Pyrocouple Data Sheet
Pyrocouple Data Sheet
Pyrocouple Data Sheet
The PyroCouple is a simple infrared temperature sensor with a choice of analogue SPECIFICATIONS
outputs. No complicated setup is required - just connect a temperature indicator and
power supply, and instantly start taking measurements. General
It is suitable for non-contact temperature measurement on most non-reflective Output Choice of 4-20 mA,
non-metal surfaces, such as paper, thick plastics, asphalt, painted surfaces, food, J or K Thermocouple, mV
rubber and organic materials, among many others. (See “Model Numbers”)
Temperature Range LT = -20 to +100 °C
MT = 0 to 250 °C
HT = 0 to 500 °C
OPTICS Accuracy ±1% of reading or ±1°C,
whichever is greater
Repeatability ± 0.5% of reading or
Distance: Sensor to object (inches) Distance: Sensor to object (inches) ± 0.5°C, whichever is
0 4 8 0 19.7 39.4 greater
Spot Dia.
Spot Dia.
(inches)
(inches)
4.4
2.4 3.1 Emissivity Setting Fixed at 0.95
0.5 1.8
0.5
Response Time 240 ms (90% response)
D:S 2:1 D:S 15:1
11.9 11.9 Spectral Range 8 to 14 μm
Spot Dia.
Spot Dia.
45.2
(mm)
(mm)
Spot Dia.
(inches)
Mechanical
1.1 1.8
0.5 0.5 0.20 0.71 Construction Stainless Steel
Spot Dia.
28.6
(mm)
45.2
(mm)
Environmental
All models can measure at longer distances than shown, with a larger
measured spot size. Environmental (IP) Rating IP65
4
1m 12 18
Standard length
Longer cable available
(30 m max) 103
CONNECTIONS
Two-wire (option 0) Four-wire (options 1 to 4)
Display/Controller Display/Controller
Power Supply
PWR+ + - OP-
- -
PWR- OP+ +
+
4-20mA
4-20mA = Target mV / Thermocouple = Target
Temperature Temperature
Power
Supply Display/Controller
PWR+ + -
-
PWR-
+
4-20mA
4-20mA = Sensor
Temperature
Optional
Cable Length
(blank) Standard 1 metre cable length
nM Extended cable, length n metres (30 m max)
User may extend cable further Laser sighting tool LSTS Dual laser sighting
bracket, adjustable
Cooling DLSBAS or fixed DLSBFS
(blank) Sensor without cooling
WJ Air/water cooled jacket with air purge collar
Output option
-0 2 wire 4-20mA
-1 4-wire 0-50mV (target temperature)
4-20mA (sensor temperature)
-3 4-wire J Thermocouple (target temperature)
4-20mA (sensor temperature)
-4 4-wire K Thermocouple (target temperature)
4-20mA (sensor temperature)
Fixed mounting bracket Adjustable mounting
e.g. Model PC151HT-4 has a type K thermocouple output FBS bracket ABS
representing target temperatures of 0ºC to 500ºC plus a 4-20
mA output proportional to internal sensor temperature. For
simplicity, the sensor temperature range is always set the
same as the target temperature range
Temperature range
LT -20ºC to +100 ºC
MT 0ºC to 250 ºC
HT 0ºC to 500 ºC
Field of view
21 2:1 divergent optics
151 15:1 divergent optics Air or water cooled jacket Air purge collar for 2:1
301 30:1 divergent optics with air purge collar WJ optics APSW
CF Close-focus optics (factory-fitted - see Model
(focal spot size 5 mm at 100 mm distance) Numbers) or for all other optics
(shown above) APSN
Series
PC PyroCouple Simple infrared temperature sensor for general purpose
applications. Fixed emissivity 0.95, choice of analogue outputs