Water Supply Products: No. Products Standard Number Standard Title
Water Supply Products: No. Products Standard Number Standard Title
Water Supply Products: No. Products Standard Number Standard Title
ISO 4427-2:2007:AMD 1:2011 Plastics piping systems. Polyethylene (PE) pipes and fittings for water
supply.
Part 2: Pipes
2 Polyethylene Raised Temperature (PE-RT) Pipes MS 2508-2:2012 Plastics piping systems for hot and cold water installations.
Polyethylene of Raised Temperature Resistance (PE-RT)
Part 2: Pipes
(ISO 22391-2:2009, MOD)
ISO 22391-2:2009 Plastics piping systems for hot and cold water installations.
Polyethylene of Raised Temperature Resistance (PE- RT). Part 2: Pipes
3 Multilayer Pipe PE-RT/AL/PE- RT BS EN ISO 21003- 2:2008+A1:2011 Multilayer piping systems for hot and cold water installations inside
buildings. Pipes.
BS EN ISO 21003- 1:2008 Multilayer piping systems for hot and cold water installations inside
buildings. General.
4 Crosslinked Polyethylene (PE-X) Pipes MS 1736:Part 2:2004 Plastics piping systems for hot and cold water installations.
Cross-linked Polyethylene (PE-X). Part 2: Pipes
ISO 15875-2:2003 Plastics piping systems for hot and cold water installations.
Cross-linked Polyethylene (PE-X) - Part 2: Pipes.
7 Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes MS 628-2:2014 Plastics piping systems for water supply and for buried and above-
ground drainage and sewerage under pressure.
Unplasticized Poly(Vinyl Chloride) (PVC-U)
Part 2: Pipes (Second Revision)
(ISO 1452-3:2009, Mod)
MS 628: Part 1: 1999 AMD.1:2001 & Specification for Unplasticized PVC (uPVC) pipes for water supply:
AMD.2:2002 Part 1: Pipes (1st revision)
Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes BS EN ISO 1452-2: 2009 Plastics piping systems for water supply and for buried and above-
ground drainage and sewerage under pressure.
Unplasticized Poly(Vinyl Chloride) (PVC-U). Pipes.
8 Solvent cement for PVC-U piping system MS 628-4:2015 Plastics piping systems for water supply and for buried and above-
ground drainage and sewerage under pressure.
Unplasticized Poly(Vinyl Chloride) (PVC-U)
Part 4: Solvent Cement.
MS 628: Part 2: Section 2.2:1999 Specification for Unplasticized PVC (UPVC) pipes for water supply.
Part 2: Joints and fittings for use with Unplasticized PVC Pipes.
Section 2.2: Solvent Cement.
9 Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes MS 2045:2007 Chlorinated Poly(Vinyl Chloride) (PVC-C) plastic hot and cold water
distribution systems.
Specification
MS 1757: Part 1: 2008 Chlorinated Poly(Vinyl Chloride) (PVC-C) Plastic Piping System.
Part 1: Specification for Schedules 40 & 80 Pipes
ASTM D2846 / D2846M-09b Standard specification for Chlorinated Poly(Vinyl Chloride) (cPVC)
plastic hot and cold water distribution system.
10 Oriented Poly(Vinyl Chloride) (PVC-O) ISO 16422:2014 Pipes and joints made of Oriented Unplasticized Poly (Vinyl
Pipes Chloride) (PVC-O) for
the conveyance of water under pressure.
-Specifications
ISO 16422:2006 Pipes and joints made of Oriented Unplasticized Poly (Vinyl
Chloride) (PVC-O) for the conveyance of water undernpressure -
Specifications
11 Acrylonitrile- Butadiene- Styrene (ABS) Pipes MS 1419: Part 1: 2007 Acrylonitrile-Butadiene Styrene (ABS) piping systems for pressure
applications.
Part 1: Specification for compounds, pipes and fittings (First Revision)
AS/NZS 3518:2004 Acrylonitrile Butadiene Styrene (ABS) compounds, pipes and fittings
for pressure applications.
12 Solvent cement for ABS piping system MS 1419: Part 3:1997 Specification for Acrylonitrile Butadiene Styrene (ABS) pipes and
fittings for pressure applications.
Part 3: Solvent cement and priming (cleaning) fluids for use with ABS
pipes and fittings.
