Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    SUBMERSIBLE PUMP 63 GPM at 9 M

    Uploaded by

    Ramil Laz
    This document provides specifications for a submersible drainage pump model Dm 30 made by PEDROLLO in Italy. It has a flow rate of 63 gallons per minute at a head of 9 meters, is powered by a 1.5 HP single phase 220V 60Hz motor, and features double mechanical seals, a cast iron pump body with epoxy coating, and a precision cast stainless steel handle. It is suitable for draining flooded areas like cellars and swimming pools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SUBMERSIBLE PUMP 63 GPM at 9 M

    Uploaded by

    Ramil Laz
    30 views4 pages
    This document provides specifications for a submersible drainage pump model Dm 30 made by PEDROLLO in Italy. It has a flow rate of 63 gallons per minute at a head of 9 meters, is powered by a 1.5 HP single phase 220V 60Hz motor, and features double mechanical seals, a cast iron pump body with epoxy coating, and a precision cast stainless steel handle. It is suitable for draining flooded areas like cellars and swimming pools.

    Original Title

    SUBMERSIBLE PUMP 63 GPM @ 9 M

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a submersible drainage pump model Dm 30 made by PEDROLLO in Italy. It has a flow rate of 63 gallons per minute at a head of 9 meters, is powered by a 1.5 HP single phase 220V 60Hz motor, and features double mechanical seals, a cast iron pump body with epoxy coating, and a precision cast stainless steel handle. It is suitable for draining flooded areas like cellars and swimming pools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views4 pages

    SUBMERSIBLE PUMP 63 GPM at 9 M

    Uploaded by

    Ramil Laz
    This document provides specifications for a submersible drainage pump model Dm 30 made by PEDROLLO in Italy. It has a flow rate of 63 gallons per minute at a head of 9 meters, is powered by a 1.5 HP single phase 220V 60Hz motor, and features double mechanical seals, a cast iron pump body with epoxy coating, and a precision cast stainless steel handle. It is suitable for draining flooded areas like cellars and swimming pools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    SUBMERSIBLE PUMP

    FLOW RATE : 63 GPM @ HEAD : 9 M

    Pump Performance Data:


    Pump Type : Submersible sump pump with built in float switch

    Brand / Origin : PEDROLLO / ITALY

    Model : Dm 30

    Operating Flow Rate : 63 gpm

    Operating head :9M

    Pump Outlet : 1.5 “

    Speed : 3450 RPM

    Motor Power : 1.5 HP/ 1 phase / 220 V / 60HZ

    With thermal overload protection at the motor winding

    Pump Construction:

    Pump Casing : Cast Iron epoxy coated

    Motor Casing : Stainless Steel

    Impeller : Techno polymer open impeller

    Pump Shaft : Stainless Steel

    Sealing : Mechanical Seal

    ABDULLAH S. AL-JARED TRADING LTD CO


    Tel: +966 2 665 7545 +966 2 6451 451 Fax: +966 2 665 5757
    E-mail: khaled@aljared.com
    Website: aljared.com.sa P.O. Box 6357 , Jeddah 21441
    EN

    W
    NE

    D
    60 Hz
    Submersible drainage pumps Clear water

    INSTALLATION AND USE


    NEW Designed to pump clear or slightly dirty water, these pumps are
    suitable for use in domestic, civil and professional applications and
    New version of the D series, made more reliable in particular for draining flooded areas such as cellars and garages,
    for draining swimming pools and reservoirs and for the disposal of
    with the introduction of double mechanical seals.
    non-sewage waste water.
    These pumps distinguish themselves for their reliability, which can
    TECHNICAL CHARACTERISTICS be best appreciated under automatic operating conditions in fixed
    u Double mechanical seals. installations.
    u Cast iron pump body subjected to Epoxy
    APPLICATION LIMITS
    Electrocoating Treatment. This treatment • 5 m maximum immersion depth
    guarantees high resistance to oxidation. •• Maximum liquid temperature +40 °C
    u Precision cast stainless steel handle. •• Solids passage up to Ø 10 mm
    u Float switch equipped with patented tilting
    STANDARD SUPPLY
    system (patented). •• Complete with:
    u Supply cable equipped with anti-tear system – 5 m long power cable for D8-N, D10-N, D18-N, D20-N
    (patented) – 10 m long power cable for D30-N
    •• Float switch for single-phase versions

