Pump Catalogue

PUMP CATALOGUE
Kolmeks Ltd is a Finnish pump and electric motor

manufacturer and part of the privately owned Brandt
Group. It is one of the most successful companies in
the pump business in Finland, operating in three main
business areas; pumps, electric motors and HVAC
systems. Kolmeks specializes in centrifugal pumps for
application in heating and air-conditioning. In addition,
Kolmeks’ products are used in district heating plants as
well as in district heating primary circulation systems.
Kolmeks – Efficient reliability

In industry, the pumps are typically The pumps and their motors are de-
used in the pulp, paper and chemical signed and manufactured in Finland
industries as well as in other process and they meet the demands of the Eco
industries. Notably, the major part Design directive in force as from 2013.
of Finnish spas and swimming halls Kolmeks was also among the first
are equipped with Kolmeks’ bron- Finnish companies to have received the
ze pumps suitable for chlorinated ISO 9001 quality certificate and the ISO
water. 14001 environmental certificate.
Our most important values are, environ-

mental consciousness, high quality of the
products, top-notch energy-efficiency and
low life-cycle cost.
Pump ranges Finnish internationalism
Kolmeks has two ranges of pumps In Finland, the market share of Kol-
with integrated frequency control; meks is, obviously, very large. A large
the SC- and TC-ranges. The smallest part, however, of Kolmeks’ pumps
pump with integrated frequency end up to be exported, to all major
control is 0,08 kW, the largest 22 kW. European countries, including Russia.
In addition all of the pumps are suited More and more Kolmeks products are
for control by external frequency also being exported to Middle-Eas-
control. tern, Asian and African countries.
Kolmeks pumps are available in four Ask us about our products and ser-
different materials; grey cast iron, vices! We will be more than happy to
nodular cast iron, bronze and stain- provide you with solutions
less steel casting. The pumps are
also available with several different
www.kolmeks.com
shaft sealing solutions – which makes
them suitable for numerous pumping
applications.
TABLE OF CONTENTS
DOMESTIC HOT WATER PUMPS, INLINE CENTRIFUGAL PUMPS WITH

INTEGRATED SC FREQUENCY CONVERTER, 1X230V
1
AEP,- series, threaded G1 – G1 ¼, p. 7 - 18
LP- and ALP-series, flanged DN50, DN100
DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V

AP-, AKP- and AEP- series, threaded G1/2 – G1 ¼
2
p. 21 - 33
INLINE PUMPS WITH INTEGRATED SC FREQUENCY CONVERTER, 1X230V

AE- series, threaded G3/4 – G1 ¼
3
L- and AL- series, flanged DN32 – DN100 p. 35 - 65
INLINE PUMPS WITH FIXED SPEED-MOTOR, 3X400V

4
L-, AL- and AKN- series, flanged DN32 – DN300 p. 67 - 132
INLINE TWIN PUMPS WITH FIXED-SPEED MOTOR, 3X400V

T- and AT- series, flanged DN32 – DN250
5
p. 135 - 195
END-SUCTION PUMPS WITH FIXED-SPEED MOTOR, 3X400V

AS-, KN- and KM- series, flanged DN32 – DN65
6
p. 197 - 217
ATEX PUMPS WITH FIXED-SPEED MOTOR, 3X400V

AE- L- and T- series, threaded G3/4-, G1 and flanged DN50
7
p. 219 - 232
PUMP ACCESSORIES, SPECIAL SURFACE TREATMENTS AND

DOCUMENTATION
8
p. 235 - 240
PUMP SERVICE
9
p. 243 - 252
LOREM IPSUM JE ZULT
TEKNISET TIEDOT
MAAR 60 HZ
m Head
35
1m/s 2m/s 3m/s 4m/s 5m/s
Ø144
30
25
NPSH
Ø138
m
4
20 8
14
Ø
15 6
Ø133
10 4
Ø128
5 2
0
0 5 10 15 20 25 30 35 40 l/s
Flow
3
0 20 40 60 80 100 120 140 m/h
kW Shaft power P2
10 Ø144
9 Ø138
8 Ø133
7
6 Ø128
5
4
3
2
1
0
0 5 10 15 20
INLINE PUMPS WITH TAAJUUSMUUTTAJAPUMPUT
25 30
INTEGRATED SC FREQUENCY
35 40 l/s
kW
11
Total input power P1
Ø144 Ø138
CONVERTER,
SC-SARJA
1x230V
10
9
Ø133
8
7 L- and AL- series, flanged DN32 – DN100
Ø128
6
5
4
3
2
1
0
0 5 10 15 20 25 30 35 35 40 l/s www.kolmeks.com
www.kolmeks.fi
Oikeus muutoksiin pidätetään
SC-INLINE PUMPS - AE, L and AL
General technical data

SC Series of Kolmeks circulation pumps and variable speed controlled centrifugal
pumps with integrated frequency converter.
Applications
Cast iron SC series pumps can be used as circulation, pressure boosting and
transfer pumps for clean liquids.
• Bronze SC pumps can be used as domestic hot water, circulation,
pressure boosting and transfer pumps for clean , oxygen-rich and some
slightly aggressive liquids.
• Stainless steel AISI316 SC pumps can be used as circulation, pressure
boosting and transfer pumps for clean and aggressive liquids.
The most common applications of the SC pump series are heating, ventilation,
3 cooling and heat recovery systems, heat exchangers, pressure boosting, district
heating plants, ice rinks, swimming pools, spas and industrial processes.
Quick Selection Chart

m
20
AE-20/2SC_ 0,65kW
AE-25/2SC_ 0,65kW
AE-26/2SC_ 0,65kW
L-32A/2SC_ 0,65kW
10
L-6
5 A/
AE-20/4SC_ 0,2kW 4S
AE-25/4SC_ 0,2kW C_
0,7
AE-26/4SC_ 0,2kW 5k
W
L-5 65A
L-
0A /4
/4 SC_
5
SC 0
A
_ 0 ,55
A E-3 L-80A/4SC_ 0,75kW

,5 kW
L- E-33 2/4
5k
AE 40 / SC
W
AE -32/ A/ 4S _
-3
L-4 3/ 4 S 4S C_ 0,3
C _ C_ 0,3 7k
0A 4SC 0,2
/4 _ k 0, 7k W
SC 0,2 W 37 W
_ 0 kW kW
,2k
W
AE-20/4SC_ 0,08kW
AL-1102/4SC_
AE-25/4SC_ 0,08kW
0,75kW
AE-26/4SC_ 0,08kW
2
L-3
2A
L-80A/4SC_ 0,55kW
/4S
W
C_
k
0,2
0,0
C_
8kW
4S
A/0
L-5
1
1 2 5 10 20 l/s
www.kolmeks..com 36 04/2013 Subject to change without prior notice.

Structure
Pump
SC series pumps are monoblock-structured centrifugal pumps with a dry asynchronous motor. A frequency converter is in-
tegrated into the motor. The pump impeller is installed directly onto the shaft of the electric motor (no separate couplings).
Electric motor
The electric motor of an SC pump is a three-phase Kolmeks asynchronous motor designed for pump and frequency con-
verter operation, which guarantees high starting torque and low energy consumption. The electric motor is highly efficient
and has low noise levels.
Supply voltage: 1 x 230 V, 50 Hz

Enclosure class: IP 54
Insulation class: F
Duty type: Continuous duty (S1)
Ambient temperature: 0°C ... +40°C (max. +35°C diurnal average)
3
Connections
Flanged:
The flanges of SC pump fit counter-flanges dimensioned according to ISO 7005.
Threaded:
The SC pump threads are dimensioned according to Standard ISO 228/1.
Seals
The standard shaft seal of an SC series pump is a single mechanical seal. The pump housing seal is O-ring or a gasket. Other
seal options are available by request.
Advantages of selecting an SC pump

• The pump is adjusted manually / automatically adjusts its duty to match the requirements of the system
• The duty point, and therefore the electric power consumption, is determined by actual flow requirements, resulting
in reduced running and life cycle costs.
• Depending on pump size, the payback period compared to a fixed speed pump is 0.5–2.5 years (see example).
04/2013 Subject to change without prior notice. 37 www.kolmeks.com

L-65A/4 0.55kW constant speed

L-65A/4SCG 0.55kW with integrated frequency converter
Accumulative cost
Life cycle cost comparison between an L-65/A 0.55 kW fixed speed pump and an SC pump
vakionopeuspumppu
Fixed speed pump
SC pump
SC-pumppu Service
Payback period about

Takaisinmaksuaika n. 1.2
1,2 v
3
years
Vakiopumppu
Fixed speed pump
Service
SC-Taajuusmuuttajapumppu
SC pump
Pump
price
(year)
Price difference between constant Use of energy

speed and SC pump (purchase price)
Cost-benefit analysis, Q=6l/s, H=35kPa

Kolmeks recommendation for pumps in district heating circulation

systems
As the payback period for installing a Kolmeks SC variable speed pump is short, Kolmeks recommends the use of variable
speed pumps in new systems and the replacement of fixed speed pumps with variable speed pumps in existing systems.

District heating system with two secondary circuits
Supply for all pumps
 
Control unit
1 x 230 V

Advantages
of an SC pump 
Pump control
- Alarms to 
BMS cabin

- Duty point can be adjusted in  

one step 
- Operates according

requirements (radiator
to system
and

3
air heating
circulation)
- Energy savings

- Reliable operation
 
Outlet 
Inlet 
Outlet 
Inlet



Exchanger 
Exchanger

Hot domestic water circulation 
Heat line water

District heating system with three secondary circuits

Control unit

Pump control cabin


 
Inlet
 Outlet
 Inlet
 
Outlet Inlet

Outlet

Exchanger
 Exchanger
 Exchanger

  

Hot domestic water 
 
Radiators circulation Air heating circulation
circulation 
Examples of Kolmeks recommendations for pumps in district heating circulation systems

Standard materials and fields of application for SC pumps

Connection Grey cast Nodular Bronze Stainless Shaft seal O-ring O-ring Motor
size iron cast iron steel PN10
EN-GJL-200 EN-GJS-400 CuSn10Zn2 AISI 316 Ø [mm] size material
G or DN PN10 PN16 PN10 PN 16 materials [mm] [kW]
0,08 and
G 3/4 AE-20/4 SC_ no no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,2
AE-20/2 SC_ no no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,65
0,08 and
AE-25/4 SC_ no AEP-25/4 SC_ no 12, carbon/SiC Viton 123 X 2,5 NBR 0,2
0,08 and
3 G1 AE-26/4 SC_
AE-25/2 SC_
no
no
AEP-26/4 SC_
AEP-25/2 SC_
no
no
12, carbon/SiC Viton 123 X 2,5
12, carbon/SiC Viton 123 X 2,5
NBR
NBR
0,2
0,65
AE-26/2 SC_ no AEP-26/2 SC_ no 12, carbon/SiC Viton 123 X 2,5 NBR 0,65
G 1 1/4 AE-32/4 SC_ no AEP-32/4 SC_ no 12, carbon/SiC Viton 145 X 2,5 NBR 0,2-0,37
AE-33/4 SC_ no AEP-33/4 SC_ no 12, carbon/SiC Viton 145 X 2,5 NBR 0,2-0,37
0,08 and
DN 32 L-32/4 SC_ no no no 12, carbon/SiC EPDM 100 X 2,5 NBR 0,2
L-32/2 SC_ no no no 12, carbon/SiC EPDM 100 X 2,5 NBR 0,65
DN 40 L-40A/4 SC_ no no no 12, carbon/SiC EPDM 145 X 2,5 NBR 0,2-0,37
0,2 and
DN 50 L-50A/4 SC_ no LP-50A/4 SC_ no 12, carbon/SiC EPDM 150 X 3 NBR 0,55
0,55 and
DN 65 L-65A/4 SC_ LH-65A/4 SC_ no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,75
0,55 and
DN 80 L-80A/4 SC_ LH-80A/4 SC_ no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,75
ALS-
DN 100 AL-1102/4 SC_ ALH-1102/4 SC_ ALP-1102/4 SC_ 1102/4 SC_ 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,75
Operating temperature -15...+95 oC

PN10 = Max. working pressure 10bar, grey cast iron and bronze
PN16 = Max. working pressure 16bar, nodular cast iron and stainless steel

Rating plate information

Additional accessories: Special impeller material:
T = Seal for aggressive liquids (external) PM = Bronze
H = Flushing SS = stainless steel AISI316
KT = Double mechanical seal
Sn = Non-standard mechanical seal
Kn = Non-standard surface treatment
Pump type Motor code marking

Serial number, Pressure class Impeller size
Duty point, Max liquid temperature Electrical power at duty point
Motor type Supply voltage phase number,
Nominal voltage and current frequency and duty type
Rotation speed, insulating and
enclosure class
Nominal shaft power
Minimum efficiency index (MEI) 3
Manufacturer, Country of origin Bearing types, CE marking
1 2 3 4 5
AL - 110 2 / 4 SC B
L P - 50 A / 4 SC C
1) Pump series: 3) Flange DN size: 4) Electric motor pole number:

AE-, L-, AL- 20 = 3/4” 2 = rotation speed 50 r/s (50 Hz)
25 = 1” 4 = rotation speed 25 r/s (50 Hz)
2) Material of housing, sealing 32 = DN 32 rotation speed 30 r/s (60 Hz)
40 = DN 40 rotation speed 32.5 r/s (65 Hz)
flange and impeller: 50 = DN 50
no letter = Grey cast iron EN-GJL-200 65 = DN 65
H = Nodular cast iron EN-GJS-400 5) SC = SC frequency converter
80 = DN 80
P = Bronze CuSn10Zn2 110 = DN 100 integrated into pump
S = Stainless steel AISI 316 Pump adjustment method:
SCA, SCB, SCC, SCD, SCF, SCG, SCM
(see Adjustment and connections)
Pump installation
The pump can be installed in the piping without additional support. The position of the motor unit and therefore the
location of the frequency converter box can be changed by detaching the motor unit from the pump housing and turning it
to the required position, within certain limitations.
Ensure the following when installing the pump:

- Enough room for control, service and inspections
- The installation position should be chosen such that the display is readable; a separate control panel can be used if
required.
- Possibility to use lifting and transfer devices if required
- Shut-off valves on both sides of the pump
- The pump must be installed in such a position that the frequency converter of the pump is not in the immediate vicinity
of a hot pipe.

Operating positions
Permitted operating positions Prohibited operating positions
Motor units:
SCB, SCC, SCD and SCF pumps
The complete pump motor unit is a new spare motor unit which includes:
- Electric motor
- Frequency converter
- Transmitter quick connection plug with wires
- Sealing flange
- Impeller
- Seals
When replacing the motor unit, no piping or electrical work is required, as there pistoliitin
is no need to detach the pump housing, and the power supply is connected using
a quick connection plug. There is also no need to detach the transmitter or its
tubes. Only the cap screw of the plug connector at the top of the transmitter is
opened, which enables the plug connector and its wiring to be pulled out. In the
new motor unit, the connection plug is pre-wired, which allows quick replace-
ment of the transmitter electrical connection.
SCA and SCG pumps

The complete pump motor unit is a new spare motor unit which includes:
- Electric motor
- Frequency converter
- Sealing flange
- Impeller
- Seals

Control methods and control connections

SC pump I/Os (inputs and outputs)
Terminal 4 Programmable 4-20 mA, 0–5 VDC, 0–10 VDC analog input (voltage/current
selection switch)
Terminal 2 Programmable 0–10 VDC, 0–5 VDC analog input
Terminals STF, STR, RH, RM, RL Programmable digital inputs
Terminal PC 24 VDC voltage supply for digital inputs and feedback transmitter
(max. 100 mA)
Terminal 10 5 VDC voltage supply for potentiometer

3
Terminal 5 Signal ground
AM / 5 Programmable analog output
Relay output, Terminals A,B, C Fault indication (programmable relay output), potential free change-over
contacts
max. 230 VAC / 0.3 A, cos fii 0.4,
max. 30 VAC / 0.3 A
Transistor output, Terminals RUN, SE Load 27 V / 0.1 A, voltage loss 3.4 V
Terminal factory settings

Terminal 4 Programmed as feedback input 4–20 mA or not in use depending on the pump
control method
Terminal 2: 0–10 VDC direct speed reference or controller reference depending on control
method used, or not in use.
Terminal STF: Jumper between terminals PC–STF open/closed = pump off/on
Terminal STR: Not in use
Terminal RH: Dry running protection in the SCD version
Terminal RM: Jogging operation. PC – RM open/closed = normal operation / runs forced

at 40 Hz frequency.
AM / 5: Analog output 0–10 VDC. SCCVAK (direct speed reference from automation) and
in SCG versions programmed as frequency. SCB, SCC, SCCVAK (differential
pressure reference from automation), in SCD and SCF version programmed as
feedback.
Relay output, Terminals A,B ja C: The relay output is programmed with fault information. The relay draws:
Terminals A and C connected, when the pump runs or voltage is connected to it.
Terminals B and C connected, when the device is in fault mode or dead.

SCA pump: Direct speed reference by potentiometer

Applications
For systems with no continuous automatic adjustment requirement and a constant duty point, such as domestic hot water
circulation systems, for example.
Accessories
Pump and frequency converter.
Operating principle
The rotation speed of the pump is set in one step using the buttons on the frequency converter when commissioning the
pump. The desired frequency is selected using the control panel potentiometer, and is saved by pushing the SET button.
The pump rotates at a constant set rotation speed. As the pump is running, it is possible to select the motor current (A) or
start frequency (Hz) on the display by pushing the SET button. Panel use can be locked by pushing the MODE button for 2
3 seconds. The panel can be unlocked in the same way.
Pump curve
The pump QH curve equals the QH curve of a standard speed pump.
Standard control connections, PU / EXT COMBINED OPERATION MODE

ALARM
INDICATION
BMS CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD

SCB pump: Constant differential pressure across pump

Applications
For circulation systems where flow rates vary and the majority of pressure loss is created at consumption targets. For
example, heating and cooling systems and pressure boosting in parallel circulation systems.
Accessories
Pump, frequency converter, differential pressure transmitter and measurement pipes installed in the suction and discharge
flanges of the pump.
Operating principle and system adjustment

Constant differential pressure is maintained between the pump flanges, and is set to Parameter 133 of the frequency
converter as percentages of the maximum measurement value of the differential pressure transmitter (mentioned in the
differential pressure transmitter). As the pump rotates, it is possible to select the start frequency (Hz), motor current (A)
or differential pressure feedback (% of the maximum measurement value of the differential pressure transmitter) on the
display by pushing the SET button. Panel use can be locked by pushing the MODE button for 2 seconds. The panel can be
3
unlocked in the same way.
Pump curve
The QH curve of the pump is horizontal, which is applicable for circulation systems where the pressure loss of the heat
source is low in relation to the total pressure loss.
ALARM
INDICATION
BMS CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD
PUMP IN RETURN PIPE
PUMP IN SUPPLY PIPE

SCC pump: Constant differential pressure in piping

Applications
For circulation systems where flow rates vary significantly and the majority of pressure loss is created at consumption
targets. For example, heating and cooling systems and pressure boosting in parallel circulation systems.
Accessories
Pump, frequency converter, differential pressure transmitter with pipes, one of which is installed in the suction or pressure
flange in the pump and the other in the system’s inlet or outlet pipe.
Operating principle and system adjustment

Constant differential pressure is maintained over the inlet and outlet lines of the system, and is set to Parameter 133
of the frequency converter as percentages of the maximum measurement value of the differential pressure transmitter
(mentioned in the transmitter). As the pump rotates, it is possible to select the frequency (Hz), motor current (A) or
3 differential pressure feedback (% of the maximum measurement value of the differential pressure transmitter) on the
display by pushing the SET button. Panel use can be locked by pushing the MODE button for 2 seconds. The panel can be
unlocked in the same way.
Pump curve
The pump QH curve is automatically square. The shape of the QH curve depends on the relation of the heat source pressure
loss to the total pressure loss of the circulation system. The larger the share of the heat exchanger pressure loss is in
relation to the circulation system’s total pressure loss, the steeper the QH curve is.
ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD PUMP IN RETURN PIPE
PUMP IN SUPPLY PIPE

SCCVAK pump: Constant differential pressure in piping

by BMS PI-controller
Operating principle (speed reference to pump as voltage signal 0–10 V)
Constant differential pressure is maintained over the return and supply pipe of the system by setting it in the BMS (direct
speed reference to pump as voltage or current signal). The differential pressure feedback measurement is connected to
the BMS.
System adjustment/balancing
When adjusting and balancing the system, the differential pressure transmitter is connected to the BMS. The main
control valve is fully opened and the flow is adjusted using the frequency converter display by entering the correct
frequency. When the system is balanced and the desired flow is obtained, the differential pressure value of the
differential pressure transmitter is read in the BMS and programmed into the BMS as a reference value.
Alternatively, the accurate constant differential pressure value can be accessed when the pump is SCC connected (see 3
previous section). A wire loop must be installed between Terminals PC and RL (control run). When the system is balanced
and the correct flow is obtained, the reference value of differential pressure (m) can be read (Parameter 133). It is
programmed into the BMS as a reference value.
Standard control connections, EXT OPERATION MODE
ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD PUMP IN RETURN PIPE
PUMP IN SUPPLY PIPE

SCCVAK pump: Constant differential pressure in piping by frequency

converter PI-controller
Operating principle
Constant differential pressure is maintained over the inlet and outlet line of the system by setting it in the BMS
(differential pressure reference value as voltage current signal 0–10 V). These connections and operation are the same as
for the SCC pump: Constant differential pressure in piping, but here, instead of using the keyboard, the differential pressure
reference value is set externally from the BMS between terminals 2 and 5 (Parameter 133 = 9999).
NOTE! If the BMS is not operational when pumping is required, set the differential pressure using Parameter 133 (see SCC
pump).

