Irussor - 2021 (Sor) 28 - 07 - 2022

भारत सरकार
GOVERNMENT OF INDIA
रे ल मं त्रालय
MINISTRY OF RAILWAYS
भारतीय रे ल एकीकृ त मानक दर

अनु सू ची
(फॉमे श न कायय , पू ल कायय एवं पी वे कायय )
Indian Railways
Unified Standard Schedule of Rates
(Formation Works, Bridge Works and P. Way Works)
इं जीननयररं ग नवभाग
Engineering Department
दर अनु सू ची
Schedule of Rates
2021
Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken
for estimation or justifying rate. This amount/rate has been given for illustration purpose only.
IR Unified Standard Schedule of Rates 2021
INDEX
Sl.No Description Page No.
A General and Operating Instructions 1

B CHAPTERS
1 Earth Work 3
2 Bridge Works - Substructure 8
3 Bridge Works - Super Structure (RCC) 20
4 Bridge Works - Super Structure (Steel) 27
5 Bridge Works - Misc. 36
6 Rails, Sleepers and Fittings Renewal 42
7 Turnouts and Renewals 48
8 Deep Screening and Ballast Related Activities 57
9 Welding Activities 61
10 Reconditioning of Points and Crossings 67
11 Formation Rehabilitation 70
12 Activities at Construction Sites 73
13 Maintenance Activities 79
14 Testing of Rails and other Components 88
15 Heavy Track Machines 91
16 Small Track Machines 101
17 Handling of Materials 104
18 Level Crossings 109
19 Bridge Related Activities 116
20 Supply of P.Way Materials 121
21 Miscellaneous Items 125

IR Unified Standard Schedule of Rates - 2021 General and Operating Instructions
General and Operating Instructions

1. General Instructions:
1.1 These instructions & guidelines are applicable for all items included in all Chapters for Railway
Formation Works, Bridge Works and P. Way Works.
1.2 Cost of cement and reinforcement steels is not included in any item except where specifically
mentioned otherwise in the item.
1.3 Design Mix Cement Concrete of all grades will be paid at same rate irrespective of grade
mentioned in the item. Grade mentioned is for guidance purpose. However, grade of RCC to
be used at site shall be mentioned in the BOQ.
1.4 Automatic digital weigh Batching, mixing and placing, preferably mobile RMC plant shall be
used for design mix concrete. Concrete mixer shall be used for small quantity for nominal
mix only with the permission of Engineer-in charge. Placement of concrete shall be done by
concrete pump in general.
1.5 Cost of Admixture (plasticizer / super-plasticizer) is included in the item of design mix concrete.
1.6 Payment for cement shall be made extra wherever mentioned in the item for the quantity as per
approved design mix subjected to minimum and maximum limit as prescribed in IS 456. For
nominal mix and other misc items, it shall be as per standard consumption enclosed separately
with this USSOR.
1.7 Cost of shuttering, wherever required, shall be paid separately and is not included in the rate
of item except where specifically mentioned otherwise. Shuttering shall be paid only for the
shuttering area coming in contact with the concrete surface.
1.8 For steel fabrication work, the cost of welding/riveting has been incorporated in the item rate
and no addition on nominal weight of the sections as specified in the drawings shall be
applicable on account of welding/riveting. HSFG bolts, where used, shall be payable.
1.9 The rate of an item includes:
(i) Cost of all labor, materials, tools & plants, machinery, transportation to the site of
work, all lead & lift, handling, re-handling, erection, testing, supervision & maintenance
for executing the work at site in all respect, unless mentioned specifically otherwise in
the description of an item, required for design, fabrication, execution and testing the
work, conforming to all applicable codes, specifications, manuals and guidelines.
(ii) GST & other taxes, royalties, duties, cess, levies or any other fees that may be
payable under any Central Government, State Government or other Local Bodies Acts
or Rules, mandatory insurance, profit etc.
1.10 Uniform rate of GST apllicable for works contract @12%, Water Charges@ 1% (except supply
items), Contractor's Profit & Overheads (CPOH) @ 15% and Cess @ 1% have been adopted
for all items while arriving at the Rate.
1.11 Procedure for Deletion of Item from “Standard Schedule of Rates”: PCE shall be the
authority to ban execution of any particular item on the Zonal Railway, if they find that the
particular item is not suitable to their Railway system due to any reason.
For this purpose, the item may not be deleted from SOR; but only a letter under the signature
of PCE shall be circulated to all concerned on his Railway, informing the list of items which
shall not be operated by field units, in case, PCE is of the opinion that any particular item
included in ‘Unified Standard SOR’ is having adverse effect and needs to be deleted from it.
The matter shall be referred to Railway Board, which will take necessary decision.
1
IR Unified Standard Schedule of Rates - 2021 General and Operating Instructions
2. Operating Instructions
Numbering System Of SOR Items –
2.1 The system of numbering SOR items has been adopted for easy identification of item and
linkage between item number & description of item. Each Item number of SOR consists of 6
numeric digits, as detailed below:
2.1.1 First 2 digits (left side) indicate Chapter no. e.g. from 01 to 21.
2.1.2 Next one digit indicates Sub-Group within the Chapter.
2.1.3 Next 2 digits are Main Item nos. within one Sub-group.
2.1.4 Next one digit, i.e. right-most digit indicates Sub-item within the main item.
3. Units used in IRUSSOR

Wherever "Each" has been used as Unit in any item, it should be read in comjunction with the
Description of the item. Short forms of "Unit" are used as under at different places:
TRM Track Metre
RM Running Metre
CuCm Cubic Centimetre
Cudm Cubic Decimetre
Cum Cubic Metre
Sq Cm Square Centimetre
Sqm Square Metre
KM Kilometre
MT Metric Tonne
MT KM Metric Tonne Kilometre
Kg Kilogram
2
IR Unified Standard Schedule of Rates -2021 Chapter -1: Earth Work
CHAPTER - 1 : Earth Work

Item No. Description of Item Unit Rate (₹)
011000 Earthwork in New Lines, Doubling Projects Etc. - Embankments
011010 Preparation of foundation for Embankment by clearing, grubbing, 100 Sqm 566.36
stripping top soil (average 150 mm) and stacking beyond foundation
area, thereafter ploughing and pulverizing 150 - 200 mm of top of soil
with tractor trolley, mixing water to achieve OMC with water sprinkler
or left for natural drying, as required, and compaction with vibratory
roller of suitable capacity to achieve 98% MDD for laying first layer of
soil for embankment construction.
011020 Benching of existing embankment manually in steps of 30 cm height Km 105,340.29

for doubling/tripling works in running line to provide proper
amalgamation between the old and new embankments as per RDSO
latest Specifications and guidelines RDSO/2020//GE: IRS-0004 to the
entire satisfaction of Engineer in-charge. The item includes uprooting
and disposing of all the vegetation, all lift, descends, ascends and
additional earthwork required for filling due to removal of earth in
benching in existing bank.
Note:
(1) The benching Work shall be done for a maximum height of 0.90 m
at any time based on the progress of earthwork starting from toe of
the embankment.
(2) Benching work shall be certified and recorded before starting the
earth work.
(3) Unit for payment shall be km per metre height of the Bank. Height
here means representative average height of the bank in the specified
km taken from cross sectional measurements for earthwork.
(4) Since the rate includes earthwork in steps, payment under this item
shall be made after completion of earthwork to that level.
(5) Cut soil from bank shall not be used in embankment construction
and disposed off away from bank as per the direction of Engineer-in-
charge.
011030 Earthwork in filling in embankment, guide bunds, around buried type

abutments, bridge gaps, trolley refuges, platforms etc. with
contractor's own earth conforming to Soil Quality Class
SQ1/SQ2/SQ3, after preparation of foundations as applicable,
benching in existing banks wherever required, spreading in layers with
motor grader, bringing the moisture content to OMC, mechanical
compaction to specified density and dressing of bank to final profile
as per RDSO Specifications: RDSO/2020/GE: IRS-0004 with latest
correction slips.
Note:
1) Foundation preparation, Benching including additional earthwork on
account of this, wherever required, shall be paid extra under relevant
schedule item for benching.
2) Payment for Earthwork under this item shall be made based on the
cross section measurements calculated (i) with original ground profile
of existing bank based on initial ground levels before doing benching
and (ii) final profile of the bank worked out with final levels as per
prevailing guidelines.
011031 Using Soil Class SQ1 Cum 188.26

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying
rate. This amount/rate has been given for illustration purpose only.
3

012000 Earthwork in New Lines, Doubling Projects Etc. - Cuttings
012010 Earthwork in cutting in formation, trolley refuges, side drains, level
crossing approaches, platforms, catch water drains, diversion of nallah
& finishing to required dimension and slopes to obtain a neat
appearance to standard profile inclusive of all labour, materials, plant
& machinery, leading all cut spoils either to make spoil dumps or for
filling in embankment with leads within 2 km on either side of edge of
the cutting(s) including all lifts, ascent, descent, loading, unloading,
bailing & pumping out water, if required, clearance of site and all other
works incidental thereto for completing the work as per RDSO
Specification No. RDSO/2020/GE: IRS-0004 with latest updated
correction slips and to the satisfaction of the Engineer-in-Charge.
Note:
(i) All usable earth arising from cut spoils shall be led into bank
formation and Unusable spoils shall be dumped / stacked away from
toe of embankment.
(ii) All hard rock /and boulders not fit for filling will be stacked by the
contractor and will be property of the Railways.
(iii)Cut trees shall be property of Railways and to be deposited in the
railway godown unless specified otherwise in the Conditions of
Contract.
012011 In all conditions and classifications of soil except rock Cum 103.66
012012 Soft rock not requiring blasting Cum 235.77
012013 In hard rock requiring blasting Cum 341.53
012014 In hard rock with hammer / chisel / pavement breaker etc. where Cum 842.58
blasting is not permitted due to special circumstances and if
specifically ordered in writing including drilling and all incidental works
thereto.
012015 Extra for leading of Cut spoil every one km beyond original lead of 2 Cum 5.44
km over item nos. 012011 to 012014
012020 Foundation preparation in cutting - ploughing and pulverizing 15 cm of 100 Sqm 300.90
top of soil with tractor trolley, mixing water to achieve OMC with water
sprinkler or allowing for natural drying, as required, and compaction
with vibratory roller of suitable capacity to achieve 98% MDD for laying
blanketing layer.
012030 Mechanical manufacturing of blanketing material by using only hard Cum 1,639.34
and durable stone crushed in mechanical crusher to different
gradations, wet mixing of the same in designed proportion in Pug mill
or wet mix plant to have uniform gradation including all incidental
transportation, laying over finished formation in uniform layer(s) with
motor grader, compaction with suitable vibratory roller to specified
density and finishing to correct profile, complete as per RDSO
Specification No. RDSO/2020/GE: IRS-0004 with latest correction
slips.
Note: This item shall be used only when entire constituent of
blanketing material is mechanically manufactured by crushing of hard
and durable stone into desired gradation of designed proportion.
4

012040 Manufacturing of blanketing material by wet mixing of naturally Cum 794.75
available suitable soil including additional blending with naturally
available or manufactured material as required to achieve specified
gradation, in designed proportion in Pug mill or wet mix plant to have
uniform gradation including all incidental transportation, laying over
finished formation in uniform layer(s) with motor grader, compaction
with suitable vibratory roller to specified density and finishing to correct
profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-
0004 with latest correction slips.
012050 Mechanical manufacturing and supply of blanketing material by using Cum 1,202.22
only hard and durable stone crushed in mechanical crusher to different
gradations, wet mixing of the same in designed proportion in Pug mill
or wet mix plant to have uniform gradation as per RDSO Specification
No. RDSO/2020/GE: IRS-0004 with latest correction slips including
transportation to nominated place and stacking.
Note:
1.This item shall be used only when entire constituent of blanketing
material is mechanically manufactured by crushing of hard and
durable stone into desired gradation(s) in designed proportion to meet
prescribed Specification.
2. Measurement shall be done as per Stack measurement.
012060 Manufacturing and supply of blanketing material by wet mixing of Cum 560.98
different types of naturally available suitable soil including additional
blending with naturally available or manufactured material as required
to achieve specified gradation, in designed proportion in Pug mill or
wet mix plant to have uniform gradation as per RDSO Specification
No. RDSO/2020/GE: IRS-0004 with latest correction slips including all
incidental transportation and stacking at site in Stacks.
Note: Measurement shall be done in as per Stack measurement.
013000 Miscellaneous
013010 Felling trees of girth (measured at a height of 1.0 m above ground
level) including leading and stacking of material within 100m.
Note : 1. When stumps are grubbed up in addition, the rates shall be
doubled for trees cut and grubbed 2. Payment for grubbing shall only
be made where specially ordered. 3. Grubbing shall be ordered only
where it is essential to remove the stumps, including the roots, as per
specification. 4. Grubbing shall include removal of roots of trees and
saplings to a depth of 60cm below ground level or 30 cm below
formation level or 15 cm below sub grade level, whichever is lower.
013011 Girth over 30 cm and up to 60 cm Each 299.03

013012 Girth over 60 cm and up to 1.5m Each 825.24
013013 Girth over 1.5m up to 3 m Each 1,643.79
013014 Girth over 3 m Each 2,754.68
013020 Turfing / planting, including all lead & lift and watering as required until
properly rooted with.
Note: Initially payment of only 40% will be made. Balance 60% will be
paid after 3 months of maintenance period, only if the turfing is
properly rooted on entire turfed area.
013021 Turfing with sods, 10cm thick and 20cm square closely laid. 100 Sqm 5,846.79
5

013022 Turfing with planted doob grass. 100 Sqm 5,652.79
013023 Planting Sarkanda / sarpat or any other suitable species approved by 100 Sqm 6,579.98
the engineer.
013030 Cleaning out silt from bed of reservoir/canals including 50m lead and Cum 176.74
lift up to 1.5m.
013040 Providing portable fencing along running track where work is to be
done in close vicinity of track, maintaining during execution of work
and removing after completion of the work as per direction of the
Engineer. Fencing shall consist of self supporting steel angles of size
50mm x 50mm x 6mm, 1.5m long provided with hooks etc. and
embedded in CC 1:2:4 block of size 0.23m x 0.23m x 0.23m placed at
c/c distance of 2m along track. 12mm dia rods in three horizontal
layers shall be tack welded with angle posts.
Note : Released material will be property of the contractor after
completion of work. Cost of cement required for CC blocks shall be
paid separately.
013041 With provision of one 50mm wide retro-reflective tape in horizontal Metre 190.15
direction, duly secured/tight with vertical posts.
013042 With provision of painting verticals & horizontals with red luminous Metre 103.16
paints / strips of 30cm each with a gap of 30 cm.
013050 Provision of barricading with contractor's bamboos / ballies vertical
post of 100mm dia. planted at every 2m interval, projecting at least
1.5m above ground level and driven firmly (minimum 0.5m) inside
ground and including painting verticals & horizontals with red luminous
paints / strips at alternative bay on barricade. Barricades shall be
maintained through out the execution of the work and shall be
removed in workman like manner on completion of the work only after
instruction of Engineer in-Charge.
Note:
(1) 60% payment shall be made on provision of barricading at work-
site and balance 40% payment after removal of barricades.
(2) The released bamboos / ballies shall be the property of the
Contractor.
013051 With 3 horizontal bamboo / balli members of minimum 50mm dia. RM 134.14
spaced equally
013052 Joining with strong nylon rope in one cross and one horizontal pattern RM 78.83
of minimum 5mm dia.
013060 Supplying, driving and erecting in all types of soils, hard wood pile 5m Metre 183.08
to 7m long without joint, 125mm average dia. for protection of bank
slope including two coats of coal tar paint complete, as directed.
Note: Payment will be made as per actual driven length of pile.
013070 Driving rails 90R/52 Kg section below average ground level within the Metre 94.90
slope/toe of embankment including making of nose with contractor’s
own arrangement complete in all respect
Note: Payment will be made as per actual driven length of rail which
will be supplied free by Railways at the site of work.
6

013080 Shoring with 'Z' section MS sheet piles side by side in all kinds of soil Sqm 833.40
mechanically or manually as per approved drawing with contractor’s
own arrangement complete in all respects and removal of sheet piles
after completion of the work as directed by engineer in-charge
Note: Payment will be made as per actual driven length of pile.
013090 Supplying, laying Non-woven Needle Punched and Mechanically or

Thermally bonded type Geotextile for use as Separator/Filtration for
Railway formation as per RDSO Specification No.
RDSO/2018/GE:IRS-0004 - Part I made of Polypropylene /
Polyethylene / Polyamide or combination there of having apparent
opening size of less than or equal to 85 microns and elongation at
failure more than 50% in both directions including transportation
labour, lead & lift complete as directed by Engineer in-charge.
013091 On top of subgrade or prepared subgrade before laying blanketing Sqm 150.82
layer with minimum strengths in Grab test, Trapezoidal Tear test and
Puncture test of 700N, 250 N and 1800 N respectively.
013092 Below the ballast and above blanket layer with minimum strengths in Sqm 268.56
Grab test, Trapezoidal Tear test and Puncture test of 1750N, 800 N
and 5800 N respectively.
013100 Supplying & laying of drainage composite for use behind abutments, Sqm 680.64
wing walls, return walls and Retaining walls Geocomposite drain
(Vertical) as per RDSO Specification No. RDSO/2018/GE:IRS-0006
latest version with all material, labour, equipment, tools and plants,
lead, lift etc. complete in all respects as per the direction of Engineer-
in-Charge.
7
IR Unified Standard Schedule of Rates -2021 Chapter -2: Bridge Works - Substructure
CHAPTER - 2 : Bridge Works - Substructure

021000 Soil Exploration and Testing
021010 Exploratory drilling of boreholes down to required depth, drilling of
150mm dia. boreholes in all type of soils except hard rock & large
boulders (boulder core more than 30cm) including refilling, reinstating
surface and disposing off surplus material including use of mechanical
rigs with power operated winches as well as percussion/chiselling tool
for advancing through occasional seams of hard strata to be
employed, where necessary in Dry area.
021011 0m to 10m Metre 1,065.00

021012 10m to 20m Metre 1,118.52
021013 20m to 30m Metre 1,177.39
021014 30m to 40m Metre 1,277.73
021015 40m to 50m Metre 1,471.73
021016 50m to 60m Metre 1,739.32
021017 60 m to 70 m Metre 1,873.11
021020 Exploratory drilling of Boreholes down to required depth, drilling of
150mm diameter boreholes in all type of soils except hard rock and
large boulders (boulder core more than 30cm), including refilling,
reinstating surface and disposing off surplus material including use of
mechanical rigs with power operated winches as well as percussion /
chiselling tool for advancing through occasional seams of hard strata
to be employed where necessary in River bed area including
standing/flowing water with all necessary arrangements except
making of platform under water which shall be paid under relevant
item of SOR.
021021 0m to 10m Metre 1,278.00
021022 10m to 20m Metre 1,342.22
021023 20m to 30m Metre 1,412.86
021024 30m to 40m Metre 1,533.28
021025 40m to 50m Metre 1,766.08
021026 50m to 60m Metre 2,087.18
021027 60m to 70m Metre 2,247.74
021030 Extra for 150mm dia. bore in hard Rock/large Boulder at all levels Metre 1,992.19
021040 Erection of temporary working platform to drill bore hole through Cum 2,264.01
flowing/standing water through river bed up to water depth of 1.5m,
and dismantling after completing work and removing from the site to
clear the water way.
021050 Drilling of NX size borehole (75mm dia.) in all types of hard rock and
collection of rock core samples from boreholes and preserving in
boxes.
021051 0m to 10m Metre 3,055.85
021052 10m to 20m Metre 3,209.71
021053 20m to 30m Metre 3,422.44
021054 30m to 40m Metre 3,667.29
021055 40m to 50m Metre 3,793.05
021056 50m to 60m Metre 4,088.74
8

021057 60m to 70m Metre 4,415.19
021060 Conducting in-situ full size Plate Load Test (PLT) at selected location
as per IS:1888 including making loading arrangements & casting of
RCC/cast in-situ concrete footing as per codal provisions including
excavation and refilling of trial pit.
021061 Plate size 30cm x 30cm Each 20,069.06
021070 Conducting in situ Vane shear test for soil as per IS:4434 Each 2,943.46
021080 Conducting SCPT for soil as per IS:4968 Each 46,827.82
021090 Conducting DCPT for soil as per IS:4968 Each 38,800.19
021100 Conducting determination of California Bearing Ratio as per IS:2720 Each 1,337.94
021110 Taking out 100mm dia. & 450mm long undisturbed samples of soil Each 137.81
from bore holes, including provision of air tight containers for packing
and, labeling incl. transporting the samples to laboratory. Piston
sampler shall be used for extracting undisturbed samples where
necessary. Samples shall be collected as per IS:2720.
021120 Taking out 100mm dia. & 450mm long disturbed samples of soil from Each 147.17
bore holes, including provision of air tight containers for packing,
labeling and transporting the samples to laboratory. Samples shall be
collected as per IS:2720.
021130 Conducting standard penetration test as per IS:2131 at Each 802.76

approximate1.5m intervals in bore holes, as directed by the Engineer
in charge
021140 Collection of water samples at required intervals Each 227.45
021150 Conducting laboratory Tests on collected soil samples as per relevant
IS code
021151 Moisture Content/Dry Density Each 267.59
021152 Atterberg Limits Each 535.18
021153 Specific Gravity Each 535.18
021154 Grain size analysis including Hydrometer analysis Each 735.87
021155 Direct Shear Test Each 2,006.91
021156 Natural Density Each 602.07
021157 Consolidation Test Each 6,689.69
021158 Unconfined Compression Test Each 2,006.91
021159 Tri-axial Test Each 2,006.91
021160 Conducting Laboratory tests on collected ROCK SAMPLES as per
relevant IS code
021161 Density Test Each 267.59
021162 Water Absorption & Porosity Each 267.59
021163 Hardness Each 133.79
021164 Unconfined Compression Test Each 2,006.91
021165 Point Load Test Each 1,070.35
021166 Modulus of Elasticity Each 5,351.75
021167 Abrasion Testing Each 602.07
9

021170 Conducting chemical analysis of ground water samples to determine Each 1,337.94
suitability for concreting and aggressiveness in relation to attack on
concrete / reinforcement including determination of pH value.
021180 Conducting chemical analysis of soil samples to determine Each 1,337.94

aggressiveness in relation to attack on concrete / reinforcement
including determination of pH value
022000 Open Foundation and Pile Foundation
022010 Earthwork in excavation by mechanical means (Hydraulic
Excavator)/Manual Means for foundations and floors of the bridges,
retaining walls etc. including setting out, dressing of sides, ramming of
bottom, getting out the excavated material, back filling in layers with
approved material and consolidation of the layers by ramming and
watering etc. including all lift, disposal of surplus soil up to a lead of
300m, all types of shoring and strutting with all labour and material
complete as per drawing and technical specification as directed by
Engineer in charge.
Note: This item will be used for excavation work in connection with
other miscellaneous works also like side drains, foundation for OHE
masts and other miscellaneous structures in connection with Gauge
Conversion, Doubling, New lines.
022011 All kinds of soils Cum 186.58

022012 Soft rock (not requiring blasting) Cum 381.72
022013 Hard rock (requiring blasting) Cum 697.62
022014 Hard rock (blasting prohibited ) Cum 1,042.54
022020 Extra over item nos. 022011 to 022014 for executing the work under Cum 20%
water and/or liquid mud to compensate all additional arrangements
including pumping out water as required.
Note: The extra percentage rate is applicable only for the quantity of
work executed under water.
022030 Providing and laying in position Plain cement concrete of specified
Nominal Mix for miscellaneous works like side drains, foundation for
OHE masts and other miscellaneous structures excluding the cost of
Cement, centering and shuttering - All work up to plinth level :
022031 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone Cum 2,448.15
aggregate 20 mm nominal size)
022032 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate Cum 2,529.25
20 mm nominal size)
022033 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate Cum 2,497.44
40 mm nominal size)
022034 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate Cum 2,599.67
20 mm nominal size)
022035 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate Cum 2,529.65
40 mm nominal size).
022036 1:4:8 (1 Cement : 4coarse sand (zone-III): 8 graded stone aggregate Cum 2,558.78
40 mm nominal size).
10

022040 Providing and laying in position machine batched, machine mixed and Cum 2,592.84
machine vibrated Cement Concrete of specified grade as per
approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant
at site or RMC from approved plants) using 20mm graded crushed
stone aggregate and coarse sand of approved quality in RCC raft
foundation & Pile cap including finishing, using Plasticiser in approved
proportions (as per IS:9103), to modify workability without impairing
strength and durability complete as per specifications and direction of
the Engineer in charge.
Note:
1. Payment for cement, reinforcement and shuttering shall be made
extra under relevant item.
2. Plasticiser shall invariably be used in approved proportion to
increase workability with minimum possible quantity of cement for all
grade of Design Mix Concrete unless it is specifically approved citing
reasons for not using plasticiser at the stage of Mix Design and in that
case deduction shall be made as per relevant item.
022050 Providing and laying in position machine batched, machine mixed and
stone aggregate and coarse sand of approved quality for the following
Reinforced cement concrete structural elements up to height of 9.0 m
from foundation top level, including finishing, using Plasticiser in
approved proportions (as per IS:9103), to modify workability without
impairing strength and durability complete as per specifications and
direction of the Engineer in charge.
Note:
022051 Abutment & Pier Cum 2,664.23
022052 Wing wall and Return wall Cum 2,664.23
022053 Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier Cum 2,699.92
cap, Fender wall, Diaphragm wall etc.
022054 Approach slab at formation level, Dirt wall/ ballast wall at formation Cum 2,628.53
level
022055 Extra for every increase of 1m or part thereof in the height above 9.0 Cum 71.39
m
022060 Providing and laying Plain Cement Concrete 1:3:6 with graded stone Cum 2,559.13
aggregate of 40mm nominal size, in foundation and floors, retaining
walls of bridges including mechanical mixing, vibrating, pumping and
bailing out water where ever required with all materials and labour
complete but excluding the cost of cement and shuttering as per
drawings and technical specifications as directed by Engineer.
11

022070 Providing and fixing Weep Holes in Abutments, Wing walls and Return Metre 231.70
walls etc., of new bridges with 110mm dia UPVC pipe Type A ISI
marked with all contractor's men, material, transportation, all taxes as
per specifications and as directed by Engineer-in-Charge.
022080 Boring, providing and installation of bored cast in-situ Reinforced

Cement Concrete piles of specified diameter and length below pile cap
of specified grade with Design Mix Cement Concrete, using 20mm
graded crushed stone aggregate and coarse sand of approved quality,
to carry a safe working load not less than specified, concreting by
machine batching, machine mixing, scaffolding, using Admixture in
approved proportion (as per IS:9103), placing with tremie pipe,
chipping off of pile top to remove laitance concrete above cut off level
etc., pumping and bailing out water, by percussion drilling using Direct
Mud Circulation (DMC) or Bailor and Chisel technique by tripod and
mechanical Winch machine, complete in all respect as per approved
drawing, specification and direction of the Engineer in charge.
Note:
1. Payment for only cement, reinforcement and permanent casing
pipe (if any ) shall be made extra.
2. Length of the pile for payment shall be measured up to the bottom
of RCC pile cap.
022081 1500 mm diameter Metre 7,793.41

022082 1200mm diameter Metre 5,282.08
12

022090 Boring, providing and installation of bored cast in-situ Reinforced
Cement Concrete piles using Hydraulic piling Rig of specified diameter
and length below pile cap of specified grade with Design Mix Cement
Concrete, using 20mm graded crushed stone aggregate and coarse
sand of approved quality, to carry a safe working load not less than
specified, concreting by machine batching, machine mixing,
scaffolding, using Admixture in approved proportion (as per IS:9103),
placing with tremie pipe, chipping off of pile top to remove laitance
concrete above cut off level etc., pumping and bailing out water
complete in all respect as per approved drawing, specification and
direction of the Engineer in charge.
Note:
1. Payment for only cement, reinforcement shall be made extra.
2. Length of the pile for payment shall be measured up to the bottom
of RCC pile Cap.
022091 1500 mm diameter Metre 11,112.99

022100 Providing, fabricating and installing permanent casing pipe for bored MT 107,851.02
piles for all diameters with specified thickness of steel plate including
all labour, materials, tools & complete as per approved drawing &
specifications complete in all respect as per the direction of Engineer
in charge.
Note: Payment shall be made as per the weight of circular plate of
casing pipe only.
022110 Extra for chiselling in addition to boring of piles, if chiselling is
required to be resorted to in hard rock or big stone boulders larger
than 30cm, manually or by any other means.
022111 1200mm diameter pile Metre 4,102.00
022120 Conducting load test of a single pile up to specified capacity in
accordance with IS:2911 (Part-IV) including installation of loading
platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. with all labour, material, tool &
plants, equipment, machinery, etc. complete as per drawing and
specification, as directed by the Engineer.
022121 Initial load test up to 50 ton capacity pile Each 50,844.98
022122 Initial load test above 50 ton and up to 100 T capacity pile Each 61,672.84
022123 Initial load test above 100 ton and up to 250 T capacity pile Each 83,063.16
022124 Extra for every increase of 50 ton in pile capacity or part thereof over Each 4,566.25
250 ton
13

022125 Routine Load Test up to 50 ton capacity pile Each 25,422.49
022126 Routine Load Test above 50 ton capacity up to 100 ton capacity pile Each 30,836.42
022127 Routine Load Test above 100 ton capacity up to 250 ton capacity pile Each 41,531.58
022130 Lateral load testing of single pile in accordance with "IS Code of
practice IS:2911 (Part-IV) for determining safe allowable lateral load of
pile” with all labour, material, tool & plants, equipment, machinery, etc
complete as per drawing and specification as directed by the
Engineer.
022131 Piles with lateral load capacity of up to 50 ton Each 19,186.03
022132 Piles with lateral load capacity of above 50 ton and up to 100 ton Each 29,086.76
022140 Pulse Echo Test (PET) for integrity testing of piles with contractor’s Each 2,809.67
men, materials and machines. The rate includes cost of Inspection of
site, preparation of pile head and any other unforeseen cost required
for the test, submission of reports in triplicate as per satisfaction of the
Engineer in Charge.
023000 Well Foundation
023010 Earth work in OPEN excavation in foundation of bridges, for placing of
well curbs of all shapes and designs in all kinds of soil including taking
out the excavated soil, levelling, ramming of bottom of excavation and
trimming of sides, returning the soil in layers, consolidation, disposal of
surplus soil within a lead of 300m, including all lift, dewatering, shoring
and strutting complete as per technical specification and as directed
by Engineer in charge.
023011 In all types of soils Cum 279.87

023012 In Ordinary rock Cum 419.89
023013 Hard rock (blasting prohibited ) Cum 1,146.79
023020 Providing and constructing Temporary Earthen Island / coffer dam for
construction of well foundations of dia. up to 10m (longest dimension) ,
including bailing and pumping out of water, provision of sand bags,
wooden ballies, sheet piling, earth, sand or any other suitable material,
as required with all labour and material complete job.
023021 For water depth up to 1.00m Each 49,195.70

023022 Extra for every 1.00m additional depth and part thereof over item Each 80,705.02
023021 up to water depth of 4.00m.
023023 Providing and constructing 10m wide service road to reach island RM 3,380.83
location from one pier location to another pier location.
14

023030 Supplying, Fabrication, assembly, erection & placing in position the MT 123,109.45
cutting edge of well curb with structural steel including MS
sheet/Plates of specified thickness for pier/abutment complete as
per approved plans and as per direction of Engineering In charge
including all operations like cutting, bending, straightening, drilling
holes, bolting, riveting, welding, threading, jointing of steel sections
including outer and inner places liners and skin plates, stiffeners,
hooks, bottle nuts, bond rods etc. as per design including all ascent,
descents, leads, lifts, handing, re-handling, all other obstructions
whatsoever, diverting channels, pumping / bailing out of water
wherever required including cost of steel such as flats, sheets, angles,
steel bars etc. with all labour and material as a complete job.
023040 Dry/Wet Sinking of Circular Wells (Other than pneumatic method) in

all types of strata except hard rock requiring blasting, including bailing
and pumping out water, removal of excavated soil with all labour and
material required for sinking as per drawing and direction of the
Engineer in charge, disposal of surplus soil in the adjoining
bank/embankment..
023041 From initial level of cutting edge & up to 3m depth Cum 180.19
023042 Above 3m to 10m depth Cum 238.40
023047 Above 30m to 35m depth Cum 1,289.95
023050 Above 45 m depth Cum 4,012.39
023060 Dry/Wet Sinking of Twin D type Wells (Other than pneumatic method)
in all types of strata except hard rock requiring blasting, including
bailing and pumping out water, removal of excavated soil, with all
labour and material required for sinking as per drawing and direction of
the Engineer in charge including disposal of surplus soil in the
adjoining bank/embankment (compaction to be paid separately under
the relevant item).
023061 From initial level of cutting edge & up to 3m depth Cum 260.74
023070 Above 45 m depth Cum 4,976.13
023080 Extra for sinking of wells in hard rock requiring controlled blasting Cum 662.30
including cost of explosive, detonators, chiselling including all other
ancillary works
15

approved Design Mix (Cast in-Situ) using 20mm graded crushed
stone aggregate and coarse sand of approved quality in the following
elements of well including finishing, using Plasticiser in approved
strength and durability complete as per drawings and technical
specifications as directed by Engineer.
Note:
reasons at the stage of Mix Design and in that case deduction shall
be made as per relevant item.
023091 In well Curb Cum 2,852.12

023092 In Steining of wells Cum 2,852.12
023093 In Bottom plug for wells including arrangements for placing concrete Cum 2,852.12
under water with tremie or bottom opening skips.
023094 In Intermediate/top plug without shuttering Cum 2,722.48
023095 In Intermediate/Top plug with internal shuttering Cum 2,722.48
023096 In Well cap and corbel, if provided Cum 2,722.48
023100 Supplying and filling ordinary sand in between bottom plug and top
plug in wells including all lead lift handling, re-handling, as a complete
job as per specification and guidelines.
023101 Using Sand from River Bed if suitable for filling Cum 279.87
023102 Using sand from other than River bed (This item is to be operated if Cum 1,787.78
suitable sand is not available in River Bed for filling
024000 RCC Box
024010 Providing and casting machine batched, machine mixed and machine Cum 2,852.12
vibrated Cement Concrete of specified grade as per approved
Design Mix, mixed in Mobile Concrete Batching/Mixing Plant at site or
RMC from approved plants, (Cast in-Situ/Pre-cast) in bottom/top slab,
side walls, toe wall and sumps haunch filling head walls, thrust bed or
any other component using 20mm graded crushed stone aggregate
and coarse sand of approved quality of RCC box of any size including
finishing, Plasticiser in approved proportions (as per IS:9103), to
modify workability without impairing strength and durability, complete
as per drawings and technical specifications as directed by Engineer
in charge.
Note:
16

