Power Transmission Belts

pixtrans pixtransmission pix-group pixtrans

www.pixtrans.com
WRAPPED BELTS
Wrap Construction Belts
X’set®
CLASSICAL SECTION BELTS
Top Min. Mfg.Range Belt Length Factor
Width Thickness Angle Pulley Dia.
Length
Section (mm) (Degree) Lp to La Li to Lp Li to La Desig.
(mm) (mm) Min. Max.
(mm) (mm) (mm)
8 8.0 5.0 40 40 39" 171" 12 19 31 Li
Z 10.0 6.0 40 50 16" 172" 16 22 38 Li
A 13.0 8.0 40 71 16" 357" 14 36 50 Li
B 17.0 11.0 40 112 16" 926" 26 43 69 Li
Reference Standards: 20 20.0 13.0 40 160 31.5" 927" 31 48 79 Li
• IS 2494, BS 3790, ISO 4184 C 22.0 14.0 40 180 31" 927" 32 56 88 Li
• DIN 2215-1975 25 25.0 16.0 40 250 57" 361" 39 61 100 Li
• RMA IP-22 D 32.0 19.0 40 355 44.5" 928" 40 79 119 Li
• RMA IP-23 E 38.0 23.0 40 500 90" 930" 53 92 145 Li
• DIN 7753 WEDGE SECTION BELTS
SPZ 10.0 8.0 40 63 479mm 4000mm 13 37 50 Lp
Application: SPA 13.0 10.0 40 90 576mm 9113mm 18 45 63 Lp
Industrial drives, generators, SPB 17.0 14.0 40 140 1000mm 23580mm 28 60 88 Lp
blowers, ball-mills, rolling 19 19.0 15.0 40 180 2253mm 9137mm 25 69 94 Lp
mills, crushers, compressors, SPC 22.0 18.0 40 224 1861mm 23654mm 30 83 113 Lp
pumps, wet grinders, NARROW SECTION BELTS
household appliances, 3V 9.7 8.0 40 63 19.5" 160" 13 37 50 La
cement industry, 5V 15.8 13.5 40 140 48" 929" 25 60 85 La
steel industry, etc. 8V 25.4 23.0 40 335 101" 934" 53 92 145 La
LIGHT DUTY SINGLE V-BELTS
3L 9.7 5.6 40 45 17" 173.5" 16 22 38 La
4L 12.7 7.9 40 65 18" 359" 14 36 50 La
5L 16.7 9.7 40 91 21" 199" 26 43 69 La

Features:
• Special CR treated outer jacketing fabric for higher durability
• Anti-static, oil and heat resistant
• Maximum Belt linear speed (Classical section: Up to 30 m/Sec, Wedge section: up to 42
m/Sec, Narrow section: up to 45 m/Sec)
• Temperature range: -18°C to +80°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

MUSCLE®-XS3 High-power, Maintenance-free, Wrap Belts

Top Angle Manufacturing Range Length
Width Thickness
Section (mm) (Degree) Designation
(mm) Min. Max.
MF3-SPZ 10.0 8.0 40 479mm 4000mm Lp
MF3-SPA 13.0 10.0 40 576mm 9113mm Lp
MF3-SPB 17.0 14.0 40 1000mm 23580mm Lp
MF3-SPC 22.0 18.0 40 1861mm 23654mm Lp
MF3-3V 9.7 8.0 40 19.5" 160" La
MF3-5V 15.8 13.5 40 48" 929" La
Reference Standards: MF3-8V 25.4 23.0 40 101" 934" La
• BS 3790, ISO 4184
• RMA IP-22 Features:
• Extremely high power rating - up to 50% more than standard Belts
Application: • High efficiency up to 98%
Hot rolling mills, power plants,
• Special cords for maintenance-free operation
heat exchanger, compressors,
vacuum pumps, grinders, • Extended service life and less machine down-time
kilns, blenders, paper & pulp • Anti-static complies with ISO 1813
industry, etc. • Superior oil and heat resistance
• REACH and RoHS compliant, provides an eco-friendly system
• Extended temperature range from -25°C to +100°C

1
WRAPPEDHeavy-duty,
BELTS High-power, Wrap Belts
Terminator®-XS
Top Min. Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Pulley Dia.
(mm) (mm) Min. Max. Desig.
TR-A 13.0 8.0 40 90 16" 357" Li
TR-B 17.0 11.0 40 112 16" 926" Li
TR-C 22.0 14.0 40 180 31" 927" Li
TR-SPA 13.0 10.0 40 90 576mm 9113mm Lp
TR-SPB 17.0 14.0 40 140 1000mm 23580mm Lp
TR-SPC 22.0 18.0 40 224 1861mm 23654mm Lp
TR-3V 9.7 8.0 40 63 19.5" 160" La
Reference Standards: TR-5V 15.8 13.5 40 140 48" 929" La
• BS 3790, ISO 4184, TR-8V 25.4 23.0 40 335 101" 934" La
• RMA IP-22
Features:
Application: • Superior power transmission capacity- Up to 55% more than the standard Belts
Vibrating screens, reclaimers, • Especially treated outer tough fabric cover reduces sidewall wear rate and offers
pulverisers, heavy duty mixers, enhanced flexibility
forestry woodcutters, wood • Special frictionless fabric and design to enhance heat dissipation rate
chippers, surface miners, • Special aramid cords for high tensile strength and minimum elongation
stackers, stone crushers,
• Designed to exhibit excellent durability, strength, abrasion and wear resistance
jaw crushers, cone crushers,
ball-mills, etc. • Superior performance under heavy shock and impulse loads
• Extended temperature range: -25°C to +100°C

DUO®-XS Double-sided, Hexagonal Wrap Belts

Top Min. Pulley Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Diameter Desig.
(mm) (mm) Min. Max.
AA 13.0 10.0 40 80.0 46" 254" Le
BB 17.0 14.0 40 125.0 40" 924" Le
CC 22.0 17.0 40 224.0 73" 924" Le
25 25.0 22.0 40 280.0 88" 925" Le
DD 32.0 25.0 40 355.0 158” 900" Le
Reference Standard:
• IS 11038-1984 Features:
• Enhanced product life
Application: • Transmits power from both sides of the Belt
Rice mills, husker machines, • Centre cord provides excellent power transmission and low-stretch
serpentine drives, poultry • Special design provides an excellent flexibility for serpentine drives
feather-pickers, dyeing units, • Temperature range: -18°C to +80°C
etc.
• Intermediate sizes are available upon request

DUO®-XS-N Double-sided, Hexagonal, Wrap Notched Belts

Top Min. Pulley Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Diameter Desig.
(mm) (mm) Min. Max.
N-CC 24.0 30.0 40 224.0 153" 927" Lp

Features:
• Special notch provides high flexibility and extended service-life
Reference Standard: • High dimensional stability restricts twisting of Belts on longer-span drive
• PIX proprietary • Smooth and noise-free operation
• Remaining all features are same as PIX-Duo®-XS Belt
Application:
Textile drying machine

2
WRAPPED BELTS
Fire-resistant, Anti-static, Wrap Belts
FRAS®-XS
Belt Type Sections

Classical FRAS-8, FRAS-Z, FRAS-A, FRAS-B, FRAS-20, FRAS-C, FRAS-25, FRAS-D, FRAS-E
Wedge FRAS-SPZ, FRAS-SPA, FRAS-SPB, FRAS-19, FRAS-SPC
Narrow FRAS-3V, FRAS-5V, FRAS-8V
Classical Banded FRAS-HA, FRAS-HB, FRAS-HC, FRAS-HD
Wedge Banded FRAS-HSPZ, FRAS-HSPA, FRAS-HSPB, FRAS-HSPC
Narrow Banded FRAS-H3V, FRAS-H5V, FRAS-H8V
Reference Standards:
• ATEX Certified Features:
• IS 2494 Part-II
ATEX
Certified • Ensures high level of protection against fire hazards
• ISO 1813, BS 3790 • Fire resistance properties complies as per IS 2494 Part-II standard
• ISO 5290, ISO 5291 • Anti-static values found 10 to 15 times superior than the maximum limit, as per ISO
• ISO 4148, RMA IP-22 1813
• DIN 7753, DIN 2215 • ATEX certified
• Resistance to emit inflammable substances, while in operation
Application: • Longer service-life
Petrochemical industries,
• Anti-static, oil and heat resistant
coal mines, fire-prone areas,
gas stations, applications • Extended temperature range: -25°C to +100°C
involving inflammable
substances, etc.

