TWG Infra BOQ DUPA Forms Renovation of OCC

Project Title : Renovation of the CHED Central Office Building (Office of the Chairman and Commissioners)
Location : 4F CHED Building, C.P. Garcia Avenue, UP Diliman, Quezon City

Subject : BILL OF QUANTITIES (BOQ)
Date :
Item
Description Quantity Unit Unit Cost Total Cost
No.
1.0 GENERAL REQUIREMENTS

1. Bonds and Insurance 1.00 lot
2. Hauling / Delivery of Materials 1.00 lot
3. Temporary Facilities and Field Office 1.00 lot
4. Power, Water Consumption, Security Services, 1.00 lot
Provision of Personal Protective Equipment and
Safety Signage
5. As-Built Plans/ Drawings 1.00 lot
Sub-Total for Item No. 1.0 >>> 0.00
2.0 DEMOLITION & REPAIR WORKS
1. Demolished portion of (E) walls and remove (E) 385.00 m2
doors; Protect adjoining walls, beams columns &
floor. Prepare for new layout; See proposed floor
plan
2. Remove (E) ceiling and (E) ceiling mounted 1,050.00 m2

fixtures. Returned dismantled / unused materials to
the owner. Prepare for (N) ceiling; see attached
ceiling plan.
3. Remove (E) floor tiles and floor finishes. Embed 1,050.00 m2

new conduits & wiring devices; See attached
dwgs.Prepare existing surfaces to receive new
finish.
4. Removed (E) ACU for re-use/relocation. Return 33.00 units

dismantled/unused materials to the owner. Prepare
for reinstallation of refurbished A/C units;Coordinate
to the owner for the final locations. See mechanical
dwgs.
5. Removed (E) Audio Visual Equipments, electrical 1.00 lot

wiring, and damaged gutter/roofing. Return
dismantled / unused materials to the owner for
reused / refurbishing. Prepare for (N) layout of the
Audio Visual Equipments; see plans for details
6. Board ups (E) openings with materials & finishes to 31.75 m2

match existing
3.0 ARCHITECTURAL/STRUCTURAL WORKS
ENSURE all materials & quantities are as per drawings &
specs
1. Walls & Wall Finishes
a. Glass Partition using ½ thk Tempered Glass with 315.00 m2
wooden accent design and Patch Fittings Door
(Office of the Chairman and Commissioners)
b. Construct (N) 150mm thk. Reinf. CHB wall (to 45.00 m2

extend to the underside of the slab / beam).
Securely fasten / weld (N) rebars to (E) slab/beam
reinforcement; Plastered and latex painted finished
c. (N) Marine board double wall covered with wall 135.00 m2

paper design for drop wall and door portal submit
sample for approval. See plan for detail
d. Install (N) 300x600mm homogeneous wall tiles 250.00 m2
(polished) at toilet;submit sample for selection and
approval.
1
Item
No.
2. Doors and Windows

Fabricate & install the following doors / windows as
complete assemblies including finish hardware &
accessories as per plan
a. D-01: 0.90 X 2.15 m 12mm thk tempered frameless 17.00 set/s
glass door with frosted stripped film. See plan for
details
b. D-02: 0.90 X 2.15 m 45mm thk Tanguile solid core 11.00 set/s
panel swing door with groove and 20mmx100mm
solid wood casing (both sides), submit sample for
approval
c. D-03: 1.80 X 2.15 m Powder coated aluminum 2.00 set/s

double acting swing door 10mm thk tempered
frosted glass for door panels,submit sample for
approval
d. D-04: 1.40 X 2.15 m 12mm thk tempered frameless 1.00 set/s

glass door with frosted stripped film. See plan for
details, submit sample for approval
e. D-05: 0.90 X 2.15 m 45mm thk Hollow core flush 1.00 set/s
sliding door, painted finish with 10mm thk clear
wired glass vision lite and solid wood top panel &
jambs, submit sample for approval
f. D-06: 0.90 X 2.10 m 45mm thk Tanguile (Marine 10.00 set/s

Plywood) Hollow core flush swing door with bottom
louvers for CR, submit sample for approval
g. (N) Roll-up window shades and valance for Exterior 120.00 m2

and interior windows
3. Built-in Overhead Cabinets, Counters, Modular
Partitions Assembly and Furnitures
Fabricate & install the following assemblies;
(Coordinate with owner on loose furniture / Eqpt
dimensions for appropriate
clearances/heights/finish
a. Advertising Poster Stands 1.20x1.80m 18.00 sets

b. Furnitures for Chairman and Commissioners (See 1.00 lot
attached furniture plans for type and location)
c. OCH 1 Overhead cabinet assembly including 5.00 set/s

supports; for chairman and commissioners; see
details
d. OCH 2 Overhead cabinet assembly including 3.00 set/s
details
e. OCH 3 Overhead cabinet assembly including 3.00 set/s
details
f. Modular Partition and table top assembly with 3 1.00 lot
drawers mobile pedestal for Chairman and
Commissioners follow as per plan; submit samples
for approval by the owner.
4. Ceiling Finishes
a. CT1-(N) 10mm thk.x 600 x 600 white acrylic panels 490.00 m2
on white t-runners by CKM bldg materials Inc..
including shadow line trim (see plan for detail)
b. CT2-(N) 24mm thk seamless Acoustical Ceiling 450.00 m2

