Combinepdf 1st Term

Agile model advantage are__?
a. Little or no planning required

b. All of the answer options are correct
c. Functionality can be developed rapidly and demonstrated
d. Gives flexibility to developers Feedback
The correct answer is: All of the answer options are correct
Which model is also called as the classic life cycle or the Waterfall model?
a. Incremental Development
b. RAD Model
c. Linear Sequential Development
d. Iterative Development
The correct answer is: Linear Sequential Development
Which of these is not one of the phase names defined by the Unified Process model for software
development?
a. Validation phase
b. Construction phase
c. Elaboration phase
d. Inception phase Feedback
The correct answer is: Validation phase
Which term is best defined by the text? "A class should not force any client to implement an
interface that is irrelevant to them."
a. Open-Closed Principle
b. Dependency Inversion Principle
c. Interface Segregation Principle
d. Liskov Substitution Principle
e. Single-Responsibility Principle Feedback
The correct answer is: Interface Segregation Principle
Usually the Probability of defects in reusable software components is ______ and its impact on
the ongoing IT project is _______
a. low, insignificant
b. moderate, serious
c. low, catastrophic
d. high, tolerable
The correct answer is: moderate, serious
Consider the following Steps: (i) Waterfall Model (ii) Agile Model (iii) Scrum Model (iv)
Unified Process Model. Among them which model is use-case driven ?
a. iv
b. i. ii.
c. iii
d. iii. iv.
The correct answer is: iv
Which of the following is NOT an indicator of Risk for an IT Project?

a. Many requirements change requests from customers
b. Demands for higher-powered workstations
c. No report on technology problems from the developers
d. Good availability of IT Jobs in the socio-economic condition
The correct answer is: No report on technology problems from the developers
Usually Project Planning is _________ activity of project management.

a. least time-consuming
b. critical time-consuming
c. moderately time-consuming
d. most time-consuming
The correct answer is: most time-consuming
Which one is the not the properties of Software Prototype Model?

a. Building software application prototypes which displays the functionality of the product under
development
b. Enables to understand customer requirements at an early stage of development
c. Hold the exact logic of the original software
d. Becoming very marketable
The correct answer is: Hold the exact logic of the original software
Which are true about OCP, LSP and ISP?

a. OCP is about class design and feature extensions
b. ISP is about business logic to clients communication
c. LSP is about subtyping and inheritance
d. All of the options are true
The correct answer is: All of the options are true

a. Good availability of IT Jobs in the socio-economic condition
b. Complaints about CASE tools
c. Lack of requirements change requests from customers
d. Organisational gossip
The correct answer is: Lack of requirements change requests from customers
Which phase of Prototype Model focuses on a representation of those aspects of software that
will be visible to end user?
a. Communication
b. Quick design
c. Deployment
d. Construction of Prototype
The correct answer is: Quick design
Who is originator of the term Single Responsibility Principle(SRP)?

a. Robert C. Martin
b. John Backus
c. Konrad Zuse
d. Dennis Ritchie
The correct answer is: Robert C. Martin
What does Liskov substitution principle specify?

a. Parent class cannot be substituted by child class
b. Child class can be substituted by parent class
c. Parent class can be substituted by child class
d. No classes can be replaced by each other
The correct answer is: Parent class can be substituted by child class
In dependency inversion principle _______ should not depend on details.

a. Details
b. Abstructions
c. Modules
d. None of them
The correct answer is: Abstructions
Which of these is not one of the phase names defined by the Unified Process model for software
development?
a. Construction phase
b. Inception phase
c. Validation phase
d. Elaboration phase
High level and low level modules both should be dependent on _________
a. Classes
b. Interface
c. All of them
d. Abstractions
The correct answer is: Abstractions
The milestone document related to Requirements Specification is ______

a. Evaluation report
b. Architectural design
c. NONE of the answer options is true
d. User requirements
The correct answer is: NONE of the answer options is true
_______ is Probably the most time-consuming activity of project management.

a. Personnel selection and evaluation
b. Project Verification and Validation
c. Project monitoring and reviews
d. Project Planning
The correct answer is: Project Planning
Which of the following is not a Major type of project plan?

a. Monitoring plan
b. Maintenance plan
c. Quality plan
d. Validation plan
The correct answer is: Monitoring plan

2/11/22, 4:48 PM MCSE583-----Quiz #1 on ISM: Attempt review
Dashboard / My courses / ITM / MCSE 583: Information System Management (Spring 2022) / MCSE583-----Quiz #1 on ISM
Started on Friday, 11 February 2022, 10:08 AM

State Finished
Completed on Friday, 11 February 2022, 10:48 AM
Time taken 40 mins 33 secs
Marks 18.00/20.00
Grade 9.00 out of 10.00 (90%)
Question 1
Correct
Mark 1.00 out of 1.00
Which of the following is not a Major Component of the Project Plan Structure?
a. Introduction
b. Project organisation
c. Resource monitoring and reporting
d. Work breakdown
The correct answer is: Resource monitoring and reporting
Correct
Marks for this submission: 1.00/1.00.
Question 2
Correct
What is the primary way a Scrum Master keeps a Development Team working at its highestlevel of productivity?
a. By ensuring the meetings start and end at the proper time

b. By preventing changes to the backlogs once the Sprint begins
c. By facilitating Development Team decisions and removing impediments
d. By keeping high value features high in the Product Backlog
The correct answer is: By facilitating Development Team decisions and removing impediments
Correct
https://mscourses.gnomio.com/mod/quiz/review.php?attempt=2914&cmid=151 1/8
Question 3
Correct
In Unified Process model construction phase uses the architectural model from the elaboration phase as input.
a. None of the answer options are correct

b. True
c. All of the answer options are correct
d. False
The correct answer is: True
Correct
Question 4
Correct
Which of the following is a Component of the Project Plan Structure?
a. Conclusion
b. Validation procedure
c. Work breakdown
d. Requirements analysis procedure
The correct answer is: Work breakdown
Correct
Question 5
Correct

b. Lack of requirements change requests from customers
c. Complaints about CASE tools
Correct
Question 6
Correct
Single Responsibility Principle (SRP) features are
a. Maintainability
b. All the answer options are OK
c. Flexibility and extensibility
d. Testability
The correct answer is: All the answer options are OK
Correct
Question 7
Correct
Which one is the international standard of SDLC?
a. ISO/IEC 12209
b. ISO/IEC 12207
c. ISO/IEC 12206
d. ISO/IEC 12208
The correct answer is: ISO/IEC 12207
Correct
Question 8
Correct
a. LSP is about subtyping and inheritance

b. ISP is about business logic to clients communication
c. OCP is about class design and feature extensions
d. All of the options are true

Correct
Question 9
Correct
Client-specific interfaces are better than one general-purpose interface in____
a. Liskov Substitution Principle

b. Single-Responsibility Principle
c. Interface Segregation Principle
d. Open-Closed Principle
e. Dependency Inversion Principle
Correct
Marks for this submission: 1.00/1.00. Accounting for previous tries, this gives 0.67/1.00.
Question 10
Correct
Which of the following is not set out by the project plan?
a. A schedule for the work

b. The validation procedure
c. The work breakdown
d. The resources available to the project
The correct answer is: The validation procedure

Correct
Question 11
Correct
Which Agile methodology advocates the use of problem domain?
a. Evo
b. Extreme programming (XP)
c. Feature-Driven Development (FDD.
d. Scrum
The correct answer is: Feature-Driven Development (FDD.
Correct
Question 12
Correct
Usually Project Planning is ___________ activity of project management.
a. moderately time-consuming
c. most time-consuming
d. least time-consuming
Correct
Question 13
Correct
a. Introduction
b. Verification requirements
c. Schedule breakdown
d. Validation procedure
The correct answer is: Introduction

Correct
Question 14
Correct
Which one true about SOLID principles?
a. Describe certain properties that a class should have

b. A class should have only one reason to change
c. SPR should have only one responsibility
d. All the answer options are OK
Correct
Question 15
Correct
The RAD model focuses on _________
a. Pressure on the customer to sign off the requirements

b. High emphasis on requirement analysis and gathering before the coding starts
c. Iterative and incremental delivery of working models to the customer
d. Rigid process models
The correct answer is: Iterative and incremental delivery of working models to the customer
Correct
Question 16
Correct
Who have edit permission product backlog?
a. Development Team
b. Product Owner
c. Scrum Master
d. Product Designer
The correct answer is: Product Owner

Correct
Question 17
Correct
What will be the correct option of the following Java code snippet: interface ICust{} class RegularCustomer implements ICust{} class
OneTimeCustomer implements ICust{}
a. ICust can be replaced with RegularCustomer

b. OneTimeCustomer can be replaced with RegularCustomer
c. We can instantiate objects of ICust
d. RegularCustomer can be replaced with OneTimeCustomer
The correct answer is: ICust can be replaced with RegularCustomer

Correct
Question 18
Correct
SOLID principle consists
a. Open Closed Principle (OCP)

b. Dependency – Inversion Principle (DIP)
c. Interface Segregation Principle (ISP)
e. Liskov Substitute Principle (LSP)
f. Single Responsibility Principle (SRP)
Correct
Question 19
Correct
Which model is most popular process model for the developer now a days?
a. RAD
b. Big Bang
c. Waterfall
d. Agile
The correct answer is: Agile
Correct
Question 20
Correct
a. Validation plan
b. Quality plan
c. Maintenance plan
d. Monitoring plan
Correct
◄ Announcements
Jump to...
Practice MCQ Test (10 Questions, 20 minutes) ►
MCSE583-----Quiz #1 on ISM: Attempt review https://mscourses.gnomio.com/mod/quiz/review.php?attempt=2899&cm...