IGLOO®-XS Low-temperature Wrap Belts

Belt Type Sections

Classical IG-Z, IG-A, IG-B, IG-C

Wedge IG-SPZ, IG-SPA, IG-SPB, IG-SPC
Narrow IG-3V, IG-5V, IG-8V
Classical Banded IG-HA, IG-HB, IG-HC
Wedge Banded IG-HSPZ, IG-HSPA, IG-HSPB, IG-HSPC
Reference Standards: Narrow Banded IG-H3V, IG-H5V
• BS 3790, IS 2494, ISO 4184
• RMA IP-22, ISO 5290 Features:
• ISO 5291 • Excellent performance while operating in extremely low ambient temperatures
• Longer service-life
Application:
• Excellent crack resistance properties to ensure smooth operation in low temperature
Cooling tunnels, cold storages,
low ambient temperature applications
drives, etc. • Temperature range: -45°C to +80°C

DryCover® Dry-cover Wrap Belts

Belt Type Sections

Classical DC-A, DC-B, DC-C, DC-D

Wedge DC-SPZ, DC-SPA, DC-SPB, DC-SPC
Narrow DC-3V, DC-5V
Light Duty Belts DC-3L, DC-4L, DC-5L
Reference Standards: Features:
• BS 3790
• RMA IP-22, RMA IP-23
• Frictionless cover, suitable for drives with clutching application
• Designed for applications, where dust formation is not acceptable
Application: • Available in aramid and polyester cord constructions
Food industry, clutch drives, • Available in different colours - blue, green, brown, black and white
etc. • Temperature range: -18°C to +80°C

3
WRAPPEDBanded
BELTSWrap Belts
DuraBand®-XS
Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
HA 13.0 10.5 40 15.9 33" 255" Li
HB 17.0 14.5 40 19.0 43" 900" Li
HC 22.0 17.0 40 25.5 47" 923" Li
HD 32.0 21.5 40 37.0 90" 923" Li
HE 38.0 27.0 40 44.5 90" 922" Li
Reference Standards: HSPZ 10.0 10.0 40 12.0 1180mm 9080mm Lp
• ISO 5290, BS 3790 HSPA 13.0 12.0 40 15.0 959mm 4439mm Lp
• RMA IP-22 HSPB 17.0 17.0 40 19.0 1762mm 9331mm Lp
HSPC 22.0 22.5 40 25.5 1632mm 23527mm Lp
Application: H3V 9.7 10.5 40 10.3 45" 176" La
Crushers, pulverisers, pulpers, H5V 15.8 16.5 40 17.5 50" 923" La
compressors, vibrating H8V 25.4 25.0 40 28.6 100" 926" La
screens, generators, rolling
mills, etc. Features:
• Enhanced power transmission capacity up to 25%, compared to standard Belts
• Lesser number of Belts is required as compared to multiple single-belt drive system
• Extended service-life
• Top curvature provides superior adhesion and accelerated heat dissipation rate
• Controlled radial and lateral run-out, facilitates smooth operation
• Anti-static, oil and heat resistant
• Temperature range: -18°C to +80°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

MUSCLE®-HXS3 High-power, Maintenance-free, Banded Wrap Belts

Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
MF3-HSPZ 10.0 10.0 40 12.0 1180mm 9080mm Lp
MF3-HSPA 13.0 12.0 40 15.0 959mm 4439mm Lp
MF3-HSPB 17.0 17.0 40 19.0 1762mm 9331mm Lp
MF3-HSPC 22.0 22.5 40 25.5 1632mm 23527mm Lp
MF3-H3V 9.7 10.5 40 10.3 45" 176" La
MF3-H5V 15.8 16.5 40 17.5 50" 923" La
MF3-H8V 25.4 25.0 40 28.6 100" 926" La

Reference Standards: Features:

• BS 3790, ISO 4184 • Superior power transmission capacity up to 60% more than standard single Belts
• RMA IP-22 • Especially engineered cords for maintenance-free operation
• Superior compound design for high thermal resistance and extended service-life
Application:
Hot rolling mills, power plants, • Top curvature provides superior adhesion and accelerated heat dissipation rate
heat exchanger, compressors, • Controlled radial and lateral run-out facilitates smooth operation
vacuum pumps, grinders, • Anti-static oil and heat resistance
kilns, blenders, paper & pulp • REACH and RoHS compliant, provides an eco-friendly system
industry, etc. • Extended temperature range from -25°C to +100°C

4
WRAPPED Heavy-duty,
BELTSHigh-power, Banded Wrap Belts
Terminator®-HXS
Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
TR-HA 13.0 10.5 40 15.9 33" 255" Li
TR-HB 17.0 14.5 40 19.0 43" 900" Li
TR-HC 22.0 17.0 40 25.5 47" 923" Li
TR-HSPA 13.0 12.0 40 15.0 959mm 4439mm Lp
TR-HSPB 17.0 17.0 40 19.0 1762mm 9331mm Lp
Reference Standards: TR-HSPC 22.0 22.5 40 25.5 1632mm 23527mm Lp
• BS 3790, ISO 5290, ISO 5291 TR-H5V 15.8 16.5 40 17.5 50" 923" La
• RMA IP-22 TR-H8V 25.4 25.0 40 28.6 100" 926" La

Features:
Application:
• Superior power transmission capacity - Up to 70% more than standard single Belts
Vibrating screens, reclaimers,
pulverisers, heavy duty mixers, • Especially treated outer tough fabric cover reduces sidewall wear rate and offers
forestry woodcutters, wood enhanced flexibility
chippers, surface miners, • Top curvature profile and special frictionless fabric to enhance the heat dissipation rate
stackers, stone crushers, • Special aramid cords for high tensile strength and minimum elongation
jaw crushers, cone crushers, • Designed to exhibit excellent durability, strength, abrasion and wear resistance
ball-mills, etc. • Best suited for heavy shock and impulse load drives
• Extended temperature range: -25°C to +100°C

X’set®-VS Variable-speed Wrap Belts

Angle Manufacturing Range Length
Section (Degree) Designation
Min. Max.
25x13 / HI 30 1133 mm 6505 mm Lp
32x15 / HJ 30 1192 mm 8240 mm Lp
38x18 / HK 30 1500 mm 9170 mm Lp
45x20 / HL 30 1608 mm 6663 mm Lp
51x22 / HM 30 1891 mm 10088 mm Lp
Reference Standards:
• ISO 3410:1989 / Non-standard sizes
13x11 40 1067 mm 2057 mm Li
BS 3733: 1974
15x9 40 572 mm 6452 mm Li
19x11 40 1057 mm 3937 mm Li
Application: 21x9 40 991 mm 1930 mm Li
Variable speed pulley drives 22x16 40 1727 mm 6553 mm Li
requiring exact speed control 30x12 30 1626 mm 6604 mm Li
and maximum range of speed 40x20 30 1727 mm 6579 mm Li
changes, recreational 55x22 30 1829 mm 6579 mm Li
equipment, machine tools, 60x25 30 1854 mm 6579 mm Li
etc. 68x24 32 2438 mm 9042 mm Li

Features:
• Excellent transverse rigidity and longitudinal flexibility to prevent bucking at
minimum diameter settings, where Belt stress is more
• Firm gripping action with the contact area; provides positive traction for precise speed
control
• Higher power transmission capacity
• Longer service life
• Facilitates smooth running without excessive vibrations
• Temperature range: -18°C to +80°C
• Aramid cord construction Belts are available upon request

5
WRAPPED BELTS
Special-construction Wrap Belts
PIX-ECHELON®-XS (PT-O)
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PTO-A(13x13) 13.0 13.0 5.0 40 48" 356" Li
PTO-B(17x14) 17.0 14.0 3.0 40 85" 923" Li
Application: PTO-B(17x16) 17.0 16.0 5.0 40 85" 923" Li
Food-grain, ceramic industry PTO-C 22.0 17.0 3.0 40 149" 923" Li
PTO-37 x 25 37.0 25.0 5.0 40 161" 900" Li
Note: Belts with customised top-profile thickness, can be made available upon request
PIX-TEXTURA®-XS (PT-HC)
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PTHC-B(17x17) 17.0 17.0 6.0 40 16" 926" Li
PTHC-C(22x20) 22.0 20.0 6.0 40 31" 927" Li
Application:
Ceramic and food industry

PIX-CERAMICA®-XS (PT-6)
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PT6-B(17x22) 17.0 22.0 11.0 40 42" 357" Li
Application: PT6-B(17x26) 17.0 26.0 15.0 40 42" 357" Li
Ceramic industry PT6-C(22x25) 22.0 25.0 11.0 40 73" 923" Li

PIX-X’press®-XS
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PTX-20x12.5 20.0 15.0 2.5 40 48" 929" Li
Application:
Ceramic industry

PIX-EXTRACTOR®-XS (PT-7)
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PT7-D(32x26) 32.0 26.0 7.0 40 142" 924" Li
Application: PT7-37(37x25) 37.0 25.0 7.0 40 116" 371" Li
Carrot harvesters,
horticultural machines, etc.

