Ser Sor 2010

भारत सरकार
GOVERNMENT OF INDIA
रे ल मं ालय
MINISTRY OF RAILWAYS
दि ण पूव रे ल
एकीकृ त
मानक दर अनुसच
ू ी
(काय एवं साम ी)
ी)
South Eastern Railway

Unified
Standard Schedule of Rates
(Works & Materials)
इं जीिनयिरग िवभाग
Engineering Department
2010
IR's Unified Standard Schedule Of Rates 2010 Chapter-1 : Earthwork
CHAPTER - 1 : EARTHWORK
Item No. Description of Item Unit Rate (Rs.)

EARTHWORK WITH DEFINED LEAD
011010 Earth work in excavation as per approved drawings and
dumping at embankment site or spoil heap, within
railway land, including 50m lead and 1.5m lift, the lead
to be measured from the centre of gravity of excavation
to centre of gravity of spoil heap: the lift to be
measured from natural ground level and paid for in
layers of 1.5m each, including incidental work, as per
specifications-in
011011 All kinds of soils cum 87.81
011012 Ordinary Rock (Not requiring blasting) cum 207.02
011013 Hard Rock (Requiring blasting) cum 283.90
011014 Hard Rock (blasting prohibited) cum 597.65
011020 Extra over 011010 when controlled blasting is required cum 60.12
and is carried out with approval of Engineer.
011030 Extra over items 011010 for spreading and finishing of cum 77.78
fill material on embankment by manual means in
accordance with specifications
011040 Extra for manual compaction of earthwork, where cum 7.07
permitted, with rammers
011050 Extra for lead of earth work above initial lead of 50m, in
all kind of soils and rocks :
011051 for every 50 m or part thereof - lead over 50m and cum 10.98
upto 150m
011052 for every 50m or part thereof - lead over 150m and cum 9.40
upto 500m
011060 Extra for Crossing of railway track (each track). Note : Each 10% per
This item is payable only where crossing of operational Track track
lines is involved
011070 Extra for every additional lift of 1.5m or part thereof, cum 8.90
after the initial 1.5m, for earth work in all soils
EARTH WORK IN BUILDINGS
012010 Extra over item 011010 for excavation in foundations cum 9.40
for buildings and bridges to cover dressing to neat
dimension and plumbing sides etc. Note : Dressing
under this item is payable for the total quantity of
excavation in foundation and not partly
012020 Benching of rock upto average 10 cm depth for 10 Sqm 495.15
foundations. Note : Rate is for benched area measured
in plan.
012030 Extra for watering and ramming earth in foundation and cum 16.60
floors in 15cm layers. Note : This item is payable
where ramming is not included in the original rate for
earthwork in filling.
1 of 6 : Chapter-1 Page 1

012040 Filling, watering and ramming earth in 15 cm layers in cum 20.10
floors and foundations with surplus earth from
foundations including 50m lead and 1.5m lift
012050 Supplying and filling sand in plinth and under floors cum 389.08
including watering, ramming, consolidating and
dressing complete
012060 Preparing and laying puddle on roof etc. including
supply of materials and all lead and lift
012061 With Railway's earth cum 60.00
012062 With contractor’s earth cum 215.90
012070 Open timbering in trenches for foundations and shafts,
wells, cesspits, manholes, underground tanks & the like
- including strutting and shoring complete :
012071 Depth upto 1.5m Sqm 72.90
012072 Depth exceeding 1.5m but not exceeding 3m Sqm 74.58
012073 Depth exceeding 3m Sqm 77.59
012080 Close Timbering in trenches for foundations and shafts,
wells, cesspits, manholes, underground tanks & the
like, including strutting and shoring complete :
012081 Depth upto 1.5m Sqm 144.27
012082 Depth exceeding 1.5m but not exceeding 3m Sqm 147.05
012083 Depth exceeding 3m Sqm 153.50
012090 Extra for planking and strutting, if required to be left
permanently in position (face area of the timber
permanently left to be measured)
012091 In open timbering Sqm 563.46
012092 In close timbering Sqm 1078.39
Earthwork with indeterminate lead in New lines,
Doubling, Projects, etc.
013110 Earthwork in cutting (Classified) in formation, trolley
refuges, side drains, level crossing approaches,
platforms, catch water drains, diversion of nallah &
finishing to required dimension and slopes to obtain a
neat appearance to standard profile inclusive of all
labour, machine and materials and removing & leading
all cut spoils either to make spoil dumps beyond 10m.
from cutting edge or for filling in embankment with all
leads within the section limit, lifts, ascent, descent,
loading, unloading, all taxes/royalty, clearance of site
and all incidental charges, bailing & pumping out water
if required, etc., complete as per directions of the
Engineer-in-Charge. The work is to be executed as per
Latest / updated edition of "Guidelines for Earthwork in
Railway Projects" issued by RDSO, Lucknow. Cut trees
shall be property of Railways and to be deposited in the
railway godown unless specified otherwise in the
Special conditions of contract

Note - (i) All usable earth arising from cut spoils shall
be led into bank formation and Unusable spoils shall be
dumped / stacked (ii) All hard rock /and boulders not
fit for filling will be stacked by the contractor and will
be property of the Railways.
013111 In all conditions and classifications of soil except rock cum 153.87
013112 Soft rock not requiring blasting in all Conditions cum 227.08
013113 In hard rock requiring blasting with explosives and cum 389.79
blasting/drilling equipment Including all incidental work
in all conditions. Rate includes cost of all explosive
material
013114 In rock and very hard rock with hammer / chisel / cum 474.67
pavement breaker etc. where blasting is not permitted
due to special circumstances and if specifically ordered
in writing incl. drilling and all incidental work in all
conditions
013115 In any other type of soil not covered above where cum 153.87
classification is not possible
013120 Earthwork in filling in embankment, guide bunds, cum 327.61
around buried type abutments, bridge gaps, trolley
refuges, rain bunds if provided, platforms etc. with
earth excavated from outside railway boundary entirely
arranged by the contractor at his own cost as per
RDSO's latest guidelines and specifications and special
condition of contract including all leads, royalty, lifts,
ascents, descents, crossing of nallahs or any other
obstructions. The rates shall include all dressing of
bank to final profile, demarcation and setting out of
profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing
slope of old bank, all handling/re-handling. taxes,
octroi and royalty etc. as a complete job. Cut trees shall
be property of railways and to be deposited in the
railway godown unless specified otherwise in the
Special conditions of contract
013130 Extra for mechanical compaction of earth/blanketing cum 14.14
material filled in embankment with contractor’s rollers
of suitable capacity, type and size to achieve specified
density as per specification, testing as per IS codes
incl. cost of water, T&P consumable material and all
labour as a complete job. The work is to be executed as
per Latest edition of "Guidelines for Earthwork in
Railway Projects" issued by RDSO, Lucknow

013140 Removal of excavated/slip earth/ debris/ malba from cum 119.87
the site of works to any other place outside Railway
land/premises, including all excavations, handling, re-
handling, loading, unloading and leading, etc. all labour
and material as a complete job. Removal of Earth (all
kinds of soils)/ROCKS, BOULDERS including mud/slush,
slipped earth in catch water drains, side drains, over
berms in cutting, water way of bridges, over coping of
toe/breast/retaining walls etc. including crossing of
nallah, railway tracks, making/repairing approach roads
if required, all lead, lift, ascent, descents, or any other
obstruction. Earth spoils to be dumped outside the
cutting or railway embankments as per direction of
Engineer in charge
013150 Laying and spreading blanketing materials (Natural or cum 60.92
Mechanically prepared as per GE -1 or G.E.IRS- 2) over
new/old embankment/cutting in layers of 30 cm in
loose state to make the embankment of designed
profile as per specifications. The rate is inclusive of
initial site clearance, cutting of shrubs, removal of roots
of vegetation growth & heavy grass, surfacing and
leveling to give required slope, benching if required on
existing bank slope, dressing and finishing of bank, all
lead & lift, ascent, descent, crossing of nallahs/ other
obstructions, spreading the material and final dressing
of slopes and top surface as per specified camber using
contractor’s own machinery, equipment, T&P labour
etc., as a complete job. Note - The rate does not
include supply / compaction of blanketing material at
site which shall be paid separately.
013160 Finishing blanketing material, already compacted, in 100 Sqm 625.01
accordance with specification - over embankment
including sides/cutting.
MISCELLANEOUS :
014010 Dressing Surface (average excavation or filling upto 15 10 sqm 58.90
cm) including removing vegetation in all kind of soil.
Payment against this item is to be made only if it is not
included in earth work item
014020 Daghbel or lock spit 15 cm deep & minimum width at 100 101.20
top 20 cm. Payment against this item is to be made metre
only if it is not included in earth work item.
014030 Felling trees of girth (measured at a height of 1m above
ground level) including lead and stacking of material
within 100m. Note : 1. When stumps are grubbed up in
addition, the rates shall be doubled for trees cut and
grubbed. 2. Payment for grubbing shall only be made
where specially ordered. 3. Grubbing shall be ordered
only where it is essential to remove the stumps,
including the roots, as per specification. 4. Grubbing
shall include removal of roots of trees and saplings to a
depth of 60 cm below ground level - ... Contd. ---

.. Contd. - or 30 cm below formation level or 15 cm
below sub grade level, whichever is lower
014031 Girth over 30 cm and upto 60 cm Each 103.10
014032 Girth over 60 cm and upto 1.5m Each 247.60
014033 Girth over 1.5m upto 3 m Each 560.00
014034 Girth over 3 m Each 941.10
014040 Benching slopes, cuts 30 cm in height and Sqm 6.99
approximately 60 cm wide
014050 Turfing / planting, including all lead and lift, and
watering as required until properly rooted, with. Note -
Initially payment of only 40% will be made. Balance
60% will be paid only after 3 months of maintenance
period if the turfing is properly rooted.
014051 Turfing with sods, 10cm thick and 20 cm square closely 100 Sqm 5004.87
laid
014052 Turfing with planted doob grass 100 Sqm 5173.88
014053 Planting Sarkanda / sarpat or any other suitable species 100 Sqm 3868.65
approved by the engineer
014060 Providing and laying Jute Geo-Textile (JGT) in slopes of
Railway embankment in accordance with RDSO's
guidelines for application of Jute Geotextile in Railway
embankments and hill slopes no. RDSO/2007/GE:G-
0008 or its subsequent versions, including incidental
earthwork and fixing arrangements
014061 With GJ - Type 1 100 Sqm 2771.61
014062 With GJ - Type 2 100 Sqm 3381.39
014063 With GJ - Type 3 100 Sqm 4722.93
014070 Cleaning out silt from bed of reservoir/canals including 10 cum 59.97
50m lead and lift upto 1.5 m
014080 Cleaning side drains in cuttings by the side of track
(Kutcha or Pucca) including disposal of the debris, soil,
muck etc. as directed by the engineer. Note - Rates are
for disposal at the end of cutting. Disposal of
debris/soil/muck beyond end of cutting to be paid for
under relevant lead item.
014081 lead within cutting is up to 50 m cum 97.90
014082 lead within cutting is over 50 m and up to 200 m - for cum 30.20
every 50 m or part thereof
014083 lead within cutting exceeds 200 m - for every 100 m or cum 30.20
part thereof
014090 Earth work in embankment from Railway land for cum 75.96
repairing of cess/formation/level crossing, rain cuts etc.
to make the surface to the desired level and slope to
the entire satisfaction of Engineer-in-charge. The rate
will include free lead upto 200 M, all lifts, descends,
ascends, crossing of track/road/nallah etc. including
breaking of clods etc and compaction by
rollers/rammers/temping rods etc. Note - This item is
only to be paid when specially ordered in writing.

014100 Extra rate for quantities of works executed. Note - The
extra percentage rate is applicable in respect of each
item, but limited to quantities of work executed in
these difficult conditions.
014101 In or under water and/or liquid mud, including pumping cum 0.20
out water as required. Note - In or under water means
locations/levels where there is continuous ingress of
water.
014102 In or under foul position, including pumping out water cum 0.25
as required. Note - Foul position means filthy and
unhygienic conditions where physical movements are
hampered such as soil mixed with sewage or night-soil.
014110 Providing and removing barricading with the help of metre 245.84
portable fencing along the running track where the
work is to be done in close vicinity of the track. Fencing
shall consist of self supporting steel angles of size 50
x50x6mm, 1.5m long provided with hooks etc. and
embedded in CC 1:2:4 block of size 0.23x0.23x0.23M
placed at c/c distance of 2.0 M along the track. 12 mm
dia rods in three horizontal layers tack welded with the
angle posts including providing Retro-reflective tapes in
Horizontal & vertical direction. Note : Released material
will be the property of the contractor after the
completion of work. Cost of cement to be paid
separately.
014120 Supplying and laying of Biaxial Geo-grid, made from Sqm 299.97
virgin high density polypropylene, having aperture size
of 65mmx 65mm and ultimate tensile strength of 30
kN/m with minimum junction efficiency of 95% &
minimum radial stiffness of 350 kN/m (@0.5% strain)
and laying below ballast over formation, including
transportation, contractor's labour, lead and lift
complete as per directions of Engineer-in-charge
014130 Supplying and laying of Woven Geotextile made from Sqm 143.30
polypropylene multifilament yarn, having minimum
mass of 220 GSM & ultimate tensile strength of 40
kN/m with puncture resistance of 600 N and apparent
opening size of 150 microns and laying at interface of
sub-grade and blanketing layer, including
transportation, contractor's labour, lead and lift
complete as per directions of Engineer-in-charge
New Items To Be Added By Zonal Railways
015010
015020
015030
015040
015050
015060
015070
IR's Unified Standard Schedule Of Rates 2010 Chapter-2 : Carriage of Materials
CHAPTER - 2 : CARRIAGE OF MATERIALS
Item No. Description Of Item Unit Rate (Rs.)
Note : For all items under this Chapter : (1) Only net
quantity after deduction of voids, if any as per
specifications will be paid. (2) Rates are for complete
items and include all lift, ascent and descent, if any. (3)
Where heavy materials are involved, rates include use of
machinery and equipment like cranes, lifting tackles,
tripod with chain and pulley, ramps, cribs etc. complete
at contractor's cost. (4) Distance for lead will be the
shortest practicable distance and may be less than the
route adopted by the contractor for his own convenience
and will be decided by the Engineer in-charge. (5)
Loading and unloading to be considered separate
operations for purpose of payment.
021010 Loading/Unloading F.P.S. / Modular bricks including 1000 401.95
manual lead upto 50m and stacking properly into/from nos.
trucks, trailors or wagons
021020 Leading bricks FPS / Modular upto 50m including picking 1000 550.61
up nos.
021021 Additional lead for every subsequent 50m or part 1000 90.67
thereof over 50m and upto 500m over item 021020. nos.
021030 Leading bricks FPS / Modular by truck, trailor, etc. for 1000 177.15
lead upto 10 km. Lead under this item is payable when nos.
the same exceeds 500 M.
021040 Loading/Unloading stone sets of different sizes including Cum 401.94
lead upto 50m and stacking properly into/from trucks,
trailors or wagons
021050 Leading stone setts of different size upto 50m including Cum 508.74
picking up and stacking
021051 Additional lead for every subsequent 50m or part Cum 101.12
thereof over 50m and upto 500m over item 021050
021060 Leading stone setts by trucks, trailer, etc. for lead upto Cum 88.58
10 km. Note : Lead under this item is payable when the
same exceeds 500 M.
021070 Loading/Unloading ballast, kankar, brickbats, stone- Cum 39.14
chips, shingle, stone boulders, block kankar, pitching
stones , rubble stones, laterite, coal, surkhi, dry mortar,
sand , moorum, earth, manure or sludge, ashes, lime
etc., including lead up to 50m and stacking into/from
trucks, trailors or wagons
021080 Leading ballast, kankar, surkhi, lime, sand, ashes, stone- Cum 92.17
chips, pitching, stone, boulders, soling, stone, rubble
stone, brickbats, shingle, dry mortar, laterite or similar
materials including picking up and stacking, lead upto
50m
021081 Additional lead for every subsequent 50m or part Cum 22.96
thereof, over 50m and upto 500m over item no. 021080
021090 Leading ballast, kankar, brickbats, stone-chips, shingle, Cum 88.58

stone boulders, block kankar, pitching stones , rubble
stones, laterite, coal, surkhi, dry mortar, sand , moorum,
earth, manure or sludge, ashes, lime, debris, muck,
malba, etc.. for lead upto 25 km. Note : Lead under this
item is payable when the same exceeds 500 M.
021100 Loading/Unloading cement in bags, coal-tar, asphalt, MT 34.16
paint etc. including lead upto 50m and stacking properly
into/from trucks, trailors or wagons.
021110 Leading cement in bags, coal-tar, asphalt, paint, MT 90.02
including picking up and stacking, lead upto 50m
021111 Additional lead for every subsequent 50m or part MT 22.82
021120 Leading cement in bags, coal-tar, asphalt, paint, by MT/Km 106.29
truck, trailor, etc. for lead upto 10 km. Note : Lead
under this item is payable when the same exceeds 500
021121 M.
Additional lead for every subsequent km or part thereof, MT/Km 8.92
over 10 km and upto 100 km.
021122 Additional lead for every subsequent km or part thereof, MT/Km 5.67
021130 Loading/Unloading G.I. sheets, rails, joists, built up
sections, angles, C.I., Ductile pipes, A.C Pipes, or G.I.
pipes RCC/PCC beams / slabs and other miscellaneous
ironwork or wood work including lead upto 50m and
stacking properly into/from trucks, trailors or wagons.
021131 Individual length upto 3.5 M MT 105.84
021132 Individual length more than 3.5 M MT 115.77
021140 Leading miscellaneous materials such as iron work, rails, MT 102.95
fitting & fastenings, pipes, wooden logs, stones over
pitching stone size, RCC/PCC beams / slabs etc. and all
similar articles (each individual article or bundle being
not more than 3.5 metres long in the longest direction)
including picking up unloading and stacking, lead upto
50m.
thereof, over 50m and upto 500m over item no. 021140.
fittings & fastenings, pipes, wooden logs, stones over
pitching stone size, RCC/PCC beams / slabs etc and all
similar articles (each individual article or bundle being
not more than 3.5 metres long in the longest direction)
including all loading, unloading and stacking, lead over
500m and upto 10 km. Note : Lead under this item is
payable when the same exceeds 500m.
over 10 km and upto 100 km over item no. 021150.
over 100 km and upto 400 km over item no. 021150
&.021151
over 400 km and upto 1000 km over item nos. 021150,
021151 & 021152
021160 Leading miscellaneous materials such as iron work, rail, MT 104.60
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc and all similar articles
(each individual article or bundle being more than 3.5
metres long in the longest direction) including picking up
and stacking, lead upto 50m.
pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres
long in the longest direction) by truck, trailor, etc
including all loading, unloading and stacking, lead over
500m and upto 10 km. Note : Lead under this item is
payable when the same exceeds 500m.
over 100 km and upto 400 km over item nos. 021170
&.021171
over 400 km and upto 1000 km over item nos. 021170,
021171 & 021172
021180 Loading/Unloading wooden sleepers (BG/MG/NG ) of all MT 31.95
varieties, new and serviceable, including lead upto 50m
and stacking properly into/from trucks, trailors or
wagons
021190 Leading (BG/MG/NG) wooden sleepers including picking MT 101.63
up and stacking, lead upto 50m.
021191 Additional lead to for every subsequent 50m or part MT 21.88
021200 Leading (BG/MG/NG) wooden sleepers/ wooden scrap by MT 106.26
truck trailor, etc. including loading, unloading and
stacking for lead upto 10 km. Note : Lead under this
item is payable when the same exceeds 500 M.
&.021201
over 400 km and upto 1000 km over item no. 021200,
021201 & 021202
021210 Loading/Unloading wooden sleepers scrap (BG/MG/NG) MT 42.32
into/from tracks, trailors or wagons including lead upto
50m.
021220 Loading/Unloading ballies of all varieties including lead

upto 50m and stacking into/from wagons, trailors or
trucks:
021221 Upto 7m long. 100 no. 183.53
021222 Over 7 m & Upto 10m long. 100 no. 224.95
021230 Leading ballies upto 7m long, including loading, 100 no. 401.97
unloading and stacking, lead upto 50m.
021231 Additional lead for every subsequent 50m or part 100 no. 94.12
021240 Leading ballies over 7 M & upto 10m long, including 100 no. 600.59
loading, unloading and stacking, lead upto 50m.
021250 Leading ballies over 7m & upto 10m long, by truck, 100 no. 516.13
trailor, including loading, unloading and stacking, for
lead upto 10 km. Note : Lead under this item is payable
when the same exceeds 500 M.
021260 Loading/Unloading hume pipes with or without collars of MT 422.48
all types including lead upto 50m and stacking into/from
wagons, trailors or trucks.
021270 Leading hume pipes with or without collars, by truck, MT 125.88
trailor, etc. including loading, unloading and stacking,
for lead upto 10 km. Note : (i) Lead under this item is
payable when the same exceeds 500 M.
021280 Loading/Unloading into wagons, trailors or trucks light Each 15.28
articles such as wooden or steel almirahs, tables, chairs,
machinery and other miscellaneous articles, each
weighing less then 1/2 quintal, including lead upto 50m
and stacking.
021290 Leading light articles such as wooden or steel almirahs, Each 23.74
tables, chairs and other miscellaneous articles,
machinery etc. each weighing less than 1/2 quintal,
including loading unloading and stacking, lead upto 10
km. Lead under this item is payable when the same
exceeds 500 M.
021291 Additional lead for every subsequent km or part thereof, Each 2.14
over 10 km and upto 100 km over item no. 021290.
over 100 km and upto 400 km over item no 021290
&.021291.
over 400 km and upto 1000 km over item no 021290,
021291& 021292.
021300 Loading/Unloading into/from wagons, trailors or trucks Each 21.12
heavy articles such as wooden or steel almirahs, tables,
machinery and other miscellaneous articles, each
weighing over 1/2 quintal and upto 2 Quintal, including
lead upto 50m and stacking.
021310 Leading heavy articles such as wooden or steel Each 73.39

almirahs, tables, machinery, etc. and other
miscellaneous articles, each weighing less than 1/2
quintal and upto 2 quintals, including loading, unloading
and stacking, lead upto 10 km. Lead under this item is
payable when the same exceeds 500 M.
021311 Additional lead for every subsequent km or part thereof, Each/ Km 5.87
over 10 km and upto 100 km over item no 021310.
over 100 km and upto 400 km over item no. 021310 &
021311
021311& 021312
021320 Loading/Unloading into/from wagons, trailors or trucks Each 42.71
heavy machinery each weighing over 2 quintals and upto
5 quintals each, including lead upto 50m and stacking
021330 Leading heavy machinery (individual piece weighing Each 125.88
over 2 quintals and upto 5 quintals), for lead upto 10
km. Note : Lead under this item is payable when the
same exceeds 500 M.
over 100 km and upto 400 km over item no. 021330 &
021331
021331& 021332
021340 Loading / unloading of Four wheeler wagon. (A bogie Each 813.05
wagon will be taken as equivalent to two four wheeled
wagons)
021341 Extra, if the loading/unloading in four wheeler wagon Each 284.57
has to be done in a block section, i.e. on the running line
outside station section. (A bogie wagon will be taken as
equivalent to two four wheeled wagons) In Day time
(From 6.00 AM to 18.00 PM)
021342 Extra if the loading/unloading in four wheeler wagon has Each 406.53
to be done in a block section, i.e. on the running line
outside station section. (A bogie wagon will be taken as
equivalent to two four wheeled wagons.) In night time
(From 18.00 PM to 6.00 PM)
021350 Stacking / Restacking wooden sleepers of all varieties
and sizes including lead upto 50m.
021351 BG Sleepers 100 no. 422.48
021352 MG Sleepers 100 no. 323.17
021353 NG Sleepers 100 no. 262.42
021360 Stacking ballast, kankar, brickbats, stone chips, shingle, Cum 12.27
stone boulders, block kankar, pitching stones, rubble
stones, surkhi, laterite, dry mortar, sand, moorum,
ashes, lime etc. if not covered in the original item.
021370 Extra over initial lead of 50 M for crossing each running Each 0.10
track for the items covered in this chapter.
021380 Leading of flower pots of sizes each weighing upto 10kg. 100 no. 113.44
i.e. flower pots with plants including picking up and
stacking, lead upto 50m.
021390 Leading of flower pots of sizes each weighing upto 10kg, 100 no. 421.67
i.e. flower pots with plants including loading, unloading
and stacking, lead over 500 M and upto 10 km.
021400 Leading of flower pots of sizes each weighing over 10kg. 100 no. 202.88
i.e. flower pots with plants including picking up and
stacking, lead upto 50m.
021410 Leading of flower pots of sizes each weighing over 10kg. 100 no. 134.75
i.e. flower pots with plants including loading, unloading
and stacking, lead over 500 M and upto 10 km.
021420 Sorting of steel materials of any type, size- wise MT 439.71
into/from the store yard, measuring and stacking the
same / including weighing, if required within the lead of
100 metres, as directed
021430 Hiring and operating Multi-Utility vehicle of loading Each per 25878.22
capacity one MT with sitting capacity of 4/6 persons, 4 month
strokes, 4 cylinders engine, factory-built metal body,
cargo box type or passenger cabin type or both (with 24
hours availability), including cost of fuel, lubricants,
major/minor repairs, salary of driver, toll tax, all other
tax complete, operation and maintenance including
running upto 1200 km in a month. The vehicle shall run
on pucca, kutcha road and along the track. The
contractor shall arrange road permit for vehicles for all
the States of operation, as per instructions of engineer in-
charge and vehicle shall not be more than three years
old.
021440 Extra over item no. 021430 for every additional km or Km 21.52
part thereof over 1200 km in a month.
021450 Hiring of Truck of loading capacity 9.0 MT and running Each per 71285.13
upto 2500 km per month (with 24 hours availability) for month
leading of Engineering Machines, Materials & Men, as
desired by Engineer-in-charge. It includes cost of driver,
helper, fuel, e.g. diesel, mobil oil, brake oil etc.
alongwith related repairs works and all type of taxes as
admissible by State or Central Governments, octroi, toll
tax, barrier tax etc. Vehicle shall run on pucca, kutcha
road including along the track. The contractor shall
arrange road permit for vehicle for all the States of
operation, as per instructions of engineer in-charge and
vehicle shall not be more than three years old.
021470 Hiring of Truck of loading capacity 4.5 MT and running Each per 51367.34
021490 Hiring of Truck of loading capacity 1 MT and running Each per 32684.61
021510 Hiring of JCB Machine (in good working condition) for Hour 908.22
leveling and dressing ground / dismantling structures
including disposal of debris through dumpers etc. with
contractor’s labour, JCB machine, machine operator,
fuel, etc. The contractor shall arrange road permit for
vehicle for all the States of operation, as per instructions
of engineer in-charge and vehicle shall not be more than
three years old. Payment shall be made for actual
working hours at site.
021520 Hiring of Truck with covered body of 2 MT capacity for Day 1568.99
one shift of 8 hours running upto 80 km including driver,
cleaner together with fuel and other consumable stores
etc. for transport of different engineering materials.
part there of over 80 km in a day.
021540 Hiring of Bulldozer with 12 feet wide blade including Hour 734.00
necessary fuel, oil and operator etc. complete as
directed by engineer in-charge. The contractor shall be
responsible for arranging all types of permits required
for movement of the bulldozer. Payment shall be made
for actual working hours at site.
021550 Hiring of Road Crane of 25 MT capacity including Hour 1344.65

necessary fuel, oil and operator etc. complete as
directed by engineer in-charge. The contractor shall be
responsible for arranging all types of permits required
for movement of the Crane. Payment shall be made for
actual working hours at site.

022010
022020
022030
022040
022050
022060
022070
022080
022090
022100
IR's Unified Standard Schedule Of Rates 2010 Chapter-3 : Plain Concrete
CHAPTER - 3 : PLAIN CONCRETE
Cement
Qty.(qtl.)
CEMENT CONCRETE (CAST-IN-SITU) :
031010 Providing and laying in position cement concrete

of specified proportion excluding cost of cement,
centering and shuttering - All works upto Plinth
level :
031011 1:3:6 (1 cement : 3 sand : 6 graded stone cum 1593.12 2.200
aggregate 20mm nominal size)
031014 1:5:10 (1 cement : 5 coarse sand : 10 graded cum 1482.95 1.300
stone aggregate 40mm nominal size)
031015 1:2:3.5:9 (1 cement : 2 Fly Ash : 3.5 sand : 9 cum 1479.74 1.700
graded stone aggregate 40mm nominal size)
031016 1:2.5:4:11 (1 cement : 2.5 Fly Ash : 4 sand : 11 cum 1467.25 1.300
031020 Providing and laying cement concrete, up to
plinth in retaining walls, walls (any thickness)
including attached plasters, columns, pillars,
posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain
window sills, fillets etc, excluding the cost of
cement and of shuttering, centering.
031022 1:3:6 (1cement : 3 sand : 6 graded stone cum 1775.11 2.200
031024 1:1.5:3 (1cement : 1.5 sand : 3 graded stone cum 1774.56 4.000
031030 Providing and laying 1:3:6 cement concrete (1 cum 1639.00 2.200
cement:3 sand:6 graded stone aggregate 20 mm
nominal size) in kerbs, steps and the like at or
near ground level excluding cost of cement and of
centering, shuttering and finishing :
031040 Dry concrete without mortar in foundation and
floors rammed in layers not exceeding 15 cm
thick :
031041 a) With graded stone aggregate 40mm nominal cum 1129.56
size
031042 b) With graded brick aggregate 40mm nominal cum 863.91
size
Cement
Qty.(qtl.)
031050 Providing and laying in position cement concrete
of M 20 grade, excluding the cost of cement and
of centering and shuttering, as per direction of
the Engineer in charge :
031051 All works upto Plinth level cum 1754.79 As appd in
Design Mix
031052 All works above plinth level in retaining walls, cum 1866.36 As appd in
walls (of any thickness) including attached Design Mix
pilasters, columns, pillars, posts, struts,
buttresses, anchor blocks, parapets, copings, bed
blocks, string or lacing courses, window sills,
fillets, kerbs, steps etc.
031060 Centering and shuttering including strutting,
propping etc. and removal of form work for :
031061 Foundations, footings, bases of columns Sqm 129.28
031062 Retaining walls, return walls, walls (any Sqm 212.72
thickness) including attached plasters, buttresses,
plinth and string courses fillets etc.
031063 Columns, pillars, posts and struts & Sqm 266.87
miscellaneous parts
CEMENT CONCRETE (PRECAST) :
032010 Providing and fixing precast 1:3:6 cement cum 1736.46 2.800
concrete (1 cement : 3 sand : 6 graded stone
aggregate 20mm nominal size) in string or lacing
courses, coping, bed plates, anchor blocks, plain
window sills, shelves, louvers, steps etc. upto
floor two level including hoisting and setting in
position with cement mortar 1:3 (1 cement : 3
coarse sand), cost of required shuttering,
centering and finishing smooth with 6mm thick
cement plaster 1:3 (1 cement : 3 sand) on
exposed surface complete - excluding the cost of
cement. (cast at site)
032020 Providing and fixing precast M 15 grade cement cum 2052.56 3.8 or as
concrete in string or lacing courses, coping, bed appd in
plates, anchor blocks, plain window sills, shelves, design
louvers, steps, etc. upto floor two level, including mix
hoisting and setting in position with cement
mortar 1:3 (1 cement : 3 coarse sand), cost of
required shuttering, centering complete -
excluding the cost of cement. (cast at site)
032030 Providing and fixing at or near ground level,
Precast M 20 grade cement concrete as per
approved design and setting in position with
cement mortar 1:3 (1 cement : 3 coarse sand),
including the cost of required centering and
shuttering complete but excluding the cost of
cement.(cast at site)
032031 in kerbs, edging etc. cum 1910.75 4.04 or as
appd in
design mix
Cement
Qty.(qtl.)
032032 in ash pit stones, platform coping stones etc. cum 2339.23 4.04 or as
appd in
design mix
032040 Extra over items 032010 and 032020 for cum 135.90
providing and fixing precast concrete above floor
two level for every floor or part thereof.
032050 Providing and laying cement concrete 1:2:4 in
damp-proof course (1 cement : 2 sand : 4
graded stone aggregate 12.5mm nominal size -
excluding the cost of cement and including
providing, fixing and removal of forms.
032051 25mm thick Sqm 89.24 0.080
032052 40mm thick Sqm 117.89 0.130
032053 50mm thick (20 mm coarse aggregate instead of Sqm 139.64 0.160
12.5mm)
032060 Extra for providing and mixing water proofing per 50 114.29
material of brand approved by railway, if not kg of
included in relevant item. cement
032070 Applying a coat of residual petroleum bitumen of Sqm 85.59
penetration 80/ 100 of approved quality using
1.7kg per square metre on damp proof course
after cleaning the surface with brushes and finally
with a piece of cloth lightly soaked in kerosene
oil.
032080 Providing Precast plain cement concrete jali
1:2:4 (1 cement : 2 sand : 4 stone chips 12.5mm
nominal size) including hoisting and setting in
position with cement mortar 1:3 (1 cement : 3
coarse sand) including the cost of centering,
shuttering and finishing complete including the
cost of cement and of plastering of jambs, sills
and soffits.
032081 40mm thick Sqm 305.07 0.002
032082 50mm thick Sqm 352.61 0.003
MISCELLANEOUS :
033010 Extra for every subsequent 3m height ( or part cum 135.90
there of ) above floor two level from plinth level
for concrete work in superstructure
033020 Extra for laying concrete in or under water and/ cum/m 243.60
or liquid mud including cost of pumping or bailing depth
out water and removing slush etc. complete.
Note : The quantity will be calculated by
multiplying the depth measured from the sub-soil
water level upto centre of gravity of concrete
under sub-soil water level with quantity of
concrete in Cum executed under sub-soil water.
The depth of centre of gravity shall be reckoned
correct to 0.1m, 0.05m or more shall be taken as
0.1m and less than 0.05m ignored.
Cement
Qty.(qtl.)
033030 Extra for laying concrete in or under foul positions cum 85.74
033040 Supplying and using fly ash in concrete as per cum 39.07
approved mix design where permitted by
engineer
033050 Extra for rounding of drains and keeping to metre 28.33
proper template and grade including the cost of
template
033060 Supply and using cement at worksite :
033061 OPC 43 grade Tonne 5750.00
033062 OPC 53 grade Tonne 6325.00
033063 PPC Tonne 5635.00
033064 Sulphate Resisting Cement Tonne 7168.33
033070 Supplying and applying bisphenol and butyl based Sqm 3944.94
epoxy for repairing pot holes, spalled area, ramps
stairs, heavy duty floors etc. and grouting
application on surfaces which need chemical
resistance. (Item includes removing all loose and
chipped concrete plaster etc., cutting surface in
proper square or rectangular shape, cleaning
surface with compressed air, applying epoxy
grout and finishing it with suitable tools with
minimum 3mm thickness. Complete job is
inclusive of scaffolding, as required.)
033080 Supplying and applying magnesium poly Sqm 4734.72
phosphate based concrete fast repair epoxy for
providing bonding to all construction materials,
such as steel, glass, wood or concrete. (Complete
job includes removing loose, chip substances,
cleaning area with damped cloth and
subsequently cleaning with compressed air.
Applying epoxy and finishing smooth the repaired
area with suitable tools etc. job includes
providing scaffolding etc., wherever required.)
033090 Supplying and applying gun grade, poly urethane metre 138.01
grade crack sealer for filling cracks in concrete,
metals, plastic, wood etc. (Complete job includes
cleaning surface, applying surface activation
agent and applying sealer agent, finishing and
smoothening with proper tools.)
Cement
Qty.(qtl.)
033100 Supplying and applying bisphenol polyurethane Sqm 6021.75
coating of 100% solid epoxy compound for
repairs of leaky metal/concrete water storage
tanks. (Complete job : Tank surface should be
identified & cleaned by suitable water based Bio-
Degradable Cleaner. It should be abrasive blasted
to a near metal finish alongwith application of
priming coat. Ferro Silicone based epoxy
compound be applied on built-up surface upto
minimum thickness of 3mm and top coat of
bisphenol polyurethane coating to be applied upto
thickness of 500 microns. Entire coated surface
be inspected using NDT-pin Hole Detector.)
033110 Supplying and applying two components anti-slip Sqm 5112.73
epoxy coating (as per IR Standard Specifications)
which should withstand heavy vehicular and
pedestrian traffic and should adhere to metal,
wood and concrete surfaces. It should be
chemical resistant. The job includes priming of
surface with suitable primer, abrasive cleaning of
surface, followed by cleaning with solvents.
033120 Supplying, applying and finishing abrasion- Kg 39.55
resistant colour hardener over freshly laid
concrete surface as per manufacturers
recommended quantity for incorporating non-
fading permanent colour pattern and design as
approved by Engineer-Incharge
033130 Supplying & mixing high range poly carboxylate Kg 72.84
ether base water reducing admixture Plast Super-
C700 conforming to IS:9103-1999 (to be added
@ 1% by weight of cement) for CC & RCC work
for controlling water cement ratio and for gaining
early strength
034010
034020
034030
034040
034050
034060
IR's Unified Standard Schedule Of Rates 2010 Chapter-4 : Reinforced Cement Concrete
CHAPTER - 4 : REINFORCED CEMENT CONCRETE
Cement
Qty.(qtl.)
CAST IN SITU
041010 Providing and laying in position M 20 Grade
concrete for reinforced concrete structural
elements but excluding cost of centering,
shuttering, reinforcement and Admixtures in
recommended proportion (as per IS:9103) to
accelerate, retard setting of concrete, improve
workability without impairing strength and
durability as per direction of Engineer in charge
041011 All work upto plinth level, including raft foundation cum 2123.57 3.44 or as
of washable aprons, HS tank, pile cap, footings of appd. in
design mix
FOB, and Platform shelter etc.
041012 All work in buildings above plinth level upto floor cum 2548.28 3.44 or as
two level. appd. in
design mix
041015 In kerbs, steps and the likes etc. cum 3096.37 3.44 or as
appd. in
design mix
041016 In arches, arch ribs, domes, vaults, shells, folded cum 1879.23 3.44 or as
plates and roofs having slopes above 150 appd. in
design mix
041017 In chimneys and shafts cum 2170.68 3.44 or as
appd. in
design mix
041018 In vertical and Horizontal fins individually or cum 1861.65 3.44 or as
forming box louvers, facias and eaves boards appd. in
design mix
FORM WORK :
propping etc. and removal of form for :
042011 Foundations, footings, bases of columns, raft Sqm 128.80
foundation of washable aprons, Pile caps, Footings
of FOB etc.
042012 Walls (any thickness) including attached plasters, Sqm 212.70
buttresses, plinth and string courses etc.
042013 Suspended floors, roofs, landings, balconies, FOB Sqm 205.20
slabs, walkway slabs and access platform
042014 Lintels, beams, plinth beams, bed blocks, girders, Sqm 180.45
bressumers and cantilevers
042015 Columns, pillars, , posts and struts Sqm 266.90
042016 Stairs (excluding landings) except spiral-staircases Sqm 245.40
042017 Spiral staircases (including landing) Sqm 264.49
042018 Arches, domes, vaults upto 6m span Sqm 665.50
042019 Extra for arches, domes, vaults exceeding 6m span Sqm 287.30
propping etc. and removal of form for special
shapes
042021 Chimneys and shafts Sqm 216.40
Cement
Qty.(qtl.)
042022 Vertical and horizontal fins individually or forming Sqm 271.50
box louvers band, facias and eaves boards
042023 Extra for shuttering in circular work (20% of Sqm 0.20
respective centering and shuttering items)
042024 Small lintels not exceeding 1.5m clear span, Sqm 94.61
moulding as in cornices, window sills, string
courses, bands, copings, bed plates, anchor blocks
and items of similar shape and size
042025 Edges of slabs and beams in floors and walls under metre 73.60
20 cm wide
042026 Edges of slabs and beams in floors and walls above Sqm 301.11
20 cm wide
042027 Cornices and mouldings Sqm 408.16
042028 Small surfaces such as cantilever ends, brackets Sqm 301.11
and ends of steps, caps and bases to pilasters and
columns and items of similar shape and size
042029 Weather shade, Chajjas, corbels etc. including Sqm 323.10
edges
042030 Extra for additional height in centering, shuttering Sqm 83.90
wherever required with adequate bracing, propping
etc. including cost of de-shuttering and de-
centering at all levels, over a height of 3.5m, for
every additional height of 1 metre or part thereof
in Suspended floors, roofs, landing, beams and
balconies (Plan area to be measured)
042040 Supplying and applying shuttering oil for mould Sqm 7.08
releasing, having (Flash point 54 degree C and
specific gravity 0.88±0.02) for concrete formwork
to be applied either by brush or with spray
machine to the entire satisfaction of Engineer
Incharge
PRE-CAST R.C.C. (Cast at site )
043010 Providing, hoisting and fixing in position upto floor
two level M20 Grade precast RCC work including
setting in cement mortar 1:3 (1 cement : 3 coarse
sand) and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on exposed
surfaces complete including cost of centering,
shuttering, finishing, Admixtures in recommended
proportion (as per IS:9103) to accelerate, retard
setting of concrete, improve workability without
impairing strength and durability, excluding cost of
cement and steel reinforcement, as per approved
plan & direction of Engineer incharge.
043011 In string courses, bands, coping, bed plates, cum 2416.10 4.04 or as
anchor blocks, plain window sills, and the like appd in
design mix
043012 In small lintels upto 1.50m clear span cum 3150.26 4.04 or as
appd. in
design mix
Cement
Qty.(qtl.)
043013 In lintels, beams, bressumers cum 4052.95 4.04 or as
appd. in
design mix
043014 In Shelves, cantilevers, chajjas, sunshades etc. cum 4052.95 4.04 or as
appd. in
design mix
043015 In slabs for drain covers, manhole covers, flue tops cum 2618.68 4.04 or as
etc. appd. in
design mix
043016 In vertical and horizontal fins individually or cum 4293.43 4.04 or as
forming box louvers appd. in
design mix
043017 In mouldings as in cornices, window sills etc. cum 2776.76 4.04 or as
appd. in
design mix
043018 In door and window frames cum 2548.95 4.04 or as
appd. in
design mix
043019 In blocks of complicated design such as C blocks cum 4592.31 4.04 or as
of cabins, Platform walls etc. appd. in
design mix
043020 Providing, hoisting and fixing in position M25 cum 2378.36 4.34 or as
Grade Reinforced cement concrete in Precast appd. in
design mix
standard Platform wall sections, including the cost
of centering, shuttering, finishing, Admixtures in
recommended proportion (as per IS 9103) to
durability but excluding the cost of cement and
steel reinforcement, as per approved plan & as per
direction of the Engineer incharge.
ENCASING ROLLED STEEL SECTION :
044010 Encasing rolled steel sections, in beams and cum 1880.27 3.20 or as
columns with Grade 15 cement concrete 1:2:4 (1 appd. in
design mix
cement: 2 sand: 4 graded stone aggregate
12.5mm nominal size) including centering and
shuttering but excluding the cost of cement and
reinforcement, ungalvanised wire mesh/expanded
metal and hangers.
044020 Extra for providing and fixing expanded metal Sqm 280.33
mesh of size 20x60mm and strands 3.25 mm wide
1.6mm thick weighing 3.64kg. per sqm for
encasing of rolling steel sections/built up sections
in beams, columns and grillages excluding cost of
hangers.
044021 Encasing RS or rail section with 12mm mesh rabbit Sqm 208.68
wire including cost of rabbit wire.
REINFORCEMENT :
045010 Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position
and binding all complete.
045011 Mild steel and medium tensile steel bars Kg 45.29
045012 Hard drawn steel wire Kg 55.83
045013 Cold twisted bars Kg 48.41
Cement
Qty.(qtl.)
045014 High yield strength deformed bars Kg 48.41
045015 Hard drawn steel wire fabric Kg 56.24
045016 Thermo-Mechanically Treated bars Kg 48.41
045020 Supplying anti corrosive reinforcement bars with
fusion bonded epoxy coating after sand blasting,
cleaning, induction, heating etc. of the
reinforcement bars complete as per specification.
including cutting, bending, placing in position and
binding all complete.
045021 Upto 16mm dia bars Kg 62.44
045022 More than 16mm dia bars Kg 59.81
045030 Extra for providing and mixing polyester triangular Kg 390.26
synthetic fibres in specified ratio (@ 0.25% of
cement by weight), 6 to 18 mm in length,
designed for melting point 240ºC to 260ºC and
having specific gravity of 1.33 to 1.40 in all types
of works of CC, RCC, plaster etc.
ADDITIONS / DEDUCTIONS
046010 Extra for RCC work in superstructure above floor cum 216.54
two level for every floor or part thereof.
046020 Extra for rendering smooth the top of suspended Sqm 23.49 0.073
floors, landings and staircases (treads and risers)
with cement mortar 1:2 (1 cement: 2 coarse sand)
including a floating coat of neat cement and
protecting the surface with a layer of 7.5cm of
earth laid over
046030 Add or deduct for plaster drip course/ groove in metre 14.12
plastered surface or moulding to R.C.C.
projections.
EXPANSION JOINTS
047010 Providing and fixing in position copper plate as per Kg 399.13
design for expansion joints.
047020 Providing and filling in position, blown bitumen in per cm 417.72
expansion joints. depth/cm
width/ 100m
length
047030 Providing and filling in position bitumen mix filler per cm 139.42
of proportion 80kg of hot bitumen, 1kg of cement depth/cm
width/ 100m
and 0.25cum of coarse sand for expansion joints.
length
047040 Providing and fixing in position 12mm thick per cm 428.88
bitumen impregnated fibre board conforming to IS: depth/ 100m
length
1838 including cost of primer, sealing compound in
expansion joints.
047050 Providing and fixing sheet covering over expansion
joints with iron screws as per design to match the
colour/ shade of wall treatment.
047051 Non-Asbestos sheet 6mm thick, 150mm wide metre 75.74
047052 Non-Asbestos sheet 6mm thick, 200mm wide metre 101.74
047053 Aluminium fluted strips 3.15mm thick, 150mm metre 391.31
wide
Cement
Qty.(qtl.)
047054 Aluminium fluted strips 3.15mm thick, 200mm metre 429.65
wide
MISCELLANEOUS
048010 Extra for laying reinforced cement concrete in or cum/m 276.56
under water and / or liquid mud including cost of depth
pumping out water and removing slush etc.
complete. Note : The quantity will be calculated by
multiplying the depth measured from the subsoil
water level upto the centre of gravity of the R.C.C.
in cubic metre executed under subsoil water. The
depth of centre of gravity shall be reckoned correct
to 0.1m, 0.05m or more shall be taken as 0.1m
and less than 0.05m ignored. No extra payment
shall be made for placing the reinforcement or
centrring or shuttering under the sub soil water
level.
048020 Extra for laying reinforced cement concrete in or cum/m 85.74
under foul position depth
048030 Supplying cement / epoxy grout and sealing of
cracks by injection process through nipples with
pressure of at least 1.4 kg/sqm till the grout
comes out through adjacent nipples, complete as
per specification
048031 Using cement grout kg 33.84
048032 Using epoxy grout as per manufacturer’s kg. 310.78
specification
048040 Supplying, fitting and fixing nipples with approved Each 80.41 As per site
fixing compound after making grooves 10mm wide conditions
and 10mm deep, drilling holes for grouting along
cracks in CC/ RCC structures, sealing of grooves
including subsequent cutting/ removal and sealing
of the holes of nipples after grouting by the
approved fixing compound, complete as per
specification.
048050 Supplying and applying epoxy mortars (average Sqm 1646.91
thickness 5mm) over leached, honey combed,
spalled concrete surface and exposed steel
reinforcement after thorough cleaning of the
exposed concrete/ reinforcement with wire brush,
etc. complete as per specification. Note: This item
is to be paid for only where concreting of the
defective work was not the responsibility of the
same contractor.
Cement
Qty.(qtl.)
048060 Providing and fixing shear anchors made of HTS
bars of required dia, shape & design & fixing by
drilling holes in the existing concrete/masonary to
bond new work with the old work. Shear anchors
to be provided at specified distance. These anchors
will be embedded as per drawing inside existing
concrete/masonary and will be fixed by Polymer
based ready grouts as per manufacture’s
specification to ensure proper bonding with old
structures. The shear anchor will be as per drawing
or as directed by Engineer-in-charge
048061 With 12mm dia bars Each 111.83
048062 With 16mm dia bars Each 143.92
048070 Vacuum dewatering of all types & grade concrete Sqm 36.12
by mechanical means including draining out the
sucked excess water from concrete & then
finishing the surface smooth with mechanical
trowelling with suitable equipment etc. complete.
The methodology to be adopted will be as per user
manual of dewatering & trawling machine and as
directed by Engineer.
048080 Carrying out mechanical trowelling of concrete Sqm 9.94
surface so as to obtain smooth shrinkage cracks
free surface. Methodology to be adopted as per
users manual of the equipment & as directed by
Engineer – in – Charge.
048090 Extra for making anti-slip grooves in RCC staircase Sqm 145.02
3mm wide and 3mm deep
048100 Keeping holes for holding down bolts in foundation Each 38.38
blocks or bed blocks
048110 Grouting of holding down bolts with cement mortar Each 29.20 0.002
in foundation blocks or bed blocks.
048120 Manufacturing, supplying & fixing of pr-fabricated Each 1143.58
RCC coping stone of size 530mm x 1125mm x
100mm thick as per top face designed and
approved by site Engineer with M-30 grade RCC
with 8 mm dia. tor steel at 150mm c/c both ways
and manufactured by vibro compaction process
using jointless FRP/GRP steel moulds of required
size, shape & design. The item includes cost of
cement, reinforcement, transportation etc. (Note :
Under layer of cement mortar to be laid as per site
conditions & should be paid for separately)
048130 Supplying & applying with mechanical sprayer Sqm 31.66
water-based concrete curing compound
(membrane curing) covering 3.5 to 5 sqm of
surface area per litre of compound. It should give
75% or more curing efficiency when tested to BS
7542 & comply with BS 8110 Part-I, Clause 6.63(c)
049010
049020
IR's Unified Standard Schedule Of Rates 2010 Chapter-5 : Brick Work
CHAPTER - 5 : BRICK WORK
Cement
Qty.(qtl.)
051010 Brick work with non-modular (FPS) bricks of class
designation 7.5 in foundation and plinth in :
051011 Cement lime mortar 1:1:6 (1 cement : 1 lime putty cum 2090.76 0.625
: 6 fine sand)
: 9 fine sand)
051013 Cement mortar 1:3 (1 cement : 3 fine sand) cum 1964.68 1.270
051016 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 1825.31 1.270
051019 In mud mortar. (with contractor's Mud) cum 1702.28
051020 Brick work with modular bricks of class designation
7.5 in foundation and plinth in :
051022 Cement Mortar 1:4 (1 cement : 4 fine sand) cum 2317.66 0.840
051023 Cement Mortar 1:6 (1 cement : 6 fine sand) cum 2317.66 0.550
051025 Cement Mortar 1:4 (1 cement : 4 coarse sand) cum 2337.11 0.840
051026 Cement Mortar 1:6 (1cement : 6 coarse sand) cum 2356.92 0.550
051030 Brick work with machine moulded perforated bricks
of class designation 12.5 conforming to IS: 2222 -
1991 in superstructure from beyond plinth level
upto 6m above plinth level in cement mortar 1:6 (1
cement : 6 coarse sand)
051031 With non-modular (FPS) bricks cum 2780.30 0.625
051032 With Modular bricks cum 2672.91 0.550
051040 Extra over item 051010 & 051020 for brick work in cum 139.25
superstructure beyond plinth level upto floor two
051050 level
Extra : for brick work in superstructure beyond cum 162.03
second floor level for every 3m or part thereof :
051060 Extra for brick work in square or rectangular pillars cum 169.14
051070 Extra for brick work in Circular pillars cum 103.14
051080 Extra for Making tapered surface of brick masonry cum 136.28
051090 Extra for brick work with bricks of class designation cum 250.09
7.5 curved on plan upto a mean radius not
exceeding 6 metres
051100 Extra for cutting or chamfering of bricks to required metre 4.50
shape in masonry work
Cement
Qty.(qtl.)
051110 Constructing tharry (Platform) with bricks of class Sqm 388.02 0.313
designation 7.5 laid on edge in cement mortar 1:4
(1 Cement : 4 coarse sand), cement pointing 1: 2
(1 Cement : 2 fine sand) including necessary
excavation and 10cm bed of cement concrete
1:5:10 (1 Cement : 5 fine sand :10 graded stone
aggregate, 40mm nominal size) complete
051120 Extra for forming cavity 5cm to 7.5cm wide in cavity Sqm 56.75
walls with necessary weep and vent holes including
use of cores and cost of providing and fixing
bitumastic coated M .S. ties 300mm long of
25x3mm section at not less than 3 ties per sqm as
051130 per approved
Providing half design
brick masonry with FPS bricks of class metre 79.61 1.430
designation 7.5 in cement mortar 1:3 (1cement:
3coarse sand) in superstructure for closing cavity 5
to 7.5cm wide in cavity wall complete with 10cm /
11.4cm wide bitumen felt type 3 grade1.
051140 Brick work 7 cm thick with bricks of class Sqm 183.82 0.092
designation 7.5 in cement mortar 1:3 (1 Cement : 3
coarse sand) in superstructure
051150 Brick work in plain arches in superstructure cum 3685.19 1.280
including centring and shuttering complete for
span upto 6 metres with bricks of class designation
7.5 in cement mortar 1:3 (1 Cement : 3 coarse
051160 sand)
Brick work in gauged arches in superstructure in cum 4455.82 1.280
cement mortar 1:3 (1 Cement : 3 coarse sand)
including centring and shuttering complete, for span
upto 6 meters with bricks of class designation 7.5.
051170 Extra for additional cost of centring/shuttering for Sqm 287.30
arches exceeding 6m span including all shuttering,
bolting, wedging and removal (Area of the soffit to
be measured)
051180 Half brick masonry with bricks of class designation
7.5 in foundations and plinth in :
051181 Cement mortar 1:3 (1 cement : 3 coarse sand) Sqm 231.57 0.143
051182 Cement mortar 1:4 (1 Cement : 4 coarse sand) Sqm 232.01 0.106
051190 Extra for half Brick masonry in superstructure Sqm 38.21
above plinth level upto floor two level
051200 Extra for half brick masonry in superstructure above Sqm 14.50
floor two level for every floor or part thereof.
051210 Extra for providing and placing in position 2 Nos. Sqm 0.13
6mm dia. M.S.bars at every third course of half
brick masonry (with non-modular (FPS) bricks)
including cost of M.S. bars
051220 Extra for providing and placing in position 2 Nos. Sqm 51.06
6mm dia. M.S.bars at every third course of half
brick masonry (with modular bricks) including cost
051230 of M.S. bars.
Providing brick band/string course 10/7 cm thick metre 3.89 Extra
5/5.7 cm projected from wall face, in bricks of class 0.004
designation 7.5 laid in cement mortar 1:4 (1
cement : 4 coarse sand)
Cement
Qty.(qtl.)
BRICK TILE WORK
052010 Tile brick masonry with tile bricks of class
designation 10 in foundation and plinth in :
052011 Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine cum 3969.40
sand)
: 6 fine sand)
: 6 coarse sand)
052020 Tile brick masonry with machine moulded tile bricks
of class designation 12.5 conforming to IS : 2690
(Part I) - 1992 in foundation and plinth in:
052021 cement mortar 1:6 (1 Cement : 6 coarse sand) cum 3510.49 1.000
052022 cement mortar 1:4 (1 Cement : 4 coarse sand) cum 3516.99 1.520
052030 Extra over item 052011 to 052019 for tile bricks cum 365.82
masonry with tile bricks of class designation 10 in
superstructure beyond plinth level upto floor two
level.
052040 Extra over item 052011 to 052019 for tile brick cum 204.75
masonry with tile bricks of class designation 10 in
superstructure above floor two level for every floor
or part thereof
052050 Deduct from items 052011 to 052019 if tile bricks of cum 270.75
class designation 7.5 are specified or permitted by
engineer instead of class designation 10 :
052060 Extra over Item (Item 052011 and 052021) for tile cum 241.51
brick masonry in square or rectangular pillars.
052070 Extra over items 052011 and 052021 for tile brick cum 390.69
masonry curved on plan upto a mean radius not
exceeding 6 metres.
052080 Tile brick masonry with tile bricks of class cum 5067.38 1.520
designation 10 in plain arch work in superstructure
in cement mortar 1:4 (1 Cement : 4 coarse sand)
including centring and shuttering complete
052090 Tile brick masonry with tile bricks of class cum 5809.89 1.330
designation 10 in gauged arch work in
superstructure in cement mortar 1:4 (1 Cement :
4 coarse sand) including centring and shuttering
complete
052100 Tile brick masonry work 5cm thick with tile bricks of Sqm 206.40 0.077
class designation 10 in cement mortar 1:3 (1
cement : 3 coarse sand) in superstructure.
HONEY COMB WORK
Cement
Qty.(qtl.)
053010 Honey-comb brick work 10/11.4 cm thick with Sqm 158.23 0.066
bricks of class designation 7.5 in cement mortar 1:4
(1 Cement : 4 coarse sand)
053020 Honey-comb brick work 20/23 cm thick with bricks Sqm 316.47 0.132
of class designation 7.5 in cement mortar 1:4 (1
Cement : 4 coarse sand)
MOULDING AND CORNICE
054010 Moulding and cornices with brick masonry in cement metre/c 1.09 Extra
mortar 1:4 (1 Cement : 4 coarse sand) (girth to be m girth 0.004
measured in cm and length in running metre)
054020 Extra for laying brick work in or under water and/or cum/m 243.60
liquid mud including cost of pumping or bailing out depth
water and removing slush etc. complete
054030 Extra for laying brick work in or under foul position cum 85.74
EXPOSED BRICK WORK