(see plan for detail)
2
Item
No.
c. CT3-(N) 10mm thk.x 600 x 600 white acrylic panels 290.00 m2

on white t-runners by CKM bldg materials Inc.
including shadow line trim for hallways & common
area (see plan for detail)
d. (N) Drop wall and door portal wood design; (see 135.00 m2
plan for detail)
5. Floor Finishes
a. Install (N)3mm thk 600X600mm Carpet Tiles (Gray) 262.15 m2
Main offices of Chairman and Commissioners;
submit samples for selection/approval
b. Install (N) 200X1000mm Vitrified semi glazed wood 296.08 m2

planks tile replica floor tile (Staff area, pantry,
receiving area & Board room reception): submit
samples for selections/approval
c. Install (N) 600X600mm Homogeneous floor Tiles 94.32 m2

(white) Comm. Adamat and Darilag Receiving area;
submit samples for selection/approval
d. Install (N)3mm thk 600X600mm Carpet Tiles (blue) 161.59 m2

Conference Rooms; submit samples for
selection/approval
e. Install (N)300X300mm Homogeneous floor tiles for 28.04 m2
all CR; submit samples for selection/approval
f. Install (N)3mm thk 600X600mm Carpet Tiles 20.00 m2
(brown) VIP Waiting Lounge Office of the
Chairman; submit samples for selection/approval
6. Toilet Accessories and Plumbing Works

a. Hook/Bumper (To be installed at the back of the 8.00 set/s
toilet door)
b. Toilet Paper Holder: Use Acasia 3443 by American 8.00 set/s
Standard
c. Towel Bar: Use Acasia 3446 Towel Bar by 8.00 set/s
American Standard
d. Towel Ring (to be intalled near lavatory) 8.00 set/s
e. Water Closet; see specs 8.00 set/s
f. Granite counter top lavatory ; see specs 8.00 set/s
g. Floor drain; Brass nickel-plated 8.00 set/s
h. Hand Spray (bidet); see specs 8.00 set/s
i. 6mm thk frameless (unbeveled) Face Quality Q2 8.00 set/s
Mirror on 20mm thk Marine Plywood Backing
j. Plumbing Works and accessories 1.00 lot
7. Painting/ Varnishing/ Waxing Works (Including Prep &
Patching Works)
a. Masonry Surfaces 320.00 m2
b. Wooden Surfaces 65.00 m2
c. Gypsum Board Surfaces 560.00 m2
8. Roofing Works and Water proofing of concrete gutters
a. Replacement of roofing at the Office of the 1,400.00 m2

Chairman and Commissioners & installation of
Roofing going to Chairman's Board room (See plan
for details)
b. Water proofing of concrete deck and gutters 75.00 m2

4.0 ELECTRICAL / MECHANICAL WORKS
ENSURE all materials & quantities are as per drawings &
specs
1. Roughing-Ins, Conduits and Raceways (provide
detailed breakdown)
3
Item
No.
a. PVC Pipes 1/2" dia. 2,993.00 l.m.

b. PVC adapater 1/2" dia. 1,041.00 pcs
c. Wireway 70.00 l.m.
2. Wires and Cables (provide detailed breakdown)
a. Wires and Cables for Lighting layout 4,845.00 l.m.
b. Wires and Cables for Convenience outlet 12,502.00 l.m.
3. Wiring Devices
a. Three-gang Wall Push Switch, 16A, 250V 14.00 set/s
(Panasonic - With Light Swith)
b. Two-gang Wall Push Switch, 16A, 250V (Panasonic 10.00 set/s
- With Light Swith)
c. One- gang Wall Push Switch, 16A, 250V 18.00 set/s
(Panasonic - With Light Switch)
d. Three-Way Three-gang Wall Push Switch, 16A, 3.00 set/s
250V, (Panasonic -With Light Switch)
e. Three-Way Two-gang Wall Push Switch, 16A, 8.00 set/s
250V, (Panasonic -With Light Switch)
f. Duplex Universal Outlet with Ground and Shutter, 134.00 set/s

Panel Type, Panasonic Wide Series,16A, 250V;
Verify Specs
g. Single Universal Outlet with Ground and Shutter, 49.00 set/s
Panel Tye, Panasonic Wide Series,16A, 250V;
Verify Specs
h. Weather proof Duplex Universal Outlet with 6.00 set/s

