Series description: Wilo-Sub TWI 4-..

-B

Design Equipment/function
Submersible pump, multistage • Multistage submersible-motor pump with radial impellers
• Integrated non-return valve
Application • NEMA coupling
• For water and potable water supply from boreholes and rainwater
• Single-phase or three-phase motor
storage
• Hermetically cast motors
• Process water supply
• For municipal water supply, sprinkling and irrigation Materials
• Pressure boosting • Hydraulic housing: 1.4301 stainless steel
• Lowering the water level • Impellers: 1.4301 stainless steel
• For pumping water in industrial applications • Hydraulics shaft: 1.4057 stainless steel
• For pumping water without long-fibre and abrasive constituents • Motor housing: 1.4301 stainless steel
• Motor shaft: 1.4305 stainless steel
Type key
Description/design

Subject to change without prior notice. www.wilo.co.uk 2012-12 1/8

e.g. Wilo-Sub TWI 4.01-09-B Submersible-motor pump for vertical or horizontal installation.
TWI Submersible pump Hydraulics
Multistage submersible-motor pump with 4" NEMA connection and radial
4 Diameter of the hydraulic unit in inches ["] or semi-axial impellers with sectional construction. Integrated non-return
01 Nominal volume flow [m3/h] valve. All parts in contact with the fluid are made of corrosion-free
materials.
09 Number of hydraulic stages Motor
B Series generation Corrosion-free single-phase or three-phase AC motor for direct starting.
Sealed and hermetically cast motor, resin-impregnated, with enamel-
insulated winding, self-lubricating bearing, with water-glycol filling.
Special features/product advantages Cooling
• Easy maintenance due to rapid installation and dismantling
The motor is cooled by the fluid. The motor must always be operated in
• Integrated non-return valve submerged state. The limit values for the max. fluid temperature and the
• Vertical and horizontal installation possible minimum flow rate must not be exceeded. Vertical installation is possible
optionally with or without cooling jacket. Cooling jacket is required for
Technical data horizontal installation.
• Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Pressure shroud
• Immersed operating mode: S1 The pressure shroud is used for direct installation of the unit in the pipe
• Fluid temperature: 3-30 °C system. Standard models are without mounted non-return valves. The
• Minimum motor flow: 0.1 m/s maximum inlet pressure is 10 bar.
• Max. sand content: 50 g/m3
• Max. number of starts: 20/h Configuration
• No suction mode is possible with these units!
• Max. immersion depth: 350 m • The unit must be fully immersed in water during operation.
• Protection class: IP 68
• Pressure connection: Rp 1¼ Rp 2 Scope of delivery
• Hydraulics + motor fully assembled
• 1.5/2.5 m connecting cable approved for potable water (cross-section:
4x1.5 mm2)
• Single-phase version including switchbox with capacitor, thermal
motor protection and On/Off switch
• Installation and operating instructions

Options
• Hydraulics in 1.4401 stainless steel
• Three-phase AC motor in 1.4401 stainless steel
• 60 Hz version
• Single-phase motor without soft starter, with integrated lightning and
overload protection up to 1.1 kW

Subject to change without prior notice. www.wilo.co.uk 2012-12 2/8

Pump curves
1~230 V, 50 Hz, p = 1 kg/dm3, v = 1x10-6 m2/s,
ISO 9906 Annex A, η = pump efficiency

Subject to change without prior notice. www.wilo.co.uk 2012-12 3/8

Design
NEMA connection •
Standardised connection −
Integrated non-return valve •
Without non-return valve −
Single-phase AC motor •
Three-phase motor •
Direct activation •
Star-delta activation −
FC operation •
Motor with cast stator •
Rewindable motor −
Oil motor filling −
Water-glycol motor filling •
Potable water motor filling −
Hydraulics/motor preassembled •
Application
Horizontal installation •
Vertical installation •
Equipment/function
Motor temperature monitoring, PT100 optional
Motor temperature monitoring, PTC optional
Capacitor box for 1~230 V •
Dry-running protection system optional
Integrated lightning protection −
Accessories
Bearing brackets for horizontal installation −
Cooling jacket optional
Non-return valve −
Pressure shroud optional
Materials
Pump housing 1.4301
Pump housing (special version) 1.4404
Impeller 1.4301
Impeller (special version) 1.4404
Motor housing 1.4301
Motor housing (special version) 1.4401
• = available, = not available