3
ALARM
INDICATION
BMS CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD
PUMP IN RETURN PIPE
PUMP IN SUPPLY PIPE

SCD pump: Constant pressure in discharge flange (pressure boosting)

Applications
For pressure boosting and other open systems which require a constant pressure.
Accessories
Pump, frequency converter and pressure transmitter which is installed either on the pump discharge flange or consumption
point.
Operating principle
The pump maintains constant pressure at the installation point of the pressure transmitter. The pressure is set to
Parameter 133 of the frequency converter as percentages of the maximum measurement value of the differential pressure
transmitter (found in the pressure transmitter). As the pump rotates, it is possible to select the frequency (Hz), motor
current (A) or pressure feedback (% of the maximum measurement value of the pressure transmitter) on the display by
pushing the SET button. Panel use can be locked by pushing the MODE button for 2 seconds. The panel can be unlocked in
the same way.
3
ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD
Dry run protection

SCF pump: Constant temperature

Applications
For heating or cooling systems which maintain constant temperature by adjusting the flow rate.
Accessories
Pump, frequency converter and temperature transmitter.
Operating principle
The system maintains a constant temperature which is set to Parameter 133 as percentages of the maximum
measurement value of the temperature transmitter (found in the temperature transmitter). As the pump rotates, it is
possible to select the frequency (Hz), motor current (A) or temperature feedback (% of the maximum measurement value
of the temperature transmitter) on the display by pushing the SET button. Panel use can be locked by pushing the MODE
button for two seconds. The panel can be opened in the same way.
3
NOTE! Please state the adjustment direction when ordering the pump. Normal when pumping is decreased as the
temperature (feedback) increases, inverse when pumping is increased as the temperature increases. 128 => normal = 20,
inverse = 21).
ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD

SCG pump: Pump speed controlled by external automation

For systems with varying flow rates and/or in which the flow rate is adjusted using the pump. The pump is controlled
centrally or by a separate controller.
Accessories
Operating principle
The pump is given a direct speed reference externally e.g. from the BMS, a separate controller, process control, etc.
NOTE! If the BMS is not operational when pumping is required, use Parameter 79 to select PU/EXT combined operation
(Par 79: 0=>3). After this, the standard speed of the pump can be set in the same way as for an SCA pump.
Standard control connections, EXT OPERATION MODE 3
ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD

SCM pump: Automation controlled pump with MODBUS RTU bus

For systems with varying flow rates and/or in which the flow rate is adjusted by the pump. The pump is controlled centrally
or by a separate controller.
Accessories
Operating principle
The adjustment, control, measurement, indication and alarms of the pump frequency converter is carried out externally
using building automation, process control, or by means of MODBUS RTU bus functions.
Standard control connections, NET COMBINED OPERATION MODE

3 ALARM
BMS
INDICATION
CONTROL
MEASUREMENT
ADJUSTMENT
DISTRIBUTION BOARD

Local control panel

A separate local control panel is available as an accessory for the SC pump.
The control panel is equipped with cables which can control and monitor
all operations of the SC pump. It makes it easier to set frequency converter
parameters if the positioning of the pump makes it difficult to see the keyboard,
for example.
Service and spare parts

The pump does not require regular service. The shaft seal is a mechanical seal.
It is a part which undergoes wear and which must be replaced if it starts to
leak. Please note that the leakage of a few drops per hour can be quite normal,
especially when pumping water-glycol mixtures.
Seal kits
Pump type Seal Housing O-ring
3
mm / gasket mm
AE_-25/-26 SC_ 12 123x2,5
L_-32A SC_ 12 100x2,5
L_-40A SC_, AE_-32/-33 SC_ 12 145x2,5
L_-50A SC_ 12 150x3
L_-65A SC_, L_-80A SC_, AL_-1102 SC_ 18 179,3x5,7 1 Rotating ring
2 Stationary ring
3 Body/bellows
4 Spring
Bearings in pump motors are pre-lubricated and can withstand several years 5 O-ring
of continuous use. If a motor malfunction occurs, we recommend replacing the
whole motor unit.

Other parts
1 Electric motor
2 Pump housing
3 Impeller
5 Sealing flange
8 Foot
24 Screw or nut
25 Washer
26 Key
40 Shaft seal
50 Housing O-ring
60 Nut / Screw
67 Screw
80 Pipe union (LH and ALH series)
3 81 Pipe union (LH and ALH series)
86 Pipe (LH and ALH series)
103 Frequency converter
111 Fixing plate (SCB, SCC)
112 Pipe joints (SCB, SCC)
113 Pipes (SCB, SCC)
114 Transmitter for differential pres-
sure (SCB, SCC), pressure (SCD) or
temperature (SCF)
115 Cable (SCB, SCC, SCD, SCF)
117 Screws (SCB, SCC)
WHEN ORDERING SPARE PARTS, PLEASE STATE THE PUMP TYPE, SERIAL NUMBER, DUTY POINT, IMPELLER SIZE, ELEC-
TRIC MOTOR TYPE AND POWER. THESE CAN BE FOUND ON THE RATING PLATE.

Reading curves:
Characteristic curves apply to +20°C water. Liquids whose viscosity differs from that of water must be taken into account
when dimensioning the pump. Please contact Kolmeks for further information.
Thread or flange size Pump type Rotation speed range Impeller size Supply voltage
L-50A/4 SC LP-50A/4 SC Flow speed in pump flanges
DN 50 600 - 1800 r/min Ø 135 mm 1~ 230 V
9
H [m] Best efficiency
1 m/s 2 m/s 3 m/s 4 m/s
60 HZ
point BEP
8
7
55 Hz QH curve at max.
6
50 Hz
BEP
output frequency
(60Hz) 3
5 45 Hz
5m
QH curve at different
4 40 Hz
frequencies (55 Hz).
35 Hz
3
Minimum frequen-
30 Hz
2
25 Hz
cy curve is 20 Hz.
1
20 Hz SC pumps have a
minimum frequency
0
0 1 2 3 4 5 6 7 8 9 Q [l/s] of 10 Hz as a factory
0 5 10 15 20
5,5 l/s
25 30 Q [m3/h]
setting.
P1 [kW]
0,8
1800 Electric power on
0,6
0,52kW 1650 different rotation
0,4
1500 speed ranges.
1350
1200
0,2 1050
900
750
Motor P 2N [kW] I N [A] (1x230V) [kg] 0,0
600
KHSC-100 A2 F15 0,55 4,6 42 0 1 2 3 4 5 6 7 8 9 Q [l/s]
Electric motor Pump Nominal Pump weight Intersection at

type
www.kolmeks.fi nominal
Subject to change without prior notice single-phase best efficiency 17.02.2012
shaft power current point (BEP)

Dimensional
drawing
An example of selecting a pump:

Duty point 5.5 l/s, 50kPa (5m)
1. Find a pump size with a BEP (best efficiency point) which is as close as possible to the required duty point.
2. Ensure that the output 5.5 l/s and head 5m intersect at the best efficiency point.
3. The best energy efficiency and lowest energy consumption are obtained by following the above steps.
4. If needed, it is possible to read the input power of the device on the P1 curve. In this case, the input power is 0.52 kW at
the desired duty point.
NOTE! Liquid density and viscosity affect the amount of power required. Please check that the motor power is sufficient
for liquids with a higher density and viscosity than water.

AE-20/4 SC
G 3/4 600-1500 r/min Ø 125 mm 1~ 230 V

H [m]
6
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s 6 m/s
50 Hz
5
BEP
45 Hz
4
40 Hz
35 Hz
2
30 Hz
25 Hz
1
20 Hz
3 0
0,0
0
0,2
1
0,4
2
0,6 0,8
3
1,0
4
1,2 1,4
5
1,6
6
1,8
7
2,0
Q [l/s]
Q [m3/h]
P1 [kW]
0,15
1500
1350
0,10
1200
1050
0,05 900
750
600

0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0
Q [l/s]
OPSC-742 N12 0,08 1,1 15
www.kolmeks.fi Subject to change without prior notice 10.02.2012
AE-20/4 SC
G 3/4 600 - 1950 r/min Ø 125 mm 1~ 230 V

H [m]
10
2 m/s 4 m/s 6 m/s 8 m/s
9 65 HZ
8
60 Hz
BEP
7
55 Hz
6
50 Hz
5
45 Hz
4
40 Hz
3
35 Hz
2 30 Hz
25 Hz
1 20 Hz
0
0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 Q [l/s]
0 2 4 6 8 10 Q [m3/h]
P1 [kW]
0,35
0,30
1950
0,25 1800
0,20 1650
1500
0,15 1350
0,10 1200
1050
900
0,05 750
600
0,00
Motor P 2N [kW] I N [A] (1x230V) [kg] 0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 Q [l/s]
OPSC-752 N12 0,2 2,1 15

AE-20/2 SC
G 3/4 1200 - 3000 r/min Ø 125 mm 1~ 230 V

H [m]
25
2 m/s 4 m/s 6 m/s 8 m/s 10 m/s
50 Hz
20
45 Hz BEP
15
40 Hz
35 Hz
10
30 Hz
25 Hz
5
3
20 Hz
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
0 2 4 6 8 10 12 14 Q [m3/h]
P1 [kW]
1,0
3000
0,8
2700
0,6
2400
0,4 2100
1800
0,2 1500
1200

0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
KHSC-841 N12 0,65 6,0 19
AE-25/4 SC AEP-25/4 SC AE-26/4 SC AEP-26/4 SC
G1 600 - 1500 r/min Ø 125 mm 1~ 230 V

H [m]
6
1 m/s 2 m/s 3 m/s
AE_-25/4 AE_-26/4
50 Hz
5
BEP
45 Hz
4
40 Hz
3
35 Hz
2 30 Hz
25 Hz
1
20 Hz
0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 Q [l/s]
0 1 2 3 4 5 6 7 Q [m3/h]
P1 [kW]
0,15
1500
1350
0,10
1200
AE-25/4 AEP-25/4 AE-26/4 AEP-26/4 1050

0,05 900
750
600

0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 Q [l/s]
OPSC-742 N12 0,08 1,1 14

G1 600 - 1950 r/min Ø 125 mm 1~ 230 V

H [m]
10
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
AE_-25/4 AE_-26/4
9 65 HZ
8
60 Hz
BEP
7
55 Hz
6
50 Hz
5
45 Hz
4
40 Hz
3
35 Hz
2 30 Hz
25 Hz
3 1
0
20 Hz
0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 Q [l/s]

0 2 4 6 8 10 Q [m3/h]
P1 [kW]
0,35
0,30
1950
0,25 1800
0,20 1650
AE-25/4 AEP-25/4 AE-26/4 AEP-26/4 1500
0,15 1350
1200
0,10 1050
900
750
0,05 600
OPSC-752 N12 0,2 2,1 15 0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 Q [l/s]
G1 1200 - 3000 r/min Ø 125 mm 1~ 230 V

H [m]
25
2 m/s 4 m/s 6 m/s
AE_-25/2 AE_-26/2
50 Hz
20
45 Hz BEP
15
40 Hz
35 Hz
10
30 Hz
25 Hz
5
20 Hz
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
0 2 4 6 8 10 12 14 Q [m3/h]
P1 [kW]
1,0
3000
0,8
2700
0,6
2400
AE-25/2 AEP-25/2 AE-26/2 AEP-26/2
0,4 2100
1800
0,2 1500
1200

0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
KHSC-841 N12 0,65 6,0 19

L-32A/4 SC
DN 32 600 - 1500 r/min Ø 105 mm 1~ 230 V

H [m]
4,0
1 m/s 2 m/s 3 m/s
3,5 50 Hz
3,0
45 Hz
2,5
40 Hz BEP
2,0
35 Hz
1,5
30 Hz
1,0 25 Hz
3
20 Hz
0,5
0,0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s]
0 2 4 6 8 10 Q [m3/h]
P1 [kW]
0,15
1500
0,10 1350
1200
1050
0,05 900
750
600

0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s]
OPSC-742 N12 0,08 1,1 14
L-32A/4 SC
DN 32 600 - 1950 r/min Ø 105 mm 1~ 230 V

H [m]
6 65 HZ
1 m/s 2 m/s 3 m/s 4 m/s
60 Hz
5
BEP
55 Hz
4
50 Hz
3 45 Hz
40 Hz
2
35 Hz
30 Hz
1 25 Hz
20 Hz
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
0 2 4 6 8 10 12 14 Q [m3/h]
P1 [kW]
0,3
1950
1800
0,2
1650
1500
1350
0,1 1200
1050
900
750
600
Motor 230V P 2N [kW] I N [A] (1x230V) [kg] 0,0

0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
OPSC-752 N12 0,2 2,1 19

L-32A/2 SC
DN 32 1200 - 3000 r/min Ø 105 mm 1~ 230 V

H [m]
16
2 m/s 4 m/s 6 m/s
14 50 Hz
12
45 Hz
BEP
10
40 Hz
8
35 Hz
6
30 Hz
4 25 Hz
3 2
20 Hz
0
0 1 2 3 4 5 6 7 Q [l/s]
0 5 10 15 20 25 Q [m3/h]
P1 [kW]
1,0
3000
0,8
2700
0,6
2400
0,4
2100
0,2 1500
1200
0 1 2 3 4 5 6 7 Q [l/s]
KHSC-841 N12 0,65 6,0 24
G 1 1/4 600 - 1500 r/min Ø 130 mm 1~ 230 V

H [m]
6
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
AE_-32/4 AE_-33/4 50 Hz
45 Hz
BEP
4
40 Hz
3
35 Hz
2 30 Hz
25 Hz
1 20 Hz
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]
0 2 4 6 8 10 12 14 16 Q [m3/h]
P1 [kW]
0,3
1500
1350
0,2
1200
AE-32/4 AEP-32/4 AE-33/4 AEP-33/4
1050
0,1
900
750
600
OPSC-752 N13 0,2 2,1 20 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]

G 1 1/4 600 - 1800 r/min Ø 135 mm 1~ 230 V

H [m]
9
2 m/s 4 m/s 6 m/s
60 HZ
AE_-32/4 AE_-33/4
8
55 Hz BEP
7
6 50 Hz
5 45 Hz
4 40 Hz
3 35 Hz
30 Hz
2
25 Hz
1 20 Hz
0
0 1 2 3 4 5 6 Q [l/s]
3
0 5 10 15 20 Q [m3/h]
P1 [kW]
0,6
1800
0,5
1650
0,4
1500
AE-32/4 AEP-32/4 AE-33/4 AEP-33/4 0,3 1350
1200
0,2
1050
900
0,1 750
600
KHSC-100 A2 N13 0,37 3,6 35 0 1 2 3 4 5 6 Q [l/s]
L-40A/4 SC
DN 40 600 - 1500 r/min Ø 130 mm 1~ 230 V

H [m]
6
1 m/s 2 m/s 3 m/s
50 Hz
45 Hz
4 BEP
40 Hz
3
35 Hz
30 Hz
2
25 Hz
1 20 Hz
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]
0 2 4 6 8 10 12 14 16 Q [m3/h]
P1 [kW]
0,3
1500
1350
0,2
1200
1050
0,1
900
750
600
Motor P 2N [kW] I N [A] (1x230V) [kg]
0,0
OPSC-752 N13 0,2 2,1 24 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]

L-40A/4 SC
DN 40 600 - 1800 r/min Ø 135 mm 1~ 230 V

H [m]
9
1 m/s 2 m/s 3 m/s 4 m/s
60 HZ
8
55 Hz BEP
7
6 50 Hz
5 45 Hz
4 40 Hz
3 35 Hz
30 Hz
2
25 Hz
3 1 20 Hz
0
0 1 2 3 4 5 6 Q [l/s]
0 5 10 15 20 Q [m3/h]
P1 [kW]
0,6
1800
0,5
1650
0,4
1500
0,3 1350
1200
0,2
1050
900
0,1 750
600
KHSC-100 A2 N13 0,37 3,6 40 0 1 2 3 4 5 6 Q [l/s]
L-50A/4 SC LP-50A/4 SC
DN 50 600 - 1500 r/min Ø 120 mm 1~ 230 V

H [m]
5
1 m/s 2 m/s
50 Hz
45 Hz
BEP
3 40 Hz
35 Hz
2
30 Hz
25 Hz
1
20 Hz
0
0 1 2 3 4 5 6 Q [l/s]
0 5 10 15 20 Q [m3/h]
P1 [kW]
0,3
1500
1350
0,2
1200
1050
0,1 900
750
600

0 1 2 3 4 5 6 Q [l/s]
OPSC-752 F15 0,2 2,1 26

L-50A/4 SC LP-50A/4 SC
DN 50 600 - 1800 r/min Ø 135 mm 1~ 230 V

H [m]
9
60 HZ 1 m/s 2 m/s 3 m/s 4 m/s
55 Hz
7
50 Hz
6
BEP
5 45 Hz
4 40 Hz
35 Hz
3
30 Hz
2
25 Hz
3
20 Hz
1
0
0 1 2 3 4 5 6 7 8 9 Q [l/s]
0 5 10 15 20 25 30 Q [m3/h]
P1 [kW]
0,8
1800
0,6
1650
1500
0,4
1350
1200
0,2 1050
900
750
600
KHSC-100 A2 F15 0,55 4,6 42 0 1 2 3 4 5 6 7 8 9 Q [l/s]
L-65A/4 SC LH-65A/4 SC
DN 65 600 - 1500 r/min Ø 148 mm 1~ 230 V

H [m]
8
1 m/s 2 m/s
50 Hz
7
6
45 Hz
BEP
5
40 Hz
4
35 Hz
3
30 Hz
2 25 Hz
20 Hz
1
0
0 1 2 3 4 5 6 7 8 9 Q [l/s]
0 5 10 15 20 25 30 Q [m3/h]
P1 [kW]
0,8
1500
0,6
1350
0,4 1200
1050
0,2 900
750
600
Motor P 2N [kW] I N [A] [kg] 0,0
0 1 2 3 4 5 6 7 8 9 Q [l/s]
KHSC-100 A2 F19 0,55 4,6 47

DN 65 600 - 1500 r/min Ø 164 mm 1~ 230 V

H [m]
10
1 m/s 2 m/s
50 Hz
8
BEP
45 Hz
6
40 Hz
35 Hz
4
30 Hz
25 Hz
2
3
20 Hz
0
0 1 2 3 4 5 6 7 8 9 10 Q [l/s]
0 5 10 15 20 25 30 35 Q [m3/h]
P1 [kW]
1,2
1500
0,9
1350
0,6
1200
1050
0,3 900
750
Motor P 2N [kW] I N [A] (1x230V) [kg] 600
0,0
KHSC-100 B2 F19 0,75 6,1 47 0 1 2 3 4 5 6 7 8 9 10 Q [l/s]
DN 80 600 - 1500 r/min Ø 147 mm 1~ 230 V

H [m]
7
0,5 m/s 1 m/s
50 Hz
6
45 Hz
5
40 Hz
4
BEP
35 Hz
3
30 Hz
2
25 Hz
20 Hz
1
0
0 2 4 6 8 10 12 14 Q [l/s]
0 5 10 15 20 25 30 35 40 45 50 Q [m3/h]
P1 [kW]
0,8
1500
0,6
1350
0,4
1200
1050
0,2 900
750
600

0 2 4 6 8 10 12 14 Q [l/s]
KHSC-100 A2 F19 0,55 4,6 48

DN 80 600 - 1500 r/min Ø 158 mm 1~ 230 V

H [m]
8
1 m/s 2 m/s 3 m/s
50 Hz
45 Hz
6
BEP
5 40 Hz
4 35 Hz
3
30 Hz
2 25 Hz
20 Hz
3
1
0
0 2 4 6 8 10 12 14 16 Q [l/s]
0 10 20 30 40 50 Q [m3/h]
P1 [kW]
1,0
1500
0,8
1350
0,6
1200
0,4
1050
900
0,2 750
600
0 2 4 6 8 10 12 14 16 Q [l/s]
KHSC-100 B2 F19 0,75 6,1 48
AL-1102/4 SC ALH-1102/4 SC ALP-1102/4 SC ALS-1102/4 SC
DN 100 600 - 1500 r/min Ø 142 mm 1~ 230 V

H [m]
6
1 m/s 2 m/s
50 Hz
5
45 Hz BEP
4
40 Hz
35 Hz
2 30 Hz
25 Hz
1
20 Hz
0
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
0 10 20 30 40 50 60 70 Q [m3/h]
P1 [kW]
1,0
0,8
1500
0,6 1350
0,4 1200
1050
0,2 900
750
600
KHSC-100 B2 F19 0,75 6,1 59 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]

AT_-1102/2 60Hz DN100 3600 r/min
min150
645
G 1/4 G 1/4
107
110
150
24 Ø100 8xØ19
3xM12, Depth 16 140 Ø180
450
670
170
210
90
3xØ14
4xØ16
155
170
210
kW A kg H
OKN-132 E1 F19 7.5 (9) 15.0 202 495
OKN-132 C1 F19 5.5 (6.6) 11.0 186 495
OKN-112 E1 F19 4.0 (4.8) 8.2 138 430
Nominal power inside the parenthesis available when motor is wound according to the supply voltage and frequency.
Pump efficiency Total efficiency

0.7 Ø144 0.6
0.6 0.5
Ø144
0.5
0.4
0.4
Ø128 0.3 Ø128
0.3
0.2
0.2
0.1 0.1
0 0
0 5 10 15 20 25 30 35 40 l/s 0 5 10 15 20 25 30 35 40 l/s
LOREM IPSUM JE ZULT
MAAR 60 HZ
m Head
35
Ø144
30
25
NPSH
Ø138
m
4
20 8
14
Ø
15 6
Ø133
10 4
Ø128
5 2
0
0 5 10 15 20 25 30 35 40 l/s
Flow
3
0 20 40 60 80 100 120 140 m/h
kW Shaft power P2
10 Ø144
9 Ø138
8 Ø133
7
6 Ø128
5
4
3
2
1
0
0 5 10 15 20
INLINE PUMPS WITH FIXED-SPEED MOTOR, 3x400V
25 30 35 40 l/s
kW
11
Ø144 Ø138
AE-series, threaded G3/4 - G11/4
10
9
L_-, AL_- and AKN-series, flanged DN32 - DN300
Ø133
8 Ø128
7
6
5
4
3
2
1
0
0 5 10 15 20 25 30 35 40 l/s www.kolmeks.com
INLINE PUMPS - AE, L, AL and AKN
General technical data

AE series pumps:
• Centrifugal pumps equipped with thread connections.
• Pumps can be used as circulation, pressure boosting and transfer pumps for clean liquids.
L, AL and AKN series pumps:

• Inline centrifugal pumps equipped with flange connections.
Applications:
• Grey cast iron (L, AL and AKN) pumps can be used as circulation, pressure boosting and transfer pumps for clean
liquids.
• Nodular cast iron (LH, ALH and AKNH) pumps can be used in power plants and as pressure boosting pumps for
primary district heating.
• Bronze (LP and ALP) pumps can be used as domestic hot water, circulation, pressure boosting and transfer pumps
for clean oxygen-rich and some slightly aggressive liquids.
• Stainless steel AISI316 (LS and ALS) pumps can be used as circulation, pressure boosting and transfer pumps for
acid and alkaline liquids.
Note! The suitability of materials and seals for the liquid to be pumped must always be confirmed when selecting a
4 pump.
Quick

Selection Chart AE-, L- and AKN-series, 50Hz

m




 

 
 
 


 
 
  

 
 
  
 
   

 

 

 


  

 
  
 



 
   

 





            

            

Quick Selection Chart L-, AL- and AKN-series 4- ja 6-poles, 60Hz



m


 






 

 
   

   


 
  
   
   


 


 4

            

            
Quick Selection Chart L-, AL- and AKN-series 2-poles, 60Hz



m





 


 

 

 
 




 

           

            

