Miscellaneous Miscellaneous: Mitutoyo

Precision Measuring Equipment and Industrial Supplies since 1924.
www.jwdonchin.com
4841 W. Chicago Ave. Chicago, IL 60651 Ph: 773.261.2182 Fax: 773.261.2867 jwdonchin@ameritech.net
MITUTOYO - MISCELLANEOUS
MISCELLANEOUS
Clear Loupe - Series 183
S-2
Pocket Comparators/Magnifiers w/Reticles
Series 183
S-2
Digital Protractor - Series 950
S-3
Precision Levels - Series 960, Levels Spirit Levels - Series 980
S-4
Digimatic Universal Protractor
S-5
Universal Bevel Protractor - Series 187,
Protractor - Series 187
S-6
Measuring Tapes - Series 980, Frame
Winder - Series 980
S-7
Digital Tape Measure - Series 216
S-8
Radius Gages - Series 186, Protractor Series 968
S-9
Radius Gages - Series 186 - Decimal
and Fractional
S-10
Angle Gages - Series 186
S-11
Depth Gage, Adjustable Angle Series 950
S-12
Pitch Gages - Series 188, 950
S-12
Thickness Gages - Series 184, 950,
Center Gage - Series 950
S-13
Standard Gages - Series 950, Tap &
Drill Gage - Series 950
S-14
Drill Point Gage, Thread Gage
S-14
Knife Edge Straight Edge - Series 528,
Steel Squares - Series 916
S-15
Combination Square Sets - Series 180
S-16
Steel Rules - Series 182
S-17, 18
Semi-Flexible Rules - Series 182, Hook
Rules - Series 182
S-19
Pocket Steel Rule - Series 950
S-19
Demagnetizers - Series 986, Precision
Sine Vises - Series 986
S-20
Precision Vises - Series 986, Precision
Hydraulic Vise
S-21
MISCELLANEOUS - Cont'd
Precision Sine Plates, Precision Magnetic
Sine Plates - Series 986
Precision Two and Three Dimensional
Vises - Series 986
Magnetic V-Block, Magnetic Adjustable
Links - Series 986
V-Blocks and Clamps - Series 181
Magnetic Hexagonal Holder - Series 986
Magnetic Cubic Blocks - Series 986,
Magnetic Holder - Series 986
Permanent Magnetic Chucks Series 986
Spring Div., Outside Spring Calipers,
Inside Spring Calipers - Series 950
Small Hole Gages - Series 154
Telescoping Gages - Series 155
Tap Wrench (T-Handle), Parallel Clamps
Scribers, Center Punches, Drive Pin
Punches - Series 985
Edge & Center Finders, Surface Gage Series 156
Magnetic Lamps - Series 986, Zero-It,
Zero-Setter - Series 950
Angle Blocks - Series 981, Adjustable
Parallels - Series 985
MU-Gage Plus, MU-Gage - Series 179
Roll Calipers - Series 310, Digi-Derm Series 179
Bench Comparator - Series 162, Bench
Centers - Series 967
Digital Hand Tachometers - Series 982
Datatorq - Series 983 - Digital Torque
Wrenches w/SPC output
Miscellaneous Mitutoyo Products and
Accessories
S-22
S-23
S-24
S-24
S-25
S-25
S-26, 27
S-28
S-28
S-29
S-29
S-30
S-31
S-32
S-33
S-34, 35
S-36
S-37
S-38
S-39
S-40
S-02 (2003) full size
12/8/03
6:48 PM
Page 1
OPTICS
Pocket Magnifiers
Series 183
183-201
Features
A handy instrument that is suitable for inspecting metal
surfaces and shear and unevenness in offset printing.
183-202
Specifications
Order No.
183-201
183-202
183-203
Magnification
25X
25X
50X
183-203
Clear Loupe
Series 183
183-301
Features
Drawtube is made of acrylic resin for clear image of
the workpiece.
Drawtube is removable for use as a magnifying glass.
Specifications
Order No.
183-301
183-302
183-303
Magnification
7X
10X
15X
Pocket Comparators/
Magnifiers with Reticles
Series 183
Features
By replacing reticles (optional), dimensional, angle, and
other types of measurements can be performed.
Specifications
Order No.
183-101
183-121
183-131
950757
Magnification
8X
9X
10X
Illumination
Attachment
Comparator (8X) and reticle sets

Order No.
183-901
183-902
S-2
Reticle
183-106
183-102, 106, 107, 183-112, 113, 114
183-302
183-101
183-121
183-131
183-303
12/17/03
9:21 AM
Page 1
DIGITAL PROTRACTOR
Digital Protractor
Series 950
These Digital Protractors present inclination values on an
easy-to-read liquid crystal display. The measurements are
generated by an electronic gravity sensor and processed
by the latest low-power electronic circuit technology.
Features
Full 360 range (90 x 4).

Machined aluminum frame.
Alternate reference (zero).
Reading hold.
Simple calibration requiring no special fixtures.
Display remains upright to view at all angles.
(950-315, Pro 360 Model).
RS232C output. (950-316 Pro 3600 Model).
950-315
DIMENSIONS
6.015"
HOLD
HOLD
0.0
ALT
ZERO
ALT
ZERO
ON/OFF
1.215"
1.9"
140
4.125"
(Distance between two 6-32 tapped holes)
Optional Accessories
Order No.
64PPP794
50AAA983
950-316
Description
Magnetic base
RS-232C Output cable w/foot switch
Specifications
Order No.
Model
Range
Resolution
950-315
Pro 360
360 (90x4)
0.1
Accuracy
0.1Level 10, Plumb 10

0.2 Maximum error
950-316
Pro3600
360 (90x4)
0.01 (0 to 9.99)
0.1 (10 to 90)
0.05 (0 to 10)
0.1 (80 to 90)
0.2 (10 to 80)
0.05
Repeatability
0.1
Cross Axis Error
Minimal
Battery Life
500 Hrs. Standard 9-Volt Battery
Temperature
Operation
-5C to 50C (23 to 122F)
Storage
-20C to 65C (-4F to 149F)
Weight
289g (10.2oz.)
295g (10.4oz.)
Output
N/A
RS-232C Compatible
Standard Accessories
Pouch
Plastic Box
Represents clockwise or counter-clockwise slope.
50AAA983
RS-232C Output Cable
with foot switch 10P-25P
DB25, FEMALE
TO PC OR INTERFACE UNIT
2m
3m
FOOT SWITCH
TO DIGITAL PROTRACTOR
S-3
12/8/03
6:52 PM
Page 1
LEVELS
Precision Levels
Series 960
MITUTOYOs new Series 960 Precision Levels have high
precision longitudinal and transverse vials which make it
possible to check or level surfaces to very high accuracies. An exclusive MITUTOYO Adjustment Screw permits readjustment of the levels after long usage. Levels
are made of high quality cast iron and feature precisely
ground V (140) surfaces. Furnished with a fitted wooden case.
Specifications
Precision Levels
Order No.
960-611
960-612
960-613
Sensitivity
.0012"/12"
.0006"/12"
.00024"/12"
Accuracy
.0006"
.0003"
.00017"
960-612
Dimensions
W
D
H
7.87" 1.73" 1.50"
7.87" 1.73" 1.50"
7.87" 1.73" 1.50"
Levels
(Not available in Canada.)
Specifications
Spirit Levels
Dimensions
D
H
Order No.
980-501
11.81"
.87"
1.93"
980-502
980-503
980-504
23.62"
35.43"
47.24"
.87"
.87"
.87"
1.93"
1.93"
1.93"
Order No.
Dimensions
W
D
H
980-505
11.81"
1.10"
2.32"
980-506
23.62"
1.10"
2.32"
980-507
35.43"
1.10"
2.32"
Order No.
980-508
Dimensions
W
D
H
23.62" 1.06" 2.44"
980-510
47.24"
Remarks
One plumb tube and
one level tube.
Aluminum housing.
Shockproof vials.
980-508
980-506
S-4
1.06"
2.44"
Remarks
Extruded aluminum
housing.
Factory set plumb and
horizontal vials.
Angle setting vial.
Remarks
Aluminum housing.
Two plumb, one
horizontal, one
adjustable vials.
980-502
12/16/03
11:03 AM
Page 1
PROTRACTORS
Digimatic Universal Protractor
187-552
Features
Digimatic Universal Protractor with output function.

Programmable presetting point.
Interchangeable measuring face on the blade.
Can be attached to Height gages.
Battery life: 2000 hours.
Product conforming to the EMC directive.
Specifications
Code No.
Model
Blade
Display
Measuring range
Resolution
Accuracy
Straightness &
Parallelism
Repeatability
Mass
Dust/Water
protection level
Function
Max. response
Battery
Battery life
Alarm
Temperature
Standard
Accessories
187-552
BP-D300E
12" (187-103)
LCD - 5, (-) sign, character height 6.5mm
-360 ~ +360
1' (0.01)
2' (0.03)
4 + L/50m
OPTIONAL ACCESSORIES
Order No.
Description
187-104
6" blade
187-105
Acute angle attachment
950750
Clamp box for Metric Height Gage
905338
Connecting cable 1m (40")
905409
Connecting cable 2m (80")
1' (0.01)
1.45 lbs. (659g)
IP40
Zero, direction select, Data output/Data hold,
Preset, Switchable Segesimal or Decimal
Natation
3 rps
Lithium battery (CR2032) 1pc.
(Part No. 05SAA217)
2,000 hours
Battery voltage low, Over speed error (Err)
Operation temperature: 0 to 40C
Storage temperature: -10 to 60C
12" Blade (Code No. 187-103)
Battery (CR2032) (Part No. 05SAA217)
Clamp box for inch Height Gage (Part No.
950749) Plastic Case
S-5
12/16/03
11:05 AM
Page 1
PROTRACTORS
Universal Bevel Protractor