PIX-PTU
Top Top profile Mfg. Range
Width Thickness Angle Length
Section (mm) Thickness (Degree) Desig.
(mm) (mm) Min. Max.
PTU-B 17.0 16.5 5.5 40 Up to 36.5” Li

Application:
Medical wheel-chairs

Features:
• Application-specific, robust Belt design
• Longer service-life
• High tensile strength with minimum elongation
• Excellent adhesion strength to eliminate top profile separation
• Designed for applications where power transmission and conveying of material is done simultaneously
• Temperature range: -18°C to +80°C
• Reference standard: PIX proprietary

6
WRAPPED BELTS
LawnMaster® Lawn Mower Wrap Belts
Top Mfg. Range
Thickness Angle Length
Section Width Designation
(mm) (mm) (Degree)
Min. Max.
DCBU-3L 9.7 5.6 40 17" 173.5" La
DCBU-4L 12.7 7.9 40 18" 359" La
DCBU-5L 16.7 9.7 40 21" 199" La

Reference Standard: Features:

• RMA IP-23 • Aramid cords offer high tensile strength, high resistance to shock loads and minimum
elongation
• Specially designed bare fabric, facilitates smooth clutching operation and high
Application:
resistance to wear and tear
Lawn and garden machinery
• Able to withstand high levels of reverse flexing
• Resistance to oil, heat and cracking
• Temperature range: -18°C to +80°C
• Intermediate sizes and OEM parts are available upon request

ENFORCER®-XS High-power, High-strength, Inversely Flexible Wrap Belts

Top Mfg. Range
Thickness Length
Section Width Designation
(mm) (mm)
Min. Max.
RH80-A 13.0 8.0 46” 185” Lp
RH80-B 17.0 10.0 46” 156” Lp
RH80-C 22.0 11.0 46” 176” Lp

Reference Standard: Features:

• PIX proprietary • Superior power transmission capacity as compared to standard Belts
• Specially treated outer cover fabric for high wear resistance
• Specially coated aramid cords for superior strength and offers minimum elongation
Application:
• Unique design in wrap construction to facilitate operation over smaller pulley
Rice harvesters, planters, lawn
and garden machinery, etc. diameters with acute reverse bends
• Suitable for shock-load drives
• Longer service life
• Extended temperature range: -25°C to + 100°C
• Intermediate sizes are available upon request

VALIANT®-XS High-power, Inversely Flexible Wrap Belts

Top Mfg. Range
Thickness Length
Section Width Designation
(mm) (mm)
Min. Max.
RHR2-A 13.0 8.0 46” 185” Lp
RHR2-B 17.0 10.0 46” 156” Lp
RHR2-C 22.0 11.0 46” 176” Lp
Reference Standard:
• PIX proprietary Features:
• High power transmission capacity as compared to standard Belts
• High tensile strength
Application: • Special design in wrap construction to facilitate operation over smaller diameter
Rice harvesters, planters, lawn pulleys with acute reverse bend
and garden machinery, etc. • Extended service-life
• Extended temperature range: -25°C to + 100°C
• Intermediate sizes are available upon request

7
WRAPPEDAgricultural
BELTS Wrap Belts
HARVESTER -VS
®

Top Width Thickness Angle Mfg. Range (mm) Length

Section (mm) (mm) (Degree) Desig.
Min. Max.
AG-HI 25.0 13.0 30 1162 6534 Le
AG-HJ 32.0 15.0 30 1225 8273 Le
AG-HK 38.0 18.0 30 1535 9205 Le
AG-HL 45.0 20.0 30 1650 6705 Le
AG-HM 51.0 22.0 30 1935 10132 Le
Reference Standards:
• ISO 3410:1989 /
Non-standard sizes
BS 3733: 1974
AG-13x11 13.0 11.0 40 1065 2057 Li
• ASAE 211-3 & 4
AG-15x9 15.0 9.0 40 571 6451 Li
AG-19x11 19.0 11.0 40 1056 3937 Li
Application: AG-21x9 21.0 9.0 40 990 1930 Li
Combine harvesters, straw AG-22x11 22.0 11.0 40 1067 8992 Li
walker drives, threshing drives, AG-22x16 22.0 16.0 40 1727 6553 Li
agriculture tillers, rippers, AG-30x12 30.0 12.0 30 1626 6604 Li
etc. AG-40x20 40.0 20.0 30 1727 6579 Li
AG-55x22 55.0 22.0 30 1829 6579 Li
AG-60x25 60.0 25.0 30 1854 6579 Li
AG-68x24 68.0 24.0 32 2438 9042 Li

Features:
• Highly flexible, suitable for smaller diameter pulleys
• High power transmission than standard Belts
• High tensile strength
• Excellent performance under variable load conditions
• Temperature range: -18°C to +80°C
• Aramid cord construction Belts are available upon request

HARVESTER®-AGF Agricultural Flat Belts

Top Width Thickness Mfg. Range (mm) Length
Section (mm) (mm) Designation
Min. Max.
75F 75.0 6.0 2692 8941 Li
80F 80.0 6.0 1956 6452 Li
95F 95.0 6.0 2692 8001 Li
100F 100.0 6.0 2159 8052 Li
114F 114.0 6.0 2692 8052 Li
Reference Standard: 120F 120.0 6.0 2692 8052 Li
• PIX proprietary 125F 125.0 6.0 1727 6401 Li
127F 127.0 6.0 2692 8052 Li
135F 135.0 6.0 2692 8052 Li
Application: 140F 140.0 6.0 2692 8052 Li
Combine harvesters, paper 150F 150.0 6.0 2692 8052 Li
industry, etc.
Features:
• High abrasion resistant outer cover
• High tensile strength with minimum elongation
• Suitable for harvester traction drives
• Temperature range: -18°C to +80°C
• Intermediate sizes are available upon request

8
RAW EDGE COGGED BELTS
X’tra® Moulded Raw Edge Cogged Belts
CLASSICAL SECTION BELTS
Top Min. Mfg.Range Belt Length Factor
Width Thickness Angle Pulley Dia.
Length
Section (mm) (Degree) Lp to La Li to Lp Desig.
(mm) (mm) Li to La
Min. Max. (mm) (mm) (mm)
ZX 10.0 6.0 36 40.0 21.5" 200" 16 22 38 Li
AX 13.0 8.0 36 63.0 21.5" 200" 14 36 50 Li
BX 17.0 11.0 36 90.0 21.5" 200" 26 43 69 Li
Reference Standards: CX 22.0 14.0 36 140.0 23.5” 200" 32 56 88 Li
• IS 2494, BS 3790, ISO 4184 DX 32.0 19.0 38 280.0 40.0” 200” 40 79 119 Li
• RMA IP 22
WEDGE SECTION BELTS
• RMA IP 23 XPZ 10.0 8.0 36 56.0 550mm 5000mm 13 37 50 Lp
XPA 13.0 10.0 36 71.0 550mm 5000mm 18 45 63 Lp
Application: XPB 16.3 14.0 36 112.0 550mm 5000mm 28 60 88 Lp
Compressors, pumps, fans, XPC 22.0 18.0 38 180.0 600mm 6300mm 30 83 113 Lp
vacuum pumps, blowers,
generators, heat exchanger,
NARROW SECTION BELTS
3VX 9.7 8.0 38 56.0 21.5" 200" 13 37 50 La
industrial drives, etc. 5VX 15.8 13.5 38 112.0 21.5" 200" 25 60 85 La
8VX 25.4 23.0 38 254.0 90" 200” 53 92 145 La
LIGHT DUTY SINGLE V-BELTS
2LX 6.3 4.0 36 25.0 21.5" 200" - - - La
3LX 9.7 5.6 36 36.0 21.5" 200" 16 22 38 La
4LX 12.7 7.9 36 58.0 21.5" 200" 14 36 50 La
5LX 16.7 9.7 36 72.0 21.5" 200” 26 43 69 La

Features:
• Higher power transmission capacity than Wrapped Belts
• Special cog design for enhanced flexibility and heat dissipation rate
• Suitable for drives using smaller diameter pulleys and high RPM
• Anti-static, oil and heat resistant
• Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec,
Narrow: up to 45 m/Sec)
• Temperature range: -25°C to +100°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

MUSCLE®-XR3 High-power, Maintenance-free, Moulded Raw Edge Cogged Belts

Top Mfg. Range
Thickness Angle Length
Section Width Designation
(mm) (mm) (Degree)
Min. Max.
MF3-XPZ 10.0 8.0 36 550mm 5000mm Lp
MF3-XPA 13.0 10.0 36 550mm 5000mm Lp
MF3-XPB 16.3 14.0 36 550mm 5000mm Lp
MF3-XPC 22.0 18.0 38 600mm 5000mm Lp
MF3-3VX 9.7 8.0 38 21.5" 200" La
Reference Standards: MF3-5VX 15.8 13.5 38 21.5" 200" La
• BS 3790, ISO 4184
• RMA IP-22 Features:
• Exceptionally high power rating - up to 50% more than standard Belts
Application: • Special cog design facilitates enhanced flexibility and quicker heat dissipation
High temperature industrial • High transmission efficiency up to 98%, providing optimum output
drives, compressors, blowers, • Maintenance-free property, less machine downtime and extended service life
high power presses, hot rolling • Complies with ISO 1813 - for anti-static property
mills, textile machinery, ID fan, • Space saving potential
FD fans, excavators, pumps,
• REACH and RoHS compliant, provides an eco-friendly system
generators, pulverisers, etc.
• Smooth operation with a minimum tension-drop
• Temperature range from -35°C to +130°C

