Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Water Heater Eemax-SPEX4208-Product-Overview

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

FlowCo™ Specifications

Electric Tankless Water Heater


Point-of-use non-thermostatic heater- Ideal for handwashing and fixed-flow applications

Applications
• Handwashing
• Kitchen/bar/utility sinks
• Fixed-flow
• Designed for a single sensor faucet or meter faucet
Performance Features
• Self-diagnostics
• Intelligent controls
• InfoCue - visible LED indicator
• SafeStart™ technology
• Mounts in any orientation
• Compact size
• Only one cold water line needed for installation
• No T&P relief valve needed (check local codes)
• Integral 3/8" compression fittings
• Control system activates heater only on demand
• Bare wire technology
• High temperature limit switch (ECO - automatic energy cut-off)
• Low activation flow starting at 0.25 GPM turn on (model Water Heater
dependent)
in accordance
*The wetted surface of this product
with NSF/ANSI
contacted by water contains less than
• Warranty, five (5) years limited on leaks, one (1) year parts 372 MH49688
0.25% lead and meets ANSI/NSF 372

Note: For optimum performance, mounting


Benefits location should be within 2 feet of fixture.
• Endless hot water – no storage capacity to run out
• Fits almost anywhere; suitable for ADA compliant facilities Special Design Service
• Save water and time by installing unit at point-of-use to eliminate Inquiries for units for unique applications are welcome.
long pipe runs
Call our Technical Service department at 1-800-543-6163.
• Reduces installation cost and materials
• Cut energy waste (no standby heat loss)
• No venting Suggested Specification
• Purge technology engages upon start-up to avoid dry-fire Replace suggested spec text on PDF w/ the following:
occurrence
• Easy, flexible installation Tankless water heater shall be an Eemax model number
• Ready out of the box SPEX________.
• Over temperature protection Unit shall have ABS UL 94 5VA rated cover. Unit shall allow
• Real-time response to flow mounting in any orientation. Element shall be replaceable cartridge
• Operation feedback via an intuitive LED indicator insert. Element shall be iron-free, nickel-chrome material. Unit
• Blinking patterns indicate system status shall have replaceable filter in the inlet connector. Unit shall include
an integrated flow meter to ensure accurate turn-on / turn-off
System Specifications flow rate. Heater shall be fitted with 3/8" compression fittings to
Dimensions: 10.5" H x 5.25" W x 3" D eliminate the need for soldering. Maximum operating pressure of
Product Weight: (model dependent) 2.75 lb/3 lb 150 PSI. Diagnostic features to include LED error/fault indicator.
Heater shall employ technology that engages upon start-up to
Cover: ABS-UL 94 5VA
avoid dry-fire occurrence. Hot water storage tanks prohibited. Unit
Color: White shall be Eemax or approved equal.
Minimum Operating Pressure: 30 PSI
NOTE: Refer to rating chart for product information.
Maximum Operating Pressure: 150 PSI
Element: Replaceable nichrome cartridge insert
Fittings: 3/8" compression fittings
U.S. Patent Pending Technology

Eemax, 400 Captain Neville Drive, Waterbury, CT 06705


(800) 543-6163 | info@eemaxinc.com | www.eemax.com

Information and product specifications contained in this document are subject to change without notice.
FlowCo™ Specifications
Electric Tankless Water Heater
Point-of-use non-thermostatic heater- Ideal for handwashing and fixed-flow applications

TEMPERATURE RISE °F
* 240V units can be used on 208V single phase with
RECOMMENDED
WIRE SIZE TURN ON 0.3 0.5 0.75 1.0 1.5 2.0 25% reduced temperature output. Please note
MODEL NUMBER kW AMPS (75° C/CU) (GPM) GPM GPM GPM GPM GPM GPM per UL standards the rating plate and installation
instructions will all be according to a 240V applied
VOLTS 120
voltage. Check with local officials prior to derating
C SPEX1812 1.8 15 14 AWG 0.2 41° 25° 16° 12° 8° 6° the electrical infrastructure.
C  SPEX1812CA (Canadian model) 1.8 15 14 AWG 0.2 41° 25° 16° 12° 8° 6° "C"indicates evaluation and compliance to either
Underwriters Laboratories (UL) or Intertek (ETL)
C SPEX2412 2.4 20 14 AWG 0.25 55° 33° 22° 16° 11° 8°
under CAN/CSA-C22.2 No. 64/No. 88.
C  SPEX2412CA (Canadian model) 2.4 20 14 AWG 0.25 55° 33° 22° 16° 11° 8°
C SPEX3012 3.0 25 12 AWG 0.25 68° 41° 27° 20° 14° 10°
5.25 3.00
C  SPEX3012CA (Canadian model) 3.0 25 12 AWG 0.25 68° 41° 27° 20° 14° 10°
C SPEX3512 3.5 29 10 AWG 0.3 80° 48° 32° 24° 16° 12°
C  SPEX3512CA (Canadian model) 3.5 29 10 AWG 0.3 80° 48° 32° 24° 16° 12°
C VOLTS 208 Single Phase
C SPEX3208 3.0 15 14 AWG 0.25 68° 41° 27° 20° 14° 10°
9.73
C  SPEX3208CA (Canadian model) 3.0 15 14 AWG 0.25 68° 41° 27° 20° 14° 10°
C SPEX4208 4.1 20 14 AWG 0.4 – 56° 37° 28° 19° 14°
C  SPEX4208CA (Canadian model) 4.1 20 14 AWG 0.4 – 56° 37° 28° 19° 14°
C SPEX8208 8.3 40 8 AWG 0.7 – – 76° 57° 38° 28°
C  SPEX8208CA (Canadian model) 8.3 40 8 AWG 0.7 – – 76° 57° 38° 28°
1.12 1.50 .81
VOLTS 240* OUTLET INLET