Series 187
Features
Hardened stainless steel, rust and wear resistant for
long life.
Flush-reading, no parallax error, gives a high degree of
accurate measurements.
With Magnifier glass for easier and faster reading.
187-904
Specifications
Universal Bevel Protractors
Order No.
Graduation
Dial
Vernier
187-904
187-906
5 min
5min
Remarks
with 6" blade (187-104)
and Clamp box for Inch
Height Gages (950749)
with 12" blade (187-103)
and Clamp box for Inch
Height Gages (950749)
Accuracy
Straightness
Parallelism
Vernier Accuracy
"L" is in mm
Universal Bevel Protractor

Accessories and Parts
Order No.
187-103
187-104
187-105
950749
950750
Remarks
12" Blade.
6" Blade.
Acute angle attachment
Clamp box for Inch Height Gages
Clamp box for Metric Height Gages
187-105
Acute Angle Attachment
Protractor
Series 187
The bevel protractor consists of three sheets of stainless
steel, the middle one of which is made for angle measurements.
Specifications
Bevel Protractor
Order No.
Graduation
187-201
1/5 min
S-6
Remarks
Center black knob locks the
blade position
Protractor Graduation: 090,
900
187-201
(4+L/50) m
(4+L/50) m
5'
12/16/03
11:08 AM
Page 1
MEASURING TAPES
Measuring Tapes
Series 980
980-635
Features
Hardened, tempered high phosphated to prevent rust
or corrosion.
Nylon coating.
Quick rewind handle.
980-131
Frame Winder
Series 980
980-160
Features
Hardened, tempered high carbon steel tape, phosphated to prevent rust or corrosion.
Tape is sheathed in heavy duty nylon.
Quick rewind handle.
980-638
Specifications
Measuring Tapes
Inch/Metric
Order No.
980-131
980-140
980-631
980-632
980-635
Length
100 ft
50 ft
66 ft/20m
100 ft/30m
100 ft/30m
Unit of
Measure
in/ft
in/ft
in/mm
in/mm
in/mm
Width of
Blade
3/8"
1/2"
1/2"
1/2"
1/2"
Blade
Color
white
white
yellow
yellow
white
Remarks
Tough ABS
Tough ABS
Tough ABS
Tough ABS
Tough ABS
Unit of
Measure
in/ft
in/ft
in/mm
Width of
Blade
3/8"
3/8"
1/2"
Blade
Color
white
white
yellow
Remarks
Tough ABS plastic housing
Unit of
Measure
in/mm
in/mm
Width of
Blade
10mm
10mm
Blade
Color
white
white
Remarks
plastic
plastic
plastic
plastic
plastic
housing
housing
housing
housing
housing
Frame Winder Tapes

Order No.
980-160
980-161
980-630
Length
100 ft
150 ft
100ft/30m
Measuring Tapes
Order No.
980-637
980-638
Length
66 ft/20m
100 ft/30m
S-7
12/16/03
11:09 AM
Page 1
MEASURING TAPES
Digital Tape Measure

Series 216
LCD display
Strap
1.73"(44)
.04"(1)
1.61"(40.8)
Unlock lever
in(decimal)/in(fraction)/mm select button
2.95"(75)
ZERO-set
button
.75"(19)
ON/OFF
button
belt hook
3.31"(84)
Battery cap
HOLD button
4"(101.6)
hook
Reference surfaces
216-380
Dimensions: inch(mm)
Mitutoyo's new Digital Tape Measure is a fast and

convenient tool for a wide range of length measuring
jobs. Its digital readout is displayed on a large,
easy-to-read LCD. The zero set button allows the origin
point to be set at any time, eliminating the need for
manually calculating comparison measurements. The
one inch steel blade is also easy to read.
Specifications
Order No.
Model
Measuring range(L)
Blade width
Resolution
Instrumental error
Scale graduation
Accuracy of the scale graduation
Battery
Battery life
Mass
L=Measuring length. (m)
S-8
216-380
TD-S551C
216" / 18' / 5.5m
1"
.01" / 1/32" / 0.1mm
0.06" / 1/16" / 1.5mm
Inch: 06" 1/32", 6216" 1/16" / Metric: 1mm
1.5mm/0.6"
Lithium cell CR2032 (05SAA217)
2500 hours
0.86 lbs. (390g)
12/8/03
7:04 PM
Page 1
RADIUS GAGES/PROTRACTORS
Radius Gages
Series 186
Features
Each radius gage has five measuring locations.

Each location is identified with its particular radius.
Decimal radius gages available up to 1".
Fractional radius gages available up to 1".
Accuracy: .0016"/0.04mm"
Order No.Range
186-101 1/321/4" .......................................................30
186-102 17/641/2" .....................................................32
186-103 1/3217/64" ...................................................16
186-104 9/3233/64" ...................................................18
186-105 17mm...........................................................34
186-106 7.515mm......................................................32
186-107 15.525mm....................................................30
leaves
leaves
leaves
leaves
leaves
leaves
leaves
Protractor
186-102
968-201
Series 968
with Rectangular Base
Basegular Base Protractors scale plate and indicator blade are
made entirely of stainless steel. (968-201) (968-202 and 986203 Satin chrome finish). With 6" arm.
Specifications
Rectangular Base Protractor
Graduation
1
Remarks
Protractor Graduation: 090,
90180, 18090, 900
Semi-Circle: 0-180, 180-0
Rectangle: 0-180, 180-0
968-202
1
968-203*
*6 Arm with graduation rule.
968-202
.55"
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
R45
MADE IN JAPAN
00
00
2.36"
3.70"
6.18"
8.03"
.05"
Order No.
968-201
968-203
S-9
12/8/03
6:44 PM
Page 1
RADIUS GAGES
Radius Gages
Series 186
Decimal Radius Gages to 1"
Fractional Radius Gages to 1"
MITUTOYO Radius Gages are recommended for checking or laying out concave or convex radii. An individual
gage for each dimension makes it possible to verify
radius or fillet dimensions easier, faster and more accurately in machining, layout, inspection and pattern-making work. The measuring surfaces are precisely finished
with smooth, accurate edges. The Radius Gages are
available separately or in six handy sets.
Each Radius Gage has five measuring locations, and it
is identified with its particular radius dimensions. The
gages have a satin or dull-chrome finish.
The Holding Cases, provided to protect the sets of
Radius Gages, have indexed pockets to facilitate the
selection of the proper size gage. A 4" long holder is furnished with Set No. 186-901 to make it possible to
check radii in confined or hard-to-reach locations.
186-901
Specifications
Accuracy: .0016"/0.04mm
Radius Gage
Order No.
No. of Leaves
186-901
25
186-903
186-904
186-905
17
8
8
186-906
186-907
Radius
.010"
.015"
.020"
.025"
.030"
.040"
.050"
.060"
.070"
.080"
.090"
.100"
.120"
.140"
.160"
.180"
.200"
.220"
S-10
26
10
Decimal
Part No.
211798
211799
211800
211801
211802
211803
211804
211805
211806
211807
211808
211809
211810
211811
211812
211813
211814
211815
Sizes
1/64"17/64" by 64ths
and 9/32"1/2" by 32nds
1/64"17/64" by 64ths
9/32"1/2" by 32nds
9/16"1" by 16ths
.010.030" by .005"
.040.100" by .010"
.120.220" by .020"
.240.300" by .020"
.350.500" by .050"
.5501" by .050"
Fraction
Radius
Part No.
1/64"
201441
1/32"
201442
3/64"
201443
1/16"
201444
5/64"
201445
3/32"
201446
7/64"
201447
1/8"
201448
9/64"
201449
5/32"
201450
11/64"
201451
3/16"
201452
13/64"
201453
7/32"
201454
15/64"
201455
1/4"
201456
17/64"
201457
9/32"
201458
5
2
3
4
5 concave and convex radii per each leaf.
Radius
.240"
.260"
.280"
.300"
.350"
.400"
.450"
.500"
.550"
.600"
.650"
.700"
.750"
.800"
.850"
.900"
.950"
1.000"
Decimal
Part No.
211816
211817
211818
211819
211820
211821
211822
211823
211824
211825
211826
211827
211828
211829
211830
211831
211832
211833
Fraction
Radius
Part No.
5/16"
201459
11/32"
201460
3/8"
201461
13/32"
201462
7/16"
201463
15/32"
201464
1/2"
201465
9/16"
211790
5/8"
211791
11/16"
211792
3/4"
211793
13/16"
211794
7/8"
211795
15/16"
211796
1"
211797
12/8/03
6:47 PM
Page 1
ANGLE GAGES
Angle Gages
Series 186
Features
Manufactured from stainless steel, satin finished.

18 individual gages for easy use.
Eight gaging surfaces per gage.
Precision finished edges for accurate checking.
Each gage checks primary, 1/2 primary and complementary angles.
Sharp cornered workpieces can be checked at all
8 angles except below 50 on primary angle 2.
Quick and accurate inspection of angles and I.D.
or O.D. chamfersin or out of the machine.
Positioning of lathe tools for chamfers.
Inspecting angles on ground form tools and cutters.
Fast set-ups and fixturing of workpieces.
Eliminates time consuming measuring set-ups.
Specifications
Angle Gages
Set Order No.
186-910
Description
Angle Gage Set w/case
No. of Leaves
18
Part No.
051000*
051001*
051002*
051003
051004
051005
051006
051007
051008
051009
051010
051011
051012
051013
051014
051015
051016
051017
051018
* Angle 2
Individual Part No.

Inch
Primary 1/2 Primary
Angle Angle
Accuracy
5
2 30'
5'
10
5
5'
15
7 30'
5'
20
10
5'
35
12 30'
5'
30
15
5'
35
17 30'
5'
40
20
5'
45
22 30'
5'
50
25
5'
55
27 30'
5'
60
30
5'
65
32 30'
5'
70
35
5'
75
37 30'
5'
80
40
5'
85
42 30'
5'
90
45
5'
Vinyl Case
omitted
1
7
Complementary
Angle
175
170
165
160
155
150
145
140
135
130
125
120
115
110
105
100
95
90
Angles 1, 2, 3, 4 are primary

Angles 5, 6, are complementary
Angles 7, 8 are 1/2 primary
Gaging of angles of adjoining

inside/outside diameters or
flat surfaces.
Gaging of the countersink

angles of drilled and
tapped holes.
Gaging of primary and complementary angles from a

surface plate.
Gaging of I.D. and O.D.
chamfers.
Included angles are easily
verified.
S-11
12/8/03
6:49 PM
Page 1
GAGES
Depth Gage, Adjustable Angle

Series 950
Features
Head made of hardened steel.

