PRODUCT DATA

VerifEye™ Series 7000 and 7100

48 Circuit Advanced Branch Circuit
Monitor

VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor
Series 7000 Embedded - Series 7000 Embedded - Series 7100 Split Core CT Rogowski Coil CT Solid Core CT
With Display No Display

DESCRIPTION FEATURES
The VerifEye™ Series 7000 and 7100 48 • 48 individual CT inputs
Circuit Advanced Branch Circuit Monitor is • Inputs configurable as follows:
a cost-effective solution for electrical load • 48 Individual Single Pole Meters-or
management. The Series 7000 and 7100 • 16 Two Pole Meters-or
platform is ideal for high density, branch • 16 Three Pole Meters
circuit monitoring applications in both new • Consult factory for any other
construction and retrofit applications. configurations
The Series 7000 and 7100 monitors up to • 2 Independent sets of reference
48 branch circuits with one single meter voltage input to allow for simultaneous
board. monitoring of two different systems.
• Line powered from 90-600V,
The Series 7000 and 7100 supports all phase-to-phase
industry standard communications over • Bidirectional monitoring
RS485 and Ethernet, including ModBus • Meets ANSI & IEC metering system
RTU, ModBus TCP, BACnet MS/TP and accuracy requirements including
BACnet IP for maximum flexibility. The branch CTs
integrated USB port may be used for • Supports split core and Rogowski Coil CTs
local configuration. • Meter board features:
- Easy access terminals for CT wiring,
The Series 7000 and 7100 monitors removable connectors
current, voltage, instantaneous power, - Available with or without display
demand and energy consumption of each embedded options
circuit in a panelboard, including the main • Reports volts, amps, power, demand
feed. As a circuit approaches the user- and energy for each circuit—each Series
configured threshold, alarm indicators are 7000 covers a complete 42 breaker
triggered, preventing costly downtime from panelboard plus mains for a total of 48
overloaded circuits or failed loads. circuits
• User-configurable alarm thresholds
APPLICATIONS register for improved load management
Use the VerifEye Series 7000 and 7100 • Selectable phase orientation and number
Advanced Branch Circuit Monitor in of circuits
commercial and industrial applications for: • Limited 5-year warranty
• Data centers
• Tenant energy monitoring
• Energy allocation
• Energy management
• Load monitoring
• Building code compliance
Leviton Manufacturing Co., Inc. Lighting & Controls
20497 SW Teton Avenue, Tualatin, OR 97062 tech line 800-959-6004
©2021 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
 PRODUCT DATA
CAPABILITIES

MEASURED PARAMETERS ACCURACY

• Bidirectional energy measurements • 0.2% ANSI C12.20-2010 Class 0.2
• Volts
• Amps WIDE RANGE POWER
• kW • 90-347 Volts AC Line-to-Neutral
• kVAR • 600V Line-to-Line, CAT III
• kVA • Two voltage reference inputs
• aPF
• dPF HIGHLY CONFIGURABLE
• kW demand • 1P/2W, 2P/3W, 3P/4W (WYE), 3P/3W
• kVA demand (Delta)
VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor

• Import (Received)
• kWh, Export (Delivered) USER INTERFACE OPTIONS
• kWh • Meter front panel display unit
• Net kWh • Power Meter Viewer software with either
• Import (Received) kVAh USB direct to the meter or PC/Ethernet
• Export (Delivered) kVAh
• Net KVAh, Import (Received)
• kVARh, Export (Delivered)
• kVARh
• Net kVARh
• THD Theta
• Frequency

* All parameters for each phase and system total

(1 n
(1 n

ut

)
t

rd sio
rd sio

2V
pu
2V

DC
et
p
In
Ca pan

Ca pan
85
In

NOTE: Factory commissioning on the Series 7000 and 7100

rn

2V

arm
e
e

he

-4
B
ls
ls
Ex

Ex

Meters is highly recommend as remote configuration of the

US
+1

RS
Pu

Et

Al
Pu

meters is not an option offered by Leviton Technical Support.

PANEL FEATURES

Element ID Element ID

(1 n
(1 n

ut

)
t

rd sio
rd sio

2V
pu
2V

DC
et
p
In
Ca pan

Ca pan
85
In

rn

2V

arm
e
e

he

-4
B
ls
ls
Ex

Ex
US
+1

RS
Pu

Et

Al
Pu

LCD Display

Navigation
Buttons

Element ID Element ID

Plate
Serial # Ground LCD Display
Model #
MAC ID(s)
Navigation
Buttons

Voltage Voltage
Input 1 Plate
Input 2 Serial # Ground
Model #
MAC ID(s)

Voltage Voltage
Input 1 Input 2
SERIES 7000 DIMENSIONS

8.83”
(224.3mm)
(190mm)
7.48”

263.85
10.38”

(mm)

VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor
10.30”
(241.3mm)

Series 7000 Embedded (Panel Mount)

3.31”
(84.10mm)

Series 7000 Embedded (Panel Mount)

Leviton Manufacturing Co., Inc. Lighting & Controls

20497 SW Teton Avenue, Tualatin, OR 97062 tech line 800-959-6004
©2021 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
 PRODUCT DATA
SERIES 7100 DIMENSIONS

(241.3mm)
(336.6mm)

9.50”
13.25”
VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor

3.0”
(76.2mm)
9.87” 6.0”
(152.4mm)
(250.9mm)