Ground and Shutter, Panel Type, Panasonic Wide
Series,16A, 250V; Verify Specs
i. Junction box/Pull box 578.00 set/s
j. Smoke Detector; See specs 42.00 set/s
k. Heat Detector; See specs 6.00 set/s
4. Lighting / Ventilation Fixtures/AC
a. 2-36 Watts, fluorescent (ledlight) 600 x 1200 60.00 set/s
Recessed Mounted Powder Coated Fixture with
100 x 100 mm egg-crate aluminum reflector (matte
finish); see specs
b. 1-36 W /18W fluorescent box type (ledlight) surface 17.00 set/s

mounted Fixture; see specs
c. 36 Watts LED Panel Light 600mm x 600mm Flush 45.00 set/s
Mounted Fixture With Aluminum Housing; see
specs
d. 14 Watts,watts Led strip light, 5m commercial 35.00 set/s
grade; see specs
e. 14 Watts, T5 fluorescent (ledlight) Surface Mounted 38.00 set/s
Fixture with separate togle switch; see specs
f. 12w PLC cfl type 230v (ledlight) horiz. Mounted on 84.00 set/s
recess-mounted fixture with tempered glass cover
200mm dia; see specs
g. Emergency Light; see specs 38.00 set/s
h. Illuminated Exit signs; see specs 12.00 set/s
i. (N) Carrier or approved equal 3HP, ACCU, Inverter, 8.00 set/s
230V, 60Hz, Single Phase, Wall Mounted,
complete with mounting brackets/accessories and
drain pipe to nearest catch basin; see detail and
mechanical dwgs.
j. (N) Carrier or approved equal 3TR ACCU Inverter, 1.00 set/s

230V, 60Hz, Single Phase, 60hz, Floor Mounted,
complete w/ mounting brackets/accessories and
mechanical dwgs.
4
Item
No.
k. (N) Carrier or approved equal, 3TR ACCU Inverter, 9.00 set/s

230V, 60hz, Single Phase, Ceiling Mounted,
complete w/ mounting brackets/accessories and
mechanical dwgs.
l. (N) Carrier or approved equal, 5TR, ACCU, 1.00 set/s

Inverter, 230V, 60hz, Three Phase, Ceiling
Mounted, complete w/ mounting
brackets/accessories and drain pipe to nearest
catch basin; see detail and mechanical dwgs.
m. Ceiling-Mounted exhaust fan including ductwork, 14.00 set

supports, louver,bird screen and misc. accessories;
see mech dwgs
5.0 DATACOM WORKS, AUDIO VISUAL AND CCTV
SYSTEM
Note: Verify with the owner's IT Dept. for Datacom Specs
and Scopes of Work
1. Roughing-ins, Conduit and Raceways (provide detailed
breakdown)
a. PVC Pipes 3/4" dia 1,026.00 l.m.
b. PVC adapter 3/4" dia. 352.00 pcs
c. Wireway 375.00 l.m.
d. Data Cabinet 3.00 assy
2. Cables & Wiring
a. Data / VOIP Duplex Outlet 50.00 set/s
b. Wifi and wifi Outlet 12.00 set/s
c. CAT 6 Cables (Verify Specs) 3,490.00 l.m.
d. Telephone Outlet 14.00 set/s
e. Miscellaneous Materials and Consumables 1.00 lot
3. Conference Rooms Audio Visual Equipment
a. Ceiling speakers Extron SFG 3CT LP 4.00 set/s
b. Audio Mixer -12-Channel Mixing Console: Max. 6 2.00 set/s
Mic / 12 Line Inputs (4 mono + 4 stereo) / 2
GROUP Buses + 1 Stereo Bus / 2 AUX (incl. FX)
c. Discussion Microphones 20.00 pcs

d. Discussion System Control Unit with Recorder 2.00 set/s
e. Media Presentation switcher Extron 602 MA 2.00 set/s
f. Motorized Screen 16:9 and Projector Units 2.00 set/s
g. Software, Cables, Connectors, Brackets, 1.00 lot
Consumables, Customized Equipment Rack,
Installation and Extensive Training
h. Smart PTZ conferencing camera (lumens or 6.00 units
approved equal)
4. CCTV System (Verify Existing for capacity and
compatibility)
Note: Verify with the owner's Gen. Servs. Dept. for CCTV
system Specs. & Scope of Work
(Submit Brochures, Product Specs and Samples for
comments / approval)
1 CCTV Camera 14.00 set/s
2. CCTV Monitor 1.00 set/s
3. CCTV Pullbox 5.00 set/s
4. CCTV Control Equipment 1.00 set/s
5. Roughing-Ins, Conduit and Raceways (provide 20.00 l.m.
detailed breakdown)
6. RG-59 Coaxial Cable (verify specs) 1,200.00 l.m.
7. Miscellaneous Materials and Consumables 1.00 lot
5
Item
No.
6.0 OTHER ITEMS NEEDED TO COMPLETE WORK:

