Company name:

Created by:
Phone:

Date: 10/31/2024
Count Description
1 SP 18-16

Product photo could vary from the actual product

Product No.: 92952194
Multi-stage submersible pump for raw water supply,
groundwater lowering and pressure boosting. The
pump is suitable for pumping clean, thin, non-agressive
liquids without solid particles or fibers.

horizontal and vertical installation.

The pump is fitted with a built-in non-return valve.

The motor is a 3-phase motor of the canned

type with a sand shield, liquid-lubricated bearings
and pressure-equalizing diaphragm.

Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 17.01 m³/h
Rated flow: 18 m³/h
Resulting head of the pump: 128.1 m
Rated head: 122 m
Shaft seal for motor: CER/CARNBR
Approvals: CE,EAC,UKCA,SEPRO,MOROCCO
Approvals for drinking water: ACS,DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES

Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

Installation:
Maximum ambient pressure: 60 bar
Maximum operating pressure: 60 bar
Maximum outlet pressure: 17.7 bar
Type of connection: Rp
Size of connection: 2 1/2 inch
Motor diameter: 6 inch
Minimum borehole diameter: 150 mm
 Company name:
Created by:
Phone:

Date: 10/31/2024
Count Description
1 Electrical data:
Motor type: MS6000
Motor flange design: Grundfos
Rated power - P2: 9.2 kW
Power (P2) required by pump: 9.2 kW
Main frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 21.8-21.2-21.2 A
Starting current: 480-520-550 %
Cos phi - power factor: 0.84-0.82-0.78
Rated speed: 2850-2870-2880 rpm
Start. method: SD
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temperature transmitter: Y
Length of cable: 5m
Power cable type: FLAT
Motor Number: 78695513
Windings: Enamelled

Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 71.7 kg
Gross weight: 101 kg
Shipping volume: 0.232 m³
Environmental approvals: WEEE
 Company name:
Created by:
Phone:

Date: 10/31/2024
H SP 18-16, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: SP 18-16 180
Product No.: 92952194
160
EAN: 5715122072228
Technical: 140
Pump speed on which pump data are 2900 rpm
based: 120

Actual calculated flow: 17.01 m³/h

100 100
Rated flow: 18 m³/h
Resulting head of the pump: 128.1 m 80 80
Rated head: 122 m
60 60
Stages: 16
Number of reduced-diameter impellers: NONE 40 40
Shaft seal for motor: CER/CARNBR
20 20
Approvals: CE,EAC,UKCA,SEPRO,MOROCC
O 0 0
Approvals for drinking water: ACS,DM174 0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]

Curve tolerance: ISO9906:2012 3B Q = 17.01 m³/h H = 128.1 m

Es = 0.5527 kWh/m³ n = 2899 rpm
Model: A Pumped liquid = Water Density = 998.2 kg/m³
Motor version: T40 Eff pump = 77.4 % Eff pump+mtr = 63 %
Liquid temperature during operation = 20 °C
Return valve: YES P NPSH
Materials: [kW] [m]
P1
Pump: Stainless steel
Pump: EN 1.4301 8 20
P2
Pump: AISI 304
6 15
Impeller: Stainless steel
Impeller: EN 1.4301 4 10
Impeller: AISI 304
2 5
Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301 0 0
Motor: AISI 304 P1 = 9.399 kW
P2 = 7.656 kW
Installation: 139.5

NPSH = 4.18 m
607

Maximum ambient pressure: 60 bar

1856

1249

GN
144

RP2 1/2

Maximum operating pressure: 60 bar RP2 1/2

Maximum outlet pressure: 17.7 bar 144 GN

Type of connection: Rp
Size of connection: 2 1/2 inch
Motor diameter: 6 inch
Minimum borehole diameter: 150 mm
1249

Liquid:
Pumped liquid: Water
1856

Liquid temperature range: -15 .. 40 °C

Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Electrical data:
Motor type: MS6000
607

Motor flange design: Grundfos

Rated power - P2: 9.2 kW
Power (P2) required by pump: 9.2 kW 139.5

Main frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 21.8-21.2-21.2 A Y DOL
Starting current: 480-520-550 % L1 L2 L3 PE L1 L2 L3 PE

Cos phi - power factor: 0.84-0.82-0.78

Rated speed: 2850-2870-2880 rpm
Start. method: SD
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F W2 U2 V2 U1 V1 W1

Built-in motor protection: NONE U1 V1 W1 PE PE

Thermal protec: EXT. M M

3 3
Built-in temperature transmitter: Y
Length of cable: 5m
U1, W2 Brown
Power cable type: FLAT
V1, U2 Black
Motor Number: 78695513 W1, V2 Grey
Cable number: 96164209
 Company name:
Created by:
Phone:

Date: 10/31/2024

Description Value
Windings: Enamelled
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 71.7 kg
Gross weight: 101 kg
Shipping volume: 0.232 m³
Environmental approvals: WEEE
 Company name:
Created by:
Phone:

Date: 10/31/2024

92952194 SP 18-16 50 Hz

RP2 1/2
144 GN
1249

1856
607

139.5

Note! All units are in [mm] unless otherwise stated.

Disclaimer: This simplified dimensional drawing does not show all details.