Slant +/- 45° Dual Polarized, Panel 63° / 18.

5 dBi

Mechanical specifications BXA-185063/8CF ___

Length 1238 mm 48.75 in
When ordering, replace “___” with connector type.
Width 154 mm 6.06 in
1)
Depth 80 mm 3.15 in Radiation-pattern
4)
Weight 4.5 kg 10.0 lbs
-100 -90 -80
-110 -70
Wind Area -130
-120 -60
-50
2 2 -140 -40
Front 0.191 m 2.05 ft -150 -30
2 2
Side 0.099 m 1.07 ft -160 -20

Rated Wind Velocity (Safety factor 2.0) -170 -10

180 35 30 25 20 15 10 5 0
>322 km/hr >200 mph 170 10

Wind load @ 100 mph (161 km/hr) 160 20

150 30
Front 288 N 65 lbs 140 40
Side 170 N 38 lbs 130 50
120 60
110 70
Antenna consisting of aluminum alloy with brass feed- 100 90 80

lines covered by a UV safe fiberglass radome.

Horizontal
Mounting & Downtilting:
-100 -90 -80
Wall mounted or pole tower mount with mounting -110 -70
-120 -60
brackets. -130 -50
-140 -40
Mounting bracket kit #26799997
-150 -30
Downtilt bracket kit #26799999 -160 -20
The downtilt bracket kit includes the mounting -170 -10
bracket kit. 35 30 25 20 15 10 5
180 0

Electrical specifications 170

160 20
10

Frequency Range 1850-1990 MHz 150 30

140 40 Amphenol Antel’s
Impedance 50Ω 130 50 Exclusive 3T (True
120 60
3)
Connector NE, E-DIN 110
100 90 80
70 Transmission Line
1)
Technology)
VSWR ≤1.4:1 Vertical Antenna Design:
Polarization Slant ± 45°
• Watercut brass feedline assembly for
1) consistent performance.
Isolation Between Ports < -30 dB
1)
Radiation patterns for all antennas • Unique feedline design eliminates the
Gain 18.5 dBi are measured with the antenna need for conventional solder joints in
the signal path.
2)
Power Rating 250 W mounted on a fiberglass pole. • A non-collinear system with access to
1) every radiating element for broad band-
Half Power Angle
Mounting on a metal pole will width and superior performance.
H-Plane 63° typically improve the Front-to- • Air as insulation for virtually no internal
signal loss.
E-Plane 7° Back Ratio.
1)
Every Amphenol Antel antenna is under a
Electrical Downtilt 0° five-year limited warranty for repair or re-
1) placement.
Null Fill 5%
Lightning Protection Direct Ground Antenna available with center-fed
connector only.
Patented Dipole Design: U.S. Patent No. 6,597,324 B2
1)
Typical Values
2)

3)
Power Rating limited by connector only. CF Denotes a Center-Fed
NE indicates an elongated N Connector.
E-DIN indicates an elongated DIN Connector. Connector.
4)
The antenna weight listed above does not include the
bracket weight.
Improvements to mechanical and/or electrical performance of the
antenna may be made without notice.
1850-1990 MHz
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Revision Date: 8/23/04
Fax. (815) 399-0156 Email: antel@antelinc.com www.antelinc.com