State Finished
Time taken 50 mins 1 sec
Marks 13.00/20.00
Grade 6.50 out of 10.00 (65%)
Question 1
Correct
How many phases of ASD in Agile Model?
a. 2
b. 4
c. 3
d. 5
The correct answer is: 3

Correct
Question 2
Correct
In a typical IT project, the Probability that Computer-Aided Software Engineering (CASE) tools cannot be integrated is usually ______ and
its effects are _________
a. moderate, serious
b. low, catastrophic
c. low, insignificant
d. high, tolerable
The correct answer is: high, tolerable

Correct
1 of 9 2/11/2022, 2:57 AM
Question 3
Correct
The ___________ model is an SDLC model where we do not follow any specific process and the development just starts with the required
money and efforts.
a. Prototype
b. None of them
c. Big Bang
d. Waterfall
The correct answer is: Big Bang

Correct
Question 4
Correct
a. Validation plan
b. Quality plan
c. Monitoring plan
d. Maintenance plan

Correct
Question 5
Correct

b. All of the options are true
c. LSP is about subtyping and inheritance
d. ISP is about business logic to clients communication

Correct
2 of 9 2/11/2022, 2:57 AM
Question 6
Correct
Why SOLID Principles are important in Software Development?
a. Makes the code more extendable,logical & easier

b. Makes the code more complicated
c. Increases dependencies in software development
d. Creates a complex system
The correct answer is: Makes the code more extendable,logical & easier
Correct
Question 7
Correct
High level module should not depend on low level modules in_____
a. Dependency-Inversion Principle (DIP)

b. Liskov Substitution Principle (LSP)
c. Interface Segregation Principle (ISP)
d. Open Closed Principle (OCP)
The correct answer is: Dependency-Inversion Principle (DIP)

Correct
3 of 9 2/11/2022, 2:57 AM
Question 8
Correct
Who is bound to assessing the Project’s achievement?
a. The Scrum Master

b. The Product Owner
c. The Delivery Manager
d. The Development Team
e. The Scrum Team
The correct answer is: The Product Owner

Correct
Question 9
Correct
What dose "O" means in SOLID?
a. Open Close Principle

b. Open Open Principle
c. Open Correct Principle
d. Open Extend Principle
The correct answer is: Open Close Principle

Correct
4 of 9 2/11/2022, 2:57 AM
Question 10
Correct
b. moderately time-consuming
c. critical time-consuming
d. most time-consuming

Correct
Question 11
Correct
An individual who plans and directs the work.
a. Project manager
b. Programmer
c. Team leader
d. Stakeholder
The correct answer is: Project manager

Correct
Question 12
Correct
a. Complaints about CASE tools

b. Organisational gossip
c. Good availability of IT Jobs in the socio-economic condition
d. Lack of requirements change requests from customers
Correct
5 of 9 2/11/2022, 2:57 AM
Question 13
Correct
a. Liskov Substitute Principle (LSP)

b. Single Responsibility Principle (SRP)
c. Dependency – Inversion Principle (DIP)
d. Interface Segregation Principle (ISP)
e. All of the options are true
f. Open Closed Principle (OCP)

Correct
Question 14
Correct
In the waterfall model, in what phase is the project team most likely to spend a lot of time?
a. Deployment Phase
b. Implementation Phase
c. Verification Phase
d. Requirements Phase
The correct answer is: Requirements Phase

Correct
6 of 9 2/11/2022, 2:57 AM
Question 15
Correct
Full form of OCP ______
a. Open Clone Principle

b. Open Cline Principle
c. Open Close Principle
d. Open Class Principle

Correct
Question 16
Correct
Open Closed Principle (OCP) states
a. Open for both extension and modification

b. Open for modification but closed for extension
c. All the options are true
d. An entity allow to be extended without modifying its source code
The correct answer is: An entity allow to be extended without modifying its source code
Correct
Question 17
Correct
a. No report on technology problems from the developers

b. Demands for higher-powered workstations
d. Many requirements change requests from customers
Correct
7 of 9 2/11/2022, 2:57 AM
Question 18
Correct
Which of the following is not a Major type of Risk for IT projects?
a. Recruitment problems
b. Case tools' inefficiency
c. Organizational restructuring
d. Verification and validation problems
The correct answer is: Verification and validation problems

Correct
Question 19
Correct
Typically the Probability that Customers fail to understand the impact of requirements changes is ________ and its impact on the ongoing
IT project is _________
a. moderate, insignificant
b. moderate, tolerable
c. high, tolerable
d. high, catastrophic
The correct answer is: moderate, tolerable

Correct
Question 20
Correct
Increment List Contain ________
a. Product Backlog
b. Sprint requirement complete list
c. Sprint requirement incomplete List
d. Sprint Backlog
The correct answer is: Sprint requirement complete list

Correct
8 of 9 2/11/2022, 2:57 AM
◄ Announcements
Jump to...
9 of 9 2/11/2022, 2:57 AM

State Finished
Marks 16.00/20.00
Grade 8.00 out of 10.00 (80%)
Question 1
Correct
In which principle we can split the interface.

b. Open Closed Principle
d. Single Responsibility Principle
Correct
Question 2
Correct
a. Konrad Zuse
b. Dennis Ritchie
c. Robert C. Martin
d. John Backus
Correct
Question 3
Correct
b. most time-consuming
d. moderately time-consuming
Correct
Question 4
Correct
_________ is Probably the most time-consuming activity of project management.
a. Project monitoring and reviews

b. Personnel selection and evaluation
c. Project Verification and Validation
d. Project Planning
Correct
Question 5
Correct
In dependency inversion principle _________ should not depend on details.
a. Abstructions
b. None of them
c. Modules
d. Details

Correct
Question 6
Correct
The milestone document related to Requirements Specification is ________
a. NONE of the answer options is true

b. User requirements
c. Evaluation report
d. Architectural design
Correct
Question 7
Correct
In a typical IT project, the Probability that Computer-Aided Software Engineering (CASE) tools cannot be integrated is usually ______ and its
effects are _________
a. low, catastrophic
c. high, tolerable
d. low, insignificant
Correct
Question 8
Correct
In the spiral model, at what phase do customers evaluate the project?
a. Planning Phase
b. Customer Feedback Phase
c. Risk Analysis Phase
d. Evaluation Phase
The correct answer is: Evaluation Phase
Correct
Question 9
Correct
The main reason behind the use of V-model in the medical development field is _______
a. Strictly a disciplined domain

b. Technology is not dynamic
c. Ambiguous or undefined requirements
d. The project is short
The correct answer is: Strictly a disciplined domain
Correct
Question 10
Correct
a. Work breakdown
b. Conclusion
c. Requirements analysis procedure

Correct
Question 11
Correct
SOLID stands for ________ basic principles of object oriented programming and design.
a. Three
b. Five
c. Four
d. Six
The correct answer is: Five
Correct
Question 12
Correct
a. Maintenance plan
b. Validation plan
d. Quality plan
Correct
Question 13
Correct
RAD model is mainly based on
a. incremental development
b. Sequential development
c. Agile development
d. Iterative development
The correct answer is: Iterative development

Correct
Question 14
Correct
An individual who plans and directs the work.
a. Stakeholder
b. Project manager
c. Programmer
d. Team leader
The correct answer is: Project manager
Correct
Question 15
Correct
In the web development domain which software prototyping is used in the industry?
a. Extreme Prototyping
b. Incremental Prototyping
c. Evolutionary Prototyping
d. Throwaway/Rapid Prototyping
The correct answer is: Extreme Prototyping
Correct
Question 16
Correct
Which two of the following are the goals of Transition phase?
a. Define quality attributes; Identifying critical risks

b. Refine the Risk Assessment; Create an executable architectural baseline
c. Establishing feasibility; Conduct a post project review
d. Correct defects; Provide user consultancy
The correct answer is: Correct defects; Provide user consultancy

Correct
Question 17
Correct
Phone call dial up or send SMS is an example of _________
a. Interface segregation principle

b. Single responsibility principle
c. Liskov Substitution Principle
d. Open Closed principle
The correct answer is: Single responsibility principle
Correct
Question 18
Correct
Class design principle is used to be known as ________
a. SOLID
b. SRP
c. Abstraction
d. Modeling
The correct answer is: SOLID
Correct
Question 19
Correct
Which one of the following models is not suitable for accommodating any change?
a. RAD Model
b. Waterfall Model
c. Build & Fix Model
d. Prototyping Model
The correct answer is: Waterfall Model

Correct
Question 20
Correct
Which of the following is not a Valid type of project plan?
a. Quality plan
b. Staff development plan
c. Verification plan
d. Maintenance plan
The correct answer is: Verification plan
Correct
◄ Announcements
Jump to...