13 Polypropylene (PP) Pipes Plastics piping systems for hot and cold water installations.
MS 2286-2:2012 Polypropylene (PP) - Part 2: Pipes
(ISO 15874-2:2003, Amd.1:2007, MOD)
ISO 15874-2:2013 Plastics piping systems for hot and cold water installations.
Polypropylene (PP) - Part 2: Pipes.
14 Polybutylene (PB) Pipes MS ISO 15876-2: 2004,AMD.1:2009 Plastics piping systems for hot and cold water installations.
Polybutylene (PB) - Part 2: Pipes
(ISO 15876-2:2003, MOD)
AS/NZS 2642-2:
Polybutylene (PB) plumbing pipe systems.
2008
Polybutylene (PB) pipe for hot and cold water applications
15 Glass Reinforced Plastic (GRP) Pipes ISO 10639:2004/ Amd 1:2011 Plastics piping system for pressure and non-pressure water
supply.
Glass Reinforced Thermosetting Plastics (GRP) systems based on
Unsaturated Polyester (UP) resin
ISO 10639:2004 Plastics piping system for pressure and non-pressure water
supply.
Glass Reinforced Thermosetting Plastics (GRP) systems based on
Unsaturated Polyester (UP) resin.
16 Steel Pipes SPAN TS 21827: Specification for Steel Pipes, Fittings and Joints for water and
2013 sewage.
Part 1: Technical Delivery Requirements
Part 2: Tube Requirements
MS 1968:2007 Non-Alloy Steel Tubes and Fittings for the conveyance of
(confirmed 2011) aqueous liquids including water for human consumption. Technical
delivery conditions
BS EN 10224:2002 Non-Alloy Steel Tubes and Fittings for the conveyance of water
and other. Technical delivery conditions
17 Stainless Steel (SS) Pipes MS 1841:2010 Seamless, welded and heavily cold austenitic Stainless Steel Pipes.
Industrial Specification (First Revision)
ASTM A312 / A312M-2014B Standard specification for seamless, welded, and heavily cold
worked austenitic Stainless Steel Pipes.
18 Stainless Steel (SS) Light Gauge Tubes MS 1988:2007 Welded Stainless Steel Tubes for the conveyance of water and
(Confirmed: 2011) other aqueous liquids.
Technical delivery conditions and includes amendment A1
BS EN 10312:2002 Welded Stainless Steel Tubes for the conveyance of aqueous liquids
including water for human consumption. Technical delivery
conditions.
JIS G 3448:2012 Light Gauge Stainless Steel Tubes for ordinary piping.
19 Ductile Iron (DI) Pipes MS 1919:2013 Ductile Iron pipes, fittings, accessories and their joints for water
pipelines.
Requirements and test methods (First Revision)
BS EN 545:2010 Ductile Iron pipes, fittings, accessories and their joints for water
pipelines.
Requirements and test methods (First Revision)
BSEN 545:2006 Ductile Iron pipes, fittings, accessories and their joints for water
pipelines.
Requirements and test methods (First Revision)
20 Copper Tubes BS EN 1057:2006+A1:2010 Copper and copper alloys. Seamless, round copper tubes for water
and gas in sanitary and heating applications.
21 Steel Pipe with Plastic Lining CJ/T 136:2001 Steel Pipes of lining plastic for water supply.
22 Modified Poly(Vinyl Chloride) (PVC-M) Pipes AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications.
BS EN 12201-3: 2011+A1:2012 Plastics piping systems for water supply, and for drainage and
sewerage under pressure. Polyethylene (PE) - Fittings
2 High Density Polyethylene (HDPE) Joints DIN 16963-5 (1999-10) Pipe fittings and joints and assemblies for PE 80 and PE 100
Assemblies and Fittings Polyethylene pressure pipes.
Part 5: General Quality Requirements and Testing
Polyethylene (PE) Fabricated Fittings
MS 1058: Part 2: 2005 AMD.1:2011 Polyethylene (PE) piping systems for water supply.
Part 2: Pipes (Forth Revision)
DIN 16963-1 (1980-08) Pipe joints and elements for High Density Polyethylene (HDPE)
Pressure Pipelines, Type 1 and 2; Pipe Bends of segmental
construction for butt-welding. Dimensions.