Standard materials and fields of application AE_- / L_- / AL_- / AKN_-pumps

Nodular Shaft seal,
Connection Grey cast iron Bronze Stainless steel Stainless steel O-ring O-ring Motor
cast iron PN10
CuSn10Zn2, SS 2378-254 Ø [mm],
G or DN EN-GJL-200, PN10 EN-GJS-400, PN16 AISI 316, PN 16 Size [mm] Material [kW]
PN10 SMO materials
G 3/4 AE-20/4 no no no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,03-0,08
-”- AE-20/2 no no no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,25-1,1
G1 AE-25/4, -26/4 no AEP-25/4, -26/4 no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,05-0,08
-”- AE-25/2, -26/2 no AEP-25/2, -26/2 no no 12, carbon/SiC Viton 123 X 2,5 NBR 0,25-1,1
G 1 1/4 AE-32/4, -33/4 no AEP-32/4, -33/4 no no 12, carbon/SiC Viton 145 X 2,5 NBR 0,2-0,37
-”- AE-32/2, -33/2 no AEP-32/2, -33/2 no no 12, carbon/SiC Viton 145 X 2,5 NBR 1,1-1,5
L-32/4 no no no no 12, carbon/SiC EPDM 100 X 2,5 NBR 0,05-0,2
DN 32 L-32/2 no no no no 12, carbon/SiC EPDM 100 X 2,5 NBR 0,25-1,1
no no no ALS-1032/4 no 12, carbon/SiC EPDM 145 X 2,5 NBR 0,2-0,37
DN 40 no no no ALS-1040/2 no 12, carbon/SiC EPDM 100 X 2,5 NBR 0,25-1,1
L-40A/4 no no no no 12, carbon/SiC EPDM 145 X 2,5 NBR 0,2-0,37
L-40A/2 no no no no 12, carbon/SiC EPDM 145 X 2,5 NBR 1,1-1,5
L-50A/4 no LP-50A/4 no no 12, carbon/SiC EPDM 150 X 3 NBR 0,2-0,55
L-50B/2 no LP-50B/2 no no 12, carbon/SiC EPDM 150 X 3 NBR 1,1
no LH-50D/4 no no no 18, carbon/SiC EPDM 150 X3 NBR 0,37-0,55
DN 50 L-50D/2 LH-50D/2 LP-50D/2 no no 18, carbon/SiC EPDM 150 X 3 NBR 1,5-4
L-50C/2 LH-50C/2 LP-50C/2 no no 18, carbon/SiC EPDM 150 X 3 NBR 1,5-4
L-50S/4 LH-50S/4 no no no 28, carbon/SiC EPDM 265 X 4 EPDM 1,1-5,5
4
L-65A/4 LH-65A/4 no no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,2-3
no no no LS-65B/4 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,2-3
DN 65 L-65B/2 LH-65B/2 no LS-65B/2 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 1,5-7,5
no no ALP-1066/4 no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,37-3
no no ALP-1065/2 no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 1,5-7,5
L-80A/4 LH-80A/4 no no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,37-3
L-80A/2 LH-80A/2 no no no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 2,2-7,5
DN 80 no no no ALS-1081/4 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,37-3
no no no ALS-1081/2 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 2,2-7,5
AL-1102/4 ALH-1102/4 ALP-1102/4 ALS-1102/4 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 0,55-3
AL-1102/2 ALH-1102/2 ALP-1102/2 ALS-1102/2 no 18, carbon/SiC EPDM 179,3 X 5,7 EPDM 4-7,5
AKN-100/4 AKNH-100/4 no no no 25, carbon/SiC EPDM 240 X 3 NBR 1,5-3
AKN-100/2 AKNH-100/2 no no no 25, carbon/SiC EPDM 240 X 3 NBR 7,5-22
DN 100
AL-1106/4 ALH-1106/4 no ALS-1106/4 no 32, carbon/SiC EPDM 309/295X1 gasket 3-18,5
L-100S/4 LH-100S/4 LP-100S/4 no no 32, carbon/SiC EPDM 315 x 6,3 EPDM 3-22
L-100S/2 LH-100S/2 LP-100S/2 no no 32, carbon/SiC EPDM 315 x 6,3 EPDM 15-37
L-100S/2 LH-100S/2 LP-100S/2 no no 40, carbon/SiC EPDM 315 x 6,3 EPDM 45
AKN-127/4 AKNH-127/4 no no no 32, carbon/SiC EPDM 240 X 3 NBR 4-11
AKN-127/2 AKNH-127/2 no no no 32, carbon/SiC EPDM 240 X 3 NBR 11-22
AL-1129/4 ALH-1129/4 no ALS-1129/4 ALM-1129/4 32, carbon/SiC EPDM 309/295X1 gasket 3-22
DN 125 AL-1129/2 ALH-1129/2 no ALS-1129/2 ALM-1129/2 32, carbon/SiC EPDM 309/295X1 gasket 30-37
no no ALP-1128/4 no no 32, carbon/SiC EPDM 309/295X1 gasket 3-22
no no ALP-1128/2 no no 32, carbon/SiC EPDM 309/295X1 gasket 30-37
L-125S/4 LH-125S/4 no LS-125S/4 no 40, carbon/SiC EPDM 405 X 7 EPDM 18,5-37
L-125S/4 LH-125S/4 no LS-125S/4 no 50, carbon/SiC EPDM 405 X 7 EPDM 45-55
no no ALP-1153/6 no no 32, carbon/SiC EPDM 309/295X1 gasket 5,5-11
DN 150 no no ALP-1153/4 no no 32, carbon/SiC EPDM 309/295X1 gasket 4-30
AL-1154/6 ALH-1154/6 no ALS-1154/6 ALM-1154/6 32, carbon/SiC EPDM 309/295X1 gasket 5,5-11
AL-1154/4 ALH-1154/4 no ALS-1154/4 ALM-1154/4 32, carbon/SiC EPDM 309/295X1 gasket 4-30
AL-1202/6 ALH-1202/6 ALP-1202/6 ALS-1202/6 ALM-1202/6 32, carbon/SiC EPDM 315 x 6,3 EPDM 4-11
AL-1202/6 ALH-1202/6 ALP-1202/6 ALS-1202/6 ALM-1202/6 40, carbon/SiC EPDM 315 x 6,3 EPDM 15-18,5
DN 200 AL-1202/4 ALH-1202/4 ALP-1202/4 ALS-1202/4 ALM-1202/4 32, carbon/SiC EPDM 315 x 6,3 EPDM 15-18,5
AL-1202/4 ALH-1202/4 ALP-1202/4 ALS-1202/4 ALM-1202/4 40, carbon/SiC EPDM 315 x 6,3 EPDM 22-37
AL-1202/4 ALH-1202/4 ALP-1202/4 ALS-1202/4 ALM-1202/4 50, carbon/SiC EPDM 315 x 6,3 EPDM 45
AL-1250/6 ALH-1250/6 ALP-1250/6 ALS-1250/6 no 40, carbon/SiC EPDM 405 X 7 EPDM 15-22
AL-1250/6 ALH-1250/6 ALP-1250/6 ALS-1250/6 no 50, carbon/SiC EPDM 405 X 7 EPDM 30
DN 250 AL-1250/4 ALH-1250/4 ALP-1250/4 ALS-1250/4 no 40, carbon/SiC EPDM 405 X 7 EPDM 37
DN 300 AL-1300/4 ALH-1300/4 no ALS-1300/4 no 75, carbon/ceramic. EPDM 475 X 8 EPDM 110-160

Series Pressure class / Housing material Sealing Impeller Pump Difference in materials
temperature [°C ] Name Marking flange shaft
AE / L / PN10 / -15...+120 grey cast iron EN-GJL-200 EN-GJL-200 EN-GJL-200 AISI329 AE / L_-32 impeller Noryl GFN2
AL / AKN AL_-1300 impeller EN-GJS-400
LH / PN16 / -15...+180 nodular cast EN-GJS-400 EN-GJS-400 EN-GJL-200 AISI329 ALH-1300 impeller EN-GJS-400
ALH / AKNH (depending on iron
seal constrution)
Bronze impeller available to
AEP / LP / ALP PN10 / -15...+120 bronze CuSn10Zn2 CuSn10Zn2 CuSn10Zn2 AISI329 all pumps

LS / ALS PN16 / -15...+180 stainless steel AISI316 AISI316 AISI316 AISI329 On special request also
(depending on seal SS2324 (AISI 329) ja SS2378 ”SMO”
construction) (LM / ALM-pumps)
Standard shaft material is Stainless steel AISI 329. In LM / ALM-pumps shaft material is Stainless steel SMO, SS2378.
Structure
Pump
AE, L and AL series pumps are monoblock centrifugal pumps equipped with a dry asynchronous motor. The pump impeller
is installed directly onto the shaft of the electric motor (no separate couplings).
Electric motor
The electric motor of AE, L and AL series pump is a Kolmeks asynchronous designed for pump use. The electric motor is highly efficient
4
and has low noise levels. The electric motor is suitable for frequency converter use.
Standard voltages: 400/230 V, 50 Hz 0,03–3 kW

690/400 V, 50 Hz 4–160 kW
Enclosure classes: IP 54 0,03–3 kW 1000, 1500r/min

0,25–4 kW 3000r/min
IP55 4–160 kW 1000, 1500r/min
5,5–55 kW 3000r/min
Insulation class: F
Duty type: S1 (continuous duty)
Ambient temperature: max. +45°C
NOTE! Kolmeks electric motors are available with other enclosure classes and voltages by request.
Connections
The AE series pump is equipped with G thread connections according to ISO 228/1.
The L, AL and AKN series pump is equipped with flanged connections (PN10 or PN16) according to ISO 7005 Flanges to
ANSI/JIS standards are available on request.
Seals
The shaft seal of an AE series pump is a single mechanical seal. The pump housing seal is an O-ring
The standard shaft seal on L, AL and AKN series pumps is a single mechanical seal. The pump housing seal is an O-ring or
gasket.
By request, there are several seal materials and structure alternatives available depending on the properties and tempera-
ture of the liquid.
Standard surface treatment

The pumps are painted according to Standard SFS-EN ISO 12944-5, AY100/1-FeSa2½. The colour is RAL3020. Epoxy surface
treatment and colour alternatives are available by request.

Rating plate Accessories:

X = Pump without baseplate
P = Single phase motor
N = Seal kit no.7
T = External shaft seal
H = Recirculation
Material: KT = Double shaft seal
P = Bronze Sn = Non-standard shaft seal
H = Nodular Cast Iron Kn = Non-standard surface treatment Non-standard material of impeller:
S = Stainless steel Ln = Motor thermal protectors PM = Bronze
En = Other difference (e.g. EXE) SS = Stainless steel AISI316
Vn = Special voltage
Pump type Motor code
Serial number, Pressure class and impeller diameter
Duty point and max. Electrical power at duty point
temperature of liquid (if required)
Minimum efficiency index (MEI)
Motor type Continuous duty
Nominal voltages and Nominal power and rotation speed
currents Enclosure and insulation class
Bearing types, Efficiency of electric motor
4 Manufacturer, Country
and CE marking
Seal structure alternatives

Standard structure
- Single mechanical seal
- Max. operating temperature +120°C.
The standard-constructed shaft seal can also be used for water-glycol

mixtures and most other indirect refrigeration systems. The recommended
glycol is propylene glycol and the concentration can be up to 50%. Most often,
a concentration of 30–40% is adequate.
Internal flushing
- Recirculation from the discharge flange of the pump to the seal chamber
which flushes the seal
- Max. +150°C water
- Available for flange sizes DN50 … DN300. . This is indicated with an
additional marking ‘H’ in the pump type e.g. LS-65B/4H.
   
External flushing
- Plugged pipe to the seal chamber using which, it is possible to flush the seal 
with external pressure if required

- Available for flange sizes DN 50–300 pumps
- Crystallising and accumulative liquids 
 
 
 




External seal
- Externally-mounted single mechanical Teflon bellows
- Available for flange sizes DN 65–300 ALS pumps
- Extremely corrosive liquids, e.g. sulphuric acid
- Marking ‘T’ in the pump type e.g. ALS-1065/4T
- NOTE! Maximum working pressure 10 bar
Double mechanical seal system (cartridge)

- Two opposing seals with sealing liquid brought from outside (circulation). The
pressure of the liquid can be lower or higher than that of the liquid being pumped
- Available for flange sizes DN 65–300 pumps
- Max. operating temperature +180°C for water
- Requires a separate seal water monitoring unit (available from Kolmeks)
- Marking ‘KT’ in the pump type e.g. ALS-1154/4KT
- Hot, crystallising and accumulative liquids
Installation
Ensure the following when installing the pump:
- Enough room for service and inspection
- Possibility to use lifting and transfer devices if required
4
- Shut-off valves on both sides of the pump, allowing the position of the motor unit and the electrical terminal connection
box to be changed by removing the motor unit from the pump housing and by installing it in the required position ---(not
applicable when using internal seal flushing, marking ‘H’ which is standard in the LH/ALH series)
Kolmeks inline pumps are suitable

for both vertical and horizontal pipe
mounted positions. Small pumps are
usually installed without a base in a
vertical or horizontal position. Large
pumps are installed with the base in a
vertical position.
When selecting a method of instal-

lation, please consider at least the
following:
• Enough room for installation and Size Power
service
• Piping strength, rigidity and sup- DN 15 ... 50 max. 2,2 kW
port
• Vibration and noise level require- DN 65 4 kW
ments DN 80 4 kW
• Pump installability DN 100 7,5 kW
• Pump serviceability DN 125 7,5 kW
o number of service personnel
and availability of lifting equip-
ment
o pump weight
Recommended general limits without the base:

Large pumps are fastened by their foot onto a freely moving concrete plinth,
which is separated from the floor.by a 20-mm thick rubber or cork mat for ex-
ample. The weight of the concrete base must be about 1.5 times the weight of
the pump.

Pump service
Parts for AE-pumps

1 Electric motor
2 Pump housing
3 Impeller
5 Sealing flange
24 Nut / Screw
25 Washer
26 Key
40 Mechanical seal
43 V-ring
50 O-ring / gasket
60 Nut / Screw
80 Pipe joint ( AE-26, AE-33)
Parts for L_-, AL_-, ja AKN- pumps

1 Electric motor
2 Pump housing
3 Impeller
5 Sealing flange
8 Base plate (not always)
24 Nut / Screw
25 Washer
26 Key
40 Mechanical seal
43 V-ring (not always)
50 O-ring / gasket
60 Nut / screw
67 Screw
80 Pipe joint (ALH-serie)
81 Pipe joint (ALH-serie)
86 Pipe (ALH-serie)

Motor unit
The pump motor unit is a new stand-by operation unit which includes:
1) Motor
2) Sealing flange
3) Impeller
4) Seals
If a motor malfunction or a seal leak occurs, replacing the motor unit is simple
and quick and does not require long periods of stoppage. No procedures need to
be carried out on the piping, because there is no need to detach the pump hou-
sing.
Shaft seal
If a seal leak occurs in a new pump, e.g. during commissioning , it is possible to replace only the shaft seal with a new one.
Parts of single mechanical shaft seal

1 Rotating ring
2 Stationary ring
3
4
Body/bellows
Spring
4
5 O-ring

Reading curves and selecting a pump

AL-1250/4 ALH-1250/4 ALP-1250/4 ALS-1250/4 ALM-1250/4
AL_-1250/4 DN250
Motor 400V P 2N [kW] I N [A] [kg] H [mm]
KZ-224 J2 F41 37 67,0 580 880
Selecting a fixed speed pump from 50 KZ-225 K2 F42 45 81,1 610 900
50Hz
Hz pump curve (curves on the left) KZ-256 J2 F42
KZ-287 J2 F43
55
75
98,7
133,9
690
850
950
1020
E.g. duty point: flow =160 l/s, head = KZ-288 K2 F43 90 158,5 920 1070
KZR-314 H2 F43 110 193,2 1210 1330
35 m, liquid: water +20°C. Motor 380-400V(460-480V) P 2N [kW] I N [A] [kg] H [mm]
KZ-225 K2 F42 45 (54) 84,0 (83,8) 610 900
KZ-256 J2 F42 55 (66) 102,1 (100,9) 690 950
60Hz
1. Use the quick selection chart at the KZ-287 J2 F43
KZ-288 K2 F43
75 (90)
90 (105)
138,6 (139,0)
156,2 (159,6)
850
920
1020
1070
beginning of the catalogue or browse KZR-314 H2 F43 110 (132) 199,9 (198,2) 1210 1330
through the product catalogue in order

to find a pump of the correct size range
such that the required flow 160 l/s is at kW
the best efficiency point (ɳ = 80%).
75
2. Select the impeller size [Ø= mm] 50 Hz 1500r/min DN 250 60 Hz 1800r/min DN 250
from the QH curve such that a 60
H [m] NPSH [m]
22 70
H [m] NPSH [m]
28
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
vertical line is drawn at the point of 55
4 m/s 5 m/s
20
60 24
160 l/s flow through all curves and, 50
45
NPSH 18
Ø395
16 50 NPSH 20
equivalently, a horizontal line at the 40
14
Ø380
4 point of 35m head. 35 40 16

12
30
10
25 30 12
8
20
3. Find the impeller size at the 15
6 20 8
intersection= 380 mm. Note! If the 10 4

10 4
5 2
intersection falls between two impeller 0 0 0 0
100 120 140 160 180 200 220 240 260 Q [l/s] 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
sizes, the impeller diameter is selected 0
0
20
100
40 60
200
80
300 400 500 600 700 800 900 Q [m3/h]
0
0
20 40 60
200 400 600 800
Q [m3/h]
1000
halfway between the two sizes. 100

P2 [kW]
Ø415 140
P2 [kW]
Ø380
80 120
100
60 80
4. Read the nominal shaft power of the 40
Ø300
60
40
Ø300
20 20
motor from the section in which the 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s]
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
QH curve is. 120
P1 [kW] P1 [kW]
140 Ø380
In this example, the motor nominal 100
80
Ø415 120
100
shaft power is P2N = 75 kW. 60

40 Ø300
80
60 Ø300
40
According to the shaft power P2, P2 20
0
20
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
= 71 kW, the motor nominal power η [%] η [%]
90 90
becomes P2N = 75 kW (the closest 80
70
80
70 Ø380
Ø395
highest motor nominal power). 60
50
Ø300
60
50
Ø300
40 40
30 30
5. Check the nominal current of the 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
electric motor from the column on the right-hand side of the nominal power column in the table, IN = 133.9 A. Select an
overload protection for the motor according to nominal current.
6. Read the pump weight from the same table [kg] = 850 kg.
7. For energy calculation, read the electrical power of the device = P1 [kW], from the P1 curve with a required flow of Q = 160
l/s and at the point of the selected impeller size, Ø = 380 mm.
In this example, the device electrical power is P1= 74 kW.
8. Energy costs = Electrical power P1 [kW] x energy price [€/ kWh] x operating time [h].
Characteristic curves apply to +20°C water.
Note! Please contact Kolmeks for additional information on the following issues!
1. When pumping liquids whose viscosity differs from that of water, the effect of viscosity must be considered in
pump selection.
2. Liquid density is directly proportional to the power requirement. The sufficiency of motor power must be checked
for liquids denser than water.

Selecting an optimal pump for frequency converter operation from a

60Hz curve
CORRECTLY-SIZED OVERSIZED
PUMP PUMP
AL-1154/4 ALH-1154/4 ALS-1154/4 ALM-1154/4 AL-1202/4 ALH-1202/4 ALP-1202/4 ALS-1202/4 ALM-1202/4
Motor 400V P 2N [kW] I N [A] [kg] H [mm] Motor 400V P 2N [kW] I N [A] [kg] H [mm]
KH-132 C2 F31 4 8,13 177 500 KZ-165 G2 F31 15 28,1 325 720
KZ-186 G2 BF31 18,5 34,4 365 780
50Hz
KH-132 E2 F31 5,5 10,95 184 500
50Hz
KH-133 G2 F31 7,5 14,88 196 550 KZ-186 K2 BF32 22 40,3 380 780
KZ-165 F2 F31 11 20,75 250 660 KZ-205 K2 F32 30 55,2 435 830
KZ-165 G2 F31 15 28,10 255 660 KZ-224 J2 F32 37 67,0 485 840
KZ-186 G2 BF31 18,5 34,40 295 720 Motor 380-400V(460-480V) P 2N [kW] I N [A] [kg] H [mm]
Motor 380-400V(460-480V) P 2N [kW] I N [A] [kg] H [mm] KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 365 780
KZ-186 K2 BF32 22 (26) 41,60 (41,00) 380 780
60Hz
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 177 500
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 184 500 KZ-205 K2 F32 30 (36) 57,60 (57,10) 435 830
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 196 550 KZ-224 J2 F32 37 (44) 69,50 (68,60) 485 840
60Hz
KZ-165 F2 F31 11 (13) 21,35 (21,35) 250 660 KZ-225 K2 F33 45 (54) 84,00 (83,80) 510 880
KZ-165 G2 F31 15 (18) 29,10 (28,75) 255 660
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 295 720
KZ-186 K2 BF31 22 (26) 41,60 (41,00) 310 720
KZ-205 K2 F31 30 (30) 57,60 (57,10) 370 780
50 Hz 1500r/min DN 150 60 Hz 1800r/min DN 150 50 Hz 1500r/min DN 200 60 Hz 1800r/min DN 200

H [m] NPSH [m] H [m] NPSH [m] H [m] NPSH [m] H [m] NPSH [m]
30 12 45 18
30 12 40 16 1 m/s 2 m/s 3 m/s 4 m/s 1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
1 m/s 2 m/s 3 m/s 4 m/s 1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
NPSH
NPSH Ø315 40 16
35 NPSH14 25 10
25 Ø292 10 Ø292 35 NPSH 14
30 12 Ø305
20 8 20 8 30 12
25 10
25 10
15 6 20 8 15 6
20 8
4
15 6
10 4 10 4 15 6
10 4 10 4
5 2 5 2
5 2 5 2
0 0 0 0 0 0 0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s] 0 20 40 60 80 100 120 140 160 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
0 50 100 150 200 250 300 Q [m3/h] 0 50 100 150 200 250 300 350 Q [m3/h] 0 100 200 300 400 500 Q [m 3/h] 0 100 200 300 400 500 600 700 Q [m3/h]
P2 [kW] P2 [kW] P2 [kW] P2 [kW]
20 30 40 60
Ø292 Ø315 Ø315 Ø305
Ø292 25 50
15 30
20 40
10 15 20 30
10 Ø242 20 Ø242
5 Ø204 10
Ø204 5 10
0 0 0 Q [l/s] 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s] 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
P1 [kW] P1 [kW] P1 [kW] P1 [kW]
20 35 40 70
Ø292 Ø292 Ø315
30 60 Ø315
15 25 30 50
20 20 40
10 15 30
Ø242 Ø242
5 10 10 20
Ø204 Ø204 10
5
0 0 0 Q [l/s] 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s] 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
η [%] η [%] η [%] η [%]
80 80 80 80 Ø315
70 70 70 Ø315 70
60 Ø292 60 Ø292 60 60
50 50 Ø242 50 Ø242
50
40 Ø204 40 Ø204 40 40
30 30 30 30
20 20 20 Q [l/s] 20
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s] 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
E.g. duty point: flow = 60 l/s, head = 25 m, pumped liquid being water +20°C.
www.kolmeks.fi Subject to change without prior notice 05.09.2012 www.kolmeks.fi Subject to change without prior notice 13.09.2012
1. Use the quick selection chart at the beginning of the catalogue or check the datasheets in the product catalogue to
find a pump in the correct size range such that the required flow is in the best efficiency point. The AL-1154/4 pump is
selected because its efficiency is the best in the required duty point ɳ = 75%.
2. The duty point is outside the operating range of the AL-1154/4 50 Hz pump.
3. Usually when selecting the pump from the 50 Hz curve to the required duty point (Q = 60 l/s, 25 m), the next largest
pump is selected.
In the above example, we choose AL-1202/4, Ø300mm, P2N = 30 kW, ɳ = 67%. This is an oversized pump whose best
flow range is within 100–120 l/s, where its efficiency is the highest ɳ = 80 %.
4. Select the pump AL-1154/4 from the 60 Hz curve, whereby the impeller is Ø274mm.The nominal motor shaft power P2N
is selected according to the shaft power curve P2.
Shaft power P2 = 21 kW and the next higher nominal power is P2N = 22 kW.
In this example, we choose AL-1154/4, Ø274mm, P2N = 22 kW, ɳ = 75%.
QH curves are available for 50 Hz and 60 Hz on the same datasheet in order to facilitate the customer’s selection of the
most energy efficient pump for frequency converter operation.
How does careful pump selection benefit the customer?

1. The pump saves energy, because it has been selected from the range of the best efficiency.
2. The total purchase cost is lower, because the pump, the electric motor and the frequency converter are one size smaller.
3. The pumps are designed to operate at the best efficiency where they run with low noise and vibration and have a long
service life.
4. A smaller pump saves energy in partial flows, because its efficiency is better for the entire operating range.