055010 Brick work with selected non-modular (FPS) bricks
of class designation 7.5 in Exposed brickwork
including making horizontal and vertical grooves
10mm wide, 12mm deep complete from ground
level upto plinth level in cement mortar
055011 1:6 (1 Cement : 6 fine sand) cum 1966.58 0.625
055012 1:6 (1 Cement : 6 coarse sand) cum 1981.97 0.625
055020 Brick work with modular bricks of class designation
7.5 in Exposed brick work including making
horizontal and vertical grooves 10mm wide 12mm
deep complete from ground level upto plinth level in
cement mortar
055030 Brick work with machine moulded modular bricks of
class designation 12.5 in Exposed brick work
including making horizontal and vertical grooves
10mm wide 12mm deep complete from ground level
upto plinth level in cement mortar
055040 Brick work with machine moulded non-modular
(FPS) bricks of class designation 12.5 in Exposed
brick work including making horizontal and vertical
grooves 10mm wide 12mm deep complete from
ground level upto plinth level in cement mortar
Cement
Qty.(qtl.)
055050 Brickwork with machine moulded / perforated non-
modular (FPS) bricks of class designation 12.5
conforming to IS : 2222-1991 in Exposed brick
work including making horizontal and vertical
grooves 10 mm wide 12mm deep complete from
ground level upto plinth level in cement mortar
055060 Extra for exposed brickwork in superstructure above cum 447.05
plinth level upto floor two level.
055070 Brickwork with clay fly ash FPS bricks of class
designation 75 in superstructure above plinth level
upto floor two level. In:
055071 Cement lime mortar 1:2:9 (1cement: 2 lime putty: cum 2592.34 0.425
9fine sand).
055072 Cement lime mortar 1:1:6 (1cement: 1lime putty: cum 2564.65 0.625
6coarse sand).
055073 Cement mortar 1:4 (1 cement: 4 fine sand). cum 2369.03 0.950
055074 Cement mortar 1:6 (1 cement: 6 fine sand). cum 2369.03 0.625
055075 Cement mortar 1:4 (1 cement: 4 coarse sand). cum 2388.48 0.950
055076 Cement mortar 1:6 (1 cement: 6 coarse sand). cum 2384.42 0.625
055080 Extra for exposed brickwork / clay fly ash brickwork cum 271.79
in superstructure above floor two level, for every
floor or part thereof.
055090 Brickwork with modular fly ash lime bricks (FALG
Bricks) conforming to IS:12894–1989, class
designation 10 in superstructure above plinth level
upto floor two level in :
Note for item No. 055090 : These items will be
operated only for load bearing structure upto 2
storeys and for non-load bearing walls 23cm thick
in multi-storeyed building
055100 Brick work with modular calcium silicate bricks
machine moulded conforming to IS:41398–1989,
class designation 10 in superstructure above plinth
level upto floor two level in :
055110 Brick work with modular extruded burnt fly ash clay
sewer bricks (conforming to IS: 4885 – 1988) in
foundation and plinth
055111 Cement mortar 1:4(1 cement : 4 coarse sand) cum 2860.11 0.836
Cement
Qty.(qtl.)
055120 Brick work with modular extruded burnt fly ash cum 4890.32 1.120
sewer bricks (conforming to IS: 4885 – 1988) in
arches in foundation and plinth in cement mortar
1:3 (1cement: 3fine sand)
055130 Deduct from any brickwork item, if bricks (FPS) Cum 1306.63
supplied by railway
055140 Deduct from any brickwork item, if brickbats cum 208.78
supplied by railways
055150 Joining old brickwork with new brickwork Sqm 61.75 0.020
CC BLOCK MASONRY
056010 Cement Concrete Hollow Block Masonry in
foundation and plinth with:(factory made blocks)
056011 Cement mortar 1:3 (1cement: 3fine sand) cum 4177.73 As Per Site
Decision
Decision
056013 Cement mortar 1:6 (1cement: 6coarse sand) cum 4191.11 As Per Site
Decision
Decision
056020 Extra over Item 056010 for Cement Concrete cum 348.13
Hollow Block masonry in superstructure above
plinth level upto floor two level
056030 Extra over Item 056010 for Cement Concrete cum 271.79
Hollow Block masonry in superstructure above floor
two level for every floor or part thereof
056040 Cement Concrete Solid Block Masonry in foundation
and plinth with:(factory made blocks)
Decision
Decision
056043 Cement mortar 1:6 (1cement: 6coarse sand) cum 4730.12 As Per Site
Decision
Decision
056050 Extra over Item 056040 for Cement Concrete Solid cum 429.86
Block masonry in superstructure above plinth level
upto floor two level
056060 Extra over Item 056040 for Cement Concrete Solid cum 326.15
Block masonry in superstructure above floor two
level for every floor or part thereof
MISCELLANEOUS
057010 Reinforced brickwork with well burnt bricks in lintels cum 2317.90 1.610
and shelves with cement mortar 1:2 (1 cement: 2
coarse sand) including centering and shuttering and
fabrication of steel reinforcement complete.
(Reinforcement to be paid separately)
057020 Cutting vertical/horizontal/sloping chase in old metre 50.43 0.020
brickwork upto 10X10 Cm and making good the
same with CC 1:2:4 or CM 1:2 as per site conditions
Cement
Qty.(qtl.)
057030 Making holes in old brick walls upto 15 cm square, Each 48.69 0.010
fixing bolts clamps etc and making good the same
with CC 1:2:4 or CM 1:2 as per site conditions
057040 Cutting holes, 0.1 sqm size, for bathroom drains,
exhaust fan holes or for similar purposes etc
including repairs
057041 In 10/11.5cm thick walls Each 7.29 0.010
057042 In 20/23cm thick walls Each 14.57 0.020
057043 In 30/34.5cm thick walls Each 19.17 0.030
057050 Stripping off / Chipping and cleaning bricks 1000 240.04
recovered from dismantled masonry including Nos.
057060 stacking
Extra to rates for steining in wells with bricks,
FPS/Modular of designation 12.5/10/7.5
057061 Upto 2 m inside dia. cum 748.01
057062 Above 2 m and upto 6 m inside dia. cum 725.74
057070 Jack arching (brick work only) 115 cm thick (Class
designation 7.5 - non-modular (FPS) / Modular )
including all lead and lift at any floor
057071 In cement mortar 1:3 Sqm 307.68 0.153
057072 In cement mortar 1:4 Sqm 308.51 0.114
057080 Changing weathered bricks( Class designation 7.5 - Each 5.61 0.002
non-modular (FPS) / Modular) in building or bridges
in cement mortar 1:4
057090 Cutting bricks to different sizes for work like 100 no. 34.96
ornamental cornice etc. where each brick has to be
cut to produce the finished work when not covered
in original rates
057091 Extra rate for brickwork in coping including cum 140.52
057092 chamfering
Fixing wooden plugs (average size 40mm x40 mm Each 15.26
x75 mm) in walls or floors and finishing the surface,
complete in Brickwork
057100 Add or deduct from rates of brickwork when the
bricks specified or permitted to be used by
Engineer are of Class designation other than 7.5
057101 Add for Class designation 12.5 cum 381.68
057102 Add for Class designation 10 cum 295.62
057103 Deduct for Class designation 5 cum 181.34
057104 Deduct for Class designation 3.5 cum 276.77
057110 Add or deduct from rates of brickwork when the
machine moulded bricks specified or permitted to
be used by Engineer are of Class designation other
than 12.5
057111 Deduct for Class designation 10 cum 37.41
057112 Deduct for Class designation 7.5 cum 74.14
Cement
Qty.(qtl.)
057120 Making plinth protection with bricks of class
designation 75 laid on edge in cement mortar 1:6
(1cement: 6coarse sand) with 12mm thick bed of
cement mortar 1:6 (1cement: 6coarse sand) over
75mm bed of cement dry brick aggregate 40mm
nominal size rammed, consolidated and grouted
with fine sand and the top of bricks pointed with
cement mortar 1:3 (1cement: 3fine sand.)
057121 With non-modular (FPS) bricks Sqm 368.61 0.105
057122 With Modular bricks Sqm 425.00 0.097
057130 Brick edging (approx) 7cm wide 11.4cm deep to metre 17.57 0.014
plinth protection / along road edges with bricks of
class designation 7.5 including grouting with
cement mortar 1:4 (1cement: 4fine sand)
057140 Edging with bricks laid dry length wise( App 7.5cm
deep) including excavation, refilling, consolidating
with hand packing and spreading neatly surplus
earth within a lead of 50metres
057141 7.5 class designation, non-modular (FPS) / modular metre 16.28
bricks
057142 5 class designation, non-modular (FPS) / modular metre 12.79
bricks
057150 Providing brick edging (with bricks of class metre 45.60
designation 7.5) 22.5 cm wide and 11.5 cm deep
laid dry including excavation refilling and disposal
of surplus earth within 50m
057160 Providing toothed (diagonal) brick edging (with metre 22.36
bricks of class designation 7.5) laid dry along paths
etc with FPS/ Modular bricks
057170 Providing and fixing 50mm overall thickness, non- Sqm 1676.30
asbestos fibre reinforced aerated cement sandwich
modules made out of light weight fibre reinforced
aerated cement concrete core composed of portland
cement, fly ash, binders etc. and 4mm thick non-
asbestos fiber cement boards conforming to
IS:14862-2000 and ISO 8336-1993 (E) on either
side of the core having a tongue and groove on
longitudinal side of the modules. These solid wall
panel modules are installed using galvanised iron
steel channels 1.0mm thick and of size 15 x 50 x 25
mm as bottom track; size 38 x 50 x 38mm as top
track for fixing to floor and top of wall respectively
including all necessary material required for
grouting of joints, fixtures etc. complete as per
directions of engineer in charge. (for payment net
area of wall to be measured)
058010
058020
058030
IR's Unified Standard Schedule Of Rates 2010 Chapter-6 : Stone Work
CHAPTER - 6 : STONE WORK
Cement
Qty.(qtl.)
RANDOM RUBBLE MASONRY :
061010 Random rubble masonry with hard stone in
foundation and plinth including levelling up with
concrete as per specifications, upto plinth level
with :
061011 Cement mortar 1:3 (1cement:3 fine sand) cum 1567.99 1.680
061012 Cement mortar 1:4 (1cement:4 fine sand) cum 1567.99 1.250
061013 Cement mortar 1:6 (1cement: 6coarse sand) cum 1609.60 0.830
061014 Cement mortar 1:6 (1cement: 6fine sand) cum 1589.29 0.830
061015 Lime mortar 1:1:1 (1lime putty: 1surkhi: 1 fine cum 2211.57
sand )
061016 Cement Lime mortar 1:1:6 (1Cement: 1Lime: 6 cum 1797.12 0.775
fine sand)
061020 Extra for random rubble masonry with hard stone cum 393.60
in superstructure above plinth level up to floor
two level, including levelling up with concrete as
per specifications, at window sills, ceiling level
and the like
061030 Extra for random rubble masonry with hard stone
in :
061031 Square or rectangular pillars cum 168.84
061032 Circular pillars cum 542.26
061033 Extra for random rubble masonry with hard stone, cum 215.74
curved on plan for a mean radius not exceeding
6m
COURSED RUBBLE MASONRY :
062010 Coursed rubble masonry (1st sort) with hard
stone in foundation and plinth with :
062015 Lime mortar 1:1:1 (1lime putty: 1surkhi: 1fine cum 2473.92
sand)
062016 Cement Lime mortar1:1:6 (1Cement: 1Lime: 6 cum 2116.50 0.705
fine sand)
062020 Coursed rubble masonry (2nd sort) with hard
stone in foundation and plinth with :
sand)
Cement
Qty.(qtl.)
062026 Cement Lime mortar1:1:6 (1Cement: 1Lime: 6 cum 1971.80 0.705
sand ordinary)
062030 Extra for coursed rubble masonry with hard stone cum 332.55
(first or second sort) in superstructure above
plinth level up to floor two level
062040 Extra for coursed rubble masonry with hard stone cum 198.62
(first or second sort) in superstructure above floor
two level for every floor or part thereof
062050 Extra for coursed rubble masonry with hard stone
(first or second sort) in :
062060 Extra for coursed rubble masonry (first or second cum 234.53
sort) with hard stone curved on plan for a mean
radius not exceeding 6m
LATERITE MASONRY
063010 Laterite Masonry in foundation and plinth with :
063011 Cement mortar 1:3 (1cement: 3 fine sand) cum 1439.12 1.530
063013 Cement mortar 1:6 (1cement: 6 coarse sand) cum 1450.20 0.750
sand)
063016 Cement Lime mortar1:1:6( 1Cement: 1Lime: 6 cum 1564.10 0.705
sand ordinary)
063020 Extra for Laterite Masonry in superstructure above cum 200.37
plinth level upto floor two level
063030 Extra for Laterite Masonry in superstructure above cum 200.92
floor two level for every floor or part thereof
063040 Extra for Laterite masonry in :
063050 Extra for Laterite masonry curved on plan for a cum 165.63
mean radius not exceeding 6m
ASHLAR MASONRY :
064010 Stone work plain ashlar in superstructure upto
floor two level in cement mortar 1:6 (1cement:
6coarse sand) including pointing with cement
mortar 1:2 (1white cement: 2stone dust) with an
admixture of pigment matching the stone shade
064011 Red Sand stone cum 25797.42 0.490
064012 White Sand stone cum 24201.34 0.490
064020 Stone work plain ashlar in superstructure upto
floor two level in cement mortar 1:4 (1cement:
4coarse sand) including pointing with cement
admixture of pigment matching the stone shade
064021 Red sand stone cum 22255.33 0.690
Cement
Qty.(qtl.)
064022 White sand stone cum 23870.52 0.690
064030 Stone work plain ashlar in arches in cement
mortar 1:3 (1cement: 3coarse sand) including
centring, shuttering and pointing with white
cement mortar 1:2 (1white cement: 2stone dust)
with an admixture of pigment matching the stone
shade
064040 Stone work plain ashlar in domes in cement
centring, shuttering and pointing with white
cement mortar 1:2 (1white cement: 2stone dust)
shade
064050 Stone work ashlar punched (ordinary) in
superstructure upto floor two level in cement
mortar 1:6 (1 cement: 6coarse sand) including
pointing with cement mortar 1:2 (1 white cement:
2stone dust) with an admixture of pigment
matching the stone shade
064060 Extra for stone work, plain ashlar or ashlar cum 397.23
punched above floor two level for every floor or
part thereof
064070 Extra for plain ashlar or ashlar punched :
064080 Extra for stone work; plain ashlar or ashlar cum 724.78
punched curved on plan with a mean radius not
exceeding 6m
064090 Extra over Item 064030 for additional cost of Sqm 287.30
centring for arches exceeding 6m span including
all strutting, bolting, wedging etc. and removal
(area of soffit to be measured)
MISCELLANEOUS STONE WORK :
065010 Stone work (red sand stone) for wall lining etc.
(veneer work) over 12mm thick bed of cement
lime mortar 1:1:6 (1cement: 1lime putty: 6fine
sand) including pointing in white cement mortar
1:2 (1white cement: 2stone dust) with an
admixture of pigment matching the stone shade.
(To be secured to the backing by means of cramps
which shall be paid for separately)
065011 Red sand stone, 70mm thick Sqm 2078.98 0.045
Cement
Qty.(qtl.)
065020 Stone work (white sand stone) for wall lining etc.
lime mortar 1:1:6 (1cement: 1lime putty: 6fine
1:2 (1white cement: 2stone dust) with an
admixture of pigment matching the stone shade.
(To be secured to the backing by means of cramps
this shall be paid for separately)
065021 White sand stone, 70mm thick Sqm 1986.26 0.045
065030 Extra for stone work (veneer work) curved on plan cum 1041.87
with a mean radius not exceeding 6m
065040 Providing and fixing gun metal cramps of required
shape for anchoring stone wall lining to the
backing or securing adjacent stones in stone wall
lining in cement mortar 1:2 (1cement: 2fine sand)
including making the necessary chases
065041 25x6mm – 30cm long Each 80.69 0.030
065042 15x6mm – 16.5cm long Each 77.79 0.020
065050 Providing and fixing stone dowels 10x5x2.50cm Each 17.31 0.007
cut to double wedge shape as per design in
including making the necessary chases
065060 Providing and fixing copper pins 7.5cm long 6mm Each 15.53 0.007
dia. for securing adjacent stones in stone wall
lining in cement mortar 1:2 (1Cement: 2 fine
sand) including making the necessary chases
065070 Providing and fixing sloping chajja of stone 40mm
thick and upto 80cm wide beyond the wall as
measured along the slope, exposed surface well
dressed on both sides, in cement mortar 1:4
(1cement: 4coarse sand) with 12mm diameter
anchoring steel bar 45cm long fixed in each stone
and supported on and including with bricks cove
of class designation 7.5 in cement mortar 1:4
(1cement: 4coarse sand) including pointing in
cement mortar 1:2 (1 white cement: 2stone dust)
shade
065071 Red sand stone Sqm 783.71 0.056
065072 White sand stone Sqm 827.27 0.056
Cement
Qty.(qtl.)
065080 Providing and fixing horizontal chajja of stone
40mm thick and upto 80cm projection exposed
surface well dressed on both sides, in cement
pointing in white cement mortar 1:2 (1cement:
2stone dust) with an admixture of pigment
matching the stone shade
065090 30 mm thick red sand stone sun-shade (chisel- Sqm 623.84 0.022
dressed) supported on red sand stone brackets,
fixed in wall with cement mortar 1:4 (1cement:
4coarse sand) including finishing complete
including brackets 30 mm thick
065100 Providing and fixing red sand stone brackets Each 2054.44 0.030
55x22.5x45cm sunk and moulded including
providing and fixing with 4Nos. gun metal cramp
25x6mm, 30cm long and dowel bars 7.5cm long
6mm dia as per design
065110 Stone work, plain in copings, cornices, string
courses and plinth courses, in cement mortar 1:6
(1cement: 6coarse sand) including pointing with
white cement mortar 1:2 (1white cement: 2stone
dust) with an admixture of pigment matching the
stone shade
065120 Providing and fixing red sand stone shelves fixed
in wall in cement mortar 1:3 (1cement: 3coarse
sand) including finishing complete
065121 30 mm thick Sqm 290.13 0.050
065122 40 mm thick Sqm 353.37 0.050
065123 50 mm thick Sqm 493.91 0.050
065124 75 mm thick Sqm 349.86 0.080
065125 100mm thick Sqm 427.15 0.080
065130 Providing and fixing red sand stone shelves
(chisel dressed) supported on 40x40x6mm T or
angle iron brackets 0.75m apart fixed on
15x10x10cm blocks of cement concrete 1:3:6
(1cement: 3coarse sand: 6graded stone
aggregate 20mm nominal size) - with all labour
and material complete.
065131 30 mm thick Sqm 658.31 0.030
065132 40 mm thick Sqm 721.56 0.030
065133 50 mm thick Sqm 862.10 0.030
065134 75 mm thick Sqm 718.04 0.030
065135 100mm thick Sqm 795.34 0.030
065140 Providing and fixing in cement mortar 1:6
(1cement: 6fine sand) red sand stone slabs 30mm
thick over
Cement
Qty.(qtl.)
065141 Drains Sqm 245.63 0.010
065142 Flue tops Sqm 243.99 0.020
065150 Providing and fixing stone jali 40mm thick
throughout (without sunking and moulding in jali
slab) in cement mortar 1:3 (1cement: 3coarse
1:2 (1white cement : 2stone dust) with an
admixture of pigment, matching stone shade, jali
slab without any chamfers etc.
065160 Extra for laying stone work in or under water cum 243.60
and/or liquid mud including cost of pumping or per m
bailing out water and removing slush etc. depth
complete
065170 Extra for laying stone work in or under foul cum 85.74
position
065180 Wall lining butch work upto 10m height with Sqm 993.43 0.155
Dholpur stone 40mm thick rough facing on the
exposed surface with stone strips of minimum
length 230mm and required width including
embedding every tenth layer and bottom most
layer in masonry or concrete after making
necessary chases of size 75x75mm and by
providing layer of 75mm thick strips including
12mm thick bed of cement mortar 1:3 (1cement:
3coarse sand) including ruled pointing in cement
admixture of pigment to match the shade of stone
complete as per direction of the Engineer-in-
Charge
065190 Stone work for wall lining upto 10m height etc. Sqm 1072.64 0.137
mortar 1:3 (1cement: 3coarse sand) and jointed
with grey cement slurry @ 3.30kg/ Sqm. including
rubbing and polishing complete. (To be secured to
the backing by means of cramps which shall be
paid for separately) Kota stone slabs rough
chiseled, 25mm thick
065200 Stone tile work for wall lining upto 10m height
with special adhesive like araldite or equivalent
over 12mm thick bed of cement mortar 1:3
(1cement: 3coarse sand) including pointing in
white cement with an admixture of pigment to
match the stone shade
065201 8mm thick (mirror polishing and machine cut Sqm 1266.76 0.077
edge) Granite black stone
edge) Granite brown Ruby Red stone
edge) Raj Nagar white stone
Cement
Qty.(qtl.)
065210 Extra for stone work for wall lining on exterior Sqm 47.73
walls of height more than 10m from ground level
for every additional height of 3m or part
065220 Dry rubble masonry in retaining walls, toe walls cum 1283.09
etc.
065230 Bevelling edge in Red Ashlars
065231 Bevelling edge 2.5cmx2.5cm metre 6.06
065240 Bevelling edge in White Ashlars
065250 Cutting groove, rough dressed in masonry
065251 Girth not exceeding 15cm metre 25.20
065252 Girth exceeding 15cm but not exceeding 30cm metre 35.54
065253 Girth exceeding 30cm metre 50.41
065260 Cutting groove, well dressed instead of rough
dressed
065261 Girth not exceeding 15cm metre 38.26
065262 Girth exceeding 15cm but not exceeding 30cm metre 53.97
065263 Girth exceeding 30cm metre 76.52
065270 Drilling or cutting holes in hard stone:
065271 Upto 20 mm dia metre 161.04
065272 Exceeding 20 mm and upto 40 mm dia metre 198.00
065280 Cutting figures/letters in hard stone upto 80 mm Each 19.48
height (depth of cut 6mm)
065290 Extra over item 065280 for cutting figures/letters Each 3.31
in hard stone over 80 mm height for every
additional 20 mm or part thereof.
066010
066020
066030
066040
066050
066060
066070
066080
066090
066100
IR's Unified Standard Schedule Of Rates 2010 Chapter-7 : Wood Work
CHAPTER - 7 : WOOD WORK
Cement
Qty. (qtl.)
FRAMES
071010 Providing wood work in frames of doors, windows,
clerestory windows and other frames and trusses,
wrought, framed and fixed in position :
071011 Second class teak wood cudm 77.18
071012 Sal wood cudm 33.16
071013 Hollock wood or locally available comparable cudm 45.41
species of country wood (to be listed by
respective railway). - Kiln seasoned & chemically
treated
071014 Kail, venteak, pillamarudhu or locally available cudm 30.34
comparable species of good country wood (to be
listed by respective railway)
071020 Providing wood work in frames of false ceiling,
partitions etc. sawn and put up in position
treated
071030 Extra for additional labour for circular works, such
as in frames of fan light
071031 Second class teak wood cudm 7.56
treated
SHUTTERS FOR DOORS AND WINDOWS
072010 Providing and fixing panelled/glazed or panelled
and glazed shutters for doors, windows and
clerestory windows including ISI marked black
enamelled M.S. butt hinges with necessary screws
excluding, panelling/glazing which will be paid for
separately
072011 Second class teak wood, 35mm thick Sqm 2151.52
072012 Second class teak wood, 30mm thick Sqm 1903.09
072013 Kiln seasoned and chemically treated hollock Sqm 1036.51
wood, 35mm thick
Cement
Qty. (qtl.)
072014 Kiln seasoned and chemically treated hollock Sqm 947.92
wood, 30mm thick
072015 Kail, venteak, pillamarudhu or locally available Sqm 1182.70
listed by respective railway). 35mm thick
listed by respective railway). 30mm thick
072020 Providing and fixing panelling/glazing or panelling
and glazing in panelled/ glazed or panelled and
glazed shutters for doors, windows and clerestory
windows (Area of opening for panel inserts
excluding portion inside grooves or rebates to be
measured). Panelling/glazing for panelled/ glazed
or panelled and glazed shutters 25mm to 40mm
thick
072021 Second class teak wood.15mm thick Sqm 1681.59
072022 Hollock wood or locally available comparable Sqm 804.56
treated. 15 mm thick
listed by respective railway) 15 mm thick
072024 Ply wood 5ply 9mm thick. Teak ply on both faces Sqm 1169.49
072025 Ply wood 5ply 9mm thick. Commercial ply on one Sqm 989.20
face and teak ply on other face
072026 Ply wood 7ply 9mm thick. Commercial ply on one Sqm 1037.74
face and teak ply on other face
072030 Providing and fixing paneling and/or glazing in
panelled and/or glazed shutters for doors,
windows and clerestory windows (Area of opening
for panel inserts excluding portion inside grooves
or rebates to be measured). Panelling/glazing for
panelled/ glazed or panelled and glazed shutters
25mm to 40mm thick
072031 Particle board 12mm thick. flat pressed 3layer Sqm 645.64
(like Novapan, Ecoboard etc.) or graded wood
particle board (like Bhutan Board) medium
density Grade-I, IS: 3087 marked
072032 Particle board 12mm thick. Veneered particle Sqm 788.49
board with commercial veneering on both sides
conforming to IS: 3097
072033 Prelaminated particle board 12mm thick, with Sqm 1033.96
decorative lamination on one side and balancing
lamination on other side Grade-I, Type-II IS:
12823 marked
072034 Prelaminated Particle board 12mm thick with Sqm 1110.24
decorative lamination on both sides, Grade-I,
Type-II IS: 12823 marked
Cement
Qty. (qtl.)
072035 Coir veneer board (conforming to IS : 14842- Sqm 933.26
2000) 8mm thick
072036 Coir veneer board (conforming to IS : 14842- Sqm 1120.95
2000) 12mm thick
072037 Glazing with float glass panes 4mm thick Sqm 368.36
(10kg/sqm)
072040 Extra for providing heavy float glass panes Sqm 66.33
13.75kg/ Sqm. (5.5mm thick) instead of ordinary
float glass panes 10kg sqm. (4mm thick), in
doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion
inside rebate shall be measured)
072050 Deduction for providing frosted glass panes Sqm 12.78
10kg/Sqm (4mm thick) instead of ordinary glass
panes 10kg/Sqm (4mm thick) in doors, windows
and clerestory window shutters. (Area of opening
for glass panes excluding portion inside rebate
shall be measured)
072060 Deduct for providing pin headed glass panes Sqm 149.83
instead of ordinary glass panes weighing 10kg/
Sqm. (4mm thick) in doors, windows and
clerestory windows, shutters (Area of opening for
glass panes excluding portion inside rebate shall
be measured)
072070 Providing and fixing 35mm thick framed, ledged
and battened door and window shutters (battens
12mm thick) including bright satin finish or black
stone enamelled iron hinges with necessary
screws, with :
respective railway). - kiln seasoned & chemically
treated
072080 Providing and fixing 35mm thick framed, ledged,
braced and battened door and window shutters
(battens 12mm thick) including bright finished or/
and black enamelled iron hinges with necessary
screws, with :
treated
Cement
Qty. (qtl.)
072090 Providing and fixing wire gauge shutter using
galvanized M.S. wire gauge of average width of
aperture 1.4mm with wire of dia 0.63mm for
doors, windows and clerestory windows including
ISI marked bright finished or black enamelled
M.S. butt hinges with necessary screws
072091 2nd class teak wood.35mm thick Sqm 2380.56
072092 2nd class teak wood 30mm thick Sqm 2139.16
treated.-35mm thick
072094 Locally available comparable species of country Sqm 1157.64
wood (to be listed by respective railway). - kiln
seasoned & chemically treated.-30mm thick
listed by respective railway). - 35mm thick Kail
wood
072100 Extra over Item 072090 for providing SS wire Sqm 148.28
gauge instead of Galvanised MS wire gauge
072110 Deduct from Item no 072020 & 072090 if fixed Sqm 63.89
shutters (without hinges) are provided instead of
openable shutters for doors, windows or
clerestory windows
072120 Extra for providing ISI marked stainless steel butt
hinges instead of black enamelled M.S. butt
hinges with necessary screws. (Shutter area to be
measured)
072121 For 35mm thick shutters Sqm 92.48
072130 Extra for providing ISI marked bright finished
brass butt hinges with screws instead of black
enamelled M.S. butt hinges with necessary
screws. (Shutter area to be measured)
072140 Providing and fixing to IS: 2202 Part-1 marked
flush door shutter decorative type, core of block
board construction with frame of 1st class hard
wood and well matched teak 3ply veneering with
vertical grains or cross bands and face veneers on
both faces of shutters
072141 35mm thick including ISI marked stainless steel Sqm 1812.14
butt hinges with necessary screws
Cement
Qty. (qtl.)
072143 25mm thick (for cupboard) including ISI marked Sqm 1517.00
nickel plated bright finished M.S. piano hinges IS:
3818 marked with necessary screws
072150 Providing and fixing flush door shutters to IS:
2202 Part-I non-decorative type, core of block
board construction with frame of 1st class hard
wood and well matched commercial 3ply
veneering with vertical grains or cross bands and
face veneers on both faces of shutters
072153 25mm thick (for cupboard) including ISI marked Sqm 1052.40
nickel plated bright finished M.S. piano hinges
with necessary screws
072160 Extra for providing and fixing flush doors with Sqm 272.95
teak veneering on one side in item No.072150
072170 Extra for providing lipping with 2nd class teak Sqm 519.77
wood battens 25mm minimum depth on all edges
of shutters (over all area of door shutters to be
measured)
072180 Extra for providing vision panel not exceeding 0.1
sqm in all type of flush door shutters including
providing and fixing glass panes in the panel.
area of vision panel to be measured
072181 Rectangular or square Sqm 158.54
072182 Circular Sqm 223.01
072190 Extra if louvers (not exceeding 0.2Sqm) are
provided in flush door shutters (overall area of
door shutters to be measured)
072191 (a) In 2nd class teak wood Sqm 452.99
072192 b) In commercial quality timber Sqm 377.49
072200 Extra for cutting rebate in flush door shutters Sqm 138.51
(total area of the shutters to be measured)
072210 Providing and fixing magic eye piece 25mm size Each 267.73
in all type of door shutters
Shutters With Cupboard etc.
073010 Providing and fixing 25mm thick panelled or
panelled and glazed shutters for cup board etc.
including ISI marked black enamelled MS butt
hinges with necessary screws ( Panelling &
glazing with 4mm float glass)
073011 Second class teak wood Sqm 2217.56
073020 Providing and fixing 25mm thick glazed shutters
for cup board etc. including ISI marked black
stone enamelled MS hinges with necessary screws
including glazed panels with 4mm float glass
073021 Second class teak wood Sqm 2011.32
Cement
Qty. (qtl.)
073030 Providing and fixing 25mm thick cup board Sqm 2139.12
shutters , with prelaminated flat pressed 3 layer
particle board conforming to IS 12823 -Grade I,
having one side decorative lamination of
approved shade and other side balancing
lamination including second class teak wood
lipping 25x12mm thick with necessary screws and
nickel plated bright finished MS piano hinges
073040 complete
Providing and fixing 25mm thick cup board
shutters , with veneered particle board
conforming to IS 3097 - Grade1 of approved
make including second class teak wood lipping
25x12mm thick with necessary screws and nickel
plated bright finished MS piano hinges complete
073041 With teak veneering on one side and commercial Sqm 2526.28
veneering on other side
073042 With commercial veneering on both sides Sqm 1816.48
073050 Extra if ISI marked anodised aluminium butt Sqm 158.79
hinges with necessary screws are used in place of
ISI marked black enamelled MS butt hinges with
necessary screws
MISCELLANEOUS – WOOD WORK :
074010 Providing 50x50x50mm 2nd class teak wood Each 13.96 0.001
plugs including cutting brick work and fixing in
cement mortar 1:3 (1cement: 3fine sand) and
making good the walls etc.
074020 Providing and fixing expandable fasteners of
specified size with necessary plastic sleeves and
galvanized M.S. screws including drilling holes in
masonry work/ CC/ R.C.C. and making good etc.
complete
074021 25mm long Each 11.32
074022 32mm long Each 13.86
074023 40mm long Each 17.35
074024 50mm long Each 18.12
074030 Providing and fixing 2nd class teak wood plain
lining tongued and grooved, including wooden
plugs complete with necessary screws and
priming coat on unexposed surface
074031 25mm thick Sqm 2564.38 0.001
074032 20mm thick Sqm 2044.24 0.001
074033 12mm thick Sqm 1300.23 0.001
074040 Providing and fixing flat pressed 3 layer particle
board medium density exterior grade (Grade-I)
(like Novapan, Ecoboard etc.) or graded wood
particle board (like Bhutan Board) IS: 3087
marked, to frame, backing or studding with
screws etc. complete (frame, backing or studding
to be paid separately)
Cement
Qty. (qtl.)
074041 12mm thick Sqm 443.59
074042 18mm thick Sqm 461.88
074050 Providing & fixing prelaminated particle board
with one side decorative & other side balancing
lamination Grade-I, Type-II IS: 12823 marked in
shelves with screws and M.S. or aluminium
brackets wherever required, edges to be painted
with polyurethene primer (Brackets to be paid
separately)
074051 18mm thick Sqm 987.55
074052 25mm thick Sqm 1060.72
074060 Providing and fixing in wall lining flat pressed
three layer (medium density) particle board
prelaminated one side decorative lamination on
other side balancing lamination Grade-I, Type-II,
IS: 12823 marked including priming coat on
unexposed surface, with necessary fixing
arrangement and screws etc. complete
074061 12mm thick Sqm 1057.07
074062 18mm thick Sqm 1184.83
074063 25mm thick Sqm 1261.49
074070 Providing and fixing specified wood frame work
consisting of battens 50x25mm fixed with rawl
plug and drilling necessary holes for rawl plugs
etc. including priming coat complete
treated
listed by respective railway).
074080 Providing and fixing plywood plain lining with
necessary screws, priming coat on unexposed
surface etc. complete with :
074081 4mm thick Decorative ply facings of approved Sqm 925.93
manufacturer
074082 3mm thick Decorative ply facings of approved Sqm 597.22
manufacturer
074083 3mm thick commercial ply lining of approved Sqm 479.45
manufacturer
074084 6mm thick commercial ply lining of approved Sqm 586.77
manufacturer
074090 Providing and fixing 4mm thick coir veneer board, Sqm 700.22
ISI marked IS: 14842- 2000, plain lining with
necessary screws, priming coat on unexposed
surface etc. complete
Cement
Qty. (qtl.)
074100 Providing and fixing plain non-asbestos cement Sqm 439.51
sheet 6mm thick (high pressure steam cured as
per IS:14862-2000) in partitions including fixing
to frames with brass screws etc., complete with
50mm x 12mm deodar wood beading (frames to
be paid separately)
074110 Providing and fixing wooden planks in floors,
shelves, lofts, decking of bridges, etc., with Kail,
venteak, pillamarudhu or locally available
listed by respective Railways)
074111 25mm thick Sqm 774.28
074112 30mm thick Sqm 882.69
074113 35mm thick Sqm 1052.51
074114 40mm thick Sqm 1180.28
074115 50mm thick Sqm 1487.49
074120 Providing and fixing skirting of prelaminated with
(one side decorative and other side balancing
lamination) flat pressed, three layer (like
Novapan, Ecoboard etc.) or graded particle board
(like Bhutan Board) (medium density) Grade-I,
Type-II, IS: 12823 marked with necessary fixing
arrangements and screws including drilling
necessary holes for rawl plugs etc. and priming
coat on unexposed surface complete
047121 18mm thick Sqm 1073.58
074122 25mm thick Sqm 1150.24
074130 Providing and fixing wooden moulded beading to
door and window frames with iron screws, plugs
and priming coat on unexposed surface etc.
complete
074131 2nd class teak wood, 50x12mm metre 82.62
074132 2nd class teak wood, 50x20mm metre 116.95
074133 Hollock wood or locally available comparable metre 51.19
treated, 50x12mm
074134 Hollock wood or locally available comparable metre 64.28
treated, 50x20mm
074140 Providing and fixing plain jaffri of 35x10mm laths Sqm 584.54
placed 35mm apart (frames to be paid separately)
including fixing 50x12mm beading complete with:
Kail, venteak, pillamarudhu or locally available
Cement
Qty. (qtl.)
074150 Providing and fixing 18mm thick, 150mm wide metre 275.27 0.000
pelmet of flat pressed 3 layer (like Novapan,
Ecoboard etc.) or graded wood particle board (like
Bhutan board) medium density grade-I, IS: 3087
marked including top cover of 6mm commercial
ply wood, nickel plated M.S. pipe 20mm dia
(heavy type) curtain rod with nickel plated
brackets including fixing with 25x3mm M.S. flat
10cm long and rawl plugs 50mm long
(designation 10No.) etc. all complete
074160 Extra for using veneered particle board in item of metre 85.49
pelmet 18mm thick 150mm wide
074170 Providing and fixing 18mm thick, 150mm wide
pelmet of coir veneer board ISI marked IS: 14842-
2000, including top cover of 6mm coir veneer
board, nickel plated M.S. pipe 20mm dia (heavy
type) curtain rod with nickel plated brackets
including fixing with 25x3mm M.S. flat 10cm long
and rawl plugs 50mm long (designation 10No.)
etc. all complete
074171 Commercial veneering on both sides metre 397.31 0.000
074172 Teak veneering on both sides metre 467.93 0.000
074180 Providing and fixing 12mm thick and 150mm wide
wooden pelmets with 25mm dia wooden curtain
rod and brackets including fixing with MS flat and
plugs etc with painting or oiling as required all
labour and material as a complete job
074181 With 2nd class teak wood metre 291.86 0.000
074182 With Kail, venteak, pillamarudhu or locally metre 144.14 0.000
available comparable species of good country
wood (to be listed by respective railway).
074190 Extra to Item for providing in pelmet brass
curtain rods of 1.25mm thick brass plate with
brackets instead of 25mm dia. wooden curtain
rods
074191 12mm dia metre of 108.89 0.000
pelmet
074192 20mm dia metre of 127.18 0.000
pelmet
074193 25mm dia metre of 196.34 0.000
pelmet
074200 Providing and fixing teak wood lipping of size metre 34.01
25x3mm
074210 Providing and fixing curtain rods of 1.25mm thick
chromium plated brass plate, with two chromium
plated brass brackets fixed with C.P. brass screws
and wooden plugs etc. wherever necessary
complete
074211 12mm dia. metre 324.30 0.000
074212 20mm dia. metre 392.54 0.000
074213 25mm dia. metre 578.38 0.000
Cement
Qty. (qtl.)
074220 Providing and fixing nickel plated M.S. pipe
curtain rods with nickel plated brackets
074221 20mm dia (heavy type) metre 118.54 0.000
074222 50mm dia (heavy type) metre 255.99 0.000
074230 Providing and fixing M.S. grills of required pattern
in frames of windows etc. with M.S. flats, square
or round bars etc. all complete
074231 Fixed to steel windows by welding Kg 67.82
074232 Fixed to opening/ wooden frames with rawl plugs Kg 69.56
screws etc.
074240 Providing and fixing expanded metal 20x60mm
strands 3.25mm wide and 1.6mm thick for
windows etc.
074241 With 50x20mm 2nd class teak wood beading Sqm 667.40
074242 With 50x20mm Deodar wood beading Sqm 537.31
074250 Providing and fixing hard drawn steel wire fabric
75x25mm mesh of weight not less than 7.75kg
sqm. to windows frames etc.
074251 With 50x20mm 2nd class teak wood beading Sqm 801.96
074252 With 50x20mm 2nd class Deodar wood beading Sqm 661.67
074260 Providing and fixing fly proof galvanized M.S. wire
gauge to windows and clerestory windows using
galvanized M.S. wire gauge with average width of
aperture 1.4mm in both directions with wire of dia
0.63mm
074261 With 2nd class teak wood beading 50x20mm Sqm 615.53
074262 With 12mm mild steel U beading Sqm 364.00
074263 With Deodar wood beading 50x20mm Sqm 456.00
074270 Deduction for fixing 75x25mm hard drawn steel Sqm 41.81
wire fabric of weight not less than 7.75kg sqm. in
panelled and glazed door and window shutters in
lieu of 4mm glass glazing
074280 Providing 40x5mm flat iron hold fast 40cm long Each 59.42 0.011
including fixing to frame with 10mm diameter
bolts, nuts and wooden plugs and embeddings in
cement concrete block 30x10x15cm 1:3:6 mix
074290 Providing beams including hoisting, fixing in
position and applying wood preservative for the
unexposed surface etc. complete, with :
074291 Sal wood Cum 39679.70
074292 Hollock wood or locally available comparable Cum 39669.14
treated
074293 Kail, venteak, pillamarudhu or locally available Cum 26012.99
074294 2nd class teak wood Cum 71269.68
Cement
Qty. (qtl.)
074295 Deodar wood Cum 51484.69
074300 Providing and fixing float glass panes with putty
and nails including removal of old broken panes
wherever required
074301 Float Glass panes 4mm thick (10kg /sqm) Sqm 560.35
074302 Frosted glass panes 4mm thick (10kg /sqm) Sqm 546.29
074303 Heavy sheet glass panes 5.5mm thick (13.75 Sqm 591.01
Kg/sqm)
074310 Providing and fixing float glass panes with 12mm
wooden beading including removal of old broken
panes and old wooden beading wherever
necessary
074311 Float Glass panes 4mm thick (10Kgs/Sqm) Sqm 572.06
074312 Frosted glass panes 4mm thick (10Kgs/sqm) Sqm 558.00
074313 Heavy sheet glass panes 5.5mm thick (13.75 Sqm 602.72
Kg/sqm)
074320 Providing, erecting and fixing sal ballies in posts,
purlins, rafters, etc., including cost of iron nails
and spikes required and supplying & applying
wood preservative to exposed surfaces :
074321 80mm dia ballies metre 118.17
074324 150mm dia Sal ballies metre 196.61
074325 80mm dia Eucalyptus ballies metre 41.10
074330 Providing, erecting and fixing Ballies of locally
available species approved by the zonal railway in
posts, purlins, rafters, etc., including cost of iron
nails and spikes required, and supplying and
applying wood preservative to exposed surfaces
Note : The diameter shall be the average
diameter as measured at the centre of balli.
074340 Providing and fixing rafters, purlins, ridges, posts, cum 73476.49
hips, wall plates, hand rails in staircase, etc.,
with:-2nd class teak wood
074350 Providing and fixing decorative laminated plastic
veneers of approved quality and make (e.g.
Sunmica, formica or equivalent) over wooden
surfaces, including smoothening of wooden
surface and fixing of veneers with approved
synthetic resin adhesive, complete
Cement
Qty. (qtl.)
074351 1 mm thick Sqm 259.40
074352 0.8mm thick Sqm 227.27
074353 0.6mm thick Sqm 188.16
074360 Providing and fixing Teak wood veneer sheet of
approved quality and make over wooden surfaces,
including smoothening of wooden surface, and
fixing of veneers with approved synthetic resin
adhesive, complete
074361 3 mm thick Sqm 269.08
074362 2.5mm thick Sqm 243.92
074363 2mm thick Sqm 209.07
M.S. FITTINGS - BRIGHT SATIN FINISH :

075010 Providing and fixing M.S. pressed butt hinges
generally conforming to IS:1341, bright satin
finish with necessary screws etc. complete of size
075011 125x65x2.12 mm Each 29.90
075012 100x58x1.90mm Each 25.51
075013 75x47x1.70mm Each 17.84
075014 50x37x1.50mm Each 8.58
075020 Providing and fixing MS pressed Parliament
hinges generally conforming to IS:362 bright
finished with necessary screws etc. complete of
075021 size
150x125x27x2.50 mm Each 76.25
075022 125x125x27x2.50 mm Each 64.13
075023 100x125x27x2.50 mm Each 53.91
075024 75x100x20x2.40 mm Each 41.28
075030 Providing and fixing M.S. single acting spring
hinges bright satin finish with necessary screws
etc. complete of size
075031 150mm Each 173.19
075032 125mm Each 165.41
075033 100mm Each 137.94
075040 Providing and fixing M.S. double acting spring
hinges generally conforming to IS: 453, bright
satin finish with necessary screws etc. complete
of size
075041 150mm Each 183.87
075042 125mm Each 160.95
075043 100mm Each 136.37
075050 Providing and fixing M.S. sliding door bolts
generally conforming to IS: 281, bright satin
finish or black stone enamelled with nuts and
screws etc. complete of size
075051 300x16 mm Each 149.43
075052 250x16 mm Each 130.75
Cement
Qty. (qtl.)
075060 Providing and fixing M.S. tower bolts generally
conforming to IS:204 (Part I) with necessary
screws etc. complete of size.
075061 250x10 mm Each 69.66
075062 200x10 mm Each 60.41
075063 150x10 mm Each 48.48
075064 100x10 mm Each 41.81
075070 Providing and fixing M.S. door handles with
necessary screws etc. complete.
075071 125mm Each 20.91
075072 100mm Each 17.78
075073 75mm Each 13.66
075080 Providing and fixing MS hooks and eyes
075081 300mm Each 21.45
075082 250mm Each 18.69
075083 200mm Each 16.28
075084 150mm Each 13.00
075085 100mm Each 10.45
075090 Providing and fixing M.S. fan light pivot with Each 38.30
075100 Providing and fixing M.S. fan light catch with Each 31.07
075110 Providing and fixing M.S. hasp and staple (Safety
type) with necessary screws etc. complete.
075111 150mm Each 25.81
075112 115mm Each 21.94
075113 90mm Each 17.80
075120 Providing and fixing 300mm long M.S. chain with Each 17.93
hook for fan light including necessary screws etc.
complete.
075130 Providing and fixing M.S. casement stays (straight
peg type) with necessary screws etc. complete.
075131 300mm weighing not less than 200 gm Each 42.64

075140 Providing and fixing ISI -1378 marked oxidised
M.S. pressed butt hinges with necessary screws
etc. complete, of size.
075141 125x65x2.12 mm Each 34.10
075142 100x58x1.90mm Each 25.30
075143 75x47x1.70mm Each 18.87
075144 50x37x1.50mm Each 12.72
075150 Providing and fixing ISI-1378 marked oxidised
M.S. pressed parliamentary hinges with necessary
075151 150x125x27x2.80 mm Each 75.13
Cement
Qty. (qtl.)
075152 125x125x27x2.80 mm Each 63.08
075153 100x125x27x2.80 mm Each 52.86
075154 75x100x20x2.24 mm Each 40.29
075160 Providing and fixing ISI -1378marked oxidised
M.S. single acting spring hinges with necessary
075161 150mm Each 172.37
075162 125mm Each 164.53
075163 100mm Each 136.96
075170 Providing and ISI -1378marked fixing oxidised
M.S. double acting spring hinges with necessary
screws etc. complete of size
075171 150 Each 183.11
075172 125 Each 160.17
075173 100 Each 135.21
075180 Providing Copper oxidized M.S. Piano hinges ISI
marked IS: 3818 finished with nickel plating and
fixing with necessary screws etc. complete
075181 Overall width 35mm metre 113.05
075190 Providing and fixing ISI marked Copper oxidized
M.S. sliding door bolts with nuts and screws etc.
complete of size
075191 300x16 mm Each 147.51
075192 250x16 mm Each 131.70
075200 Providing and fixing ISI -1378marked oxidised
M.S. tower bolts black finish (Barrel type) with
necessary screws etc. complete of size.
075201 250x10 Each 70.93
075202 200x10 Each 81.01
075203 150x10 Each 68.21
075204 100x10 Each 42.51
075210 Providing and fixing ISI 1378 marked 85x42mm Each 46.56
oxidised M.S. pull bolt lock conforming to IS:
7534 with necessary screws bolts, nuts and
washers etc. complete
075220 Providing and fixing ISI marked oxidised M.S.
door latches conforming to IS: 5930 with screws
etc. complete
075221 300x20x6mm Each 84.45
075222 250x20x6mm Each 58.32
075230 Providing and fixing ISI marked oxidised M.S.
handles conforming to IS: 4992 - with necessary
screws etc- of size
075231 125 mm Each 22.09
075232 100 mm Each 17.14
Cement
Qty. (qtl.)
075233 75 mm Each 13.85
075240 Providing and fixing ISI-1378 marked copper Each 38.31
oxidised M.S. fan light pivot with necessary
screws etc. complete
075250 Providing and fixing ISI-1378 marked copper Each 31.48
oxidised M.S. fan light catch with necessary
075260 Providing and fixing 300mm long oxidised M.S. Each 20.09
chain with hook for fan light including necessary
075270 Providing and fixing oxidised M.S. hasp and staple
(Safety type) conforming to IS : 363 - with
necessary screws etc. complete of size -
075271 150 mm Each 25.94
075272 115 mm Each 22.07
075273 90 mm Each 17.98
075280 Providing and fixing IS-1378 marked copper
oxidised M.S. casement stays (straight peg type)
with necessary screws etc. complete
075281 300mm weighing not less than 200gms Each 27.46
075290 Providing and fixing oxidised M.S. safety chain Each 68.54
with necessary fixtures for doors (weighing not
less than 450gms.)
STAINLESS STEEL FITTINGS :
076010 Providing and fixing ISI: 12817 marked stainless

steel butt hinges with stainless steel screws etc.
complete of size
076011 125x64x1.90 mm Each 60.52
076012 100x58x1.90mm Each 43.33
076013 75x47x1.80mm Each 30.68
076014 50x37x1.50mm Each 17.84
076020 Providing and fixing ISI: 12817 marked stainless
steel butt hinges (heavy weight) with stainless
steel screws etc. complete
076021 125x64x2.50mm Each 64.00
076022 100x60x2.50mm Each 55.91
076023 75 x50x2.50mm Each 39.10
BRASS FITTINGS - BRIGHT SATIN FINISH :

077010 Providing and fixing bright finished brass butt
hinges with necessary screws etc. complete
077011 125x85x5.5mm (heavy type) Each 239.90
077012 125x70x4mm (ordinary type) Each 106.33
Cement
Qty. (qtl.)
077015 75x65x4mm (heavy type) Each 94.39
077016 75x40x2.5mm (ordinary type) Each 51.99
077020 Providing and fixing bright finished brass
parliamentary hinges with necessary screws etc.
complete
077021 150x125x27x5mm Each 307.53
077022 125x125x27x5mm Each 278.79
077023 100x125x27x5mm Each 239.58
077024 75x100x20x3.2mm Each 188.10
077030 Providing and fixing bright finished brass single
acting spring hinges with necessary screws etc.
complete of size
077031 150mm Each 491.12
077032 125mm Each 409.82
077033 100mm Each 320.35
077040 Providing and fixing bright finished brass double
complete of size -
077041 150mm Each 600.64
077042 125mm Each 538.79
077043 100mm Each 436.54
077050 Providing and fixing bright finished brass sliding
doors bolts - with screws etc. complete of size
077051 300x16mm Each 301.67
077052 250x16mm Each 275.54
077060 Providing and fixing bright finished brass tower
bolts (barrel type) with necessary screws etc.
complete
077061 250x10mm Each 312.54
077062 200x10mm Each 262.88
077063 150x10mm Each 207.71
077064 100x10mm Each 133.57
077070 Providing and fixing bright finished brass handles -
with screws etc. complete - of size
077071 125 mm Each 196.32
077072 100mm Each 79.01
077073 75 mm Each 67.40
077080 Providing and fixing bright finished brass door
latch with necessary screws etc. complete
077081 300x16x5mm Each 277.60
077082 250x16x5mm Each 258.82
077090 Providing and fixing bright finished brass 100mm Each 891.68
mortice latch and lock with 6 levers and a pair of
lever handles with necessary screws etc.
complete (best make of approved quality)
Cement
Qty. (qtl.)
mortice latch with one dead bolt and a pair of
077110 Providing and fixing bright finished brass night Each 631.79
latch including necessary screws etc. complete
(best make of approved quality)
077120 Providing and fixing special quality bright finished
brass cupboard or ward robe locks with four
levers including necessary screws etc. complete
077121 40mm Each 96.05
077122 50mm Each 101.86
077123 65mm Each 118.12
077124 75mm Each 142.51
077130 Providing and fixing 50mm bright finished brass Each 50.82
cup board or ward robe knob with necessary
screws (best make of approved quality)
077140 Providing and fixing bright finished brass hanging Each 65.80
type floor door stopper with necessary screws etc.
complete
077150 Providing and fixing bright finished brass fan light Each 32.35
pivot with necessary screws etc. complete
077160 Providing and fixing bright finished brass fan light Each 35.49
catch with necessary screws etc. complete
077170 Providing and fixing bright finished brass hasp
and staple (safety type) with necessary screws
etc. complete
077171 150mm Each 110.58
077172 115mm Each 86.53
077173 90mm Each 74.53
077180 Providing and fixing IS: 3564 marked aluminium Each 654.22
die cast body tubular type universal hydraulic
door closer, hardwyn make (Classic Queen) or
equivalent with necessary accessories and screws
etc. complete
077190 Providing and fixing IS: 3564 marked aluminium
extruded section body tubular type universal
hydraulic door closer with double speed
adjustment with necessary accessories and
077191 Hardwyn make (Eddy) or equivalent Each 1234.97
077192 Hardwyn make (Mytel) or equivalent Each 1089.78
077193 Hardwyn make (Gazel) or equivalent Each 1336.60
077200 Providing and fixing bright finished brass Each 62.89
casement window fastener with necessary screws
etc. complete
Cement
Qty. (qtl.)
077210 Providing and fixing bright finished brass
casement (straight peg type) with necessary
077220 Providing and fixing nickel chromium plated brass
butt hinges with necessary screws etc. complete
077230 Providing and fixing Nickel chromium plated brass
complete
077231 150x125x27x5mm Each 256.77
077232 125x125x27x5mm Each 223.06
077233 100x125x27x5mm Each 188.22
077234 75x100x20x3.2mm. Each 150.01
single acting spring hinges with necessary screws
etc. complete :
077241 150mm Each 384.11
077242 125mm Each 346.36
077243 100mm Each 234.68
double acting spring hinges with necessary
screws etc. complete :
077251 150mm Each 607.74
077252 125mm Each 456.16
077253 100mm Each 400.19
sliding doors bolts and screws etc. complete :
077261 300x16mm Each 317.34
077262 250x16mm Each 262.17
tower bolts (barrel type) with necessary screws
etc complete :
077271 250x10mm Each 207.61
077272 200x10mm Each 170.24
077273 150x10mm Each 128.99
077274 100x10mm Each 112.55
handles with necessary screws etc. complete
Cement
Qty. (qtl.)
077281 125mm Each 268.41
077282 100mm Each 227.75
077283 75mm Each 220.01
077290 Providing and fixing chromium plated brass door
077291 300x16x5mm Each 171.47
077292 250x16x5mm Each 171.47
077300 Providing and fixing nickel chromium plated brass Each 32.74
fan light pivot with necessary screws etc.
complete
fan light catch with necessary screws etc.
complete
hasp and staple (safety type) with necessary
077321 150mm Each 90.63
077322 115mm Each 69.80
077323 90mm Each 60.45
077330 Providing and fixing chromium plated brass Each 702.36
100mm mortice latch and lock with 6 levers and a
pair of lever handles with necessary screws etc.
077340 Providing and fixing chromium plated brass Each 562.23
100mm mortice latch with one dead bolt and a
077350 Providing and fixing chromium plated brass night Each 774.08
077360 Providing and fixing special quality chromium
plated brass cup board locks with six levers
including necessary screws etc. complete (best
make of approved quality) of :
077361 Size 40mm Each 90.24
077362 Size 50mm Each 104.76
077363 Size 65mm Each 119.28
077364 Size 75mm Each 136.70
50mm cupboard or wardrobe knobs with nuts
complete
hanging type floor door stopper with necessary
etc. complete
Cement
Qty. (qtl.)
casement stays (straight peg type) with
necessary screws etc. complete
077410 Providing and fixing copper oxidised brass butt
hinges with necessary screws etc. complete
077420 Providing and fixing copper oxidised brass
complete
077421 150x125x27x5mm Each 305.12
077422 125x125x27x5mm Each 291.01
077423 100x125x27x5mm Each 244.26
077424 75x100x20x3.2mm Each 175.15
077430 Providing and fixing copper oxidised brass single
complete :
077431 150mm Each 433.91
077432 125mm Each 339.25
077433 100mm Each 266.61
077440 Providing and fixing copper oxidised brass double
complete :
077441 150mm Each 477.56
077442 125mm Each 430.13
077443 100mm Each 347.05
077450 Providing and fixing copper oxidised brass sliding
doors bolts and screws etc. complete :
077451 300x16mm Each 195.56
077452 250x16mm Each 177.85
077460 Providing and fixing copper oxidised bras tower
bolts (barrel type) with necessary screws etc
complete :
077461 250x10mm Each 275.54
077462 200x10mm Each 231.08
077463 150x10mm Each 174.95
077464 100x10mm Each 119.78
Cement
Qty. (qtl.)
handles with necessary screws etc. complete
077471 125mm Each 140.79
077472 100mm Each 118.72
077473 75mm Each 105.09
077480 Providing and fixing copper oxidised brass door
077481 300x16x5mm Each 160.52
077482 250x16x5mm Each 156.65
077490 Providing and fixing copper oxidised brass fan Each 37.05
light pivot with necessary screws etc. complete
077500 Providing and fixing copper oxidised brass fan Each 30.46
light catch with necessary screws etc. complete
077510 Providing and fixing copper oxidised brass hasp
and staple (safety type) with necessary screws
etc. complete
077511 150mm Each 81.02
077512 115mm Each 77.46
077513 90mm Each 62.76
077520 Providing and fixing copper oxidised brass Each 726.06
100mm mortice latch and lock with 6 levers and a
100mm mortice latch with one dead bolt and a
077540 Providing and fixing copper oxidised brass night Each 674.39
077550 Providing and fixing special quality copper
oxidised brass cup board locks with six levers
including necessary screws etc. complete (best
make of approved quality) of :
077551 Size 40mm Each 288.97
077552 Size 50mm Each 299.62
077553 Size 65mm Each 337.37
077554 Size 75mm Each 366.40
077560 Providing and fixing copper oxidised brass 50mm Each 98.29
cupboard or wardrobe knobs with nuts complete
hanging type floor door stopper with necessary
etc. complete
Cement
Qty. (qtl.)
casement stays (straight peg type) with
necessary screws etc. complete
077600 Providing and fixing magnetic catcher ISI marked Each 23.66
ALUMINIUM FITTING - (ANODISED)
GYPBOARD
078010 Providing and fixing ISI marked aluminium butt
hinges ISI marked anodised (anodic coating not
less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade
078011 125x75x4mm Each 119.88
078012 125x63x4mm Each 114.65
078013 100x75x4mm Each 101.24
078014 100x63x4mm Each 89.63
078015 100x63x3.2mm Each 95.00
078016 175x63x4mm Each 68.15
078017 75x63x3.2mm Each 58.34
078018 75x45x3.2mm Each 38.01
Note : Aluminium hinges shall not be used in
wooden shutters, stainless hinges shall be
preferred
078020 Providing and fixing aluminium sliding door bolts
ISI marked anodised (anodic coating not less
than grade AC 10 as per IS: 1868) transparent or
dyed to required colour or shade with nuts and
078021 300x16mm Each 261.70
078022 250x16mm Each 215.24
078030 Providing and fixing aluminium tower bolts ISI
marked anodised (anodic coating not less than
grade AC 10 as per IS: 1868) transparent or dyed
to required colour or shade with necessary screws
etc. complete
078031 300x10mm Each 90.19
078032 250x10mm Each 69.86
078033 200x10mm Each 65.21
078034 150x10mm Each 58.36
078035 100x10mm Each 48.72
078040 Providing and fixing aluminium pull bolt lock Each 58.18
anodised ISI marked (anodic coating not less
than grade AC 10 as per IS: 1868) transparent or
dyed to required colour and shade with necessary
Cement
Qty. (qtl.)
078050 Providing and fixing 50cm long aluminium kicking Each 126.38
plate 100x3.15mm anodised (anodic coating not
transparent or dyed to required colour or shade
078060 Providing and fixing aluminium handles ISI
marked anodised (anodic coating not less than
grade AC 10 as per IS: 1868) transparent or dyed
to required colour or shade with necessary screws
etc. complete
078061 125mm Each 53.40
078062 100mm Each 46.33
078063 75mm Each 37.96
078070 Providing and fixing aluminium hanging floor door
stopper ISI marked anodised (anodic coating not
transparent or dyed to required colour and shade
078071 Single rubber stopper Each 27.73
078072 Twin rubber stopper Each 74.19
078080 Providing and fixing aluminium casement stays Each 62.83
250mm long ISI marked anodised (anodic coating
not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour and shade
mortic latch and lock ISI marked with six levers
and a pair of anodised (anodic coating not less
than grade AC 10 as per IS: 1868) aluminium
078100 Providing and fixing aluminium tee channels metre 61.65
(heavy duty) with rollers, stop end in pelmets as
curtain rod
Cement
Qty. (qtl.)
078110 Providing and fixing partition upto 2.40m height Sqm 1102.71
having composite thickness of 67mm consisting of
frame and double skin 8.5mm thick Glass
Reinforced Gypsum (GRG) board manufactured by
spray suction technique with high strength plaster
of paris conforming to IS: 8272 and glass fibre of
E-glass or A-glass or N-glass in the form of
rovings, not less than 2.5% by weight of plaster
of paris and conforming to IS: 11320 including
providing and fixing of frame work made of
special section power pressed from MS sheet and
galvanised with zinc coating of Grade 175 and
consisting of floor and ceiling channel 50mm wide
having equal flanges of 32mm width 0.50mm
thick fixed to floor/ ceiling at spacing of 610mm
centre to centre with dash fastener of 12.5mm
diameter 40mm length and the studs 48mm wide
contd...
contd.- having one flange of 34mm and another
flange 36mm and 0.50mm thick fixed vertically
within flanges of floor and ceiling channel and
placed at a spacing of 610mm centre to centre by
6mm dia bolts and nuts at both ends of partition
fixed flush to wall with rawl plugs at the spacing
of 450mm centre to centre and fixing of GRG
boards to either side of frame work by 20mm long
drive all screws on studs, floors and ceiling
channels at the spacing of 300mm centre to
centre, including jointing and finishing to a flush
finish with recommended joint filler, joint paper
tap and joint finisher and two coats of primer
suitable for GRG board as per manufacturers
specifications all complete.
078120 Providing and fixing partition upto 2.40m height Sqm 1604.49
having composite thickness of 89mm consisting of
frame and double skin 8.5mm thick Glass
Reinforced Gypsum (GRG) board manufactured by
spray suction technique with high strength plaster
of paris conforming to IS: 8272 and glass fibre of
E-glass or A-glass or N-glass in the form of
rovings, not less than 2.5% by weight of plaster
of paris and conforming to IS: 11320 including
special section power pressed from MS sheet and
galvanised with zinc coating of Grade 175 and
consisting of floor and ceiling channel 72mm wide
having equal flanges of 32mm width 0.50mm
thick fixed to floor/ ceiling at the spacing of
610mm centre to centre with dash fastener of
12.5mm diameter 40mm length and the studs
70mm wide having one flange of 34mm -contd....
Cement
Qty. (qtl.)
contd.- and another flange 36mm and 0.50mm
thick fixed vertically within flanges of floor and
ceiling channel and placed at a spacing of 610mm
centre to centre by 6mm dia bolts and nuts at
both ends of partition fixed flush to wall with rawl
plugs at the spacing of 450mm centre to centre
and fixing of GRG boards to either side of frame
work by 20mm long drive all screws on studs,
floors and ceiling channels at the spacing of
300mm centre to centre, including jointing and
finishing to a flush finish with recommended joint
filler, joint paper tap and joint finisher and two
coats of primer suitable for GRG board as per
manufacturers specifications all complete
078130 Providing and fixing factory made P.V.C. door metre 411.88
frame of size 50x47mm with a wall thickness of
5mm, made out of extruded 5mm rigid PVC foam
sheet mitered at corners and joined with 2 Nos. of
150mm long brackets of 15x15mm M.S. square
tube, the vertical door profiles to be reinforced
with 19x19mm M.S. square tube of 19 gauge,
EPDM rubber gasket weather seal to be provided
through out the frame. The door frame to be fixed
to the wall using M.S. screws of 65/100mm size
complete as per manufacturers specification and
direction of Engineer-in-Charge
078140 Providing and fixing to existing door frames Sqm 2670.95
30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19
gauge thickness and size of 19mm x 19mm for
styles and 15x15mm for top & bottom rails. M.S
.frame shall have a coat of steel primers. M.S.
frame covered with 5mm thick heat moulded PVC
Foam sheet ‘C channel as per drawing given in IR
Standard Specifications complete in all respect
078150 Providing and fixing to existing door frames Sqm 3241.98
30mm thick factory made solid both side
prelaminated panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge
thickness and size of 19mm x 19mm for styles
and15x15mm, top & bottom rails. M.S. frame
shall have a coat of steel primers of approved
make and manufacture. M.S. frame covered with
5mm thick heat moulded prelaminated PVC Foam
Sheet ‘C channel as per drawing given in IR
Standard Specifications complete in all respect
Cement
Qty. (qtl.)
078160 Supplying, providing and fixing white colour Sqm 5539.19
sliding uPVC Window complete, consisting of uPVC
frame of size 80mm x 52mm and uPVC shutter of
size 54mm x 38mm with 1.2mm thick GI section
reinforcement wherever required, produced by
ISO 9001:2000 and ISO 14001:2004 certified
company. Window shutter will consist either of
5mm thick float glass or galvanised wire gauge
alongwith complete fittings, e.g. pulley/rollers,
transmission gear and handle for operating
window
078170 Supplying, providing and fixing white colour Sqm 5946.98
sliding uPVC Door complete, consisting of uPVC
frame of size 95mm x 60mm and uPVC shutter of
size 66mm x 42mm with 1.2mm thick GI section
reinforcement wherever required, produced by
ISO 9001:2000 and ISO 14001:2004 certified
company. Door shutter will consist either of 5mm
thick float glass or galvanised wire gauge or solid
PVC panel alongwith complete fittings, e.g.
pulley/rollers, transmission gear and handle for
operating door
078180 Providing and fixing to existing door frame 24mm Sqm 1427.54
thick factory made PVC door shutters made of
styles and rails of a PVC hollow section of size
59mm x 24mm with a wall thickness
2mm±0.2mm. The styles and rails mitered cut
and joined at corners by means of M.S.
galvanized /plastic brackets of size 75mm x
220mm having wall thickness 1.0mm/solid and fix
with stainless steel screws. The styles of shutter
reinforced by inserting galvanized M.S. tube of
size 19mm x 19mm with a wall
thickness1mm±0.1mm. The lock rail made out of
‘H’ section, PVC hollow section of size 100mm x
24mm with a wall thickness 2mm±0.2mm, fixed
to shutter styles by means of plastic/galvanized
M.S. ’U’ cleats. The shutter frame filled with a PVC
multi-chambered panel of size 20 x 200mm with a
wall thickness 1mm±0.1mm. The panels filled
vertically and tie bar at two places by inserting
horizontally 0.6mm galvanized M.S. rod and
fastened with nuts and washers
Cement
Qty. (qtl.)
thick factory made PVC door shutters made of
styles and rails of a PVC hollow section of size
34mm x 24mm with a wall thickness
2mm±0.2mm. The styles and rails mitered cut
and joined at corners by means of M.S.
galvanized /plastic brackets of size 75mm x
220mm having wall thickness 1.0mm/solid and fix
with stainless steel screws. The styles of shutter
reinforced by inserting galvanized M.S. tube of
size 19 x 19mm with a wall
thickness1mm±0.1mm. The shutter frame filled
with a PVC multi-chambered single panel of size
20 x 762mm with a wall thickness 1mm±0.1mm.
The panels filled vertically and tie bar at two
places by inserting horizontally 0.6mm galvanized
M.S. rod and fastened with nuts and washers. All
complete as per manufacturer’s specification and
078200 direction
Providing of Engineer-In-Charge
and fixing at all heights wall paneling of Sqm 1552.93
12mm thick phenol bonded Bamboo Mat board
conforming to IS: 13958-1994 including providing
and fixing to frame work made of 50mm X 50mm
hardwood plugs including cutting brick work and
fixing in cement mortar and making good walls
etc. and also providing and fixing wooden
moulded corner beading of triangular shape to the
junction of paneling etc. with iron screws as a
complete job.
078210 Providing and fixing at all heights wall paneling of Sqm 1587.77
9mm thick phenol bonded Bamboo Mat board
conforming to IS : 13958-1994 including
providing and fixing to framework made of 50mm
X 50mm hardwood plugs including cutting brick
work and fixing in cement mortar and making
good the walls etc. and also providing and fixing
wooden moulded corner beading of triangular
shape to the junction of paneling etc. with iron
screws as a complete job
078220 Providing and fixing Veneered Bamboo Particle
Board both sides commercial Veneer SOGP Grade
II, conforming to IS 3097-1980 in wall paneling,
cupboard shutters etc. fixed to frames, backing or
studding with screws etc. complete (Frame,
backing, studding, hinges etc. to be paid
seperately)
078221 9 mm thick veneered bamboo particle board Sqm 640.15
Cement
Qty. (qtl.)
078230 Providing and fixing of wall panelling on grid Sqm 998.79
made of PVC profile section of size 21mm x
17mm x 1.5 mm filled with UPVC profile section of
size 150mm x 10mm x 1.0mm. The edge and
periphery covered by extruded PVC beeding of
section 28mm x 12mm x 1.0mm complete job
including fixing with screws, dash fasteners and
other accessories as required
thick factory made Poly Vinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow
section of size 60mmx30mm and wall thickness
2mm±0.2mm with inbuilt decorative mould-in
edging on one side. The styles and rails mitered
and joined at corners by means of MS
galvanized/plastic bracket of size 75mmx220mm,
having wall thickness 1.0mm and stainless steel
screws. Styles of shutter, reinforced by inserting
galvanized MS tube of size 20mmx20mm and
1mm ± 0.1 mm wall thickness. Lock rail made of
'H' section, a uPVC hollow section of size
100mmx30mm and 2mm ± 0.2m wall thickness
fixed to shutter styles by means of
plastic/galvanized MS 'U' cleats. Shutter frame
filled with a uPVC multi-chambered single panel of
size not less than 610mm, having overall
thickness of 20mm and 1mm ± 0.1 mm wall
thickness. Panels filled vertically with tie bar at
two places by inserting horizontally 6 mm
galvanised MS rod and fastened with nuts and
washers, complete as per direction of Engineer
incharge
2mm±0.2mm with inbuilt decorative moulding
edging on one side. Styles of shutter reinforced
by inserting PVC section of size 28mmx30mm of
1.5mmm ± 0.2mm wall thickness. Styles and rails
mitered and welded corners. Lock rail made of 'H'
section, a uPVC profile section of size
welded to shutter styles, shutter frame filled with
a uPVC multi-chambered single panel of size not
less than 610mm, having overall thickness of
20mm and 1mm ± 0.1mm wall thickness with
20mm moulding panel beading of size
8.5mmx15mm complete as per direction of
Engineer in charge
Cement
Qty. (qtl.)
2mm±0.2mm. Styles and rails mitered and joined
at the corners by means of MS galvanized/plastic
bracket of size 75mmx220mm having wall
thickness 1.0mm and stainless steel screws.
Styles of shutter reinforced by inserting
1mm ± 0.1 mm wall thickness. Lock rail made of
'H' section, a uPVC hollow section of size
fixed to the shutter styles by means of plastic
/galvanized MS 'U' cleats. Shutter frame filled
with a uPVC multi-chambered PVC panel of size
610mmx20mm with 1.2mm ± 0.1mm wall
thickness, complete as per direction of Engineer
incharge
078270 Providing and fixing factory made uPVC door R metre 248.67
frame made of uPVC extruded section profile size
50mmx60mm (±1mm) with wall thickness
2mm±0.2mm, corners of door frame to be
mitered and joined at corners by means of plastic,
galvanized brackets and stainless steel screws.
Hinge side vertical of frames reinforced by
1mm ± 0.1mm wall thickness and 3 nos. stainless
steel hinges fixed to frame complete as per
direction of Engineer incharge
078280 Providing and fixing factory made UPVC door
frame made of uPVC extruded section having an
overall dimension as below (tolerance ±1mm)
with wall thickness 2mm ± 0.2mm, corners of
door frame to be mitered and welded of plastic,
galvanized brackets and stainless steel screws.
Hinge side vertical of frames reinforced by
1mm ± 0.1mm wall thickness and 3 nos. stainless
steel hinges fixed to frame complete as per
direction of Engineer incharge.
078281 Extruded section profile size 48mm x40 mm R metre 238.99
078282 Extruded section profile size 42mm x50 mm R metre 213.49
Cement
Qty. (qtl.)
078290 Supplying, providing and fixing white colour RM 785.09
Double lipped solid PVC window frame of size 42
mm x 115 mm consisting of frame made of M.S.
Tube of 19 gauge of size 15 mm x 15 mm and
solid PVC section made from 4 mm thick (3.75
mm PVC foam sheet laminated with 0.25 mm
rigid PVC sheet) suitably joined using PVC solvent
cement so as to fix in walls using hold fasts. M.S.
Window grill should be fixed suitably with sold
PVC sections mitered cut on corners complete as
per directions of Engineer Incharge
078291 Supplying, providing and fixing white colour RM 388.57
Single lipped solid PVC window frame of size 50
mm x 35 mm consisting of frame made of M.S.
Tube of 19 gauge of size 15 mm x 15 mm and
solid PVC section made from 4 mm thick (3.75
rigid PVC sheet) suitably joined using PVC solvent
cement so as to fix in walls using hold fasts. M.S.
Window grill should be fixed suitably with sold
PVC sections mitered cut on corners complete as
per directions of Engineer Incharge
078300 Supplying, providing and fixing 25 mm thick sqm 2838.53
factory made white colour rigid glazed/wire
gauge/PVC sheet PVC window shutter consisting
of frame made of M.S. tube of 19 mm gauge of
size 15 mm x 15mm for style, top and bottom
rails. M.S. frame shall have a coat of steel primer -
M.S. frame shall be covered with 4 mm (3.75
rigid PVC sheet) thick white colour moulded PVC C
channel of size 50 mm x 25 x 50 mm of window
shutter forming style pand rails filled with 4 mm
thick glass panes/wire gauge/PVC sheet in clear
space available between style and rails using PVC
beeding of size 23 mm x 16 mm complete as per
direction of Engineer Incharge (glass pane/wire
gauge/PVC sheet to be paid extra)
078310 Providing and fixing of fibre glass reinforced RM 477.09
plastic (FRP) door frames of three legged of cross-
section 90 mm x 45 mm having single rebate of
32 mm x 15 mm to receive shutter of 30 mm
thickness. The laminate door frame moulded with
fire retardant grade unsaturated polyester resin
and chopped mat. Door frame laminate shall be 2
mm thick and shall be filled with suitable wooden
block in all the three legs. The frame shall be
covered with fibre glass from all sides. M.S. stay
shall be provided at the bottom to ready the
frame
Cement
Qty. (qtl.)
078320 Providing and fixing 30 mm thick glass fibre Sqm 2672.04
reinforced (FRP) panelled door shutter of required
colour and approved brand and manufacture,
made with fire retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP
laminate for farming hollow rails and styles, with
wooden frame and suitable blocks of seasoned
wood inside at required places for fixing of
fittings, cast monolithically with 5 mm thick FRP
laminate for panels and conforming to (IS:14856-
2000) complete work
078330 Providing and fixing 30 mm thick fibre glass Sqm 2972.10
reinforced (FRP) flush door shutter in different
plain and wood finish made with fire retardant
grade unsaturated polyester resin moulded to 3
mm thick FRP laminate all around, with suitable
wooden blocks inside at required places for fixing
of fittings and ployurethane foam
(PUF)/Polystryrene foam to be used as filler
material throughout the hollow panel, casted
monolithically with test parameters of F.R.P.
laminate conforming to Table 3 of IS 14856:2000,
complete as per directions of Engineer Incharge
078340 Providing & fixing in position concealed GI section
for wall panelling using Board of required
thickness, fixed on the 'W' profile (0.55mm thick)
having a knurled web of 51.55mm and two
flanges of 26mm each with lips of 10.55mm
placed at 610mm c/c in perimeter channel,
having one flange of 20mm and another flange of
30mm with thickness of 0.55mm and web of
length 27mm. Perimeter channel is fixed on the
floor and the ceiling with nylon sleeves at 610mm
c/c with fully threaded self-tapping dry wall
screws. Board is fixed to 'W' profile with 25mm
countersunk ribbed head-screws at 200mm c/c,
all complete as per drawing & directions of
engineer-in-charge. Joints of boards are finished
with specially formulated jointing compound and
48mm wide jointing tape to provide seamless
078341 finish
8mm thick non-asbestos multipurpose cement Sqm 646.87
board, reinforced with cellulose fibre
manufactured through auto-claving process (high
pressure steam-cured) as per IS:14862 with
suitable fibre cement screw
079010
079020
079030
079040
079050
IR's Unified Standard Schedule Of Rates 2010 Chapter-8 : Steel and Aluminium Work
CHAPTER - 8 : STEEL AND ALUMINIUM WORK
Cement
Qty.(qtl.)
STEEL WORK
081010 Structural steel work in single section including
cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position, including applying
a priming coat of approved steel primer, complete -
upto 6m height above GL
081011 In RSJ, tees, angles and channels Kg 52.19
081012 In flats, plates, round or square bars Kg 52.01
081020 Structural steel work riveted or bolted in built up
sections, trusses and framed work, girders, staging,
racks etc including cutting, bending, straightening,
drilling, rivetting, bolting, hoisting, fixing in position
including applying a priming coat of a approved steel
primer complete - upto 6m height above GL
081022 In flats, plates, round or square bars Kg 54.10
081030 Structural steel work welded in built up sections,
trusses and framed work, girders, stagings, racks, etc
including cutting, bending, straightening, hoisting,
fixing in position, including applying a priming coat of
approved steel primer, complete - upto 6m height
above GL
081032 In flats, plates , round or square bars Kg 70.86
Note for Item 081030 : Purlins and wind bracings shall
be paid separately under item 81010.
Note for Items 081011, 081021 & 081022 : These
rates are not to be paid for ironwork with rails, which
should be paid under each item separately.
081040 Extra for every subsequent 3m height or part thereof
over 6m height above GL for erection and fixing of
steel work :
081041 Over item no 081012 Kg 2.68
081042 Over item no 081022 Kg 2.76
081043 Over item no 081032 Kg 7.42
081050 Erecting roof trusses, tank stagings, steel tanks etc. quintal 223.72
including rivetting for work upto 10 m height above G
081060 L
Extra to item no 081050 for every subsequent 5m quintal 55.93
height, or part thereof, over 10m height above GL
081070 Erecting rails in posts, platform wall copings etc. quintal 70.91
including necessary cutting and drilling
081080 Riveting including reaming holes where necessary for 100 112.57
every 5mm dia or part thereof rivets
081090 Cutting out rivets for every 5mm or part thereof 100 56.91
rivets
Cement
Qty.(qtl.)
081100 Providing and fixing MS round or square bars/ flats or Sqm 48.35
grills in frames in window and clerestory windows
081110 Providing and fixing expanded metal 20X60mm Sqm 345.24
strands 3.25mm wide and 1.6mm thick on angle iron
flat iron frames including all incidental work complete.
Cost of frames to be paid separately under relevant
item
081120 Providing and fixing hard drawn steel wire fabric Sqm 491.35
75X25 mm mesh of weight not less than 7.75 Kg per
sqm on angle iron or flat iron frame including all
incidental work complete. Cost of frames to be paid
separately under relevant item
081130 Providing and fixing MS flat 25mm x 6mm covering metre 162.74
over expanded metal/ hard drawn wire fabric edges
(executed as per Item 081110 and 081120) along the
perimeter of the angle iron or flat iron framework
including all incidental work, complete
081140 Supplying and fixing lewis/ holding down bolts of Kg 53.11 0.020
approved design with nuts and washers complete
081150 Rethreading bolts per 5mm dia, or part thereof per, cm 3.28
cm length, or part thereof, of threading
081160 Cutting standard screw thread per 5mm dia. or part cm 7.14
thereof per cm length, or part thereof, of threading
when separately ordered
081170 Cutting round/ square bars per 10 mm dia/width or Each 4.69
part thereof when seperately ordered
081180 Providing and fixing in position collapsible steel Sqm 2652.82 0.004
shutters with vertical channels 20x10x2mm and
braced with flat iron diagonals 20x5mm size with top
and bottom rail of T-iron 40x40x6mm with 40mm dia,
steel pulleys complete with bolts, nuts, locking
arrangement, stoppers, handles and hold fasts
including applying a priming coat of approved steel
primer
081190 Providing and fixing 1mm thick M.S. sheet sliding- Sqm 2326.73 0.004
shutters with frame and diagonal braces of
40x40x6mm angle iron, 3mm M.S. gusset plate at the
junction and corners 25mm dia pulley 40x40x6mm
angle and T-iron guide at the top and bottom
respectively with bolts, nuts, locking arrangement,
clamping arrangement, stoppers, handles and hold
fasts including applying a priming coat of approved
steel primer
081200 Providing and fixing 1mm thick M.S. sheet door
shutter with frame of 40x40x6mm angle iron and
3mm M.S. gusset plates at the junctions and corners,
all necessary fittings complete, including applying a
priming coat of approved steel primer
081201 Using M.S. angles 40x40x6mm for diagonal braces Sqm 1900.37 0.004
081202 Using flats 30x6mm for diagonal braces and central Sqm 1749.92 0.004
cross piece
Cement
Qty.(qtl.)
081210 Supplying and fixing rolling shutters of approved make
as per IS 6248, made of required size M.S. laths
interlocked together through their entire length and
jointed together at the end by end locks mounted on
specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside
locking with push and pull operation complete
including the cost of providing and fixing necessary
27.5cm long wire spring grade No.2 and M.S. top
cover of required thickness for rolling shutters
081211 80x1.25mm M.S. laths with 1.25mm thick top cover Sqm 2136.73 0.004
081220 Providing and fixing ball bearing for rolling shutters Each 393.19
081230 Extra for providing mechanical device chain and crank
operation for operating rolling shutters
081231 Exceeding 10.00Sqm and upto 16.80 Sqm. in the area Sqm 770.68
081232 Exceeding 16.80 Sqm in area Sqm 851.03
081240 Extra for providing grilled rolling shutters Sqm 505.25
manufactured out of 8mm dia. M.S. bar instead of
laths as per design approved by the Engineer-in-
Charge (area of grill to be measured)
081250 Providing and fixing ISI standard steel glazed doors,
windows and ventilators of standard rolled steel
sections (shutters & frame), joints mitered and welded
with 15x3mm lugs, 10cm long, embedded in cement
concrete blocks 15x10x10cm of 1:3:6 (1cement:
3coarse sand: 6graded stone aggregate 20mm
nominal size) or with wooden plugs and screws or rawl
plugs and screws or with fixing clips or with bolts and
nuts as required, including providing and fixing glass
panes with glazing clips and special metal sash putty
of approved make, necessary fittings such as brass
handles, brass peg stays, brass spring catch, bolts,
hinges, locks etc as required, applying a priming coat
of approved steel primer but excluding the cost of
081251 metal
Doors beading Sqm 2692.11 0.010
081252 Windows fixed Sqm 2570.88 0.010
081253 Windows-side hung Sqm 2775.93 0.010
081254 Ventilators-top hung Sqm 2806.13 0.010
081255 Ventilators-centre hung Sqm 2806.13 0.010
081260 Extra for providing and fixing steel beading of metre 22.09
approved shape and section with screws instead of
glazing clips and metal sash putty in steel doors,
windows, ventilators and composite units
Cement
Qty.(qtl.)
081270 Providing and fixing T-iron frames for doors, windows Kg 99.06 0.001
and ventilators of mild steel Tee-sections, joints
mitered and welded with 15x3mm lugs 10cm long
embedded in cement concrete blocks 15x10x10cm of
1:3:6 (1cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) or with wooden plugs
and screws or rawl plugs and screws or with fixing
clips or with bolts and nuts as require including fixing
of necessary butt hinges and screws and applying a
priming coat of approved steel primer
081280 Providing and fixing pressed steel door frames
manufactured from commercial mild steel sheet of
1.25mm thickness including hinges jamb, lock jamb,
bead and if required angle threshold of mild steel
angle of section 50x25mm, or base ties of 1.25mm
pressed mild steel welded or rigidly fixed together by
mechanical means, adjustable lugs with split end tail
to each jamb including steel butt hinges 25mm thick
with mortar guard, lock strike-plate and shock
absorbers as specified and applying a coat of approved
steel primer after pretreatment of the surface as
directed by the Engineer-in-Charge
081281 Profile-A (105x60mm) Single rebate metre 425.00
081282 Profile-B (125x60mm) Single rebate metre 456.94
081283 Profile-C (160x60mm) Double rebate metre 464.25
081290 Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat
of approved steel primer, welded and bolted including
special shaped washers etc. complete
081291 Hot finished welded type tubes Kg 86.05
081292 Hot finished seamless type tubes Kg 93.37
081293 Electric resistance or induction butt welded tubes Kg 106.18
081300 Providing and fixing 20x6mm mild steel 15cm long Each 23.06
clamps for securing chick tops
081310 Providing and fixing mild-steel rings of 6mm round Each 16.67
bars and 40mm internal dia for fastening ropes of
chicks
081320 Providing and fixing M.S. fan clamp of 16mm dia M.S. Each 83.99
bar bent to shape with hooked ends in R.C.C. slabs
during laying including painting the exposed portion of
loop, all as per standard design complete
081330 Extra over rate of Item No. 081320 for providing and cm 1.30
fixing M.S. fan clamp as per design in R.C.C. beams height
during laying towards the additional height of the
clamps due to beam rib
081340 Providing and fixing circular cast iron box for ceiling Each 91.26
fan clamps 140mm internal dia. 73mm height, 5mm
thick rim, bottom and top lid of 1.5mm thick M.S.
sheet with its top surface hacked .. Contd. -
Cement
Qty.(qtl.)
.. Contd. - for proper bonding top lid shall be screwed
into the cast iron box by means of 3.3mm dia. Round
headed screws, one lock at the corners, clamps shall
be made of 12mm dia. M.S. bar bent to shape as per
standard drawing
081350 Providing and fixing circular/ hexagonal M.S. sheet Each 107.52
ceiling fan box with clamps of internal dia 140mm,
73mm height, 3mm thick rim, top and bottom lid of
1.5mm M.S. sheet. Lids shall be screws into M.S. box
by means of 3mm round beaded screws, clamps shall
be made of 12mm dia M.S. bar bent to shape as per
standard drawing with over all length as 80cm. (it
includes cost of clamps also)
081360 Providing and fixing M.S. round holding down bolts Kg 68.17
with nuts and washer plates complete
081370 Providing and fixing bolts including nuts and washers Kg 88.20
complete
081380 Providing and fixing M.S. rivets of sizes in position Kg 86.02
081390 6mm welding by gas plant including transportation of cm 7.96
gas welding plant at site etc. complete
081400 6mm welding by electric plant including transportation cm 6.79
of electric welding plant at site etc. complete
081410 Steel work welded in built up sections/ framed work
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer using
structural steel etc. as required
081411 In stringers, treads, landings etc. of stair cases Kg 77.82
including use of chequered plate wherever required all
complete
081412 In gratings, frames, guard bar, ladders, railings, Kg 73.68
brackets, gates and similar works
081420 Providing and fixing hand rail by welding etc. to steel
ladders railing, balcony railing and staircase railing
including applying a priming coat of approved steel
primer
081421 M.S. tube (medium) 40mm nominal bore Kg 89.30
081422 E.R.W. tubes 40mm nominal dia. Kg 115.89
081423 G.I. pipes 40mm nominal bore (class B) Kg 99.39
081430 Supplying and fixing to pan type latrines 0.91 mm Sqm 435.38
thick M.S. Steel Flat Cover (hinged on 12 mm dia M.S.
bar on top) with 6.0mm dia bar handle welded or
riveted on the flap. (including all labour and material)
ALUMINIUM WORK
082010 Providing and fixing anodised aluminium work for
doors, windows, ventilators and partitions with
extruded built up standard tubular and other sections
of approved make conforming to IS:733 and IS:1285,
anodised transparent or dyed to required shade
according to IS:1868 (Minimum anodic coating of
grade AC 15), ... Contd. -
Cement
Qty.(qtl.)
... Contd. -- fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fasteners including
necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC/neoprene felt etc.
Aluminium sections shall be smooth, rust free,
straight, mitered and jointed mechanically wherever
required including cleat angle. Aluminium snap
beading for glazing/ panelling, C.P. brass/stainless
steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.
(Glazing and panelling to be paid for separately)
082011 For fixed portion Kg 420.48 0.001
082012 For openable/sliding portions and fixing hinges / Kg 436.46
pivots, PVC/ neoprene gasket required and making
provision for fixing of fittings. (Fittings shall be paid
for separately)
082020 Providing and fixing 12mm thick prelaminated three
layer medium density (exterior grade) particle board
Grade I, Type II conforming to IS: 12823 bonded with
phenol formaldehyde synthetic resin, of approved
brand and manufacture in panelling fixed in aluminium
doors, windows shutters and partition frames with C.P.
brass/ stainless steel screws etc. complete as per
architectural drawings and directions of engineer-in-
charge
082021 Pre-laminated particle board with decorative Sqm 849.42
lamination on one side and balancing lamination on
other side
082022 Prelaminated particle board with decorative lamination Sqm 849.42
on both sides
082030 Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with
PVC/ neoprene gasket etc. complete as per the
architectural drawings and the directions of engineer-
in-charge. (Cost of aluminium snap beading shall be
paid in basic item)
082031 With float/frosted glass panes of 4mm thickness Sqm 841.80
(weight not less than 10.0 kg/sqm)
082032 With float/frosted glass panes of 5.5mm thickness Sqm 914.76
(weight not less than 13.75 kg/sqm)
082040 Providing and fixing double action hydraulic floor
spring of approved brand and manufacture IS:6315
including cost of cutting floors as required, embedding
in floors and cover plates with brass pivot and single
piece M.S. Sheet outer box with slide plate etc.
complete as per the direction of Engineer-incharge
082041 With Stainless Steel cover plate Each 2116.07
082042 With Brass cover plate Each 2380.22
Cement
Qty.(qtl.)
082050 Providing and fixing anodised aluminium work (with Kg 572.86
minimum 15 micron uniform anodic coating)
consisting of tee/angle sections, of approved make
conforming to IS:733 in frames of false ceiling
including aluminium angle cleats with necessary C.P.
brass/stainless steel sunk screws, aluminium
perimeter angles fixed to wall with rawl plugs @ 450
mm centre to centre and fixing the frame work to level
adjusting hangers (6mm dia. M.S. rods) with
necessary cadmium plated machine screws all
complete as per approved architectural drawings and
direction of the Engineer-in-charge (level adjusting
hangers, ceiling cleats and expansion hold fasteners to
082060 be paid forand
Providing separately)
fixing level adjusting hangers of 6mm Each 130.11
dia. M.S. rods (upto 1200mm length) fixed to roof
slabs by means of M.S. angle ceiling cleats
40x40x5mm size, 40mm long and expansion hold
fasteners 12.5 mm dia. 40mm long including applying
priming coat of zinc chromate yellow primer for steel
members complete
082070 Providing and fixing machine moulded anodised
aluminium covering of approved pattern & design,
made out of machine cut aluminium sheet and
machine holed for receiving screws, over expansion
joints on vertical surfaces / ceilings with full threaded,
cadmium plated steel screws 4 mm dia. stem, 30mm
long and aluminium washers 2mm thick, 15mm dia, at
a staggered pitch of 200mm centre to centre including
drilling holes in the receiving surface and providing
expandable plastic sleeves in holes etc. complete.
(Anodising on the aluminium sheet and washers to be
15 micron thick)
082071 Made out of 170mm wide anodised aluminium sheet Kg 334.46
2.5 mm thick
082072 Made out of 210mm wide anodised aluminium sheet Kg 333.72
2.5 mm thick
082080 Aluminium Composite Cladding - Providing and fixing Sqm 2171.45 0.020
Aluminium Composite Panels having total thickness of
4mm (with 0.5mm thick aluminium foil skin on both
sides) alongwith minimum 25 micron PVdF Coating on
top coil and Polymer/epoxy coating on Back coil (4-7
microns) fixed on aluminium substructure of 50mm x
25mm x 3mm or 38mm x 38mm x 4mm (IS Grade
Aluminium Extrusion) with stainless steel fastening
system of Hilti/Fischer Dash Fasteners on facade,
horizontal / vertical surfaces of columns, suspended
ceiling, sills, jambs, canopies etc. and making 25mm
grooves and applying non staining and non streaking
sealant 789 or 991 HP with Baker Rod complete as per
approved shop drawings and as per specifications
(straight and curved). Only exposed surfaces to be
measured and paid.
Cement
Qty.(qtl.)
082081 Extra for using 5mm thick aluminium composite panel Sqm 2.90
(with 0.5mm thick aluminium foil skin on both sides)
in lieu of 4mm Aluminium composite panel (only
thickness of core to be 4mm in lieu of 3mm in item
082080 above)
082082 Deduct if 3mm thick aluminium composite panel (with Sqm 635.92
0.25mm thick aluminium foil skin on both sides) is
used in lieu of 4mm Aluminium composite panel
(thickness of core to be 2.5mm in lieu of 3mm in item
082080 above)
083010 Repairing aluminium glazed door/ window/partition Kg 444.82
leaf & frame by replacing damaged portion i.e style,
rails, horizontal and vertical members with necessary
anodized aluminium hollow tubes, angles, taper cleats,
screws etc. of any section to match with existing one
including taking out the door leaf/ frame, if required
with due care to prevent further damage and refixing
the same in original position after repairing complete
in all respect. Extra fittings if required to be paid
separately
083020 Providing and fixing Aluminium round/ square bars / Sqm 682.87
flats or grill in frame of windows and cleastory
windows
083030 Providing and fixing acrylic sheet for glazing in
aluminium door, window, ventilator shutter, partition,
reservation counter etc. with Aluminium round /
square bars / flats or grill in frame of windows and
cleastory windows etc. with PVC/neoprene gasket etc.
complete (cost of aluminium frame/grill shall be paid
separetly in relevant item)
083031 3 mm thick Sqm 797.52
083032 5 mm thick Sqm 1048.80
083040 Extra for using coloured acrylic sheet instead of Sqm 79.75
transparent / transculant sheet
083050 Fabricating, supplying & installing stainless steel Kg 590.96
railings for staircases, balconies, FOBs,
Enquiry/Reservation complex etc., made of SS 304
grade stainless steel, laser cut / water jet cut (no
shearing), polished with Automatic round/flat
polishing machine to get a uniform hairline finish. All
parts shall be connected to each other with the help of
prescribed size CNC made solid connectors,
countersunk screws. Welding should be finished
ensuring that no welding marks are visible and
assembly is mounted on floor with the help of dash
fasteners. Railings shall be fabricated as per approved
drawings by engineer-in-charge. Manufacturer shall
submit maintenance manual and basic material test
report for grade certification.
083060 Extra over item 083050 for using SS 316 Grade Kg 98.73
stainless steel (to be used in corrosive coastal areas)
instead of SS 304 Grade
Cement
Qty.(qtl.)
084010
084020
084030
084040
084050
084060
084070
084080
084090
084100
IR's Unified Standard Schedule Of Rates 2010 Chapter-9 : Flooring, Paving And Dado
CHAPTER - 9 : FLOORING, PAVING AND DADO
Cement
Item No. Description Unit Rate (Rs.)
Qty.(qtl.)
BRICK FLOORING
091010 Brick on edge flooring with bricks of class
designation 7.5 including cement slurry etc.
complete in cement mortar
091011 1:4 (1cement: 4coarse sand).(With FPS Bricks) Sqm 240.66 0.185
091020 Flat Brick flooring with bricks of class designation
7.5 including cement slurry etc. complete in
cement mortar
091030 Providing hand packed dry flat brick flooring, class
designation 7.5 (FPS Bricks), excluding pointing with
joints filled with sand over a bed of dry sand
(ordinary)of average thickness 25 mm including
ramming sub grade :
091031 Brick on edge Sqm 221.76
091032 Flat brick Sqm 152.35
091040 Deduct where railway bricks old / new are supplied
091041 From flat brick flooring Sqm 102.85
091042 From brick on edge flooring Sqm 153.61
091050 Extra for brick flooring (with F.P.S bricks) laid in Sqm 11.01
diagonal / herring bone bond or other pattern as
specified
091060 Dry stone ballast 50 mm nominal size, rammed in Sqm 103.87
floors 75 mm thick layer
091070 Moorum flooring 10 cm thick (consolidated depth) Sqm 98.81
including watering and ramming. With Contractor's
Moorum
091080 Laying cement concrete 1:2:4 (1cement: 2coarse cum 1990.67 3.200
sand: 4graded stone aggregate 12.5mm nominal
size) of thickness 25 to 40 mm as under layer of
flooring
091090 Laying cement concrete 1:2:4 (1cement: 2coarse cum 2044.15 3.200
sand: 4graded stone aggregate 20mm nominal size)
of thickness 40 to 100mm as under layer of flooring
CEMENT CONCRETE FLOORING

