Company name:

Created by:
Phone:

Date: 23/08/2023
Qty. Description
1 SP 9-25

Note! Product picture may differ from actual product

Product No.: 98699061

Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 5.5 kW MS4000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a
MP204 control panel, enables temperature monitoring.
The motor is for direct-on-line starting (DOL).

Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 2900 rpm
Rated flow: 9 m³/h
Rated head: 132.1 m
Shaft seal for motor: HM/CER
Approvals: CE,EAC,UKCA,SEPRO,MOROCCO
Approvals for drinking water: ACS,DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES

Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

Installation:
Maximum operating pressure: 60 bar
Maximum outlet pressure: 16.5 bar
Type of connection: Rp
Size of connection: 2 inch

Printed from Grundfos Product Centre [2023.33.003] 1/7

 Company name:
Created by:
Phone:

Date: 23/08/2023
Qty. Description
1 Motor diameter: 4 inch
Minimum borehole diameter: 105 mm

Electrical data:
Motor type: MS4000
Motor flange design: NEMA
Rated power - P2: 5.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 13.0-13.0-13.4 A
Starting current: 480-530-550 %
Cos phi - power factor: 0.85-0.81-0.76
Rated speed: 2850-2860-2870 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temp. transmitter: yes
Length of cable: 2.5 m
Power cable type: FLAT
Motor No: 79195511
Windings: Enamelled

Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 45.4 kg
Gross weight: 79.6 kg
Shipping volume: 0.264 m³
Danish VVS No.: 388480025
Finnish LVI No.: 4762698
Environmental approvals: WEEE

Printed from Grundfos Product Centre [2023.33.003] 2/7

 Company name:
Created by:
Phone:

Date: 23/08/2023
H SP 9-25, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: SP 9-25 160
Product No: 98699061
140
EAN number: 5712600106055
Technical: 120
Pump speed on which pump data are 2900 rpm
based: 100 100

Rated flow: 9 m³/h 80 80

Rated head: 132.1 m
Stages: 25 60 60

Number of reduced-diameter NONE 40 40

impellers:
Shaft seal for motor: HM/CER 20 20

Approvals: CE,EAC,UKCA,SEPRO,MOR
OCCO 0 0
0 1 2 3 4 5 6 7 8 9 10 Q [m³/h]
Approvals for drinking water: ACS,DM174 Pumped liquid = Water
Curve tolerance: ISO9906:2012 3B Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
Model: A P
Motor version: T40 [kW]

Return valve: YES P1

6
Materials:
Pump: Stainless steel 5
P2
Pump: EN 1.4301 4
Pump: AISI 304
3
Impeller: Stainless steel
Impeller: EN 1.4301 2
Impeller: AISI 304
1
Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301 0
95
677

Motor: AISI 304

2165

1488

GN 101

Rp2

Rp2
Installation: 101 GN
Maximum operating pressure: 60 bar
Maximum outlet pressure: 16.5 bar
Type of connection: Rp
Size of connection: 2 inch
Motor diameter: 4 inch
1488

Minimum borehole diameter: 105 mm

2165

Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Max liquid t at 0.15 m/sec: 40 °C
677

Selected liquid temperature: 20 °C

Density: 998.2 kg/m³
Electrical data: 95

Motor type: MS4000

Motor flange design: NEMA L1 L2 L3 PE

Rated power - P2: 5.5 kW

Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 13.0-13.0-13.4 A
Starting current: 480-530-550 %
Cos phi - power factor: 0.85-0.81-0.76
Rated speed: 2850-2860-2870 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68 U V W PE

Insulation class (IEC 85): F

Built-in motor protection: NONE
M
Thermal protec: external
Built-in temp. transmitter: yes
3

Printed from Grundfos Product Centre [2023.33.003] 3/7

 Company name:
Created by:
Phone:

Date: 23/08/2023

Description Value
Length of cable: 2.5 m
Power cable type: FLAT
Motor No: 79195511
Windings: Enamelled
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 45.4 kg
Gross weight: 79.6 kg
Shipping volume: 0.264 m³
Danish VVS No.: 388480025
Finnish LVI No.: 4762698
Environmental approvals: WEEE

Printed from Grundfos Product Centre [2023.33.003] 4/7

 Company name:
Created by:
Phone:

Date: 23/08/2023

98699061 SP 9-25 50 Hz
cos phi SP9-25 + MS4000 5.5 kW 3*400 V, 50 Hz I
eta [A]

cos phi

0.8 eta 16

0.6 12

0.4 8

0.2 4

0.0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 P2 [kW]

n P1
[rpm] [kW]
3000

n
2800 P1 8

2600 6

2400 4

2200 2

2000 0

Printed from Grundfos Product Centre [2023.33.003] 5/7

 Company name:
Created by:
Phone:

Date: 23/08/2023

98699061 SP 9-25 50 Hz

Rp2
101 GN
1488

2165
677

95

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2023.33.003] 6/7

 Company name:
Created by:
Phone:

Date: 23/08/2023

98699061 SP 9-25 50 Hz

L1 L2 L3 PE

U V W PE

M
3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2023.33.003] 7/7