024020 Providing and laying in position machine batched, machine mixed and Cum 2,592.84
machine vibrated Design Mix Cement Concrete, mixed in Mobile
Concrete Batching/Mixing Plant at site or RMC from approved plants,
of specified grade (cast in-situ) using 20mm graded crushed stone
aggregate and coarse sand of approved quality in Drop and curtain
wall and alike structures below bed level, complete in all respect as
per drawings and technical specifications to the satisfaction of
Engineer-in-Charge.
Note: Payment for cement, reinforcement and shuttering shall be
made extra.
024030 Launching of precast RCC box segments of any size and barrel length
for single/double line as per approved drawings to the correct
alignment and position in electrified / non-electrified sections
safeguarding all utilities ( S&T cable, power cable, OHE, pipelines
etc.) including transportation of box segments from casting yard to site
of launching, dismantling of the existing track, removing & stacking of
ballast, removing surcharge, dismantling of existing bridge built with
stone masonry / cement concrete including cutting of formation,
placing of Box segments in position either on base slab or prepared
foundation, backfilling after launching of precast box segment and
compaction of earth in surcharge, ballasting & re-laying of track to
correct alignment and geometry, packing and further maintenance till
allowing non-stop 20 KMPH over the re-laid track, complete in all
respect as per approved drawing to the satisfaction of Engineer-in-
charge. The rate is all inclusive except the cost of RCC Box
Segments, Base Slabs (if required) and backfill material which shall
either be supplied by railway or paid extra under relevant item.
Note: Unit of 'Each' here means bridge of span(s) with a total linear
waterway up to 3m.
024031 Single Line Each 816,197.43

Note: Minimum equipment required shall be (i) Crawler mounted
Hydraulic excavator of min 200 HP and bucket capacity 2.5 cum - 3
numbers (ii) Cranes minimum 150 T capacity - 3 nos., (iii) Stone
Breaker - 1 no., (iv) Road Trailer of 20 MT capacity - 1 no., (v)Tippers -
2 nos. and (vi) Tractors - 2 nos. (vii) Slope Vibratory compactor - 1 no.
and other required machineries etc. in good working condition at site
of work.
024032 Double Line Each 1,303,834.76

Note: Minimum equipment required shall be (i) Crawler mounted
Hydraulic excavator of min 200 HP and bucket capacity 2.5 cum - 3
numbers (ii) Cranes minimum 200 T capacity - 3 nos., (iii) Stone
Breaker - 1 no., (iv) Road Trailer of 20 MT capacity - 1 no., (v)Tippers -
2 nos. and (vi) Tractors - 2 nos. (vii) Slope Vibratory compactor - 2
nos. and other required machineries etc. in good working condition at
site of work.
025010 Deduct if Plasticiser has not been used in Design Mix Concrete of any
grade as per approved mix design or use of 40mm graded stone
aggregate in place of 20mm graded stone aggregate in any grade of
concrete.
Note: Deduction to be made for quantity of concrete.
17

025011 Deduction for not using Plasticiser in approved proportions (as per Cum -180.68
IS:9103) for any grade of Design Mix Concrete.
025012 Deduction for using 40mm graded stone aggregate in place of 20mm Cum -94.99
graded stone aggregate in any grade of concrete.
025020 Providing and applying two coats of coal tar or bitumen confirming to Sqm 165.03
IS:3117– latest version on the top and sides of RCC box/slabs @
1.70 kg/sqm after cleaning the surface with all labour and materials
complete job as directed by the Engineer.
025030 Centering and shuttering including strutting, propping etc. and removal
of form for :
025031 All types of bridge sub-structures, e.g. pier, abutment, wing wall, Sqm 600.77
retaining wall, RCC box type foundations, Abutment cap, Pier Cap,
Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm
wall etc. up to 5m above ground level
025032 All types of bridge super-structures, e.g. slabs, I-girders, T-girders, Sqm 781.21
Box girders etc. up to 5m above ground level.
025033 Extra for additional height over item no. 025031 & 025032 wherever Sqm 96.86
required with adequate bracing, propping etc. over initial height of 5
metres for every additional height of 1 metre or part thereof.
025040 Providing and laying in position machine batched, machine mixed and machine Cum 4,421.68
vibrated Cement Concrete of specified grade as per approved Design Mix
(mixed in Mobile Concrete Batching/Mixing Plant at site using 20mm graded
crushed stone aggregate and coarse sand of approved quality in jacketing of
piers and abutments from bottom of foundation up to a height of 10m for
designed thickness of jacketing including finishing, using Plasticiser in
approved proportions (as per IS:9103), to modify workability without impairing
strength and durability complete as per specifications and direction of the
Engineer in charge.
Note:
1. Payment for cement, reinforcement and shuttering shall be paid extra under
relevant item.
2. Plasticizer shall invariably be used in approved proportion to increase
workability with minimum possible quantity of cement for all grade of Design
Mix Concrete unless it is specifically approved citing reasons for not using
plasticisers at the stage of Mix Design and in that case deduction shall be
made as per relevant item.
025050 Extra over 025040 for drilling of holes and insertion of dowel bars in
case of Jacketing
025051 Extra for drilling 32mm dia. holes for jacketing / anchoring Metre 114.90
025052 Extra for inserting of dowel bars of specified dia. (cost of rods to be Metre 12.83
paid extra)
025060 Supplying, spreading and compacting well graded hard stone of 63mm Cum 1,329.27
average size (maximum up to 80mm size) in the bottom of foundation
of box culverts, bridges etc. including all lead, lift, ascent, descent etc.
complete job as per directions of Engineer In-charge.
025070 Supply and using Cement at Worksite

025071 Ordinary Portland Cement 43 grade approved brands/makes MT 6,609.41
18

025072 Ordinary Portland Cement 53 grade of approved brands/makes MT 6,689.69
025073 Pozzolana Portland Cement approved brands/makes MT 6,288.31
025074 Sulphate Resisting Cement approved brands/makes MT 8,696.59
025080 Supply of steel reinforcement of approved brands/makes for R.C.C.
work including straightening, cutting, bending, placing in position and
binding all complete.
025081 Mild steel bars Kg 66.10
025082 Thermo-Mechanically Treated bars of grade Fe-500D or more of Kg 99.95
approved brands/makes.
19
IR Unified Standard SOR -2021 Chapter -3: Bridge Works - Super Structure (RCC)
CHAPTER - 3 : Bridge Works - Super Structure (RCC)

stone aggregate and coarse sand of approved quality for cast in-situ
Prestressed (Post-tensioned) concrete girder / Box girders/Slabs for
different spans including finishing, using Plasticiser in approved
strength and durability complete as per drawings, specifications and
direction of the Engineer in-charge.
Note:
1. Payment for Staging, Shuttering, Cement, reinforcement, HTS
cables, sheathing, anchorage cones, stressing of cables and grouting
of the ducts shall be made extra under relevant items.
031011 With Soffit level up to 9m above Bed level Cum 2,699.92

031012 With Soffit level From 9m above Bed Level to12m above Bed Level Cum 2,807.00
031013 With Soffit level From 12m above Bed Level to 15m above Bed Level Cum 3,021.17
031014 Extra over USSOR Item no. 031013 for Soffit level beyond 15m above Cum 71.39
Bed Level for every 1m or part thereof
031020 Providing and launching in position machine batched, machine mixed Cum 2,592.84
and machine vibrated Cement Concrete of specified grade as per
stone aggregate and coarse sand of approved quality for the Precast
Prestressed (Post-tensioned) Concrete Girder/Box Girders/Slabs in
contactor’s casting yard in the vicinity of worksite, including finishing,
using Plasticiser in approved proportions (as per IS:9103), to modify
workability without impairing strength and durability, complete as per
drawings, specifications and direction of the Engineer.
Note:
1. Payment for Shuttering, Cement, Reinforcement, HTS cables,
Sheathing, Anchorage Cones, stressing of cables, grouting of the
ducts and launching of girder/slab in position shall be made extra
under relevant items. However, deduction shall be made in case of
slab as per relevant item.
2. For pre-cast item, loading in transport vehicle in casting yard is
included and shall not be paid extra.
20

031030 Providing and launching in position machine batched, machine mixed Cum 2,592.84
and machine vibrated Cement Concrete of specified grade as per
stone aggregate and coarse sand of approved quality for the Precast
Prestressed (Pre-tensioned) concrete girder/slab in contractor’s
casting yard, including finishing, using Plasticiser in approved
strength and durability, complete as per specifications and direction of
the Engineer.
Note:
1. Payment for Shuttering, Cement, Reinforcement, HTS cables
including stressing and launching of girder/slab in position shall be
made extra under relevant items. However, deduction shall be made in
case of slab as per relevant item.
2. For pre-cast item, loading in transport vehicle in casting yard is
included and shall not be paid extra.
031040 Providing, fabricating & fixing in position to exact design profiles, MT 170,489.32
H.T.S. cables of all classification made from Low Relaxation strands
conforming to IS:14268– latest version in Prestressed (Post-
tensioned) Concrete girders/slabs etc. including supplying, cutting,
making into cables with necessary spacers, colour coding, protecting
with water soluble oil at all time, anchoring of cables, supplying and
placing spiral corrugated type galvanized metal steel ducts sheathing
made up of Cold Rolled Cold Annealed (CRCA) mild steel conforming
to IS:513 of required diameter/ thickness, vent pipe, placing, bending,
routing, fixing, stressing & grouting of cable ducts with cement grout,
Anchorage sets in required number with provision for future
prestressing if any including all lead and lift with contractor’s own
materials, labour, equipments etc. complete as per drawings &
specifications. Rate also includes covering anchorage pads with epoxy
mortar of approved quality to avoid corrosion. Cement for grouting to
be paid separately. Payment shall be made in terms of weight of HTS
cables as per drawing.
031050 Providing, fabricating & fixing in position to exact design profiles, MT 110,537.21
H.T.S. cables of all classification made from Low Relaxation strands
conforming to IS:14268– latest version in Pretensioned Prestressed
Concrete girders/slabs etc. including supplying, cutting, making into
cables with necessary spacers, colour coding, protecting with water
soluble oil at all time, placing, bending, routing, fixing, stressing
including all lead and lift with contractor’s own materials, labour,
equipments etc. complete as per drawings & specifications. Payment
shall be made in terms of weight of HTS cables as per drawing.
031060 Extra for using HDPE sheathing in place of CRCA sheathing Metre 147.17
21

031070 Making suitable designed staging for cast in-situ PSC girders/slabs up Cum 2,202.96
to 10.5m height from bed level up to soffit of girder/slab with all
contractors materials, machinery, tools and plants, transportation
complete in all respects required for casting and removal of the same
after completing the work and restoring the site to original.
Note: The payment for staging shall be made on the cubical quantity
of concrete of main Girders/slabs.
031080 Supplying and laying in position specified grade precast prestressed Cum 2,592.84
cement concrete ballast retainers of size, as directed by Engineer In-
charge. Payment for Shuttering, Cement, reinforcement, HTS cables,
anchorage cones, stressing of cables and grouting of the ducts will be
done extra.
031090 Design, manufacturing, supplying and fixing in position elastomeric Cu Cm 1.20
bearing true to line and level conforming to IS:3400, IS:226, BS-5400
under prestressed concrete girders/ Steel Girders, for Pre-cast as well
as cast-in-situ girders as per approved drawing. The rate shall include
cost of load test of one no. bearing from Railway approved firms and
all fixing materials, equipments, machineries, labour, taxes, loading,
unloading, leading, lifting etc. complete. Rates include getting the
drawing approved from Railway and cost of inspection during
manufacturing from railway approved organization.
Note : 1. The rate is for finished item complete and paid only after
fixing in position below the girder. 2. The volume shall be as given in
the drawing and no deduction shall be made for inserted steel plates
etc.
031100 Providing and fixing in position of standard preformed sealed and slab
type or strip seal elastomeric type expansion joints for Railway bridge
or Road Over Bridges as per approved drawings and latest
MORTH/IRC specifications complete in all respect as directed by
Engineer in-charge.
031101 For 40mm expansion Metre 6,147.81
031110 Load testing of one or more spans of bridge as selected by the
Engineer as per approved load test procedure following relevant
IS/IRC/Railway codes with contractor’s labour, deflection measuring
instruments, loading materials, recording and analyzing the load
testing results including all lead & lift, etc. complete as required. The
rates are all inclusive and will be paid after load test is finished and
girder is cleared of the kentledges/loading material etc. The load shall
be 1.25 times the stipulated design load.
031111 For Span design load up to 100 MT Each 74,967.32

031112 Extra for every increase of 1 MT or part thereof over 100 MT in the MT 259.86
span design load capacity up to 800 MT
22

031120 Casting and installation of single/twin RCC box of all sizes with or Cum 3,949.45
without common web section including design of pushing scheme,
thrust bed, casting of all RCC components, with specified grade of
controlled concrete, pushing it in correct position and alignment below
Railway track/Road following all measures of track safety by “Box
pushing technique" as per approved drawings/scheme, with or without
surcharge in all types of soils with disposal of surplus earth away from
vent up to 1 Km, fixing arrangement for all services & utilities
including parapet walls on both sides, wearing course, foot paths,
plaques, drainage arrangements etc. and all other incidental works to
complete the ROB/RUB/Canal crossing in all respect as per
specifications to the satisfaction of Engineer-in-Charge.
Note:
1. The rate includes all items of work/supplies for complete job in all
respects except "cost of Reinforced cement concrete, cement,
reinforcement & shuttering" of (i) main RCC Box; (ii) Thrust Bed; (iii)
Footpath (iv) Parapet wall and (v) wearing Course only, which shall be
paid extra under relevant items of USSOR.
2. In case Drag Sheet and/or Rail Cluster are to be used as per
approved scheme and design, the same shall be paid extra under
relevant item.
3. The payment for this item shall be made for the clear inner cross
section area of the parent RCC Box/Boxes and barrel length i.e. clear
inner volume of parent RCC Box/Boxes.
031121 Extra for using GI Drag Sheet, 1.50 mm thick, for protection of track Cum 907.93
from subsidence while pushing the box as per design over item no.
031120.
Note: The payment for this item shall be made for the clear inner cross
23

031130 Casting and installation of single/twin RCC box of all sizes with or Cum 3,020.53
without common web section after supporting the track on temporary
girders including design of pushing scheme, thrust bed, casting of all
RCC components, with specified grade of controlled concrete, pushing
it in correct position and alignment below Railway track/Road following
all measures of track safety by “Air pushing technique" as per
approved drawings/scheme, in all types of soils with disposal of
surplus earth away from vent up to 1 Km, fixing arrangement for all
services & utilities including parapet walls on both sides, wearing
course, foot paths, plaques, drainage arrangements etc. and all other
incidental works to complete the ROB/RUB/Canal crossing in all
respect as per specifications to the satisfaction of Engineer-in-Charge.
Note:
(1) The rate includes all items of work/supplies for complete job in all
respects except "cost of Reinforced cement concrete, cement,
reinforcement & shuttering" of (i) main RCC Box; (ii) Thrust Bed; (iii)
Footpath (iv) Parapet wall and (v) wearing Course only, which shall be
paid extra under relevant items of USSOR.
(2) The CC Cribs as required and Temporary Girder shall be supplied
by Railways at available location.
(3) Transportation of Temporary Girder to site shall be paid separately
under relevant item..
(4) The payment for this item shall be made for the clear inner cross
031140 Fabrication, insertion and removal of rail cluster below the running MT 6,257.18
track to ensure safety of track during box pushing in correct position
and alignment with Railway rails and contractors MS flats, wooden
blocks, and 12 mm dia bolts etc., as per approved drawing including
removing and filling back of ballast below track under traffic conditions
of Electrified/Non-Electrified section with all contractors, labour, tools,
tackles, consumables plants, and 50MT capacity crane and any other
material required for execution of work in all respect with all lead and
lift, transportation and as directed by Engineer in-charge. Payment
quantity shall be as per the weight of rail in rail cluster used at site or
as per approved drawing, whichever is minimum.
24

031150 Launching of precast RCC box segments for RUBs/Limited Height
Subways (LHS) of any size and barrel length for single/double line as
per approved drawings to the correct alignment and position in
electrified / non-electrified sections safeguarding all utilities ( S&T
cable, power cable, OHE, pipelines etc.) including transportation of
box segments from casting yard to site of launching, dismantling of the
existing track, removing & stacking of ballast, cutting of formation and
approach road below or above bed level, placing of base slabs & Box
segments in position, backfilling after launching of precast box
segment, ballasting & re-laying of track to correct alignment and
geometry, packing and further maintenance till allowing non-stop 20
KMPH over the re-laid track, complete in all respect to the satisfaction
of Engineer-in-charge. The rate is all inclusive except the cost of RCC
Box Segments, Base Slabs and backfill material which shall either be
supplied by railway or paid extra under relevant item.
Note: Minimum equipment required during block shall be (i) Crawler
mounted Hydraulic excavator of min 200 HP and bucket capacity 2.5
cum - 3 numbers and (ii) 3 cranes of adequate boom length suitable
for launching box segments in position (min capacity of each crane -
200 MT for Single Line and 300 MT for Double Line) apart from other
equipments, tools, plants and machinery required to complete the job
within the allowed block period.
031151 For Single Line Each 1,221,889.46

031152 For Double Line Each 1,716,222.77
031160 Loading, transportation of Precast RCC Girders / Slabs / Ballast
retainers / Steel Girders etc. from Casting Yard to Site of Work,
unloading and stacking at site of work at prescribed location as
directed by Engineer-in-Charge up to 60 kms.
031161 Up to 5.00 Km MT 121.81
031162 Above 5 km up to 10 km MT 155.84
031170 Loading, transportation of Precast RCC Girders / Slabs / Ballast
retainers / Steel Girders etc. from Casting Yard to Site of Work,
unloading and stacking at site of work at prescribed location as
directed by Engineer-in-Charge above 60 kms.
031175 Above 200 km MT KM 5.05
25

031180 Providing Flood Level Gauges on abutments and piers, made by Sqm 491.18
20mm thick 1:4 cement plaster for a width of not less than 300mm,
duly engraving markings & figures in metres, divided into 10 parts
commencing from under-side of girders towards bed, painting
markings & figures with black enamel paint in three coats on white
background including painting HFL Mark in white by side of gauge with
year of occurrence with all Contractor's materials, labour, tools,
scaffolding and supports, lead & lifts, curing etc. complete as per
approved drawing and as directed by the Engineer in- charge
excluding cost of cement which shall be paid extra.
031190 Providing and fixing in position GI Drainage Spouts of required length

with Grating in RCC slab and filling bitumen along kerb as shown in
drawing with contractor's pipes, bitumen, tools, equipment, lead, lifts
etc. complete as per specifications and as directed by Engineer in-
charge.
031191 50mm dia. Drainage Spouts Metre 530.68
031192 100mm dia. Drainage Spouts Metre 1,141.99
031200 Applying Epoxy Poly-sulphate Paint three coats on existing bottom Sqm 322.04
surface of deck slab including cleaning surface of dirt, dust & other
foreign matter, sand papering, wire brushing as required with all
contractor’s materials tools, machinery, scaffolding, lead, lifts etc.
complete as per specifications and as directed by Engineer in-charge
031210 Supplying and laying 160mm dia. PVC Pipes Class-I, capable for a Metre 524.84
pressure of 2.5 kg/sqm in footpath of ROB for laying cable with all
contractor’s materials labour, tools, plant, machinery, vehicles,
consumables, lead, lift etc. complete as per specifications and as
directed by Engineer in-charge.
031220 Deduction in rate of 031010, 031020 and 031030 for casting of slab in Cum -35.69
place of Girder for any height
26
IR Unified Standard SOR -2021 Chapter -4: Bridge Works - Super Structure (Steel)
CHAPTER - 4 : Bridge Works - Super Structure (Steel)

041010 Supplying, fabrication, assembling of all types of steel girders of
specified spans with structural steel conforming to Quality "B0" Grade
Designation E250 conforming to IS:2062, erection / slewing / end
launching of steel girders with cranes or any other approved
launching methods as per site conditions (not requiring traffic block)
on sub-structure including provision of trolley refuges etc., complete
as per approved QAP and drawings conforming to IRS-B1-2001 and
other relevant codes and specifications.
Note:
1. Detailed fabrication and erection drawings & launching methodology
will be prepared by the contractor and got approved from Railway.
2. The rate is all inclusive including launching in position, complete in
all respect except cost of (i) Painting / Metalising; (ii) Bearings & (iii)
HSFG bolts which shall be paid extra under relevant item.
3. The payment shall be made on the theoretical weight of main
components and gusset plates only.
4. Payment Schedule:
(i) Receipt of material at site: 40%
(ii) Fabrication of girders: 20%
(iii) Erection/Launching: 20%
(iv) Completion in all respects: 20%
041011 Plate Girder/Semi Through Girder/Composite Girder (Steel Work) MT 130,814.56

041012 Open web Girder MT 147,495.79
041013 Extra for using steel conforming to Grade Designation E350 instead MT 3,612.43
of Grade Designation E250 of Quality "B0" as per IS: 2062
041014 Deduct for using steel conforming to Quality "BR" instead of Quality MT -3,077.26
"B0" of Grade designation E250 as per IS:2062.
041015 Extra for using steel conforming to Quality "C" Grade Designation MT 1,739.32
E250 instead of Quality "B0" Grade Designation E250 as per IS:
2062
041020 Supplying and fixing HSFG bolts of any dia and any length with Kg 150.57
suitable nuts including DTI washers conforming to IRS-B1-2001 for
bridges and steel structures with contractors labour, tools and plants
and lead and lift etc., complete.
041030 Assembling and erection of fabricated Steel girders on bearings at
site with crane/derrick / any other approved means at site on sub
structure with labour, equipment, T&P including site bolting with all
temporary arrangements, scaffolding etc. with contractors design and
scheme for longitudinal launching/side slewing (not requiring traffic
block) approved by Railway. Rate includes drifts, service bolts,
Holding down bolts etc. as per drawings.
Note: Payment for HSFG bolts used if any will be made separately
under relevant item.
041031 Plate Girder/Semi Through Girder /Composite Girder more than 12.2 MT 12,439.52
m span
041032 Open web Girder MT 18,727.15
27

041040 Metallizing of steel work of girders with sprayed aluminium after
surface preparation by Sand/grit blasting, followed by one coat of etch
primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two
coats of aluminium paint (IS:2339) with all labour, T&P and material as
a complete job duly conforming to all relevant specifications and
process given under Clause 39 of IRS-B1-2001.
Note: Nominal Thickness of sprayed Aluminium coating shall be 150
microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT
of each coat of Aluminium paint shall be 12-14 microns.
041041 On new girder during fabrication Sqm 616.95

041042 For maintenance work under running traffic Sqm 771.19
041050 Providing and fixing railing used in rows for footpath or anti-crash Kg 88.24
barrier railing with B class G.I. pipe 65/50 mm nominal dia including
cost of M.S. angle and channels in vertical posts, welding / bolting,
priming painting with one coat ready mix Zinc Chromate conforming to
IS:104 with DFT of 25-30Microns, followed by one coat of Zinc
Chrome red oxide conforming to IS:2074 with DFT of 25 Microns with
all material, labour, T&P as a complete job.
Note: Cost of painting shall be paid extra under relevant item.
041060 Supplying and fixing M.S. Angles 65mmx 65mmx 8mm or any other Kg 87.78
size conforming to IS:2062 in the nosing of steps of stair cases of Foot
Over Bridges including provision of 10mm dia, anchor bar 600mm c/c
and fixing with main girder with M.S. flat, making anti-slip
arrangements over the top of nosing as per approved scheme given
by Engineer in charge with all material, labour, T&P as a complete job.
041070 Providing and fixing various size HTS holding down bolts conforming
to relevant Codes/Specification in concrete column or in other
structures with proper nuts, bolts, washers/plates, grouting of holes
with cement or epoxy concrete with all material, labour, T&P as a
complete job.
041071 With Cement Grout. Cost of cement shall be paid extra. Kg 115.12
041072 With epoxy concrete grouting. Kg 122.81
041080 Supplying, Fabricating and fixing access ladders, inspection platforms, MT 87,841.30
Trolley refuges etc., on bridges with structural steel conforming to
IS:2062 including welding / bolting, priming painting with one coat of
ready mixed paint of Zinc Chromate (IS:104) with DFT of 25-30
microns followed by one coat of Zinc Chrome Red Oxide (IS:2074)
with DFT of 25 microns with all material, labour, T&P as a complete
job.
Note: Painting shall be paid separately under relevant item.
041090 Supplying, fitting and fixing in position true to line and level cast steel MT 566.09
rocker/roller bearing of different load bearing capacity conforming to IS
:7666, IS:9565, IS:1030, IS:919, IS:3073 and IRS Bridge Code
including all accessories as per drawing and Technical Specifications
with all material, labour, T&P as a complete job. The payment shall be
made for the load bearing capacity in Metric Tonne as per approved
drawing.
28

041100 Supplying, fitting and fixing in position true to line and level forged MT 840.68
steel roller bearing of different load bearing capacity conforming to IS
:7666, IS:9565, IS:1030, IS:919, IS:3073 and IRS Bridge Code
including all accessories as per drawing and Technical Specifications
with all material, labour, T&P as a complete job. The payment shall be
made for the load bearing capacity in Metric Tonne as per approved
drawing.
041110 Deleted
041120 Design, supply, fitting and fixing in position true to line and level POT-
PTFE bearing of 300MT Capacity, consisting of a metal piston
supported by a disc or un reinforced elastomer confined within a metal
cylinder, sealing rings, dust seals, PTFE surface sliding against
stainless steel mating surface, complete assembly to be of cast steel /
fabricated structural steel, metal and elastomer elements complete as
per IS:2062, IS:1030, AISI:304, AISI:316, IS:6911, BS:3784, IS:3400,
IS:226, BS-5400, Bridge Code and as per approved drawing and
Technical Specifications. The design of the bearings shall be
submitted by the manufacturers / contractor and got approved from
Railway before fixing. Test report after inspection of the bearings shall
be submitted and got approved before the materials are lifted from the
manufacturer premises.
041121 POT-cum -PTFE Bearing (Free end) Each 84,801.75

041122 POT Bearing-Fixed Type Each 119,144.34
041123 POT-cum -PTFE Guided (L)Bearing Each 143,899.93
041124 POT-cum -PTFE Guided (T)Bearing Each 137,902.09
PTFE bearing of 250 MT Capacity, consisting of a metal piston

29




30

041170 Design, supply and fixing 300MT capacity Spherical Bearing in
position true to line and level consisting of set of concave and
convex mating steel backing plate with a low friction sliding interface,
flat sliding elements ,guides and restraining rings; with all components
conforming to approved drawing and technical specifications & Bridge
Code including grouting of holes for anchor bolts and underside of
base plate with approved non-shrink epoxy grout with all material,
labour, T&P as a complete job.
Note: Sliding surface with PTFE or UHMWPE low friction
thermoplastic material and steel for backing plate of Mild steel in
accordance to IS:2062 grade-B. Cast steel in accordance with IS 1030
Grade 280-520W. Stain less steel in accordance with AISI
304/316.Low friction thermo -plastic sliding PTFE material either pure
polytetrafluroethalyne (PTFE) Or Ultra High Molecular weight
Polyethylene (UHMWPE). Austanitic steel is of stainless steel for the
sliding interface shall be in accordance with AISI 316L or O2 Cr17
NI12 of IS-6911. The thickness of the stain less steel sheet shall be
3mm minimum. The stainless steel sheet shall be attached to its
backing plate either by screwing/riveting or by continuous fillet weld.
Hard chromium plated surface shall be entire curved surface of the
convex steel plate mating with hard chromium plated concave sliding
surface .The thickness of the hard chromium plating shall be at least
100 microns and the final surface roughness of the plated surface
shall not exceed 3 microns. Bearing manufacturer shall give the
guarantee for satisfactory performance of bearing for period specified.
041171 Spherical Fixed Bearing Each 94,770.86

041172 Spherical Free Float Bearing Each 82,045.07
041173 Spherical Slide Guide (L) Bearing Each 117,595.12
041174 Spherical Slide Guide (T) Bearing Each 112,197.47
041180 Extra over items 041090 to 041170 for fixing bearings under running Each 10%
traffic /traffic block including removing of existing bearings and
handing over at location as directed.
041190 Supply & applying two coats of bitumen emulsion of Grade RS-1, Sqm 109.90
conforming to IS:8887 on the top surface of concrete deck slab (New
bridges) @ 1.70 kg/sqm after cleaning surface with all materials,
labour, tools and plants, equipment etc. complete.
041200 Providing road crane of specified lifting capacity with specified jib
length revolving type for material handling, assembly & erection of
girders/slab/RCC Box etc.
041201 12 MT capacity Day 8,268.45
041202 20 MT capacity Day 11,024.61
041203 50 MT capacity Day 27,561.52
041204 80 MT capacity Day 48,232.65
041205 100 MT capacity Day 68,903.79
041206 150 MT capacity Day 137,807.58
041207 200 MT capacity Day 241,163.26
041208 250 MT capacity Day 310,067.05
31

041209 300 MT capacity Day 344,518.95
041210 Extra for increase in road crane capacity over Item 041209 for every Day 1,337.94
additional 1 MT capacity or part there of
041220 Surface preparation of steel work of bridge plate/composite girders by
cleaning with scrappers and/or wire brushes to remove all rust and
loose or perished paint to prepare perfectly clean & dry bare metal
surface free from all dirt/foreign material & ready for initial coat of paint
for new or existing steel girders. Rate includes cost of labour,
consumables, brushes, tools & plants, ladders, scaffoldings, jhoola,
hanging scaffolding staging etc.
041221 Existing girders with old paints Sqm 45.03

041222 New girders during fabrication Sqm 36.03
041230 Surface preparation of steel work of bridge triangulated girders by
cleaning with scrappers and/or wire brushes to remove all rust and
loose or perished paint to prepare perfectly clean & dry bare metal
surface free from all dirt/foreign material & ready for initial coat of
paint. Rate includes cost of labour, consumables, brushes, misc. tools
and plants, ladders, scaffoldings, jhoola, hanging scaffolding, staging
etc.
041231 Existing girders with old paints Sqm 67.55

041232 New girders during fabrication Sqm 54.04
041240 Surface preparation for painting of bridge plate/composite girders and Sqm 22.17
other steel structures where the finishing coat shows signs of
deterioration; but primer coat of paint is sufficiently in good condition
and there are no signs of rusting etc. Surface shall be cleaned free
from oil grease, scaling and other foreign matters without disturbing
the primer coat {Rate includes cost of labour, consumables, tools &
plants, scaffolding, jhoola, ladder etc.}
041250 Surface preparation for painting of bridge Triangulated girders where Sqm 33.25
the finishing coat shows signs of deterioration; but primer coat of paint
is sufficiently in good condition and there are no signs of rusting etc.
Surface shall be cleaned free from oil grease, scaling and other
foreign matters without disturbing the primer coat.
041260 Painting of cleaned plate/composite bridge girders including all

scaffolding along with provision of Jhoola / hanging scaffolding
ladders etc. where required.
041261 With one coat ready mix Zinc Chromate conforming to IS:104 with Sqm 77.24
DFT of 25-30 Microns followed by one coat of Zinc Chromate red
oxide conforming to IS:2074 DFT of 25 Microns
041262 With two cover coats of ready-mixed paint conforming to IS:13607 with Sqm 100.59
colour/shades, as decided by Engineer-in charge
Note: DFT of each coat shall be 20-25 microns
041263 With two coats of Aluminium paint in dual containers conforming to Sqm 84.38
IS:2339 with DFT of 15 - 20 Microns for each coat.
041264 With two coats of epoxy paint conforming to RDSO spec Sqm 189.83
M&C/PCN/123-11
Note: DFT of each coat shall be 60 microns.
041265 With one coat Aluminium paint in dual containers conforming to Sqm 48.52
IS:2339 with DFT of 15 - 20 Microns .
041270 Painting cleaned triangulated bridge girders including all scaffolding,
along with provision of Jhoola / hanging scaffolding ladder where
required.
32

041271 With one coat ready mix Zinc Chromate conforming to IS:104 with Sqm 93.22
DFT of 25-30 Microns followed by one coat of Zinc Chrome red oxide
conforming to IS:2074 with DFT of 25 Microns.
041272 With two cover coats of ready-mixed paint conforming to IS:13607 with Sqm 116.56
colour/shades, as decided by Engineer-in charge.
Note: DFT of each coat shall be 20-25 microns.
041273 With two coats Aluminium paint in dual containers conforming to Sqm 100.36
IS:2339 with DFT of 15 - 20 Microns for each coat.
041274 With two coats of epoxy paint conforming to RDSO spec Sqm 205.81
M&C/PCN/123-11
Note: DFT of each coat shall be 60 microns.
041280 Extra for working under traffic conditions over items 041220 to 041274 Sqm 10%
041290 Removing of existing bed plate from existing bed block, supply,
fabrication and erection of new bed plate of approved sizes in exact
position over bed block of pier/abutments by giving full and even
bearing, setting them on the layer of free flow non-shrinkable grouting
compound, scrapping or chipping of bed block, if required, fabrication
and fixing of holding down HTS bolts of suitable sizes along with nuts,
washers etc., drilling holes of required size, grouting of holes by epoxy
mortar after fixing holding down bolts. Total work to be done during
traffic block. Cost of holding down HTS bolts shall be paid extra under
relevant item for supply of HTS holding down bolts.
041291 Up to 12.2m clear span Kg 237.95

041292 More than 12.2m and up to 18.3m clear span Kg 249.85
041293 More than 18.3m and up to 30.5m clear span Kg 261.74
041294 Supply of HTS holding down bolts with nuts, washer etc. Kg 100.35
041300 Assembling and erecting pre-fabricated structures, such as columns, MT 7,452.71
beams, girders, other members of FOBs and sheds; including leading
all structural elements within 1 Km lead, bolting, riveting or welding as
per approved drawing or as directed by Engineer In-charge. Rate shall
include cost of labour, materials, tools & plants and only pre-fabricated
structural elements shall be given by Railway. (Work not requiring
traffic or power block).
041301 Extra over item no 041300, if the work is to be executed under traffic MT 225.21
or power block.
041310 Cleaning and greasing of free end and fixed end of steel girder Bridge
bearings with Grease Graphite, Kerosene oil and other materials as
per Para 222 of Indian Railway Bridge Manual 1998 with painting of
Bearing as per requirement complete as directed by engineer in-
charge.
Note: One unit shall consists of all bearing of one girder.
041311 Girder of clear span up to 12.2m Each 7,561.90
041312 Girder of clear span above 12.20m & up to 24.40m Each 9,058.05
041313 Girder of clear span above 24.40m & up to 30.5m Each 14,916.06
041314 Girder of clear span above 30.5m Each 19,786.10
041320 Launching in position, by any approved method, pre-fabricated Steel
Girders, precast PSC girders/slabs, casted at casting bed developed
at site, to correct alignment and level over the bed block / pedestal
with all required arrangements, complete in all respect.
33

041321 PSC girders / slabs MT 1,464.47
041322 Structural steel plate girders MT 1,401.77
041330 Delaunching of all types of Steel girders, PSC girders/Slabs and
stacking away from river stream or passage as directed by Engineer in
charge with all labour, tools and plant, equipment etc., complete.
041331 PSC girders / slabs MT 1,112.27

041332 Structural steel plate girders. MT 1,075.81
041340 Delaunching of existing and Launching & fixing of new girder/slab in
exact location of all type of steel/PSC girders/Slabs available at site,
during block, complete job including lifting to any height as per site
requirement, provision of approaches, and placing of released material
away from bridge stream or roads as the case may be.
Note: Payment under this item shall be made for the total weight of
girder removed and newly launched girder.
041341 Delaunching of existing PSC girders / slabs and Launching New PSC MT 1,030.69
girders / slabs
041342 Delaunching of existing PSC girders / slabs and Launching New MT 1,005.62
Structural steel plate girders.
041343 Delaunching of existing Structural steel plate girders / slabs and MT 991.03
Launching New Structural steel plate girders
041344 Delaunching of existing Structural steel plate girders / slabs and MT 1,016.11
Launching New PSC girders / slabs
041350 Longitudinally slewing of steel plate girders of span 12.2m to 24.4m
under traffic block at locations where it is found short / excessive
expansion gap beyond the bearing to locking strip or the center of the
bearing stiffener not in line with the center of the bed plate or where
the girders ends are butting each other as directed by the Engineer in
charge at site using contractor's own hydraulic jacks of 100 tons
capacity for lifting and slewing of girder separately on both ends to
suit as per site conditions, consumables and wooden cut blocks
including transportation, with all contractors labour, materials,
scaffolding/staging arrangements etc complete without damaging the
girder and track alignment and cross levels.
041351 For Span 12.2M to 18.3M Each 23,308.36

041352 For Span above 18.3 M to 24.4 M Each 25,639.19
34

041360 Arresting leakage of oil from oil bath tank of rocker and roller bearings Each 17,992.59
where in segmental rollers immersed in the oil of nominated OWG bridges of
all types of spans under traffic conditions with contractor's labour, materials,
tools and plants, Machinery like drilling machines and generators,
consumables (Engine oil, SAE oil, K-oil, oxygen and acetylene gas etc),
including transportation etc. complete, by draining left over residue oil
inside of the tank and opening of oil bath tank sides and top dust cover plates
and drain pipes completely by dismantling all its bolted joint connections
using chisels and drilling out bolts if any found sheared and strucked off in
the base plate, cleaning of bearings, rollers, base plates by applying kerosene
oil and scrapping, wire brushing and polishing by zero grade sand paper,
examining the rollers and base plates for any micro cracks with magnifying
glasses without causing any damage to rollers and its accessories, refixing
the oil bath tank side and top dust cover plates, drain pipes and its all joint
connections with new bolts using cork sheet and 2mm thick rubber sheet in
between joint connections all along its full length as oil sealant duly correct
punching of holes as per site conditions, applying of epoxy grout over the joint
connections to required thick and allowed to set, test checking for leakages if
any by filling the oil bath tank with water during passage of several trains and
after ensuring the pool proof leakage, the Railways supplied oil servo mesh
SP 460 BP or equivalent lubricant to be filled up in the oil bath tank and all
bolts to be tightened firmly and undulations or uneven surfaces of the pier cap
to be made level with cement concrete as directed by the Engineer in charge
at site .
Note:
1)Oil removed from the bearings should be filled in tins and handed over to
SSE/BR concerned,
2)After opening, removal of all existing plates and oil, bearings should be
inspected by Engineer in charge for its confirmation of cut blocks and cleaning
in all respects
3)Empty tins are to be handed over to SSE/BR/ concerned.
041370 Supplying fabricating and erecting welded and/or bolted and/or riveted MT 93,412.10
steel work in built up sections, trusses and framed work, staging,
racks, Height Gauge etc. for Steel Structures other than bridge
girders, using RSJ, tees, angles and channels/flats, plates, gussets,
round or square bars, cleats, bolts etc., with contractors own steel
including cutting, bending, straightening, drilling, riveting, hoisting,
fixing, erecting, welding, bolting etc., with Providing stiffeners wherever
required as per approved drawing including applying a priming coat of
a approved steel primer with all contractor’s materials, labour, tools &
plants, lead & lift including crossing of tracks if required etc., complete
as per specification and as directed by Engineer-in-charge.
Note: The payment shall be made on the theoretical weight of main
components and gusset plates only.
35
IR Unified Standard Schedule of Rates -2021 Chapter -5: Bridge Works - Misc.
CHAPTER - 5 : Bridge Works - Misc.

