Ussr

GOVERNMENT OF INDIA
Hkkjr ljdkj
MINISTRY OF RAILWAYS
jsy ea=ky;
Indian Railways
Unified Standard Schedule
of Rates
(Earthwork in Cutting & Embankment, Bridge Work
and P.Way Works)
Engineering Department
2019
Indian Railways Unified Standard Schedule of Rates For Earthwork in
Cutting & Embankment, Bridge Work and P.Way Works - 2019
CONTENTS
S.No. Name of Chapter Chapter No.
1. Earth Work 1.
2. Bridge Works Substructure 2.
3. Bridge Works Super structure 3.
4. Bridge Works Super structure- Steel 4.
5. Bridge Works- Misc. 5.
6. Rails, Sleepers, Fittings and Renewals 6.
7. Turnouts and Renewals 7.
8. Manual/Mechanised Screening and Ballast 8.

Related Activities
9. Welding Activities 9.
10. Reconditioning of Points & Crossings 10.
11. Formation & Rehabilitation 11.
12. Activities at Construction Sites 12.
13. Maintenance Activities 13.
14. Testing of Rails & Other Components 14.
15. Heavy Track Machines 15.
16. Small Track Machines 16.
17. Handling of Materials 17.
18. Level Crossings 18.
19. Bridge Related Activities 19.
20. Supply Items 20.
21. Miscellaneous Items 21.

IR's Unified Standard Schedule of Rates 2019 Chapter-1 : Earthwork
CHAPTER - 1 : EARTH WORK

Item No. Description Of Item Unit Rate (Rs.)
EARTHWORK WITH DEFINED LEAD
011010 Earth work in excavation as per approved drawings and dumping at
embankment site or spoil heap, within railway land, including 50m lead
and 1.5m lift, the lead to be measured from the centre of gravity of
excavation to centre of gravity of spoil heap; the lift to be measured
from natural ground level and paid for in layers of 1.5m each including
incidental work, as per specifications
011011 All kinds of soils Cum 236.48
011012 Ordinary Rock (not requiring blasting) Cum 380.04
011013 Hard Rock (requiring blasting) Cum 620.12
011014 Hard Rock (blasting prohibited) Cum 1070.97
011020 Extra over 011010 when controlled blasting is required and is carried Cum 242.37
out with approval of Engineer
011030 Extra over item 011010 for spreading and finishing of fill material on Cum 266.76
embankment by manual means in accordance with specifications
011040 Extra for manual compaction of earthwork, where permitted, with Cum 23.52
rammers
011050 Extra for lead of earth work above initial lead of 50m in all kind of soils
and rocks :
011051 For every 50 m or part thereof - lead over 50m and upto 150m Cum 31.83
011052 For every 50m or part thereof - lead over 150m and upto 500m Cum 25.58
011060 Extra for Crossing of railway track (each track). Each Track 10% per
Note : This item is payable only where crossing of operational lines is Track
involved.
011070 Extra for every additional lift of 1.5m or part thereof after the initial Cum 21.98
1.5m for earth work in all soils
Earthwork in New Lines, Doubling Projects Etc.
012010 Earthwork in cutting (classified) in formation, trolley refuges, side
drains, level crossing approaches, platforms, catch water drains,
diversion of nallah & finishing to required dimension and slopes to
obtain a neat appearance to standard profile inclusive of all labour,
machine & materials and removing & leading all cut spoils either to
make spoil dumps beyond 10m from cutting edge or for filling in
embankment with leads within 2 km on either side of cutting edge,
lifts, ascent, descent, loading, unloading, all taxes / royalty,
clearanceof site and all incidental charges, bailing & pumping out
water, if required, etc. complete as per directions of the Engineer-in-
Charge. The work is to be executed as per latest / updated edition of
"Guidelines for Earthwork in Railway Projects" issued by RDSO,
Lucknow. Cut trees shall be property of Railways and to be deposited
in the railway godown unless specified otherwise in the Special
Conditions of Contract.
{Note - (i) All usable earth arising from cut spoils shall be led into bank
formation and Unusable spoils shall be dumped / stacked (ii) All hard
rock /and boulders not fit for filling will be stacked by the contractor
and will be property of the Railways.}
012011 In all conditions and classifications of soil except rock Cum 131.51
012012 Soft rock not requiring blasting in all conditions Cum 295.32
012013 In hard rock requiring blasting with explosives and blasting/drilling Cum 470.52
equipment Including all incidental work in all conditions. Rate includes
cost of all explosive material.
012014 In rock and very hard rock with hammer / chisel / pavement breaker Cum 986.11
etc. where blasting is not permitted due to special circumstances and
if specifically ordered in writing including drilling and all incidental work
in all conditions
Chapter-1 Page 1 of 7