092010 Cement concrete flooring 1:2:4 (1cement: 2coarse
sand: 4graded stone aggregate) finished with a
floating coat of neat cement including cement slurry,
but excluding the cost of nosing of steps etc.
092011 complete
25mm thick with 12.5mm nominal size stone Sqm 86.95 0.123
aggregate
092012 40mm thick with 20mm nominal size stone Sqm 110.34 0.170
aggregate
Cement
Qty.(qtl.)
aggregate
aggregate
092015 Extra for nosing of steps Sqm 23.53
092020 Cement plaster skirting (upto 30cm height) with
cement mortar 1:3 (1cement: 3coarse sand) finished
with a floating coat of neat cement
092021 15mm thick Sqm 98.09 0.110
092022 18mm thick Sqm 100.06 0.140
092030 Cement concrete pavement with 1:2:4 (1cement: cum 2022.84 3.200
nominal size) complete
092040 Extra over for making chequers of approved pattern Sqm 16.02
on cement concrete floors, steps, landing,
pavements etc.
092050 Laying 15 mm thick hardened topping on concrete Sqm 215.94
surface with 1 part metallic floor hardener, 4 parts
cement and 9 parts by weight hard stone chips of
size 6 mm mixed and laid as per specifications
092060 Providing and laying plain cement concrete flooring
of specified thickness with mix design concrete over
firm, well prepared and well compacted bed
including provision of designed expansion joint &
finishing manually or mechanical trowel ling &
vacuum dewatering complete. Expansion joint to be
paid for separately.
092061 M-20 cum 2394.37 3.440
092062 M-25 cum 2394.37 3.990
092063 M-30 cum 2394.37 4.070
TERRAZO FLOORING :
093010 Providing top layer of floor, 6mm thick with white,
black, chocolate, grey, yellow or green marble chips
of sizes from 1mm to 4mm nominal size laid in
cement marble powder mix 3:1 (3cement: 1marble
powder) by weight in proportion of 4:7 (4cement
marble powder mix: 7marble chips) by volume
including cement slurry etc. complete
093011 With ordinary cement without any pigment Sqm 198.07 0.041
093012 With ordinary cement with pigment Sqm 214.56 0.041
093013 With white cement with pigment Sqm 278.85
093020 Providing top layer of floor, 9mm thick with white,
black, chocolate, grey, yellow or green marble chips
of sizes - 4mm to 7mm nominal size laid in cement
marble powder mix 3:1 (3 cement : 1marble
powder) by weight in proportion of 4:7 (4 cement
marble powder: 7marble chips) by volume including
cement slurry etc. complete
Cement
Qty.(qtl.)
093030 Marble chips skirting (upto 30cm height) rubbed &
polished to granolithic finish, top layer 6mm thick of
marble chips - white / black / chocolate / grey /
yellow / green of sizes - smallest to 4mm laid in
cement marble powder mix 3:1 (3 cement:1marble
powder) by weight in ratio of 4:7 (4 cement marble
powder mix : 7 marble chips) by volume :
093031 18mm thick with under layer 12mm thick cement Sqm 355.67 0.129
plaster 1:3 (1cement: 3coarse sand). with ordinary
cement
cement and pigment
plaster 1:3 (1cement: 3coarse sand). with white
cement and pigment
cement
cement and pigment
plaster 1:3 (1cement: 3coarse sand). with white
cement and pigment
093040 Extra for laying terrazzo in narrow bands not metre 1.23
exceeding 7.5cm in width
093050 Extra for terrazzo flooring laid as floor borders, Sqm 11.65
margins and similar bands exceeding 7.5cm but not
exceeding 30cm in width
093060 Extra for laying terrazzo flooring on staircases treads Sqm 17.48
not exceeding 30cm in width including cost of
forming, nosing etc.
093070 Extra for making moulded nosing in terrazzo metre 54.88
including returned moulded ends and angles to
093080 mouldings
Crazy marble stone flooring including filling the gaps Sqm 629.32
with light shade pigment with white cement marble
powder mixture (3parts of white cement: 1 part of
marble powder) by weight in proportion of 4:7
(4cement marble powder mix: 7white, black or white
and black marble chips of sizes from 1mm to 4mm
nominal size by volume) including rubbing, polishing
and cement slurry etc. complete - 18mm thick crazy
marble stone white, black or as specified
TERRAZO TILES
Cement
Qty.(qtl.)
094010 Providing and laying precast factory made terrazzo
tiles 22mm thick with graded marble chips of size
upto 12mm laid in floors and landings, jointed with
neat cement slurry mixed with pigment to match the
shade of the tiles including rubbing and polishing
complete with precast tiles on 20mm thick bed of
cement mortar 1:4 (1cement: 4coarse sand)
094020 Extra if terrazzo tiles are laid in treads of steps not Sqm 22.39
094030 Precast factory made terrazzo tiles 22mm thick with
graded marble chips of size upto 12mm in walls,
skirting and risers of steps on 12mm thick cement
plaster 1:3 (1cement: 3coarse sand) jointed with
neat cement slurry mixed with pigment to match the
shade of the tiles including cutting/wastage of tiles,
rubbing and polishing complete with tiles made :
094040 Precast Chequered factory made terrazzo tiles 22mm
thick/ with graded marble chips size upto 6mm in
floors jointed with neat cement slurry mixed with
pigment to match the shade of the tiles including
rubbing of cement slurry complete on 20mm thick
bed of cement mortar 1:4 (1cement : 4Coarse sand)
094050 Precast Chequered factory made terrazzo tiles 30mm
thick with graded marble chips of sizes upto 12mm
in stairs treads jointed with neat cement slurry
mixed with pigment to match the shade of the tiles
including rubbing and polishing, rounding of nosing
etc. complete on 20mm thick bed of cement mortar
1:4 (1cement:Coarse sand)-
Cement
Qty.(qtl.)
094060 Providing & fixing Precast Chequered tiles
conforming to IS:13801:1993, manufactured under
mechanical vibration & hydraulic pressing machine in
double layer; top layer of 10 to 12 mm thickness of
Dolomite Powder, graded chips, fibre and UV
stabilised iron oxide Lanexess colour and bottom
layer of 1:3 CC mixed with galvanised steel fibre of
approved quality, jointed with neat cement slurry
mixed with pigment to match shade of tiles including
rubbing and cleaning etc. complete on 20mm thick
bed of cement mortar 1:4 of sizes :
094061 250mm x 250mm x 25mm thick Sqm 440.52 0.094
094070 Providing and fixing 10mm thick heavy duty acid
and/or alkali resistant factory made tiles conforming
to Group V-RD series of approved make and colour
using acid and/or alkali resisting mortar bedding and
joints filled with acid and/or alkali resisting cement
as per IS: 4457 complete including cost of acid/alkali
resistant cement
094071 In flooring on a bed of 10mm thick mortar 1:4 (1 Sqm 931.26 0.047
Appropriate cement : 4 coarse sand)
094072 In dado/skirting on 12mm thick mortar 1:4 (1 Sqm 1000.05 0.050
Appropriate cement : 4 coarse sand)
094080 Tile work in skirting, risers of steps and dado (upto Sqm 734.87 0.104
2m height) over 12mm thick bed of cement mortar
1:3 (1cement: 3coarse sand) and jointed with grey
cement slurry @ 3.3kg/ Sqm including pointing in
white cement mixed with pigment of matching shade
complete with - Marble tiles (polished) Raj Nagar
8mm thick
CERAMIC TILES :
095010 Providing and fixing Ist quality ceramic tiles
conforming to Group B-III (Ceramic Wall Tiles) of
IS:15622 of manufacturers approved by railway in
all colours, shades, and design as approved by the
Engineer-in-Charge in skirting, risers of steps and
dado over 12mm thick bed of cement mortar 1:3
(1cement: 3coarse sand) including pointing in white
cement mixed with pigment of matching shade
complete
095011 200x200 mm Sqm 580.19 0.124
095012 200x300 mm Sqm 580.16 0.124
095013 300x450 mm and above Sqm 645.67 0.124
Cement
Qty.(qtl.)
095020 Providing and fixing ceramic tiles conforming to
IS:15622 of manufacturers approved by railway in
all colours, shades, design and abrasion resistance
class as approved by the Engineer-in-Charge in
floors and landings over 20mm thick bed of cement
pointing in white cement mixed with pigment of
matching shade complete
095021 Of Group B-II Clause 5.1 (for abrasion resistance) of Sqm 512.30 0.124
IS:15622 (Ceramic Floor Tiles) of size 300x300mm
095022 Of Group B-II Clause 5.1 (for abrasion resistance) of Sqm 518.25 0.124
IS:15622 (Ceramic Floor Tiles) of size 400x400mm
and above
095023 Of Group B-I-b of IS : 15622 (Ceramic Tiles) of size Sqm 645.64 0.124
200x200mm to 400x400mm
095024 Of Group B-I-b of IS : 15622 (Ceramic Tiles) of size Sqm 829.78 0.124
above 400x400mm
095025 Of Group B-I-a of IS : 15622 (Vitrified tiles) of size Sqm 839.70 0.124
upto 400x400 mm
above 400x400mm upto 600x600 mm
800x800mm and above
095030 Extra over items 095025 and 095026, if adhesive Sqm 40.15
(recommended by manufacturer of tiles) of specified
thickness is used instead of cement mortar
095040 Extra over basic items for using rectified tiles when Sqm 73.81
specifically ordered
095050 Providing and fixing in floors 'rounded cove nosing' Each 220.13
External & Interior Media ceramic tile of size 10cm x
30cm having thickness not less than 8mm of colour
and shade, as approved by Engineer-in-charge over
12mm thick cement mortar 1:3; complete work
including filling of joints with white or pigmented
cement
MARBLE & KOTA STONE FLOORING

096010 Marble stone flooring with 18mm thick marble stone
(sample of marble shall be approved by the Engineer-
in-Charge) over 20mm (average) thick base of
cement mortar 1:4 (1cement: 4coarse sand) laid and
jointed with grey/white cement slurry, including
pigment if required, including rubbing and polishing
complete with :
096011 Makrana White quality marble Sqm 1130.55 0.087
096012 Rajnagar plain/Black Zebra/Udaipur green marble / Sqm 1133.22 0.087
Pink plain marble
096013 Agaria White Sqm 1894.58 0.087
096020 Extra for nosing in marble stone for treads, sills etc. Sqm 138.14
096030 Extra for making grooves up to 5 mm deep in marble
stone for tread, sills etc. of width
096031 3mm to below 6 mm Sqm 78.37
Cement
Qty.(qtl.)
096032 6 mm & above Sqm 93.55
096040 Extra for marble stone flooring in treads of steps, not Sqm 159.99
096050 Rubbing/polishing of old floors,Terrazzo or Sqm 39.14
mosaic/Marble/ skirting and dado including treads
and risers of steps of terrazzo/terrazzo tiles plain or
chequered, kota stone, marble tiles etc. with fine
grade carborandum stone with machine or manually
complete
096060 Kota stone slab flooring of size up to 30x30cm over
20mm (average) thick base of 1:4 cement mortar
(1cement: 4coarse sand) and jointed with grey
cement slurry mixed with pigment to match the
shade of the slab including rubbing and polishing
complete
096061 20 mm thick Sqm 881.99 0.149
096062 25mm thick Sqm 1008.55 0.149
096063 30mm thick Sqm 975.94 0.150
096064 40mm thick Sqm 1198.31 0.150
096070 Kota stone slab flooring of size up to 60x60cm over
20mm (average) thick base of 1:4 cement mortar
(1cement: 4coarse sand) and jointed with grey
cement slurry mixed with pigment to match the
shade of the slab including rubbing and polishing
complete
096071 20mm thick Sqm 917.05 0.149
096072 25mm thick Sqm 962.13 0.149
096073 30mm thick Sqm 1031.71 0.150
096074 40mm thick Sqm 1263.43 0.150
096080 Kota stone slabs 25mm thick in risers of steps, Sqm 897.92 0.137
skirting, dado and pillars laid on 12mm (average)
thick cement mortar 1:3 (1cement: 3coarse sand)
and jointed with grey cement slurry mixed with
pigment to match the shade of the slab, including
rubbing and polishing complete :
096090 Extra for nosing in steps and treads of kota stone Sqm 131.02
slab.
096100 Extra for making grooves up to 5 mm deep in Kota
stone for tread, sills etc. of width
096101 3mm to below 6 mm Sqm 75.43
096102 6 mm & above Sqm 90.61
096110 Extra for kota stone flooring in steps and treads not Sqm 153.05
096120 Providing flag stone (Neemuch, Shahabad, Kota,
etc) flooring unpolished over 20mm (average) thick
1:4 cement mortar (1cement:4coarse sand) base
laid over and jointed with grey cement slurry mixed
with pigment to match the shade of the slab
complete including cement sand pointing 1:2 with
pigment and cleaning etc complete
Cement
Qty.(qtl.)
096121 25mm thick stones Sqm 781.27 0.149
096122 40mm thick stones Sqm 889.16 0.152
SAND STONE FLOORING :
097010 40mm thick rough chisel dressed stone flooring over
20mm (average) thick base of cement mortar 1:4
(1cement: 4coarse sand) with joints finished flush
with 1:2 cement sand mortar
097020 40mm thick fine dressed stone flooring over 20mm
(average) thick base of cement mortar 1:4
(1cement: 4coarse sand)including pointing with
cement mortar 1:2 (1cement: 2stone dust) with an
admixture of pigment to match the shade of stone
097030 40mm thick fine dressed and rubbed stone flooring
over 20mm (average) thick base of cement mortar
1:4 (1cement: 4coarse sand) with joints 5mm thick,
including pointing with cement mortar 1:2 (1cement:
2stone dust) with an admixture of pigment to match
the shade of stone
097040 Extra over Items for nosing in steps and treads of metre 36.35
sand stone
097050 Extra over sandstone flooring in steps and treads Sqm 6.02
not exceeding 30cm in width
MISCELLANEOUS FLOORING
098010 Providing and laying stone setts flooring with
stone(Of igneous Origin) setts 15 cm thick laid flat
over 15 cm thick bed of sand (Ordinary)
098011 With joints thoroughly filled with ordinary sand Sqm 327.66
098012 With joints filled thoroughly with 1:6 mix (by weight) Sqm 669.14
of bitumen and ordinary sand
098020 Supplying and laying interlocking pre-cast CC block
pavers of approved design factory manufactured of
specified grade cement concrete on passenger
platform, foot paths, circulating area, etc, including
setting in position over 25mm thick bedding layer of
fine sand, filling the joints with fine sand, leveling
including compaction as per IS 15658
098021 60 mm thick blocks of M30 grade for light traffic Sqm 478.28
098022 80mm thick blocks of M35 grade for medium traffic Sqm 702.23
098023 120mm thick blocks of M40 grade for heavy traffic Sqm 967.31
098024 High quality blocks for pedestrian pathways 35mm Sqm 546.84
thick of M40 grade
098030 Extra over items for using plastic moulds if Sqm 59.57
specifically ordered
Cement
Qty.(qtl.)
098040 Extra over items for lacquer finish Sqm 73.79
098050 Extra over Item 098010 for addition of pigment in Sqm 25.14
concrete of paver blocks
098060 Providing and fixing homogeneous polyvinyl chloride
sheet/ tile in flooring and skirting in approved
pattern on a smooth and damp proof base using
rubber based adhesives of approved quality and
manufacturer like Dunlop S- 758, Fevicol SR 998 or
equivalent including rolling with light wooden roller
weighing about 5kg. all complete as directed by the
Engineer-in-Charge, in approved colour and shade
098061 1.5mm thick. Sheet Sqm 430.32
098062 1.5mm thick. Tile Sqm 456.07
098063 2.0mm thick sheet Sqm 483.98
098064 2.0mm thick tile Sqm 594.30
098070 Providing and fixing rubber floor tiles with approved
rubber adhesive as per manufacturers specification
on the existing floor complete in all respect in all
colour and shades :
098071 Plain rubber tiles conforming to IS: 809 1.5mm thick Sqm 864.64
098072 Plain rubber tiles conforming to IS: 809 2.0mm thick Sqm 972.09
098073 LP stud range conforming to IS: 809 size Sqm 921.03

610x610mm, 2.0mm thick
098076 Anti-static rubber tiles plain / stud (conforming to Sqm 1545.05
BS: 2050 size 610x610mm, 2.0mm thick (Black
only)
098080 Providing and laying vitrified ceramic paver tiles
conforming to Group B-II, Clause 5.1 (for abrasion
resistance) of IS : 15622 of manufacturers
approved by railway in all colours, shades and
design as approved by the Engineer-in-Charge in
floors and landings over 20mm thick bed of cement
mortar 1:4 (1cement : 4 coarse sand) including
pointing with polymer based grout of matching
shade complete of size :
098081 100x100x15mm Sqm 1068.87 0.094
098082 200x200x15mm Sqm 988.51 0.094
098083 300x300x15mm Sqm 1048.04 0.094
098084 Deduct for using 12mm thick tile instead of 15mm Sqm 133.57
thick
098090 Laying 80 mm thick oversized stone ballast 75 mm Sqm 133.66
to 100 mm gauge in soling of floors, hand packed
including hand packing, filling voids with sand and
watering, ramming and leveling
098100 Providing and fixing aluminium strips 40mm deep metre 70.64
and 2mm thick in joint of terrazzo floor
Cement
Qty.(qtl.)
098110 Providing and fixing glass strips in joints of terrazzo
/ cement concrete floors
098111 40mm deep and 4mm thick metre 24.38
098112 40mm deep and 6mm thick metre 27.51
MARBLE WORK
099010 Marble work (table rubbed and polished) for wall
lining (veneer work), dado, skirting etc over 12mm
including pointing with white cement mortar 1:2
(1white cement: 2marble dust) with an admixture of
pigment to match the marble shade. (To be secured
to the backing by means of cramps, which shall be
paid for separately) White Marble – Raj Nagar Plain,
18mm thick
099011 Area of slab 0.10 Sqm to 0.2 Sqm Sqm 1855.34 0.067
099012 Area of slab over 0.2 Sqm but upto 0.5 Sqm Sqm 1906.36 0.067
099013 Area of slab over 0.5 Sqm Sqm 1918.49 0.067
099020 Providing and fixing 18mm thick mirror polished,
machine cut for kitchen platforms, vanity counters,
facias and similar locations of required size of
approved shade, colour and texture laid over 20mm
thick base cement mortar 1:4 (1cement: 4coarse
sand) with joints treated with white cement, mixed
with matching pigment, epoxy touch ups, including
rubbing, curing etc. complete at all levels. Abu plain
white marble/Rajnagar plain white marble/ Udaipur
Green Marble/ Zebra Black Marble
099021 Area of each slab upto 0.10 Sqm Sqm 1174.34 0.087
099022 Area of each slab over 0.10 Sqm but upto 0.20 Sqm Sqm 1262.98 0.087
099023 Area of slab each over 0.20 Sqm but upto 0.50 Sqm Sqm 1271.85 0.087
Abu plain white marble
099024 Area of each slab over 0.50 Sqm but upto 1.0 Sqm Sqm 1380.09 0.087
099025 Area of each slab over1.0 Sqm Sqm 1425.50 0.087
machine cut for kitchen platforms, vanity counters
facias, dados and skirtings and similar locations of
required size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1cement: 4coarse sand) with joints treated with
white cement, mixed with matching pigment, epoxy
touchups, including rubbing, curing. etc. complete at
all levels
099031 Granite Black. Area of slab upto 0.10 Sqm Sqm 2285.49 0.087
099032 Granite Black. Area of slab 0.10 Sqm to 0.2 Sqm Sqm 2380.48 0.087
099033 Granite Black. Area of slab over 0.2 Sqm but upto Sqm 2507.10 0.087
0.5 Sqm
1.0 Sqm
Cement
Qty.(qtl.)
2.0 Sqm or larger
machine cut for kitchen platforms, vanity counters
facias, dados and skirtings and similar locations of
touchups, including rubbing, curing. etc .complete at
all levels
099041 Granite Pink/Grey. Area of slab upto 0.10 Sqm Sqm 1895.23 0.057
099042 Granite Pink/Grey. Area of slab 0.10 Sqm to 0.2 Sqm Sqm 1896.71 0.057
099043 Granite Pink. Area of slab over 0.2 Sqm but upto 0.5 Sqm 2446.13 0.057
Sqm
Sqm
Sqm Or larger
099050 Providing and fixing 40mm thick Cuddapah stone
polished, machine cut for kitchen platforms, vanity
counters facias, dados and skirting and similar
locations of required size, laid over 20mm thick base
cement mortar 1:4 (1cement: 4coarse sand) with
joints treated with white cement, mixed with
matching pigment, epoxy touchups including
rubbing, curing etc. complete at all levels
099051 Area of slab upto 0.5 Sqm Sqm 1372.90 0.087
099053 Area of slab over 1.0 Sqm but upto 2.0 Sqm or Sqm 1852.35 0.087
099060 larger
Extra for providing edge moulding to 16mm to
20mm thick marble/granite stone counters, vanities
etc including machine polishing to edge to give high
gloss finish etc. complete as per design approved by
the Engineer-in-Charge
099061 Marble work mete 122.13
099062 Granite work metre 155.70
099063 Cuddapah stone metre 138.97
099070 Extra for cutting groove upto 5mm wide and 6mm
deep for drip course
099071 In Marble work Sqm 78.37
099072 In Granite work Sqm 134.41
099073 In Cuddapah stone Sqm 119.01
099080 Polished stone tile work for wall lining (dado) over
12mm thick bed of cement mortar 1:3, including
pointing in white cement with an admixture of
pigment to match the stone shade with tiles of all
size upto 300 x 300 mm
099081 8 mm thick pink/grey granite tiles Sqm 1296.92 0.067
Cement
Qty.(qtl.)
099082 8mm thick superior quality black granite tiles Sqm 1227.88 0.067
099083 8mm thick superior quality (RUBY Red) granite tiles Sqm 1241.24 0.067
099084 8mm thick marble tiles Sqm 939.69 0.067
099090 Extra for fixing marble/granite stone over facia and metre 117.09
drops of width upto 150mm with epoxy resin based
adhesive (Araldite or equivalent) including cleaning
etc. complete
099100 Extra for providing opening of required size and
shape for wash basins/ kitchen sink / Pillar tap etc in
kitchen platform, vanity counters and similar
location in marble / stone work. including rubbing
and polishing of cut edges etc complete. No
deduction for opening area shall be made from
099101 parent
Opening item
of area upto 100 sq cm Each 105.97
Opening
099102 Opening of area above 100 sq cm Each 335.34
Opening
099110 Providing and fixing cramps of required size and
shape in RCC/ CC backing with cement mortar 1:2
(1cement: 2 fine sand) including drilling necessary
hole in stones and embedding the cramp in the hole
(fastener to be paid separately)
099111 Gunmetal cramps Kg 454.08 0.007
099112 Stainless steel cramps Kg 521.82 0.007
099120 Providing and fixing expansion hold fasteners on CC
/ R.C.C. surface backing including drilling necessary
holes and the cost of bolts etc. complete
099121 Wedge expansion type. Fastener with threaded dia Each 26.06
1/4 Inch or 6mm
3/8 inch or 10mm
1/2 Inch or 12mm
099130 Providing and fixing copper pins 7.5cm long of 6mm Each 17.85 0.007
diameter in cement mortar 1:2 (1cement: 2 fine
sand) including making necessary chases
099140 Providing and fixing stone dowel 10x5x2.5cm cut to Each 17.36 0.007
double wedge shape as per design in cement mortar
1:2 (1 cement : 2 fine sand) including making
necessary chases
099150 Extra for provision of motif tiles on walls over item Sqm 290.10
095010
machine cut for floors and similar locations of
touchups, including rubbing, curing etc. complete at
all levels
099161 Granite Black. Area of slab upto 0.10 Sqm Sqm 2124.67 0.087
099162 Granite Black. Area of slab 0.10 Sqm to 0.2 Sqm Sqm 2219.74 0.087
Cement
Qty.(qtl.)
0.5 Sqm
099164 Granite Black. Area of slab over 0.5 Sqm but upto sqm 2491.29 0.087
1.0 Sqm
2.0 Sqm or larger
machine cut for floors and similar locations of
touchups, including rubbing, curing etc. complete at
all levels
099171 Granite Pink/Grey. Area of slab upto 0.10 Sqm Sqm 1734.41 0.087
099172 Granite Pink/Grey. Area of slab 0.10 Sqm to 0.2 Sqm Sqm 1735.98 0.087
Sqm
Sqm
Sqm Or larger
099180 Providing and fixing 25mm thick flame cut/machine
cut for floors /stairs and similar locations of required
size of approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1cement:
4coarse sand) with joints treated with white cement,
mixed with matching pigment, epoxy touchups,
including rubbing, curing etc. complete at all levels
099181 Granite Pink/Grey - Area of slab upto 0.10 Sqm Sqm 2405.17 0.087
099182 Granite Pink/Grey - Area of slab 0.10 Sqm to 0.2 Sqm 2626.27 0.087
Sqm
099183 Granite Pink - Area of slab over 0.2 Sqm but upto Sqm 3137.62 0.087
0.5 Sqm
1.0 Sqm
2.0 Sqm Or larger
099186 Extra for providing 40mm thick flame cut granite in Sqm 20% of
lieu of 25 mm from item 099181 to 099185 respective
items
099190 Providing and fixing 40mm thick Cuddapah stone
polished, machine cut for floors and similar
locations of required size, laid over 20mm thick base
cement mortar 1:4 (1cement: 4coarse sand) with
joints treated with white cement, mixed with
matching pigment, epoxy touchups including
rubbing, curing etc. complete at all levels
099191 Area of slab upto 0.5 Sqm Sqm 1213.70 0.087
Cement
Qty.(qtl.)
099193 Area of slab over 1.0 Sqm but upto 2.0 Sqm or Sqm 1697.31 0.087
larger
099200 Supplying and applying surface hardener for sqm 247.15
concrete floors ready to use, specially graded, non
metallic and mineral aggregate dry shake surface
hardener free from oil and grease to be sprinkled at
9 kg/sqm of surface area. Complete with finishing
099210 Providing and fixing 10mm (± 0.2mm) thick heavy Sqm 915.22 0.087
duty, full-body homogeneous, anti-algal, all weather
resistant, exterior use Paving vitrified tiles of size
upto 400mmx400mm in approved shade, colour &
quality, having anti-skid matt finish surface with
plain or projected texture. Tiles to be laid on 20 mm
average thick cement mortar bed of 1:4 (1 cement :
4 coarse sand) with all labour, material complete job
099220 Providing and fixing 50 mm thick (size Sqm 911.02 0.087
300mmx300mm) M 30 grade precast concrete
studded tiles in approved colour manufactured by
Vibro Compaction process using jointless FRP moulds
to achieve smooth joint finish. Tiles to be laid on 20
mm average thick cement mortar base of 1:4 (1
cement : 4 coarse sand) with all labour, material and
transportation etc. as a complete job
099230 Providing and fixing Group-25 Rectified Tiles of 10 Sqm 692.07 0.087
mm ± 0.5 mm thickness of sizes upto 605 mm x 605
mm on floors having skid free, smooth surface of
any colour, shade and design as approved by
Engineer Incharge having abrasion resistance of
25000 revolutions as per the PEI methodology; laid
over 20 mm thick cement mortar of 1:4 (1 cement :
4 coarse sand) and joints filled with matching
grouting material; complete work
099240 Providing & fixing Paving Slabs (Flag Stone) 400mm Sqm 1457.08
x 400mm x 80mm thick, manufactured with wet
press vacuum dewatered technology with pimple
finish on top, having 5mm chamfer edges in
approved colour and crushing strength of 50
N/sq.mm to be fixed on uniform bedding of 50mm
thick fine sand and joints duly filled with sand
099250 Providing & fixing 400x400x35mm thick reflective Sqm 666.28 0.094
lacquer coated cement designer tiles, manufactured
in wet cast vibration system in two layers, 10-12mm
thick top layer consisting of graded stone
aggregates, silica sand, Bayer colour. Surface of tiles
with anti-skid texture with lacquer coating with
flexural strength of 4 N/sq.mm, to be fixed on 20mm
thick 1:4 cement mortar, as directed by engineer-in-
charge
New Items To Be Added By Zonal Railway
099310
099320
IR's Unified Standard Schedule Of Rates 2010 Chapter-10 : Roofs and Ceiling
CHAPTER - 10 : ROOFS AND CEILINGS
Cement
Item. No. Description Unit Rate (Rs.)
Qty.(qtl.)
C G S SHEET ROOFING
101010 Providing corrugated G.S. sheet roofing,
including vertical/curved surface, fixed with
polymer coated J or L hooks, bolts and nuts
8mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with
white lead and including a coat of approved
steel primer and two coats of approved paint
on overlapping of sheets complete (upto any
pitch in horizontal/vertical or curved surfaces)
excluding the cost of purlins, rafters and
trusses and including cutting to size and shape
wherever required
101011 1.00mm thick with zinc coating not less than Sqm 908.43
275gm/ sqm
275gm/ sqm
275gm/ sqm
101020 Extra for straight cutting in C.G.S. sheet
roofing for making opening of area exceeding
0.4sqdm for chimney stacks, sky light etc.
101021 1.00mm thick metre 22.05
101022 0.80mm thick metre 17.64
101023 0.63mm thick metre 17.64
101030 Extra for circular cutting in C.G.S. sheet
roofing for making opening of area exceeding
40 sqdm
101031 1.00mm thick metre 127.43
101032 0.80mm thick metre 101.78
101033 0.63mm thick metre 101.78
101040 Providing ridges or hips of width 60cm overall
width plain G.S. sheet fixed with polymer
coated J or L hooks, bolts and nuts 8mm dia.
G.I. limpet and bitumen washers complete
101041 0.80mm thick with zinc coating not less than metre 419.93
275gm/ sqm
275gm/ sqm
101050 Providing valleys 90cm wide overall in plain
G.S. sheet fixed with polymer coated J or L
hooks, bolts and nuts 8mm dia. G.I. limpet
and bitumen washers complete
101051 1.60 mm thick with zinc coating not less than metre 833.34
350gm/ sqm
Cement
Qty.(qtl.)
101052 1.00 mm thick with zinc coating not less than metre 556.58
350gm/ sqm
101060 Providing flashing of 40cm overall width in metre 298.29
plain, G.S. sheet, 1.00mm thick with zinc
coating not less than 275gm/ sqm., fixed with
polymer coated J or L hooks, bolts and nuts,
G,I, limpet and bitumen washer complete,
bent to shape and fixed in wall with cement
mortar 1:3 (1cement: 3coarse sand)
101070 Providing and fixing 15cm wide 45cm over all
semi circular plain G.S. sheet gutter with iron
brackets 40x3mm size, bolts, nuts and
washers etc. including making necessary
connections with rain water pipes complete
275gm/ sqm
275gm/ sqm
101080 Supply & installation of precoated galvanized Sqm 539.62
iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50mm +/- 5% total coated
thickness (TCT) thick Zinc coating 120gsm as
per IS:277 in 240mpa steel grade, 5-7microns
epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet
should have protective guard film of 25
microns minimum to avoid scratches while
transportation and should be supplied in single
length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed
using self drilling / self tapping screws of size
(5.5 x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm
diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with
white lead complete upto any pitch in
horizontal/vertical or curved surfaces
trusses and including cutting to size and shape
wherever required
101090 Providing and fixing precoated galvanised 0 0.00
steel sheet roofing accessories 0.50mm +/-
5% total coated thickness (TCT) thick Zinc
coating 120 gsm as per IS:277 in 240mpa
steel grade, 5-7 microns epoxy primer on both
side of the sheet and polyester top coat 15-18
microns using self drilling/self tapping screws
or with polymer coated J or L hooks, bolts and
nuts and or G.I. seam bolts and nuts, G.I.
plain and bitumen washers complete :
101091 Ridges plain (500-600mm) metre 369.22
Cement
Qty.(qtl.)
101092 Flashings/Aprons.(Upto 600mm) metre 399.07
101093 North light curves metre 497.75
101094 Barge board (Upto 300mm) metre 443.25
101095 Crimp curve metre 61.30
101096 Gutter (600mm over all girth) metre 577.26
A.C. SHEET ROOFING & A.C. Accessories

102010 Providing and fixing asbestos cement 6 mm Sqm 269.16
thick corrugated / semi corrugated sheet
roofing upto any pitch and fixing with polymer
coated J or L hooks, bolts and nuts 8mm dia.
G.I. plain and bitumen washers complete
trusses :
102020 Extra for straight cutting in A.C. corrugated, metre of 17.25
semi-corrugated 6mm thick sheet roofing for periphery
making openings of area exceeding 40sq.
decimeter for chimney stacks, sky lights etc.
102030 Extra for circular cutting in A.C. corrugated/ metre of 47.66
semi-corrugated 6mm thick sheet roofing for periphery
making openings of area exceeding 40 sq.
Decimeter
102040 Providing and fixing ridges and hips in
asbestos cement sheet roofing
102041 One piece plain angular ridges metre 172.85
102042 Serrated or plain wing adjustable ridges metre 230.21
102043 Close fitting adjustable ridges metre 252.21
102044 North light adjustable ridges metre 213.02
102045 Unserrated adjustable hips metre 212.99
102050 Providing and fixing asbestos cement roofing metre
accessories with polymer coated J or L hooks,
bolts and nuts and or G.I. seam bolts and
nuts, G.I. plain and bitumen washers complete
102051 Apron flashing pieces metre 162.24
102052 Eave’s filler pieces metre 120.58
102053 North light and ventilator curves metre 286.45
102054 Barge boards metre 145.67
102055 Ridge finials Pair 134.49
102056 Curved barge boards for north light curves Each 216.50
102057 Expansion joints for ridges Each 305.29
102058 Expansion joints for north light curves Each 264.93
102059 S type louvers metre 85.60
NON-A.C. SHEET ROOFING & Accessories
Cement
Qty.(qtl.)
103010 Providing and fixing non-asbestos high impact Sqm 444.66
Polypropylene reinforced cement 6 mm thick
corrugated sheets (as per IS: 14871) roofing
up to any pitch and fixing with polymer coated
J or L hooks, bolts and nuts 8mm dia. G.I.
plain and bitumen washers or with self drilling
fastener and EDPM washers etc. complete
trusses including cutting to size and shape
wherever required
103020 Extra for straight cutting in non-asbestos metre of 17.25
Polypropylene reinforced cement corrugated/ peripher
semi-corrugated 6mm thick sheet roofing for y
making openings of area exceeding 40sq.
decimeter for chimney stacks, sky lights etc.
103030 Extra for circular cutting in non-asbestos metre of 47.66
Polypropylene reinforced cement corrugated/ peripher
semi-corrugated 6mm thick sheet roofing for y
making openings of area exceeding 40 sq.
decimeter
103040 Extra for providing and fixing wind ties of metre 84.63
40x6mm flat iron section complete with hooks,
nuts, washers etc.
103050 Providing and fixing ridges and hips in non-
asbestos fibre cement high impact
Polypropylene reinforced roofing with suitable
fixing accessories or self drilling fastener and
EDPM washer etc. complete
103051 Corrugated serrated adjustable ridges metre 514.40
103052 Plain wing adjustable ridges metre 536.48
103053 Close fitting adjustable ridges metre 502.59
103054 Unserrated adjustable hips metre 579.79
103060 Providing and fixing non-asbestos fibre
cement high impact Polypropylene reinforced
roofing accessories in all colours with polymer
coated J or L hooks, bolts and nuts and or G.I.
seam bolts and nuts, G.I. plain and bitumen
washers or with self drilling fastener and
103061 EDPM washer
Corrugated etc. pieces
Apron complete metre 305.66
103062 Eave’s filler pieces metre 256.42
103063 North light curves metre 454.58
103064 Ventilator Curves metre 563.47
103065 Barge boards metre 391.17
103066 Ridge finials Pair 201.74
103067 Special north light curves metre 685.07
103068 S type louvers metre 298.62
Cement
Qty.(qtl.)
103070 Providing and fixing flat iron brackets 50x3mm metre 26.24
size with necessary bolts, nuts and washers
etc. for fixing asbestos cement/ G.S. sheet
gutters with purlins to be fixed at suitable
interval, as per direction of engineer-in-charge
103080 Supplying fitting/ fixing corrugated fibre glass Sqm 426.25
reinforced perspex sheet 3 mm. thick on
existing wooden or iron frames / purlins with
Contractor’s stitching bolts, hook bolts, crank
bolts, coach screws, nuts, limpets, G.I and
bitumen washers etc. complete
103090 Providing & fixing machine made UV stabilised
fiberglass reinforced plastic sheet roofing upto
any pitch including fixing with polymer coated
`J' or `L' hooks, bolts and nuts 8mm dia. G.I.
plain/bitumen washers complete but excluding
the cost of purlins, rafters, trusses etc. The
sheets shall be manufactured out of 2400 TEX
panel rovigs incorporating minimum 0.3%
Ultra-violet stabilizer in resin system under
approximately 2400 psi and hot cured. They
shall be of uniform pigmentation and thickness
without air pockets and shall conform to IS
12866. The sheets shall be opaque or
translucent, clear or pigmented, textured or
smooth as specified
103091 2mm thick corrugated / 2mm thick Profile Sqm 1172.26
Sheets
103092 2mm thick flat sheets Sqm 1051.19
103093 Providing & fixing fibre glass reinforced 90cm Rm 2224.04
wide, 4mm thick valley gutter, having two
coats of U/V stabilised gel coat as top coating
giving glossy smooth surface. To be fixed with
suitable clamp made of 25mm MS flat of 3mm
thickness, provided at 1m interval, complete
with required nuts/bolts
104000 Extra over item no. 103010, 103050 & 103060 Each 25% of
for using corrugated sheets and fittings having the
polyester coating of approved shade on the respective
top surface instead of natural cement colour items
sheets and fittings
FLAT ROOFS
104010 10cm thick (average) mud phaska of damped
brick earth on roofs laid to slope consolidated
and plastered with 25mm thick mud mortar
with bhusa at 35 kg per cum. of earth and
gobri leaping with mix 1:1 (1clay: 1cow dung)
and covered with tile bricks grouted with
mixed with 2% of integral water proofing
compound by weight of cement and finished
neat – upto floor two level
Cement
Qty.(qtl.)
104011 With F.P.S. flat brick tiles of class designation Sqm 256.82 0.031
10
104012 With machine moulded F.P.S. brick tiles of Sqm 270.06 0.031
class designation 12.5
104020 Extra over Items 104012 above floor two level Sqm 51.36
for every floor or part thereof
104030 Extra for every additional 1cm thickness of Sqm 5.95
mud phaska
104040 Providing and laying FPS brick tiles of class Sqm 166.72 0.091
designation 10 over mumty roofs grouted with
mixed with 2% of integral water proofing
compound by weight of cement, over a 12mm
layer of cement mortar 1:3 (1cement: 3fine
sand) and finished neat
104050 Providing and laying pressed clay tiles (as per Sqm 328.12 0.198
approved pattern 20mm nominal thickness
and of approved size) on roofs jointed with
mixed with 2% integral water proofing
compound laid over a bed of 20mm thick
and finished neat complete
104060 Lime concrete terracing on roofs average Sqm 317.89
thickness 10cm laid to fall with 25mm
nominal size brick aggregate and 50% lime
mortar 1:2 (1lime putty: 2surkhi) rammed
and finished with gur and belgiri treatment
complete including rounding of junctions with
parapet wall complete – upto floor two level
104070 Lime concrete terracing on roofs, average Sqm 374.27 0.031
thickness 10cm laid to fall with 25mm
nominal size brick aggregate and 50% lime
mortar 1:2 (1lime putty: 2surkhi) rammed
and finished with gur and belgiri treatment
complete and covered with FPS flat brick tiles
of class designation 10 grouted with cement
mortar 1:3 (1cement: 3fine sand) mixed with
2% integral water proofing compound by
weight of cement, over 12mm layer of cement
mortar 1:3 (1cement: 3fine sand) and finished
neat– upto floor two level
104080 Add or deduct over Items 104060 and 104070 Sqm 17.40
for every additional/less 5mm thickness of
lime concrete terracing
104090 Extra over Items 104060, 104070 and 104080 Sqm 28.82
for using LUNA, RTC or equivalent treatment
in place of Bel and Gur treatment. (Quantity to
be used as per specifications of the
Manufacturer)
104100 Extra over Items 104060 and 104070 above Sqm 34.61
floor two level for every floor or part thereof

Cement
Qty.(qtl.)
104110 Picking upto a minimum depth of 50 mm cum 3056.48
including a) removing dismantled concrete
and thorough cleaning and washing of
exposed surface to make it free of dislodged
particles and dust and b) redoing of lime
concrete terracing with 20mm nominal size
brick aggregate and 50% lime mortar 1:2
(1lime putty: 2surkhi) rammed and finished
with gur and belgiri treatment complete
trowelled smooth to a polished finish– upto
floor two level
104120 Extra over Items 104110 above floor two level cum 91.69
for every floor or part thereof
104130 Providing gola 75x75mm in cement concrete metre 56.32 0.031
1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 10mm and down gauge) including
finishing with cement mortar 1:3 (1cement:
3fine sand) as per standard design -in
75x75mm deep chase
104140 Making khurras 45x45cm with average Each 95.44 0.060
minimum thickness of 5cm cement concrete
aggregate of 20mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm
cement plaster 1:3 (1cement: 3coarse sand)
and a coat of neat cement rounding the edges
and making and finishing the outlet complete
104150 Providing sand stone slab for roofing and
laying them in cement mortar 1:4 (1cement:
4coarse sand) over wooden karries or R.C.C.
battens etc (Karries and battens etc to be paid
separately) including pointing the ceiling joints
with cement mortar 1:3 (1cement: 3fine sand)
complete
104151 Red sand stone slab, 40mm to 50mm thick Sqm 471.12 0.007
104152 White sand stone slab, 40mm to 50mm thick Sqm 438.15 0.007
WATER PROOFING
105010 Providing & laying water-proof treatment on Sqm 303.14 0.020
roof slabs by applying after preparation,
cement slurry mixed with Tapecrete acrylic
based polymer water proofing compound
(having solid content 30% ± 2, pH >7) in a
ratio of 2:1 (2 cement : 1 water proofing
compound), followed by laying of fibre glass
cloth; 2nd coat of cement slurry mixed with
acrylic based polymer water proofing
compound and a final coat of water proofing
compound brush topping having water
proofing compound, cement and c/sand @
1:2:2 by weight. Complete job to be carried
out as per specifications

Cement
Qty.(qtl.)
105020 Providing & laying corner fillet (Gola) metre 23.20 0.015
25mmx25mm size at junction of walls & slab
and pipe joints sealing by cement sand mortar
1:3 mixed with Tapecrete acrylic based
polymer water proofing compound (having
solid content 30% ± 2, pH >7) at 0.5% of
cement by weight.
105030 Painting top of roofs with residual type Sqm 90.02
petroleum bitumen of penetration 80/100 of
approved quality at 17kg per 10 sqm
impregnated with a coat of coarse sand at 60
cudm. Per 10sqm. including cleaning the slab
surface with brushes and finally with a piece of
cloth lightly soaked in kerosene oil complete
105040 Providing and laying four courses water Sqm 265.82
proofing treatment with bitumen felt over
roofs consisting of 1st and 3rd courses of
blown bitumen 85/ 25 or 90/ 15 conforming to
IS: 702 applied hot @ 1.45kg/sqm of area for
each course, 2nd course of roofing felt type 3
grade-I (Hessian base self finished bitumen
felt) conforming to IS:1322 and 4th and final
course of stone grit 6mm and down size or
pea-sized gravel spread at 6 cudm/sqm
including preparation of surface but excluding
grading complete
105050 Providing and laying six courses water Sqm 430.53
roofs consisting of first, third and fifth course
of blown bitumen 85/ 25 or 90/ 15 conforming
to IS: 702 applied hot @ 1.45, 1.20 and 1.45
kg/sqm of area respectively, second and
fourth courses of roofing felt type 3 grade I
conforming to IS: 1322 (Hessian based self
finished bitumen felt) conforming to IS: 1322
and sixth and final course of stone grit 6mm
and down size or pea- sized gravel spread at
6cudm/sqm including preparation of surface
but excluding grading complete
roofs consisting of first, third and fifth courses
of blown or/ and residual bitumen applied hot
at 1.45, 1.20 and 1.70kg per square metre of
area respectively, second and fourth courses
of roofing felt type 2 grade I (fibre base self
finished bitumen felt) sixth and final course of
stone grit 6mm and down size or pea-sized
gravel spread at 6cudm/sqm including
preparation of surface, excluding grading
complete

Cement
Qty.(qtl.)
roofs consisting of first, third and fifth courses
of blown or/ and residual bitumen applied hot
at 1.45, 1.20 and 1.70kg/sqm of area
respectively, second and fourth courses of
roofing felt type 2 grade II (glass fibre base
self finished bitumen felt) and sixth and final
course of stone grit 6mm and down size or
pea-sized gravel spread at 6cudm/sqm
including preparation of surface but excluding
grading, complete
105080 Supplying and applying bituminous solution Sqm 22.88
primer on roof and or wall surface at
0.24litre/sqm
105090 Deduct for omitting in water proofing Sqm 9.17
treatment final course of spreading stone grit
6mm down size or pea-sized gravel at 6
cudm/sqm
105110 Providing and laying in situ over roofs seven Sqm 477.28
course water proofing treatment with APP
(Atactic Poly Propylene) modified Polymeric
membrane 1.5mm thick of 2.25kg/sqm
weight.7th, the top most layer shall be of
specified surface finish which shall be paid for
separately
105120 Providing and laying in situ over roofs five Sqm 339.23
separately
105130 Providing and laying in situ over roofs seven Sqm 579.50
separately
105140 Providing and fixing APP (Atactic
Polypropylene polymer) modified prefabricated
five layer water proofing membrane of
specified thickness, black finished reinforced
with glass fibre matt over a coat of bitumen
primer for bitumen membrane @
0.40litre/sqm by the same membrane
manufacturer of density at 25oC, 0.87-
0.89kg/ litre and viscosity 70- 160cps
105141 2mm thick (for corrugated roof sheets) Sqm 357.25
105142 3mm thick Sqm 456.26

Cement
Qty.(qtl.)
105150 Providing and laying APP (Atactic Sqm 449.88
Polypropylene polymer) modified prefabricated
seven layer 3mm thick water proofing
membrane, reinforced with non-woven
polyester matt over a coat of bitumen primer
for bitumen membrane @ 0.25 Kg/sqm. by the
same membrane manufacture as per
specification
Note for Items 105020 to 105150 : The laying
of membrane shall be got done through the
authorized applicator of the manufacturer of
membrane, if possible
105160 Extra for covering top of membrane with Sqm 53.66
Geotextile 120 gsm non woven 100%
polyester of thickness 1 to 1.25mm thickness
bonded to the membrane by heating by
105170 buytane torch
Cutting to 'V' section, cleaning and washing metre 10.77
cracks for repairs to roof. Grouting with
cement slurry 1:1 and plastering over crack
with cement mortar 1:3
105180 Cutting to 'V' section, cleaning and washing metre 18.30
cracks for repairs to roof. Grouting with
special compound such as valamoid or any
other similar compound
105190 Grading roof for water proofing treatment with-
105191 Cement concrete 1:2:4 (1 cement, 2 coarse cum 1602.96 3.200
sand and 4 graded stone aggregate of 20mm
nominal size)
105192 Cement mortar 1:3 (1 cement, 3 coarse sand) cum 1361.60 5.100
CEILING :
106010 Providing and fixing insulating board ceiling of
approved quality as per IS:3348 with
necessary nails etc. complete (frame work to
be paid separately)
106011 Natural colour insulating board, 12mm thick Sqm 412.74
106012 White/ivory face insulating board, 12mm thick Sqm 492.28
106013 Flame retardant face insulating board, 12mm Sqm 486.74
thick
106020 Providing and fixing flat pressed 3 layer Sqm 510.70
medium density particle board or graded
particle board (Grade-1) IS: 3087 marked
12mm thick in ceiling with necessary nails etc.
complete (frame work to be paid separately)
106030 Extra for circular cutting and waste in ceiling
with :
106031 Insulating board Sqm 120.80
106032 Particle board Sqm 132.99
106040 Extra over 106011 to 106013 and 106020 for Sqm 83.67
providing and fixing ceiling to curved surfaces
in narrow widths

Cement
Qty.(qtl.)
106050 Providing and fixing false ceiling with 12mm Sqm 251.97
thick plain/semi perforated or with design
ceiling tiles of BWP type phenol formaldehyde
synthetic resin bonded pressed particle board
conforming to IS:3087 finished with a coat of
aluminium primer on both sides & edges and
two coats of synthetic enamel paint of
approved quality on exposed face fixed to a
grid made out of anodised aluminium (with 15
micron anodic coating) T-sections 35 x 15 x
1.5mm size main runners and cross runners
23.5x19x1.5 mm fixed to main runners placed
600 mm centre to centre both ways so as to
form a grid of 600 mm square. The frame
work shall be suspended from ceiling by level
adjusting hangers of 6mm dia M.S. rod fixed
to roof slab by means of ceiling cleats. The
suspenders shall be placed 600 x 1200 mm
centre to centre including fixing to the frame
with C.P. brace screws and applying a priming
coat of zinc chromate yellow primer
(aluminium frame work and hangers shall be
paid separately)
106060 Extra for providing 3mm thick translucent Sqm 564.78
white acrylic plastic sheets of approved quality
in false ceiling instead of 12mm thick plain/ or
with design particle board ceiling tiles in Item
106050
106070 Providing and fixing 8mm thick non-asbestos Sqm 427.65
multipurpose cement board, reinforced with
cellulose fibre, manufactured through auto-
claving process (high pressure steam-cured)
as per IS:14862 with suitable fibre cement
with screws (framework to be paid separately)
106080 Providing & fixing PVC multiple hollow section Sqm 1668.37
of approved colour with tongue and groove
fixture having wall thickness 1mm and overall
thickness 12mm in ceiling on existing frame
work
106090 Providing and fixing Tiled False Ceiling Tiles Sqm 396.55
of approved materials of size 595x595mm in
true horizontal level suspended on interlocking
metal grid of galvanized steel sections
(galvanized @ 170gsm/sqm) consisting of
main “T” runners suitably spaced at joints to
get required length and of size 24x38mm
made from 0.30mm thick (minimum) sheet
spaced at 1200mm centre to centre and cross
“T” of size 24x25mm made of 0.3mm thick
(min.) sheet, 1200mm long ... contd. -

Cement
Qty.(qtl.)
... contd. - spaced between main “T” at
600mm centre to centre to form a grid of
1200x600mm and secondary cross “T” of
length 600mm and size 24x25mm made of
0.30mm thick minimum sheet to be
interlocked at middle of the 1200x600mm
panel to form grids of 600x600mm wall angle
of size 21x21x 3mm and laying false ceiling
tiles of approved texture in the grid including,
wherever required, cutting/making openings
for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. ... contd. -
... contd. - Main “T” runners to be suspended
from ceiling using GI slotted cleats fixed to
ceiling wit 6mm dia and 50mm long dash
fasteners, 4mm dia GI adjustable rods with
galvanized level clips spaced at 1200mm
centre to centre along main “T”, bottom
exposed width of 24mm of all T-sections shall
be pre painted with polyester paint, all
complete at all heights as per specifications
drawings and as directed by Engineer-in-
charge. (The rate is excluding the cost of tiles
which will be paid separately)
106100 Providing and fixing at all height false ceiling Sqm 627.97
of 12.5mm thick tapered edge gypsum board
conforming to IS: 2095-Part I, including
special sections power pressed from M.S.
sheet and galvanised with zinc coating of
grade 350 as per IS: 277 and consisting of
angle cleats of size 25mm x 1.6mm with
flanges of 22mm and 37mm at 1200mm
centre to centre one flange fixed to the ceiling
with stener 12.5mm dia x 40mm long with
6mm dia bolts to the angle hangers of
25x25x0.55mm of required length ... contd. -
... Contd. -- and other end of angle hanger
being fixed with nut and bolts to G.I. channels
45x15x0.9mm running at the rate of 1200mm
centre to centre to which the ceiling section
0.5mm thick bottom wedge of 80mm with
tapered flanges of 26mm each having clips of
10.5mm at 450mm centre to centre shall be
fixed in a direction perpendicular to G.I.
channel with connecting clips made out of
2.64mm dia x 230mm long G.I. wire at every
junction including fixing the gypsum board
with ceiling section and perimeter channels
0.5mm thick 27mm high having flanges of
20mm and 30mm long, - contd. ...

