Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    AFD Enclosure Anchor Calcs

    Uploaded by

    Wesly Centerwall
    This document summarizes calculations for anchoring an enclosure to the roof of a structure. It provides information on the enclosure dimensions and weight, seismic design factors, and calculates the maximum anchor tension and shear forces. The overturning check shows overturning would occur. It recommends using 4 anchors that are 1/2 inch diameter Kwik Bolt TZ-CS anchors embedded a minimum of 3.25 inches to resist the calculated forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AFD Enclosure Anchor Calcs

    Uploaded by

    Wesly Centerwall
    24 views2 pages
    This document summarizes calculations for anchoring an enclosure to the roof of a structure. It provides information on the enclosure dimensions and weight, seismic design factors, and calculates the maximum anchor tension and shear forces. The overturning check shows overturning would occur. It recommends using 4 anchors that are 1/2 inch diameter Kwik Bolt TZ-CS anchors embedded a minimum of 3.25 inches to resist the calculated forces.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes calculations for anchoring an enclosure to the roof of a structure. It provides information on the enclosure dimensions and weight, seismic design factors, and calculates the maximum anchor tension and shear forces. The overturning check shows overturning would occur. It recommends using 4 anchors that are 1/2 inch diameter Kwik Bolt TZ-CS anchors embedded a minimum of 3.25 inches to resist the calculated forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    AFD Enclosure Anchor Calcs

    Uploaded by

    Wesly Centerwall
    This document summarizes calculations for anchoring an enclosure to the roof of a structure. It provides information on the enclosure dimensions and weight, seismic design factors, and calculates the maximum anchor tension and shear forces. The overturning check shows overturning would occur. It recommends using 4 anchors that are 1/2 inch diameter Kwik Bolt TZ-CS anchors embedded a minimum of 3.25 inches to resist the calculated forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    23 May 2022 18:05:35 - AFD Enclosure Anchor Calcs.

    sm
    _____________________________________________________________________________________________________________
    ADF Enclosure Anchor Calculations
    Component Information
    ADF Enclosure Information [Pro/Dwg# 270979: Pg. 1]
    Dry CG Height: CGh 48 in
    Dry CG X-Distance: CGx 9 in
    Anchor X-Spacing: dax 18 in
    Operating Weight: W 1500 lbf
    Overstrength Factor: Ω0 2.5 FP [ASCE 7-10: Tbl. 13.6-1]
    Component Amplification Factor: ap 1.0 [2141-L: Tbl. 3]
    W
    CGh
    Response Modification Factor: Rp 2.5
    Component Importance Factor: Ip 1.5 [2141-L: Tbl. 4]
    CGx
    dax
    Component Height in Structure: z 0.0 ft
    Site Information
    Spectral Acceleration: SDS 0.74 [2141-L: Tbl. 1]
    Roof Height of Structure: h 52.25 ft [2141-L: Tbl. 2]
    Seismic Design Force [ASCE 7-10: Eqn. 13.3-1]
    Limits:
    0.4 ap SDS W z Min.: FPmin 0.3 SDS Ip W 499.5 lbf
    Full Tank: FP 1 2 266.4 lbf
    Rp h
    Max.: FPmax 1.6 SDS Ip W 2664 lbf
    Ip
    Use: FP 499.5 lbf
    LRFD Anchor Forces (0.9 - 0.2SDS )D + 1.0E = 0.75D + 1.0E [ASCE 7-10: Sec. 12.4.2.3]
    Overturning Check (Negative Result => No Overturning)
    Full Tank: FP CGh 0.75 W CGx 1154.25 ft lbf
    "Overturning Present!"
    1/2
    23 May 2022 18:05:35 - AFD Enclosure Anchor Calcs.sm
    _____________________________________________________________________________________________________________
    Maximum Anchor Forces (To be entered into PROFIS for anchorage check – attached)
    Ω0 FP CGh 0.75 W CGx
    Tension: Tu 1383.75 lbf
    2 dax
    Ω
    0
    FP
    Shear: Vu 312.19 lbf
    4
    PROFIS Result
    Anchorage: Use (4) 1/2Φ KWIK Bolt TZ-CS, 3.25" Min. Embed
    2/2

    You might also like