Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    Reckli PUR-Elastomer A60: Technical Pamphlet

    Uploaded by

    Renzo Radrigez
    1

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Reckli PUR-Elastomer A60: Technical Pamphlet

    Uploaded by

    Renzo Radrigez
    57 views3 pages
    1

    Original Title

    03702_PUR-Elastomer_A60_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views3 pages

    Reckli PUR-Elastomer A60: Technical Pamphlet

    Uploaded by

    Renzo Radrigez
    1

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    TECHNICAL PAMPHLET

    RECKLI PUR-
    RECKLI® PUR-Elastomer A60 Elastomer A60

    Product 03702
    Edition 10/17
    castable polyurethane elastomer, standard grade

    PROPERTIES

    RECKLI PUR-Elastomer A60 is a solvent-free, rubbery-elastic, liquid, two-


    component polyurethane, cold-curing, almost shrinkage-free, after curing
    sliceable and grindable. It shows high chemical resistance against aqueous alkali,
    especially concrete.

    APPLICATIONS

    RECKLI PUR-Elastomer A60 is used for manufacturing flexible models, fittings,


    formliners and moulds ensuring exact reproduction of surface contours and
    textures. Easy stripping of castings is enabled by using suitable release agents.
    RECKLI PUR-Elastomer A60 is particularly suitable for making durable formliners
    for the manufacture of structured exposed concrete.

    TECHNICAL DATA

    property value method

    hardener: for PUR-Elastomer A45, A60, SR30


    mixing ratio (base : hardener): 9:1 (according to weight)
    workable temperature: +15 °C – +30 °C
    viscosity (at +21 °C): 4500 mPa·s ISO 2555
    pot life (200-g-mixture at +21 °C): approx. 15 min
    earliest demoulding (at +21 °C): 24 h
    full chemical
    and mechanical loading after: 7 – 10 days
    density: 1,40 g/cm³
    hardness: 60 Shore A DIN 53505
    tensile strength: 4,2 N/mm² DIN 53504-S2
    elongation at break: 500 % DIN 53504-S2
    tear resistance: 17 N/mm ASTM D 624-B
    heat resistance (dry heat): +65 °C
    heat resistance (under concrete): +60 °C
    colour: grey
    RECKLI GmbH
    These data are typical guide values. They are not destined for the generation of
    Gewerkenstraße 9a
    specifications. D-44628 Herne
    Tel +49 2323 1706-0
    Fax +49 2323 1706-50
    info@reckli.de
    1|3 www.reckli.de
    SURFACE PREPARATION

    The model surface must be dry and clean. Absorbing surfaces should be sealed to RECKLI PUR-
    facilitate the subsequent demoulding and to avoid inaccurate curing. For this, Elastomer A60

    RECKLI PUR-Sealant can be used if the surface is solvent-resistant. Otherwise, Product 03702
    Edition 10/17
    especially if the surface has to be recovered in the original state, RECKLI Si-
    Stripping Lacquer can be applied and removed with water along with all residues
    after completing the moulding works. Afterwards, 2 – 3 layers of RECKLI Mould Wax
    are applied. Each layer has to dry completely.

    When applying several layers of elastomer, the preceding layer should be still
    slightly sticky but sufficiently cured to bear the load of the following application. If
    the surface is completely cured, it must be roughened by grinding before further
    material can be applied.

    PROCESSING

    Each contact with moisture must strictly be avoided. Before processing, the base
    component has to be stirred up thoroughly. Add the hardener (B) to the base
    component (A) and mix them homogenously. Transfer the mixture into a second
    receptacle and stir it up again. Thereby the incorporation of larger amounts of air
    should be avoided. Once mixed the processing of the material must be completed
    within the pot life (15 minutes). The shortest demoulding time is 24 hours.

    METHOD OF PROCESSING

    Full cast or front cast.

    CLEANING OF EQUIPMENT

    For the cleaning of the tools and the equipment, use dry, absorbing cloths, if
    necessary RECKLI Epoxy Cleanser in addition. Immersion in solvents is not
    sufficient.

    SPECIAL REMARKS

    To ensure dimensional accuracy and maximum life period, moulds made of RECKLI
    PUR-Elastomer A60 are preferably stored in their supporting mould under
    admittance of air. Prolonged compression may lead to irreversible deformation.
    The moulds must be protected against UV irradiation and direct insolation.

    PACKAGING SIZES

    RECKLI GmbH
    double drums: 20 kg | 10 kg;
    Gewerkenstraße 9a
    double cans: 1 kg.
    D-44628 Herne
    The hardener is enclosed in the lid. Tel +49 2323 1706-0
    Fax +49 2323 1706-50
    info@reckli.de
    2|3 www.reckli.de
    STORAGE

    Store in a dry place at room temperature. RECKLI PUR-Elastomer A60 is storable for RECKLI PUR-
    6 months from delivery when kept in the closed original packaging at about 18 °C. Elastomer A60

    Opened drums must be closed airtight right after use. Product 03702
    Edition 10/17

    GENERAL INFORMATION

    For further information please also see:


    „General advice for making moulds and models using RECKLI two-component
    polyurethanes”.

    SAFETY

    Protect skin and eyes from material splashes. Provide sufficient ventilation in the
    working place. Please consult the relevant safety data sheet and attend to the
    indications on the label of the package regarding the Dangerous Goods Regulation.

    RECKLI PUR-Elastomer A60 exclusively consists of components that are registered


    according to regulation 1907/2006/EU (REACH) or exempt from registration. It is
    free from contents according appendix XIV (SVHC) and mercury compounds.

    This pamphlet is intended solely as an application directive. It does not claim to be


    binding and valid for all modes of application. A preliminary test under operation
    conditions is highly recommended.

    This pamphlet replaces all previously published pamphlets concerning RECKLI


    PUR-Elastomer A60, stating them as no longer being valid.

    RECKLI GmbH

    Gewerkenstraße 9a
    D-44628 Herne
    Tel +49 2323 1706-0
    Fax +49 2323 1706-50
    info@reckli.de
    3|3 www.reckli.de

    You might also like