BCY59VIII
BCY59VIII
BCY59VIII
DATA SHEET
M3D125
Philips Semiconductors
Product specication
BCY58; BCY59
PINNING PIN 1 2 3 emitter base collector, connected to case DESCRIPTION
handbook, halfpage 1
3 2
MAM264
QUICK REFERENCE DATA SYMBOL VCBO PARAMETER collector-base voltage BCY58 BCY59 VCEO collector-emitter voltage BCY58 BCY59 IC Ptot hFE collector current (DC) total power dissipation DC current gain BCY58/VII; BCY59/VII BCY58/VIII; BCY59/VIII BCY58/IX; BCY59/IX BCY58/X; BCY59/X fT toff transition frequency turn-off time IC = 10 mA; VCE = 5 V; f = 100 MHz ICon = 10 mA; IBon = 1 mA; IBoff = 1 mA Tamb 45 C Tcase 45 C IC = 2 mA; VCE = 5 V 120 180 250 380 150 170 250 350 500 480 450 220 310 460 630 800 800 MHz ns ns open base 32 45 100 340 1 V V mA mW W open emitter 32 45 V V CONDITIONS MIN. TYP. MAX. UNIT
1997 Jun 17
Philips Semiconductors
Product specication
BCY58; BCY59
MIN.
UNIT
mA mA mA mW W C C C
THERMAL CHARACTERISTICS SYMBOL Rth j-a Rth j-c PARAMETER thermal resistance from junction to case CONDITIONS VALUE 450 150 UNIT K/W K/W
CHARACTERISTICS Tj = 25 C unless otherwise specied. SYMBOL ICBO BCY58 ICBO collector cut-off current BCY59 IEBO hFE emitter cut-off current DC current gain BCY58/VII; BCY59/VII BCY58/VIII; BCY59/VIII BCY58/IX; BCY59/IX BCY58/X; BCY59/X IE = 0; VCB = 45 V IE = 0; VCB = 45 V; Tj = 150 C IC = 0; VEB = 5 V IC = 10 A; VCE = 5 V 20 40 100 20 95 190 300 10 10 10 nA A nA PARAMETER collector cut-off current IE = 0; VCB = 32 V IE = 0; VCB = 32 V; Tj = 150 C 10 10 nA A CONDITIONS MIN. TYP. MAX. UNIT
1997 Jun 17
Philips Semiconductors
Product specication
BCY58; BCY59
SYMBOL hFE
PARAMETER DC current gain BCY58/VII; BCY59/VII BCY58/VIII; BCY59/VIII BCY58/IX; BCY59/IX BCY58/X; BCY59/X
TYP. 170 250 350 500 250 300 390 550 100 250 700 875
MAX. 220 310 460 630 400 630 1000 350 700 850 1200 5 15 10
UNIT
hFE
DC current gain BCY58/VII; BCY59/VII BCY58/VIII; BCY59/VIII BCY58/IX; BCY59/IX BCY58/X; BCY59/X
IC = 10 mA; VCE = 1 V 80 120 160 240 IC = 100 mA; VCE = 1 V 40 45 60 60 50 150 600 750 150 IC = 100 mA; IB = 2.5 mA
hFE
DC current gain BCY58/VII; BCY59/VII BCY58/VIII; BCY59/VIII BCY58/IX; BCY59/IX BCY58/X; BCY59/X
VCEsat VBEsat Cc Ce fT F
collector-emitter saturation voltage IC = 10 mA; IB = 0.25 mA base-emitter saturation voltage collector capacitance emitter capacitance transition frequency noise gure IC = 10 mA; IB = 0.25 mA IC = 100 mA; IB = 2.5 mA IE = ie = 0; VCB = 10 V; f = 1 MHz IC = 10 mA; VCE = 5 V; f = 100 MHz IC = 200 A; VCE = 5 V; RS = 2 k; f = 1 kHz; B = 200 Hz
mV mV mV mV pF pF MHz dB
Switching times (between 10% and 90% levels) ton td tr toff ts tf ton td tr toff ts tf turn-on time delay time rise time turn-off time storage time fall time turn-on time delay time rise time turn-off time storage time fall time ICon = 100 mA; IBon = 10 mA; IBoff = 10 mA ICon = 10 mA; IBon = 1 mA; IBoff = 1 mA 85 35 50 480 400 80 55 5 50 450 250 200 150 800 150 800 ns ns ns ns ns ns ns ns ns ns ns ns
1997 Jun 17
Philips Semiconductors
Product specication
BCY58; BCY59
SOT18/13
j B
seating plane w M A M B M
1
k D1
2 3
a A D A L
5 scale
10 mm
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT mm A 5.31 4.74 a 2.54 b 0.47 0.41 D 5.45 5.30 D1 4.70 4.55 j 1.03 0.94 k 1.1 0.9 L 15.0 12.7 w 0.40 45
EUROPEAN PROJECTION
1997 Jun 17
Philips Semiconductors
Product specication
BCY58; BCY59
This data sheet contains target or goal specications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains nal product specications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specication is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specication. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1997 Jun 17
Philips Semiconductors
Product specication
BCY58; BCY59
1997 Jun 17
For all other countries apply to: Philips Semiconductors, Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Philips Electronics N.V. 1997
Internet: http://www.semiconductors.philips.com
SCA54
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
117047/00/02/pp8
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.