Base surface measures 21/2" x 1/8" thick.
Includes 6" rule: 7/32" wide and .041" thick.
Includes 6" rod: 3/32" diameter.
Order No.
Protractor
Graduation
Rule
Graduation
950-271
30, 45, 60
1/32,1/64
950-271
Pitch Gages
Series 188, 950
Features
Pitch size is stamped on each gage.
Whitworth, Unified and Metric Pitch Gages.
Specifications
Order No.
Range
Composition of Gages
Whitworth Screw Pitch Gages (55)

188-101
4 - 42 TPI
(30 leaves)
4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2,

12, 13, 14, 15, 16, 18, 20, 22, 24, 26,
27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 12, 13, 14,

16, 18, 19, 20, 22, 24, 25, 26, 28, 30,
32, 34, 36, 40, 48, 60 TPI
Unified Screw Pitch Gages (60)
188-111
4 - 42 TPI
4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2,
(30 leaves) 12, 13, 14, 15, 16, 18, 20, 22, 24, 26,
27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
950-253
4 - 84 TPI
4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2,
(51 leaves) 12, 13, 14, 15, 16, 18, 20, 22, 24, 26,
27, 28, 30, 32, 34, 36, 38, 40, 42, 44,
46, 48, 50, 52, 54, 56, 58, 60, 62, 64,
66, 68, 70, 72, 74, 76, 78, 80, 82, 84 TPI
Metric Screw Pitch Gages (60)
188-130
0.35 - 6mm 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8,
(22 leaves) 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5,
5, 5.5, 6mm and 60 angle gage
188-122
0.4 - 7mm 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5,
(21 leaves) 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,
7mm
188-121
0.4 - 7mm 0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5,
(18 leaves) 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
Metric and Unified Screw Pitch Gage Set (60)
188-151
0.4 - 7mm Set of 188-122 and 188-111
4 - 42 TPI
(51 leaves)
188-102
S-12
4 - 60 TPI
(28 leaves)
188-102
12/9/03
10:15 AM
Page 1
GAGES
Thickness Gages
Series 184, 950
950-251
Specifications
Thickness Gages Inch
Order No.
Range
184-101
.0015"-.015"
(9 leaves)
184-102
.004" - .025"
(22 leaves)
184-405
.002" - .025"
(15 leaves)
184-406
.0015" - .025"
(18 leaves)
950-251
.002" - .035"
(26 leaves)
950-252
.0015" - .025"
(26 leaves)
950-254
.0015" - .200"
(15 leaves)
950-255
.0015" - .200"
(13 leaves)
950-256
.0015" - .015"
(8 leaves)
Thickness Gages Metric
184-302
0.03 - 0.5mm
(13 leaves)
184-307
0.03 - 0.5mm
(13 leaves)
184-303
0.05 - 1mm
(28 leaves)
184-313
0.05 - 1mm
(28 leaves)
184-306
0.05 - 0.8mm
(10 leaves)
Type of Blade
Tapered
Blade Length
3"
Composition of leaves
.0015, .002, .003, .004, .006, .008,.010, .012, .015"
Tapered
3"
.004 thru .025" by .001" step
Straight
3"
Tapered
3"
.002, .003, .004, .005, .006 ,.008, .010, .012, .013,

.015, .018, .019, .020, .022, .025
.0015 thru .0055" by .0005" step, .006 thru .010"
by .001" step plus .012, .015, .020, .025"
.002 thru .018" by .001" step
plus .022, .024, .025, .028, .030, .032, .035"
.002 thru .025" by .001" step
plus .0015, .0025"
.0015, .002, .003, .004, .006, .008, .010, .012, .015,
.020, .030, .040, .075, .100, .200"
.0015, .002, .003, .004, .006, .008, .010, .020, .030,
.040, .075, .100, .200"
.0015, .002, .003, .004, .008, .010, .012, .015"
Straight
1/2" width
Tapered
1/4" width
Straight
1/2" width
Straight
1/2" width
Straight
1/2" width
3"
at tip
3"
at tip
3"
at tip
4 1/2"
at tip
6"
at tip
Straight
150mm
Straight
100mm
Straight
150mm
Straight
100mm
Straight
100mm
0.03 thru 0.1mm by 0.01mm step

plus 0.15, 0.2, 0.3, 0.4, 0.5mm
plus 0.15, 0.2, 0.3, 0.4, 0.5mm
0.05 thru 0.15mm by 0.01 mm step
0.2 thru 1 mm by 0.05mm step
0.2 thru 1mm by 0.05mm step
Center Gage
Series 950
Features
Hardened with lapped edges and notches.
Meets requirements of the American National
and US 60 Standards.
Scales with 14ths and 20ths graduations
provided on one side, 24ths and 32nds on
reverse side.
Order No.
950-201
950-201
Description
Center Gage
S-13
12/16/03
10:59 AM
Page 1
GAGES
Standard Gages
Series 950
Specifications
Order No.
950-202
950-203
950-203
950-202
Standard Gages
Inch
Description
Am. Standard Wire Gage
U.S. Standard Wire Gage
Size
Gage No. 036
Gage No. 036
Tap and Drill Gage

Series 950
Features
Each drill gage has a total of 29 holes marked with drill size
in fractions and decimals.
Tap and drill gage shows the correct tap drill for National Fine
or National Coarse thread series.
Approximate plate size is 6-3/8" x 2-1/2" x 5/64".
Specifications
950-204
950-209
Tap and Drill Gage

Inch/Metric
Order No.
950-200
950-204
950-206
950-207
950-208
950-209
Description
Drill Gage
Tap and Drill Gage
Drill Gage
Metric Drill Gage
Metric Drill Gage
Drill Gage
Size
61-80 Twist Drill and Drill Rod
Tap Size 256 to 1/428
Drill Size 1/16" to 1/2"
1.5 to 12.5mm 30 holes
1.0 to 5.9mm 57 holes
Drill size A to Z
Drill Point Gage

Features
For measuring properly grounded 59 drill tips.
Rule and slide made of steel.
Satin chrome finish.
Slide graduated in 32nds.
End clip is adjustable and removable.
Versatile - Can be used as Rule, Hook Rule, Try Square, Depth
Gage or Caliper, and for Layout
950-275
Specifications
Order No.
950-275
Size
6"
Rule Graduations
1/8, 1/16, 1/32, 1/64
Thread Gage
Features
Used for grinding and setting tools when cutting acme threads
whose side have an inclination of 14-1/2 (29 included angle)
Specifications
Order No.
950-257
S-14
Description
29 acme screw thread gage
950-257
12/8/03
6:56 PM
Page 1
EDGES & SQUARES
Knife Edge
Straight Edge
528-103
Series 528
916-402
The test edge is approximately .004" in thickness, a

cross section of which has radius to provide a straight
line contact with the work surface. Straightness is
.00005".
For ease of inspection, the blade is dyed in black, and
the upper edge is covered with a grip plate. The acute
angle is 30 degrees.
916-401
916-100
528-104
Specifications
Knife Edge Straight Edge
Inch
Length
4"
6"
8"
10"
Order No.
528-102
528-103
528-104
528-105
916-424
Remarks
with protective
with protective
with protective
with protective
cover
cover
cover
cover
916-423
Steel Squares
916-422
916-421
Series 916
Regular type and beveled-edge type squares are available from MITUTOYO.
All edges are hardened and precision ground.
(Only blade is hardened on engineers Square)
Beveled Edge Squares
Inch
Size
2"
3"
4"
6"
8"
Order No.
916-100
916-101
916-102
916-103
916-104
Outs. Dim.
2 x 1.6"
3 x 2"
4 x 2.75"
6 x 4"
8 x 5"
Squareness
.00010"
.00011"
.00012"
.00014"
.00018"
Regular Squares
Inch
3"
4"
6"
8"
10"
12"
16"
20"
30"
40"
916-401
916-402
916-403
916-404
916-405
916-406
916-407
916-408
916-409
916-410
2.9 x 1.9"
3.9 x 2.7"
5.9 x 3.9"
7.8 x 5.1"
9.8 x 6.5"
11.8 x 7.8"
15.7 x 9.8"
19.6 x 11.8"
29.7 x 15.7"
39.3 x 19.6"
.00026"
.00028"
.00032"
.00036"
.00040"
.00044"
.00052"
.00059"
.00080"
.00116"
916-410
916-409
916-408
Regular Squares Engineers Square
Inch
31/2"
5"
7"
101/2"
133/4"
916-591
916-592
916-593
916-594
916-595
3.8 x 2.2"
5.3 x 3.4"
7.2 x 4.2"
10.8" x 5.7"
14.2 x 7.3"
.00063"
.00063"
.00063"
.00079"
.00094"
Beveled Edge Squares with Beam

Inch
3"
4"
6"
8"
916-421
916-422
916-423
916-424
3
4
6
8
x
x
x
x
2"
2.75"
4"
5"
.000091"
.000094"
.00010"
.00011"
S-15
12/8/03
6:58 PM
Page 1
COMBINATION SQUARE SETS
Combination Square Sets

Series 180
Blades only
Inch/Metric
Order No.
180-401
180-402
180-403
180-405
180-501
180-502
180-503
180-505
180-701
180-702
180-703
180-705
180-601
180-602
180-603
180-605
Length
6"
6"
6" x 150mm
150mm
12"
12"
12" x 300mm
300mm
18"
18"
18" x 450mm
450mm
24"
24"
24" x 600mm
600mm
Graduations
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
Accuracy (length)
+.005" (+0.13mm)
-.002" (-0.05mm)
+.006" (+0.15mm)
-.003" (-0.075mm)
180-102
Set No. 180-905
Description
Square Head for 6" models
Square Head for 12" to 24" models
Center Head for 6" models
Center Head for 12" to 24" models
180-201
Inch (Cast Iron-Not Hardened)