NPSH and cavitation

NPSHre < NPSHav The NPSHavvalue of a system refers to the actual difference between inlet
pressure (in the suction flange) and vapour pressure of the liquid being
NPSHre < p + h - hsuction - ph pumped. The NPSHre value required of the pump must be smaller than the
NPSHavvalue in order to prevent cavitation from occurring. A safety margin
of 0.5 m must be added to the measurement value.
NPSHre < psuction - ph
NPSHav = difference between ph[m]

available inlet pressure (in sucti-
on flange) and vapour pressure of
liquid being pumped
NPSHre = NPSH value required by
the pump
p = Absolute air pressure
ph = Absolute liquid vapour pressu-
re at the operating temperature
h = Liquid geodetic suction head
4 hsuction = Pressure losses in suction
pipes
psuction = Absolute suction pressure
T[oC]
Vapour pressure (water)
At normal air pressure levels (10 m water column, 1,013 mbar = 760 mm Hg), clean water boils at 100°C. It can be seen from
the curve that water boils at 60°C when the absolute pressure is 2 m wc (i.e. 8 m wc below atmospheric pressure). The boi-
ling point of water at less than 40°C can be achieved at a very low pressure. Vice versa, at the top of Mount Everest, where
air pressure is about 0.6 bar (6 m), water boils at +85°C.
Example:
Open tank (p = air pressure = 10 m) where the water temperature is + 90°C (ph = 7 m), suction pipe losses 1 m
and liquid suction head flange +2 m. The pump duty point 20 l/s, 7.8 m.
Is the selected pump suitable for the use in question? An example of calculation:
Pump type: AL_-1102/4/Ø188 2,2 kW Liquid level

p = air pressure
NPSHre < p + h - hsuction - ph
NPSHre < 10 m + 2 m - 1 m - 7 m
NPSHre < 4 m
h
When observing the safety margin water, + 90°C psuction
0.5 m, the NPSHre value of the pump
must be smaller than 3.5 m in order
to prevent the pump from cavitating.
NPSHre of pump AL_-1102/4/Ø188 =
2.7 m, whereby it will not cavitate.
hsuction

AE-20/4

OP-732 N12 0,03 0,18 10 175
50Hz
OP-732 B N12 0,05 0,21 10 175
OP-742 N12 0,08 0,28 10,5 175
Motor 380-400V(460-480V) P 2N [kW] I N [A] [kg] H [mm]
60Hz
OP-732 B N12 0,05 (0,06) 0,22 (0,22) 10 175
OP-742 N12 0,08 (0,09) 0,28 (0,28) 10,5 175
50 Hz 1500r/min G 3/4 60 Hz 1800r/min G 3/4

4
H [m] NPSH [m] H [m] NPSH [m]
6 12 8 8
7 7
5 10
6 6
4 8
NPSH 5 5
Ø120 NPSH
Ø120
3 6 4 4
3 3
2 4
2 2
1 2
1 1
0 0 0 0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s] 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
Q [m3/h] Q [m3/h]
0 1 2 3 4 5 0 1 2 3 4 5
P2 [kW] P2 [kW]
0,10 0,10 Ø125
Ø125
0,05 0,05
Ø70
Ø70
0,00 Q [l/s] 0,00
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
P1 [kW] P1 [kW]
0,15 0,20
Ø125
Ø125
0,10 0,15
0,10
0,05 Ø70
Ø70 0,05
0,00 Q [l/s] 0,00
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
η [%] η [%]
60 60
Ø110
50 Ø125 50
40 40
Ø70 Ø70
30 30
20 20
10 10
0 Q [l/s] 0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]

AE-20/2
50Hz
OP-741 N12 0,25 0,7 10,5 215
OKN-841 D N12 0,65 1,75 14,5 260
OP-741 N12 0,25 (0,3) 0,7 (0,7) 10,5 215
60Hz
OKN-841 D N12 0,65 (0,75) 1,6 (1,6) 14,5 260
KH-871 N12 1,1 (1,3) 2,35 (2,50) 20 295
4
50 Hz 3000r/min G 3/4 60 Hz 3600r/min G 3/4
20 8 30 12
NPSH 25 10
Ø125
15 6 NPSH
Ø125
20 8
10 4 15 6
10 4
5 2
5 2
0 0 0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s]
0 2 4 6 8 10 Q [m3/h] 0 2 4 6 8 10 12 Q [m3/h]
P2 [kW] P2 [kW]
0,8 1,2
Ø125
Ø125
0,6 0,9
0,4 0,6
0,2 0,3
Ø70 Ø70
0,0 0,0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s]
P1 [kW] P1 [kW]
1,0 1,6
Ø125 Ø125
0,8 1,2
0,6
0,8
0,4
0,2 0,4
Ø70
Ø70
0,0 0,0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s]
η [%] η [%]
60 60
50 50
Ø125 Ø130
40 40
30 30
Ø70 Ø70
20 20
10 10
0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s]

AE-25/4 AE-26/4 AEP-25/4 AEP-26/4
50Hz
OP-732 B N12 0,05 0,21 9,5 175
OP-742 N12 0,08 0,28 10,5 175
60Hz
OP-732 B N12 0,05 (0,06) 0,22 (0,22) 9,5 175
OP-742 N12 0,08 (0,09) 0,28 (0,28) 10,5 175
50 Hz 1500r/min G1 60 Hz 1800r/min G1 4
6 12 8 8
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s
7 7
5 10
6 6
4 8
NPSH 5 5
Ø125 NPSH
4 Ø120 4
3 6
3 3
2 4
2 2
1 2
1 1
0 0 0 0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s] 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
0 1 2 3 4 5 0 1 2 3 4 5
Q [m3/h] Q [m3/h]
P2 [kW] P2 [kW]
0,10 0,10 Ø125
Ø125
0,05 0,05
Ø70
Ø70
0,00 0,00
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s] 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
P1 [kW] P1 [kW]
0,15 0,20
Ø125 Ø125
0,15
0,10
0,10
0,05 Ø70
Ø70 0,05
0,00 0,00
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s] 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]
η [%] η [%]
60 60
Ø125 Ø110
40 40
Ø70 Ø70
20 20
0 0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s] 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 Q [l/s]

AE-25/2 AE-26/2 AEP-25/2 AEP-26/2
50Hz
OP-741 N12 0,25 0,70 10,5 215
OKN-841 D N12 0,65 1,75 14,5 260
OP-741 N12 0,25 (0,3) 0,70 (0,70) 10,5 215
60Hz
OKN-841 D N12 0,65 (0,75) 1,60 (1,60) 14,5 260
KH-871 N12 1,1 (1,3) 2,35 (2,50) 17 295
4 50 Hz 3000r/min G1 60 Hz 3600r/min G1
20 10 30 12
25 10
15 7,5 NPSH
NPSH Ø125
20 8
Ø125
10 5 15 6
10 4
5 2,5
5 2
0 0 0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s]
0 2 4 6 8 10 Q [m3/h] 0 2 4 6 8 10 12 Q [m3/h]
P2 [kW] P2 [kW]
1,0 1,2
Ø125
0,8 0,9
Ø125
0,6
0,6
0,4
0,3
0,2 Ø70
Ø70 0,0
0,0 Q [l/s] Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
P1 [kW] P1 [kW]
1,0 1,6
Ø125 Ø125
0,8 1,2
0,6
0,8
0,4
0,4
0,2 Ø70 Ø70
0,0 0,0 Q [l/s]
Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
0,0 0,5 1,0 1,5 2,0 2,5 3,0
η [%] η [%]
60 60
50 50
40 Ø125 40 Ø125
30 30
Ø70 Ø70
20 20
10 10
0 0 Q [l/s]
Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5

AE-32/4 AE-33/4 AEP-32/4 AEP-33/4
50Hz
OP-752 N13 0,2 0,65 16 240
OKN-862L D N13 0,37 1,15 20 290
60Hz
OP-752 N13 0,2 (0,24) 0,65 (0,65) 16 240
OKN-862L D N13 0,37 (0,44) 1,15 (1,15) 20 290
50 Hz 1500r/min G 1 1/4 60 Hz 1800r/min G 1 1/4 4

7 14 10 15
6 12 NPSH
Ø145
8 12
NPSH
5 10
Ø145
6 9
4 8
3 6
4 6
2 4
2 3
1 2
0 0 0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]
0 2 4 6 8 10 12 14 Q [m3/h] 0 2 4 6 8 10 12 14 16 Q [m3/h]
P2 [kW] P2 [kW]
0,25 0,5
Ø145
0,20 0,4 Ø145
0,15 0,3
0,10 0,2
0,05 0,1
Ø70 Ø70
0,00 0,0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]
P1 [kW] P1 [kW]
0,4 0,7
Ø145 0,6 Ø145
0,3 0,5
0,4
0,2
0,3
0,1 0,2
Ø70 0,1 Ø70
0,0 0,0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]
η [%] η [%]
70 70
60 60
50 50
Ø145 Ø145
40 40
30 30
20 Ø70 20 Ø70
10 10
0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 Q [l/s]

AE-32/2 AE-33/2 AEP-32/2 AEP-33/2
50Hz
KH-871 N13 1,1 2,55 21 295
KH-101 C1 N13 1,5 2,95 32 335
60Hz
KH-871 N13 1,1 (1,3) 2,35 (2,50) 21 295
KH-101 C1 N13 1,5 (1,8) 2,98 (3,02) 32 335
4
50 Hz 3000r/min G 1 1/4 60 Hz 3600r/min G 1 1/4
30 12 40 16
2 m/s 4 m/s 6 m/s 2 m/s 4 m/s 6 m/s 8 m/s
35 14
25 10
30 12
NPSH
NPSH
20 Ø145 8
25 Ø140 10
15 6 20 8
15 6
10 4
10 4
5 2
5 2
0 0 0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
0 5 10 15 20 Q [m3/h] 0 5 10 15 20 25 Q [m3/h]
P2 [kW] P2 [kW]
2,0 2,5
Ø145 2,0 Ø145
1,5
1,5
1,0
1,0 Ø90
0,5 0,5
Ø80
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
P1 [kW] P1 [kW]
2,0 3,0
Ø145 2,5
1,5 Ø145
2,0
1,0 1,5
1,0 Ø90
0,5 Ø80
0,5
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
η [%] η [%]
70 70
60 Ø145 60 Ø120
50 50
40 40
30 30 Ø90
20 Ø80 20
10 10
0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]

L-32A/4
50Hz
OP-732 B N12 0,05 0,21 16 185
OP-742 N12 0,08 0,28 16,5 185
OP-732 B N12 0,05 (0,06) 0,22 (0,22) 16 185
60Hz
OP-742 N12 0,08 (0,09) 0,28 (0,28) 16,5 185
OP-752 N12 0,2 (0,24) 0,65 (0,65) 19 240
50 Hz 1500r/min DN 32 60 Hz 1800r/min DN 32
4
4,0 8 5,5
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
5,0 5
3,5
4,5
3,0 6 4,0 4
NPSH
2,5 3,5
Ø105
3,0 3
2,0 4
2,5
NPSH
1,5 Ø105 2,0 2
1,5
1,0 2
1,0 1
0,5
0,5
0,0 0 0,0 0
0 0,5 1 1,5 2 2,5 3 Q [l/s] 0 0,5 1 1,5 2 2,5 3 3,5 Q [l/s]
0 2 4 6 8 10 Q [m3/h] 0 2 4 6 8 10 12 Q [m3/h]
P2 [kW] P2 [kW]
0,10 0,15
Ø105
0,08 Ø105 0,12
0,06 0,09
0,04 0,06
0,02 Ø70 0,03 Ø70
0,00 0,00 Q [l/s]
0 0,5 1 1,5 2 2,5 3 Q [l/s] 0 0,5 1 1,5 2 2,5 3 3,5
P1 [kW] P1 [kW]
0,14 0,24
0,12 Ø105 Ø105
0,20
0,10 0,16
0,08
0,12
0,06
0,04 Ø70 0,08 Ø70
0,02 0,04
0,00 0,00 Q [l/s]
0 0,5 1 1,5 2 2,5 3 Q [l/s] 0 0,5 1 1,5 2 2,5 3 3,5
η [%] η [%]
70 70
60 60
50 50
Ø105 Ø105
40 Ø70 40 Ø70
30 30
20 20 Q [l/s]
0 0,5 1 1,5 2 2,5 3 Q [l/s] 0 0,5 1 1,5 2 2,5 3 3,5

L-32A/2
50Hz
OP-741 N12 0,25 0,7 17 225
OKN-841 D N12 0,65 1,75 21 275
OP-741 N12 0,25 (0,3) 0,7 (0,7) 17 225
60Hz
OKN-841 D N12 0,65 (0,75) 1,6 (1,6) 21 275
KH-871 N12 1,1 (1,3) 2,35 (2,5) 24 295
4 50 Hz 3000r/min DN 32 60 Hz 3600r/min DN 32
16 16 24 12
2 m/s 4 m/s 6 m/s 2 m/s 4 m/s 6 m/s
14 14
20 10
NPSH
12 12 Ø105
NPSH
16 8
10 Ø105 10
8 8 12 6
6 6
8 4
4 4
4 2
2 2
0 0 0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
0 5 10 15 20 Q [m3/h] 0 10 20 Q [m3/h]
P2 [kW] P2 [kW]
0,8 1,2
Ø105
Ø105 1,0
0,6
0,8
0,4 0,6
0,4
0,2 Ø70
Ø70 0,2
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
P1 [kW] P1 [kW]
1,0 1,6
Ø105 Ø105
0,8 1,2
0,6
0,8
0,4
Ø70 0,4 Ø70
0,2
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
η [%] η [%]
80 80
60 60
Ø105 Ø105
40 Ø70 40 Ø70
20 20
0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]

ALS-1032/4
50Hz
OP-752 N13 0,2 0,65 22 240
OKN-862L D N13 0,37 1,15 26 290
60Hz
OP-752 N13 0,2 (0,24) 0,65 (0,65) 22 240
OKN-862L D N13 0,37 (0,44) 1,15 (1,15) 26 290
50 Hz 1500r/min DN 32 60 Hz 1800r/min DN 32 4
7 14 10 12,5
NPSH
6 12 Ø130
8 10,0
5 10
NPSH
Ø145 6 7,5
4 8
3 6
4 5,0
2 4
2 2,5
1 2
0 0 0 0,0
0 0,5 1 1,5 2 2,5 3 3,5 Q [l/s] 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 Q [l/s]
0 2 4 6 8 10 12 Q [m3/h] 0 2 4 6 8 10 12 14 16 Q [m3/h]
P2 [kW] P2 [kW]
0,20 0,4
Ø145
0,15 0,3 Ø145
0,10 0,2
0,05 0,1
Ø70 Ø70
0,00 Q [l/s] 0,0
0 0,5 1 1,5 2 2,5 3 3,5 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 Q [l/s]
P1 [kW] P1 [kW]
0,30 0,5
0,25 Ø145 Ø145
0,4
0,20
0,3
0,15
0,2
0,10
Ø70 0,1 Ø70
0,05
0,00 Q [l/s] 0,0
0 0,5 1 1,5 2 2,5 3 3,5 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 Q [l/s]
η [%] η [%]
70 70
Ø145
60 60
50 50
Ø130
40 40
30 30
20 Ø70 Q [l/s] 20 Ø70
0 0,5 1 1,5 2 2,5 3 3,5 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 Q [l/s]

ALS-1032/2
50Hz
KH-871 N13 1,1 2,55 27 295
KH-101 C1 N13 1,5 2,95 39 335
60Hz
KH-871 N13 1,1 (1,3) 2,35 (2,50) 27 295
KH-101 C1 N13 1,5 (1,8) 2,98 (3,02) 39 335
30 12 40 12
2 m/s 4 m/s 6 m/s 2 m/s 4 m/s 6 m/s 8 m/s
35
25 10 NPSH 10
NPSH Ø130
30
Ø130
20 8 8
25
15 6 20 6
15
10 4 4
10
5 2 2
5
0 0 0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
Q [m 3/h]
0 5 10 15 20 Q [m3/h] 0 5 10 15 20 25
P2 [kW] P2 [kW]
1,6 Ø145 2,0
Ø130
1,2 1,6
1,2
0,8
0,8
Ø80
0,4 Ø80 0,4
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
P1 [kW] P1 [kW]
2,0 3,0
Ø145 2,5
1,5 2,0 Ø130
1,0 1,5
1,0 Ø80
0,5 Ø80
0,5
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
η [%] η [%]
70 70
60 Ø145 60
Ø120
50 50
40 40
30 30
Ø80 Ø80
20 20
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]

ALS-1040/4
50Hz
OP-732 B N12 0,05 0,21 17 185
OP-742 N12 0,08 0,28 18 185
60Hz
OP-732 B N12 0,05 (0,06) 0,22 (0,22) 17 185
OP-742 N12 0,08 (0,09) 0,28 (0,28) 18 185
4,0 8 5,5 11
0,5 m/s 1 m/s 1,5 m/s 2 m/s 2,5 m/s 1 m/s 2 m/s 3 m/s
5,0 10
3,5 7
4,5 9
3,0 6
4,0 8
2,5 5 3,5 7
NPSH 3,0 6
NPSH
2,0 Ø105 4 Ø105
2,5 5
1,5 3 2,0 4
1,0 2 1,5 3
1,0 2
0,5 1
0,5 1
0,0 0 0,0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q [l/s] 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s]
0 2 4 6 8 10 12 Q [m 3/h] 0 2 4 6 8 10 12 14 Q [m3/h]
P2 [kW] P2 [kW]
0,10
Ø105 Ø90
0,08 0,08
0,06
0,04 0,04
Ø70
0,02 Ø70
0,00 Q [l/s] 0,00 Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
P1 [kW] P1 [kW]
0,14 0,20
0,12 Ø105
0,16
0,10
0,08 0,12
0,06 0,08 Ø70
0,04 Ø70
0,02 0,04
0,00 Q [l/s] 0,00 Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
η [%] η [%]
80 80
70 70
60 60
50 Ø105 50
40 40
30 Ø70 30 Ø70
20 Q [l/s] 20 Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0

ALS-1040/2
50Hz
OP-741 N12 0,25 0,7 18 225
OKN-841 D N12 0,65 1,75 22 275
OP-741 N12 0,25 (0,3) 0,7 (0,7) 18 225
60Hz
OKN-841 D N12 0,65 (0,75) 1,6 (1,6) 22 275
KH-871 N12 1,1 (1,3) 2,4 (2,5) 24 295
14 14 20 10
12 12
16 NPSH 8
Ø105
10 10
NPSH 12 6
8 Ø105 8
6 6 8 4
4 4
4 2
2 2
0 0
0 0 0 2 4 6 8 Q [l/s]
0 1 2 3 4 5 6 7 Q [l/s] Q [m3/h]
0 5 10 15 20 25
25 Q [m /h]
3
0 5 10 15 20
P2 [kW] P2 [kW]
1,0 1,2
Ø105
0,8 0,9
Ø105
0,6
0,6
0,4
0,2 0,3 Ø70
Ø70
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
P1 [kW] P1 [kW]
1,0 1,8
Ø105 1,5 Ø105
0,8
1,2
0,6
0,9
0,4 0,6
0,2 Ø70 0,3 Ø70
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
η [%] η [%]
80 80
60 60
40 Ø105 40 Ø105
20 Ø70 20 Ø70
0 0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]

L-40A/4
50Hz
OP-752 N13 0,2 0,65 21 240
OKN-862L D N13 0,37 1,15 25 295
60Hz
OP-752 N13 0,2 (0,24) 0,65 (0,65) 21 240
OKN-862L D N13 0,37 (0,44) 1,15 (1,15) 25 295
50 Hz
H [m]
1500r/min DN 40
NPSH [m]
60 Hz
H [m]
1800r/min DN 40
NPSH [m]
4
8 12 10 20
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s
18
7
8 16
6 NPSH 9
Ø145 14
5
6 NPSH 12
Ø145
4 6 10
4 8
3
6
2 3
2 4
1
2
0 0 0 0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q [l/s] 0 1 2 3 4 5 Q [l/s]
0 2 4 6 8 10 12 14 Q [m3/h] 0 5 10 15 Q [m3/h]
P2 [kW] P2 [kW]
0,25 0,4
Ø145 Ø145
0,20 0,3
0,15
0,2
0,10
0,05 0,1
Ø70 Ø70
0,00 Q [l/s] 0,0 Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 0 1 2 3 4 5
P1 [kW] P1 [kW]
0,40 0,7
0,35 Ø145 0,6 Ø145
0,30 0,5
0,25
0,4
0,20
0,15 0,3
0,10 0,2
0,05 Ø70 0,1 Ø70
0,00 Q [l/s] 0,0
Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 0 1 2 3 4 5
η [%] η [%]
80 80
60 60
Ø145
Ø145 40
40
Ø70 Ø70
20 20
0 Q [l/s] 0 Q [l/s]
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 0 1 2 3 4 5

L-40A/2
50Hz
KH-871 N13 1,1 2,55 26 295
KH-101 C1 N13 1,5 2,95 37 335
60Hz
KH-871 N13 1,1 (1,3) 2,35 (2,50) 26 295
KH-101 C1 N13 1,5 (1,8) 2,98 (3,02) 37 335
30 12 40 16
35 14
25 10
NPSH 30 12
20 Ø145 8 NPSH
25 Ø140 10
15 6 20 8
15 6
10 4
10 4
5 2
5 2
0 0 0 0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
0 5 10 15 20 Q [m3/h] 0 5 10 15 20 25 Q [m3/h]
P2 [kW] P2 [kW]
2,0 2,0
Ø140
1,5 Ø145 1,5
1,0 1,0
0,5 0,5 Ø80

Ø80
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
P1 [kW] P1 [kW]
2,0 2,5
Ø145 Ø140
1,5 2,0
1,5
1,0
1,0
0,5 Ø80
Ø80 0,5
0,0 0,0
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]
η [%] η [%]
70 70
60 Ø130 60
Ø120
50 50
40 40
Ø80 Ø80
30 30
20 20
0 1 2 3 4 5 6 Q [l/s] 0 1 2 3 4 5 6 7 Q [l/s]

L-50A/4 LP-50A/4

OP-752 F15 0,2 0,65 23 250
50Hz
OP-762 F15 0,25 0,82 24 250
OKN-862 D F15 0,37 1,15 27 280
OP-752 F15 0,2 (0,24) 0,65 (0,65) 23 250
60Hz
OP-762 F15 0,25 (0,3) 0,82 (0,82) 24 250
OKN-862 D F15 0,37 (0,44) 1,15 (1,15) 27 280
KH-100 A2 F15 0,55 (0,66) 1,28 (1,30) 35 325
8
H [m]
1 m/s 2 m/s
NPSH [m]
3 m/s
8 12
H [m]
1 m/s 2 m/s 3 m/s
NPSH [m]
12 4
11 11
7 7
10 10
NPSH
6 Ø150 6 9 9
NPSH
8 Ø150 8
5 5
7 7
4 4 6 6
5 5
3 3
4 4
2 2 3 3
2 2
1 1
1 1
0 0 0 0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
0 5 10 15 20 25 0 5 10 15 20 25 Q [m3/h]
Q [m3/h]
P2 [kW] P2 [kW]
0,4 0,7
Ø150 0,6 Ø150
0,3 0,5
0,4
0,2
0,3
0,1 0,2
Ø80 0,1 Ø80
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
P1 [kW] P1 [kW]
0,6 1,0
Ø150 Ø150
0,5 0,8
0,4
0,6
0,3
0,4
0,2
0,1 Ø80 0,2 Ø80
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
η [%] η [%]
80 80
Ø150 60 Ø150
60
40 40
Ø80 Ø80
20 20
0 0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]