Cement
Qty.(qtl.)
... contd. - the perimeter of ceiling fixed to
wall/ partition with the help of rawl plugs at
450mm centre to centre with 25mm long drive-
all screws @ 230mm interval including jointing
and fixing to a flush finish of tapered and
square edges of the gypsum board with
recommended filler, paper tapes, finisher and
two coats of primer suitable for gypsum board
as per manufacturers specification and also
including the cost of making openings for light
fittings, grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed all
complete as per drawing and specification and
direction of the Engineer-in-Charge but
excluding the cost of painting
106110 Providing 10mm thick Plaster of Paris (gypsum
anhydrous) ceiling upto a height of 5m above
floor level over 1st class kail or similar wood
strips 25x6mm with 10mm gap in between
and reinforced with rabbit wire mesh fixed to
wooden frame (frame work to be paid
separately)
106111 Flat surfaces Sqm 599.29
106112 Curved surfaces Sqm 664.95
106120 Extra for any sunk or raised Moulding in the Sqm 174.24
Plaster of Paris (gypsum anhydrous) ceiling
106130 Extra for providing Plaster of Paris (Gypsum Sqm 50.38
anhydrous) ceiling above 5 metres height
from floor level for every additional metre
106140 Providing and fixing Dasuti Cloth ceiling of Sqm 52.26
approved quality with necessary nails / Screws
etc. complete (frame work and beading to be
paid separately)
106150 Providing, cutting and fixing with screws on Sqm 73.85
existing wooden / Aluminium / M. S. frames,
thermocol board 10 to 15 mm (as directed by
the Engineer) thick, of approved shape and
sizes and in regular pattern in panels in ceiling
106160 Providing and fixing thermal insulation of Sqm 352.21
ceiling (under deck insulation) with Resin
Bonded Fibre glass wool conforming to IS:
8183 density 24kg/m3, 50mm thick, wrapped
in 200G Virgin polythene bags fixed to ceiling
with metallic cleats (50x50x3mm) @ 60cm
and wire mesh of 12.5mm x 24g wire and
mesh, for top most ceiling of building

Cement
Qty.(qtl.)
106170 Providing and fixing thermal insulation with Sqm 199.74
Resin Bonded Fibre glass wool conforming to
IS: 8183 density 16kg/m3, 50mm thick,
wrapped in 200G Virgin Polythene bags placed
over existing false ceiling and held in position
by criss-crossing GI wire
106180 Thermal Insulation of roofing with Expanded
polystyrene fixed with suitable adhesive to the
false ceiling as per the directions of the
Engineer-in-Charge
106181 With Type N- Normal 50mm thick Sqm 222.03
106182 With Type SE- Self Extinguishing type, 50mm Sqm 243.75
thick
106190 Providing and fixing circular / hexagonal M. S. Kg 82.34
sheet ceiling fan box with clamp of internal dia
140 mm., 73 mm height, 3 mm thick rim, top
and bottom lid of 1.5 mm M. S. Sheet. Lid
shall be screwed into M.S. box by means of 3
mm. round headed screws, clamps shall be
made of 12 mm. dia M. S. bar bent to shape
or all dimensions as specified by Engineer in
charge as per requirement including finishing
the slab surface
106200 Providing and fixing wooden beading of
specified size with square cut or bevelled
edges and mitred joints in ceiling with : (Note
: This item is not to be paid, if beading is
specifically included in the ceiling item)
106201 50X12 mm Teak or similar wood beading metre 71.42
106202 30X10 mm Teak or similar wood beading metre 37.40
106203 50X12 mm Kail or similar local wood beading metre 29.74
106204 30X10 mm Kail or similar local wood beading metre 16.56
106210 Dismantling and removing old wooden ceiling Sqm 37.72
and stacking upto 50 metres or part thereof
106220 Dismantling and removing Particle Board, Sqm 55.30
Asbestos or similar sheets ceiling and stacking
upto 50 metres or part thereof
TILED ROOFS
107010 Supplying and fixing R.P Tiled roofing or Sqm 328.14
roofing with the similar pattern of tiles on roof
over wooden or angle battens (wooden or
angle battens and laying ridge and hip tiles to
be paid separately) excluding lacing with
Contractor's tiles
107011 Supplying and fixing Single layer Country Sqm 188.43
tiled roofing including split bamboo battens
107012 Supplying and fixing Double layer Country Sqm 376.86
tiled roofing including split bamboo battens

Cement
Qty.(qtl.)
107020 Supplying and fixing Thatch Roofing 15 Cm Sqm 59.71
thick in two layers with bamboo lining in both
directions 23 cm apart and tying complete
107030 Supplying and fixing Mangalore, R.P. or any metre 65.22 0.002
other similar type ridge or hip on cement
mortar 1:4
107040 Extra for lacing RP or Mangalore tiles or any metre 20.37
other similar tiles with contractor’s wire. (1.6
mm)
107050 Cement sand mortar ridging or hip to R.P. tiled metre 70.97 0.002
roof (1:2)
107060 Taking down and stacking Raniganj Pattern Sqm 21.41
tiles properly, single layer Labour rates only
107070 Taking down and stacking Raniganj pattern Sqm 37.41
tiles properly, double layer. Labour rates only
107080 Supplying and fixing R.P. or Mangalore Each 73.64
ventilating tiles single
107090 Supplying and fixing glass tiles (Mangalore or Each 104.42
R.P.Tiles)
107100 Removing and resetting Mangalore ridge tiles metre 30.94 0.002
in cement mortar 1 : 6
107110 Removing and resetting Mangalore flat tiles on Sqm 64.90
existing reapers
107120 Providing & fixing pressed clay tile (Mangalore Sqm 312.33
tile) 20mm nominal thickness and of approved
size and as per approved pattern ceiling on
steel frame work complete (steel frame work
to be paid separately)
107130 Providing & laying pressed clay tile ridge Sqm 135.62
(Mangalore tile) of 20mm thickness of
approved pattern ceiling over steel frame work
complete (steel frame work to be paid
separately)
RAIN WATER SPOUT AND PIPES :
108010 Providing and fixing 100mm diameter rain
water spout in cement mortar 1:4 (1 cement :
4 fine sand)
108011 Stone ware spout 60cm long Each 47.52 0.002
108012 Unreinforced concrete pipe 60cm long Each 113.26 0.002
108020 Providing and fixing M.S. holder bat clamps of
approved design to C.I. or S.C.I. rain water
pipes embedded in and including cement
concrete blocks 10x10x10cm of 1:2:4 mix
aggregate 20mm nominal size) and cost of
cutting holes and making good the walls etc.
108021 75 mm dia. Each 85.33 0.003
108022 100mm dia. Each 89.02 0.003
108023 150mm dia. Each 96.00 0.005

Cement
Qty.(qtl.)
108030 Providing, erecting and fixing on wall face
S.C.I rain water pipes including filling of joints
with spun yarn soaked in neat cement slurry
and cement mortar 1:2 (1cement: 2fine sand)
108031 75 mm dia. metre 563.91 0.003
108032 100mm dia. metre 568.19 0.003
108033 150mm dia. metre 1082.61 0.005
108040 Providing, fixing and embedding cast iron
(S&S) Class LA rain water pipes in masonry/
RCC surrounded with 12mm thick cement
mortar of the same mix that of masonry (lead
caulking will be paid for separately)
108041 75 mm dia. metre 905.97 0.066
108042 100mm dia. metre 1149.49 0.088
108043 150mm dia. metre 1862.76 0.132
108050 Providing lead caulked joints to sand cast iron
rain water pipes and fittings
108051 75 mm dia. Each 154.24
108052 100mm dia. Each 200.95
108053 150mm dia. Each 284.77
108060 Providing erecting and fixing in position on
wall face C.I accessories for rain water pipes
including filling the joints with spun yarn
soaked in neat cement slurry and cement
mortar 1:2 (1cement: 2fine sand)
108061 75 mm dia. CI Plain Bend Each 144.78 0.003
108062 100mm dia. CI Plain Bend Each 176.39 0.003
108063 150mm dia. CI Plain Bend Each 271.81 0.005
108070 CI Head Flat or Corner Type Bend
108071 75 mm dia. Each 174.11 0.002
108072 100mm dia. Each 209.53 0.002
108073 150mm dia. Each 238.17 0.003
108080 CI Plain Shoes
108081 75 mm dia. Each 150.65 0.002
108082 100mm dia. Each 188.98 0.002
108083 150mm dia. Each 238.90 0.003
108090 CI Branches (Plain)
108091 75 mm dia. single branch Each 173.88 0.003
108092 75 mm dia. double branch Each 202.91 0.005
108093 100mm dia. single branch Each 223.24 0.005
108094 100mm dia. double branch Each 255.76 0.006
108095 150mm dia. single branch Each 274.81 0.008
108096 150mm dia. double branch Each 314.40 0.009
108100 CI Offset (Plain)
108101 75 mm dia, 55mm projection Each 133.22 0.003
108102 100mm dia, 55mm projection Each 197.69 0.003

Cement
Qty.(qtl.)
108110 C.I Slotted Vent cowl
108111 75 mm dia. Each 127.65
108112 100mm dia. Each 172.72
108113 150mm dia. Each 282.94
108120 Providing, fixing & embedding sand cast iron
plain bend in masonry/RCC surrounded with
12mm thick cement mortar of same mix that
of masonry (lead caulking will be paid
separately)
108121 75 mm dia. Each 140.43 0.003
108122 100mm dia. Each 308.38 0.003
108123 150mm dia. Each 308.38 0.005
108130 Providing, fixing and embedding sand cast
iron corner type bend in masonry/ RCC
surrounded with 12mm thick cement mortar of
the same mix that of masonry (lead caulking
will be paid for separately)
108131 75 mm dia. Each 149.66 0.003
108132 100mm dia. Each 149.66 0.003
108133 150mm dia. Each 303.09 0.005
108140 Providing, fixing and embedding sand cast
iron branches plain in masonry/ RCC
surrounded with 12mm thick cement mortar of
the same mix that of masonry (lead caulking
will be paid for separately)
108141 75 mm dia single branch Each 189.21 0.003
108142 75 mm dia double branch Each 232.76 0.003
108143 100mm dia single branch Each 254.83 0.003
108144 100mm dia double branch Each 314.07 0.004
108145 150mm dia single branch Each 480.86 0.004
108146 150mm dia double branch Each 636.79 0.005
108150 Providing, fixing & embedding sand cast iron
offset plain in masonry/RCC surrounded with
12mm thick cement mortar of same mix that
of masonry (lead caulking will be paid
separately)

Cement
Qty.(qtl.)
108160 Providing and fixing on wall face unplasticised -
Rigid PVC single socketed rain water pipes
conforming to IS: 13592 Type A including
jointing with seal ring conforming to IS: 5382
leaving 10mm gap for thermal expansion.
108161 75mm dia. metre 126.39 0.007
108162 110mm dia. metre 201.61 0.001
PVC moulded fittings/ accessories for
unplasticised- Rigid PVC rain water pipes
conforming to IS: 13592 Type A including
jointing with seal ring conforming to IS: 5382
leaving 10mm gap for thermal expansion.
108171 Coupler, 75mm. Each 105.94
108172 Coupler, 110mm Each 177.18
108173 Single Pushfit Coupler, 75mm Each 157.35
108174 Single Pushfit Coupler, 110mm Each 270.36
108175 Single tee with door, 75x75x75mm Each 209.43
108176 Single tee with door, 110x110x110mm Each 338.83
108177 Single tee without door, 75x75x75mm Each 209.43
108178 Single tee without door, 110x110x110mm Each 338.83
PVC moulded bend and shoe for unplasticised-
Rigid PVC rain water pipes conforming to IS:
13592 Type A including jointing with seal ring
conforming to IS: 5382 leaving 10mm gap for
thermal expansion
108181 Bend 87.5 degree, 75mm dia bend Each 111.34
108182 Bend 87.5o, 110mm dia bend Each 185.57
108183 Shoe (Plain), 75mm dia shoe Each 146.88
108184 Shoe (Plain), 110mm dia shoe Each 244.84
108190 Providing and fixing unplasticised- PVC pipe
clips of approved design to unplasticised- PVC
rain water pipes by means of 50x50x50mm
hard wood plugs, screwed with M.S. screws of
required length including cutting brick work
and fixing in cement mortar 1:4 (1cement:
4coarse sand) and making good the wall etc.
complete
108191 75mm Each 98.00 0.001
108192 110mm Each 106.98 0.001
108200 Providing and fixing to the inlet mouth of rain Each 83.23
water pipe cast iron grating 15cm dia and
weighing not less than 440 grams
108210 Providing & Fixing Bamboo Mat Board
conforming to IS 13958-1994 to frames by
buding or studding with brass screw complete
( Frames, backing, studding to be paid
separately)

Cement
Qty.(qtl.)
108211 3 mm thickness Sqm 693.32
ADDITIONAL WATER-PROOFING ITEMS
109010 Surface protection of jack arch roofs with Sqm 372.67 as at site
cementitious waterproofing compound incl
reinstating missing or loose tie rods at end
bays of arches (at extra cost); removing
existing tar felt and other damaged
waterproofing systems; replacing soft or
damaged lime terrace, if at isolated locations,
with cement concrete (1:2:4); sealing cracks
on the roof surface with sealing compound of
acrylic-styrene copolymer having density of
0.9, pH 7.0 to 8.0 and having excellent bond &
waterproofing properties and a minimum
expandability of at least 200%; providing a 10
mm thick cement-sand (1:4) plaster on the
entire surface; curing for 7 days;
waterproofing the surface with a two-layer
plaster; the first layer shall be 5 mm thick
with cement (OPC or slag), admixed with an
octadecanoic acid based cementitious
waterproofing compound in the weight ratio of
50:3 for cement and waterproofing
compound; and second layer of 12 mm thick
cement-sand (1:4) plaster, enriched with
polyester fibre and curing the plastered
surface. (polyester fibre to be paid under
separate item)
109020 Surface protection of jack arch roofs with Sqm 328.86 as at site
polymer incl. reinstating missing or loose tie
rods at end bays of arches (at extra cost);
removing existing tar felt and other damaged
waterproofing systems; replacing soft or
damaged lime terrace, if at isolated locations,
with cement concrete (1:2:4); sealing cracks
on the roof surface with a sealing compound
of acrylic-styrene copolymer; waterproofing
the surface with three coats of the acrylic-
styrene copolymer, admixed with an
3:1 to build up a thickness of about 1.0 mm;
spreading dry coarse sand on the third coat
when wet; finally providing a 6 mm thick
cement-sand (1:4) plaster enriched with
polyester fibre and curing (polyester fibre to
be paid under separate item)

Cement
Qty.(qtl.)
109030 Arresting water leakages at isolated locations
(points of leakage), at cracks and at
construction joints with a putty of cement
(OPC or slag), modified with a cementitious
quick setting compound in a weight ratio of
1:10 (1 part compound : 10 parts cement)
and modified with a silica waterproofing
compound - Contd. ...
Contd. .. having the properties of making
cement quick setting and non-shrinking in
quantities to suit the water pressure
conditions at the site and finally topping the
plugged material with a surface waterproofing
treatment (to be paid separately)
109031 For Leakage points Each 407.70
109032 For Construction joints metre 554.34
109040 Water proofing Surface treatment inside walls
and floors of water reservoirs, swimming
pools, sunken slabs/toilet floors and inside of
basements, etc by cleaning the surface;
preparing the surface by acid etching; treating
the surface with a two layer plaster; the first
layer shall be 7/6 mm thick with octadecanoic
acid based cementitious waterproofing
compound and cement in the weight ratio of
3:50 for waterproofing compound and cement;
cement-sand (1:2 on floors of basements and
tunnels, 1:3 elsewhere) plaster (12 mm thick
on floor, 8 mm thick on vertical surfaces and
at ceiling) and curing the plastered surface
109041 Inside Tunnel Surface Sqm 354.06 as at site
109042 Inside Water Reservoir Sqm 356.41 as at site
109050 Water proofing of roofs and exposed concrete Sqm 286.15 as at site
surfaces by cleaning and preparing the
surfaces by acid etching; treating it with a two-
layer plaster; the first layer 5 mm thick with
cement (OPC or slag), admixed with an
50:3 for cement and waterproofing compound;
finally providing a 12 mm thick cement-sand
(1:4) plaster, enriched with polyester fibre,
and curing the plastered surface; the
treatment shall be impermeable under a
waterhead of 20.0 metres. (polyester
triangular fibre and removal of existing
damaged waterproofing system, PCC, Lime
Terracing etc., if any, to be paid extra under
separate item)

Cement
Qty.(qtl.)
109060 Water proofing of roofs and exposed concrete Sqm 238.40 as at site
surfaces using polymeric waterproofing
compound by cleaning and drying the surface;
applying two coats (DFT of 200-300 micron) of
translucent brown coloured phenolic resin
based single component high performance
polymeric waterproofing compound @ 0.6 litre
per square metre, with demonstrable
properties of resistance to water and acid; ..
Contd. -
.. Contd. .. spraying a layer of dry coarse sand
on the second coat when still wet; removing
excess sand on the following day; permitting
the coatings to cure and dry naturally for 3-7
days; providing a 12 mm thick cement-sand
(1:4) cover plaster; curing the plaster; the
treatment shall be impermeable under a
waterhead of 20m (removal of existing
damaged waterproofing system, PCC, Lime
Terracing etc., if any, to be paid extra under
separate item)
109070 Making Drain mouth on roof waterproof by Each 404.91
cleaning the surface of the structure at the
location of drain mouth; lowering the drain
mouth to the level of the concrete roof;
chipping; thorough cleaning; mixing
thoroughly an octadecanoic acid based
cementitious waterproofing compound in the
weight ratio of 50 cement (OPC or slag) and 3
waterproofing compound; placing the drain
mouth in its final position, followed by filling
of the annular space around the drain pipe
with a paste of waterproofing compound-
cement; sealing the edges of the drain mouth
with acrylic-styrene based copolymer
waterproofing compound
109080 Sealing of cracks in concrete roofs by making metre 159.30
a V-shaped groove 8-10 mm wide and 3-5 mm
deep; filling the groove with acrylic-styrene
based copolymer waterproofing compound in
water by repeated application of the
waterproofing compound; spreading dry
coarse sand when the last application of the
sealing compound still wet; removing the
excess sand on the following day and letting
the treatment dry up for at least a day before
any surface treatment on the roof

Cement
Qty.(qtl.)
109090 Treatment of expansion joints by cleaning the metre 868.54
joint and surfaces abutting the expansion
joint, applying two coats of primer on the
cleaned surfaces at the opening of the joint,
filling the joint (to a depth equaling half the
width) with the paste of a two-component
polysulphide based sealant (with base-curing
agent weight ratio of 12.33:1 and a sp. gr. of
1.600.10 gms/cc, permitting the sealant to
cure in natural air for at least a day, providing
the edges of the treatment with two coats of a
paste of octadecanoic acid based cementitious
waterproofing compound and acrylic-styrene
based copolymer waterproofing material in the
weight ration of 1:3
109100 Supply and Installation, including lifting to all Sqm 579.02
heights as required, galvanized steel
corrugated sheets having cover width of 1000
mm, 35 mm crest at a pitch of 250 mm
stiffened with 8 mm deep intermittent
corrugations or profiling approved by engineer-
in-charge. G.I. sheet should be made from
base metal having 0.52 mm (± 0.02 mm)
thickness in steel of grade S250GD as per EN
10326, duly hot dip galvanized to grade 275
as per IS:277 (minimum zinc mass 275 gsm
total both sides), with colour coating having
complete dip tank pre-treatment process with
zinc phosphate as main pre treatment followed
by PU primer (Permaprime grade) of min 5
micron DFT on each surface; finished with
special polyester paint to grade EPG-20 of
minimum 20 micron DFT on exposed surface
and 5 micron DFT polyester paint in grey
shade on unexposed surface. Fixing shall be
done with self-tapping screws meeting
requirement of Class-3 of AS 3566with EPDM
washers at suitable intervals as per site
requirement and as directed by Engineer
Incharge complete work.

Cement
Qty.(qtl.)
109110 Providing and fixing at all heights false ceiling Sqm 637.08
of 9mm thick VENEERED BAMBOO PARTICLE
BOARD – Both Side Commercial Veneer SOGP
GRADE II (595mm X 595mm) conforming to
IS : 3097 – 1980 including providing and
fixing of framework made of GI angle
25mmX25mmx0.4mm thick all around,
suitably fixed to wall with the help of dash
fastener and hanger frame (600mm x 600mm
c/c) made of GI Slotted Tee having powder
coating on bottom side (30mm X 25mm X
0.3mm thick for main member & 25mm X
25mm X 0.3mm for cross member) connected
to ceiling with 2.64mm GI wire and anchor
fastener at every junction and also including
the cost of making openings for light fittings,
grills, diffusers, cutouts made with frame of
perimeter channels suitably fixed all complete
as specification and direction of the Engineer-
in-charge as a complete job
109120 Providing and fixing at all heights false ceiling Sqm 1164.69
of 4mm thick phenol bonded Bamboo Mat
board (595mm X 595mm) conforming to IS :
13958-1994 including providing and fixing of
frame work made of GI angle 25mm x 25mm
x 0.4 mm thick all around suitably fixed to
wall with the help of dash fastener and hanger
frame (600mm x 600mm c/c) made GI
Slotted Tee having powder coating on bottom
side (30mm x 25mm x 0.3mm thick for main
member & 25mm x 25mm x 0.3mm for cross
member) connected to ceiling with 2.64mm GI
wire and anchor fastener at every junction and
also including the cost of making openings for
light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably
fixed all complete as per specifications and
direction of Engineer-in-charge as a complete
109130 job
Providing, erecting, laying and fixing in Sqm 1681.41
position in 3.5 – 4mm thick bamboo mat
corrugated sheet (BMCS) as per IS : 15476 –
2004 in roofing with galvanized iron J or L
hooks 8mm dia G.I. plain and bitumen washer
etc. complete. Rates include cost of all L&M
with all charges such as octroi, sales tax,
loading, unloading, stacking as a complete job

Cement
Qty.(qtl.)
109131 Providing and fixing in position ridges of 3.5 - metre 1114.08 0.000
4mm thick bamboo mat ridge cap (BMRC) with
galvanized iron J or L hooks 8 mm dia G.I.
plain and bitumen washer etc. complete. The
rates include the cost of all L&M with all
charges such as octroi, sales tax, loading,
unloading, stacking as a complete job.
Nothing will be paid extra whatsoever the case
may be
109140 Supplying, fabricating and erecting in position Sqm 1086.96 as at site
0.91 mm thick industrial corrugated
aluminium sheets (Profile tolerance
conforming to IS 254-1975, made of 988 alloy
conforming to IS 737-1974) in full hard (H4)
tamper, in roof/sides including cuttings of
sheet for proper lapping and length and
supplying, fabricating and fixing wind ties of
MS flat 25mmX6mm on every joint of roof
sheeting and on ends of sheeting, supplying of
necessary GI "J" or L-Hook bolts (8 mm dia &
in suitable length) with nuts and GI washer
alongwith standard fibre washers etc.
complete in all respect to make the entire
roofing/side wall ends watertight and leak
proof. The rate will be inclusive of supply of
material, labour tools plants and equipments,
scaffolding, staging etc. complete.
109150 Supplying, fabricating and erecting valley metre 922.22
gutter having 1.00 meter width, made out of
0.91mm thick aluminum sheets, the joints
shall be made by aluminum welding to make
water tight including supplying manufacturing
and fixing brackets made out of MS flats
50mm x 6mm at the spacing of 75 cm center
to center. The rate will be including supply of
all materials, labours, tools, plants,
equipments, scaffolding and staging etc.
Complete work shall be carried out as directed
by engineer in charge
109160 Providing, erecting, laying and fixing in Sqm 1140.26
position for roofing 2.5mm thick Bamboo -
Jute (Natural Fibre) thermoset composite ISO
9001-2000 certified factory-made semi-
corrugated sheets having Eco-friendly, Bio-
degradable, Maintenance free, Fire Retardant,
Weather (+100 °C to -30 °C), Water
(absorption 3% max) & Termite Proof and
U.V., Alkali & diluted Acid (5%) resistance
character of Size 2440 ± 10mm in length and
1220 ± 10mm in width fixed to purlins with GI
‘J’ or ‘L’ hooks 8 mm dia, GI plain and bitumen
washers etc. complete

Cement
Qty.(qtl.)
109161 Supply and fixing of ISO 9001-2000 certified metre 894.45
factory made Bamboo - Jute Composite Ridges
for semi-corrugated roofing sheets having Eco-
friendly, Bio-degradable, Maintenance free,
Fire Retardant, Weather (+100 °C to -30 °C),
Water (absorption 3% max) & Termite Proof
and U.V., Alkali & diluted Acid (5%) resistance
character of size 1220 ± 10mm in length,
300mm to 350mm in width and 2.5mm thick,
complete with all fittings
109170 Providing and fixing Aluminium standing Sqm 5038.05
insulated seam roofing system consisting of
bottom layer of 0.47mm thick 35/200 profile
galvanised steel liner sheet having 35mm
deep ribs with Galvanising of 2M275 coating.
A 20mm wide galvanised steel top hat with
brackets laid at 1m interval across bottom
layer
A single layer of double sided aluminium
foil/polyethylene film heavy duty provided
over bottom layer for vapour absorption. A
single layer of glass wool thermal insulation of
80 mm thickness compressed to 70mm having
minimum density of 24 kg/cum, to be placed
over Aluminium foil
ST clips made of stainless steel duly insulated
to be placed at suitable interval all over top
hat fixed with nut and bolts or rivetted. Top
layer made of Aluminium profile sheet in
65/400mm profile sheeting made of
Aluminium alloy having 0.9mm minimum
thickness duly covered with PVDF coating on
both faces having tongue and groove fixing
arrangement. Work to be carried out as per
specifications laid in IR Unified Standard
Specifications
109180 Providing and fixing of single skin self Sqm 3760.91
supported secret fix aluminium standing seam
roofing system consisting of aluminium profile
sheet in 65/400 mm manufactured from
aluminum alloy AA3004 and having 0.9 mm
minimum thickness with PVDF coating on
exposed surface (colour as approved by
Engineer Incharge) having male and female
fixing arrangements, to be zipped together
and non-penetrative including fixing of L-25
ST clips with thermal insulation pad at suitable
interval all over the top-hat/purlin fixed with
SD screws and stainless steel fasteners

Cement
Qty.(qtl.)
109190 Providing and fixing PVC false ceiling tiles of Sqm 1061.57
required size in true horizontal levels
suspended on interlocking MS tube grid of
section 25mmx25mmx1.2mm. PVC ceiling
tiles should have a section size of
6mmx250mm with wall thickness of 0.8mm.
Perimeter edge of tiles shall be covered by
extruded PVC corner beeding of size 9mm x
8mm x1 mm. MS tube section grid should be
properly secured with walls and anchored to
roof with the help of suitable clamps with
109200 complete
Providing workand fixing permanently colour Sqm 660.47
coated trapezoidal profiled sheet of depth 28-
30mm at 195-205mm pitch distance with
precisely engineered “Rib & Flute” design.
Profiled sheets shall be min. 0.5mm
TCT/0.45mm BMT high tensile zinc aluminium
alloy coated zincalume / galvalume steel sheet
(550 mpa yield strength) having a coating of
mass of 150 gsm zinc-aluminium coating AZ-
150 total on both sides as per, AS 1397:1993
finished with 20 microns approved colour
coating of Silicon Modified Polyester (SMP) /
Super Polyester paint coat on exposed surface
.. Contd.
Contd. -
..over a primer coat of 5 microns and
a back coat of 5 microns on reverse side over
a 5 microns primer coat. There shall be 2
small ribs/square flutes between profiles for
providing additional strength. The sheet to be
fixed over the purlins with hexagonal head self
drilling suitable fasteners with neoprene /
EPDM washer on crests of the sheet
109210 Providing and fixing 0.55mm TCT Standing Sqm 774.42
Seam/clip-lock Profile for roofing comprising
Zincalume / Galvalume base steel of metal
thickness 0.5mm and coated with Zinc-
Aluminium coating of AZ-150 (150 gsm) as
per AS : 1397-1993 (total of both sides) and
permanently colour coated with 20 microns
Super Polyester / SMP Colour Coating over a 5
micron primer and back coat of 5 micron over
a 5 micron primer. Standing Seam sheets to
be profiled to desired length & width of
400mm to 770mm, having profile depth of
31mm to 61 mm with a unique concealed clip
made from GI, one portion of the clip (lower)
fastened to purlin and upper part gets
attached to roofing sheet. Thereby providing
an absolutely puncture-less roof wih concealed
clip crimped / locked together by a mechanical
sewing machine

Cement
Qty.(qtl.)
109220 Providing and applying water proofing Sqm 705.65 0.020
treatment to RCC roof slab etc. by application
of two coats of cement slurry mixed with
water proofing compound (Acrylic based
polymer, solid content 30% ±3, pH >7) in the
ratio of 1:2 (1 part of water proofing
compound : 2 parts of cement by weight),
followed by two coats of single component
moisture cured polyurethane based
elastomeric water proofing coating conforming
to ASTM C-836-89 having tensile strength 3.1
N/mm². Topping layer of 25 mm thick cement
concrete 1:2:4 (to be paid separately) to be
laid
109230 Supply and Installation, including lifting to all Sqm 607.63
heights as required, trapezoidal/corrugated
sheeting system in galvalume colour coated
steel having cover width of 1000 mm, 35 mm
crest at a pitch of 250 mm stiffened with 8
mm deep intermittent corrugations or profiling
approved by engineer-in-charge. Sheet should
be made from base metal having 0.52 mm (±
0.02 mm) thickness in steel of grade 345 as
per ASTM A792M, .. Contd. -
.. Contd. - coated with alloy of Aluminum &
Zinc to grade AZ150 (min. alloy mass 150
gsm total both sides) with colour coating
having complete dip tank pre-treatment
process with Chromate Conversion (Cr +3) as
main pre-treatment followed by PU primer
(Permaprime grade) of min. 5 micron DFT on
each surface; finished with special polyester
paint to grade EPG-20 of minimum 20 micron
DFT on exposed surface and 5 micron in grey
shade on unexposed surface. Fixing shall be
done with self-tapping screws meeting
requirement of Class-3 of AS 3566 with EPDM
washers at suitable intervals as per site
requirement and as directed by Engineer
Incharge complete work

Cement
Qty.(qtl.)
109240 Supplying and installation including lifting to Sqm 3588.72
all heights as required, of standing seam
system 0.7 mm thick aluminum sheets having
cover width of 550 mm, 46 mm crest height
with horizontal stiffening ribs, made of
Aluminum Manganese alloy 5754 grade in mill
finish. The sheets shall have side locking with
special anti-friction, anti-static, polyamide /
acetylate brackets which allow thermal
movement to the sheets. Clips shall be fixed
to purlins/structure with zinc coated self-
tapping drilling screws. Sheets shall be site
roll formed for giving required profile and
length. Complete job to be done as per
109250 directions of Engineer
Providing and fixing ofIncharge
plain formed flashing at
ridges / cover / corner / barge pieces / apex
junctions of roofing and cladding made of
polyester colour GI sheets 0.52 mm thick in
required shape colour, duly fixed with
stitching screws (with EPDM washers etc. as
per site requirement
109251 Upto 600 mm width (girth) R metre 390.85
109252 601mm to 1200 mm width (girth) R metre 525.00
109260 Providing & fixing of coloured galvalume plain
sheet flashings at ridges / apex junctions of
roofing cladding, cover / corner / barge pieces
etc. in required shape, colour duly fixed with
stitching screws (with EPDM washers etc. as
per site requirement)
109270 Providing and fixing of plain formed 0.7 mm
thick aluminum sheet flashing at ridges apex
junctions of roofing and cladding, cover /
corner / barge pieces etc. of required shape
colour and profile as per site requirement
109280 Supplying and installation including lifting to Sqm 523.30
all heights as required, of 0.5 mm thick
trapezoidal aluminum sheets having cover
width of 975 mm, 32 mm crest height, pitch of
195mm made of Aluminum Manganese alloy
5754 grade in mill finish. Fixing shall be done
with self tapping, self drilling screws of
required TPI (24 or 14 or as thickness of
purlin) and length, with neutral EPDM washer
etc. complete

Cement
Qty.(qtl.)
109290 Providing and fixing of plain formed 0.5 mm
thick aluminum sheet flashing at ridges apex
junctions of roofing and cladding, cover /
corner / barge pieces etc. of required shape
colour and profile as per site requirement
109300 Extra over item no. 109280, if Stucco Sqm 58.08
embossed finished aluminium sheets are used
instead of mill-finish sheets
109310 Extra over item nos. 109240 & 109280, for Sqm 464.60
Aluminium sheets with 5 micron DFT primer
on both faces alongwith 20 micron & 5 micron
DFT Polyester colour coating on exposed &
unexposed surfaces respectively, instead of
mill finish
109410
109420
109430
109440
109450

IR's Unified Standard Schedule Of Rates 2010 Chapter-11 : Finishing Masonary
CHAPTER - 11 : FINISHING MASONARY
Cement
Qty.(qtl.)
Note : Rates for external plaster are for height upto
10m from ground level, unless otherwise stated.
CEMENT PLASTER (IN FINE SAND) :

111010 12 mm cement plaster of mix -
111011 1:4 (1cement: 4 fine sand) Sqm 55.63 0.055
111012 1:6 (1cement: 6fine sand) Sqm 55.63 0.036
111020 15 mm cement plaster on the rough side of single or
half brick wall of mix -
111041 1:4 (1cement: 4coarse sand) Sqm 56.52 0.055
111050 15 mm cement plaster on the rough side of single or
half brick wall of mix -
111060 20 mm cement plaster of mix
111070 12 mm cement plaster finished with a floating coat
of neat cement of mix -
111080 15mm cement plaster on rough side of single or half
brick wall finished a floating coat of neat cement of
mix -
111090 12 mm cement plaster 1:3 (1cement: 3coarse sand) Sqm 68.28 0.095
finished with a floating coat of neat cement
111100 15 mm cement plaster 1:3 (1cement: 3coarse sand) Sqm 76.64 0.110
finished with a floating coat of neat cement on the
rough side of single or half brick wall
CEMENT PLASTER IN TWO COATS :
111110 18 mm cement plaster in two coats under layer Sqm 84.88 0.063
12mm thick cement plaster 1:5 (1cement: 5coarse
sand) finished with a top layer 6mm thick cement
plaster 1:6 (1cement: 6fine sand)

Cement
Qty.(qtl.)
111120 18 mm cement plaster in two coats under layer Sqm 84.88 0.081
12mm thick cement plaster 1:5 (1cement: 5coarse
sand) and a top layer 6mm thick cement plaster 1:3
(1cement: 3coarse sand) finished rough with
sponge/rubber pad
111130 12 mm cement plaster 1:2 (1cement: 2stone dust) Sqm 62.82 0.098
111140 15 mm cement plaster 1:2 (1cement: 2stone dust) Sqm 72.41 0.117
on the rough side of single or half brick wall
111150 Cement plaster to ceiling of mix -
111151 6 mm thick 1:3 (1cement: 3 fine sand) Sqm 49.30 0.037
111152 12 mm thick 1:3 (1cement: 3 fine sand) Sqm 58.89 0.073
111160 6 mm cement plaster 1:3 to CC/RCC in columns, Sqm 50.40 0.037
beams, stairs etc when specifically ordered except
underside of ceiling
111170 6 mm cement plaster 1:3 (1cement: 3fine sand) Sqm 65.20 0.059
finished with a floating coat of neat cement and
thick coat of lime wash on top of walls when dry for
bearing of R.C.C. slabs and beams
111180 Neat cement punning Sqm 11.76 0.022
SPECIAL TYPES PLASTER
112010 12 mm cement lime plaster of mix: : (For repair
works only)
112011 1:1:6 (1cement: 1lime putty: 6 fine sand) Sqm 71.35 0.036
112020 15 mm cement lime plaster on rough side of single
or half brick wall of mix. (For repair works only)
112040 Providing and applying plaster of Paris putty of 2mm Sqm 66.58
average thickness over plastered surface to prepare
the surface even and smooth complete
112050 Providing and applying 12mm thick (average) Sqm 285.76
premixed formulated one coat gypsum lightweight
plaster having additives and light weight aggregates
as vermiculite/perlite respectively conforming to
IS:2547 (Part-1 & II) 1976, applied on
hacked/uneven background such as bare
brick/block/RCC work on walls & ceiling at all floors
and locations, finished in smooth line and level etc.
complete
112060 Rough cast plaster upto 10m height above ground Sqm 155.58 0.116
level with a mixture of sand and gravel or crushed
stone from 6mm to 10mm nominal size dashed over
and including the fresh plaster in two layers, under
layer 12mm ordinary cement plaster 1:4 (1cement:
4coarse sand) and top layer 10mm cement plaster

Cement
Qty.(qtl.)
112070 Pebble dash plaster upto 10m height above ground Sqm 145.07 0.116
level with a mixture of washed pebble or crushed
stone 6mm to 12.5mm nominal size) dashed over
and including fresh plaster in two layers under layer
12mm cement plaster 1:4 (1cement: 4coarse sand)
and top layer 10mm cement plaster with cement
112080 Washed stone grit plaster on exterior walls of height Sqm 208.50 0.164
upto 10m above level in two layers, under layer
12mm cement plaster 1:4 (1cement: 4coarse sand)
furrowing the under layer with scratching tool,
applying cement slurry on the under layer @ 2kg. of
cement per square meter, top layer 15mm cement
plaster 1:1.2:2 (1cement:1.2coarse sand: 2stone
chipping 10mm nominal size) in panels with groove
all around as per approved pattern including
scrubbing and washing, the top layer with brushes
and water to expose the stone chippings, complete
as per specification and direction of the Engineer-in-
Charge (payment for providing grooves shall be
made separately)
112090 Extra for washed stone grit plaster on exterior walls Sqm 19.77
of height more than 10m from ground level for every
additional height of 3m or part thereof
112100 Extra for washed stone grit plaster on circular work Sqm 28.30
not exceeding 6m in radius (in two coats)
112110 Extra for using white cement in place of ordinary Sqm 136.48
cement in the top layer of the item of washed stone
grit plaster
112120 18mm plastering upto 10m height above ground Sqm 401.50 0.129
level with terrazzo finish rubbed and polished
complete, under layer 12mm thick cement plaster
1:3 (1cement: 3coarse sand) and top layer 6mm
thick white, black, chocolate, grey, yellow or baroda
green marble chips of 3mm and down size laid in
cement marble powder mix 3:1 (3cement: 1marble
powder) by weight in proportion of 4:7 (4cement
marble powder mix: 7marble chips) by volume
112130 Extra if white cement is used instead of ordinary Sqm 69.60 0.000
cement in top layer of 18mm thick plastering with
terrazzo finish
112140 Extra if colour is added to grey or white cement in
top layer of 18mm plastering with terrazzo finish
112141 Red, Chocolate, Orange or buff (yellow) colour Sqm 25.51
112142 Black colour Sqm 16.49
112143 Blue or green colour Sqm 17.65
112150 Extra for 18mm thick terrazzo finish marble chips Sqm 14.98
plastering circular work not exceeding 6metre radius
PLAIN CEMENT MORTAR BANDS :
113010 12mm thick cement mortar bands in cement mortar

Cement
Qty.(qtl.)
113011 Flush Band plain m long x 1.28 0.001
cm wide
113012 Sunk Band plain m long x 1.40 0.001
cm wide
113013 Raised Band plain m long x 1.61 0.001
cm wide
113014 Moulded Band m long x 2.80 0.001
cm wide
113020 18mm thick cement mortar band incl. cement
mortar 1:4 (1cement: 4fine sand) -
113021 Flush Band plain m long x 1.54 0.001
cm wide
113022 Sunk Band plain m long x 1.71 0.001
cm wide
113023 Raised Band plain m long x 1.97 0.001
cm wide
113024 Moulded Band m long x 3.71 0.001
cm wide
113030 18 mm thick moulded cement mortar band in two m long x 3.72 0.001
coats under layer 12mm thick with cement mortar cm wide
1:5 (1cement: 5coarse sand) top layer 6mm thick
with cement mortar 1:4 (1cement: 4fine sand)
POINTING
114010 Pointing on brick work with cement mortar

1:3(1cement: 3fine sand)
114011 Flush/Ruled/Struck or weathered pointing Sqm 43.64 0.015
114012 Raised and cut pointing Sqm 71.50 0.020
114020 Pointing on brick/tile flooring with cement mortar
114021 Flush pointing Sqm 35.50 0.015
114022 Ruled pointing Sqm 42.83 0.015
114030 Flush/ Ruled/ Struck or Weathered Pointing on tile Sqm 58.75 0.015
brick work with cement mortar 1:3 (1cement: 3fine
sand)
114040 Pointing on stone work with cement mortar 1:3
(1cement: 3fine sand)
114041 Flush/ Ruled pointing Sqm 66.61 0.024
114042 Raised and cut pointing Sqm 121.34 0.024
114050 Raised and cut pointing on stone work in white Sqm 152.19 0.024
cement mortar 1:3 (1white cement: 3marble dust)
114060 Deep grooved pointing on Coarse Rubble masonry Sqm 106.16 0.024
1:3
114070 Flush Pointing on stone slab flooring with cement Sqm 28.60 0.007
114080 Flush Pointing on dry stone pitching in cement and Sqm 18.26 0.012
sand (ordinary) 1:3
114090 Flush pointing to joints of Mangalore tiled roof 12 Sqm 67.19 0.015
mm. deep with cement mortar 1:2
114100 Pointing on stone slab ceiling with cement mortar
114101 Flush pointing Sqm 36.59 0.007

Cement
Qty.(qtl.)
114102 Ruled pointing Sqm 41.00 0.007
114110 Extra for pointing on walls on the outside at height Sqm 3.11
more than 10m from ground level for every
additional height of 3m or part thereof
WHITE WASHING, COLOUR WASHING
DISTEMPERING AND PAINTING
115010 White washing with lime to give an even shade
115011 New work (three or more coats) Sqm 9.16
115012 Extra for using zinc oxide 75 gm per kg of lime for Sqm 3.99
final coat of white washing
115020 Lime wash on walls one coat with quick lime of Sqm 3.58
approved quality
115030 Colour washing such as green, blue or buff to give
an even shade
115031 New work (two or more coats) with a base coat of Sqm 11.14
white washing with lime
115032 New work (two or more coats) with a base coat of Sqm 11.26
whiting
115040 Distempering with oil bound washable distemper of
approved brand and manufacture to give an even
shade
115041 New work (two or more coats of distemper) over and Sqm 53.96
including priming coat with cement primer
115042 New work (two or more coats of distemper) over and Sqm 54.17
including priming coat with distemper primer
115050 Distempering two or more coats on new work with Sqm 31.90
1st quality acrylic washable distemper (ready mixed)
of approved manufacturer and of required shade and
colour complete as per manufacturer’s specification
115060 Applying one coat of cement primer of approved Sqm 21.89

brand and manufacture on wall surface
115070 Extra over Item 115040,115050 in case primer is Sqm 0.25
applied on gritted/ rough cast/ sand faced or alike
rough surfaces
115080 Finishing walls with Deluxe Multi surface paint Sqm 71.80
system for interiors and exteriors using Primer as
per manufacturers specifications with two or more
coats applied @ 1.25ltr/10 sqm over and including
one coat of Special primer applied @ 0.75 ltr/10sqm
115090 Wall painting on new work with two or more coats of Sqm 49.03
plastic emulsion paint of approved brand and
manufacture to give an even shade
115091 Extra over Items for roller painting in lieu of normal Sqm 9.28
brush painting if specifically ordered
115092 Extra over Items for spray painting in lieu of normal Sqm 11.99
brush painting if specifically ordered
115100 Painting one thin coat with white lead of approved Sqm 27.38
brand and manufacture on wet or patchy portion of
plastered surfaces

Cement
Qty.(qtl.)
115110 Finishing walls with water proofing cement paint of Sqm 36.35
required shade two or more coats on new work
applied @ 3.84 Kg/10 sqm

Cement
Qty.(qtl.)
115120 Cement washing single coat.(Ordinary Portland Sqm 3.73 0.002
cement)
115130 Cement washing two coat.(Ordinary Portland Sqm 5.63 0.004
cement)
115140 Finishing walls with textured exterior paint of Sqm 115.66
required shade on new work (Two or more coats
applied @ 3.28 ltr/10 sqm) over and including base
coat of water proofing cement paint applied @ 2.20
kg/10sqm
115150 Finishing walls with textured Interior paint of Sqm 74.40
applied @ 3.28 ltr/10 sqm) over and including base
kg/10sqm
115160 Finishing walls with Acrylic Smooth exterior paint Sqm 64.07
with Silicone additives of required shade on new
work (Two or more coats applied @ 1.67ltr/10 sqm
over and including one coat of water proofing
cement paint applied @ 2.20 kg/10sqm
115170 Finishing walls with Acrylic Smooth Interior paint of Sqm 74.90
applied @ 1.67 ltr/10 sqm over and including base
kg/10sqm
115180 Finishing walls with Premium Acrylic Smooth Sqm 72.06
exterior paint with Silicone additives of required
shade on new work (Two or more coats applied @
1.43ltr/10 sqm over and including one coat of water
proofing cement paint applied @ 2.20 kg/10sqm
115190 Finishing walls with Premium Acrylic Smooth Interior Sqm 75.59
paint with Silicone additives of required shade on
new work (Two or more coats applied @ 1.43ltr/10
sqm over and including one coat of water proofing
cement paint applied @ 2.20 kg/10sqm
115200 Extra for applying water proofing cement paint as Sqm 2.93
primer applied @ 2.2kg/10 sqm instead of primer for
exterior finishing
MISCELLANEOUS
116010 Cement plaster 1:3, 12 mm thick (1Cement :3 metre 67.24 0.077
ordinary sand) on girders/ RCC columns or other
parts encased with rabbit wire netting or expanded
metal. (Note : the payment for encasing to be done
separately)
116020 Rounding top of walls, 20/23 cm thick wall, with metre 45.96 0.033
cement mortar 1 : 6 finish, with hearting of brick
masonry.(Ht at centre=10/11.5 cms)
116030 Rounding top of walls, 30/35 cm thick wall, with metre 77.53 0.099
cement mortar 1: 6 finish, with hearting of 1: 3: 6
cement concrete. (Ht at centre =15/17.5 cms)

Cement
Qty.(qtl.)
116040 Fixing sharp glass pieces in cement mortar 1:4, 25 Sqm 86.04 0.106
mm, thick, on the top of brick masonry or stone
masonry compound walls (Glass pieces to be
supplied by the contractor)

Cement
Qty.(qtl.)
116050 Fixing Railway's glass pieces on compound wall Sqm 52.13 0.106
including cement plastering 20mm thick in cement
mortar 1:4 (1 cement : 4 sand)
116060 Raggling masonry or concrete surface including
watering and cleaning
116061 Masonry or concrete built in cement mortar Sqm 13.23
116062 Masonry or concrete built in lime mortar Sqm 12.28
116070 Finishing with Epoxy paint (two or more coats) at all Sqm 91.66
locations prepared and applied as per
manufacturer's specifications including appropriate
priming coat, preparation of surface, etc. complete
on concrete work
116080 Floor painting on new work with two or more coats Sqm 50.60
of floor enamel paint of approved brand and
manufacture to give an even shade :
116090 Floor polishing on masonry or concrete floors with Sqm 20.41
wax polish of approved brand and manufacture
116100 Extra for providing and mixing water proofing 100 ml 14.04
compound (pH>7, Sp.Gravity 1.06±0.02,
conforming to IS:2645) in cement plaster @ 100ml
per 50 kg cement bag
116110 Extra for plastering exterior walls of height more Sqm 18.79
than 10 m from ground level for every additional
height of 3m or part thereof
116120 Extra for plastering on circular work not exceeding
6m in radius
116121 In one coat Sqm 8.84
116122 In two coats Sqm 13.58
116130 Extra for plastering done on moulding cornices or
architraves including neat finish to line and level
116131 In one coat. Sqm 129.97
116132 In two coats. Sqm 213.36
116140 Extra for plastering on
116141 Spherical ceiling. Sqm 34.29
116142 Groined ceiling. (Gritted) Sqm 37.41
116143 Flowing soffits.(spiral) Sqm 22.46
116150 Extra for lining out plaster to imitate stone or Sqm 21.12
concrete blocks walling.
116160 Extra for forming groove of uniform size from Sqm 24.24
12x12mm and upto 25x15mm in plastered surface
as per approved pattern using wooden battens,
nailed to the under layer including removal of
wooden battens, repairs to the edges of plaster
panel and finishing the groove complete as per
specifications and the direction of the Engineer-in-
Charge
White/Colour washing/Pointing on Old work

117010 Pointing on brick work with lime surkhi mortar 1:2
(1lime putty: 2surkhi). (On Old Work)

Cement
Qty.(qtl.)
117011 Flush pointing Sqm 58.06

Cement
Qty.(qtl.)
117012 Ruled pointing Sqm 58.72
117013 Struck or weathered pointing Sqm 58.61
117020 Pointing on brick work with an admixture of white
cement lime putty marble dust and stone dust in
proportion ¼:1:1:1 (¼white cement: 1lime putty:
1marble dust: 1stone dust). (On Old Work)
117030 Pointing on tile brick work with lime mortar 1:2
(1lime putty: 2surkhi). (On Old Work)
117040 Pointing on tile brick work with an admixture of
white cement lime marble dust and stone dust in
1marble dust: 1stone dust). (On Old Work)
117050 White washing with lime to give an even shade
117051 Old work (two or more coats) Sqm 7.18
117052 Old work (one or more coats) Sqm 5.26
117060 White washing with whiting to give an even shade
117061 Old work (two or more coats) Sqm 6.90
117070 Colour washing such as green, blue or buff to give
an even shade
117071 Old work (two or more coats) with lime Sqm 7.29
117072 Old work (two or more coats) with whiting Sqm 7.01
117073 Old work (one or more coats) with lime Sqm 5.33
117074 Old work (one or more coats) with whiting Sqm 5.14
117080 Oil bound distemper after removing old white/ colour
wash by scrapping and sand papering etc., preparing
the surface smooth including necessary repairs to
scratches with putty etc complete
117081 Two or more coat, to give an even shade Sqm 50.72
117082 One or more coat, to give an even shade Sqm 40.65
117090 Plastic emulsion paint after removing white/colour
wash by scrapping and sand papering etc., preparing
the surface smooth including necessary repairs to
scratches with putty etc complete
117091 Two or more coat, to give an even shade Sqm 71.30
117092 One or more coat, to give an even shade Sqm 53.50

Cement
Qty.(qtl.)
118010

Cement
Qty.(qtl.)
118020
118030
118040
118050
118060
118070
118080
118090
118100

IR's Unified Standard Schedule Of Rates 2010 Chapter-12 : Painting, Polishing Varnishing
CHAPTER - 12 : PAINTING, POLISHING & VARNISHING
PAINTING – SURFACES OTHER THAN MASONRY

121010 Applying Priming Coat :
121011 With ready mixed pink or grey primer of approved brand and Sqm 19.54
manufacture on woodwork (hard and soft wood)
121012 With ready mixed aluminium primer of approved brand and Sqm 19.35
manufacture on resinous wood and plywood
121013 With ready mixed red oxide zinc chromate primer of Sqm 16.07
approved brand and manufacture on steel galvanized
121014 iron/steel
With ready works
mixed red oxide zinc chromate primer of Sqm 9.15
approved brand and manufacture on steel work (second coat)
121020 Painting wood work with Deluxe Multi Surfaces Paint of Sqm 59.89
required shade. Two or more coat applied @ 0.90ltr/ 10sqm
over an under coat of primer, applied @ 0.75ltr/ 10sqm of
approved brand or manufacture
121030 Painting Steel work with Deluxe Multi Surface Paint to give an Sqm 62.48
even shade. Two or more coats applied @ 0.90ltr/ 10sqm
over an under coat of primer applied @ 0.80ltr/ 10sqm of
approved brand or manufacture
121040 Finishing with Epoxy paint (two or more coats) at all
locations prepared and applied as per manufacturer’s
specifications including appropriate priming coat, preparation
of surface etc. complete
121041 On steel work Sqm 93.25
121050 Painting with synthetic enamel paint of approved brand and
121051 Two or more coats on new work Sqm 43.87
121052 One or more coats on old work Sqm 28.23
121060 Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade
121061 Two or more coats on new work over an under coat of Sqm 62.80
suitable shade with ordinary paint of approved brand and
manufacture
121070 Painting on G.S. sheet with synthetic enamel paint of
approved brand and manufacture of required colour to give
an even shade
121071 New work (two or more coats) including a coat of approved Sqm 48.78
steel primer but excluding a coat of mordant solution
121072 Old work (One or more coats) Sqm 22.70
121080 Applying a coat of mordant solution on G.S. sheet
121081 With a solution of 38gm Of copper acetate in a liter of soft Sqm 13.33
water
121082 With a solution made of 13gms. Of hydrochloric acid in a Sqm 13.23
solution of 13gms. Each of copper chloride, copper nitrate
and ammonium chloride dissolved in a liter of soft water

121083 Treating new G.S. Sheets with a solution of 9 gms of washing Sqm 12.82
soda per litre of water, scrubbing the surface and rinsing with
water
121090 Painting with aluminium paint of approved brand and
121100 Painting with acid proof paint of approved brand and
manufacture of required colour to give an even shade
121110 Painting with black anti-corrosive bitumastic paint of
approved brand and manufacture to give an even shade
121120 Coal tarring two coat on new work using 0.16 and 0.12 litre Sqm 21.73
of coal tar per sqm in the first coat and second coat
respectively
121130 Coal tarring one coat on old work using 0.12 litre of coat tar Sqm 12.58
per sqm
121140 Painting (one or more coats) with black Japan paint of Sqm 23.25
approved brand and manufacture to give an even shade
121150 Painting two coats (excluding priming coat) with chocolate, Sqm 41.98
red, grey or buff ready mixed paint of approved quality, on
steel or wood work
121160 Painting one coat with chocolate, red, grey or buff ready Sqm 26.88
mixed paint of approved quality on steel or wood work
121170 Painting two coats (excluding priming coat) with white or Sqm 41.98
green ready mixed paint of approved quality, on steel or
wood work
121180 Painting one coat with white or green ready mixed paint of Sqm 29.78
approved quality on steel or wood work
121190 Spray painting with flat wall paint of approved quality
(excluding priming coat), to give an even shade
121192 One or more coat on old work Sqm 33.27
121200 Spray painting with superior quality lacquer paint of
approved quality (excluding priming coat), to give an even
121201 shade
Two or more coats on new work Sqm 70.58
121210 Powder coating/50 microns by spray method for all metal
surfaces to form priming coat after and including preparation
of surfaces by thoroughly cleaning, oil, grease, dust and
other foreign matter and also including pigment of any shade
121211 for :
Surfaces over 10 cm. in width/girth Sqm 35.23
121212 Surfaces upto 10 cm. in width/girth and not in conjunction metre 10.13
with similar painted surfaces
121213 Small articles not exceeding 0.1 sqm in area and not in Each 6.99
conjunction with similar painted surfaces

121220 Painting new work (two or more coats).with oil type wood Sqm 18.49
preservative of approved brand and manufacture
121230 Providing and applying two coats of fire retardant paint Sqm 268.95
unthinned on cleaned wood/ ply surface @ 1 litre per 3.5 sqm
per coat including preparation of base surface as per
recommendations of manufacturer to make the surface fire
retardant
121240 Lettering with "Black Japan" paint (two coats) of approved Each of 1 1.14
brand and manufacture cm height
121250 Lettering with “Synthetic Enamel” paint (two coats) of Each of 1 1.18
approved brand and manufacture cm height
121260 Relettering with "Black Japan" paint (one coat) Each of 1 0.88
cm height
121270 Relettering with “Synthetic Enamel” paint (one coat) Each of 1 1.06
cm height
121280 Painting border lines upto 150 mm width with two coats of Each of 1 0.94
synthetic enamel paint cm height
PAINTING OF PIPES AND FITTINGS

122010 Painting (two or more coats) on rain water, soil, waste and
vent pipes and fittings with black anticorrosive bitumastic
paint approved brand and manufacture over and including a
priming of ready mixed zinc chromate yellow primer on new
work
122011 75mm diameter pipes metre 12.30
122020 Painting (one or more coats) on rain water, soil, waste and
vent pipes and fittings with black anticorrosive bitumastic
paint approved brand and manufacture on old work
122030 Painting (two or more coats) on rain water, soil, waste and
vent pipes and fittings with synthetic enamel paint of
approved brand and manufacture and required colour/ anti
corrosive black enamel paint of approved quality. over a
priming coat of approved steel primer on new work
122040 Painting one or more coat (on old work) on rain water, soil,
waste and vent pipes and fittings with synthetic enamel
paint of approved brand and manufacture and required colour
/ anti corrosive black enamel paint of approved quality
122041 75 mm dia. Pipe metre 6.15
122042 100 mm dia. pipe metre 7.94

122050 Painting two coats on G.I. Pipes and fittings with synthetic
enamel white paint over a ready mixed priming coat, both of
approved quality
122051 15mm diameter pipe metre 5.48
122060 Repainting one coat on G.I. Pipes and fittings with synthetic
enamel white paint of approved quality
122070 Painting G.I. Pipes (New work) and fittings with two coats of
anti-corrosive bitumastic paint of approved quality
PAINTING OF SPECIAL ITEMS
123010 Painting, one coat , any shade as directed of approved make
and brand a) Trusses upto 9m clear span and b) Staging
with O.H. tank where staging is upto 2.5m in height
123011 With Red Oxide metal primer as per IS:123 Sqm 13.85
123012 With Zinc Chromate primer as per IS:104 Sqm 12.92
123013 With Synthetic Enamel paint. Sqm 23.03
123014 With Aluminium paint as per IS:2339. Sqm 15.39
123020 Painting, Two coat , any shade as directed of approved make
and brand a) Trusses upto 9m clear span and b) Staging
with O.H. tank where staging is upto 2.5m in height
123023 With Synthetic Enamel paint. Sqm 44.13
123024 With Aluminium paint as per IS:2339. Sqm 27.84
123030 Painting, one coat, any shade as directed of approved make
and brand a) Trusses exceeding 9m clear span, b) Staging
with O.H. tank where staging is more than 2.5m in height, c)
Flood light towers, d) Chimneys and similar structures


123033 With Synthetic Enamel paint Sqm 26.59
123034 With Aluminium paint as per IS:2339 Sqm 18.95
123040 Painting, Two coat, any shade as directed of approved make
and brand a) Trusses exceeding 9m clear span, b) Staging
with O.H. tank where staging is more than 2.5m in height, c)
Flood light towers, d) Chimneys and similar structures
123043 With Synthetic Enamel paint Sqm 46.73
123044 With Aluminium paint as per IS:2339 Sqm 33.37
123050 Painting (any shade as directed) with synthetic enamel paint Sqm 57.88
of approved make and brand) telegraph OHE mast number
plate including lettering complete (single plate)
123060 Painting (any shade as directed) with synthetic enamel paint Sqm 67.68
of approved make and brand telegraph OHE mast number
plate including lettering complete (double plate)
123070 Painting fire buckets with Synthetic Enamel paint two coats. Each 64.78
(Inside and outside complete)
123080 Painting human figures on latrine walls with Synthetic Each 34.70
Enamel paint two coats, including the background complete
123090 Painting line clear apparatus with Synthetic Enamel paint two Each 201.30
coats
123100 Painting Station Name boards (both sides) including lettering
on both sides two coats of synthetic enamel paint to give an
even shade
123101 Board area more than 2 sqm Each 196.97
123102 Board area upto 2 sqm Each 153.71
123110 Painting and lettering gradient posts, km posts, curve plates, Each 104.30
boundary pillars/marks etc two coats (both sides) along the
railway tracks
VARNISHING AND POLISHING
124010 Varnishing with varnish of approved brand and manufacture
124011 On new work - two or more coats of glue sizing with copal Sqm 59.86
varnish over an under coat of flatting varnish
124012 On old work - one or more coats with copal varnish Sqm 23.54
124013 On new work two or more coats glue sizing with spar varnish Sqm 62.54
or an under coat of flatting varnish
124014 On old work one or more coats with spar varnish Sqm 25.62
124020 French spirit polishing
124021 Two or more coats on new work including a coat of wood Sqm 98.87
124022 filler
One or more coats on old work Sqm 50.76
124030 Polishing on wood work with ready made wax polish of
approved brand and manufacture
124031 New work (two or more coats) Sqm 48.56
124040 Melamine polishing on wood work (one or more coats) Sqm 32.53

124050 Varnishing with flatting varnish of approved brand and Sqm 24.55
manufacture one or more coats on old work
124060 Oiling two coats with raw linseed oil Sqm 21.90
124070 Oiling one coat with raw linseed oil Sqm 14.31
124080 Bees waxing on wood work with local made wax polish with
proportion 2:1.1/2 : 1 : 1/2. (2 bees wax : 1.1/2 linseed oil :
1 turpentine oil :1/2 varnish by weight)
MISCELLANEOUS
125010 Removing old paint with paint remover of approved Sqm 14.82
manufacture. Note : Payment under these items shall be
made only where complete removal of old paint or varnish is
ordered to be done and area to be paid under this item shall
be specified in advance in writing by Engineer in charge
125020 Removing old paint with caustic soda solution. The rate Sqm 18.27
includes cost of labour, consumables, brushes, tools and
plants, ladders, scaffoldings, staging etc. (Including high or
special slung scaffolding if required as per site conditions)
125030 Removing old paint with blow lamp. Note : Payment under Sqm 27.78
these items shall be made only where complete removal of
old paint or varnish is ordered to be done and area to be paid
under complete removal of paint shall be specified in advance
in writing by Engineer in charge
125040 Cleaning and washing glasses / FRP sheets / Transparent Sqm 9.93
sheets or like material in trusses, sky lights, north lights,
ventilators, of work shops and loco sheds or similar
structures. (It will include both the sides and measurements
will be for one side only)
125050 Supplying printing and fixing banner made of Flex Fibre Cloth Sqm 299.09
with digital printing as per Railways approved matter, colour,
pattern etc. complete job
126010
126020
126030
126040
126050
126060
126070
126080
126090

IR's Unified Standard Schedule Of Rates 2010 Chapter-13 : Water Supply
CHAPTER - 13 : WATER SUPPLY
Cement
Qty.(qtl.)
PE-AL-PE COMPOSITE PRESSURE PIPES
131010 Providing and fixing Polyethelene-Aluminium-
Polyethelene (PE-AL-PE) Composite Pressure Pipes
conforming to IS-15450 U.V. stabilized with carbon
black having thermal stability for hot & cold water
supply, capable to withstand temperature up to 80º
C including all special fittings of composite material
(engineering plastic blend and brass inserts
wherever required) e.g. elbows, tees, reducers,
couplers & connectors etc. with clamps at 1.00 M
spacing. This includes cost of cutting chases, where
necessary, testing of joints complete as per direction
of the Engineer-in-charge. Internal work - Exposed
131011 on wall
1216 (16mm OD) pipe metre 187.00
131012 1620 (20mm OD) pipe metre 226.49
131013 2025 (25mm OD) pipe metre 272.77
131014 2532 (32mm OD) pipe metre 361.41
131015 3240 (40mm OD) pipe metre 464.51
131016 4050 (50mm OD) pipe metre 597.38
C, including all special fittings of composite material
couplers & connectors etc. with clamps at 1.00 M
spacing. This includes cost of cutting chases, where
necessary, testing of joints complete as per direction
of the Engineer-in-charge. concealed work incl.
cutting chases & making good the wall
131021 1216 (16mm OD) pipe metre 225.15 0.01
131022 1620 (20mm OD) pipe metre 261.39 0.01
131023 2025 (25mm OD) pipe metre 304.42 0.01
131024 2532 (32mm OD) pipe metre 386.72 0.01
C including all special fittings of composite material
couplers & connectors etc. with trenching, refilling
and testing of joints complete as per direction of the
Engineer-in-charge (external work)
131031 1216 (16mm OD) pipe metre 182.69
131032 1620 (20mm OD) pipe metre 218.93

Cement
Qty.(qtl.)
131033 2025 (25mm OD) pipe metre 261.96
131034 2532 (32mm OD) pipe metre 344.25
131035 3240 (40mm OD) pipe metre 439.41
131036 4050 (50mm OD) pipe metre 572.29
131040 Providing and fixing 3 layer PP-R (Poly Propylene
Random copolymer) pipes, approved by CBRI and
conforming to IS:15801; SDR 7.4 U V stabilized &
anti-microbial fusion welded, having thermal stability
for hot & cold water supply including all PP-R plain &
brass threaded polypropylene random fittings
including fixing pipe with clamps at 1.0m spacing
This includes testing of joints complete as per
direction of Engineer-in-Charge. Internal work –
exposed on wall
131041 PN-16 Pipe, 16mm OD metre 103.14
conforming to IS:15801; SDR 7.4 U V stabilized &
anti-microbial fusion welded, having thermal stability
for hot & cold water supply including all PP-R plain &
including fixing the pipe with clamps at 1.00m
spacing in. This includes the cost of cutting chases
and making good the same including testing of joints
complete as per direction of Engineer-in-Charge.
Concealed work including cutting chases and making
good the walls etc.
131051 PN-16 Pipe, 16mm OD metre 140.97 0.01
conforming to IS:15801; U V stabilized & anti-
microbial fusion welded, having thermal stability for
hot & cold water supply including all PP-R plain &
including trenching, refilling & testing of joints
complete as per direction of Engineer-in-Charge.
External work
131061 PN-16 Pipe, 16mm OD (SDR-7.4) metre 98.51

Cement
Qty.(qtl.)
Random copolymer) designated as PN-10 pipes,
approved by CBRI and conforming to IS:15801; U V
stabilized & anti-microbial fusion welded, having
thermal stability for hot & cold water supply
including all PP-R plain & brass threaded
polypropylene random fittings including trenching,
refilling & testing of joints complete as per direction
of Engineer-in-Charge. External work (higher dia)
131071 PN-10 Pipe, 110mm OD (SDR-11) metre 1890.19
131072 PN-10 Pipe, 160mm OD (SDR-11) metre 3811.32
131080 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with
clamps at 1.00m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement
and testing of joints complete as per direction of
Engineer-in-Charge. Internal work – exposed on wall
131081 15mm nominal outer dia. Pipes metre 116.76
threaded fittings including fixing the pipe with
clamps at 1.00m spacing in This includes jointing of
pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the
same including testing of joints complete as per
direction of Engineer-in-Charge. Concealed work
including cutting chases and making good the walls
131091 etc.
15mm nominal outer dia. Pipes metre 151.67 0.01
131092 20mm nominal outer dia. Pipes metre 170.79 0.01
threaded fittings. This includes jointing of pipes &
fittings with one step CPVC solvent cement,
trenching, refilling and testing of joints complete as
per direction of Engineer-in-Charge. External work

Cement
Qty.(qtl.)
131107 62.50mm nominal outer dia. Pipes metre 1293.72
(CPVC) Large diameter pipes, having thermal
stability for hot & cold water supply including all
CPVC plain & brass threaded fittings. This includes
jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling and testing of
joints complete as per direction of Engineer-in-
Charge. External work (higher dia)
131130 Providing and fixing G.I. pipes complete with G.I.
fittings and clamps, including cutting and making
good the walls etc. Internal work – Exposed on wall
131131 15 mm dia. nominal bore metre 129.09
131140 Providing and fixing medium grade G.I. pipes
complete with G.I. fittings and clamps, including
cutting and making good the wall etc. Concealed
pipe including painting with anti corrosive bitumestic
paint, cutting chase and making good the wall
131141 15 mm dia. nominal bore metre 170.00 0.01
131150 Providing and fixing medium grade G.I. pipes
complete with G.I. fittings including trenching and
refilling etc. External Work
131160 Making connection of medium grade G.I. distribution
branch with G.I. main of following sizes by providing
and fixing tee, including cutting and threading the
pipe etc. complete
131161 25 to 40 mm nominal bore Each 215.48
131162 50 to 80 mm nominal bore Each 528.66
131163 100 mm to 150 mm dia. Each 948.61
131170 Fixing water meter and stop cock in G.I. pipe line Each 161.55
including cutting and threading the pipe and making
long screws etc. complete (cost of water meter and
stop cock to be paid separately)

Cement
Qty.(qtl.)
131180 Providing and fixing PP-R Gate Valve fusion welded,
having thermal stability for hot & cold water supply
and testing of joints complete as per direction of
engineer in charge
131181 25 mm Gate Valve Each 421.59
131190 Providing and fixing PP-R Brass Ball Valve fusion
welded, having thermal stability for hot & cold water
supply and testing of joints complete as per
direction of engineer in charge
131191 20mm Ball Valve Each 656.79
131200 Providing and fixing PP-R Male adopter conforming to
PN-25 rating with marking on each fitting, fusion
welded, having thermal stability for hot & cold water
supply and testing of joints complete as per
direction of engineer in charge
131201 20mm adopter for PPR-GI connection Each 196.64
BRASS & C P BRASS fittings
132010 Providing and fixing brass bib cock of approved
quality
132011 15 mm nominal bore Each 215.72
132020 Providing and fixing brass stop cock of approved
quality
132030 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end)

Cement
Qty.(qtl.)
132040 Providing and fixing ball valve (brass) of approved
quality complete high or low pressure with plastic
floats complete :
132050 Providing and fixing gun metal non-return valve of
25 mm nominal bore approved quality (screwed
end)
132051 Horizontal Each 242.42
132052 Vertical Each 753.48
132060 Providing and fixing gun metal non- return valve of
end)
end)
end)
end)
end)
132110 Providing and fixing gun metal non-return valve of
end)
132120 Providing and fixing brass ferrule with C.I. mouth
cover including boring and tapping the main

Cement
Qty.(qtl.)
132130 Providing and fixing unplasticised PVC connection
pipe with brass unions : 30 cm length
132140 Providing and fixing unplasticised PVC connection
pipe with brass unions: 45 cm length
132150 Providing and fixing CP Copper connection pipe with
brass unions 30 cm length
132160 Providing and fixing CP Copper connection pipe with
brass unions 45 cm length
132170 Providing and fixing C.P. brass shower rose with 15
or 20 mm inlet :
132171 100mm diameter Each 202.87
132172 150 mm diameter Each 279.34
132180 Providing and fixing C.P. brass bib cock, 15mm Each 409.49
nominal bore, of approved quality conforming to
IS:8931
132190 Providing and fixing C.P. brass long nose bib cock, Each 403.21
15 mm nominal bore, of approved quality
conforming to IS standards and weighing not less
132200 than 810 gms
Providing and fixing C.P. brass long body bib cock, Each 382.91
15 mm nominal bore, of approved quality
conforming to IS standards and weighing not less
132210 than 690 gms
Providing and fixing C.P. brass stop cock, 15 mm Each 351.82
nominal bore, (concealed) of standard design and
of approved make conforming to IS:8931
132220 Providing and fixing C.P. brass angle valve for basin Each 401.82
mixer and geyser points of approved quality
conforming to IS:8931
132230 Supplying and fixing brass chromium plated (Two in Each 1335.63
one) type wall mixer having either fixed type over
head shower or telephonic shower as approved by
Engineer In-charge including all components like
adjustable legs, wall flange, rigid tube or flexible
pipe etc. complete
132240 Supplying and fixing brass chromium plated (Three- Each 1660.26
in- one) type wall mixer having fixed type over head
shower and also having flexible type telephonic
shower including all components like adjustable legs,
rigid tube, flexible pipe etc. complete

Cement
Qty.(qtl.)
132250 Supplying and fixing brass chromium plated (Two in Each 1852.50 0.00
one) type wall mixer SINGLE LEVER HOT AND COLD
WATER MIXER having either fixed type over head
shower or telephonic shower as approved by
Engineer In-charge including all components like
adjustable legs, wall flange, rigid tube or flexible
pipe etc. complete
C. I. / DUCTILE IRON PIPES AND SPECIALS
133010 Laying in position centrifugally cast (spun) iron S&S quintal 69.76 0.00
or flanged pipes (excluding cost of pipe)
133020 Laying in position S&S or flanged C.I. special such as quintal 127.20 0.00
tees, bends, collars, tapers and caps etc.(excluding
cost of specials)
133030 Providing and laying S&S C.I. standard specials such
as tees, bends, collars, tapers, caps etc. (Heavy
class)
133031 Upto 300mm dia. quintal 5707.90 0.00
133032 Over 300mm dia. quintal 5812.43
133040 Providing and laying flanged C.I. standard specials
such as tees, bends, collars, tapers, caps etc.,
suitable for flanged jointing as per IS:1538 :
133041 Upto 300 mm dia quintal 5998.27
133042 Over 300 mm dia quintal 6000.04
133050 Providing and laying S&S centrifugally cast (spun)
iron pipes (Class LA) conforming to IS - 1536 : upto
300 mm dia.
133051 80mm dia pipe. metre 825.63
133052 100 mm dia. pipe metre 1115.68
133053 125 mm dia. pipe metre 1309.07
133054 150 mm dia. pipe metre 1659.53
133055 200 mm dia. pipe metre 2164.97
133056 250 mm dia. pipe metre 2372.50
133057 300 mm dia. pipe metre 4488.81
iron pipes (Class LA) conforming to IS - 1536 :
above 300 mm dia.
133061 350 mm dia. pipe metre 5526.43
133062 400 mm dia. pipe metre 6348.70
133063 450 mm dia. pipe metre 7287.01
133064 500 mm dia. pipe metre 8398.76
133065 600 mm dia. pipe metre 10087.00
iron pipes (Class A) conforming to IS - 1536 :
133071 80mm dia. pipe metre 1020.18
133072 100 mm dia. pipe metre 1245.26
133073 125 mm dia. pipe metre 1450.68
133074 150 mm dia. pipe metre 1766.92
133075 200 mm dia. pipe metre 2197.91
133076 250 mm dia. pipe metre 3272.30
133077 300 mm dia. pipe metre 4345.00

Cement
Qty.(qtl.)
133080 Providing and laying S&S Centrifugally Cast (Spun)
Ductile Iron Pipes conforming to IS : 8329 of Class K-
7 up to 500 mm dia
133081 100mm dia Ductile Iron CLass K - 7 pipes metre 1055.95
7 Above 500 mm dia
133092 700mm dia Ductile Iron CLass K – 7 pipes metre 11332.73
9 up to 500 mm dia
9 Above 500 mm dia
133120 Providing and laying Double Flanged
(Screwed/Welded) Centrifugally (Spun) Ductile Iron
Pipes of Class K - 9 conforming to IS : 8329 up to
500 mm dia
133121 100mm dia Ductile Iron Double Flanged metre 2107.26

Cement
Qty.(qtl.)
133130 Providing and laying Double Flanged
(Screwed/Welded) Centrifugally (Spun) Ductile Iron
Pipes of Class K - 9 conforming to IS : 8329 Above
500 mm dia
133140 Providing lead caulked joints to spun iron or C.I./ DI
pipes and specials including testing of joints but
excluding the cost of pig lead up to 400 mm dia
133141 80mmdia pipe Each 101.97
133142 100 mm diameter pipe Each 109.64
133143 125 mm dia. pipe Each 158.31
133144 150 mm dia. pipe Each 162.56
133145 200 mm dia. pipe Each 215.77
133146 250 mm dia. pipe Each 273.15
133147 300 mm dia. pipe Each 329.62
133148 350 mm dia. pipe Each 341.82
133149 400 mm dia. pipe Each 442.24
133150 Providing lead caulked joints to spun iron or C.I./ DI
pipes and specials including testing of joints but
excluding the cost of pig lead Above 400 mm dia
133151 450 mm dia. pipe Each 494.39
133152 500 mm dia. pipe Each 523.94
133153 600 mm dia. pipe Each 702.24
133160 Supplying pig lead at site of work quintal 15182.43
133170 Providing flanged joints to double flanged C.I./ D.I.
pipes and specials including fittings, packings &
testing of joints up to 400 mm dia
133171 80 mm dia. pipe Each 94.63
133172 100 mm dia. pipe Each 169.11
133173 125 mm dia. pipe Each 176.08
133174 150 mm dia. pipe Each 234.93
133175 200 mm dia. pipe Each 233.72
133176 250 mm dia. pipe Each 338.11
133177 300 mm dia. pipe Each 434.51
133178 350 mm dia. pipe Each 591.03
133179 400 mm dia. pipe Each 950.44
133180 Providing flanged joints to double flanged C.I./ D.I.
pipes and specials including fittings, packings &
testing of joints Above 400 mm dia
133181 450 mm dia. pipe Each 1155.19
133182 500 mm dia. pipe Each 1233.90
133183 600 mm dia. pipe Each 1493.96
C.I. SLUICE VALVES AND FIXTURES
133190 Providing and fixing C.I. sluice valves (with cap)
complete with bolts, nuts, rubber insertions etc. 80
mm dia. (the tail pieces if required will be paid
separately)
133191 Class I Each 4171.87
133192 Class II Each 3603.39

Cement
Qty.(qtl.)
mm dia (the tail pieces if required will be paid
separately)
133201 Class I Each 5594.71
133202 Class II Each 4443.32
separately)
133211 Class I Each 6466.66
133212 Class II Each 5057.70
separately)
133221 Class I Each 7186.59 0.00
133222 Class II Each 5993.37 0.00
separately).
133231 Class I Each 14566.70
133232 Class II Each 9523.56
separately)
133241 Class I Each 21125.04
133242 Class II Each 10195.85
separately)
133251 Class I Each 26104.83
133252 Class II Each 12441.38
AIR VALVE AND WATER METER (BULK TYPE)
133260 Providing and fixing C.I. double acting air valve of
approved quality with bolts, nuts, rubber insertions
etc. complete (The tail pieces, tapers etc if required
will be paid separately)
133261 50 mm dia Each 4104.09
133262 80 mm dia Each 5775.67
133263 100 mm dia Each 7504.45
133270 Providing and fixing enclosed type water meter (bulk
type) conforming to IS : 2373 and tested by
Municipal Board complete with bolts, nuts, rubber
insertions etc. (The tail pieces if required will be
paid separately)
133271 80 mm dia nominal bore Each 3102.23

Cement
Qty.(qtl.)
133280 Supplying, installing & fixing in position including
field testing, domestic type water meter, horizontal
inferential, single jet or multi jet, dry dial suitable
upto 500C temperature, duly sealed against
tampering, complete with couplings on both ends,
manufactured by approved firms, confirming to
Class B as per IS 779 with manufacturer’s test
certificate, guarantee certificate including cost of
material & labour. The rate also includes obtaining
Municipal approval as per local Municipal rules, if any
133281 15 mm bore Each 917.75
133282 20 mm bore Each 1504.37
133283 25 mm bore Each 2108.34
133284 40 mm bore Each 2950.40
133290 Providing and fixing C.I. dirt box strainer for bulk
type water meter with nuts, bolts, rubber insertions
etc. complete conforming to IS : 2373
133291 80 mm dia Each 3478.23
133292 100 mm dia Each 4929.64
133293 150 mm dia Each 6427.20
133294 200 mm dia Each 8285.50
133300 Providing and laying S&S C.I. Standard specials such
as tees, bends, collars tapers and caps etc, suitable
for flanged jointing as per IS : 1538
133301 Upto 300 mm dia Quintal 6375.76
133302 Above 300 mm dia Quintal 6977.80
133310 Providing and laying S&S C.I. Standard specials
suitable for mechanical jointing as per IS : 13382
133311 Upto 300mm dia Quintal 7101.70
133312 Above 300mm dia Quintal 6625.48
133320 Providing and laying D.I. Specials of Class K - 12
suitable for push-on jointing as per IS : 9523
133330 Providing and laying D.I. Specials of Class K - 12
suitable for mechanical jointing as per IS : 9523
133340 Providing push-on-joints to Centrifugally (Spun) Cast
Iron Pipes or Ductile Iron Pipes including testing of
joints and including the cost of rubber gasket
133341 100mm dia pipes Each 52.37

Cement
Qty.(qtl.)
133350 Providing push-on-joints to Centrifugally (Spun) Cast
Iron Pipes or Ductile Iron Pipes including testing of
joints and including the cost of rubber gasket. Above
500 mm dia
133356 1000mm dia pipes Each 1771.08
133360 Providing and laying Double Flanged Pipe
(screwed/welded) Centrifugally (Spun) Cast Iron,
Class B (IS : 1536)
133361 100mm dia C.I. Double Flanged Pipe metre 1530.14
133370 Providing and laying Double Flanged Pipe
(screwed/welded) Centrifugally (Spun) Cast Iron,
Class B (IS : 1536) Above 500 mm dia.
133380 Disinfecting C.I./G.I/D.I/PVC water mains by
flushing with water containing bleaching powder at
0.5 gms per litre of water and cleaning the same
with fresh water, operation to be repeated three
times including getting the sample of water from the
disinfected main tested in approved laboratory up to
400 mm dia.
133381 80mm diameter C.I. pipe 100 m 368.06
133390 Disinfecting C.I./G.I/D.I/PVC water mains by flushing
with water containing bleaching powder at 0.5 gms
per litre of water and cleaning the same with fresh
water, operation to be repeated three times
including getting the sample of water from the
disinfected main tested in approved laboratory
Above 400 mm dia

Cement
Qty.(qtl.)
133400 Extra for every operation on item no. 133380
disinfecting the C.I. main by flushing with water
containing bleaching powder at 0.5gms per litre of
water and cleaning the same with fresh water,
including getting the samples of water tested in the
approved laboratory: up to 400 mm dia.
133410 Extra for every operation over item no. 133380
disinfecting the C.I. main by flushing with water
containing bleaching powder at 0.5gms per litre of
water and cleaning the same with fresh water,
including getting the samples of water tested in the
approved laboratory: Above 400 mm dia.
133411 450mm diameter C.I. pipe 100 m 783.67 0.00
133420 Dismantling old CI/GI/WI/DI pipes including
excavation and refilling trenches after taking out the
pipes, breaking lead caulked joints, melting of lead
and making into blocks including stacking of pipes at
site lead up to 50 M: : up to 400 mm dia.
133421 80mm diameter C.I. pipe metre 74.48
133430 Dismantling old CI/GI/WI/DI pipes including
pipes, breaking lead caulked joints, melting of lead
and making into blocks including stacking of pipes at
site lead up to 50 M: : Above 400 mm dia.
133440 Labour for cutting C.I. pipe with steel saw for each
cut : up to 400 mm dia.
133441 80mm diameter C.I. pipe Each 28.57

Cement
Qty.(qtl.)
133450 Labour for cutting C.I. pipe with steel saw for each
cut above 400 mm dia.
133460 Disconnecting and taking out sluice valves, water Each 56.53
hydrants etc in CI pipes
133470 Cutting of GI, WI, in true edge with steel saw;- (if
not already covered in the item), for each cut
133471 upto 40 mm dia. Each 14.87
133472 above 40 mm and upto 80 mm dia. Each 29.01
133480 Rethreading/reconditioning ends of old GI pipes Each 11.11
P.T.M.T. FITTINGS
134010 Providing and fixing PTMT bib cock of approved
quality and colour
134011 15mm nominal bore, 86mm long. Weighing not less Each 136.26
than 88 gms
than 93 gms
than 99 gms
than 110 gms
134020 Providing and fixing PTMT stop cock of approved
quality and colour
than 88 gms
than 88 gms
134023 Concealed stop cock, 15mm nominal bore, 108mm Each 232.95
long. Weighing not less than 108gms
134030 Providing and fixing PTMT pillar cock of approved
quality and colour
than 110 gms
134032 15mm nominal size, 125 mm long foam flow. Each 249.71
Weighing not less than 120 gms
134040 Providing and fixing PTMT push cock of approved
quality and colour
than 75 gms
134042 15mm nominal size, 80 mm long. Weighing not less Each 129.38
than 46 gms
134050 Providing and fixing PTMT grating of approved
quality and colour

Cement
Qty.(qtl.)
134051 Circular type 100 mm nominal dia Each 45.10
134052 Circular type 125 mm nominal dia with 25mm waste Each 55.55
hole
134053 Rectangular type with openable circular lid. 150mm Each 137.24
nominal size square, 100mm diameter of the inner
hinged round grating
134060 Providing and fixing PTMT Ball cock of approved
quality, colour and make complete with Epoxy
coated aluminium rod with L.P./H.P.H.D. plastic ball
than 138 gms
than 198 gms
134063 25mm nominal bore, 152mm long. Weighing not less Each 582.77 0.00
than 440 gms
than 690 gms
than 1240 gms
134070 Providing and fixing PTMT angle stop cock 15mm Each 178.55
nominal bore. Weighing not less than 85 gms
134080 Providing and fixing PTMT swiveling shower, 15mm Each 113.55
nominal bore. Weighing not less than 40 gms
134090 Providing and fixing PTMT soap Dish Holder having Each 144.13
length of 138mm, breadth 102mm, height of 75mm
with concealed fitting arrangements. Weighing not
less than 106 gms
134100 Providing and fixing unplasticised P.V.C. connection
pipe with PTMT Nuts, collar and bush of approved
quality and colour
134101 15 mm nominal bore with 30cm length Each 58.91
134102 15 mm nominal bore. with 45cm length Each 61.00
134110 Providing and fixing PTMT extension nipple for water
tank pipe, fittings of approved quality and colour
134111 15 mm nominal bore. Weighing not less than 32gms Each 41.83
134112 20 mm nominal bore. Weighing not les than 40gms Each 55.32
134113 25 mm nominal bore. Weighing not less than 62gms Each 73.62
HYDRANTS
135010 Providing and fixing cast iron water hydrant one way Each 1164.15
for carriage washing lines including cost of jointing
material complete as per approved drawing {Drg No.
8373/M.(NR) used for analysis}
135020 Providing and fixing cast iron water hydrant two way Each 1280.65
for carriage washing lines including cost of jointing
material complete as per approved drawing {Engg
drawing no 250. (NR), used for analysis}
135030 Providing and fixing cast iron spindle fire hydrant 65 Each 2120.88
mm outlet, complete including cost of jointing
material complete as (bolts, nuts and rubber
insertions etc)

Cement
Qty.(qtl.)
135040 Supplying, fitting & fixing in position C.I. Fire Each 7108.92
Hydrant stand post type ISI marked (IS:908)
containing stand post column having single spout
(outlet), duck foot bend, inlet 80 mm dia. with one
sluice valve, surface box etc. complete in all respect
MANHOLES
136010 Constructing masonry Chamber 30x30x50 cm, inside Each 581.08 0.26
with 7.5 class designation brick work with FPS Bricks
in cement mortar 1:4 (1 cement :4 coarse sand) for
stop cock, with C. I. surface box 100x100 x75 mm
(inside) with hinged cover fixed in cement concrete
slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ) necessary
excavation foundation concrete 1:5:10 ( 1 cement :5
fine sand:10 graded stone aggregate 40mm nominal
size ) and inside plastering with cement mortar 1:3
(1 cement :3 coarse sand) 12mm thick finished with
a floating coat of neat cement complete as per
standard design
sluice valve, with C.I. surface box 100mm. top
diameter and 160 mm bottom diameter and 180 mm
deep ( inside) with chained lid and RCC top slab
1:2:4 mix (1 cement :2 coarse sand : 4 graded
stone aggregate 20mm nominal size ) necessary
excavation foundation concrete 1:5:10 (1 cement :5
fine sand:10 graded stone aggregate 40 mm nominal
size ) and inside plastering with cement mortar 1:3
(1 cement :3 coarse sand) 12 mm thick finished with
standard design
136030 Constructing masonry Chamber 90x90x100 cm, Each 4189.39 2.48
inside with 7.5 class designation brick work with FPS
Bricks in cement mortar 1:4 ( 1 cement :4 coarse
sand) for sluice valve, with C.I. surface box 100 mm.
top diameter, 160 mm bottom diameter and 180 mm
deep ( inside) with chained lid and RCC top slab
1:2:4 mix ( 1 cement :2 coarse sand : 4 graded
size ) and inside plastering with cement mortar 1:3 (
1 cement :3 coarse sand) 12 mm thick finished with
standard design.