Subject to change without prior notice. www.wilo.co.uk 2012-12 4/8

Pump type Mains Max. volume Max. Optimum Optimal Motor Pressure Nominal Art no.
connection flow delivery volume flow delivery diameter connection motor
head head power

Qmax / m3/h Hmax / m Qopt / m3/h Hopt / m Ø  / " P2 / kW

1~230 V, 50
TWI 4.01-09-B 2 50 1 37 4 Rp 1¼ 0.37 6043566
Hz
3~400 V, 50
TWI 4.01-09-B 2 50 1 37 4 Rp 1¼ 0.37 6043546
Hz
1~230 V, 50
TWI 4.01-14-B 2 75 1 62 4 Rp 1¼ 0.55 6043567
Hz
3~400 V, 50
TWI 4.01-14-B 2 75 1 62 4 Rp 1¼ 0.55 6043547
Hz
1~230 V, 50
TWI 4.01-18-B 2 96 1 73 4 Rp 1¼ 0.55 6043568
Hz
3~400 V, 50
TWI 4.01-18-B 2 96 1 73 4 Rp 1¼ 0.55 6043548
Hz
1~230 V, 50
TWI 4.01-21-B 2 110 1 81 4 Rp 1¼ 0.75 6043569
Hz
3~400 V, 50
TWI 4.01-21-B 2 110 1 81 4 Rp 1¼ 0.75 6043549
Hz
1~230 V, 50
TWI 4.01-28-B 2 149 1 111 4 Rp 1¼ 1.10 6043570
Hz
3~400 V, 50
TWI 4.01-28-B 2 149 1 111 4 Rp 1¼ 1.10 6043550
Hz
1~230 V, 50
TWI 4.01-36-B 2 195 1 144 4 Rp 1¼ 1.10 6043571
Hz
3~400 V, 50
TWI 4.01-36-B 2 195 1 144 4 Rp 1¼ 1.10 6043551
Hz
1~230 V, 50
TWI 4.01-42-B 2 228 1 180 4 Rp 1¼ 1.50 6043572
Hz
3~400 V, 50
TWI 4.01-42-B 2 228 1 180 4 Rp 1¼ 1.50 6043552
Hz
1~230 V, 50
TWI 4.02-09-B 3 50 2 42 4 Rp 1¼ 0.55 6042682
Hz
3~400 V, 50
TWI 4.02-09-B 3 50 1 42 4 Rp 1¼ 0.55 6042944
Hz
1~230 V, 50
TWI 4.02-13-B 3 72 2 52 4 Rp 1¼ 0.75 6042684
Hz
3~400 V, 50
TWI 4.02-13-B 3 72 2 52 4 Rp 1¼ 0.75 6042945
Hz
1~230 V, 50
TWI 4.02-18-B 3 100 2 74 4 Rp 1¼ 1.10 6042685
Hz
3~400 V, 50
TWI 4.02-18-B 3 100 2 74 4 Rp 1¼ 1.10 6042946
Hz
1~230 V, 50
TWI 4.02-23-B 3 130 2 95 4 Rp 1¼ 1.10 6042686
Hz
3~400 V, 50
TWI 4.02-23-B 3 130 2 95 4 Rp 1¼ 1.10 6042947
Hz
1~230 V, 50
TWI 4.02-28-B 3 160 2 116 4 Rp 1¼ 1.50 6042687
Hz
3~400 V, 50
TWI 4.02-28-B 3 160 2 116 4 Rp 1¼ 1.50 6042948
Hz
1~230 V, 50
TWI 4.02-33-B 3 190 2 134 4 Rp 1¼ 1.50 6042688
Hz
3~400 V, 50
TWI 4.02-33-B 3 190 2 134 4 Rp 1¼ 1.50 6042949
Hz
1~230 V, 50
TWI 4.02-40-B 3 225 2 160 4 Rp 1¼ 2.20 6042693
Hz
3~400 V, 50
TWI 4.02-40-B 3 225 2 160 4 Rp 1¼ 2.20 6042950
Hz
1~230 V, 50
TWI 4.02-48-B 3 270 2 199 4 Rp 1¼ 2.20 6042695
Hz

Subject to change without prior notice. www.wilo.co.uk 2012-12 5/8

Pump type Mains Max. volume Max. Optimum Optimal Motor Pressure Nominal Art no.
connection flow delivery volume flow delivery diameter connection motor
head head power