C SPEX35 3.5 15 14 AWG 0.3 80° 48° 32° 24° 16° 12°
 SPEX35 (derated 208V performance) 2.6 13 14 AWG 0.3 59° 36° 24° 18° 12° 9°
C  SPEX35CA (Canadian model) 3.5 15 14 AWG 0.3 80° 48° 32° 24° 16° 12°
NEMA 7.30
9.84
4/4X
C SPEX48 4.8 20 14 AWG 0.4 – 66° 44° 33° 22° 16°
 SPEX48 (derated 208V performance) 3.6 17 14 AWG 0.4 – 49° 33° 25° 16° 12°
C  SPEX48CA (Canadian model) 4.8 20 14 AWG 0.4 – 66° 44° 33° 22° 16° 4X Ø.25
MOUNTING
C SPEX55 5.5 23 12 AWG 0.5 – 75° 50° 38° 25° 19° 11.08 HOLES
 SPEX55 (derated 208V performance) 4.1 20 12 AWG 0.5 – 56° 37° 28° 19° 14°
11.81
C  SPEX55CA (Canadian model) 5.5 23 12 AWG 0.5 – 75° 50° 38° 25° 19°
C SPEX65 6.5 27 10 AWG 0.7 – – 59° 44° 30° 22°
 SPEX65 (derated 208V performance) 4.8 23 10 AWG 0.7 – – 44° 33° 22° 16°
C  SPEX65CA (Canadian model) 6.5 27 10 AWG 0.7 – – 59° 44° 30° 22°
C SPEX75 7.5 32 10 AWG 0.7 – – 68° 51° 34° 26°
 SPEX75 (derated 208V performance) 5.6 27 10 AWG 0.7 – – 51° 38° 25° 19°
C  SPEX75CA (Canadian model) 7.5 32 10 AWG 0.7 – – 68° 51° 34° 26°
5.91
C SPEX95 9.5 40 8 AWG 0.8 – – – 65° 43° 32° OUTLET INLET
 SPEX95 (derated 208V performance) 5.6 34 8 AWG 0.8 – – – 38° 25° 19°
C  SPEX95CA (Canadian model) 9.5 40 8 AWG 0.8 – – – 65° 43° 32° 1.07 4.17 1.50
VOLTS 277 Single Phase
SPEX100 10.0 36 8 AWG 0.8 – – – 68° 46° 34°
C  SPEX100CA (Canadian model) 10.0 36 8 AWG 0.8 – – – 68° 46° 34°
SPEX3277 3.0 11 14 AWG 0.25 68° 41° 27° 20° 14° 10°
C  SPEX3277CA (Canadian model) 3.0 11 14 AWG 0.25 68° 41° 27° 20° 14° 10°
SPEX4277 4.1 15 14 AWG 0.4 – 56° 37° 28° 19° 14°
C   SPEX4277CA (Canadian model) 4.1 15 14 AWG 0.4 – 56° 37° 28° 19° 14°
SPEX60 6.0 22 12 AWG 0.7 – – 55° 41° 27° 20°
C  SPEX60CA (Canadian model) 6.0 22 12 AWG 0.7 – – 55° 41° 27° 20°
SPEX80 8.0 29 10 AWG 0.7 – – 73° 55° 36° 27°
C  SPEX80CA (Canadian model) 8.0 29 10 AWG 0.7 – – 73° 55° 36° 27°
SPEX90 9.0 33 10 AWG 0.7 – – 82° 61° 41° 31°
C  SPEX90CA (Canadian model) 9.0 33 10 AWG 0.7 – – 82° 61° 41° 31°

Eemax, 400 Captain Neville Drive, Waterbury, CT 06705


(800) 543-6163 | info@eemaxinc.com | www.eemax.com
Information and product specifications contained in this document are subject to change without notice.
© 2018 Eemax, Inc. All Rights Reserved. 2018-09-25

You might also like