State Finished
Marks 14.00/20.00
Grade 7.00 out of 10.00 (70%)
Question 1
Correct
a. The validation procedure

b. The work breakdown
c. The resources available to the project
d. A schedule for the work
Correct
Question 2
Correct
Reorganizastion of teams with more joins and intersections could be a possible strategy to deal with _______
a. Recruitment problems
b. Underestimated development time
c. Organisational financial problems
d. Staff sickness
The correct answer is: Staff sickness
Correct
Question 3
Correct
Correct
Question 4
Correct
'Agility' means-
a. effective response to change.

b. All of them
c. effective communication.
d. emphasize an incremental delivery strategy.
The correct answer is: All of them
Correct
Question 5
Correct
The Module design is also referring as __________ in software development process.
a. System design
b. Low level design
c. All of them
d. High Level design
The correct answer is: Low level design

Correct

Question 6
Correct
Which one isn’t true about Liskov Substitution Principle (LSP)?
a. Behavioral subtyping is a character of LSP

b. All the answer options are OK
c. LSP introduced by Barbara Liskov
d. Correctness is a character of LSP
Correct
Question 7
Correct
Why we use SOLID principles?
a. To avoid bad design

b. Small changes result in bugs
c. For flexible coding
Correct
Question 8
Correct
a. Quality plan
b. Validation plan
c. Maintenance plan

Correct

Question 9
Correct
Which of the following activities of a Generic Process framework provides a feedback report?
a. Deployment
b. Communication
c. Modeling & Construction
d. Planning
The correct answer is: Deployment
Correct
Question 10
Correct

c. Project Planning
d. Project Verification and Validation
Correct
Question 11
Correct

b. Lack of requirements change requests from customers
Correct

Question 12
Correct
The component-based development model is______
a. Not able to support the development of reusable components.

b. Only appropriate for computer hardware design.
c. Not cost effective by known quantifiable software metrics.
d. Works best when object technologies are available for support.
The correct answer is: Works best when object technologies are available for support.
Correct
Question 13
Correct
a. ISO/IEC 12206
b. ISO/IEC 12207
c. ISO/IEC 12208
d. ISO/IEC 12209
Correct
Question 14
Correct
a. An entity allow to be extended without modifying its source code

b. All the options are true
c. Open for both extension and modification
d. Open for modification but closed for extension
Correct

Question 15
Correct
a. All the answer options are OK

b. Maintainability
d. Testability
Correct
Question 16
Correct
Scrum model Consists how many Role?
a. Five
b. Seven
c. Nine
d. Three
The correct answer is: Three
Correct
Question 17
Correct
In which principle software entities should be open for extension but closed for modification.

b. Interface Segregation Principle
c. Open Closed Principle
The correct answer is: Open Closed Principle

Correct

Question 18
Correct
a. Under-estimation of product size, cost and time

b. Un-availability of Required Training for Staff
c. Sickness of Key Staff
d. Over-estimation of product size, cost and time
The correct answer is: Over-estimation of product size, cost and time
Correct
Question 19
Correct
a. OneTimeCustomer can be replaced with RegularCustomer

b. We can instantiate objects of ICust
c. RegularCustomer can be replaced with OneTimeCustomer
d. ICust can be replaced with RegularCustomer
Correct
Question 20
Correct
Which statement is true for Spiral Model?
a. Suitable for all projects having low-to-high risks

b. Small number of intermediate stages
c. All of options are true
d. Requirements may be complex and ambigous
The correct answer is: Requirements may be complex and ambigous
Correct
◄ Announcements
Jump to...

State Finished
Marks 16.33/20.00
Grade 8.17 out of 10.00 (82%)
Question 1
Correct
Build & Fix Model is suitable for programming exercises of ___________ LOC (Line of Code).
a. 400-1000
b. 200-400
c. above 1000
d. 100-200
The correct answer is: 100-200
Correct
Question 2
Correct
a. Interface Segregation Principle (ISP)

b. Dependency – Inversion Principle (DIP)
c. Liskov Substitute Principle (LSP)
d. Single Responsibility Principle (SRP)
e. Open Closed Principle (OCP)
f. All of the options are true
Correct
Question 3
Correct
What are the disadvantages of SOILD principles?
a. SOLID leads to simple code

b. SOLID is a marketing Gimmick
c. SOLID principles are unambiguous
d. SOLID is too realistic
The correct answer is: SOLID is a marketing Gimmick
Correct
Question 4
Correct
In the spiral model, at what phase do customers evaluate the project?
a. Risk Analysis Phase

b. Evaluation Phase
c. Planning Phase
d. Customer Feedback Phase
The correct answer is: Evaluation Phase
Correct
Question 5
Correct
The Software program that is outdated or obsolete is termed as
a. engineering application
b. legacy application
c. open source application
d. embedded application
The correct answer is: legacy application

Correct
Question 6
Correct
a. SPR should have only one responsibility

c. Describe certain properties that a class should have
Correct
Question 7
Correct
Which state identifies the risk association of the project?
a. Requirement Analysis
b. Designing the product
c. Building the product
d. Defining requirement
The correct answer is: Requirement Analysis
Correct
Question 8
Correct
Software entities should be open for extension but closed for____?
a. ModifY
b. Development
c. Correction
d. Modification
The correct answer is: Modification

Correct
Question 9
Correct
a. Monitoring plan
b. Quality plan
c. Validation plan
d. Maintenance plan
Correct
Question 10
Correct
The milestone document related to Prototype Development is ________
a. NONE of the answer options is true

c. System requirements
d. Evaluation report
The correct answer is: Evaluation report
Correct
Question 11
Correct
In RAD model at what phase the attributes of all data sets are identified and defined
a. Business modeling
b. Data modeling
c. Process modelling
d. Application generation
The correct answer is: Data modeling

Correct
Question 12
Correct
a. Agile
b. Big Bang
c. Waterfall
d. RAD
Correct
Question 13
Correct
Which of the following is not a Component of the Project Plan Structure?
a. Hardware and software resource requirements

c. Schedule breakdown
d. Introduction
The correct answer is: Schedule breakdown
Correct
Question 14
Correct

b. User requirements

Correct
Question 15
Correct
Consider the following Steps: (i) Interface Segregation Principle (ii) Open Closed Principle (iii) Dependency-Inversion Principle (iv)
Parsimonious Complexity Principle. Which of the following is not one of the four principles used to guide component-level design?

b. ii.
c. iv.
d. i.
e. iii.
The correct answer is: iv.
Correct
Question 16
Correct
Which of the following is not a Major Component of the Project Plan Structure?
a. Resource monitoring and reporting

b. Introduction
c. Work breakdown
d. Project organisation
The correct answer is: Resource monitoring and reporting

Correct
Question 17
Correct
Methodology in which project management processes were step-by step.
a. Incremental
b. Prototyping
c. Spiral
d. Waterfall
The correct answer is: Waterfall
Correct
Question 18
Correct
a. critical time-consuming
c. least time-consuming
Correct
Question 19
Correct
Typically the Probability that Customers fail to understand the impact of requirements changes is ________ and its impact on the ongoing IT
project is _________
a. moderate, tolerable
b. moderate, insignificant
c. high, tolerable

Correct
Question 20
Correct

b. Interface Segregation Principle
c. Open Closed Principle
Correct
◄ Announcements
Jump to...

State Finished
Time taken 50 mins
Marks 14.67/20.00
Grade 7.33 out of 10.00 (73%)
Question 1
Correct
A well design agile process may ______ the cost of change curve.
a. Flatten.
b. make uneven
c. roughen.
d. All of them.
The correct answer is: Flatten.
Correct
Question 2
Correct
Scrum framework develop in _________
a. Early 2000
b. Early 1995
c. Early 1985
d. Early 1990
The correct answer is: Early 1990
Correct
https://mscourses.gnomio.com/mod/quiz/review.php?attempt=2900&cmid=151#question-2912-8 1/8
Question 3
Correct

b. An entity allow to be extended without modifying its source code
d. Open for modification but closed for extension
Correct
Question 4
Correct
RAD model is mainly based on
a. incremental development
b. Agile development
c. Iterative development
d. Sequential development
The correct answer is: Iterative development
Correct
Question 5
Correct
SOLID stands for ________ basic principles of object oriented programming and design.
a. Three
b. Six
c. Five
d. Four
The correct answer is: Five

Correct

Question 6
Correct
Which process model is applicable to only large and bulky software development projects.
a. Spiral Model
b. Iterative Model
c. V Model
d. Waterfall Model
The correct answer is: Iterative Model
Correct
Question 7
Correct
a. Maintenance plan
b. Monitoring plan
c. Validation plan
d. Quality plan
Correct
Question 8
Correct
Usually the Probability of defects in reusable software components is ________ and its impact on the ongoing IT project is _________
b. moderate, serious
c. high, tolerable
d. low, catastrophic

Correct

Question 9
Correct
a. Underestimated development time

b. Recruitment problems
c. Organisational financial problems
Correct
Question 10
Correct
a. Abstructions
b. Modules
c. None of them
d. Details
Correct
Question 11
Correct
a. Open Closed Principle

b. Interface Segregation Principle

Correct

Question 12
Correct
a. The work breakdown

b. A schedule for the work
c. The validation procedure
d. The resources available to the project
Correct
Question 13
Not answered
Which option is true for prototyping model?
a. Follows an evolutionary and iterative approach.

b. Work flow is in a linear fashion.
c. Iterative in nature; focuses on an operational product with each increment.
d. The activities may be linear, incremental or evolutionary.
The correct answer is: Follows an evolutionary and iterative approach.
Question 14
Correct
High level and low level modules both should be dependent on ___________
a. Abstractions
b. Classes
c. All of them
d. Interface

Correct
Question 15
Correct
a. Requirements analysis procedure

b. Work breakdown
c. Validation procedure
d. Conclusion
Correct
Question 16
Correct
In Scrum model Sprint Review events means?
a. Work that to be performed in a Sprint

b. Inspection
c. A time box with in which a releasable
d. An opportunity for the scrum
The correct answer is: Inspection
Correct
Question 17
Correct

Correct

Question 18
Correct
'Agility' means-

b. effective communication.
c. emphasize an incremental delivery strategy.
d. All of them
Correct
Question 19
Correct
By following the SOLID principles a programmer will create a system that is easy to _________ and extend over time.
a. Create
b. Maintain
c. Code
d. Design
The correct answer is: Maintain
Correct
Question 20
Correct
In a typical IT project, the Probability that the cost and size of the software are under-estimated is usually ______ and its impact is _________

Correct

◄ Announcements
Jump to...

