Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Industry Standard Sized Laser Sensors With Built-In Amplifiers

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

272

Amplifier built-in type


Industry standard sized
Z-L series laser sensors with built-in amplifiers
Same low cost as LED light source types
Laser class 1 for through-beam type
Outstanding environmental resistance

BGS type Amplifier separate type LED light source


Related
products BGS-ZL DS Z3
P.326 P.280 P.148

Selection table
Sensing distance Model (Models in parentheses are connector types)
Type Shape (Adjustable distance range shown Light source
in parentheses) NPN type PNP type

Laser
30 m
Class 1 ZT-L3000N ZT-L3000P
Through-beam laser (ZT-L3000CN) (ZT-L3000CP)
Laser
0.2 to 10 m
Class 2 ZR-L1000N ZR-L1000P
Retro-reflective laser (ZR-L1000CN) (ZR-L1000CP)
Laser
400 mm
Class 2 ZD-L40N ZD-L40P
Diffuse-reflective laser (ZD-L40CN) (ZD-L40CP)

 to 100 mm
5 BGS-ZL10N BGS-ZL10P
(BGS-ZL10CN) (BGS-ZL10CP)
(20 to 100 mm)
Laser Class 1 P.326 P.326
BGS laser
 0 to 300 mm
1 BGS-ZL30N BGS-ZL30P
(BGS-ZL30CN) (BGS-ZL30CP)
(50 to 300 mm)
P.326 P.326

 For the connector type, please purchase an optional JCN series connector cable.

Options/Accessories Protective mounting bracket


 Ultra-durable 2 mm thick type  Rust-resistant
Connector cables
Straight L-shaped
stainless steel  Sensor is firmly secured using an
Reflector M3 Hex socket head cap screws  The bracket is
Standard Small (optional) Ultra-small (optional) also firmly secured using M6 screw JCN-S JCN-L
Cable length: 2 m Cable length: 2 m
P250F PL20F PL10F JCN-5S JCN-5L
Sensing distance: Sensing Sensing Cable length: 5 m Cable length: 5 m
0.2 to 10 m distance: distance: JCN-10S JCN-10L
61 × 51 mm 0.2 to 8 m 0.2 to 7 m LK-S02 LK-S01 Cable length: 10 m Cable length: 10 m
Included with 60 × 20 mm 32 × 20 mm
retro-reflective type
Parts cut sizing Hole drilling detection for metal parts Liquid crystal glass mapping
Amplifier built-in type Z-L series
273
Small spot size that can be achieved by lasers
Approx. ø2 mm spot size at a distance of
400 mm (diffuse-reflective type)

Photoelectric
Optimal for applications that in which small object detection

Sensors
and high repeat accuracy are required.

For high-speed lines Photoelectric


Sensors
Response time: 250 μs
The laser sensor provides a top class response time.
Specialized
This feature makes detection in high speed production line Photoelectric
possible. Sensors

Laser
Displacement
Sensors

Laser Sensors

Z-L
Outstanding environmental resistance DS
Degree of protection: IP67, Shock resistance: 50 G
Its integrally molded structure enables all models to conform D
to IP67 and achieve a shock resistance up to 50 G. It
doesn’t break even when wet and can be used in locations
where vibrations are generated.

Standard specification size


25.4 mm standard pitch
Features an industry standard
25.4 mm

pitch of 25.4 mm.


274 Amplifier built-in type Z-L series

Specifications
Photoelectric

Type Through-beam type Retro-reflective type Diffuse-reflective type


Sensors

Cable type ZT-L3000N ZR-L1000N ZD-L40N


NPN
Connector type ZT-L3000CN ZR-L1000CN ZD-L40CN
Model
Cable type ZT-L3000P ZR-L1000P ZD-L40P
PNP
Connector type ZT-L3000CP ZR-L1000CP ZD-L40CP
Sensing distance 30 m 0.2 to 10 m*1 400 mm*2
Red semiconductor laser Red semiconductor laser
Class 1 (IEC/JIS) *3
Light source Class 2 (IEC/JIS) *3
Wavelength: 650 nm,
Maximum output: 390 μW Wavelength: 650 nm, Maximum output: 3 mW
Photoelectric Spot size Approx. ø2 mm*4 Approx. ø2.5 mm*4 Approx. ø2 mm*4
Sensors
(at focal distance) Distance: 2 m (at ordinal temperatures) Distance: 2 m (at ordinal temperatures) Distance: 400 mm (at ordinal temperatures)
Specialized Response time 250 μs or less
Photoelectric
Sensors Hysteresis — 20%
Distance adjustment 1-turn potentiometer
Laser
Displacement Indicators Output indicator (orange LED), Laser emission indicator (green LED: stability indicator for through-beam type receiver)
Sensors
Control output NPN/PNP type Open collector Max. 100 mA/30 VDC
Output mode Light ON / Dark ON selection switch
Laser Sensors Connection type Cable type: Cable length: 2 m ø3.8 mm / Connector type: M8, 4-pin
Supply voltage 10 to 30 VDC, including 10% ripple (p-p)
Rating