051010 Providing and laying boulders apron on river bed for protection against Cum 1,621.09
scour with stone boulders weighing not less than 35 kg each with
voids filled with spalls complete as per drawing and Technical
Specification.
051020 Laying of boulder apron laid in wire crates of approved size including Cum 566.11
overlaps at joints, laid with stone boulders, all loose ends to be tied
with 4mm galvanised steel wire. Payment for boulders & wire crates to
be done extra.
051030 Supplying of stone boulders weighing not less than 35 kg each at Cum 1,003.45
specified bridge locations.
051040 Manufacture and supplying Galvanized Wire Net Trungers made from Sqm 382.23
4mm galvanised steel wire @ 32 kg/10sqm having minimum tensile
strength of 300 Mpa conforming to IS:280 and galvanizing coating
conforming to IS:4826, woven into mesh with double twist, mesh size
not exceeding 100mm x 100mm.
051050 Providing and laying of Apron with cement concrete blocks cast in-situ Cum 2,461.44
and made with nominal mix of 1:2:4 with all material , labour, tools
and plants.
Note: (1) Payment to be made for concrete only; (2) Cement and
shuttering to be paid extra.
051060 Providing and laying Pitching with Stone Boulders, weighing not less Cum 1,523.35
than 35kg each with voids filled with spalls on slopes, laid over
prepared filter media including boulder apron laid dry in front of toe of
embankment complete as per drawing and Technical Specifications
(filter media to be paid separately under the relevant item).
051070 Providing and laying Pitching with Stone Boulders, weighing not less Cum 2,482.78
than 35kg each with voids filled with cement sand mortar 1:4 on slopes
laid over prepared filter media including boulder apron laid dry in front
of toe of embankment complete as per drawing and Technical
Specifications (filter media to be paid separately under the relevant
item). Rate is excluding cost of cement which shall be paid extra under
relevant item.
051080 Providing and laying Filter Material as per RDSO Specifications Cum 2,756.95
underneath pitching in slopes complete as per drawing and Technical
Specification.
051090 Laying Boulder Apron on river bed for protection against scour with Cum 373.90
stone boulders supplied by Railway with voids filled with spalls
complete as per drawings and Technical Specifications.
051100 Laying Pitching with Stone Boulders supplied by Railway with voids Cum 400.82
filled with spalls on slopes, laid over prepared filter media including
boulder apron laid dry in front of toe of embankment as per drawings
and technical specifications.
Note: Filter media to be paid under relevant item.
051110 Stenciling of Girders with black / blue lettering over yellow background Each 38.95
with ready mix paint w.r.t. details of executed inspection, greasing and
painting, other details as directed by Engineer in-charge
Note: Payment will be per cm height of each letter
36

051120 Cleaning Surface of Abutment and Piers up to bed level under water Sqm 111.00
with brush or any other tools to remove all traces of moss, loose
materials, fungus, algae, vegetation growth etc. Cleaning shall be
carried out with contractor's trained staff, tools & plants, safety
equipments etc. complete job including arranging safe approach.
052000 Flooring in Bridges

052010 Providing and laying flooring with rubble stone, laid over 15cm thick Cum 2,381.41
CC 1:2:4 and the voids filled with CC 1:2:4 complete with the joints
pointed with 1:2 Cement Sand mortar as per drawing and Technical
specifications. Payment for cement to be done separately. Voids in the
rubble stone to be taken as 35% of the gross volume of the stone
layer.
Note: Base concrete shall be paid extra under relevant item.
052020 Providing and laying 300mm thick (average) Dry Stone flooring with Cum 1,933.07
boulders of not less than 35kg each in weight, hand packed with
surface levelled off to the correct section with hammer dressing as
necessary on the ground including filling the gaps with quarry spalls
and ordinary sand complete including cost of supply of all materials,
labour, lead, lift, tools, plants, crossing of tracks and the like as per
drawing and technical specification as directed by Engineer in charge.
052030 Supply and laying of quarry dust including consolidation, supply of all Cum 1,019.20
materials, labour, lead, lift, tools, plants, crossing of tracks as per
drawing and technical specification as directed by the Engineer in
charge in case loose slush is encountered at site of foundation before
casting the foundation or laying the filtering media.
052040 Supply and laying of coarse sand including consolidation with all Cum 1,983.85
labour, lead, lift, tools, plants, crossing of tracks as per drawing and
technical specification as directed by the Engineer in charge in case
loose slush is encountered at site of foundation before casting the
foundation or laying the filtering media.
052050 Guniting concrete surface with cement mortar of average thickness Sqm 567.79
25mm along with wire mesh 50x50x3mm, applied with compressor
after cleaning surface and spraying complete including curing as per
procedure and technical specifications given under Para 209.3 of
IRBM. Rate is excluding the cost of cement which shall be paid extra.
052060 Providing and inserting nipples of size 12 to 20 mm dia. with approved Each 61.02
fixing compound after drilling holes for grouting as per Technical
Specifications including subsequent cutting/removal and sealing of the
hole as necessary after completion of grouting.
052070 Grouting of masonry/concrete by injection process duly Sealing of
cracks, through nipples complete as per Technical Specification and
procedure given in IRBM Para No 209 including necessary admixture.
Payment shall be as per use of cement by weight in case of neat
cement/cement mortar grouting and weight of Epoxy in case of Epoxy
Grouting. (Cement will be paid extra).
052071 Neat Cement Grout with 20% anti shrinkage compound w.r.t. cement. Kg 296.57
052072 Cement Sand Mortar (1:1) Grout with 20% anti-shrinkage compound Kg 111.15
w.r.t. cement.
37

052073 Epoxy Grout Kg 1,232.05
052080 Applying epoxy mortar over leached, honey combed and spalled Sqm 940.23
concrete surface and exposed steel reinforcement complete as per
Technical Specification with average thickness of 10mm including
priming coat, mortar plaster and seal coat of epoxy.
052090 Applying shotcrete mixture of average thickness 40mm over masonry / Sqm 630.68
concrete including removal of defective concrete, raking the mortar in
joints, cleaning the surface thoroughly, fixing 50x50x3mm wire mesh
over the surface for application of grout mixture comprising cement,
sand, coarse aggregate, water, quick setting compound complete as
per procedures and specifications given in IRBM Para No 209(3)
including curing. Rate is excluding the cost of cement which shall be
paid extra.
052100 Applying pre-packed cement based polymer mortar of strength 45 Mpa Sqm 463.93
(28 days) for replacement of spalled concrete with average thickness
of 10mm as per manufacturer's specification and approved procedure.
052110 Providing & applying epoxy with pot life not less than 60-90 minutes Sqm 795.20
for bonding of new concrete with old concrete @ 0.80 kg/sqm and as
per specifications including cleaning the surfaces complete as per
approved procedure.
052120 Providing & fixing 12 mm rabbit wire mesh at the junction of RCC Sqm 130.61
where specifically ordered or as shown in the drawing
052130 Providing weep holes by making suitable opening or drilling in existing Metre 401.40
Brick Masonry / Plain / Reinforced Concrete abutment, wing
wall/return wall with 110 mm dia UPVC pipe (working pressure
4kg/sqcm) extending through the full width of the structure complete
and repairing the same with cement mortar 1:2 (1 cement : 2 coarse
sand). Rate is excluding the cost of cement which shall be paid extra.
052140 Providing and fixing of Drainage Spouts of 110mm UPVC Type A ISI Metre 337.09
marked (Working pressure 4 kg/sqcm) using suitable clamps and
adhesive etc., complete.
052150 Providing and laying of filter media consisting of granular materials of Cum 2,351.27
GW, GP, SW groups as per IS:1498 (latest) in required profile behind
boulder filling of abutments, wing walls / return walls etc. above bed
level with all labour and material complete job as per drawing and
technical specification of RDSO Guidelines.
052160 Removing all loose concrete, cleaning rust with dusting compound &
water jet, drying, replacing worn out reinforcements by welding new
reinforcement for making up lost steel section, applying approved anti-
corrosive polymer coating over the damaged area to proper profile,
providing polymer mortar (up to 20mm thickness) or polymer concrete
(more than 20mm thickness) consisting of cement, sand, 6mm down
chips where required and polymer as per manufacturers' specification.
The rate includes curing for 14 days, all materials, consumables,
labours, tools and plants, scaffolding/staging with all lead and lift.
Note: Cost of reinforcement, if used, to be paid separately.
052161 20mm thick polymer mortar Sqm 1,296.69

052162 20mm - 50mm thick polymer concrete Sqm 1,292.47
38

052170 Supply, fabrication and erection of steel members to replace existing MT 152,729.00
corroded members of built up section made up of MS plate, angles,
channels of different thickness and sizes including painting with one
coat of ready mix paint Zinc Chromate priming to IS:104 followed by
one coat of ready mix paint red-oxide Zinc Chrome priming paint to
IS:2074. Structural steel should conform to IS:2062 E250- Grade'B0'.
Fabrication and erection to be as per existing design initially by bolts
and nuts and finally by rivetting during the sanctioned traffic block.
Rate includes cutting of new steel work, removal of rivets by drilling,
dismantling of any existing members required for inserting fabricated
members, fixing of new fabricated built up members with all tools,
plants, labour, consumables, machinery and accessories etc. Work
will be executed as per IRS:B 1-2001.
Note: Painting shall be paid extra under relevant item.
052180 Supplying and changing of corroded worn-out and loose rivets of any
size at any location of the bridges with or without traffic blocks
including all tools, plants, machinery complete in all respects.
052181 For Rivets of size up to 25mm dia. Each 208.50

052182 For Rivets of size more than 25mm dia. Each 347.63
052200 Painting the HFL mark and Danger level mark, year of HFL on bridge Each 255.68
abutments and piers with ready mixed paint as per standard in two
coats over one coat of primer with all materials, labour, tools,
scaffolding, all lead and lift etc. including writing complete.
052210 Providing cast in situ bridge number plaques as per Railway drawing Each 739.88
in cement concrete 1:2:4 mix using 20mm hard stone aggregate
embedded in 30mm notch in Bridge parapet coping duly engraving the
letter and figures and an arrow indicating the direction of flow and
finishing the top exposed surface with cement mortar 1:3, painting
letters and figures with two coats of black enamel paint on two coats of
white background with all labour, tools, cement, paint etc. with all
leads and lifts.
052220 Providing cast in-situ plaques for bridge foundations details of size Each 1,142.87
45cmx45cmx5cm in cement concrete 1:2:4 mix using 20mm hard
stone aggregate embedded in 30mm deep notch over abutment &
piers, engraving the letters & figures with CM 1:3 and finished smooth
including painting letters and figures with 2 coats of black enamel and
plaque with white enamel with all labour, tools, cement, paint, curing
etc. as a complete job.
052230 Providing & laying non pressure NP-4 Class RCC pipe with collars,
jointing with 1:2 cement and ordinary sand mortar including testing of
joints, but excluding earthwork with all labour and material as a
complete job. Cement for mortar will be paid separately.(Pipes of
600mm dia and above will be laid using crane/hydra).
052231 300mm dia. Metre 927.94

052232 450mm dia. Metre 1,458.26
052233 600mm dia. Metre 2,469.58
052234 900mm dia. Metre 4,728.47
052235 1000mm dia. Metre 6,040.39
39

052236 1200mm dia. Metre 8,059.15
052237 1800mm dia. Metre 19,111.88
052240 Supplying, spreading and filling coarse sand (no cohesive materials to Cum 2,107.58
be used) of approved quality including watering and ramming in
foundation, behind the abutment, wing wall, retaining wall in layers not
exceeding 150mm thick including its compaction as per direction of
Engineer-in-charge. The rate includes all lead, lift, ascent, descent,
crossing of Railway line etc. complete with contractor’s labour,
materials, tools and plant.
052250 Providing Boulder Backing behind wing wall, return wall, retaining wall Cum 329.65
with hand packed boulders & cobbles with smaller size boulders
toward the back including all lead, lift, labour & other incidental
charges as complete work in all respect. Payment for boulder/cobbles
will be done extra.
052260 Dewatering of natural or accumulated water from any location. HP Hour 40.58
Payment to be done for Horse power of pump multiplied by pumping
hours.
052270 Supplying & fixing Galvanised Steel Wire Rope net, made of 9mm dia. Sqm 1,153.38
steel wire rope having aperture size of 45cm x 60cm with 6m long
hangs for top anchoring and 5m wide along with chain-link mesh-
netting of 80mm x 80mm mesh size made from 2.4mm dia galvanised
wire, joining of chain-link mesh & steel wire rope net and joining of
adjacent nets with galvanised spiral lock springs of steel wire dia
2.2mm; inner dia. of springs 18mm; total length 50mm ± 0.5mm; pitch
4mm & open end length 60mm including cutting of tree/shrub etc. in
rope-netting location and also, excavation / filling-back of trenches in
all types of soil after anchoring rope net with RCC pre-cast beam of
size 15cm x 15cm x 2m of M-15 concrete & 30cm thick M-10 PCC.
This work also includes supply of 200mm x 200mm x 6mm epoxy
coated washer plates with 12.5mm / 18mm dia. hole at centre and
supplying & fixing of anchor bolts/fasteners of 10mm dia. including
drilling of holes up to a depth of 110mm in rock; cleaning of holes;
fixing of fasteners with nut & epoxy coated washer plates; applying
torque 65 to 70 N/mm for fixing of rope net for intermediate anchoring
on the surface of cutting, bottom anchoring up to 1m depth by using
16mm dia. HYSD steel bolts, threaded up to 200mm on top and fixing
epoxy coated washer plate, fabrication & fixing of U-pin on top of
cutting for top anchoring and joining of adjacent nets with spiral spring
and fixing at the ratio of 1 no. per 0.6m in longitudinal direction of net
portion and additional locks for lacing chain link netting with rope net
with contractor's materials, machinery, tools & plants, cement, steel,
labour, lead, lift, transportation, ascent, descent, taxes, royalty etc.
complete as per directions of engineer-in-charge.
Note: Concrete will be paid separately under relevant item.
40

052280 Supplying & placing of Mechanically Woven Double Twisted Cum 3,158.98
Hexagonal Shaped Wire Mesh Gabion Boxes of required sizes, Mesh
Type 10cm x 12cm, Zn and PVC coated Mesh Wire dia. 2.7/3.7mm
(ID/OD), edges of meshes mechanically edged / selvedged with heavy
coating of galvanization as per EN 10223-3/ASTM A 975 with
partitions at every 1m interval and properly packed with approx.
150mm size boulders including transportation and placing at indicated
places as per direction of engineer-in-charge including contractor's
tools, plants, labour, royalty charges etc. complete in all respect and
stitching with lacing wire of dia. 2.2/3.2mm (ID/OD) @ 5% by weight of
Gabion boxes, carrying the material by head load from nearest
approach with all safety precautions and all leads and lifts.
052290 Supplying & placing partly or fully underwater of Polypropylene Tarred Cum 3,028.50
Rope Gabion, fabricated from 9mm dia. rope, 100mm x 100mm Mesh
with partitions at every 1m interval and properly packed with
approximately 150mm size boulders including transportation and
placing at indicated places as per direction of engineer-in-charge with
contractor's tools, plants, labour etc. including royalty charges
complete in all respect and stitching with polypropylene lacing rope of
minimum dia. 4mm; carrying the material by head load from nearest
approach with all safety precautions and all leads and lifts.
053010 Designing and developing Detailed structural and working Drawings
for following items for ROB/RUB/Bridge based on Railway's approved
GADs, duly collecting necessary data from Railways and R&B
authorities, duly designing members and submission of check plot duly
getting proof-checked by Railway approved institutes, submitting for
Railway's verification and approval, making corrections duly
incorporating suggestions in drawings/designs, further submission of
original in transparent film paper and soft copy (CD) for Railways
approval etc. with contractor's technical expertise and instruments,
labour, consumables, repeatedly attending till final approval etc.,
complete as directed by Engineer in-charge.
053011 Open / Pile / Well Foundation for piers/abutments Set 24,417.36

053012 RCC Bed Block Set 7,592.80
053013 Foundation and sub-structure for RCC retaining wall, abutment and Set 23,748.39
approach slab
053020 Extra for providing and mixing synthetic Polyester triangular synthetic Kg 535.18
fibre in specified ratio (@ 0.25% of cement by weight), 6 to 18mm in
length, designed for melting point 240°C to 260°C and specific gravity
of 1.33 to 1.40 in all types of work CC/RCC/plaster etc., This item
shall only be used on specific instructions of Engineer-in-Charge.
41
IR Unified Standard SOR -2021 Chapter -6:Rails, Sleepers and Fittings Renewal
CHAPTER 6 : Rails, Sleepers and Fittings Renewal

061000 Rails
061010 Pulling & positioning of rails accurately on cess including supporting
rails, providing required gap and squaring at ends for renewal
preparation, as directed by Engineer in-charge.
061011 Up to 40 m long rail panel RM 7.78
061012 More than 40 m long rail panel RM 12.29
061013 Extra to Item no. 061011 for working on bridge RM 3.39
061014 Extra to Item no. 061012 for working on bridge RM 5.65
061020 Dismantling and removing rail of all section & length from track, laid on
any type & density of sleeper by removing fish plates, fastenings & fish
bolts and other materials including stacking all released materials
within an average distance of 500 metres as directed by Engineer in-
charge.
Note:
1.Cutting of rails shall be paid separately.
2.Work to be done under traffic block.
061021 For Through Rail Renewal work TRM 38.18
061022 For Casual/Scattered Rail Renewal work RM 30.32
061030 Insertion of rails of all types & length in track, laid on any type &
density of sleeper to the specified gauge under traffic block. Rates
include fastening of rail with sleepers with standard set of fastenings
and fixing of fish plates and bolts or, if required, providing gap for
welding and stacking of released material without infringement within
250m as directed by Engineer-in-Charge.
Note: Rail drilling and cutting to be paid separately.
061031 For Through Rail Renewal work TRM 39.36

061032 For Casual/Scattered Rail Renewal work RM 32.09
062000 Sleepers
062010 Through Sleeper Renewal (TSR) with PSC sleepers involving removal
existing sleepers of any type along with fittings from track, insertion of
PSC sleepers lying along the cess / formation / slope / toe within 5
metres height with all fittings to specified spacing, gauge and
squareness, one round of through packing to make track fit for 20
kmph speed, dressing of ballast to standard profile, all in accordance
with the latest provisions of IRPWM and stacking of all released
material neatly at specified places within an average lead of 100 m as
062011 For location of work not involving deep screening Each 289.38
062012 For location of work involving deep screening (deep screening to be Each 161.29
paid separately).
062013 For PSC wider base sleepers - For location of work not involving deep Each 303.85
screening
062014 For PSC wider base sleepers - For location of work involving deep Each 169.35
screening. (deep screening to be paid separately)
062015 Extra to item no. 062011, 062012, 062013 and 062014 for sleepers Each 35.08
lying on slope / toe of bank beyond initial height of 5 metres.
42

062020 Re-spacing of existing PSC sleepers for Increasing Sleeper Density
(ISD) work in track after marking of sleeper spacing as per required
sleeper density, including fixing all fastenings and initial packing and
all associated work required to complete the work, as directed.
Note: Insertion of new sleeper will be paid extra under relevant item.
062021 For location of work not involving deep screening TRM 140.95
062022 For location of work involving deep screening (deep screening to be TRM 50.85
paid separately).
062030 Replacement of any type of sleepers in track with PSC sleepers lying
on cess or at Bridge Approaches for casual renewal at isolated
locations with all fittings complete to specified gauge & cross level with
contractor’s tools including packing and dressing of ballast, as directed
by Engineer in-charge. Released materials shall be neatly stacked and
handed over at specified location within an average lead of 250 m or
near either side of Bridge approaches as directed.
062031 Locations other than Ballasted Deck Bridge Each 402.35

062032 Ballasted Deck Bridge Each 475.10
063000 Fittings/Lubrication Works
063010 Fixing of fish plates with fish bolts on a joint of all rail sections duly
lubricating fish plates/bolts with contractor's grease graphite in running
track condition including transportation of fish plates and fish bolts
from nearest station / store / level crossing.
Note: Rail cutting & drilling to be paid separately.
063011 Fish plates with 4 fish bolts. Joint 187.28
063012 Fish plates of 6 bolts. Joint 273.57
063020 Through renewal of Metal / GFN liners in running track condition after Sleeper 24.21
cleaning of rail foot at liner seat, greasing of liner, liner seat and
sealing of liner contact area at rail foot including removing, cleaning &
lubrication of ER Clip & Insert Eye and re-driving the same with
contractor's grease graphite of approved quality with all lead & lift.
063030 Through Fitting Renewal (TFR) on PSC track, comprising of renewal Sleeper 30.22
of Grooved Rubber Pads, Liners and ERCs without damaging PSC
sleepers. Scope includes removal of all fittings, cleaning of rail seat,
rail flange at liner seats, and eye of Inserts with wire brushes and
applying Grease Graphite Grade "O" (IS:408) to eye of insert and
central leg of ERC with contractor's grease of Railway’s specification,
fixing all fittings in correct position and sealing liner edges with grease
all complete including collection and stacking of released materials at
nominated locations within SSE Jurisdiction as directed by Engineer-in-
Charge.
Note: All the fittings will be supplied at SSE/Stores/Depot.
43

063040 Through replacement of Grooved Rubber Sole pads(GRSP) on PSC Sleeper 28.10
sleepers duly removing the ERCs and liners and replacing the GRSP
by just lifting the rail after cleaning the rail seat, refixing the liner and
ERC after greasing of ERCs, liners and Liner contact area including
sealing with Contractor's Grease Graphite Grade 'O' (IS:408) duly
cleaning of rust/scale of ERC, Metal /GFN liners & SGCI insert by
using wire brush, scrapper/sand emery paper etc., with all contractor’s
labour, tools, plants including collection and stacking of released
materials at nominated locations within SSE Jurisdiction and as
directed by Engineer-in-Charge.
Note: GRSP will be supplied at SSE/stores/depot.
063050 Lubrication of fish plated rail joints under traffic, by using Grease
Graphite Grade 'O' (IS:408) and Black oil supplied by contractor, for all
types of rail sections as per procedure laid down in latest version of
IRPWM and as directed by Engineer In charge.
Note: Release U/S bolt & nuts is to be deposited back. If any fish bolts
is jammed it should be cut with chisel and hammer and replaced with
fresh fish bolt supplied.
063051 For 1.00m long fishplates Joint 111.89

063052 For 610 mm long fish plates. Joint 78.78
063060 Opening and refixing of Joggled fish plates provided to weld joints/rail Set 44.52
of any rail section under traffic to enable examination of weld/rail by
departmental official nominated by Engineer In charge and lubrication
of fishplates by applying departmental Grease graphite grade 'O'
(IS:408) to fishing planes and bolts by departmental black oil as per
procedure laid down in latest version of IRPWM, including all tools
required and as directed by Engineer-in-charge.
Note:
1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for
work shall be given by department and issued at concerned SSE/PW
Stores.
2.Jammed fish bolts shall be cut using chisel and hammer and
replaced with new bolt.
063070 Lubrication of Elastic Rail Clips on PSC sleepers with contractor’s ERC 3.85
grease, conforming to Railway’s specifications, labour etc. complete
as per procedure prescribed in latest edition of IRPWM.
063080 Lubrication of Elastic Rail Clips on PSC sleepers as per procedure ERC 1.92
prescribed in latest edition of IRPWM with Railway’s grease.
063090 Lubrication of ERCs and its liner contact area by removal of ERCs and ERC 5.41
Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal /
GFN liners & SGCI insert by using wire brush, scrapper / sand emery
paper etc supply and application of graphite grease, as prescribed by
Railway for under side of liners & corresponding area of rail foot &
SGCI insert with ERCs and re-fixing the same as per procedure
prescribed in latest edition of IRPWM with contractors grease and all
other tools & plants complete and as directed.
Note: Each ERC in this item shall constitute 1 ERC and its Liner
Contact area.
44

063100 Removing seized ERC from SGCI inserts of existing track by using ERC 44.09
suitable approved chemicals and re-fixing after greasing of insert eye
and ERC with Contractor's grease of specified quality as per
provisions of IRPWM, as directed by Engineer in-charge.
Note:
1.List of Seized ERC along with location shall be prepared after
inspection of SSE/P.Way and marked prior to execution of this item.
2. Due care shall be taken to avoid any damage to the sleeper
3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper
factory shall be levied on each, if SGCI insert is broken or sleeper
gets cracked in the process.
063110 Lubrication of gauge face of rail on curves, cross overs, points & RM 5.22
crossings, turn-in curves and at locations as required with contractor's
grease graphite grade "O" IS 408 and as directed.
063120 Lubrication of Plate/Rail screws of Points and crossings, SEJs,

Bridges, Curves etc., with greases graphite, including removal of
screws carefully without damaging sleepers, cleaning with wire brush
etc., both screws and dowel hole, applying grease graphite, refixing
the screw and sealing the top and sides of screw with grease graphite
to prevent ingress of moisture and corrosion with contractors labour,
tools, consumables under traffic condition all lead and lift complete.
063121 By using Railway's Grease graphite Each 26.63

063122 By using Contractor's Grease Graphite Each 34.83
063130 Scattered renewal or replacement of missing / worn-out fittings with
Railway's fittings for track/Points & Crossings sleepers including
leading to required location for the work and the released fittings shall
be collected and neatly stacked, as directed by the Engineer In
charge.
Note: New fittings shall be supplied from and released material shall
be deposited at, nearest P.Way Stores.
063131 GRSP Each 17.61

063132 ERCs Each 5.88
063133 Metal/GFN Liners Each 3.92
063140 Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or Each 276.98
any approved methods, duly drilling holes in broken screw and
removing existing screw pieces from the holes along with existing
dowels and fixing new contractor's dowels (procured from RDSO
approved sources) and grouting around dowel with Epoxy materials of
approved specification and refixing new Railway's rail/Plate screws
duly greasing the screw with specified grease with all contractor's
materials, consumables, tools & plants, labour with all lead, lift.
Note:
1.Seized screws shall be identified and marked by JE/P.Way and
verified at minimum SSE/P.Way In charge) level.
2. Due care shall be taken to avoid any damage to the sleeper
3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper
factory shall be levied on each, if sleeper gets damaged in the
process.
064000 Drilling and Cutting Works
45

064010 Cutting / cropping of rail of 52Kg – 72 UTS or lighter section, manually
and perfectly vertical with contractor’s labour, hacksaw blade and tools
& plants.
Note:
1.Manual cutting should be used only in emergencies with prior
permission of sectional ADEN where machine cutting can not be
arranged in time.
2.Cutting of Rails with blade and forcing to part by using other means
to break the rails is prohibited.
3.Rails should be cut right through hacksaw blades only.
064011 On Cess Each 188.60

064012 In-situ situation Each 262.60
064020 Cutting / cropping of rail of 52Kg – 90 UTS, manually and perfectly
vertical with contractor’s labour, hacksaw blade and tools & plants -
Note:
arranged in time.
2. Cutting of Rails with blade and forcing to part by using other means
064021 On Cess Each 217.62

064030 Cutting / cropping of rail of 60Kg – 90 UTS, manually and perfectly
vertical with contractor’s labour, hacksaw blade and tools & plants -
Note:
arranged in time.
2. Cutting of Rails with blade and forcing to part by using other means
064031 On Cess Each 282.91

064033 Extra to item no. 064031 for cutting 110 UTS rail Each 42.44
064034 Extra to item no. 064032 for cutting 110 UTS rail Each 62.00
064040 Drilling of hole of different diameter and chamfering, in rail of any
section and any UTS manually only in emergencies with contractor's
labours, tools & plants, consumables etc.
064041 Hole of dia. 26.5mm and above Each 267.78
064042 Hole of dia. below 26.5mm Each 167.86
064050 Gas cutting of rail of various sections with contractor’s tools & plants,
as directed by engineer in-charge :
064051 Rail section of 90R and below Each 91.71
064052 Rail section of 52Kg and above Each 110.05
065000 Switch Expansion Joints (SEJs)
46

065010 Renewal of existing SEJ along with PSC sleepers under traffic block Set 6,805.29
conditions as per approved drawing including fixing of special size
bearing plate, rubber pad and other sleeper / rail fittings, greasing to
the fittings, leading all new materials to site, transportation of released
materials within a lead of 250m, cutting of Rails, drilling of holes, fixing
of related fittings, providing temporary connection with fishplates till
welding of SEJ is done and sleepers shall be given initial packing to
make track fit for 20KMPH speed.
Note:
(1) Rail cutting and hole drilling shall be paid separately.
(2) One set comprise complete SEJ on both rails at SEJ.
065020 Renewal of existing SEJ with improved SEJ with PSC sleepers under Set 7,463.15
traffic block conditions as per approved drawing including fixing of
special size bearing plate, rubber pad and other sleeper / rail fittings,
greasing to the fittings, leading rails, sleepers & fittings to site, leading
and stacking of released materials within a lead of 250m, cutting of
Rails, drilling of holes, fixing of related fittings, providing temporary
connection with fishplates till welding of SEJ is done and sleepers
shall be given initial packing to make track fit for 20KMPH speed.
Note:
(1) Rail cutting and hole drilling shall be paid separately.
(2) One set comprise complete SEJ on both rails at SEJ.
065030 Assembling and Laying of Improved Switch Expansion Joint (SEJ) on

PSC sleepers of any rail section as per RDSO drawing including
leading of SEJ rails, sleepers, fittings for a free lead of 250 metres,
cutting of rails, drilling of holes as required and lubrication of SEJ,
gauging, aligning rails, providing temporary connection with adequate
welding gap with adjoining rails, providing reference posts at SEJ, first
through packing of SEJ portion to make track geometry fit for 30
kmph speed and making ballast profile as per IRPWM.
Note:
065031 (1) RailConditions
Under cutting andnot
hole drilling Traffic
requiring shall be paid separately.
Block Set 5,894.28
065032 Under Traffic Block Conditions Set 6,483.71
065040 Dismantling & removing existing SEJ (Switch Expansion Joint) Set 7,989.04
assembly during line block and its replacement with plain track as of
adjoining section with all fittings including rail cutting and drilling of
holes and renewal of special sleepers with PSC Sleepers as directed
and aligning rails, providing fishplates and bolts/ temporary connection
with adequate welding gap with adjoining rail and ensuring proper
track geometry for 30 kmph speed. The release material shall be
stacked as directed by Engineer in charge.
47
IR Unified Standard Schedule of Rates -2021 Chapter -7: Turnouts and Renewals
CHAPTER - 7 : Turnouts and Renewals