9
RAW EDGE COGGED BELTS
MUSCLE®-XR4 High-power, Maintenance-free, Moulded Raw Edge Cogged Belts
Top Min. Mfg. Range
Thickness Angle Length
Section Width Pulley Dia. Designation
(mm) (mm) (Degree) (mm) Min. Max.
MF4-XPZ 10.0 8.0 36 56 700 mm 5000 mm Lp
MF4-XPA 13.0 10.0 36 71 700 mm 5000 mm Lp
MF4-XPB 16.3 14.0 36 112 700 mm 5000 mm Lp
MF4-XPC 22.0 18.0 38 180 700 mm 5000 mm Lp
MF4-3VX 9.7 8.0 38 56 27.5” 200” La
Reference Standards: MF4-5VX 15.8 13.5 38 112 27.5” 200” La
• BS 3790, ISO 4184
• RMA IP-22 Features:
• Superior service life ensuring higher returns on investment
Application: • Extended temperature range from -50°C to +130°C for optimal performance in diverse
High temperature industrial applications
drives, compressors, blowers, • Maintenance-free performance, resulting in minimal service costs
high power presses, hot rolling • Exceptionally high power rating over standard Belts
mills, textile machinery, ID fan, • Special Belt surface design for superior flexibility and abrasion resistance
FD fans, excavators, pumps, • High transmission efficiency up to 98%, resulting in enhanced productivity and reduced
generators, pulverisers, etc. cost of ownership
• Special cog design for enhanced flexibility and rapid heat dissipation
• Complies with ISO 1813 for anti-static properties for enhanced operational safety
• Space saving potential, allows compactness in the drive
• REACH and RoHS compliant, enabling a sustainable ecosystem

DUO®-XV Double-cog, Variable-speed, Moulded Raw Edge Cogged Belts

Top Width Thickness Angle Mfg. Range "L"
"TW" Length
Section "TH" "A" Desig.
(mm) (mm) (Degree) Min. Max.
XX-TW TH A L 13.0 - 85.0 10.0 to 30.0 22 to 40 25.0" 200" Li

Features:
• Double-sided cog profile offers enhanced flexibility and higher heat dissipation rate
Reference Standard: • Excellent dimensional stability
• PIX proprietary
• High lateral rigidity
• Designed specially to perform smoothly over smaller diameter pulleys
Application:
• Temperature range: -25°C to +100°C
Textile machinery, milling
machines, ring frames, etc.

DUO®-XR Double-cog, Hexagonal Moulded Raw Edge Cogged Belts

Top Min. Pulley Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Diameter Desig.
(mm) (mm) Min. Max.
AAX 13.0 10.0 36 60.0 31.5" 118.0" Le
BBX 17.0 14.0 36 85.0 31.5" 200.0" Le
CCX 22.0 17.0 36 130.0 39.5" 118.0" Le

Features:
Reference Standard:
• IS 11038-1984 • Highly flexible, suitable for small diameter pulleys
• High heat dissipation rate
Application: • Power transmission from both sides of the Belt
Husker machines, rice mills, • Enhanced power rating compared to the standard hexagonal Belts
serpentine drives, textile units, • Suitable for serpentine drives
etc. • Anti-static, oil and heat resistant
• Temperature range: -25°C to +100°C

10
RAW EDGE COGGED BELTS
FRAS®-XR Fire-resistant, Anti-static, Moulded Raw Edge Cogged Belts
Belt Type Sections

Classical FRAS-ZX, FRAS-AX, FRAS-BX, FRAS-CX

Wedge FRAS-XPZ, FRAS-XPA, FRAS-XPB, FRAS-XPC
Narrow FRAS-3VX, FRAS-5VX, FRAS-8VX
Features:
Reference Standards:
• Ensures high level of protection against fire hazards
• ATEX Certified
• IS 2494 Part-II ATEX
Certified
• Fire resistance properties complies as per IS 2494 Part-II standard
• ISO 1813 • Anti-static values found 10 to 15 times superior than the maximum specified value,
• BS 3790, ISO 4184 as per ISO 1813
• RMA IP-22 • ATEX certified
• Resistance to emit inflammable substances, while in operation
Application: • Enhanced heat dissipation rate
Petrochemical industries,
• Superior performance over smaller diameter pulleys
coal mines, fire-prone areas,
gas stations, applications • Longer service-life
involving inflammable • Temperature range: -25°C to +100°C
substances, etc.

X’tra®-XP CLASSICAL SECTION BELTS

Top Min. Mfg. Range Belt Length Factor
Angle Length
Section Width Thickness (Degree) Pulley Dia.
(mm) (mm) (mm) Lp to La Li to Lp Li to La Desig.
Min. Max. (mm) (mm) (mm)
XP-ZX/XL-ZX 10.0 6.0 36 40.0 21.5" 200" 16 22 38 Li
XP-AX/XL-AX 13.0 8.0 36 63.0 21.5" 200" 14 36 50 Li
XP-BX/XL-BX 17.0 11.0 36 90.0 21.5" 200" 26 43 69 Li
XP-CX/XL-CX 22.0 14.0 36 140.0 23.5" 200" 32 56 88 Li
Raw-Edge-Plain Belts
XP-DX/XL-DX 32.0 19.0 38 280.0 40.0" 200" 40 79 119 Li

X’tra®-XL WEDGE SECTION BELTS

Raw-Edge-Laminated Belts XP-XPZ/XL-XPZ 10.0 8.0 36 56.0 550mm 5000mm 13 37 50 Lp
XP-XPA/XL-XPA 13.0 10.0 36 71.0 550mm 5000mm 18 45 63 Lp
XP-XPB/XL-XPB 16.3 14.0 36 112.0 550mm 5000mm 28 60 88 Lp
XP-XPC/XL-XPC 22.0 18.0 38 180.0 600mm 6300mm 30 83 113 Lp

NARROW SECTION BELTS

XP-3VX/XL-3VX 9.7 8.0 38 56.0 21.5" 200" 13 37 50 La
XP-5VX/XL-5VX 15.8 14.0 38 112.0 21.5" 200" 25 60 85 La
Reference Standards: XP-8VX/XL-8VX 25.4 23.0 38 254.0 90" 200" 53 92 145 La
• IS 2494, BS 3790, ISO 4184
• RMA IP-22 LIGHT DUTY SINGLE V-BELTS
XP-2LX/XL-2LX 6.3 4.0 36 25.0 21.5" 200" - - - La
• RMA IP-23
XP-3LX/XL-3LX 9.7 5.6 36 36.0 21.5" 200" 16 22 38 La
XP-4LX/XL-4LX 12.7 7.9 36 58.0 21.5" 200" 14 36 50 La
Application: XP-5LX/XL-5LX 16.7 9.7 36 72.0 21.5” 200” 26 43 69 La
Industrial equipment,
agricultural machinery, Features:
lawnmowers, engine drives, • High power transmission capacity than Wrap Belts
etc.
• Superior transverse stiffness and high wear resistant
• Multilayer fabric eliminates bottom-crack
• Anti-static, oil and heat resistant
• Suitable for applications with back idlers
• Temperature range: -25°C to +100°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

11
RAW EDGE COGGED BELTS
Spectra®-XR Centre-corded, Extremely Flexible, Raw Edge Laminated Belts
Top Mfg. Range
Width Thickness
Section (mm)
(mm) Min. Max.
CC-AX 12.7 8.5 24" 200"
CC-BX 15.5 11.0 24" 200"
CC-CX 22.0 14.0 51" 200"

Features:
Reference Standard: • High power rating compared to standard Wrap Belts
• BS 3790 • High tensile strength
• Improved flexibility and best suited for back idler applications
Application:
Used in multiple applications, • Superior Belt life
where drive demands for high • Temperature range: - 25°C to +100°C
power and reverse bending • Intermediate sizes are available upon request
properties

DuraBand®-XR Banded, Moulded Raw Edge Cogged Belts

Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
HAX 13.0 10.0 36 15.9 23.5" 200" Li
HBX 17.0 13.0 40 19.0 23.5" 200" Li
HCX 22.0 16.0 36 25.5 23.5" 200" Li
HXPZ 10.0 10.0 36 12.0 600mm 5000mm Lp
HXPA 13.0 12.0 36 15.0 600mm 5000mm Lp
Reference Standards: HXPB 16.3 16.0 40 19.0 600mm 5000mm Lp
• ISO 5290, BS 3790 HXPC 22.0 20.0 36 25.5 600mm 5000mm Lp
• RMA IP 22 H3VX 9.7 10.0 40 10.3 23.5" 200" La
H5VX 15.8 16.0 38 17.5 23.5" 200" La
Application:
Compressors, generators, Features:
blowers, hot rolling mills, • Extended power transmission capacity up to 25% as compared to standard single Belts
agitators, industrial fans, • Lesser number of Belts is required, compared to multiple single-Belt drive
separators, etc. • Unique cog profile enhances the flexibility and heat dissipation rate
• Extended service-life
• Anti-static, oil and heat resistant
• Temperature range: -25°C to +100°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

12
RAW EDGE COGGED BELTS
MUSCLE®-HXR3 High-power, Maintenance-free, Banded Moulded Raw Edge
Cogged Belts
Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
MF3-HXPZ 10.0 10.0 36 12.0 600mm 5000mm Lp
MF3-HXPA 13.0 12.0 36 15.0 600mm 5000mm Lp
MF3-HXPB 16.3 16.0 36 19.0 600mm 5000mm Lp
MF3-HXPC 22.0 20.0 36 25.5 600mm 5000mm Lp
MF3-H3VX 9.7 10.0 36 10.3 23.5" 200" La
Reference Standards: MF3-H5VX 15.8 16.0 36 17.5 23.5" 200" La
• ISO 5290, ISO 5291, BS 3790
• RMA IP-22 Features:
• Superior power transmission capacity up to 60% more than standard single Belts
Application: • Special cog design facilitates enhanced flexibility and quicker heat dissipation
High temperature industrial • High transmission efficiency up to 98%, providing optimum output
drives, compressors, blowers, • Maintenance-free property, less machine downtime and extended service life
high power presses, hot rolling • Complies with ISO 1813 - for anti-static property
mills, textile machinery, ID fan, • Space saving potential
FD fans, excavators, pumps, • REACH & RoHS compliant, provides an eco-friendly system
generators, pulverisers, etc.
• Smooth operation with a minimum tension-drop
• Temperature range from -35°C to +130°C
• Belts are available in Muscle-HXR4 construction as well

