Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Qassim University Unayzah College of Engineering: Question Number Mark

    Uploaded by

    Omar Ahmed
    This document contains a mechanical design exam with 4 questions. It provides instructions for students, including time limits and to read all problems first before starting. Question 1 calculates torque transmission for two shaft hub connections. Question 2 determines the maximum shaft diameter for a drive shaft based on power and rpm requirements. Question 3 involves calculations for bolt forces and deformations, as well as a diagram, for a pressure vessel cover connection. Question 4 finds the safe eccentric force for a welded joint given allowable shear stress dimensions. Tables of relevant data are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Qassim University Unayzah College of Engineering: Question Number Mark

    Uploaded by

    Omar Ahmed
    54 views8 pages
    This document contains a mechanical design exam with 4 questions. It provides instructions for students, including time limits and to read all problems first before starting. Question 1 calculates torque transmission for two shaft hub connections. Question 2 determines the maximum shaft diameter for a drive shaft based on power and rpm requirements. Question 3 involves calculations for bolt forces and deformations, as well as a diagram, for a pressure vessel cover connection. Question 4 finds the safe eccentric force for a welded joint given allowable shear stress dimensions. Tables of relevant data are also provided.

    Original Title

    ME 340_ MID 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a mechanical design exam with 4 questions. It provides instructions for students, including time limits and to read all problems first before starting. Question 1 calculates torque transmission for two shaft hub connections. Question 2 determines the maximum shaft diameter for a drive shaft based on power and rpm requirements. Question 3 involves calculations for bolt forces and deformations, as well as a diagram, for a pressure vessel cover connection. Question 4 finds the safe eccentric force for a welded joint given allowable shear stress dimensions. Tables of relevant data are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views8 pages

    Qassim University Unayzah College of Engineering: Question Number Mark

    Uploaded by

    Omar Ahmed
    This document contains a mechanical design exam with 4 questions. It provides instructions for students, including time limits and to read all problems first before starting. Question 1 calculates torque transmission for two shaft hub connections. Question 2 determines the maximum shaft diameter for a drive shaft based on power and rpm requirements. Question 3 involves calculations for bolt forces and deformations, as well as a diagram, for a pressure vessel cover connection. Question 4 finds the safe eccentric force for a welded joint given allowable shear stress dimensions. Tables of relevant data are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Qassim University
    Student Name: PIN
    Unayzah College of Engineering

    ME 340 MECHANICAL DESIGN

    2nd Mid Term Exam


    Question Number Mark
    Semester 382(1438-1439) H
    1

    Time: 90 minutes 3

    TOTAL MARK
    Date:

    Tuesday

    2/8/1439 H (17/4/2018)

    08:00-09:30 am
    Important

    1) Read all problems first, then start with the


    one you think is clearer and requires less time to
    solve.

    2) Solve the following questions.

    1
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Question 1# (15 Marks)

    Calculate the torque that can be transmitted by each shaft hub connection
    shown in the following figures:

    2
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Question 2# (15 Marks)

    The shaft in Figure is the drive shaft for a large, bulk material conveyor
    The gear receives 40 kw and rotates at 120 rpm. Each chain sprocket
    delivers 20 kw to one side of the conveyor. Determine the maximum
    shaft diameter, (ST50 with yield strength of 300 MPa and endurance limit
    of 200 MPa), (1 in = 25 mm)

    3
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Question 3# (15 Marks)

    A cover of a pressure vessel is fastened to its flange by 6 bolts. The


    stiffness of the bolt Cs = 200 KN/mm and of the tight parts Cp = 400
    KN/mm. The initial tightening force each bolt is 30 KN. The internal
    pressure of the vessel P = 15 MPa, the open area of the vessel with 120
    mm diameter. The material class of the bolt is 8.8.

    a. Find the acting force on the bolt and the tight parts before and
    after effect of internal pressure.
    b. Find the deformation of the bolt and the tight parts before and
    after effect of internal pressure.
    c. Draw the force deformation diagram to scale for the
    connection showing all the details of all force and
    deformation.
    d. Calculate the required bolt diameter based on factor of safety
    S of 2.
    e. Find the leakage pressure.

    4
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Question 4 # (15 Marks)

    The figure shows a weldment subjected to an eccentric force F. Find the


    safe force F if the allowable shear stress in the welds is τallow = 140 MPa.
    The dimesions b, c, d, and h are 120, 200, 80, and 6, respecively.

    5
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    Data Sheet

    6
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    7
    ME 340 (MECHANICAL DESIGN) SECOND MID TERM EXAM

    You might also like