Cement
Qty.(qtl.)
136040 Constructing masonry Chamber 120x120x100 cm, Each 5082.32 3.50
inside with 7.5 class designation brick work with FPS
Bricks in cement mortar 1:4 ( 1 cement :4 coarse
sand ) for sluice valve, with C.I. surface box 100
mm. top diameter, 160 mm bottom diameter and
180 mm deep ( inside) with chained lid and RCC top
slab 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded
size ) and inside plastering with cement mortar 1:3 (
1 cement :3 coarse sand) 12 mm thick finished with
standard design.
in cement mortar 1:4 ( 1 cement :4 coarse sand) for
fire hydrants, with C.I. surface box 350x350 mm.
top and 165 mm deep ( inside) with chained lid and
RCC top slab 1:2:4 mix ( 1 cement :2 coarse sand :
4 graded stone aggregate 20 mm nominal size )
necessary excavation foundation concrete 1:5:10 ( 1
cement :5 fine sand:10 graded stone aggregate 40
mm nominal size ) and inside plastering with cement
mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick
finished with a floating coat of neat cement complete
as per standard design.
water meter complete with C.I. double flap surface
box 400x200x200mm. (inside) with locking
arrangement and RCC top slab 1:2:4 mix (1 cement
:2 coarse sand : 4 graded stone aggregate 20mm
nominal size) necessary excavation foundation
concrete 1:5:10 (1 cement :5 fine sand:10 graded
stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement :3
coarse sand) 12 mm thick finished with a floating
coat of neat cement complete as per standard
design.
136070 Providing and filling sand of grading zone IV or
coarser grade all round the G.I./C.I./D.I. pipes in
external work. Upto 100 mm dia.

Cement
Qty.(qtl.)
136080 Providing and filling sand of grading zone IV or
coarser grade all round the G.I./C.I./D.I. pipes in
external work above 100 mm dia.
136081 150 mm dia pipe metre 95.47
136090 Boring with 100mm diameter casing pipe for hand
pump/tube well in all soils except ordinary hard
rocks requiring blasting including removing the
casing pipe after the hand pipe/tube well is lowered
136091 and
Uptotested
6 metres depth metre 184.46
136092 Beyond 6 m and upto 12 m depth metre 217.47
136100 Providing and placing in position filters of 40 mm metre 575.11
diameter G.I. pipe with brass strainer of approved
quality
136110 Providing and fixing to filter and lowering to proper metre 243.90
levels 40 mm G.I. pipe for tube well including
cleaning and priming the tube well
136120 Providing and placing in position hand pump of Each 930.25
approved quality for 40 mm diameter G.I. pipe
complete with all accessories
136130 Providing and fixing G.I. Union in G.I. pipe including
cutting and threading the pipe and making long
screws etc. complete (new work)
136131 15mm nominal bore Each 97.78
136140 Providing and fixing G.I. Union in existing G.I. pipe
line, cutting and threading the pipe and making long
screws including excavation, refilling the earth or
cutting of wall and making good the same complete
wherever required

Cement
Qty.(qtl.)
136150 Providing and placing on terrace/staging (at all litre 8.03
heights) polyethylene water storage tank ISI :
12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and
the base support for tank
136160 Cutting holes up to 30x30cm in walls including Each 82.14 0.03
making good the same :
136170 Cutting holes up to 15x15cm in RCC floors and roofs Each 94.93 0.01
for passing drain pipe etc. and repairing the hole
after insertion of drain pipe etc. with cement
concrete 1:2:4 (1 cement :2 coarse sand: 4 graded
stone aggregate 20mm nominal size) including
finishing complete so as to make it leak proof
136180 Making chases up to 7.5x7.5cm in walls including metre 38.15 0.01
making good and finishing with matching surface
after housing G.I. pipe etc.
136190 Making hole up to 20x20 cm and embedding pipes Each 40.93 0.02
up to 150mm diameter in masonry and filling with
cement concrete 1:3:6 (1 cement :3 coarse sand 6
including disposal of malba
MISCELLANEOUS
137010 Supplying, fabricating and fixing M.S. flat angle iron Kg 93.16
pipe clamps, stays, etc. including drilling holes,
welding (if any) including nuts and bolts etc.
including all lifts
137020 Supplying and jointing cast iron concussion relief
(pressure) valves “Spring relief type”, with gun
metal fittings with casing lever complete in all
respects as per specifications
137021 80 mm bore Each 2611.83
137022 100 mm bore Each 3307.87
137030 Supplying and jointing expansion joint with cast iron
spigot, socket and flanged, accurately machined mild
steel guard bolts. Gland & socket duly brushed with
gun metal etc. complete in all respects conforming to
appropriate Indian Standard
137031 80 mm bore Each 483.73
137032 100 mm bore Each 656.94
137033 150 mm bore Each 929.51
137034 200 mm bore Each 1130.40
137035 250 mm bore Each 1550.71
137036 300 mm bore Each 2082.68
137037 350 mm bore Each 2574.87
137040 Supplying and jointing-in-position cast iron flanged,
end foot valve with strainer (of cast iron/galvanized
iron) swing type tested to withstand a pressure of 2
Kgs/cm2 complete in all respects, conforming to I.S.
4038
137041 80 mm size Each 1109.78
137042 100 mm size Each 1430.50

Cement
Qty.(qtl.)
137043 150 mm size Each 1800.64
137050 Supplying and jointing in position cast iron flanged
end foot valve with strainer, lift type, tested to
withstand a pressure of 20 Kgs/cm2, complete in all
respects, conforming to I.S. 4038
137051 150 mm size Each 1800.64
137052 200 mm size Each 2124.65
137060 Supplying and fixing on water tanks etc. slotted
WATER indicator board with M.S. Pulley ball bearing
type phosphorus bronze twisted wire, wood float etc.
complete in all respect and in metric units. The rate
includes fixing at all heights
137061 Up to 1.25 m long Each 1324.11
137062 More than 1.25 m long Each 1744.57
137070 Extra for supplying and fixing hand wheel in place of
spindle cap. For Sluice valves. ( If not covered by
rates of original Item)
137071 For sluice valves from 50 mm upto 80 mm bore Each 214.88
137072 For sluice valves from 100 mm and 125 mm bore Each 276.44
137073 For sluice valves for 150 mm bore Each 384.46
137074 For sluice valves of 200 mm & 250 mm bore Each 393.75
137075 For sluice valves of 300 mm bore Each 519.19
137080 Supplying, fitting and fixing float valve of cistern
complete with polythene ball as required including
all lead for replacement work. This include all work
for removing of existing float valve with connection,
delivery of released materials to SE/ Works store and
fixing of screw, coupling, back nuts etc.
137081 15 mm dia pipe Each 95.82
137082 20mm dia pipe Each 157.27
137090 Supplying, fitting and fixing polythene ball only as
required for cistern including all lead for:15mm dia
float valve for replacement work. This includes
removal of existing ball, if required and all works
required for fitting & fixing ball
137091 15 mm dia pipe Each 39.07
137100 Supplying, laying, jointing, fitting and fixing in
position R.C.C. spun pipes and collars class NP-2
conforming to I.S.458 with cement sand mortar
(1:3) on the cement concrete bed as required to
maintain proper grade & alignment including cutting
trenches and refilling the same with all lead. (Extra
Payment of bed concrete to be made as provided)
137101 150mm dia metre 291.43 0.01
137102 200mmdia metre 338.46 0.01
137103 250mm dia metre 389.91 0.01
137104 300mm dia metre 504.84 0.01
137105 400mm dia metre 708.75 0.02
137106 450mm dia metre 1116.24 0.02

Cement
Qty.(qtl.)
137107 500mm dia metre 1040.63 0.03
137110 Cleaning thoroughly inside/outside of old C.I. Pipes Sqm 25.33 0.00
and specials, removing rust, incrustations etc. and
dipping in hot Angus Smith’s solution. All materials
shall be as per relevant I.S. Specifications
RATES FOR LABOUR ONLY
138010 Laying C.I. Pipes including i) Cutting pipes and
drilling holes as and where required ii) Fitting up
specials like collars, tees, valves, bends etc. as and
where required iii) Lead upto 100 m iv) Keeping
pipes level or in prescribed grade, aligning pipes,
caulking joints v) Refilling and ramming trench after
the pipes have been tested to required pressure
138011 400 mm dia metre 343.40
138012 350 mm dia metre 298.31
138013 300 mm dia metre 270.89
138014 250 mm dia metre 237.96
138015 200 mm dia metre 204.86
138016 150 mm dia metre 174.25
138017 125 mm dia metre 154.40
138018 100 mm dia metre 133.79
138019 80 mm dia metre 115.09
138020 Laying G.I. or polythene / CI / DI / Concrete or alike
materials, pipes including -i) Fitting sockets, cutting,
pipe threading and drilling holes as and where
required. ii) Fitting up specials like tees, valves,
bends, nipples, water meters etc. as and where
required. iii) Lead upto 100 mm iv) Keeping pipes
level or in prescribed grade, aligning pipes, caulking
joints etc. v) Refilling and ramming trench complete
after the pipes have been tested to required pressure
138021 15 mm dia. metre 59.80
138022 20 mm dia. metre 61.61
138023 25 mm dia. metre 63.31
138024 32 mm dia. metre 64.49
138025 40 mm dia. metre 75.69
138026 50 mm dia. metre 84.84
138027 65 mm dia. metre 100.02
138028 80 mm dia. metre 111.30
138029 100 mm dia. metre 123.58
138030 Laying G.I. or polythene / CI / DI / Concrete or alike
materials, pipes including - i) Fitting sockets,
cutting, pipe threading and drilling holes as and
where required. ii) Fitting up specials like tees,
valves, bends, nipples, water meters etc. as and
where required iii) Lead upto 100 mm iv) Keeping
pipes level or in prescribed grade, aligning pipes,
caulking joints etc. v) Refilling and ramming trench
complete after the pipes have been tested to
138031 required
125 mm pressure
dia. metre 165.68
138032 150 mm dia. metre 186.90

Cement
Qty.(qtl.)
138040 Hoisting, fitting and fixing in position plastic moulded
water storage tank including making connection of
intake, delivery, outlet and overflow .pipes etc. with
all lead and lift upto all stories. Cost of tanks/fittings
to be paid separately
138041 200 ltr capacity tank Each 529.82
138045 2500 ltr Capacity tank Each 1378.93
138050 Taking out existing OH G.I. Tank & depositing the
same to railway store with lead upto 100 m and
all descent
138051 237.50-250 ltr capacity Each 581.14
138052 450-500 ltr capacity Each 728.69
138053 910-1000 ltr capacity Each 984.54
138054 1820 -2000 ltr capacity Each 1445.68
138060 Taking out existing OH plastic moulded water
storage tank & depositing the same to railway store
with lead upto 100 m and all descent
138061 200 ltrs capacity tank Each 487.17
138070 Taking out old C.I./G.I. Pipes including specials with
lead upto 100m and stacking at nominated place
including all excavation, refilling and making good
the surface, as required
138071 400mm dia metre 307.32
138072 350mm dia metre 296.91
138073 300mm dia metre 232.57
138074 250mm dia metre 199.89
138075 200mm dia metre 166.54
138076 150mm dia metre 128.23
138077 125mm dia metre 116.77
138078 100mm dia metre 95.26
138079 80mm dia. metre 78.12
138080 Taking out old C.I./G.I. Pipes and relaying the same
including followings : i) Taking out & refixing of
specials like sockets, bends, tees, valves etc. with
cutting and threading of pipes as required. ii)
Jointing of pipes as required. iii) Fixing pipe securely
to wall, post or any other structure with necessary
M.S. hook / clamp / rod / flat, nails etc. with all lead
138081 15 mm to 25 mm dia metre 72.82
138082 Above 25 mm dia and upto 50 mm metre 85.20

Cement
Qty.(qtl.)
138090 Cleaning old C.I./G.I. Pipes with all lead and lift etc.
138091 15 mm dia & upto 80 mm dia metre 13.53
138092 Above 80 mm dia & upto 150 mm dia metre 22.18
138100 Extra for laying pipes under track
138110 Extra for laying or taking out C.I./GI /WI / DI water
main or underground drain pipe along side running
track where adequate precaution are to be taken and
un - interrupted work is not possible
138114 Above 250 mm dia metre 108.44
138120 Cleaning of overhead and underground water tanks
incl. scrubbing, disinfection with bleaching powder
138121 For Tanks capacity upto 5000 litres litre 0.33
138122 For Tanks capacity over 5000 litres litre 0.28
139010
139020
139030
139040
139050
139060
139070
139080

IR's Unified Standard Schedule Of Rates 2010 Chapter-14 : Drainage And Sewarage
CHAPTER - 14 : DRAINAGE AND SEWERAGE
Cement
Qty.(qtl.)
Note : Rates given for all the items under sub-head
‘Drainage’ are applicable to work executed in soils
above sub-soil water level. Extra allowance has to be
made for work under sub-soil water level.
STONE WARE PIPES AND FITTINGS :
141010 Providing, laying and jointing glazed stoneware pipes
grade ‘A’ as per IS:651 including bends etc. with stiff
mixture of cement mortar in the proportion of 1:1
(1cement : 1fine sand) including testing of joints etc.
complete
141011 100mm diameter metre 150.72 0.022
141020 Providing, laying and jointing half round salt glazed
stone-ware pipes including bends etc with 1:1
cement and ordinary sand mortar including bends
141021 etc.
100mm dia. S.W. pipe metre 140.52 0.011
141022 150mm dia. S.W. pipe metre 203.26 0.017
141030 Providing and laying cement concrete 1:4:8
(1cement: 4coarse sand: 8graded stone aggregate
40mm nominal size) all round S.W. pipes including
bed concrete as per standard design
141031 100mm diameter S.W. pipe metre 220.33 0.250
141040 Providing and laying cement concrete 1:5:10
40mm nominal size) upto haunches of S.W. pipes
including bed concrete as per standard design

Cement
Qty.(qtl.)
141050 Providing and fixing square-mouth S.W. gully trap
grade ‘A’ complete with C.I. grating brick masonry
chamber with water tight C.I. cover with frame of
300x300mm size (inside) the weight of cover to be
not less than 4.50kg and frame to be not less than
2.70kg as per standard design
141051 100x100mm size P type With F.P.S. bricks class Each 1064.22 0.270
designation 75
141052 100x100mm size P type With Sewer bricks confirming Each 1184.68 0.270
to IS:4885
designation 75
141054 150x100mm size P type With Sewer. bricks Each 1127.12 0.260
confirming to IS:4885
designation 75
141056 180x150mm size P type With Sewer bricks confirming Each 1260.87 0.250
to IS:4885
NON PRESSURE PIPE (Factory Made)
142010 Providing and laying non-pressure NP2 class (light
duty) R.C.C. pipes including bends etc with collars
jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1cement: 2fine sand) including
testing of joints etc. complete upto 800mm dia.
142011 100mm dia. R.C.C. pipe metre 172.27 0.005
142020 Providing and laying non-pressure NP2 class (light
duty) R.C.C. pipes including bends etc with collars
jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1cement: 2fine sand) including
testing of joints etc. complete above 800mm dia.
142030 Providing and laying non-pressure NP3 class
(medium duty ) R.C.C. pipes including bends etc
with collars jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1cement: 2fine sand)
including testing of joints etc. complete up to 800mm
dia.

Cement
Qty.(qtl.)
142040 Providing and laying non-pressure NP3 class
(medium duty ) R.C.C. pipes including bends etc
with collars jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1cement: 2fine sand)
including testing of joints etc. complete above
142041 800mm
900mm dia.
dia. R.C.C. pipe metre 1828.60 0.049
MANHOLES
143010 Constructing brick masonry manhole in cement
mortar 1:4 (1cement: 4coarse sand) R.C.C. top slab
with 1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 20mm nominal size), foundation concrete
1:4:8 mix (1cement: 4coarse sand: 8graded stone
aggregate 40mm nominal size) inside plastering
12mm thick with cement mortar 1:3 (1cement:
3coarse sand) finished with floating coat of neat
cement and making channels in cement concrete
aggregate 20mm nominal size) finished with a
floating coat of neat cement complete as per
standard design
143011 Inside size 90x80cm and 45cm deep including C.I. Each 3940.81 2.920
cover with frame (light duty) 455x610mm internal
dimensions total weight of cover and frame to be not
less than 38kg (weight of cover 23kg and weight of
frame 15kg). With F.P.S. bricks class designation 7.5
cover with frame (light duty) 455x610mm internal
dimensions total weight of cover and frame to be not
frame 15kg)With Sewer bricks confirming to IS:4885
cover with frame (medium duty) 500mm internal
diameter, total weight of cover and frame to be not
frame 58kg). With F.P.S. bricks class designation 7.5

Cement
Qty.(qtl.)
cover with frame (medium duty) 500mm internal
frame 58kg). With Sewer bricks confirming to
IS:4885
143020 Deduct for providing S.F.R.C. Cover and frame(Heavy Each 3047.00 0.000
duty,HD-20 grade designation) 560mm internal
diameter conforming to IS:12592 in lieu of CI frame
& Cover from item 143013 to 143014
143030 Constructing brick masonry manhole in cement
mortar 1:4 (1cement: 4coarse sand) R.C.C. top slab
with 1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 20mm nominal size), foundation concrete
1:4:8 mix (1cement: 4coarse sand: 8graded stone
aggregate 40mm nominal size) inside plastering
12mm thick with cement mortar 1:3 (1cement:
3coarse sand) finished with floating coat of neat
cement and making channels in cement concrete
aggregate 20mm nominal size) finished with a
floating coat of neat cement complete as per
standard design
cover with frame (heavy duty) 560mm internal
frame 100kg). With F.P.S. bricks class designation
cover with frame (heavy duty) 560mm internal
frame 100kg). With Sewer bricks confirming to
IS:4885
143033 Deduct from 143030 for providing S.F.R.C. cover and Each 6866.88
frame (heavy duty, HD-20 grade designation) 560mm
internal diameter conforming to IS: 12592 in lieu of
CI frame & cover
143040 Extra for depth for manholes of size
143041 Size 90x80cm .With F.P.S Bricks class designation metre 2146.27 1.260
143042 7.5
Size 90x80cm .With Sewer bricks confirming to IS: metre 3063.66 1.260
4885
143043 Size 120x90cm With F.P.S Bricks class designation metre 2568.25 1.520
143044 7.5
Size 120x90cm With Sewer bricks confirming to IS: metre 3661.70 1.520
4885

Cement
Qty.(qtl.)
143050 Constructing brick masonry circular type manhole
0.91m internal dia at bottom and 0.56m dia at top in
cement mortar 1:4 (1cement: 4coarse sand), in side
cement plaster 12mm thick with cement mortar 1:3
(1cement: 3coarse sand) finished with a floating coat
of neat cement, foundation concrete 1:3:6 mix
40mm nominal size) and making necessary channel
in cement concrete 1:2:4 (1cement: 2coarse sand:
4graded stone aggregate 20mm nominal size)
finished with a floating coat of neat cement all
complete as per standard design.0.91m deep with
S.F.R.C. cover and frame (heavy duty, HD-20 grade
designation) 560mm internal diameter conforming to
IS: 12592, total weight of cover and frame to be not
less than 182kg, fixed in cement concrete 1:2:4
20mm nominal size) including centering, shuttering
all complete. (Excavation, foot rests and 12mm thick
cement plaster at the external surface shall be paid
for separately)
143051 With F.P.S Bricks class designation 7.5 Each 4181.99 2.750
143052 With Sewer bricks confirming to IS: 4885 Each 4714.37 2.750
143060 Extra depth for circular type manhole 0.91mm
internal dia (at bottom) beyond 0.91 m to 1.67m
143061 With F.P.S Bricks class designation 7.5 metre 1835.41 3.610
143062 With Sewer bricks confirming to IS: 4885 metre 2603.56 3.610
143070 Constructing brick masonry circular type
manhole1.22m internal dia at bottom and 0.56m dia
at top in cement mortar 1:4 (1cement: 4coarse
sand), in side cement plaster 12mm thick with
cement mortar 1:3 (1cement: 3coarse sand) finished
with a floating coat of neat cement, foundation
concrete 1:3:6 mix (1cement: 3coarse sand: 6graded
stone aggregate 40mm nominal size) and making
necessary channel in cement concrete 1:2:4
20mm nominal size) finished with a floating coat of
neat cement all complete as per standard design.
1.68m deep with S.F.R.C. cover and frame (heavy
duty, HD-20 grade designation) 560mm internal
diameter conforming to IS: 12592, total weight of
cover and frame to be not less than 182kg, fixed in
cement concrete 1:2:4 (1cement: 2coarse sand:
4graded stone aggregate 20mm nominal size). ..
Contd. -
.. Contd. -- including centering, shuttering all
complete. (Excavation, foot rests and 12mm thick
for separately)
143071 With F.P.S Bricks class designation 7.5 Each 6935.93 5.390
143072 With Sewer bricks confirming to IS: 4885 Each 8155.42 5.390

Cement
Qty.(qtl.)
143080 Extra depth for circular type manhole 1.22 mm
internal dia (at bottom) beyond 1.68m to 2.29 m
143081 With F.P.S. Bricks class designation 7.5 metre 2378.49 6.270
143082 With Sewer bricks confirming to IS:4885 metre 3381.09 6.270
143090 Constructing brick masonry circular manhole 1.52m
internal dia at bottom and 0.56m dia at top in cement
mortar 1:4 (1cement: 4coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3
(1cement: 3coarse sand) finished with a floating coat
of neat cement, foundation concrete 1:3:6 (1cement:
nominal size) and making necessary channel in
finished with a floating coat of neat cement all
complete as per standard design.2.30m deep with
S.F.R.C. cover and frame (heavy duty, HD-20 grade
designation) 560mm internal diameter conforming to
IS: 12592, total weight of cover and frame to be not
less than 182kg, fixed in cement concrete 1:2:4
20mm nominal size) including centering, shuttering
all complete. (Excavation, foot rests and 12mm thick
for separately)
143091 With F.P.S. bricks class designation 7.5 Each 13752.10 10.860
143092 With Sewer bricks confirming to IS:4885 Each 17210.39 10.860
143100 Extra depth for circular type manhole 1.52m internal
dia (at bottom) beyond 2.30m
143101 With F.P.S. bricks class designation 7.5 metre 5736.07 16.710
143102 With Sewer bricks confirming to IS:4885 metre 8328.72 16.710
143110 Providing M.S. foot rests including fixing in manholes
with 20x20x10cm cement concrete blocks 1:2:4
20mm nominal size) as per standard design
143111 With 20x20mm square bar Each 166.15 0.009
143112 With 20mm diameter round bar Each 136.53 0.009
143120 Replacement of M.S. foot rests in manholes/ septic
tanks or wells etc including dismantling concrete
blocks and fixing with 20x20x10cm cement concrete
blocks 1:2:4 (1cement: 2coarse sand:4graded stone
143121 With 20x20mm square bar Each 189.44 0.009
143122 With 20mm diameter round bar Each 159.82 0.009
143130 Supplying and fixing C.I. cover without frame for
manholes
143131 455x610mm rectangular C.I. cover (light duty) the Each 1127.26
weight of the cover to be not less than 23kg
143132 500mm diameter C.I. cover (medium duty) the Each 2909.00
weight of cover to be not less than 58kg

Cement
Qty.(qtl.)
143133 560mm diameter C.I. cover (heavy duty) the weight Each 4269.12
of cover to be not less than 108kg
Note : Normally CI covers should be provided only in
the locations where chances of theft are negligible
143140 Providing and fixing in position precast R.C.C.
manhole cover and frame of required shape and
approved quality. (As per IS 12592-1991)
143141 LD- 2.5 rectangular shape 600x450mm internal Each 922.97
dimensions
143142 LD- 2.5 square shape 450mm internal dimensions Each 852.95
143143 LD- 2.5 circular shape 450 mm internal diameter Each 992.33
143144 MD- 10 square shape 450mm internal dimensions Each 1172.44
143145 MD- 10 circular shape 500mm internal diameter Each 1216.64
143146 HD- 20 circular shape 560mm internal diameter Each 1654.50
143147 EHD- 35 circular shape 560mm internal dia. Each 1824.85
143150 Supplying, fitting & fixing in position reinforced
cement polymer concrete (R.C.P.C.) manhole cover
and frame to match with IS : 12592 with cement
conc. 1:2:4 for embedding the manhole cover frame
143151 a) 3 MT load bearing capacity manhole cover Each 1038.53
provided with 2 nos. lifter lock fitted with matching
frame (Size of cover : 440 mm dia. x 50 mm thick
and size of frame : 530 mm dia. x 100 mm thick)
143152 b) 12 MT load bearing capacity manhole cover Each 1245.57
143153 c) 25 MT load bearing capacity manhole cover Each 1442.93
143160 Supplying and fixing C.I. cover 300x300mm without Each 283.21
frame for gully trap (standard pattern) the weight of
cover to be not less than 4.5kg
143170 Making connection of drain or sewer line with existing
manhole including breaking into and making good the
walls, floors with cement concrete 1:2:4 mix
20mm nominal size) cement plastered on both sides
with cement mortar 1:3 (1cement: 3coarse sand)
finished with a floating coat of neat cement and
making necessary channels for the drain etc.
complete
143171 For pipes 100 to 230mm diameter Each 161.30 0.056

Cement
Qty.(qtl.)
143180 Providing sand cast iron drop connection externally
for 60cm drop from branch sewer line to main sewer
manhole including inspection and cleaning eye with
chain and lid, sand cast iron drop pipe and bend
encased all round with cement concrete 1:5:10
(1cement: 5fine sand: 10graded stone aggregate
40mm nominal size) with all centring and shuttering
required, cutting holes in walls and making good the
brick work in cement mortar 1:4 (1cement: 4 coarse
sand) plastered with cement mortar 1:3 (1cement:
3coarse sand) on inside of the manhole wall lead
caulked joints between sand cast iron pipes and
fittings, stiff cement mortar 1:1 (1cement: 1fine
sand) joints between sand cast iron tee and S.W.
pipe, making required channels complete as per
standard design and specifications
143181 100mm dia. Sand cast iron drop connection Each 2820.62 0.340
143182 150mm dia. Sand cast iron drop connection Each 3841.12 0.460
143190 Extra for depths beyond 60cm of sand cast iron drop
connection complete
143191 For 100mm dia. Sand cast iron drop connection Each 1182.07 0.210
143192 For 150mm dia. Sand cast iron drop connection Each 1231.64 0.260
143200 Raising manhole cover and frame slab to required
level including dismantling existing slab and making
good the damage as required (Brick work for raising
depth of manhole to be paid separately).(Assuming
that the OLD slab is dismantled and not reused)
143201 Rectangular manhole 90x80cm (Inside dimensions) Each 578.39 0.200
with rectangular cover 600x450mm of grade LD- 2.5
with circular cover 500mm dia of grade MD- 10
with circular cover 560mm dia of grade HD- 20
143204 Circular manhole 140cm dia (Inside dimensions) Each 87.27 0.280
with circular cover 600mm dia of grade EHD- 35
143210 Constructing brick masonry road gully chamber
50x45x60cm with bricks of class designation 7.5 in
cement mortar 1:4 (1cement: 4 Coarse Sand )
including 500x450mm precast R.C.C. horizontal
grating with frame complete as per standard design
143211 With F.P.S. bricks Each 1945.72 0.930
45x45x77.5cm with bricks of class designation 7.5 in
cement mortar 1:4 (1cement: 4 Coarse Sand ) with
precast R.C.C. vertical grating complete as per
standard design

Cement
Qty.(qtl.)
110x50x77.5cm with bricks of class designation 7.5
in cement mortar 1:4(1cement: 4 Coarse Sand )
including 500x450mm precast R.C.C. horizontal
grating with frame and vertical grating complete as
per standard design
143240 Constructing brick masonry chamber for underground
C.I. inspection chamber and bends with 7.5 class
designation bricks in cement mortar 1:4 (1cement: 4
Coarse Sand ) C.I. cover with frame (light duty)
455x610mm internal dimensions, total weight of
cover with frame to be not less than 38kg (weight of
cover 23kg and weight of frame 15kg) R.C.C. top slab
with 1:2:4 mix (1cement: 2coarse sand: 4graded
stone aggregate 20mm nominal size) foundation
concrete 1:5:10 (1cement: 5fine sand: 10graded
stone aggregate 40mm nominal size), inside
plastering 12mm thick with cement mortar 1:3
(1cement: 3coarse sand) finished smooth with a
floating coat of neat cement on walls and bed
concrete etc. complete as per standard design
143241 Inside dimensions 455x610mm and 45cm deep for Each 2875.26 0.900
single pipe line- With F.P.S. bricks
pipe line with one or two inlets- With F.P.S. bricks
pipe line with three or more inlets- With F.P.S. bricks
143250 Extra for depth beyond 45cm of brick masonry
chamber.
143251 For 455x610mm size ( Inside dimensions) , With metre 1498.85 0.870
F.P.S. bricks
143252 For 500x700mm size (Inside dimensions), With F.P.S. metre 1633.30 0.950
bricks
143253 For 600x850mm size (Inside dimensions), With F.P.S. metre 1899.45 1.120
bricks

Cement
Qty.(qtl.)
143260 Constructing grease trap 80x40x46cm (inside) with
one brick thick brick masonry wall with inlet and
outlet drain with bricks of class designation 7.5 in
cement mortar 1:4 (1cement: 4fine sand) plastered
12mm thick with 1:4 (1cement: 4coarse sand)
finished with a floating coat of neat cement on inside
and exposed surfaces having two stone/ R C Concrete
baffled walls 34.5cm deep and third one 19cm deep,
each 40mm thick and 45cm long embedded 2.5cm on
either side in brick masonry, 40mm thick 100x60cm
stone/ R C C cover and 7.5cm thick bed concrete
1:5:10 (1cement: 5fine sand: 10graded stone
aggregate 40mm nominal size) with 40mm flooring in
4graded stone aggregate 12.5mm nominal size) with
a floating coat of neat cement including all earth
excavation, refilling and disposal of surplus earth
complete as per standard design
143270 Making soak pit 2.5m diameter 3.0m deep with
45x45cm dry brick honey comb shaft with bricks of
class designation 7.5 and S.W. drain pipes 100mm
diameter, 1.8m long complete as per standard
design, including excavation complete
143271 With F.P.S. bricks Each 11196.28
143272 Extra for every cm depth above 3.0 m as per site cm 37.32
conditions if required depth
143280 Constructing soak pit 1.20x1.20x1.20m filled with Each 1235.19
brickbats including S.W. drain pipe 100mm diameter
and 1.20m long complete as per standard design
including excavation complete
143281 Extra for every cm depth above 1.20 m as per site cm 10.29
conditions if required depth
143290 Providing and fixing S.W. intercepting trap in
manholes with stiff mixture of cement mortar 1:1
(1cement: 1fine sand) including testing of joints etc.
complete
143291 100mm dia. Each 222.25 0.200
143292 150mm dia. Each 284.81 0.300
MISCELLANEOUS
144010 Cutting holes upto 30x30cm in walls including
making good the same.(In OLD work only when
specially ordered)
144011 With F.P.S. bricks Each 92.17

Cement
Qty.(qtl.)
144020 Cutting holes upto 15x15cm in R.C.C. floors and roofs Each 95.51 0.020
for passing drain pipe etc. and repairing the hole
after insertion of drain pipe etc. with cement concrete
1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone
aggregate 20mm nominal size) including finishing
complete so as to make it leak proof.(In OLD work
only when specially ordered)
144030 Making holes upto 20x20cm and embedding pipes Each 40.43 0.010
upto 150mm diameter in masonry and filling with
cement concrete 1:2:4 (1cement: 2 coarse sand:
including disposal of malba.(In OLD work only when
specially ordered)
144040 Providing and fixing spun R.C.C. tapering vent shaft Each 4857.25
450mm (clear dia. At the base and 150/125 mm dia
at the top 9.10 metres over all length with cowl
including necessary excavation and concrete,
144050 complete, as per standard
Supplying, fitting & fixingplan
in position C.I. Jali with
frame with cement concrete 1:2:4 including all lead
144051 300 mm x 600 mm jali weighing 23 Kg Each 1794.03 0.050
144052 450 mm x 600 mm jali weighing 56 Kg Each 3555.65 0.080
144060 Supplying, fitting & fixing in position Polyelastomer
Grating & R.C.P.C. Frame with hinge arrangement
with cement conc. 1:2:4
144061 a) 12 MT load bearing capacity Polyelastomer Each 1687.58 0.001
rectangular grating with R.C.P.C. frame (Size of
grating : 450 mm x 380 mm x 50 mm thick, size of
frame : 600 mm x 550 mm x 160 mm)
144062 b) 3 MT load bearing capacity Polyelastomer Each 1311.72 0.001
grating : 380 mm x 290 mm x 25 mm thick size of
frame : 480 mm x 410 mm x 90 mm)
144063 c) 1 MT load bearing capacity Polyelastomer Each 895.24 0.001
grating : 290 mm x 210 mm x 25 mm thick size of
frame : 360 mm x 300 mm x 65 mm)
145010
145020
145030
145040

IR's Unified Standard Schedule Of Rates 2010 Chapter-15 : Sanitary Installations
CHAPTER - 15 : SANITARY INSTALLATIONS
Cement
Qty.(qtl.)
151010 Providing and fixing water closet squatting pan
(Indian type W.C. pan) with 100mm sand cast iron
P or S trap, 10litre low level white P.V.C. flushing
cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings
and fixtures complete including cutting and making
good the walls and floors wherever required
151011 White Vitreous China Orissa pattern W.C. pan of Each 2687.46 0.050
size 580x440-mm with integral type foot rests
151012 Stainless Steel AISI- 304 (18/8) Orissa pattern Each 6604.62 0.050
W.C. pan of size 585x480 mm with integrated type
foot rests
151020 Providing and fixing white vitreous china pedestal
type water closet (European type W.C. pan) with
seat and lid, 10litre low level white, P.V.C. flushing
lever) conforming to IS: 7231, with all fittings and
fixtures complete including cutting and making
good the walls and floors wherever required
151021 W.C. pan with ISI marked white solid plastic seat Each 2570.15 0.002
and lid
151022 W.C. pan with ISI marked black solid plastic seat Each 2529.50 0.002
and lid
151030 Providing and fixing white vitreous china pedestal
type water closet (European type) with seat and
lid, 10litre low level white vitreous china flushing
cistern and C.P flush bend with fittings & C.I./ M.S.
brackets, 40mm flush bend, overflow arrangement
with specials of standard make and mosquito
proof coupling of approved municipal design
complete including painting of fittings and
brackets, cutting and making good the walls and
floors wherever required
151031 W.C. pan with ISI marked white solid plastic seat Each 3688.59 0.002
and lid.
151032 W.C. pan with ISI marked black solid plastic seat Each 3647.94 0.002
and lid.
151040 Providing and fixing white vitreous china flat back
or wall corner type lipped front urinal basin of
430x260x350mm and 340x410x265mm sizes
respectively with automatic flushing cistern , with
standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps complete, including
painting of fittings and brackets, cutting and
making good the walls and floors wherever
required
151041 One urinal basin with 5litre white P.V.C. automatic Each 2386.80 0.025
flushing cistern

Cement
Qty.(qtl.)
151042 Range of two urinal basins with 10 litre white Each 4175.16 0.040
P.V.C. automatic flushing cistern
151043 Range of three urinal basins with 10litre white Each 5405.67 0.067
151044 Range of four urinal basins with 15 litre white Each 7144.63 0.095
151050 Providing and fixing white, vitreous china flat back
half stall urinal of 580x380x350mm with white
P.V.C. automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste
fitting as per IS: 2556, C.I. trap with outlet grating
and other coupling in C.P. brass including painting
of fittings and cutting and making good the walls
and floors wherever required
151051 Single half stall urinal with 5litre P.V.C. automatic Each 4132.23 0.051
flushing cistern
151052 Range of two half stall urinals with 5litre P.V.C. Each 6412.39 0.102
automatic flushing cistern
151053 Range of three half stall urinals with 10litre P.V.C. Each 8938.40 0.153
151054 Range of four half stall urinals with 10litre P.V.C. Each 10902.28 0.203
151060 Providing and fixing one piece construction white
vitreous china squatting plate with an integral
longitudinal flushing pipe, white, P.V.C. automatic
flushing cistern, with fittings, standard size G.I.
flush pipe for back and front flush with standard
spreader pipes with fittings, G.I. clamps and C.P.
brass coupling complete including painting of
fittings and cutting and making good the walls and
floors etc. wherever required
151061 Single squatting plate of 600x350 mm size with 5 Each 3462.24 0.051
litre P.V.C. automatic flushing cistern
151062 Range of two squatting plates with 5litre P.V.C. Each 4937.28 0.102
151063 Range of three squatting plates with 10litre P.V.C. Each 6473.89 0.153
151064 Range of four squatting plates with 10litre P.V.C. Each 7667.51 0.203
151070 Providing and fixing wash basin with C.I./ M.S.
brackets, 15mm C.P. brass pillar taps, 32mm C.P.
brass waste of standard pattern, including painting
of fittings and brackets, cutting and making good
the walls wherever required
151071 white, vitreous china wash basin size 630x450mm Each 1736.27 0.015
with a pair of 15mm C.P. brass pillar taps
151072 white vitreous china wash basin size 630x450mm Each 1500.37 0.015
with a single 15mm C.P. brass pillar taps
151073 white vitreous china wash basin size 550x400mm Each 1489.45 0.015
with a pair of 15mm C.P. brass pillar taps

Cement
Qty.(qtl.)
151074 white vitreous china flat back wash basin size Each 1253.55 0.015
550x400mm with single 15mm C.P. brass pillar tap
151075 white vitreous china angle back wash basin size Each 1507.63 0.015
151076 white vitreous china angle back wash basin size Each 1227.42 0.015
151077 white, vitreous china flat back wash basin size Each 1224.52 0.015
151078 white, vitreous china surgeon type wash basin of Each 2743.87 0.015
size 660x460mm with a pair of 15mm C.P. brass
pillar taps with elbow operated levers
151079 white, vitreous china flat back wash basin size Each 1398.74 0.015
520X520 mm corner type with single 15mm C.P.
brass pillar tap
151080 Providing and fixing special type wash basin with 0.015
C.I./ M.S. brackets, 15mm C.P. brass pillar taps,
32mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting
and making good the walls wherever required
151081 White, vitreous china Surgeon type wash basin of Each 2229.21 0.015
size 660x460mm with single 15mm C.P. brass
pillar taps with elbow operated levers ISI marked
151082 Stainless Steel AISI- 304 (18/8) Round basin Each 2763.50 0.015
151083 Stainless Steel AISI- 304 (18/8) wash basin Each 2531.20 0.015
151090 EXTRA for :
151091 Providing 32mm dia. C.P. brass trap Each 197.46
151092 Providing 32mm dia. C.P. brass union Each 102.60
151100 Supplying and fixing white vitreous china circular Each 1560.63 0.015
wash basin category No. 1004 group I, size 470
mm. dia with CP brass pillar tap, 32 mm. rubber
plug and CP brass chain, 32 mm. CP brass waste of
standard pattern connected with GI waste pipe
upto floor level and 32 mm. dia CP brass trap and
unions complete including cutting and making
good the walls etc. as a complete job
151110 Providing and fixing white, vitreous china pedestal Each 971.52 0.010
for wash basin completely recessed at the back for
the reception of pipes and fittings
151120 Providing and fixing white, vitreous china water
closet squatting pan (Indian type)
151121 Long pattern W.C. pan of size 580mm Each 687.07 0.051
151122 Orissa pattern W.C. pan of size 580x440mm Each 1189.41 0.051
151130 Extra for using coloured W.C. pan instead of white,
W.C. pan
151131 Orissa pattern W.C. pan 580x440mm or of any Each 405.56
other size
151132 Long pan pattern W.C. pan Each 354.26

Cement
Qty.(qtl.)
151140 Providing and fixing white, vitreous china pedestal Each 980.37
European type water closet pan
151150 Extra for using coloured pedestal type W.C. pan Each 744.13
(European type) with low level cistern of same
colour instead of white, vitreous china W.C. pan
and cistern
151160 Providing and fixing a pair of white, vitreous china
foot rests of standard pattern for squatting pan
water closet or in urinals
151161 250x130x30mm pair 205.06 0.025
151162 250x125x25mm pair 125.31 0.025
151170 Providing and fixing a pair of approved colour,
vitreous china foot rests of standard pattern, for
squatting pan water closet or in urinals
151171 250x130x30mm pair 146.99 0.025
151172 250x125x25mm pair 144.08 0.025
151180 Providing and fixing P.V.C. low level flushing
lever) conforming to IS: 7231, with all fittings and
fixtures complete
151181 10 litre capacity- white pair 794.61 0.010
151182 10 litre capacity- Coloured pair 833.33 0.010
151190 Providing and fixing controlled flush, low level
cistern made of vitreous china conforming to IS:
7231, with all fittings complete
151191 10 litre (full flush) capacity- White Each 1474.91 0.020
151192 10 litre (full flush) capacity- Coloured Each 1989.84 0.020
151200 Providing and fixing 5 litres C.I. automatic flushing Each 740.65 0.015
cistern with fittings
151210 Providing and fixing 10 litres C.I. automatic Each 1089.10 0.015
flushing cistern with fittings
151220 Providing and fixing solid plastic seat with lid for
pedestal type W.C. pan complete
151221 White, solid plastic seat with lid Each 459.95
151222 Black solid plastic seat with lid Each 419.30
151230 Extra for providing coloured other than black solid Each 25.40
P.V.C. plastic seat and cover in European type
W.C. pan, instead of white, plastic seat and cover
151240 Providing and fixing standard G.I. chain with G.I. Each 34.33
pull
151250 Providing and fixing G.I. inlet connection for flush Each 91.18 0.001
pipe connecting with W.C. pan
151260 Providing and fixing white, vitreous china flat back Each 651.53 0.020
or wall corner type lipped front urinal basin of
430x260x350mm and 340x410x265mm sizes
respectively
151270 Providing and fixing white, vitreous china squatting Each 1112.21 0.020
plate urinal with integral longitudinal flush pipe

Cement
Qty.(qtl.)
151280 Providing and fixing white, vitreous china wash
basin, including making all connections but
excluding the cost of fittings
151281 Flat back wash basin of size 630x450mm Each 832.01 0.015
151283 Angle back wash basin of size 600x480mm Each 839.27 0.015
151284 Angle back wash basin of size 400x400mm Each 559.05 0.015
151286 Surgeon type wash basin of size 660x460mm Each 1282.09 0.015
151290 Providing and fixing white, glazed fire clay kitchen Each 1719.52
sink of size 600x450x250mm including making all
connections excluding cost of fittings
151300 Providing and fixing vitreous china dual purpose Each 4564.03 0.050
closet suitable for use as squatting pan or
European type water closet (Anglo Indian W.C.
pan) with seat lid with C.P. brass hinges and
rubber buffers, 10litre low level flushing cistern
with fittings and brackets, 40mm flush bend 20mm
overflow pipe with specials of standard make and
mosquito proof coupling of approved municipal
design complete including painting of fittings and
brackets, cutting and making good the walls and
floors wherever required
SINK
152010 Providing and fixing white, glazed fire clay kitchen Each 2211.74 0.015
sink of size 600x450x250mm kitchen sink with
C.I. brackets, C.P. brass chain with rubber plug,
40mm C.P. brass waste compete, including
painting the fittings and brackets, cutting and
making good the walls wherever required
152020 Providing and fixing Stainless Steel AISI- 304
(18/8) kitchen sink with drain board as per IS:
13983 with C.I. brackets and stainless steel plug
40mm including painting of fittings and brackets,
cutting and making good the walls wherever
required
152021 510x1040 mm bowl depth 250mm Each 5439.39 0.015
152024 510X1040 mm bowl depth 178mm Each 3697.14 0.015
152030 Providing and fixing Stainless Steel AISI- 304

(18/8) kitchen sink without drain board as per IS:
13983 with C.I. brackets and stainless steel plug
40mm including painting of fittings and brackets,
cutting and making good the walls wherever
required
152031 610x510mm bowl depth 200mm Each 3524.92 0.015
152032 610x460mm bowl depth 200mm Each 3176.47 0.015

Cement
Qty.(qtl.)
152033 470X420mm bowl depth 178mm Each 2311.16 0.015
152040 Providing and fixing white, vitreous china
laboratory sink with C.I. brackets, C.P. brass chain
with rubber plug 40mm C.P. brass waste and
40mm C.P. brass trap with necessary C.P. brass
unions complete including painting of fittings and
brackets, cutting and making good the wall
wherever required
152041 Size 450x300x150mm Each 2280.52 0.015
152042 Size 600x450x200mm Each 3976.31 0.015
152050 Providing and fixing white, glazed fire clay draining Each 750.89 0.030
board of size 600x450x25mm with C.I./ M.S.
brackets including painting of brackets, cutting and
making good the walls wherever required
152060 Providing and fixing 75cm X 40cm X 4cm vitreous Each 891.23 0.030
china draining board for sink supported on painted
R.S or C.I brackets, complete including cutting and
making good the wall
152070 Providing and fixing white, vitreous china
laboratory sink, including making all connections
excluding the cost of fittings
152071 Size 450x300x150mm Each 1324.61 0.030
152072 Size 600x450x200mm Each 3020.40 0.030
152080 Providing and fixing P.V.C. waste pipe for sink or
wash basin including P.V.C. waste fittings complete
152081 Semi rigid pipe 32mm dia. Each 50.33
152082 Flexible pipe 32mm dia. Each 69.30
152083 Semi rigid pipe40mm dia. Each 71.43
152084 Flexible pipe 40mm dia. Each 80.14

152090 Providing and fixing 100mm sand cast iron grating Each 80.79
for gully, trap
152100 Providing and fixing in position 25mm diameter Each 35.89
mosquito proof coupling of approved municipal
design
152110 Providing and fixing 600x450mm bevelled edge Each 537.62
mirror , 5.5 mm thick of float glass (of approved
quality) complete with 6mm thick hard board
ground fixed to wooden cleats with C.P. brass
screws and washers complete
152120 Providing and fixing mirror of 5.5 mm thickness of
float Glass (of approved Quality) required shape
and size with plastic moulded frame of approved
make and shade with 6mm thick hard board
backing
152121 Circular shape 450mm dia. (outer dimension) Each 684.89
152122 Rectangular shape 453x357mm (outer dimension) Each 706.75
152123 Oval shape 450x350mm (outer dimension) Each 636.66

Cement
Qty.(qtl.)
152124 Rectangular shape 1500x450 (outer dimension) Each 1723.67
152130 Providing and fixing 600x120x5mm glass shelf Each 403.41

with edges round or supported on anodised
aluminium angle frame with C.P. brass brackets
and guard rail complete fixed with 40mm long
screws, rawl plugs etc. complete
152140 Providing and fixing toilet paper holder
152141 C.P. brass Each 269.75
152142 Vitreous china Each 354.15
SANITARY FITTINGS
Note : Sand cast iron S&S pipes shall not be used
except for minor work or due to non availability of
centrifugally cast (spun) iron S&S pipe.
153010 Providing and fixing soil, waste and vent pipes
153011 100mm dia. Sand cast iron S&S pipe as per metre 586.83 0.005
IS:1729
153012 100mm dia. Centrifugally cast (spun) iron S&S metre 602.05 0.005
pipe as per IS:3989
153013 75mm dia. Sand cast iron S&S pipe as per IS:1729 metre 583.30 0.004
153014 75mm dia. Centrifugally cast (spun) iron S&S pipe metre 514.41 0.004
as per IS:3989
153020 Providing and filling the joints with spun yarn
cement slurry and cement mortar 1:2 (1cement:
2fine sand) in S.C.I./ C.I. pipes
153021 75mm dia pipe Each 31.89 0.001
153022 100mm dia pipe Each 37.55 0.001
153030 Providing and fixing M.S. holder-bat clamps of
approved design to sand cast iron/ cast iron (spun)
pipe embedded in and including cement concrete
blocks 10x10x10cm of 1:2:4 mix (1cement:
nominal size) including cost of cutting holes and
making good the walls etc.
153031 For 100mm dia pipe Each 89.09 0.005
153032 For 75mm dia pipe Each 85.03 0.005
153040 Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick,
bolts and nuts complete
153041 100mm dia. Sand cast iron S&S as per IS-1729 Each 365.72
153050 Providing and fixing plain bend of required degree

Cement
Qty.(qtl.)
153060 Providing and fixing heel rest sanitary bend
153070 Providing and fixing double equal junction of

required degree with access door, insertion rubber
washers 3mm thick, bolts and nuts complete
153071 100x100x100x100mm sand cast iron S&S as per Each 670.42
IS-1729
153072 100x100x100x100mm Sand cast iron S&S as per Each 629.77
IS-3989
153073 75x75x75x75mm sand cast iron S&S as per IS- Each 589.02
1729
153074 75x75x75x75mm Sand cast iron S&S as per IS- Each 530.07
3989
153080 Providing and fixing double equal plain junction of
required degree
IS-1729
IS-3989
1729
3989
153090 Providing and fixing single equal plain junction of
wash 3mm thick, bolts and nuts complete
153091 100x100x100mm sand cast iron S&S as per IS- Each 581.85
1729
153092 100x100x100mm Sand cast iron S&S as per IS- Each 549.62
3989
153093 75x75x75mm sand cast iron S&S as per IS-1729 Each 425.53
153094 75x75x75mm Sand cast iron S&S as per IS-3989 Each 405.79
153100 Providing and fixing single equal plain junction of

required degree
1729
3989

Cement
Qty.(qtl.)
153110 Providing and fixing double unequal junction of

washers 3mm thick, bolts and nuts complete
1729
3989
153120 Providing and fixing double unequal plain junction
of required degree
3989
1729
153130 Providing and fixing single unequal junction of
required degree with access door insertion washer
3mm thick, bolts and nuts complete
3989
153140 Providing and fixing single unequal plain junction
of required degree
3989
153150 Providing and fixing double equal plain invert
branch of required degree
IS-1729
IS-3989
1729
3989
153160 Providing and fixing single equal plain invert
1729
3989
153170 Providing and fixing double unequal invert branch

of required degree
1729

Cement
Qty.(qtl.)
3989
153180 Providing and fixing single unequal plain invert
3989
153190 Providing and fixing sand cast iron S&S off sets as
per IS-1729
153191 76mm off sets with 75mm dia pipe Each 323.36
153195 152mm off set with 75mm dia pipe Each 341.39
153200 Providing and fixing Sand cast iron S&S off sets as
per IS-3989
153203 150 mm off sets with 100mm dia pipe Each 723.68
153210 Providing and fixing door piece, insertion rubber

washer 3mm thick, bolts and nuts complete
153211 100mm Sand cast iron S&S as per IS-1729 Each 492.13
153216 50 mm Sand cast iron S&S as per IS-3989 Each 114.70
153220 Providing and fixing terminal guard
153226 50 mm Sand cast iron S&S as per IS-3989 Each 116.34
153230 Supplying, fitting and fixing cowls to vent pipes :
153231 Wire cowls for pipes of size 50/75 mm dia. Each 88.85
153232 Wire cowls for pipes of size 100/150 mm dia. Each 122.25
153240 Providing and fixing collar

Cement
Qty.(qtl.)
153242 100mm Centrifugally cast (spun) iron S&S as per Each 247.05
IS-3989
153244 75mm Centrifugally cast (spun) iron S&S as per IS- Each 216.79
3989
153246 50 mm Centrifugally cast (spun) iron S&S as per Each 138.68
IS-3989
153250 Providing lead caulked joints to sand cast iron/
centrifugally cast (spun) iron pipes and fittings of
diameter
153251 100mm Each 220.42
153252 75mm Each 190.67
153253 50mm Each 157.45
153260 Providing and fixing M.S. stays and clamps for
sand cast iron/ centrifugally cast (spun) iron pipes
of diameter
153261 100mm Each 65.47
153262 75mm Each 56.60
153263 50mm Each 48.11
153270 Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or
without vent arm complete including cost of
cutting and making good the walls and floors
153271 100mm inlet and 100mm outlet Sand cast iron Each 731.59 0.025
S&S as per IS: 3989
153272 100mm inlet and 100mm outlet sand cast iron S&S Each 518.65 0.025
as per IS:1729
153273 100mm inlet and 75mm outlet Sand cast iron S&S Each 766.44 0.025
as per IS: 3989
153274 100mm inlet and 75mm outlet sand cast iron S&S Each 443.15 0.025
as per IS:1729
153280 Providing and fixing Poly Tetra Methylene
Terephthalate (PTMT) Waste Coupling for wash
basin and sink, of approved quality, colour and
make
153281 Waste coupling 31mm of 79mm length and 62mm Each 69.47
breadth weighing not less than 45gms
153282 Waste coupling 38mm of 83mm length and 77mm Each 97.34
breadth, weighing not less than 60gms
153290 Providing and fixing PTMT Bottle Trap for Wash
basin and sink
153291 Bottle trap 31mm single piece moulded with height Each 416.98
of 270mm, effective length of tail pipe 250mm
from the centre of the waste coupling 77mm
breadth with 25mm minimum water seal, weighing
not less than 270gms

Cement
Qty.(qtl.)
153292 Bottle trap 38mm single piece moulded with height Each 458.60
of 270mm, effective length of tail pipe 265mm
from the centre of the waste coupling 77mm
breadth with 25mm minimum water seal, weighing
not less than 270gms
153300 Providing and fixing PTMT liquid soap container Each 188.16
109mm wide, 125mm high and 112mm distance
from wall of standard shape with bracket of the
same materials/ with snap fittings of approved
quality colour and make, weighing not less than
105gms
153310 Providing and fixing PTMT towel ring trapezoidal Each 170.35
shape 215mm long, 200mm width with a minimum
distance of 37mm from wall face with concealed
fittings arrangement of approved quality, colour
and make weighing not less than 90gms
153320 Providing and fixing PTMT towel rail complete with
brackets fixed to wooden cleats with C.P. brass
screws with concealed fitting arrangement of
approved quality colour and make
153321 450mm long towel rail with total length of 495mm, Each 338.03
78mm wide and effective height of 88mm,
weighing not less than 170gms
153322 600mm long towel rail with total length of 645mm, Each 373.65
width 78mm and effective height of 88mm,
weighing not less than 190gms
153330 Providing and fixing PTMT shelf 440mm long, Each 414.69
124mm width and 36mm height of approved
quality, colour and make weighing not less than
300gms
153340 Providing and fixing PTMT 15mm Urinal spreader Each 158.89
size 95x69x100mm with ½ Inch BSP thread and
shapes as per BIS specifications, weighing not less
than 60gms
153350 Providing and fixing PTMT urinal cock 15mm Each 121.61
nominal size 80mm long, 42mm high and 30mm
wide with BSP female threads weighing not less
than 48 gms. of approved quality, colour and make
153360 Providing and fixing PTMT shower rose of approved Each 102.25
quality with 15mm or 20mm inlet. 100mm dia.
153370 Providing and fixing PTMT shower rose of approved Each 157.42
quality with 15mm or 20mm inlet. 150 mm dia.
153380 Providing and fixing C P brass Soap dish holder Each 154.94
having length of 138 mm, 102 mm wide, 75 mm
high with concealed fittings arrangements
weighing approx. 110 gms
153390 Providing and fixing Shower rose (C.P.) brass with Each 340.31
swivel joint having aprox. wt. 270 gm
153400 Providing and fixing Towel rail (C.P.) brass 15 mm Each 287.04
dia x 450 mm long having approx. wt. 380 gm

Cement
Qty.(qtl.)
153410 Providing and fixing Towel rail (C.P.)brass15 mm Each 322.66
dia x 600 mm long having approx. wt.500 gm
153420 Providing and fixing C P brass Towel ring in Each 186.24
trapezoidal shape having length of 215 mm, width
200 mm, minimum distance from wall 37 mm with
concealed fittings arrangements weighing approx.
90 gms
153430 Providing and fixing C P brass Shelf of 450 mm Each 642.32
length complete with glass, 124 mm width & 36
mm ht. having approx. wt. 300 gms (Without
Glass)
153440 Providing and fixing C P brass Bottle trap 31 mm, Each 430.50
single piece moulded of ht. 270 mm, effective
length of tall pipe from centre of waste coupling
260 mm, 77 mm breadth water seal of minimum
25 mm, weighing approx. 260 gms
153450 Providing and fixing C P brass Shower arm 15 mm Each 304.63
size with 15 mm (1/2") B.S.P. threads, 195 mm
long with a bend of 45 (effective length of 210
mm) provided with a flange of 56 mm dia and
having approx. wt. of 40 gms
153460 Providing and fixing C P brass Swivelling shower Each 269.78
15 mm nominal size, 95 mm long, 60 mm dia. &
having approx. wt. of 45 gms with approx. 90
holes of 1.2 mm dia.
153470 Providing and fixing C P brass grating with
openable lid :
153471 Grating 100 mm nominal dia. and 12 mm. high Each 101.48
domed shape having wt. not less than 25 gms
153472 Grating 125 mm nominal dia. and 15 mm. high Each 123.94
domed shape having wt. not less than 40 gms
153480 Providing and fixing C P Brass :
153481 Grating 150 mm. nominal size square ,18 mm high Each 151.04
with 100 mm dia. of the inner hinged round
grating dome shape having Total wt. not less than
110 gms
153482 Grating square slit type 150 mm square with 8 mm Each 114.07
high & approx. Total wt. of 100 gms
153490 Providing and fixing PVC connector 15 mm size
with non corrosive PTMT couplings in both ends
153491 15mm dia 300mm long Each 48.18
153500 Providing and fixing Swan neck pillar tap (C.P. Each 476.55
Brass) 15 mm dia. with swinging spout having
approx. wt. 1000 gms
153510 Providing and fixing Telephonic shower (C.P. Each 366.43
Brass) 100 mm dia with flexible PVC tube 1.5m
long including C.P. hook
153520 Providing and fixing Shower arm (C.P. Brass) 15 Each 145.76
mm dia. x 225 mm long

Cement
Qty.(qtl.)
153530 Providing and fixing Basin/sink waste (C.P. Brass)
coupling with chain and stopper complete
153531 a) Waste 32 mm Each 113.23
153532 b) Waste 40 mm Each 139.36
153540 Providing and fixing Liquid soap container (C.P. Each 196.37
Brass) having approx wt. 240 gms
153550 Providing and fixing Toilet paper holder (C.P. Each 208.37
Brass) having approx. wt. 250 gm
153560 Providing and fixing Coat hook "J" type two way Each 87.43
(C.P.Brass)
153570 Providing and fixing Soap dish (C.P. Brass) having Each 150.53
approx. wt. 220 gm
153580 Supplying and fixing half round white glazed metre 81.06 0.003
earthen ware drains 100 mm dia with cement
sand mortar 1:3 mix and joints grouted with neat
cement slurry of the matching colour :
153590 Supplying and fixing half round white glazed metre 100.67 0.002
earthen ware drains 150 mm dia with cement sand
mortar 1:3 mix and joints grouted with neat
cement slurry of the matching colour
153600 Extra if coloured half round drains are provided in metre 20.41
lieu of white glazed half round drains with cement
sand mortar 1:3 mix and joints grouted with neat
cement slurry of the matching colour over item
153580 & 153590
153610 Providing and fixing 20mm diameter puff pipe, Each 149.87
complete with brass perforated cap
153620 Providing and fixing 25mm diameter puff pipe, Each 158.00
complete with brass perforated cap
153630 Providing and fixing S.C.I. trap with 10 cm inlet Each 425.73
and 10 cm outlet of self cleansing design with
S.C.I. screwed down or hinged grating with or
without vent arm complete, including cost of
cutting and making good the walls and floors
153640 Providing and fixing 10 cm inlet and 5 cm outlet Each 425.73
S.C.I. floor trap of self cleansing design with S.C.I.
screwed down or hinged grating with or without
vent arm complete, including cost of cutting and
making good the walls and floors
PVC PIPES AND FITTINGS
154010 Providing and fixing 110mm dia PVC soil, waste metre 226.92
and vent pipes including jointing and cost of spun
yarn and sand etc. complete
154020 Providing and fixing brackets comprising of Each 77.71
aluminium painted standard steel clip and cast iron
base for 110mm A.C. pipes, including cost of
screws etc. and drilling of holes and making good
the walls including cost of sand etc. complete

Cement
Qty.(qtl.)
154030 Providing and fixing 110 mm x 110 mm x 110mm Each 117.00
dia PVC plain branch (single equal junction)of the
required degree including jointing and cost of spun
yarn and sand etc., complete
dia PVC plain branch (single equal junction)of the
required degree with access door inclusive of 3mm
thick bitumastic felt washer and bolts and nuts,
complete, including jointing and the cost of spun
x 110 mm PVC plain branch (double equal
junction)of the required degree including jointing
and cost of spun yarn and sand etc., complete
dia PVC plain branch (double equal junction) of the
complete, including jointing and cost of spun yarn
and sand etc., complete
PVC plain branch (single unequal junction) of the
154080 Providing and fixing 110 mm x 110 mm x 5mm x 5 Each 174.82
mm PVC branch double unequal junction)of the
complete, including jointing and the cost of spun
154090 Providing and fixing 110 mm PVC offset including
jointing and cost of spun yarn and sand etc.,
complete :
154091 (a) With 10 cm projection Each 175.07
154092 (b) With 15 cm projection Each 186.69
154093 (c) With 30 cm projection Each 186.69
154100 Providing and fixing 110 mm PVC Plain bend of the Each 83.35
thick bitumastic felt washer, bolts and nuts,
and sand etc. complete
154110 Providing and fixing 110 mm PVC bend of the Each 83.35
thick bitumastic felt washer, bolts and nuts,
154120 Providing and fixing 110mm dia PVC terminal Each 269.08
guard including jointing and cost of spun yarn and
sand etc, complete

Cement
Qty.(qtl.)
154130 Providing and fixing 110 mm PVC collar (loose Each 76.27
socket) including jointing and cost of spun yarn
154140 Providing and fixing 75 mm PVC soil, waste and metre 134.53
vent pipes including jointing and cost of spun yarn
154150 Providing and fixing brackets comprising of Each 67.21
aluminium painted steel clips and cast iron base
for 75 mm PVC pipes including cost of screws etc.
and drilling of holes and making good the walls,
including cost of sand etc. complete
154160 Providing and fixing 75mm x 75 mm x 75 mm PVC Each 117.70
plain branch (single equal junction)of the required
degree including jointing and the cost of spun yarn
154170 Providing and fixing 75mm x 75 mm x 75mm dia Each 124.90
PVC branch (single equal junction) of the required
degree with access door inclusive of 3mm thick
bitumastic felt washer including jointing and cost
of spun yarn and sand etc., complete
154180 Providing and fixing 75 mm x 75 mm x 75mm x 75 Each 117.00
mm PVC plain branch (double equal junction) of
the required degree including jointing and cost of
spun yarn and sand etc., complete
154190 Providing and fixing 75 mm x 75 mm x 75 mm x Each 129.23
75 mm PVC plain branch (double equal junction) of
the required degree with access door inclusive of
3mm thick bitumastic felt washer and bolts and
nuts, complete, including jointing and cost of spun
154200 Providing and fixing 75 mm dia PVC offset
including jointing and cost of spun yarn and sand
etc., complete :
154201 With 5 cm projection Each 117.00
154210 Providing and fixing 8cm dia PVC Plain bend of the Each 163.46
required degree including jointing and cost of spun
yarn and sand etc. complete
154220 Providing and fixing 8 cm PVC bend of the required Each 201.24
degree with access door inclusive of 3mm thick
bitumastic felt washer, bolts and nuts, complete,
etc. complete
154230 Providing and fixing 75mm dia PVC terminal guard Each 79.09
etc, complete
154240 Providing and fixing 75 mm PVC collar (loose Each 48.12
socket) including jointing and cost of spun yarn
LEAD PIPES

Cement
Qty.(qtl.)
155010 Providing and fixing 32mm diameter lead pipe metre 299.38
155020 Providing wiped solder joint to 32mm dia, lead Each 295.98
pipe and fittings including cost of jointing materials
155030 providing and fixing with porcelain / white Each 329.45
vitreous china /coloured interconnection for flush
pipe connection with WC pan (for low down
155040 cistern)
Supplying 32 mm dia telescopic plastic flush pipe Each 107.28
with unions etc.
155050 Supplying and fixing marble stone 20 to 25 mm
thick in masonry or concrete as a purdha to urinal
range etc. Stone to be machine cut and well
polished on all faces and the edges to be moulded
by semi circular rounding & polishing. Marble shall
be any one of the following :
155051 Makrana chalk doongri Sqm 1515.83
155052 Makrana Dhobi doongri Sqm 1542.94
155053 Black Zebra Kishangarh Sqm 1260.30
155054 Bundi or Baroda green marble Sqm 1318.38
155060 Supplying and fixing pipe as outlet or waste pipe
to wash basins sink and bowl type urinals etc.
complete including providing clamps to hold the
pipe, making holes in masonry and making it good
to original condition when not included in the item
155061 50 mm bore (2.90 mm thick and 4.18 Kg/metre metre 295.40
weight minimum) M.S. galvanized for bowl urinals
and sinks, etc.
155062 32 mm bore ( 2.65 mm thick and 2.61 Kg/metre metre 185.49
weight minimum) M.S. galvanized for wash basin
etc.
155063 PVC 50 mm bore 1.7 mm thick metre 126.20
155064 PVC 32 mm bore 1.4 mm thick metre 93.58
155070 Supplying and fixing granite stone superior quality Sqm 3587.73 0.050
black 20 to 25mm thick in masonry or concrete as
a Purdah to urinal range etc. stone to be machine
cut & well polished on all faces and the edges to be
moulded by semi-circular rounding and polishing.
NOTE : The following percentage is to be added /
deducted incase of granites other than superior
quality black. i) For superior quality Red like “RBI”
red add 15% extra ii) For pink coloured granite
deduct 25% iii) For gray coloured granite deduct
18%
155080 Supplying and fixing cast iron brackets in walls for Pair 135.16 0.020
fixing flushing cistern, including making holes in
masonry and making good the surface to its
original condition. (When ordered separately)
155090 Providing and fixing aluminium drain boards 600 x Each 679.03 0.030
450 mm
155100 Providing and fixing Aluminium anodized towel
rails with brackets
155101 a) 750 x 20 mm dia Each 333.48
155102 b) 600 x 20 mm dia Each 287.02

Cement
Qty.(qtl.)
155110 Providing and fixing brass robe hook swinging type Each 102.15
with 3 hooks as approved by Engineer-in-charge
155120 Providing and fixing air purifier container of Each 88.60
anodized aluminium with brackets
155130 Providing and fixing self-closing taps of 15 mm
nominal size of :
155131 Cast iron Each 65.43
155132 Malleable iron casting Each 46.85
155140 Providing and fixing Chromium plated brass waste
plug for glazed ware sinks, basins, etc. with long
screwed shank and fly nut, and fixed to
unplasticised pipe, including vulcanite rubber plug,
brass chain and stud, complete, of nominal bore :
155141 32 mm Each 66.44
155142 40 mm Each 94.97
155143 50 mm Each 79.49
155150 Providing and fixing rubber or vulcanite waste plug
with ring, including chromium plated brass chain,
not exceeding 50 cm. In length, and stay, for
nominal bore :
155151 32 mm Each 63.61
155152 40 mm Each 72.61
155153 50 mm Each 81.03
155160 Supplying fitting and fixing float valve for cisterns
complete with polythene ball
155161 15 mm dia set Each 239.40
155162 20mm dia set Each 262.63
155170 Providing and fixing Towel ring (C.P.) of approved Each 180.21
make 170 mm dia having approx. weight 490 gm
155180 Providing and fixing Connector (C.P.) with coupling Each 162.20
15 mm x 450 mm long
155190 Providing and fixing Connector (C.P.) with coupling Each 199.95
15 mm x 600 mm long
155200 Providing and fixing Flush valve (C.P.) 25 mm with Each 276.20
25 mm size control cock having approx. wieght
2.75 kg conforming to I.S. 9758:1981
155210 Providing and fixing Flush valve (C.P.) 32 mm with Each 429.71
elbow set ISI marked (IS : 9758 : 1981)
155220 Providing and fixing Glass Shelf of approved make Each 568.71
or equivalent of size 550 mm x 130 mm x 5.5 mm
thick (rounded end) with C.P. brass brackets &
guard rails having approx. wt.2.4 kg
155230 Supplying fitting and fixing soap tray of Each 212.68
size150x150mm vitreous (concealed type) with all
necessary fittings etc. completed as directed by
the Engineer-incharge
155240 Supplying and fixing approved quality chromium Each 86.74
plated shirt hooks (One unit of 4 hooks) with all
necessary fittings etc. complete and as directed by
the Engineer-in-charge
155250 P&F 127mm dia C.P. steel Jali cockroach trap Each 217.80
(CCTR-127) for gully floor or Nahani trap

Cement
Qty.(qtl.)
155260 Supplying and fixing 150 mmx150mm HCI / CI Tee Each 453.68
for septic tank as a complete job
MISCELLANEOUS
156010 Cutting chases in brick masonry walls for following

diameter sand cast iron/ centrifugally cast (spun)
iron or any other types of pipes and making good
the same with cement concrete 1:3:6 (1cement:
3coarse sand: 6graded stone aggregate 12.5mm
nominal size) including necessary plaster and
pointing in cement mortar 1:4 (1cement: 4coarse
sand)
156011 100mm dia. metre 132.96 0.005
156012 75mm dia. metre 95.33 0.004
156013 50mm dia. metre 62.10 0.002
156020 Painting two or more coats, C.I. cistern with Each 283.23
bitumastic or any other anti-corrosive paint inside
and white/approved colour , paint over a coat of
zinc chromate yellow primer (of approved quality)
on the outside surface of the cistern, flush pipe,
other fittings etc. to give an even shade complete
for new work
156030 Re-painting one or more coats ,C.I. cistern with Each 182.67
bitumastic or any other anti-corrosive paint inside
and white/approved colour, paint on the outside
surface of the cistern, flush pipe, other fittings etc.
complete including polishing of wooden seat and
lid to give an even shade and cleaning of W.C. pan
with acid wherever necessary
156040 Re-painting C.I. one or more coats, cistern with Each 85.77
synthetic enamel paint of approved colour brand
and manufacture on the outside surface of cistern
flush pipe, other fittings etc. to give an even shade
complete
156050 Painting two or more coats on , sand cast iron/
centrifugally cast (spun) iron soil, waste vent pipes
and fittings with paint of any colour such as
chocolate, grey or buff etc. over a coat of primer
(of approved quality) to give an even shade for
new work
156052 Upto 75mm diameter pipe metre 17.35

156060 Re-painting one or more coats sand cast iron/
centrifugally cast iron (spun) iron, soil, waste, vent
pipes and fittings to give an even shade with paint
of any colour such as chocolate, grey or buff etc.
156062 Upto 75mm diameter pipe metre 8.38

Cement
Qty.(qtl.)
156070 Repainting bath tub of size 1700x730x430mm (or Each 257.38
of any other size ) with enamel paint one or more
coats to give an even shade

157010
157020
157030
157040
157050
157060
157070
157080
157090
157100

IR's Unified Standard Schedule Of Rates 2010 Chapter-16 : Horticulture And Landscaping
CHAPTER - 16 : HORTICULTURE AND LANDSCAPING

161010 Trenching in ordinary soil upto a depth of 60cm including cum 69.20
removal and stacking of un-serviceable materials and then
disposing of by spreading and neatly leveling with in a lead of
50m and making up the trenched area to proper levels by filling
with earth or earth mixed with sludge or/ and manure before
and after flooding trench with water (excluding cost of imported
earth, sludge or manure). (Additional lead, if any will be paid
as per rates in the Earth work Chapter)
161020 Supplying and stacking of good earth at site including royalty cum 276.11
(earth measured in stacks will be reduced by 20% for payment)
161030 Supplying and stacking sludge at site in dry caked form from cum 278.76
approved disposal works including royalty & all lead and lift etc.
(sludge measured in stacks will be reduced by 8% for payment)
161040 Supplying and stacking at site dump manure / farm manure /
animal dung manure from approved source; including all lead
and lift etc. (manure measured in stacks will be reduced by 8%
for payment)
161041 Screened through sieve of I.S. designation 20mm cum 103.65
161042 Screened through sieve of I.S. designation 4.75mm cum 121.53
161060 Rough dressing the trenched ground including breaking clods 100 Sqm 41.38
161070 Uprooting weeds from the trenched area after 10 to 15days of 100 Sqm 128.51
its flooding with water including disposal of uprooted vegetation
161080 Fine dressing the ground 100 Sqm 100.97
161090 Spreading of sludge, dump manure/ farm manure/animal dung 100 Sqm 14.51
manure and good earth in required thickness (cost of sludge,
dump manure/farm manure or/ and good earth to be paid
separately)
161100 Mixing earth and sludge or manure in proportion specified or cum 9.50
directed. (Net total quantity of earth, sludge or manure after
deduction of voids to be cosidered for payment)
161110 Supplying & Grassing with grass in rows 7.5cm apart in either
direction including watering and maintenance of the lawn for 30
days or more till the grass forms a thick lawn free from weeds
and fit for mowing including supplying good earth if needed (the
good earth shall be paid for separately)
161111 Doob Grass 100 Sqm 294.37
161112 Calcutta Grass 100 Sqm 317.60
161113 Mexican Grass 100 Sqm 340.83
161114 Korean carpet grass 100 Sqm 358.25
161115 Selection No.1 (Grass) 100 Sqm 286.24
161116 Extra over item 161110 for grassing in rows at 5cm apart 100 Sqm 201.46
instead of 7.50 cm apart in either direction
161120 Renovating lawns including weeding, cheeling the grass, forking 100 Sqm 901.82
the ground, top dressing with sludge or manure, mixing the
same with forked soil, watering and maintaining the lawn for 30
days or more till the grass forms a thick lawn free from weeds
and fit for mowing and disposal of rubbish as directed, -- Contd.