Qmax / m3/h Hmax / m Qopt / m3/h Hopt / m Ø  / " P2 / kW

3~400 V, 50
TWI 4.02-48-B 3 270 2 199 4 Rp 1¼ 2.20 6042951
Hz
1~230 V, 50
TWI 4.03-06-B 5 35 2 29 4 Rp 1¼ 0.55 6042696
Hz
3~400 V, 50
TWI 4.03-06-B 5 35 2 29 4 Rp 1¼ 0.55 6042952
Hz
1~230 V, 50
TWI 4.03-09-B 5 50 3 40 4 Rp 1¼ 0.75 6042697
Hz
3~400 V, 50
TWI 4.03-09-B 5 50 3 40 4 Rp 1¼ 0.75 6042953
Hz
1~230 V, 50
TWI 4.03-12-B 5 70 3 52 4 Rp 1¼ 1.10 6042698
Hz
3~400 V, 50
TWI 4.03-12-B 5 70 3 52 4 Rp 1¼ 1.10 6042954
Hz
1~230 V, 50
TWI 4.03-15-B 5 90 3 70 4 Rp 1¼ 1.10 6042699
Hz
3~400 V, 50
TWI 4.03-15-B 5 90 3 70 4 Rp 1¼ 1.10 6042955
Hz
1~230 V, 50
TWI 4.03-18-B 5 105 3 81 4 Rp 1¼ 1.50 6042900
Hz
3~400 V, 50
TWI 4.03-18-B 5 105 3 81 4 Rp 1¼ 1.50 6042956
Hz
1~230 V, 50
TWI 4.03-22-B 5 130 3 98 4 Rp 1¼ 1.50 6042901
Hz
3~400 V, 50
TWI 4.03-22-B 5 130 3 98 4 Rp 1¼ 1.50 6042957
Hz
1~230 V, 50
TWI 4.03-25-B 5 150 3 110 4 Rp 1¼ 2.20 6042902
Hz
3~400 V, 50
TWI 4.03-25-B 5 150 3 110 4 Rp 1¼ 2.20 6042958
Hz
1~230 V, 50
TWI 4.03-29-B 5 170 3 122 4 Rp 1¼ 2.20 6042903
Hz
3~400 V, 50
TWI 4.03-29-B 5 170 3 122 4 Rp 1¼ 2.20 6042959
Hz
1~230 V, 50
TWI 4.03-33-B 5 195 3 145 4 Rp 1¼ 2.20 6042904
Hz
3~400 V, 50
TWI 4.03-33-B 5 195 3 145 4 Rp 1¼ 2.20 6042960
Hz
3~400 V, 50
TWI 4.03-39-B 5 235 3 175 4 Rp 1¼ 3 6042961
Hz
3~400 V, 50
TWI 4.03-45-B 5 270 3 199 4 Rp 1¼ 3 6042962
Hz
3~400 V, 50
TWI 4.03-52-B 5 315 3 225 4 Rp 1¼ 3.70 6042963
Hz
1~230 V, 50
TWI 4.05-04-B 7 23 4 18 4 Rp 1½ 0.55 6042905
Hz
3~400 V, 50
TWI 4.05-04-B 7 23 4 18 4 Rp 1½ 0.55 6042964
Hz
1~230 V, 50
TWI 4.05-06-B 7 33 4 26 4 Rp 1½ 0.55 6043573
Hz
3~400 V, 50
TWI 4.05-06-B 7 33 4 26 4 Rp 1½ 0.55 6043553
Hz
1~230 V, 50
TWI 4.05-08-B 7 48 5 33 4 Rp 1½ 0.75 6042906
Hz
3~400 V, 50
TWI 4.05-08-B 7 48 5 33 4 Rp 1½ 0.75 6042965
Hz
1~230 V, 50
TWI 4.05-12-B 7 70 5 49 4 Rp 1½ 1.50 6043574
Hz

Subject to change without prior notice. www.wilo.co.uk 2012-12 6/8

Pump type Mains Max. volume Max. Optimum Optimal Motor Pressure Nominal Art no.
connection flow delivery volume flow delivery diameter connection motor
head head power

