Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
39 views

Concrete Finite Check

This document summarizes the design of a beam using STAAD Pro software. It analyzes the beam reinforcement at the midspan and ends, checking that the provided steel area exceeds the minimum requirements. It also checks that the beam has adequate shear capacity according to ACI code equations. The development length of the deformed bars is then calculated based on additional ACI equations.

Uploaded by

Jun Atienza
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Concrete Finite Check

This document summarizes the design of a beam using STAAD Pro software. It analyzes the beam reinforcement at the midspan and ends, checking that the provided steel area exceeds the minimum requirements. It also checks that the beam has adequate shear capacity according to ACI code equations. The development length of the deformed bars is then calculated based on additional ACI equations.

Uploaded by

Jun Atienza
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF Beam

STAAD Pro STRESS RESULT BEAM INFORMATION:


Mu (kN-m) Beam Height = 450 mm f'c = 34.5 MPa
LOCATION Q (kN)
End Mid fy = 414 MPa
Top Portion 13.00 4.00 Outer Conc. Cover, Ccout = 75 mm ρ max = 0.02509
29.00
Bottom Portion 1.00 9.00 Inner Conc. Cover, Ccinn = 75 mm ρ min = 0.00355
Unit Width, b = 250 mm As min(top) = 315 sq.mm
A. REINFORCEMENT AT MIDSPAN

use D16 @ 4 pcs


Asprov = 804 mm2
Mcap = 99.56 kN-m

Mu = 9.00 kN-m
Mu = ø b f'c dout² q ( 1 - 0.59 q )
9.00 ( 106 ) = 0.90( 1000.00 )(34.50 )( 355 )² q ( 1 - 0.59 q )
q = 0.0093
ρs = q f'c / fy = 0.00077 ; As = ρs bdout
As = 68 mm2
use As = 315 mm² (max of Asw vs. Asmin) < 804 mm² Ok.

B. REINFORCEMENT AT END

use D16 @ 4 pcs


Asprov = 804 mm2
Mcap = 99.56 kN-m

Mu = 13.00 kN-m
Mu = ø b f'c dinn² q ( 1 - 0.59 q )
13.00 ( 106 ) = 0.90 ( 1000 ) 3( 4.50 )( 355 )² q ( 1 - 0.59 q )
q = 0.0134
ρs = q f'c / fy = 0.00112 ; As = ρs bdout
As = 99 mm²
use As = 315 mm² (max of Asw vs. Asmin) < 804 mm² Ok.

C. CHECK FOR BEAM SHEAR (ACI Sec.11.3)


fc = 34.5 MPa tensile strength of shear Av = 226 mm2 shear bar area
fyt = 275 MPa tensile strength of shear d = 355 mm effective depth of beam
dv = 12 mm shear reinforcement diameter b = 250 mm width of beam
Set = 1 set of stirrups

Vu. = 29.00 KN
ФVc = 0.17 √f'c b d (Eq 11-3)
ФVc = 66.46 kN > 29.00 kN Ok. concrete adequate for shear resistance

Vs = 0.33 √f'c b d (Sect 11.4.7.9)


Vs = 86.01 KN
Sreq = ФAv * fyt * d / Vs
Sreq = 192.55

D. Development length for deformed bars

ldh = 0.7 * 0.24 * ψe * fy * db / ( λ* √f'c) (Sect 12.3.3)


ldh = 189.46 mm

You might also like