Order No.
180-111
180-112
180-211
180-212
180-301
180-501
180-202
Heads only
Inch (Hardened Cast Iron)
Order No.
180-101
180-102
180-201
180-202
180-301
+.004" (+0.1mm)
-.002" (-0.05mm)
Description
Square Head for 6" models
Square Head for 12" to 24" models
Center Head for 6" models
Center Head for 12" to 24" models
Protractor Head for 12" to 24" models
180-401
Set No. 180-901

180-101
Specifications
Combination Square Sets
Inch
Set No.
180-801
180-802
180-803
180-804
180-805
180-806
180-901
180-902
180-903
180-904
180-905
180-906
6"
6"
12"
12"
12"
12"
6"
6"
12"
12"
12"
12"
Blade
(4R)
(16R)
(4R)
(16R)
(4R)
(16R)
(4R)
(16R)
(4R)
(16R)
(4R)
(16R)
Square Head
180-111
180-111
180-112
180-112
180-112
180-112
180-101*
180-101*
180-102*
180-102*
180-102*
180-102*
Center Head
180-211
180-211
180-212
180-212
180-212
180-212
180-201*
180-201*
180-202*
180-202*
180-202*
180-202*
Blade
180-503
180-503
Square Head
180-112
180-102*
Center Head
180-212
180-202*
Protractor Head
180-301
180-301
Blade
180-505
180-505
Non-Hardened Heads.
Square Head
180-112
180-102*
Center Head
180-212
180-202*
Protractor Head
180-301
180-301
180-401
180-402
180-501
180-502
180-501
180-502
180-401
180-402
180-501
180-502
180-501
180-502
Protractor Head
180-301
180-301
180-301
180-301
Inch/Metric
Set No.
180-807
180-907
12"/300mm
12"/300mm
Metric
Set No.
180-810
300mm
180-910
300mm
*Hardened Cast Iron Heads.
S-16
12/8/03
7:00 PM
Page 1
RULES
Steel Rules
Series 182
182-125
Features
Stainless tempered.
Black chrome rule.
182-110
Specifications
Wide Rigid Rules (Thickness 3/64")
Black Chrome
Rule
Order No. Order No.
Size
182-101
182-109
6"(4R)
182-102
182-112
6"(16R)
182-103
182-110
6"(5R)
182-104
182-113
6"(3R)
182-105
182-114
6" x 150mm
182-106
6" x 150mm
182-107
6" x 150mm
182-108
6" x 150mm
182-111
182-115
150mm
182-121
182-127
12"(4R)
182-122
182-129
12"(16R)
182-123
182-128
12"(5R)
182-124
12"(3R)
182-125
182-130
12" x 300mm
182-126
12" x 300mm
182-131
182-132
300mm
182-241
182-146
18"(4R)
182-142
182-148
18"(16R)
182-143
182-147
18"(5R)
182-144
18"(3R)
182-145
18" x 450mm
182-151
450mm
182-161
182-166
24"(4R)
182-162
182-168
24"(16R)
182-163
182-167
24"(5R)
182-164
24"(3R)
182-165
24" x 600mm
182-171
600mm
182-401
36"(4R)
182-403
36"(16R)
182-405
36"(5R)
182-406
36" x 900mm
182-402
48"(4R)
182-404
48"(16R)
182-407
48" x 1000mm
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1/8
1/32
1/32
Graduations
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100
1mm
1/100
1mm
1/50
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1mm
1/16
1/32
1/64
1/50
1/64
1mm
1/16
Width
1/64th
3/4"
1/100th
3/4"
1/100th
3/4"
1/50th
3/4"
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
1/64
1/100th
1/100th
1/100th
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
1/64
1/100th
1/100th
0.5mm
1/64
1/100th
0.5mm
3/4"
Accuracy (Length)
+.004"/.002"
(+0.1mm/0.05mm)
3/4"
3/4"
3/4"
19mm
1"
1"
1"
1"
1"
1"
25mm
13/16"
13/16"
13/16"
13/16"
13/16"
30mm
13/16"
13/16"
13/16"
13/16"
13/16"
30mm
11/4"
11/4"
11/4"
11/4"
11/4"
11/4"
11/4"
+.005/.002"
(+0.13mm/0.05mm)
+.006"/.003"
(+0.15mm/0.075mm)
+.007"/.003"
(+0.18mm/0.075mm)
+.008"/.003"
(+0.20mm/0.075mm)
S-17
12/8/03
7:02 PM
Page 1
RULES
Steel Rules
Series 182
182-265
Features
Stainless tempered.
182-223
Specifications
Full-Flexible Rules (Thickness 1/64")
Black Chrome
Rule
Order No. Order No.
Size
182-201
182-212
6"(4R)
182-202
182-214
6"(16R)
182-203
182-213
6"(5R)
182-204
182-215
6"(3R)
182-205
182-216
6" x 150mm
182-206
6" x 150mm
182-207
6" x 150mm
182-208
6" x 150mm
182-211
182-209
150mm
182-221
182-217
12"(4R)
182-222
182-219
12"(16R)
182-223
182-218
12"(5R)
182-224
12"(3R)
182-225
182-220
12" x 300mm
182-226
12" x 300mm
182-231
182-210
300mm
182-141
182-246
18"(4R)
182-242
182-248
18"(16R)
182-243
182-247
18"(5R)
182-244
18"(3R)
182-245
18" x 450mm
182-251
450mm
182-261
182-266
24"(4R)
182-262
182-268
24"(16R)
182-263
182-267
24"(5R)
182-264
24"(3R)
182-265
24" x 600mm
182-271
600mm
Flexible Rules
182-411
36"(4R)
182-413
36"(16R)
182-415
36"(5R)
182-416
36" x 900mm
182-412
48"(4R)
182-414
48"(16R)
S-18
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1/32
1mm
Graduations
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100
1mm
1/100
1mm
1/50
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm
1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm
1mm
1/8
1/16
1/32
1/64
3/4"
1/32
1/64
1/50
1/100th
3/4"
1/32
1/64
1/10
1/100th
3/4"
1/32
1/64
1mm
0.5mm
1/8
1/16
1/32
1/64
3/4"
3/4"
1/32
1/64
1/50
1/100th
3/4"
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1/16
Width
1/64th
1/2"
1/100th
1/2"
1/100th
1/2"
1/50th
1/2"
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
1/2"
12mm
3/4"
3/4"
3/4"
3/4"
3/4"
18mm
3/4"
3/4"
3/4"
3/4"
3/4"
18mm
1/2"
Accuracy (Length)
+.004"/.002"
(+0.1mm/0.05mm)
1/2"
1/2"
12mm
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
+.005"/.002"
(+0.13mm/0.05mm)
+.006"/.003"
(+0.15mm/0.075mm)
+.007"/.003"
(+0.18mm/0.075mm)
+.008"/.003"
(+0.20mm/0.075mm)
12/8/03
7:05 PM
Page 1
RULES
Semi-Flexible Rules
Series 182
(Thickness 1/64")
Features
182-304
Engraved on frontside only.
Specifications
Inch/Metric
Order No.
Size
182-301
4" x 100mm
1/2mm
1mm
182-302
6" x 150mm
1/2mm
1mm
1/32
182-304
10" x 250mm
1/2mm
1mm
1/32
182-305
12" x 300mm
1/2mm
1mm
182-307
20" x 500mm
1/2mm
40" x 1000mm
1/2mm
182-309
Graduations
1/32
1/64
1/16th
Width
5/8"
1/64
1/16th
5/8"
1/16th
1/16th
5/8"
1/32
1/64
1/64
1mm
1/32
1/64
1mm
1/32
1/64
1/16th
1/16th
5/8"
5/8"
Accuracy (Length)
+.004"/.002" (+0.1mm/0.05mm)
5/8"
+.006"/.003" (+0.15mm/0.075mm)
+.008"/.004" (+0.2mm/0.1mm)
Hook Rules
Series 182
(Thickness .040")
Features
Hardened and tempered tool steel.
Hard chrome finish.
Furnished with adjustable hook.
182-421
Specifications
Order No.
Size
1/16
Graduations
1/32
182-421
6"(4R)
1/8
182-422
12"(4R)
1/8
1/16
1/32
182-423
18"(4R)
1/8
1/16
1/32
1/64
Width
3/4"
1/64
1/64
1"
1-1/8"
Accuracy (Length)
+.0004"/.002"
+.0005"/.002"
Pocket Steel Rule

Series 950
with Pocket Clip (thickness 1/64")
950-300
Features
Engraved on frontside only.
Backside: Inch/Metric equivalents
Order No.
Size
950-300
6" x 150mm
Graduation
1mm
1/64ths
Width
1/2"
Accuracy (Length)
+.004"/.002" (+0.1mm/0.05mm)
S-19
12/8/03
6:45 PM
Page 1
DEMAGNETIZERS AND PRECISION SINE VISES
Demagnetizers
Series 986
MITUTOYO Table-Top Demagnetizers make it possible to
remove magnetic forces, retained in workpieces,
tools or plates of any description, by simply touching
the magnetized piece to the demagnetizer surface.
Magnetism in thick materials can be removed by touching
both outside surfaces to the demagnetizer.
Specifications
Demagnetizers
986-275
Dimensions
Order No. Mass
W
D
H
Remarks
986-271
12.79 lbs. 6.30" 4.72" 4.72"
986-275
20.94 lbs. 7.87" 5.91" 3.94" Waterproof Type
Precision Sine Vises

Series 986
986-121
Features
Precision Vise, Order No. 986-124, provides sine function on one axis. Metric square gage blocks recommended for precise angle settings. Positive locking provided on each sine function base to assure positive
locking at angle setting without distortion.
Vises made of hardened (HRC-60) alloy tool steel.
Stress relieved, through subzero treatment, to assure
dimensional stability and high accuracy over long lasting service.
Parallelism within .0001"/4".
Squareness within .0002"/4".
Roller Center Distance within .0001".
Rollers hardened and ground to within
.00005" of same diameter.
Supplied with plastic case.
986-124
C
A
B
E
Elevating Knob
Specifications
Precision Sine Vises
Inch
Order No.
986-121
986-122
986-124
S-20
Clamping
Capacity
3.54"
4.72"
3.77"
Maximum
Angle
45
45
45
A
2.75"
3.54"
2.95"
B
3.72"
4.51"
3.72"
Dimensions
C
1.18"
1.57"
1.18"
D
6.69"
8.27"
6.30"
E
3.13"
3.76"
3.13"
12/8/03
6:47 PM
Page 1
PRECISION VISES
Precision Vises
Series 986
The Mitutoyo Precision Vises are designed to provide
many years of dependable workpiece holding service.
These units are ideal for precision grinding, finishing
and marking operations.
986-106
A
Features
Parallelism: within .0001"/4".