DIN 16963-2 (1983-02) Pipe joint assemblies and fittings for type 1 and 2 High-
Density Polyethylene (HDPE) pressure pipes;
Tees and braches produced by segment inserts and necking for butt
welding. Dimension.
DIN 16963-5 (1999-10) Pipe joint assemblies and fittings for high density
polyethylene (PE-HD) pressure pipes;
General quality requirements, testing. Polyethylene (PE) Injection
Fittings
DIN 16963-4 (1988-11) Pipe joint assemblies and fittings for high-density
polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing,
flanges and sealing elements; dimensions.
3 Crosslinked Polyethylene (PE-X) Fittings MS 1736: Part 3:2004 Plastics piping systems for hot and cold water installation.
Crosslinked Polyethylene (PE-X). Part 3: Fittings
AS 2537:1994 Mechanical jointing fittings for use with Cross-linked
Polyethylene (PE-X) pipe for hot and cold water
applications.
4 Polyethylene Raised Temperature Resistance MS 2508-3:2012 Plastics piping systems for hot and cold water installations.
(PE-RT) Fittings Polyethylene of Raised Temperature Resistance (PE-RT) Part 3: Fittings
(ISO 22391-3: 2009, MOD)
ISO 22391-3:2007 Plastics piping systems for hot and cold water installations.
Polyethylene of Raised Temperature Resistance
(PE-RT)
Part 3: Fittings
5 Multilayer Fittings PE- RT/AL/PE-RT ISO 21003 3:2008 Multilayer piping systems for hot and cold water installations inside
buildings.
Part 3: Fittings
6 Poly(p -Phenylene Oxide) (PPO) and Macro-
Polyethylene/Aluminium and Cross-linked Polyethylene / Aluminium
Composite Fittings AS 4176:1994
Macro-composite pipe systems for pressure applications.
7 Mechanical Joints and Compression Fittings ISO 17885:2015 Plastic piping systems. Mechanical fittings for pressure piping system. -
Specification
8 Polypropylene (PP) Fittings MS 2286-3:2012 Plastics piping systems for hot and cold water installations.
Polypropylene (PP) Part 3: Fittings
(ISO 15874-3:2003,FDAM 1:2009, MOD)
ISO 15874-3:2013 Plastics piping systems for hot and cold water installations.
Polypropylene (PP) Part 3: Fittings
DIN 16962-5 Pipe fittings and joint assemblies for Polypropylene (PP)
(2000-04) pressure pipes - Part 5: General quality requirements and testing
9 Polybutylene (PB) Fittings MS ISO 15876 3: Plastics piping systems for hot and cold water installations
2004 Polybutylene (PB) Part 3: Fittings
AS/NZS 2642-3: Polybutylene pipe systems Mechanical jointing fittings for use with
2008 Polybutylene (PB) pipes for hot and cold water applications
10 Unplasticized Poly(Vinyl Chloride) (PVC-U) MS 628-3:2014 Plastics piping systems for water supply and for buried and above-
Joints/Fittings ground drainage and sewerage under pressure. Unplasticized
Poly(Vinyl Chloride) (PVC-U) - Part 2: Fittings (First Revision)
(ISO 1452-3:2009, Mod)
MS 628:Part 2:Section 2.1:1999 Specification for Unplasticized PVC (uPVC) pipes for water supply.
Part 2: Joints and Fittings for use with uPVC Pipes.
Section 2.1: uPVC Joints and Fittings
BS EN ISO:1452-3: 2010 Plastics piping systems for water supply and for buried and above-
ground drainage and sewerage under pressure.
Unplasticized Poly(Vinyl Chloride) (PVC-U) Fittings.
BS 4346-1:1969 Joints and fittings for use with Unplasticized PVC pressure pipes.
Injection moulded Unplasticized PVC fittings for solvent welding
for use with pressure pipes, including potable water supply.
BS 4346-2:1970 Joint and fittings for use with Unplasticized PVC pressure pipes.
Mechanical joints and fittings, principally of Unplasticized PVC.
11 Chlorinated Poly(Vinyl Chloride) (PVC-C) MS 2045:2007 Chlorinated Poly(Vinyl Chloride) (PVC-C) plastic hot and cold water
Fittings distribution systems.
Specification.