L-50B/2 LH-50B/2 LP-50B/2
50Hz 60Hz
KH-871 F15 1,1 2,55 30 315
KH-871 F15 1,1 (1,3) 2,35 (2,50) 30 315
20 20 24 24
20 20
16 16
16 16
12 12 NPSH
NPSH Ø110
Ø120
12 12
8 8
8 8
4 4
4 4
0 0 0 0
0 2 4 6 8 10 Q [l/s] 0 2 4 6 8 10 Q [l/s]
0 5 10 15 20 25 30 35 Q [m3/h] 0 5 10 15 20 25 30 35 Q [m3/h]
P2 [kW] P2 [kW]
1,2 1,4
Ø120 Ø110
1,0 1,2
0,8 1,0
0,8
0,6 Ø90
0,6
0,4 Ø90 0,4
0,2 0,2
0,0 0,0
0 2 4 6 8 10 Q [l/s] 0 2 4 6 8 10 Q [l/s]
P1 [kW] P1 [kW]
1,5 2,0
Ø120
1,5 Ø110
1,0
1,0
0,5 Ø90
Ø90 0,5
0,0 0,0
0 2 4 6 8 10 Q [l/s] 0 2 4 6 8 10 Q [l/s]
η [%] η [%]
80 80
Ø110
60 60
40 Ø120 40
20 Ø90 20 Ø90
0 0
0 2 4 6 8 10 Q [l/s] 0 2 4 6 8 10 Q [l/s]

L-50D/4 LH-50D/4 LP-50D/4
50Hz
OKN-862L D F16 0,37 1,15 30 280
60Hz
OKN-862L D F16 0,37 (0,44) 1,15 (1,15) 30 280
KH-100 A2 F15 0,55 (0,66) 1,28 (1,30) 35 325
8
H [m]
1 m/s 2 m/s
NPSH [m]
3 m/s
8 12
H [m]
1 m/s 2 m/s 3 m/s
NPSH [m]
12 4
11 11
7 7
10 10
NPSH
6 Ø150 6 9 9
NPSH
8 8
5 5 Ø150
7 7
4 4 6 6
5 5
3 3
4 4
2 2 3 3
2 2
1 1
1 1
0 0 0 0
0 1 2 3 4 5 6 7 Q [l/s] 0 2 4 6 8 Q [l/s]
0 5 10 15 20 25 0 5 10 15 20 25 Q [m3/h]
Q [m3/h]
P2 [kW] P2 [kW]
0,4 0,8
Ø150
0,3 0,6 Ø150
0,2 0,4
0,1 0,2
Ø80 Ø80
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
P1 [kW] P1 [kW]
0,6 1,0
0,5 Ø150 Ø150
0,8
0,4 Ø150
0,6
0,3
0,4
0,2
0,1 0,2
Ø80 Ø80
0,0 0,0
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]
η [%] η [%]
80 80
70 70
60 60 Ø150
Ø150
50 50
40 40
Ø80 30 Ø80
30
20 20
0 1 2 3 4 5 6 7 Q [l/s] 0 1 2 3 4 5 6 7 8 Q [l/s]

L-50D/2 LH-50D/2 LP-50D/2

KH-101 C1 F16 1,5 2,95 40 355
50Hz
KH-101 D1 F16 2,2 4,28 43 355
KH-112 C1 F16 3 6,05 49 400
KH-101 C1 F16 1,5 (1,8) 2,98 (3,02) 40 355
60Hz
KH-101 D1 F16 2,2 (2,6) 4,35 (4,33) 43 355
KH-112 C1 F16 3 (3,6) 6,0 (6,05) 49 400
KH-112 E1 F16 4 (4,8) 7,9 (8,0) 54 400
H [m] H [m]
30 45
40
25
35
20 30
25
15
20
10 15
10
5
5
0 0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]
Q [m3/h] Q [m3/h]
0 10 20 30 40 50 0 10 20 30 40 50
P2 [kW] P2 [kW]
4 5
Ø150
3 Ø150 4
3
2
2
1 1 Ø90
Ø90
0 0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]
P1 [kW] P1 [kW]
4,0 8
Ø150 7
3,0 6 Ø150
5
2,0 4
3
1,0 Ø90 2
1 Ø90
0,0 0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]
η [%] η [%]
70 70
Ø150
60 60 Ø140
50 50
Ø90 Ø90
40 40
30 30
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]

L-50C/2 LH-50C/2 LP-50C/2
50Hz
KH-101 C1 F16 1,5 2,95 40 355
KH-101 D1 F16 2,2 4,28 43 355
KH-101 C1 F16 1,5 (1,8) 2,98 (3,02) 40 355
60Hz
KH-101 D1 F16 2,2 (2,6) 4,35 (4,33) 43 355
KH-112 C1 F16 3 (3,6) 6,00 (6,05) 49 400
KH-112 E1 F16 4 (4,8) 7,9 (8,0) 54 400
30 24 45 36
40 32
25 20
35 28
20 16 30 24
25 20
NPSH
15 Ø150 12 NPSH
20 Ø150 16
10 8 15 12
10 8
5 4
5 4
0 0 0 0
0 2 4 6 8 10 Q [l/s] 0 2 4 6 8 10 12 Q [l/s]
0 5 10 15 20 25 30 35 Q [m3/h] 0 5 10 15 20 25 30 35 40 Q [m3/h]
P2 [kW] P2 [kW]
2,5 4
Ø150 Ø150
2,0 3
1,5
Ø120 2
1,0
Ø110
0,5 1
0,0 Q [l/s] 0 Q [l/s]

0 2 4 6 8 10 0 2 4 6 8 10 12
P1 [kW] P1 [kW]
3,0 5
Ø150 Ø150
2,5 4
2,0
3
1,5 Ø120 2
1,0 Ø110
0,5 1
0,0 Q [l/s] 0 Q [l/s]
0 2 4 6 8 10 0 2 4 6 8 10 12
η [%] η [%]
70 70
60 60
Ø150 Ø150
50 50
40 Ø120 40
30 30 Ø110
20 Q [l/s] 20 Q [l/s]
0 2 4 6 8 10 0 2 4 6 8 10 12

L-50S/4 LH-50S/4

KH-101 C2 F29 1,1 2,44 85 430
50Hz
KH-101 D2 F29 1,5 3,27 88 430
KH-112 C2 F29 2,2 4,60 93 475
KH-112 E2 F29 3 6,25 98 475
KH-101 C2 F29 1,1 (1,3) 2,43 (2,43) 85 430
KH-101 D2 F29 1,5 (1,8) 3,23 (3,32) 88 430
60Hz
KH-112 C2 F29 2,2 (2,6) 4,55 (4,60) 93 475
KH-112 E2 F29 3 (3,6) 6,15 (6,25) 98 475
KH-132 C2 F29 4 (4,8) 8,17 (8,30) 125 520
KH-132 E2 F29 5,5 (6,6) 11,00 (11,15) 130 520
25 10 35 14
NPSH 30 12
20 Ø266 8 NPSH
Ø266
25 10
15 6
20 8
15 6
10 4
10 4
5 2
5 2
0 0 0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
Q [m3/h]
0 10 20 30 40 Q [m3/h] 0 10 20 30 40 50
P2 [kW] P2 [kW]
4 6
5 Ø266
3 Ø266
4
2 3
2
1 Ø166
Ø166 1
0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
P1 [kW] P1 [kW]
4 7
Ø266 6 Ø266
3 5
4
2 3
1 2
Ø166 1 Ø166
0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
η [%] η [%]
60 60
Ø266 Ø266
50 50
Ø166 Ø166
40 40
30 30
20 20
10 10
0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]

L-50S/2 LH-50S/2

KH-132 C1 F29 5,5 10,20 125 520
KH-132 E1 F29 7,5 13,75 135 520
50Hz
KZ-165 E1 F29 11 20,20 185 680
KZ-165 F1 F29 15 26,95 190 680
KZ-165A H1 F29 18,5 32,60 195 680
KH-132 C1 F29 5,5 (6,6) 10,25 (10,40) 125 520
KH-132 E1 F29 7,5 (9) 13,80 (14,05) 135 520
60Hz
KZ-165 E1 F29 11 (13) 20,60 (20,30) 185 680
KZ-165 F1 F29 15 (18) 28,05 (27,90) 190 680
KZ-165A H1 F29 18,5 (22) 33,90 (33,60) 195 680
4
90 18 120 12
80 16
100 NPSH 10
70 14 Ø226
60 12 80 8
50 10
60 6
40 8
30 6 40 4
20 4
20 2
10 NPSH 2
Ø226
0 0 0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
0 10 20 30 40 50 60 Q [m3/h] 0 10 20 30 40 50 60 70 Q [m 3/h]
P2 [kW] P2 [kW]
20 25
Ø256
16 20 Ø226
12 15
8 10
4 Ø146 5 Ø146
0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
P1 [kW] P1 [kW]
25 25
Ø256 Ø226
20 20
15 15
10 10
5 Ø146
Ø146 5
0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
η [%] η [%]
70 70
60 Ø146 60
Ø146
50 50 Ø226
Ø256
40 40
30 30
20 20
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 Q [l/s]

L-65A/4 LH-65A/4

OKN-852 D F19 0,2 0,75 37 310
OKN-852 D F19 0,37 1 37 310
50Hz
KH-100 A2 F19 0,55 1,27 45 320
KH-100 B2 F19 0,75 1,74 45 320
KH-101 C2 F19 1,1 2,44 50 370
KH-101 D2 F19 1,5 3,27 52 370
OKN-852 D F19 0,37 (0,44) 1 (1) 37 310
KH-100 A2 F19 0,55 (0,66) 1,28 (1,30) 45 320
KH-100 B2 F19 0,75 (0,9) 1,70 (1,74) 45 320
60Hz
KH-101 C2 F19 1,1 (1,3) 2,43 (2,43) 50 370
KH-101 D2 F19 1,5 (1,8) 3,23 (3,32) 52 370
KH-112 C2 F19 2,2 (2,6) 4,55 (4,60) 58 415
KH-112 E2 F19 3 (3,6) 6,15 (6,25) 62 415
12 12 18 9
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
16 NPSH 8
10 10 Ø188
14 7
8 8 12 6
NPSH
Ø188 10 5
6 6
8 4
4 4 6 3
4 2
NPSH
2 NPSH 2
Ø113
Ø113 2 1
0 0 0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
Q [m3/h]
0 10 20 30 40 Q [m3/h] 0 10 20 30 40 50
P2 [kW] P2 [kW]
1,25 Ø188 2,5
1,00 2,0 Ø188
0,75 1,5
0,50 1,0
0,25 0,5
Ø113 Ø113
0,00 0,0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
P1 [kW] P1 [kW]
1,50 3,0
Ø188
1,25 2,5 Ø188
1,00 2,0
0,75 1,5
0,50 1,0
0,25 Ø113 0,5 Ø113
0,00 0,0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]
η [%] η [%]
80 80
60 60
Ø188 Ø188
40 40
Ø113 Ø113
20 20
0 0
0 2 4 6 8 10 12 Q [l/s] 0 2 4 6 8 10 12 14 Q [l/s]

L-65B/2 LH-65B/2 LS-65B/2

KH-101 C1 F19 1,5 2,95 50 370
KH-101 D1 F19 2,2 4,28 52 370
50Hz
KH-112 C1 F19 3,0 6,05 58 415
KH-112 E1 F19 4,0 7,95 63 415
KH-132 C1 F19 5,5 10,20 87 475
KH-132 E1 F19 7,5 13,75 95 475
KH-101 C1 F19 1,5 (1,8) 2,98 (3,02) 50 370
KH-101 D1 F19 2,2 (2,6) 4,35 (4,33) 52 370
60Hz
KH-112 C1 F19 3 (3,6) 6,00 (6,05) 58 415
KH-112 E1 F19 4 (4,8) 7,90 (8,00) 63 415
KH-132 C1 F19 5,5 (6,6) 10,25 (10,40) 87 475
KH-132 E1 F19 7,5 (9) 13,80 (14,05) 95 475
50 Hz
50
H [m]
3000r/min
1 m/s 2 m/s
DN 65
3 m/s 4 m/s
NPSH [m]
5 m/s 20
60 Hz
70
H [m]
3600r/min
1 m/s 2 m/s
DN 65
3 m/s 4 m/s
NPSH [m]
5 m/s 14
4
45
60 NPSH 12
40 16 Ø184
NPSH
35 Ø184 50 10
30 12
40 8
25
30 NPSH 6
20 8 Ø113
15 20 4
NPSH
10 Ø113 4
10 2
5
0 0 0 0
0 4 8 12 16 20 Q [l/s] 0 4 8 12 16 20 Q [l/s]
0 10 20 30 40 50 60 70 Q [m3/h] 0 10 20 30 40 50 60 70 Q [m3/h]
P2 [kW] P2 [kW]
8 10
Ø184
Ø184 8
6
6
4
4
2 2 Ø113
Ø113
0 Q [l/s] 0 Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20
P1 [kW] P1 [kW]
8 Ø184 12
10 Ø184
6
8
4 6
4
2
Ø113 2 Ø113
0 Q [l/s] 0 Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20
η [%] η [%]
70 70
60 60 Ø174
50 Ø184 50
40 40
30 Ø113 30 Ø113
20 20
10 10
0 0 Q [l/s]
Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20

ALP-1066/4

OKN-852 D F19 0,37 1,0 37 310
KH-100 A2 F19 0,55 1,27 44 320
50Hz
KH-100 B2 F19 0,75 1,74 44 320
KH-101 C2 F19 1,1 2,44 48 370
KH-101 D2 F19 1,5 3,27 52 370
OKN-852 D F19 0,37 (0,44) 1 (1) 37 310
KH-100 A2 F19 0,55 (0,66) 1,28 (1,3) 44 320
KH-100 B2 F19 0,75 (0,9) 1,70 (1,74) 44 320
60Hz
KH-101 C2 F19 1,1 (1,3) 2,43 (2,43) 48 370
KH-101 D2 F19 1,5 (1,8) 3,23 (3,32) 52 370
KH-112 C2 F19 2,2 (2,6) 4,55 (4,6) 58 415
KH-112 E2 F19 3 (3,6) 6,15 (6,25) 62 415
4
14 14 18 18
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
16 NPSH 16
12 12
Ø188
NPSH 14 14
10 Ø188 10
12 12
8 8 10 10
8 8
6 6
6 6
4 4
4 4
2 2 2 2
0 0
0 0 0 2 4 6 8 10 12 14 16 Q [l/s]
0 2 4 6 8 10 12 14 Q [l/s]
Q [m3/h] 0 10 20 30 40 50 Q [m3/h]
0 10 20 30 40 50
P2 [kW] P2 [kW]
1,4 Ø188 2,5
1,2 Ø188
2,0
1,0
0,8 1,5
0,6 1,0
0,4
0,5
0,2 Ø113 Ø113
0,0 0,0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]
P1 [kW] P1 [kW]
1,8 3,0
1,6 Ø188 Ø188
1,4 2,5
1,2 2,0
1,0 1,5
0,8
0,6 1,0
0,4 Ø113 0,5 Ø113
0,2
0,0 0,0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]
η [%] η [%]
70 70
60 60
50 50
40 40
Ø188 Ø188
30 30
20 Ø113 20 Ø113
10 10
0 0
0 2 4 6 8 10 12 14 Q [l/s] 0 2 4 6 8 10 12 14 16 Q [l/s]

ALP-1065/2

KH-101 C1 F19 1,5 2,95 51 370
KH-101 D1 F19 2,2 4,28 52 370
50Hz
KH-112 C1 F19 3 6,05 58 415
KH-112 E1 F19 4 7,95 62 415
KH-132 C1 F19 5,5 10,20 86 475
KH-132 E1 F19 7,5 13,75 94 475
KH-101 D1 F19 2,2 (2,6) 4,35 (4,33) 52 370
KH-112 C1 F19 3 (3,6) 6,00 (6,05) 58 415
60Hz
KH-112 E1 F19 4 (4,8) 7,90 (8,00) 62 415
KH-132 C1 F19 5,5 (6,6) 10,25 (10,40) 86 475
KH-132 E1 F19 7,5 (9) 13,80 (14,05) 94 475
4
45 18 70 14
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s 1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
40 16
60 12
35 14 NPSH
50 Ø184 10
30 NPSH 12
Ø184
25 10 40 8
20 8 30 6
15 6
20 4
10 4
10 2
5 2
0 0 0 0
0 4 8 12 16 20 Q [l/s] 0 4 8 12 16 20
Q [l/s]
0 20 40 60 Q [m 3/h] 0 20 40 60 Q [m3/h]
P2 [kW] P2 [kW]
8 10
Ø184 Ø184
6 8
6
4
4
2 2 Ø113
Ø113
0 Q [l/s] 0 Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20
P1 [kW] P1 [kW]
9 12
8 Ø184 Ø184
10
7
6 8
5 6
4
3 4
2 2 Ø113
1 Ø113
0 Q [l/s] 0 Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20
η [%] η [%]
70 70
60 60 Ø174
50 50
40 Ø184 40
30 30
20 Ø113 20 Ø113
10 10
0 Q [l/s] 0 Q [l/s]
0 4 8 12 16 20 0 4 8 12 16 20

L-80A/4 LH-80A/4

OKN-852 D F19 0,37 1,0 38 315
KH-100 A2 F19 0,55 1,27 46 325
50Hz
KH-100 B2 F19 0,75 1,74 46 325
KH-101 C2 F19 1,1 2,44 51 375
KH-101 D2 F19 1,5 3,27 54 375
KH-112 C2 F19 2,2 4,60 60 420
KH-112 E2 F19 3 6,25 64 420
KH-100 A2 F19 0,55 (0,66) 1,27 (1,30) 46 325
KH-100 B2 F19 0,75 (0,9) 1,74 (1,74) 46 325
60Hz
KH-101 C2 F19 1,1 (1,3) 2,43 (2,43) 51 375
KH-101 D2 F19 1,5 (1,8) 3,23 (3,32) 54 375
KH-112 C2 F19 2,2 (2,6) 4,55 (4,6) 60 420
KH-112 E2 F19 3 (3,6) 6,15 (6,25) 64 420
4
12 12 18 18
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
16 16
10 10
14 14
NPSH
Ø188
8 8 12 12
NPSH
Ø188
10 10
6 6
8 8
4 4 6 6
NPSH 4 4
2 Ø120 2
2 NPSH 2
Ø120
0 0 0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
0 20 40 60 Q [m 3/h] 0 20 40 60 Q [m3/h]
P2 [kW] P2 [kW]
1,4 2,5
1,2 Ø188 Ø188
2,0
1,0
0,8 1,5
0,6 1,0
0,4
0,2 Ø120 0,5
Ø120
0,0 0,0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
P1 [kW] P1 [kW]
1,8 3,0
1,6 Ø188 Ø188
1,4 2,5
1,2 2,0
1,0
0,8 1,5
0,6 1,0
0,4
0,2 Ø120 0,5 Ø120
0,0 0,0
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
η [%] η [%]
70 70
60 60
50 Ø188 50 Ø188
40 40
30 Ø120 Ø120
30
20 20
0 2 4 6 8 10 12 14 16 18 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]

L-80A/2 LH-80A/2

KH-101 D1 F19 2,2 4,28 54 375
KH-112 C1 F19 3 6,05 60 420
50Hz
KH-112 E1 F19 4 7,95 64 420
KH-132 C1 F19 5,5 10,2 88 480
KH-132 E1 F19 7,5 13,75 96 480
KH-112 C1 F19 3 (3,6) 6,00 (6,05) 60 420
60Hz
KH-112 E1 F19 4 (4,8) 7,9 (8,0) 64 420
KH-132 C1 F19 5,5 (6,6) 10,25 (10,40) 88 480
KH-132 E1 F19 7,5 (9) 13,80 (14,05) 96 480
35 14 45 18
40 16
30 12
NPSH
Ø166 35 14
25 10 NPSH
30 Ø156 12
20 8 25 10
15 6 20 8
15 6
10 4
10 4
NPSH NPSH
5 Ø120 2 Ø120
5 2
0 0 0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
0 20 40 60 80 100 Q [m3/h] 0 20 40 60 80 100 Q [m3/h]
P2 [kW] P2 [kW]
8 10
Ø166 Ø156
8
6
6
4
4
Ø120
2 Ø120 2
0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
P1 [kW] P1 [kW]
10 12
8 Ø166 10 Ø156
6 8
6
4
4 Ø120
2 Ø120 2
0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
η [%] η [%]
80 70
70 60
60 50
50 40
40 Ø166
Ø120 Ø147
30 Ø120 30
20 20
10 10
0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]

ALS-1081/4

OKN-852 D F19 0,37 1,0 43 315
KH-100 A2 F19 0,55 1,27 50 325
50Hz
KH-100 B2 F19 0,75 1,74 50 325
KH-101 C2 F19 1,1 2,44 54 375
KH-101 D2 F19 1,5 3,27 58 375
OKN-852 D F19 0,37 (0,44) 1,0 (1,0) 43 315
KH-100 A2 F19 0,55 (0,66) 1,28 (1,3) 50 325
KH-100 B2 F19 0,75 (0,9) 1,7 (1,74) 50 325
60Hz
KH-101 C2 F19 1,1 (1,3) 2,43 (2,43) 54 375
KH-101 D2 F19 1,5 (1,8) 3,23 (3,32) 58 375
KH-112 C2 F19 2,2 (2,6) 4,55 (4,60) 64 420
KH-112 E2 F19 3 (3,6) 6,15 (6,25) 68 420
12 12 18 9
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
16 8
10 10
14 7
NPSH
Ø188
8 8 12 6
10 5
6 6
NPSH 8 4
Ø188
4 4 6 3
4 2
2 2
2 1
0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
0 10 20 30 40 50 60 70 Q [m3/h] 0 10 20 30 40 50 60 70 Q [m3/h]
P2 [kW] P2 [kW]
1,5 2,5
Ø188 Ø188
2,0
1,0
1,5
1,0
0,5
0,5
Ø120 Ø120
0,0 0,0
0 2 4 6 8 10 12 14 16 18 20 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
P1 [kW] P1 [kW]
2,0 3,0
Ø188 Ø188
2,5
1,5
2,0
1,0 1,5
1,0
0,5
Ø120 0,5 Ø120
0,0 0,0
0 2 4 6 8 10 12 14 16 18 20 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
η [%] η [%]
80 80
70 70
60 60
50 50
40 40
30 Ø188 30 Ø188
20 Ø120 20 Ø120
0 2 4 6 8 10 12 14 16 18 20 Q [l/s] 0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]

ALS-1081/2

KH-101 D1 F19 2,2 4,28 58 375
KH-112 C1 F19 3 6,05 64 420
50Hz
KH-112 E1 F19 4 7,95 68 420
KH-132 C1 F19 5,5 10,20 92 480
KH-132 E1 F19 7,5 13,75 99 480
KH-112 C1 F19 3 (3,6) 6,00 (6,05) 64 420
60Hz
KH-112 E1 F19 4 (4,8) 7,90 (8,00) 68 420
KH-132 C1 F19 5,5 (6,6) 10,25 (10,40) 92 480
KH-132 E1 F19 7,5 (9) 13,80 (14,05) 99 480
50 Hz
H [m]
3000r/min DN 80
NPSH [m]
60 Hz
H [m]
3600r/min DN 80
NPSH [m]
4
35 4 m/s 5 m/s 6 m/s 14 45 5 m/s 6 m/s 18
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
40 16
30 12
35 14
25 10
NPSH 30 NPSH 12
Ø166 Ø156
20 8 25 10
15 6 20 8
15 6
10 4
10 4
5 2
5 2
0 0 0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]
0 20 40 60 80 100 120 Q [m3/h] 0 20 40 60 80 100 120 Q [m3/h]
P2 [kW] P2 [kW]
10 10
Ø156
8 Ø166 8
6 6
4 4 Ø120
2 Ø120 2
0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]
P1 [kW] P1 [kW]
12 12
10 10 Ø156
8 Ø166 8
6 6
4 4 Ø120
2 Ø120 2
0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]
η [%] η [%]
80 80
70 70 Ø156
60 60
50 50
40 Ø166 40
30 30
20 Ø120 20 Ø120
10 10
0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]