Squareness: within .0002"/4".
Outstanding stability from subzero treatment.
Hardness to Rockwell C Scale: HRC 60.
Specifications
Precision Vises
Order No.
986-106
986-107
Clamping
Capacity
3.15"
4.72"
A
6.30"
8.26"
Dimensions
B
C
2.75"
2.44"
3.54"
2.95"
D
1.18"
1.57"
Order No.
986-101
986-102
986-111
986-112
Clamping
Capacity
3.15"
4.72"
1.22"
5.90"
A
6.30"
8.26"
3.54"
11.22"
Dimensions
B
C
2.75"
2.44"
3.54"
2.95"
2.36"
1.96"
4.72"
3.54"
D
1.18"
1.57"
.98"
1.57"
986-111
A
D
C
Precision
Hydraulic Vise
986-116
Relatively light handle-exertion will produce, through

hydraulic leverage, up to 1.5 ton clamping pressure
on workpiece.
Specifications
Precision Hydraulic Vise
Order No.
986-116
Clamping
Capacity
5.90"
A
11.22"
Dimensions
B
C
4.72"
3.54"
D
1.57"
S-21
12/8/03
6:49 PM
Page 1
SINE PLATES
Precision Sine Plates

Series 986
A
Features

Roller center distance within .0001".
986-126
5"
Elevating Knob
Specifications
Precision Sine Plates
Order No.
Plate
Size
Maximum
Angle
Dimensions
B
C
986-126
5.90" x 5.90"
45
5.90"
5.90"
2.54"
Precision Magnetic
Sine Plates
Remarks
Sine Function:
One Axis
Series 986
B
Features
986-127

Roller center distance within .0001".
1.3"
C
5"
Specifications
Precision Magnetic Sine Plates
Order No.
Plate
Size
Maximum
Angle
986-127
5.90" x 5.90"
45
5.90"
S-22
Dimensions
B
C
5.90"
3.84"
Remarks
Sine Function:
One Axis
12/8/03
6:51 PM
Page 1
PRECISION VISES
Precision Two and

Three Dimensional Vises
986-136
Series 986
Features
Precision Two Dimensional Vises, Order Nos. 986-136
and 986-137 are basic vises for precise cutting, grinding and engraving operations. Precision Vise No. 986137 has hydraulic leverage for clamping pressure.
All Precision Vises are made of hardened (RC-60)
alloy tool steel. Stress relieved through sub-zero
treatment, to assure dimensional stability and high
accuracy over long lasting service.
Parallelism within: .0001"/4".
Fine adjustment screw provided on the swiveling base.
5-minute vernier is attached to graduation of the
rotation and angle.
40
70
80 90 80 70
60
50
60
10 20
50
50
60
30
20 10
0 10 20
20 10 0
80 90 80 70
30
70
40
60
50
50
60
60
20 10 0 10 20
50
Specifications
Precision Two and Three Dimensional Vises
Order No.
986-136
986-137
Clamping
Capacity
3.15"
10.72"
A
4.33"
6.30"
B
2.75"
4.72"
Dimensions
C
D
6.30"
1.18"
11.22"
1.56"
E
5.39"
8.26"
F
7.08"
10.63"
S-23
12/8/03
6:54 PM
Page 1
MAGNETIC V-BLOCKS
Magnetic V-Block
Series 986
Precisely finished V-blocks will hold tools or workpieces
firmly for measuring or scribing. Magnetism controlled by
on-off switch actuated by furnished Allen Wrench.
986-291
Specifications
Magnetic V-Block
Parallelism
(under-base
Order No. of V-surface)
986-291
.0004"
986-292
.0006"
986-293
.0006"
Note: 2 pcs. per Order No.
B1
Mass
2.2 lbs
6.6 lbs
11.0 lbs
90
Pull
(V-surface)
22.0 lbs
33.0 lbs
55.1 lbs
Dimensions
A
B
H
1.57" 2.67" 1.96"
1.96" 4.33" 3.15"
1.96" 5.90" 3.93"
B1
1.41"
2.36"
3.54"
Holding
Capacity
2"
3.3"
5"
Magnetic
Adjustable Links
Series 986
986-256
Two magnetic holders, linked together, provide a means

of mounting workpieces at any angle to facilitate assembly procedures or operations such as welding. Link with
V-groove holders (Order No. 986-254) will adhere to
and/or hold curved as well as flat surface.
Specifications
986-254
Magnetic Adjustable Links

Order No.
986-251
986-254
986-256
Pull
22.0 lbs
176.3 lbs
77.1 lbs
Mass
1.43 lbs
4.41 lbs
5.51 lbs
Dimensions
.98" x 2.28" x .98" x 5.0"
1.81" x 2.36" x 1.96" x 6.10"
5.90" x 5.90" x 1.37"
Remarks
w/ON/OFF switch
90
Magentic V-Blocks
V-Blocks and Clamps

Series 181
181-146
Specifications
Magnetic V-Block (series 181)
Accuracy
(over all)
.0006"
Pull
132.2 lbs
1 Piece
Holding
Capacity
2"
2.99"
Order No.
181-146
2.52"
1.5"
V-Blocks & Clamps

Parallelism
(each
block)
181-901
.00024"
.0005"
181-902
0.006mm
0.012mm
181-904
.00024"
.0005"
Remarks
Matched Pair V-Blocks with Clamps
Clamping Capacities: 1"
Clamping Capacities: 25mm
Clamping Capacities: 2"
V-Blocks
Note: 2 pcs. per Order No.

1.61"/41mm
(2.95")
S-24
.85"
2.28"
181-901
(Matching Pair)
1.26"/32mm
(2.28")
Order No.
Parallelism
(base surface
to V-surface)
( ): Size for
181-904
1.26"/32mm
(2.28")
12/8/03
6:56 PM
Page 1
MAGNETIC HOLDERS
Magnetic
Hexagonal Holder
Series 986
1.22"
90
4.25"
1.37"
4.
25
"
986-261
Multiple surfaces and angles require a holder for firmly

mounting oddly shaped pieces, as well as bars and
plates, during measuring, scribing, welding and drilling
operations. Angles of 45, 90 and 135. Lever turns
magnetic force on or off.
Specifications
Magnetic Hexagonal Holder
Order No.
986-261
Pull
176.3 lbs
120
Mass
12.3 lbs
.59"
.59"
5.35"
Magnetic
Cubic Blocks
Series 986
Blocks numbered 986-301, 302, and 307 feature magnetic forces in the two V grooves on the top surface, in
addition to the balance of the top surface and two side
surfaces.
Blocks numbered 986-303, 304, 305 and 306 have magnetic forces in the V groove on the top and the balance
of the top surface.
986-301
TRI-SURFACE ATTRACTING TYPE
A
D
90
Specifications
986-303
SINGLE SURFACE ATTRACTING TYPE
A
D
D
90
Magnetic Cubic Blocks
Accuracy
(under-base
Order No. Pull
Mass
of V-surface)
986-301 176.3 lbs 15.4 lbs .0004"
986-302 308.6 lbs 48.5 lbs .0006"
986-303* 88.1 lbs
13.2 lbs .0008"
986-304* 176.3 lbs 37.5 lbs .0006"
986-305* 220.4 lbs 70.5 lbs .0008"
986-307 330.7 lbs 116.8 lbs .0008"
* Single Surface Attracting Type.
Dimensions
A
B
3.93" 3.93"
5.90" 5.90"
3.93" 3.93"
5.90" 5.90"
7.87" 7.87"
7.87" 7.87"
C
3.93"
5.90"
3.93"
5.90"
7.87"
7.87"
D
.98"
1.18"
1.57"
1.57"
1.96"
1.37"
986-322
986-321
Magnetic Holders
Series 986
Specifications
Magnetic Holders (series 986)
Order No.
986-311
986-312
986-313
Pull
1.7 lbs
6.6 lbs
11.0 lbs
Mass
.02 lbs
.02 lbs
.09 lbs
Dimensions
.39" (DIA) x .59"
.59" (DIA) x .59"
.78" (DIA) x .78"
986-314
22.0 lbs
.13 lbs
.98" (DIA) x .98"
986-315
66.1 lbs
.35 lbs
1.57" (DIA) x 1.37"
986-321
986-322
11.0 lbs
22.0 lbs
.26 lbs
.55 lbs
.98" x .98" x .98"

.98" x 2.28" x .98"
Remarks
Connect bolt hole

M6 (P = 1.0mm)
Connect bolt hole
M8 (P = 1.25mm)
986-311
986-313
S-25
12/8/03
6:59 PM
Page 1
MAGNETIC CHUCKS
Permanent Magnetic
Chucks
Series 986
986-204
Strong Rectangular Type Chucks