1. Panel Board Surface Mounted Nema 1 5.00 assy
Main: 150At/ 225 AF, 3P, 220Vac "TQD" GE
Branches: 15-30AT/ 50AF, 2P "TQC" GE
3-Spare 30AT/ 50AF, 3P, "TQC" GE
w/ grounding busbar
2. Roughing-ins, Conduit and Raceways (provide
detailed breakdown) (SMOKE DETECTOR to
FACP)
a. Cable wire 2.0mm² THHN 1,890.00 l.m.

b. PVC Pipes 150.00 l.m.
c. Addressable Fire Alarm Control Panel (FACP) 1.00 set
Direct Cost (Item No. 1+2+3+4+5+6)

Mob/Demob
OCM
Profit
Indirect Cost
Tax 12.00%
Total Cost
Submitted by:
Name of the Representative of the Bidder: __________________________________________
(Signature over Printed Name)
Position: _____________________________________
Company Name of Bidder: ________________________________________________

Date:_________________________________________
6
DETAILED UNIT PRICE ANALYSIS (DUPA)
Date
Project : Renovation of the CHED Central Office Building (Office of the Chairman and Commissioners)
Location : CHED CENTRAL OFFICE, HEDC BLDG., UP-DILIMAN, QUEZON CITY
Amount
Item No. Description Unit Quantity Unit Cost (Pesos)
(Pesos)
General Requirements
DUPA-1 lot 1.00
1. Bonds and Insurance
A MATERIALS
SUB-TOTAL 0.00
UNIT COST/ ITEM 0.00
B LABOR COST Number Rate/day Number of Days
SUB-TOTAL 0.00
C EQUIPMENT RENTAL Number Rate/day Number of Days
SUB-TOTAL 0.00
D Total Direct Cost (TDC) (A+B+C) 0.00
E Unit Cost (UC) = TDC/Quantity (D/ Quantity) -
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
DUPA-2 2. Hauling / Delivery of Materials lot 1.00
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
DUPA-3 3. Temporary Facilities and Field lot 1.00
Office
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
DUPA-4 4. Power, Water Consumption and lot 1.00
Security Services
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
DUPA-5 lot 1.00
5. As-Built Plans/ Drawings
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
Demolition & Repair Works
1. Demolished portion of (E)
walls and remove (E) doors; Protect
DUPA-6 m2 385.00
adjoining walls, beams columns & floor.
Prepare for new layout; See proposed
floor plan
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

2. Remove (E) ceiling and (E)
ceiling mounted fixtures. Returned
DUPA-7 dismantled / unused materials to the m2 1050.00
owner. Prepare for (N) ceiling; see
attached ceiling plan.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
Item No. Description Unit Quantity Unit Cost (Pesos) (Pesos)

3. Remove (E) floor tiles
and floor finishes. Embed new conduits
DUPA-8 & wiring devices; See attached dwgs. m2 1050.00
Coordinate with the Modular Partition
supplier for outlet locations. prepare
existing surfaces to receive new finish.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

4. Removed (E) ACU for re-
use/relocation. Return
DUPA-9 dismantled/unused materials to the units 33.00
owner. Prepare for (N) ceiling; See
reflected ceiling plan & mechanical
dwgs.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

5. Removed (E) Equipments,
electrical wiring & repair of roofing.
DUPA-10 Return dismantled / unused materials to lot 1.00
the owner for reused / refurbishing.
Prepare for (N) layout; see plans for
details
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date 0
Project #REF!
Amount
(Pesos)
6. Board ups (E) openings
DUPA-11 m2 31.75
with materials & finishes to match
existing
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
a. Glass Partition using ½ thk
DUPA-12 Tempered Glass and Patch Fittings Door m2 315.00
(Office of the Chairman and
Commissioners)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00

0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
b.Construct (N) 150mm thk. Reinf.
CHB wall (to extend to the underside of
DUPA-13 m2 45.00
the slab / beam). Securely fasten / weld
(N) rebars to (E) slab/beam
reinforcement; Plastered and latex
painted finished
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
c. (N) Marine board double wall
DUPA-14 covered with wall paper design submit m2 135.00
sample for approval. See plan for detail
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3.Architectural/Structural Works
d.Install (N) 300x600mm
DUPA-15 m2 250.00
homogeneous wall tiles (polished) at
toilet;submit sample for selection and
approval.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
b. D-02: 0.90 X 2.15 m
DUPA-16 45mm thk Tanguile solid core panel set/s 17.00
swing door with groove and
20mmx100mm solid wood casing (both
sides), submit sample for approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
b. D-02: 0.90 X 2.15 m
DUPA-17 45mm thk Tanguile solid core panel set/s 11.00
swing door with groove and
20mmx100mm solid wood casing (both
sides), submit sample for approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
c. D-03: 1.80 X 2.15 m
DUPA-18 Powder coated aluminum double acting set/s 2.00
swing door 10mm thk tempered frosted
glass for door panels,submit sample for
approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
d. D-04: 1.40 X 2.15 m
DUPA-19 set/s 1.00
12mm thk tempered frameless glass
door with frosted stripped film. See plan
for details, submit sample for approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
e. D-05: 0.90 X 2.15 m
45mm thk Hollow core flush sliding door,
DUPA-20 set/s 1.00
painted finish with 10mm thk clear
wired glass vision lite and solid wood top
panel & jambs, submit sample for
approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Item No. Description Unit Quantity Unit Cost (Pesos) Amount

