MAN Green Power
MAN Green Power
MAN B&W
MAN B&WDiesel
Diesel AG
Abstract
The paper presents MAN B&W Diesel group’s advances in the field of
renewable energy from workshop and field testing to commercial operation
of medium-speed Diesel engines with a variety of liquid biofuels including
biological oils and recycled fat.
Worldwide commitment to the continuous growth of renew- The tests showed no major deviations in Diesel engine’s
able energy production is giving increasing room for the combustion and injection patterns as well as no significant
use of liquid biofuels in internal combustion engines. Larger changes on the engine performance and reduction of main
bore medium-speed Diesel engines are best suited to burn noxious emissions with the exception of NOX.
low cost liquid biofuels such as some crude vegetable oils,
waste oils and recycled fat. Commercial operation topping 15,000 hours revealed good
long term operational reliability for biofuels.
MAN B&W carried out initial workshop tests to determine
biofuel compatibility with Diesel engines and to compare The possibility of combining sound economics and superior
respective performance and emission data with the eco-friendliness is driving the development and optimisation
results of most commonly used mineral fuels (MGO, HFO). of Diesel engine’s biofuel combustion to affirm this prime mo-
ver as one of the best available technologies for renewable
Biofuels have been found to match the minimum quality power generation applications.
requirements for operation in medium-speed Diesel engines
although some aggressive waste and residual oils/fats have
acidity above the accepted operating limits for conventional
injection systems.
2
MAN B&W Diesel – Green Power
Introduction
In the next five years liquid biofuels are set to play a major role in the carrying
out of the European Union’s policies and strategies on the promotion of the use
of renewable fuels for its internal electricity and transport markets1.
The use of liquid biofuels to replace diesel or Heavy Fuel Oil CO2 CO2
in internal combustion engines, such as the ones used to
power vehicles and electricity generation plants, carries clear
global environmental benefits. Combustion of biofuels in re-
placement of mineral fuels actually promotes a net reduction
of greenhouse gas emissions (see the case of rapeseed oil El
illustrated at figure A1) and other combustion related pol-
lutants, while allowing simultaneously for appropriate dispo-
sal of waste biological oils of residential, commercial and/or Rape Seed Oil Heat
industrial origin. Other consensus arguments in favour of bio-
fuels is its potential for local and regional development, pro- Fig. A1: CO2 Balance for green-power generation
from the combustion of rapeseed oil in medium-speed
motion of social and economic cohesion, local job creation Diesel engines
and improvement of regional fuel supply security by reducing
the need for fuel imports.
A number of small bore high-speed engine manufacturers lacquering and seizure of fuel injection equipment, filter
reported potential problems when using biodiesel2 in con- plugging, formation of sludge and sediments, reduced ser-
centrations above 5%, some related to deficiencies in hand- vice life, etc. Lower quality fuels such as raw vegetable oils
ling and storage of these fuels, causing severe problems have been reported as simply not acceptable for use in any
on the engine level including power loss and deterioration concentration: in some high-speed engines these oils do not
of performance, fuel leakage, corrosion, coking, blocking, burn completely and finally cause engine failure by leaving
deposits on the injectors and in the combustion chamber.
1 Directive 2001/77/EC of the European Parliament and of the Council of 27 September 2001 on the promotion of the electricity produced from
renewable energy source in the internal electricity market.
Directive 2003/30/EC of the European Parliament and of the Council of 8 May 2003 on the promotion of the use of biofuels and other renewable
fuels for transport.
2 Theexpression biodiesel is the common designation for the various fuels collectively known as Fatty Acid Methyl Ester: the most common are RME
(Rapeseed Methyl Ester), PME (Plant Methyl Ester) and SME (Soybean Methyl Ester) available in Europe and the US, respectively.
3
Due to its design and construction characteristics larger The paper hereinafter introduces innovative applications of
bore medium-speed Diesel engines are best suited to raw biological oils and recycled fat in medium speed Diesel
burn low quality liquid fuels such as crude vegetable oils engines for power generation purposes, from early research
and some waste and recycled biofuels, which are also the and development work at MAN B&W Diesel in Holeby,
cheapest available biofuels in the world. The possibility of Denmark to field tests.
combining sound economics and superior eco-friendliness
in the operation of its prime movers led MAN B&W to It also presents the most recent results of the biofuel
enter the development and optimisation of liquid biofuel combustion development in larger bore Diesel Engines at
combustion in its medium speed family of Diesel engines. MAN B&W Diesel’s Augsburg centre of competence.