Z-L
Emitter: 15 mA or less
Current consumption 20 mA or less
DS Receiver: 15 mA or less
Applicable regulations EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10)
D
Applicable standards EN 60947-5-2
Company standards Noise resistance: Feilen Level 3 cleared
Ambient temperature/humidity -10 to +50°C (no freezing) / 35 to 85% RH (no condensation)
Environmental
resistance

Ambient illuminance Sunlight: 10,000 lx/Incandescent lamp: 3,000 lx


Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
Shock resistance Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
Degree of protection IP67
Material Housing: ABS (glassfiber reinforced), Front cover: PMMA
Weight without cable Approx. 20 g Approx. 10 g
Mounting bracket: BEF-W100-B*5
Included accessories Mounting bracket: BEF-W100-B*5 Mounting bracket: BEF-W100-B*5
Reflector: P250F
*1. With P250F reflector *2. 100 mm × 100 mm white paper *3. Classified as class II in the US FDA standards
*4. Defined with center strength 1/e2 (13.5%).
There may be light leakage outside of the specified spot size. The sensor may be affected when there is a highly reflective object
close to the target area.
*5. Mounting bracket BEF-W100-A is included with the connector type.
 Specifications are subject to change without prior notice for product improvement purposes.
Amplifier built-in type Z-L series
275

Output circuit diagram


Retro-reflective type/Diffuse-reflective type

Photoelectric
 NPN output type  PNP output type

Sensors
Brown: 1 Brown: 1
10 to 30 VDC 10 to 30 VDC

Protection
circuit
Load

Main circuit
Main circuit

Black: 4 Black: 4
Control output Control output

Load Photoelectric
Protection
circuit Sensors
Blue: 3 Blue: 3
0V 0V Specialized
Photoelectric
Sensors
Through-beam type receiver Laser
 NPN output type  PNP output type Displacement
Brown: 1 Sensors
Brown: 1
10 to 30 VDC 10 to 30 VDC

Protection Laser Sensors


circuit
Load
Z-L
Main circuit
Main circuit

Black: 4 Black: 4
Control output Control output DS

D
Load
Protection
circuit
Blue: 3 Blue: 3
0V 0V

Through-beam type emitter  Connector type


Brown: 1 (Pin configuration) Sensor side Connector cable side
10 to 30 VDC
1 10 to 30 VDC
2 4 4 2
2—
1 3 3 1 30V
4 Control output
Main circuit

Connecting
 1 to 4 are connector pin No.

Notes
 When using a switching regulator for the power
supply, be sure to ground the frame ground
terminal.
Blue: 3  Avoid wiring in parallel with or in the same piping
0V as high-voltage wires or power lines. Doing so
may lead to malfunctions caused by noise. Also,
shorten the power supply and signal wires as
much as possible.
 Avoid using the transient state while the power is
on (approx. 100 ms).
 The connector direction is fixed as in the drawing
to the right when you use L-shaped connector
cable. Be aware that rotation is not possible.
276 Amplifier built-in type Z-L series

Dimensions
Photoelectric

Sensor (Unit: mm)

 Cable type
Sensors

Distance adjustment
Output indicator (orange)
(none in the case of through-beam type emitter)
Laser emission indicator (green) Light ON / Dark ON
(stability indicator for through-beam type receiver) selection switch
Through-beam type light axis center 11
Optical axis of receiver, 0.4
20
retro/diffuse-reflective type 3

2-M3
Tightening torque:
Photoelectric 31 25.4
0.5 N·m or less
Sensors 19.8
13.4

Specialized
Photoelectric Optical axis of emitter, 2.8
Sensors
retro/diffuse-reflective type ø3.8, 3-wire × 0.2m2
Laser (2-wire × 0.2 mm2 for through-beam type emitter)
Displacement
Sensors
Reflector
 P250F (included with ZR-L1000N)  PL20F (optional)  PL10F (optional)
Laser Sensors
51 20 6.5 20
Z-L 47 16 3 18.2 3.5
2-ø3.8
DS 2

D 2-ø7.5 2-ø4.4 32 26 18
51 47 60 50 38
61
4.5

3.5
5
2-R2.25 20 2-R2.25
6.1
40

Connector cable (optional)


 JCN-S, JCN-5S, JCN-10S  JCN-L, JCN-5L, JCN-10L

ø4.7, 4-wire × 0.325 mm2


ø4.7, 4-wire × 0.325 mm2 PVC (vinyl)
PVC (vinyl)

ø9.8 ø9.8

30.5 “L” 22.8 “L”

18.8
Amplifier built-in type Z-L series
277

Photoelectric
Mounting bracket
 Cable type (when using BEF-W100-B)

Sensors
(Unit: mm)
21.2
15.5
4.4 7.7

16
10 7.3

1.2 11 Photoelectric
0.4
20 Sensors
Through-beam type light axis center
Optical axis of receiver,
retro/diffuse-reflective type Specialized
Photoelectric
Sensors
31 25.4 2-M3
Laser
Tightening torque: Displacement
32.2 0.5 N·m or less Sensors
25.8

