Von Newman Architecture
Von Newman Architecture
Von Newman Architecture
THEORY: - Von-Neumann proposed his computer architecture design in 1945 which was
later known as Von-Neumann Architecture. It consisted of a Control Unit, Arithmetic, and
Logical Memory Unit (ALU), Registers and Inputs/Outputs.
Von Neumann architecture is based on the stored-program computer concept, where instruction
data and program data are stored in the same memory. This design is still used in most computers
produced today.
The Central Processing Unit can also be defined as an electric circuit responsible for executing
the instructions of a computer program.
The CPU performs a variety of functions dictated by the type of instructions that are
incorporated in the computer.
The major components of CPU are Arithmetic and Logic Unit (ALU), Control Unit (CU) and a
variety of registers.
The Arithmetic and Logic Unit (ALU) performs the required micro-operations for executing the
instructions. In simple words, ALU allows arithmetic (add, subtract, etc.) and logic (AND, OR,
NOT, etc.) operations to be carried out.
Control Unit
The Control Unit of a computer system controls the operations of components like ALU,
memory and input/output devices.
The Control Unit consists of a program counter that contains the address of the instructions to be
fetched and an instruction register into which instructions are fetched from memory for
execution.
Registers
Registers refer to high-speed storage areas in the CPU. The data processed by the CPU are
fetched from the registers.
1) MAR (Memory Address Register) - This register holds the memory location of the data that
needs to be accessed.
2) MDR (Memory Data Register) - This register holds the data that is being transferred to or
from memory.
3) AC (Accumulator) - This register holds the intermediate arithmetic and logic results.
4) PC (Program Counter) - This register contains the address of the next instruction to be
executed.
5) CIR (Current Instruction Register) - This register contains the current instruction during
processing.
Buses
Buses are the means by which information is shared between the registers in a multiple-register
configuration system.
A bus structure consists of a set of common lines, one for each bit of a register, through which
binary information is transferred one at a time. Control signals determine which register is
selected by the bus during each particular register transfer.
Von-Neumann Architecture comprised of three major bus systems for data transfer.
1) Address bus- Address Bus carries the address of data (but not the data) between the processor
and the memory.
2) Data bus- Data Bus carries data between the processor, the memory unit and the input/output
devices.
Memory Unit
A memory unit is a collection of storage cells together with associated circuits needed to transfer
information in and out of the storage. The memory stores binary information in groups of bits
called words. The internal structure of a memory unit is specified by the number of words it
contains and the number of bits in each word.
Input output unit: Program or data is read into main memory from the input device or
secondary storage under the control of CPU input instruction. Output devices are used to
output the information from a computer. If some results are evaluated by computer and it is
stored in the computer, then with the help of output devices, we can present them to the user.