L-80S/4 LH-80S/4

KH-101 C2 F29 1,1 2,44 86 430
KH-101 D2 F29 1,5 3,27 89 430
50Hz
KH-112 C2 F29 2,2 4,6 94 475
KH-112 E2 F29 3 6,25 99 475
KH-132 C2 F29 4 8,13 125 520
KH-132 E2 F29 5,5 10,95 135 520
KH-101 D2 F29 1,5 (1,8) 3,23 (3,32) 89 430
KH-112 C2 F29 2,2 (2,6) 4,55 (4,6) 94 475
60Hz
KH-112 E2 F29 3 (3,6) 6,15 (6,25) 99 475
KH-132 C2 F29 4 (4,8) 8,17 (8,3) 125 520
KH-132 E2 F29 5,5 (6,6) 11,00 (11,15) 135 520
KH-133 G2 F29 7,5 (9) 14,80 (15,47) 147 570
30 24 40 28
NPSH 35
Ø270 NPSH 24
25 20
Ø270
30
20
20 16
25
16
15 12 20
12
15
10 8
8
10
NPSH
5 Ø175 4
5 4
NPSH
Ø190
0 0 0 0
0 5 10 15 20 25 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
0 20 40 60 80 Q [m3/h] 0 20 40 60 80 100 Q [m3/h]
P2 [kW] P2 [kW]
6 10
Ø270 Ø270
5 8
4 6
3
4
2
2 Ø175
1 Ø175
0 0
0 5 10 15 20 25 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
P1 [kW] P1 [kW]
7 12
6 Ø270 Ø270
9
5
4 6
3
2 3
1 Ø175 Ø175
0 0
0 5 10 15 20 25 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
η [%] η [%]
70 70
60 60
50 50 Ø270
40 Ø270 40
30 30 Ø175
Ø175
20 20
10 10
0 0
0 5 10 15 20 25 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]

L-80S/2 LH-80S/2

KH-132 E1 F29 7,5 13,75 130 520
50Hz
KZ-165 E1 F29 11 20,2 185 680
KZ-165 F1 F29 15 26,95 190 680
KZ-165A H1 F29 18,5 32,6 195 680
KH-132 E1 F29 7,5 (9) 13,8 (14,05) 130 520
60Hz
KZ-165 E1 F29 11 (13) 20,6 (20,3) 185 680
KZ-165 F1 F29 15 (18) 28,05 (27,9) 190 680
KZ-165A H1 F29 18,5 (22) 33,9 (33,6) 195 680
70 17,5 90 22,5
80 NPSH 20
60 NPSH 15
Ø215 Ø205
70 17,5
50 12,5
60 15
40 10 50 12,5
30 7,5 40 10
30 7,5
20 5
20 5
10 2,5
10 2,5
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30 Q [l/s]
Q [l/s]
0 20 40 60 80 100 Q [m3/h] 0 20 40 60 80 100 Q [m3/h]
P2 [kW] P2 [kW]
20
Ø225 25
Ø205
15 20
10 15
Ø170
Ø170 10
5
5
0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
P1 [kW] P1 [kW]
25 25
Ø205
20 Ø225 20
15 15 Ø170
10 10
Ø170
5 5
0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]
η [%] η [%]
70 70
60 Ø225 60 Ø195
50 Ø170 50 Ø170
40 40
30 30
20 20
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 Q [l/s]

AL-1102/4 ALH-1102/4 ALP-1102/4 ALS-1102/4

KH-100 A2 F19 0,55 1,27 55 335
KH-100 B2 F19 0,75 1,74 55 335
50Hz
KH-101 C2 F19 1,1 2,44 60 385
KH-101 D2 F19 1,5 3,27 63 385
KH-112 C2 F19 2,2 4,60 69 430
KH-101 C2 F19 1,1 (1,3) 2,43 (2,43) 60 385
60Hz
KH-101 D2 F19 1,5 (1,8) 3,23 (3,32) 63 385
KH-112 C2 F19 2,2 (2,6) 4,55 (4,60) 69 430
KH-112 E2 F19 3 (3,6) 6,15 (6,25) 72 430
4
12 12 18 9
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
16 8
10 10
14 NPSH 7
Ø188
8 8 12 6
10 5
6 6
NPSH
Ø188 8 4
4 4 6 3
4 2
2 2
2 1
0 0 0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 35
Q [l/s]
0 20 40 60 80 100 Q [m3/h] 0 20 40 60 80 100 120 Q [m3/h]
P2 [kW] P2 [kW]
2,5 4
Ø188 Ø188
2,0
3
1,5
2
1,0
0,5 1 Ø133
Ø133
0,0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]
P1 [kW] P1 [kW]
3,0 5
Ø188
2,5 4 Ø188
2,0
3
1,5
2
1,0
0,5 Ø133 1 Ø133
0,0 0
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø188 60
50 50 Ø188
40 40
30 Ø133 30 Ø133
20 20
0 5 10 15 20 25 30 Q [l/s] 0 5 10 15 20 25 30 35 Q [l/s]

AL-1102/2 ALH-1102/2 ALP-1102/2 ALS-1102/2

KH-112 E1 F19 4 7,95 73 430
50Hz
KH-132 C1 F19 5,5 10,2 98 490
KH-132 E1 F19 7,5 13,75 105 490
60Hz
KH-132 C1 F19 5,5 (6,6) 10,25 (10,40) 98 490
KH-132 E1 F19 7,5 (9) 13,80 (14,05) 105 490
4
30 12 40 16
35 14
25 NPSH 10
Ø149
30 12
20 8
25 10
15 6 20 8
NPSH
15 Ø138 6
10 4
10 4
5 2
5 2
0 0 0 0
0 5 10 15 20 25 30 35 40 Q [l/s] 0 5 10 15 20 25 30 35 40 45 Q [l/s]
Q [m3/h] Q [m3/h]
0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160
P2 [kW] P2 [kW]
12
8
Ø149 10 Ø138
6 8
6 Ø128
4 Ø128
4
2 2
0 0
0 5 10 15 20 25 30 35 40 Q [l/s] 0 5 10 15 20 25 30 35 40 45 Q [l/s]
P1 [kW] P1 [kW]
9 12
8 Ø149 10 Ø138
7
6 8 Ø128
5 6
4 Ø128
3 4
2 2
1
0 0
0 5 10 15 20 25 30 35 40 Q [l/s] 0 5 10 15 20 25 30 35 40 45 Q [l/s]
η [%] η [%]
80 80
70 70
Ø138
60 60
50 Ø149 50
40 40
Ø128 Ø128
30 30
20 20
0 5 10 15 20 25 30 35 40 Q [l/s] 0 5 10 15 20 25 30 35 40 45 Q [l/s]
04/2013 Subject to change without

www.kolmeks.fi Subjectprior notice.without prior notice
to change 111 www.kolmeks.com
19.07.2012
AKN-100/4 AKNH-100/4

KH-101 D2 N26 1,5 3,27 83 365
50Hz
KH-112 C2 N26 2,2 4,60 89 410
KH-112 E2 N26 3 6,25 93 410
KH-101 D2 N26 1,5 (1,8) 3,23 (3,32) 83 365
60Hz
KH-112 C2 N26 2,2 (2,6) 4,55 (4,60) 89 410
KH-112 E2 N26 3 (3,6) 6,15 (6,25) 93 410
4 14
H [m]
1 m/s 2 m/s 3 m/s
NPSH [m]
4 m/s
14 16
H [m]
1 m/s 2 m/s 3 m/s
NPSH [m]
4 m/s
24
12 12 14 21
12 18
10 10
NPSH
Ø210 10 15
8 8
NPSH
8 12
Ø190
6 6
6 9
4 4
4 6
2 2 2 3
0 0 0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
Q [l/s] Q [l/s]
0 20 40 60 80 100 120 Q [m3/h] 0 20 40 60 80 100 120 Q [m3/h]
P2 [kW] P2 [kW]
3,0 4
2,5 Ø210 Ø190
3
2,0
1,5 2
1,0 Ø150
Ø150 1
0,5
0,0 Q [l/s] 0 Q [l/s]
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
P1 [kW] P1 [kW]
4 5
Ø210 4 Ø190
3
3
2
2
Ø150
1 Ø150 1
0 0
Q [l/s] Q [l/s]
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
η [%] η [%]
80 80
70 70
60 60
50 50
40 Ø210 40
30 30 Ø190
20 Ø150 20 Ø150
10 10
0 Q [l/s] 0 Q [l/s]
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35

AKN-100/2 AKNH-100/2

KH-132 E1 N26 7,5 13,75 125 465
KZ-165 E1 N26 11 20,20 185 640
50Hz
KZ-165 F1 N26 15 26,95 190 640
KZ-165A H1 N26 18,5 32,60 205 640
KZ-186 J1 N26 22 38,60 250 710
KZ-165 E1 N26 11 (13) 20,60 (20,30) 185 640
60Hz
KZ-165 F1 N26 15 (18) 28,05 (27,90) 190 640
KZ-165A H1 N26 18,5 (22) 33,90 (33,60) 205 640
KZ-186 J1 N26 22 (26) 40,30 (39,60) 250 710

60 12 70 14
NPSH
60 Ø200 12
50 10
NPSH
Ø210
50 10
40 8
40 8
30 6
30 6
20 4
20 4
10 2
10 2
0 0 0 0
0 10 20 30 40 50 Q [l/s] 0 10 20 30 40 50 60 Q [l/s]
0 50 100 150 Q [m3/h] 0 50 100 150 200 Q [m3/h]
P2 [kW] P2 [kW]
25 30
Ø210 25 Ø190
20
20
15
15
10 Ø150
10
5 Ø150
5
0 Q [l/s] 0 Q [l/s]
0 10 20 30 40 50 0 10 20 30 40 50 60
P1 [kW] P1 [kW]
25 30 Ø190
Ø210 25
20
20
15
15
10 Ø150
Ø150 10
5 5
0 Q [l/s] 0 Q [l/s]
0 10 20 30 40 50 0 10 20 30 40 50 60
η [%] η [%]
70 Ø210 70
60 60 Ø180
50 50
40 40
30 Ø150 30 Ø150
20 Q [l/s] 20 Q [l/s]
0 10 20 30 40 50 0 10 20 30 40 50 60

AL-1106/4 ALH-1106/4 ALS-1106/4

KH-112 E2 F31 3 6,25 126 430
50Hz
KH-132 C2 F31 4 8,13 153 495
KH-132 E2 F31 5,5 10,95 160 495
KH-133 G2 F31 7,5 14,88 172 550
KH-112 E2 F31 3 (3,6) 6,15 (6,25) 126 430
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 153 495
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 160 495
60Hz
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 172 550
KZ-165 F2 F31 11 (13) 21,35 (21,35) 230 655
KZ-165 G2 F31 15 (18) 29,10 (28,75) 235 655
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 275 715

30 18 40 24
35 21
25 NPSH 15
NPSH
Ø288 Ø28818
30
20 12
25 15
15 9 20 12
15 9
10 6
10 6
5 3
5 3
0 0 0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 40 Q [l/s]
Q [m3/h]
0 20 40 60 80 100 120 Q [m3/h] 0 20 40 60 80 100 120 140
P2 [kW] P2 [kW]
8 14
Ø288 12 Ø288
6 10
8
4
6
2 4
Ø180 2 Ø180
0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 40 Q [l/s]
P1 [kW] P1 [kW]
9 16
8 Ø288 14
7 Ø288
12
6 10
5
4 8
3 6
2 4
Ø180 2 Ø180
1
0 0
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 40 Q [l/s]
η [%] η [%]
70 70
60 60
50 50 Ø288
Ø288
40 40 Ø180
Ø180
30 30
20 20
0 5 10 15 20 25 30 35 Q [l/s] 0 5 10 15 20 25 30 35 40 Q [l/s]

L-100S/4 LH-100S/4 LP-100S/4

KH-112 E2 F31 3 6,25 140 440
KH-132 C2 F31 4 8,13 165 510
50Hz
KH-132 E2 F31 5,5 10,95 175 510
KH-133 G2 F31 7,5 14,88 185 560
KZ-165 F2 F31 11 20,75 240 670
KZ-165 G2 F31 15 28,10 245 670
KH-112 E2 F31 3 (3,6) 6,15 (6,25) 140 440
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 165 510
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 175 510
60Hz
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 185 560
KZ-165 F2 F31 11 (13) 21,35 (21,35) 240 670
KZ-165 G2 F31 15 (18) 29,10 (28,75) 245 670
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 290 730
KZ-186 K2 BF31 22 (26) 41,60 (41,00) 300 730
35
H [m]
1 m/s 2 m/s 3 m/s 4 m/s
NPSH [m]
5 m/s
35 50
H [m]
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s

NPSH [m]
NPSH
25 4
45 Ø315 22,5
30 30
40 20
25 25 35 17,5
NPSH
Ø315 20 30 15
20
25 12,5
15 15
20 10
10 10 15 7,5
NPSH 10 5
5 Ø180 5
5 2,5
NPSH
0 0 0 Ø180 0
0 5 10 15 20 25 30 35 40 45 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
Q [m3/h]
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 Q [m3/h]
P2 [kW] P2 [kW]
14 25
12 Ø315 Ø315
20
10
8 15
6 10
4
2 5
0 Ø180 0 Ø180
0 5 10 15 20 25 30 35 40 45 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
P1 [kW] P1 [kW]
16 25
Ø315
14 Ø315 20
12
10 15
8
6 10
4 5
2 Ø180 Ø180
0 0
0 5 10 15 20 25 30 35 40 45 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø315 60 Ø315
50 50
40 40
Ø180 Ø180
30 30
20 20
0 5 10 15 20 25 30 35 40 45 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]

L-100S/2 LH-100S/2 LP-100S/2

KZ-165 F1 F31 15 26,95 235 670
KZ-165A H1 F31 18,5 32,6 240 670
50Hz
KZ-186 J1 BF31 22 38,6 295 730
KZ-205 H1 F31 30 53,5 340 780
KZ-205 J1 F31 37 65,6 360 780
KZ-225 H1 F32 45 77,7 430 830
KZ-165 F1 F31 15 (18) 28,05 (27,9) 235 670
KZ-165A H1 F31 18,5 (22) 33,9 (33,6) 240 670
60Hz
KZ-186 J1 BF31 22 (26) 40,3 (39,6) 295 730
KZ-205 H1 F31 30 (36) 55,8 (55,6) 340 780
KZ-205 J1 F31 37 (44) 68,3 (66,8) 360 780
KZ-225 H1 F32 45 (54) 80,8 (81,0) 430 830

80 20 120 30
NPSH
70 Ø247
100 25
60 15
NPSH
80 Ø240 20
50
40 10 60 15
30
NPSH 40 10
Ø180 NPSH
20 5
Ø180
20 5
10
0 0 0 0
0 10 20 30 40 50 60 70 Q [l/s] 0 10 20 30 40 50 60 70 80 Q [l/s]
Q [m3/h]
0 50 100 150 200 250 0 50 100 150 200 250 Q [m3/h]
P2 [kW] P2 [kW]
50 60
Ø247 Ø240
40 50
40
30
30
20 Ø180
20
10 Ø180
10
0 0
0 10 20 30 40 50 60 70 Q [l/s] 0 10 20 30 40 50 60 70 80 Q [l/s]
P1 [kW] P1 [kW]
60 70
50 Ø247 60 Ø240
40 50
40
30
30
20 20 Ø180
10 Ø180
10
0 0
0 10 20 30 40 50 60 70 Q [l/s] 0 10 20 30 40 50 60 70 80 Q [l/s]
η [%] η [%]
80 80
70 70
Ø247 Ø220
60 60
50 Ø180 50 Ø180
40 40
30 30
20 20
0 10 20 30 40 50 60 70 Q [l/s] 0 10 20 30 40 50 60 70 80 Q [l/s]

AKN-127/4 AKNH-127/4
50Hz
KH-132 C2 N27 4 8,13 135 470
KH-132 E2 N27 5,5 10,95 145 470
KH-132 C2 N27 4 (4,8) 8,17 (8,30) 135 470
60Hz
KH-132 E2 N27 5,5 (6,6) 11,00 (11,15) 145 470
KH-133 G2 N27 7,5 (9) 14,8 (15,47) 157 520
KZ-165 F2 N27 11 (13) 21,35 (21,35) 170 660

4
18 18 26 22
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
24 20
16 16
22
18
14 14 20
16
18
12 12
16 14
NPSH
10 NPSH 10 Ø235 12
Ø235 14
8 8 12 10
10 8
6 6
8
6
4 4 6
4
4
2 2 2
2
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
175 Q [m /h]
3
0 25 50 75 100 125 150 0 50 100 150 Q [m3/h]
P2 [kW] P2 [kW]
7 10
6 Ø235
Ø235 8
5
4 6
3 4
2 Ø180
Ø180 2
1
0 0
0 5 10 15 20 25 30 35 40 45 50 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
P1 [kW] P1 [kW]
7 12
6 Ø235 Ø235
5 8
4
3
2 Ø180 4 Ø180
1
0 0
0 5 10 15 20 25 30 35 40 45 50 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
η [%] η [%]
80 80
70 70
60 60
50 50
Ø235 Ø235
40 40
30 30
20 Ø180 20 Ø180
0 5 10 15 20 25 30 35 40 45 50 Q [l/s] 0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]

AKN-127/2 AKNH-127/2

KZ-165 E1 N27 11 20,2 200 650
50Hz
KZ-165 F1 N27 15 26,95 205 650
KZ-165A H1 N27 18,5 32,6 210 650
KZ-186 J1 N27 22 38,6 265 720
KZ-165 F1 N27 15 (18) 28,05 (27,9) 205 650
60Hz
KZ-165A H1 N27 18,5 (22) 33,9 (33,6) 210 650
KZ-186 J1 N27 22 (26) 40,3 (39,6) 265 720

55 11 55 22
1 m/s 2 m/s 3 m/s 4 m/s NPSH 1 m/s 2 m/s 3 m/s 4 m/s 5 m/s
50 Ø190 10 50 20
45 9 45 18
40 8 40 16
35 7 35 14
NPSH
30 6 30 Ø185 12
25 5 25 10
20 4 20 8
15 3 15 6
10 2 10 4
5 1 5 2
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 0 10 20 30 40 50 60 70 Q [l/s]
Q [l/s] Q [m3/h]
0 50 100 150 200 Q [m3/h] 0 50 100 150 200 250
P2 [kW] P2 [kW]
25 30
Ø210 25 Ø185
20
20 Ø165
15
15
10 Ø160 10
5 5
0 Q [l/s] 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 0 10 20 30 40 50 60 70 Q [l/s]
P1 [kW] P1 [kW]
25 Ø210 35
30 Ø185
20
25
15 20 Ø165
10 Ø160 15
10
5 5
0 Q [l/s] 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 0 10 20 30 40 50 60 70 Q [l/s]
η [%] η [%]
80 80
70 Ø210 70 Ø180
60 60
50 Ø160 50 Ø165
40 40
30 30
20 Q [l/s] 20
0 5 10 15 20 25 30 35 40 45 50 55 60 65 0 10 20 30 40 50 60 70 Q [l/s]

AL-1129/4 ALH-1129/4 ALS-1129/4 ALM-1129/4

KH-112 E2 F31 3 6,25 136 440
KH-132 C2 F31 4 8,13 164 500
50Hz
KH-132 E2 F31 5,5 10,95 171 500
KH-133 G2 F31 7,5 14,88 183 550
KZ-165 F2 F31 11 20,75 240 660
KZ-165 G2 F31 15 28,10 245 660
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 164 500
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 171 500
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 183 550
60Hz
KZ-165 F2 F31 11 (13) 21,35 (21,35) 240 660
KZ-165 G2 F31 15 (18) 29,10 (28,75) 245 660
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 285 720
KZ-186 K2 BF32 22 (26) 41,60 (41,00) 295 720

30 12 45 18
40 16
25 10
35 14
20 NPSH 8 30 12
Ø288
NPSH
25 Ø288 10
15 6
20 8
10 4 15 6
10 4
5 2
5 2
0 0 0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
0 50 100 150 200 Q [m3/h] 0 50 100 150 200 250 Q [m3/h]
P2 [kW] P2 [kW]
14 25
Ø288 Ø288
12 20
10
8 15
6 10
4
2 5
Ø167 Ø167
0 0 Q [l/s]
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70
P1 [kW] P1 [kW]
16 30
14 Ø288 25 Ø288
12
10 20
8 15
6 10
4
2 Ø167 5 Ø167
0 0 Q [l/s]
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70
η [%] η [%]
80 80
70 Ø288 70 Ø288
60 60
50 Ø167 50 Ø167
40 40
30 30
20 20
10 10
0 0 Q [l/s]
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70

AL-1129/2 ALH-1129/2 ALS-1129/2 ALM-1129/2
50Hz
KZ-205 H1 F31 30 53,5 340 770
KZ-205 J1 F31 37 65,6 365 770
4 50 Hz 3000r/min DN 125
H [m] NPSH [m]
70 14
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s 6 m/s
60 12
50 NPSH 10
Ø214
40 8
30 6
20 4
10 2
0 0
0 10 20 30 40 50 60 70 80 Q [l/s]
0 50 100 150 200 250 Q [m3/h]
P2 [kW]
40
Ø214
30
Ø183
20
10
0 Q [l/s]
0 10 20 30 40 50 60 70 80
P1 [kW]
40
Ø214
30
Ø183
20
10
0 Q [l/s]
0 10 20 30 40 50 60 70 80
η [%]
80
70 Ø214
60
Ø183
50
40
30
20
10
0 Q [l/s]
0 10 20 30 40 50 60 70 80

ALP-1128/4

KH-112 E2 F31 3 6,25 136 435
KH-132 C2 F31 4 8,13 164 500
50Hz
KH-132 E2 F31 5,5 10,95 171 500
KH-133 G2 F31 7,5 14,88 183 550
KZ-165 F2 F31 11 20,75 240 660
KZ-165 G2 F31 15 28,10 245 660
KH-112 E2 F31 3 (3,6) 6,15 (6,25) 136 435
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 164 500
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 171 500
60Hz
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 183 550
KZ-165 F2 F31 11 (13) 21,35 (21,35) 240 660
KZ-165 G2 F31 15 (18) 29,10 (28,75) 245 660
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 285 720
KZ-186 K2 BF31 22 (26) 41,60 (41,00) 295 720

30 12 45 18
40 16
25 10
35 14
20 NPSH 8 30 12
Ø288 NPSH
Ø288
25 10
15 6
20 8
10 4 15 6
10 4
5 2
5 2
0 0 0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
Q [m3/h]
0 50 100 150 200 Q [m 3/h] 0 50 100 150 200 250
P2 [kW] P2 [kW]
16 25
14 Ø288 Ø288
12 20
10 15
8
6 10
4 5
2 Ø167 Ø167
0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
P1 [kW] P1 [kW]
16 25 Ø288
14 Ø288
12 20
10 15
8
6 10
4 5
2 Ø167 Ø167
0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
η [%] η [%]
80 80
70 70 Ø288
Ø288
60 60
50 50 Ø167
Ø167
40 40
30 30
20 20
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]