State Finished
Marks 12.00/20.00
Grade 6.00 out of 10.00 (60%)
Question 1
Correct
Scrum framework develop in _________
a. Early 1990
b. Early 1995
c. Early 1985
d. Early 2000
The correct answer is: Early 1990
Correct
Question 2
Correct
Product Owner Is?
a. Company
b. None of options are true
c. Particular Person
d. Community People
The correct answer is: Community People
Correct
Question 3
Correct
In a typical IT project, the Probability that the cost and size of the software are under-estimated is usually ______ and its impact is _________
b. low, insignificant
c. high, tolerable
d. moderate, serious
Correct
Question 4
Correct
b. Quality plan
c. Maintenance plan
d. Validation plan
Correct
Question 5
Correct
Which model has a higher emphasis on Risk Analysis?
a. Waterfall Model
b. Spiral Model
c. Increment Model
d. V-model
The correct answer is: Spiral Model

Correct
Question 6
Correct

b. All of the options are true
c. ISP is about business logic to clients communication
d. LSP is about subtyping and inheritance
Correct
Question 7
Correct
Which one of the following is the drawback of Iterative and Incremental SDLC Model?
a. Testing and debugging during smaller iteration is difficult.

b. High amounts of risk and uncertainty.
c. Development is hard to be measured.
d. Additional Management care is required.
The correct answer is: Additional Management care is required.
Correct
Question 8
Correct
Which statement is not explain waterfall model
a. Management is easy resultant model have rigidity functionality. Each phase has specific region of working, deliverables and review
process.
b. Very well understood the requirements for smaller projects.
c. Functional additional capability to enhance the product performance at any phase
d. Phases are processed and completed one at a time
The correct answer is: Functional additional capability to enhance the product performance at any phase
Correct
Question 9
Correct
a. Organisational financial problems

b. Underestimated development time
c. Recruitment problems

Correct
Question 10
Correct
a. moderate, serious
c. high, tolerable
Correct
Question 11
Correct
b. least time-consuming
Correct
Question 12
Correct
a. Child class can be substituted by parent class

b. Parent class cannot be substituted by child class
c. Parent class can be substituted by child class
d. No classes can be replaced by each other
Correct
Question 13
Correct
a. Architectural design
b. Evaluation report
c. User requirements
d. NONE of the answer options is true
Correct
Question 14
Correct
How many phases of ASD in Agile Model?
a. 5
b. 2
c. 4
d. 3
The correct answer is: 3
Correct
Question 15
Correct
Which term is best defined by the text? "A class should not force any client to implement an interface that is irrelevant to them."
a. Interface Segregation Principle

b. Open-Closed Principle
c. Single-Responsibility Principle
d. Dependency Inversion Principle
e. Liskov Substitution Principle
Correct
Question 16
Correct
a. Increases dependencies in software development

b. Creates a complex system
c. Makes the code more extendable,logical & easier
d. Makes the code more complicated
Correct
Question 17
Correct
a. The work breakdown

b. The resources available to the project
c. A schedule for the work
d. The validation procedure
Correct
Question 18
Correct
Which model an extension of the waterfall model and is based on the association of a testing phase for each corresponding development
stage?
a. Agile Model
b. V Model
c. Spiral Model
d. Prototype Model
The correct answer is: V Model
Correct
Question 19
Correct

b. iii.
c. ii.
d. i.
e. iv.
Correct
Question 20
Correct
Software entities should be open for extension but closed for____?
a. Correction
b. Development
c. Modification
d. ModifY
The correct answer is: Modification

Correct
◄ Announcements
Jump to...

State Finished
Marks 17.33/20.00
Grade 8.67 out of 10.00 (87%)
Question 1
Correct
Agile model is the combination of ____ and ____ process models.
a. Spiral and Incremental

b. Waterfall and Incremental
c. Iterative and Incremental
d. Big Bang and Incremental
The correct answer is: Iterative and Incremental
Correct
Question 2
Correct
Agile model advantage are__?
a. Gives flexibility to developers

b. Functionality can be developed rapidly and demonstrated
c. Little or no planning required
d. All of the answer options are correct
The correct answer is: All of the answer options are correct
Correct
Question 3
Correct
a. Validation plan
b. Maintenance plan
d. Quality plan
Correct
Question 4
Correct
a. Schedule breakdown
b. Verification requirements
c. Introduction
The correct answer is: Introduction
Correct
Question 5
Correct
a. SRP
b. Abstraction
c. SOLID
d. Modeling

Correct

Question 6
Correct
a. Work breakdown
b. Validation procedure
d. Conclusion
Correct
Question 7
Correct
a. most time-consuming
Correct
Question 8
Correct
RAD projects have _ teams comprising developers & other resources
a. Separate
b. Large
c. All options are ok
d. Small
The correct answer is: Small

Correct

Question 9
Correct
Which model an extension of the waterfall model and is based on the association of a testing phase for each corresponding development
stage?
a. Spiral Model
b. V Model
c. Prototype Model
d. Agile Model
The correct answer is: V Model

Correct
Question 10
Correct

Correct
Question 11
Correct
Which one is the first or preliminary form of Evolutionary Process Model?
a. Spiral Model
b. Discontinuous Model
c. Waterfall Model
d. Prototyping Model
The correct answer is: Prototyping Model
Correct
Question 12
Correct
Which of the following is not a Major Management Activity?
a. Proposal writing
b. Project Validation
c. Personnel selection and evaluation
d. Project costing
The correct answer is: Project Validation
Correct
Question 13
Correct
a. Dependency Inversion Principle

b. Open-Closed Principle
d. Single-Responsibility Principle
Correct
Question 14
Correct

d. Personnel selection and evaluation

Correct
Question 15
Correct
a. All the options are true

b. Open for both extension and modification
c. Open for modification but closed for extension
d. An entity allow to be extended without modifying its source code
Correct
Question 16
Correct
Compared to RAD, the changes in software in traditional SDLC is
a. None of the options are ok

b. Frequent
c. Rigid
d. Easy
The correct answer is: Rigid
Correct
Question 17
Correct
In RAD model at what phase the attributes of all data sets are identified and defined
a. Data modeling
b. Business modeling
c. Process modelling
d. Application generation
The correct answer is: Data modeling

Correct

Question 18
Correct
Which of the following are benefits of using Single Responsibility Principle ?
a. Difficult for other developers to understand the class or function

b. Software entities are open for extension
c. Reduced coupling & understandable codes
d. Difficult for other developers to change the class or function
The correct answer is: Reduced coupling & understandable codes
Correct
Question 19
Correct
a. All of the options are true

b. Liskov Substitute Principle (LSP)
c. Open Closed Principle (OCP)
d. Dependency – Inversion Principle (DIP)
e. Interface Segregation Principle (ISP)
f. Single Responsibility Principle (SRP)
Correct
Question 20
Correct
a. Schedule breakdown
c. Introduction
d. Hardware and software resource requirements
Correct
◄ Announcements
Jump to...
Started on Friday, 11 February 2022, 4:06 PM

State Finished
Completed on Friday, 11 February 2022, 4:56 PM
Marks 14.67/20.00
Grade 7.33 out of 10.00 (73%)
Question 1
Incorrect
a. Monitoring plan
b. Maintenance plan
c. Quality plan
d. Validation plan 
Incorrect
Question 2
Correct
Method that focuses primarily on people and their interactions when working on a project rather than on processes and tools is____
a. Dynamic Systems Development Method

b. Scrum Method
c. Feature Driven Development Method
d. Unified Process Method
e. Crystal Method
The correct answer is: Crystal Method

Correct
Question 3
Correct

c. Interface segregation principle
Correct
Question 4
Correct
Which one is the most popular Agile model framework?
a. Extreme Programming
b. Unified Rational Process
c. Kanban
d. Scrum
The correct answer is: Scrum
Correct
Question 5
Correct
We call Prescriptive Process Model 'prescriptive' because they prescribe a set of process_______.
a. Single framework activity

b. Design framework activity
c. Launch framework activity
d. Element framework activities
The correct answer is: Element framework activities

Correct
Question 6
Correct
a. Organisational gossip
d. Lack of requirements change requests from customers
Correct
Question 7
Correct
Which of the following activities of a Generic Process framework provides a feedback report?
a. Planning
b. Deployment
c. Modeling & Construction
d. Communication
The correct answer is: Deployment
Correct
Question 8
Correct
a. Case tools' inefficiency

c. Verification and validation problems
d. Organizational restructuring

Correct
Question 9
Correct

c. An entity allow to be extended without modifying its source code
d. All the options are true
Correct
Question 10
Incorrect
a. The Scrum Master

b. The Development Team
c. The Product Owner
d. The Scrum Team 
e. The Delivery Manager