X’tra®-XV Variable-speed, Moulded Raw Edge Cogged Belts

Top Mfg. Range (mm) Belt Length Factor
Width Thickness Angle
Section (mm) (Degree) Lp to La Li to Lp Li to La
(mm) Min. Max. (mm) (mm) (mm)
22V-A22/1422V 22.0 8.0 22 550.0 5000.0 15.0 35.0 50
30V-A22/1922V 30.0 10.0 22 550.0 5000.0 20.0 42.0 62
37V-A22/2322V 37.0 11.0 22 550.0 5000.0 23.0 46.0 69
30V-A26/1926V 30.0 11.0 26 550.0 5000.0 23.0 46.0 69
46V-A26/2926V 46.0 13.0 26 550.0 5000.0 27.0 55.0 82
Reference Standards: 51V-A26/3226V 51.0 13.0 26 550.0 5000.0 27.0 55.0 82
• RMA IP-25/1991 40V-A30/2530V 40.0 15.0 30 635.0 5000.0 30.0 65.0 95
• ISO 3410:1989 (E) / 51V-A30/3230V 51.0 16.0 30 635.0 5000.0 33.0 67.0 100
ASAE S211-4 70V-A30/4430V 70.0 18.0 30 635.0 5000.0 37.0 77.0 114
64V-A36/4036V 64.0 18.0 36 635.0 5000.0 37.0 77.0 114
Application: 70V-A36/4436V 70.0 18.0 36 635.0 5000.0 37.0 77.0 114
Variable speed pulley drives 76V-A36/4836V 76.0 19.0 36 635.0 5000.0 39.0 81.0 120
requiring exact speed control
and maximum range of speed (Reference Standards: ISO 3410:1989 (E) / ASAE S211-4)
changes, recreational XHG 17.0 8.0 26 550.0 5000.0 15.0 35.0 50.0
equipment, machine tools, XHH 20.0 10.0 26 550.0 5000.0 20.0 42.0 62.0
etc. XHI 25.0 13.0 26 550.0 5000.0 27.0 55.0 82.0
XHJ 32.0 15.0 26 750.0 5000.0 30.0 65.0 95.0
XHK 38.0 18.0 26 750.0 5000.0 37.0 77.0 114.0
XHL 45.0 20.0 26 750.0 5000.0 40.0 82.0 122.0
XHM 51.0 22.0 26 750.0 5000.0 45.0 90.0 135.0
XHN 57.0 24.0 26 750.0 5000.0 50.0 100.0 150.0
XHO 64.0 25.0 26 750.0 5000.0 53.0 106.0 159.0

Non-standard Sections
Special 6 to 85 5 to 30 22 to 40 21.5” Li 200” Li Variable Variable Variable

Features:
• Excellent transverse rigidity and longitudinal flexibility to prevent bucking over
minimum diameter pulleys
• Superior grip to avoid slippage while operating under frequent speed variations
• Longer service-life
• Facilitates smooth running without excessive vibrations
• Temperature range: -25°C to +100°C
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

13
RAW EDGE COGGED BELTS
HARVESTER®-XV Agricultural Moulded Raw Edge Cogged Belts
Top Mfg. Range (mm) Belt Length Factor
Width Thickness Angle
Section (mm) (Degree) Lp to La Li to Lp Li to La
(mm) Min. Max. (mm) (mm) (mm)
AG-XHG 17.0 8.0 26 550.0 5000.0 15.0 35.0 50.0
AG-XHH 20.0 10.0 26 550.0 5000.0 20.0 42.0 62.0
AG-XHI 25.0 13.0 26 550.0 5000.0 27.0 55.0 82.0
AG-XHJ 32.0 15.0 26 750.0 5000.0 30.0 65.0 95.0
AG-XHK 38.0 18.0 26 750.0 5000.0 37.0 77.0 114.0
Reference Standards: AG-XHL 45.0 20.0 26 750.0 5000.0 40.0 82.0 122.0
• ISO 3410:1989 (E) / AG-XHM 51.0 22.0 26 750.0 5000.0 45.0 90.0 135.0
ASAE S211-4 AG-XHN 57.0 24.0 26 750.0 5000.0 50.0 100.0 150.0
AG-XHO 64.0 25.0 26 750.0 5000.0 53.0 106.0 159.0

Application: Features:
Combine harvesters, straw
• Specially designed for applications using smaller diameter pulleys
walker drives, threshing drives,
agriculture tillers, rippers, • Highly flexible and accelerated heat dissipation rate
etc. • Excellent performance under variable load conditions
• Temperature range: -25°C to +100°C
• Special double-sided, cog variator Belts are available upon request
• Intermediate sizes are available upon request
• Aramid cord construction Belts are available upon request

DOMINATOR®-XR High-power, High-strength, Moulded Raw Edge Cogged Belts

Top Mfg. Range
Thickness Length
Section Width Designation
(mm) (mm)
Min. Max.
RH10-BX 17.0 10.0 22” 85” Lp
RH10-CX 22.0 11.0 22” 85” Lp

Features:
Reference Standard: • Superior high power transmission capacity
• PIX proprietary • Aramid cord reinforcement for high tensile strength
Application:
• Lower elongation and slippage
Rice harvesters • Excellent performance under heavy shock load conditions
• Superior lateral rigidity and longitudinal flexibility
• Suitable for drives with small pulley diameters
• Suitable for heavy duty, high speed applications
• Anti-static, oil and heat resistant
• Temperature range: -25°C to + 100°C

14
RIBBED / POLY-V BELTS
X’ceed® Ribbed / Poly-V Belts
Thickness Rib Pitch Min. Pulley No. of Length
Section (mm) Diameter possible Manufacturing Range Desig.
(mm)
(mm) Ribs
PH 2.9 1.60 13.0 2 to 330 280mm to 2600mm Le
PJ 3.8 2.34 20.0 2 to 235 280mm to 5000mm Le
PK 4.5 3.56 45.0 2 to 150 280mm to 5000mm Le
2 to 110 500mm to 5000mm
PL 7.6 4.70 75.0 Le
2 to 45 > 5001mm to 12000mm
Reference standards: 2 to 52 950mm to 5000mm
• RMA IP-26, ISO 9982 PM 13.3 9.40 180.0 Le
2 to 20 > 5001mm to 12000mm
• DIN 7867
Features:
Application: • High power transmission capacity
Crude oil pumps, spreaders, • Suitable for small pulley diameters
seeding machines, vegetable
crushers, household • Maximum Belt linear speed up to 60 m/Sec
appliances, washing machines, • Highly flexible, noise-free and smooth running
dryers, machine tools, • Suitable for speed ratios up to 1:30
grinders, etc. • Anti-static oil and heat resistant
• Temperature range: -25°C to +100°C

DUO®-XC Double-sided Poly-V Belts

PIX-DUO®-XC:
DPK: 2 to 13 ribs, DPL: 2 to 28 ribs

Manufacturing range:
DPK Section: 1195 mm to 3255 mm
DPL Section: 1195 mm to 3070 mm
Reference standards: Features:
• RMA IP-26
• ISO 9982
• Highly flexible and reduced bending stress
• Suitable for smaller pulley diameters
Application: • Optimum performance even over higher speed
Flour mills, serpentine drives, • Suitable for the drives with pulleys rotating in clockwise and anti-clockwise directions
textile machinery, engines, • Twin contact surface area, power transmission through both sides of the Belt
industrial compressors, • Temperature range: -25°C to +100°C
gardening equipment, etc.

FRAS®-XC Fire-resistant, Anti-static, Poly-V Belts

Belt Type Sections

Poly-V FRAS-PJ
Poly-V FRAS-PK
Poly-V FRAS-PL
Poly-V FRAS-PM
Reference standards:
Features:
• ATEX Certified
• IS 2494 Part-II ATEX
Certified
• Ensures high level of protection against fire hazards
• ISO 1813 • Fire resistant and anti-static properties as per ISO 1813
• RMA IP-26, ISO 9982 • ATEX certified
• DIN 7867 • Suitable for high speed serpentine drives using smaller diameter pulleys
• Temperature range: -25°C to +100°C
Application:
Petrochemical industries,
coal mines, fire-prone areas,
gas stations, applications
involving inflammable
substances, etc.

15
RIBBED / POLY-V BELTS
THERMAL®-XC High-temperature Poly-V Belts
Belt Type Sections

Poly-V HT-PJ
Poly-V HT-PK
Poly-V HT-PL

Reference standards: Features:

• RMA IP-26 • High power transmission capacity
• ISO 9982, DIN 7867 • Suitable for small pulley diameters
• Maximum Belt linear speed up to 60 m/Sec
Application:
• Extended service-life
Lawn mowers, dryers, wet
grinders, washing machines, • High temperature resistant from: -35°C to +130°C
generators, etc.