(Pesos)
f. D-06: 0.90 X 2.10 m
45mm thk Tanguile (Marine Plywood)
DUPA-21 Hollow core flush swing door with set/s 10.00
bottom louvers for CR, submit sample
for approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
g. (N) Roll-up window
DUPA-22 shades and valance for Exterior and m2 120.00
interior windows
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3. Built-in Overhead
Cabinets, Counters, Modular Partitions
DUPA-23 Assembly and Furnitures sets 18.00
a. Advertising Poster
Stands 1.20x1.80m
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3. Built-in Overhead
Cabinets, Counters, Modular Partitions
Assembly and Furnitures
DUPA-24 lot 1.00
b. Furnitures for
Chairman and Commissioners (See
attached furniture plans for type and
location)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Unit Cost Amount

Item No. Description Unit Quantity
(Pesos) (Pesos)
3. Built-in Overhead Cabinets,
Counters, Modular Partitions Assembly and
DUPA-25 Furnitures set/s 5.00
c.OCH 1 Overhead cabinet assembly
including supports; for chairman and
commissioners; see details
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
C EQUIPMENT RENTAL Number Rate/day Number
Days
of
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
Counters and Accessories
DUPA-26 d. OCH 2 set/s 3.00
Overhead cabinet assembly including
supports; for chairman and
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
Counters and Accessories
DUPA-27 e. OCH 3 set/s 3.00
Overhead cabinet assembly including
supports; for chairman and
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Date

(Pesos)
Architectural Works
Counters, Modular Partition and
DUPA-28 Accessories lot 1.00
f. Modular Partition and table top
assembly with 3 drawers mobile
pedestal follow as per plan; submit
samples for approval by the owner.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
Architectural Works
4. Ceiling Finishes
a. CT1-(N) 10mm thk.x 600
DUPA-29 x 600 white acrylic panels on white t- m2 490.00
runners by CKM bldg materials Inc..
including shadow line trim (see plan for
detail)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
4. Ceiling Finishes
DUPA-30 b.CT2-(N) 24mm thk m2 450.00
seamless Acoustical Ceiling (see plan for
detail)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
Architectural Works
4. Ceiling Finishes
c. CT3-(N) 10mm
DUPA-31 thk.x 1200 x 2400 Boral Unispan Gypsum m2 290.00
Board Ceiling & downwall/soffit on
metal joists; including shadow line trim
(see plan for detail)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
Architectural Works
4. Ceiling Finishes
DUPA-32 d. (N) Drop wall and m2 135.00
door portal wood design; (see plan for
detail)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3. Architectural Works
5. Floor Finishes
a. Install (N)3mm
DUPA-33 thk 600X600mm Carpet Tiles (Gray) m2 262.15
Main offices of Chairman and
Commissioners; submit samples for
selection/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
5. Floor Finishes
b. Install (N)
200X1000mm Vitrified semi glazed wood
DUPA-34 m2 296.08
planks tile replica floor tile (Staff area,
pantry, receiving area & Board room
reception): submit samples for
selections/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Unit Cost Amount
Item No. Description Unit Quantity (Pesos) (Pesos)
5. Floor Finishes
c. Install (N)
DUPA-35 600X600mm Homogeneous floor Tiles m2 94.32
(white) Comm. Adamat and Darilag
Receiving area; submit samples for
selection/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3.Architectural Works
5. Floor Finishes
d. Install (N)3mm
DUPA-36 m2 161.59
thk 600X600mm Carpet Tiles (blue)
Conference Rooms; submit samples for
selection/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
5. Floor Finishes
e.Install
DUPA-37 (N)300X300mm Homogeneous floor tiles m2 28.04
for all CR; submit samples for
selection/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
5. Floor Finishes
f. Install (N)3mm
DUPA- 38 thk 600X600mm Carpet Tiles (brown) m2 20.00
VIP Waiting Lounge Office of the
Chairman; submit samples for
selection/approval
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
6. Toilet Accessories and Plumbing
DUPA-39 Works set/s 8.00
a. Hook/Bumper (To be installed at the
back of the toilet door)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3.Architectural Works
b. Toilet Paper Holder: Use Acasia 3443
by American Standard
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
c. Towel Bar: Use Acasia 3446 Towel
Bar by American Standard
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
d. Towel Ring (to be intalled near
lavatory)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
(Pesos)
DUPA-43 6. Toilet Accessories and Plumbing set/s 8.00
Works
e. Water Closet; see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
f. Granite counter top lavatory ; see
specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
g. Floor drain; Brass nickel-plated
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
h. Hand Spray (bidet); see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
6. Toilet Accessories
i. 6mm thk
DUPA-47 set/s 8.00
frameless (unbeveled) Face Quality Q2
Mirror on 20mm thk Marine Plywood
Backing
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date