MS 1757: Part 2: Chlorinated Poly(Vinyl Chloride) (PVC-C) Plastic Piping System.
2008 Part 2: Specification for Schedule 40 Socket-type pipe fittings.
ASTM D2846 / D2846M-09b Standard specification for Chlorinated Polyvinyl Chloride (cPVC)
plastic hot and cold water distribution system.
12 Oriented Poly(Vinyl Chloride) (PVC-O) ISO 16422:2014 Pipes and joints made of Oriented Unplasticized Poly (Vinyl
Fittings Chloride) (PVC-O) for the conveyance of water under pressure
Specifications
13 Acrylonitrile- Butadiene- Styrene (ABS) Fittings MS 1419: Part 1: Acrylonitrile-Butadiene Styrene (ABS) piping systems for pressure
*refer Appendix C1 (SPAN Additional 2007 applications.
Requirement) Part 1: Specification for compounds, pipes and fittings (First Revision)
AS/NZS 3518:2004 Acrylonitrile Butadiene Styrene (ABS) compounds, pipes and fittings
for pressure application
14 Glass Reinforced Plastic (GRP) Fittings ISO 10639:2004/ Amd 1:2011 Plastics piping system for pressure and non-pressure water
supply Glass Reinforced Thermosetting Plastics (GRP) systems based
on Unsaturated Polyester (UP) resin
Amendment 1
ISO 10639:2004 Plastics piping system for pressure and non-pressure water
supply Glass Reinforced Thermosetting Plastics (GRP) Systems based
on Unsaturated Polyester (UP) resin
16 Stainless Steel (SS) Threaded Fittings MS 2495:2012 Pipework - Stainless steel fittings threaded in accordance with MS
1989: Part 1
(ISO 4144:2003, MOD)
ISO 4144:2003 Pipework - Stainless Steel fittings threaded in accordance with ISO 7-1
17 Stainless Steel (SS) Welded Fittings MS 1842:2010 Wrought Austenitic Stainless Steel piping fittings
Specification (First Revision)
ASTM 403/A403M-13a Standard specification for Wrought Austenitic Stainless Steel piping
fittings
18 Ductile Iron Fittings MS 1919:2013 Ductile Iron pipes, fittings, accessories and their joints for water
pipelines
Requirement and test method (First Revision)
MS 1919:2006 Ductile Iron pipes, fittings, accessories and their joints for water
pipelines
Requirement and test method.
19 Copper & Copper Alloys Fittings BS EN 1254-1: 1998 Copper and Copper Alloys. plumbing fittings. fittings with short
ends for capillary brazing to Copper Tubes.
BS EN 1254-2: 1998 Copper and Copper Alloys. plumbing fittings. Fittings with
compression ends for use with Copper Tubes.
BS EN 1254-3:1998 Copper and Copper Alloys. Plumbing fittings.
Fittings with compression ends for use with plastic pipes.
BS EN 1254-4:1998 Copper and Copper Alloys. Plumbing fittings.
Fittings combining other end connections with capillary or
compression ends.
BS 8537:2010 Copper and Copper Alloys. Plumbing fittings. Specification for
press ends of plumbing fittings for use with metallic tubes.
23 Flexible Coupling Spesifikasi JKR 20200-0048-99 JKR Standard Specification for Flexible Couplings and Flange Adaptors
24 Detachable Joint Spesifikasi JKR 20200-0045-99 JKR Standard Specification for Detachable Joints and Variable Adaptors
for uPVC, Ductile Iron and AC Pipes
25 Ferrous Saddle Spesifikasi JKR 20200-0044-99 JKR Standard Specification for Ferrous Saddles
JKR Spec. 20200-0184-04 JKR Standard Specification for Ferrous Saddles
26 Pillar Hydrant MS 1395:2011 Pillar Fire Hydrants: Specification (First Revision)
Spesifikasi JKR 20200-0042-99 JKR Standard Specification for Ductile Iron Pillar Hydrants
27 Ductile Iron (DI) Strainer Spesifikasi JKR 20200-0100-01 JKR Standard Specification for Ductile Iron Y and T Strainers (DN 50 to
DN 600)
28 Swivel Ferrules Spesifikasi JKR 20200-0174-04 JKR Standard Specification for Ferrules
29 Under Pressure Vertical Ferrules MS 1396:2006 Ferrules - Specification (First Revision)
30 Polypropylene (PP) Tapping Ferrules Spesifikasi JKR 20200-0055-99 JKR Standard Specification for Polypropylene (PP) Tapping Ferrules
to be used with Polyethylene (PE) and uPVC Pipes
31 Manhole Cover BS EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas. -
Definitions, classification, general principles of design,
performance requirements and test methods.