ALP-1128/2
50Hz
KZ-205 H1 F31 30 53,5 340 770
KZ-205 J1 F31 37 65,6 360 770
4 50 Hz 3000r/min DN 125
H [m] NPSH [m]
70 14
1 m/s 2 m/s 3 m/s 4 m/s 5 m/s 6 m/s
60 12
50 NPSH 10
Ø214
40 8
30 6
20 4
10 2
0 0
0 10 20 30 40 50 60 70 80 Q [l/s]
0 50 100 150 200 250 Q [m3/h]
P2 [kW]
40
Ø214
30
Ø183
20
10
0
0 10 20 30 40 50 60 70 80 Q [l/s]
P1 [kW]
40 Ø214
30
Ø183
20
10
0
0 10 20 30 40 50 60 70 80 Q [l/s]
η [%]
80
70 Ø214
60 Ø183
50
40
30
20
0 10 20 30 40 50 60 70 80 Q [l/s]

L-125S/4 LH-125S/4 LS-125S/4

KZ-186 G2 F41 18,5 34,4 340 730
KZ-186 K2 F41 22 40,3 350 730
50Hz
KZ-205 K2 F41 30 55,2 405 800
KZ-224 J2 F41 37 67,0 455 800
KZ-225 K2 F42 45 81,1 485 830
KZ-186 G2 F41 18,5 (22) 35,3 (35,1) 340 730
KZ-186 K2 F41 22 (26) 41,6 (41,0) 350 730
60Hz
KZ-205 K2 F41 30 (36) 57,6 (57,1) 405 800
KZ-224 J2 F41 37 (44) 69,5 (68,6) 455 800
KZ-225 K2 F42 45 (54) 84,0 (83,8) 485 830
KZ-256 J2 F42 55 (66) 102,1 (100,9) 570 870

60 24 90 36
NPSH
Ø415 80 32
50 20
70 NPSH 28
Ø415
40 16 60 24
50 20
30 12
40 16
20 8 30 12
20 8
10 NPSH 4
Ø255 10 4
0 0 0 0
0 10 20 30 40 50 60 70 80 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
0 50 100 150 200 250 Q [m3/h] 0 50 100 150 200 250 300 350 Q [m3/h]
P2 [kW] P2 [kW]
50 70 Ø415
Ø415 60
40 50
30 40
30
20
20 Ø255
10 Ø255 10
0 0
0 10 20 30 40 50 60 70 80 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
P1 [kW] P1 [kW]
50 80
Ø415 70 Ø415
40 60
30 50
40
20 30
10 Ø255 20 Ø255
10
0 0
0 10 20 30 40 50 60 70 80 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø415 60 Ø395
50 50 Ø255
Ø255
40 40
30 30
20 20
0 10 20 30 40 50 60 70 80 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]

ALP-1153/6
50Hz
KH-133 G3 F31 5,5 12,30 200 550
KH-133 G3 F31 5,5 (6,6) 11,53 (12,18) 200 550
60Hz
KZ-165 G3 F31 7,5 (9) 16,30 (17,40) 250 660
KZ-165 G3 F31 11 (13) 22,90 (23,20) 250 660

12 12 18 18
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s
16 16
10 10
NPSH 14 14
Ø292
12 NPSH 12
8 8
Ø292
10 10
6 6
8 8
4 4 6 6
4 4
2 2
2 2
0 0 0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
Q [m3/h]
0 50 100 150 200 Q [m3/h] 0 50 100 150 200 250
P2 [kW] P2 [kW]
6 10
5 Ø292 Ø292
8
4
6
3
4
2 Ø222
Ø222
1 2
0 Q [l/s] 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 Q [l/s]
P1 [kW] P1 [kW]
6 Ø292 12
5 10 Ø292
4 8
3 6
2 Ø222 4 Ø222
1 2
0 Q [l/s] 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø292 60 Ø292
50 Ø222 50
Ø222
40 40
30 30
20 20
Q [l/s]
0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 Q [l/s]

ALP-1153/4

KH-132 C2 F31 4 8,13 177 500
KH-132 E2 F31 5,5 10,95 184 500
50Hz
KH-133 G2 F31 7,5 14,88 196 550
KZ-165 F2 F31 11 20,75 250 660
KZ-165 G2 F31 15 28,1 255 660
KZ-186 G2 BF31 18,5 34,4 295 720
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 177 500
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 184 500
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 196 550
60Hz
KZ-165 F2 F31 11 (13) 21,35 (21,35) 250 660
KZ-165 G2 F31 15 (18) 29,10 (28,75) 255 660
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 295 720
KZ-186 K2 BF31 22 (26) 41,60 (41,00) 310 720
KZ-205 K2 F31 30 (30) 57,60 (57,60) 370 780

30 12 40 18
NPSH 16
35
25 Ø292 10
NPSH 14
30 Ø292
20 8 12
25
10
15 6 20
8
15
10 4 6
10
4
5 2
5 2
0 0 0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
0 50 100 150 200 250 300 Q [m3/h] 0 50 100 150 200 250 300 350 Q [m3/h]
P2 [kW] P2 [kW]
20 30
Ø292
Ø292 25
15
20
10 15
10
5 Ø204
Ø204 5
0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
P1 [kW] P1 [kW]
20 35
Ø292 30 Ø292
15 25
20
10
15
5 10
Ø204 Ø204
5
0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø292 60 Ø292
50 50
40 Ø204 40 Ø204
30 30
20 20
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]

AL-1154/6 ALH-1154/6 ALS-1154/6 ALM-1154/6
50Hz
KH-133 G3 F31 5,5 12,30 200 550
KH-133 G3 F31 5,5 (6,6) 11,53 (12,18) 200 550
60Hz
KZ-165 G3 F31 7,5 (9) 16,30 (17,40) 250 660
KZ-165 G3 F31 11 (13) 22,90 (23,20) 250 660

12 12 18 18
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s
16 16
10 10
NPSH 14 14
Ø292
12 NPSH 12
8 8
Ø292
10 10
6 6
8 8
4 4 6 6
4 4
2 2
2 2
0 0 0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
0 50 100 150 200 Q [m3/h] 0 50 100 150 200 250 Q [m3/h]
P2 [kW] P2 [kW]
6 10
5 Ø292 Ø292
8
4
6
3
4
2 Ø222
Ø222 2
1
0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
P1 [kW] P1 [kW]
6 Ø292 12
5 10 Ø292
4 8
3 6
2 Ø222 4 Ø222
1 2
0 0
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø292 60 Ø292
50 50
Ø222 Ø222
40 40
30 30
20 20
0 10 20 30 40 50 60 Q [l/s] 0 10 20 30 40 50 60 70 Q [l/s]

AL-1154/4 ALH-1154/4 ALS-1154/4 ALM-1154/4

KH-132 C2 F31 4 8,13 177 500
KH-132 E2 F31 5,5 10,95 184 500
50Hz
KH-133 G2 F31 7,5 14,88 196 550
KZ-165 F2 F31 11 20,75 250 660
KZ-165 G2 F31 15 28,10 255 660
KZ-186 G2 BF31 18,5 34,40 295 720
KH-132 C2 F31 4 (4,8) 8,17 (8,30) 177 500
KH-132 E2 F31 5,5 (6,6) 11,00 (11,15) 184 500
KH-133 G2 F31 7,5 (9) 14,80 (15,47) 196 550
60Hz
KZ-165 F2 F31 11 (13) 21,35 (21,35) 250 660
KZ-165 G2 F31 15 (18) 29,10 (28,75) 255 660
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 295 720
KZ-186 K2 BF31 22 (26) 41,60 (41,00) 310 720
KZ-205 K2 F31 30 (30) 57,60 (57,10) 370 780

4
30 12 40 16
NPSH 35 NPSH14
25 Ø292 10 Ø292
30 12
20 8
25 10
15 6 20 8
15 6
10 4
10 4
5 2
5 2
0 0 0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
0 50 100 150 200 250 300 Q [m3/h] 0 50 100 150 200 250 300 350 Q [m3/h]
P2 [kW] P2 [kW]
20 30
Ø292
Ø292 25
15
20
10 15
10
5 Ø204
Ø204 5
0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
P1 [kW] P1 [kW]
20 35
Ø292 30 Ø292
15 25
20
10 15
5 10
Ø204 Ø204
5
0 0
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]
η [%] η [%]
80 80
70 70
60 Ø292 60 Ø292
50 50
40 Ø204 40 Ø204
30 30
20 20
0 10 20 30 40 50 60 70 80 90 Q [l/s] 0 10 20 30 40 50 60 70 80 90 100 Q [l/s]

AL-1202/6 ALH-1202/6 ALP-1202/6 ALS-1202/6 ALM-1202/6

KH-133 G3 F31 4 10,2 275 610
50Hz
KH-133 G3 F31 5,5 12,3 275 610
KZ-165 G3 F31 7,5 17,7 320 720
KZ-165 G3 F31 11 23,3 320 720
KH-133 G3 F31 4 (4,8) 9,89 (10,28) 275 610
KH-133 G3 F31 5,5 (6,6) 11,53 (12,18) 275 610
60Hz
KZ-165 G3 F31 7,5 (9) 16,30 (17,40) 320 720
KZ-165 G3 F31 11 (13) 22,00 (23,20) 320 720
KZ-205 G3 F32 15 (18,5) 30,80 (31,30) 440 830
KZ-205 G3 F32 18,5 (22) 37,40 (36,00) 440 830
4
H [m] H [m]
14 20
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s 4 m/s
12
16
10
12
8
6
8
4
4
2
0 Q [l/s] 0 Q [l/s]
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140
Q [m3/h]
0 50 100 150 200 250 300 350 400 Q [m 3/h] 0 100 200 300 400 500
P2 [kW] P2 [kW]
12 20
Ø315 Ø315
10 16
8
12
6
8
4
2 Ø220 4 Ø220
0 Q [l/s] 0 Q [l/s]
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140
P1 [kW] P1 [kW]
14 24
12 Ø315 20 Ø315
10 16
8
12
6
4 8
Ø220 Ø220
2 4
0 Q [l/s] 0 Q [l/s]
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140
η [%] η [%]
80 80
70 Ø315 70 Ø315
60 60
50 50
Ø220 Ø220
40 40
30 30
20 Q [l/s] 20 Q [l/s]
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140

AL-1202/4 ALH-1202/4 ALP-1202/4 ALS-1202/4 ALM-1202/4

KZ-165 G2 F31 15 28,1 325 720
KZ-186 G2 BF31 18,5 34,4 365 780
50Hz
KZ-186 K2 BF32 22 40,3 380 780
KZ-205 K2 F32 30 55,2 435 830
KZ-224 J2 F32 37 67,0 485 840
KZ-186 G2 BF31 18,5 (22) 35,30 (35,10) 365 780
KZ-186 K2 BF32 22 (26) 41,60 (41,00) 380 780
60Hz
KZ-205 K2 F32 30 (36) 57,60 (57,10) 435 830
KZ-224 J2 F32 37 (44) 69,50 (68,60) 485 840
KZ-225 K2 F33 45 (54) 84,00 (83,80) 510 880

4
30 12 45 18
NPSH
Ø315 40 16
25 10
35 NPSH 14
Ø305
20 8 30 12
25 10
15 6
20 8
10 4 15 6
10 4
5 2
5 2
0 0 0 0
0 20 40 60 80 100 120 140 160 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
0 100 200 300 400 500 Q [m 3/h] 0 100 200 300 400 500 600 700 Q [m3/h]
P2 [kW] P2 [kW]
40 60
Ø315 Ø315 Ø305
50
30
40
20 30
Ø242 20 Ø242
10
10
0 Q [l/s] 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
P1 [kW] P1 [kW]
40 70
Ø315
60 Ø315
30 50
20 40
30
Ø242 Ø242
10 20
10
0 Q [l/s] 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
η [%] η [%]
80 80 Ø315
70 Ø315 70
60 60
50 Ø242 50 Ø242
40 40
30 30
20 Q [l/s] 20
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]

AL-1250/6 ALH-1250/6 ALP-1250/6 ALS-1250/6

KZ-205 G3 F41 15 29,7 540 880
50Hz
KZ-205 G3 F41 18,5 36,4 540 880
KZ-205 H3 F41 22 42,1 550 880
KZ-225 G3 F42 30 56,2 620 900
KZ-205 G3 F41 18,5 (22) 37,4 (36,0) 540 880
60Hz
KZ-205 H3 F41 22 (26) 43,4 (42,5) 550 880
KZ-225 G3 F42 30 (36) 58,3 (57,8) 620 900
4
50 Hz 1000r/min DN 250 60 Hz 1200r/min DN250
25 20 30 24
1 m/s 2 m/s 3 m/s 1 m/s 2 m/s 3 m/s
NPSH 25 20
20 Ø415 16
NPSH
20 Ø380 16
15 12
15 12
10 8
10 8
5 4
5 4
0 0 0 0
0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 200
Q [l/s] Q [l/s]
0 100 200 300 400 500 600 0 100 200 300 400 500 600 700
Q [m3/h] Q [m3/h]
P2 [kW] P2 [kW]
40
30 Ø415 Ø380
30
20
20 Ø300
10 Ø300
10
0 Q [l/s] 0
0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
P1 [kW] P1 [kW]
40 40
Ø380
Ø415 30
30
20 20 Ø300
10 Ø300 10
0 Q [l/s] 0
0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
η [%] η [%]
80 80
70 70
Ø415 Ø360
60 60
50 Ø300 50 Ø300
40 40
30 30
20 Q [l/s] 20
0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 200 Q [l/s]
www.kolmeks.fi All rights reserved 19.07.2012

AL-1250/4 ALH-1250/4 ALP-1250/4 ALS-1250/4 ALM-1250/4

KZ-224 J2 F41 37 67,0 580 880
KZ-225 K2 F42 45 81,1 610 900
50Hz
KZ-256 J2 F42 55 98,7 690 950
KZ-287 J2 F43 75 133,9 850 1020
KZ-288 K2 F43 90 158,5 920 1070
KZR-314 H2 F43 110 193,2 1210 1330
KZ-225 K2 F42 45 (54) 84,0 (83,8) 610 900
KZ-256 J2 F42 55 (66) 102,1 (100,9) 690 950
60Hz
KZ-287 J2 F43 75 (90) 138,6 (139,0) 850 1020
KZ-288 K2 F43 90 (105) 156,2 (159,6) 920 1070
KZR-314 H2 F43 110 (132) 199,9 (198,2) 1210 1330

4
60 22 70 28
55 20
60 24
50 NPSH 18
45 Ø395
16 50 NPSH 20
40 Ø380
14
35 40 16
12
30
10
25 30 12
8
20
6 20 8
15
10 4
10 4
5 2
0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
Q [m3/h]
0 100 200 300 400 500 600 700 800 900 Q [m3/h] 0 200 400 600 800 1000
P2 [kW] P2 [kW]
100 Ø415 140 Ø380
80 120
100
60 80
40 60 Ø300
Ø300 40
20 20
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
P1 [kW] P1 [kW]
120
140 Ø380
100 Ø415 120
80 100
60 80
60 Ø300
40 Ø300 40
20 20
0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]
η [%] η [%]
90 90
80 80
70 70 Ø380
Ø395
60 60
Ø300 Ø300
50 50
40 40
30 30
0 20 40 60 80 100 120 140 160 180 200 220 240 260 Q [l/s] 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [l/s]

AL-1300/4 ALH-1300/4 ALS-1300/4

KZR-314 H2 F53 110 193,20 1470 1360
50Hz
KZR-316 J2 F53 132 231,20 1590 1470
KZR-316 K2 F53 160 279,70 1660 1470
KZR-314 H2 F53 110 (132) 199,9 (198,2) 1470 1360
60Hz
KZR-316 J2 F53 132 (158) 242,6 (242,5) 1590 1470
KZR-316 K2 F53 160 (190) 290,5 (287,3) 1660 1470
4
H [m] NPSH [m] 100 H [m] NPSH [m] 20
90 18 1 m/s 2 m/s 3 m/s
1 m/s 2 m/s 3 m/s 4 m/s
NPSH
90
80 16 Ø440
80 16
70 NPSH 14
Ø480 70
60 12
60 NPSH 12
50 10 Ø440
50
40 8
40 8
30 6
30
20 4 20 4
10 2 10
0 0 0 0
0 50 100 150 200 250 300 Q [l/s] 0 50 100 150 200 250 300 Q [l/s]
0 200 400 600 800 1000 Q [m3/h] 0 200 400 600 800 1000 Q [m3/h]
P2 [kW] P2 [kW]
180 200
160 Ø480 Ø440
140 160
120 Ø360
100 120
80 Ø360 80
60
40 40
20
0 0 Q [l/s]
0 50 100 150 200 250 300 Q [l/s] 0 50 100 150 200 250 300
P1 [kW] P1 [kW]
180 240
160 Ø480
200 Ø440
140
120 160
100 120 Ø360
80 Ø360
60 80
40 40
20
0 0 Q [l/s]
0 50 100 150 200 250 300 Q [l/s] 0 50 100 150 200 250 300
η [%] η [%]
80 80
Ø480
70 70
60 60
Ø400
50 Ø360 50 Ø360
40 40
30 30 Q [l/s]
0 50 100 150 200 250 300 Q [l/s] 0 50 100 150 200 250 300

LOREM IPSUM JE ZULT SC-INLINE DOMESTIC HOT WATER PUMPS - AEP, LP and ALP
MAAR 60 HZ
m Head
35
Ø144
30
25
NPSH
Ø138
m
4
20 8
14
Ø
15 6
Ø133
10 4
Ø128
5 2
0
0 5 10 15 20 25 30 35 40 l/s
Flow
3
0 20 40 60 80 100 120 140 m/h
kW Shaft power P2
10 Ø144
9 Ø138
8 Ø133
7
6 Ø128
5
4
3
2
1
0
0 5 10 15 20 25 30 35 40 l/s
PUMP ACCESSORIES, SPECIAL
kW
11
Ø144 Ø138
SURFACE TREATMENTS AND
10
9
Ø133 DOCUMENTATION
8 Ø128
7
6
5
4
3
2
1
0
0 10
04/2013 5Subject to change 15
without 20
prior notice. 25 30 35 235 40 l/s www.kolmeks.com
www.kolmeks.com
ACCESSORIES
Seal constructions and materials

1. Single mechanical seals
Standard construction Internal flushing External flushing
Standard materials for single mechanical seal (Series No 7)
Rotating ring Carbon

Stationary ring Silicon carbide or ceramic (depending on seal size / pump type)
Elastomers EPDM or Viton (depending on seal size / pump type)
Metal parts Stainless steel AISI 304 (10–12mm seals)
Stainless steel AISI 316 (over 12mm seals)
Material suitability for different liquids

Rotating ring/Stationary ring Liquid Liquid temperature range
Carbon/Ceramic Water max. +120°C, standard construction
Carbon/Silicon carbide Water 0 … +120°C, standard construction

Water 0 … +150°C, with internal flushing
Freezium (refrigeration system) -15 … +40°C, standard construction
Glycol (refrigeration system) -15 … +40°C, standard construction
Rotating ring/Stationary ring Liquid to be pumped Temperature range of liquid

Silicon carbide/Silicon carbide Erosive liquids -15 … +120°C, standard construction
-15 … +150°C, internal flushing
Calcium chloride (saline solution) -15 … +30°C, standard construction
Antimony carbon/Silicon carbide Demineralised water 0 … +120°C, standard construction
Rubber materials: suitability for different liquids
Rubber EPDM - mostly used
8

- -40°C-+150°C ( +180°C double mech. seal)
- water, freezium, glycol, calciumchloride
- note! not oil resistant!
NITRIL - -40°C-+90°C
- oil resistant
VITON -20°C-+200°C
- note. water max. +100°C
- heat transfer oils, dissolvents, special cases
- used as standard in pumps with thread connection

ACCESSORIES
2. Single external mechanical seal

• Single mechanical Teflon seal which is installed outside the pump
• Available DN65-300 acid-proof pumps
• Used for acids and other aggressive liquids (e.g. sulphuric acid 98%)
• Note! The maximum operating pressure is 10 bar (if the maximum operating
pressure is exceeded, the seal will open)
• Liquid temperature -15 … +120°C
• Marking ‘T’ e.g. ALS-1065/4T
Materials
Rotating ring Teflon PTFE
Stationary ring Ceramic
All parts which come into contact with liquid are made of Teflon.
3. Double mechanical seal

Two opposing seals with outside sealing liquid brought from outside (circulation),
the pressure of which can be lower or higher than that of the liquid being pumped.
If it is desired that no seal water enters the process, the pressure of the seal water
is then set lower than that of the liquid being pumped. If the seal water is allowed
to enter the process, the pressure of seal water can be higher than that of the liquid
being pumped.
• Available for DN 65-300 pumps
• Operating temperature with water max. +180°C (other liquids defined separately)
• Requires a separate seal water monitoring unit, see above (Kolmeks can deliver)
• Marking ‘KT’ e.g. ALS-1154/4KT
• Hot, crystallising and accumulative liquids
• Momentary dry running of the pump is allowed
Standard materials
Seal size Liquid side Atmosphere side Metal parts
18mm SiC / SiC / EPDM Carbon / SiC / EPDM AISI 316 / 329
25–65mm SiC / SiC / PTFE Carbon / SiC / EPDM AISI 316 / 329
Special materials
18mm SiC / SiC / VITON Carbon / SiC / VITON AISI 316 / 329
32–65mm SiC / SiC / PTFE Carbon / SiC / EPDM 254 SMO
Other sizes and materials available by request.
Available colours and special surface treatments

Standard surface treatment:
In Finland, the pumps are delivered in red, colour RAL3020. The painting is carried out according to SFS-EN ISO 12944-5
which includes both primer and finishing. Marking AY100/1-FeSa2½.
The following Kolmeks colours are also available at no extra cost: Grey RAL7030, Black RAL9017 and Blue RAL5010. The
painting is carried out according to SFS-EN ISO 12944-5 which includes both primer and finishing.
Marking AY100/1-FeSa2½.
Special surface treatments and special colours:

1. Epoxy paint
Epoxy paint job with required paint thickness, e.g. 160, 240, 280 or 300µm. The painting carried out according to Standard 8
SFS5873 which includes one or more coats of primer and one coat of finishing. Marking EP 240/3FeSt2 (primer 2x80µm +
finishing 1x80µm).
Epoxy painting can be carried out on both on the inside and outside if the pump housing. The motor can also be painted
from the outside.