4
MAN B&W Diesel – Green Power
Experimental Methods
5
Properties of the tested biofuels
Property Unit Palm oil Rape seed oil Fish oil Used frying oil MGO HFO Limit
Density at 15°C kg/m3 914.9 920.7 926.3 923 843 < 1010
Lower Cal. Value MJ/kg 36.865 36.89 36.60 36.851 42.82 40.75*
Lower Cal. Value MJ/ltr. 33.96 33.90 34.01 36.10 39.82*
Viscosity @ 40°C cSt 40.2 33.8 29.6 37@50°C 3.42 < 700
Viscosity @ 100°C cSt 8.33 7.88 7.23 11.3 < 55
Ash %w 0.008 0.0079 0.008 < 0.001 < 0.2
Carbon %w 76.6 77.7 77.5 77.2 87.7 86.8*
Hydrogen %w 11.9 12 11.4 11.8 13.3 10.6*
Nitrogen %w < 0.1 1 0.1 < 0.05 < 0.1 0.4*
Sulphur %w < 0.05 < 0.05 < 0.05 < 0.1 < 0.05 <5
Total Acid Number mg KOH/g 10.6 2.4 13.1 3.9 <1 < 1*
Cetane nr Typical 52 > 40 > 20
Carbon Residue % 0.57 < 0.2 < 22
*example
6
MAN B&W Diesel – Green Power
7
Properties of the tested biofuels
Spezification
Density (15 °C) 900 – 930 kg/m3 DIN EN ISO 3675, EN ISO 12185
Flash point > 60 °C DIN EN 22719
Lower calorific value > 35 MJ/kg DIN 51900-3
(typical: 36.5 MJ/kg)
Viscosity (50 °C) < 40 cST DIN EN ISO 3104
Cetane number > 40 FIA
Coke residue < 0.4 % DIN EN ISO 10370
Sediment content < 200 ppm DIN EN 12662
Oxidation stability (110 °C) >5h ISO 6886
Phosphorus content < 15 ppm ASTM D3231
Na + K content < 15 ppm DIN 51797-3
Ash content < 0.01 % DIN ISO 6245
Water content < 0.5 % EN ISO 12537
TAN (total acid number) < 4 mgKOH/g DIN EN ISO 660
Cold Filter Plugging Point < 10 °C below lowest EN 116
temperature in fuel system
8
MAN B&W Diesel – Green Power
Table A3 below shows the reference list of commercial Medium-speed Diesel engines’ capacity of burning a wide
power plants featuring MAN B&W medium-speed engines variety of these fuels is therefore vital to secure continuous
operating with biofuels as raw vegetable oils, waste oil operation of the engines (above 8,000 hours/year).
and recycled fat.
Qlear, Holland/Switzerland* 9L16/24 760 kW Vegetable oils / June 2001 > 3,000
Waste cooking oil
Mann Energie, Germany 9L16/24 760 kW Raw and waste June 2001 > 15,000
Aigremont, Belgium vegetable oil
Qlear/EMACON, Austria 7L28/32H 1,575 kW Waste cooking oil January 2004 > 12,000
Fritzens, Austria 6L21/31 1,160 kW Recycled frying fat May 2004 > 14,000
Qlear, Italy 7L28/32H 1,575 kW Recycled animal fat January 2005 > 2,000
SPE Harelbeke, Belgium 14V52/55 85,000 kW Palm oil 2005/2006
Wiessner Distillery, Germany 5L27/38 2,888 kW Palm oil 2006
Belgium 18V48/60 17,400 kW Waste oil 2006 contract signed
Germany 12V32/40 5,529 kW Palm oil 2006 contract signed
*re-commissioned October 2004
9
Results
180 0.8
Pmax [bar]
100
Fish oil 0.2
60 0
25 50 75 100 25 50 75 100
Load [%] Load [%]
250 800
Spec fuel oil consumption [g/kWh]
Hu 42707
MGO MGO
700
Palm oil 230 Refi Waste oil
210
Fish oil 500
190 400
25 50 75 100 25 50 75 100
Load [%] Load [%]
Fig. A3: Maximum pressure inside the cylinder and specific Levels of smoke and nitrogen oxides emissions for
fuel oil consumption for different load steps: palm oil versus different load steps: biofuels such as rapeseed, fish oil
Marine Gas Oil operation and refined waste oil against Marine Gas Oil operation.