BS EN 124-2:2015 Gully tops and manhole tops for vehicular and pedestrian areas.
Gully tops and manhole tops made of cast iron.
BS EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas.
Gully tops and manhole tops made of steel or aluminium
alloys.
BS EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas.
Gully tops and manhole tops made of steel reinforced concrete.
BS EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas.
Gully tops and manhole tops made of composite materials.
BS EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas.
Gully tops and manhole tops made of Polypropylene (PP),
Polyethylene (PE) or
Unplasticized Poly(Vinyl Chloride) (PVC-U).
BS EN 124:1994 Gully Tops and Manhole Tops for vehicular and pedestrian areas -
Design requirements, type testing, marking, quality control
32 Polypropylene (PP) Clamp Saddle Spesifikasi JKR No. 1-95 (BA) JKR Standard Specification for Polypropylene (PP) Clamp Saddle to be
used with Polyethylene (PE) Pipe
33 Vulcanized Rubber Pipe Joint Seals BS EN 681-1:1996 Elastomeric Seals
Material requirements for pipe joint seals used in water and
drainage application.
Part 1: Vulcanized Rubber
34 Steel Flange BS EN 1092-1: 2007+A1:2013 Flanges and their joints. Circular flanges for pipes, valves,
fittings and accessories, PN Designated - Part 1: Steel Flanges
BS EN 1759-1: Flanges and their joints. Circular flanges for pipes, valves, fittings and
2004 accessories, class-designated. Steel flanges, NPS 1/2 to 24
2 Glass Coated/ Glass Lined/ Glass Fused/ Epoxy ISO 28765:2016 Vitreous and Porcelain Enamels - Design of bolted steel tanks
Coated/ Epoxy Lining for the storage treatment of water or municipal or industrial effluents
and sludges
ISO 28765:2008 Vitreous and Porcelain Enamels - Design of bolted steel tanks for
the storage treatment of water or municipal or industrial effluents
and sludges
AWWA D103-09 Factory-Coated Bolted Steel Tanks for Water Storage
AWWA D103-97 Factory-Coated Bolted Steel Tanks for Water Storage
Storage Cisterns Products
1 Cylindrical Double Fold System BS 5950-1:2000 Structural use of steelwork in building. - Part 1: Code of practice for
design rolled and welded section
2 Glass Coated/ Glass Lined/ Glass Fused/ Epoxy ISO 28765:2016 Vitreous and Porcelain Enamels.
Coated/ Epoxy Lining (any total adoption of the standard is Design of bolted steel tanks for the storage treatment of water or
accepted) municipal or industrial effluents and sludges
ISO 28765:2008 Vitreous and Porcelain Enamels. - Design of bolted steel tanks for the
storage treatment of water or municipal or industrial effluents and
sludges
5 Corrugated Steel Panel withPolyethyle ne-Lined SS 245:2014 Specification for glass reinforced polyester sectional water
Water Storage Tank tank.
SS 245:1995 (Cl. 10.2.1 & Specification for glass reinforced polyester sectional water
Cl. 10.2.2) tank.
BS 1449-1.1:1991 Steel Plate, Sheet & Strip. Carbon and carbon- manganese plate, sheet
and strip general specification.
6 Glass-fibre Reinforced Polyester (GRP) One- MS 1241:2011 One Piece Glass-fibre Reinforced Polyester (GRP) water tanks
Piece Water Tank nominal capacity of 100 000 litres and below.
-Specification (First Revision)
7 Pressed Steel Sectional Rectangular Tank Panel BS 1564:1975 Specification for Pressed Steel Sectional Rectangular Tanks.