Incorrect
Question 11
Correct
a. Schedule breakdown
b. Hardware and software resource requirements
c. Introduction
d. Project organisation
Correct
Question 12
Correct
d. critical time-consuming
Correct
Question 13
Correct
a. Classes
b. Abstractions
c. All of them
d. Interface

Correct
Question 14
Correct
a. RegularCustomer can be replaced with OneTimeCustomer

b. ICust can be replaced with RegularCustomer
c. OneTimeCustomer can be replaced with RegularCustomer
d. We can instantiate objects of ICust

Correct
Question 15
Correct
Which of the following is not unique characteristics of Software Projects?
a. Often the software project is one-time project

b. The end product is not tangible
c. Many aspects of the software development process is not standardized
d. It usually requires diverse risk managgement strategies
The correct answer is: It usually requires diverse risk managgement strategies
Correct
Question 16
Correct
In the web development domain which software prototyping is used in the industry?
a. Incremental Prototyping
b. Evolutionary Prototyping
c. Throwaway/Rapid Prototyping
d. Extreme Prototyping
The correct answer is: Extreme Prototyping
Correct
Question 17
Correct
a. SPR should have only one responsibility

c. Describe certain properties that a class should have
Correct
Question 18
Correct
b. high, tolerable
c. high, catastrophic
d. moderate, tolerable

Correct
Question 19
Correct
In the spiral model ‘Risk Analysis’ is performed __
a. in the third loop

b. in the first loop
c. in every loop
d. none of these
The correct answer is: in every loop
Correct
Question 20
Correct
a. Abstructions
b. Modules
c. None of them
d. Details
Correct
◄ Announcements
Jump to...

State Finished
Marks 13.33/20.00
Grade 6.67 out of 10.00 (67%)
Question 1 High level module should not depend on low level modules in_____
Correct
Mark 1.00 out of a. Liskov Substitution Principle (LSP)

1.00
b. Dependency-Inversion Principle (DIP) 
c. Open Closed Principle (OCP)
d. Interface Segregation Principle (ISP)
The correct answer is: Dependency-Inversion Principle (DIP)
Correct
Question 2 What dose "O" means in SOLID?

Correct
Mark 1.00 out of a. Open Correct Principle

1.00
b. Open Open Principle
c. Open Close Principle

Correct
Question 3 Which of these is not one of the phase names defined by the Unified Process model for software development?
Correct
Mark 1.00 out of a. Elaboration phase

1.00
b. Inception phase
c. Construction phase
d. Validation phase
Correct
Question 4 _________ is Probably the most time-consuming activity of project management.

Correct
Mark 0.67 out of a. Project Verification and Validation

1.00
b. Project Planning
c. Project monitoring and reviews
d. Personnel selection and evaluation

Correct
Question 5 _________ is an established guideline to develop any software.

Correct
Mark 0.67 out of a. Process Model

1.00
b. Waterfall Model
c. Architecture
d. Agile
The correct answer is: Process Model
Correct
Question 6 Which term is best defined by the text? "A class should not force any client to implement an interface that is irrelevant to
Correct them."
Mark 0.00 out of
1.00
a. Open-Closed Principle
b. Single-Responsibility Principle
c. Dependency Inversion Principle
e. Interface Segregation Principle

Correct
Question 7 Which of the following is not a Component of the Project Plan Structure?
Correct
Mark 0.33 out of a. Project organisation

1.00
b. Schedule breakdown
c. Hardware and software resource requirements
d. Introduction
Correct
Question 8 Which one true about SOLID principles?

Correct
Mark 1.00 out of a. Describe certain properties that a class should have
1.00
b. SPR should have only one responsibility
c. A class should have only one reason to change

Correct
Question 9 Which of the following is not a Major type of project plan?

Correct
Mark 1.00 out of a. Validation plan

1.00
c. Quality plan
d. Maintenance plan
Correct
Question 10 Who is bound to assessing the Project’s achievement?

Correct
Mark 1.00 out of a. The Development Team

1.00
b. The Product Owner
c. The Delivery Manager
d. The Scrum Team
e. The Scrum Master
Correct
Question 11 Usually Project Planning is ___________ activity of project management.

Correct
Mark 1.00 out of a. least time-consuming

1.00
Correct
Question 12 Which statement best describes the Sprint Review?

Correct
Mark 0.33 out of a. It is when the Scrum Team and stakeholders inspect the outcome of the Sprint and figure out what to do in 
1.00
the upcoming Sprint
b. It is used to congratulate the Development Team if it did what it committed to doing,or to punish the
Development Team if it failed to meet its commitments
c. It is a demo at the end of the Sprint for everyone in the organization to providefeedback on the work done
d. It is a review of the team's activities during the Sprint
The correct answer is: It is when the Scrum Team and stakeholders inspect the outcome of the Sprint and figure out what
to do in the upcoming Sprint
Correct
Question 13 Agile Software Development is based on_________________?

Correct
Mark 0.67 out of a. Iterative Development

1.00
b. Linear Development
c. Incremental and Iterative Development
d. Incremental Development
The correct answer is: Incremental and Iterative Development
Correct
Question 14 The milestone document related to Prototype Development is ________

Correct
Mark 0.00 out of a. NONE of the answer options is true

1.00

Correct
Question 15 Which of the following is not a Major Management Activity?

Correct
Mark 0.00 out of a. Proposal writing

1.00
c. Project costing
d. Project Validation
Correct
Question 16 The ___________ model is an SDLC model where we do not follow any specific process and the development just starts with
Correct the required money and efforts.
Mark 0.67 out of
1.00
a. Waterfall
b. Big Bang
c. Prototype
d. None of them
The correct answer is: Big Bang
Correct
Question 17 Which of the following are benefits of using Single Responsibility Principle ?
Correct
Mark 1.00 out of a. Difficult for other developers to understand the class or function
1.00
b. Difficult for other developers to change the class or function
c. Software entities are open for extension
d. Reduced coupling & understandable codes

Correct
Question 18 In dependency inversion principle _________ should not depend on details.

Correct
Mark 1.00 out of a. Details

1.00
b. None of them
c. Modules
d. Abstructions

Correct
Question 19 Usually the Probability of defects in reusable software components is ________ and its impact on the ongoing IT project is
Correct _________
Mark 0.00 out of
1.00
a. moderate, serious
c. high, tolerable

Correct
Question 20 The linear sequential model of software development is also known as the
Correct
Mark 1.00 out of a. Spiral model

1.00
b. Build & Fix Model
c. Incremental Model
d. Classical life cycle model
The correct answer is: Classical life cycle model

Correct
Practice MCQ Test (10 Questions, 20

◄ Announcements Jump to...
minutes) ►

State Finished
Marks 12.00/20.00
Grade 6.00 out of 10.00 (60%)
Question 1
Correct
The main reason behind the use of V-model in the medical development field is _______
a. Technology is not dynamic

b. Ambiguous or undefined requirements
c. The project is short
d. Strictly a disciplined domain
The correct answer is: Strictly a disciplined domain
Correct
Question 2
Correct
a. Open Close Principle

b. Open Correct Principle
c. Open Open Principle
Correct
Question 3
Correct
Investigation on buying-in components could be a possible strategy to deal with _______
a. Risk management
b. Requirements changes
c. Recruitment problems
d. Staff illness
The correct answer is: Recruitment problems
Correct
Question 4
Correct
b. low, catastrophic
c. moderate, serious
Correct
Question 5
Correct
a. User requirements
c. NONE of the answer options is true
d. Evaluation report
Correct
Question 6
Correct
a. All the options are true

c. An entity allow to be extended without modifying its source code
d. Open for both extension and modification
Correct
Question 7
Correct
Method that focuses primarily on people and their interactions when working on a project rather than on processes and tools is____
a. Crystal Method
b. Dynamic Systems Development Method
c. Feature Driven Development Method
d. Unified Process Method
e. Scrum Method
The correct answer is: Crystal Method
Correct
Question 8
Correct
Which one is not exist among the people on an agile team __________
a. competence
b. inclination
c. common focus
d. collaboration
The correct answer is: inclination

Correct
Question 9
Correct

b. Liskov Substitution Principle
c. Single responsibility principle
Correct
Question 10
Correct
a. Parent class cannot be substituted by child class

b. No classes can be replaced by each other
c. Child class can be substituted by parent class
d. Parent class can be substituted by child class
Correct
Question 11
Correct
Which principle allows high level module should not depend on low-level modules.
a. Open closed principle

c. Single Responsibility Principle
d. Dependency Inversion Principle
The correct answer is: Dependency Inversion Principle

Correct
Question 12
Correct
d. least time-consuming
Correct
Question 13
Correct
a. Validation plan
b. Maintenance plan
d. Quality plan
Correct
Question 14
Correct
Why the transfer of technology to new team members may be quite challenging in Agile method?
a. Lack of documentation
b. Suitable for dynamic changing
c. Depends heavily on customer interaction
d. Adaptive model
The correct answer is: Lack of documentation

Correct
Question 15
Correct
How long does each iteration typically last for Agile Model?
a. About two to three weeks

b. About one to three weeks
c. About one to Four weeks
d. About two to six weeks
The correct answer is: About one to three weeks
Correct
Question 16
Correct
a. Abstructions
b. Details
c. Modules
d. None of them
Correct
Question 17
Correct
a. It usually requires diverse risk managgement strategies

c. Often the software project is one-time project
d. Many aspects of the software development process is not standardized
Correct
Question 18
Correct
In RAD model, which one of the following is true in term of prototyping?
a. Porotypes developed are reusable

b. No prototyping required
c. Prototype is developed for once only
d. Prototypes developed are not reusable
The correct answer is: Porotypes developed are reusable
Correct
Question 19
Correct
a. ISO/IEC 12208
b. ISO/IEC 12209
c. ISO/IEC 12207
d. ISO/IEC 12206
Correct
Question 20
Correct
a. Project organisation
b. Introduction
c. Schedule breakdown
d. Hardware and software resource requirements

Correct
◄ Announcements
Jump to...

