Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 211 views

    JMG - 512A Electrical

    Uploaded by

    Miguel Gutierrez
    The document contains two sections. Section 9.1 provides an electrical schematic diagram. Section 9.2 describes the function of various warning lights on a control panel, including lights indicating issues with charging, oil pressure, engine temperature, coolant level, air intake pressure, emergency stops, engine running status, fuel level, hydraulic oil level, and engine pre-heating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    JMG - 512A Electrical

    Uploaded by

    Miguel Gutierrez
    211 views7 pages
    The document contains two sections. Section 9.1 provides an electrical schematic diagram. Section 9.2 describes the function of various warning lights on a control panel, including lights indicating issues with charging, oil pressure, engine temperature, coolant level, air intake pressure, emergency stops, engine running status, fuel level, hydraulic oil level, and engine pre-heating.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains two sections. Section 9.1 provides an electrical schematic diagram. Section 9.2 describes the function of various warning lights on a control panel, including lights indicating issues with charging, oil pressure, engine temperature, coolant level, air intake pressure, emergency stops, engine running status, fuel level, hydraulic oil level, and engine pre-heating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    211 views7 pages

    JMG - 512A Electrical

    Uploaded by

    Miguel Gutierrez
    The document contains two sections. Section 9.1 provides an electrical schematic diagram. Section 9.2 describes the function of various warning lights on a control panel, including lights indicating issues with charging, oil pressure, engine temperature, coolant level, air intake pressure, emergency stops, engine running status, fuel level, hydraulic oil level, and engine pre-heating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    SECTION 9 Appendix

    9.1 ELECTRICAL SCHEMATIC

    39
    40
    41
    42
    43
    44
    9.2 Control Panel Warning Lights

    Battery Charging Warning Light

    If this light fails to illuminate when the ignition key is turned on or if it


    illuminates when the engine is running, it indicates a charging circuit fault.

    Oil Pressure Warning Light

    If this light fails to illuminate when the ignition key is turned on or if it


    illuminates when the engine is running, it indicates a fault in the oil pressure
    circuit. The engine will shut down within seconds of the light illuminating.

    Engine Temperature Warning

    This light will illuminate if overheating occurs in the coolant system. The
    engine will shut down within seconds of the light illuminating.

    Coolant Level Warning

    This light will illuminate if the radiator water level drops to a low level. The
    engine will shut down within seconds of the light illuminating.

    Air Intake Pressure Warning

    This light will illuminate if a problem is detected in the air breather system. The
    light will remain on until the problem is resolved.

    Machine Stop Activated

    This light will illuminate when an emergency stop switch is activated. The
    engine will immediately shut down and the light will flash.

    Engine Run Light

    This light will illuminate when the ignition key is turned to the on position and
    will remain on during all machine operations. This light will go off if a machine
    stop button is pressed.

    Fuel On

    This light will illuminate when the ignition key is turned to the crank position
    and will remain on during all machine operations. This light indicates that the
    fuel solenoid circuit has been energized.

    Hydraulic Oil Level Warning

    This light will illuminate if the hydraulic oil level is low. The engine will shut
    down within seconds of the light illuminating.

    Engine Pre-heat Indicator

    This light will illuminate when the pre-heat system is operating during start-up.
    If manual pre-heat has been fitted to the engine, the light will illuminate
    when the ignition key is turned to the pre-heat position.

    45

    You might also like