8 Stainless Steel Storage Tank JKR 20200-0041-99 Stainless Steel water tanks (with effective capacity up to 15,000L)
9 Stainless Steel Storage Tank (Rectangular / CNS 9443:2000 Stainless Steel Storage Tanks.
Panel Tank)
Valves
1 Butterfly Valve Directive 2014/68/EU Pressure Equipment Directive
BS EN 593:2009+ A1:2011 Industrial Valves. Metallic Butterfly Valves
2 Air Valve Directive 2014/68/EU Pressure Equipment Directive
BS EN 1074-4: Valves for water supply. Fitness for purpose requirements and
2000 appropriate verification tests.
Air Valves
JKR 20200-0097-01 Ductile Iron Air Valves (Revised Edition 2001)
JKR 20200-0043-99 Ductile Iron Air Valves (Revised Edition 1999)
AWWA C512-07 Air Release, Air/Vacuum, and combination Air Valve for
waterworks service
3 Gate Valve MS 1049:1986 Specification for double Flanged Cast Iron Wedge Gate (Sluice) valves
for waterworks purposes
Directive 2014/68/EU Pressure Equipment Directive
EN 1074-2:2004 Valves for water supply. Fitness for purpose requirements and
appropriate verification tests.
Part 2: Isolating valves
BS EN 1074-2: Valves for water supply. Fitness for purpose requirements and
2000 appropriate verification tests.
Isolating valves.
BS 6675:1986 Specification for servicing valves (copper alloy) for water services
8 Landing Valve MS 1210: Part 1:1991 Specification for Fire Hydrant systems equipment
(Confirmed:2011) Part 1: Landing Valves for wet risers
MS 1210: Part 2:1991 Specification for Fire Hydrant systems equipment
(Confirmed:2011) Part 2: Landing Valves for dry risers
BS 5041: Pt 1:1987 Fire Hydrant systems equipment.
Specification for landing valves for wet risers
JKR 20200-0178-04 JKR Standard Specification for Piston Type Float Operated Valves.
(Revised Edition 2004)
15 Knife Gate Valve MSS SP-81-2013 Stainless-Steel or Stainless- Steel-Lined, Bonnetless, Knife Gate
Valve with Flanged Ends.
MSS SP-81-2000 Stainless Steel, Bonnetless, Flanged Knife Gate Valve.
8 Ferric Chloride MS 1450:1999 Specification for liquid Ferric Chloride for potable water
treatment
9 Ferric Sulphate MS 1452:1999 Specification for liquid Ferric Sulphate for potable water
treatment
10 Polyaluminium Chloride and ACH MS 1454:2007 Liquid Polyaluminium Chloride for use in potable water supply
Specification (first revision) 2007
11 Polymer based on Poly acrylamides MS 1928:2007 Polyacrylamides for use in potable water supply
- Specification
12 Polymer based on Polyamines MS 1929:2007 Polyamines for use in potable water supply - Specification
18 Sodium Hydroxide / Caustic Soda MS 700:1981 (Specification) for Sodium Hydroxide (technical grades)
19 Sodium Hypochlorite MS 1718:2003 Sodium Hypochlorite for use in potable water supply
- Specification
20 Sodium Silicoflouride MS 1724:2004 Sodium Silicofloride for use in potable water supply
- Specification
Flow Control
1 Air Valve BS EN 1074-4:2000 Valves for water supply. Fitness for purpose requirements
and appropriate verification tests. Air Valves
AWWA C512-15 Air Release, Air/Vacuum, and Combination Air Valve for Water
and Wastewater Service
AWWA C512-07 Air Release, Air/Vacuum and Combination Air Valve for
Waterworks Service
BS EN 124:1994 AMD 8587/1995 Gully tops & manhole tops for vehicular & pedestrian areas design
req., type testing, marking, quality control
3 Acrylonitrile Butadiene Styrene (ABS) Pipes & MS 1419: Part 1:2007 Acrylonitrile Butadiene Styrene (ABS) pipes and fittings for
Fittings & pressure application
MS 1419: Part 3:1997 Part 1:
Specification for Compounds,
Pipes and Fittings (First Revision)
Part 3:
Solvent cement and priming (cleaning) fluids for use with ABS
pipes and fittings
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings
for pressure applications
4 Cast Iron Pipes & Fittings ISO 6594:2006 Cast Iron Pipes & Fittings
- Spigot Series
5 Ductile Iron (DI) Pipes & Fittings BS EN 598:2007 Ductile Iron pipes, fittings, accessories and their joints for
+A1:2009 sewerage applications.