State Finished
Marks 13.67/20.00
Grade 6.83 out of 10.00 (68%)
Question 1
Correct
a. Single Responsibility Principle

d. Open Closed Principle
Correct
Question 2
Correct
Which statement is true for Spiral Model?
a. All of options are true

b. Small number of intermediate stages
c. Suitable for all projects having low-to-high risks
d. Requirements may be complex and ambigous
The correct answer is: Requirements may be complex and ambigous
Correct
Question 3
Correct
a. The resources available to the project

c. The work breakdown
d. A schedule for the work
Correct
Question 4
Correct
a. Create
b. Code
c. Design
d. Maintain
Correct
Question 5
Correct
a. Conclusion
c. Validation procedure
d. Requirements analysis procedure

Correct
Question 6
Correct
The output of development phase will be input of which phase in waterfall model?
a. Testing
b. Implementation
c. Maintenance
d. Design
The correct answer is: Testing
Correct
Question 7
Correct
What are the advantages of maintaining consistent iteration (timebox) lengths throughout the project?
a. They provide a consistent means of measuring team velocity

b. They help to establish a consistent pattern of delivery
c. All the options are true
d. They help the team to objectively measure progress
The correct answer is: All the options are true
Correct
Question 8
Correct
What is the advantage of the Agile Model?
a. Easy to transfer of technology to new team members

b. Gives flexibility to developers
c. Depends less on customer interaction
d. Very low individual dependency
The correct answer is: Gives flexibility to developers

Correct
Question 9
Correct
a. Case tools' inefficiency

c. Verification and validation problems
d. Organizational restructuring
Correct
Question 10
Correct
Component-base development model consists of process steps____
a. Available component-based products are researched and evaluated for the application domain in question
b. All the options are true
c. Comprehensive testing is conducted to ensure proper functionality
d. A software architecture is designed to accommodate the components
Correct
Question 11
Correct
Which of the following are incorrect needs for Component Based Software Development?
a. Less reliable components

b. All of the answer options are correct
c. More extensible system
d. More changeable system
The correct answer is: Less reliable components

Correct
Question 12
Correct
a. Evaluation report
b. System requirements
c. Architectural design
d. NONE of the answer options is true
Correct
Question 13
Correct
b. high, tolerable
c. moderate, tolerable
Correct
Question 14
Correct
a. Open closed principle

b. Dependency Inversion Principle
Correct
Question 15
Correct
a. ii.
b. i.
c. iii.
d. None of the answer options are correct
e. iv.

Correct
Question 16
Correct

b. Single Responsibility Principle
d. Open Closed Principle
Correct
Question 17
Correct
Dependency-Inversion Principle follows _______
a. High-level module should depend on low-level modules. Both should depend on abstractions
b. Details should depend on abstractions.
c. Abstractions should be depend on details. Details should depend on abstractions
d. Abstractions should not depend on details. Details should depend on abstractions
The correct answer is: Abstractions should not depend on details. Details should depend on abstractions
Correct
Question 18
Correct
a. Quality plan
b. Validation plan
c. Maintenance plan

Correct
Question 19
Correct
Correct
Question 20
Correct
a. Single-Responsibility Principle
d. Interface Segregation Principle
e. Open-Closed Principle

Correct
◄ Announcements
Jump to...

State Finished
Marks 15.33/20.00
Grade 7.67 out of 10.00 (77%)
Question 1
Correct
Prototyping Model is used when the requirements are_________
a. well understood.
b. well understood by upper management.
c. not well understood.
d. well understood and risks are high.
The correct answer is: not well understood.
Correct
Question 2
Correct
a. Difficult for other developers to change the class or function

b. Difficult for other developers to understand the class or function
Correct
Question 3
Correct
a. Feature-Driven Development (FDD.

c. Evo
d. Scrum
Correct
Question 4
Correct
Correct
Question 5
Correct
For every iteration which step are not involve in agile SDLC model?
a. Integration Testing
b. Unit and Acceptance Testing
c. Planning and Requirements Analysis
d. Design and Coding
The correct answer is: Integration Testing

Correct
Question 6
Correct
a. Lack of requirements change requests from customers

Correct
Question 7
Correct
The intention principles applied together programmer will create a system _________
a. Not Easy to Maintain and Extend Over Time

b. Easy to Maintain and Not Extend Over Time
c. Not Easy to Maintain and Not Extend Over Time
d. Easy to Maintain and Extend Over Time
The correct answer is: Easy to Maintain and Extend Over Time
Correct
Question 8
Correct

b. Report writing and presentations
c. Project planning and scheduling
d. Project Verification and Validation
The correct answer is: Project Verification and Validation

Correct
Question 9
Correct

Correct
Question 10
Correct
a. Quality plan
c. Maintenance plan
d. Validation plan
Correct
Question 11
Correct
a. For flexible coding

b. To avoid bad design
c. Small changes result in bugs

Correct
Question 12
Correct
a. Classes
b. All of them
c. Interface
d. Abstractions
Correct
Question 13
Correct
The milestone document related to Requirements Analysis is ________
a. System requirements
Correct
Question 14
Correct
a. Design
b. Code
c. Create
d. Maintain

Correct
Question 15
Correct

Correct
Question 16
Correct
a. Implementation Phase
b. Deployment Phase
c. Requirements Phase
d. Verification Phase
Correct
Question 17
Correct
'Agility' means-

b. emphasize an incremental delivery strategy.
c. All of them
d. effective communication.

Correct
Question 18
Correct

d. The work breakdown
Correct
Question 19
Correct
a. Konrad Zuse
b. Dennis Ritchie
d. John Backus
Correct
Question 20
Correct
______________ does not always hold the exact logic used in the actual software application and is an extra effort to be considered under effort
estimation.
a. Prototype
b. Agile
c. RAD
d. Waterfall
The correct answer is: Prototype

Correct
◄ Announcements
Jump to...

State Finished
Marks 15.33/20.00
Grade 7.67 out of 10.00 (77%)
Question 1
Correct
Prototyping Model is used when the requirements are_________
a. well understood.
b. well understood by upper management.
c. not well understood.
d. well understood and risks are high.
The correct answer is: not well understood.
Correct
Question 2
Correct
a. Difficult for other developers to change the class or function

b. Difficult for other developers to understand the class or function
Correct
Question 3
Correct
a. Feature-Driven Development (FDD.

c. Evo
d. Scrum
Correct
Question 4
Correct
Correct
Question 5
Correct
For every iteration which step are not involve in agile SDLC model?
a. Integration Testing
b. Unit and Acceptance Testing
c. Planning and Requirements Analysis
d. Design and Coding
The correct answer is: Integration Testing

Correct
Question 6
Correct
a. Lack of requirements change requests from customers

Correct
Question 7
Correct
The intention principles applied together programmer will create a system _________
a. Not Easy to Maintain and Extend Over Time

b. Easy to Maintain and Not Extend Over Time
c. Not Easy to Maintain and Not Extend Over Time
d. Easy to Maintain and Extend Over Time
The correct answer is: Easy to Maintain and Extend Over Time
Correct
Question 8
Correct

b. Report writing and presentations
c. Project planning and scheduling
d. Project Verification and Validation

Correct
Question 9
Correct

Correct
Question 10
Correct
a. Quality plan
c. Maintenance plan
d. Validation plan
Correct
Question 11
Correct
a. For flexible coding

b. To avoid bad design

Correct
Question 12
Correct
a. Classes
b. All of them
c. Interface
d. Abstractions
Correct
Question 13
Correct
a. System requirements
Correct
Question 14
Correct
a. Design
b. Code
c. Create
d. Maintain

Correct
Question 15
Correct

Correct
Question 16
Correct
a. Implementation Phase
b. Deployment Phase
c. Requirements Phase
d. Verification Phase
Correct
Question 17
Correct
'Agility' means-

b. emphasize an incremental delivery strategy.
c. All of them
d. effective communication.

Correct
Question 18
Correct

Correct
Question 19
Correct
a. Konrad Zuse
b. Dennis Ritchie
d. John Backus
Correct
Question 20
Correct
______________ does not always hold the exact logic used in the actual software application and is an extra effort to be considered under effort
estimation.
a. Prototype
b. Agile
c. RAD
d. Waterfall
The correct answer is: Prototype

Correct
◄ Announcements
Jump to...

