Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
75 views

3a - Getting Started With Arduino and Genuino UNO

This document provides instructions for connecting an Arduino/Genuino Uno board to a computer and uploading a test sketch. It explains how to install the Arduino IDE software, connect the board via USB, ensure the correct drivers are installed, select the board type and serial port in the IDE, and then upload a simple blinking LED sketch to test that the board is working properly.

Uploaded by

Tran Ngoc Hong Quan (K16HL)
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
75 views

3a - Getting Started With Arduino and Genuino UNO

This document provides instructions for connecting an Arduino/Genuino Uno board to a computer and uploading a test sketch. It explains how to install the Arduino IDE software, connect the board via USB, ensure the correct drivers are installed, select the board type and serial port in the IDE, and then upload a simple blinking LED sketch to test that the board is working properly.

Uploaded by

Tran Ngoc Hong Quan (K16HL)
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Getting Started with Arduino and Genuino UNO

This document explains how to connect your Uno board to the computer and upload your first sketch.
The Arduino Uno is programmed using the Arduino Software (IDE), our Integrated Development
Environment common to all our boards and running both online and offline.

Use your Arduino/Genuino Uno on the Arduino Web IDE


All Arduino and Genuino boards, including this one, work out-of-the-box on the
Arduino Web Editor, no need to install anything.

The Arduino Web Editor is hosted online, therefore it will always be up-to-date
with the latest features and support for all boards.

Use your Arduino/Genuino Uno on the Arduino Desktop IDE


If you want to program your Arduino/Genuino Uno while offline you need to install the Arduino Desktop
IDE The Uno is programmed using the Arduino Software (IDE), our Integrated Development Environment
common to all our boards. Before you can move on, you must have installed the Arduino Software (IDE)
on your PC, as explained in the home page of our Getting Started.

Connect your Uno board with an A B USB cable; sometimes this cable is called a USB printer cable

The USB connection with the PC is necessary to program the board and not just to power it up. The Uno
automatically draw power from either the USB or an external power supply. Connect the board to your
computer using the USB cable. The green power LED (labelled PWR) should go on.
Install the board drivers
If you used the Installer, Windows - from XP up to 10 - will install drivers automatically as soon as you
connect your board.

If you downloaded and expanded the Zip package or, for some reason, the board wasn't properly
recognized, please follow the procedure below.

 Click on the Start Menu, and open up the Control Panel.


 While in the Control Panel, navigate to System and Security. Next, click on System. Once the
System window is up, open the Device Manager.

 Look under Ports (COM & LPT). You should see an open port named "Arduino UNO (COMxx)". If
there is no COM & LPT section, look under "Other Devices" for "Unknown Device".
 Right click on the "Arduino UNO (COmxx)" port and choose the "Update Driver Software"
option.
 Next, choose the "Browse my computer for Driver software" option.
 Finally, navigate to and select the driver file named "arduino.inf", located in the "Drivers" folder
of the Arduino Software download (not the "FTDI USB Drivers" sub-directory). If you are using an
old version of the IDE (1.0.3 or older), choose the Uno driver file named "Arduino UNO.inf"
 Windows will finish up the driver installation from there.
Open your first sketch
Open the LED blink example sketch: File > Examples >01.Basics > Blink.
Select your board type and port
You'll need to select the entry in the Tools > Board menu that corresponds to your Arduino or Genuino
board.

Select the serial device of the board from the Tools | Serial Port menu. This is likely to be COM3 or
higher (COM1 and COM2 are usually reserved for hardware serial ports). To find out, you can disconnect
your board and re-open the menu; the entry that disappears should be the Arduino or Genuino board.
Reconnect the board and select that serial port.

Upload the program


Now, simply click the "Upload" button in the environment. Wait a few seconds - you should see the RX
and TX leds on the board flashing. If the upload is successful, the message "Done uploading." will appear
in the status bar.

A few seconds after the upload finishes, you should see the pin 13 (L) LED on the board start to blink (in
orange). If it does, congratulations! You've gotten Arduino or Genuino up-and-running.

You might also like