PolyStretch®-XC Elasticated Poly-V Belts

Thickness Rib Pitch No. of Manufacturing Length
Section (mm) (mm) possible Range Desig.
Ribs
M-PS-PJ (Moulded) 3.3 2.34 2 to 210 300mm to 2500mm Le
PS-PJ 3.5 2.34 2 to 220 300mm to 1400mm Le
M-PS-PH (Moulded) 2.9 1.60 2 to 305 300mm to 2500mm Le

Reference standards: Features:

• RMA IP-26 • Low noise levels
• ISO 9982 • Self-tensioning property, maintains the Belt tension throughout its service-life
• Enhanced power transmission because of optimum contact area
Application:
• Easy installation
Washing machines, dryers,
fitness equipment, etc. • Increased service-life
• Moulded Belts offer superior dimensional stability
• Temperature range: -25° to +100°C
• Moulded Belt-range is exhaustive. Specific Belt length can be manufactured, based upon the availability of mould

TopCoat®-XC Packaging Machinery Poly-V Belts

Top Coat Mfg. Range
Belt No. of Thickness
Section Possible Ribs (mm) Min. Max.
TCP-PJ 6 to 220 4,6,8 & 10 700 mm 2000 mm
TCP-PK 5 to 144 4,6,8 & 10 700 mm 2000 mm
TCP-PL 4 to 109 4,6,8 &10 700 mm 3700 mm

Features:
Reference standard:
• RMA IP-26, ISO 9982 • Construction comprises of application-specific, profile-top rubber
• Facilitates excellent cushioning coupled with extra elasticity, with the contact material
Application: • Excellent flexibility to prevent, premature cracks or tearing
Cable & plastic tube extruders, • Optimum friction, suitable for providing proper support to the contact material
bottling plants, etc. • Vulcanized as a single piece to ensure excellent adhesion
• Abrasion resistant
• Longer service-life
• Temperature range: -25°C to +70°C
• It is recommended that the Belt selection should strictly be done on the basis of temperature, top coat hardness
and application requirement
• Also available with 65 shore hardness (Black colour)

16
TIMING / SYNCHRONOUS BELTS
X’act® Timing / Synchronous Belts
PIX-X’act® CT (CLASSICAL SECTION BELTS)
Tooth Belt Mfg. Range Sleeve Length
Pitch Width
Section (mm) Height Thickness Desig.
(mm) (mm) Min. Max. (mm)
MXL 2.032 0.51 1.14 2.1" 177.1" 450 Lp
XXL 3.175 0.76 1.52 5.0" 21.90" 450 Lp
XL 5.080 1.27 2.30 4.4" 212.8" 465 Lp
L 9.525 1.91 3.60 6.7" 270.0" 465 Lp
Reference standards: H 12.700 2.29 4.30 14.5" 272.0" 465 Lp
• ISO 13050 XH 22.225 6.35 11.20 46.3" 227.5" 430 Lp
• ISO 5294, ISO 5296 XXH 31.750 9.53 15.70 62.5" 200.0" 430 Lp

Application: PIX-X’act® STD (SUPER TORQUE DRIVE BELTS)

Robotic machines, textile S 2M 2.00 0.76 1.36 60mm 3700mm 450 Lp
machinery, CNC machines, S 3M 3.00 1.14 2.20 120mm 6510mm 450 Lp
printers, scanners, currency S 5M 5.00 1.91 3.40 150mm 4000mm 465 Lp
counting machines, etc. S 8M 8.00 3.05 5.30 376mm 6640mm 460 Lp
S 14M 14.00 5.30 10.20 714mm 5012mm 440 Lp

PIX-X’act® HTD (HIGH TORQUE DRIVE BELTS)

2M 2.00 0.75 1.36 52mm 750mm 450 Lp
3M 3.00 1.17 2.40 60mm 6804mm 450 Lp
5M 5.00 2.06 3.80 180mm 3750mm 465 Lp
8M 8.00 3.48 6.00 184mm 6880mm 460 Lp
14M 14.00 6.02 10.00 812mm 8120mm 420 Lp

Features:
• High efficiency due to positive engagement between the Belt teeth and pulley grooves
• Fiber glass cords provide excellent strength, flex life and high resistance to elongation
• Exact power transmission
• Improved stress distribution
• Temperature range: -25°C to +100°C
• These sizes are indicative, denotes the minimum and maximum range. Intermediate sizes are available upon request

TorquePlus®-XT2 High-power, Timing Belts

Tooth Belt Mfg. Range Sleeve Length
Pitch Height Thickness Width
Section (mm) Desig.
(mm) (mm) Min. Max. (mm)
TP2-5M 5.0 2.06 3.8 300mm 2250mm 465 Lp
TP2-8M 8.0 3.48 6.0 344mm 4464mm 460 Lp
TP2-14M 14.0 6.02 10.0 966mm 4578mm 420 Lp
TP2-S5M 5.0 1.91 3.4 350mm 2525mm 460 Lp
TP2-S8M 8.0 3.05 5.3 376mm 3200mm 460 Lp
Reference standard:
• ISO 13050
Features:
Application: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts
Food processing machines, • Higher angular speed, resistance to loads and low noise
paper & packaging machines, • Optimum operational efficiency and augmented Belt life
printing machines, robotic • Lower operational cost
equipment, conveyors, • Anti-static properties as per ISO 9563
office equipment, medical • Oil and heat resistance
equipment, dough mixers,
• Temperature range -25°C to +100°C
textile machines, etc.

17
TIMING / SYNCHRONOUS BELTS
Thermal®-XT2 High-power, EPDM Timing Belts
Tooth Belt Mfg. Range Sleeve Length
Pitch Height Thickness Width
Section (mm) Desig.
(mm) (mm) Min. Max. (mm)
HT-TP2-5M 5.00 2.06 3.80 300mm 2250mm 460 Lp
HT-TP2-8M 8.00 3.48 6.00 344mm 4464mm 460 Lp
HT-TP2-14M 14.00 6.02 10.00 966mm 4578mm 420 Lp
HT-TP2-S5M 5.00 1.91 3.40 350mm 2525mm 460 Lp
Reference standard: HT-TP2-S8M 8.00 3.05 5.30 376mm 3200mm 460 Lp
• ISO 13050
Features:
Application: • Superior power transmission over PIX-TorquePlus®-XT2 Belts
Food processing machines,
• Higher angular speed, resistance to loads and low noise
paper & packaging machines,
printing machines, robotic • Optimum operational efficiency and augmented Belt life
equipment, conveyors, • Lower operational cost
office equipment, medical • Anti-static properties as per ISO 9563
equipment, dough mixers, • Ozone resistance
textile machines, etc.
• Temperature range -35°C to 130°C
• Belts are having limitations with respect to oil resistance. Not to be used where drive is exposed to oil contamination

Duo®-XT Double-sided Timing Belts

Tooth Belt Mfg. Range Length
Pitch Height Thickness
Section (mm) Designation
(mm) (mm) Min. Max.
DA-XL 5.080 1.27 3.05 20.0" 58.0" Lp
DA-L 9.525 1.91 4.58 18.7" 66.0" Lp
DA-H 12.700 2.29 5.96 20.0" 272.0" Lp
DA-3M 3.000 1.17 3.10 501mm 1401mm Lp
DA-5M 5.000 2.06 5.26 400mm 2050mm Lp
Reference standards: DA-8M 8.000 3.48 8.17 512mm 4400mm Lp
• ISO 13050, ISO 5296 DA-14M 14.000 6.02 14.8 1400mm 6860mm Lp
DA-S5M 5.000 1.91 5.00 410mm 1420mm Lp
Application: DA-S8M 8.000 3.05 7.50 512mm 6640mm Lp
Textile units, paper packaging
& printing machines, lawn & Features:
garden, hand-held power • Facilitates power transmission from both sides of the Belt
tools, food processors, office
equipment, currency counting • Highly flexible
machines, medical diagnostic • Extended stability, durability, strength and life
equipment, vending machines, • Temperature range: -25°C to +100°C
robotics, vacuum cleaners, etc.
• DA-8M and DA-S8M Belt sections are available in PIX-TorquePlus®-XT2 (High-power) construction also

Sentinel FFP®-XT2 Fin-fan Timing Belts

Pitch Length Top Width
Size (mm) (mm)
FFP-2800 14M 55 2800 55.0
FFP-3150 14M 55 3150 55.0
FFP-3360 14M 55 3360 55.0
FFP-3500 14M 55 3500 55.0
FFP-3850 14M 55 3850 55.0
Reference standard: FFP-4326 14M 55 4326 55.0
• ISO 13050 FFP-4578 14M 55 4578 55.0

Features:
Application: • High tensile strength
Air-cooled heat exchanger • Higher power transmission capacity compared to standard Belts
(Fin-Fan), etc.
• Negligible elongation to meet vertical drive requirements
• Reliable dimensional stability
• High abrasion resistance
• Anti-static properties as per ISO 9563
• Temperature range: -35°C to +130°C
• Belts can be cut to different widths as per requirement