071000 Dismantling Works
071010 Under Traffic Block:
Dismantling of existing BG turnouts, diamond crossings and derailing
switches with all types of rails and sleeper layout, removing rails,
switches, crossings, sleepers & fastenings, leveling of ballast to
correct profile & stacking all the released materials, sleepers,
fastenings, rails, switches & crossings including segregating &
stacking at specified locations in a neat and countable manner, within
the lead of 250m & all lift, clear of infringements, crossing of track, if
any complete, as directed.
Note:
1. This item shall be operated only when existing turnout is replaced
either with new turnout in case of TTR or with plain track when
existing turnout is no more required at that location.
2. Rail cutting will be paid extra under relevant item.
3. Laying of new turnout or plain track on prepared ballast bed, as
required, shall be paid separately under relevant item.
071011 1 in 8½ Turnout (Under Traffic Block) Set 26,335.16

071012 1 in 12 Turnout (Under Traffic Block) Set 30,208.76
071015 Diamond Crossing (Under Traffic Block) Set 40,565.33
071020 Under conditions not requiring Traffic Block:
Dismantling of existing BG turnouts, diamond crossings and derailing
switches with all types of rails and sleeper layout, removing rails,
switches, crossings, sleepers & fastenings, leveling of ballast to
correct profile & stacking all the released materials, sleepers,
fastenings, rails, switches & crossings including segregating &
stacking at specified locations in a neat and countable manner, within
the lead of 250m & all lift, clear of infringements, crossing of track, if
any complete, as directed -
Note:
1. This item shall be operated only when existing turnout is replaced
either with new turnout in case of TTR or with plain track when
existing turnout is no more required at that location.
2. Rail cutting will be paid extra under relevant item.
3. Laying of new turnout or plain track on prepared ballast bed, as
required, shall be paid separately under relevant item.
071021 1 in 8½ Turnout (Under conditions not requiring Traffic Block). Set 21,004.28
071022 1 in 12 Turnout (Under conditions not requiring Traffic Block). Set 22,769.02
071025 Diamond Crossing (Under conditions not requiring Traffic Block). Set 36,042.70
071026 Derailing Switch (Under conditions not requiring Traffic Block). Set 4,805.20
48

071030 Dismantling the existing BG Buffer-stop laid with rails & wooden/ST Set 3,880.35
sleepers including leading the dismantled Buffer stop materials to
nominated places within station yard limits and stacking as material-
wise and classification-wise duly releasing all fittings carefully without
causing any damage with all contractor's labour, tools, with all lead
and lifts, crossing of tracks if any, etc., complete as directed by the
Engineer-in-charge.
072000 Assembling, Insertion and laying Works
072010 Assembling complete BG Turnout on staging, clear of infringements,
to correct gauge and alignment as per standard drawings with all types
of rail sections over PSC sleepers at specified locations, duly leading
rails, special sleepers, switches, crossings with a maximum lead of
500m, all lift & crossing of track as required and testing points with
S&T staff for throw of switch etc. at station yard after levelling surface
complete including lubrication of all fastenings, complete in all respect.
Note:
1.Rail cutting and Drilling shall be paid separately
2. Required P.Way fittings/fastenings shall be supplied at the
SSE/P.Way stores.
072011 1 in 8½ Turnout Set 33,105.93

072012 1 in 12 Turnout Set 37,225.44
072013 1 in 16 Turnout Set 40,162.21
072014 1 in 20 Turnout Set 44,866.40
072020 Assembling all types of Switches on staging, clear of infringements,
to correct gauge and alignment as per standard drawings with all types
of rail sections over PSC sleepers at specified locations, duly leading
rails, special sleepers, switches with a maximum lead of 500m, all lift &
crossing of track as required including cutting, drilling, fixing of all
components, fittings etc. with housing of tongue rails as per
requirement of signaling including lubrication of fittings/fastenings,
complete in all respect.
Note: Required P.Way fittings shall be supplied at SSE/P.Way stores.
072021 1 in 8½ Turnouts Set 15,850.75

072022 1 in 12 Turnouts Set 18,202.84
072023 1 in 16 Turnouts Set 19,798.33
072024 1 in 20 Turnouts Set 20,974.38
072025 Derailing Switch Set 7,350.01
49

072030 Assembling on temporary staging and insertion of all types of turnouts
including diamond crossings and derailing switches on prepared
ballast bed during traffic block, manually or by contractor's cranes, at
specified location with 52Kg / 60Kg rail section on PSC sleepers with
Railways rails/sleepers available anywhere within 500m as per
standard drawing, duly leading sleepers, rails, switches, crossings,
fastenings etc. including rail cutting, drilling, fixing of all components,
fittings etc. with housing of tongue rails as per requirement of signaling
including crossing of track, filling and spreading of ballast in crib and
shoulder as required, linking of turnout with existing track, attending
track parameters including lifting, providing one round of packing to
make track fit for 20 kmph speed including lubrication of
fittings/fastenings, complete in all respect and as directed by Engineer
in-charge.
Note: Required P.Way fittings shall be supplied at the SSE/P.Way
stores.
072031 1 in 8½ Turnouts Set 51,356.96

072032 1 in 12 Turnouts Set 59,484.28
072033 1 in 16 Turnouts Set 66,234.96
072034 1 in 20 Turnouts Set 73,564.44
072035 Diamond Crossing Set 76,669.13
072040 Laying and linking of turnouts of all types including diamond crossings
& Derailing switches with 52Kg / 60Kg rail section on PSC sleepers on
prepared ballast bed for New lines or during total closure of section at
indicated location as per standard drawing, duly leading sleepers,
rails, switches, crossings, fastenings including rail cutting, drilling,
fixing of all components, fittings with housing of tongue rails as per
requirement of signaling, preparing ballast bed, filling and spreading of
ballast as required, linking of turnout with track, attending track
parameters including lifting, providing one round of packing to make
track fit for 20 kmph speed including lubrication of fittings/fastenings,
complete as directed by Engineer in-charge.
072041 1 in 8½ Turnouts Set 38,203.87

072042 1 in 12 Turnouts Set 44,373.44
072043 1 in 16 Turnouts Set 48,463.95
072044 1 in 20 Turnouts Set 53,105.69
50

072050 Laying and linking all types of turnouts, diamond crossings and
Derailing switches with 52Kg / 60Kg rail section on PSC sleepers on
ballast bed, prepared after dismantling & removal of existing
turnout/normal line during TTR/yard remodeling under traffic block, as
per standard drawing, duly leading sleepers, rails, switches, crossings,
fastenings including rail cutting, drilling, fixing of all components,
fittings with housing of tongue rails as per requirement of signaling,
preparing ballast bed, filling and spreading of ballast as required,
linking of turnout with track, attending track parameters including
lifting, providing one round of packing to make track fit for 20 kmph
speed including lubrication of fittings/fastening, complete as directed
by Engineer in-charge.
Note: Payment for dismantling & removal of existing turnout/normal
line, transportation/stacking of released material and preparing of
ballast bed is not included in this item and shall be paid under
relevant item.
072051 1 in 8½ Turnouts Set 42,024.26

072052 1 in 12 Turnouts Set 48,810.78
072053 1 in 16 Turnouts Set 53,310.34
072054 1 in 20 Turnouts Set 58,416.26
072060 Assembling on temporary staging and insertion of all types of switches
including TWS on prepared ballast bed during traffic block, manually
or by contractor's cranes, at specified location with 52Kg / 60Kg rail
section on PSC sleepers with Railways rails/sleepers available within
250m as per standard drawing, duly leading sleepers, rails, switches,
fastenings etc. including rail cutting, drilling, fixing of all components,
fittings etc. with housing of tongue rails as per requirement of signaling
etc. including preparation for operation of traffic block, including
crossing of track, filling and spreading of ballast in crib and shoulder
as required, linking with existing track, attending track parameters
including lifting, providing one round of packing to make track fit for
20 kmph speed lubrication of fittings/fastenings, complete as directed
Note: Required P.Way fittings shall be supplied at the SSE/P.Way
stores.
072061 1 in 8½ Turnouts Set 15,763.23

072062 1 in 12 Turnouts Set 20,681.55
072063 1 in 16 Turnouts Set 23,165.30
072064 1 in 20 Turnouts Set 25,085.64
073000 Lifting Works
073010 Lifting for increase in ballast cushion of existing points & crossing
layouts up to 75mm or part thereof including approach and exit
sleepers including one round of through packing, correcting the
disturbed sleeper spacing, tightening of fittings, boxing of ballast and
ramping out on either side at slope not steeper than 1 in 1000 or as
directed.
Note: Item will be paid only when lifting is 50mm or more.
073011 1 in 8½ Points & Crossing Set 11,409.93

073012 1 in 12 Points & Crossing Set 15,509.37
51

073017 Extra over item nos. 073011 to 073015 for additional lift beyond Each 15%
75mm for every 50mm or part thereof up to 225mm for each set
073020 Lifting the newly inserted BG 60 Kg. / 52 Kg. turnouts/ trap switches to
required level to provide full ballast cushion as per approved drawings
after initial laying with Railway's stone ballast in convenient stages
including one round of through packing after completion of final stage
of lift, levelling, aligning, gauging and boxing to standard profile to
make it fit for 20 kmph with all lead and lifts, complete in all respect
and as directed by the Engineer-in-charge.
Note:
1. The item shall be used only when UNIMAT is not available for the
work before the turnout is opened for operation.
2. Leading and dumping of ballast will be paid separately under
relevant item.
073021 For 1 in 8½ Points & Crossing Set 6,705.74

073022 For 1 in 12 Points & Crossing Set 8,459.78
073023 For 1 in 16 Points & Crossing Set 10,798.49
073024 For Derailing Switch Set 4,951.71
074000 Renewal Works
074010 Casual renewal of PSC sleepers on points and crossings, derailing
switches and diamonds portion of any layout including packing under
new sleepers. All the released materials shall be stacked at specified
location in a countable manner within the lead of 250m & all lift, clear
of infringements, crossing of track, if any complete, as directed with
contractor's vehicles, consumables, stores, labour etc. complete, as
Note: Approach and Exit sleepers shall be paid as normal sleepers
074011 under
Sleepersrelevant
up to item.
2.85 m length Each 516.98
074012 Sleepers of length more than 2.85 m and up to 4.20 m Each 711.87
074013 Sleepers of more than 4.20 m length Each 1,121.37
074020 Renewal of CMS Crossing of all rail sections with CMS crossing or
with WCMS crossing complete with fastenings including replacement
of worn-out rubber pads, liners and ERC, as required. All the released
materials shall be stacked at specified location in a countable manner
within the lead of 500m & all lift, clear of infringements, crossing of
track, if any complete, as directed. with contractor's vehicles,
consumables, stores, labour etc. complete, as directed by engineer in-
charge.
Note: Rail cutting and drilling shall be paid separately under relevant
item.
074021 1 in 8½ Turnout Set 3,262.73
074022 1 in 12 Turnout Set 3,569.68
074023 1 in 16 Turnout Set 3,876.64
074024 1 in 20 Turnout Set 4,187.11
52

074030 Renewal of Switch Rails (Tongue rails, Stock rails and fittings) of all
rail sections, under line block conditions ensuring proper housing &
changing of stretcher bars and fittings as required. Work also includes
drilling of hole, if any, and leading of rails laying anywhere in station
yard to site of work. Released switch rails shall be stacked at
indicated place in a countable manner within the lead of 250m & all
lift, clear of infringements, crossing of track, if any complete, as
directed. with contractor's vehicles, consumables, stores, labour etc.
complete, as directed by engineer in-charge.
Note:
1).One set means Two Tongue rails and Two Stock rails
(2) One tongue & stock rail shall be considered as 1/2 set.
(3) One tongue rail or one Stock rail shall be considered as 1/4 Set.
074031 1 in 8½ Switch Assembly Set 11,473.82

074032 1 in 12 Switch Assembly Set 12,774.83
074040 Through Switches Renewals of existing curved/Thick web switches
with Thick Web Switches on 60Kg Points and crossings including
approach rails as required, on PSC sleepers, removing and re-fixing or
replacing fittings, fastenings, stretcher bar, blocks etc., with housing
of tongue rails as per requirement of signaling etc. including
preparation for operation of traffic block, under line block conditions
and packing of any disturbed sleepers and boxing of ballast to profile,
picking of slacks of track at switch portion, crossing of track wherever
necessary. All the released materials shall be stacked at specified
location in a countable manner within the lead of 250m & all lift, clear
of infringements, crossing of track, if any complete, as directed with
contractor's vehicles, consumables, stores, labour etc. complete, as
directed by engineer in-charge.
Note: Rail cutting and Hole Drilling shall be paid under relevant item.
074041 For 1 in 12 Turnouts Set 26,171.80

074043 For 1 in 8.5 Turnouts Set 20,937.44
074050 Through renewal of Liners and ERCs on PSC turnouts without
damaging PSC sleepers. Scope includes removal of all ERCs and
Liners, cleaning rail seat, rail flange at liner seats, and eye of Inserts
with wire brushes and applying grease to liner contact area, eye of
insert and central leg of ERC with contractor's grease of Railway’s
specification, fixing all fittings in correct position and sealing liner
edges with grease all complete including collection and stacking of
released materials at nominated locations within SSE Jurisdiction as
Note: All the fittings will be supplied at SSE/Stores/Depot.
074051 1 in 8.5 Turnouts Set 2,537.57

074052 1 in 12 Turnout Set 4,086.28
074053 1 in 16 Turnout Set 4,420.77
53

074054 1 in 20 Turnout Set 5,461.91
074060 Through fitting renewal (TFR) with new Grooved Rubber Sole
pads(GRSP), Liners and ERC or through renewal with new GRSPs
using existing ERCs and liners after cleaning and greasing on entire
Turnout of PSC Fan shaped layout including approach & exit sleepers
comprising of removing & refixing or replacement of plate screws,
ERCs and liners including seized ERCs, replacing the GRSP after
cleaning rail seat, refixing slide chairs, lubrication of ERCs, applying
grease to plate screws and Liner contact area with contractor's Grease
Graphite Grade 'O' (IS:408) after cleaning of rust/scale on liner contact
area etc., as per provisions of IRPWM of latest version with all
contractor’s labour, tools, plants and stacking all the released
materials etc .complete and as directed by Engineer in charge.

074062 For 1 in 8.5 Turnouts Set 5,125.55
074070 Through renewal of Grooved Rubber Sole pads(GRSP) on Switch
portion of PSC fan shaped layout comprising of removing & refixing
Plate screws, ERCs including seized ERCs and liners, and replacing
the GRSP after cleaning rail seat, refixing Slide chairs, liner and ERC
after greasing and lubrication of ERCs, applying grease to liners and
Liner contact area with contractor's Grease Graphite Grade 'O'
(IS:408) after cleaning of rust/scale on liner contact area and on ERC,
with all contractor’s labour, tools, plants, leading of GRSP and
stacking all the released materials etc .complete and as directed by
Engineer in charge.
074071 For 1 in 12 Turnouts (Sleeper No 1 to 25 and 5 approach sleepers) Set 1,525.12
074072 For 1 in 8.5 Turnouts & Derailing switches (Sleeper No 1 to 22 and 5 Set 1,220.09
approach sleepers)
074073 For 1 in 16 Turnouts (Sleeper No 1 to 31and 5 approach sleepers) Set 1,830.14
074080 Through renewal of Grooved Rubber Sole pads(GRSP) on lead

portion of PSC fan shaped layout comprising of removing & refixing
ERCs, Liners including seized ERCs and replacing the GRSP after
cleaning rail seat, refixing the liner and ERC after lubrication of
ERCs, liners and Liner contact area with contractor's Grease Graphite
Grade 'O' (IS:408) after cleaning of rust/scale on liner contact area
and on ERC , etc., with all contractor’s labour, tools, plants, leading of
GRSP and stacking all the released materials etc .complete and as
directed by Engineer in charge.
074081 For 1 in 12 Lead portion (Sleeper Nos 26 to 64 & 74 to 83 and 8 Set 3,989.28
approach sleepers) :
074082 For 1 in 8.5 Turnouts (Sleeper No 23 to 42&59 to 54 and 8 approach Set 3,191.43
sleepers)
074083 For 1 in 16 Turnouts (Sleeper No 32 to 76 & 87 to 101 and 8 approach Set 4,787.14
sleepers)
54

074090 Through renewal of Grooved Rubber Sole pads(GRSP) on Crossing
portion of PSC Sleeper turnout duly removing the Liners, ERCs
including seized ERCs, and replacing the GRSP after cleaning rail
seat, refixing the liner and ERC after lubrication of ERCs, liners and
Liner contact area with contractor's Grease Graphite Grade 'O'
(IS:408) after cleaning of rust/scale on liner contact area etc., with all
contractor’s labour, tools, plants, transportation of GRSP, and stacking
all the released materials etc. complete and as directed by Engineer
in charge.
074091 For 1 in 12 Turnouts (Sleeper No 65 to 73 ) Set 1,135.33

074092 For 1 in 8.5 Turnouts (Sleeper No 43 to 48) Set 908.26
074093 For 1 in 16 Turnouts (Sleeper No 77 to 86) Set 1,362.40
074100 Renewal of corroded slide chairs duly removing the old slide chairs by Each 298.53
heating using contractors gas and equipments or by any approved
methods and inserting Railways new slide chairs and plate screws
including crossing of tracks, leading all required materials to site,
stacking all released materials, with all contractor's tools,
consumables, labour, lead, lift and incidental charges etc complete as
directed by the Engineer in charge.
Note:
1. All the fittings will be supplied at nearest SSE/Stores.
2. In case of damage of PSC sleeper, penalty at the rate of 25% of the
current cost of sleeper shall be levied.
074110 Fabrication, supply and fixing of hand operated lever boxes with pull Set 16,540.25
rod of 33mm dia to Drg.No. MA3040 including lead, lift, loading,
unloading, tools and plants, transportation, crossing of track wherever
necessary as directed by Engineer-in-charge at site.
Note:
1. Rate including Fabrication, Supply and Fixing of hand operated
boxes.
2. Spring point lever (Self reversing type) as per drawing no. TMC-12
(Sheet 1,2,3).
074120 Fabrication, supply and fixing of MS lock pins/bolts for stock and Set 1,175.51
tongue rails made out of MS 40mm dia of length 200mm with head
cutting, lathe machining, milling, drilling, welding the rod with MS flat of
6mm thick of suitable size as required at site with MS split pins/bolts
and supplying of remaining ancillary materials required at for locking,
including all taxes, lead, lift, loading and un loading , tools and plants,
transportation, crossing of track whenever necessary etc., complete
and as directed by Engineer-in-charge at site.
074130 Re-spacing of PSC sleepers of existing turnout after pre-marking of

sleeper locations as per standard layout drawings, removing ballast
and all other fittings/fastenings to clear obstruction for shifting as
required, shifting of sleeper at correct location, fixing of all
fittings/fastenings, ballasting, requisite packing, boxing and profiling,
complete as directed by Engineer-in-charge.
Note: Prior inspection and recording defective spacing and approval of
Engineer-in-Charge shall be mandatory for operating this item.
074131 Turnout sleepers of length up to 2.85 m Each 117.27
55

074132 Sleepers of length more than 2.85 m and up to 4.20 m Each 140.73
074133 Sleepers of length more than 4.20 m Each 152.45
56
IR Unified Standard SOR -2021 Chapter -8: Deep Screening and Ballast Related Activities
CHAPTER - 8 : Deep Screening and Ballast Related Activities

081000 Deep Screening Works
081010 Manual deep screening of Plain track/ turnouts under traffic as per
procedure prescribed in IRPWM, June 2020 or latest, in other than
PSC sleepers of any density and throwing away screened muck
arising out of screening on toe of bank or on cess, if low or on spoil
banks above top of cutting (including throwing and leveling, if required
beyond minimum 5m from the edge of cutting which are up to 3m deep
or alternatively carting it up to 50m for disposing it off beyond cutting
or platforms) as per direction of Engineer in-charge, including cutting
cess for effective drainage on both sides, one round of kutcha packing
with screened ballast and further attending to track parameter to make
track fit for 20 kmph speed complete in all respect.
Note : Payment shall be made for length along main line only for
turnouts.
081011 Depth of 150 mm below bottom of sleeper of Plain Track TRM 299.36
081015 Depth of 150 mm below bottom of sleeper for Turnouts TRM 478.98
081020 Manual deep screening of Plain track/ turnouts as per procedure
prescribed in IRPWM, June 2020 or latest, on PSC sleepers of any
density and throwing away screened muck arising out of screening on
toe of bank or on cess, if low or on spoil banks above top of cutting
(including throwing and leveling, if required beyond minimum 5m from
the edge of cutting which are up to 3m deep or alternatively carting it
up to 50m for disposing it off beyond cutting or platforms) as per
direction of Engineer in-charge, including cutting cess for effective
drainage on both sides, one round of kutcha packing with screened
ballast and further attending to track parameter to make track fit for 20
kmph speed complete in all respect.
Note : Payment shall be made for length along main line only for
turnouts.
081021 Depth of 150 mm below bottom of sleeper - For Plain Track : TRM 362.05
081030 Extra to item nos. from 081011 to 081018 and from 081021 to 081028 Each 4.70
for disposal of muck at a distance beyond 50m for every additional
lead of 50 metres or part thereof up to 500 metres for 1 TRM in
station yard / cutting.
57

081040 Extra to item nos. from 081011 to 081018 and from 081021 to 081028 Each 9.79
for disposal of muck for additional lift of 1 metre or part thereof beyond
3 metre lift in case of disposal of muck from track for 1 TRM in
station yard / cutting.
081050 Deep screening of turnout under line block within stipulated time by
way of removing the Points and Crossing assembly by using T-28
cranes, removing the entire stone ballast bed by excavators up to
shoulders to depth of 200/250/300 mm, limiting the digging up to
original formation level only, screening the ballast so removed and
stacking, spreading ballast on the formation in uniform layer from
stack of new/screened ballast, placing the points and crossing
assembly in designed position, dumping and spreading ballast in cribs
and shoulders, lifting of track as required so as to get a clean cushion
of 300mm, shifting of sleepers to correct spacing including removal
and re-fixing of fittings wherever necessary, aligning of sleepers as per
prescribed layout, initial packing, aligning, dressing/ lowering the cess
to deep screened depth up to the edge of bank with a slope of 1 in 30,
boxing of ballast to profile and making fit to run the trains at a speed of
non stop 20 KMPH as specified in IRPWM - June 2020 or latest
complete in all respect as directed by the Engineer - in - charge.
Note:
1. Rail cutting and Rail hole drilling shall be paid under relevant items.
2. Scooped ballast shall be screened and the unused quantity of
screened ballast shall be stacked for use in future.
081051 For 1 in 12 points and Crossings Set 43,279.00

081052 For 1 in 8.5 Points & Crossings Set 34,623.20
081053 For 1 in 16 Points & Crossings Set 51,934.80
082000 Spreading of Ballast
082010 Recoupment of ballast in running line with railway's stone ballast from
existing stacks available along alignment either on top of cutting or on
cess or at toe of bank by head leads or by any other means and
spreading to make up deficiency in the required profile with
contractor's labour, tools & plants, as directed by Engineer-in-charge.
Note: Payment shall be made based on ballast stack measurement.
082011 For average lead up to 50m and lift up to 5m Cum 91.70

082012 Extra over item no. 082011 for each additional average lead of 50m or Each 23.71
part thereof when total average lead exceeds 50m, but up to 250m.
Note: This item may be used only in exceptional circumstance under
prior order on record.
082013 Extra to item no. 082011 for each additional average lift of 1m or part Each 10.82
thereof when total average lift exceeds 5m.
58

083000 Lifting, Packing & Boxing Works
083010 Lifting and packing for regrading the existing PSC sleeper track to TRM 151.94
required height / level in stages not exceeding 75mm or part thereof at
a time, providing permissible ramp for the track, insertion of moorum /
sand / stone ballast uniformly under the existing track and placing the
same to safe approved gradient, gauge, cushion including levelling
and one round of through packing to allow train movement at restricted
speed of 30 kmph for a specified length with all leads & lifts and fixing,
marking, painting rail level pegs at every 30m interval.
Note: Lifting of track shall be done in stages as per procedure
prescribed in latest edition of IRPWM to get the proposed final level as
per approved working profile, as directed by Engineer in-charge.
083011 Extra for additional lift over 75mm for every 50mm lift or part thereof TRM 23.49
up to 275mm for item nos. 083010 for each TRM.
083020 Regrading the existing track by lowering up to required depth in stages TRM 526.18
by cutting the formation top maintaining the depth of existing cushion
finally, not exceeding 75mm in one stage including one round of
through packing and making track fit for 30kmph speed at each stage
of lowering as per procedure prescribed in latest edition of IRPWM
and subsequent picking up of sags / slacks and attending to
misalignment / cross level defects during train operation, providing
required ramp-in and ramp-out for safe passage of trains, including
cutting trenches across track at every 30m interval to the required final
formation level complete, and fixing, marking, painting rail level posts,
tie bars at every 30m interval as directed by engineer in-charge.
Note: The item shall be only operated only when formation is required
to be cut for lowering of existing track.
083030 Boxing and profiling of ballast as per procedure prescribed in latest TRM 22.36
edition of IRPWM including cess dressing on both sides of track. The
work will include removing excess ballast from track and putting the
same in crib and shoulder by leading to a maximum of 50m including
crossing of track, deweeding on ballast section etc and as directed by
Engineer-In charge.
083040 Removing, screening and salvaging ballast from track, duly digging / Cum 263.15
scarifying ballast by beaters / wire brushes or any mechanical means,
leveling and dressing formation with specified cross slope after
salvaging ballast, separating muck by screening the salvaged ballast
with contractor's 20mm size sieve, stacking of screened ballast for
measurement, disposing off muck at specified locations with all lead &
lifts as directed by Engineer in-charge.
Note: Payment shall be made for quantity of ballast stacked after
screening of retrieved ballast from track.
084000 Loading & Unloading of Ballast
084010 Loading Railway's ballast, collected at yard / depot into Railway's Cum 39.64
BOB / BKH / any other type of open wagon, using Mechanical Loader
or any other method with all lead and lifts, as directed by Engineer in-
charge.
084020 Leading and loading Railway's Ballast collected at yard / depot into Cum 99.80
Railway's covered wagon using any approved method with lead up to
250m & all lifts as directed by Engineer in-charge.
59

084030 Leading and loading Railway's Sand collected at yard / depot into Cum 54.37
Railway's covered wagon using any approved method with lead up to
250m & all lifts as directed by Engineer in-charge.
084040 Unloading of ballast from Railway's Hopper Wagons, quantity
distribution as per pre-defined site requirement, clearing
infringements/jammed ballast, distributing the unloaded ballast
084041 uniformly overBlock
Under Traffic the track, profiling and boxing following all prescribed
Conditions: Cum 44.74
084042 Under Conditions not requiring Traffic Block: Cum 33.99
084050 Unloading of Ballast from Railway's wagons other than Hopper
wagons by opening the doors of boxes and pulling & pushing down
ballast with rake irons / phowrahs and distributing unloaded ballast
uniformly over the track as required, clearing infringements/jammed
ballast, profiling and boxing following all prescribed safety norms.
084051 Under Traffic Block Conditions: Cum 101.60

084052 Under Conditions not requiring Traffic Block: Cum 83.16
084060 Unloading of sand / quarry dust during block from Railway's wagons Cum 95.24
other than Hopper wagons by opening the doors of boxes and pulling
& pushing down sand with rake irons / phowrahs taking out jammed
sand and distributing unloaded sand uniformly over the track.
085000 Supply of Ballast

085010 Manufacturing, supply and stacking of machine crushed Track Ballast
conforming to RDSO Specification (IRS-GE-1) with latest correction
slips at Railway depot or nominated location.
Note: Distance of nearest quarry mentioned in each sub-item is only
for the purpose of selecting the items for preparation of
estimates/tender schedule, based on the minimum distance between
nearest quarry and centre of supply points and will not affect the
selection of quarry during physical supply in any way till prescribed
specification is met fully.
085011 When distance of nearest quarry is up to 10 km Cum 831.71

085012 When distance of nearest quarry is more than 10 km and up to 20 km Cum 894.41
085015 When distance of nearest quarry is more than 40 km and up to 50 km Cum 1,045.80
085016 When distance of nearest quarry is more than 50 km and up to 100 km Cum 1,178.99
085017 When distance of nearest quarry is more than 100 km and up to 150 Cum 1,417.48
km
km
km
60
IR Unified Standard Schedule of Rates -2021 Chapter -9:Welding Activities
CHAPTER - 9 : Welding Activities

(Note: Items of this chapter shall be executed only through special tender)
091000 Supply of Alumino Thermic Welding Portions
091010 Manufacturing and Supply of Alumino thermic welding portions of
52Kg/60 Kg/60EI-R260 as approved by RDSO for welding of rails
52Kg/60Kg/60EI-R260 kg for 25mm gap by the process of AT welding
along with complete accessories confirming to the specification laid
down in Indian Railway Standard specification No.IRST-19-2020 up to
date correction slips with Single shot crucible fitted with Automatic
Tapping Thimble, 3 pieces pre fabricated mould (Zircon washed)
manually pressed using compressed air petrol/LPG pre heating for
execution of welding of rail joint as directed by the engineer in charge
at site.
Note:
1. The accessories along with welding portion shall be supplied as per
Annexure-I of the IRUSSOR - 2021.
2. Rate is inclusive of transportation of above to SSE/P.Way stores.
091011 For 60Kg 90 UTS Rails Each 2,132.75

091012 For 52Kg 90 UTS Rails Each 2,085.06
091013 For 60Kg/60EI- R260 rails Each 2,085.06
092000 Alumino Thermic Welding Works
092010 25mm gap 'in-situ' welding during traffic block and finishing of weld to
meet the prescribed tolerances and pass all stipulated tests with all
required labour, materials, consumables, tools, equipments etc. to
complete the work in all respect as per IR's "Manual for Fusion
Welding of Rails by Alumino - Thermic Process" with latest correction
slips, including marking of welded joint, painting weld collar with
anticorrosive paint, restoration of track near weld joint to original
position and fixing of joggled fish plate at new weld, to be removed
after passing of weld in USFD test as directed by Engineer in charge.
Note:
1. Welding shall be carried out only by trained welder having valid
competency certificate using RDSO approved Alumino Thermit
Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED)
manually pressed, Single shot crucible fitted with auto tapping thimble
and Compressed Air Petrol/LPG preheating technique as per RDSO
Specification No IRST/19-2020 with latest amendment.
2. Hydraulic Weld trimmer shall be used for chipping and profile
Grinder for finishing.
3. Only required nos. of Joggled fish plates shall be supplied by
Railway at nearest P. Way Stores and the same shall be returned at
nearest P. Way Store or at other location as per direction of Engineer-
in-Charge after release from track. All other items required shall be
supplied by the Contractor.
092011 For 60 Kg - 90 UTS Rail Each 4,079.73

092012 For 60 Kg/60EI - R260 grade Rail Each 4,026.75
092013 For 52 Kg - 90/72 UTS Rail Each 4,026.75
092014 For 90R Rail Each 4,026.75
61

092020 25mm gap 'in-situ' welding during traffic block using Railway's welding
portion and finishing of weld to meet the prescribed tolerances and
pass all stipulated tests with all required labour, materials,
consumables, tools, equipments etc. to complete the work in all
respect as per IR's "Manual for Fusion Welding of Rails by Alumino -
Thermic Process" with latest correction slips, including marking of
welded joint, painting weld collar with anticorrosive paint, restoration
of track near weld joint to original position and fixing of joggled fish
plate at new weld, to be removed after passing of weld in USFD test
as directed by Engineer in charge.
Note:
1. Welding portion and related accessories as per Annexure - I shall
be supplied by Railways. All other items required shall be supplied by
the Contractor.
competency certificate.
4. Required nos. of Joggled fish plates shall be supplied by Railway at
nearest P. Way Stores and the same shall be returned at nearest P.
Way Store or at other location as per direction of Engineer-in-Charge
after release from track.
092021 For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Each 1,725.84
Thimble , 3 pieces Mould (Zircon washed) and Compressed Air
Petrol/LPG pre heating technique
092022 For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Each 1,597.21
Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon
washed) and Compressed Air Petrol heating technique.
092023 For 52 Kg - 90 UTS or 52 Kg 72UTS Rail, Single shot crucible fitted Each 1,597.21
with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon
092024 For 90R Rail, Single shot crucible fitted with Automatic Tapping Each 1,597.21
Thimble Technology, 3 pieces Mould (Zircon washed) and
Compressed Air Petrol heating technique.
62

092030 25mm gap 'in-situ' welding during traffic block using Railway's welding Each 1,415.60
portion & Welder and finishing of weld to meet the prescribed
tolerances and pass all stipulated tests with all required labour,
materials, consumables, tools, equipments etc. to complete the work
in all respect as per IR's "Manual for Fusion Welding of Rails by
Alumino - Thermic Process" with latest correction slips, including
marking of welded joint, painting weld collar with anticorrosive paint,
restoration of track near weld joint to original position and fixing of
joggled fish plate at new weld, to be removed after passing of weld in
USFD test as directed by Engineer in charge.
Note:
1. Only welding portion and related accessories as per Annexure - I
and Welder shall be supplied by Railways.
3. Required nos. of Joggled fish plates shall be supplied by Railway at
nearest P. Way Stores and the same shall be returned at nearest P.
Way Store or at other location as per direction of Engineer-in-Charge
after release from track.
092040 25mm gap Cess Welding and finishing of weld to meet the
prescribed tolerances and pass all stipulated tests with Contractor's
labour, materials, consumables, tools, equipments etc. to complete the
work in all respect as per IR's "Manual for Fusion Welding of Rails by
Alumino - Thermic Process" with latest correction slips, including all
required handling and rehandling of rails, marking of welded joint,
painting weld collar with anticorrosive paint, as directed by Engineer
in charge.
Note:
competency certificate using RDSO approved Alumino Thermit
Welding Portions, 3 piece prefabricated mould (Zircon washed)
manually pressed, Single shot crucible fitted with auto tapping thimble
and Compressed Air Petrol/LPG preheating technique as per RDSO
Specification No IRST/19-2020 with latest amendment.
092041 For 60 Kg - 90 UTS Rail Each 3,116.63
092042 For 60 Kg/60EI - R260 grade Rail Each 3,077.97
092043 For 52 Kg - 90/72 UTS Rail Each 3,077.97
092044 For 90R Rail Each 3,077.97
63