State Finished
Marks 15.33/20.00
Grade 7.67 out of 10.00 (77%)
Question 1
Correct

b. Project Validation
c. Project costing
d. Proposal writing
Correct
Question 2
Correct
a. Code
b. Design
c. Create
d. Maintain
Correct
Question 3
Correct
Which phase of Prototype Model focuses on a representation of those aspects of software that will be visible to end user?
a. Deployment
b. Quick design
c. Communication
d. Construction of Prototype
Correct
Question 4
Correct

b. An entity allow to be extended without modifying its source code
c. Open for modification but closed for extension
d. All the options are true
Correct
Question 5
Correct
a. Classes
b. Abstractions
c. Interface
d. All of them

Correct
Question 6
Correct
In which process of software development the requirements are broken down into multiple standalone modules of software development
cycle?
a. Waterfall Model
b. Incremental Process Model
c. RAD Model
d. Evolutionary Process Model
The correct answer is: Incremental Process Model

Correct
Question 7
Correct

b. Single Responsibility Principle
c. Open Closed Principle
d. Interface Segregation Principle
Correct
Question 8
Correct
a. Maintenance plan
c. Validation plan
d. Quality plan
Correct
Question 9
Correct
a. ISP is about business logic to clients communication

b. LSP is about subtyping and inheritance
c. All of the options are true
d. OCP is about class design and feature extensions
Correct
Question 10
Correct
According to Agile manifesto what carries more value?
a. Individuals and interactions over projects and tools.

b. Individuals and interactions over processes and tools.
c. Individuals and interactions over products and tools.
d. Individuals and interactions over people and technique.
The correct answer is: Individuals and interactions over processes and tools.
Correct
Question 11
Correct
Which is not a characteristic of Waterfall Model?
a. Difficult to measure progress within stages

b. Process and results are well documented
c. Requires early user involvement in the system development effort
d. Each phase has specific deliverables and a review process
The correct answer is: Requires early user involvement in the system development effort
Correct
Question 12
Correct
Scrum Master is a "management" position.
a. True
b. False
Correct
Question 13
Correct
b. high, tolerable
d. moderate, serious

Correct
Question 14
Correct
a. Open Extend Principle

b. Open Close Principle
c. Open Open Principle
d. Open Correct Principle
Correct
Question 15
Correct
b. Quality plan
c. Validation plan
d. Maintenance plan
Correct
Question 16
Correct

Correct
Question 17
Correct

d. Project monitoring and reviews
Correct
Question 18
Correct
Identify the disadvantage of the Spiral Model.
a. Management is more complex.

b. Spiral may go on indefinitely.
c. Doesn’t work well for smaller projects.
d. All are correct.
The correct answer is: All are correct.
Correct
Question 19
Correct
Prototyping model follows an ______ and ______ approach.
a. Evolutionary, iterative.
b. Inefficient, evolutionary.
c. None of above.
d. iterative, inefficient.
The correct answer is: Evolutionary, iterative.

Correct
Question 20
Correct
a. The resources available to the project

c. A schedule for the work
Correct
◄ Announcements
Jump to...

State Finished
Marks 13.00/20.00
Grade 6.50 out of 10.00 (65%)
Question 1
Incorrect
Which phase of waterfall model take maximum time?
a. Design phase
b. Development phase
c. Requirement gathering and analysis phase
d. Testing phase 
The correct answer is: Design phase
Incorrect
Question 2
Incorrect
a. Difficult for other developers to understand the class or function

b. Software entities are open for extension 
c. Reduced coupling & understandable codes
d. Difficult for other developers to change the class or function
Incorrect
Question 3
Incorrect
a. User requirements 
b. NONE of the answer options is true
Incorrect
Question 4
Correct
Correct
Question 5
Correct

b. Many aspects of the software development process is not standardized
c. It usually requires diverse risk managgement strategies
d. The end product is not tangible
Correct
Question 6
Incorrect
a. Maintenance plan
b. Monitoring plan
c. Validation plan 
d. Quality plan
Incorrect
Question 7
Correct
a. False
b. True
Correct
Question 8
Correct
What two things should be completed before moving on to the next iteration planning begins?
a. an iteration demo and a retrospective

b. a retrospective and the commitment ceremony
c. emergency request and an iteration demo
d. the commitment ceremony and an iteration demo
The correct answer is: an iteration demo and a retrospective

Correct
Question 9
Correct
Which phase of Prototype Model focuses on a representation of those aspects of software that will be visible to end user?
a. Construction of Prototype
b. Deployment
c. Quick design
d. Communication
Correct
Question 10
Correct
a. Describe certain properties that a class should have

b. SPR should have only one responsibility
c. A class should have only one reason to change
Correct
Question 11
Correct

b. iii.
c. ii.
d. i.
e. iv.
Correct
Question 12
Correct
Developers often make implementation compromises to get the software running quickly. For example:
a. Operating system choice.

b. All of them
c. User interface.
d. Language choice.

Correct
Question 13
Incorrect
a. high, catastrophic
b. high, tolerable
c. moderate, tolerable
d. moderate, insignificant 

Incorrect
Question 14
Correct
a. Testability
b. Maintainability
Correct
Question 15
Incorrect
a. Validation plan 
b. Quality plan
c. Monitoring plan
d. Maintenance plan
Incorrect
Question 16
Incorrect
Which of the following life cycle model can be chosen if the development team has less experience on similar projects?
a. Waterfall Model
b. Iterative Enhancement Model
c. RAD Model 
d. Spiral Model
The correct answer is: Spiral Model
Incorrect
Question 17
Correct
a. Quality plan
b. Maintenance plan
c. Verification plan
d. Staff development plan

Correct
Question 18
Correct
What are the disadvantages of SOILD principles?
a. SOLID principles are unambiguous

b. SOLID is a marketing Gimmick
c. SOLID is too realistic
d. SOLID leads to simple code
The correct answer is: SOLID is a marketing Gimmick
Correct
Question 19
Correct
a. Interface Segregation Principle

c. Open-Closed Principle

Correct
Question 20
Correct
"Maintaining the integrity of the system architecture" is the key issue of____
a. Inception phase
b. Elaboration phase
c. Transition phase
d. Construction phase
The correct answer is: Construction phase
Correct
◄ Announcements
Jump to...


State Finished
Marks 14.67/20.00
Grade 7.33 out of 10.00 (73%)
Question 1
Correct
a. Flexibility and extensibility

b. All the answer options are OK
c. Testability
d. Maintainability

Correct
Question 2
Correct
Which models are iterative and incremental?
a. Formal methods, Waterfall

b. Waterfall, Agile
c. Agile, Unified Process
d. Waterfall, Unified Process
The correct answer is: Agile, Unified Process

Correct
1 of 8 2/11/2022, 4:45 PM
Question 3
Correct
a. Evaluation report
d. NONE of the answer options is true

Correct
Question 4
Correct
a. Single Responsibility Principle

d. Open Closed Principle

Correct
Question 5
Correct
a. An entity allow to be extended without modifying its source code

d. Open for both extension and modification
Correct
2 of 8 2/11/2022, 4:45 PM
Question 6
Correct
____________ testing is the testing at code level and helps eliminate bugs at an early stage.
a. Unit test
b. System test
c. Integration testing
d. Acceptance testing
The correct answer is: Unit test

Correct
Question 7
Correct
How long does each iteration typically last for Agile Model?
a. About two to six weeks

b. About one to three weeks
c. About one to Four weeks
d. About two to three weeks
The correct answer is: About one to three weeks

Correct
Question 8
Correct
c. most time-consuming

Correct
3 of 8 2/11/2022, 4:45 PM
Question 9
Correct

b. Single responsibility principle
c. Open Closed principle

Correct
Question 10
Correct
a. high, tolerable

Correct
Question 11
Correct
Investigation on buying-in components could be a possible strategy to deal with _______
a. Requirements changes
b. Risk management
c. Recruitment problems
d. Staff illness
The correct answer is: Recruitment problems

Correct
4 of 8 2/11/2022, 4:45 PM
Question 12
Correct
a. Validation plan
b. Monitoring plan
c. Quality plan
d. Maintenance plan

Correct
Question 13
Correct
What is the advantage of the Agile Model?
a. Gives flexibility to developers

b. Very low individual dependency
c. Depends less on customer interaction
d. Easy to transfer of technology to new team members
The correct answer is: Gives flexibility to developers

Correct
5 of 8 2/11/2022, 4:45 PM
Question 14
Correct
a. Interface Segregation Principle

e. Open-Closed Principle

Correct
Question 15
Correct

c. Lack of requirements change requests from customers
Correct
6 of 8 2/11/2022, 4:45 PM
Question 16
Correct
Which stage is usually a subset of all the stages as in the modern SDLC models?
a. Testing the product

b. Designing the product
c. Defining requirement
d. Building the product
The correct answer is: Testing the product

Correct
Question 17
Correct
What is the simplest model of software development paradigm?
a. V-model
b. Spiral model
c. Big Bang model
d. Waterfall model
The correct answer is: Waterfall model

Correct
Question 18
Correct
a. Design
b. Code
c. Create
d. Maintain

Correct
7 of 8 2/11/2022, 4:45 PM
Question 19
Correct
For agile model, the only really work product is an operational _______ that is delivered.
a. All of them
b. communication
c. software increment
d. construction
The correct answer is: software increment

Correct
Question 20
Correct

b. Project monitoring and reviews
c. Project Planning
d. Project Verification and Validation

