Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    GP100ORXP enUS ASTM

    Uploaded by

    Raul Armendariz
    GP100ORXP is a high density polyethylene resin developed for manufacturing gas distribution pipes. It has high molar mass and is produced using bimodal technology. It exhibits excellent mechanical properties, resistance to hydrostatic pressure and stress cracking. The resin meets the requirements for PE100 classification and has a minimum required strength of 10 MPa. It is manufactured in orange color with additives to protect against UV radiation and photodegradation. Typical applications include PE100 pipes for natural gas and underwater cable covers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GP100ORXP enUS ASTM

    Uploaded by

    Raul Armendariz
    27 views1 page
    GP100ORXP is a high density polyethylene resin developed for manufacturing gas distribution pipes. It has high molar mass and is produced using bimodal technology. It exhibits excellent mechanical properties, resistance to hydrostatic pressure and stress cracking. The resin meets the requirements for PE100 classification and has a minimum required strength of 10 MPa. It is manufactured in orange color with additives to protect against UV radiation and photodegradation. Typical applications include PE100 pipes for natural gas and underwater cable covers.

    Original Title

    GP100ORXP-enUS-ASTM

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    GP100ORXP is a high density polyethylene resin developed for manufacturing gas distribution pipes. It has high molar mass and is produced using bimodal technology. It exhibits excellent mechanical properties, resistance to hydrostatic pressure and stress cracking. The resin meets the requirements for PE100 classification and has a minimum required strength of 10 MPa. It is manufactured in orange color with additives to protect against UV radiation and photodegradation. Typical applications include PE100 pipes for natural gas and underwater cable covers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views1 page

    GP100ORXP enUS ASTM

    Uploaded by

    Raul Armendariz
    GP100ORXP is a high density polyethylene resin developed for manufacturing gas distribution pipes. It has high molar mass and is produced using bimodal technology. It exhibits excellent mechanical properties, resistance to hydrostatic pressure and stress cracking. The resin meets the requirements for PE100 classification and has a minimum required strength of 10 MPa. It is manufactured in orange color with additives to protect against UV radiation and photodegradation. Typical applications include PE100 pipes for natural gas and underwater cable covers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Datasheet

    11/10/2019

    High Density Polyethylene GP100ORXP

    Descrip on:

    GP100ORXP is a High Density Polyethylene compound specially developed for the manufacturing
    of extruded pipes for gas distribu on. It is produced with bimodal technology and has high molar
    mass. It shows excellent mechanical proper es and resistance to hydrosta c pressure and stress
    cracking. This resin has MRS (Minimum Required Strength) of 10 MPa, according to ISO 9080, and
    is classified as PE 100, according to ISO 12162. GP100ORXP is manufactured in orange color and
    contains addi ves to protect it against ultraviolet radia on ac on and photodegrada on. Meets
    the requirements of NBR 14462‐1:16 and ISO 4437‐1:14.

    Applica ons:
    PE100 classifica on in orange color, Pipes for natural gas, Underwater cable cover, Pressurized
    pipes

    Processes:
    Pipes Extrusion

    Control Proper es:
    Feature Method Units Values
    Melt Flow Rate (190°C/5kg) ASTM D 1238 g/10 min 0.25
    Density ASTM D 792 g/cm³ 0.948

    Typical Proper es ‐ Plaque1:
    Plaque Proper es
    Feature Method Units Values
    Tensile Strength at Yield (a) ASTM D 638 MPa 24
    Elonga on at Yield (a) ASTM D 638 % 10
    Tensile Strength at Break (a) ASTM D 638 MPa 38
    Elonga on at Break (a) ASTM D 638 % 1510
    Flexural Modulus ‐ 1% Secant (b) ASTM D 2240 ‐ 1050
    Shore D Hardness (c) ASTM D 2240 ‐ 64
    Izod Impact Strength (b) ASTM D 256 J/m NB
    Environmental Stress Cracking Resistance ‐ notch
    ASTM D 1693 h/F50 >1000
    0,3 mm; 50°C; 10% Igepal CO630 (a)
    Deflec on Temperature under Load at 0.455 MPa
    ASTM D 648 ºC 69
    (b)
    Vicat So ening Temperature at 10 N (b) ASTM D 1525 °C 125
    1 Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness: a) 2mm. b) 3mm c) 6mm.  NB = No break. 

    Final Remarks:
    1.  The informa on presented in this Data Sheet reflects typical values obtained in our laboratories, but should not be
    considered as absolute or as warranted values. Only the proper es and values men oned on the Cer ficate of Quality are
    considered as guarantee of the product.
    2.  For regulatory informa on of the product, please refer to Regulatory Document or contact our Technical Assistance Area.
    3.  For informa on about safety, handling, individual protec on, first aids and waste disposal, please refer to MSDS. 
    4.  The men oned values in this report can be changed at any moment without Braskem previous communica on.

    You might also like