TCP MCQ Sample Question

Module: 1
1) ------------ is the built up covered area of a building measured at floor level of any storey.
a) Covered area
b) Total area
c) Plinth area
d) Carpet area
2) ----------- area of a building is the verandahs, passage, corridors, balconies, porches,etc
a) Floor area
b) Horizontal circulation area
c) Vertical circulation area
d) Verandah
3) Drawing room should be light and ventilated and located in heart of the building.
a) True b) False
4) Kitchen should be placed opposite direction to the prevailing wind.
a) True b) False
5) Bedroom should not be placed on the sides of the building.
a) True b) False
Module: 2
6) The Great Bath of the Harappa Civilizations has been found at
a) Mohenjodaro
b) Harappa
c) Rangpur
d) Kalibangan
7) Types Of Growth Of Town according to ________
a) Origin
b) Direction
c) origin and Direction
d) none of the above
8) In town Concentric spread growth ___________.

a) Development around the town
b) Development around the center
c) Development in center
d) Development of periphery of the town
9) Vital Survey ____________________ aspects are studied under this survey
a) population b) Topography c) Birth rate d) all of the above
10) The father of Indian town planning is
a) Jawahar lal Nehru b) Mahatma Gandhi c) B.R. Ambedkar d) M. Vishveshshwariah
Extra)Which of the following governs the implementation of the Town Planning Schemes in
Maharashtra?
a.) Maharashtra Regional and Town Planning Act, 1966
b.) Maharashtra Housing and Area Development Act, 1976
c.) Maharashtra Municipality Act, 1985
d.) Bombay Provincial Municipal Corporation Act, 1949
Extra) Which of the following does NOT have the status of Planning Authority in Maharashtra?
a.) CIDCO
b.) MIDC
c.) Airports Authority of India
d. )SRA
Extra) Characteristics of CBD is a
a) Land values are very high
b) Tallest buildings
c) Shortage of car parking space
d) all of the above
Module: 3
11) The master plan of Chandigarh was prepared by
a) Maxwell Fry
b) Albert Mayer
c) Le Corbusier
d) Maciej Nowicki
12) On which factor does the economic development of a region depends?
(i) Relief
(ii) Climate
(iii) Population
(iv) Resources
13) Aim of regional planning is
(i) develop agriculture

(ii) to improve roads
(iii) to reduce regional imbalance
(iv) to develop industry
14) Regional planning relates to
(i) Area differences in the transportation network

(ii) Development of rural areas
(iii) Development of various sectors of the economy
(iv) Area-specific approach of development
15) In which state in Bharmaur Tribal Region situated?

(i)Uttarakhand
(ii) Jammu & Kashmir
(iii) Himachal Pradesh
(iv) Uttar Pradesh
Module: 4
16) Municipal Corporations, Municipal Councils and Nagar Panchayats are three types of_ local
Governments
(a) Rural (b) Urban
17) A city should be divided into suitable zones such as __________.
a) recreation zone
b) industrial zone and recreation zone
c) residential zone, commercial zone
d) residential zone, commercial zone, industrial zone and recreation zone
18) Industrial estate maybe located out side of the town.

a) True b) False
19) Who can set up an SEZ?
a) Private Developer
b) PSU /State Government
c) Joint Sector Company
d) All the above
20) What is the area prescribed by the government of India for a housing unit for
economically weaker section?
a) Upto 300 sq. ft. b) Upto 450 sq. ft. c.) Upto 600 sq. ft. d) Upto 750 sq. ft.
Extra) Apartments in co operative housing belong to

a) Individual
b) Community
c) Govt.
d) Institution
Module: 5
21) Which of the following is a part of Social Infrastructure?
a) Water supply services
b) Play Ground
c) SWM facility
d) Road & Transportation
22) Which of these is not a part of Sewage and Sanitation?
a.)Septic Tank
b.) Soak Pit
c.) Land Fill
d.) Piping System
23) In a building, to provide ultimate comfort to occupants ________ can be used.
a) AC
b) HVAC
c) Ventilators
d) HAC
24) As per IS : 1172-1963, water required per head per day for average domestic purposes, is
A. 50 litres
B. 65 litres
C. 85 litres
D. 105 litres
E. 135 litres.
25) The sewers should be laid ______
a) Below the building
b) Side of the building
c) Within the building
d) Across the building
Module: 6
26) Consider the following statements
1. A 'smart city' is an urban region that is highly advanced in terms of overall infrastructure,
sustainable real estate, communications and market viability.
2. It will provide real time information on parking, traffic congestion, public transport
3. Smart cities will be energy efficient and will have low carbon foot print
Which of the above statements is/are correct?
a.) 1,2
b.) 2,3
c. )1,3
d. ) All
27) In the round 2 of Smart City Mission which city tops the list?
a.) Amritsar
b. Ujjain
c. Rourkela
d. Nagpur
28) What does “smart city” mean to you?
a) a) A new buzzword only for rich countries which will soon pass
b) A local authority that uses digital technology as a tool for its sustainable and
inclusive urban development strategy
c) An automated and data-controlled city, made of sensors and servers sold by
digital firms
29) What are the core objectives of Smart cities?
(A)Clean and sustainable environment
(B)Apply smart Answers
(C)Quality of life
(D)All the above
30) Which of these are ways that smart cities can use data?
(A)Offering convenience to all residents AND visitors
(B)Controlling costs by conserving resources
(C)Identifying where city services are needed
(D)All the above
Module: 1
Software Based MCQ (TCP – AUTOCAD)
1) The tool ______ is used to cut things down, but not completely erase the entire object. The
________ tool used to make a line/circle/arc/polygon reach a certain located point if it is not
touching.
a) Extend, Trim
b) Trim, Extend
c) Copy, Erase
d) Cut, Paste
 2) Which is latest version of Autocad software

 a) AutoCAD 2018
 b) AutoCAD 2019
 c) AutoCAD 2020
 d) AutoCAD 2021
3) To obtain parallel lines, concentric circles and parallel curves _____is used.
 a) Copy
 b) Fillet
 c) Offset
 d) None of the Above
4) What are the advantages of AutoCAD?
 a) Improve the quality of designs

 b) Increase the productivity of the designer
 c) Creates drawings with accuracy and quickly
 d) All of the above

TCP MCQ Sample Question

Uploaded by

Copyright:

Available Formats

TCP MCQ Sample Question

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TCP MCQ Sample Question

Uploaded by

Copyright:

Available Formats

Module: 1

7) Types Of Growth Of Town according to ________

c) origin and Direction

d) none of the above

8) In town Concentric spread growth ___________.

11) The master plan of Chandigarh was prepared by

12) On which factor does the economic development of a region depends?

13) Aim of regional planning is

(i) develop agriculture

14) Regional planning relates to

(i) Area differences in the transportation network

15) In which state in Bharmaur Tribal Region situated?

b) industrial zone and recreation zone

c) residential zone, commercial zone

d) residential zone, commercial zone, industrial zone and recreation zone

18) Industrial estate maybe located out side of the town.

Extra) Apartments in co operative housing belong to

Which of the above statements is/are correct?

28) What does “smart city” mean to you?

Software Based MCQ (TCP – AUTOCAD)

 2) Which is latest version of Autocad software

4) What are the advantages of AutoCAD?

 a) Improve the quality of designs

You might also like