12.4
Laser Sensors
Optical axis of emitter,
BEF-W100-B ø3.8, 3-wire × 0.2m2
retro/diffuse-reflective type Z-L
included with cable type (2-wire × 0.2 mm2 for through-beam type emitter)

DS

 Connector type (when using BEF-W100-A) D


1.2

Through-beam type light axis center


14 11
Optical axis of receiver,
8.2
29.3
retro/diffuse-reflective type
0.4 20
4.4

5.8
32.4 26 31 25.4
2-M3
1.7 19.8
12.6 13.4 Tightening torque:
0.5 N·m or less

5.2 3 0.7
10.3 BEF-W100-A
included with connector type
13.3
Optical axis of emitter,
retro/diffuse-reflective type M8, 4-pin connector
278 Amplifier built-in type Z-L series

Typical characteristic data *Contact us for any other characteristic data that may be required.

ZT-L3000
Photoelectric
Sensors

Excess gain Sensing area Angular deviation


50
 Receiver angle  Emitter angle
40 50 Receiver
100 Receiver

Operating point Y (mm)

Sensing distance Y (m)


30 Y Y
40 Emitter Emitter
20
Excess gain

10
30
0
10 10 20 30 40 50
10
20
20

30 X
10
Emitter
Y
40 Receiver
1
Operation level 0
50
0 10 20 30 40 40 30 20 10 0 10 20 30 40
Photoelectric
Sensing distance (m) Sensing distance X (m) Operating angle (°)
Sensors
Interference area Spot size
140
Specialized
Photoelectric 120
Sensors
Approx. 30 mm
100
Distance Y (mm)

Optical plane
Approx. 20 mm
Approx. 10 mm
Laser 80
Displacement
Sensors 60
No interference area

40
X Receiver
Emitter
Laser Sensors 20
Y
Interference area

0 5 10 15 20 25 30 35 0 10 20 30
Z-L Sensing distance X (m) Sensing distance (m)

DS

D ZR-L1000

Excess gain Sensing area Angular deviation


50
 Reflector angle  Sensor angle
40 Reflector: P250F Reflector: P250F
100 12
30
Sensing distance X (m) θ
Distance Y (mm)

10 X X
θ
Excess gain

P250F 20
PL20F
10 8
PL10F
0
10 2 4 6 8 10 12 14 6
10

20 4

30 Y Reflector: 2
40 X P250F
Operation level 0
50 40 30 20 10 0 10 20 30 40
0 2 4 6 8 10 12 14
Sensing distance (m) Sensing distance X (m) Operating angle (°)

Interference area Spot size


35

30

Approx. 12 mm
Distance Y (mm)

25 Approx. 6 mm
Optical plane

20 No interference area
P250F
15

10
X
Reflector
5
Interference area Y

0 2 4 6 8 10 12 14 0 2 4 6 8 10
Sensing distance X (m) Sensing distance (m)
Amplifier built-in type Z-L series
279

ZD-L40

Photoelectric
Sensors
Excess gain Sensing area Angular deviation
5
White paper 100 × 100 mm 90%
4 500 (reflection rate)
100

Sensing distance X (mm)


3
White paper: 400 X

Distance Y (mm)
θ
Reflection rate 90% 2
Excess gain

Gray paper: 1
Reflection rate 18% 300
Black paper: 0
10 100 200 300 400 500
Reflection rate 6%
1 200
2 Y
3 100
X
4 White paper 100 × 100 mm 90%
Operation level (reflection rate) 0
5 80 60 40 20 0 20 40 60 80
0 100 200 300 400 500 600
Sensing distance (mm) Sensing distance X (mm) Operating angle (°)
Photoelectric
Sensors
Interference area Spot size
70
White paper 100 × 100 mm 90% Specialized
60
(reflection rate)
X
Photoelectric
Sensors
Distance Y (mm)

50 Y Approx. 2 mm
Optical plane

Approx. 1.5 mm Laser


40
Displacement
30
Sensors
No interference area
20

10 Interference area Laser Sensors

0 100 200 300 400 500 600 700 0 100 200 300 400 500
Sensing distance X (mm) Sensing distance (mm) Z-L

DS

Notes for sensor usage

Do not look directly at the laser or intentionally shine the laser beam in ■ Regarding the laser label, this product
Warning another person’s eyes. Doing so may cause damage to the eyes or health. emits a Class 2 (II) visible laser beam that
is compliant with JIS C6802/IEC/FDA
ZR-L1000N ZT-L3000N laser safety standards. A CLASS
2/CLASS II warning label and explanation
ZD-L40N label (English) is affixed to the side of the
sensor head.
*The ZT-L3000N emitter is Class II in FDA standards
(when exported to the United States), but is Class 1
according to JIS/IEC standards, so change the label that
it is packaged with for use.

You might also like