092050 25mm gap Cess Welding with Railway's welding portion and finishing
of weld to meet the prescribed tolerances and pass all stipulated
tests with Contractor's labour, materials, consumables, tools,
equipments etc. to complete the work in all respect as per IR's
"Manual for Fusion Welding of Rails by Alumino - Thermic Process"
with latest correction slips, including all required handling and
rehandling of rails, marking of welded joint, painting weld collar with
anticorrosive paint, as directed by Engineer in charge.
Note:
1. Only welding portion and related accessories as per Annexure - I
shall be supplied by Railways.
competency certificate.
092051 For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Each 975.40
Thimble, 3 pieces Mould (Zircon washed) and Compressed Air
Petrol/LPG pre heating technique
092052 For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Each 975.40
Automatic Tapping Thimble, 3 pieces Mould (Zircon washed) and
Compressed Air Petrol/LPG pre heating technique.
092053 For 52 Kg - 90 UTS or 52 Kg-72 UTS Rail, Single shot crucible fitted Each 975.40
with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon
64

093000 Flash Butt Welding Works
093010 Flash Butt Welding of 90 UTS rails and finishing of weld to meet the
prescribed tolerances and pass all stipulated tests, conforming to IR’s
Manual for Flash Butt Welding of Rails with latest amendment, using
contractor’s self-propelled rail cum road / Mobile FBW Plants, tools,
equipments and consumables. Item also includes painting with
anticorrosive paint as approved and marking of welded joints, pre-
straightening & post-straightening of panels and USFD testing of
finished weld as directed by Engineer in-charge.
093011 52 Kg on Cess Each 3,336.01

093012 60 Kg on Cess Each 3,592.44
093013 52 Kg 'in-situ' under traffic block Each 3,890.11
093014 60 Kg 'in-situ' under traffic block Each 4,515.54
65
IR Unified Standard Schedule of Rates - 2021
Annexure - I
The accessories, meeting applicable RDSO Specification No IRST/19-2020 with latest amendment, are considered
integral part of AT welding portions of respective Rail section and shall be supplied free of cost as per following
yardstick.
Sl.No Description of Item Qty to be Supplied Remarks
**110 Units complete with every 1. The quantity to be
1 Pre-fabricated 3 piece moulds with cake piece
100 Portions supplied shall be in
3.5 Kg per portion in individual whole Nos in the
2 Dry Luting Sand
packets specified ratio or part
3 Single Shot crucible charge 1 No for each portion thereof.
4 Auto tapping thimble 1 No for each portion 2.**Extra quantity
**105 Units complete with every towards damages/
5 Ignition Matches
100 Portions breakages etc., and the
6 Mould shoe 1 Set per 50 Nos of Portions rates quoted are
7 Mould pressure clamp 1 Set per 500 Nos of Portions inclusive of this extra
8 Torch burner complete 1 Set per 200 Nos of Portions quantity and no extra
9 Torch burner Keys 1 per 500 Nos of Portions payment will be there
10 Goose neck arrangement for vaporization 1 per 500 Nos of Portions
11 Connecting Hose pipe 1 per 1000 Nos of Portions
12 Torch burner stand 1 per 1000 Nos of Portions
13 Aluminium / Steel rod for thermal plugging 1 per 800 Nos of Portions
14 Stop Watch 1 per 800 Nos of Portions
15 Adjustment spanner 1 per 800 Nos of Portions
16 Hot sets Chisels for emergency use 1 per 500 Nos of Portions
17 Pliers 1 per 800 Nos of Portions
18 Steel Wire brush 1 per 400 Nos of Portions
19 Slag Container Bowl 1 per 500 Nos of Portions
Weld Grinding Stone (Top Flexible High speed)
20 1 per 10 Nos of Portions
(150x120x50/22.23) mm)
Trimmer cutter hydraulic pressure pipe with
21 1 pipe per 300 Portions
connecting arrangement
22 Trimmer Cutter Blade (Fixing arrangement) 1 Set per 300 portions
23 Rail cover 1 Set per 100 portions
24 Hammer 1016 2 Nos per 800 portions
25 Thermal Chalks 1 per 800 Portions
26 10 cm Long Gauge 1 per 800 Portions
27 1 m long Gauge 1 per 800 Portions
28 Filler Gauge shims 1 per 800 Portions
29 Pressure Gauge 2 Nos per 800 portions
30 Weld Cover 1 Nos per 800 portions
66
IR Unified Standard Schedule of Rates - 2021 Chapter -10: Reconditioning of Points Crossings
CHAPTER - 10 : Reconditioning of Points and Crossings

101000 Built-Up Crossing
101010 In-situ re-conditioning of worn out 1:8½ built-up / fabricated crossing
on all types of rail sections under traffic by RDSO approved agency,
as prescribed in ‘IR's Reconditioning of Points & Crossings Manual’
with RDSO approved electrodes and suppliers, finishing & grinding
within permissible tolerance limit, as directed by engineer in-charge.
Note : One obtuse crossing shall be considered equivalent to two
nos. of 1:8½ crossing for payment.
101011 Using H3B electrodes Each 6,589.21

101012 Using H3C electrodes Each 6,676.44
101020 In-situ reconditioning of worn out 1:12 or flatter built-up / fabricated
crossing on all types of rail sections under traffic condition by RDSO
approved agency, as prescribed in ‘IR's Reconditioning of Points &
Crossings Manual’ with RDSO approved electrodes and suppliers,
finishing & grinding within permissible tolerance limit, as directed by
engineer in-charge :

102000 CMS Crossing
102010 Reconditioning of worn-out 1:8½ CMS (Cast Manganese Steel)
crossing on all types of rail sections on Cess or Depot by RDSO
approved agency, as prescribed in ‘IR's Reconditioning of Points &
Crossings Manual’ with RDSO approved electrodes and suppliers,
finishing & grinding within permissible tolerance limit, as directed by
engineer in-charge.
Note: One obtuse crossing shall be considered equivalent to two nos.
of 1:8½ crossing for payment.
102020 Reconditioning of worn out 1:12 or flatter CMS (Cast Manganese
Steel) crossing on all types of rail sections on Cess or Depot, as
prescribed in ‘IR's Reconditioning of Points & Crossings Manual’ with
RDSO approved electrodes and suppliers, finishing & grinding within
permissible tolerance limit, as directed by engineer in-charge.

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or
justifying rate. This amount/rate has been given for illustration purpose only.
67

102030 In-situ reconditioning of worn-out CMS (Cast Manganese Steel) Each 23,871.95
crossings of all types as per reconditioning manual and "Work
Procedure for In-Situ Reconditioning of CMS Crossing using Robotic
Welding Machine" of RDSO through approved agency, finishing &
grinding within permissible tolerance limit, as directed by engineer in-
charge.
Note:
(1) One obtuse crossing shall be considered equivalent to two nos. of
crossing for payment.
(2) Reconditioned crossing shall have Guaranteed service life of
minimum 80 GMT. In case of pre-mature reconditioning, it shall be
done by the contractor free of cost.
103000 Switches / Tongue Rails

103010 In-situ reconditioning of worn out 1:8½ tongue rail (only one tongue
rail along with connected stock rail) of all rail sections under traffic, as
prescribed in ‘IR's Reconditioning of Points & Crossings Manual’ with
RDSO approved electrodes and suppliers, finishing & grinding within
permissible tolerance limit, with all contractor's own power T&P, men
and materials including crossing the track, lead lift and as directed by
engineer in-charge.
103020 In-situ reconditioning of worn out 1:12 or flatter tongue rail (only one
tongue rail along with connected stock rail) of all rail sections under
traffic, as prescribed in ‘IR's Reconditioning of Points & Crossings
Manual’ with RDSO approved electrodes and suppliers, finishing &
charge :
103030 Reconditioning of worn out 1:8½ tongue rail (only one tongue rail
along with connected stock rail) of all rail sections on Cess or Depot,
as prescribed in ‘IR's Reconditioning of Points & Crossings Manual’
with RDSO approved electrodes and suppliers, finishing & grinding
within permissible tolerance limit, as directed by engineer in-charge.

103040 Reconditioning of worn out 1:12 or flatter tongue rail (only one tongue
rail along with connected stock rail) of all rail sections on Cess or
Depot, as prescribed in ‘IR's Reconditioning of Points & Crossings
Manual’ with RDSO approved electrodes and suppliers, finishing &
charge.
104000 SEJ, Weld and Rail
68

104010 Re-conditioning of worn out all types of SEJs of all rail sections to the
standard profile by using H3B electrodes as per RDSO drawing and
prescribed in ‘IR's Reconditioning of Points & Crossings Manual’
including grinding to finished tolerances etc. complete.
Note: Two stock rails + Two tongue rails will constitute one set of
SEJ.
104011 On Cess condition Set 9,104.80

104012 In-situ under traffic condition Set 10,657.98
104020 Re-conditioning of cupped welded joints 'in-situ' by using CP-3032 Each 662.41
powder under traffic conditions as per RDSO’s guidelines for ‘IR's
Reconditioning Of Scabs, Wheel Burns of Rail And Cupped AT
Welded Joint’
104030 Repairs/Reconditioning of scabbed rails & wheel burns on tongue Sq cm 19.87
rails / running rails/stock rails etc in situ using Micro flow thermal
spray technology by using CP – 3032 powder as approved and as per
RDSO / LKO and as per specifications with all Contractor’s material,
labour, tools, powder, equipment and consumable, with all lead and
lift complete and as per the instructions of the Engineer-in-charge at
site.
Note: Inventory of scabs/wheel burn area should be prepared duly
test checked at ADEN level before starting of the work.
104040 In-situ reconditioning of MCI insert of points & crossings sleeper by Each 264.80
reclaiming the worn-out portion to the desired height, grinding of the
finished profile for regaining the toe load lost. The reconditioning to be
done by using TERRA C I-94 - Electrodes of make L & T, Advani
Oerlicon, Diffusion, SHARP - 650, or equivalent approved by RDSO
for reconditioning of Cast iron alloys. removing and refixing the
required fittings for reconditioning in traffic condition. The cost
includes all labour, lead lift, transportation of men and material, cost
of consumables, hiring of machinery required etc, complete and as
directed by the Engineer-in -charge.
69
IR Unified Standard Schedule of Rates - 2021 Chapter -11: Formation Rehabilitation
CHAPTER - 11 : Formation Rehabilitation

(Items only for Rehabilitation of poor formation of running line )
111000 Rehabilitation of weak formation by Replacement of Weak Soil
111010 Rehabilitation of existing week formation by replacing top layers of
existing formation only with mechanically manufactured blanketing
material of specified formation width and thickness under
traffic/power block or without traffic block by blocking the line for
longer period by diverting the traffic or otherwise. The item includes
all things necessary to complete the work, all in accordance with the
latest applicable specifications, guidelines, manuals instructions and
includes, more particularly, and without in any way limiting the
generality of liability to complete the work in all respect e.g. (i)
dismantling/lifting of track panel by crane, (ii) scooping of ballast from
track, screening & stacking along track (iii) removal of top layers of
existing formation up to 550 mm (iv) spreading of blanketing material
in layers not exceeding in 30 cm in thickness in loose conditions,
leveling by motor grader & compacting by vibro roller of required
capacity up to specified degree of compaction to achieve a comp
(v) placing 4m width of Non-woven Needle Punched and

Mechanically or Thermally bonded type Geo-textile with minimum
strengths in Grab test, Trapezoidal Tear test and Puncture test of
1750N, 800 N and 5800 N respectively (vi) spreading new/screened
ballast layer of 200mm uniform thickness over it and compaction by
rollers (vii) linking of track panels with Crane and connecting at both
ends, initial packing and leveling (viii) screening of scooped ballast,
stacking and using the same at the same location or adjacent location
along with additional ballast to provide specified cushion and profile
(ix) disposal of waste material at nominated place (x) all pre and post
attention during required nos. of machine tamping (xi) removal of
service rails with rail panel and distressing of track after final packing
& surfacing and all other incidental works required to complete the
work in all respect.
Note:
1. Net quantity of blanketing material considered under this item as
4.455 cum per TRM as per assumed teoretical profile of 7.0m
formation width and 0.55m depth (excluding extra quantity required
for compaction) . If the net quantity required as per approved
designed cross section is different, extra payment or deduction shall
2. Minimum number of Machineries and plants to be available at site
in working order is as under:
(i) Crawler Crane 20 MT - 2 nos.
(ii) Crawler mounted Hydraulic Excavator 0.92 cum bucket capacity -
4 nos.
(iii) Motor Grader 3.71 m Blade - 1 no.
(iv) Tandem Vibratory roller 8 - 10 tonne capacity - 2 nos.
111011 Under Traffic Block TRM 10,121.49
111012 Not requiring Traffic Block by diverting traffic on diversion or blocking TRM 9,210.09
the line for longer duration till completion of rehabilitation work.
Note: Cost of diversion, if any, is not included in this item.
70

111020 Extra/Deduction in the rate of item nos. 111011 & 111012 for
increase / decrease in net compacted quantity of blanketing material
required as per approved designed cross section over net compacted
quantity of 4.455 cum per TRM considered in above items, for
theoretical profile of 7.0m formation width and 0.55m depth (excluding
extra quantity required for compaction).
111021 Extra for increase in compacted quantity Cum 1,442.67
111022 Deduction for decrease in compacted quantity Cum -1,442.67
111030 Extra/Deduction in the rate of item nos. 111011 & 111012 for
increase / decrease in area of Non-woven Needle Punched and
Mechanically or Thermally bonded type Geo-textile required as per
approved design over net quantity of 4.0 Sqm per TRM considered in
above items.
111031 Extra for increase in area Sqm 268.56

111032 Deduction for decrease in area Sqm -268.56
112000 Soil Testing
112010 Slope stability calculation and design for Railways Embankment /
Cutting more than 6 meters height based on soil materials &
parameters as per RDSO's latest standards and specifications, duly
conducting relevant lab test, e.g. cohesion and angle of internal
friction etc. and submitting report for approval duly showing the cross-
section dimensions for embankment / cutting for each cross section.
112011 Embankment Each 483.06

112012 Cutting Each 572.44
113010 Cess repair/widening work as per RDSO Specifications and Cum 254.95
guidelines RDSO/2020/GE: IRS-0004 or latest in running line with
suitable soil to the designed profile The work shall include uprooting
and disposing of all the vegetation, benching at every 30 Cm vertical
height, earthwork in benching portion and compaction using suitable
slope vibratory Rollers/Compactors etc. to achieve prescribed MDD.
Note:
1. Payment of cess repairs shall be based on the quantities worked
out from the cross sectional calculations only and worked out from the
initial ground levels before doing benching and final levels as done for
new embankment. The earth work in benching portion shall not be
paid extra as the same has been included in the rate.
2. The earth work shall be started only after Completing of the
benching and certified.
3. The benching Work shall be done for a maximum height of 1.50 m
at any time based on the progress of earthwork starting from toe of
the embankment.
71

113020 Extra over item 113010 for earth-work for making cess on other side Cum 25.49
of the track (when no approaches available along track or no road
vehicles to work at site) by dumping contractor's own earth, collected
along toe of bank of any height on to other side of track & side slope
of the existing bank by head load, duly crossing of tracks with all
contractor's materials, labour, tools, plant including loading of earth in
baskets, lifting, leading to the non-cess side of bank including
crossing of tracks & dumping etc. and as directed by the Engineer in-
charge.
113030 Excavation for widening of existing formation in cuttings in hard soils Cum 444.24
which require picks or crow bars for hacking including soils containing
stones or boulders of size under 0.03 cum without infringing the
nearby track, as directed by engineer-in-charge at site including
cutting of earth, loading, leading by contractor’s vehicles, unloading at
site, dumping on spoil bank by head loads and utilising same
excavated earth for widening of existing formation in embankment as
per standards, duly rolling manually at 2:1 slope and levelling bank to
the required profile including watering and compaction with
contractor's labour or mechanically operated rollers with all
contractor's labour, clearing of jungle, benching etc., tools, plants,
vehicles etc. complete with lead up to 1000m and all lifts including
crossing of track, wherever necessary.
72
IR Unified Standard Schedule of Rates - 2021 Chapter -12: Activities at Construction Sites
CHAPTER - 12 : Activities at Construction Sites

Item. No. Description of Item Unit Rate (₹)
121010 Dismantling of existing LWR/SWR track of any structure, removing TRM 155.79
rails, sleepers, fish plates, cutting of rails, segregation and stacking of
released Rails, Sleepers and fitting at nominated location in countable
manner within a free lead of 500m, levelling of ballast to correct
profile for laying new track over it, all as per direction of Engineer-in-
Charge.
121020 Dismantling existing sand humps in yards from end of turnout to end Each 11,369.79
of sand hump. Scope includes dismantling of track and brick / stone
masonry on either sides of track, removing sand and earth to the
required level including clearing site and stacking released materials
within maximum lead of 250m, clear of infringement, complete and as
directed.
122000 Shifting & Pairing Works

122010 Shifting & pairing of rails / panels unloaded alongside existing running
track to adjoining formation of a new line including crossing of one
track, duly lifting & pushing rail / panel without damaging it and taking
all necessary precautions, so as not to infringe the running track, as
Note: The rail barricading, if disturbed during working, should be
restored to its original condition by the agency including re-fixing &
concreting as required.
122011 Rail length up to 13m - Under Traffic Block RM 16.94

122012 Rail length up to 13m - Under Conditions not requiring Traffic Block RM 13.80
122013 For rails/panels of more than 13m and up to 40m length - Under RM 25.09
Traffic Block
122014 For rails/panels of more than 13m and up to 40m length - Under RM 17.89
Conditions not requiring Traffic Block
122015 For rails/panels of more than 40m length - Under Traffic RM 36.71
122016 For rails/panels of more than 40m length - Under Conditions not RM 26.07
requiring Traffic Block
122017 Extra over item No 122011 for crossing each additional line RM 1.69
73

123000 Laying & Linking Works
123010 Providing Centre Line / Rail Level, reference Pegs on formation at an
interval of 30 metres on one side or at centre of proposed / existing
track, as directed by engineer in-charge for linking of new track / CTR
/ Deep Screening / Lifting / Lowering works, duly embedding in
formation including marking with contractor's paint.
Note:
(1) Rails/tie bar of suitable size bar shall be supplied by the Railways
from nearest Stores Depot. In case of hard wood peg, the hard wood
will be supplied by the contractor.
(2) Excavation and concrete work, if required, will be paid separately.
123011 With Rail pegs Each 118.98

123012 With Tie bar pegs Each 78.52
123013 With contractor's hard wood pegs of 50 mm dia and 60 cm long Each 109.54
123020 Installation of reference points for track centre line in main and loop Each 550.07
lines, in straight or curve portion, SRJ for turnouts, heel of crossing
(HOC), locations of derailing switches, switch expansion joints etc.
away from formation on firm ground at known offset with MS Angles
of 50mmx50mmx5mm thick of length 1.80 m each, founded in
concrete block of size 30cm x 30cm x 45cm of nominal mix 1:3:6,
including painting to reference pegs with two coats of enamel paints
on exposed surface, as directed by Engineer In charge.
Note: Earth work and Cement concrete will be paid under relevant
items.
123030 Spreading of ballast, from existing stacks available along formation Cum 42.38
on top or at cess, in required uniform thickness, compaction of
ballast layer laid on new formation at all the locations with smooth
wheeled power roller of 8-10 tonne capacity to sufficient number of
passes to form consolidated ballast bed of approximately 250mm
thickness to a width of 4m symmetrical to centre line of proposed
track in correct line & level with all ascents & descents, as directed by
Engineer in-charge.
Note: Item is inclusive of (a) providing ramp for taking roller to
formation and removing the same & making good formation after
completion of work; (b) redistribution & leveling of excess ballast
while rolling to obtain uniform plane cambered surface.
74

123040 Linking of BG track (except at LC, Bridges and SEJs) with any type of
rail section and sleeper of specified density, on ballast bed spread
and compacted with suitable roller, over prepared formation
including leading free rails/welded panels available along the
alignment on to formation, leading and spreading all fittings and
fastenings, spreading of sleepers at specified spacing, squaring,
placing of rails over sleepers and fixing rails to sleepers with all types
of fittings and fastenings to correct gauge & alignment, lubrication of
fittings and fastenings with contractor's grease as per IRPWM
standards with contractors labour, tools, consumables, with all lead,
lifts etc. complete and raising, levelling and initial packing of track to
make it fit for 30 kmph and meet other prerequisites prescribed in
Indian Railway Track Machine Manual for deployment of Tamping
Machine.
Note:
1.Rail cutting and Hole drilling shall be paid separately.
2.Spreading of ballast and compaction shall be paid separately under
relevant item.
123041 For sleeper density of 1660 sleepers per km TRM 252.88
123042 For sleeper density of 1540 sleepers per km TRM 234.75
123050 Linking of track at level crossing locations as per RDSO drawings TRM 378.34
with any type of rail section and sleeper on prepared formation
including leading free rails/welded panels available along the
alignment on to formation, spreading of sleepers at specified spacing,
squaring, placing of rails over sleepers and fixing rails to sleepers
with all types of fittings and fastenings to correct gauge & alignment,
excavating level crossing portion as necessary, fixing check rails to
running rails, providing C.C blocks, chairs, anti corrosive painting to
running rails and check rails, lubrication of fittings and fastenings with
contractor's grease as per IRPWM standards with contractors labour,
tools, consumables, with all lead, lifts etc. complete and raising,
levelling and initial packing of track to make it fit for 30 kmph and
meet other prerequisites prescribed in Indian Railway Track Machine
Manual for deployment of Tamping Machine.
Note: Rail cutting and hole drilling, if required, shall be paid
separately under relevant item.
75

123060 Linking of BG track (with guard rail ) over ballasted deck bridges with TRM 366.51
any type of rail section and PSC sleeper including leading free
rails/welded panels available along the alignment on to bridge,
leading and spreading all fittings and fastenings, leading & spreading
of sleepers at specified spacing, squaring, placing of rails over
sleepers and fixing rails & guard rails to sleepers with all types of
fittings and fastenings to correct gauge & alignment, lubrication of
fittings and fastenings with contractor's grease as per IRPWM
standards with contractors labour, tools, consumables, with all lead,
lifts etc. complete and raising, levelling and initial packing of track to
make it fit for 30 kmph and meet other prerequisites prescribed in
Indian Railway Track Machine Manual for deployment of Tamping
Machine.
Note:
1.Rail cutting and Hole drilling shall be paid separately.
2.Spreading of ballast and compaction shall be paid separately under
relevant item.
3. This item shall be applicable only when track is with Guard Rail.
Linking without guard rail be paid under relevant item for plain track
linking.
123070 Linking of track on Girder Bridge with Steel Channel/H-beam sleepers TRM 501.88
as per approved drawings including leading of running and guard
rails, sleepers and fittings, bending of guard rails, notching, drilling of
holes, cutting of rails etc. as per IRPWM with latest correction slips
and making track structure fit for normal speed.
Note:
1) Rails, Steel Channel/H-beam sleeper and all fittings will be
supplied by Railways.
2)Transportation of track material if supplied beyond 250m of bridge
approaches, shall be paid separately under relevant item.
123080 Carrying out cut & connection to the existing PSC sleeper track under Each 54,926.71
line block of any rail section and sleeper density to connect the same
to newly linked track which is laid by the side, duly carrying out cutting
of rails, insertion of additional PSC sleepers, if required, providing fish
plated joints including drilling of holes, slewing required length of both
tracks to prescribed alignment, adjusting sleeper spacing, providing
continuity to track, spreading of ballast to provide cushion, shoulder
ballast to the track stretch, giving one round of initial packing to make
track fit for 20 kmph speed and boxing of ballast to profile as directed
by Engineer in charge.
123090 Shifting / Slewing the existing or newly assembled track of any rail
section with any type of sleepers and any density under line block to
correct locations & alignment and attending to one round kutcha
packing to run safely at 20KMPH speed with all contractors tools and
consumables complete and as directed by Engineer in-charge.
123091 Maximum Shifting / Slewing up to 1 metre TRM 176.25

123092 Maximum Shifting / Slewing for more than 1 metre & up to 2 metres TRM 211.53
76

123100 Assembling, laying and linking of Broad Gauge track over CC apron, TRM 188.23
RCC/CC Bed Blocks etc. to correct level & alignment, fixing of all
fittings with rails / panels, aligning & leveling correctly, as directed by
engineer in-charge. Rate is inclusive of cutting rails, drilling holes for
fixing fish plates, lubrication of fittings & fastenings, fixing reference
pillars, arrangement for keeping assembly in correct position while
concreting, as required.
123110 Fixing all types of free rails / rail panels over pit line for BG track with TRM 123.22
inserts, elastic rail clips, MS liners and grooved rubber pads below rail
to correct spacing, gauge, alignment and level with above fittings &
fastenings in position, duly providing full complements of rail fittings.
Required nos. of inserts per bearing shall be fixed at the time of
concreting bed block over pit wall to correct spacing, centre to centre,
alignment & levels as per IR’s approved drawing.
124010 Construction of Sanded Dead End as per RDSO’s Drawing no. RT- Each 9,392.32
347 (with all amendments) with brick-work using country bricks or CC
bricks in mud mortar and filling with river coarse sand, surrounding
rails and filling around.
Note: Cost of brick and sand is not included in the rate.
124020 Working of the Railway Push Trolley by arranging one Head

trollyman along with 3 trollymen as per Railway's rules and
stipulations for conducting inspections by Railway officials and as
Note:
1) Labourers supplied should be of skilled in case of head trollyman
and semiskilled in case of trollymen and capable of pushing trolley in
all gradients, and levels duly observing all safety precautions as per
the manual.
2) The labour engaged should be physically fit for strenuous work,
literate and meeting prescribed medical category.
124021 For Full day (8 hrs ) Each 2,940.79

124022 For Half day (4 hours) Each 1,893.18
124030 Providing Caution Watchman at a location where caution order is
imposed and ensuring to be on continuous vigil and exhibit necessary
hand signals to the trains for their passage over caution spot.
Note:
1) Prescribed protection equipment shall be supplied by Railways
and the same shall be returned after work is over.
2) If Contractor fails to post watchman at any time during one day,
penalty at double the accepted rates will be levied and
3) The watchman nominated by the contractor will be screened for
suitability as per Railway norms.
124031 For one shift ( 12 Hrs) Each 1,054.29

124032 For Half Shift (4 hours) Each 355.89
77

124040 Preparation of completion drawings of yard in AutoCAD, showing all
the details, such as circulating area, approach road, platform shelter,
platform, FOB etc., showing relevant particulars to appropriate scale
as per IR's Engineering Code on approved quality, transparent media
as per details supplied by Railways, including submission of check
print for proof checking, duly incorporating the suggested corrections
and modifications and supplying the final plot on approved quality &
transparent media with six copies of ammonia prints complete and
soft copy, as directed by Engineer in-charge
Note:
(i) Drawings shall be prepared by using latest drawing making
softwares AutoCAD, Work station etc. and printing shall be done on
high end latest plotters.
(ii) Stage Payment - (a) For check print - 40% (b) For Paper tracing -
40% (c) For Ammonia print & soft copy - 20%.
124041 Completion drawing of yard at junction station Each 6,709.76

124042 Completion drawing of building Each 4,716.23
124043 Completion drawing of land plan Km 4,676.09
124044 Completion drawing of way side station Each 2,642.43
124050 Dismantling / removing the existing bearing plate and fixing new Each 62.41
bearing plates supplied by Railways in pit lines, duly breaking /
chiselling CC to required depth, so as to fix new bearing plates etc.
with all contractor's labour, tools, lead, lift, transportation etc.
including crossing of tracks complete and as directed by Engineer in-
charge (concrete work for fixing will be paid separately)
78
IR Unified Standard Schedule of Rates - 2021 Chapter -13: Maintenance Activities
CHAPTER - 13 : Maintenance Activities

131000 Through Packing Works
131010 Through packing of track, as per procedure prescribed in latest
edition of Indian Railways Permanent Way Manual
For PSC sleeper Track
131011 For PSC sleeper Track with Sleeper Density of 1540 Sleepers/Km or TRM 88.78
more
131012 For PSC sleeper Track with Sleeper Density of less than 1540 TRM 76.34
Sleepers/Km
For other than PSC Sleeper Track
131013 For other than PSC Sleeper Track with Sleeper Density of 1540 TRM 76.09
Sleepers/Km or more
Sleepers/Km (M+4)
131020 Picking up of slacks in track of all sleeper density, duly opening up
ballast, gauging, alignment, correcting longitudinal & cross levels,
packing, boxing of ballast and dressing the same under traffic
conditions as per procedure prescribed in latest edition of IRPWM
and as directed by Engineer in-charge.
Note: In-charge section Engineer should identify locations requiring
packing and obtain prior approval of DEN/XEN before execution of
the work when there is no Zonal Track Maintenance agency deployed
in the section.
131021 For PSC Sleeper TRM 76.09
131022 For other than PSC Sleeper TRM 66.07
131030 First or Second Through Packing of track of all sleeper density
including giving a general lift, as desired to eliminate sag after Deep
Screening work, lifting of track, lowering of track and major
realignment of curves and formation rehabilitation as per procedure
prescribed in latest edition of IRPWM.
Note: General lift is normally 25 mm and isolated lift may be up to 50
mm.
131031 For PSC Sleeper Track with Sleeper Density of 1540 TRM 106.53
131040 Third or subsequent Through Packing of track for all sleeper density
including picking of slacks, as required after second through packing,
subsequent to Deep Screening work as per procedure prescribed in
latest edition of IRPWM. This item can also be used after
lifting/regrading/realignment works also.
Note: General lift is normally 25 mm and isolated lift may be up to 50
mm.
79

131050 Through packing of points and crossings, derailing switches including
gauging, fittings recoupment, ballasting as required, elimination of
sag and to the required alignment after Deep Screening as per
procedure prescribed in latest edition of IRPWM complete as per
direction of Engineer-in-charge.
Note: This work shall be operated in exceptional cases with written
approval at DEN level when UNIMAT is not available and immediate
packing is required to pass train over it.
131051 1 in 8½ PSC layout Set 9,756.24

131052 1 in 12 PSC layout Set 12,686.32
131053 1 in 16 PSC layout Set 14,473.81
131054 1 in 8½ Derailing Switch Set 1,389.11
131055 1 in 12 Derailing Switch Set 1,980.48
131060 Packing of isolated loose PSC sleepers on plain track below the Sleeper 68.95
bottom of the sleepers and surrounding through out its length duly
opening two galas on either side of the renewed sleepers and
packing the sleeper to bring the track to normal speed including
gauging, aligning, squaring of sleepers and sectioning of ballast to
the required profile with all contractor's labour, tools and plant etc.
including all lead and lift and crossing of tracks where ever necessary
complete and as directed by the Engineer-in-charge.
131070 Slack picking of joint sleepers and 3 approach sleepers on either Each 480.90
sides giving required lift to make up general track level, packing and
profiling as directed.
132000 Systematic Overhauling Works
132010 Systemic overhauling of track under traffic as per procedure
prescribed in latest edition of IRPWM , including removing the crib
ballast in 50mm to 75mm depth below bottom of sleeper and
complete shoulder ballast without breaking core under the bottom of
sleeper, to recover clean ballast by screening on wire mesh and
disposing off the muck including throwing & leveling, if required
beyond minimum 5m from the edge of cutting which are up to 3m
deep or alternatively carting it up to 50m for disposing it off beyond
cutting or platforms away from the track, as directed by Engineer in-
charge including cutting & making up the cess and ensuring proper
drainage slope and then re-inserting cleaned ballast into track and
compaction of shoulder and crib ballast by wooden mallet and
dressing / profiling ballast as per railway specifications.
132011 For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or TRM 151.23
more
132012 For PSC sleeper Track with Sleeper Density less than 1540 TRM 114.74
sleepers/Km
132013 For other than PSC sleeper Track with Sleeper Density of 1540 TRM 132.33
sleepers/Km or more (M+7)
80

132014 For other than PSC sleeper Track with Sleeper Density of 1340 TRM 101.99
sleepers/Km (M+4)
132015 Extra over Items 132011 to 132014 for working in yards TRM 39.16
132020 Overhauling of fish plated / welded joint track sleepers including 3 Each 1,079.80
approach sleepers on either sides up to 50mm below bottom of
sleepers in crib & shoulder, replacing rounded ballast, recouping
deficient ballast within 50m lead, replacement of worn-out fittings
supplied by Railway, as directed as per procedure prescribed in latest
edition of IRPWM.
133000 Pulling Back & End Cropping Works
133010 Pulling back of rails / panels on running track for creep adjustment or
other incidental activities by removing and re-fixing all the fittings, and
fastenings including squaring of sleepers and slack picking of
displaced sleepers, as directed.
133011 For rails up to 13 metre length TRM 30.79

133012 For rail panel above 13 metre & up to 40 metre length TRM 33.87
133013 For rail panel more than 40 metre length TRM 36.96
133020 Pulling of welded rail panels to create a specified gap under traffic
block, including opening of fittings & fastenings and re-fixing them on
track after pulling of rail and creating standard gap for welding.
133021 For Rail panel more than 13m and up to 40m length RM 18.48
133022 For Rail panel more than 40m length RM 21.59
134000 Re-Alignment of Curves
134010 Slewing and realigning of curves under traffic line block condition, as
directed by Engineer in-charge with contractor's labour, tools &
plants, as required with general lift up to 25mm including one round of
through packing, ballast profiling, loosening/tightening of P.Way
fittings, if required and other incidental works.
Note: Payment will be made based on average slew calculated in
each 50m length of track by averaging absolute values of positive and
negative value of slews.
134011 Other than PSC Sleeper track - Maximum slew up to 50mm TRM 90.11
134012 Other than PSC Sleeper track - Maximum slew more than 50mm and TRM 107.19
up to 100mm
134013 Other than PSC Sleeper track - Maximum slew more than 100mm TRM 119.26
and up to 150mm
134014 Other than PSC Sleeper track - Maximum slew more than 150mm TRM 133.34
134015 PSC Sleeper track - Maximum slew up to 50mm TRM 106.43
134016 PSC Sleeper track - Maximum slew more than 50mm and up to TRM 134.17
100mm
134017 PSC Sleeper track - Maximum slew more than 100mm and up to TRM 155.04
150mm
134018 PSC Sleeper track - Maximum slew more than 150mm TRM 177.79
81

135000 Destressing Works
135010 De-stressing of LWR/CWR track of any density under traffic line block
with contractor's labours, tools, equipments and consumables
inclusive of all lead & lift. Activities include cutting of LWR/CWR into
convenient panels of specified length, removal of ERCs, liners,
greasing of ERCs and liner contact area, lifting rails and keeping
them on rollers provided at every 15 sleepers, working out elongation
of rail ends depending on prevailing site conditions, pulling rails with
the help of Hydraulic Tensor to achieve the desired elongation,
cutting rails, as required, removing rollers and placing rail in position,
re-fixing ERCs & liners and adjustment of gap at SEJs :
Note:
(1) Welding of rail joints will be paid separately.
(2) Rail cutting and Hole drilling shall be paid separately.
(3) Opening and closing of LC if required will be paid separately.
(4) As per procedure prescribed in latest edition of IRPWM & CE's
Circulars for destressing of LWR/CWR, if any.
135011 With Railway’s Hydraulic Rail tensor TRM 44.44