Correct
◄ Announcements
Jump to...
8 of 8 2/11/2022, 4:45 PM
Prototyping model follows an ______ and ______ approach.
a.
None of above.
b.
Inefficient, evolutionary.
c.
iterative, inefficient.
d.
Evolutionary, iterative.
Feedback
The correct answer is: Evolutionary, iterative.
Incorrect
Question 2
Correct
Remove flag
Question text
a.
Project Planning
b.
Project monitoring and reviews
c.
Personnel selection and evaluation
d.
Project Verification and Validation
Feedback
Correct
Question 3
Incorrect
Remove flag
Question text
a.
System requirements
b.
Evaluation report
c.
Architectural design
d.
NONE of the answer options is true
Feedback
Incorrect
Question 4
Correct
Remove flag
Question text
a.
Verification plan
b.
Maintenance plan
c.
Quality plan
d.
Staff development plan
Feedback
Correct
Question 5
Correct
Remove flag
Question text
What are the advantages of maintaining consistent iteration (timebox) lengths throughout
the project?
a.
They help to establish a consistent pattern of delivery
b.
They provide a consistent means of measuring team velocity
c.
All the options are true
d.
They help the team to objectively measure progress
Feedback
Correct
Question 6
Correct
Remove flag
Question text
a.
Single Responsibility Principle
b.
Liskov Substitution Principle
c.
Open closed principle
d.
Dependency Inversion Principle
Feedback
Correct
Question 7
Incorrect
Remove flag
Question text
a.
Many requirements change requests from customers
b.
Good availability of IT Jobs in the socio-economic condition
c.
Demands for higher-powered workstations
d.
No report on technology problems from the developers
Feedback
Incorrect
Question 8
Correct
Remove flag
Question text
a.
False
b.
True
Feedback
Correct
Question 9
Correct
Remove flag
Question text
a.
moderately time-consuming
b.
critical time-consuming
c.
most time-consuming
d.
least time-consuming
Feedback
Correct
Question 10
Correct
Remove flag
Question text
a.
Quality plan
b.
Maintenance plan
c.
Validation plan
d.
Monitoring plan
Feedback
Correct
Question 11
Incorrect
Remove flag
Question text
a.
Good availability of IT Jobs in the socio-economic condition
b.
Complaints about CASE tools
c.
Organisational gossip
d.
Lack of requirements change requests from customers
Feedback
Incorrect
Question 12
Correct
Remove flag
Question text
Which design deals with the implemention part in which it shows a system & it's sub-
systems in the previous two designs?
a.
Architectural Design
b.
Architectural Design & High-level Design
c.
High-level Design
d.
Detailed Design
Feedback
The correct answer is: Detailed Design
Correct
Question 13
Correct
Remove flag
Question text
a.
Agile
b.
RAD
c.
Waterfall
d.
Big Bang
Feedback
Correct
Question 14
Correct
Remove flag
Question text
a.
b.
Single-Responsibility Principle
c.
Dependency Inversion Principle
d.
Interface Segregation Principle
e.
Open-Closed Principle
Feedback
Correct
Question 15
Correct
Remove flag
Question text
a.
Open Closed Principle
b.
c.
Single Responsibility Principle
d.
Interface Segregation Principle
Feedback
Correct
Question 16
Incorrect
Remove flag
Question text
Agile Software Development is based on_________________?
a.
Iterative Development
b.
Incremental Development
c.
Linear Development
d.
Incremental and Iterative Development
Feedback
The correct answer is: Incremental and Iterative Development
Incorrect
Question 17
Correct
Remove flag
Question text
Methodology in which project management processes were step-by step.
a.
Spiral
b.
Incremental
c.
Prototyping
d.
Waterfall
Feedback
The correct answer is: Waterfall
Correct
Question 18
Correct
Remove flag
Question text
a.
Reduced coupling & understandable codes
b.
Difficult for other developers to understand the class or function
c.
Software entities are open for extension
d.
Difficult for other developers to change the class or function
Feedback
Correct
Question 19
Correct
Remove flag
Question text
a.
Maintainability
b.
All the answer options are OK
c.
Testability
d.
Flexibility and extensibility
Feedback
Correct
Question 20
Correct
Remove flag
Question text
a.
Child class can be substituted by parent class
b.
No classes can be replaced by each other
c.
Parent class cannot be substituted by child class
d.
Parent class can be substituted by child class
Feedback
Correct

State Finished
Time taken 50 mins
Marks 10.00/20.00
Grade 5.00 out of 10.00 (50%)
Question 1
Correct
Which of the SDLC model is too close to Iterative process model?
a. All of them.
b. Prototype Model
c. Agile Model
d. RAD Model
The correct answer is: Agile Model
Correct
Question 2
Correct

c. It usually requires diverse risk managgement strategies
d. Many aspects of the software development process is not standardized
Correct
Question 3
Correct
According to Agile manifesto what carries more value?
a. Individuals and interactions over people and technique.

b. Individuals and interactions over processes and tools.
c. Individuals and interactions over projects and tools.
d. Individuals and interactions over products and tools.
The correct answer is: Individuals and interactions over processes and tools.
Correct
Question 4
Correct
Correct
Question 5
Correct
a. To avoid bad design

b. For flexible coding

Correct
Question 6
Correct
What are the Strengths of Spiral model?
a. Spiral may go on sequentially.

b. Management is more easier.
c. Changing requirements can be accommodated.
d. All of these.
The correct answer is: Changing requirements can be accommodated.
Correct
Question 7
Correct
a. SOLID
b. Modeling
c. Abstraction
d. SRP
Correct
Question 8
Correct
Which of these is not one of the phase names defined by the Unified Process model for software development?
a. Inception phase
b. Elaboration phase
c. Validation phase
d. Construction phase

Correct
Question 9
Correct
b. Quality plan
c. Validation plan
d. Maintenance plan
Correct
Question 10
Correct
In which process of software development the requirements are broken down into multiple standalone modules of software development
cycle?
a. Waterfall Model
b. Evolutionary Process Model
c. RAD Model
d. Incremental Process Model
The correct answer is: Incremental Process Model
Correct
Question 11
Correct
a. The Development Team

b. The Delivery Manager
c. The Scrum Master
d. The Product Owner
e. The Scrum Team
Correct
Question 12
Correct
a. Validation procedure
d. Conclusion

Correct
Question 13
Correct

b. System requirements
c. Architectural design
d. Evaluation report
Correct
Question 14
Not answered
a. Robert C. Martin
b. Dennis Ritchie
c. Konrad Zuse
d. John Backus
Question 15
Correct

Correct
Question 16
Correct
a. A class should have only one reason to change

b. Describe certain properties that a class should have
c. SPR should have only one responsibility
Correct
Question 17
Not answered
a. Maintainability
b. Testability
c. All the answer options are OK
d. Flexibility and extensibility
Question 18
Not answered
a. Project planning and scheduling

c. Report writing and presentations
d. Project monitoring and reviews
Question 19
Correct
In RAD model, information gathered in the business modeling phase is reviewed and analyzed to form sets of data objects vital for the
business in________
a. Deployment Modeling
b. Data Modeling
c. Business Modeling
d. Process Modeling
The correct answer is: Data Modeling

Correct
Question 20
Correct
a. All of the options are true

b. LSP is about subtyping and inheritance
c. ISP is about business logic to clients communication
d. OCP is about class design and feature extensions
Correct
◄ Announcements
Jump to...

Combinepdf 1st Term

Uploaded by

Copyright:

Available Formats

Combinepdf 1st Term

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Combinepdf 1st Term

Uploaded by

Copyright:

Available Formats

Agile model advantage are__?

a. Little or no planning required

The correct answer is: Linear Sequential Development

The correct answer is: Validation phase

The correct answer is: moderate, serious

The correct answer is: iv

Which of the following is NOT an indicator of Risk for an IT Project?

Usually Project Planning is _________ activity of project management.

The correct answer is: most time-consuming

Which one is the not the properties of Software Prototype Model?

Which are true about OCP, LSP and ISP?

The correct answer is: All of the options are true

Which of the following is NOT an indicator of Risk for an IT Project?

Who is originator of the term Single Responsibility Principle(SRP)?

The correct answer is: Robert C. Martin

What does Liskov substitution principle specify?

In dependency inversion principle _______ should not depend on details.

The correct answer is: Abstructions

The correct answer is: Validation phase

The milestone document related to Requirements Specification is ______

The correct answer is: NONE of the answer options is true

_______ is Probably the most time-consuming activity of project management.

The correct answer is: Project Planning

Which of the following is not a Major type of project plan?

The correct answer is: Monitoring plan

Started on Friday, 11 February 2022, 10:08 AM

Mark 1.00 out of 1.00

The correct answer is: Resource monitoring and reporting

Mark 1.00 out of 1.00

a. By ensuring the meetings start and end at the proper time

Mark 1.00 out of 1.00

a. None of the answer options are correct

The correct answer is: True

Mark 1.00 out of 1.00

Which of the following is a Component of the Project Plan Structure?

The correct answer is: Work breakdown

Mark 1.00 out of 1.00

Which of the following is NOT an indicator of Risk for an IT Project?

a. Good availability of IT Jobs in the socio-economic condition

Mark 1.00 out of 1.00

Single Responsibility Principle (SRP) features are

The correct answer is: All the answer options are OK

Mark 1.00 out of 1.00

Which one is the international standard of SDLC?

The correct answer is: ISO/IEC 12207

Mark 1.00 out of 1.00

Which are true about OCP, LSP and ISP?

a. LSP is about subtyping and inheritance

The correct answer is: All of the options are true

Mark 0.67 out of 1.00

Client-specific interfaces are better than one general-purpose interface in____

a. Liskov Substitution Principle

The correct answer is: Interface Segregation Principle

Mark 0.33 out of 1.00

Which of the following is not set out by the project plan?

a. A schedule for the work

The correct answer is: The validation procedure

Mark 1.00 out of 1.00

Which Agile methodology advocates the use of problem domain?

The correct answer is: Feature-Driven Development (FDD.

a. Makes the code more extendable,logical & easier