Series 7100 Enclosure Front Series 7100 Enclosure Back

5.50”
(139.70mm)
(31 1.25
.75 ”
mm
)
3.14”
(79.80mm)
1.54”
(39.20mm)

9.87”
(250.90mm)

Series 7100 Enclosure Bottom

SPECIFICATIONS
PANELBOARD MONITORING SYSTEM
ELECTRICAL
Service Type 1P/2W, 2P/3W, 3P/4W, 3P/3W (Delta)
From L1 Phase to L2 Phase, 90-600VAC RMS CAT III 50/60Hz, 500mA AC
Power
Max
AC Protection 0.5A Fuse 200kA interrupt capacity
Power Out Unregulated 12VDC output, 200mA, self-resetting fuse
90-346 Volts AC Line-to-Neutral, 600V Line-to-Line, CAT III. Two independent
Voltage Channels
sets of reference voltage

VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor
Current Channels 48 channels, 0.525 VAC max, 333 mV CTs, 0-4,000+ Amps depending on CT
150% of current transducer rating (mV CTs) to maintain accuracy.
Maximum Current Input
Measure up to 4000A with Rogowski Coil CTs.
True RMS using high-speed Digital Signal Processing (DSP) with continuous
Measurement Type
sampling
Line Frequency 50/60Hz
MECHANICAL
12-22 AWG 600 VAC, voltage connection must be #14 AWG or larger & 600
Wire Connections
VAC rated
Mounting Panel Mount/Enclosure
High Voltage Cover IP30
PCBA Mounting 0.5” standoffs #6 (quantity 6, user supplied)
Mounting Plate Available with Series 7000 model
COMMUNICATIONS
Hardware RS-485, Ethernet and USB (for configuration only)
Supported Protocols ModBus, BACnet MS/TP, ModBus TCP or BACnet IP
ModBus RTU - 1200 meters (4000 ft) max, other network protocols follow
Max Distance
standard network management practices
ENVIRONMENTAL
-4° to 140°F (-20° to 60°C) At -4°F, LCD display could be illegible,
Operating Temperature
meter voltage at -4°F must exceed 100 VAC to power the meter
Operating Humidity 5-95% non-condensing
CODES & STANDARDS
Accuracy & Billing ANSI C12.20 Class 0.2, NIST traceable calibration
UL Recognized(E186827): Applies to mounting plate and circuit board
only version, conforms to UL Standard 61010-1 3rd edition, certified to CSA
Standard C22.2 No. 61010-1 3rd edition
Certifications
UL Listed (E186827): Applies to indoor enclosure version, conforms
to UL Standard 61010-1 3rd edition, certified to CSA Standard C22.2
No. 61010-1 3rd edition
Listing/Safety CE EN 61000-6-4: Class A
OTHER
Enclosure Dimensions 13.25” L x 9.87” W x 3.14” D (336.6mm x 250.90mm x 79.80mm)
Panel Mount Dimensions 10.38” L 9.5” W 3.14” D (263.90mm x 241.3mm 79.80mm)

Leviton Manufacturing Co., Inc. Lighting & Controls

20497 SW Teton Avenue, Tualatin, OR 97062 tech line 800-959-6004
©2021 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
 PRODUCT DATA
ORDERING INFORMATION
CAT. NO. DESCRIPTION
Series 7000 Dual Voltage, Embedded Panel Mount (no enclosure) Branch Circuit Monitor,
70D48-000
48 inputs, LCD display
Series 7000 Dual Voltage, Embedded Panel Mount (no enclosure) Branch Circuit Monitor,
70N48-000
48 inputs, no display
Series 7100 Dual Voltage, Branch Circuit Monitor, 48 inputs, LCD display,
71D48-000
NEMA 1 enclosure
COMPATIBLE CT OPTIONS*
CAT. NO. DESCRIPTION ACCURACY
VerifEye™ Series 7000 and 7100 48 Circuit Advanced Branch Circuit Monitor

CDV01-K17 Solid Core CT, 333mV:100A, 0.75” 0.2%

CDV02-K17 Solid Core CT, 333mV:200A, 0.75” 0.2%
CTV5X-WA4 Split Core CT, 333mV:50A, 0.4” 0.5%
CTV01-KD0 Split Core CT, 333mV:100A, 1” Window 0.5%
CTV02-KD0 Split Core CT, 333mV:200A, 1” Window 0.5%
CTV04-KD1 Split Core CT, 333mV:400A, 1.25” Window 1.0%
Split Core CT, 333mV:800A, 3.0”x3.5”
CTV08-KG1 1.0%
Window
5-4000A Rogowski Coil CT 16”,
CRV50-LR2 131mV/1000A @ 60Hz, 109.2mV/1000A <0.2% accuracy
@ 50Hz
5-4000A Rogowski Coil CT 24”,
CRV50-LR4 131mV/1000A @ 60Hz, 109.2mV/1000A <0.2% accuracy
@ 50Hz

*Series 7000 Embed Branch Circuit Monitors are compatible with 333mV CTs, sold separately

Leviton Manufacturing Co., Inc. Lighting & Controls

20497 SW Teton Avenue, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004

Leviton Manufacturing Co., Inc. Global Headquarters

201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:30AM-7:00PM ET Mon-Fri) 800-824-3005

Visit our Website at: www.leviton.com/verifeye G-9960E/B21-aja

©2021 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. REVFEB 2021