KLEBTH PUR-5000 TDS Eng

klebstoffe montage technik !
TECHNICAL DATA SHEET
KLEBTH-PUR-5000 KLEB & DICHTSTOFFE

1K POLYURETHANE BASIS KLEB UND DICHTSTOFFE
Special Properties Instructions for use
KLEBTH PUR-5000 is a single component The surfaces of the workpieces to be bonded

fast cure polyurethane based elastomeric must be dry, and free from dust and grease.
sealant; It forms a joint of high elasticity and Depending on the material surface, check if
has a good resistance to tear and to weather. the bonding result can be improved by
grinding or applying of primer. Polyolefins
KLEBTH PUR-5000 has CE marking for (among others PE, PP) cannot be bonded
following applications: without preparation, e.g. plasmaor corona
treatment. If PS hard surfaces are bonded,
- sealant for facade elements for interior and generally we recommend using a primer.
exterior applications usable in cold climate KLEBTH PUR-5000 is applied on the surface of
according to European Standard EN 15651-1 one of the parts to be bonded in one-sided “S”
(F EXT-INT CC).
form. For large surface adhesives, the product
- sealant for pedestrian walks for interior and
can be spread with a spatula.
exterior applications usable in cold climate
according to European Standard EN 15651-4
(PW EXT-INT CC). To ensure a homogeneous adhesive thickness,
apply the adhesive in the form of a triangular
bead and / or in the form of an "S" bead. It
Examples for Application can be used with a manual or pneumatic gun.
Do not apply at temperatures below + 5°C.
▪ General Industrie; Automotive Industrie; Curing slows down at low temperatures. After
▪ Building construction and building trade. application, it can be shaped and corrected
▪ With many assembly bonding processes. with soapy water and trowel.
▪ Diverse industrial fields.
Compatibility with paints
KLEBTH PUR-5000 is specially adapted for
bonding various materials used in the general
KLEBTH PUR-5000 can be painted after skin
industry and for expansion joints.
formation. Water, 1C-PUR and 2C acrylic based
This sealant adheres without primer on paints are generally suitable; process,
substrates commonly used, like wood, complete curing should be expected. All types
anodized aluminium, polyester, concrete, of paint must be tested before processing.
glass. For difficult materials, including plastics Paints with low elasticity may crack.
such as PVC, ABS, PMMA, or materials such
as raw aluminium or lacquered metal, perform When used in cold weather, leave the
preliminary tests to determine whether a packages at approximately + 20°C before
surface preparation is necessary. application.
Avoid contact with solvents such as alcohol

and solvent and uncured silicone, MS, hybrid
PU during the curing process.
Rev. 11.03.2014
die professionelle lösungen ! Sayfa 2-1
info@klebth.com / www.klebth.com
klebstoffe montage technik !
Technical Data
1C humiditycross linking polyurethane

Base
Color Black - White- Grey
Viscosity Low viscous pasty
Density approx. 1.16 g/cm3
Skinning time dry +23°C and 50 % HR approx. 60 min
Cure time at 23 °C and 50 % HR 4 mm after 24 h
Shore A hardness (internal method IT- approx. 45

20 after ISO 868 - 3 seconds)
Tear strength (DIN 53515) approx. 10 N/mm
Minimum processing temperature +5˚C
Temperature resistance -40 to +90°C
Elongation at break (ISO 37) > 600 %
Modulus at 100 % (ISO 37) approx. 0.5 MPa
Cleaning Storage
Remove the fresh, not cured adhesive from the Store in the hermetically closed original
surfaces and the tools using KLEBTH C-5000 packages, dry at temperatures of +15 °C to
Cured adhesive can only be removed +25 °C, no direct sun radiation.
mechanically Storage life in unopened original packagings
12 Months. In cold weather, store the
packaging at about +20°C before use.
Die Angaben sind ohne Gewähr und berücksichtigen den derzeitigen Stand The above data are the results of our experiences and they have to be
der chemischen und technischen Entwicklung. Abänderungen und considered as suggestions, due to the variety
Weiterentwicklungen behalten wir uns vor. of the working conditions.
Aufgrund der unübersehbaren Anzahl von Anwendungsgebieten kann

keine Haftung für das Verarbeitungsergebnis übernommen werden. Vor
Verarbeitung sind daher Eigenversuche durchzuführen.
die professionelle lösungen ! Sayfa 2-2

Rev. 11.03.2014
info@klebth.com / www.klebth.com

KLEBTH PUR-5000 TDS Eng

Uploaded by

Copyright:

Available Formats

KLEBTH PUR-5000 TDS Eng

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KLEBTH PUR-5000 TDS Eng

Uploaded by

Copyright:

Available Formats

klebstoffe montage technik !

TECHNICAL DATA SHEET

KLEBTH-PUR-5000 KLEB & DICHTSTOFFE

Special Properties Instructions for use

KLEBTH PUR-5000 is a single component The surfaces of the workpieces to be bonded

Avoid contact with solvents such as alcohol

1C humiditycross linking polyurethane

Color Black - White- Grey

Viscosity Low viscous pasty

Density approx. 1.16 g/cm3

Skinning time dry +23°C and 50 % HR approx. 60 min

Cure time at 23 °C and 50 % HR 4 mm after 24 h

Shore A hardness (internal method IT- approx. 45

Tear strength (DIN 53515) approx. 10 N/mm

Minimum processing temperature +5˚C

Temperature resistance -40 to +90°C

Elongation at break (ISO 37) > 600 %

Modulus at 100 % (ISO 37) approx. 0.5 MPa

Aufgrund der unübersehbaren Anzahl von Anwendungsgebieten kann

die professionelle lösungen ! Sayfa 2-2

You might also like