135012 With Contractor’s Hydraulic Rail tensor TRM 46.13
135013 Without Rail tensor TRM 43.04
135020 Providing temporary Buffer Rails of fish plated joints of 3 pairs, Set 7,117.40
measuring 6.5m each, duly removing rails of the existing track
including cutting & drilling of rails as required for isolating LWR/CWR
on all types of track structure. Work will be done under traffic block
condition.
Note:
1.Each set comprises of 3 pairs of rails 6.5 m long only.
2.Only Rails fish plate and fish bolts will be supplied free by Railway
within free lead of 250m.
136000 Renewal and Miscellaneous Works
136010 Fixing Joggled Fish Plates with bolt / clamp (supplied by Railway from
nearest SSE Store) in running track conditions at welds on rail, as
directed by engineer in-charge (drilling of holes in rail, if required,
shall be paid separately).
136011 With 2 bolts Set 94.06
136012 With 4 bolts Set 104.54
136013 With Clamps Set 133.94
136020 Providing wooden blocks under weld joint duly transporting Railway’s Each 138.48
released wooden blocks with rail screw / dog spikes and doing
packing, as directed under traffic condition.
Note: Wooden blocks, rail screws/dog spikes will be supplied free at
SSE/P.Way depot.
136030 Removing the existing wooden blocks under joint, duly removing Each 39.51
fittings, transporting and stacking material wise in a countable manner
and handing over the wooden blocks & fittings at PWI's Depot or as
directed by Engineer in charge.
82

136040 Maintenance of track on main line & loops, Points & crossings etc.
including special attention to section for carrying out various
maintenance works listed in Indian Railways P.Way Manual / Bridge
Manual for safe running of goods and passenger trains with
contractor's tools / labours etc. complete, as directed by Engineer in-
charge.
Note: Contractor shall arrange one gang at any point of time
comprising of minimum specified labours with sufficient experience in
P.Way working.
136041 One mobile Gang comprising of 15 physically fit labours plus 1 Mate. Gang Day 12,126.15
Note:
(1) In case, contractor provides less no. of Labour/Mate or for non
availability of vehicle, payment will be deducted for each such person
or non-availability of vehicle @ 20% of the accepted item rate,
separately for each shortfall.
(2) The Contractor shall keep one pick up Truck of minimum 1.5T
payload capacity with Driver all the time and all expenditures for
running at an average of 80 kms per day shall be born by the
Contractor.
136042 One Gang comprising of 20 physically fit labours plus 1 Mate. Gang Day 13,103.76
Note: In case, contractor provides less no. of Labour/Mate, payment
will be deducted for each such labour @ 10% of the accepted item
rate.
136050 Interchanging gauge face of rails of any section in traffic line block TRM 82.38
including removal of fittings and re-fixing the same after changing of
gauge face, cutting of rails, joining the rails with fish plate & drilling
holes as directed by engineer in-charge.
136060 Replacing existing glued joint rail with cut rails or with glued joint rail Each 1,546.42
or insertion of glued joint by cutting existing track under traffic
condition by cutting rails, refixing with all rail sleeper fastenings and
providing required gaps for carrying out welding as an alternative to
drilling holes or joining rails with fish plates duly drilling holes as
required including stacking of released material and as directed by
engineer in-charge.
Note:
(1) Drilling holes & rail cutting will be paid separately.
(2) Transportation of materials to the site of work from supply points,
if more than 250m, shall be paid separately.
136070 Fixing of Wooden Distance Block of size 1.0m x 0.3m x 0.15m

between track and platform wall.
136071 With Railway’s wooden block (by cutting Railway’s wooden sleepers Each 180.97
into blocks by sawing to size)
136072 With Contractor’s hard wood block. Each 2,237.31
136080 Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and Each 280.17
fixing the dowels with adhesive of RDSO approved quality for fixing
check rails & guard rails, as directed by Engineer in-charge.
83

136090 Cleaning of side drains along the track including disposing of muck RM 27.48
beyond Railway boundary as per instructions of Engineer in-charge to
keep drains clean and clear in cuttings etc.
136100 Removing weeds & bushes in ballast section and cess up to 3.95m TRM 12.65
from centre line of track in mid section & station yard, as specified by
Engineer in-charge including disposal of branches, bushes outside
cess/yard.
136110 Trimming of tree branches coming within 6m of centre line of track & Each 145.67
those obstructing views of Curves/LCs / Signal / Indicator at locations
in section & station yard, as specified by Engineer in-charge including
disposal of branches, bushes outside cess/yard.
Note: Girth of more than 20 cm will only be considered as tree
branch.
136120 Making kutcha trapezoidal side drain of bottom width as 300mm and RM 108.52
depth of 450mm in cutting section by excavation in all types of soil
including utilising excavated muck for dressing of cess, slopes etc. in
Railway land.
136130 Providing Assistant to Patrol man for patrolling during cold / hot
weather on track for protecting track as per IRPWM.
Note:
1.The person deployed for patrolling must have the following items:
• Valid certificate of competency issued by Railways.
• Fit for A-3 medical category - certificate issued by registered
medical practitioner
2.Necessary equipments prescribed shall be supplied by Railways for
each patrolman and same to be handed over back to Railways in
good condition.
3.The following equipment to be arranged by contractor for each
patrol man:
H.S.Flags Green -1 No (Standard size), H.S Flags Red- 2 Nos.
(Standard size),Torch light 3 cell -1 no., Staff for flags -1 no., Whistle
Thunder - 1no, Protective clothing to withstand climate, Gum boots,
Haver sack.
136131 For duration of 8 hrs. Each 731.85

136132 For 12 hrs. duration Each 1,081.05
136140 Providing Assistant to Patrolman for monsoon / security patrolling
whenever required for protection of track as per IRPWM (for a
duration of 12 hours).
Note:
1.The person deployed for patrolling must have the following items:
• Valid certificate of competency issued by Railways.
• Fit for A-3 medical category - certificate issued by registered
medical practitioner.
2.The equipment supplied by Railways shall be handed over back to
Railways in good condition:
84

3.The following equipment to be arranged by contractor for each
patrol man:
• H.S.flags (standard size): Green – 1 no. & Red - 2 Nos.
• Torch (3 cell) – 1no.; Staff for flags – 1no.; Whistle thunder – 1no.
•Protective cloth to withstand the climate; Gum boots; Haver sack
136141 For Day shift Each 731.85

136142 For Night shift Each 909.80
137000 Marking and Painting Works
137010 Anti-corrosive painting of rail outside track on rail bottom, web, foot
and fishing plane with two coats of thickness of 100 microns each by
bituminous black paint confirms to IS-9862 of reputed make including
surface preparation, as a complete job as per procedure prescribed in
latest edition of IRPWM.
137011 For 60 Kg Rails RM 47.09

137012 For 52 Kg Rails RM 41.84
137020 Anti-corrosive painting of rail on running track of any sleeper density
on web, foot etc. including liner contact area (excluding bottom of
foot) and fishing plane as per requirement with two coats of thickness
of 100 microns each by bituminous black paint confirms to IS-9862 of
reputed make including painting of liners, ERCs and including
surface preparation, as a complete job as per procedure prescribed in
latest edition of IRPWM
Note: 60% of payment shall be made if painting on only gauge face
side is done.
137021 For 60 Kg Rails TRM 64.80
137022 For 52 Kg Rails TRM 57.57
137030 Anti-corrosive painting to weld collar for Thermit welded rail joints on trackEach 17.94
or on cess for new welded joints to p
137040 Anti-corrosive painting to weld collar for Thermit welded rail joints on Each 19.94
track for old painted joints in normal corrosive prone area for any rail
section with two coats of ready mixed bituminous black paint of
reputed make confirming to IS:9862 latest version on welded area
up to 10cm on either side including on the underside of rail foot by
brush including surface preparation as per Railway's AT Weld Manual
including lettering / weld numbering with approved enamel paint as
directed
Note:
1.Before painting, dust, dirt and flaked paint from the welded joint
shall be removed thoroughly by scrapping with wire brush. Grease
and oil shall be removed by use of appropriate solvent confirming to
latest IS:1745.
2.Use of detergent followed by water washing should also be done to
ensure removal of oil and grease apart from the greasing compound.
3.The paint should be procured along with the thinner recommended
by the manufacturer of the paint.
85

track or on cess for new welded joints to protect against severe
corrosion for any rail section with one coat of high build epoxy paint
(two pack) of reputed make confirming to RDSO Specification
M&C/PCN-111/99 on welded area up to 10cm on either side including
on the underside of rail foot by brush including surface preparation as
per Railway's AT Weld Manual including lettering / weld numbering
with approved enamel paint as directed
Note:
Before painting, dust, loose rust and mill scale and dirt shall be
track for old painted joints in severe corrosive prone area for any rail
section with one coat of high build epoxy paint (two pack) of reputed
make confirming to RDSO Specification M&C/PCN-111/99 on welded
area up to 10cm on either side including on the underside of rail foot
by brush including surface preparation as per Railway's AT Weld
Manual including lettering / weld numbering with approved enamel
paint as directed
Note:
1.Before painting, dust, dirt and flaked paint from the welded joint
shall be removed thoroughly by scrapping with wire brush. Grease
and oil shall be removed by use of appropriate solvent confirming to
latest IS:1745:
2.Use of detergent followed by water washing should also be done to
ensure removal of oil and grease apart from the greasing compound.
3.The paint should be procured along with the thinner recommended
by the manufacturer of the paint
4.No other thinner like kerosene oil should be used
137070 Marking, inscribing, painting, writing, bordering etc. on new / old iron
surface at various locations of Points & Crossings with details of turn-
in / turn-out reference station mark on rail web for one set, duly
preparing surface with contractor's wire brush and applying two coats
of yellow synthetic enamel paint of approved quality as background
and stenciling the details to suitable size, as described for every
curve reference station mark / switch / crossing details with black
enamel paint of approved quality complete, as directed :
Note: Stenciling of letters is only permitted. No hand written letters
are accepted.
137071 1 in 16 Turnout Set 1,657.37

137072 1 in 12 Turnout Set 1,102.01
137073 1 in 8½ Turnout Set 712.05
137074 Derailing Switch Set 356.03
137080 Painting 2 coats to various P.Way Reference Post, Structures etc.
with enamel paint of approved make with 2 coats of different colours
& letters, as directed by Engineer in-charge.
137081 Kilometre & Gradient post Each 84.69
137082 Hectometre Post Each 97.40
137083 LWR / SEJ Board Each 149.18
137084 Level Crossing Boards including Road Sign Boards Each 169.92
86

137085 Level Crossing Post Each 167.83
137086 Curve Post Each 89.51
137087 Level Crossing Boom including fringe Metre 139.15
137088 Level Crossing Boom without fringe Metre 113.72
137089 Curve Board Each 149.18
137090 Curve details, SE, Versine, Station Nos. etc. per station. Each 47.93
137100 Painting 2 coats to Bridge Reference / Boards, Structures etc. along

track with enamel paint of approved make with different colours &
letters, as directed by Engineer in-charge.
137101 Bridge Board Each 149.18
137102 Bridge Tablet Each 42.64
137103 Bridge Height Gauge Each 2,534.72
137104 HFL, FSL & DL on Bridge Pier / Abutment Each 634.63
137105 Miscellaneous General Boards, Jurisdiction Boards, Structures etc. Sqm 115.99
137110 Attending the CC apron repairs under the sleeper where there is Each 1,724.10
separation of PSC Sleeper along whole periphery and puncturing of
apron under the sleepers, chiselling as required including removal of
foreign materials from the sleeper trench and dewatering duly filling
cement concrete with CONBEXTRA-GP2 or similar, the narrow gaps
completely including pouring, finishing, curing to match with the
existing C.C.apron surface and slopes complete, labour charges in
traffic block and as per the direction of Engineer In charge.
87
IR Unified Standard SOR - 2021 Chapter -14: Testing of Rails and other Components
CHAPTER - 14 : Testing of Rails and other Components

141000 USFD Testing of Rails
141010 Ultrasonic testing of single rails, required for fabrication of points and RM 36.11
crossings by using double crystal normal probe 4.0 MHz frequency
with water / oil couplant. The rails shall be tested by probing from the
rail head top, rail head side and web with typical oscillogram pattern
for various probe positions as per 'Indian Railways Standard
Specification for Ultrasonic Testing of Rails and Welds', as applicable
to rails for fabrication of points & crossings. The rates are inclusive of
contractor’s men, materials & machines complete and as directed.
141020 Carrying out Through USFD testing of running rails & welds
(excluding flange testing) including level crossings, lead portion of
points and crossings and scabbed rail testing of all types of rails by
NBC (Need Based Concept) method under traffic conditions as per
provisions of IR’s "USFD Manual & Specifications for Ultrasonic
Testing of Rails and Welds" with latest correction slips & related
instructions, duly marking defects, submission of daily reports and
storing back-up data, as specified & directed.
Note:
The SRT/DRT machine should have minimum of 9 probes (including
370 forward /backward probe for detecting bolt hole cracks.
141021 With Contractor’s USFD machine TRM 5.47

141022 With Railway's USFD machine including related T&P and probes TRM 4.35
142000 USFD Testing of A.T. Welds
142010 Carrying out USFD testing of Alumino Thermic (AT) welds on all types
of rails, using 0º (2 MHz) double crystal; 70º (2 MHz) 20mm x 20mm
single crystal probe for head & flange testing; 2 nos. 45º (2 MHz)
single crystal with tandom rig for testing from rail top to bottom & for
half moon testing and 70º (2 MHz) 20mm x 20mm side looking probe
by NBC (Need Based Concept) method under traffic conditions as per
provisions of IR’s "Manual & Specifications for Ultrasonic Testing of
Rails and Welds" & related instructions duly marking the defects,
submission of daily reports and storing back-up data as specified &
directed. The rates are inclusive of contractor’s men, materials &
machines complete unless otherwise specified and directed.
142011 Track having up to 3 rail panels - With Contractor’s USFD machine : Each 168.09
142012 Track having more than 3 Rail panels - With Contractor’s USFD Each 154.09
machine.
142013 Track having up to 3 rail panels - With Railways’ USFD machine Each 148.63
including related T&P and probes :
142014 Track having more than 3 rail panels - With Railways’ USFD machine Each 134.02
88

143000 USFD Testing of Flash Butt Weld
143010 Carrying out USFD testing of Flash Butt (FB) & Gas Pressure (GP)
welds on all types of rails using 2 single crystal 45º (2 MHz) for head
testing and one single crystal 70º (2 MHz) probe for web & flange
testing by NBC (Need Based Concept) method under traffic
conditions as per provisions of IR’s "Manual & Specifications for
Ultrasonic Testing of Rails and Welds" & related instructions, duly
marking the defects, submission of daily reports and storing back-up
data as specified & directed. The rates are inclusive of contractor’s
men, materials & machines complete unless otherwise specified and
directed.
143011 Track having up to 3 rail panels - With Contractor’s USFD machine : Each 178.72
143012 Track having more than 3 rail panels - With Contractor’s USFD Each 163.83
machine :
143013 Track having up to 3 rail panels -With Railway's USFD machine Each 159.26
143014 Track having more than 3 rail panels - With Railway's USFD machine Each 145.99
144000 USFD Testing of SEJ
144010 USFD testing of Switch Expansion Joint (SEJ) by NBC (Need Based
Concept) method under traffic conditions as per provisions of "IR’s
Manual & Specifications for Ultrasonic Testing of Rails and Welds"
with latest amendments & related instructions, duly marking the
defects, submission of daily reports and storing back-up data, as
specified in the special conditions, as applicable to rail testing. The
rates are inclusive of contractor’s men, materials & machines
complete unless otherwise specified and directed.
Note: One set consists of both SEJ on left and right rail.
144011 With Contractor’s USFD machine Set 1,264.60

144012 With Railway's USFD machine including related T&P and probes Set 1,130.81
144020 Providing an assisting gang comprising of 4 men per day with Gang Day 2,352.09
SSE/P.Way/ USFD for carrying out ancillary works viz., lookout,
watering, paint marking and handling machine for USFD test with
Single Rail Tester (SRT) machine and as directed by Engineer in
charge.
Note:
1. This item shall be operated only when there is no departmental
staff available and only with the prior approval of concerned Sr.
DEN/Co-ordination.
2. In case, contractor provides less no. of Labour, payment will be
deducted for each such person @ 50% of the accepted item rate.
89

144030 Providing an assisting gang comprising of 6 men per day with Gang Day 3,521.45
SSE/P.Way/ USFD for carrying out ancillary works viz., lookout,
watering, paint marking and handling machine for USFD test with
Double Rail Tester (DRT) machine and as directed by Engineer in
charge.
Note:
1. This item shall be operated only when there is no departmental
staff available and only with the prior approval of concerned Sr.
DEN/Co-ordination.
2. In case, contractor provides less no. of Labour, payment will be
deducted for each such person @ 1/3 rd of the accepted item rate.
90
IR Unified Standard Schedule of Rates - 2021 Chapter -15: Heavy Track Machines
CHAPTER - 15 : Heavy Track Machines

151000 PQRS Related Works
151010 Unloading of mono-block PSC sleepers in PQRS Depot using Each 5.36
Railway's Portal crane from wagons and stacking them at the end of
Assembling Line with all leads & lift.
Note:
1.Unloading to be done within the stipulated time as and when loaded
BFRs are received, so as to hand over empty BFRs without
demurrage;
2.If unloading is not done within the stipulated time, the demurrage
raised by the Railways shall be borne by the Contractor.
3.Contractor has to arrange necessary tools etc., complete for
unloading from BFR’s and stacking.
151020 Assembling of 13m / 12.6m long track panels in PQRS Depot by TRM 33.55
spreading PSC sleepers already unloaded and stacked, to correct
spacing as per specified sleeper density per km, using Railway's
portal crane, placing service rails on them and fixing rails to sleepers
with standard fastening properly to get correct gauge with all
contractor’s labour, tools, plants etc.
151030 Loading pre-assembled panels with PSC sleepers in layers on BFR TRM 4.91
with Railway's Portal Crane in PQRS Depot, complete in such a
manner that it may be dispatched in train formation to mid section, as
151040 PQRS: Pre Block activity: Removing of the existing ballast from crib TRM 27.50
portion of the full length of existing PSC sleeper and further up to the
bottom of sleepers to accommodate new sleeper and dumping the
ballast so removed on the shoulders/cess with contractor own labour,
tools and plants etc, complete with all lead and lift and as directed by
the Engineer-in-charge at site including crossing of track wherever
necessary.
151050 PQRS: During line block activity: Dismantling existing track, levelling TRM 34.86
disturbed and uneven surface of bed up to bottom of sleeper, Loading
the released panels in to BFR with Railway's portal cranes, Placing
new panels from BFRs on to track with Railway's portal crane, Linking
of Track with all fittings, placing ballast as required in crib and
shoulders, aligning and surfacing of track, attending track parameters
and initial packing to track to allow traffic at restricted speed of 20
kmph with contractor's labour, tools etc, complete and lead & lift as
directed by the Engineer-in-charge at site including crossing of track
wherever necessary.
Note: The PQRS cranes with fuel and operators will be provided by
Railway.
TRM in to track18.50
151060 PQRS: Post Block activity, Pulling back the left over ballast from shoulders/cess and dumping in cribs
151070 Unloading of released track panels consisting of all types of rails &
sleepers from Railway wagon at PQRS Depot, using portal cranes
including dismantling of released panels to rails, sleepers &
fastenings and stacking them material-wise and classification-wise at
nominated locations within the yard limits with all leads, lift and
crossing of tracks.
91

151071 With Railway’s portal crane for PSC sleeper track TRM 48.44
151072 With Railway’s portal crane for other than PSC sleeper track TRM 29.09
151080 Mechanised loading of all types of rails on BFRs in PQRS Depot with RM 8.75
Railway's cranes, as directed by engineer in-charge.
151090 Providing group of 2 men for doing various miscellaneous works for Day 1,182.74
Railway's PQRS cranes (one set of 2 portals) for proper upkeep of
crew rest van / rest room, as directed by the machine in-charge by :
(1) Fuelling the machine, duly bringing diesel / hydraulic oil from the
stacked drums;
(2) Bringing water to the staff rest van or staff rest room, cleaning rest
van / rest room, cooking food for Track Machine staff or bringing food
from outside (cost of food shall be borne by the staff concerned).
151100 Guarding and watching the Track machine / group of machines, spare Shift 691.71
parts, oils, grease etc. of PQRS cranes (one set of 2 portals) during
day and night time in a shift of 12 hours each, at all locations
wherever necessary, as instructed by the machine in-charge.
Note: One shift comprises of 12 hours.
151110 Laying of auxiliary track with all types of rails, already available on TRM 37.50
cess, fixing rails on wooden blocks / CST-9 pots at 2m interval, true to
square, to required alignment & level, fixing with spikes / screws /
keys, linking rails with fish plates, bolts & nuts to a gauge of 3400mm
(with reference to centre line of existing BG track), levelling both the
rails to same plane as that of BG track over stone ballast by way of
removing ballast from shoulders of existing track, providing one round
of packing. Subsequently, dismantling auxiliary track after completion
of PQRS work at site by way of removing wooden blocks / CST-9 pots
and carrying same to next stretch / location, if required, where
auxiliary track has to be laid and spreading the same at required
locations and leaving rails there itself for carrying out TRR work later.
151120 In PQRS work, through rail renewal of BG track on PSC sleepers of

any density with all types of rails / rail panels lying in auxiliary track or
on cess for replacement of service rails including handling of rails by
way of dragging, pairing etc. and leading released service rails to load
into BFR / Lorry or to shift to next location including crossing of track
with lead & lift and any other incidental works as required.
151121 For rails up to 13m length TRM 98.41

151122 For rails of more than 13m and up to 40m length TRM 92.71
151123 For rails above 40m length TRM 92.57
151130 Through Rail renewal with free service rails of all types by removing existing
TRM 98.41 cut into free r
running rails, already
152000 Track Relaying Train (TRT) Related Works
92

152010 Carrying out preparatory works before operation of Track Relaying TRM 26.95
Train (TRT), such as –
(1) Broken corroded sleepers to be removed and fastenings to be
loosened;
(2) Excess ballast to be removed up to bottom of sleepers;
(3) Check rails of level crossings falling in the range of work to be
removed;
(4) In case of CTR, rail panels placed at 1.5m away from existing
track centre;
(5) All existing longer wooden sleepers if available or interlaced
sleepers of different height to be removed;
(6) Cutting of existing rails to 6m piece closure at work site from
where Track Relaying Train (TRT) will start working on that day;
(7) Removal of Reverse jaw type CST-9 sleeper if available joggled
fish plates, OHE bonds & other obstructions etc.
8. Removal of Guard Rails at bridge locations other than Girder
Bridges.
9. Rail cutting and drilling shall be paid separately under relevant
152020 Loading of PSC sleepers in layers on BRH (special type modified
BFR for TRT / PQRS working) by using contractor’s Gantry (Crane) in
TRT / PQRS Base Depot, placing dunnage (wooden beddings /
wedges) between sleepers to cover entire layer of sleepers, complete
in such a manner that it may be dispatched in train formation.
152021 Mechanised loading with Railway's cranes Each 3.93

152022 Mechanised loading with Contractor's cranes /Hydra Each 8.67
152030 Unloading of released sleepers from BRH (special type modified BFR Each 8.57
for TRT working) in Depot by using contractor’s Gantry (Crane) and
stacking them at nominated locations within the yard limits with all
leads & lift.
153000 T-28 Machine Related Works
153010 Dismantling of existing Turnout by removing switches, rails,
crossings, check rails, sleepers and all fixtures and stacking all
released materials, removing ballast and muck by excavating up to
required depth, preparation of formation bed, laying of pre assembled
Turnout by Railway's T-28 machine, linking of track with all fittings,
filling up of ballast duly screened, packing, adjusting, opening &
housing of switch, testing operation of switch assembly and attending
track parameters, so as to make track fit for 20 kmph speed including
disposing off muck to indicated places up to free lead after the block
working etc. complete.
Note: Rate includes making necessary preparation for T-28 machine
movement like preparation of approaches, transportation and laying
of wooden sleepers/blocks, etc.
153011 1 in 8½ Turnout Each 45,220.42

153012 1 in 12 Turnout Each 52,056.61
153013 1 in 16 Turnout Each 58,900.16
153014 1 in 20 Turnout Each 64,074.77
93

153020 Dismantling of existing switch by removing switches, sleepers,
fixtures and stacking all released materials, removing ballast and
muck by excavating up to required depth, preparation of formation
bed, laying of pre-assembled switch by Railway’s T-28 machine,
linking of track with all fittings, filling ballast duly screened, aligning,
packing, adjusting, opening & housing of switch, testing operation of
switch assembly and attending track parameters so as to make track
fit for 20 kmph speed including disposing off muck to indicated places
after the block working etc. complete.
Note: Rate includes making necessary preparation for T-28 machine
working/movement such as providing and removing rail closures,
preparation of approaches, transportation and laying of wooden
sleepers/blocks, etc.
153021 1 in 8½ Switch Each 19,365.04

153022 1 in 12 Switch Each 21,952.35
153023 1 in 16 Switch Each 24,914.94
153024 1 in 20 Switch Each 28,138.03
153025 Derailing Switch Each 10,983.53
154000 BCM / FRM Machine Related Works
154010 Carrying out preparatory works for operation of Ballast Cleaning TRM 13.79
Machine (BCM) which includes making trench in track for inserting
cutter bar, supporting track on wooden block supplied by Railway,
removal of ballast along with muck from shoulder which is out of
reach of cutter chain and putting the same in cutting width or between
rails. Rate includes all miscellaneous works, e.g. opening and re-
fixing of joggled fish plates, OHE Bonds, dismantling & removing
obstructions etc.
154020 Carrying out various works during operation of BCM, like filling up of TRM 33.34
ballast at deficient location from locations where ballast is excess or
from adjoining tracks, required initial packing, adjustment of PSC
Sleepers, provision wooden blocks supplied by department and
attending track parameters etc. complete so as to make track fit for 20
kmph speed.
154030 Removal of screened muck discharged by BCM, where muck TRM 25.30
disposal on side slope is restricted due to platform, cutting, OHE mast
etc. and disposing it beyond 5m from edge of cutting up to 3m deep
or alternatively carting it up to 50m for disposing off beyond the end of
cutting / platform and making up cess wherever low.
154040 Removal of screened muck discharged by FRM/SBCM where muck TRM 16.87
disposal on side slope is restricted due to platform, cutting, OHE mast
etc. and disposing it beyond 5m from edge of cutting up to 3m deep
or alternatively carting it up to 50m for disposing off beyond the end of
cutting / platform and making up cess wherever low.
TRM beyond 50m2.35

154050 Extra to item nos. from 154030 and 154040 for disposal of muck at a distance for every additiona
154060 Extra to item nos. from 154030 and 154040 for disposal of muck for TRM 4.89
additional lift of 1 metre or part thereof beyond 3 metre lift in case of
disposal of muck from track in cutting.
94

154070 Removing the ballast from shoulders, left over after BCM working, TRM 17.54
screening the same removing the muck and putting back the
screened ballast into track, boxing the ballast to profile and using
released muck for cess making or throwing away within 50m lead and
3m lift when not required for cess repairs and as directed by the
Engineer-in-charge.
Note: This item shall be used only when BRM is not available.
154080 Ballast equalisation & ballast profiling after completion of deep TRM 31.43
screening work by BCM and/or after unloading of ballast by DMT
(Ballast Train), as directed by Site Engineer as per IRPWM including
heaping of ballast in tamping zone keeping rails & sleeper top free
from ballast, spacing and squaring of sleeper, gauging, cleaning of
muck, proper fixing of fastening, attention during each round of
sleeper tamping in relation to pre & post working
Note:
Payment shall be made only once in irrespective of numbers of TTRM
packing round and after restoration of normal speed and restoration
of complete ballast profile and cess profile.
154090 Making cess in deep screened track by using screened muck TRM 28.12
discharged by BCM where cess is low or cutting cess to required
depth up to 4m from centre of track, where cess is high and disposing
off extra muck beyond 5m from edge of cutting which are up to 3m
deep or alternatively carting it up to 50m for disposing it off beyond
cutting or platforms, so as to make cess as per standard profile
including providing proper slope.
154100 Carrying out Through packing of sleepers to make track fit for 30 KM TRM 72.29
speed as per procedure stipulated in latest version of IRPWM, behind
BCM including filling ballast when only lifting is carried out by BCM.
154110 Pulling the left over ballast to the shoulders and dumping excess TRM 26.29
ballast in the cribs and shoulders including boxing/profiling as per
IRPWM of track together with left over stretches at fixed
structures/masts immediately after FRM work, leveling the muck for
making up cess and side slopes including removing and re-fixing of
traction bonds during line block with all contractors labour, tools,
plant, all lead, lift, crossing of track etc. complete and as directed by
the Engineer-in-charge.
95

154120 Pre, during, and post BCM works for deep screening of ballast in TRM 356.21
Points and crossings with all contractor's labour, tools and plants as
required to carry out the work to the standards in specific time
including crossing of tracks etc. complete and as directed by the
Engineer - in - charge.
I. Pre-BCM Operation : a) making trenches for insertion of cutter bars
at various locations as per the directions of engineer in charge. i.e..,
one trench ahead of one rail length from SRJ and second trench near
sleeper No 62 ( 1in 12) etc., b) Filling up ballast up to sleeper level.
c) Tightening of fittings/ plate screws, ERCs, Stud bolts, check rail
bolts.
II. During BCM Operation : a) Assistance to S&T Department :
Opening of cables at approach of Points & Crossings, TLD Boxes/
removing of Point motor and refixing the same and covering cables
after passing of BCM in block period with S&T Staff. b) Engineering :
c) Removing of two long sleepers i.e.., sleeper No 3 & 4 and refixing
the same in position during block after passage of BCM. d) Removing
obstruction i.e.., S&T CC block duly digging with crow bars and
breaking with chisel/ hammer, cutting of rail pegs with gas. e) To
remove, excess ballast on rail table for free movement of BCM and
for packing purpose. f) Extension of cutter bar wherever required in
assisting machine staff. g) Removing of cutter bar/ Chain links from
the trenches after screening work by BCM.
III . Post BCM Operation : a) Packing switch portion including Motor

long sleeper i.e.., SRJ to heel joint to reset Point for train movement &
initial packing of lead portion to allow train at 20KMPH and lifting the
track in two stages (50mm to 75mm in each lift) wherever required for
correcting the longitudinal surfacing b) Dumping of ballast in the
deficient portion in crib, on main line turnout side for initial packing
purpose. c) Boxing / Levelling of muck duly ensuring levelling of muck
on cess side and lowering of cess to the deep screened depth and
removing of muck in between the lines and leading up to 250mts.
Note:
1. For technical reasons, some of the points and crossings cannot be
deep screened either fully or partially by BCM, in which case, the left
over length will be deep screening manually.
2. The length of points and crossings assembly for payment of this
item should be taken from SRJ to longest concrete sleeper available
just beyond heel of crossing along main line..
155000 CSM, Duomatic and 3X Sleeper Tamping Machines
96

155010 Carrying out pre-tamping, during tamping and post-tamping work for
tamping track with all types of rails, sleepers & sleeper density by
various Track Tamping machines, like CSM,DUO/3X Machines which
include :
(1) Re-adjustment of ballast, heaping-up of ballast, filling-up of
cavities in tamping zone by picking ballast from stacks / shoulders /
crib of adjoining track up to lead of 50 m to ensure effective packing;
(2) Clearing of ballast on sleepers to make them visible to operator,
(3) Clearing of ballast over rail foot to facilitate holding of rail by rollers
of TTRM;
(4) Digging, screening and replenishment of ballast at mud pumping /
rounded ballast in sleeper crib location;
(5) Tightening of loose fittings immediately before & after tamping;
(6) Replacement of broken / missing fittings supplied by Railway;
(7) Correcting displaced sleepers to position along with squaring;
(8) Re-setting of worked-out / fallen fittings;
(9) Removing and re-fixing joggled fish plates & wooden blocks,
wherever necessary;
(10) Manual consolidation of ballast in crib / shoulders;
(11) Removing and refixing of traction bonds during the block in
electrified sections
(12) Dressing of ballast
Note:
1. Tamping blocks are not identical & it may be given at any time
either during day or night.
2. Stages of payment a) 30% of the rate will be paid on completion of
pre tamping attention, b) Balance 70% of the rate will be paid on
completion of post tamping.
3. Recovery at the rate of twice the above applicable rate will be
effected in case contractor fails to carry out pre/during/post operation.
4.Payment shall be made only once in irrespective of numbers of
TTRM packing round and after restoration of normal speed and
restoration of complete ballast profile.
155011 For day time block working TRM 16.20

155012 For night time block working TRM 18.15
155013 New Line Section, not opened for traffic TRM 8.88
97

155020 Pre, during & post tamping operations, for tamping of track on level
crossing portion on all types of track structure and density, during
traffic block, duly opening the road surface by digging up to the
required width and up to 50mm below bottom of sleeper to facilitate
tamping, removing and refilling ballast, adjustment of deficient ballast
if necessary by picking from adjoining track/shoulder/cribs, removing
and refixing all inter locking gears interfering, removing and re-fixing
of check rails and painting of running rail & check rail with coal tar
emulsion, completing road surface to smooth motorable condition
after tamping is over, including tightening of loose fittings,
replacement of broken/missing fittings, correction of displaced
sleepers to correct position and as directed by Engineer in charge.
155021 Level crossing with asphalted surface Sqm 322.85

155022 Level crossing with CC block surface Sqm 279.00
155023 Level crossing with Moorum/earth surface Sqm 220.53
155030 Removing and refixing of guard Rails over slab bridges during TRM 89.80
machine packing with all contractor's men and materials duly
removing fittings, leading guard rails to bridge approaches, lifting,
dragging, positioning and crossing of track etc, and as directed by
Engineer In charge.
98

156000 Unimat Machine Related Works
156010 Carrying out pre-tamping, during tamping and post-tamping works for
tamping of Turnouts of all types Under Traffic Block Conditions which
include :(1) Re-adjustment of ballast, heaping-up of ballast, filling-up
of cavities in tamping zone by picking ballast from stacks / shoulders /
crib of adjoining track up to lead of 50 m to ensure effective packing;
(2) Clearing of ballast on sleepers to make them visible to operator;
(3) Clearing of ballast over rail foot to facilitate holding of rail by rollers
of UNIMAT; (4) Digging, screening and replenishment of ballast at
mud pumping / rounded ballast in sleeper crib location; (5) Tightening
of loose fittings including check rails immediately before & after
tamping; (6) Replacement of broken / missing fittings supplied by
Railway; (7) Correcting displaced sleepers to position along with
squaring; (8) Re-setting worked-out / fallen fittings; (9) Removing and
re-fixing joggled fish plates & wooden blocks, OHE bonds & other
obstructions, wherever necessary ;(10) Removing and re-fixing
stretcher bar, as directed; (11) Adjustment in opening and housing of
switch for testing operation of points (12)Manual consolidation of
ballast in cribs and shoulders; (13) Stages of payment a) 30% of the
rate will be paid on completion of pre tamping attention, b) Balance
70% of the rate will be paid on completion of post tamping; (14)
Recovery at the rate of twice the applicable rate will be effected in
case contractor fails to carry out any of the pre/during/post operation.
156011 1 in 8½ Turnouts (Under Traffic Block Conditions) Set 7,949.56