Thicker workpieces will be held firmly, during grinding
operations, with this coarser pitch, more powerful magnetic chuck.
Regular Rectangular Type
Pitchless Chucks
Pitchless chucks are recommended for use when grinding small and/or thin workpieces as small as 4mm DIA.,
as thin as 0.2mm.
986-211
d
A
B
off
on
Specifications
Permanent Magnetic ChucksStrong Rectangular Type
Inch
Order No.
986-201
986-202
986-203
986-204
986-205
Mass
12.1 lbs
17.6 lbs
22.0 lbs
37.4 lbs
44.1 lbs
A
3.93"
3.93"
4.92"
5.90"
5.90"
B
5.55"
8.38"
8.38"
9.33"
11.22"
C
2.28"
2.28"
2.28"
2.36"
2.36"
D
1.22"
1.22"
1.22"
1.57"
1.57"
E
7.28"
10.23"
10.23"
12.36"
14.33"
(DIA) d
.39"
.39"
.39"
.55"
.55"
C
1.85"
2.36"
D
1.22"
1.57"
E
5.51"
12.36"
(DIA) d
.39"
.55"
Regular Rectangular Type Pitchless Chucks

Order No.
986-211
986-215
S-26
Mass
5.5 lbs
37.4 lbs
A
2.75"
5.90"
B
4.29"
9.37"
12/8/03
7:01 PM
Page 1
PERMANENT MAGNET CHUCKS
Permanent Magnetic
Chucks
Series 986
Swivel Rectangular Type Chucks
Jigs, molds and tools can be located at any angle, for
forming or grinding operations, using the swiveling magnetic chuck. Installation is simple since no electrical
power is required, which eliminates the possibility of loss
of accuracy due to increase in temperature.
986-221
E
Specifications
Permanent Magnetic Chucks

Swiveling Rectangular Type
Order No.
Mass
986-221
22.0 lbs
Dimensions
A
B
2.75"
3.15"
C
.39"
D
2.75"
E
5.11"
F
10.70"
Graduated 90-0-90
One graduation: 1
C
D
Detachable hands setting

knotched hole
Round Type Pitchless Chucks

Fine pole spacing recommends pitchless chucks for
small and/or thin materials.
Specifications
Permanent Magnetic Chucks
Round type pitchless
Order No.
Mass
986-242
986-243
19.8 lbs
28.6 lbs
Dimensions
A
B
6.30"
5.51"
7.87"
7.08"
C
6.0mm
8.0mm
D
.39"
.55"
E
2.60"
2.60"
986-242
Round Type Chucks

Ideal for grinding and cutting operations on small and/or
thin workpieces on rotary grinders, lathes, rotary milling
machines and other machine tools.
Specifications
Permanent Magnetic ChucksRound type
Order No.
Mass
986-231
986-232
986-233
8.8 lbs
19.8 lbs
28.6 lbs
Dimensions
A
B
4.92"
4.41"
6.30"
5.51"
7.87"
7.08"
C
6.0mm
6.0mm
8.0mm
D
.39"
.39"
.55"
E
2.60"
2.60"
2.60"
986-233
A
C
B
S-27
12/8/03
7:02 PM
Page 1
SPRING CALIPERS/SMALL HOLE GAGES
Spring Dividers,
Outside Spring Calipers,
Inside Spring Calipers
950-231
950-211
Series 950
Specifications
Inside, Outside Spring Calipers, Spring
Dividers
Order No.
950-211
950-212
950-213
950-214
950-215
950-221
950-222
950-223
950-224
950-225
950-231
950-232
950-233
950-234
950-235
950-241
950-242
Range
4"
6"
8"
10"
12"
4"
6"
8"
10"
12"
4"
6"
8"
10"
12"
4"
6"
Remarks
Spring Dividers
950-221
Outside Spring Calipers
Inside Spring Calipers
950-241
Hermaphrodite Caliper
Small Hole Gages

Series 154
154-901
Features
Extra long for gaging deep and shallow holes, slots
and similar work.
Gaging surface is full-round with a flat bottom.
Gaging surface is fully hardened to ensure long tool life.
Supplied set of 4 gages in a fitted case.
Specifications
Small Hole Gages
Order No.
154-105
154-106
154-107
154-108
154-901
S-28
Range
.118.197"
.197.295"
.295.393"
.393.511"
.118.511"
Dimensions
B
C
.88" 3.54"
1.18" 3.84"
1.37" 4.04"
1.57" 4.25"
D
Remarks
.21"
.21"
.33"
.33"
Set of 4 Gages
2.64
C
12/8/03
7:05 PM
Page 1
TAP WRENCH & PARALLEL CLAMP
Telescoping Gages
155-903
Series 155 (5/16"~6")

Specifications
Telescoping Gages
Order No.
155-121
155-122
155-123
155-124
155-125
155-126
155-903
155-904
155-907
Range
.315.50"
.50.748"
.7481.26"
1.262.126"
2.1263.54"
3.545.90"
.3155.90"
.505.90"
.3152.126"
Dimensions
A
B
.12" .16"
.14" .20"
.14" .20"
.23" .29"
.23" .29"
.23" .29"
C
4.33"
4.33"
4.33"
5.90"
5.90"
5.90"
D
.20"
.22"
.22"
.31"
.31"
.31"
Remarks
A
D
Set of 6 Gages
Set of 5 Gages
Set of 4 Gages
B
C
Tap Wrench
T-Handle
MITUTOYO Tap Wrenches, for small, finishing work, have
ratchet action to left or right and may also be locked.
Chuck is hardened for resistance to abuse and for longlasting service.
Specifications
Tap Wrench (T-Handle)
Order No.
985-121
985-122
Clamping Capacity
.118"-.315"
.315"-.551"
Remarks
with Ratchet
with Ratchet
985-122
985-121
Parallel Clamps
Features
985-128
Material: hardened steel.

Black-oxide finish.
Specifications
W
L(max.)
S
Parallel Clamps
985-126
985-127
985-128
985-129
H
1.96"
2.95"
3.93"
4.92"
Dimensions
L (Max)
W
1.18"
.39"
2.36"
.47"
2.75"
.55"
3.15"
.63"
S
.39"
.47"
.55"
.63"
985-127
H
Order No.
S-29
12/16/03
10:55 AM
Page 1
SCRIBERS/CENTER PUNCHES/DRIVE PIN PUNCHES
Scribers
Series 985
985-111
MITUTOYO provides a full line of scribers to accommodate

every shop need. All the scribers, with the exception of the
985-105, have tungsten-carbide tips. The 985-105 has a
diamond tip.
985-105
985-103
Specifications
Scribers
Order No.
985-101
985-102
985-103
985-104
985-105
985-111
*Retractable
985-104
Length
6.75"
6.12"
8.87"
5.75"
5.12"
5.62"
Replacement Point
No. 050561
No. 050562*
No. 050563*
No. 050564
985-102
985-101
Center Punches
Series 985
985-114
Specifications
Center Punches
Order No.
Length
Replacement Point
985-112
5.25"
No. 050565
985-113
6.0"
No. 050566
985-114
985-115
985-116
985-117
3.0"
4.0"
4.3"
5.0"
Remarks
.68" (DIA),
Plastic housing
1.0" (DIA),
Metal housing
.31" (DIA)
.39" (DIA)
.59" (DIA)
.67" (DIA)
985-112
985-113
Drive Pin Punches

Series 985
Specifications
Drive Pin Punches
Order No.
Length
985-118
8"
985-119
4"
985-120
4"
S-30
Remarks
5pcs. Extra long Drive Pin Punch Set
1/8, 3/16, 1/4, 5/16, 3/8"
8pcs. Drive Pin Punch Set
1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16"
8pcs. Brass Drive Pin Punch Set
1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16"
985-119
12/8/03
6:48 PM
Page 1
EDGE & CENTER FINDERS / SURFACE GAGE
Edge & Center Finders

The Edge and Center Finders are hardened and ground
on all surfaces.
050101
050102
Specifications
Edge & Center Finders
Order No.
Shank (DIA)
Tip (DIA)
Remarks
050101
3/8"
(.375")
.20"
Edge Type
050102
1/2"
(.50")
.20"
Edge Type
050103
3/8"
(.375")
.20"
Center Type
050104
1/2"
(.50")
.20"
Center Type
050105
.375"/10mm
10mm
Edge Type
050106
10mm
10mm
Edge Type
050109
1/2"
(.50")
.50"
Edge Type
050110
1/2"
(.50")
.20", .50"
Double Edge Finder
050103
050104
050105
050106
Surface Gage
Series 156
This Surface Gage has a coarse-adjusting clamp for upright post,
fine-adjusting knob and baked-enamel-finished, hardened-steel base.
The two gage pins provided are held tightly against the base.
The rocker runs the entire length of the base and pivots against a
heavy spring, allowing a wide range of fine adjustment, yet holding
the tip of the scriber firmly.
Use of a test indicator along with this Surface Gage is recommended.
In addition to the above stems for test indicators, the
156-502 Surface Gage accepts 3/8", 5/32" (9.5mm, 4mm) stems.
Stem 102036
.156"
156-502
Stem 190318 and Nut 190322
Features
Stems for test indicators

(optional)
.156"
Bottom surface, Vee and parallel side edges are ground.