    CHARACTERISTIC CURVES AND PERFORMANCE DATA 60 Hz  n= 3450 1/min


    0 10 20 30 40 50 60 70 80 US g.p.m.
    0 10 20 30 40 50 60 Imp g.p.m.
    28 feet

    26 D30-N

    80
    24

    22
    70
    D20-N
    20
    60
    18
    Head H (metres) 4

    D18-N
    16
    D10-N 50
    14
    D8-N 40
    12

    10
    30
    8

    6 20

    4
    10
    2

    0 0
    0 25 50 75 100 125 150 175 200 225 250 275 300 l/min
    0 1

    0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 m³/h
    Flow rate Q 4

    MODEL POWER m³/h 0 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.2 15.0 16.5 18.0
    Q
    Single-phase Three-phase kW HP l/min 0 25 50 75 100 125 150 175 200 220 250 275 300

    Dm 8 -N – 0.55 0.75 13 12.5 11.8 11 10.2 9.2 8.2 7 5.8 4.7 3

    Dm 10 -N D 10 -N 0.75 1 16 15.5 14.8 14 13.2 12.2 11.2 10 8.8 7.8 6 4.5 3

    Dm 18 -N – 0.55 0.75 H metres 16 16 15 13.7 12.5 11 9.5 8 6.5 5

    Dm 20 -N D 20 -N 0.75 1 20 20 19 18 16.8 15.5 13.9 12.3 10.7 9.2 7

    Dm 30 -N D 30 -N 1.1 1.5 26 26 24.8 23.5 22 20.4 18.7 16.9 15 13.5 11 9

    Q = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3.
    Domestic use Civil use

    POS. COMPONENT CONSTRUCTION CHARACTERISTICS


    Cast iron subjected to Epoxy Electrocoating Treatment,
    1 PUMP BODY
    with threaded port in compliance with ISO 228/1
    2 SUCTION FILTER Stainless steel AISI 304
    12
    3 SUCTION PLATE Stainless steel AISI 304
    4 IMPELLER Technopolymer open type
    5 MOTOR CASING Stainless steel AISI 304
    6 MOTOR CASING PLATE Stainless steel AISI 304
    7 MOTOR SHAFT Stainless steel EN 10088-3 - 1.4104
    8 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER
    10
    Pump Seal Shaft Materials
    Model Model Diameter Stationary ring Rotational ring Elastomer
    9
    Dm8 -N, Dm10 -N Silicon Silicon
    MG1-14D SIC Ø 14 mm NBR
    Dm18 -N, Dm20 -N carbide carbide
    5
    Silicon
    D30-N MG1-14 SIC Ø 14 mm Ceramic NBR
    carbide 11
    (Shaft with double seal with lip seal Ø 16 x Ø 24 x H 5 mm)
    9 BEARINGS 6203 ZZ / 6203 ZZ 7 13
    10 CAPACITOR
    9
    Pump Capacità
    Single-phase (220 V) (110 V or 127 V) 6
    Dm8-N, Dm10-N, Dm18-N, Dm20-N 20 μF 450 VL 30 μF 250 VL
    Dm30 25 μF 450 VL –
    11 ELECTRIC MOTOR
    – Single-phase 220 V - 60 Hz with thermal overload protector built-in to the winding
    – Three-phase 220/380 V - 60 Hz or 220/440 V - 60 Hz
    – Insulation: F class 1 2 8 4 3
    – Protection: IP X8
    12 POWER CABLE
    5 metre (10 metre for D30-N) long “H07 RN-F” cable
    (with Schuko plug on single-phase versions only)
    13 FLOAT SWITCH
    (only for single-phase versions)

    DIMENSIONS
    Typical installation

    a
    p (minimum)
    h

    DN
    e
    h1

    c b
    (minimum)

    MODEL PORT DIMENSIONS mm


    Single-phase Three-phase DN a b c h h1 d e p
    Dm 8 -N –
    Dm 10 -N D 10-N
    85 340 72 17
    Dm 18 -N – 1½” 115 147 variable 500 500
    Dm 20 -N D 20-N
    Dm 30 -N D 30-N 93 355 84 15

    You might also like