.... Contd. -- including supplying good earth, sludge or manure,

if needed (cost of sludge/manure & good earth to be paid
separately)
161130 Uprooting rank vegetation and weeds by digging the area to a 100 Sqm 1616.87
depth of 60cm removing all weeds and other growth with roots
by forking repeatedly, breaking clods, rough dressing, flooding
with water, uprooting fresh growths after 10 to 15days and then
fine dressing for planting new grass, including disposal of all
rubbish with all leads and lifts
161140 Preparation of beds for hedging and shrubbery by excavating cum 58.40
60cm deep and trenching the excavated base to a further depth
of 30cm, refilling the excavated earth after breaking clods and
mixing with sludge or manure in the ratio of 8:1 (8 parts of
stacked volume of earth after reduction by 20%: 1part of
stacked volume of sludge or manure after reduction by 8%)
flooding with water, filling with earth if necessary, watering and
finally fine dressing, levelling etc. including stacking and
disposal of materials declared unserviceable and surplus earth
by spreading and levelling as directed, within a lead of 50m lift
upto 1.5m complete (cost of sludge, manure or extra earth to
be paid for separately)
161150 Digging holes in ordinary soil and refilling the same with the
excavated earth mixed with manure or sludge in the ratio 2:1
by volume (2parts of stacked volume of earth after reduction by
20% : 1part of stacked volume of manure after reduction by
8%) flooding with water, dressing including removal of rubbish
and surplus earth, if any with all leads and lifts (cost of manure,
sludge or extra good earth if needed to be paid for separately)
161151 Holes / pits 1.2m dia and 1.2m deep Each 184.15
161152 Holes/pits 60cm dia. and 60cm deep Each 27.28
161153 Holes / Pits 45 cm Dia and 60 cm deep Each 14.11
161160 Half brick circular tree guard in 5.0/7.5 class designation bricks,
internal diameter 1.25metre and height 1.2metre above ground
and 0.20m below ground bottom two courses laid dry and top
three courses in lime mortar 1:2 (1lime putty: 2surkhi) and the
intermediate courses being in dry honey comb masonry as per
161161 design
(a) Withcomplete
F.P.S. bricks 5.0 class designation Each 615.70
161162 (a) With F.P.S. bricks 7.5 class designation Each 775.98
161170 Providing and fixing M.S. flat iron tree guard 60cm dia. And 2m Each 1686.40
height above ground level formed of 4Nos. 25x6mm and 8Nos.
25x3mm vertical M.S. flat riveted to 3Nos. 25x6mm M.S. flat
iron rings in two halves, bolted together with 8mm dia and
30mm long bolts including painting two coats with paint of
approved brand and manufacture over a coat of priming,
complete in all respects
161180 Providing and Making tree guard 53cm dia and 1.3m high as per
design from contractor's own empty coal tar drums including
providing and fixing 2 Nos. M.S. sheet rings 50x0.5mm with
rivets complete in all respects including painting inside and
outside of tree guard with :
161181 A coat of cal tar Each 247.10
161182 Two or more coats of ready mixed paint of approved quality Each 329.65
shade over a priming coat

161190 Providing and Making tree guard 53cm dia and 2m high as per
design from contractor's own empty coal tar drums including
providing and fixing four legs 40cm long of 30x3mm M.S. flat
riveted to tree guard and providing and fixing 2Nos. M.S. sheet
rings 50x0.5mm with rivets complete in all respects including
painting inside and outside of tree guard with :
161191 A coat of cal tar Each 454.86
161192 Two or more coats of ready mixed paint of approved quality Each 582.13
shade over a priming coat
161200 Edging with bricks (Along Kiaris, lawns or hedges etc) laid dry
including excavation, refilling, consolidating with hand packing
and spreading neatly, surplus earth within a lead of 50metres
161201 7.5 class designation, F.P.S. bricks laid length wise metre 17.67
161202 5.0 class designation, F.P.S. bricks Laid length wise metre 14.19
161203 7.5 class designation, F.P.S. bricks, laid in tooth edged pattern metre 24.49
at an angle of 60 degree with horizontal
161204 5.0 class designation, F.P.S. bricks laid in tooth edged pattern at metre 19.26
an angle of 60 degree with horizontal
161210 Filling mixture of earth and sludge or manure in the desired cum 15.44
proportion in trenches, flooding with water and levelling (cost of
supplying earth and sludge or manure and mixing excluded).
(Payment for only net quantity of all the ingredients will be
done)
161220 Excavation in dumped stones or malba/ garbage / rubbish cum 132.93
including stacking of serviceable and unserviceable material
separately and disposal of unserviceable material lead upto
50metre and lift upto 1.5metre and disposed material to be
neatly dressed.(additional lead and lift if any to be paid extra as
per earthwork chapter)
161230 Flooding the ground with water including making kiaries and 100 Sqm 75.44
dismantling the same.
161240 Cutting, trimming and pruning, hedging of all types into proper Sqm 2.65
shape & line as directed by Engineer In-charge including the
removal and disposal of the cut materials. (Measurement shall
be of the total area of faces and top of the hedging, which has
been trimmed).
161370 Supplying of seasonal flower saplings / seedlings including all
lead & lift, carriage, handling etc.
161371 Antirrhinum Each 10.01
161372 Phlox drumondii Each 3.61
161373 Nasturtium Each 3.55
161374 Salvia Each 8.41
161375 Balsam Each 8.27
161376 Calendula Officinalis Each 7.32
161377 Poppy Each 3.66
161378 Carnation Each 16.50
161379 Carnation (hybrid) Each 27.25
161460 Sowing and maintaining for a month of flower seeds including Sqm per 43.74
preparation of surface & watering, as required and manuring, month
nursing & removing grasses etc, from date of sowing
(maintenance as required or as directed by engineer-in-charge)

161470 Supplying & sowing of seeds of specified varieties of Sqm 85.78

trees/shrubs in a well fenced area or along a fencing as
nominated by the Engineer's representative including
preparation of bed, watering, manuring, applying insecticides
etc. complete in all respects. The seed should be nursed for a
period of 3 months from the date of sowing including supply of
labour and material. Trees include Amaltas, Casuarina,
Eucalyptus, Jacaranda, Jarul, Karanj, Ashoka, Phurush, Babla,
Sisham, Sal, Segun etc.
161480 Maintenance of lawn, shrubs, hedge, trees etc. including
watering, trimming, manuring, spraying insecticide and
guarding as required. This includes supply of labour, tools &
plants including materials
161481 Lawn 10 sqm 23.49
/month
161482 Shrubs Each/ 18.91
month
161483 Hedge metre/ 16.79
month
161484 Tree Each/month 19.52
161485 Shrubbery borders (group plantation) Sqm/ month 27.15
161520 Uprooting weeds on or from station platforms, surroundings as 100 Sqm 330.60
well as slopes after loosening surface by raking
161530 Transplantation of marked Tree of various species and girth to
the place shown by Engineering representative in the lead up to
1.5 Km. with all tools, plant, men and machinery and necessary
preparation such as
161531 Preparation of earthen ball of tree roots of desired depth and Each 246.89
diameter
161532 Unloading, lifting and Transplanting tree from original place to Each 590.33
new place directed by engineer including all arrangements, T&P,
labour etc. for successfully completing the work (Tree height to
be minimum 1.5 m)
161533 Excavating of pits of adequate size arranging loose soil, mixing Each 123.45
of manure fertilizer insecticide etc. to ensure survival of the
trees being transplanted maintain
161534 Maintenance of trees i.e. watering manuring soil heaping spray Each/mon 201.71
of insecticide etc. till the sprouting and establishment of trees th
up to 6 months
161540 Supply & Fixing grass tiles of grass selections No.1 or Mexican Sqm 276.93
healthy and fresh grass free from weeds of 1’ X 1’ or bigger size
tiles as required by engineer-in-charge
161550 Filling the earthen pots with good planting soil mixed with 25%
manure including planting the sapling, watering & maintaining
the pots for 3 months. The rate excludes pot, soil, manure &
plants. Condition of the plant will be inspected at end of every
month and suitable penalty imposed if the plant is not being
maintained properly. The payment will be released @25% per
month and balance will be paid after completion of three
months. No penalty will be imposed if the blooming period is
over and plant dies being seasonal in nature. The top dia will be
measured from inside and the bottom dia and ht from outside
Tolerance is +/- 1.5. cm
161551 Height 15 cm, Upper dia 15cm & bottom dia 10 cm Each/ 94.45
month

month
month
month
month
161560 Filling cement sand/ stone sand pots with good planting soil
mixed with 25% manure including planting the sapling and
watering & maintaining the pots for a period of 3 months. The
rate excludes pots, soil, manure, plant. The top dia will be
measured from inside and the bottom dia and ht from outside.
Tolerance is +/- 1.5 cm
month
month
month
month
month
161570 Filling of polythene bags with earth, manure etc. as per 100 bags 196.44
instructions & directions of officer in charge and plantation of
cutting/sowing of seeds/seedlings in polythene bags incl. all
labour, T&P etc. But excluding the cost of polybags, earth,
manure and seed/ seedling/ cutting complete as per direction of
Officer in charge
161580 Laying of grass turf in proper level including scrapping of grass Sqm 50.00
from the given site in turfs size 1x1 ft. approx. or desired size,
transportation at site, watering, rolling, mowing, weeding and
maintenance of the lawn upto a period of one month from the
date of turfing as per direction of Officer in charge, with all
labour, tools, and tackles complete. 50% payment after laying
and 50% after one month
161590 Landscaping and making mounds and giving shape as per the Sqm 24.40
requirements (Area to be measured from bottom of mound)
161600 Supply and planting of edge plants including cost of plants, Each/ 158.94
transportation, labour, T&P etc. complete and maintenance for a year
period of one year from the date of plantation as per direction of
O.I.C. (Mode of payment:-25% payment will be made after
planting, 25% after six months, 25% after nine months and rest
25% after one year)
161610 Maintenance of rose flower bed by doing all horticultural
operations like hoeing, forking, breaking of clods, dressing,
mixing of manure and fertilizers, watering, weeding, replanting
of dead plants, cutting/ trimming complete in all respects as per
specifications and direction by officer in charge including cost of
labour with tools and tackles but excluding the cost of manure,
good earth, fertilizers, plants pesticides etc.
161611 A) Rose bed upto 2000 Sqm area at a place Sqm/ 8.86
month

161612 B) Rose bed above 2000 Sqm area at a place Sqm/ 6.64
month
161620 Maintenance of seasonal potted plants and permanent potted
plants by doing all horticultural operations like making mixture,
plantation of plants, filling & re-filling, cutting, weeding,
watering, staking, coloring, loading, unloading, arranging the
pots within 100 m radius and application of pesticides as and
when required complete in all respects as per direction of Officer
in charge including cost of labour with tools & tackles but
excluding the cost of manure, soil, fertilizers, pesticides, plants,
pots etc.
161621 A) Up to 12” size pot/Container Each/ 23.74
month
161622 B) Above 12” size pot/Container Each/ 33.67
month
161630 Maintenance of cuttings & plants planted in polythene bags Each/ 31.39
including watering. Weeding shifting, replacement etc. complete month
as per instruction of Officer in charge in all labour and T&P etc.
161640 Pruning / trimming of unwanted branches of trees and its
disposal up to 100 mtr to the area identified by the officer in
charge
Trees up to 2 mtr. Height (average) Each 38.04
161650 Pruning / trimming of unwanted branches of trees and its
disposal up to 100 mtr to the area identified by the officer in
charge
Trees above 2 mtr. Height (average) Each 57.96
161660 Supplying of all types & different varieties of seasonal (Summer, Packet 59.82
rainy and winter) flowers and vegetable seeds packets of 10
gms each of reputed company of national brands
161670 Coloring of Cement Pots with Water-proofing Paint
161671 Height 15 cm, Upper dia 15cm & bottom dia 10 cm Each 9.39
161680 Coloring of Earthen Pots with Water-proofing Paint
161690 Supply and plantation of chlorodendran inerme hedge plants at m/month 15.99
a distance of 10 to 15 cm including watering and providing
stacks where required and maintenance upto 12 months from
date of completion of plantation, complete with all labour and
materials
161700 Supply of cement pot at site as per direction of officer in charge
161710 Supply of earthen pot at site as per direction of officer in charge

161720 Supply of Hanging Basket (G.I wire plastic coated)
161800 Supply of Insecticide/Pesticide
161801 i. Lindane dust Kg 22.77
161802 ii. Methylparathion Kg 25.96
161803 iii. Indosulphon (Thiodan) 35 E.C Litre 422.61
161804 iv. Malathion 50 E.C. Litre 336.95
161805 v. Rogor 30 E.C. Litre 367.92
161806 vi. Nuvan 100 E.C. Litre 677.04
161807 vii. Dimecron 100 E.C Litre 550.13
161808 viii. Bavistin (100 gm packet) Packet 90.13
161809 ix. Dithan-M45. Kg 311.90
161810 x. Blitox Kg 220.92
161811 xi. Furadon. 3 G Kg 87.23
161812 xii. Thimet 10 G Kg 93.04
161813 xiii. Chlorpyriphos (For termite control) litre 311.90
161814 xiv. Durmet (for termite control) litre 511.29
161900 WEEDICIDE
161910 i. Glyphosate litre 580.05

161911 ii. 2-4 D ethyl ester litre 337.30
161920 SUPPLY OF FERTILIZER/ORGANIC MANURE
161921 i. Super phosphate Kg 43.67

161922 ii. Potash Kg 10.57
161923 iii. NPK 12:32:16 etc. Kg 69.81
161924 iv. Urea 46% Kg 15.22
161925 v. DAP Kg 19.86
161926 vi. Zinc Sulphate Kg 81.81
161927 vii. Rose mixture Kg 69.81
161928 viii. Neem Cake Kg 14.38
161929 ix. Mustard cake Kg 27.93
161930 x. Bone dust Kg 26.77
161931 xi. Neem shield Kg 44.20
161932 xii. Amonium Sulphate Kg 29.10
161933 xiii. Som/Shakti or equivalent (bio organic manure made of Kg 17.48
sugar by product etc.)
161934 xiv. Sterameal/Agromeal or equivalent Kg 13.42
161940 HORMONES/PLANTS TONIC
161941 a. Rootex/Seradex gm 31.95
161942 b. Agri Sorb plus Kg 842.20
161943 c. Planofix Litre 563.79
161950 DIFFERENT STONES REQUIRED FOR WATER FALL / LAND
SCAPING
161951 a. Supply of chilker/khokhal stone of different sizes as per MT 953.59
instruction of officer-in-charge. Delivery at site
161952 b. Supply of kali slate stone of different sizes as per instruction MT 988.44
of Officer-in-charge. Delivery at site

161953 c. Supply of white marble stone of different sizes as per MT 1394.96

instruction of Officer-in-charge. Delivery at site
161954 d. Supply of khanger (Clinker) stone of different sizes as per cum 718.68
161955 e. Supply of Haridwar pebbles of different sizes as per MT 1162.66
161960 SUPPLY OF BULBS (Fully rested)
161961 a. Gladioli (different colors - American/Dutch hybrid of sizes Each 9.70

40mm to 50mm dia)
161962 b. Narcissus Each 10.57
161963 c. Amaryllis Each 14.93
161964 d. Lily (Asiatic) Each 21.41
161965 e. Daffodil Each 22.77
161966 f. Lilium Each 24.80
161967 o. Ornithogellum Each 20.25
161968 h. Tulip Each 43.09
161969 i. Hyacinth Each 41.35
161970 j. Caladium Each 11.15
161971 k. Football lily Each 11.73
161972 l. Anemone Each 14.63
161973 m. Fressia Each 14.83
161974 n. Iris Each 18.70
161980 SUPPLY OF ROOTED CUTTINGS
161981 a. Dahlia of different varieties Each 5.92

161982 b. Chrysanthemum of different varieties Each 5.15
161983 c. Carnation Each 9.41
161984 d. Gerbera (hybrid suckers) Each 23.93
161990 Supply of Moss grass stick made of superior quality PVC pipe Each 34.96
20mm dia & 3’ long covered around with thick layer of moss
grass with chicken wire mash
162000 Supply of Moss grass stick made of sup. quality PVC pipe 20mm Each 40.88
dia & 4’ long covered around with thick layer of moss grass with
chicken wire mesh / synthetic mesh
162010 Supply of Moss grass cleaned Kg 69.81
162020 Supply of water proofing cement paint of different color Kg 41.48
162030 Supply of polythene bags 100 micron for raising plants as per Kg 112.78
direction officer incharge
162040 Supply of HDPE - plastic agro shading net : color Sqm 54.42
green/white/black Shade 5-50%- 60%- 75% and Width 3 m
162050 Supply Of Plants/Trees {Notes - Supplying well grown plants-
bushy and healthy, minimum height as specified (exposed
height) including all lead & lift, carriage, handling etc.} (Size of
pot will be upper inner dia of pot)
162060 Avenue Plants
162061 Alstonia scholaris of height 150-180 cm in earthen pots of size Each 87.93
25 cm
162062 Alstonia scholaris of height above 180 cm in earthen pots of size Each 224.79
25 cm
162063 Azadirachta Indica (Neem) of height 120-135 cm in big polybag Each 61.21
of size 25-30cm
162064 Bassis latifolia (Mahua) of height 90-120cm in big polybag of Each 50.56
size 25-30cm
162065 Bauhinia purpurea (Kachnar) of height 60-90 cm in big polybag Each 46.69
of size 25-30cm

162066 Bottle palm of height 150-165 cm in earthen pots of size 30 cm Each 110.57
162067 Butea frondosa (Flame of forest) of height 60-90 cm in big Each 60.63
polybag of size 25-30cm
162068 Caryota mitis (Fish tail palm ) of height 120-135 in each earthen Each 113.83
pots of size 25cm
162069 Casuarina equisitifolia of height 120-135 cm in big polybag of Each 62.66
size 25-30cm
162070 Cassia fistula (Amaltash) of height 120-135cm in big polybag of Each 62.95
size 25-30cm
162071 Cassia siamea of height 120-135cm in big polybag of size 25- Each 58.31
30cm
162072 Chukrassia tabularis of height 150-165cm in big polybag of Each 75.73
size25-30cm
162073 China Palm of leaves 4-5 in earthen pots size 25cm Each 69.92
162074 Chorisia speciosa of height 120-135 cm in big polybag of size 25- Each 75.73
30cm
162075 Ceiba pentandra of height 120-135 cm in big polybag of size 25- Each 49.40
30cm
162076 Cycus revoluta (Cycus palm) of leaves 10-15 in earthen pots of Each 349.61
size 30cm
162077 Cycus revoluta (Cycus palm) of leaves 20-25 in cement each pot Each 873.45
size 35cm
162078 Cycus revoluta of leaves 35-40 in cement pots of size 45 cm Each 1279.97
162079 Dalbergia sissoo (seas am) of height 120-135 cm in big each Each 46.69
162080 Delonix regia (Gulmohar) of height 135-150 cm in big each Each 47.47
162081 Erythrian Indica of height 90-120 cm in big polybag of size 25- Each 40.11
30cm
162082 Eugenia Jambolana (Jamun) of height 120-135 cm in big Each 40.88
162083 Ficus benjmina (green of height 120-135 cm in big polybag size Each 53.43
25-30cm
162084 Ficus bengalensis (Barged) of height 90-120 cm in big polybag Each 52.85
size 25-30cm
162085 Ficus bengalensis (variegated) of height 60-75 cm in earthen Each 174.46
pots size 30cm
162086 Ficus blackii (F.Vivion) well branched (Bushy) of height 120-135 Each 175.39
cm in earthen pots of size 30cm
162087 Ficus elastica Decora (Rubber plant) of height 45-60 cm in each Each 62.18
earthen pots of size 25 cm
162088 Ficus infectoria (Pilkhan) of height 135-150 cm in big polybag of Each 56.37
size 25-30cm
162089 Ficus Lyrata of height 45-60 cm in earthen pots of size 25 cm Each 66.05
162090 Ficus regnold well branched (bushy) of height 120-135cm in Each 111.50
cement pos of size 35cm
162091 Ficus religiosa (Peepal) of height 120-135 cm in big polybag of Each 44.76
size 30-35cm
162092 Ficus retusa well branched of height 120-135 cm in earthen pots Each 82.47
of 25cm
162093 Ficus shiela of height 120-135 cm in big polybag of size 30- Each 64.11
35cm
162094 Ficus starlite of height 60-75cm in earthen pots size 25 cm Each 248.95
162095 Ficus starlite of height 90-105 cm in cement pots of size 35 cm Each 552.87

162096 Grevillea robusta (Silver Oak) of height 150-165cm in big Each 73.76
polybag of size 30-35 cm
162097 Heterophragma adenophyllum (Marore fail) of height 120- Each 86.82
135cm in big polybag of size 30-35cm
162098 Jacaranda mimosifolia of height 90-120cm in big polybag size of Each 73.95
size 30-35cm
162099 Juniperus chinenses of height 120-135cm in cement pots of size Each 76.66
35cm
162100 Kigelia pinnta of height 90-120cm in big polybag of size 30- Each 60.11
35cm
162101 Lagerstroemia flosreginae of height 120-135cm in big polybag Each 51.40
of size 30-35cm
162102 Largerstroemia thorelli of height 120-135cm in big polybag of Each 47.62
size 30-35cm
162103 Lavestonia rotundifolia (Lavestonia palm) of leaves 4-5 in Each 80.53
earthen pots of size 25cm
162104 Mangifera Indica (Mango of height 60-75 cm in big polybag of Each 56.33
size 30-35cm
162105 Melia azedarach of height 60-90 cm in big polybag of size 30- Each 46.85
35cm
162106 Michelia champa (Golden Champa) of height 60-75 cm in Each 65.04
162107 Milletia ovalifolia of height 60-70cm in big polybag of size 30- Each 50.72
35cm
162108 Millingtonia hortensis of height 90-120cm in big polybag of size Each 66.50
30-35cm
162109 Mimusops elengi (Maulsri) of height 150-165cm in big polybag Each 79.85
of size 30-35cm
162110 Nauclea Cadamba (Kadmba ) of height 90-120cm in big polybag Each 41.81
of size 30-35cm
162111 Nyctanthes arbortrists (Harsingar) of height 45-60cm in earthen Each 44.72
pots of size 20cm
162112 Parkinsonia species of height 30-45cm in big polybag of size 30- Each 25.50
35cm
162113 Phoenix roebelenii (Phoenix palm) of 10-12 leaves in earthen Each 105.70
pots of size 25cm
162114 Pinus longifolia (Pinus) of height 90-120 cm in cement pots of Each 326.38
size 35 cm
162115 Plumeria acutifolia of height 120 to 135cm in gunny bags Each 146.35
162116 Plumeria alba ht. well developed of height 120-135cm in gunny Each 207.33
bags
162117 Plumeria alba 3-4 branched in of height 150-180cm in gunny Each 358.32
bags
162118 Pongamea glabra (Papdi) of height 120-135 cm in big polybag Each 53.43
size 30-35cm
162119 Polyalthia longifolia (Ashoka) of height 150-165cm in earthen Each 77.24
pots of size 25cm
162120 Polyalthia pendula (Ashoka Pendula) of height 150-165 cm Each 94.66
162121 Pterospermum acerifolium (Kanak champa) of height 150-180 Each 65.92
cm in big polybag of size 30-35cm
162122 Putranjiva roxburghii of height 60-75 cm in big polybag of size Each 14.81
30-35cm
162123 Ravenala madagascariensis (Traveler palm ) of height 60-90cm Each 144.90
in earthen pots of size 30cm

162124 Saraca Indica (Sita Ashok) of height 60-75 cm in big each Each 66.98
polybag of 30-35cm
162125 Schleichera trijuga (Kusum) of height 150-165cm in big polybag Each 69.40
of size 30-35cm
162126 Spathodea campanulata of height 120-135cm in big polybag of Each 82.47
size 30-35cm
162127 Tecoma Argentea of height 60-75 cm in big polybag of size 30- Each 81.01
35cm
162128 Any other kind of tree of height 120-150 cm in earthen pots of Each 72.30
size 25cm
162129 Any other kind of tree of height 210-240-cm in gunny bag Each 111.12
162200 Shrubs
162201 Acalypha species (Red/Green of height 30-45 cm in earthen Each 53.43

pots of size 25 cm
162202 Acalypha species (red/green ) of height 30-45 cm in earthen Each 46.17
pots of size 20 cm
162203 Adenium obesum of height 45-60 cm in earthen pots of 25 cm Each 268.31
162204 Adenium obesum well branched specimen plant of height 60-75 Each 500.61
cm in earthen pots of size 30 cm
162205 Allamanada cathertica of height 45-60 cm in earthen pots of Each 32.23
size 20 cm
162206 Bauhinia tomentosa (Yellow )of height 30-45 cm in earthen pos Each 44.72
of size 20cm
162207 Beloperone species of height 30-45 cm in earthen pots of Each 46.17
size20cm
162208 Bougainvillea (mix variety) of height 30-45 cm in polybag of Each 27.30
size 10-15 cm
162209 Bougainvillea (mix variety) of height 30-45 cm in earthen pots Each 32.13
20cm
162210 Bougainvillea (named variety, bushy plant full bloom) of height Each 128.93
45-60 cm in cement pots of size 30cm
162211 Bougainvillea named variety, bushy plant full bloom of height Each 80.53
30-45 cm in earthen pots of size 25 cm
162212 Bougainvillea (Named variety, bushy plant in full bloom, healthy Each 187.58
plant of height 60-75 cm in cement pot of size 35 cm
162213 Budded roses of mixed variety, in bloom in polybag of size 30- Each 24.39
35 cm
162214 Budded roses (H.T) named variety, in bloom in cement pots of Each 70.85
size 25 cm in polybag of size 30-35 cm
162215 Calliandra species of height 30-45 cm in earthen pots of size Each 43.75
20cm
162216 Cassia biflora of height 45-60 cm in earthen pots of size 20 cm Each 37.94
162217 Cassia biflora of height 30-45 cm in polybags of size 30-35cm Each 25.26
162218 Cassia laviegata of height 45-60 cm in earthen pots of size Each 43.75
162219 20cm
Cassaia laviegata of height 30-45 cm in polybag of size 15- Each 27.59
162220 20cm
Chinese lavender of height 30-45m in earthen pots of size 20cm Each 32.52
162221 Chrysanthemum potted plant in full bloom of height 30-45 cm in Each 66.50
162222 Coleus blumii of height 30-45 cm in earthen pots of 20 cm Each 40.65
162223 Croton (broad leaves) 3-5 branched of height 90-120cm in Each 187.00
cement pots of size 30cm

162224 Croton different varieties of height 30-45 cm in earthen pots of Each 68.92
size 25 cm
162225 Croton different varieties of height 30-45 cm in earthen pots of Each 55.46
size 20 cm
162226 Croton Petra (Banglori) of height 30-45 cm in earthen pots of Each 152.16
size 20 cm
162227 Cuphea chinensis of height 30-45 cm in earthen pots of size Each 37.46
20cm
162228 Duranta goldiana of height 30-45 cm in earthen pots of size Each 22.94
20cm
162229 Duranta goldiana of height 30-45 cm in earthen pots of size 15- Each 30.90
20cm
162230 Duranta variegated of height 30-45 cm in earthen pots of size Each 23.93
20cm
162231 Euonymus japonica (Variegated) of height 30-45 cm in earthen Each 42.92
pots of size 20cm
162232 Euphorbia caracasanna (bronze colour leaves) of height 30-45 Each 78.32
cm in earthen pots of size 20cm
162233 Euphorbia leucoscephala (white/red) well branched (poinsettia Each 133.69
white) of height 45-60cm in earthen pots of size 25cm
162234 Euphorbia milli of height 30-45 cm in earthen pots of size 20cm Each 58.08
162235 Euphorbia milli Thaihybried (large flowers) of height 30-45 cm Each 157.96
162236 Euphorbia pulcherrima (dark red double bracts) well branched Each 128.93
(poinsettia fireball) of height 45-60 cm in earthen pots of size
25cm
162237 Euphorbia pulcherrima (Dark red) well branched (poinsettia red) Each 96.02
of height 45-60 cm in earthen pots of size 25 cm
162238 Euphorbia pulcherrima (dwarf) well branched (poinsettia hybrid Each 181.19
red) of height 30-45 cm in earthen pots of size 20 cm
162239 Excoecaria bicolor of height 45-60cm in earthen pots of size Each 40.36
20cm
162240 Ficus nitida (ficus panda) of height 30-45cm in earthen pots of Each 47.62
size 20cm
162241 Galphimia gracilis of height 30-45 in earthen pots of size 20 cm Each 41.81
162242 Gardenia jasminoides of height 30-45 cm in earthen pots of size Each 59.24
20cm
162243 Hamelia patens of well developed of height 30-45 cm in each Each 18.58
polybag
162244 Hibiscus rosa sinensis of height 45-60 cm in earthen pots of size Each 37.46
20cm
35cm
162246 Hibiscus Variegated of height 45-60 cm in earthen pots of size Each 40.36
20cm
162247 Hibiscus Variegated of height 60-75 cm in earthen pots of size Each 59.24
25cm
162248 Ixora singaporensis of height 30-45 cm in earthen pots of size Each 57.78
20cm
162249 Ixora species of height 30-45 cm in earthen pots of size 20 cm Each 53.43
162250 Jacobinea carnea of height 30-45 cm in earthen pots of size 20 Each 75.50
cm
162251 Jasminium sambac (Motia) of height 30-45 cm in polybag of size Each 25.84
20cm

162252 Jatropha (red colour) of height 30-45 cm in polybag Each 28.17

162253 Jatropha (red colour) of height 60-75 cm in earthen pots of size Each 45.30
20cm
162254 Jsuticea ovata of height 30-45 cm in earthen pots of size 20 cm Each 41.23
162255 Lantanna depressa of height 30-45 in earthen pots of size 20cm Each 24.39
162256 Lantanna depressa of height 20-25 cm in polybag of size 15- Each 19.75
20cm
162257 Lantana sellowiana in bloom of height 30-45 cam in earthen Each 21.49
pots of 15cm
162258 Largerstroemia indica of height 30-45 cm in polybag of size 15- Each 20.62
20cm
162259 Largerstroemia indica of height 60-75 cm in earthen pot of size Each 33.10
20cm
162260 Limonium spectabillis of height 30-45 cm in earthen pots of size Each 41.81
20cm
162261 Malpighia coccigera of height 30-45cm in earthen pots of size Each 56.33
20cm
162262 Manihot esculenta variegated (Tapioca) of height 30-45 cm in Each 43.27
162263 Murrya exotica of height 30-45 cm in polybag of size 15-20 cm Each 13.65
162264 Mussaenda crythrophylla of different colours of height 60-75 cm Each 131.83
162265 Narium oleander (kaner) of height 30-45 cm in polybag of size Each 17.71
15-20cm
162266 Narium Vareigated of height 45-60 cm in earthen pots of each Each 34.26
size 20cm
162267 Plumbago capensis of height 30-45 cm in earthen pots of size Each 39.20
20cm
162268 Poinciana pulcherima of height 45-60cm in earthen pots of size Each 33.97
20 cm
162269 Poinciana pulcherima of height 30-45 cm in polybag of size 15- Each 14.81
20 cm
162270 Russelia juncea of height 30-45 cm in earthen pots of size 20 Each 36.01
cm
162271 Sansevieria trifasciata of height 30-45 cm in earthen pots of Each 32.81
size 20 cm
162272 Tabernaemontana cororiaria (Chandni single) of height 45- 60 Each 28.46
cm in earthen pots of 20 cm
162273 Tabernacmontana coronaria (ChandniVaruegated) of height 45- Each 36.30
60 cm in earthen pots of 20 cm
162274 Tabernacmontana coronaria (Chandni) of height 45-60 cm in Each 14.81
162275 Tecoma gaudichaudi of height 30-45 cm in earthen pots of size Each 30.20
20 cm
162276 Tecoma capnsis of height 30-45 cm in earthen pots of size 20 Each 38.91
cm
162277 Thevetia nerifolia ht. Well developed of height 30-45 cm in Each 15.97
162278 Thuja competa of height 75-90 cm in earthen pots of size 30 cm Each 152.16
162279 Cama (dwarf) of height 30-45 cm in earthen pots of size 20 cm Each 29.42
162280 Any other kind of shrubs of height 30-45 cm in earthen pots of Each 36.01
20 cm
162300 Foliage and Indoor Plants

162301 Aglaonema species of height 30-45 cm in earthen pots of size Each 59.82
20 cm
162302 Aglaonema species of height 30-45 cm in earthen pots of size Each 76.66
25 cm.
162303 Alpinia zerumbet variegated of height 30-45 cm in earthen Each 59.24
each pots of size 25 cm
162304 Alocasia species of height 30-45 cm in earthen pots of size Each 63.88
each 25 cm
162305 Anthurium species of height 30-45 cm in earthen pots of each Each 67.95
size 25 cm
162306 Anthurium veitchii of height 30-45 cm in earthen pots of size Each 78.98
25 cm
162307 Aralia species of height 30 to 45 cm in earthen pots of size 25 Each 64.46
cm
162308 Aralia species of height 30 to 45 cm in earthen pots of size Each 32.13
20cm
162309 Areca palm 4-5 suckers of height 90-105 cm in earthen pots of Each 115.86
size 25 cm.
162310 Areca palm 4-5 suckers of height 120-135cm in earthen pots of Each 156.03
size 25 cm.
162311 Areca palm 4-5 suckers of height 180-210 cm in cement pots of Each 291.54
size 35 cm
162312 Araucaria cookii of height 30-45 cm in earthen pots of size 20 Each 105.70
cm
162313 Aracaria cookii of height 75-90 cm in earthen pots of size 25 cm Each 167.64
162314 Asparagus mayerii of height 30-45 cm in earthen pots of size 25 Each 105.70
cm
162315 Asparagus mayerii of height 30-45 cm in earthen pots of size 20 Each 44.72
cm
162316 Aspidistra elatior of height 30-45 cm in earthen pots of size 25 Each 41.81
cm
162317 Dieffen bachia (different varieties) of height 30-45 cm in Each 59.24
162318 Dieffen bachia (different varieties) of height 30-45 cm in Each 46.17
162319 Dracaena (Mahatma) of height 30-45 cm in earthen pots of size Each 49.56
20 cm
162320 Dracaena (Song of India) of height 30-45 cm in earthen pots of Each 47.62
size 20 cm
162321 Dracaena fragrance of height 45-60 cm in earthen pots of size Each 70.85
25 cm
162322 Dracaena green of height 30-45 cm in earthen pots of size 20 Each 32.13
cm
162323 Dracaena marginata of height 30-45 cm in earthen pots of size Each 47.62
20 cm
162324 Dracaena reflexa of height 30-45 cm in earthen pots of size 20 Each 41.81
cm
162325 Dracaena rosea of height 30-45 cm in earthen pots of size 20 Each 61.27
cm
162326 Dracaena Victoria of height 30-45 cm in earthen pots of size 25 Each 80.43
cm
162327 Dracaena wameckai of height 30-45 cm in earthen pots of size Each 43.27
20 cm
162328 Eranthemum species of height 30-45 cm in earthen pots of size Each 47.62
20 cm

162329 Double Ficus blackii (F. vivion), well branches (Bushy) of height Each 126.02
45-60 cm in earthen pots of size 25 cm
162330 Double Ficus regnold well branched (Bushy) of height 45-60 cm Each 105.70
in earthen pots of size 25 cm
162331 Monestra mounted on 3' moss stick of height 30-45 cm in Each 203.55
162332 Money plant 3' moss stick (3 in one) in earthen pots of size 25 Each 150.41
cm.
162333 Nephrolips species (Fern) of height 30-45 cm in earthen pots of Each 80.43
size 25 cm
162334 Nephrolips species (Fern) in earthen pots of size 20 cm Each 48.20
162335 Philodendron Janado of height 30-45 cm in earthen pots of size Each 201.81
25 cm
162336 Philodendron oxycardium mounted in 3' moss stick (3 in one) in Each 205.88
162337 Philodendron sellum of height 30-45 cm in earthen pots of size Each 79.56
25 cm
162338 Rhapis excelsa (Rhapis palm) of height 45-60 cm in earthen Each 185.45
pots of size 30 cm
162339 Scheafflera (Green) of height 30-45 cm in earthen pots of size Each 40.36
20cm
162340 Scheafflera (Variegated) of height 30-45 cm in earthen pots Each 51.98
each of size 20 cm
162341 Scheafflera high colour of height 30-45 cm in earthen pots of Each 105.70
size 20 cm
162342 Scheafflera high colour of height 45-60 cm in earthen pots of Each 156.51
size 25 cm
162343 Scheafflera clevelandii of height 30-45 cm in earthen pots of Each 112.96
size 25 cm
162344 Syngonium (Butterfly variegated) of height 30-45 cm in Each 41.23
162345 Syngonium variegated Mounted on 3 ' Moss stick ( Three plants Each 198.62
in one pot ) in earthen pots of size 25cm
162346 Any other kind of foliage plants in well developed display of Each 167.64
height 30-45 cm in earthen pots of 30cm
162400 Climber Plants
162401 Allamanda species of height 30 to 45 cm in earthen pots of size Each 36.88
20 cm
162402 Bignonia venusta (Golden shower) of height 30-45 cm in Each 28.26
162403 Bougainvillea of height 30-45 cm in earthen pots of size 20 cm Each 32.52
162404 Clerodendrum splendens of height 30-45 cm in earthen pots of Each 44.72
size 20 cm
162405 Ipomea purpurea (Moming gory) of height 30-45 cm in polybag Each 13.79
of size 15-20 cm
162406 Jasminum grandiflora (Chameli) of height 30-45 cm in earthen Each 31.65
pots of size 20 cm
162407 Passiflora caerulea (Rakhi, bel) of height 30-45 cm in earthen Each 30.20
pots of size 20 cm
162408 Petrea valubilis of height 30-45 cm in earthen pots of size 20 Each 34.55
cm
162409 Quisqualis indica of height 30-45 cm in earthen pots of size 20 Each 34.55
cm
162410 Tecoma grandiflora of height 30-45 cm in earthen pots of size Each 31.65
20 cm

162411 Vernania elaegnifolia curtain creeper of height 30-45 cm in Each 27.30

162500 Ground Cover Plants
162501 Altermanthera species of height 20-30 cm in earthen pots of Each 12.20
size 15 cm
162502 Asparagus sprengerii in earthen pots of size 20 cm Each 34.55
162503 Chlorophytum (Green) in earthen pots of size 20 cm Each 37.46
162504 Chlorophytum (Variegated) in earthen pots of size 20 cm Each 46.75
162505 Dianella variegated in earthen pots of size 20 cm Each 53.43
162506 Ipomea (Golden leaves) in polybag of size 10-15 cm Each 13.07
162507 Iresine herbstii of height 20-30 cm in earthen pots of size 20 cm Each 20.33
162508 Juniperus prostreta in earthen pots of size 20 cm Each 44.91
162509 Ophipogon green in polybag of size 20 cm Each 35.43
162510 Ophiopogon variegated in polybag of size 20 cm Each 48.20
162511 Portulacria affra (Jade plants) in earthen pots of size 20 cm Each 36.01
162512 Setcreasea purpurea in earthen pots of size 20 cm Each 47.91
162513 Syngonium (Butterfly variegated) in earthen pots of size 20 cm Each 45.30
162514 Tradiscantia in earthen pots of size 20cm Each 29.62
162515 Wadelia trilobata in polybag Each 8.13
162516 Zebrina pendula in earthen pots of size 20 cm Each 29.04
162600 Hedge/Edge Plants
162601 Acalypha species (Red/Green) of height 30-45 cm in earthen Each 38.04
pots of size 20 cm
162602 Altemanthera species in earthen pots of size 15 cm Each 15.49
162603 Bougainvillea species of height 30-45 cm in earthen pots of size Each 41.81
20 cm
162604 Clerodendrum inerme ht well developed of height 25-32 cm in Each 8.13
polybag
162605 Duranta goldiana in earthen pots of size 20 cm Each 28.75
162606 Duranta goldiana in polybag Each 9.29
162607 Duranta variegated in earthen pots of size 20 cm Each 33.39
162608 Iresine herbstii (Red grass) in earthen pots of size 20 cm Each 19.36
162609 Hemelia patens of height 30-45 cm in earthen pots of size 20 Each 30.20
cm
20 cm
162611 Lantana species of height 30-45 cm in earthen pots of size 20 Each 43.27
cm
162612 Murrya exotica of height 30-45 cm in polybag Each 18.58
162613 Putranjiva roxburghii of height 30 cm in polybag Each 14.08
162700 Cactus & Succulents
162701 Agave (Green) Kamal Cactusi of height 30-45 cm in earthen Each 33.97
pots of size 25 cm.
162702 Cactus mixed variety medium of height 20-30 cm in earthen Each 72.30
pots of size 20 cm
162703 Cactus specimen plants of height 20-30 cm in earthen pots of Each 90.21
size 20 cm
162704 Furcaria variegated 10-12 leaves in height 20-30 cm in Each 156.03
162705 Furcaria variegated 15-20 leaves in height 20-30 cm in earthen Each 338.00
pots of size 30 cm
162706 Kalanchoe species full bloom of height 20-45 cm in earthen Each 56.33
pots of size 20 cm
162707 Nollina domestica (Phonytail plan) specimen plant of height 45- Each 651.60
60 cm in earthen pots of size 30 cm/ Traypots

162708 Rhoeo discolor of height 20-30 cm in earthen pots of size 20 cm Each 38.33
162709 Yucca (Gluco) of height 30-45 cm in earthen pots of size 20 cm Each 133.28
162710 Yucca green (ordinary) of height 30-45 cm in earthen pots of Each 127.47
size 20 cm
162800 Seasonal and Other Plants
162801 Amaryllis Lily full bloom in earthen pots of size 25 cm Each 67.08
162802 Chrysanthemum potted plants in full bloom of height 30-45 cm Each 36.01
162803 Chrysanthemum potted plants in full bloom of height 30-45 cm Each 60.69
162804 Dahila (named variety in full bloom) of height 30-45 cm in Each 36.01
162805 Dahila (named variety in full bloom) of height 30-45 cm in Each 43.75
162806 Marigold (inca variety in full bloom) of height 20-30 cm in Each 30.20
162807 Marigold (inca variety in full bloom) of height 30-45 cm in Each 37.94
162808 Nymphea varieties (Lotus) bloom (Water plants) in earthen pots Each 314.77
of size 25 cm
162809 Seasonal potted plants in full bloom of height 30-45 cm in Each 59.24
162810 Seasonal potted plants in full bloom of height 30-45 cm in Each 47.62
162900 Other Items
162901 Selection No 1 grass carpet Sqm 68.92
162902 Hanging basket ordinary with plants in proper shape (Small Each 47.62
162903 size)
Hanging basket special with plants in proper shape (medium Each 60.69
size)
162904 khurpa superior quality carbon steel of size 8"x3" with wooden Each 61.17
handle as approved sample
162905 Cane watering 2 Gallon capacity made of G.I sheet 22 gauge Each 163.77
complete with shower
162906 Pneumatic sprayer made of brass instantaneous spray control Each 805.50
by thumb fitted with fine mist spray nozzle small brass pump in
tank for pressuring 1-1/2 litre capacity.
162907 Garden secateur roll cut made of steel sheet heavy duty made Each 277.02
of high carbon steel fitted with brass sheet size 8" make Passi
or Falcon as per sample approved
162908 Garden/Hedge shear heavy duty one piece metal and wooden Each 425.11
handle reinforced full iron rod size 12" as per sample approved
162909 Garden sword with wooden handle heavy duty blade 30" long. Each 90.21
Wooden handle 8" and 4" inside as per sample approved
162910 Hand compression sprayer made of brass - all welded joints &
tested to a specific pressure, brass forged fittings, 110 cm. long
delivery hose pipe all brass control trigger, 61 cm long brass
extension rod, fine mist spray nozzle etc. two adjustable
carrying belts and a funned stainer as per sample approved
162911 (i) 6 litre capacity Each 1794.23
162912 (ii) 9 litre capacity Each 1551.00

163000 Foot sprayer complete with heavy iron frame, having double Each 3582.45
spring, brass cylinder and working parts, all brass balls 2m
section hose & Stainer 8mm continuous delivery hose with brass
connection all brass control trigger 90 cm long brass lauce with
goose neck band and triple action adjustable nozzle as per
sample approved

164010
164020
164030
164040
164050
164060
164070
164080
164090
164100

IR's Unified Standard Schedule Of Rates 2010 Chapter-17 : Miscellaneous Building Works
CHAPTER - 17 : MISCELLANEOUS BUILDING WORKS
Cement
Qty.(qtl.)
171010 Repairs to plaster of thickness 12mm to 20mm in
patches of area 2.5Sq. metres and under including
cutting the patch in proper shape and preparing and
plastering the surface of the walls complete
including disposal of rubbish to the dumping ground
within 100 metres Lead
171011 With cement mortar 1:4 (1cement: 4fine sand) Sqm 90.61 0.070
171012 With cement mortar 1:4 (1cement: 4coarse sand) Sqm 91.74 0.070
171020 Fixing chowkhats in existing opening including
embedding chowkhats in floors or walls, cutting
masonry for holdfasts embedding hold fasts in
cement concrete blocks of 1:2;4 (1cement: 2coarse
sand: 4graded stone aggregate 20mm nominal size)
painting two coats of coal tar to sides of chowkhats
and making good the damages to walls and floors to
match existing surface, complete including disposal
of rubbish to the dumping ground within 50 metres
lead
171021 Door chowkhats Each 337.99 0.120
171022 Window chowkhats Each 218.15 0.060
171023 Clerestory window chowkhats Each 167.23 0.030
171030 Making the opening for door/window /clerestory sqm 238.51
window in brick masonry including dismantling,
fixing chowkhats, cutting masonry and making good
the damages to walls/flooring/jambs to match
existing surface including disposal of malba to the
dumping ground within 50 metres Lead, complete
171040 Renewing glass panes with putty and nails wherever
necessary
171041 Float Glass panes of thickness 4 mm sqm 602.32
171042 Float Glass panes of thickness 5.5 mm sqm 675.29
171050 Renewing glass panes with wooden fillets and nails
wherever necessary
171051 Float Glass panes of thickness 4 mm sqm 692.89
171052 Float Glass panes of thickness 5.5 mm sqm 765.85
171060 Supplying and fixing new wooden fillets with nails
wherever necessary
171061 2nd class teak wood fillets sqm 22.39
171062 Hollock wood fillets sqm 17.72
171070 Renewal of old putty of glass panes (length) metre 12.42
171080 Refixing old glass panes with putty and nails Sqm 160.24
171090 Fixing old glass panes including cutting to suitable Sqm 122.11
size with wooden fillets (excluding cost of fillets and
nails etc.)

Cement
Qty.(qtl.)
171100 Providing and fixing 16mm MS Fan clamps of Each 132.31 0.016
standard shape and size in existing R.C.C. slab
including cutting chase and making good with 1:2
C:S mortar and painting (Two coats) exposed
portion of the clamps complete
171110 Regrading terracing of mud phaska with tiles/brick Sqm 125.68 0.031
by dismantling tiles/bricks, cleaning these before
reuse, removing mud plaster, preparing the surface
of mud phaska to proper slope, relaying plaster
gobri leaping and tiles or bricks, grouted in cement
mortar 1:3 (1cemen t: 3fine sand), replacing
unserviceable tiles or bricks with new ones and
disposal of unserviceable material to the dumping
ground (New tiles or brick to be paid separately)
including all lead, lift etc.
171120 Making opening or recesses in A.C. corrugated/
semi corrugated sheet roofing of girth not more
than 1 metre
171121 Not exceeding 100 sq.cm. in area Each 13.29
171122 Exceeding 100 sq.cm. but not exceeding 400 sq.cm. Each 16.47
in area
171123 Exceeding 400 sq.cm. in area Each 30.06
171130 Taking out wind ties from roof including cutting out Kg 2.70
rusted bolts, nuts etc. incl. lead upto lead 50 M, lift
& stacking in designated store
171140 Fixing of old wind tie with new fittings including metre 43.76
painting two or more coats with anticorrosive
bitumastic paint of approved brand/colour/
manufacture over priming coat of ready mixed zinc
chromate yellow primer/ ready mixed metallic
primer of approved brand
171150 Pointing on brick work with mortar of white cement,
lime putty, marble dust and stone sand in
1marble dust: 1stone sand)
171160 Pointing on tile brick work with mortar of white
cement lime marble dust and stone sand in
1marble dust: 1stone sand)

Cement
Qty.(qtl.)
171170 Providing and laying integral cement based
treatment for water proofing on horizontal surface
at all depths below ground level for under ground
structures levels consisting of (i) 1st layer of 20mm
thick approved rough stone slab over 25mm thick
average base of 1:3 mortar (1cement: 3coarse
sand) mixed with water proofing compound
conforming to IS: 2645 over levelling course
(levelling course to be paid separately). Joints
sealed and grouted with cement slurry mixed with
water proofing compound (ii) 2nd layer of 25 mm
mixed with water proofing compound as per
manufacturer instructions (iii) Finishing top with
stone aggregate of 10mm to 12mm nominal size
spreading @ 8cudm / sqm thoroughly embedded in
the 2nd layer
171171 Using rough kota stone Sqm 671.86 0.342
171172 Using rough red sand stone Sqm 417.92 0.342
171180 Providing and laying integral cement based
treatment for water proofing on the vertical surfaces
by fixing specified stone slab 20mm thick with
cement slurry mixed with water proofing compound
conforming to IS: 2645 in recommended
proportions with a gap of 20mm (minimum)
between stone slabs and the receiving surfaces and
filling the gaps with neat cement slurry mixed with
water proofing compound and finishing the exterior
of stone slab with cement mortar 1:3 (1cement:
3coarse sand) 20mm thick with neat cement
punning mixed with water proofing compound in
recommended proportion complete at all levels and
as directed by the Engineer-in-Charge
171181 Using rough kota stone Sqm 746.01 0.443
171182 Using rough red sand stone Sqm 492.08 0.443
171190 Providing and laying water proofing treatment to Sqm 266.77 0.158
vertical and horizontal surfaces of depressed
portions of WC, kitchen and the like consisting of :
(i) 1st course of cement slurry @ 4.4kg/ sqm mixed
with water proofing compound conforming to IS:
2645 in recommended proportions incl. rounding of
junction of vertical and horizontal surfaces. (ii) 2nd
course of 20mm cement plaster 1:3 (1cement:
3coarse sand) mixed with water proofing compound
(iii) 3rd course of blown or residual bitumen applied
hot @ 1.7kg/ sqm & (iv) 4th course of 400micron
thick PVC sheet with 100mm wide overlaps at joints
pasted to each other with bitumen @ 1.7kg/ sqm
171200 Providing and placing in position suitable PVC water
stops conforming to IS: 12200 for construction
joints between two RCC members and fixed to the
reinforcement with binding wire before pouring
concrete etc. complete

Cement
Qty.(qtl.)
171201 Serrated with central bulb (225mm wide, 8-11mm Sqm 585.02
thick)
171202 Dumb bell with central bulb (180mm wide, 8mm Sqm 567.60
thick)
171203 Kickers (320mm wide, 5mm thick) Sqm 56.54
171210 Providing and laying water proofing treatment in Sqm 133.47 0.012
sunken portion of WCs, bathroom etc. by applying
cement slurry mixed with water proofing cement
compound as per IS 2645 in layers a) 1st layer of
slurry of cement @ 0.488kg/ sqm mixed with water
proofing cement compound @ 0.253 lit/Sqm,
allowed to air cure for 4hours.(b) 2nd layer of slurry
of cement @ 0.242kg/ sqm mixed with water
proofing cement compound @ 0.126 lit/Sqm,
allowed to air cure for 4 hours followed with water
curing for 48hours.Rate includes preparation of
surface, treatment, sealing of all joints, corners,
junctions of pipes and masonry with polymer mixed
slurry. Rendering/ plastering as protective layer, if
required will be paid separately
171220 Providing and laying water proofing treatment on Sqm 224.89 0.020
roofs of slabs by applying cement slurry mixed with
water proofing cement compound as per IS 2645 in
layers (i) After surface preparation, 1st layer of
slurry of cement @ 0.488kg/ sqm mixed with water
proofing cement compound @ 0.253 lit/sqm (ii)
2nd layer of Fibre glass cloth while 1st layer is still
green. Overlaps of joints of fibre cloth should not be
less than 10cm (iii) 3rd layer of 1.5mm thickness
consisting of slurry of cement @ 1.289kg/ sqm
mixed with water proofing cement compound @
0.67 lit/sqm and coarse sand @ 1.289kg/ Sqm,
allowed to air cure for 4hours followed by water
curing for 48hours. (iv) 4th and final layer of brick
tiling with cement mortar which will be paid for
separately
171230 Providing and laying integral cement based water Sqm 410.96 0.387
proofing treatment incl. preparation of surface on
roofs, balconies, terraces etc. (i) Grouting a slurry
coat of neat cement @ 2.75kg/ sqm mixed with
water proofing compound conforming to IS: 2645
inc. walls upto 300mm height. (ii) Laying CC with
brickbats 25 to 40mm with 50% of cement mortar
1:5 (1cement: 5coarse sand) Contd ....
Contd .... mixed with water proofing compound
over 20mm thick layer of cement mortar of 1:5
mortar mixed with water proofing compound to
required slope, treating adjoining walls upto 300mm
height, rounding of junctions. (iii) Curing for 2 days
& applying 2nd coat of cement slurry @ 2.75
kg/sqm mixed with water proofing compound. (iv)
Finishing surface with 20mm thick jointless cement
mortar of mix 1:4 (1cement: 4coarse sand)
including laying of glass fibre cloth of approved

Cement
Qty.(qtl.)
171240 Supplying and applying bituminous solution primer Sqm 21.77
on roof and or wall surface at 0.24litre per sqm
171250 Water proofing of Overhead & Underground water Sqm 338.15 As per
tank by : Providing and fixing 12mm N.B.M.S. site
requirem
threaded nozzle of 75mm length upto reqd. depth in
ent
an approximate grid pattern at a spacing not
exceeding 1.5m c/c on entire flooring, walls etc.
followed by injecting water-proof Non-shrinkable
Polymeric Grouting Compound (NSPGC) mixed with
cement slurry @ 2% of weight of cement through
nozzle under 2.5 kg/cm2 pressure. The grout should
be pumped until it flows through all pores and voids
thereby sealing them. The nozzles should be sealed
with quick setting admixture. Thereafter two coats
of Tapecrete acrylic based polymer water proofing
compound (having solid content 30% ± 2, pH >7)
admixed with cement in 1:2 ratio to be applied on
the entire surface of tank, 12 mm thick 1:4 plaster
(to be paid separately) to be applied as a top coat
171260 Grading / Regrading of roof for water proofing
treatment with :
171261 Cement concrete 1:2:4 (1cement: 2coarse sand: cum 1602.96 3.200
171270 Providing and fixing corner beading of 2nd class metre 359.66
teak wood of size 60x65mm including screws etc.
complete
171280 Providing and fixing fancy printed tiles of size Sqm 472.33 0.009
150x75 mm or any other suitable length confirming
to IS: 15622 in border of baths and toilets on
12mm thick cement plaster 1:3/ chemical adhesive
(1cement : 3coarse sand) jointed with matching
pigment etc. complete
171290 Providing and laying vitrified printed border tiles of Sqm 667.00
size 400x100mm or any other size conforming to
IS:15622 on mosaic floor after hacking with
suitable floor adhesive like ultimate or unitiles etc.
including finishing the joints, pointed with white
cement slurry with suitable pigment to match the
shade of the tiles etc. complete
171300 Providing and fixing stainless steel kitchen rack of Kg 141.27 0.012
suitable size of approved make
171310 Providing & fixing reflective paver blocks of
approved sizes and design, conforming to IS:15658-
2006, manufactured with wet cast vibration system
in two layers, 10-15 mm thick top layer consisting
of graded stone aggregate, silica sand and UV
stabilised iron oxide Bayer colour and bottom layer
with M-40 concrete having galvanised steel fibre
reinforcement; to be fixed over uniform bedding of
50mm thick fine sand & joints filled with sand for
thickness as :

Cement
Qty.(qtl.)
171311 60mm thick reflective paver blocks Sqm 789.85
171312 80mm thick reflective paver blocks Sqm 864.77

171320 Supplying chemical emulsion (Chlorpyriphos / Litre 311.67
Lindane emulsifiable concentrate of 20%) in sealed
containers
171330 Diluting and injecting chemical emulsion
Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration for post constructional anti-termite
treatment (Payment for chemical emulsion to be
made separately)
171331 Along external wall where the apron is not provided metre 8.12
using chemical emulsion @ 7.5 litres/ Sqm of the
vertical surface of the substructure to a depth of
300mm including excavating channel along the wall
and rodding etc. and making good the same
171332 Along the external wall below concrete or masonry metre 12.11
apron using chemical emulsion @ 2.25 litres per
linear metre including drilling & plugging holes etc.
171333 Treatment of soil under existing floors using Sqm 60.04
chemical emulsion @ one litre per hole, 300mm
apart including drilling 12mm diameter holes and
plugging with cement mortar 1:2 (1cement: 2coarse
sand) to match the existing floor
171334 Treatment of existing masonry using chemical metre 9.06
emulsion @ one litre per hole at 300mm interval
including drilling holes at 45 degree and plugging
them with cement mortar 1: 2 (1cement: 2coarse
sand) to the full depth of the hole
171335 Treatment at points of contact of wood work by metre 30.95
chemical emulsion in oil or kerosene based solution
@ 0.5 litres per hole by drilling 6mm dia holes at
downward angle of 45 degree at 150mm centre to
centre and sealing the same
171340 Fixing holding down bolts to timber. (Labour rates Each 17.00
only)
171350 Fixing holding down bolts in masonry. (Labour rates Each 20.70
only)
171360 Re-caning seat and back of chair with Contractor's Each 113.59
plastic cane as per IS 5378
171370 Supply of boat with boatman on hire in day time up Each 814.79
to 8 hours.(minimum capacity of the boat to be 6
adult men)
171380 Supply of boat with boatman on hire in night time Each 1222.48
upto 8 hours. (minimum capacity of the boat to be 6
adult men)
171390 Double bamboo mat walling with split bamboo Sqm 154.11
reepers average dia 7.5 cm on both sides, both
ways at 45 cms centres including nails and erection
complete

Cement
Qty.(qtl.)
171400 Supplying bullock cart on hire with 2 bullocks and Each 693.03
one cartman per day of 8 Hours (Including all
consumables etc.)
171410 Selection of suitable site for drilling bore well/tube Each 695.51
well by electrical resistivity method for all diameters
171420 Supplying, fitting, fixing & installing including boring Each 46729.06
of 40 mm dia hand tube well assembly India Mark
II having total depth of 50 metres with the following
components as per IS:9301 : i) Hand pump (single
acting) India mark - II galvanised as per IS : 9301
- 90. ii) Brass strainer mesh type made of long
slotted medium B class G.I. pipes with 80-mesh
brass wire net wrapping around the perforated pipe
and jacketed by 26 / 28 SWG brass perforated
sheet. 40 mm dia (2 lengths of each 1.83 m
connected with G.I. socket). iii) C.I. cylinder with
G.M. parts India mark - II 65 mm dia x 0.45 m long
as per IS: 9301 - 90. iv) G.I. casing pipe 100 mm
dia medium quality ISI marked 18 m long. contd...
contd..... v) G.I. pipe 40 mm dia medium quality
ISI marked 28.35 m long. vi) 32 mm dia G.I. pipe
(riser) medium quality ISI marked 17 m long. vii)
12 mm dia bright bar electro galvanised connecting
rod, 3.0 m long each as per IS : 9301 of length as
required. viii) all accessories as per IS: 9301 -90
such as G.I. reducing socket 100 mm x 40 mm, C.I.
plug cutter 40 mm, base plate, M.S. nuts & bolts
etc. The work also includes priming, development
and testing of the yield (which should be sufficient
enough) for seven days with all labour, material,
tools and plants complete. ix) 40 mm dia G.I. ISI
marked medium quality hanging pipe to the extent
of 17 m. x) all accessories such as C.I. plug cutter
40 mm, base plate, M.S. nuts & bolts etc. as
required . The work also includes priming &
development and testing of the yield (which should
be sufficient enough) for seven days with cost of
labour and material, all tools and plants complete in
all respect
171430 Extra / Less for sinking including drilling, supplying, metre 822.98
fitting, fixing & installing of G.I. casing pipe 100
mm dia medium ISI marked over 18 m
171440 Extra / Less for sinking, supplying, fitting, fixing & Each 317.50
installing of G.I. riser pipe 32 mm dia medium ISI
marked over 17 m

Cement
Qty.(qtl.)
171450 Supplying, boring, sinking & installation of 40 mm Each 40770.68
dia hand tube well pump assembly having total
depth of 50 metres with the following components
as per IS:9301 : i) Double guided head stroke / 80
mm x 40 mm deep tubewell hand pump No. 6 of
complete. ii) Brass strainer mesh type “Dinco” or
equivalent made of long slotted medium B class G.I.
pipes with 80-mesh brass wire net wrapping around
the perforated pipe and jacketed by 26 / 28 SWG
brass perforated sheet. 40 mm dia- 2 lengths each
of 1.83 m connected with G.I. socket. iii) All brass
cylinder 65 mm dia 450 mm long with brass
plunger, plunger rod socket, all brass poppet/lower
valve bucket leather complete. iv) G.I. Casing pipe
ISI marked 80 mm dia medium quality 18 m long.
v) G.I. pipe ISI marked 40 mm dia medium quality
28.35 m long. vi) 80 mm x 40 mm dia G.I.
Reducing socket of approved quality. vii) 12 mm dia
bright bar electro galvanised connecting rod "Dinco"
/ "BJH" or equivalent, 3.0 m long each with G.I.
coupling of length as required at site of work
fitting, fixing & installing of G.I. casing pipe 80 mm
dia medium ISI marked over 18 m
fitting, fixing & installing of G.I. riser pipe 40 mm
dia medium ISI marked over 17 m
171480 Extra for providing Stainless Steel cylinder 65 mm Each 232.30
dia. instead of all brass cylinder
171490 Supplying, Sinking & installation of 40 mm hand Each 21255.33
pump No.6 ordinary hand pump set comprising the
following of approved quality complete assembly
having depth of 30 M as per IS:9301. Hand pump
No.6 with plunger, barrel, handle, head, piston rod,
leather bucket, base, valve weight G.I. Screws,
bolts & nuts as per IS : 1363/1967, leather seat
valve, 40 mm dia C.I. Cutter with steel plug, 40 mm
dia G.I. Sockets & 40 mm dia G.I. Pipe medium
quality v) Brass strainer mesh type “Dinco” or
equivalent made of long slotted medium B class G.I.
pipes with 80-mesh brass wire net wrapping around
the perforated pipe and jacketed by 26 / 28 SWG
brass perforated sheet. 40 mm dia x 2 lengths each
of 1.83 m connected with G.I. socket
171500 Extra for providing the following type of strainer
instead of Brass strainer mesh type
171501 Brass jacketed strainer 40 mm dia x 1.83 m long Each 1181.40
171502 Low Carbon Galvanised (LCG) jacketed strainer 40 Each 389.88
mm dia x 1.83 m long
171503 Stainless steel jacketed strainer 40 mm dia x 1.83 Each 595.08
m long
171510 Supplying, fitting & fixing in position extra strainer
40 mm dia & 1.83 m long including drilling