18
TIMING / SYNCHRONOUS BELTS
TorquePlus®-XT2 Cotton-cleaner Timing Belts
Number Pitch
of Top Thickness
Size Length Width (mm)
Teeth
61CCB142 60 61” 1.5” 11.2
63CCB165 63 63” 1.5” 11.2
64CCB170 64 64” 1.5” 11.2
65CCB175 65 65” 1.5” 11.2
63CCB165-2.5 63 63” 2.5” 11.2

Reference standard: Features:

• PIX proprietary • Specially treated glass cords offer high tensile strength and superior adhesion
• Excellent fatigue resistant compound
Application: • Extended service-life
Cotton-cleaner, cotton-gin
• Oil, heat and ozone resistant
machines, etc.
• Special dimensions for specific applications

TopCoat®-XT Packaging Machinery Timing Belts

Top Coat Length
Belt Belt Thickness Top Width Range
Type Section (mm) (mm) (mm)
Standard TCT-L, H 4,6,8 18 to 450 530 to 2000
Step-cut STCT-L,H 8,10 25 to 34mm for Belt length 610 to 2000mm 610 to 2000
35 to 60mm for Belt length 1350 to 2000mm

Features:
Reference standards: • Construction comprises of profile-top-rubber, which is application-specific
• ISO 5296 • Provides excellent cushioning coupled with extra elasticity
• Excellent flexibility to withstand cracking or tearing
Application: • Offers optimum friction to support the contact material
Vertical form-fill and seal • Vulcanized as a single piece to ensure excellent adhesion
machine, packaging machines, • High abrasion resistance
soap and cosmetics industry, • Excellent life
ceramic industry, bottling
plants, etc. • Joint free, continuous top-profile
• Step-top-coat profile reduces the bending stress and offers extra flexibility
• Temperature range: -25°C to +70°C
• Top Coat Belts are also available in 5M, S5M, 8M and S8M Timing Belt sections. In the step-top-coat Belts,
the step portion is 30% to 35% of the total top-width

BRAWN®-XT Hybrid, Timing+Poly-V Belts

Timing Belt No. of Ribs Length Range
Section (mm)
PK PL
8M 6 to 126 6 to 95 1200 - 4400
S8M 6 to 126 6 to 95 1200 - 3200
14M 6 to 117 6 to 88 1200 - 4578

Features:
Reference standards:
• Combines the advantages of Timing and Poly-V Belts
• RMA/MPTA IP-26, ISO 13050 • Transverse teeth for positive engagement on one side and longitudinal ribs for non-
synchronous frictional transmission on other side
Application: • Suitable for multi-shaft transmission with reversed rotary directions of pulleys
Flour and rice mills, food-grain • Specially treated Aramid cords for high tensile strength and adhesion
machinery, etc. • Anti-static, oil and heat resistant
• Noise-free transmission
• Operating temperature range -35°C to +130°C
• Belts can be made available with aramid cord construction upon request

19
TIMING / SYNCHRONOUS BELTS
X’pedient®-XT Polyurethane Belts
Tooth Belt Manufacturing Length
Pitch Height Thickness
Section (mm) Range Designation
(mm) (mm)
T5 5.0 1.2 2.2 T5-120 to T5-1955 Lp
AT5 5.0 1.2 2.7 AT5-225 to AT5-2000 Lp
T10 10.0 2.5 4.5 T10-250 to T10-3330 Lp
AT10 10.0 2.5 4.5 AT10-250 to AT10-2350 Lp
Reference standards:
• ISO 17396, DIN 7721 Features:
• Highly flexible coupled with longitudinal toughness to ensure perfect tooth meshing
Application: • No dust generation or flaking, while in operation
Office automation equipment, • Homogeneous throughout its cross-section by virtue of thermoset moulding process
vending machines, machine • Superior wear and abrasion resistance
tools and pumps, textile • High resistance to oil and grease
machines, paper moulding
and printing machinery, • Excellent resistance to ageing, UV and ozone
medical equipment, optical • Low vibrations and reduced noise levels
instruments, food processing • Operating temperature range: -30°C to +80°C (up to +110°C for a short period)
units, packaging machinery, • These sizes are indicative and denotes the minimum and maximum range, for Intermediate sizes please get in
robotics, plotters, etc. touch with us at info@pixtrans.com. Premium polymer construction Belts are available, upon request.

AUTOMOTIVE BELTS
FORCE® Automotive, Moulded Raw Edge Cogged Belts
Top Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Designation
(mm) Min. Max.
X9.5 / AVX10 10.0 8.0 36 550mm 5000mm La
X12.5 / AVX13 13.0 10.0 36 550mm 5000mm La
X10A 10.5 8.0 36 550mm 5000mm Le
X11A 11.5 8.0 36 550mm 5000mm Le
X13A 13.5 9.0 36 550mm 5000mm Le
X15A 17.0 10.5 38 550mm 5000mm Le
Reference standards: X17A 18.5 11.0 36 550mm 5000mm Le
• BS ISO-5287, DIN 7753-3 X20A 21.5 12.5 36 550mm 5000mm Le
• SAE J 636, JASO E 107 XV10 10.5 8.0 38 550mm 5000mm Le
XV13 13.0 9.0 38 550mm 5000mm Le
XV15 17.0 10.5 36 550mm 5000mm Le
XV20 22.00 13.0 36 550mm 5000mm Le

FORCE®-HXR Automotive, EPDM, Moulded Raw Edge Cogged Banded Belts

Top Mfg. Range
Width Thickness Angle Pitch Length
Section (mm) (Degree) (mm) Desig.
(mm) Min. Max.
HAVX10 10.0 10.0 36 12.6 600mm 5000mm La
HAVX13 13.0 12.0 36 15.9 600mm 5000mm La
HXV15 17.0 11.0 36 20.0 600mm 5000mm La
HAX-AZ 13.0 10.0 36 15.9 600mm 5000mm La
HBX-AU 17.0 13.0 36 19.0 600mm 5000mm La

Reference standards: Features:

• DIN 7753-3, ISO 2790 • Best suited for next-generation, high speed engines
• JASO E 107
• Cog profile offers enhanced flexibility and superior heat dissipation rate
• Higher power transmission capacity, best suited for smaller diameter pulleys
Application:
Automotive engines, • Engineered and chemically treated, low-stretch tensile cords for conveying higher
alternators, compressors, loads, without stretch
water pumps, fans, power- • Compounded for better grip and lateral rigidity
steering pumps, etc. • Excellent resistance to oil and heat
• Suitable for HEMM (Heavy earth moving machinery) applications
• Temperature range: -45°C to +120°C

20
AUTOMOTIVE BELTS
FORCE®-XRU Dual-cog, Moulded Raw Edge Cogged, CVT Belts
Top Mfg. Range
Width Thickness Angle Length
Section (mm) (Degree) Designation
(mm) Min. Max.
XRU-AVX10 10.0 8.0 36 700mm 3000mm La
XRU-AVX13 13.0 10.0 36 700mm 3000mm La

Features:
• Highly engineered surface-cog profile improves flexibility and allows the Belt to operate
Reference standards: optimally in compact and challenging operating conditions
• DIN 7753-3, SAE J 636, • Expansive temperature range of -35°C to +130°C, allows the Belt to operate at extreme
JASO E 107 temperatures
• Enhanced heat dissipation rate facilitates superior operational life compared to
Application:
standard automotive Belts
Automotive engines,
alternators, compressors, • Dimensional stability with increased grip and lateral rigidity resulting in higher drive
water pumps, fans, efficiency
power steering pumps, etc. • Complies with ISO-1813 (Antistatic guidelines)
• REACH & RoHS compliant ensure Belts are eco-friendly while providing for improved
sustain ability

FORCE® Automotive Series Belts

Product Top Width Thickness Angle Mfg. Range Length
Code (mm) (mm) (degree) Max. Designation
Min.
RCP-2XXX 10.0 8.0 36 550mm 3000mm La
RCP-3XXX 12.5 9.0 36 550mm 3000mm Lp
RCP-5XXX 17.0 11.0 36 550mm 3000mm Lp
RCP-7XXX 22.0 13.0 36 550mm 3000mm Lp
RECPF-1XXX 10.5 8.0 38 550mm 3000mm Le
Reference standard: RECPF-6XXX 13.0 8.0 38 550mm 3000mm Le
• PIX Proprietary RECPF-8XXX 17.0 11.0 38 550mm 3000mm Le
RECPF-9XXX 22.5 13.0 38 550mm 3000mm Le
Application:
Automotive engines, Features:
alternators, compressors, • Suitable for high speed engines
water pumps, fans, power- • Cog profile offers higher flexibility and quick heat dissipation
steering pumps, etc. • Engineered and chemically treated modulus and low stretch tensile cords for higher
load and maintenance-free operation
• Offers high power transmission over smaller pulley diameters
• Special compression rubber for high lateral rigidity
• EPDM rubber for high temperature resistance -45°C to +120°C

21
AUTOMOTIVE BELTS
FORCE® Automotive, Ribbed / Poly-V Belts
Rib Pitch Minimum Mfg. Range Length
Thickness Pulley Diameter
Section (mm) (mm) Designation
(mm) Min. Max.
PK 4.5 3.56 45 280mm 5000mm Le
DPK 7.0 3.56 50 1195mm 3255mm Le