(Pesos)
3. ARCHITECTURAL WORKS
DUPA-48 6. Toilet Accessories lot 1.00
j. Plumbing Works and
accessories
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3.ARCHITECTURAL WORKS
7. Painting/ Varnishing/
DUPA-49 Waxing Works (Including Prep & m2 320.00
Patching Works)
a. Masonry Surfaces
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. ARCHITECTURAL WORKS
7. Painting/ Varnishing/
DUPA-50 Waxing Works (Including Prep & m2 65.00
Patching Works)
b. Wooden Surfaces
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3.ARCHITECTURAL/STRUCTURAL
WORKS
7. Painting/ Varnishing/ Waxing Works
DUPA-51 m2 560.00
(Including Prep & Patching Works)
c. Gypsum
Board Surfaces
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
WORKS
8. Roofing Works and Water proofing of
concrete gutters
DUPA-52 a. Replacement of roofing at the m2 1400.00
Office of the Chairman and
Commissioners & installation of Roofing
going to Chairman's Board room (See
plan for details)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
WORKS
8. Roofing Works and Water proofing of
DUPA-52 m2 75.00
concrete gutters
b. Water proofing of concrete
deck and gutters
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date

(Pesos)
4.ELECTRICAL / MECHANICAL WORKS

1. Roughing-Ins,
DUPA-54 Conduits and Raceways (provide l.m. 2,993.00
detailed breakdown)
a. PVC Pipes 1/2" dia.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date

(Pesos)
4. ELECTRICAL / MECHANICAL WORKS
1. Roughing-Ins,
DUPA-55 Conduits and Raceways (provide pcs 1,041.00
detailed breakdown)
b. PVC adapater 1/2" dia.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
4.ELECTRICAL / MECHANICAL WORKS
1. Roughing-Ins,
DUPA-56 Conduits and Raceways (provide l.m. 70.00
detailed breakdown)
c. Wireway
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
ELECTRICAL / MECHANICAL WORKS
2. Wires and Cables
DUPA-57 (provide detailed breakdown) l.m. 4,845.00
a. Wires and Cables for
lighting layout
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
2. Wires and
Cables (provide detailed breakdown)
DUPA-58 l.m. 12,502.00
b. Wires and Cables for
Convenience outlet
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
DUPA-59 a.Three-gang set/s 14.00
Wall Push Switch, 16A, 250V (Panasonic
- With Light Swith)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
DUPA-60 b.Two-gang set/s 10.00
- With Light Swith)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
DUPA-61 c.One- gang set/s 18.00
- With Light Switch)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

3. Wiring Devices
DUPA-62 d. Three-Way set/s 3.00
Three-gang Wall Push Switch, 16A, 250V,
(Panasonic -With Light Switch)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount

3. Wiring Devices
DUPA-63 e.Three-Way set/s 8.00
Two-gang Wall Push Switch, 16A, 250V,
(Panasonic -With Light Switch)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
f.Duplex
DUPA-64 set/s 134.00
Universal Outlet with Ground and
Shutter, Panel Type, Panasonic Wide
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
OIC-Executive Director IV
Date
Amount
(Pesos)
3. Wiring Devices
g. Single
DUPA-65 set/s 49.00
Universal Outlet with Ground and
Shutter, Panel Tye, Panasonic Wide
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
h. Weather
DUPA-66 proof Duplex Universal Outlet with set/s 6.00
Ground and Shutter, Panel Type,
Panasonic Wide Series,16A, 250V; Verify
Specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
DUPA-67 set/s 578.00
i. Junction
box/Pull box
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
3. Wiring Devices
DUPA-68 set/s 42.00
j. Smoke
Detector; See specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
DUPA-69 3. Wiring Devices set/s 6.00
k. Heat Detector
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

4. Lighting / Ventilation
Fixtures/AC a. 2-
DUPA-70 36 Watts, fluorescent (ledlight) 600 x 1200 set/s 60.00
Recessed Mounted Powder Coated Fixture
with 100 x 100 mm egg-crate aluminum
reflector (matte finish); see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
DUPA-71 Ventilation Fixtures/AC set/s 17.00
b.1-36 W /18W fluorescent box
type (ledlight) surface mounted Fixture;
see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date

(Pesos)
4. Lighting /
Ventilation Fixtures/AC
DUPA-72 c.36 Watts LED Panel Light set/s 45.00
600mm x 600mm Flush Mounted
Fixture With Aluminum Housing; see
specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
DUPA-73 d. 18w plc cfl type 230v set/s 35.00
(daylight) horiz. Mounted on recess-
mounted fixture with tempered glass
cover; see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
e. 14 Watts, T5 fluorescent
(ledlight) Surface Mounted Fixture with
separate togle switch; see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
DUPA-75 f. 12w PLC cfl type 230v set/s 84.00
(ledlight) horiz. Mounted on recess-
mounted fixture with tempered glass
cover 200mm dia; see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
DUPA-76 4. Lighting / set/s 38.00
g. Emergency Light; see specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
h. Illuminated Exit signs; see
specs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