A pair of gage pins for linear work.
Fine adjusting knob.
Suitable as a small transfer stand with MITUTOYO test indicator.
Specifications
Surface Gage
Order
Dimension
No.
of Scriber
156-502 Length: 6.9"
(DIA): .157"
(4mm)
Remarks
Base Dimension:
3.4"(W) x 2.4"(D) x 1.3"(H)
Post Dimension:
Length: 10.2", .44" (DIA)
S-31
12/8/03
6:50 PM
Page 1
MAGNETIC LAMPS/ZERO-IT, SETTERS

986-281
Magnetic Lamps
(without bulb)
Series 986
Concentrate light on the workpiece from any location

and/or direction with MITUTOYO Magnetic Lamps. Two
incandescent lamps and one fluorescent lamp have flexible supports mounted onto powerful magnetic bases. The
bases have a V-groove and adhere to curved as well as
flat surfaces. An on/off switch, for the magnetism of the
bases facilitates positioning and releasing of lamps.
986-282
(without bulb)
Permanent
Magnet
Specifications
Magnetic Lamps
Order No.
986-281
986-282
Lamp
60W incandescent
60W incandescent
Height
18"
15.75"
Pull
165.3 lbs
165.3 lbs
On-Off
Switchable
Magnet
Remarks
without bulb
without bulb
ZERO-IT 950-110
Zero-It is specially designed for MITUTOYO Test Indicators with
Dovetails, and functions as a quick and practical work positioning
device.
Attach Zero-It directly to the collet, then zero-in the work position by
reading MITUTOYO Test Indicator. The hardened clamping post consists of three ODs, from top, 1/4", 3/8" and 1/2", and has hardness of
approximately 58 to 60 Rockwell C.
950-110
TEST INDICATOR
(Not supplied)
Specifications
Zero-It
Order No.
950-110
Coarse
10"
Fine
3/8"
WORK
ZERO IT
ZERO-SETTER
Series 950
Fast and sure establishment of 0 reference point with
built-in indicator.
Spring loaded setting face to safe guard against damage
from over run.
Body dia. 1.44" (36.5mm)
Wooden case included.
950-112
Specifications
Zero-It
Order No.
950-111
950-112
S-32
Height
1"
25mm
Graduation
.0005"
0.01mm
950-111
12/8/03
6:52 PM
Page 1
ANGLE BLOCKS/ADJUSTABLE PARALLELS
Angle Blocks
Series 981
Specifications
Angle Blocks
Order No.
010001
010002
010003
010004
010005
010006
010007
010008
010009
010010
010011
010012
010013
010014
Angle
Accuracy
Remarks
1/4
1/2
1
2
3
4
20 sec
5
10
15
20
25
30
45, 45, 90
40 sec
30, 60, 90
Set Order No.

981-101
981-102
981-103
981-102
Hardened steel over
HRC 55
Precision ground
throughout
Remarks
10 pc. Set (Order No. 010003-010012)
12 pc. Set (Order No. 010001-010012)
2 pc. Set (Order No. 010013-010014)
010012
010011
010010
010009
010008
010007
010006
010005
010004
010013
010003
010002
010001
010014
2 pc. Set 981-103
Adjustable Parallels
Series 985
Consists of two precision ground pieces which slide
smoothly on each other.
Locked into position by set screws.
Order No. Remarks
985-130
4 pcs. Adjustable Parallel Set 3/8 1-15/16"
985-131
6 pcs. Adjustable Parallel Set 3/8 2-1/4"
985-132
Size A Adjustable Parallel 3/8 1/2"
985-133
985-134
985-135
Size A Adjustable Parallel 15/16 1-5/16"
985-136
Size A Adjustable Parallel 1-5/16 1-3/4"
985-137
Size A Adjustable Parallel 1-3/4 2-1/4"
Can be quickly inserted into openings and expanded to

exact size, then measured with a micrometer.
985-131
S-33
12/8/03
6:54 PM
Page 1
MU-GAGE PLUS
MU-Gage Plus
Series 179
Ultrasonic micrometer with SPC output
The MU-Gage Plus is high resolution ultrasonic micrometer with
the following features.
Features
1. Lemo quick-disconnect transducer connector.
2. PRB carat lights when unit in probe selection mode.
3. DIF carat lights when unit in differential offset measurement
mode.
4. LT carat lights when display backlight control mode is
enabled.
5. HI/LO carat lights when unit in the HI/LO tolerance
limits/alarm set-up mode.
6. Backlit display
7. Activates scrolling keys to set values in THK, VEL, DIF,
HI/LO, PRB, and LT control options.
8. Scrolling keys.
9. Selects operating mode, THK, VEL, DIF, HI/LO, PRB, and
LT across top of display window.
10. SPC output port.
11. Built-in calibration block for transducer recognition.
12. Power on/off switch.
13. Clears displays and erases/resets.
14. Sends data in memory to compatible computer or
printer.
15. Low Battery indicator.
16. Indicates displayed value outside tolerance limit.
17. Over range indicator, exceeding available digits.
18. THK carat lights when unit in normal thickness
measurement mode.
19. VEL carat lights when unit in material velocity mode.
19
18
17
16
15
14
1
2
3
4
5
6
7
8
13
12
11
Specifications
MU-Gage Plus
Order No.
Transducer
Measuring Range
Resolution
Accuracy
Battery
Dimension
Operating Temp
Mass
Material Type
S-34
179-207
179-208
Thin Metal
Thin Plastics
.0101.000"
.005.200"
0.2525mm
0.135mm
.0001"/0.001mm
.0001/0.001mm
.002"
.0015"
4 pcs. AA Alkaline
W=3.5" x H=6.25" x D=1.5"
(89mm x 159mm x 38mm)
+10F to 120F (-10C to 50C)
.91lbs. (410g)
Thin Metal
Plastic
10
Order No.
Description
64AAA510 Transducer probe for 179-207 (cable length 4 ft.)
64AAA504 Couplant Bottle (4 0z.)
64AAA512 Screw Driver
64AAA513 Plastic Case
Order No.
Description
64AAA514 Replacement for Probe Tip
64AAA515 Replacement Cable for Transducer
64AAA516 Soft case w/strap
936937
SPC Output connecting cable (1m)
965014
SPC Output connecting cable (2m)
12/8/03
6:57 PM
Page 1
MU-GAGES
MU-Gage
Series 179
Ultrasonic micrometer with SPC output
The MU-Gage is an ultrasonic instrument for precise thickness
measurement from just one side of a workpiece.
Features
1. Lemo quick-disconnect transducer connector.
2. Battery charger connect/data port
3. Built-in auto-probe zero block
4. Coupling indicator
5. Backlit LCD indicates modes, measurements and icons
6. Lightweight aluminum case
7. Weather resistant sealed keypad
8. POWER key
9. ALRM key enables alarm LEDs
10. SEND key for transmission of readings
11. Numeric keys
12. Material calibration key
13. SCAN key enables rapid scanning and minimum thickness
capture
14. DIFF key enables display of positive or negative difference
to preset value
15. Red and green LED indicators
16. Operator selectable Metric or English units
1
2
3
Specifications
16
MU-Gage Plus
Order No.
Transducer
Measuring Range
179-204
Standards
.0405.000"
1mm125mm
179-205
179-206
Aluminum
High Resolution
.0404.000"
.0405.000"
1mm102mm
1mm125mm
Resolution
.001"/0.01mm
Accuracy
.002"
Battery
4 pcs. AA Alkaline 300 Hours (80 Hours with backlight)
Dimension
W=2.5" x H=4.5" x D=1.25" (64mm x 114mm x 33mm)
Operating Temp
-18C to 150C (0F to 300C)
Mass
.69lbs. (312g)
Material Type
Glass, Plastic,
Aluminum
Glass, Plastic,
Steel, Ceramics
Steel, Ceramics
Transducer probe has 25% higher sensitivity to small holes pitting than
standard type.
Order No.
Description
64AAA504 Couplant Bottle (4 0z.)
64AAA513 Plastic Case
15
14
13
4
5
6
7
8
9
10
12
11
Order No.
Description
64AAA505 Steel Calibration Block (5 Step)
64AAA506 Aluminum Calibration Block (5 Step)
64AAA507 Instrument Case with Strap
64AAA508 V-Block Transducer Holder
64AAA509 SPC Output Connecting Cable (3 ft.)
S-35
12/8/03
6:59 PM
Page 1
ROLL CALIPERS /DIGI-DERM
Roll Calipers
Series 310
The Roll Caliper, as its name implies, is a special gage to measure
rolled or turned products, such as: metal sheets; textile; rubber or
paper rolls; large and cylindrical workpieces; extruded tubes; welded
tubes; etc.
The Roll Caliper is supplied without Gage Head. Select MITUTOYO
Dial Indicator or Mu-Checker with Cartridge Head and order together
with the Roll Caliper.
Order No.
310-141
310-142
310-143
310-144
310-145
Supplied without Gage

Head. Select Dial Indicator
or Mu-Checker with
Cartridge Head.
Inch Range
2056"
1642"
1132"
824"
417"
Digi-Derm
Series 179
Digi-Derm is a non-destructive, electronic coating thickness gage. Readings are displayed on the clear LCD
screen and can be sent to any Mitutoyo SPC system for
data analysis. Digi-Derm is battery powered for portable
use and can also operate on AC power with an optional
adaptor.
179-746
Specifications
Digi-Derm
Inch/Metric
Order No.
Measuring
Range
LCD
Resolution
Accuracy
.00008" 1 digit (Range: 0.0039")
.00005"
0.059"
2% 1 digit (Range: .004".043")
179-746
(0.001mm)
(01.5mm)
3% 1 digit (Range: .043".06")
0.039"
.00005"
.00008" 1 digit (Range: 0.0039")
179-756
(01.0mm)
(0.001mm)
2% 1 digit (Range: .0039".043")
For SPC output order connecting cable 936937 (1m) or 965014 (2m).
Remarks
Non-magnetic coating on
magnetic material
Non-conductive coating on
non-magnetic material
Replacement Part (Calibration Film for 179 series)

Order No.
179-710
179-711
179-731-1
179-712
179-746
179-756
S-36
Film
527599
Set No. (25m)
937287
937288
937288
937289
945014
945049
527600 527601
(50m) (100m)
527602
(250m)
527603
(500m)
527604
(1000m)
Replacement Part (Base metal)

685013
(1500m)
527605
(2000m)
Order No.
933038
937305
Can be used for

coating thickness gages
179-710
179-711
179-712
179-746
179-731-1
179-756
12/8/03
7:01 PM
Page 1
BENCH COMPARATOR
Bench Comparator
Series162
Features
Overall range 0100mm, for OD measurements.
Variable anvil pressures.
Dial Indicator is shockproof.
Adjustable work-table size: 1-9/16 x 2-3/4".
Vertical adjustment: 1-9/16".
MITUTOYO Gage Blocks are furnished with the
Bench Comparator.
Inch type: 1", 2"
Metric type: 25mm, 50mm
Supplied with case.
Weight: 33 lbs.
Mu-Checker: 519-402A
Cartridge Head: 519-332, 334
Bench Comparator: 162-102
Specifications
Inch/Metric
Overall
Micrometer Micrometer Dial Indicator
Accuracy
Order No. Range
Head Range Head Grad. Grad.
Micro-Head Indicator
0100mm 025mm
0.001mm
0.001mm (0-50-0) 2m
162-101
within 1/3
graduations
162-102
04"
01"
.0001"
.0001" (0-5-0)
.0001"
Variable
Attachment
Pressure
Diameter
200, 400, 100 gf 8mm
0.5, 1, 1.5, 2,
3/8"
2.5, 3 lbs.
Bench Centers Series 967

