Manual Hydraulic Press: Model 15T
Manual Hydraulic Press: Model 15T
Manual Hydraulic Press: Model 15T
The Manual Hydraulic Press is available up to 25 MPa load and used for a wide
range of laboratory press applications. The press has a compact, small
footprint design making it ideal for bench-top and glove box laboratory
applications.
With a rigid steel construction, and protective safety shield as standard, this
laboratory hydraulic press is particularly well-suited for FTIR KBr pellet press, XRF
pellet press and thin film press applications.
25 MPa configurations
Polycarbonate safety guards
Adjustable upper bolster
Adjustable pressure control valve
Vacuum ports
Pressure release valve
Low pressure conversion gauges
Model 15T
Pressure Range 0-15T( 0-25 MPa)
Piston Diameter 87mm
Maximum Piston Stroke 20mm
Table Diameter 98mm
Workspace 90×90×150mm
Pressure Stability ≤1MPa/5min
Weight 40kg
Exterior Size 280×210×500mm
Large tonnage machine, small for a large cross-sectional area of the powder
molded piece, or need greater pressure of the occasion, accompanied by
different shapes of the mold, you can press out the different shapes of different
sizes of film. Such as: round, square, rectangular, circular, hexagonal, flat
shape, coupled with electric heating the mold, the heating process in the
tablet.
die set
Circuit principle: work, close the drain valve 7. Swing manual pressure to 11,
the oil from the oil tank 8 through the inhalation check valve 15 through a
check valve 16 into the piston-cylinder pressure of 6, so continue to store
energy, and high-pressure oil, and 10 in the instrument displayed when
opening the drain valve 7, the immediate unloading.
Steps: first injection hole 13 Unscrew the screw clockwise to tighten the oil drain
valve 7, table 5 will be placed in the center of the mold, with the tightening
screw 2, the back and forth manual pressure to 11 to achieve the required
pressure , holding pressure, the counter-clockwise opening valve 7 loose, you
can remove the mold.
KBr Powder
Mortar and
Die set pestle