Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Sigma: Sigma CP Conventional Fire Alarm Control Panels

    Uploaded by

    Babali Med
    This document provides information about Sigma CP conventional fire alarm control panels that conform to BS EN54-2 and BS EN54-4 standards. The panels come in 2, 4, or 8 zone models and can be wired as 2-wire or standard systems. They have features such as adjustable sounder delays, compatible detectors, and monitored sounder outputs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sigma: Sigma CP Conventional Fire Alarm Control Panels

    Uploaded by

    Babali Med
    61 views2 pages
    This document provides information about Sigma CP conventional fire alarm control panels that conform to BS EN54-2 and BS EN54-4 standards. The panels come in 2, 4, or 8 zone models and can be wired as 2-wire or standard systems. They have features such as adjustable sounder delays, compatible detectors, and monitored sounder outputs.

    Original Title

    Centrale Sigma-CP

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about Sigma CP conventional fire alarm control panels that conform to BS EN54-2 and BS EN54-4 standards. The panels come in 2, 4, or 8 zone models and can be wired as 2-wire or standard systems. They have features such as adjustable sounder delays, compatible detectors, and monitored sounder outputs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views2 pages

    Sigma: Sigma CP Conventional Fire Alarm Control Panels

    Uploaded by

    Babali Med
    This document provides information about Sigma CP conventional fire alarm control panels that conform to BS EN54-2 and BS EN54-4 standards. The panels come in 2, 4, or 8 zone models and can be wired as 2-wire or standard systems. They have features such as adjustable sounder delays, compatible detectors, and monitored sounder outputs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Sigma

    CP
    !
    EW
    N
    BS EN54-2

    Sigma CP BS EN54-4
    KM 73505

    Conventional
    Fire Alarm
    Control Panels
    Model No. K11080M2

    Two, four and eight


    zone, 2-wire or standard,
    programmable fire
    control panels
    conforming to BS EN54-2
    & BS EN54-4 for smaller
    conventional detection
    systems requiring high
    performance and quality.

    Features Product Overview

    Fully compliant with & tested The S igma CP range consists of a series of
    Adjustable sounder delay time conventional f ire alarm control panels designed in
    to BS EN54-2 and BS EN54-4
    Sounder configuration options accordance with European standards BS EN54-2
    2-wire and standard and BS EN54-4 Fire D etection and Fire A larm
    Zonal sounder delay detectors only versions in 2, 4 or 8 zones systems - Control and Indicating Equipment.

    Zonal sounder delay call points only Compatible for use on


    The range consists o f 2, 4 and 8 zone control
    BS5839: Part 1: 2002
    Coincidence input selection installations panels. A ll control panels are available in t wo
    versions:
    I.S Barrier selection by zone
    2-wire repeaters and
    Short circuit fire by zone ancillary boards Sigma K11 r ange in w hich detectors and call
    points are wired on separate circuits t o
    Non latching zones Fully programmable using sounders (two sounder circuits are provided).
    simple menu options
    Silent zones
    Sigma T11 r ange in w hich detectors, c all
    Simple, single board
    Zone input delay points and sounders are wired to the same pair
    construction
    of cables. Commonly referred to a s a two-wire
    General panel configuration system.
    Installer friendly

    Compatible with Wiring sounders to the detection circuits eliminates


    wide range of the need to i nstall s ounder c ircuit cables and also
    detection devices offers the ability t o provide zoned or t wo stage
    sounder operation.
    Two monitored
    sounder outputs
    All control panels have an integral, mains powered
    3 Amp power supply battery charger and power s upply designed in
    accordance with the requirements of BS EN54-4.
    Auxiliary power output

    Page 36
    Technical

    Specifications Size - 385mm(W) x 310mm(H) x 92mm(D)


    Construction - 1.2mm mild steel
    Colour - BS 00 A 05 (grey texture) - lid & box
    Ral 7047 (light grey) - controls plate
    DS37.05.2005 Supply voltage - 230V AC (+10%/-15%)
    Mains supply fuse - 1.6 Amp 250V
    Power supply DC rating - 24V 3 Amps
    Maximum battery size - 7Ah 12V (2 per panel)
    Fault contact rating - 30V DC 1 Amp
    Local fire contact rating - 30V DC 1 Amp
    Fire contact rating - 30V DC 1 Amp
    Sounder output rating - 0.5A per output (max 1.6A over all outputs)
    Detection zone current - 1.6 milliamps
    Detection zone - 6k8 5%
    end of line resistor
    Sounder output - 10k 5%
    end of line resistor
    Cable capacity - 2.5mm² per terminal
    Operating temperature - -5°C to +50°C
    Operating humidity - <95% (non condensing)

    90 385

    Conventional
    Zone Chart General System Status Fire In Zone
    Fire Power Fault
    1 2 3 4
    1 Power On Sounder Fault/
    Disablement
    Zone Fault/Test/Disablement System Mode
    2
    Delay On General Fault
    Fire In Zone
    3
    310

    Test Mode On System Fault


    4 5 6 7 8
    General Alarm/Fault
    Disablement Warning Silenced
    5 Zone Fault/Test/Disablement Enable Control
    6
    Silence/Sound Alarm/Fault Reset Lamp Mode Select Enter
    7 Alarm Warning Silence Test (+10) (+1)

    Fire Alarm Control


    Model: K11080M2

    BS EN54-2 : 1998
    BS EN54-4 : 1998 KM 73505

    Panels

    Product Description Standby Alarm


    Code Current Current

    K11020M2 2 zone control panel 0.065 Amps 0.1 Amps


    K11040M2 4 zone control panel 0.075 Amps 0.21 Amps
    K11080M2 8 zone control panel 0.093 Amps 0.55 Amps
    Certificate No. FM 32987
    BS EN ISO 9001: 2000
    T11020M2 2 zone, 2 wire panel 0.065 Amps 0.15 Amps
    T11040M2 4 zone, 2 wire panel 0.075 Amps 0.3 Amps
    T11080M2 8 zone, 2 wire panel 0.093 Amps 0.63 Amps

    Certificate No. 360


    BS EN ISO 9001: 2000 The manufacturer reserves the right to amend specifications without prior notice Page 37

    You might also like