Requirements and test methods
6 Glass Reinforced Thermosetting Plastic (GRP) ISO 10467:2004/ Amd. 1:2012 (E) Plastic piping systems for pressure and non-pressure drainage
Pipes and sewerage
- Glass Reinforced Thermosetting Plastic (GRP) systems based on
Unsaturated Polyester (UP) resin (Amendment 1)
ISO 10467:2004 Plastic piping system for pressure and non-pressure drainage
and sewerage
- Glass Reinforced Thermosetting Plastic (GRP) systems based on
Unsaturated Polyester (UP) resin
BS EN 14364:2013 Plastics piping systems for drainage and sewerage with or without
pressure.
- Glass Reinforced Thermosetting Plastic (GRP) based on
unsaturated polyester resin (UP).
Specifications for pipes, fittings and joints
Jacking pipe
Plastic Piping systems for pressure and non-pressure water
supply, irrigation, drainage or sewerage
Jacking pipe
Glass Reinforced Thermosetting Plastic (GRP) systems based on
ISO 25780:2011
Unsaturated Polyester (UP) resin
Pipes with flexible joints intended to be installed using
jacking techniques.
BS EN12201-3: 2011+A1:2012 Plastics piping systems for water supply and for drainage and
sewerage under pressure. Polyethylene (PE). - Fittings.
ISO 16422:2014 Pipes and joints made of Oriented Unplasticized Poly (Vinyl
Chloride) (PVC-O) for the conveyance of water under pressure. -
Specification
10 Reinforced Concrete (RC) Pipes & Fittings MS 881: Part 1: Specification for precast concrete pipes and fittings for
1991 drainage and sewerage
Part 1: Specification for pipe and fittings with flexible joints and
manholes
MS 881: Part 2: Specification for precast concrete pipes and fittings for
1991 drainage and sewerage
Part 2: Specification for inspection chambers and street gullies
MS 881: Part 3: Specification for precast concrete pipes and fittings for
1991 drainage and sewerage
Part 3: Specification for pipes and fittings with ogee joints
11 Stainless Steel (SS) Pipes & Fittings ASTM A312/A312M- 2014B Standard specification for seamless, welded, and heavily cold
worked austenitic Stainless Steel pipes
ASTM A403-13 Standard specification for Wrought Austenitic Stainless Steel
piping fittings
12 Steel Pipes & Fittings SPAN TS 21827: Specification for Steel Pipes, fittings and joint for water and
2013 sewerage
Part 1: Technical delivery requirements
13 Vitrified Clay (VC) Pipes & Fittings MS 1061: Part 1: Vitrified clay pipes and fittings and pipes joints for drains and
1999 sewers.
Part 1: Requirement (First Revision)
BS EN 295-1:2013 Vitrified clay pipes systems for drains and sewer. Requirements for
pipes, fittings and joins.
14 Polymer Concrete Pipes & Fittings BS EN 14636-1:2009 Plastics Piping Systems for Non-Pressure Drainage and Sewerage.
Polyester Resin Concrete (PRC). Pipes and Fittings with Flexible
Joints
15 Steel Reinforced Polyethylene (PE) Pipe & KS M 3509:2017 Steel Reinforced Polyethylene (PE) Composite Pipe for
Fittings Sewerage and Drainage
SPS KWWA M209:2011 Fittings for Spiral Polyethylene (PE) Pipe Reinforced with Steel
Sheets
Treatment System
1 Package Plant SPAN TS 1401: Sewage Treatment System Part 1: Prefabricated Tanks
Glass-fiber Reinforced Plastic (GRP) 2010 (A1:2013) Packaged Plants
High Density Polyethylene (HDPE) Part 1
SPAN TS 1402: Sewage Treatment System
2010 (A1:2013) Part 2: Construction and Installation
Part 2 Packaged Plants
2 Small Sewage Treatment System (SSTS) MS 2441-2:2014 On Site Sewage Treatment Units
Glass-fiber Reinforced Plastic (GRP) Part 2: Packaged Prefabricated Small Sewage Treatment System
High Density Polyethylene (HDPE) Specifications
3 Septic Tank MS 2441-1:2012 On-site sewage treatment units Part 1: Prefabricated septic
tanks specifications