Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

BRJRJSP Broshure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

IT T Residential Water Systems

Red Jacket
Water Products
RJSP E-Z Prime Self-Priming Features
Centrifugal Pumps ■ Self-Priming Design: Once pump is primed
it never needs priming again even if water
level drops below the end of the suction
pipe. Pumping resumes once the water level
rises above the end of the suction pipe.
■ Serviceable:
• Back pullout design allows disassembly of
pump for service without disturbing piping.
• Two compartment motor for easy access to
motor wiring and replaceable components.
■ Diffuser (Guidevane): Bolt down diffuser
provides positive alignment with impeller.
Diffuser has stainless wear ring for extended
performance in abrasive conditions. F.D.A.
compliant, injection molded, food grade,
New base on 1½ – 3 HP models.
glass filled Lexan® for durability and
abrasion resistance.
■ Impeller: F.D.A. compliant, glass filled
Noryl®. Corrosion and abrasion resistant.
■ Corrosion Resistant: Electro-coated paint
process is applied inside and out, then
baked on.
■ Casing: Cast iron construction. Four (4)
bolt, back pull-out design. Tapped openings

REDJACKET ® provided for vacuum gauge and casing


drain.
Water Products ■ Powered for Continuous Operation: Pump
ratings are within the motor manufacturer’s
Red Jacket Water Products is a brand of ITT Water recommended working limits. Can be
Technology, Inc. - a subsidiary of ITT Industries, Inc. operated continuously without damage.
www.redjacketwaterproducts.com ■ Mechanical Seal: Carbon/ceramic faces,
BUNA elastomers. 300 series stainless steel
metal parts. Pump design prevents the seal
Engineered for life from running dry.
IT T RED JACKET WATER PRODUCTS
Residential Water Systems

APPLICATIONS • Maximum working pressure: AGENCY LISTINGS


Specifically designed for the 125 PSIG.
following uses: • Maximum water temperature: Canadian Standards
140° F (60° C). ®
Association.
• Lawn sprinkling • Rotation: clockwise when
• Irrigation viewed from motor end.
• Air conditioning systems
• Heat pumps
Motor:
• NEMA standard open drip
uL
®
Underwriters Laboratories
(on 75RJSP – 200RJSP)
• Water transfer proof.
• Dewatering • 60 Hz, 3500 RPM. Goulds Pumps is ISO 9001 Registered.
• Stainless steel shaft.
SPECIFICATIONS • Single phase: ¾–1½ HP,
Pump: 115/230 V; 2 and 3 HP,
• Pipe connections: 230 V only. Built-in overload
1½” NPT suction with automatic reset.
1½” NPT discharge • Three phase: 230/460 V.
• Capacities: to 110 GPM at Overload protection must
5 foot suction lift. be provided in starter unit.
Starter and heaters (3) must be
• Heads: to 128 feet.
ordered separately.
• Reprime capabilities: to 25
• Optional TEFC motors are avail-
feet suction lift.
able. See price book for order
numbers.

dimensions and weights


Model 75RJSP 100RJSP 150RJSP 200RJSP 300RJSP
HP ¾ 1 1½ 2 3
Length “L” 193⁄16 197⁄8 213⁄16 209⁄16 2111⁄32
Width 8¼
Height 9¼
Weight (lbs.) 48 52 60 65 76
Phase Single
(All dimensions are in inches and weights in lbs. Do not use for construction purposes.)

1½” NPT DISCHARGE “L”



1½” SUCTION

3

31⁄8
49⁄16

3½ 7 49⁄16 51⁄8
8

IT T RED JACKET WATER PRODUCTS
Residential Water Systems

Performance Curve

METERS FEET

40

120

25'
TOTAL DYNAMIC HEAD (H)

30 100
25'
25'
20' 20'
80 20'

25' 15'
20 25'
60 15'
20'
20' 10'
15'
40 10'
15' 15'
10 10' 10'
10' 5'
100RJSP
20 5' 5'
5' 5'
75RJSP 150RJSP 200RJSP 300RJSP

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 U.S. GPM

0 5 10 15 20 25 m3/hr.
GALLONS PER MINUTE (Q)

Performance Ratings
PSI Suction Lift in Feet
Model Discharge
Pressure 5 10 15 20 25
20 44 41 36 31 24
75RJSP 30 34 31 26 22 14
40 10 4 0 0 0
20 53 51 49 46 41
100RJSP 30 43 41 38 36 32
40 29 22 16 8 0
20 63 59 54 49 39
150RJSP 30 60 55 51 46 37
40 45 38 33 20 14
20 86 77 70 59 46
200RJSP 30 80 72 67 57 44
40 65 60 57 50 43
20 105 100 88 76 60
300RJSP 30 92 90 84 75 57
40 73 67 62 55 50
Performance ratings are in GPM.
IT T Residential Water Systems

REDJACKET ®

Water Products
Red Jacket Water Products is a licensed trademark.
The E-Z Prime and ITT Engineered Blocks Symbol are
registered trademarks and tradenames of ITT Industries, Inc.
Noryl and Lexan are registered trademarks of GE Plastic.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
BRJRJSP February, 2006
© 2006 ITT Water Technology, Inc.

Engineered for life

You might also like