Reference standards: Features:

• ISO 9981, RMA IP 26 • Special EPDM high compression compound for enhanced dimensional stability,
• JASO E-109 minimal vibrations and reduced noise levels
Application: • Enhanced performance in extreme temperature conditions because of special thermal
Automotive engines, resistance compound, where temperature ranges from -35°C to +130°C
alternators, compressors, • Special fibre-loaded compound offers enhanced product life
water pumps, fans, power- • High power-rated Belts for improved performance over higher load and speed conditions
steering pumps, etc. • Oil and heat resistant, suitable for HEMM applications
• Superior ozone, steam, water and acid resistance to minimise early ageing and crack
formation

PolyStretch®-XC Elasticated Poly-V Belts

Thickness Rib Pitch No. of Manufacturing Length
Section (mm) (mm) possible Range Desig.
Ribs
M-PS-PK (Moulded) 4.5 3.56 2 to 140 300mm to 2500mm Le
PS-PK 4.5 3.56 2 to 20 720mm to 2500mm Le

Features:
• Low noise levels
Reference standards: • Self-tensioning property, maintains the Belt tension throughout its service-life
• RMA IP-26, ISO 9982 • Enhanced power transmission because of optimum contact area
• JASO E-109
• Easy installation
Application: • Increased service-life
Automotive engines • Moulded Belts offer superior dimensional stability
• Temperature range: -25°C to 110°C
• Moulded Belt-range is exhaustive. Specific Belt length can be manufactured, based upon the availability of mould

FORCE® Automotive, Synchronous / Timing Belts

Teeth Belt Manufacturing
Pitch Height Thickness
Section (mm) Range
(mm) (mm)
ZA 9.525 1.91 4.1 88 ZA, 104 ZA, 111 ZA
ZB 9.525 2.29 4.5 137 ZB
ZH 9.525 3.50 5.5 89 ZH, 97 ZH, 104 ZH, 106 ZH, 109 ZH, 114 ZH,
123 ZH, 129 ZH, 136 ZH, 138 ZH, 153 ZH
PR 9.525 3.31 5.5 136 PR, 144 PR
Reference standards: PRM 9.525 3.37 5.5 97 PRM, 103 PRM, 110 PRM, 122 PRM, 123 PRM,
• ISO 9010 / JASO E 105 124 PRM, 134PRM, 141 PRM
• JASO E 106, ISO 12046 PRP 9.525 3.61 5.5 177 PRP, 185 PRP
YU 8.000 3.02 5.2 101 YU, 106 YU, 107 YU, 109 YU, 115 YU
Application:
Automotive engines-exhaust Features:
& inlet valves • Highly engineered cover compound to protect the Belt from excess wear and foreign
material such as grease, oil, dust, etc.
• Advanced Belt-geometry to enable seamless performance over smaller engine pulleys
and under frequent speed-changing drive conditions
• Robust Belt construction with specially treated glass cords to ensure high tensile
strength, negligible elongation and linear operation
• Superior woven, poly-amide fabric to enhance product life and ensure noise-free
operation
• Temperature range: -25°C to +100°C and -35°C to +150°C for HSN Construction belts

22
AUTOMOTIVE BELTS
FORCE® Scooter Belts (CVT)
Top width Thickness Angle Length Range
Section 'TW' 'TH' "A" "L"
(mm) (mm) (degree) (mm)
SC-TW TH A L 10 to 30 8 to 20 30 600 to 1500

Features:
Reference Standard: • Specially treated top-fabric for increased flexibility
• PIX proprietary • Fibre-loaded EPDM compound for high thermal resistance and superior laterial
rigidity
Application: • High power transmission capacity
Scooter CVT drives
• Smooth operation over CVT drives
• Longer service-life
• Temperature range: -45°C to +120°C

VoyagerPlus®-XV Belts for CVT-drive, Electric Vehicles

Top width Thickness Angle Length Range
Section "TW" "TH" "A" "L"
(mm) (mm) (degree) (mm)
VP-X-TW TH A L 10 to 40 10 to 25 22 to 40 600 to 2000
VP-XX-TW TH A L 10 to 40 10 to 25 22 to 40 600 to 2000
VP-XN-TW TH A L 10 to 40 10 to 25 22 to 40 600 to 2000
Reference Standard:
• PIX proprietary Features:
• Superior construction to sustain high torque capacity under extreme operating
Application: conditions
Electric cars, ATV vehicles, • Engineered Cog design (single or double sided) for better flexibility & heat dissipation
CVT drives for automotive
• Specially engineered precise notch-profile offers extra protection to the Belt in CVT
vehicles, etc.
drives
• Superior grip to transmit maximum power with high efficiency
• Lower slippage, enhances the product life and efficiency

VP-X Section VP-XX Section VP-XN Section

ASYMMETRA® Asymmetric Belts

Top Mfg. Range Length
Width Thickness
Section (mm) Designation
(mm) β Min. Max.
α Angle Angle
AS-16X10 16.0 10.0 18° 2° 680mm 2240mm La
AS-19X10 19.0 10.0 18° 2° 680mm 2240mm La

Features:
Reference standard: • High lateral-rigidity, transmits higher power
• PIX Proprietary • Longer life
• Excellent shock absorbing capacity
Application:
• Temperature range: -25°C to +100°C
Go-karts, snowmobiles,
mini-bikes, material handling
and industrial equipment, etc.

23
AUTOMOTIVE BELTS
VECTOR®-XC Belts for Aviation engines
Rib Pitch Possible Minimum Mfg. Range (mm) Length
Thickness Pulley Diameter
Section (mm) (mm) Number Desig.
of Ribs (mm) Min. Max.
VT-PL 7.6 4.7 2 to 110 75 1200 5000 Le

Features:
• Enhanced power transmission capacity
• Special aramid cords offer high tensile strength and negligible elongation
Reference standard:
• Highly flexible, noise-free and smooth running operation
• RMA IP-26
• Least vibrations
Application: • Wear resistant, facilitates easy clutch operation
Helicopter / Rotor drive • Power transmission through a single Belt, eliminating the use of a set-of-Belts
• Machined, ribbed driving surface for maximum contact area and reduced face-pressure
• Temperature range: -25°C to +100°C

WhiteKnight®-XV Snowmobile Belts

Top width Thickness Angle Length Range
Section "TW" "TH" "A" "L"
(mm) (mm) (degree) (mm)
HD-TW TH A L 20 to 40 10 to 25 22 to 40 600 to 2000
HDX-TW TH A L 20 to 40 10 to 25 22 to 40 600 to 2000
XDX-TW TH A L 20 to 40 10 to 25 22 to 40 600 to 2000

Features:
Reference Standard: • Specially compounded aramid reinforced compound to withstand excessive load,
• PIX proprietary under extreme operating conditions
• Wear resistant sidewalls to sustain extreme high loads and RPM
Application: • Cog profile of the Belt enhances the flexibility and provides longer life
Snowmobiles • Excellent performance, even if, the equipment needs to be clutch-down
• Reduced slippage at elevated levels of torque
• Designed to withstand flexing, cycling, resists fatigue and stretch
• Excellent overall performance even at low temperature of up to -40°C
• HD series: Single-sided Belts, HDX series: Double-sided Belts, XDX series: Double-sided
high performance Belts

HD Section HDX Section XDX Section

CERTIFICATIONS

24
SERVICE EQUIPMENT
PIX-Digital Tension Meter
PIX Digital Tension Meter is used to correct the tension factor in a
drive, thus helping the users' to attain the optimum Belt-tension.

This equipment works on the frequency measurement

phenomenon.

PIX-X’Align (Laser-guided Pulley

Alignment Instrument)
Robust and highly effective maintenance tool, used to correct the
misalignment of pulleys in a drive.

PIX-Mobile App
PIX-Drive design app., version 3.0

PIX-Service Kit
PIX Service Kit is a composite gear with all essential tools required
by the users in maintaining the drive.

PIX-Belt Length Measure

It is used for checking the length of the Belt, where size on the Belt is
not illegible.

PIX-Pulley Gauges
PIX-Pulley Gauges are specially designed for checking the profiles of
the grooves of various conventional and dual-section pulleys.

25
SERVICE EQUIPMENT
PIX-Tension Tester
It is a manual Belt Tension tool, which is meant for correcting or re-
tensioning the drive with an adequate reliability.

PIX-Belt Profile Gauge

Used for checking the Belt profile.

PIX-Pentagon (Poly-V Belt Wear Gauge)

PIX-Pentagon is used as wear measurement gauge for Poly-V Belts.
Wear in ribs, belt thickness and cracks can be identified using
this tool.

PIX-Belt Product Kit

Belt display kit for the sales team. It comprises of cut Belt samples of
various types.

PIX-Belt Rack
Table-top metallic Belt display rack, can hold up to 72 Belts.

Dimensions (mm):
1200 (l) x 450(b) x 500(h), used for Automotive Belts.

PIX-X’slit (Belt Cutting Machine)

Precisely designed for cutting individual Timing Belts as well as
V-Ribbed Belts from the sleeves.

26
PI
XBel
tCat
alogue/
Nov2020