Qmax / m3/h Hmax / m Qopt / m3/h Hopt / m Ø  / " P2 / kW

3~400 V, 50
TWI 4.05-12-B 7 70 5 49 4 Rp 1½ 1.50 6043554
Hz
1~230 V, 50
TWI 4.05-17-B 7 98 5 68 4 Rp 1½ 2.20 6042907
Hz
3~400 V, 50
TWI 4.05-17-B 7 98 5 68 4 Rp 1½ 2.20 6042966
Hz
1~230 V, 50
TWI 4.05-21-B 7 122 5 77 4 Rp 1½ 2.20 6042908
Hz
3~400 V, 50
TWI 4.05-21-B 7 122 5 77 4 Rp 1½ 2.20 6042967
Hz
1~230 V, 50
TWI 4.05-25-B 7 142 5 91 4 Rp 1½ 2.20 6042909
Hz
3~400 V, 50
TWI 4.05-25-B 7 142 5 91 4 Rp 1½ 2.20 6042968
Hz
3~400 V, 50
TWI 4.05-33-B 7 190 5 125 4 Rp 1½ 3 6042969
Hz
3~400 V, 50
TWI 4.05-38-B 7 220 6 139 4 Rp 1½ 3.70 6042970
Hz
3~400 V, 50
TWI 4.05-44-B 7 253 6 161 4 Rp 1½ 4 6042971
Hz
1~230 V, 50
TWI 4.09-05-B 12 28 8 20 4 Rp 2 1.10 6042910
Hz
3~400 V, 50
TWI 4.09-05-B 12 28 8 20 4 Rp 2 1.10 6042972
Hz
1~230 V, 50
TWI 4.09-07-B 12 40 8 29 4 Rp 2 1.10 6042911
Hz
3~400 V, 50
TWI 4.09-07-B 12 40 8 29 4 Rp 2 1.10 6042973
Hz
1~230 V, 50
TWI 4.09-10-B 12 52 8 39 4 Rp 2 1.50 6042912
Hz
3~400 V, 50
TWI 4.09-10-B 12 52 8 39 4 Rp 2 1.50 6042974
Hz
1~230 V, 50
TWI 4.09-12-B 12 65 8 46 4 Rp 2 2.20 6043575
Hz
3~400 V, 50
TWI 4.09-12-B 12 65 8 46 4 Rp 2 2.20 6043555
Hz
1~230 V, 50
TWI 4.09-15-B 12 81 8 57 4 Rp 2 2.20 6042913
Hz
3~400 V, 50
TWI 4.09-15-B 12 81 9 57 4 Rp 2 2.20 6042975
Hz
3~400 V, 50
TWI 4.09-18-B 12 98 9 70 4 Rp 2 3 6042976
Hz
3~400 V, 50
TWI 4.09-21-B 12 113 9 82 4 Rp 2 3.70 6042977
Hz
3~400 V, 50
TWI 4.09-25-B 12 132 8 96 4 Rp 2 3.70 6042978
Hz
3~400 V, 50
TWI 4.09-30-B 12 165 9 120 4 Rp 2 5.50 6042979
Hz
3~400 V, 50
TWI 4.09-37-B 12 202 9 142 4 Rp 2 5.50 6042980
Hz
1~230 V, 50
TWI 4.14-05-B 21 33 13 25 4 Rp 2 2.20 6042914
Hz
3~400 V, 50
TWI 4.14-05-B 21 33 13 25 4 Rp 2 2.20 6042981
Hz
1~230 V, 50
TWI 4.14-07-B 21 46 14 34 4 Rp 2 2.20 6042915
Hz
3~400 V, 50
TWI 4.14-07-B 21 46 14 34 4 Rp 2 2.20 6042982
Hz

Subject to change without prior notice. www.wilo.co.uk 2012-12 7/8

Pump type Mains Max. volume Max. Optimum Optimal Motor Pressure Nominal Art no.
connection flow delivery volume flow delivery diameter connection motor
head head power

Qmax / m3/h Hmax / m Qopt / m3/h Hopt / m Ø  / " P2 / kW

3~400 V, 50
TWI 4.14-10-B 21 63 13 48 4 Rp 2 3 6042983
Hz
3~400 V, 50
TWI 4.14-13-B 21 81 14 61 4 Rp 2 4 6042984
Hz
3~400 V, 50
TWI 4.14-18-B 21 112 14 86 4 Rp 2 5.50 6042985
Hz
3~400 V, 50
TWI 4.14-25-B 21 159 14 119 4 Rp 2 7.50 6042986
Hz

Subject to change without prior notice. www.wilo.co.uk 2012-12 8/8