4. Lighting /
i.(N) Carrier or approved equal
DUPA-78 3HP, ACCU, Inverter, 230V, 60Hz, Single set/s 8.00
Phase, Wall Mounted, complete with
mounting brackets/accessories and
drain pipe to nearest catch basin; see
detail and mechanical dwgs.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

4. Lighting /
j. (N) Carrier or approved equal
DUPA-79 3TR ACCU Inverter, 230V, 60Hz, Single set/s 1.00
Phase, 60hz, Floor Mounted, complete
w/ mounting brackets/accessories and
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

4. Lighting /
l. (N) Carrier or approved equal,
DUPA-80 3TR ACCU Inverter, 230V, 60hz, Single set/s 9.00
Phase, Ceiling Mounted, complete w/
mounting brackets/accessories and
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

4. Lighting /
m.(N) Carrier or approved
DUPA-81 equal, 5TR, ACCU, Inverter, 230V, 60hz, set/s 1.00
Three Phase, Ceiling Mounted, complete
w/ mounting brackets/accessories and
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
4. Lighting /
DUPA-82 n. Ceiling-Mounted exhaust fan set 14.00
including ductwork, supports,
louver,bird screen and misc. accessories;
see mech dwgs
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
5. DATACOM WORKS, AUDIO VISUAL
AND CCTV SYSTEM
1. Roughing-Ins, Conduits and
DUPA-83 l.m. 1026.00
Raceways (provide detailed breakdown)
a. PVC
Pipes 3/4" dia
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-84 Raceways (provide detailed breakdown) pcs 352.00
b.
PVC adapter 3/4" dia.
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date

(Pesos)

AND CCTV SYSTEM
DUPA-85 1. Roughing-Ins, Conduits and Raceways l.m. 375.00
(provide detailed breakdown)
c. Wireway
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-86 Raceways (provide detailed breakdown) assy 3.00
d. Data
Cabinet
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

DUPA-87 AND CCTV SYSTEM set/s 50.00
2. Cables & Wiring
a. Data / VOIP Duplex Outlet
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
DUPA-88 set/s 12.00
2. Cables & Wiring
b. Wifi and wifi Outlet
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
DUPA-89 l.m. 3490.00
2. Cables & Wiring
c. CAT 6 Cables (Verify Specs)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
DUPA-90 set/s 14.00
2. Cables & Wiring
d. Telephone Outlet
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
2. Cables & Wiring
DUPA-91 lot 1.00
e.
Miscellaneous Materials and
Consumables
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
3. Conference Rooms Audio Visual
DUPA-92 set/s 4.00
Equipment
a. Active DSP-
controlled full range loudspeaker
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
Equipment
DUPA-93 b. Audio Mixer -12- set/s 2.00
Channel Mixing Console: Max. 6 Mic / 12
Line Inputs (4 mono + 4 stereo) / 2
GROUP Buses + 1 Stereo Bus / 2 AUX
(incl. FX)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-94 pcs 20.00
Equipment
c. Discussion
Microphones
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
DUPA-95 set/s 2.00
Equipment
d. Discussion System
Control Unit with Recorder
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)

AND CCTV SYSTEM
DUPA-96 set/s 2.00
Equipment
e. Media Presentation
switcher Extron 602 MA
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
AND CCTV SYSTEM
DUPA-97 Equipment set/s 2.00
f. Customized
Equipment Rack
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount

AND CCTV SYSTEM
DUPA-98 Equipment lot 1.00
g. Software, Cables,
Connectors, Brackets ,Consumables,
Installation and Extensive Training
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-99 Equipment units 6.00
h. Smart PTZ
conferencing camera (lumens or
approved equal)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
4. CCTV System (Verify Existing for
DUPA-100 capacity and compatibility) set/s 14.00
1. CCTV
Camera
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-101 set/s 1.00
capacity and compatibility)
2. CCTV
Monitor
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
AND CCTV SYSTEM
DUPA-102 capacity and compatibility) set/s 5.00
3. CCTV
Pullbox
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-103 set/s 1.00
4. CCTV
Control Equipment
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-104 capacity and compatibility) l.m. 20.00
5.
Roughing-Ins, Conduit and Raceways
(provide detailed breakdown)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-105 l.m. 1200.00
6. RG-59
Coaxial Cable (verify specs)
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
AND CCTV SYSTEM
DUPA-106 capacity and compatibility) lot 1.00
7.
Miscellaneous Materials and
Consumables
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
(Pesos)
OTHER ITEMS NEEDED TO COMPLETE
WORK:
DUPA-107 assy 5.00
1. Panel Board Surface Mounted Nema 1
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________
Date:_________________________________________
Date
Amount
(Pesos)
6. OTHER ITEMS NEEDED TO COMPLETE

