
0-100
0-100-0
0-100-0
0-100-0
0-100-0
0-100-0
0-100-100
0-100-0
1.5N or less
1.5N or less
2.0N or less
1.5N or less
1.5N or less
1.5N or less
2.0N or less
1.5N or less
1.5N or less
1.5N or less
2118S-10
DIMENSION
ISO/JIS
Type
Unit: mm
2119S-10
2124S-10
Optional Accessory
:
:


point.
Order No.
2124S-10
2110S-10
2110S-70
2109S-10
2109SH-10
2109SLB-10
2109S-70
2113S-10
2118S-10
2119S-10
251
A
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
48.8
B
60.3
66.5
67.5
60.5
60.5
80.5
65.3
61
60.3
60.3
C
16.9
16.9
12.3
16.9
16.9
36.9
12.3
16.9
16.9
16.9
D
14.9
21.1
26.7
15.1
15.1
15.1
24.5
15.6
14.9
14.9

Dial Gauge Digital

Uploaded by

Copyright:

Available Formats

Dial Gauge Digital

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dial Gauge Digital

Uploaded by

Copyright:

Available Formats

Small Tool Instruments and

Dial Test Indicator

ABSOLUTE Digimatic Indicator ID-S

As compact as standard Series 2 dial

(Refer to the page 9 for details.)

Refer to the list of specications

Origin-set, Zeroset, Counting direction switching, Power

Order No. (w/ lug, at-back)

Order No. (w/ lug, at-back)

Note 1: Dimensions of the inch (ANSI/AGD

SPC cable (1m)

ABSOLUTE Digimatic Indicator ID-U

(Refer to the page 9 for details.)

Refer to the list of specications

Slim type digital indicator with low price.

Origin-set, Zeroset, Counting direction switching, Power

SPC cable (1m)

Order No. (w/ lug, at-back) Range

Order No. (w/ lug, at-back) Range

Note 1: Dimensions of the inch (ANSI/AGD Type)

ABSOLUTE Digimatic Indicator ID-C

Internal calculations using the simple

(Refer to the page 9 for details.)

Refer to the list of specications

Origin-set/Preset, Zeroset, GO/NG judgment, Counting

SPC cable (1m)

*Not available for low measuring force models.

Order No. (w/ lug, at-back)

Low measuring force

Low measuring force

Order No. (w/ lug, at-back)

Low measuring force

Low measuring force

12.7mm range models

50.8mm range models

25.4mm range models

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly

ABSOLUTE Digimatic Indicator ID-C

(Refer to the page 9 for details.)

Refer to the list of specications

The Absolute Digimatic indicator performs

Origin-set/Preset, Zeroset, GO/NG judgment, Counting

SPC cable (1m)

Note 1: Dimensions of the inch

Various xtures suited for individual

ABSOLUTE Digimatic Indicator ID-C

(Refer to the page 9 for details.)

Refer to the list of specications

Data output (NG/OK/NG signal, NPN open collector),

Spindle lifting lever* (ISO/JIS type)

*When using the spindle lifting lever/cable, IP54 is not guaranteed.

Order No. (w/ lug, at-back) Range

Order No. (w/ lug, at-back)

External input terminal: If the relevant

Note 1: Dimensions of the inch (ANSI/

The Signal ID-C achieves the IP54

With the max./min. value holding function,

ABSOLUTE Digimatic Indicator ID-C

(Refer to the page 9 for details.)