Iron Roughneck ST-80C

Generation 1 Short Column without Reach Extender

Shipping Package: 30181800-ASM
Configuration: 30181800-500|501
User Manual

Customer References
Document Number: 10977506-
Revision:
Volume: 1

www.nov.com
 Document number 10977506-MAN
Revision 02
Page 2

REVISION HISTORY

02 19.03.2015 For Information I. Vargas L. Krajenbrink J. Walker

01 04.09.2014 For Information I. Vargas L. Krajenbrink J. Walker
Rev Date (dd.mm.yyyy) Reason for issue Prepared Checked Approved

CHANGE DESCRIPTION

Revision Change Description

01 Initial Release
02 Documentation Updates as Follows: Updated cover page to remove the description.

www.nov.com
 Document Number: 10977506-MAN TOC
TABLE OF CONTENTS
Revision:
Page: 1

Vol. Chapter/ Title Remarks

Section

1 1 General Information

1 2 Installation, Operation, & Maintenance

1 2.1 Procedures

1 2.2 Spare Parts List

1 3 Technical Documents & Drawings

1 3.1 General/Mechanical Drawings

1 3.2 System /Process Diagrams

1 3.3 Electrical/Instrument Section Not Applicable

1 3.4 Performance Data Section Not Applicable

1 4 Vendor Documentation Chapter Not Applicable

www.nov.com
 Document Number: 10977506-MAN TOC 1
TABLE OF CONTENTS
Revision:
Page: 1

Vol. Chapter/ Title Document Number Rev.

Section

1 1 General Information

Functional Design Specification, ST-80C D364000206-FDS-001 01

 FUNCTIONAL DESIGN
SPECIFICATION
ST-80C

This document contains proprietary and confidential information which belongs to National-Oilwell
Varco, L.P., its affiliates or subsidiaries (all collectively referred to hereinafter as "NOV"). It is
loaned for limited purposes only and remains the property of NOV. Reproduction, in whole or in
part, or use of this design or distribution of this information to others is not permitted without the
express written consent of NOV. This document is to be returned to NOV upon request and in any
event upon completion of the use for which it was loaned. This document and the information
contained and represented herein is the copyrighted property of NOV.
National Oilwell Varco TITLE
CURRENT INITIAL FUNCTIONAL DESIGN
DRAWN
E. AXELSON SPECIFICATION, ST-80C
CHECKED
J. WALKER SIZE DWG NO REV
APPVD
J. WALKER A D364000206-FDS-001 01
DATE
03/09/2010 SCALE NONE WT LBS SHEET 1 OF 2
D7DCF0045_FMT_AV-TPL-001/C
Functional Requirements: Iron Roughnecks
Unit Name: ST- 80C

Compact Iron Roughneck for highly portable installations. Pedestal

mounted unit with all hydraulic, manual controls mounted on the tool.
Unit combines spinning and torque functions into one wrench for safe,
Description
fast, and controlled make-up and break-out of drilling tubular
connections. The spinner rollers and torque wrench dies work directly
on the tool joint.

The control console mounted on the tool provides for spinner and
torque wrench clamp/unclamp, spin in and out, and torque functions,
as well as positioning controls. A single operator adjusts the position
of the tool both vertically and horizontally in either the storage or
Operator Controls working positions. The controls are designed such that a fine
adjustment is set to position the ST-80C precisely at either well center
or the mousehole, and the tool can consistently be positioned at either
location on a repetitive basis. The tool includes a rotating pedestal
which can rotate a full 360 degrees and can be locked at any position.

Specs/Features:
Pedestal mounted, drag up v-door, insert into socket installed in rig
Installation Method floor, connect hydraulic P&T. Requires socket to be structurally
supported in rig floor.
Connection Range 4-1/4” to 8-1/2" OD connection
Max Make-up Torque 60,000 ft lbs
Max Break-out Torque 80,000 ft lbs
Spin Speed 85 RPM typical on 6-5/8” OD connection
Spin Torque 1,550 ft lbs typical on 6-5/8” OD connection
Drill Pipe 3-1/2” to 6-5/8” nominal
Drill Collars from 4-1/2” to 8-1/2” OD
Bit Breaking No
Casing/tubing No
Operates at Mousehole Yes
Horizontal Adjustment 60”
Rotational Adjustment 360 degrees
Overall Vertical Travel 72” (Tall Column) / 36” (Short Column)
Nominal Connection Height 23” to 59”
Weight, Total 7800 lbs (Tall Column) / 7400 lbs (Short Column)
Required Hydraulic Supply 40 GPM max / 2500 PSI max
Local Controls Left side mount
Remote Controls No
Automated Feature No
Cycle Time 20 sec.
Optional Items None
Compatible with PS-21/30, PS-15/16/20

SIZE DWG NO REV

A D364000206-FDS-001 01
SCALE NONE WT LBS SHEET 2 OF 2
D7DCF0045_FMT_AV-TPL-001/C