WORK: (pls. specify)
DUPA-108 2. Roughing-Ins, Conduits and l.m. 1890.00
a. EMT
Pipes
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:
Position: _____________________________________

Date:_________________________________________
Date
Amount
DUPA-109 l.m. 150.00
b.
PVC Pipes
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________
Date
Amount
DUPA-110 set 1.00
c.
Addressable Fire Alarm Control Panel
A MATERIALS
SUB-TOTAL 0.00
SUB-TOTAL 0.00
SUB-TOTAL 0.00
Submitted by:

Position: _____________________________________

Date:_________________________________________

TWG Infra BOQ DUPA Forms Renovation of OCC

Uploaded by

Copyright:

Available Formats

TWG Infra BOQ DUPA Forms Renovation of OCC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TWG Infra BOQ DUPA Forms Renovation of OCC

Uploaded by

Copyright:

Available Formats

Project Title : Renovation of the CHED Central Office Building (Office of the Chairman and Commissioners)

Location : 4F CHED Building, C.P. Garcia Avenue, UP Diliman, Quezon City

1.0 GENERAL REQUIREMENTS

2. Remove (E) ceiling and (E) ceiling mounted 1,050.00 m2

3. Remove (E) floor tiles and floor finishes. Embed 1,050.00 m2

4. Removed (E) ACU for re-use/relocation. Return 33.00 units

5. Removed (E) Audio Visual Equipments, electrical 1.00 lot

6. Board ups (E) openings with materials & finishes to 31.75 m2

b. Construct (N) 150mm thk. Reinf. CHB wall (to 45.00 m2

c. (N) Marine board double wall covered with wall 135.00 m2

2. Doors and Windows

c. D-03: 1.80 X 2.15 m Powder coated aluminum 2.00 set/s

d. D-04: 1.40 X 2.15 m 12mm thk tempered frameless 1.00 set/s

f. D-06: 0.90 X 2.10 m 45mm thk Tanguile (Marine 10.00 set/s

g. (N) Roll-up window shades and valance for Exterior 120.00 m2

a. Advertising Poster Stands 1.20x1.80m 18.00 sets

c. OCH 1 Overhead cabinet assembly including 5.00 set/s

b. CT2-(N) 24mm thk seamless Acoustical Ceiling 450.00 m2

c. CT3-(N) 10mm thk.x 600 x 600 white acrylic panels 290.00 m2

b. Install (N) 200X1000mm Vitrified semi glazed wood 296.08 m2

c. Install (N) 600X600mm Homogeneous floor Tiles 94.32 m2

d. Install (N)3mm thk 600X600mm Carpet Tiles (blue) 161.59 m2

6. Toilet Accessories and Plumbing Works

a. Replacement of roofing at the Office of the 1,400.00 m2

b. Water proofing of concrete deck and gutters 75.00 m2

a. PVC Pipes 1/2" dia. 2,993.00 l.m.

f. Duplex Universal Outlet with Ground and Shutter, 134.00 set/s

h. Weather proof Duplex Universal Outlet with 6.00 set/s

b. 1-36 W /18W fluorescent box type (ledlight) surface 17.00 set/s

j. (N) Carrier or approved equal 3TR ACCU Inverter, 1.00 set/s

k. (N) Carrier or approved equal, 3TR ACCU Inverter, 9.00 set/s

l. (N) Carrier or approved equal, 5TR, ACCU, 1.00 set/s

m. Ceiling-Mounted exhaust fan including ductwork, 14.00 set

c. Discussion Microphones 20.00 pcs

6.0 OTHER ITEMS NEEDED TO COMPLETE WORK:

a. Cable wire 2.0mm² THHN 1,890.00 l.m.

Direct Cost (Item No. 1+2+3+4+5+6)

Company Name of Bidder: ________________________________________________

B LABOR COST Number Rate/day Number of Days

C EQUIPMENT RENTAL Number Rate/day Number of Days

Name of the Representative of the Bidder: __________________________________________

(Signature over Printed Name)

Company Name of Bidder: ________________________________________________

B LABOR COST Number Rate/day Number of Days

C EQUIPMENT RENTAL Number Rate/day Number of Days

Name of the Representative of the Bidder: __________________________________________

(Signature over Printed Name)

Company Name of Bidder: ________________________________________________

B LABOR COST Number Rate/day Number of Days

C EQUIPMENT RENTAL Number Rate/day Number of Days

Company Name of Bidder: ________________________________________________

B LABOR COST Number Rate/day Number of Days

C EQUIPMENT RENTAL Number Rate/day Number of Days

Name of the Representative of the Bidder: __________________________________________

(Signature over Printed Name)

Company Name of Bidder: ________________________________________________

B LABOR COST Number Rate/day Number of Days

C EQUIPMENT RENTAL Number Rate/day Number of Days

Name of the Representative of the Bidder: __________________________________________