Precision Concentricity Verification
967-201
Horizontal position
D
C
B
A
069303
Light-weight Type
Dimensions
Order No.
967-101
967-203
967-201
967-204
967-202
A
25.59"
12.2"
19.69"
27.56"
35.44"
B
2.36"
1.58"
1.78"
3.15"
3.94"
C
3.54"
1.96"
2.95"
3.93"
4.92"
D
9.05"
5.29"
7.65"
7.65"
9.05"
Supplied without Test Indicators
Weight
88 lbs.
15.4 lbs.
28.6 lbs.
132 lbs.
154 lbs.
Vertical position
(967-201 and 967-203 only)
Specifications
Order No.
967-101
967-203
967-201
967-204
967-202
Center-to-Center
13.7"
5.9"
11.8"
17.7"
23.6"
Workpiece Capacity
Diameter
7"
3.8"
5.8"
7.8"
9.8"
Max. Weight
88 lbs.
17.5 lbs.
35 lbs.
44 lbs.
66 lbs.
Parallelism
of Centers
.0002"
.0002"
.0002"
.0002"
.00024"
Flatness
of Surface
.0003"
.0004"
.0006"
.0007"
.0008"
Attachment
Diameter
3/8"
3/8"
3/8"
3/8"
3/8"
069303
069304
Special attachment for mounting 967-201 in vertical position

Special attachment for mounting 967-203 in vertical position
S-37
12/8/03
7:03 PM
Page 1
HAND TACHOMETERS
Digital Hand Tachometers

Series 982
982-551
982-552
Specifications
Order No.
Revolution per minute
Rotation speed
Measuring accuracy
Revolution
Surface, Speed, Length
Detection
Outside dimensions
Weight
982-551
1.0 25,000 rpm
982-552
Non-contact: 6.0 99,999 rpm;

Contact: 6.0 25,000 rpm
1.0 599.9rpm: 1rpm, 600.0 25,000 rpm:

0.006% and 0.5 digit
0.4% and 1 digit
Optical coupler, 20 pulses per revolution
4.83" L x 2.52" W x 1.24" H
(1.22.5mm x 64mm x 31.5mm)
0.37 lbs. with batteries (170 g)
6.0 599.9 rpm: 1rpm, 600.0 99,999 rpm

0.006% and 0.5 digit
0.4% and 1 digit
Laser diode
4.55" L x 2.52" W x 1.24" H
Overall length with contact adapter: 149mm
Main unit: 0.35 lbs. with batteries (160 g)
contact adapter: 0.11 lbs. (50 g)
Specifications
For Digital Hand Tachometers, SERIES 982
Order No.
010049
010050
010051
Description
Cone Adapter, Standard
Cone Adapter, 5/8"
Cone Adapter, 3/4"
Dimension
D = 1/2"
D = 5/8"
D = 3/4"
010052
Cone Adapter, 11/4"
D = 11/4"
d = 1/2"
010053
010054
010055
010056
010057
010058
Funnel Adapter, Standard

Funnel Adapter, 3/4"
Measuring Wheel FPM (6" cir)
Measuring Wheel FPM (12" cir)
Measuring Wheel YPM (0.1 yard cir)
Measuring Wheel MPM (0.1 meter cir)
D
D
D
D
D
D
010059
Reflective Tabs 1/2" square (35 pcs)
010060
Extension Shaft (3" length)
S-38
=
=
=
=
=
=
1/2"
3/4"
1.91"
3.82"
1.15"
1.25"
Drawing
12/8/03
7:06 PM
Page 1
TORQUE WRENCHES
Datatorq
Series 983 Digital Torque Wrenches with SPC output
983-213
983-210
Features
Programmable torque tolerance
(high/low limits)
Peak Hold mode
Track mode
Red and Green Go/No Go lights
Analog auto scaling bar-graph
display
Audible buzzer
Memory for up to 4000 torque

data
Batteries:
A 9V alkaline battery
Battery life 60 hours of operation
A "Lo Bat" indication on display
signals for replacement.
All calibration data is stored in the
microprocessor.
Accuracy
1% from 20-100% of range
1%, Plus 5 increments, from
10-20% of range
A Certificate of Accuracy, traceable to the NIST, is furnished with
each Datatorq.
Specifications
Datatorq
Order No.
983-210
983-211
983-212
983-213
983-214
983-215
Range
5-50 in.lb
5.6-56 dNm
5.7-57 cmkg
80-800 in. oz.
25-250 in. lb
28-282 dNm
29-288 cmkg
5-50 ft. lb.
68-677 dNm
69-691 cmkg
60-600 in. lb.
25-250 ft. lb.
34-338 Nm
3.4-34 mkg
60-600 ft. lb.
81-813 Nm
8.3-83 mkg
100-1000 ft. lb.
135-1355 Nm
14-138 mkg
Increments
.01 in. lb.
.01 dNm
.01cmkg
.1 in. oz.
.1 in. lb.
.1 dNm
.1 cmkg
.01 ft. lb.
.1 dNm
.1 cmkg
.1 in. lb.
.1 ft. lb.
.1 Nm
.01 mkg
.1ft. lb.
.1 Nm
.01 mkg
1 ft. lb.
1 Nm
1 mkg
Drive
Length
Mass
1/4"
13.5"
1.5 lb
3/8"
14.9"
2.0 lb.
3/8"
14.9"
2.0 lb.
1/2"
21.5"
3.2 lb.
3/4"
46.5"
9.5 lb.
1"
74.0"
19.0 lb.
Optional Accessories: SPC cable No. 50AAA620
S-39
12/8/03
6:46 PM
Page 1
ACCESSORIES
Miscellaneous Mitutoyo Products

& Accessories
Ball Attachment
101468 .200" DIA. hardened steel ball
101469 .250" DIA. Micrometer Anvil to
measure concave surface or cylindrical
wall thickness.
NOTE: See additional information on
micrometer anvil attachments at the
end of the micrometer section in this
catalog.
Tie Clips
101420
10142001
10142002
10142003
10142004
10142005
10142006
Micrometer (gold-color)
Dial Caliper (silver-color)
Digimatic Micrometer (silver-color)
Dial Indicator (silver-color)
Digimatic Caliper
(silver-color)
CMM (silver-color)
Digimatic Indicator (silver-color)
PARTS LIST ON CD-ROM

This single CD-ROM provides over 6,500 parts schematic
breakdowns on Mitutoyo products. Multiple search methods are
allowed including: Product/Tool Number, Product Description,
Product Series, Part Numbers and Part Descriptions. Each screen
displays a complete, exploded-view parts drawing with call-outs
corresponding to the exact parts order number and list price. Other
valuable features include a zoom function with the ability to scroll
on the drawing or list, option for a full screen image and printing a
complete page with all parts information for any one product.
Request through your Mitutoyo distributor Part No. 050017CD.
2-4
1
0.25in
PRICE LIST
For Replacement Parts and Accessories
MITUTOYO Tools & Instruments
This Price List supplements the Parts CD by providing the price
information on all the parts and accessories of MITUTOYOs regular line of instruments. Each part is identified by a Code Number
(listed numerically for easy location) and an accompanying
description. Copies of the Price List are available upon request.
S-40
0.001 mm
2-3
2-1
2-2
2
5
10-3
10-1
10-2
10
11
8
6

Miscellaneous Miscellaneous: Mitutoyo

Uploaded by

Copyright:

Available Formats

Miscellaneous Miscellaneous: Mitutoyo

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Miscellaneous Miscellaneous: Mitutoyo

Uploaded by

Copyright:

Available Formats

Precision Measuring Equipment and Industrial Supplies since 1924.

S-02 (2003) full size

Comparator (8X) and reticle sets

S-03 (2003) full size

Full 360 range (90 x 4).

0.1Level 10, Plumb 10

S-04 (2003) full size

S-05 (2003) full size

Digimatic Universal Protractor

Digimatic Universal Protractor with output function.

S-06 (2003) full size

Universal Bevel Protractor

Universal Bevel Protractor

S-07 (2003) full size

(Not available in Canada.)

(Not available in Canada.)

Frame Winder Tapes

S-08 (2003) full size

Digital Tape Measure

Mitutoyo's new Digital Tape Measure is a fast and

S-09 (2003) full size

Each radius gage has five measuring locations.

S-10 (2003) full size

5 concave and convex radii per each leaf.

S-11 (2003) full size

Manufactured from stainless steel, satin finished.

Individual Part No.

Angles 1, 2, 3, 4 are primary

Gaging of angles of adjoining

Gaging of the countersink

Gaging of primary and complementary angles from a

S-12 (2003) full size

Depth Gage, Adjustable Angle

Head made of hardened steel.

Whitworth Screw Pitch Gages (55)

4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2,

4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 12, 13, 14,

S-13 (2003) full size

.004 thru .025" by .001" step

.002, .003, .004, .005, .006 ,.008, .010, .012, .013,

0.03 thru 0.1mm by 0.01mm step

S-14 (2003) full size

Tap and Drill Gage

Tap and Drill Gage

Drill Point Gage

S-15 (2003) full size

EDGES & SQUARES

The test edge is approximately .004" in thickness, a

Beveled Edge Squares with Beam

S-16 (2003) full size

COMBINATION SQUARE SETS

Combination Square Sets

Set No. 180-905

Inch (Cast Iron-Not Hardened)

Set No. 180-901

S-17 (2003) full size

S-18 (2003) full size

S-19 (2003) full size

Engraved on frontside only.