K To 12 Basic Education Curriculum: Shielded Metal Arc Work (SMAW)
K To 12 Basic Education Curriculum: Shielded Metal Arc Work (SMAW)
Week 1
LEARNING OUTCOMES:
At the end of this Lesson, you are expected to
do the following:
Ball peen hammer- a tool for straightening bending and deforming metals
Chipping hammer- used for removing slag on weld and with two faces, the tapered
from one side and round pointed on the other side
Cold chisel- a wedge-shaped tool used to shear, cut and chip metal
Files- made of high grade steel hardened and tempered. A file has rows of teeth
that form, shape and finish metal by removing small chips and smoothing rough
edges of the metal surface
Hacksaw - a tooth- cutting tool usually with a solid and adjustable frame
Lubricating- a process of maintenance wherein oil is put in between moving parts of
a tool or equipment to prevent the tool from rust or damage
Screw driver- a hand tool that is designed to turn screws. The blade is made of
steel, attached to one end of which a wooden or plastic handle
Tightening/ loosening- a process where tools and equipment are adjusted based
on standard procedure
Wrench- used for loosening and tightening light and heavy nuts and bolts.
LEARNING OUTCOME 1
Select and classify hand tools and equipment
PERFORMANCE STANDARD S
Hand tools selected are appr opriate to the requirements of the task.
Unsafe or defective tools are identified and mark ed for repair according to
procedure.
Pretest LO 1
Multiple Choice - Directions: Choose the letter of the correct answer Use separate
sheet of paper.
1. A tooth cutting tool usually with the solid and adjustable frame.
A. Hacksaw B. Screw driver
B. Hammer D. Wrench
2. Tool used for loosening and tightening light and heavy nuts and bolts.
A. Hacksaw B. Screw driver
C. Hammer D. Wrench
3. This tool is used to tighten and loosen screws by pushing or pulling screws in a
rotating manner.
A. Hacksaw B. Screw driver
C. Hammer D. Wrench