10
MAN B&W Diesel – Green Power
Discussion / Analysis
>> Physical and chemical properties for the majority of the >> There is no substantial change on the engine efficiency
biofuels tested were within the minimum quality require- and measured specific exhaust gas flows. Carbon
ments for operation in medium-speed Diesel engines. dioxide specific emissions of biofuel combustion in
Higher viscosity biofuels need to be heated up suffi- Diesel engines are therefore very similar to the ones
ciently to reduce viscosity to injection levels between when using mineral fuels since the lower calorific value
12 to 15 cSt (this corresponds to heating these biofuels of biofuels is compensated by the lower carbon content
up to a level of 60-80ºC). of these fuels. In the case of vegetable oils one should
account for the positive contribution to the carbon
>> Biofuel has the following identifying features when dioxide cycle since this greenhouse gas is captured
compared to Marine Gas Oil: lower net calorific value, back when growing the crop.
higher viscosity and density, lower stoichiometric air-
to-fuel ratio because of higher oxygen content. >> While sulphur oxides are negligible and smoke emis-
sions are significantly lower, nitrogen oxides emissions
>> Some waste and residual oils/fats have acidity could experience however an increase by operation
(measured by the TAN - Total Acid Number) above with biofuels. Installation of catalytic ‘DeNOx’ systems
the accepted operating limits for conventional injection allow the abatement of these emissions down to the
systems. level of the strictest environment regulations
(e.g. German Clean Air Act - TA-Luft).
>> There is no major deviation in the combustion process
when running Diesel engines with biofuels. The tests >> Reliable commercial operation of medium-speed
showed similar patterns in the rate of heat release engines with biofuels is proven by over 15,000
during the combustion as well as measured maximum operating hours burning biofuels with FFA content
cylinder pressure rise with increased loads on engines of 2% (TAN 4).
running both with biofuels and Diesel oil.
11
Conclusion
Several commercial green-power plants have now been rea- The possibility of combining sound economics and supe-
lised in Europe and good long-term operational reliability has rior eco-friendliness is leading to the optimisation of Diesel
been confirmed. engine’s biofuel combustion to affirm this prime mover as
Availability of large quantities of biofuels is however neces- one of the best available technologies for renewable power
sary to ensure reliable and continuous power. The capacity generation applications.
of medium-speed Diesel engines to burn a wide variety of
these fuels is therefore vital to secure continuous operation
of the engines.
Author Acknowledgements
Dipl.-Ing. José N. Carranca, MAN B&W do Brasil The Author would like to acknowledge the following for their kind
Praia de Botafogo, 440-9° andar support in writing this paper:
22250-908 Rio de Janeiro - RJ, BRASIL Mr. Jesper Lohse – MAN B&W Diesel A/S - Holeby, Denmark
Email: jose.carranca@manbw.com.br Mr. Finn Alsgren – MAN B&W Diesel A/S - Holeby, Denmark
Mr. Peter Frederiksen – MAN B&W Diesel A/S – Holeby, Denmark
Mr. Siegfried Mayr – MAN B&W Diesel AG - Augsburg, Germany
Mr. Géza Schenk - MAN B&W Diesel AG – Augsburg, Germany
Dr. Holger Gehring - MAN B&W Diesel AG – Augsburg, Germany
Dr. Georg Tinschman - MAN B&W Diesel AG – Augsburg, Germany
12
MAN B&W Diesel – Green Power
Appendix A1
Table A5: Characteristics of MAN B&W single cylinder Fig. A4: Biofuel combustion development
1L32/40 test-bed workshop testing.
13
Results
40
8.5
MGO 6.5
5.5
4.5
0 25 50 75 100
Load [%]
14
MAN B&W Diesel – Green Power
6
Delay of ignition [° CA]
5.3
HFO 5
4.3
4
3.6
BF 3 2.7
2.1 2.2
2
MGO
1
0
Generator Operation 25% Load Generator Operation 100% Load
105 12
NOX (6L) [g/kWh]
sfoc 42799 (6L) / sfoc(HFO) 42700 (6L) [%]
HFO HFO
103 11
BF BF
10
MGO 101 MGO
9
99
8
97 7
95 6
0 25 50 75 100 0 25 50 75 100
Load [%] Load [%]
1.2 250
Smoke (FSN AVL[-])
HC [ppm]
HFO HFO
1.0 200
BF BF
0.8
MGO MGO 150
0.6
100
0.4
0.2 50
0.0 0
0 25 50 75 100 0 25 50 75 100
Load [%] Load [%]
Fig. A7: Comparison of thermal efficiency and emissions for different engine loads
15
MAN B&W Diesel AG
Stadtbachstr. 1
86224 Augsburg
Germany
Phone +49 821 322-0
Fax +49 821 322-3382
info@de.manbw.com
www.manbw.com
MAN
MAN B&W
B&W Diesel
Diesel –– aa member
member of
of the
the MAN
MAN Group
Group