156012 1 in 12 Turnouts (Under Traffic Block Conditions) Set 9,250.57
156015 Derailing Switch (Under Traffic Block Conditions) Set 2,930.22
156020 Extra Over Item Numbers 156011 to 156015 for night block working
156021 Extra to Item no. 156011 for night block working Set 1,192.43
156025 Extra to Item no. 156015 for night block working Set 439.53
156030 Carrying out pre-tamping, during tamping and post-tamping works
prescribed in current version IRTMM/IRPWM for tamping of Turnouts
of all types Under Conditions not requiring Traffic Block.
156031 1 in 8½ Turnouts Set 4,769.73

156032 1 in 12 Turnouts Set 5,550.34
156033 1 in 16 Turnouts Set 7,215.31
156034 1 in 20 Turnouts Set 7,610.03
99

157010 Carrying out various miscellaneous works, for proper upkeep of crew Shift 1,182.74
rest van / rest room as directed by machine in-charge of Track
Machines by providing a team of 2 labours for 12 hours shift, broadly
mentioned hereunder:
(1) Bringing water from nearby source and cleaning machine with
water jet or any suitable means;
(2) Fuelling machine duly bringing diesel / hydraulic oil from the
stacked drums;
(3) Bringing water to staff rest van or staff rest room, cleaning rest van
/ rest room, cooking food for Track Machine staff or bringing food
from outside (cost of food shall be borne by the staff concerned).;
(4) Guarding & watching machines, spare parts, oils, grease etc.
during day and night time at all locations, wherever necessary, as
instructed by the machine in-charge;
(5) In case, contractor provides less no. of Labour/Mate, payment will
be deducted for each such person @ 75% of the accepted item rate.
157020 Carrying out ancillary works required for UTV working under line block Shift 1,944.16
i.e., turning of rails/ Sleepers and keeping in position for fixing of UTV
clamps to rail, keeping rails/PSC Sleepers in position while loading
into BFR, removal of clamps on BFR for releasing loaded
rail/Sleepers, adjusting of rails/Sleepers on BFR etc. by providing
minimum of three men in a shift of 8 hours, with all contractor's tools,
all lead, lift, crossing of tracks etc., complete and as directed by the
engineer - in - charge.
Note: In case, contractor provides less no. of Labour, payment will be
deducted for each such person @ 2/3 rd of the accepted item rate.
157030 Providing lighting arrangements with halogen lamps on and around

machine during machine working in night time blocks, with
contractor's generator, consumables, all necessary electrical fittings,
operators etc.
Note:
1. Lighting arrangement is to be provided as per advance planning of
Night Blocks and written communication.
2. In case lighting arrangement is made available but not used due to
non-availability of block, payment @ 60% of the item rate shall be
made.
157031 3. In place of Halogen,
BCM/FRM/UNIMAT (7.5LED
KVAlamps of equal
generator andlumen capacity
12x500 W) may be Night 3,504.06
157032 CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 Night 3,289.99
W)
100
IR Unified Standard Schedule of Rates - 2021 Chapter -16: Small Track Machines
CHAPTER - 16 : Small Track Machines

161000 Rails
161010 Quick cutting with abrasive rail cutter of all types of rail sections
including wear resistant, head hardened rails up to 110 UTS, with
contractors tools & plants, equipment, consumable with all lead & lift
etc. complete as directed by Engineer in-charge. Abrasive Rail Cutter
will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012)
with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be
as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)
161011 60 Kg - 110/90 UTS - Outside Track Each 205.44

161012 52 Kg - 90 UTS - Outside Track Each 187.19
161013 52 Kg - 72 UTS & other rails - Outside Track Each 113.64
161014 60 Kg - 110/90 UTS - On Running Line Each 261.78
161015 52 Kg - 90 UTS- On Running Line Each 212.29
161020 Cutting of rails with Rail Cutting Machine (Saw type) in all types of rail
sections with contractor's tools & plants, equipment, consumable with
all lead & lift etc. complete, as directed by Engineer in-charge. Rail
Cutting Machine (Saw type) will be as per RDSO Specification No.
TM/SM/4, dated 24.04.1991.
Note: This item shall only be used in specific circumstances on
specific order of Engineer-in-Charge.
161024 52 Kg - 72 UTS & other rails - Outside Track Each 171.37
161030 Cutting of rails with electrically operated Rail Cutting Machine in all
types of rail sections, with contractor's tools & plants, equipment,
consumable with all lead & lift etc. complete, as directed by Engineer
in-charge as per Specifications. Machine to be fitted with monorail
wheel arrangement and a handle of convenient height to enable it to
be pushed over one rail by one person to take it to the work-site.
161031 Outside track - When Electricity provided by static power supply of Each 137.76
Railway :
161032 On Running track - When Electricity provided by static power supply Each 209.00
of Railway :
161040 Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine
including chamfering with appropriate chamfering tools in all types of
rail section with contractor's tools & plants, equipment, consumable
with all lead & lift etc. complete, as directed by Engineer in-charge.
Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3,
dated 24.04.1991.
161041 Outside Track Each 49.91

161042 On Running Line Each 64.02
101

161050 Drilling holes of specified size for bond holes with 7.2mm dia drill twist Each 33.71
to correct spacing and location on 60kg/52kg rails on cess or under
traffic block with contractor’s tools and plant, equipment, consumable,
labour etc complete as directed by the Engineer in charge at site.
161060 Bending & De-kinking with Hydraulic rail bender (Jim Crow) heavy
duty in all types of rail sections of flat bottom rails maximum up to
40mm with contractor's tools & plants, equipment, consumable with
all lead & lift etc. complete, as directed by Engineer in-charge.
Hydraulic Rail Bender (Jim Crow) Heavy duty will be as per RDSO
Specification No. TM/SM/5, dated 08.05.1991.
161061 Outside Track Each 76.03

161062 On Running Line Each 90.65
161070 Pulling of rail in LWR track by hydraulic rail tensor (Non-infringing Each 548.89
type) under traffic block for maintaining specified gap at rail joints for
A.T. welding with contractor's tools & plant, equipment, consumable
with all lead & lift etc. complete, as directed by Engineer in-charge.
Hydraulic Rail Tensor (Non-infringing type) will be as per RDSO's
162000 Sleepers
162010 Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Each 60.43
Sleeper Spacer with contractor's tools & plants, equipment,
consumable with all lead & lift etc. complete, as directed by Engineer
in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's
162020 Drilling of holes (vertically) of required size into concrete sleeper in- Each 102.00
situ for fixing guard rails and check rails on concrete sleeper track at
specified locations by concrete sleeper drilling machine with
contractor's tools & plants, equipment, consumable with all lead & lift
etc. complete, as directed by Engineer in-charge as per RDSO's
Specification.
162030 Loading / unloading of concrete sleepers from cess to BFR / BRH Each 22.22
wagons and vice-versa by jib crane attachable to BFR / BRH for
handling concrete sleepers with contractor's tools & plants,
equipment, consumable with all lead & lift etc. complete, as directed
162040 Quick removal of damaged concrete sleepers and restoration of Each 127.01
railway track in case of accidents / derailments and other such
emergent situations by Concrete Sleeper Breaker & angle grinder
with contractor's tools & plants, equipments, consumable etc. with all
lead & lift complete, as directed by Engineer in-charge.
163000 Fittings
163010 Measuring of Toe Load of ERC during service in field by Toe Load Each 3.61
Measuring Device (Mechanical) with contractor's tools & plants,
by Engineer in-charge. Toe Load Measuring Device (Mechanical) will
be as per RDSO's Specification No. TM/SM/14 (Rev. 01 of 2005 with
all updation).
102

163020 Measuring of Toe Load of ERC during service in field by Electronic Each 4.04
Toe Load Measuring Device with contractor's tools & plants,
by Engineer in-charge. Electronic Toe Load Measuring Device will be
as per RDSO's Specification No.TM/SM/ETLMD/218 dated
13.9.2012.
163030 Extraction of jammed ERC by Heavy Duty Hydraulic Extractor with Each 30.08
contractor's tools & plants, equipment, consumable with all lead & lift
etc. complete, as directed by Engineer in-charge. Heavy Duty
Hydraulic Extractor for jammed ERCs (10 Ton capacity) shall be used
as per RDSO's Specification No. TM/SM/6, dated 8.05.1991.
164010 Tamping of track for picking up slacks in concrete sleeper track by Each 64.98
Hand Held Off Track Tamper (Power Pack Version) with contractor's
tools & plants, equipment, consumable with all lead & lift etc.
complete, as directed by Engineer in-charge. Off-track tamper (Power
Pack Version) will be as per RDSO Specification No.
TM/SM/OTT/320, dated 28.01.2009.
103
IR Unified Standard Schedule of Rates - 2021 Chapter -17: Handling of Materials
CHAPTER - 17 : Handling of Materials

171000 Rails
171010 Loading of rails of any section and length up to 13 metres in
Wagons / Truck / trailer including lead up to 50 metres and lift up to 5
metres.
171011 In wagons during period of traffic block where handling by mechanical MT 242.44
means is not possible
171012 In wagons not involving traffic block or on lines not opened to traffic MT 138.30
but handling by mechanical means is not possible
171013 In Wagon under traffic block where mechanical handling is possible MT 142.81
171014 In Wagon where mechanical handling is possible and traffic block is MT 104.92
not required or in Truck/trailer.
171020 Loading of tongue rail, stock rail, switch assembly and crossings of
any section and length, SEJ, Glued joint etc. with / without P.Way
fittings and fastenings, in Wagon / Truck / trailer including lead up to
250 metre and lift up to 5 metre.
171022 In wagons not involving traffic block or on lines, not opened to traffic MT 198.56
but handling by mechanical means is not possible.
required.
not required or in Truck/trailer.
171030 Loading, leading and unloading of 52Kg / 60Kg rail up to 13 metre
length by Railway's Rail Dolly / Dip Lorry to the nominated location
under traffic with line protection in case road carriage is not possible
with different lead with a lift up to 5 metre during block period.
171031 For lead up to 500 metre. MT 327.34
171032 For lead beyond 500 metre and up to 1 Km. MT 421.75
171033 Extra to Items no. 171032 for lead beyond 1 Km for every subsequent MT 50.12
Km or part thereof and up to 10 Km
171034 Extra to Item no. 171031 and 171032 with contractor's Rail Dolly / Dip MT 11.44
Lorry
171040 Loading, unloading and hauling of 52Kg / 60Kg rail more than 13
metre and up to 39 metre length by Railway's Rail Dolly / Dip Lorry to
the nominated location under traffic and line protection in case road
carriage is not possible for different leads and lift up to 5 metre.
171041 For lead up to 500m MT 367.90

171042 For lead beyond 500 metre and up to 1 Km MT 535.11
171044 Extra to Item no. 171041 and 171042 with contractor's Rail Dolly / Dip MT 10.80
Lorry
104

171050 Unloading of rails of any section and length up to 13 metre, in neat
manner for Railway usage from departmental material train (DMT) or
contractor's / Railway's Truck/trailer including lead up to 50 metre, lift
up to 5 metre and stacking in prescribed manner.
171051 From wagons during period of traffic block where handling by MT 149.85
mechanical means is not possible
171052 From wagons not involving traffic block or on lines, not opened to MT 104.24
traffic but handling by mechanical means is not possible
171053 From Wagon where mechanical handling is possible and traffic MT 77.66
block is not required or in Truck / trailer.
171060 Unloading of rails of any section and length from 13 metre to 39
metre, in neat manner for Railway usage from departmental material
train (DMT) including lead up to 50 metre and lift up to 5 metre.
171061 During period of traffic block MT 156.76

171062 Not involving traffic block or in lines not opened to traffic MT 104.20
171070 Unloading of all type of rails of length 130 metre and beyond from end
unloading rake and keep the panels in head-up position at specified
distance from centre of track clear from any infringement..
Note: Contractor has to keep Oxygen and Acetylene gas with cutter
as standby during the period of work.
171071 During period of traffic block MT 25.28

171072 Not involving traffic block MT 21.18
172000 Sleepers
172010 Loading of 52kg / 60kg PSC normal line and special sleepers up to
2.75 metre length in Depot / Station / Mid-section between stations in
a neat manner to departmental material train (DMT) or contractor's /
Railway's Truck/Trailer with crane or any other means including
crossing of one track with free lead up to 250 metre and lift up to 5
metre, if required with contractor's labour, tools & plants, machinery,
consumables etc.
Note: In case of any damage to sleeper during loading, penalty @
50% of the all inclusive cost of sleeper shall be levied.
required.
not required or in Truck / trailer
172020 Loading of 52kg / 60kg PSC line and special sleepers beyond 2.75
metre length including existing fittings and fastenings in Depot /
Station / Mid-section between stations in a neat manner to
departmental material train (DMT) or contractor's / Railway's
Truck/trailer with crane or any other means including crossing of one
track with free lead up to 250 metre and lift up to 5 metre, if required
with contractor's labour, tools & plants, machinery, consumables etc.
105

required.
172024 In Wagon/Truck / trailer where mechanical handling is possible and MT 103.28
traffic block is not required.
172030 Loading, leading and unloading of PSC Sleepers of 52Kg / 60Kg by
Railway's Rail Dolly/ Dip Lorry to the nominated location under traffic
in case road carriage is not possible for different leads and lift up to 5
metres.
172031 For lead up to 500 metres MT 254.77
172032 For lead beyond 500 metre and up to 1 Km MT 377.13
172034 Extra to Item no. 172031 and 172032 with contractor's Rail Dolly/Dip MT 13.01
Lorry.
172040 Loading, leading and unloading of all types of P.Way fittings and all
other miscellaneous material except Rails, sleepers, switches,
crossings, SEJs and Glued Joints by road vehicles for different leads.
Note: Lead shall be the shortest motorable road length between the
points of loading and unloading.
172041 Lead up to 5 Km MT 147.28

172042 Lead beyond 5 Km and up to 10 km MT 188.44
172046 Lead beyond 50 Km and up to 100 Km MT 625.57
172048 Extra for every Km per MT beyond 150 Km over item no. 172047 MT Km 3.24
172050 Transportation of Rails, sleepers, switches, crossings, SEJs and
Glued Joints by road vehicles for different leads.
Note:
1. Lead shall be the shortest motorable road length between the
points of loading and unloading.
2. Loading and unloading shall be paid extra under relevant items.
172051 Lead up to 5 Km MT 49.84

172058 Extra for every Km per MT beyond 150 Km over item no. 172057 MT Km 3.24
106

172060 Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75
metre length in Depot / Station / Mid-section between stations in neat
contractor's / Railway's Truck/Trailer with crane or any other means
including crossing of one track and lead up to 250 metre & lift up to 5
metre with contractor's labour, tools & plants, machinery,
consumables etc.
172061 From DMT - During period of traffic block MT 141.58
172062 From DMT - Not involving traffic block or on lines, not opened to MT 100.63
172063 traffic
From Truck / Trailer MT 76.06
172070 Unloading of 52kg / 60kg PSC special sleepers beyond 2.75 metre
length in Depot / Station / Mid-section between stations in neat
contractor's / Railway's Truck/Trailer with crane or any other means
including crossing of one track and lead up to 50 metre & lift up to 5
metre with contractor's labour, tools & plants, machinery,
consumables etc.
172071 Note: In case
From DMT of anyperiod
- During damage to sleeper
of traffic blockduring loading, penalty @ MT 179.78
172072 From DMT - Not involving traffic block or on lines not opened to MT 114.55
172073 traffic
172080 Spreading of New / SH , normal or wider base PSC sleepers from
stack along track on either side for different leads with all lifts by any
means.
172081 For a lead up to 500m Each 59.03
172082 Extra to Item no. 172081 for additional lead of every 500m or part Each 39.54
thereof beyond 500 m
173010 Unloading of Switches / Crossings / SEJ Rails / Glued Joints of any
rail section and length with or without P.Way fittings & fastenings in
neat manner for Railway usage from departmental material train
(DMT) or contractor's / Railway's Truck/Trailer with lead up to 250
metre & lift up to 5 metres.
173011 From DMT - During period of traffic block MT 179.78
173012 From DMT - Not involving traffic block or on lines, not opened to MT 142.39
173013 traffic
173020 Unloading all types of P.Way fittings and fastenings for Railway MT 118.27
usage from Truck and stacking with lead up to 250 metre & lift up to
5 metre.
173030 Collection, segregation and stacking of various scattered P.Way
materials at nominated stacking location with serviceable and un-
serviceable ones separately within a lead up to 500 metre and lift up
to 5 metre including crossing of track(s) wherever necessary as
173031 Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. MT 325.22
173032 All type of PSC sleepers MT 355.12
173033 P.Way fittings of all types and other similar loose items MT 328.93
107

173040 Stacking of glued joints in single layer for electrical testing, in such a Each 55.36
manner that glued joints - (a) shall not touch ground, (b) shall not
touch one another, (c) shall not touch any rail or any metallic body, (d)
shall not be water-logged from any side and (e) end post shall not rest
on supports of glued joint
173050 Un Loading of stone boulders weighing not less than 35 kg each from Cum 151.45
Railway Wagons and stacking at specified locations with all
contractor's tools & plants, machinery, labour, lead and lift, crossing
of track wherever necessary etc., complete as directed by the
Engineer In charge.
108
IR Unified Standard Schedule of Rates - 2021 Chapter -18: Level Crossings
CHAPTER - 18 : Level Crossings

181000 Dismantling
181010 Opening of level crossing up to required width from centre line of Sqm 312.59
track for replacement of sleepers by digging of pucca road surface
up to bottom of sleeper, removing of ballast, muck etc., screening of
ballast & stacking the same near level crossing and disposing of all
debris, replacing the required sleeper duly packing the sleeper to
make fit for normal traffic and closing of LC surface with screened
ballast to original level by proper ramming and consolidation to
smooth motarable surface as directed by engineer in-charge.
181020 Dismantling existing check rail of Level Crossing, blocks, bolts & nuts RM 154.84
and stacking these in a countable manner near LC, free from any
infringements as directed by Engineer in-charge.
181030 Dismantling exiting Rail Height Gauge carefully and stacking the Each 3,107.36
released material in countable manner, free from any infringements
as directed by Engineer in-Charge including removal of cement
concrete foundation and making surface clean.
181040 Dismantling existing lifting barrier along with winch assembly and Set 16,380.37
other components like boom, fringes, locking arrangements, pedestal,
boom rest, locking rods/wires, pulley stakes, turn out wheels, 'A' base
and other materials connected with functioning of lifting barrier,
removing engineering indicators on track and level crossing road
signages without any damage including demolishing concrete base of
existing structures, filling, ramming and levelling the ground disturbed
during demolition, clearing debris and stacking all released material in
a neat and countable manner and clear of infringements, as directed.
Note: Barriers on both sides of level crossing constitute one set.
181050 Dismantling existing lifting barrier and other components except Set 15,204.32
winch assembly, like boom, fringes, locking arrangements, pedestal,
boom rest, locking rods/wires, pulley stakes, turn out wheels, 'A' base
and other materials connected with functioning of lifting barrier
without any damage including demolishing concrete base of existing
structures and clearing debris in a neat manner and stacking in a
countable manner and clear of infringements, as directed.
Note: Barriers on both sides of level crossing constitute one set.
181060 Deduction to item no. 181050 for not dismantling ‘A’ base and its Set -2,325.34
foundations
181070 Dismantling existing swing gate consisting of two leaves with gate MT 1,478.42
posts, meeting post and stopper post etc. without causing any
damage to material and stacking the same near LC gate as directed
109

182000 Overhauling of Level Crossings
182010 Overhauling of level crossing by digging out up to 50mm below
sleeper, screening of shoulder & crib ballast, replacing unserviceable
sleepers & fastenings as necessary, removal of check rails for
examination of running rails and check rails, scrapping of rails and
painting running rails and check rails and all fixtures with two coats of
coal tar emulsion, greasing of ERCs, MCI inserts and liners oiling all
the bolts, correcting cross level, gauge, alignment, surfacing and
packing etc., re-fixing check rails duly ensuring standard clearances,
re-inserting screened ballast, making good deficient ballast with
Railway's ballast from stacks / heaps/borrowing from adjacent length
of adjoining track within 50m lead, ramming & levelling road surface
and refixing concrete slabs/making motarable road surface as
required excluding re surfacing with bitumen as directed by Engineer
in-charge.
182011 Level crossings with asphalted road surface Sqm 485.34

182012 Level crossings with concrete blocks road surface Sqm 441.15
182013 Level crossings with any other type of road surface Sqm 396.97
183000 Check Rail Related Works
183010 Drilling of parabolic shaped holes to the web of check rail as per Each 132.46
drawings & specifications and as directed by engineer in- charge.
183020 Fabrication including cutting, bending/machining and fixing of check TRM 933.05
rails of all rail sections over PSC Sleepers as per Railway’s approved
drawings & specifications for level crossings / trolley paths/inspection
lines in yards duly cutting rail flanges, wherever required to correct
alignment and level, drilling of holes with machine in check rails and
fixing to Running rail and sleepers with all Railway's fittings, e.g. rail
screws / grip expansion bolts, brackets, packing pieces, bolts,
washers etc including grinding of brackets if required, fixing of
Railway's wooden blocks at flare ends duly cutting and plaining,
crossing of tracks and as directed by the engineer in-charge
Note:
1. Drilling of holes in PSC Sleeper and fixing of dowels shall be paid
2. Required P.Way materials will be supplied at SSE/P.Way stores.
183030 Cutting foot of rail by gas or any other approved method for check RM 132.25
rails and grinding sharp edges into smooth profile. Payment shall be
made for length of cutting of foot.
183040 Fixing check rails to running rails on level crossings with MS brackets, Set 4,283.41
184000 MS packing
Painting plates, bolts & nuts, spring washers etc. including
Works
110

184010 Painting of running rails and check rails of any rail section of level RM 40.94
crossing with anti-corrosive paint on both sides of web, foot etc.
including liner contact area (excluding bottom of foot) and fishing
plane with two coats of thickness of 100 microns each by bituminous
black paint confirms to IS-9862 of reputed make including painting of
liners, ERC surface preparation, i.e. cleaning with wire brush / sand
paper as a complete job as per Para No 613 (2)(b)(iii) of Indian
Railways Permanent Way Manual, as directed by Engineer in-
Charge.
184020 Painting speed breakers with paint of approved quality & colour over
the Bituminous/ Concrete surface near approaches to level crossing.
184021 With enamel paint (two coats) Sqm 108.77

184022 With luminous paint (two coats) Sqm 143.40
184023 With Hot melt thermoplastic road marking paint Sqm 117.82
185000 Fencing and Gate Boom Related Works
185010 Dismantling of existing rail fencing, fixed adjoining running lines of MT 1,182.48
track, duly excavating and levelling the foundation by hand
compaction, removing connections and carting the released material
up to a lead of 250m by suitable means and stacking the same, as
Note: The released materials shall be handed over duly stacking the
same in measurable fashion.
185020 Dismantling existing whistle boards along with post including Each 157.74
demolishing base concrete and levelling of ground, stacking released
materials at the level crossing concerned including clearing of debris,
with contractor's labour, tools, vehicles, consumables, all lead and lift
etc., complete without damage as directed by the Engineer-in-charge.
185030 Providing Rail Height Gauge at approaches of level crossings as per

approved drawings in cement concrete foundation using Railway's
rails of all sections including cutting, bending, drilling holes, erecting
in position with clamps, bolts & nuts including painting with one coat
of enamel paint of specified colour over one coat of primer.
Note: excavation and concrete work will be paid separately.
185031 Less than 5 metre width of level crossing Each 8,777.54

185032 Above 5 metre width of level crossing Each 10,338.24
185040 Manufacture, supply, assembly, erection, commissioning and testing
of Lifting Barrier assembly, having fragmented boom, boom light
boxes with suitable gate lamps, bell, boom supports (stay wires) with
adjusters, counter weight, pedestal and lock posts with foundation of
‘A’ type as required, turn-union wheel with brackets, balance and
auxiliary weights clamps etc. to approved standard drawing with all
fittings and fastenings excluding fringes, complete with contractor's
men, equipments and materials, as per specifications and as
directed.
185041 Up to 6m long Lifting Barrier Set 132,982.43

185042 Above 6m and up to 8m long Lifting Barrier Set 177,004.43
111

185043 Above 8m and up to 10m long Lifting Barrier Set 220,202.19
185050 Manufacture, supply, assembly, erection, commissioning and testing Each 49,922.33
of Winch Arrangement for operation of level crossing lifting barriers,
as per RDSO’s approved layout, having standard covering
arrangement, foundation of ‘A’ type as required and pulleys, pulley
guides & stakes, horizontal rope wheel, vertical rope wheel, wire
adjusting screws, wire ropes 6 x 6 x 19 with all fittings, fixtures &
accessories to RDSO’s approved drawings with all parts including
painting of steel work as per specification, as directed with cement
concreting complete.
Note: Excavation and concrete work will be paid separately.
185060 Manufacture, supply, assembly, erection, commissioning and testing

of auto boom locking arrangement for existing lifting barriers,
consisting of interlocking ground frame near gate lodge, foundation of
‘A’ type, as required and connecting ground frame to lock posts of
gate booms with stipulated rodding on guide rollers, supported on
trestles including required excavation, foundation, providing RCC NP-
2 Class pipes of 100mm dia. for road / rail crossing, as per RDSO’s
drawings complete (Excavation, concrete work and NP-2 pipe will be
paid separately).
185061 Single lever Each 113,048.37

185062 Double lever Each 117,251.39
185070 Manufacture, supply and replacement of one side of level crossing of
existing Railway's lifting barrier assembly and boom supports of
different boom length including required excavation & concreting
foundation of ‘A’ type, as required for pedestal bases & fixing it on
boom supports, painting iron works with two coats of synthetic enamel
paint over one coat of primer of approved quality & colour and setting
lifting barrier for smooth operation complete and as directed.
Note: Excavation & concrete work will be paid separately.
185071 Up to 6m long Lifting Barrier Each 66,491.21
185072 Above 6m and up to 8m long Lifting Barrier Each 88,502.22
185073 Above 8m and up to 10m long Lifting Barrier Each 110,101.09
185080 Manufacture, supply and replacement of gate lamps at one side of Each 5,425.34
level crossing
186010 Manufacturing, supplying and laying factory made CC block pavers
for road surface of level crossings to RDSO Drg. No. M.00003,
manufactured using 20mm size graded hard stone aggregates of
approved quality over a well compacted sand bedding 50 thick with all
contractor's cement, labour, tools/plant and curing with all lead & lift
as per specifications and as directed by Engineer in-charge.
186011 80mm thick blocks of M-35 grade for medium traffic. Sqm 989.71
186012 120mm thick blocks of M-40 grade for heavy traffic. Sqm 1,423.57
186020 Fixing of Railway’s existing precast concrete slabs of different sizes in Sqm 76.79
position for level crossings / trolley path and filling gap between check
rail / running rail, slabs, approaches etc. with asphalt complete and as
directed.
112

186030 Paving of level crossing road surface with Railway's precast RCC Sqm 202.74
slab / blocks as per standards / approved drawings for light and heavy
vehicles on bed of sand, moorum or gravel, duly compacted and
joints filled with mixture of sand & tar/bitumen in proportion of 1:2 by
weight.
186040 Removal of RCC slab in existing level crossing portion and in Sqm 44.19
between tracks along with stacking them in countable manner, as
directed.
186050 Fixing of speed breaker on approaches of level crossings with pre- RM 344.56
cast concrete blocks (M-25) of parabolic shape for entire road width
with 125 mm central rise including painting two coats with paint of
approved quality and colour in the width of 2 metres.
Note: Cost of pre-cast concrete blocks shall be paid separately.
186060 Provision of one Asphalt Speed Breaker Rumble Strip on each side of RM 678.65
the approaches of manned level crossings as per approved drawing
including painting two coats with paint of approved quality and colour.
186070 Manufacture & supply of tested GI wire rope of 6mm dia. and 6 ply to Kg 468.28
suit lifting barrier gates at nearby P.Way Stores / Depot / Level
Crossing gate, as directed.
186080 Supplying and fixing of Boom Supports (stay wires) for lifting barrier Each 1,718.92
(approx. 8mm dia.) with suitable adjuster and other specials, as
directed
186090 Manufacture and supply of vertical / horizontal Turnout Wheels and Each 1,766.08
Shafts, mounted over base plate weighing not less than 6 Kg with
supporting vertical base, made of MS angle 75mm x 75mm x 10mm
as per Railway's approved drawings and specifications complete and
as directed.
186100 Manufacturing, supplying and installation of pulley with pulley stakes Each 616.66
complete, wire rope 6 x 6 x 19 with accessories as per Railway’s
approved drawings for operation of lifting barriers complete, as
directed.
186110 Fabrication, supply and fixing of Collapsible Fringes to the lifting RM 898.70
barriers of various length at level crossing as per approved drawing;
made of MS flat of size 30mm x 6mm in 2 rows, 40mm x 6mm in 1
row horizontally and MS flat of size 30mm x 6mm vertically at 500mm
centre to centre, painting iron works with two coats of synthetic
enamel paint of approved quality & colour over one coat of primer of
approved quality, as directed.
186120 Supplying and driving into ground 'C' class G.I. pipes of 20mm dia. x Set 458.31
150mm length for planting red flags and lamp at 5 metre on both
sides from the centre of road at level crossings with all leads & lifts.
Payment shall be made for complete work at one Level Crossing.
Note: Two pipes make one set.
186130 Manufacturing, supplying and installation of Turnout wheel - Each 2,784.18

Horizontal Rope Wheel - double wire (2-way) including guides with all
contractor's materials, fabrication, labour, T&P, consumables, all
leads & lifts etc. complete as per approved drawing and as directed
113

186140 Supplying galvanized Steel Wire Rope for DW signaling 6 x 19 ply as Kg 334.48
per IRS No. S.11 amended up to date for lifting barrier at level
crossing gates, as directed by Engineer in-charge
186150 Fabrication, supplying and fixing Stop Boards of 600mm dia. to lifting Each 4,136.57
barriers as per approved drawing, made of 3mm thick plate, using MS
clamps, providing 6 nos. of 50mm dia. red retro-reflector on stop
board, painting iron works with two coats of synthetic enamel paint
over one coat of primer of approved quality & colour and writing
STOP mark over the board.
186160 Manufacturing, supplying and fixing Wicked Gate of size 1025mm x MT 99,266.05
1025mm x 1000mm at manned level crossings, as per approved
drawing including painting with 2 coats of specified enamel colour
paint over 1 coat of primer including earthwork in excavation etc.
complete, as per specifications and as directed.
186170 Fixing of wooden blocks of approximate size of 150mm x 300mm x
1200mm on end of check rails including sizing at level crossings with
contractor's labour, tools & plants and as directed.
186171 With Railway’s wooden block by cutting Railway’s wooden sleepers Each 243.34
(supplied free by Railways) into blocks by sawing to size
186172 With Contractor’s hard wood block Each 2,734.11

186180 Fixing of grip expansion bolts of 18mm / 22mm dia. with nuts and MS Each 116.65
clips / washers on PSC sleepers as per specifications for fixing guard
rails / check rails / trolley path including drilling of required holes in
sleepers with all fittings with contractor's tools & plants, equipment,
consumables with all lead, lifts etc. complete, as directed by Engineer
in-charge, excluding cost of bolts, nuts, washers, clips etc.
186190 Erecting detonator rail posts at required locations as required Each 372.35
including cutting the rail to required length varying from 1.00M to
1.50M , leading the rail pieces from nominated station / mid section
from nearest depot to site of work, erecting the rail post by making the
pit size as required and filling with CC 1:3:6 mix with 40mm
aggregates and painting the rail post with two coats of synthetic
enamel paint of approved colour and make, marking of detonator
symbol as per site requirement, with contractor's materials, labour,
paint, all lead and lifts, etc., complete as per specifications and as
directed by the Engineer-in-charge.
Note: Excavation and concrete work for foundation will be paid under
relevant item.
114

186200 Erecting Emergency Chain Posts for level crossings , including Each 453.76
cutting rail to required length varying from 1.00M to 1.50M , drilling
holes, providing hooks & links / rings with necessary locking
arrangements to fix emergency chain, leading the rail pieces from
nominated station / mid section from nearest depot to site of work,
erecting the rail post by making the pit of size as required and filling
with CC 1:3:6 mix with 40mm aggregates and painting the rail post
with two coats of synthetic enamel paint of approved colour and
make, with contractor's materials, labour, paint, all lead and lifts, etc.,
complete as per specifications and as directed by the Engineer-in-
charge.
Note:
(1) Rails & chain will be supplied by Railways.
(2) Excavation and concrete work for foundation will be paid under
relevant item.
186210 Providing Rail Barricading with rails supplied by Railways with MT 1,363.63
verticals provided at every 1.5m interval, height of barricade being up
to 1.5m above ground / termination level and one or more row of
horizontal rail, duly cutting rails and drilling holes as required,
assembling necessary accessories to required length, including
earthwork excavation for foundation, fixing posts in cement concrete
1:3:6 base of size 0.45m x 0.45m x 0.60m and one coat of red oxide
painting of steel work.
Note:
1. Excavation and concrete work will be paid separately.
2. Rail shall be made available within 250 metres
115
IR Unified Standard Schedule of Rates - 2021 Chapter -19: Bridge Related Activities
CHAPTER - 19 : Bridge Related Activities

191010 Dismantling existing track on girder bridges including guard rails and
foot path etc., cutting existing SW panels / LWR, if required into free
rails of not less than 12 metre length and leading all released
materials to nominated place within 50m of bridge approaches and
stacking the released materials clear of infringements, as per
direction of Engineer-in-Charge.
Note: Rail cutting and drilling shall be paid separately.
191011 Under Traffic Block Conditions TRM 371.10