ACCESSORIES
2. Customized colour
Standard painting can also be carried out in custom colours. In such cases the painting is carried out according to Standard
SFS-EN ISO 12944-5 which includes both primer and finishing. Marking AY100/1-FeSa2½.
Painting system markings:

Painting system markings are described in Standard SFS-EN ISO 12944-5.
Paint type, e.g. AY = Acrylic paint, EP = Epoxy paints, EPZn (R) = Zinc epoxy paint etc.
For example __EP 240/3FeSa 2½ 02
ABBREVIATIONS:
__ = Paint manufacturer code
EP = Epoxy paint
240/3 = Nominal coat thickness / number of paint coats
Fe = Foundation (steel or cast iron surface)
Sa 2½ = Preparation (here spray cleaning)
02 = Quality of mechanical treatment
Accessories, special voltages and non-standard enclosure classes of

electric motor
PTC thermistors
Installed 3 pieces/motor (one for each phase). Standard in 75–160kW motors. Operates like a switch, closed below the
limiting temperature and open above the limiting temperature.
Can only be connected to a protection system, relay or frequency converter input designed for a PTC thermistor. May not be
connected to a 230 V control circuit because its voltage tolerance is only a couple of volts. Quick and accurate indication of
limiting temperature, resets once the temperature is slightly below the limiting temperature. Colours indicate the limiting
temperature (stock temperatures +130 … +140°C.) Several temperature alternatives (e.g. 110, 120, 140, 155°C etc.) can be
ordered by request. A demanding target requires thermistors for two temperatures in the same motor e.g. 3 pieces for 140°C
alarm and 3 pieces for 150°C stoppage.
Thermal protector (thermal contactor)

Coil’s internal thermal protector bi-metal switch +140°C. Can be installed 1 piece/motor or 3 pieces/motor (one for each
phase).
A small mechanical switch is opened by temperature. Most commonly used for small motors, 1 piece/motor, and for 3
pieces/motor in large motors. The switches are wired to the terminal box where series connections are connected. When
a connection malfunctions, the faulty one can be bypassed and the protection is still sufficient. Can also be connected
directly to a 230 V control circuit. Can be connected to most PTC thermistor circuits. Reasonably large temperature differ-
ence in between switch on and off and therefore not usually used in place of a thermistor. Available for other temperatures
by request.
PT100 (PT-1000) or KTY sensors

The pump motors can be delivered either with KTY or PT100 temperature sensors.
Motor anticondesation heater

One-phase resistor/230V. If required, the heating element can be installed on the motor windings if condensation water
occurs during their operation. Heating is usually on only when the pump is stopped. Typical applications are pumps in
refrigeration systems, pumps installed outdoors and other pumps which occasionally run in conditions where condensation
8 water is formed. The operating voltage is usually 230 V, but other voltages are also available to order. Heating power is
determined by motor size. In exceptional circumstances, heating power according to conditions at the site. In some cases,
at about -30 °C, solution pumps might require larger power and additional heating, including when the motor is running.
Thermocouple TC
Thermocouples TC i.e. thermoelement. Usually K type. A pair of thermoelements used for temperature measurement, the
voltage of which indicates the temperature or, more accurately, the temperature difference between the connection and
free ends. Note! The term thermocouple (or thermoelement) must not be confused with the term thermistor and other
temperature measuring sensors.

ACCESSORIES
Tropical protection
Includes a rain cap and a protective oil film inside the motor
Curve plate
Quick connection plug R
EMC cable inlets (frequency converter operations)
Drain connection G3/8”

Used if the housing needs to be drained after the pumping session.
Temp Coat - pump external coating

Used in c refrigeration systems when the temperature is below 0°C. Can be applied to the external surfaces of the sealing
flange and the pump housing.
Ceramic N-end bearing for frequency converter operations of over 90 kW (standard over 110 kW
motors)
Vibration measurement nipples SPM
Standard voltages
1x230V, 50Hz 0,05–1,5kW 3x400/230 V, 50 Hz 0,03–3 kW 3x690/400 V, 50 Hz 4–160 kW
Special voltages
According to request by customer. Maximum 690V. Example 42V, 110V, 120V, 380V, 500V etc. Availale as 1-phase and
3-phase.
Standard enclosure classes
IP 54 0,03–3 kW 1000, 1500r/min 0,25–4 kW 3000r/min
IP55 4–160 kW 1000, 1500r/min 5,5–55 kW 3000r/min
Special enclosure classes
IP 55 also available for small pumps
IP 65
Pressure measurement connections in flanges size 1/4” (standard in inline pumps)
Belzona coating
Used when pumping particularly erosive liquids. The maximum operating temperature is +90°C. If the temperature of the
liquid being pumped is higher than +60°C, a double coating is applied. Can be applied inside the pump housing and to the
internal surfaces of the sealing flange.
Urethane insulation of sealing flange
Used in refrigeration systems when the temperature is below 0°C. Can only be applied to the outer surfaces of the sealing
flange.
Non-standard flanges
If required, the pumps can be delivered with ANSI, NP6 and PN16 borings. PN10 flanges are standard. (DN32-150 flanges are
the same PN10 and PN16.)
Pumping without a foot valve when the liquid level is below the pump
• The pump is equipped with an automatic aspirator which fills the suction pipe before the pump starts, making pumping
possible without a foot valve.
• After the pumping has stopped, the suction pipe empties. As pumping starts again, the aspirator fills the suction pipe
before the pump starts.
• An advantage is smaller energy consumption, because there is no suction loss caused by the foot valve. As the suction
pipe empties after the pumping has stopped, there is no risk of freezing in winter. The aspirator can therefore be used in
various outdoor applications. The device is commonly used in water supply plants, decking washing water pumps, bilge
pumps and various industrial applications.
8
• The device requires compressed air to operate.
• Several sizes are available. The device size is dependent on the pumping capacity of the system. The device is delivered
separately with the pump and the delivery includes all connections and pipes required for installation.

ACCESSORIES
Packaging and documentation

1. Packaging
• As a standard, the pump is delivered in a reinforced cardboard box. If there are several pumps, the packages are fastened
onto disposable pallets in order to avoid possible freight damages.
• By request, the pumps can be delivered in export packages or sea export packages.
2. Documentation
Documents delivered free of charge
• Installation and operating instructions are included with the pumps.
• At the order stage and if needed, one set of documentation which includes installation and operating instructions, a
datasheet and a product specification is included free of charge.
• Certificate of Compliance ‘2.1’ SFS-EN 10204
• Copies of the ISO 9001 quality certificate, an ISO 14001 environmental certificate, and a Russian TR certificate with Kol-
meks stamp can be delivered free-of-charge,
• A spare part list/spare part recommendation for delivered pumps
Documents delivered at extra cost:

• Detailed datasheet
• Detailed assembly drawing + parts list
• Testing record, see Test runs
• Classification Society Certificate (start costs + testing costs + rating institution costs)
• Notarised Russian TR product certificate
• Copy witnessed by certifier of Russian TR product certificate
• Material Certificate ‘2.2’ SFS-EN 10204
• Material certificate of specific casting batch. NOTE! Material certificate must be ordered in good time.
• Copies: 1 set free of charge, extra sets are charged separately.
• Inspection Certificate ‘3.1’ SFS-EN 10204 i.e. pump-specific test run (start costs + testing costs) specific data sheet
--> Contents of material certificate:
Statement on conformity of the order and results of delivery-specific inspection.
--> Certifier of material certificate:
Representative authorised by the manufacturer independent of production department.
• Acknowledgement of receipt ‘3.2’ SFS-EN 10204 i.e. pump-specific test run

--> Contents of material certificate:
Statement on conformity of the order and results of delivery-specific inspection.
--> Certifier of material certificate
Representative authorised by the manufacturer independent of production department and representative
authorised by the purchaser or inspector as specified in regulations issued by public authorities.
Note! Documentation must be requested at the order stage, not after the delivery.
3. Test runs and pressure tests

• Test run without pressure test (start costs + cost per test)
• Pressure test (cost per test is charged)

AT_-1102/2 60Hz DN100 3600 r/min
min150
645
G 1/4 G 1/4
107
110
150
24 Ø100 8xØ19
3xM12, Depth 16 140 Ø180
450
670
170
210
90
3xØ14
4xØ16
155
170
210
kW A kg H
OKN-132 E1 F19 7.5 (9) 15.0 202 495
OKN-132 C1 F19 5.5 (6.6) 11.0 186 495
OKN-112 E1 F19 4.0 (4.8) 8.2 138 430
Nominal power inside the parenthesis available when motor is wound according to the supply voltage and frequency.
Pump efficiency Total efficiency

0.7 Ø144 0.6
0.6 0.5
Ø144
0.5
0.4
0.4
Ø128 0.3 Ø128
0.3
0.2
0.2
0.1 0.1
0 0
0 5 10 15 20 25 30 35 40 l/s 0 5 10 15 20 25 30 35 40 l/s
LOREM IPSUM JE ZULT SC-INLINE DOMESTIC HOT WATER PUMPS - AEP, LP and ALP
MAAR 60 HZ
m Head
35
Ø144
30
25
NPSH
Ø138
m
4
20 8
14
Ø
15 6
Ø133
10 4
Ø128
5 2
0
0 5 10 15 20 25 30 35 40 l/s
Flow
3
0 20 40 60 80 100 120 140 m/h
kW Shaft power P2
10 Ø144
9 Ø138
8 Ø133
7
6 Ø128
5
4
3
2
1
0
0 5 10 15 20 25 30 35 40 l/s
PUMP SERVICE
kW Total input power P1
11 Ø144 Ø138
10
Ø133
9
8 Ø128
7
6
5
4
3
2
1
0
0 10
04/2013 5Subject to change 15
without 20
prior notice. 25 30 35 243 40 l/s www.kolmeks.com
www.kolmeks.com
PUMP SERVICE
General notes
Kolmeks pumps do not require regular service. The pump shaft seal is a mechanical seal (not used in wet motor pumps). It
is a part which undergoes wear and which must be replaced if it starts to leak. Please note that a leakage of a few drops per
hour can be quite normal, especially when pumping water-glycol mixtures.
The pump motor bearings are pre-lubricated and can thus withstand several years of continuous use. In case of any motor
malfunction, we recommend replacing the whole motor unit.
Motor unit replacement

The pump motor unit includes: motor, sealing flange, impeller and seals.
If a motor malfunction or a seal leak occurs, replacing the motor unit is simple and quick and does not require long periods
of stand-by or operation downtime. There is no need to carry out procedures on the piping, because there is no need to
detach the pump housing.
Seal kits and O-rings for SC frequency converter pumps
Connection Grey cast Nodular Bronze Stainless Shaft seal, O-ring O-ring Motor
iron cast iron steel PN10
EN-GJL-200 EN-GJS-400 CuSn10Zn2 AISI 316 Ø [mm] Size Material
G or DN PN10 PN16 PN10 PN 16 materials [mm] [kW]
12, carbon/ 0,08 and
G 3/4 AE-20/4 SC_ no no no SiC Viton 123 X 2,5 NBR 0,2
12, carbon/
AE-20/2 SC_ no no no SiC Viton 123 X 2,5 NBR 0,65
AE-25/4 SC_ no AEP-25/4 SC_ no SiC Viton 123 X 2,5 NBR 0,2
G1 AE-26/4 SC_ no AEP-26/4 SC_ no SiC Viton 123 X 2,5 NBR 0,2
12, carbon/
12, carbon/
12, carbon/
G 1 1/4 AE-32/4 SC_ no AEP-32/4 SC_ no SiC Viton 145 X 2,5 NBR 0,2-0,37
12, carbon/
AE-33/4 SC_ no AEP-33/4 SC_ no SiC Viton 145 X 2,5 NBR 0,2-0,37
DN 32 L-32/4 SC_ no no no SiC EPDM 100 X 2,5 NBR 0,2
12, carbon/
L-32/2 SC_ no no no SiC EPDM 100 X 2,5 NBR 0,65
12, carbon/
DN 40 L-40A/4 SC_ no no no SiC EPDM 145 X 2,5 NBR 0,2-0,37
12, carbon/ 0,2 and
DN 50 L-50A/4 SC_ no LP-50A/4 SC_ no SiC EPDM 150 X 3 NBR 0,55
DN 65 L-65A/4 SC_ LH-65A/4 SC_ no no SiC EPDM 179,3 X 5,7 EPDM 0,75
DN 80 L-80A/4 SC_ LH-80A/4 SC_ no no SiC EPDM 179,3 X 5,7 EPDM 0,75
18, carbon/
DN 100 AL-1102/4 SC_ ALH-1102/4 SC_ ALP-1102/4 SC_ ALS-1102/4 SC_ SiC EPDM 179,3 X 5,7 EPDM 0,75

PUMP SERVICE
Spare parts
No. NAME No. NAME

1 Electric motor 40 Mechanical seal
2 pump housing 50 O-ring / Gasket
3 Impeller 55 Gasget (AT- and T-series)
5 Sealing flange 56/57 Wear ring (N-series)
8 Base plate 60 Nut / Screw
16 Cover (AT- and T- 65 Screw (AT- and T-series)
series) 67 Screw
24 Nut / Screw 80 Pipe joint (AMK-25,-26,
25 Washer AHV-25, AE-26,-33, AP-33)
26 Key 80/81 Pipe joint (ALH-series)
86 Pipe (ALH-series)
93 Flap device (AT- and T-series)
94 Pin (AT- and T-series)

PUMP SERVICE
Replacing motor unit for pumps less than 1.5 kW

Note! Only an authorized person may carry out the replacement.
Starting situation. The pump 1) Stop the pump, open
is running normally. any possible safety switch
and remove fuses. En-
sure that no one is able
to switch the current on,
even by accident, during
the replacement. Close the
valves.
2) Detach the motor cable. 3) Lift the operation unit

Open the screws/bolts of the from the pump housing.
operating unit. Watch out for hot water!
4) Replace the gasket/O-ring 5) Install a new motor

of the housing. unit. Tighten the screws/
bolts of the unit evenly.
6) Connect the motor cable

and open the valves. Start
the pump and check the di-
rection of rotation. Vent the
system. Monitor the opera-
tion of the pump.

PUMP SERVICE
Replacing motor unit for pumps over 1.5 kW

Note! Only an authorized person may carry out the replacement.
Starting situation: The pump 1) Stop the pump, open a

is running normally. possible safety switch and
remove fuses. Ensure that
no one is able to switch the
current on, even by accident,
during the replacement.
Close the valves.
2) Close the valves and de- 3) Lift the operation unit by

tach the connecting cable of means of a hoist. Watch out
the motor. Next, detach the for hot water!
flush pipe (in ALH pumps).
Open the screws/bolts of the
operation unit.
4) Replace the gasket/O-ring 5) Install a new motor unit.

of the housing. Tighten the screws/bolts of
the unit evenly.
6) Connect the motor cable

and open the valves. Start
the pump and check the di-
rection of rotation. Vent the
system. Monitor the opera-
tion of the pump.

PUMP SERVICE
Replacing impeller
1) Detach the motor unit 2) Install the motor unit

as usual (see Replacing in a vertical position.
motor and replacement
motor unit).
3) Open the screw/bolt of 4) Use screwdrivers to

the impeller. detach the impeller.
5) Use an extractor if 6) The motor unit is

necessary. without an impeller.
Replace the shaft seal
when necessary (see
Replacing a shaft seal).
7) Install a new impeller. 8) Attach the motor unit

If required, you can lightly as usual.
tap the impeller with a
rubber mallet until flush
with the ridge. Tighten
the screw/bolt of the
impeller.

PUMP SERVICE
Replacing shaft seal
Detaching seal
Stop the pump and close the shut-off valves. Detach the motor unit from the pump housing. (see replacing motor unit).
Detach the impeller of the pump (see Replacing an impeller).
Starting situation. The 1) Detach the shaft seal

motor unit with the using two screwdrivers.
impeller detached. Do not damage the seal-
ing surface of the shaft.
2) Also detach the 3) The motor unit disas-

sealing flange from sembled, with installa-
the motor front plate tion tools.
using two screwdrivers.
If needed, replace the
sealing flange with a
new one.
Installing mechanical seal

Lubricating and installing O-ring
NOTE! Touch the seal parts with clean hands only, and as little as possible and with extreme care.
Check the housing and O-ring groove for the stationary ring in the sealing flange are clean. Check the O-ring and lubricate it
with soap water, not with oil. Then install the O-ring in the groove of the sealing flange (in the stationary ring for BO- and
BP-marked seals).

PUMP SERVICE
Pressing stationary ring into the sealing flange

Check that the stationary ring is undamaged, clean, smooth and not scratched. If the stationary ring is packed in protective
foil, detach it with a knife, carefully minding the rotating surface. Then, remove the grease with a dry and clean cloth. Press
the stationary ring into the sealing flange with the smoother surface facing you (the pump). Ensure that the O-ring does not
push the ring out. If this happens, use more lubrication. Finally, clean the rotating surface of the stationary ring with a clean
and lint-free cloth or towel which is dampened with a suitable organic solvent, e.g. methyl alcohol or spirit. Alternatively,
the stationary ring can be installed with a clean lint-free cloth without fingers touching the rotating surface. Finally, the
rotating surface should be blown clean with compressed air.
Installing sealing flange onto D-end motor flange

Install the sealing flange onto the motor. Place the assembly sleeve of the installation tool so that it forms a shaft
extension. In large pumps, first install the sealing flange onto the motor and then the stationary ring (BO- and BP-marked
seals).

PUMP SERVICE
Assembly sleeve as shaft extension
Soaping assembly sleeve

Check that the seal body, bellows and rotating ring are clean and undamaged. If the rotating surface of the rotating ring is
dirty, clean it with a clean and lint-free cloth which is dampened with a suitable organic solvent, e.g. methyl alcohol or spirit.
Lubricate the shaft and the seal elastomer bellows suitably with soapy water, not with oil.

PUMP SERVICE
Pushing bellows onto shaft

Detach the spring (if separate) and, using even pressure, push the bellows onto the shaft using the installation mandrel
until the rotating surfaces meet. Do not press too hard. If the spring is attached to the frame, install the whole seal onto
the shaft from its bellows part (end of seal) by pushing with a suitable sleeve. If the rotating ring of the seal does not stay
fast in the seal, install it first and ensure that when installing the seal frame, the frame and the rotating ring are in place
correctly.
Note! Do not touch the rotating surface of the rotating ring.
Installing spring, back plate and impeller

Rotate the shaft sligtly and carefully and ensure that the seal fits well. Then, install spring, back plate (if separate) and
impeller.

NOTES
Kolmeks and the new energy efficiency directive

Kolmeks dry motor driven pumps fulfil all energy efficiency requirements in force as from the beginning of 2013. The basis for
these requirements is the EcoDesign directive which harmonises the requirements for energy consuming and energy-related
products.
The EcoDesign directive - 2009/125/EC October 21st 2009

Establishes a framework for the setting of Community EcoDesign requirements for energy-related products by cont-
ributing to sustainable development by increasing energy efficiency and the level of protection of the environment,
while at the same time increasing the security of the energy supply.
The Directive provides for the setting of requirements which the energy-related products covered by implementing
measures, i.e. measures adopted pursuant to the Directive laying down EcoDesign requirements for defined pro-
ducts or for environmental aspects thereof, must fulfil in order to be placed on the market and / or put into service.
Commission Regulations implementing the Directive with regard to EcoDesign requirements have been issued for
water pumps as well as for electric motors.
All Kolmeks’ pumps fulfil said energy efficiency requirements.
Kolmeks dry motor driven pumps

Regulation (EU) No 547/2012, June 25th 2012
Regulation 547/2012 sets minimum efficiency requirements (MEI = minimum efficiency index), as well as informa-
tion requirements for rotodynamic water pumps in Annex II of the Regulation, and shall the requirements apply in
accordance with the following timetable. MEI means the dimensionless scale unit for hydraulic pump efficiency at
best efficiency point (BEP), part load (PL) and over load (OL)
Requirements are implemented in two phases

From January 1st 2013 water pumps shall have a minimum efficiency of MEI ≥0.1
and shall the information requirements set out be fulfilled
From January 1st 2015 water pumps shall have a minimum efficiency of MEI≥0.4
The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller diame-
ter. The trimming of the impeller will adapt the pump to a fixed duty point, leading to reduced energy consumption.
The minimum efficiency index (MEI) is based on the full impeller diameter.
The operation of a water pump with variable duty points may be more efficient and economic when controlled, for
example, by the use of a variable speed drive that matches the pump duty to the system
The most efficient water pumps have a MEI of ≥ 0.70

More information on the comparative efficiency of pumps can be found at
www.europump.org/efficiencychartsMEI ≥ 0,4
All pumps in this catalogue fulfil the minimum requirements set by the Directive and it’s
implementing regulations

NOTES
Kolmeks electric motors
Regulation (EC) No 640/2009, July 22nd 2009
Regulation 640/2009 sets minimum efficiency levels (IE class) for electric motors. The IE class defines di-
rectly the minimum efficiency (as a percentage) based on the number of poles and the rated output power
of the motor.
The efficiency level of the motor shall be visibly displayed on the motor, for example IE2 – 94,9 %.
Requirements are implemented in phases

Since June 16th 2011 IE2 is required for motors from 0.75kW to 375 kW.
From January 1st 2015 IE3 is required for motors from 7.5 kW to 375 kW and IE2 is allowed only in
combination with a variable speed drive.
From January 1st 2017 IE3 is required for all motors from 0.75 kW to 375 kW) and IE2 is allowed only in
combination with a variable speed drive.
All Kolmeks manufactured motors meet at least IE2 level requirements.
We will gladly supply You with more information and answer any questions
regarding the new energy efficiency requirements

Pump Catalogue

Uploaded by

Copyright:

Available Formats

Pump Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pump Catalogue

Uploaded by

Copyright:

Available Formats

PUMP CATALOGUE

Kolmeks Ltd is a Finnish pump and electric motor

Kolmeks – Efficient reliability

Our most important values are, environ-

DOMESTIC HOT WATER PUMPS, INLINE CENTRIFUGAL PUMPS WITH

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V

INLINE PUMPS WITH INTEGRATED SC FREQUENCY CONVERTER, 1X230V

INLINE PUMPS WITH FIXED SPEED-MOTOR, 3X400V

INLINE TWIN PUMPS WITH FIXED-SPEED MOTOR, 3X400V

END-SUCTION PUMPS WITH FIXED-SPEED MOTOR, 3X400V

ATEX PUMPS WITH FIXED-SPEED MOTOR, 3X400V

PUMP ACCESSORIES, SPECIAL SURFACE TREATMENTS AND

General technical data

Quick Selection Chart

A E-3 L-80A/4SC_ 0,75kW

www.kolmeks..com 36 04/2013 Subject to change without prior notice.

Supply voltage: 1 x 230 V, 50 Hz

Advantages of selecting an SC pump

04/2013 Subject to change without prior notice. 37 www.kolmeks.com

L-65A/4 0.55kW constant speed

Payback period about

Price difference between constant Use of energy

www.kolmeks..com 38 04/2013 Subject to change without prior notice.

Kolmeks recommendation for pumps in district heating circulation

  

Examples of Kolmeks recommendations for pumps in district heating circulation systems

04/2013 Subject to change without prior notice. 39 www.kolmeks.com

Standard materials and fields of application for SC pumps

Operating temperature -15...+95 oC

www.kolmeks..com 40 04/2013 Subject to change without prior notice.

Rating plate information

Pump type Motor code marking

1) Pump series: 3) Flange DN size: 4) Electric motor pole number:

Ensure the following when installing the pump:

04/2013 Subject to change without prior notice. 41 www.kolmeks.com

SCA and SCG pumps

www.kolmeks..com 42 04/2013 Subject to change without prior notice.

Control methods and control connections

Terminal 2 Programmable 0–10 VDC, 0–5 VDC analog input

Terminals STF, STR, RH, RM, RL Programmable digital inputs

Terminal 10 5 VDC voltage supply for potentiometer

AM / 5 Programmable analog output

Transistor output, Terminals RUN, SE Load 27 V / 0.1 A, voltage loss 3.4 V

Terminal factory settings

Terminal STF: Jumper between terminals PC–STF open/closed = pump off/on

Terminal STR: Not in use

Terminal RH: Dry running protection in the SCD version

Terminal RM: Jogging operation. PC – RM open/closed = normal operation / runs forced

04/2013 Subject to change without prior notice. 43 www.kolmeks.com

SCA pump: Direct speed reference by potentiometer

Standard control connections, PU / EXT COMBINED OPERATION MODE

www.kolmeks..com 44 04/2013 Subject to change without prior notice.

SCB pump: Constant differential pressure across pump

Operating principle and system adjustment

Standard control connections, PU / EXT COMBINED OPERATION MODE

PUMP IN SUPPLY PIPE

04/2013 Subject to change without prior notice. 45 www.kolmeks.com

SCC pump: Constant differential pressure in piping

Operating principle and system adjustment