Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Original Material "S" Green: Technical Information

    Uploaded by

    Pedro Henriques Ramos
    This document provides technical information about a green polyethylene material including its properties, characteristics, and approvals. It details metrics like density, strength, hardness, thermal properties, and chemical resistance. Approval for food use is also mentioned.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Original Material "S" Green: Technical Information

    Uploaded by

    Pedro Henriques Ramos
    80 views1 page
    This document provides technical information about a green polyethylene material including its properties, characteristics, and approvals. It details metrics like density, strength, hardness, thermal properties, and chemical resistance. Approval for food use is also mentioned.

    Original Title

    Murtfeldt_Original-material-S-green_datasheet_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical information about a green polyethylene material including its properties, characteristics, and approvals. It details metrics like density, strength, hardness, thermal properties, and chemical resistance. Approval for food use is also mentioned.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    80 views1 page

    Original Material "S" Green: Technical Information

    Uploaded by

    Pedro Henriques Ramos
    This document provides technical information about a green polyethylene material including its properties, characteristics, and approvals. It details metrics like density, strength, hardness, thermal properties, and chemical resistance. Approval for food use is also mentioned.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Technical Information

    Original Material "S" green®


    Production based on PE-UHMW TG 1.2

    Technical properties Standard Unit Characteristics


    Legend
    Code ISO 1043-1 - PE-UHMW
    Material colour - - green The material characteristic tables, which
    Average molecular weight - g/mol 5 x 106 are based on data from our suppliers of
    Sheet group DIN EN ISO 15527 - 1.2 raw materials, are intended to help you
    Density DIN EN ISO 1183-1 kg/dm3 ≤0,94 to quickly compare/select a material. The
    Water absorption – saturation at 23 °C - % <0,01 values stated are short-term values that
    can be affected by processing,
    environmental, and application
    Mechanical properties 1)
    conditions. The user is solely responsible
    Yield stress DIN EN ISO 527-2 MPa ~20
    for the suitability of the selected material
    Breaking elongation DIN EN ISO 527-2 % >300
    for the specific application.
    Coefficient of elasticity (tensile test) DIN EN ISO 527-2 MPa >700
    Charpy impact strength – two-sided notch DIN EN ISO 179 kJ/m2 ≥170 RH Relative humidity
    Shore hardness D DIN EN ISO 868 ° 61-65
    Indentation hardness DIN EN ISO 2039 MPa >30 NB no break

    Sand-Slurry-Test DIN EN ISO 15527 % 100


    1) The mechanical and electrical
    Average coefficient of friction against steel 6) - µ ~0,2 characteristics are based on a test
    (0,25 m/s, 0,25 N/mm2) in standard atmosphere at 23 °C/
    Average coefficient of friction against POM 6) - µ - 50% relative humidity (RH).
    (0,25 m/s, 0,25 N/mm2)
    2) Temperature stress for several
    hours; no or low mechanical stress
    Thermal properties
    (short-term service temperature).
    Heat conductivity at 23 °C DIN 52612 W/(K x m) 0,4
    Linear thermal coefficient of expansion α: DIN EN ISO 11359-2 m/(K x m) 20 x 10-5 3) Maximum continuous operating
    (Average value between 23 and 60 °C) temperature in air: the specified
    Upper service temperature short-term in air 2) - °C 90 temperature limit is based on the
    Upper service temperature constant in air (5000h) 3) - °C 80 thermo-oxidative degradation
    Lower service temperature 4) - °C -200 (“aging”) after the specified period.
    Burning behavior UL 94 – sample thickness 3/6mm - - HB/HB It does not refer to the mechanical
    strength of the material.
    Melting temperature DIN EN ISO 3146 °C 130-135
    4) As the temperature decreases, the
    Electrical properties 1) impact strength drops. The specified
    Electric strength IEC 60243 kV/mm ≤45 values are based on the most
    Specific contact resistance IEC 60093 Ω x cm >1012 unfavourable impact load possible
    Specific surface resistance IEC 60093 Ω >1012 and do not represent absolute
    practical limits (lower service
    Approved for use in the food industry temperature).

    FDA yes
    5) The electric strength can be up to
    (EG) Nr. 1935/2004 - (EU) Nr. 10/2011 no 50% lower than for natural colored
    Under the designation materials (for black materials
    Original Material "S" green® [FS] yes Murylon®, Murylon®, Murytal®,
    Also available as food save material in accordance Murylat®, Murpec®).
    with regulation (EG) Nr. 1935/2004 - (EU) Nr. 10/2011
    6) Test period 24 h,
    oscillating measurement method.

    Chemical resistance of our materials:

    For a detailed selection chart, see our


    Internet Pages www.murtfeldt.com or
    www.kunststoffratgeber.de/en

    Murtfeldt Kunststoffe GmbH & Co.KG


    Heßlingsweg 14-16 T +49 231 20609-0 info@murtfeldt.de Last updated: June/2021
    D-44309 Dortmund F +49 231 251021 www.murtfeldt.com © Murtfeldt Kunststoffe GmbH & Co. KG

    You might also like