JITAI910 Digital Ultrasonic Flaw Detector: Beijing Jitai Tech Detection Device Co.,Ltd

Beijing
Jitai Tech Detection Device Co.,Ltd
JITAI910 Digital Ultrasonic Flaw Detector
I.Introduction
Digital ultrasonic flaw detector is advanced type,, can quickly, easily and without damage, accurately
detect, locate, evaluate and diagnose various defects inside the work-piece such as cracks, welds,
pores, sand holes, inclusions, folding, etc. It has been applied for electric power, petrochemical, boiler
and pressure vessel, steel structure, military, aerospace, railway transportation, automobile,
machinery and other fields. It is an essential instrument for the non-destructive testing industry.
II.Features
 Measurement display mode: positive wave,negative wave,full wave and wave ;

 It has a linear suppression function, the maximum inhibition is 80% of the screen height;
 It can switch between single crystal probe, double crystal probe and two inspection modes;
 It has a gate setting and alarm function. The position and width of the gate can be arbitrarily
set on the screen, and an incoming wave alarm can be set;
 500 independent detection channels, each channel set a separate set of testing parameters,
DAC curve;
 Two display modes with angle and K value;
TEL：4008886878 EMAIL：kathy@jitaikeyi.com
ADD：Room 716,2 Unit, Yuexiu Rd 99, Haidian District, Beijing,100096 China WEB：http://www.jitaikeyi.com
Beijing Jitai Tech Detection Device Co.,Ltd
 The DAC curve is generated automatically, and up to 10 points can be recorded, with four
additional adjustable offset curves;
 AVG curve is generated automatically, and two types of defects can be customized;
 Automatic probe calibration function;
 With storage function, it can store 100 A sweep patterns, parameters and DAC curve;
 Has a storage graphics playback function, the stored A-scan graphics from the storage area
and displayed on the screen;
 Has a delete function to delete the specified content (represented by the storage group
number) from the storage area;
 Peak memory function;
 Freeze and thaw functions with waveform and inspection parameters;
 With sound path measurement and echo frequency analysis function;
 Real-time power status indication function;
 Support USB communication interface;
 Li-battery, low power consumption, can continuous working more than ten hours
 Can set up buzzer alarm during operation
 Light, convenient, easy to operate
III.Technical Specification
Name Technical data
Scan range (mm):0~10000
Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250,
300, 350, 400,
Scan range (mm)
450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,700
0,8000,9000, 10000.
Adjusting step distance: 1mm
Pulse shift ( s ): -7to +9984
Grades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350,
Pulse shift ( s ) 400, 450, 500, 600,
700,800,900,1000,1500,2000,2500,3000,3400.
Adjustment step:1（-7s~9984s）
Probe zero point：0.0~99.99
Probe zero point(s)
Adjust the step：0.01
Material sound speed:1000~15000
Material sound speed(m/s) 7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300
Adjust the step:1
Single probe (receive and send), dual probes (one for receiving
Working methods
one for sending)
Frequency Range(MHz) 0.5~20
Beijing Jitai Tech Detection Device Co.,Ltd
0~120
Gain adjustment(dB)
Adjust the step:0.2,1,2,4,6,8,10,20,50
Linear inhibition Screen height 0% to 80%, step size: 1%
Vertical linearity error Vertical linear error, not more than 3%
Horizontal linear error Within the scan range, not more than 0.2%
Flaw detection sensitivity margin 62dB
Dynamic Range 32dB
Alarm Incoming wave alarm
Display:
Display screen
High-brightness color 5.7 in display
Full screen or local
A-Scan display area
A-Scan shows freeze and thaw A-Scan fills
Flaw detection channel 300
Data storage 500 A-Scan graphics
PC communication interface
USB
standard
Units of measurement Mm
enter 100V~240V/50Hz~60Hz
Power Adapter
Output 9V/1.5A
Battery Lithium (Li) Battery 5000mAh
Working temperature (°C) -10~50°C
Working humidity (RH) Name20%~90% QTY
Interface 1Type Main unit
BNC 1
2 (mm)Straight probe 20mm
Dimensions 2.5MHz
220*140*50 1
3
Weight(kg) Straight probe 30mm
1.0 1MHz 1
4 Angle probe 13x13 K2 2.5MHz 1
5 probe connecting cable 2
6 Power adaptor 1 IV.Standard
7 Warranty card 1
8
9
Product Certificate
Instruction manual
1
1
Configuration
10 Software 1
11 Instrument case 1

JITAI910 Digital Ultrasonic Flaw Detector: Beijing Jitai Tech Detection Device Co.,Ltd

Uploaded by

Copyright:

Available Formats

JITAI910 Digital Ultrasonic Flaw Detector: Beijing Jitai Tech Detection Device Co.,Ltd

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JITAI910 Digital Ultrasonic Flaw Detector: Beijing Jitai Tech Detection Device Co.,Ltd

Uploaded by

Copyright:

Available Formats

Beijing

JITAI910 Digital Ultrasonic Flaw Detector

 Measurement display mode: positive wave,negative wave,full wave and wave ;

You might also like