Cement
Qty.(qtl.)
171511 Brass jacketed strainer Each 1456.28
171512 Low Carbon Galvanised (LCG) jacketed strainer Each 1060.52
171513 Stainless steel jacketed strainer Each 1163.11
171514 Brass strainer mesh type Each 517.71
171520 Drilling of bore well for specified depth in all types
of soil and rock mechanically with all contractor’s
tools, plants, material and labour up to 75 meters
171521 For 150 mm dia metre 205.70
171522 For 200 mm dia metre 432.37
171523 For 250 mm dia metre 518.84
171524 Extra over 75m drilling for 150mm dia metre 41.14
171530 Providing supplying, lowering and fixing in bore
G.I.B Class perforated casing pipe 6 mm thickness
up to specified depth below ground level with all
contractor’s tools, plants, material and labour etc.
complete
171531 100 mm internal pipe metre 902.65
171540 Providing supplying, lowering and fixing in bore
unperforated MS casing pipe 6 mm thickness up to
specified depth below ground level with all
contractor’s tools, plants, material and labour etc.
complete
171550 Extra for using slotted or perforated MS casing pipe
171560 Providing, supplying and fixing mild steel plug or
screw cap of standard make on top of casing pipe on
completed bore as directed by Engineer-In-Charge
171561 100mm dia Each 80.26
171562 150mm dia Each 116.27
171563 200mm dia Each 163.89
171570 Extracting G.I. Pipe 40/32 mm dia including
strainers and depositing the same to the stores
171571 Upto 50 metre deep metre 36.49
171572 More than 50 metre deep metre 56.70
171580 Taking out hand tube well pump or hand pump Each 668.87
including head, handle, plunger, G.I. hanging pipe,
cylinder, connecting rod etc. and depositing the
same in the stores
171590 Supplying & fixing sun control film of approved Sqm 332.27
quality and make over door/window/clery storey
window

Cement
Qty.(qtl.)
171600 Providing, driving and installing driven cast-in-situ
reinforced cement concrete piles M 35 grade to
carry safe working load not less than specified,
including the cost of shoe and pile to be embedded
in the pile cap as a complete job. Payment for steel
reinforcement & cement will be made extra. Length
of pile for payment shall be measured from top of
shoe to the bottom of pile cap
171601 400mm dia piles metre 1626.26 0.537 or as
per desgin
mix
per desgin
mix
per desgin
mix
per desgin
mix
171610 Boring, providing and installing bored cast-in-situ
reinforced cement concrete pile of all length M 35
grade to carry a safe working load not les than
specified incl. cost of boring with bentonite solution
and temporary casing of appropriate length for
setting out and removal of same and pile to be
embedded in the pile cap etc all incl. removal of
excavated earth with all lifts and leads. Length of
pile for payment shall be measured upto bottom of
pile cap. Payment for steel reinforcement & cement
will be made separately
per desgin
mix
per desgin
mix
per desgin
mix
171614 500mmdia piles metre 1687.02 0.840 or as
per desgin
mix
171615 600mm dia piles. metre 2050.57 .1.209 or as
per desgin
mix
171620 Boring, providing and installing cast-in-situ single
under reamed piles with bulb dia of 2.5 times the
pile dia of any length in M 35 grade to carry a safe
working load not less than specified including cost
of boring with bentonite solution and pile to be
embedded in pile cap etc all complete. Length of
pile for payment shall be measured upto the bottom
of pile cap. Payment for steel reinforcement &
cement will be made separately

Cement
Qty.(qtl.)
per desgin
mix
per desgin
mix
per desgin
mix
per desgin
mix
171630 Extra over item above for providing additional bulb
in double under reamed piles (only the quantity of
extra bulbs to be paid)
171631 300mm dia piles Each 1196.49 0.141
171632 400mm dia piles Each 1208.34 0.270
171633 450mm dia piles Each 1216.24 0.347
171634 550 mm dia piles Each 1282.21 0.437
171640 Providing, driving and installing Pre-cast reinforced
cement concrete piles of any length in M 35 grade
to carry safe working load not less than specified
with central through preformed hole with M.S. black
pipe of dia 40mm for grouting with cement sand
grouting of mix 1:2 (1cement: 2coarse sand) under
sufficient positive pressure to ensure complete
filling including centring, shuttering, driving and
removing the steel casing pipe and lifting casing etc.
complete Length of pile for payment shall be
measured from to of the shoe to the bottom of pile
cap. Payment for steel reinforcement & cement will
be made separately. (piles to be casted at site)
171641 400mm dia. metre 1415.66 0.621
171642 450mm dia. metre 1283.37 0.784
171643 500mm dia. metre 1283.37 0.959
171644 550mm dia. metre 1283.37 1.168
171650 Vertical load testing of piles in accordance with IS:
2911 (Part IV) including installation of loading
platform and preparation of pile head or
construction of test cap and dismantling of test cap
after test etc. complete as per specification and the
direction of Engineer-in-Charge
171651 Single pile upto 50 tonne capacity- initial test Each 33460.88
Test
171652 Single pile upto 50 tonne capacity - routine test Each 20219.78
Test
171653 Single pile above 50 tonne and upto 100 tonne Each 47282.73
capacity - initial test Test
capacity - routine test Test
171660 Group of two or more piles (each pile capacity upto
50 tonne)
171661 Initial test Each 63311.43
Test

Cement
Qty.(qtl.)
171662 Routine test Each 39278.06
Test
171670 Cyclic vertical load testing of pile in accordance with
IS Code of practice IS: 2911 (Part IV) including
preparation of pile head etc. for.
171671 Single pile upto 50 tonne capacity Each 20219.78
Test
capacity Test
171673 Group of two or more piles (each pile capacity upto Each 39278.06
50 tonne) Test
171680 Lateral load testing of single pile in accordance with
I.S. Code of practice IS: 2911 (Part IV) for
determining safe allowable lateral load on pile
171681 Vertical load capacity upto 50 MT Each 20219.78
Test
171682 Vertical load capacity above 50 tonne and upto 100 Each 32405.85
tonne Test
171690 Providing & applying Pre-Construction Anti-Termite Sqm 72.99
treatment to proposed structure, with application of
Imidacloprid 30.5% SC @ o.075% concentration
mixed with water in ratio of 1:475, as per detailed
specifications given in Indian Railways Standard
Specifications, so as to create a chemical barrier
below and around the structure by an approved
agency. (Plinth Area/Basement floor area shall be
considered for Payment)
171700 Post-construction anti-termite treatment to Sqm 62.66
structures with application by trenching, drilling
holes, injecting of Imidacloprid 30.5% SC @
0.075% concentration mixed with water in ratio
1:475 alongwith spraying of woodwork with
termiseal (oil based approved termiticide), as
detailed in Indian Railways Standard Specifications,
so as to create a chemical barrier below and around
the structure by an approved professional agency.
(Built-up area shall be considered for payment)
171710 Providing Rodent Management Service to Sqm 7.79
colonies/stations/ offices/yards/rest house etc. by
application of Bromadiolone Bait and closing of
burrows alongwith monitoring fortnightly for one
year, as per specifications given in Indian Railways
Standard Specifications complete job including
placing of rodent bait station boxes, traps etc. and
removal of dead/trapped rodents. (The payment
shall be released in twelve equal installments)

Cement
Qty.(qtl.)
171720 Providing general pest control service in colonies, Sqm 50.98
offices, rest houses etc. to eliminate cockroaches,
red and black ants, silver fish by applying cockroach
gel (pyrethrum extract) and Deltamethrin Chemical
repeated quarterly for one year as per specifications
mentioned in Indian Railways Standard
Specifications. (Payment to be released in four
quarterly installments)
172010 Supplying and applying leak proof polygrout to stop Each 911.02
oozing water, with the help of NBMs threaded
nozzles complete job including fixing of nozzles,
injecting polygrout and sealing of nozzles with the
help of sealing compound
172020 Supplying, erecting and fixing precast concrete Each 8602.49
reinforced bench with back rest. Bench shall consist
of 2 nos. L shaped base support in natural cement
colour of thickness 100 mm, back height 1000 mm,
front height 450 mm, base width 620 mm and 5
nos. reinforced concrete planks in red colour and
size of 1500 x 100 x 50mm and 1 no. reinforced
concrete plank of 150 x 200 x 50mm; manufactured
by using M-30 grade concrete & reinforced suitably;
all parts to be joined with galvanised nuts and bolts
of suitable size. All bolts to be sealed after
assembly. Complete job to be done as per directions
of Engineer Incharge
172030 Providing and fixing glazed or unglazed full body Sqm 957.80 0.087
homogenous anti-algal, all weather resistant
ceramic landscaping/facia vitrified tiles (Cladding),
conforming to tests as per IS:4457-2007, having
water absorption < 0.5%, having sizes as 300mm x
300mm x 8mm, 200mm x 400mm x 9mm, 400mm
x 400mm x 9mm and 300mm x 600mm x 10mm &
240mm x 60mm x 7.3mm in approved shade, colour
& quality. Tiles to be laid on 20 mm average thick
cement mortar bed of 1:4 (1 cement : 4 coarse
sand) and joints filled with polymer based
cementitious grout with all labour, material
complete job
172040 Fabricating, supplying and installing stainless steel Kg 584.24
3/4 seater benches with or without back rest of size
and shape as per design and drawing approved by
Engineer Incharge. Bench shall be manufactured
from stainless steel 304 Grade with perforation
made with turret punching machine and rolled on
roller machine. Steel to be either laser cut or water
jet cut (no shearing). Polishing to be done with
automatic polishing machines to give mirror polish.
All parts to be connected with suitable CNC made
connectors and counter sunk screws etc. .. Contd. --

Cement
Qty.(qtl.)
.. Contd. --Welding to be done with suitable SS 304
Grade welding rods and treated with K-2 solution.
Joints shall be finished ensuring that no welding
marks are visible. Fixing at site should be done with
suitable SS base plate and dash fasteners.
Manufacturer shall submit maintenance manual and
basic material test report for grade certification.
172050 Extra over item 172040 for using SS 316 Grade Kg 98.73
stainless steel (to be used in corrosive coastal
areas) instead of SS 304 Grade
173010
173020
173030
173040
173050

IR's Unified Standard Schedule Of Rates 2010 Chapter-18 : Dismantling And Demolishing
CHAPTER - 18 : DISMANTLING AND DEMOLISHING
CONCRETE
181010 Demolishing lime concrete and disposal of material within cum 155.64
50m lead
181020 Demolishing plain cement concrete including disposal of
material within 50m lead
181021 1:2:4 or richer mix with max. 20 mm coarse aggregate cum 451.85
181022 Mix leaner than 1:2:4 with coarse aggregate larger than cum 276.70
20mm
181023 Dismantling concrete kerb stones/rail level platform cum 463.96
stones /concrete beams / slabs or similar light structural
parts/ stones without appreciable damage including
181030 stacking
Demolishing R.C.C. work including cutting and stacking of cum 664.95
steel bars and disposal of unserviceable material within
50m lead. (Extra payment for scraping, cleaning and
straightening of bars to be made separately)
181040 Extra over Item Nos. 181021 and 181050 if pavement cum 199.48
breaker is used on orders of Engineer
181050 Demolishing R.B work including stacking of steel bars and cum 589.58
disposal of unserviceable material within 50m lead (Extra
payment for scraping, cleaning and straightening of bars
to be made separately)
181060 Extra for scraping, cleaning, straightening reinforcement Kg 1.76
from R.C.C. or R.B. work
MASONRY
182010 Demolishing brick work including stacking of serviceable

material and disposal of unserviceable material within
50m lead
182011 In mud mortar cum 127.83
182012 In lime mortar/ lime cinder mortar cum 155.64
182013 In cement mortar cum 376.48
182020 Extra for removing mortar from bricks and cleaning bricks
(stacks of cleaned bricks shall be measured)
182021 From brick work in mud mortar 1000 nos. 849.85
182022 From brick work in lime mortar/ lime cinder mortar 1000 nos. 982.52
182023 From brick work in cement mortar 1000 nos. 1227.88
182030 Demolishing stone rubble masonry including stacking of
serviceable material and disposal of unserviceable
182031 Dry masonry cum 158.95
182032 In lime mortar cum 212.21
182040 Dismantling dressed stone work, ashlar face stone work,
marble work, including stacking of serviceable and
disposal of unserviceable material within 50m lead


182050 Dismantling Precast concrete or stone slabs in walls,
partition wall etc. including stacking within 50m lead
182051 Thickness upto 40mm Sqm 54.40
182052 Thickness above 40mm upto 75mm Sqm 81.45
182060 Extra over basic Items for removing mortar from
stones/blocks and cleaning stones/blocks (net quantity of
stacks of cleaned materials will be measured, deduction
@15% for voids in stones will be made)
182070 Dismantling old plaster or skirting raking out joints and Sqm 10.09
cleaning the surface for plaster/pointing including disposal
of rubbish within 50m lead
FLOORING, PAVING, SKIRTING ETC.
183010 Dismantling cement concrete / terrazzo flooring and/or Sqm 15.15
underlayer excluding base concrete
183020 Dismantling tile work in floors/dado/skirting laid in Sqm 20.21
cement mortar/ chemical mortar/synthetic adhesive
including stacking material within 50m lead
183030 Dismantling stone slab flooring/ dado/skirting laid in Sqm 49.68
cement mortar/ lime mortar including stacking of
183040 Dismantling Paver block/ stone sett flooring laid in dry Sqm 39.32
mortar/ cement mortar / bitumen, including stacking
183050 Extra for cleaning the stone sets with cement mortar & 100 nos. 178.07
bitumen
183060 Dismantling including stacking of serviceable material and
disposal of unserviceable material within 50m lead
183061 Under layer of road of water bound macadam/ stone Sqm 41.46
soling etc.
183062 Bituminous top layer of road Sqm 80.60
ROOFING, TERRACING ETC.
184010 Demolishing brick tile covering (single layer) in terracing Sqm 18.77
including stacking of serviceable material and disposal of
unserviceable material within 50m lead
184020 Demolishing mud phaska in terracing and disposal of cum 163.20
184030 Dismantling stone slab roofing including all coverings over cum 662.41
wooden karries or R.C.C. battens (dismantling karries and
battens to be paid separately) including stacking of
184040 Dismantling jack arch roofing including lime/cement Sqm 46.50
concrete in haunches and floors including cleaning and
stacking of serviceable material and disposal of
unserviceable material within 50m lead - plan area to be
measured

184050 Dismantling Single tiled roofing of any type with battens Sqm 39.83
boarding etc. complete including stacking of serviceable
material and disposal of unserviceable material within
50m lead
184060 Dismantling Double layer tiled roofing of any type with Sqm 69.48
battens boarding etc. complete including stacking of
184070 Dismantling ridges, hips valleys and gutters etc of any metre 5.38
material and stacking the material within 50m lead
184080 Dismantling roofing including ridges, hips valleys and
gutters etc. and stacking the material within 50m lead of
184081 G.I. sheet sqm 30.98
184082 Asbestos sheet sqm 14.68
WOOD WORK & PANELLING ETC.
185010 Dismantling doors, windows and clerestory windows (steel Each 92.50
or wood) shutter including chowkhats, architrave,
holdfasts in CC or masonry etc. complete and stacking
within 50m lead
185020 Taking out doors, windows, clerestory window, cupboard Each 35.39
shutters only (steel or wood) including stacking within
50m lead
185030 Dismantling wood work in frames, trusses, purlins and
rafters/reepers including stacking the material within 50m
lead
185031 Of sectional area 40sqcm and above cum 826.28
185032 Of sectional area below 40sqcm cum 930.65
185040 Dismantling wooden trellis work excluding frames but sqm 11.84
including stacking the serviceable material within 50m
185050 lead
Dismantling wooden ballies in posts and struts including metre 3.81
cutting if required and stacking within 50m lead
185060 Dismantling wooden boarding in lining of walls and
partitions, sunshades etc excluding supporting members
but including stacking within 50m lead
185061 Upto 10mm thick sqm 11.32
185062 Thickness above 10mm upto 25mm sqm 14.42
185070 Taking out existing plywood (including laminations if any) Sqm 17.33
of any thickness from door, windows partitions, boards,
furniture etc including fittings as beading and borders
including stacking.
185080 Taking out existing broken glass panes from existing door, sqm 43.97
windows, partitions etc. including stacking/disposal
185090 Taking out existing laminated sheets (Sunmica etc.) from sqm 13.71
doors, windows, partitions boards etc.
STEEL WORK
186010 Dismantling steel work in single sections including

dismembering & stacking within 50m lead in
186011 R.S. joists./ Rails Kg 0.62
186012 Channels, angles, tees and flats/ rounds or any other Kg 0.45
rolled shape.

186020 Dismantling steel work and trusses upto 10m span and Kg 1.04
5m height in built up sections in angles, tees, flats and
channels including all gusset plates, bolts, nuts, cutting
rivets, welding etc. including dismembering and stacking
within 50m lead
186030 Dismantling steel work and trusses upto 10m span and Kg 0.72
upto 5m height (height of lowest member from ground) in
built up sections and stacking within 50m lead
186040 Extra over item 186020 & 186030 for dismantling trusses, Kg 0.16
rafters, purlins etc. of steel work for additional span
length of one metre or part thereof beyond 10m
186050 Extra over item 186030 & 186040 for dismantling trusses, Kg 0.16
rafters, purlins etc. of steel work for additional height of
one metre or part thereof beyond 5m
186060 Extra for marking of structural steel work required to be Kg 0.85
re-erected
186070 Dismantling pressed steel tanks, excluding staging, sqm 62.55
including stacking within a lead of 50m
186080 Dismantling, iron collapsible gate, rolling shutter, M.S. sqm 41.57
Grill, M.S. Gates, Palisade fencing etc.with post & stays
including stacking of serviceable materials and disposal of
unserviceable materials within 50 m lead
186090 Taking out rail posts of any height and stacking within Each 61.95
50m. (Demolishing of concrete/masonry, if required to be
done, will be paid extra)
FENCING
187010 Dismantling and stacking within 50m lead, fencing posts

or struts/ rails including all earth work and dismantling of
concrete etc. in base
187011 ‘T” or ‘L’ iron or pipe, rail or RSJs Each 50.91
187012 R.C.C. / Stone Each 61.24
187020 Dismantling barbed wire or flexible wire rope in fencing Kg 7.01
including making rolls and stacking within 50m lead
SANITARY AND WATER SUPPLY ITEMS
188010 Dismantling asbestos cement pressure pipes/ Non metre 60.14

pressure pipes upto 150mm dia including excavation and
refilling trenches after taking out the pipes and stacking
the pipes within 50m lead
188020 Dismantling G.I. /PVC pipes (external work) including
pipes, including stacking of pipes within 50m lead
188021 Upto 40mm dia metre 29.23
188022 Above 40mm dia metre 33.40
188030 Dismantling rain water pipe of G.I, C.I, M.S, SCI, asbestos
or PVC with fittings and clamps, including stacking the
188031 Dia of 80mm and below metre 13.78
188032 Dia of above 80mm metre 14.22
188040 Dismantling of flushing cistern of any size including Each 180.74
stacking of serviceable materials and disposal of
unserviceable materials within 50m lead

188050 Dismantling of C.I. sluice and similar valves including

stacking of serviceable materials within a lead of 50m
188051 Upto 150mm diameter Each 64.85
188052 Above 150mm diameter Each 226.94
188060 Dismantling of spindle fire hydrant including stacking of Each 136.09
serviceable materials within 50m lead
188070 Taking out earthenware or stoneware/concrete pipes and
stacking within 50m lead including excavation of trench
and refilling and ramming complete. (Demolishing of
concrete/masonry if required to be done will be paid
188071 extra)
Upto 15 cm dia. metre 6.92
188072 Above 15 cm dia upto 30cm dia. metre 8.87
188073 Above 30cm dia. metre 10.89
MISCELLANEOUS ITEMS
189010 Dismantling sleeper huts complete with roof and flooring sqm 68.04
etc.
189020 Dismantling expanded metal, BRC, IRC, welded mesh or sqm 14.12
similar materials incl. beading and stacking the
serviceable material within 50m lead
189030 Dismantling cement asbestos, Celotax or other hard board sqm 10.71
ceiling or partition wall, sunshades etc including stacking
of serviceable materials and disposal of unserviceable
materials within 50metres lead
189040 Dismantling gypsum partitions including framework sqm 12.24
(Aluminium/steel),and false ceiling including stacking of
189050 Dismantling hessian cloth or similar textile covering from sqm 5.31
ceiling or walling etc.
189060 Removing thatch only with binding materials including
underlayer matting, from roof. including stacking within a
lead of 50 m
189061 Upto 150mm thick sqm 5.44
189062 Above 150 mm thick sqm 6.18
189070 Removing tar felts or bitumen felts (Any no of layers) sqm 10.35
from roofs parapets etc including disposal by burning.
189080 Dismantling of old S.W. pipes including breaking of joints
and partial bed concrete (Brick or stone) as required,
stacking of useful material near the site within 50m lead
and disposal of unserviceable material into municipal /
Railway dumps
189081 100mm diameter metre 30.59

189090 Dismantling of manhole including R.C.C. top slab, C.I.

cover with frame including stacking of useful material
including bricks duly cleaned from mortar near the site
and disposal of unserviceable materials into railway
dumps within 50m lead including all excavation, refilling
watering and ramming etc. complete
189091 Rectangular manhole 90x80cm (Inside dimensions) and Each 719.58
45cm deep.
189092 Rectangular manhole 120x90cm (Inside dimensions) and Each 1316.81
90cm deep
189093 Rectangular arch type manhole 140x90cm (Inside Each 3411.29
dimensions) and 2.45m deep
189094 Circular manhole 122cm diameter (Inside dimensions) Each 4654.06
and 1.68m deep
189100 Extra for depth of manholes dismantled for :
189101 Rectangular manhole 90x80cm (Inside dimensions) and 10 cm 16.11
45cm deep.
189102 Rectangular manhole 120x90cm (Inside dimensions) and 10 cm 120.77
90cm deep
189103 Rectangular arch type manhole 140x90cm (Inside 10 cm 130.06
dimensions) and 2.45m deep
189104 Circular manhole 122cm diameter (Inside dimensions) 10 cm 262.54
and 1.68m deep
189110 Taking out European or Indian type WC, Squatting plate Each 117.31
Complete with all parts including making good the walls
complete, if required
189120 Taking out Wash hand basin and sink complete with all Each 134.51
parts including making good the walls complete, if
required
189130 Taking out flat back or angular lipped urinal basin. Each 114.08
Complete with all parts including making good the walls
complete, if required
189140 Taking out Squatting Urinal plate Complete with all parts Each 122.94
including making good the walls complete, if required
189210
189220
189230
189240
189250
189260
189270
189280
189290
189300

IR's Unified Standard Schedule Of Rates 2010 Chapter-19 : Bridge Works-Substructure
CHAPTER - 19 : BRIDGE WORKS - SUBSTRUCTURE
Cement
Qty.(qtl.)
191010 Exploratory drilling of Boreholes down to
required depth, drilling of 150mm diameter
boreholes in all type of soils except hard rock
and large boulders (boulder core more than 30
cm), including refilling and reinstating surface,
and disposing off surplus material including use
of mechanical rigs with power operated winches
as well as percussion / chieselling tool for
advancing through occasional seams of hard
strata to be employed, where necessary in Dry
area
191011 0m to 10m metre 1161.50
191012 10m to 20m metre 1277.65
191013 20m to 30m metre 1393.80
191014 30m to 40m metre 1451.88
191015 40m to 50m metre 1533.18
191016 50m to 60m metre 1626.10
191017 60 m to 70 m metre 1742.25
191020 Exploratory drilling of Boreholes down to
required depth, drilling of 150mm diameter
boreholes in all type of soils except hard rock
and large boulders (boulder core more than 30
cm), including refilling and reinstating surface,
and disposing off surplus material including use
of mechanical rigs with power operated winches
as well as percussion / chieselling tool for
advancing through occasional seams of hard
strata to be employed where necessary in River
bed area including standing/flowing water up to
2 M depth with all necessary arrangements
191021 0m to 10m metre 3019.90
191022 10m to 20m metre 3252.20
191023 20m to 30m metre 3368.35
191024 30m to 40m metre 3484.50
191025 40m to 50m metre 3600.65
191026 50m to 60m metre 3716.80
191027 60 to 70 M metre 3949.10
191030 Extra for 150mm dia bore in hard Rock/ large metre 5226.75
Boulder at all levels
191040 Drilling of NX size borehole (75 mm dia) in all
types of hard rock (fresh rock) and collection of
rock core samples from boreholes and
preserving in boxes
191041 0m to 10m metre 3484.50
191042 10m to 20m metre 3716.80
191043 20m to 30m metre 3949.10
191044 30m to 40m metre 4413.70
191045 40m to 50m metre 4646.00

Cement
Qty.(qtl.)
191046 50m to 60m metre 4878.30
191047 60 m to 70 m metre 5110.60
191050 Conducting in situ full size Plate load test (PLT)
at selected location as per IS: 1888 including
making loading arrangements & casting of
RCC/cast in situ concrete footing as per codal
provisions including excavation and refilling of
trial pit
191051 a. Plate size 30 cm x 30 cm Each 18584.00
191052 b. Plate size 45 cm x 45 cm each 20907.00
191053 c. Plate size 60 cm x 60 cm Each 29037.50
191060 Conducting in situ Vane shear test for soil as Each 1858.40
per IS 4434
191070 Conducting SCPT for soil as per IS - 4968 Each 40652.50
191080 Conducting DCPT for soil as per IS - 4968 Each 34264.25
191090 Conducting determination of California Bearing Each 3484.50
Ratio as per IS 2720
191100 Taking out 100mm dia & 450mm long Each 116.15
undisturbed samples of soil from bore holes,
including provision of air tight containers for
packing and, labelling incl. transporting the
samples to laboratory. Piston sampler shall be
used for extracting undisturbed samples where
necessary. Samples shall be collected as per IS
2720
191110 Taking out 100mm dia & 450mm long disturbed Each 116.15
samples of soil from bore holes, including
provision of air tight containers for packing,
labelling and transporting the samples to
laboratory. Samples shall be collected as per IS
2720
191120 Conducting standard penetration test as per IS Each 174.23
2131 at approximate1.5 m intervals in bore
holes, as directed by the Engineer in charge
191130 Collection of water samples at required intervals Each 174.23
191140 Conducting laboratory Tests on collected soil
samples as per relevant IS code
191141 Moisture contents/ Dry density Each 290.38
191142 Atterberg Limit Each 696.90
191143 Specific Gravity Each 309.73
191144 Grain size analysis including Hydrometer Each 569.14
analysis
191145 Direct Shear Test Each 2293.96
191146 Natural density Each 309.73
191147 Consolidation test Each 2323.00
191148 Unconfined compression test Each 2323.00
191149 Tri-axial test Each 2323.00
191150 Conducting Laboratory tests on collected ROCK
SAMPLES as per relevant IS code
191151 Density test Each 387.17
191152 Water absorption & Porosity Each 290.38
191153 Hardness Each 348.45
191154 Unconfined compression test Each 1858.40

Cement
Qty.(qtl.)
191155 Point load test Each 1393.80
191156 Modulus of elasticity Each 6039.80
191157 Abrasion testing Each 2323.00
191160 Conducting chemical analysis of ground water Each 2903.75
samples to determine suitability for concreting
and aggressiveness in relation to attack on
concrete / reinforcement including
determination of pH value
191170 Conducting chemical analysis of soil samples to Each 3891.03
determine aggressiveness in relation to attack
on concrete / reinforcement including
determination of pH value
191180 Preparation and submission of Final report Each 66786.25
giving complete and comprehensive record of
investigations, laboratory test reports and
calculations in approved format
OPEN FOUNDATION
192010 Earth work in excavation for foundations and

floors of the bridges, retaining walls etc.,
including setting out, dressing of sides,
ramming of bottom, getting out the excavated
material, back filling in layers with approved
material and consolidation of the layers by
ramming and watering etc. incl. all lift, disposal
of surplus soil upto a lead of 300 M, all types of
shoring and strutting with all labour and
material complete as per drawing and technical
specification as directed by Engineer in charge
192011 All kinds of soils cum 281.19
192012 Ordinary rock cum 263.27
192013 Hard rock ( requiring blasting) cum 380.40
192014 Hard rock ( blasting prohibited ) cum 560.80
192020 Extra for the quantity of works, executed in or cum 20% of Basic
underwater and/ or liquid mud including Items
pumping out water as required
192030 Providing and laying Plain Cement Concrete cum 1330.71 2.200
1:3:6 with graded stone aggregate of 40 mm
nominal size, in foundation and floors, retaining
walls of bridges including mechanical mixing,
vibrating, pumping and bailing out water
where ever required with all materials and
labour complete but excluding the cost of
cement and shuttering as per drawings and
technical specifications as directed by Engineer

Cement
Qty.(qtl.)
192040 Providing and laying in position machine mixed, cum 1622.40 4.22 Or as
machine vibrated and machine batched Design per appd
design mix.
Mix Cement Concrete M35 grade (Cast - in Situ)
using 20 mm graded crushed stone aggregate
and coarse sand of approved quality in RCC raft
foundation & Pile cap including finishing, Using
Admixtures in recommended proportions ( as
per IS 9103), if approved in Mix design to
accelerate or retard setting of concrete and/or
improve workability without impairing strength
and durability complete as per specifications
and direction of the Engineer in charge.
Payment for cement, reinforcement and
shuttering shall be paid extra
192050 Providing and laying in position machine mixed, cum 1622.40 3.44 Or as
design mix.
and coarse sand of approved quality in
Abutment, pier, wing walls and return walls of
Mass cement concrete above RCC raft Including
finishing complete as per specifications and
direction of the Engineer in charge. Payment
for cement, reinforcement and shuttering shall
be paid extra
192060 Providing and laying in position machine mixed,
machine vibrated and machine batched Design
and coarse sand of approved quality for the
following Reinforced cement concrete structural
elements up to height of 10 M from foundation
top level, including finishing, Using Admixtures
in recommended proportions ( as per IS 9103),
if approved in Mix design to accelerate or retard
setting of concrete and/or improve workability
without impairing strength and durability
complete as per specifications and direction of
the Engineer in charge. Payment for cement,
reinforcement and shuttering shall be paid extra
192061 Abutment & Pier cum 1602.80 4.22 Or as
per appd
design mix.
192062 Wing wall and Return wall cum 1679.13 4.22 Or as
per appd
design mix.
192063 Abutment cap, Pier Cap, Inspection Platform & cum 1755.45 4.22 Or as
Pedestal over Pier cap, Fender wall, Diaphragm per appd
design mix.
wall, etc.
192064 Approach slab at formation level, Dirt wall/ cum 1831.78 4.22 Or as
ballast wall at formation level per appd
design mix.

Cement
Qty.(qtl.)
192065 Extra for every increase of 1 M or part thereof in cum/m 11.30 4.22 Or as
the height above 10 M & 20 M height per appd
design mix.
192070 Providing, Driving and installing Bored cast in
situ Reinforced Cement Concrete piles of
specified diameter and length below pile cap in
M- 35 grade Design Mix Cement Concrete ,
and coarse sand of approved quality, to carry a
safe working load not less than specified,
excluding the cost of casing pipe but including
the cost of shoe and length of pile to be
embedded in pile cap etc complete, concreting
by machine batching, machine mixing,
scaffolding, using Admixture in recommended
proportion( as per IS 9103), if approved in
design Mix, placing with tremie pipe, chipping
off of pile top to remove laitance concrete above
cut off level etc, pumping and bailing out water,
with all labour material complete including
crossing of tracks if required, as per approved
drawing, specification and direction of the
Engineer in charge. Length of the pile for
payment shall be measured Up to the bottom of
pile cap excluding the mud mat. Payment for
cement, casing pipe & reinforcement shall be
paid extra
192071 1500mm diameter metre 15522.49 7.561 Or as
per appd
design mix.

per appd
design mix.
per appd
design mix.
per appd
design mix.
per appd
design mix.
192080 Providing, fabricating and installing of casing MT 50009.56
pipe for bored piles for all diameters with
specified thickness of steel plate including all
labour, materials, pumping and bailing out
water where ever required, complete as per
in charge. This will include the weight of plate
only and no cognizance will be given for the
fittings i.e. rivets and welding etc.

Cement
Qty.(qtl.)
192090 Extra for chieselling in addition to boring of
piles if chieselling is resorted to in hard rock or
big stone boulders larger than 30 cm depth by
any means i.e. by chiesel or manual chiesel and
hammer method
192091 1200mm Diameter pile metre 1266.03
192092 1000mm Diameter metre 771.13
192100 Conducting load testing of a single pile Up to
following capacity in accordance with IS
2911(Part IV) including installation of loading
platform and preparation of pile head or
construction of test cap and dismantling of test
cap after test etc with all labour, material, tool
& plants, equipment, machinery, etc complete
as per drawing and specification, as directed by
the Engineer
192101 Initial load test Up to 50 ton capacity pile Each 34140.36
192102 Initial load test above 50 ton capacity Up to 100 Each 48240.97
ton capacity pile
192103 Initial load test above 100 ton capacity Up to Each 59817.25
250 ton capacity pile
192104 Extra for every increase of 50 T in pile capacity Each 8972.59
or part thereof over 250 T
192105 Routine Load Test Up to 50 ton capacity pile Each 20620.50
192106 Routine Load Test above 50 ton capacity Up to Each 31871.56
192107 Routine Load Test above 100 ton capacity Up to Each 48451.97
192110 Lateral load testing of single pile in accordance
with “IS Code of practice IS: 2911 (Part IV) for
determining safe allowable lateral load of pile”
with all labour, material, tool & plants,
equipment, machinery, etc complete as per
drawing and specification as directed by the
Engineer
192111 Piles with lateral load capacity of Up to 10 ton Each 20620.50
192112 Piles with lateral load capacity of above 10 ton Each 33033.06
& Up to 20 ton
192113 Piles with lateral load capacity of above 20 ton Each 56225.96
192120 Pulse Echo Test (PET) for integrity testing of Each 59817.25
piles with contractor’s men, materials and
machines. The rate includes cost of Inspection
of site, preparation of pile head and any other
unforeseen cost required for the test,
submission of reports in triplicate as per
satisfaction of the Engineer in Charge at site
WELL FOUNDATION

Cement
Qty.(qtl.)
193010 Earth work in OPEN excavation in foundation of cum 102.76
bridges, for placing of well curbs of all shapes
and designs in all kinds of soil including taking
out the excavated soil, levelling, ramming of
bottom of excavation and trimming of sides,
returning the soil in layers, consolidation,
disposal of surplus soil within a lead of 300 M,
incl. all lift, dewatering, shoring and strutting
complete as per technical specification and as
directed by Engineer in charge. (The compaction
of surplus soil when led to the bank will be paid
as per relevant item separately)
193011 Extra to item for Earth work in excavation over cum 158.90
item no. 193010 if the excavation is carried out
in Rock not requiring blasting
193012 Extra for Earth work in excavation over item cum 292.54
193010 if the excavation is carried out requiring
controlled blasting or chieselling where required
and permitted by the engineer in charge
193020 Providing and constructing Temporary Earthen
Island / coffer dam for construction of well
foundations, including bailing and pumping out
of water, provision of sand bags, wooden
ballies, sheet piling, earth, sand or any other
suitable material, in water depth upto 1.5m, as
required with all labour and material complete
job
193021 For well size (longest dimension) upto 10 M Each 20423.97
193022 For well size (longest dimension) above 10 M Each 133541.81
193030 Supplying, Fabrication, assembly erection & metre 54339.22
placing in position of cutting edge of well curb
with structural steel including M.S sheet/ Plates
of specified thickness for pier/abutment
complete as per approved plans and as per
direction of Engineering In charge including all
operations like cutting, bending, straightening,
drilling holes, bolting, riveting, welding,
threading, jointing of steel sections including
outer and inner places liners and skin plates,
stiffeners, hooks bottle nuts, bond rods etc as
per design including all ascent, descents, leads,
lifts, handing, re-handling, all other obstructions
whatsoever, diverting channels, pumping /
bailing out of water and wherever required
including cost of steel such as flats, sheets,
angles, steel bars etc. with all labour and
material as a complete job

Cement
Qty.(qtl.)
193040 Dry/Wet Sinking of Circular Wells (Other than
pneumatic method) in all types of strata except
hard rock requiring ballasting, including bailing
and pumping out water, removal of excavated
soil, with all labour and material required for
sinking as per drawing and direction of the
Engineer in charge, disposal of surplus soil upto
1 Km lead in the adjoining bank/embankment
(The compaction to be paid separately under
the relevant item)
193041 From initial level of cutting edge & Up to 3m cum 83.35
depth
193042 From 3m to 10m depth cum 123.17
193044 From 20m to 30 m depth cum 398.09
193047 From 50 m depth onwards cum 6370.67
193050 Dry/Wet Sinking of Twin D type Wells (Other
than pneumatic method) in all types of strata
except hard rock requiring ballasting, including
bailing and pumping out water, removal of
excavated soil, with all labour and material
required for sinking as per drawing and
direction of the Engineer in charge including
disposal of surplus soil in the adjoining bank or
within the zone including disposal of surplus soil
in the adjoining bank or within the zone
including compaction (The compaction to be
paid separately under the relevant item)
193051 From initial level of cutting edge & Up to 3m cum 129.84
depth
193057 From 50 m depth onwards cum 10676.17
193060 Extra for sinking of wells in hard rock requiring cum 361.54
controlled blasting including cost of explosive,
detonators, chieselling including all other
ancillary works
193070 Providing and laying in position machine mixed,
machine vibrated and machine batched Design
and coarse sand of approved quality in the
following elements of well including finishing,
using Admixtures in recommended proportions(
as per IS 9103), if approved in Mix design, to
durability complete .. Contd. --

Cement
Qty.(qtl.)
.. Contd. -- as per drawings and technical
specifications as directed by Engineer. Payment
for cement, reinforcement and shuttering shall
be paid extra
193071 In well Kerb cum 1622.40 4.22 or as
per appd
design Mix.
193072 In Steining of wells cum 1622.40 4.22 or as
per appd
design Mix.
193073 In Bottom plug for wells incl. arrangements for cum 1951.23 4.22 or as
placing concrete under water with tremie or per appd
design Mix.
bottom opening skips
193074 In Intermediate/top plug without shuttering cum 1865.76 4.22 or as
per appd
design Mix.
193075 In Intermediate/Top plug with internal cum 1865.76 4.22 or as
shuttering per appd
design Mix.
193076 In Well cap and corbel if provided cum 1865.76 4.22 or as
per appd
design Mix.
193080 Supplying and filling ordinary sand/ excavated cum 491.33
river bed material, if approved in between
bottom plug and top plug in wells including all
lead lift handling, re handling, as a complete
job. The sand should be simultaneously filled
with water for three days to achieve full
compaction so that further chances of shrinkage
due to voids are eliminated. Note - If sand is
brought from a source other then bridge site it
shall be paid as NS item
RCC BOX
194010 Providing and laying in position machine mixed, cum 1622.40 4.22 or as
design Mix.
In Bottom/top slab, side walls, toe wall and
sumps haunch filling head walls or any other
component using 20 mm graded crushed stone
aggregate and coarse sand of approved quality
of cast-in-situ RCC box of size upto 5 M (bigger
inside dimension) including finishing,
Admixtures in recommended proportions (as per
IS 9103), if approved in Mix design, to
durability, complete as per drawings and
in charge. Payment for cement, reinforcement
and shuttering shall be paid extra

Cement
Qty.(qtl.)
194020 Providing and laying in position machine mixed, cum 1622.40 3.44 or as
design Mix.
Mix Mass Cement Concrete M20 grade (Cast - in
Situ) using 20 mm graded crushed stone
in Drop and curtain wall and alike structures
below bed level, Including the cost of centring,
shuttering and finishing complete as per
drawings and technical specifications as directed
by Engineer. Payment for cement &
reinforcement shall be paid extra
MISCELLANEOUS
195010 Deduct if 40mm graded stone aggregate is used cum 63.88

in place of 20mm graded stone aggregate in any
grade of concrete. (Deduction to be made for
quantity of concrete)
195020 Providing and applying two coats of coal tar or Sqm 86.15
bitumen confirming to IS 3117 - 1965 on the
top and sides of RCC box/slabs @ 1.70 Kgs /
Sqm after cleaning the surface with all labour
and materials complete job as directed by the
Engineer
195030 Centring and shuttering including strutting,
propping etc. and removal of form for :
195031 RCC raft foundation & Pile cap Sqm 128.80
195032 Abutment, pier, wing walls and return walls Sqm 212.70
195033 Abutment cap, Pier Cap, Inspection Platform & Sqm 205.20
Pedestal over Pier cap, Fender wall, Diaphragm
wall, etc.
195034 Approach slab at formation level, Dirt wall/ Sqm 128.80
ballast wall at formation level
195035 In well Kerb & Steining Sqm 216.40
195036 In Intermediate/Top plug Sqm 205.20
195037 In Well cap and corbel if provided Sqm 128.80
195038 In Bottom/top slab, side walls, toe wall and Sqm 212.70
sumps haunch filling head walls or any other
component
195040 Providing and laying in position machine mixed, Sqm 2107.16 4.03 or as
design Mix.
Mix Cement Concrete M-25 grade (Cast - in
Situ) using 20 mm graded crushed stone
in jacketing of piers and abutments from bottom
of foundation upto a height of 10m including
finishing for average 30cm thickness of
jacketing. Payment for reinforcement, cement,
wire mesh, shuttering, drilling of holes and
insertion of rods will be made extra.
195041 Drilling 32 mm dia holes for jacketing metre 64.77

Cement
Qty.(qtl.)
195042 Inserting of dowel bars of specified dia. (cost of metre 3.94
rods to be paid extra)
196010
196020
196030
196040
196050
196060
196070
196080
196090
196100

IR's Unified Standard Schedule Of Rates 2010 Chapter-20 : Bridge Works-Superstructure:RCC
CHAPTER - 20 : BRIDGE WORKS – SUPERSTRUCTURE : RCC
Cement
Qty.(qtl.)
201010 Providing and laying in position Design Mix
Cement Concrete M 40 grade machine mixed,
machine vibrated and machine batched using
20 mm graded crushed stone aggregate and
coarse sand of approved quality for the Cast in
situ Prestressed (Post tensioned) concrete
girder / Box girders for spans upto 18.3 M
(centre to centre) Including finishing, using
Admixtures in recommended proportions (as
per IS 9103), if approved in Mix design, to
durability complete as per specifications and
direction of the Engineer incharge. Payment
for Shuttering, Cement, Admixtures,
reinforcement, HTS cables, sheathing,
anchorage cones, stressing of cables and
grouting of the ducts will be done extra
201011 With Soffit level Upto 9 m above Bed level cum 1830.81 4.30 or as
per design
mix
201012 With Soffit level From 9m above Bed Level cum 2104.17 4.30 or as
to12m above Bed Level per design
mix
201013 With Soffit level From 12 m above Bed Level cum 2172.51 4.30 or as
to 15m above Bed Level per design
mix
201014 Extra for increase in span by every 1 M or part metre/ 34.17 4.30 or as
thereof for spans above 18.3 M & upto 30.5 M cum or per design
part there mix
of
201015 Deduct for casting of Slab instead of Girders cum 136.68
(for any heights)
201020 Providing and laying in position machine cum 1830.81 4.30 or as
mixed, machine vibrated and machine batched per design
mix
Design Mix Cement Concrete M40 grade using
20 mm graded crushed stone aggregate and
coarse sand of approved quality for the
Precast Prestressed (Post tensioned) concrete
girder/ Box (Spans upto 30.5 M) in contactor’s
casting yard, including finishing, using
durability, complete as per specifications and
direction of the Engineer. .. Contd. --

Cement
Qty.(qtl.)
.. Contd. -- Payment for Shuttering, Cement,
Admixtures, reinforcement, HTS cables,
grouting of the ducts will be done extra.
Launching of girder/slab in position is not
included in this item
201021 Deduct for casting of Slab instead of cum 136.68
Girder/Box
201030 Providing and laying in position machine cum 1830.81 4.30 or as
mixed, machine vibrated and machine batched per design
mix
Design Mix Cement Concrete M 40 grade
and coarse sand of approved quality for the
Precast Prestressed (Pre tensioned) concrete
girder (Spans upto 9.1 M) in contractor’s
casting yard, including finishing, using
durability, complete as per specifications and
direction of the Engineer. Payment for
Shuttering, Cement, Admixtures,
reinforcement, HTS cables, sheathing,
grouting of the ducts will be done extra.
Launching of girder/slab in position is not
included in this item
201031 Deduct from 201030 for casting of Slab cum 136.68
instead of Girder
201040 Design, manufacturing, Supplying and fixing cu.cm. 0.12
in position elastomeric bearing pads under
prestressed concrete girder, for Pre-cast as
well as cast-in-situ girders as per approved
drawing. The rate shall include cost of load
test of one No. bearing from Railway approved
firms and all fixing materials, equipments,
machineries, labour, taxes, loading,
unloading, leading, lifting etc. complete. Rates
include getting the drawing approved from
Railway and cost of inspection during
manufacturing from railway approved
organization. (Note : 1. The rate is for
finished item complete and paid only after
fixing in position below the girder. 2. The
volume shall be given in the drawing and no
deduction shall be made for inserted steel
plates etc.)

Cement
Qty.(qtl.)
201050 Providing and fixing in position of standard
preformed sealed and slab type or strip seal
elastomeric type expansion joints for Railway
bridge or Road Over Bridges as per approved
drawings and latest MOST/IRC specifications.
The rates are inclusive of supplying, fixing
with contractor’s own materials e.g. inserts,
bolts, socket tubes, Neoprene sheet/cap etc,
equipments, machineries, labour, all taxes,
royalty, all lead & lifts, transport, testing,
surface preparations, Complete
201051 For 80 mm expansion metre 24356.29
201060 Load testing of one or more spans of bridge as
selected by the Engineer as per approved load
test procedure following relevant
IS/IRC/Railway codes with contractor’s
labour, deflection measuring instruments,
loading materials, recoding and analyzing the
load testing results including all lead & lift,
etc. complete as required. The rates are all
inclusive and will be paid after load test is
finished and girder is cleared of the
kentledges /loading material etc. The load
shall be 1.25 times the stipulated design load
Based on Design load & not span
201061 For Span design load upto 100 MT Each 62033.72
201062 Extra for every increase of 100 MT or part Each 60992.47
thereof in the span load capacity upto 800 MT 100m
201070 Providing, fabricating & fixing in position to MT 53839.36 as per
exact design profiles, prestressing H.T.S. actual site
consumptio
cables of all classification made from Low
n
Relaxation strands conforming to IS 14268 –
1995 in Prestressed Concrete girders/slabs
etc. including supplying, cutting, making into
cables with necessary spacers, colour coding,
protecting with water soluble oil at all time,
anchoring of cables, supplying and placing
spiral corrugated type galvanized metal steel
ducts sheathing made up of Cold Rolled Cold
Annealed (CRCA) mild steel conforming to IS
513 of required diameter/thickness, vent pipe,
placing, bending, routing, fixing, stressing &
grouting of cable ducts with cement grout, ..
Contd. --

Cement
Qty.(qtl.)
.. Contd. --- Anchorage sets in required
number with provision for future prestressing,
if any, including all lead and lift with
contractor’s own materials, labour,
equipments, etc. complete as per drawings &
specifications. Rate also includes covering
anchorage pads with epoxy mortar of
approved quality to avoid corrosion. Cement
for grouting to be paid separately
201071 Deduct for not using CRCA sheathing & other MT 30873.08
related items for pretensioned members from
item 201070
201072 Extra for using HDPE sheathing instead of MT 123.99
CRCA sheathing
New items To Be Added By Zonal
Railways
202010
202020
202030
202040
202050
202060
202070
202080
202090
202100

IR's Unified Standard Schedule Of Rates 2010 Chapter-21 : Bridge Work-Superstructure:Steel
CHAPTER - 21 : BRIDGE WORK - SUPERSTRUCTURE STEEL
Note - Items in this chapters are for works not requiring traffic block unless otherwise
specified in the relevant item. All items are for clear span upto 45.7 M unless otherwise
specified.

211010 Supplying of all types of structural steel conforming to MT
Fe 410 B of IS:2062, fabrication, assembling, erection /
slewing / end launching of steel girders (Not requiring
traffic block) upto 45.7 M span on sub-structure incl.
provision of trolley refuges, if reqd. complete as per
approved drawing incl. one coat of Zinc chrome primer
to 1S-104 & one coat of Zinc Chrome Red Oxide to IS
2074 and painting as per IRS-B-1 on all members,
(Detailed fabrication and erection drawings & launching
methodology will be prepared and got approved by the
contractor from Railway). Rate include fabrication of all
the types of battens, bracings, ties, stiffeners, packing,
diaphragms, shop rivets / welding, T&F bolts, drifts,
shop welds, templates, jigs, fixtures, back up supports,
accessories, transporting various components from
fabrication shop. to site, contd....
.... Contd. - including loading, unloading, lift and taxes
complete. assembly of girders' on- drifts/bolts, field
riveting/welding, assembling of temporary support for
side slewing, raising of girders to the bed block level,
providing sliding arrangements and slewing the girder in
position, lowering of girder on bearings and bed plates.
grouting holes in the bed block for fixing of HD
bolts/anchor pins of bed plates, all temporary
arrangements. Load testing may be done under chapter
22.The bearing sets to - be provided with the girders will
be paid separately as per relevant item separately.
Payment Schedule
(i) Material at site – 40%
(ii) Fabrication at site – 15%
(iii) Erection/Launching – 20%
(iv) Completion incl. painting & finishing – 25%
211011 Plate Girder/ Semi Through Girder MT 66054.43
211012 Open web Girder MT 70433.01
211013 Extra for metalising incl. preparation of surface and Sqm 13.58
applying one coat etch primer to 1S-5666
211014 Extra for using steel conforming to Fe 490 of IS: 8500 MT 1161.50
instead of Fe 410
211015 Deduct for using steel conforming to Fe 410 A of IS : MT 1161.50
2062 instead of Fe 410 B


211020 Assembling and Erection of fabricated material including
rocker and roller bearings with crane/derrick at site on
sub structure with labour, equipment, T&P including site
riveting/welding with all' temporary arrangement!
Scaffolding etc. with contractors design and scheme for
longitudinal launching/side slewing (Not requiring
traffic block) approved by Railway. Rate incl. Field
rivets/ welding, drifts, service bolts etc, as per drawings
211021 Plate Girder/ Semi Through Girder MT 12939.24

211022 Open web Girder MT 14340.63
211030 Fabricating, supplying and fixing in position Galvanized MT 82075.54
steel channel sleepers of mild steel of tested quality
conforming to IS: 2062, on fabricated girders including
all fixtures fastenings as per approved Railway drawings
with labour, material, tools and plants etc. as a
complete job including galvanizing of all components
211031 Extra for working under running traffic/traffic block MT 6005.70
conditions 0n item 211030
211040 Fabricating, supplying and fixing of 6 to 8 mm thick MT 92406.26
steel chequered plate conforming to IS: 3502 for
pathway, trolley refuges, floor for the bridge including
fixing the same over steel channel sleepers by drilling
holes in channel sleepers and trolley refuges incl. nuts &
bolts, tools and plants, labour as a complete job
211050 Metalizing of steel work of girder with grit blasting as Sqm 79.92
per IRS-B1-2001 following by one coat of etch primer
(as per IS: 5666) one coat of Zinc Chrome primer (as
per IS:104) and two coats of aluminium paint (as per
IS: 2339) with all labour, T&P and material as a
complete job
211060 Providing and fixing 65/50 mm nominal dia B class G.I. Kg 57.25
pipe railing used in rows for footpath or anti-crash
barrier railing incl. cost of M.S. angle and channels in
vertical posts, riveting, welding / rivetting, priming
painting two coats, at all heights labour and material as
a complete job
211070 Supplying and fixing anti-slip M.S. Angles/nosing Kg 50.43
65mmx 65x 8mm or any other size confirming to IS:
2062 fixing 10mm dia, anchor bar 600mm C/C and
fixing with main girder with M.S. flat on top of step of
stair case, making anti-slip grooves 7 nos. arrangement
for keeping and maintaining in position as per approved
plan with all labour and material as a complete job
211080 Providing/ fixing/ leaving/ grouting various size HTS Kg 87.38
bolts / holding down bolts in concrete column or in other
structural steel member with proper nuts, bolts,
washers /plates as a complete job. Note - Cement used
in grouting will be paid separately under relevant item


211090 Providing, cutting , fabricating , treating , fixing & MT 49974.06
painting structural steel confirming to IS:2062 in access
ladders, inspection platforms, Trolley refugee, railing,
etc, joints welded to neat finish incl. one coat of primer
& two coats of synthetic enamel paints
211100 Supplying, fitting and fixing in position true to line and MT 96665.97
level cast steel rocker bearing complete as per IS :
7666, IS:9565, IS:1030,IS:919 ,IS:3073 and as per
bridge code including all accessories as per drawing and
Technical Specifications
level forged steel roller bearing conforming complete as
per IS : 7666, IS:9565, IS:1030,IS:919 ,IS:3073 and
as per bridge code including all accessories as per
drawing and Technical Specifications
level sliding plate bearing with PTFE Surface sliding on
stainless steel as per BS: 3784, BS 5400.complete
including all accessories as per drawing and Technical
Specifications
211130 Design, Supplying, fitting and fixing in position true to cu cm 1.20
line and level elastomeric bearing conforming to IS:
3400, IS:226, BS 5400.complete including all
accessories as per drawing and Technical Specifications
211140 Supplying, fitting and fixing in position true to line and
level POT-PTFE bearing consisting of a metal piston
supported by a disc or un reinforced elastomer confined
within a metal cylinder, sealing rings, dust seals, PTFE
surface sliding against stainless steel mating surface,
complete assembly to be of cast steel / fabricated
structural steel, metal and elastomer elements complete
as per IS 2062, IS: 1030, AISI:304, AISI:316, IS:6911,
BS:3784, IS:3400, IS:226, BS 5400.,Bridge code and
as per drawing and approved Technical Specifications
The design of the bearings shall be submitted by the
manufacturers/ contractor and got approved from
Railway before fixing. Test report of the bearings should
be got approved before the materials are lifted from the
manufacturer premises. Payment is based on capacity of
Bearing
211141 POT-PTFE Bearing MT 96666.54
211142 POT Bearing MT 96666.65
211143 PIN Bearing MT 96666.65
211150 Providing vertical guide bearings as per approved MT 96665.93
drawings and fixing them with transversal and
longitudinal stoppers using reinforced neoprene pads
and PTFE-SS sliding system as per approved drawings
and specifications. Payment is based on capacity of
Bearing


211151 Longitudinal stopper bearings MT 96665.83
211152 Transverse stopper bearings MT 96666.19
211160 Supply & applying two coats of bitumen emulsion Sqm 101.55
conforming to IS 3117 - 1965 on the top surface of steel
deck slab (New bridges)@ 1.70 kg per sqm after
cleaning surface with all materials, labour, tools and
plants, equipment etc. complete.
211170 Painting steel works (New bridges) with two cover coats Sqm 80.44
of red oxide paint conforming to IS 123-62 as per IRS-
B1-2001 to given an even shade with all labour &
material including scaffolding, shuttering and strutting
along with provision of Jhoola/ hanging scaffolding
where required
211180 Providing road crane of different capacity with diff. jib
length revolving type for material handling, assembly &
erection of girders/slab/RCC Box etc.
211181 12MT capacity with 36 feet jib day 2990.86
211182 25 MT capacity with 60 feet jib day 4785.38
211186 150 MT capacity with 75 feet jib Day 29908.63
211190 Cleaning of steel work of bridge girders Up to 30.50 m. Sqm 17.90
clear span with scrappers and/or wire brushes to
remove all rust and loose or perished paint to prepare
perfectly clean & dry bare metal surface free from all
dirt/foreign material & ready for initial coat of paint.
Rate include cost of labour, consumables, brushes, tools
and plants, ladders, scaffoldings, jhoola, hanging
scaffolding staging etc.
211200 Cleaning of steel work of bridge triangulated girders Sqm 26.85
with scrappers and/or wire brushes to remove all rust
and loose or perished paint to prepare perfectly clean &
dry bare metal surface free from all dirt/foreign material
& ready for initial coat of paint. Rate include cost of
labour, consumables, brushes, misc. tools and plants,
ladders, scaffoldings, jhoola, hanging scaffolding staging
etc.
211210 Painting cleaned bridge plate girders including all
scaffolding, shuttering and strutting along with provision
of Jhoola / hanging scaffolding where required
211211 With one coat. ready mix red lead conforming to IS : Sqm 21.18
102
211212 With one coat ready mix Zinc Chromate conforming to Sqm 33.29
IS : 104 followed by one coat of Zinc Chromate red
oxide conforming to IS: 2074
211213 With two coats. ready mix red oxide conforming to Sqm 33.06
IS:123


211214 With two coats Aluminium paints in dual containers Sqm 38.90
conforming to IS : 2339
211215 With two coats epoxy paint Sqm 60.71
211220 Painting cleaned bridge girders exceeding 30.50 m clear
span including all scaffolding, shuttering and strutting
along with provision of Jhoola / hanging scaffolding
where required
211221 With one coat. ready mix red lead conforming to IS : Sqm 24.17
102
211222 With one coat ready mix Zinc Chromate conforming to Sqm 38.07
IS : 104 followed by one coat of Zinc Chromate red
oxide conforming to IS : 2074
211223 With two coats. ready mix red oxide conforming to IS : Sqm 38.44
123
211224 With two coats Aluminium paints in dual containers Sqm 43.69
conforming to IS : 2339
211225 With two coats epoxy paint Sqm 65.49
211230 Supply, fabrication and erection of bed plate of
approved sizes in exact position over bed block on
pier/abutments by giving full and even bearing, setting
them on the layer of free flow non -shrinkable grouting
compound, scrapping or chipping of bed block if
required, fabrication and fixing of HD bolts of suitable
sizes along with nuts, washers etc., drilling of holes of
required size, grouting of holes by epoxy mortar after
fixing HD bolts. Total work to be done during traffic
211231 block
Upto 12.2 m clear span Kg 2204.58
211232 More than 12.2 m but upto 18.3 m clear span Kg 2755.73
211233 More than 18.3 m but up to 30.5 m clear span Kg 3306.87
212010
212020
212030
212040
212050
212060
212070
212080
212090
212100

IR's Unified Standard Schedule Of Rates 2010 Chapter-22 : Bridges -Miscellaneous
CHAPTER - 22 : BRIDGE WORKS – MISCELLANEOUS
Cement
Qty.(qtl.)
221010 Providing and laying boulders apron on river cum 857.81
bed for protection against scour with stone
boulders weighing not less than 35 kg each
with the voids filled with spalls complete as
per drawing and Technical specification
221020 Laying of boulder apron laid in wire crates of cum 262.29
approved size including overlaps at joints
laid with stone boulders, all loose ends to be
tied with 4 mm galvanised steel wire.
Payment for boulders & wire crates to be
221030 done extragalvanized wire net trungers made
Supplying Sqm 279.02
from 4 mm galvanised steel wire @ 32 kg per
10 sqm having minimum tensile strength of
300 Mpa conforming to IS:280 and
galvanizing coating conforming to IS:4826,
woven into mesh with double twist, mesh
size not exceeding 100 x 100 mm
221040 Providing and laying of apron with cement cum 1541.80 3.200
concrete blocks cast in-situ and made with
nominal mix of 1:2:4 with a minimum
cement content of 250 kg/cum. Payment to
be made for blocks only. Cost of cement and
shuttering to be paid extra
221050 Providing and laying Pitching with stone cum 940.39
with the voids filled with spalls on slopes laid
over prepared filter media including boulder
apron laid dry in front of toe of embankment
complete as per drawing and Technical
specifications (Filter media to be paid
separately under the relevant item)
221060 Providing and laying Pitching with stone cum 1398.13 1.250
with the voids filled with cement sand mortar
1:4 on slopes laid over prepared filter media
including boulder apron laid dry in front of
toe of embankment complete as per drawing
and Technical specifications (Filter media to
be paid separately under the relevant item)
221070 Providing and laying Filter material As Per cum 1355.00
RDSO Specifications underneath pitching in
slopes complete as per drawing and
Technical specification

Cement
Qty.(qtl.)
221080 Providing & Laying of a Permeable geotextile
filter between pitching and embankment
slopes on which pitching is laid to prevent
escape of the embankment material through
the voids of the stone pitching/cement
concrete blocks as well as to allow free
movement of water without creating any
uplift head on the pitching. as per RDSO
guide lines
221081 With GJT-Type 1 (For Harsh conditions) Sqm 28.75
221082 With GJT-Type 2 (For less severe conditions) Sqm 34.76
221083 With GJT-Type 3 (For moderate conditions) Sqm 48.81
221090 Laying boulder apron on river bed for cum 84.21
protection against scour with stone boulders
supplied by railways with the voids filled with
spalls complete as per drawings and
technical specifications. With maximum lead
upto 150m
221100 Laying pitching with stone boulders supplied cum 127.33
by the railways with the voids filled with
spalls on slopes laid over prepared filter
media including boulder apron laid dry in
front of toe of embankment as per drawings
and technical specifications. Max lead upto
150m (Filter media to be paid under the
relevant item)
Flooring in Bridges
222010 Providing and laying Flooring with rubble cum 1336.04 1.12 for
stone , laid over 15 cm thick CC 1:2:4 and rubble
stone only
the voids filled with CC 1:2:4 complete with
the joints pointed with 1:2 Cement sand
mortar as per drawing and Technical
specifications. Payment for cement to be
done separately. Voids in the rubble stone to
be taken as 35% of the gross volume of the
stone layer. (Base concrete to be paid extra)
222020 300 mm thick (average) Dry stone flooring cum 875.84
with boulders of not less than 35 kg each in
weight , hand packed with surface levelled
off to the correct section with hammer
dressing as necessary on the ground
including filling the gaps with quarry spalls
and ordinary sand complete including the
cost of supply of all materials, labour, lead,
lift, tools, plants, crossing of tracks and the
like as per drawing and technical
specification as directed by Engineer

Cement
Qty.(qtl.)
222030 Supply and laying of quarry dust including cum 752.01
consolidation, supply of all materials, labour,
lead, lift, tools, plants, crossing of tracks as
per drawing and technical specification as
directed by the Engineer incharge in case
loose slush is encountered at site of
foundation before casting the foundation or
before laying the filtering media
222040 Supply and laying of coarse sand including cum 699.51
consolidation, supply of all materials, labour,
lead, lift, tools, plants, crossing of tracks as
per drawing and technical specification as
directed by the Engineer incharge in case
loose slush is encountered at site of
foundation before casting the foundation or
before laying the filtering media
222050 Guniting concrete surface with cement Sqm 867.20 0.160
mortar of average thickness 25mm, applied
with compressor after cleaning surface and
spraying with epoxy complete as per
Technical Specification in the ratio of 16 Kg
of cement to 0.04 cum of sand,
50X50X3mm size wire mesh, with 0.67 Kg of
epoxy and 0.64 Kg of accelerator compound
for guniting per Sqm
222060 Providing and inserting nipples with Each 37.01
approved fixing compound after drilling holes
for grouting as per Technical Specifications
including subsequent cutting/removal and
sealing of the hole as necessary after
completion of grouting
222070 Sealing of cracks/porous concrete by
injection process through nipples/Grouting
complete as per Technical Specification
222071 Neat Cement Grout with 20 % anti shrinkage Kg 132.12 as per actual
compound w.r.t. cement site
consumption
222072 Cement sand Mortar (1:1) Grout with 20 % Kg 179.10 as per actual
anti shrinkage compound w.r.t. cement site
consumption
222073 Epoxy Grout Kg 883.24

222080 Patching of damaged concrete surface with Sqm 452.14
Pre packed polymer concrete with average
thickness of 25mm. Curing compounds,
initiator and promoter, available in the
formulations, to be applied as per
instructions of manufacturer and as approved
by the Engineer

Cement
Qty.(qtl.)
222090 Applying epoxy mortar over leached, honey Sqm 1057.03
combed and spalled concrete surface and
exposed steel reinforcement complete as per
Technical Specification with average
thickness of 10 MM including priming coat,
mortar plaster and seal coat of epoxy
222100 Removal of defective concrete, cleaning the Sqm 937.17 0.160
surface thoroughly, applying the shotcrete
mixture mechanically with compressed air,
comprising of cement, sand, coarse
aggregates, water and quick setting
compound as approved, gunite strength not
less than 25 Mpa with average thickness of
40mm in the ratio of 16 Kg of cement to 0.04
cum of sand, 50X50X3mm size wire mesh
with 0.67 Kg of epoxy and 0.64 Kg of
accelerator compound for guniting per Sqm
222110 Applying pre-packed cement based polymer Sqm 317.78
mortar of strength 45 Mpa (28 days) for
replacement of spalled concrete with average
thickness of 10mm
222120 Providing & applying Epoxy for bonding of Sqm 600.88
new concrete to old concrete @ 0.80 Kg /
sqm with pot life not less than 60-90 minutes
and as per specifications including cleaning
the surface
222130 Providing & Fixing 12 mm rabbit wire mesh Sqm 90.74
at the junction of RCC where specifically
ordered or as shown in the drawing
222140 Providing, cutting, fabricating, treating, fixing MT 62688.74
structural steel as per IS: 2062 in access
ladders (top of girder/slab to pier cap),
inserts, platforms, railing, trolley refuges,
drain pipes etc. by drilling holes and grouting
with C.C as per specifications including
painting with two coats of approved paint
over two coats of primer. (Cement for
grouting shall be paid separately)
222150 Providing/ fixing/ grouting various size HTS Kg 135.71 0.010
holding down bolt in concrete column or in
other structural steel member incl. drilling
holes of required size, bolts threaded at both
ends shall be fixed with proper size nuts
bolts, plates, washers complete including all
labour and material
222160 Providing weep holes by making suitable metre 283.54 0.020
opening or drilling in existing Brick
masonry/Plain/ Reinforced concrete
abutment, wing wall/ return wall with 100
mm dia AC pipe, extending through the full
width of the structure complete

Cement
Qty.(qtl.)
222170 Providing and fixing of Drainage Spouts of metre 250.89 0.010
100 mm UPVC complete as per drawing and
Technical specification
222180 Providing and laying of filter media consisting cum 1652.90
of granular materials of GW, GP, SW groups
as per IS 1498-1970 in required profile
behind boulder filling of abutments, wing
walls / return walls etc above bed level with
all labour and material complete job as per
drawing and technical specification of RDSO
Guidelines
222190 Removing all loose concrete, cleaning rust
with dusting compound & water jet, drying,
replacing worn out reinforcements by
welding new re-inforcement for making up
lost steel section, applying approved
anticorrosive polymer coating over the
damaged area to proper profile, providing
polymer mortar (upto 20 mm. thickness) or
polymer concrete (more than 20 mm.
thickness) consisting of cement, sand, 6 mm.
down chips where required and polymer as
per manufacturers' specification. The rate
includes curing for 14 days, all materials,
consumables, labours, tools and plants,
scaffolding/staging with all lead and lift. Cost
of cement & inforcement to be paid
222191 20 mm. thick polymer mortar Sqm 1311.15 0.122
222192 20-50 mm. thick polymer concrete Sqm 1049.67
222200 Supply, fabrication and erection of steel MT 86435.02
members to replace existing corroded
members of built up section made up of MS
plate, angles, channels of different thickness
and sizes incl. painting with red lead priming
to IS: 102 and one heavy coat of ready mix
red oxide conforming to IS: 123. Structural
steel should conform to IS:2062-Gr'B'.
Fabrication and erection to be as per existing
design initially by bolts and nuts and finally
by rivetti'lg during the sanctioned traffic
block. Payment for rivets and riveting to be
made separately. Rate includes cutting of
new steel work, drilling for riveting,
dismantling of any existing members
required for inserting fabricated members,
fixing of new fabricated built up members
with all tools, plants, labour, consumables,
machinery and accessories etc. Work will be
executed as per IRS:B 1-2001

Cement
Qty.(qtl.)
222210 Supplying and changing of corroded worn-
out and loose rivets of any size at any
location of the bridges with or without traffic
blocks including all tools, plants, machinery
complete in all respects. Cost of rivett to pay
separate
222211 Rivetts size upto 25 mm dia. Each 141.31
222212 For Rivets more than 25 mm dia. Each 239.68
222220 Dismantling of existing bed plate from Each 4869.28
existing bed block by cutting & removal of Plate
HD bolts and nuts with all tools, plants,
machinery scaffolding, labour and other
materials and shiting it at one end of the
bridge during traffic block.
222230 Painting the HFL and danger level marks, Each 103.39
year of HFL on bridge abutments and piers Mark
with ready mixed paint as per standard in
two coats over one coat of primer with all
materials, labour, tools, scaffolding, all lead
and lift etc including writing complete
222240 Providing cast in situ bridge number plaques Each 475.55 0.100
as per Railway drawing in cement concrete
1:2:4 mix using 20mm hard stone
aggregate embedded in 30mm notch in
Bridge parapet coping duly engraving the
letter and figures and an arrow indicating the
direction of flow and finishing the top
exposed surface with cement mortar 1:3,
painting letters and figures with two coats of
black enamel paint on two coats of white
back ground with all labour, tools, cement,
paint etc.with all lead and lifts
222250 Providing cast in situ plaques for bridge Each 619.95 0.100
foundations details of size 45x45x5 cm in
cement concrete 1:2:4 mix using 20mm hard
stoneaggregate embedded in 30mm deep
notch over abutment & piers, engraving the
letters & figures with CM 1:3 and finished
smoth including painting letters and figures
with 2 coats of black enamel and plaque with
white enamel with all labour, tools, cement,
paint, curing, etc. as a complete job
222260 Providing & laying non pressure NP-4 Class
RCC pipe with collars, jointing with 1:2
Cement and ordinary sand mortar including
testing of joints but excluding earth work
with all labour and material as a complet job.
Cement for mortar will be paid seperately
222261 600 mm dia. metre 1671.10
222262 900 mm dia. metre 2134.66
222263 1000 mm dia. metre 2705.66
222264 1200 mm dia. metre 3897.87

Cement
Qty.(qtl.)
222280 Supplying, spreading and filling coarse sand cum 631.72
(No cohesive materials to be used) of
approved quality including watering and
ramming in foundation, plinth, behind the
abutment, wing wall, retaining wall in layers
not exceeding 150mm thick including its
compaction as per direction of Engineer-in-
charge. The rate includes all lead, lift,
ascent, descent, crossing of Railway line, etc.
complete with contractor’s labour, materials,
tools and plant
222290 Providing Boulder backing behind wing wall, cum 147.85
return wall, retaining wall with hand packed
boulders & cobbles with smaller size boulders
toward the back including all lead, lift, labour
& other incidental charges as complete work
in all respect. Payment for boulder/cobbles
will be done extra
222300 Dewtering of natural or accumulated water HP Hour 20.67
from any location. Payment to be done for
Horse power of pump multiplied by pumping
hours
222310 Supplying & fixing Galvanised Steel wire Sqm 1027.67
ropenet, made of 9mm dia steel wire rope
having aperture size of 45cm x 60cm with
6m long hangs for top anchoring and 5m
wide alongwith chain-link mesh-netting of
80mm x 80mm mesh size made from 2.4mm
dia galvanised wire, joining of chain-link
mesh & steel wire ropenet and joining of
adjacent nets with galvanised spiral lock
springs of steel wire dia 2.2mm; inner dia of
springs 18mm; total length 50mm ± 0.5mm;
pitch 4mm & open end length 60mm
including cutting of tree/shrub etc. in rope-
netting location .....contd.
... contd. - and also, excavation / filling-back
of trenches in all types of soil after anchoring
ropenet with RCC pre-cast beam of size
15cm x 15cm x 2m of M-15 concrete & 30cm
thick M-10 PCC. This work also includes
supply of 200mm x 200mm x 6mm epoxy
coated washer plates with 12.5mm / 18mm
dia hole at centre and supplying & fixing of
anchor bolts/fastners of 10mm dia including
drilling of holes upto a depth of 110mm in
rock; cleaning of holes; fixing of fastners
with nut & epoxy coated washer plates; -
contd....