191012 Under Conditions not requiring Traffic Block. TRM 306.66
191020 Insertion of temporary girder in place of formation involving
dismantling of track, removal of ballast and neatly stacking for future
use, excavation & installation of CC crib or wooden crib at both ends
as per approved design in one or more traffic blocks, excavation for
creating space for insertion of girder as required, placement of girder
by contractor’s Crane, tools & plants, filling of earth/sand filled bags
at different stages as required, linking of track and connecting with
the approaches, ballasting, boxing and packing approach sleepers to
make track fit for 20 kmph to the satisfaction of Engineer in-charge.
Note:
1. The CC Cribs as required and Temporary Girder shall be supplied
by Railways at available location.
2. Transportation of Temporary Girder to site shall be paid separately
3. The charges for wooden sleepers/blocks required for matting and
bearing as per approved design shall be paid extra as per relevant
item.
4. In case bridge timber / channel sleepers are required to be laid on
girder, the same shall be paid separately under relevant item.
191021 RH /Temporary girder of length varying from 12.2m to 16.3m using Each 77,253.96
road crane capacity of 50 MT
191022 RH /Temporary girder of length above 16.3m and up to 26.00 using Each 113,480.43
Road crane capacity of 80 MT
191030 Manufacturing and using wooden sleepers/blocks required for matting Cum 1,690.05
and bearing as per approved design for use below and above CC
Crib for insertion of Temporary Girder etc..
Note: The item is for one time use and released wooden
sleepers/blocks shall be the property of the Contractor.
191040 Removal of temporary girder, crib on both ends and placing

temporary
191041 RH girder girder
/Temporary on cribof/ cess away
length from from
varying Railway tracktoas
12.2m directed
16.3m using Each 82,873.30
road crane capacity of 50 MT
191042 RH /Temporary girder of length above 16.3m and up to 26.00 using Each 124,639.03
Road crane capacity of 80 MT
192000 Linking of Track over Girders
192010 Removing existing Channel/H-Beam sleepers with fittings from the Each 237.41
running track under traffic block for TBTR & stacking the same
neatly at specified places with contractor’s tools & labour, as directed
116

192020 Extra to item no. 192010 for Track Circuited area including handling Each 14.70
of released PVC washers on bolts and extra rubber pads on sleepers
192030 Inserting in track Steel Channel/H-beam sleepers with all Railway Each 276.74
supplied fittings complete for TBTR work to specified gauge under
traffic block with contractor’s tools including aligning, levelling to
make track fit for 20 kmph speed and as directed by Engineer in-
charge.
Note: Transportation of track material if supplied beyond 250m of
bridge approaches, shall be paid separately under relevant item.
192040 Extra to item no. 192030 for Track Circuited area including handling Each 28.08
of released PVC washers on bolts and extra rubber pads on sleepers.
192050 Complete Track Renewal on Bridge with Steel Channel/H-beam TRM 984.36
sleepers as per approved drawings including leading of running and
guard rails, sleepers and fittings, bending of guard rails, drilling of
holes, cutting of rails etc. and leading the released rails, sleepers &
fittings near bridge approaches under traffic block as directed and
making track structure fit for normal speed.
Note:
1) Rails, Steel Channel/H-beam sleeper and all fittings will be
supplied by Railways.
2)Transportation of track material if supplied beyond 250m of bridge
approaches, shall be paid separately under relevant item.
193000 Casual Renewals Works

193010 Renewal of existing cracked /broken/corroded isolated Steel
Channel/H-beam sleepers with Railway supplied steel channel
sleeper with its fittings during traffic block by removing the guard rail
and foot path plates with its fittings and loosening of adjacent
sleepers hook bolts and lifting of track to required height for removal
of old sleeper and insertion of new steel channel sleeper with all
fixtures including fixing GR/ER pad in position with epoxy adhesive to
neat gauge without disturbing alignment of the track as a whole using
with contractors own non infringing jacks and labour, consumables,
wooden packings and refixng back in position guard rails and foot
path plates along with fittings and tightening of loosened hook bolts
etc as a complete job as directed by Engineer in charge at site. The
rate includes trucking of new steel channel sleepers and its fittings
from bridge approaches and trucking back released steel channels
and its fittings to bridge approaches/ nominated locations.
193011 Broad Gauge Track Each 926.98

193020 Renewal of existing running rail and guard rails of all sections on TRM 636.95
bridge portion over Steel Channel sleepers/PSC sleepers under traffic
block including leading of new rails, fittings, refixing all the fastenings
as per approved drawings including cutting of rails, drilling of holes to
running and guard rails as required as per drawing and leading back
the released rails and fittings and stacking at nominated place clear of
infringements with all leads & lifts tools and consumables complete
and as directed.
117

193030 Scattered renewal or replacement of missing / worn-out fittings of
channel sleeper on Bridge with Railway's fittings including leading to
required location for the work and the released fittings shall be
collected and neatly stacked as directed by Engineer in charge.
193031 Involving Rubber Pad Each 50.12
193032 Not involving Rubber Pad Each 27.65
194000 Guard Rails related Works
194010 Manufacture of flared portion of Guard Rail by cutting and bending to Set 3,470.61
required shape & RDSO’s approved drawings.
Note:
(1) Rails shall be supplied by Railways.
(2) One set consists of two rails i.e. both left and right.
194020 Providing and fixing of flared portion of guard rails of any rail section Set 3,147.50
over PSC sleepers including fixing of with all fittings, including
leading of rails and fittings, squaring and adjusting spacing of
sleepers as required, providing nose blocks duly cutting wooden
blocks supplied by railways and fixing it with bolts of 16mm dia as
directed complete and finished as per RDSO’s approved drawing.
Note:
1.One set consists of LH & RH side rails of one end.
2.Required P.Way fittings will be supplied at SSE stores depot.
194030 Drilling holes 25mm to 40mm dia. with drill twist in the foot of guard Each 64.13
rails for fixing guard rails on bridge as directed.
194040 Drilling of 25mm to 40mm dia. holes in PSC sleepers with suitable Each 252.94
rotary hammer / drilling machine at indicated location for fixing of
guard rails on bridges & its approaches as per approved drawing and
fixing of contractor's HDPE dowels and adhesive of approved quality
to Drawing no. RDSO/T-3002, procured from RDSO's approved
sources with contractor’s materials and consumable.
194050 Renewal of existing guard rails of all rail sections on bridge portion TRM 195.54
over wooden/PSC/steel channel sleepers excluding flared ends duly
leading new guard rails including cutting of rails, drilling holes to the
guard rails as required and as per drawings, refixing with all
fastenings, and leading back the released rail, stacking at nominated
place clear of infringements with all leads & lifts complete and as
directed.
194060 Dismantling of existing flared portion of guard rails of any rail section Set 1,760.06
over PSC sleepers
195000 Miscellaneous duly removing rails & fastenings and leading and
195010 Fabrication & supply of Galvanized Steel Channel Sleepers made MT 125,274.96
from ISMC 150mm x 75mm / 175mm x 75mm / 200mm x 75mm
standard rolled section conforming to IS:2062 as per RDSO approved
drawing No 1636/R1/R2 with latest correction slips complete and as
directed by Engineer In charge.
Note: Cost of Steel fittings and GRSP shall be paid separately
195020 Fabrication & supply of Galvanized H-beam Sleepers made out of the MT 121,775.32
materials confirming to IS 2062 of standard Rolled sections as per
approved drawing Nos RDSO/B/1636/4/R,5&9 complete and as
directed by Engineer-in charge.
Note: Cost of steel fittings and GRSP shall be paid separately.
118

195030 Supply of 25mm thick new rubber pads of RDSO drawing no Each 253.64
B/1636/I/R2 from approved sources of RDSO and replacement with
old crushed rubber pads of 10mm thickness and fixing by approved
adhesive on steel channel sleepers on bridges complete, as directed
by Engineer In-charge.
195040 Supplying & fixing Gang pathway of MS /Stainless Steel chequered
plates between guard rails on un-ballasted deck bridge for gang
pathway, overlapping at regular intervals of 2m to 2.5m with bolts duly
drilling holes in chequered plate, as directed on new bridge or
replacement of existing gangway on old bridge including removal of
old chequered plates and stacking near approaches of bridge clear
from all infringement..
Note: Overlapping of chequered plates shall not fall in between
sleepers.
195041 MS chequered plates 6 to 8mm thick on new bridge Kg 106.19
195042 MS chequered plates 6 to 8mm thick including removal of existing Kg 110.66
chequered plates on Bridges
Note: Payment shall be made only as per weight of new Chequered
Plate fixed.
195043 Anti skid Stainless steel chequered plate of 409 M Grade as per Kg 211.38
Specification ASTM A240 SS and Pattern conforming to BIS 3502
with average thickness of 3.5 mm with bead height of 0.8 mm min
thick - on New Bridges
195044 Fixing Anti skid Stainless steel chequered plate of Grade 409 M and Kg 215.84
average thickness of 3.5 mm with bead height of 0.8 mm min thick
including removal of existing chequered plates on Bridges
Note: Payment shall be made only as pert weight of new Chequered
Plate fixed.
195050 Providing staging during traffic block to 3.6 m x 3.0 m x 3.0 m approx. Each 18,539.80
size using steel cribs and/or wooden sleepers as per RDSO’s
approved drawing, duly excavating earth in pit and driving rails /
sleepers vertically to form shoring and filling gap with sand bags etc.
complete, as directed.
Note:
(1) Steel CC cribs, rails and wooden sleepers will be supplied by
Railway.
(2) Dismantling and linking of track will be paid separately.
195060 Clearing waterway of major & minor bridges by removing weeds / Metre 182.09
shrubs / bushes, removing silt deposit, filling scours, if any up to 10
metre from centre of bridge on either side including disposing waste
and silt away from waterway.
Note: Rate is for a single line and per metre of bridge span.
119

195070 Fabrication, supplying and fixing 600mm x 450mm Bridge Board Each 3,114.85
made from 16 SWG MS Sheet duly welded or riveted to back support
of two 600mm long horizontal angles of size 25mm x 25mm x 3mm &
two numbers 2.5 metre long vertical support of MS Angle of size
50mm x 50mm x 5mm, welded / rivetted to board. Vertical supports
shall have split ends for proper fixing in ground. Vertical supports of
board shall be embedded in ground in M 20 Cement Concrete blocks
of size 300mm x 300mm x 300mm, complete job including painting &
writing of subject matter on bridge board, as directed by Engineer - In
charge
Note: Excavation & concrete work will be paid separately.
195080 Overhauling of track on ballasted deck slab bridge i.e. screening of TRM 266.58
crib ballast and shoulder ballast in between sleeper ends and ballast
retaining walls on both sides of the track without disturbing core under
the sleeper under traffic following all safety precautions and other
instructions prescribed by Engineer in-charge. Muck should be
disposed of away from bridge up to a maximum distance of 350 m
and lift up to 10m.
195090 Bending the inner and outer 52 Kg/60Kg/90R rails available at site Set 41,417.20
suitable for V portion along bulb of rerailing ramp as per RDSO Drg
No T-8259 drilling of holes and cutting to the required length and
shape all lead, lifts, labour, tools and plants machinery and all other
required materials for bending etc, and as directed by Engineer In
charge at site.
195100 Supplying providing and fixing country kali wood/hard wood (Non Cudm 47.11
teak) sleepers of various thickness and length as per the RDSO re
railing ramp Drg No T-8259 for fixing bent rails and MS plates
including cutting the wood in saw mills, transporting to site of work
with all leads and lifts, labour, tools and plant etc. as directed by
Engineer In-charge.
195110 Fixing of 60Kg/52 Kg/90R rails for Re railing ramp as per RDSO Drg Each 16,088.70
No T-8259 on bridge approaches on wooden/PSC sleepers including
fixing railways fishplates, bolts, nuts, MS bearing plates, screws,
check blocks of re-railing ramp etc, levelling after drilling of holes in
rails wherever necessary under block with contractor's labour, tools
and plants, machinery all etc, complete and as directed by Engineer
in charge at site.
195120 Tightening of steel channel sleeper fittings i.e. hook bolts, running Sleeper 40.65
rails bolts, guard rail bolts on girder bridges with contractor labour
tools, plants etc., including oiling, greasing of fittings complete and as
directed by engineer in charge.
Note: Before execution of work specific approval of ADEN to be
obtained by duly indicating the locations with specific reasons along
with date of last tightening done.
120
IR Unified Standard Schedule of Rates - 2021 Chapter -20: Supply of P. Way Materials
CHAPTER - 20 : Supply of P.Way Materials

201000 Bridge Related Fittings
201010 Manufacture and supply of Hook Bolt 28mm dia. & 320mm long as Kg 86.10
per RDSO Drg. no. BA-1636/I/R2 from RDSO approved sources
201020 Manufacture & supply of 10mm thick Grooved Rubber Pads as per Set 349.72
drg. No. RDSO/T-5199 & RDSO's Spec. no. IRS-T-47-2006 (Prov.)
from RDSO approved sources with all contractor's lead, lift, labour,
tools, plant and transportation etc. complete as instructed by Engineer
in-charge.
Note: One set constitutes two nos.
201030 Manufacture & supply of Elastomeric Pads 25mm / 30mm thick as per Set 402.71
RDSO drawing No. B/1636/I/R2 to suit Insulated steel channel
sleepers from RDSO approved sources with all contractor's material,
lead, lift, labour, tools, plant and transportation etc. complete and as
instructed by Engineer in-charge.
Note: One set constitutes two nos.
201040 Manufacture & supply of a set of 2 Nos of Elastomeric Pads 25mm / Set 2,185.74
30mm thick and 4 nos of Grooved rubber pads as per RDSO drawing
No. B/1636/5 alt 2 to suit Insulated H Beam sleepers from RDSO
approved sources with all contractor's material, lead, lift, labour, tools,
plant and transportation etc. complete as per approved drawings and
as instructed by Engineer in-charge.
Note: One Set consists of 2 nos. Elastomeric Pad 25mm/30mm and 4
nos. Grooved Rubber Pad.
201050 Manufacturing and supplying Galvanised MS Inner and Outer Clips Set 574.92
for Steel Channel Sleeper (RDSO Drg. No. T-6150 & T-6151) from
RDSO approved sources.
Note: One set constitutes two inner & two outer clips.
201060 Manufacture, supply & fixing of galvanised steel fittings of insulated Set 2,649.38
galvanised steel channel sleeper for 60 Kg running rails & 52 Kg
Guard Rail as per RDSO drawing no. RDSO/T-5155 to 5164 with up-
to-date correction slips and specifications from RDSO approved
sources with all contractor's lead, lift, labour, tools, plant,
transportation etc. complete and instructions of Engineer in-charge.
201070 Manufacture, supply & fixing of galvanised steel fittings of insulated Set 2,032.08
galvanised steel channel sleeper for 52Kg running rails & 52 Kg/90R
Guard Rail as per RDSO drawing no. RDSO/T-5197 to 5200 with up-
to-date correction slips and specifications from RDSO approved
sources with all contractor's lead, lift, labour, tools, plant,
transportation etc. complete and instructions of Engineer in-charge.
121

201080 Supplying of Zero toe load fixtures for H Beam sleepers of 52/60Kg Set 3,974.07
Rails procured from RDSO approved firms as per RDSO approved
drawing with up-to-date correction slips and specifications with all
contractor's lead, lift, labour, tools, plant, transportation etc. complete
as per instructions of Engineer in-charge.
Note: Complete fixture for 1 sleeper shall constitute 1 set.
202000 L-Xing Indicator Boards, Engineering Indicators, Curve Boards etc :

202010 Manufacturing, fabricating and supplying retro-reflective Level
Crossing Indicator boards, made of 2mm thick aluminium sheet or
3mm thick aluminium composite sheet, face to be fully covered with
high intensity encapsulated type heat activated retro-reflective
sheeting conforming to type-IV of ASTM-D4956-01 in yellow & black
or other colour combination including subject matter, message,
symbols, borders etc. as approved by Engineer In-charge or as per
IRPWM guidelines, pasted on substrate by an adhesive backing
which shall be activated by applying heat and pressure conforming to
class-2 of ASTM-D-4956-01 and fixing the same with suitable sized
aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S.
angle iron of size 25mm x 25mm x 3mm provided all along the edges
of board with theft resistant measures, back side of board shall be
with non-peelable weather-proof paint, consisting of one coat of zinc
chromate primer and two coats of epoxy paint. Vertical post shall
have black & white anti-corrosive paint or powder coating complete,
as directed.
202011 Bilingual Whistle Boards for level crossing of size 600mm x 600mm of Set 6,558.52
each board with back support frame welded to vertical post of MS T
section of size 75mm x 75mm x 6mm x 3950mm
202012 Speed Breaker / Rumble Strips Board of size 900 mm equilateral Set 5,991.81
triangular shape and 600mmx200mm boards with back support frame
welded to vertical post of MS T section of size
80mmx80mmx8mmx3650mm
202013 Un-manned Level Crossing Danger Stop Board of size Set 3,865.71
675mmx525mm with back support frame welded to vertical post of
MS angle of size 50mmx50mmx6mmx3650mm
202014 Manned Level Crossing Indicator Board of size 900 mm equilateral Set 5,516.91
triangular shape with back support frame welded to vertical post of
MS T section of size 80mmx80mmx8mmx3650mm
202015 Single Strip / Double Strip Level Crossing Road Warning Board of Set 6,325.46
size 900 mm equilateral triangular shape and 900x300 board with
back support frame welded to vertical post of MS T section of size
80mmx80mmx8mmx3650mm
122

202016 Manufacturing and supply of circular STOP Disc of 600mm dia for Each 3,485.66
fixing on emergency chains at level crossings as given in IRPWM
including providing Retro reflective sheet fully covered over board
confirming to type-IV of ASTM-D4956 in red back ground colour and
text "STOP" of white colour over back ground. The circular board
shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick MS
Sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20
cm c/c to back-support .Retro reflective sheet is to be pasted on
substrate by an adhesive backing which shall be activated by
applying heat and pressure conforming to class-2 of ASTM-D-4956-
01.A vertical holding stand of 1000 mm length x15mm thick to be
jointed to back side of board along with a hook for fixing emergency
chain as directed by Engineer In charge.
202020 Manufacturing, fabricating and supplying retro-reflective Engineering

Indicator boards, made of 2mm thick aluminium sheet or 3mm thick
aluminium composite sheet, face to be fully covered with high
intensity encapsulated type heat activated retro-reflective sheeting
conforming to type-IV of ASTM-D4956-01 in yellow & black or other
colour combination including subject matter, message, symbols,
borders etc. as approved by Engineer In-charge or as per IRPWM
guidelines, pasted on substrate by an adhesive backing which shall
be activated by applying heat and pressure conforming to class-2 of
ASTM-D-4956-01 and fixing the same with suitable sized aluminium
alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of
size 25mm x25mm x 3mmprovided all along the edges of board with
theft resistant measures back side of board shall be with non-
peelable weatherproof paint, consisting of one coat of zinc chromate
primer and two coats of epoxy paint. Vertical post shall have black &
white anti-corrosive paint or powder coating complete, as directed.
202021 Caution Indicator Board of size 1400mmx400mm with back support Each 5,456.57
frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of
3650 mm long
202022 Speed Indicator Board of equilateral triangular shape having each Each 4,675.76
side of 1000mm with back support frame fixed to vertical post of MS
angle of size 50mmx50mmx6mm of 3650 mm long
202023 Stop Indicator Board of size 1400mmx400mm with back support Each 5,456.57
frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of
3650 mm long
202024 Termination Indicator Board of Circular shape having diameter of Each 6,725.52
1000mm with back
202030 Manufacturing, supportand
supplying frame welded
fixing CurvetoIndicator
vertical post of MS
/ Point angle /
Indicator Each 990.07
SEJ Boards to be provided at various locations on formation, made
out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with
MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x
3mm MS angle, 1000mm long post split and bent 100mm at bottom
end with all lead & lift as per specification and including painting of
details with enamel paint, as directed by Engineer in-charge
(Earthwork & concreting will be paid separately)
123

203000 Small Track Machines
203010 Manufacture and supply of Drill Twist, made of High Speed Steel
(HSS) of various sizes of Addison / I.T. make or equivalent, as
directed by the Engineer in-charge.
203011 7.2 mm dia. Each 358.99
203012 16 mm dia. Each 2,161.23
203013 18 mm dia. Each 2,472.40
203014 26.5 mm dia. Each 3,778.42
203015 28.75 mm dia. Each 4,295.18
203016 31.75 mm dia. Each 5,743.73
204000 Welding Equipments
204010 Manufacture & supply of rail file approximate size 15" long for filing Each 596.11
AT welds from Railway approved firm
204020 Manufacture & supply of Welding Equipments, as directed by
Engineer in-charge.
204021 Welding Cable Copper (50mm2 ) Metre 145.72
204022 Pressure Regulator for Oxygen Multi-stage cylinder Each 1,920.80
204023 Pressure Regulator for Acetylene gas cylinder Each 1,920.80
204024 500amp Arc Welding Electrode Holder Each 112.60
204025 Gas Cutting Torch Blow Pipe Each 1,258.46
204026 Hand Gloves Leather (Left Hand & Right Hand) Set 331.17
204027 Hose Rubber for Oxygen 6mm dia. Metre 37.09
204028 Hose Rubber for Dissolved Acetylene (D.A.) 6mm dia. Metre 37.09
204029 Welding Screen (approximate size 4" x 3") Each 198.70
204030 Manufacture & supply of wire brush 25mm long, as directed by Each 19.87
Engineer in-charge.
204040 Supply of Used Lubricating Oil of approved quality Litre 19.87
124
IR Unified Standard Schedule of Rates - 2021 Chapter -21:Miscellaneous Items
CHAPTER - 21 : Miscellaneous Items

211000 Miscellaneous Items
211010 Painting and fixing MS Indicator Boards of curves, SEJs, Points &
Crossings, Gang/section jurisdiction and similar as per standard
design including excavation, refilling, concreting in foundation and
painting two coats with enamel and luminous paints as directed by
Engineer in-charge.
Note: Excavation, concrete work and lettering shall be paid
separately.
211011 Boards with single post Each 140.75
211012 Boards with two posts Each 150.79
211020 Erection or removal of temporary Engineering Indicator Board or any
other board at specified locations without causing infringement to
track etc. complete and as directed.
211021 For erection Each 218.02
211022 For removal Each 176.74
211030 Fabricating of check rails of 52Kg and 90R sections for providing to RM 167.35
curves by cutting web of rail horizontally by gas, grinding for
smoothening the cut edge and drilling of parabolic shaped holes to
the web of check rails as per drawing and specification and as per
directions of engineer in-charge with all contractor’s labour, tools and
materials complete.
Note:
1. Rails shall be supplied by Railways
2.The both ends of head of check rails are to bent/cut as per drawing.
3. The released rail scrap shall be stacked neatly with in a lead of
500m.
4.Drilling of holes shall be paid under relevant item.
211040 Dismantling Check Rail on curves on track of all rail sections, duly RM 54.22
removing fish plates and bolts including removing chairs from
sleepers, leading and stacking released materials away from track
clear of infringements, complete and as directed.
211050 Fixing of check rails on curves on track of all rail sections as per RM 63.86
drawing and to correct alignment and level with Railways fastenings
including leading of rails and fittings, crossing of tracks, greasing of
plate screws with approved grease etc., as per drawing and
directions of Engineer in charge with all contractors labour, tools,
plants, machinery, consumables etc., complete.
Note: Required P.Way fittings will be supplied at SSE/P.Way stores.
211060 Supply and fixing in position pre-cast cement concrete Fouling Mark Each 402.38
as per approved drawing at station yard, duly painting the top surface
and slopes with white enamel paint in two coats and inscribed letters
with black of Fouling Mark, complete in all respects with all labour,
211070 materials
Providing including cement,
and erecting watertools and
proof plantsTent
Gypsy etc.of size 3m x 3m for a Day 451.42
specific period of time and removal of the same after completion of
work or as directed by Engineer in-charge.
125

211080 Providing furniture temporarily at site work in good condition at
different locations as per direction of Engineer In-charge and
removing the same after completion of work.
211081 Office Table of size 1.2m x 0.9m per day Each 82.95
211082 Office Chairs with cushioned seat, back and arms per day Each 34.08
211100 Removing /Re-erecting existing Gradient Post / Kilometre Post, duly
demolishing concrete foundation, fixing the post in cement concrete
foundation as per drawing with 1:3:6 mix using 20mm hard aggregate,
as directed (Cost of concrete work will be paid under relevant item
separately).
211101 For Removing Each 197.12
211102 For Fixing / Re-erecting Each 197.12
211110 Breaking the damaged PSC sleepers including dragging, if required Each -60.64
duly removing inserts safely and handing over inserts to Railways at
Stores or Depot of SSE/P.Way, including disposing the broken
concrete pieces, as directed by Engineer in-charge. Released HTS
wire shall be the property of Contractor.
211120 Fixing vertically the unserviceable PSC sleepers at locations of tress- Each 128.09
passing, railway boundary or to make temporary store by excavating
trench, fixing PSC sleeper in trench and filling back open trench.
211130 Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, Each 3,428.24
placing with released unserviceable PSC sleepers and keeping them
at all four sides of refuge and also placing as matting inside the
refuge by keeping them in upside down position with a minimum of 14
sleepers including levelling with earth, excavation, all lead and lift,
crossing of tracks, leading the sleepers with in a free lead and lift,
handling etc., with all contractor's men material complete and as
directed by the Engineer-in-charge.
Note: Earth-work will to be paid separately under relevant item.
211140 Supplying and spraying in specified proportion Weedicide Chemical, Sqm 0.58
capable to kill entire weed on track / cess / embankment with all
labour, material, tools & plants etc. complete job in all respect.
Scientific name of the chemical is Isopropylamine Salt of Glyphosate,
in which active ingredient is Glyphosate (41%), colour is light amber
to brownish, very low in toxicity and has favourable environmental
characteristics. It will be ensured that no weed growth occurs up to
six months period, otherwise re-spraying shall be done by the
contractor free of cost.
211150 Supplying & applying single liquid solution in 250ml pack, having
break loose torque of 400Nm to 540Nm, as per ISO:10123 norms with
shear strength of liquid solutions as 25 to 35 N/mm2, viscosity 1500
to 3000 (Centipoise) & specific gravity of 1.1 ± 0.05. for tightening of
nuts & bolts at important locations, such as Bridges, SEJs, Turnouts,
Fish Plates, Steel Channel Sleepers etc. Work includes opening of
bolts, cleaning of bolts with suitable cleaner and tightening of bolts
after applying liquid solution as directed by Engineer in-charge.
211151 Bolts dia. 20mm to 25mm Each 25.32
126

211160 Supplying & applying of Poly Chloroprene rubber-based Solvent
(toulene free, i.e. not harmful to human body) to prevent working out
of rubber pads, having density 0.85±0.01 gm/cm3, viscosity of solvent
as 1500 to 1900 (centipoise) at 30 degree centigrade & shear
strength 8 to 12 Kg/Sq.In. for bonding rubber pads / GR Sole Plates
on PSC sleepers complete job, as directed by Engineer in-charge.
211161 PSC Line sleepers Each 24.61

211162 1 in 8½ Turnout Set Set 5,323.65
211163 1 in 12 Turnout Set Set 7,915.24
211164 1 in 8½ Switch Assembly Set 1,328.57
211166 1 in 8½ Crossing Assembly Set 762.29
211167 1 in 12 Crossing Assembly Set 1,105.58
211170 Galvanisation of Railway's Chequered Plates, Channels, Plates, MT 23,255.50
Angles, and I-Section by hot dip process with Zinc Coating and
mass of Zinc coating shall not be less than 705 g/sqm and
galvanisation thickness shall not be less than 100 microns including
necessary surface preparation as per Clause-4 of IS:2629-1985.
Galvanisation shall be done as per IS:2629-1985 and IS:4759-1996
with Zinc conforming to IS:209-1992, duly taking all the measures for
safeguarding against embrittlement of hot-dip galvanised iron and
steel products as per IS:6158-1984 with all contractor's labour,
material, tools, plant, all lead, lift and crossing of tracks etc. complete
and as directed by the Engineer in-charge.
211180 Galvanisation of Railway's stretcher bars, M.S.Liners, ERCs and MT 27,906.60

Plate screws by hot dip process with Zinc Coating and mass of Zinc
coating shall not be less than 705 g/sqm and galvanisation thickness
shall not be less than 100 microns including necessary surface
preparation as per Clause-4 of IS:2629-1985. Galvanisation shall be
done as per IS:2629-1985 and IS:4759-1996 with Zinc conforming to
IS:209-1992, duly taking all the measures for safeguarding against
embrittlement of hot-dip galvanised iron and steel products as per
IS:6158-1984 with all contractor's labour, material, tools, plant, all
lead, lift and crossing of tracks etc. complete and as directed by the
Engineer in-charge.
211200 Hiring of machinery for minor miscellaneous works for short duration
including operator/driver, fuel, lubricants and consumable. The
contractor shall arrange all statutory permits as required by rules and
regulations prevailing in the area of work. Payment shall be made for
actual working hours at site.
211201 JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum Hour 781.72
bucket capacity
211202 Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for Hour 836.21
misc. works of handling of material
127

211203 Tractor with Trolley for local transportation or other misc. works. Hour 200.69
211210 Arranging labour as and when required by the Engineer in charge, for Day 598.06
various works under SSE/P.Way, with contractor's T&P, equipments,
hand signal flags, etc. as per specifications, special conditions and
detailed scope of work as furnished in the tender and as directed by
the Engineer in charge.
Note: Item shall be operated with prior approval of concerned Sr.
DEN / DEN in charge.
211220 Supplying and filling 50 kg size empty cement polythene bags with Each 13.60
Rly. Ballast/moorum/earth/Sand/quarry dust etc. placing the filled
bags on the high banks /bridge approaches/nominated place etc.
dumping and spreading at the nominated locations to profile under
block period with all contractor's labour, tools, plants, loading,
unloading, filling, spreading including all lead/lift etc. complete and as
directed by the Engineer in charge at site including crossing of track
where necessary.
211230 Supply, filling and stacking of sand bags layer by layer filled with Each 12.58
Railway Sand/railway quarry dust in Contractor's empty polythene
cement bags of 50 kg bags with all contractors labour, tools, plants,
lead, lift etc., including stitching the same with machine using
polythene thread complete as directed by Engineer-in charge at site.
211240 Loading of sand/quarry dust filled bags from Railway stacks in to Each 11.73
Railway Wagons with all contractor's empty polythene cement bag,
tools & plants, machinery, labour, lead and lift, crossing of track
wherever necessary etc., complete as directed by the Engineer In
charge.
211250 Manufacturing and fixing buffer stop with Railway supplied rails, Each 13,962.72
cutting, including bending of rails as per plan ,with all contractor’s
labour, materials, tools, plants etc. and all lead and lift including
crossing of track where necessary and as directed by Engineer in
charge at site.
Note: Excavation, fixing rails in cement concrete, drilling of holes will
be paid separately.
211260 Manufacture and supply of Precast Kilometer Posts of size 1.15 x Each 373.42
0.50 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to
work spot, fixing in position with CC 1:3:6 concrete duly making pits of
size as required, painting the post, writing the letters on both sides of
the post with 2 coats of enamel paint of approved quality to the
Railways drawings/IRPWM with contractor's materials, cement, steel,
labour, tools, plant, with all lead and lifts etc., complete as per
specifications and as directed by the Engineer-in-charge.
Note: Excavation, Concrete and steel work will be paid under relevant
items.
128

211270 Manufacture and supply of Precast gradient Posts of size 1.65 x 0.60 Each 513.12
x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to work
spot, fixing in position with CC 1:3:6 concrete duly making pits of size
as required, painting the post, writing the letters on both sides of
posts in 2 coats with enamel paint of approved quality to the Railways
drawings/IRPWM with contractor's materials, cement, steel, labour,
tools, plant, with all lead and lifts etc., complete as per specifications
and as directed by the Engineer-in-charge.
items.
211280 Manufacture and supply of Precast Hectometer/TP Repeater posts of Each 171.91
size 0.90Mx0.30 mx0.30Mx0.30M Triangular size in RCC 1:2:4 mix,
engraving letters, leading to work spot, and fixing in position with CC
1:3:6 concrete, duly making pits of size as required, painting the post
with two coats, letters on the both sides of posts with enamel paint of
approved quality as per IRPWM/Railways drawings complete with
contractor's materials, cement, steel, labour, tools, plant, with all lead
and lifts etc., complete as per specifications and as directed by the
Engineer-in-charge.
items.
129

Irussor - 2021 (Sor) 28 - 07 - 2022

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Irussor - 2021 (Sor) 28 - 07 - 2022

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Irussor - 2021 (Sor) 28 - 07 - 2022

Uploaded by

Copyright:

Available Formats

भारत सरकार

भारतीय रे ल एकीकृ त मानक दर

Sl.No Description Page No.

A General and Operating Instructions 1

2 Bridge Works - Substructure 8

3 Bridge Works - Super Structure (RCC) 20

4 Bridge Works - Super Structure (Steel) 27

5 Bridge Works - Misc. 36

6 Rails, Sleepers and Fittings Renewal 42

7 Turnouts and Renewals 48

8 Deep Screening and Ballast Related Activities 57

10 Reconditioning of Points and Crossings 67

12 Activities at Construction Sites 73

14 Testing of Rails and other Components 88

15 Heavy Track Machines 91

16 Small Track Machines 101

17 Handling of Materials 104

18 Level Crossings 109

19 Bridge Related Activities 116

20 Supply of P.Way Materials 121

21 Miscellaneous Items 125

General and Operating Instructions

1.9 The rate of an item includes:

3. Units used in IRUSSOR

CHAPTER - 1 : Earth Work

011020 Benching of existing embankment manually in steps of 30 cm height Km 105,340.29

011030 Earthwork in filling in embankment, guide bunds, around buried type

011031 Using Soil Class SQ1 Cum 188.26

Item No. Description of Item Unit Rate (₹)

Item No. Description of Item Unit Rate (₹)

013011 Girth over 30 cm and up to 60 cm Each 299.03

Item No. Description of Item Unit Rate (₹)

Item No. Description of Item Unit Rate (₹)

013090 Supplying, laying Non-woven Needle Punched and Mechanically or

CHAPTER - 2 : Bridge Works - Substructure

021011 0m to 10m Metre 1,065.00

Item No. Description of Item Unit Rate (₹)

021130 Conducting standard penetration test as per IS:2131 at Each 802.76

Item No. Description of Item Unit Rate (₹)

021180 Conducting chemical analysis of soil samples to determine Each 1,337.94

022011 All kinds of soils Cum 186.58

Item No. Description of Item Unit Rate (₹)

Item No. Description of Item Unit Rate (₹)

022080 Boring, providing and installation of bored cast in-situ Reinforced

022081 1500 mm diameter Metre 7,793.41

Item No. Description of Item Unit Rate (₹)

022091 1500 mm diameter Metre 11,112.99

Item No. Description of Item Unit Rate (₹)

023011 In all types of soils Cum 279.87

023021 For water depth up to 1.00m Each 49,195.70

Item No. Description of Item Unit Rate (₹)

023040 Dry/Wet Sinking of Circular Wells (Other than pneumatic method) in

Item No. Description of Item Unit Rate (₹)

023091 In well Curb Cum 2,852.12

Item No. Description of Item Unit Rate (₹)

024031 Single Line Each 816,197.43

024032 Double Line Each 1,303,834.76

Item No. Description of Item Unit Rate (₹)