Cement
Qty.(qtl.)
... contd. - applying torque 65 to 70 N/mm
for fixing of ropenet for intermediate
anchoring on the surface of cutting, bottom
anchoring upto 1m depth by using 16mm dia
HYSD steel bolts, threaded upto 200mm on
top and fixing epoxy coated washer plate,
fabrication & fixing of U-pin on top of cutting
for top anchoring and joining of adjacent
nets with spiral spring and fixing at the ratio
of 1 no. per 0.6m in longitudinal direction of
net portion and additional locks for lacing
chain link netting with ropenet with
contractor's materials, machinery, tools &
plants, cement, steel, labour, lead, lift,
transportation, ascent, descent, taxes,
royalty etc. complete as per directions of
222320 Supplying & fixing of Erosion Control Geomat Sqm 233.46
(for surfacial erosion control) consisting of 2
layers of polymeric netting, having aperture
size of 20mm x 20mm and a middle layer of
coir as per Specifications. Max. width of
rolls/each composite mat shall be 5m. Work
includes dressing of slopes to proper profile
& removing loose rubbles, muck & leading to
the point as directed by engineer-incharge;
supply & spreading of good earth/soil
material on slope/berm portion etc. to
proper profile for laying of Geomat anchoring
in top anchor trench; seaming of adjacent
panels of Geomat with HDPE Twine;
fabrication & fixing of U-pin on slope/berms
including top of cutting for anchoring of
Geomat as per approved scheme and
providing of grass sods and placing over
Geomat so as to completely cover it,
including watering for 2 weeks with all
labour, tools & materials alongwith lead & lift
etc. complete

Cement
Qty.(qtl.)
222330 Supplying & placing of Mechanically Woven cum 2294.30
Double Twisted Hexagonal Shaped Wire Mesh
Gabion Boxes of required sizes, Mesh Type
10cm x 12cm, Zn and PVC coated Mesh Wire
dia.2.7/3.7mm (ID/OD), edges of meshes
mechanically edged / selvedged with heavy
coating of galvanization as per EN 10223-
3/ASTM A 975 with partitions at every 1m
interval and properly packed with approx.
150mm size boulders including
transportation and placing at indicated places
as per direction of engineer-in-charge
including contractor's tools, plants, labour,
royalty charges etc. complete in all respect
and stitching with lacing wire of dia.
2.2/3.2mm (ID/OD) @ 5% by weight of
Gabion boxes, carrying the material by head
lead from nearest approach with all safety
precautions and all leads and lifts
222340 Supplying & placing partly or fully cum 2290.56
underwater of Polypropylene Tarred Rope
Gabion, fabricated from 9mm dia. rope,
100mm x 100mm Mesh with partitions at
every 1m interval and properly packed with
approximately 150mm size boulders
including transportation and placing at
indicated places as per direction of engineer-
in-charge with contractor's tools, plants,
labour etc. including royalty charges
complete in all respect and stitching with
polyprpylene lacing rope of minimum dia.
4mm; carrying the material by head lead
from nearest approach with all safety
precautions and all leads and lifts
SURFACE PROTECTION OF BRIDGES
222350 Surface protection of Piers, substructure, Box

bridges and culverts in river bed by cleaning
& preparing the surfaces by acid etching;
treating surface with a two-layer plaster; first
layer of 7 mm (5 mm in case of sidewalk)
thick with cement (OPC or slag) admixed
with an octadecanoic acid based cementitious
waterproofing compound (Max. bulk density
0.5 gm/cc), in the weight ratio of 50:3 for
cement and waterproofing compound; and
second layer of 12 mm thick cement-sand
(1:2.5) plaster, enriched with polyester fibre
(to be paid seperately) and curing the
plastered surface. Treatment shall be
impermeable under a waterhead of 20.0
metres. -- Contd. ...

Cement
Qty.(qtl.)
.. Contd. -- (Note : In lieu of etching with
acid the surface can be roughened or bond
improved by other appropriate means.)
complete as per specification
222351 Piers, substructure, Box bridges and culverts Sqm 376.09
in river bed
222352 Sidewalks Sqm 324.09
222360 Surface protection of Underside of Bridge Sqm 240.85
Decks, Girders, Inside of Box Girders,
Railings, etc. of Bridges and Piers and
Substructures which are not in River Bed by
cleaning and drying the surface; repairing
local defects, e.g. honeycombs with a paste
of cement admixed with 5% by weight of
cement of Polymer bonding agent, applying
(@ 0.30 litre per square metre) a coat (DFT
of 100-150 micron) of a translucent brown
coloured modified phenolic resin based single
component high performance polymeric
waterproofing compound (sp. gr. 0.87, rosin
content nil and a solid content of minimum
0.47%), applying (@ 0.25 litre per square
metre) a top coat of a modified phenolic
resin based single component waterproofing
compound of grey or other shades (sp. gr.
0.85) before the base coat becomes tack-
free; permitting the coatings to cure and dry
naturally; the 2-coat system shall be
impermeable under a water head of 20.0
metres, complete as per specification
222370 Surface protection of Bridge Deck by cleaning Sqm 345.52
and preparing the surface by acid etching;
treating the surface with a two-layer plaster;
first layer of 5 mm thick with cement (OPC or
slag), admixed with an octadecanoic acid
based cementitious waterproofing compound
(bulk density not greater than 0.5 gm/cc) in
the weight ratio of 50:3 for cement and
waterproofing compound, further enriched
with specially fabricated deformed galvanized
steel fibre (@ 150 gm per square metre of
treated surface and second layer of 12 mm
thick cement-sand (1:2.5) plaster, enriched
with polyester fibre (to be paid seperately)
and curing the plastered surface. Treatment
shall be impermeable under a waterhead of
20m complete as per specifications
New Items To Be Added By Zonal
Railways
223010
223020
223030
223040

IR's Unified Standard Schedule Of Rates 2010 Chapter-23 : Road And Platform Works
CHAPTER - 23 : ROAD AND PLATFORM WORKS
Cement
Qty.(qtl.)
SUB-BASES AND BASES
231010 Preparation of subgrade by excavating earth Sqm 38.16
upto 22.5cm depth, dressing to camber and
consolidating with power road roller of 8 to 12
tonne capacity including making good the
undulations etc. and disposal of surplus earth
with lead upto 50 metres
231020 Consolidation of subgrade with power road roller Sqm 1.42
of 8 to 12 tonne capacity including making good
the undulations etc. with earth or quarry spoils
etc. and re-rolling the subgrade
231030 Providing and laying each layer of flat brick
soling hand packed and joints filled with ordinary
sand
231031 With well burnt bricks. Class 7.5 designation Sqm 118.23
231032 With Jhama bricks Sqm 106.31
231040 Providing and laying water bound macadam with
specified stone aggregate, stone screening and
binding material including screening, sorting,
spreading to template and consolidation with
power road roller of 8 to 10 tonne capacity etc.
complete.
231041 Sub-base with stone aggregate 90mm to 45mm cum 1488.61
including stone screening 13.2mm size
231042 Base course with 63mm to 45mm size including cum 1276.05
stone screening 13.2mm size
231043 Base course with 53mm to 22.4mm size cum 1213.62
including stone screening 11.2mm size
231050 Providing and laying water bound macadam sub-
base with brick aggregate and binding material,
earth / moorum etc. including screening, sorting
and spreading to template and consolidation with
light power road roller etc. complete
231051 Over burnt (Jhama) brick aggregate 120mm to cum 785.92
40mm
231052 Over burnt (Jhama) brick aggregate 90mm to cum 836.25
45mm
231060 Providing and laying bitumen penetration
macadam with hard stone aggregate, with
bitumen of suitable penetration grade including
required key aggregate as specified, spreading
coarse aggregate with the help of self propelled /
tipper tail mounted aggregate spreader and
applying bitumen by a pressure distributor and
then spreading key aggregate with the help of
aggregate spreader complete including
consolidation with road roller of minimum 8 to
10 tonne capacity

Cement
Qty.(qtl.)
231061 For 50mm compacted thickness using 6cum Sqm 258.20
coarse aggregate of size 50-20mm graded,
1.5cum key aggregate of size 12.5mm graded,
and 500kg paving asphalt 80/ 100 per 100sqm
231062 For 75mm compacted thickness in two layers Sqm 365.12
using 9cum coarse aggregate of size 63-41mm
graded, 1.8cum key aggregate of size 20mm
graded, and 680kg paving asphalt 80/ 100 per
100sqm
231070 Providing and laying 4 cm thick moorum Sqm 21.26
surfacing (Consolidated Thickness) on platforms,
pathways, etc including spreading watering and
consolidation with 3 T Roller or light power roller
complete
231080 Providing and spreading 6mm thick layer of red Sqm 26.08
bajri/ moorum, watering and rolling with 3 T
roller or light power roller complete including
preparation of the surface and rolling
SURFACE DRESSING :
232010 Surface dressing on new surface with paving Sqm 132.81

bitumen of grade A-90/ S-90 of approved quality
using 2.25 kg of bitumen. per sqm with 1.65
cum of stone chippings 13.2mm nominal size per
100 sqm of road surface including consolidation
with road roller of 6 to 8 tonne capacity etc.
complete
232020 Surface dressing on new surface in two coats Sqm 179.68
with bitumen of grade A-90/ S-90 of approved
quality using 1.8kg. of bitumen per sqm with
1.5cum of stone chippings 13.2mm nominal size
per 100 sqm of road surface for 1st coat and
1.1kg of bitumen per sqm with 1.00cum of stone
chippings 11.2mm nominal size per 100sqm of
road surface for 2nd coat including consolidation
of each coat separately with road roller of 6 to 8
tonne capacity etc. complete
232030 Surface dressing on old surface with hot bitumen Sqm 111.22
of grade A-90/ S-90 of approved quality using
1.95 kg of bitumen per sqm with 1.50 cum Stone
chippings 11.2mm nominal size per 100 sqm of
road surface including consolidation with road
roller of 6 to 8 tonne capacity etc. complete
232040 Surface dressing one coat on new surface with Sqm 87.43
bitumen emulsion (minimum 50% bitumen
content- RS grade conforming to IS: 8887) at a
rate of 1.95kg/sqm of surface area with 1.5cum
of stone chippings 13.2mm nominal size per 100
sqm of road surface including consolidation with
road roller of 6 to 8tonne capacity etc. complete

Cement
Qty.(qtl.)
232050 Surface dressing one coat on old surface with Sqm 56.61
bitumen emulsion (minimum 50% bitumen
content- RS grade conforming to IS: 8887) at
the rate of 1.22kg/ sqm of surface area with
1.11cum of stone chippings 11.2mm nominal
size per 100 sqm of road surface including
consolidation with road roller of 6 to 8tonne
capacity etc. complete
PRE MIX CARPET :
233010 Providing and applying tack coat using bitumen

emulsion (Rapid setting) complying with IS:
8887- 1995, spraying the bitumen emulsion with
mechanically operated spray unit, cleaning and
preparing the existing road surface as per
specification
233011 On W.B.M. @ 0.4kg/ sqm Sqm 21.79
233012 On bituminous surface @ 0.25kg/ sqm Sqm 15.04
233020 Providing and laying 2cm premix carpet
surfacing with 1.8cum and 0.90cum of stone
chippings of 13.2mm size and 11.2mm size
respectively and 144 kg of hot bitumen per 100
sqm over a tack coat including consolidation with
road roller of 6 to 8 tonne capacity etc. complete
(tack coat to be paid separately)
233021 With paving asphalt 80/ 100 heated and then Sqm 109.94
mixed with solvent at the rate of 70grams per
kg. of asphalt
233022 With paving asphalt 60/ 70 with no solvent Sqm 108.39
233023 With refinery modified bitumen CRMB 55 Sqm 138.62
conforming to IRC: SR: 53- 1999
233030 Providing and laying 2.5cm premix carpet
surfacing with 2.25Cum and 1.12cum of stone
chippings of 13.2mm size and 11.2mm size
respectively and 180kg of hot bitumen per
100sqm over a tack coat including consolidation
with road roller of 6 to 8tonne capacity etc.
complete (tack coat to be paid separately.
233031 With paving asphalt 80/ 100 heated and then Sqm 134.82
kg. of asphalt
233032 With paving asphalt 60/ 70 with no solvent Sqm 133.78
233040 Providing and laying 2cm premix carpet Sqm 128.08
surfacing with 2.4cum of stone chippings
11.2mm nominal size and 230kg bitumen
emulsion (medium setting min. 65% bitumen
content) complying with IS: 8887- 1995 per
100sqm including consolidation with road roller
of 6 to 8tonne capacity etc. complete

Cement
Qty.(qtl.)
233050 Providing and laying 2.5cm premix carpet Sqm 158.43
surfacing with 3cum of stone chippings 10mm
nominal size and 288kg bitumen emulsion
(medium setting min. 65% bitumen content)
complying with IS: 8887- 1995 per 100sqm
including consolidation with road roller etc.
complete
BITUMASTIC SHEET WEARING COURSE :
234010 2.5 cm thick bitumastic sheet with hot bitumen

of approved quality using stone chippings (60%
12.5 mm nominal size and 40% 10 mm nominal
size) @ 1.65 cum per 100 sqm and coarse sand
at 1.65 cum per 100 sqm of road surface and
with bitumen @ 56 kg/cum of stone chippings
and @ 128 kg/cum, of sand over a tack coat with
hot straight run bitumen including consolidation
with road roller of 8 to 10 tonne etc. complete,
(tack coat to be paid separately) :
234011 With paving bitumen 80/ 100 heated and then Sqm 165.09
kg. of asphalt
234012 With paving bitumen 60/ 70 with no solvent Sqm 163.63
234020 4cm thick bitumastic sheet with hot bitumen of
approved quality using stone chippings (60%
12.5mm nominal size and 40% 10mm nominal
size) 2.60cum and coarse sand 2.60cum of road
surface and with 478kg bitumen per 100sqm of
road surface over a tack coat including
consolidation with road roller of 8 to 10tonne
etc. complete (tack coat to be paid separately)
234021 With paving bitumen 80/ 100 heated and then Sqm 250.36
kg. of asphalt
234022 With paving bitumen 60/ 70 with no solvent Sqm 252.72
SEAL COAT :
235010 Providing and laying seal coat of premixed fine Sqm 44.02
aggregate (passing 2.36mm and retained on
180micron sieve) with bitumen using 128 kg of
bitumen of grade 80/ 100 bitumen and 0.60cum
of fine aggregate per 100sqm of road surface
including rolling and finishing with road roller all
complete. Note - This should not be operated
along with Hot mix carpeting
CONCRETE PAVEMENTS :

Cement
Qty.(qtl.)
236010 Cement concrete Grade M15 of coarse aggregate cum 1551.77 3.200
40mm nominal size, in pavements, laid to
required slope and camber in panels as required
including consolidation finishing and tamping
complete
236020 Providing and laying design mix cement concrete cum 1973.24 3.4 or as
in roads, having a cube strength of M-30 using per design
mix
cement, coarse sand and graded stone aggregate
of 40mm nominal size as per approved design.
mechanically vibrated, steel form work, curing,
providing and filling construction & dummy joints
with approved joint filler (conforming to grade B
of IS: 1834) rounding of the edges, making &
filling the grooves as per drawing
236030 Providing and fixing at or near ground level Sqm 461.38 0.070
factory made RCC pavement slab of M-30 grade
of size 450x450x50mm with reinforcement of
6mm dia M.S. bars 4 nos. on each side including
setting in position in footpath to the required
level and line over a bed of 20 mm average thick
cement mortar (1 cement: 3 coarse sand) joint
thickness not more than 5mm except on curve
including filling of joints with same cement
mortar and making grooves etc. complete as per
direction of Engineer-in-charge
236040 Extra over item236010 & 236020 for providing litre 48.01
and mixing hardening compound of approved
quality as per manufacturer’s specification
236050 Providing and fixing in position pre-moulded per cm 3.51
joint filler in expansion joints width per
cm depth
/ metre
236060 Providing and laying in position bitumen hot per cm 1.54
sealing compound for expansion joints etc. using width per
cm depth
grade ‘A’ sealing compound
/ metre
236070 Painting road surface marking with adequate
number of coats to give uniform finish with ready
mixed road marking paint conforming to IS: 164,
on bituminous surface in white/ yellow shade
including cleaning the surface of all dirt, scales,
oil, grease and foreign material etc. complete
236071 New work (minimum two coats) Sqm 72.27
MISCELLANEOUS :
237010 Providing and fixing Cat’s Eye (Glow studs) Each 583.81
heavy integral stem, reflective, aluminium die
cast with elegant finish of size 100x100mm and
20mm high having a stem of 50mm (or 12mm
dia. 90mm long) screwed and nailed to fix into
the road surface or at the nosing of the central
verge. The road studs should have reflectors
fitted on one side of the studs (3Nos. 7 element
or 1No. 29 element reflector) complete

Cement
Qty.(qtl.)
237020 Deduct for using hand roller instead of power Sqm 10% of
road roller for consolidation, If due to site Basic Items
conditions the power road roller can not be used
and use of hand roller is specifically permitted in
writing. 10% deduction is made on the total unit
cost of the item concerned
237030 Supplying and laying Kerb stone 30cm X 20cm metre 763.65 0.020
(In Section / including chamfering as per design
if any) chisel dressed on top and sides including
fixing in 1:6 cement sand mortar and pointing
with 1:2 cement mortar (1cement:2 Sand
ordinary) including all excavation / refilling,
ramming and other incidental works as required
237040 Supplying and laying Channel stone 30cmX 10 metre 402.42 0.020
cm (In Section ) chisel dressed on top and sides
including fixing in 1:6 cement sand mortar and
pointing with 1:2 cement mortar (1cement:2
Sand ordinary) including all excavation/ refilling,
237050 Supplying and laying precast Kerb Stone of metre 319.96 0.020
concrete M25 Grade 30cmX 20 cm (In Section /
including chamfering as per design if any)
Sand ordinary) including all excavation /refilling,
ramming and other incidental works as required.
237060 Supplying and laying precast Channel Stone of metre 180.58 0.020
concrete M25 Grade 30cmX 10 cm (In Section)
Sand ordinary) including all excavation /refilling,
237070 Providing and laying Dry Brick (FPS bricks of metre 59.78
class designation 7.5) edging of full brick width
and half brick depth including excavation,
refilling / ramming and disposal of surplus earth
lead upto 50 metres
237080 Providing and laying Dry Brick (FPS bricks of metre 16.99
class designation 7.5) edging laid length wise
with half brick depth including excavation,
refilling / ramming and disposal of surplus earth
lead upto 50 metres
237090 Providing and laying toothed (Diagonal) brick metre 19.78
edging along paths etcat an angle of 60 Degree
to the horizontal including excavation, refilling /
ramming and disposal of surplus earth lead upto
50 metres
237100 Scarifying 50mm metalled (water-bound) road Sqm 6.97
surface including disposal of rubbish lead upto
50metres and consolidation of the aggregate
received from scarifying with power road roller of
8 to 10 tonne capacity

Cement
Qty.(qtl.)
237110 Making bajri path including preparation of Sqm 105.97
subgrade, supplying and laying brick aggregate
of 50mm nominal size 7.5cm deep with binding
material consisting of 12mm thick layer of
moorum and 12mm thick layer of red bajri
consolidated with road roller
237120 Providing and laying Dry brick (F.P.S. bricks of metre 188.45
class designation 7.5) pitching half brick thick in
drains including supply of brick and preparing
the surface complete
237130 Cutting road and making good the same
including supply of extra quantities of materials
i.e. aggregate, moorum screening, red bajri,
Bitumen, compaction, protection during work,
etc and labour complete
237131 Bituminous portion cum 1262.44
237132 Water bound macadam cum 603.89
237140 Cutting bajri paths and making good the same cum 92.69
including supply of extra quantities of brick
aggregate, moorum and red bajri etc and labour
with compaction, protection during work
complete
DENSE MACADAM FOR HEAVY DUTY ROADS
238010 Providing and laying Dense Bituminous macadam

on prepared surface with specified graded
crushed stone aggregate for profile corrective
base/ binding course mixing of stone
aggregate, filler and bitumen in hot mix plant,
transporting the mixed material and laying with
paver finisher fitted with electronic sensing
device to the required level and grade and rolling
by road roller as per specifications, to achieve
the desired density, but excluding the cost of
primer I tack coat
238011 75 mm average compacted thickness with Sqm 501.69
bitumen of 60/70 grade @ 5% by weight of total
mix and lime filler @ 2% by weight of Aggregate.
(For very heavy traffic condition)
238012 75mm average compacted thickness with Sqm 389.59
bitumen of 60/70 grade @ 3.5% by weight of
total mix
238013 50 mm average compacted thickness with Sqm 334.37
bitumen of 60/70 grade @ 5% by weight of total
mix and lime filler @ 2% by weight of Aggregate.
(For very heavy traffic condition)
238014 50mm average compacted thickness with Sqm 259.66
bitumen of 60/70 grade @ 3.5% by weight of
total mix

Cement
Qty.(qtl.)
238020 Providing and laying Dense Bituminous concrete
on prepared surface with specified graded stone
aggregate for wearing course, mixing of
bitumen, filler & stone aggregate in hot mix
plant, transporting the mixed material and laying
with mechanical paver finisher fitted with
electronic sensing device to the required level
and grade and rolling with road rollers, as per
specification, to achieve the desired density and
compaction but excluding cost of primer / tack
238021 coat
40 mm / 50mm compacted thickness with cum 7329.06
bitumen of grade 60/70 @ 6.5% and lime @ 3%
by weight of total mix
238022 40 mm / 50mm compacted thickness with cum 9850.94
bitumen of grade CRMB (Crumb rubber Modified
Bitumen) 60 @ 5.5% and lime @ 3% by weight
of total mix
238023 40 mm /50mm compacted thickness with cum 8569.19
bitumen of grade PMB-(Polymer Modified Binder -
Plastomeric Thermoplastic) - 40 @ 5.5% and
lime @3% by weight of total mix
238030 Providing and laying bitumen mastic wearing
course (as per specifications) with industrial
bitumen of grade 85/25 conforming to IS : 702
prepared by using mastic cooker and laid to
required level and slope including providing
antiskid surface with bitumen precoated fine
grained hard stone chipping of approved size at
the rate of 0.005 cum per 10 sqm and at
approximate spacing of 10cm centre to centre in
both directions, pressed into surface protruding
1mm to 4mm over mastic surface, including
cleaning the surface, removal of debris etc. all
complete. (Considering bitumen using 10.2% as
per MORTH specification)
238031 25 mm thick Sqm 626.69
238032 40 mm thick Sqm 1002.71

Cement
Qty.(qtl.)
238040 Manufacturing supplying and fixing retro
reflective sign boards made up of 2mm thick
aluminium sheet, face to be fully covered with
high intensity encapsulated type heat activated
retro reflective sheeting conforming to type - IV
of ASTM-D 4956-01 in blue and silver white or
other colour combination including subject
matter, message (bi-lingual), symbols and
borders etc. as per IRC ; 67:2001, pasted on
substrate by an adhesive backing which shall be
activated by applying heat and pressure
conforming to class -2 of ASTM-D-4956-01 and
fixing the same with suitable sized aluminium
alloy rivets @ 20 cm c/c to back support frame
of M.S. angle iron of size 25x25x3 mm alongwith
theft resistant measures, mounted and fixed with
2 Nos. M.S. angles of size 35x35x5 mm to a
vertical post made up of M.S. Tee section ISMT
50x50x6 mm - contd. ...
... contd.- welded with base plate of size
100x100x5 mm at the bottom end and including
making holes in pipes, angles flats, providing &
fixing M.S. message plate of required size steel
work to be painted with two or more coats of
synthetic enamel paint of required shade and of
approved brand & manufacture over priming coat
of zinc chromate yellow primer (vertical MS-Tee
support to be painted in black and white
colours). Backside of aluminium sheet to be
painted with two or more coats of epoxy paint
over and including appropriate priming coat
including all leads and lifts etc. complete as per
drawing, specification and direction of Engineer-
in-charge. (Note : Concreting for fixing may be
done as per site requirement and paid for
separately)
238041 Cautionary/warning sign boards of equilateral Each 2700.32
triangular shape having each side of 900mm
with support length of 3650mm
238050 Providing and applying 2.5mm thick road Sqm 612.04
marking strips (retro-reflective) of specified
shade/ colour using hot thermoplastic material
by fully/ semi automatic thermoplastic paint
applicator machine fitted with profile shoe, glass
beads dispenser, propane tank heater and profile
shoe heater, driven by experienced operator on
road surface including cost of material, labour,
T&P, cleaning the road surface of all dirt, seals,
oil, grease and foreign material etc. complete as
per direction of Engineer-in-charge and in
accordance with applicable specifications

Cement
Qty.(qtl.)
238060 Providing and fixing of raised pavement markers Each 636.27
made of polycarbonate moulded body and
reflective panels with micro prismatic lens made
of polycarbonate with abrasion resistant coating.
The length, weight and width of body shall not
exceed 95 mm, 18mm and 105mm respectively.
The lower surface of the RPM shall be supported
with two nylon shanks, each of length not less
than 25mm. Fixed to the road by using twin
nylon shanks using bituminous adhesive on
bitumen roads or without nylon shanks with
epoxy resin adhesive on concrete roads as per
directions of Engineer Incharge. The RPM should
conform to the quality standards as laid down in
IR Standard Specifications
239010
239020
239030
239040
239050

IR's Unified Standard Schedule Of Rates 2010 Chapter-24 : Fencing And Boundary Marks
CHAPTER - 24 : FENCING AND BOUNDARY MARKS
Cement
Qty.(qtl.)
241010 Supplying at site -
241011 Precast R.C.C. standard posts (for barbed wire Each 504.98
fencing) 1.8m long
241012 Precast R.C.C. standard struts 2.0metres long Each 411.00
241013 Precast R.C.C. standard posts (for palisade Each 392.31
fencing) 1.8m long
241014 Precast R.C.C. standard rails 2.25 metre long Each 274.89
(90mm x 50mm) as per IR Unified Standard
241015 Specifications
Precast R.C.C. standard rails 1.25 metre long Each 116.15
(75mm x 50mm) as per IR Unified Standard
241016 Specifications
Sal ballies of 30cm minimum girth metre 135.02
241017 Casurina post of 30 cm minimum girth metre 107.63
241018 MS angle posts/ struts, of required size, Kg 48.29
including bottom to be split and bent at right
angle in opposite direction for 10cm length and
drilling holes upto 10mm dia. etc. complete
241019 MS angle of required size for rails of palisade Kg 48.29
fencing
241020 Supplying at site -
241021 Welded steel wire fabric of required width Sqm 444.51
rectangular mesh 75x25mm size, weight not
less than 7.75kg/ Sqm painted with two or more
coats of enamel paint of approved shade over a
coat of primer (painting to be paid for
separately)
241022 Chain Link fabric mesh of size 50X50 mm size Sqm 415.31
made of GI wire of 4 mm dia.
241023 Chain Link fabric mesh of size 50X50 mm size Sqm 554.24
made of GI wire of 4 mm dia. PVC coated to
outer dia of 5 mm
Providing and Fixing Fencing
242010 Providing 1.2m high fencing with 1.8m R.C.C. metre 46.47 As per site
Post placed every 3m apart, embedded in condition
cement concrete blocks, every 15th post (or
nearer if there is abrupt change of ground
slope), last but one end post and corner post
shall be strutted on both sides and end post one
side only, and struts embedded in cement
concrete blocks, provided with 5 horizontal
lines and two diagonals of G.I. barbed wire
9.38kg per 100metres (min) between the two
posts fitted and fixed with G.I. staples on turn
buckles or G.I. binding wire tied to 6mm bar
nibs fixed while casting the post (cost of posts,
struts and concrete to be paid for separately)

Cement
Qty.(qtl.)
242020 Providing 1.2m high fencing with 1.8m Sal metre 56.95 As per site
balli/Casurina ballies posts, 30cm girth (min) condition
placed every 2.5m apart, embedded in cement
concrete blocks and every 15th post (or nearer
if there is abrupt change of ground slope) , last
but one end post and corner post shall be
strutted on both sides and end post one side
only, and struts embedded in cement concrete
blocks, provided with 5 horizontal lines and two
diagonals of G.I. barbed wire 9.38kg per
100metres (min) between the two posts fitted
and fixed with G.I. staples driven into the posts
including two coats of coal tarring of ballies
complete (cost of posts, struts, and concrete to
be paid for separately)
242030 Providing 1.8m high fencing with 2.5m sal balli metre 58.00 As per site
posts, 30cm girth (min) placed every 2.5m condition
apart, embedded in cement concrete blocks and
every 15th post (or nearer if there is abrupt
change of ground slope) , last but one end post
and corner post shall be strutted on both sides
and end post one side only, and struts
embedded in cement concrete blocks, provided
with 5 horizontal lines and two diagonals of G.I.
barbed wire 9.38kg per 100metres (min)
between the two posts fitted and fixed with G.I.
staples driven into the posts including two coats
of coal tarring of ballies complete (cost of posts,
struts and concrete to be paid for separately).
242040 Providing 2.4m high fencing with 3.3m sal balli metre 76.42 As per site
posts, 30cm girth (min) placed every 2.5m condition
apart, embedded in cement concrete blocks and
change of ground slope) , last but one end post
and end post one side only, and struts
embedded in cement concrete blocks, provided
with 7 horizontal lines and two diagonals of G.I.
barbed wire 9.38kg per 100metres (min)
between the two posts fitted and fixed with G.I.
staples driven into the posts including two coats
of coal tarring of ballies complete (cost of posts,
struts and concrete to be paid for separately).

Cement
Qty.(qtl.)
242050 Providing 1.2m high fencing with 1.8m angle metre 46.47 As per site
iron 40x40x6mm posts placed every 3m centre condition
to centre embedded in cement concrete blocks
change of ground slope) last but one end post
and end post on one side only, and struts
embedded in cement concrete blocks, and
provided with 5 horizontal lines and two
diagonals interwoven with horizontal GI barbed
wires, of barbed wire 9.38kg per 100 metre
(min) between the two posts fitted and fixed
with G.I. staples, complete (cost of posts, struts
and concrete to be paid for separately).
242060 Providing 1.8m high fencing with 2.4m angle metre 65.72 As per site
iron 50x50x6mm posts placed every 3m centre condition
to centre embedded in cement concrete blocks
every 15th posts (or nearer if there is abrupt
change of ground slope) last but one end post
and end posts on one side only, and struts
embedded in cement concrete blocks, and
provided with 7 horizontal lines and two
diagonals interwoven with horizontal GI barbed
wires, of barbed wire 9.38kg per 100 metre
(min) between the two posts fitted and fixed
with G.I. staples, turn buckles etc. complete
(cost of posts, struts and concrete to be paid for
separately).
242070 Extra for supplying and fixing turn buckles and Each 102.36
straining bolts for barbed wire fencing.
242080 Supplying and fixing of barbed wire weighing per 11.32
9.38 kg per 100 metre (min) on previously metre of
erected posts with wire nails, hooks, stitching barbed
bolts, binding wire etc. straight and/or cross wire
pattern. (Rate includes drilling of holes in the
post wherever required) Note: This item can
also be operated as extra over Items 242010 to
242060 for fixing additional wires to those
stipulated in the respective items.
242090 Erection of precast RCC/MS section/Sal balli Each 39.72
post upto 2 m height including excavation in all
types of soil, filling back loose earth and
consolidating etc. complete for making the post
rigid. Concrete work in foundation to be paid for
separately.

Cement
Qty.(qtl.)
242100 Providing 1.2m high welded steel wire fabric metre 16.74
fencing /chain link fabric with 1.8m posts of
specified material and design placed at every
3m apart embedded in cement concrete blocks
every 15th post (or nearer as per site
conditions), last but one end post and corner
post shall be strutted on both sides and end
post one side only and struts embedded in
cement concrete blocks, provided with welded
steel wire fabric 0.90m wide rectangular mesh
75x25mm size weighting not less than 7.75kg/
Sqm. fixed between the posts fitted and fixed
with G.I. staples on wooden plugs or tied to
6mm bar nibs with G.I. binding wire (cost of
posts, struts welded steel wire fabric, painting,
and concrete to be paid for separately)
242110 Fixing posts (M.S. angle/flat) of any shape over Each 74.97 As per site
top of wall, including making holes in masonry condition
and fixing posts in cement concrete. (Cement
Concrete to be paid separately)
242120 Providing 1.3 metre high concrete rail and pale metre 15.45 As per site
fencing of standard design with 1.8m R.C.C. condition
posts 2.25m rails and 1.25m pales, posts placed
at 2.25m apart (Cost of concrete work, posts,
rails and pales to be paid for separately)
242130 Making tie bar/Boiler tube fencing from old tie quintal 422.45
bars/Boiler tube, supplied by railway, including
straightening, cutting, drilling holes,
rivetting/welding as per approved plan and
depositing the excess scrap in Railway stores.
Note : Due allowance for loss in standard weight
of tie bars will be made while making payments
depending upon condition of the tie bars/boiler
tube.
242140 Fixing and setting chainage, bench marks, apex Each 23.83 As per site
and TP stones in 1:2:4 RCC of approved design. condition
(The pillars, excavation, concrete etc. will be
paid extra)
242150 Providing and fixing 15x15x90cm boundary Each 149.28 As per site
stone of hard stone with 30cm chisel dressed on condition
all four sides and on top (cost of excavation,
refilling and concrete etc to be paid for
separately)
242160 Extra over Item 242150 for engraving letters in cm 2.08
hard stone height
242170 Fixing Grade M-20, RCC Posts/Boards as per As per site
standard design (cost of excavation, refilling, condition
concreting in foundation, painting and engraving
if any to be paid for separately)
242171 Boundary Stones Each 23.83
242172 Kilometre Posts Each 23.83
242173 Hectametre Posts Each 23.83

Cement
Qty.(qtl.)
242174 Gradient Boards Each 23.83
242180 Extra over Item 242170 for engraving letters in cm height 2.50
RCC /letter
242190 Providing and fixing concertina coil fencing with metre 176.85
required dia 600 mm having 50 nos. round per
6 m length upto 3m height of wall with existing
angle iron ‘Y’ shaped placed 2.4 m or 3.00 m
apart and with 9 horizontal R.B.T. stud tied with
G.I. staples and G.I. clips to retain horizontal
including necessary bolts or G.I. barbed wire
tied to angle iron all complete as per direction of
Engineer-in-charge with reinforced barbed tape
(R.B.T.) / Spring core (2.5mm thick) wire of
high tensile strength of 165 kg/ sq.mm. with
tape (0.52 mm thick) and weight 43.478gm/
metre (cost of M.S. angle, C.C. blocks shall be
paid separately)
242200 Providing & fixing half bamboo jafri without gap Sqm 133.66
of 20 to 25mm dia bamboos of good quality
fixed half cut vertically to horizontal wooden
batten of size 25mm to 40mm of ordinary wood
with nails including two coats of painting with
primer including all lead lift loading unloading
all taxes all L&M, T&P as a complete job
242210 Providing & fixing full bamboo jafri without gap Sqm 203.03
of 20 to 25mm dia bamboos of good quality
fixed vertically to horizontal wooden batten of
size 25mm to 40mm of ordinary wood with nails
including two coats of painting with primer
including all lead lift loading unloading all taxes
all L&M, T&P as a complete job
243010
243020
243030
243040
243050
243060
243070
243080
243090
243100

IR's Unified Standard Schedule Of Rates 2010 Chapter-25 : Supply Of Materials
CHAPTER - 25 : SUPPLY OF MATERIALS

Roof and Ceilings
251010 Asbestos fibre cement corrugated sheet 6mm thick Sqm 361.10
251020 Asbestos fibre cement close fitting adjustable ridge metre 339.83
251030 Asbestos fibre cement corrugate serrated adjustable ridge metre 403.20
251040 Asbestos fibre cement plain wing adjustable ridge metre 421.35
251050 Asbestos fibre cement unserrated adjustable ridge for hips metre 456.94
251060 Asbestos fibre cement north light curves metre 395.50
251070 Asbestos fibre cement ventilator curves Each 497.57
251080 Asbestos fibre cement barge boards 6 mm thick metre 345.00
251090 Asbestos fibre cement ridge finial Pair 178.41
251100 Asbestos fibre cement S type louvers Each 355.42
251110 Asbestos multi purpose fibre cement board 6mm thick. (Flat Sqm 235.75
AC sheet)
251120 3 mm thick translucent white acrylic plastic sheet Sqm 688.56
251130 Mangalore ridge tiles 20mm thick Each 37.38
251140 Mangalore tiles 20mm thick Each 16.87
251150 Glass tiles Mangalore Pattern Each 102.35
251160 Corrugated Galvanised Sheets of any thickness quintal 6008.75
251170 Galvanised steel plain sheets of any thickness quintal 5405.00
251180 Standard quality hard board sheet 4.5 mm thick Sqm 297.08
251190 Thermocol sheets of various standard sizes 20mm thick Sqm 25.30
Building Materials
252010 Surkhi cum 575.00
252020 Moorum cum 373.75
252030 Ordinary Portland Cement grade-53 Grade MT 6325.00
252040 Ordinary Portland Cement grade-43 MT 5750.00
252050 Pozzolana Portland Cement (fly ash) MT 5635.00
252060 Pozzolana Portland Cement MT 5635.00
252070 White Cement MT 13512.50
252080 Stone Aggregate broken : 50 mm nominal size cum 756.13
252120 Coarse sand (Minimum zone III ) cum 412.08
252130 Fine sand (Zone IV) (Ordinary Sand) cum 354.58
252140 Local sand / pit sand/yamuna sand for filing purposes cum 345.00
252150 Red Bajri cum 718.75
252160 Coal Tar litre 33.73
252170 Unslaked lime quintal 517.50


252180 Dehradun white lime quintal 705.33
252190 Satna lime quintal 718.75
252200 F.P.S. bricks class designation 7.5 1000 Nos. 2645.00
252210 F.P.S. bricks class designation 5.0 1000 Nos. 1955.00
252220 F.P.S. bricks tile class designation 10.0 1000 Nos. 2990.00
252230 Machine moulded FPS tile bricks of class designation 12.5 1000 Nos. 3335.00
252240 Mild steel round bar 12 mm dia and below quintal 3795.00
252250 Mild steel round bar above 12 mm dia quintal 3737.50
252260 Twisted steel / deformed bars Gr. Fe 415 (TMT Bars or quintal 3852.50
HYSD Bars.)upto 12mm dia
HYSD Bars.) over 12mm dia
HYSD Bars.)upto 12mm dia
HYSD Bars.) over 12mm dia
252300 Mild steel square bars quintal 4025.00
252310 Fibre glass tissue reinforcement Type II Grade I Kg 69.00
252320 Mild Steel Binding wire as per IS 280 Kg 54.63
252330 Extruded burnt flyash clay sewer bricks conforming to IS 1000 Nos. 4772.50
4885-1988
252340 All in One Bajri aggregate 20 mm size cum 747.50
252350 Boundary stone (Sand stone variety.) top chisel dressed Each 124.20
15x15x90 cm
252360 Red sand stone block 10 cudm 129.05
252370 White sand stone block 10 cudm 119.22
252380 Sand stone slab 45 mm to 50 mm thick (un-dressed) Sqm 300.92
252390 Stone Boulder Weighing minimum 35 Kg Each cum 498.33
252400 Stone sets 23X15X15cms size 1000 Nos. 546.25
252410 Stone setts of size 25X12.5X10 cms 1000 Nos. 560.63
252420 Cudappah slab unpolished 65-80 mm thick Sqm 942.62
Wood Work / Doors And Windows
253010 Hydraulic door closer ISI marked (IS:3564-1996) Each 481.08

253020 Welded mesh 50X25mm (10 SWG) MS Sqm 332.06
253030 Fly proof wire mesh Sqm 310.50
253040 MS Grill Kg 67.56
253050 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos. 690.00
253060 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos. 552.00
253070 Brass butt hinges (light/ordinary type):75x40x2.5 mm 10 Nos. 327.75
253080 Brass tower bolt (barrel type) 250x10 mm Each 284.63
253090 Brass tower bolt (barrel type) 200x10 mm Each 240.06
253100 Brass handles 100 mm with plate 150x32 mm Each 69.00
253110 Brass handles75 mm with plate 125x32 mm Each 57.50
253120 Brass hard drawn hooks and eyes 250 mm 10 Nos. 776.25


253130 Brass casement stays (straight peg type) 250 mm weighing Each 112.13
not less than 0.28 kg
253140 Brass helical spring 150 mm Each 406.33
253150 Chromium plated Brass curtain rod 20 mm dia 1.25mm metre 356.50
thick
253160 Chromium plated Brass curtain rod 25 mm dia 1.25mm metre 540.50
thick
253170 Bright finished or black enameled mild steel butt hinges 100 10 Nos. 139.92
x 58 x1. 90 mm
x 47 x 1.70 mm
x 37 x 1.50 mm
253200 Bright finished or black enameled mild steel screws 50 mm 100 Nos. 96.31
253210 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 10 Nos. 207.00
marked
253220 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 10 Nos. 120.75
marked
253230 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 10 Nos. 103.50
marked
253240 Bright finished or black enameled mild steel screws 40 mm 100 Nos. 81.36
253250 Nickel plated mild steel piano hinges 1 mm thick 35 mm metre 53.48
wide
253260 Oxidised mild steel sliding door bolt 300x16 mm Each 91.71
253270 Oxidised mild steel sliding door bolt 250x16 mm Each 77.05
253280 Oxidised mild steel tower bolt (barrel type) 250x10 mm Each 62.68
253310 Oxidised mild steel handles 125 mm Each 18.69
253320 Oxidised mild steel handles 100 mm Each 14.66
253330 Oxidised mild steel screws 40 mm 100 Nos. 66.13
253360 Anodised Aluminium sliding door bolt 300x16 mm Each 240.06
253370 Anodised Aluminium sliding door bolt 250x16 mm Each 194.06
253380 Anodised Aluminium tower bolt (barrel type) 300x10 mm 10 Nos. 707.25
253410 Anodised Aluminium tower bolt (barrel type) 150x10 mm. 10 Nos. 402.50
253430 Anodised Aluminium handles 125 mm with plate 175 x 32 10 Nos. 442.75
mm
253440 Anodised Aluminium handles 100 mm with plate 150 x 32 10 Nos. 373.75
mm
253450 Anodised Aluminium handles 75mm with plate 125 x 32 10 Nos. 304.75
mm
253460 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm Each 115.00


253470 Nails 25-100mm long Kg 52.13
253480 Nails Upto 25mm long Kg 52.13
253490 Glass beads of metal Kg 97.75
253500 1 mm thick 35mm wide bright finished stainless steel piano metre 34.50
hinges
253510 Block board construction flush door with commercial ply on Sqm 920.00
both faces 35 mm thick
253540 Second class teak wood in scantling 10 cudm 663.55
253550 Second class teak wood in planks 10 cudm 759.00
253560 Second class kail wood in scantling 10 cudm 224.25
253570 Second class kail wood in planks 10 cudm 230.00
253580 Hollock wood in scantling 10 cudm 356.50
253590 Hollock wood in planks 10 cudm 287.50
253600 Sal wood in scantling 10 cudm 356.50
253610 1.0mm thick decorative laminated sheet (Mat finish) Sqm 446.58
253620 1.0mm thick decorative laminated sheet (Glossy finish) Sqm 405.38
253630 Oxidised M.S. safety chain with hook etc complete. Each 63.25
(weighing not less 450 gms) for door
253640 Water proof ply 12mm thick Sqm 662.40
253650 UV stabilised 2mm thick plain/corrugated GFRP sheet Sqm 730.25
253660 Float glass sheet of nominal thickness 4 mm (weight not Sqm 420.90
less than 10kg/sqm)
253670 Float glass sheet of nominal thickness 5.5 mm.(weight not Sqm 486.57
less than 13.50 kg/sqm)
253680 Frosted glass sheet of nominal thickness 4 mm (weighing Sqm 408.25
not less than 10 kg/sqm)
253690 Glass sheet (Pin headed) 4 mm thick Sqm 272.55
253700 Transparent acrylic sheet of approved quality 5mm thick Sqm 617.17
253710 Ply wood 5 ply with commercial ply on both faces 6 mm Sqm 388.13
thick
253720 Hydraulic door closer bottle type M.S. body with necessary Each 632.50
accessories and screws complete
253730 Anodised Aluminium hanging type door stopper Each 23.00
253740 Galvanised wire mesh of average width of aperture 1.4 mm Sqm 205.85
and nominal dia of wire 0.63 mm (Mosquito Proof)
253750 White face insulating board:12 mm thick / perforated Sqm 341.17
253760 Natural colour insulating board:12 mm thick Sqm 274.08
253770 Flat pressed 3 layer and graded particle board (medium Sqm 379.50
density) Grade 1 conforming to IS : 3087 - 18 mm thick
253780 25 mm thick particle board Sqm 494.50
253790 Second class deodar teak wood lipping 30 mm width x 12 metre 17.25
mm


253800 Veneered particle board with commercial veneering on both Sqm 488.75
sides 12 mm thick
253810 Structural steel such as tees, angles channels and R.S. quintal 3910.00
joists and all like materials
253820 Flats up to 10 mm in thickness quintal 3795.00
253830 Flats exceeding 10 mm in thickness quintal 3737.50
253840 Mild steel plates 6 mm and above quintal 4255.00
253850 Mild steel sheets below 6mm quintal 4347.00
253860 Mild steel expanded metal 20x60 mm strands Sqm 253.00
253870 Nut and bolts with washers of all sizes Kg 77.63
253880 4mm thick phenol bonded Bamboo Mat board (595mm X Sqm 754.26
595mm) conforming to IS : 13958-1994
253890 9mm thick phenol bonded Bamboo Mat Board conforming Sqm 1270.75
to IS : 13958-1994
253900 12mm thick phenol bonded Bamboo Mat Board conforming Sqm 1236.25
to IS : 13958-1994
253910 Veneered Bamboo particle board-both side commercial
veneer SOGP grade ii conforming to IS : 3097-1980
253911 9 mm thick veneered Bamboo particle board-both side Sqm 517.50
commercial veneer SOGP grade ii conforming to IS : 3097-
1980
253912 12mm thick veneered Bamboo particle board-both side Sqm 544.67
1980
1980
1980
253920 3.5 to 4mm thick Bamboo Mat corrugated sheet conforming Sqm 1213.25
to IS : 15476-2004
253930 3.5 - 4mm thick bamboo mat ridge cap (BMRC) metre 977.50
Distempers Paints and Varnishes
254010 Linseed oil (double boiled) litre 107.53

254020 Cement primer litre 109.25
254030 Distemper primer litre 112.13
254040 Pink primer (for wood) litre 99.19
254050 Aluminium paint in two containers litre 158.13
254060 Anticorrosive bituminous paint (black) litre 93.44
254070 Synthetic Enamel paint in all shades litre 166.75
254080 Plastic emulsion paint litre 211.31
254090 Roofing paint for iron sheets in red colour litre 146.63
254100 Dry distemper Kg 43.13
254110 Oil bound washable distemper / Acrylic distemper Kg 76.19
254120 Water proofing cement paint / snowcem Kg 48.59
254130 Ordinary varnish litre 103.50


254140 Premixed super white gypsum plaster Kg 13.80
254150 Plaster of Paris Kg 7.19
254160 Premium Acrylic exterior paint litre 280.31
254170 Textured exterior paint litre 253.86
254180 Metal Primer litre 129.38
254190 Red oxide Zinc chromate primer litre 98.13
254200 Superior quality road marking paint litre 205.28
Roads, Floors, Pavements & Manholes
255010 Paving bitumen of penetration 80/100 of approved quality MT 39782.33

255020 Bitumen emulsion medium setting as per IS:8887 & having MT 26258.96
a minimum bitumen content of 65 %
255030 Stone chippings / screenings 4.75 mm nominal size cum 1763.33
255040 Stone chippings / screenings 12.5/13.2 mm nominal size cum 1322.50
255050 Modified Bitumen Refinery produced CRMB-60 MT 43383.75
255060 Rectangular shape 600x450 mm precast RC.C. manhole Each 828.00
cover with frame - L.D. - 2.5 (As per drawing)
255070 Square shape 350x350 mm precast RC.C. manhole cover Each 776.25
with frame - L.D. - 2.5 (As per drawing)
255080 Circular shape 450 mm dia precast RC.C. manhole cover Each 914.25
with frame - L.D. - 2.5 (As per drawing)
255090 Rectangular shape 500x500 mm precast RC.C. manhole Each 1071.42
cover with frame - M.D. - 10 (As per drawing)
with frame -M.D.-10 (As per drawing)
with frame - H.D. - 20 (As per drawing)
255120 Circular shape 560 mm dia precast R.C.C. manhole cover Each 1730.75
with frame - E.H.D. - 35 (As per drawing)
255130 Precast RC.C. grating with frame 500x450 mm horizontal Each 713.00
grating
255140 Precast RC.C. grating with frame 450x100 mm vertical Each 540.50
grating
255150 Precast terrazzo tiles 22 mm thick (light shade) Sqm 200.10
255160 Precast terrazzo tiles 22 mm thick(medium shade) Sqm 265.22
255170 Precast terrazzo tiles 22 mm thick (dark shade) Sqm 254.44
255180 Water proofing compound (pH>7, Sp.Gravity 1.06±0.02, litre 113.16
conforming to IS:2645)
255190 Glass strip 4 mm-5mm thick 40 mm deep metre 11.50
255200 Interlocking C.C. paver block 60 mm thick, (M-30) (10 Sqm Sqm 414.00
area will be laid and nos./sqm will be assessed for
accordingly). The blocks will be placed as closely as
possible without any gap for joints.
255210 Precast pavement slab 450x450x50mm (M-30) Each 78.20
255220 Precast C.C. kerb stone M-25 cum 4600.00
255230 8 mm thick granite stone tiles (mirror polished of all Sqm 854.22
shades)
255240 8 mm thick marble tiles (polished) white Sqm 526.13


255250 White marble slab Makrana quality plain veined 18 mm Sqm 607.20
thick (slabs to be larger than 0.5 Sqm area)
255260 Udaipur green marble slab plain or alike slabs 18mm thick Sqm 724.50
(slabs to be larger than 0.5 Sqm area)
255270 Black Zebra marble slab plain or alike slabs 18mm Sqm 699.97
thick(slabs to be larger than 0.5 Sqm area)
255280 Country tiles 150X150X12mm thick 1000 nos. 558.33
255290 White glazed Ceramic wall tiles conforming to Group B-III Sqm 382.57
of IS 15622
255300 Ceramic Tiles
255301 Of Group B-I-b of IS: 15622 (Ceramic Porcelain Tiles) of Sqm 473.80
size 300x300mm to 400x400mm
255302 Of Group B-I-b of IS: 15622 (Ceramic Porcelain Tiles) of Sqm 651.67
size above 400x400mm upto 600x600 mm
255303 Of Group B-I-a of IS: 15622 (Vitrified tiles) of size upto Sqm 661.25
400x400 mm
255304 Of Group B-I-a of IS: 15622 (Vitrified tiles) of size above Sqm 776.25
400x400mm upto 600x600 mm
255305 Of Group B-II Clause 5.1 (for abrasion resistance) of IS: Sqm 414.00
15622 (Ceramic floor Tiles) of size 300x300mm
255306 Of Group B-II Clause 5.1 (for abrasion resistance) of IS: Sqm 501.40
15622 (Ceramic floor Tiles) of size 400x400mm & above
255310 Granite black 18 mm thick slab, above 0.2 sqm up to 0.5 Sqm 1759.50
sqm (area-wise)
Water Supply
256010 G.I. pipes 15 mm dia medium class metre 80.36
256070 Miscellaneous G I pipe fittings as nipples/ elbows/ sockets/ Kg 115.00
bends for GI pipe work.
256080 P.T.M.T. Grating square slit 150mm ( Poly Tetra Methylene Each 82.42
Terephthalate)
256090 P.T.M.T Urinal cock 15 mm dia (Poly Tetra Methylene Each 112.32
Terephthalate)
256100 P.T.M.T. Bibcock with nozzle 15 mm Each 156.11
256110 P.T.M.T. Stop cock (concealed) 15 mm Each 221.38
256120 P.T.M.T. extension nipple 15 mm Each 37.57
256130 P.T.M.T. extension nipple 20 mm Each 50.89
256140 15 mm PTMT ( Poly Tetra Methylene Terephthalate) bib Each 125.64
cock
256150 15 mm PTMT bib-cock long body with flange Each 214.48
256160 15 mm dia PTMT stop cock(male thread) Each 133.11
256170 20 mm dia. PTMT stop cock ( Poly Tetra Methylene Each 188.31
Terephthalate)


256180 PTMT push cock 15 mm dia. ( Poly Tetra Methylene Each 122.76
Terephthalate)
256190 PTMT 125 mm grating with waste hole Each 50.22
256200 C.P.Brass bibcock 15mm Each 400.20
256210 C.P.Brass long nose bibcock 15mm Each 392.73
256220 C.P.Brass long body bibcock 15mm Each 364.17
256230 C.P.Brass stop cock (concealed) 15mm Each 335.03
256240 C.P.Brass angle valve 15mm Each 384.96
256250 Miscellaneous G I pipe fittings as nipples/ elbows/ sockets/ Kg 96.60
bends joints for PTMT pipe work
256260 Full way brass valve with wheel15 mm dia Each 215.63
256270 15 mm nominal dia C P brass mixer Pillar Tap of weight Each 590.33
approx. 2 Kg
256280 15 mm nominal dia 85 mm long 102 mm high PTMT bibcock Each 230.00
with washers complete Wt. approx. 90 gms
Sanitary Fittings & Drainage Items
257010 S.C.I. soil, waste and vent single socketed pipe1.80 m long Each 925.18
: 75mm dia
257020 S.C.I. soil, waste and vent single socketed pipe1.80 m long Each 923.45
: 100mm dia
257030 S.C.I soil, waste and vent single socketed pipe1.80 m long : Each 1779.63
150mm dia
257040 S.C.I. Slotted cowl (terminal guard) 75/100 mm dia Each 245.72
257050 Polyethylene Vinyl Chloride water storage tank with cover litre 7.33
and suitable locking arrangement
257060 Unplasticised P.V.C. connection pipe with brass union 45 cm Each 41.67
long 15 mm bore
257070 Unplasticised P.V.C. connection pipe with brass union 45 cm Each 50.60
long 20 mm bore
257080 Standard holder bat clamps for sand cast iron or cast iron Each 36.42
pipes upto150 mm dia of any size as specified
257090 S&S C.I. standard specials upto 300 mm dia (heavy class) quintal 5520.00
257100 Flanged C.I. standard specials upto 300 mm dia (heavy quintal 5807.50
class)
257110 Pig lead Kg 129.38
257120 Ductile iron Class K-9 pipe conforming to IS-8329 100mm metre 805.00
dia.
dia.
dia.
dia.
257160 S&S C.I. Pipe Specials as per IS 1538 suitable for lead quintal 6181.25
jointing up to 300mm dia
257170 S&S C.I. Pipe specials suitable for mechanical joint as per quintal 6900.00
I.S. 13382 up to 300mm dia


257180 Screwed double flanged centrifugally cast (spun) C.I. Pipe metre 1495.00
of Class B conforming to I.S. 1536 - 100mm dia
257220 Rubber packing / insertion washers of all sizes and Kg 63.25
thickness
257230 RC.C. pipes NP2 class 150 mm dia with collars metre 161.00
257240 RC.C. pipes NP2 class 250 mm dia with collars. metre 226.16
257250 Stoneware pipes grade A (60 cm long) 150 mm dia Each 101.97
257260 Stoneware pipes grade A (60 cm long) 200 mm dia Each 167.13
257270 Stoneware pipes grade A (60 cm long) over 200 mm dia Each 329.67
including 300 mm dia
257280 Stone ware spouts 100 mm dia 60 cm long Each 48.30
257290 U-PVC pipes (working pressure 4 kg/cm2 )Single socketed metre 93.53
pipe 75m dia
257300 U-PVC pipes (working pressure 4 kg/cm2 )Single socketed metre 159.85
pipe 110mm dia
257310 UPVC coupler for UPVC drainage pipes 75 mm Each 47.32
257320 UPVC coupler for UPVC drainage pipes 110 mm Each 72.48
257330 UPVC plain shoe 75 mm bend Each 104.31
257340 UPVC plain shoe 110 mm bend Each 183.17
257350 UPVC pipe clip 75 mm bend Each 19.32
257360 UPVC pipe clip 110 mm bend Each 28.21
257370 Miscellaneous UPVC fittings Kg 287.50
257380 White plastic W C seat (solid) with lid C.P. brass hinges and Each 451.38
rubber buffers
257390 Black plastic seat (solid) with lid C.P. brass hinges and Each 411.13
rubber buffers
257400 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia Each 195.50
257410 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia Each 270.25
257420 15 mm C.P. brass tap short length Each 218.50
257430 C.P. brass toilet paper holder of standard size Each 187.83
257440 HP. or L.P. ball valve with polythene floats: 15 mm dia Each 207.00
257450 H.P. or L.P. ball valve with polythene floats: 20 mm dia Each 230.00
257460 H.P. or L.P. ball valve with polythene floats: 25 mm dia Each 391.00
257470 Vitreous china flat back wash basin 630x450 mm (White) Each 761.88
257480 Vitreous china angle back wash basin 600x480 mm (White) Each 769.06
257490 Vitreous china angle back wash basin 400x400 mm (White) Each 491.63
257500 Vitreous china Indian type w.c. pan size 580 mm (White) Each 454.25
257510 Vitreous china orrisa type w.c. pan size 580 mm (White) Each 951.63
257520 Vitreous china pedestal type water closet (White) Each 729.10
257530 Vitreous china foot rests 250x125x25 mm (White) pair 105.03


257540 32 mm nominal dia. flush pipes with clamps for high level Each 112.13
flushing cisterns with unplasticised PVC tube
257550 C.I. bracket for wash basin and sinks pair 75.52
257560 Brass bib-cock 15 mm dia Each 204.32
257570 Brass bib-cock 20 mm dia Each 230.00
257580 Brass stop-cock 15 mm dia Each 236.52
257590 Brass stop-cock 20 mm dia Each 302.83
257600 Mosquito proof coupling of approved design Each 34.50
257610 Vitreous china foot rests 250x130x30 mm (White colour) pair 184.00
257620 C.I. grating 100x100 mm Each 57.50
257650 Vitreous china pedestal for wash basin (White colour) Each 805.00
257660 600x120 mm glass shelf with anodised aluminium angle Each 235.75
frame, C.P brass brackets and guard rail of standard size
257670 Vitreous china toilet paper holder of standard size Each 264.50
257680 Vitreous china 10 litres, low level cistern without fittings Each 1104.00
(White)
257690 Vitreous china 10 litres low level cistern with fittings Each 1638.75
(White)
257700 Coloured Orissa pattern W.C. pan 580x440 mm Each 1353.17
257710 Coloured Pedestal type W.C. pan 580x440 mm (European Each 1095.57
type)
257720 Coloured Vitreous china 10 lit. low level cistern Each 1474.30
257730 Coloured (other than black)solid P.V.C. seat in European Each 476.52
W.C. pan
257740 Circular shape 450 mm dia Mirror with Plastic moulded Each 477.25
frame
257750 Rectangular shape 453x357 mm Mirror with Plastic moulded Each 418.31
frame
257760 Mirror of superior make glass 60x45 cm (With 5-6mm thick Each 477.25
base complete)
257770 Semi Rigid PVC waste pipe for sink and wash basin 32 mm Each 26.83
dia with length not less than 700 mm i/c PVC waste fittings
257780 Semi Rigid PVC waste pipe for sink and wash basin 40 mm Each 47.73
dia with length not less than 700 mm i/c PVC waste fittings
257790 Coloured High density polyethylene poly propylene 10 lit. Each 770.50
(full flush) capacity controlled low level flushing cistern with
fittings
257800 White Vitreous china 10 lit. (full flush) capacity controlled Each 1242.00
low level flushing cistern with all fittings
257810 Flushing Cistern P.V.C. 10 litres capacity (low level) (White) Each 732.17
(with fittings, accessories and flush pipe)
257820 P.V.C. automatic flushing cistern 5 litres capacity (With Each 594.17
Fittings)
257830 White glazed fire clay draining board 600x450x25 mm Each 531.88


257840 White vitreous china clay half stall urinal flat back Each 1236.25
580x380x350 mm or angle back 450x375x350 mm with
waste fittings as per IS : 2556
257850 C P brass Waste coupling 32/40 MM Each 84.72
257860 CP brass Bottle Trap 32/40 MM Each 423.58
257870 C P brass Towel Ring 215x200x (37 mm from wall) Each 141.07
complete with fixing arrangements
257880 CP brass Towel Rail (450MM) (With brackets and fixing 7505 228.47
arrangements)
257890 CP brass Towel Rail (600MM) (With brackets and fixing Each 263.73
arrangements)
257900 CP brass Shelf 450x124x36mm (With brackets and fixing Each 304.37
arrangements)
257910 CP brass Soap Dish/Holder 138x102x75mm (With brackets Each 134.93
and fixing arrangements)
Hand Pump Accessories
258010 Bucket leather best quality for hand pumps. 65mm dia. Each 27.31
258020 Bucket leather best quality for hand pumps 89mm dia. Each 38.24
258030 Handle C.I. of standard shape and size for hand pump No.6 Each 287.50
of approved make with bolts and nuts 10mm x 65mm one
number in Each
258040 Plunger C.I. 89mm with M.S rod 12mm dia x 450mm long Each 488.75
complete with leather bucket 89mm dia for pump No.6
258050 Strainer brass 40 mm dia 1.5 M long for hand pumps Each 756.13
258060 All brass cylinder 65mm outer dia. 450 long complete with Each 1129.88
all brass plunger, plungers rod socket, all brass
poppet/lower valve and bucket leather for deep tube well
pump
258070 12mm round M.S. galvanised connecting rod both ends Each 220.80
threaded 3.05 Ms long complete with one G.I. coupling
50mm long fitted one in Each length
258080 Coupling C.I. 50mm long for 12mm dia connecting rod Each 23.00
258090 Leather seat valve 100mm dia best quality complete with Each 157.17
C.I. weight and G.I. bolts 6mm x 20mm one number in
Each
258100 India Mark-II pump as per IS – 9301 complete in all respect Each 7787.42
including hand pump, cylinder, 6 no. connecting rods of
approved quality
258110 Inspection cover for India Mark-II deep well pump Each 180.17
258120 Chain with coupling for India Mark-II deep well pump Each 143.75
258130 M.S. galvanised handle for India Mark-II deep well pump Each 191.67
(without bearing and chain)
258140 C.I. cylinder with brass liner complete with gun metal Each 709.17
plunger with leather/mitryl rubber lower valve and plunger
rod complete as per ISS-9301-90.( 20-50mts depth)
258150 Hand pump No.6 complete with C.I. head and handle and Each 2803.13
C.I. plunger and C.I plunger rod with C.I. plunger 89 mm
including one leather bucket 89 mm complete best quality
258160 Base C.I. heavy 40mm bore for hand pump No.6 Each 316.25


Miscellaneous
259010 Special Chicks bamboo, lined with blue cloth with tapes, Sqm 324.88
fixed in place with pulleys and ropes complete
259020 Chicks bamboo, without lining cloth but bound with broad Sqm 233.45
tape 5cm fixed in place with pulleys and ropes complete
259030 Bamboo ladders with side poles, not less than 50 mm dia Each 279.45
and rungs, not less than 40 mm dia and 30 cm apart of
lengths. 4 m Long
259040 Chain link fabric fencing mesh of size 50x50mm made of Sqm 280.60
G.I. wire of dia. 4mm
259050 Chain link fabric fencing mesh of size 25x25mm made of Sqm 335.42
G.I. wire of dia. 3mm
259060 Plastic cane Kg 127.65
259070 Bleaching powder quintal 2031.67
259080 Galvanised steel barbed wire quintal 5520.00
259090 Polyvinyl chloride sheet 400 micron thick Sqm 47.92
259100 Circular C.I. Box for ceiling fan and concealed wiring etc. Each 47.15
259110 Chlorpyriphos 20% E.C. I Lindane 20% E.C. For termite litre 308.58
treatment
259120 Aluminium T or L section or any other shapes for misc. Kg 329.19
works
259130 Eucalyptus / Safeda ballies 125 mm dia mini 4mt. Long metre 83.38
259140 Casurina ballies/ posts 100 mm average dia metre 106.57
259150 Sal wood ballies average 100 mm dia metre 92.00
259160 Bamboos 50-75 mm dia 3-6m long metre 67.85
259170 Bamboo matting Sqm 105.03
259180 Cement Concrete Jali 40 mm thick Sqm 277.92
259190 Hollock/Poplar ballies 125 mm average dia. metre 71.30
259200 Wire mesh (rabbit) Sqm 71.88
259210 Polyester triangular Synthetic fibre (6 to 18mm in length) Kg 386.40
for mixing in cement works
259220 Supply of Galvanised Steel wire ropenet, made of 9mm dia Sqm 552.00
steel wire rope having aperture size of 45cm x 60cm with
6m length hangs
259230 Supply of Erosion Control Geomat (for surfacial erosion Sqm 138.00
control) consisting of 2 layers of polymeric netting, having
aperture size of 20mm x 20mm and a middle layer of coir
as per Specifications. Max. width of rolls/each composite
mat shall be 5m
259240 Supply of Mechanically Woven Double Twisted Hexagonal Cum 1725.00
Shaped Wire Mesh Gabion Boxes of required sizes, Mesh
Type 10mm x 12mm, Zn and PVC coated Mesh Wire
dia.2.7/3.7mm (ID/OD), edges of meshes mechanically
edged / selvedged with heavy coating of galvanization as
per EN 10223-3/ASTM A 975 with partitions at every 1m
interval


259250 Supply of Polypropylene Tarred Rope Gabion, fabricated Cum 1725.00
from 9mm dia. rope, 100mm x 100mm Mesh with partitions
at every 1m interval
259260 Supply of Biaxial Geo-grid, made from virgin high density Sqm 287.50
polypropylene, having aperture size of 65mmx 65mm and
ultimate tensile strength of 30 kN/m with minimum junction
efficiency of 95% & minimum radial stiffness of 350 kN/m
(@0.5% strain)
259270 Supply of Woven Geotextile made from polypropylene Sqm 128.80
multifilament yarn, having minimum mass of 220 GSM &
ultimate tensile strength of 40 kN/m with puncture
resistance of 600 N and apparent opening size of 150
microns
259280 Supply of Epoxy Items :
259281 Magnesium poly phosphate based concrete fast repair Kg 921.44
259282 epoxy
Gungrade, polyerothane grade crack sealer Milli litre 3.19
259283 Bisphenol Polyerothane coating of 100% epoxy Kg 3041.75
259284 Two components anti slip epoxy Gallon 14179.50
259285 Bisphenol and butyl based epoxy Kg 1538.13
259290 Non - Asbestos fibre cement corrugated apron piece metre 249.79
259300 Non - Asbestos fibre cement eaves filler piece Each 232.88
259310 Non - Asbestos fibre cement special north light curves Each 614.88
259320 Non - Asbestos multi purpose fibre cement board 8mm Sqm 274.85
thick
259330 Polypropylene-Random-Co-Polymer (PPR) pipes SDR 7.4-16 metre 52.04
Outer dia
259340 Polypropylene-Random-Co-Polymer (PPR) pipes SDR 7.4- metre 56.98
20mm Outer dia
25mm Outer dia
32mm Outer dia
40mm Outer dia
50mm Outer dia
63mm Outer dia
75mm Outer dia
90mm Outer dia
259420 Polypropylene-Random-Co-Polymer (PPR) pipes SDR -11- metre 1394.95
110mm Outer dia
259430 Polypropylene-Random-Co-Polymer (PPR) pipes SDR -11- metre 2832.83
160mm Outer dia
259440 Non - Asbestos fibre cement corrugated sheet 6mm thick Sqm 361.10
259450 Non - Asbestos fibre cement close fitting adjustable ridge metre 339.83
259460 Non - Asbestos fibre cement corrugate serrated adjustable metre 403.20
259470 ridge
Non - Asbestos fibre cement plain wing adjustable ridge metre 421.35


259480 Non - Asbestos fibre cement unserrated adjustable ridge for metre 456.94
hips
259490 Non - Asbestos fibre cement north light curves metre 395.50
259500 Non - Asbestos fibre cement ventilator curves Each 497.57
259510 Non - Asbestos fibre cement barge boards 6 mm thick metre 345.00
259520 Non - Asbestos fibre cement ridge finial pair 178.41
259530 Non - Asbestos fibre cement S type louvers Each 355.42
259540 Non - Asbestos multi purpose fibre cement board 6mm Sqm 235.75
thick
259610
259620
259630
259640
259650
259660
259670
259680
259690
259700
259710

Ser Sor 2010

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Ser Sor 2010

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ser Sor 2010

Uploaded by

Copyright:

Available Formats

भारत सरकार

South Eastern Railway

Item No. Description of Item Unit Rate (Rs.)

Item No. Description of Item Unit Rate (Rs.)

Item No. Description of Item Unit Rate (Rs.)

Item No. Description of Item Unit Rate (Rs.)

Item No. Description of Item Unit Rate (Rs.)

Item No. Description of Item Unit Rate (Rs.)

New Items To Be Added By Zonal Railways

CHAPTER - 2 : CARRIAGE OF MATERIALS

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

021090 Leading ballast, kankar, brickbats, stone-chips, shingle, Cum 88.58

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

021220 Loading/Unloading ballies of all varieties including lead

Item No. Description Of Item Unit Rate (Rs.)

021310 Leading heavy articles such as wooden or steel Each 73.39

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

021550 Hiring of Road Crane of 25 MT capacity including Hour 1344.65

New Items To Be Added By Zonal Railways

CHAPTER - 3 : PLAIN CONCRETE

031010 Providing and laying in position cement concrete

New Items To Be Added By Zonal Railways

CHAPTER - 4 : REINFORCED CEMENT CONCRETE

CHAPTER - 5 : BRICK WORK

EXPOSED BRICK WORK

CHAPTER - 6 : STONE WORK

New Items To Be Added By Zonal Railways

CHAPTER - 7 : WOOD WORK

M.S. FITTINGS - BRIGHT SATIN FINISH :

075131 300mm weighing not less than 200 gm Each 42.64

076010 Providing and fixing ISI: 12817 marked stainless

BRASS FITTINGS - BRIGHT SATIN FINISH :

CHAPTER - 8 : STEEL AND ALUMINIUM WORK

CHAPTER - 9 : FLOORING, PAVING AND DADO

CEMENT CONCRETE FLOORING

MARBLE & KOTA STONE FLOORING

098073 LP stud range conforming to IS: 809 size Sqm 921.03

CHAPTER - 10 : ROOFS AND CEILINGS

A.C. SHEET ROOFING & A.C. Accessories

NON-A.C. SHEET ROOFING & Accessories

6 of 29 : Chapter-10 Page 100

7 of 29 : Chapter-10 Page 101

8 of 29 : Chapter-10 Page 102

9 of 29 : Chapter-10 Page 103

10 of 29 : Chapter-10 Page 104

11 of 29 : Chapter-10 Page 105

12 of 29 : Chapter-10 Page 106

13 of 29 : Chapter-10 Page 107

14 of 29 : Chapter-10 Page 108

15 of 29 : Chapter-10 Page 109

16 of 29 : Chapter-10 Page 110

17 of 29 : Chapter-10 Page 111

18 of 29 : Chapter-10 Page 112

19 of 29 : Chapter-10 Page 113

20 of 29 : Chapter-10 Page 114