012015 In any other type of soil not covered above where classification is not Cum 131.51
possible
012020 Earthwork in filling in embankment, guide bunds, around buried type Cum 191.02
abutments, bridge gaps, trolley refuges, rain bunds, if provided,
platforms etc. with earth excavated from outside railway boundary
entirely arranged by the contractor at his own cost as per RDSO's
latest guidelines and specifications and special condition of contract
including all leads, royalty, lifts, ascents, descents, crossing of nallahs
or any other obstructions. The rates shall include all dressing of bank
to final profile, demarcation and setting out of profile, site clearance,
removing of shrubs, roots of vegetations growth, heavy grass,
benching of existing slope of old bank, all handling/re-handling, taxes,
octroi and royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless specified
otherwise in the Special Conditions of Contract.Types of good quality
soil, as acceptable to Engineer-in-Charge.
012030 Extra for mechanical compaction of earth/blanketing material filled in Cum 47.04
embankment with contractor’s rollers of suitable capacity, type and
size to achieve specified density as per specification, testing as per IS
codes including cost of water, T&P, consumable and all labour as a
complete job. The work is to be executed as per Latest edition of
"Guidelines for Earthwork in Railway Projects" issued by RDSO,
Lucknow.
012040 Laying and spreading blanketing materials (Natural or Mechanically Cum 165.03
prepared as per GE-1 or G.E.IRS-2) over new / old embankment /
cutting in layers of 30cm in loose state to make the embankment of
designed profile as per specifications. The rate is inclusive of initial
site clearance, cutting of shrubs, removal of roots of vegetation growth
& heavy grass, surfacing & leveling to give required slope, benching, if
required on existing bank slope, dressing and finishing of bank, all
lead & lift, ascent, descent, crossing of nallahs / other obstructions,
spreading the material and final dressing of slopes and top surface as
per specified camber using contractor’s own machinery, equipment,
T&P, labour etc. as a complete job.
Note - The rate does not include supply / compaction of blanketing
material at site which shall be paid separately.
012050 Finishing blanketing material, already compacted, in accordance with 100Sqm 1176.00
specification - over embankment including sides/cutting
012060 Manufacturing and supplying approved quality blanketing materials Cum 1572.93
(moorum, stone dust, coarse sand granular material etc.) as per
RDSO specifications, properly stacked at site for measurment
MISCELLANEOUS :
013010 Dressing surface (average excavation or filling upto 15 cm) including 10 sqm 161.91
removing vegetation in all kind of soil. Payment against this item is to
be made only if it is not included in earth work item.
013020 Daghbel or lock spit 15cm deep & minimum width at top 20cm. 100 m 265.98
Payment against this item is to be made only if it is not included in
earth work item.
013030 Felling trees of girth (measured at a height of 1m above ground level)
including lead and stacking of material within 100m. Note : 1. When
stumps are grubbed up in addition, the rates shall be doubled for trees
cut and grubbed 2. Payment for grubbing shall only be made where
specially ordered. 3. Grubbing shall be ordered only where it is
essential to remove the stumps, including the roots, as per
specification. 4. Grubbing shall include removal of roots of trees and
saplings to a depth of 60cm below ground level or 30 cm below
formation level or 15 cm below sub grade level, whichever is lower.

013031 Girth over 30 cm and upto 60 cm Each 265.98
013032 Girth over 60 cm and upto 1.5m Each 734.30
013033 Girth over 1.5m upto 3 m Each 1462.79
013034 Girth over 3 m Each 2451.46
013040 Benching slopes, cuts 30 cm in height and approximately 60 cm wide Sqm 18.27
013050 Turfing / planting, including all lead & lift and watering as required until
properly rooted with. Note - Initially payment of only 40% will be made.
Balance 60% will be paid only after 3 months of maintenance period, if
the turfing is properly rooted.
013051 Turfing with sods, 10cm thick and 20cm square closely laid 100 Sqm 5097.82
013052 Turfing with planted doob grass 100 Sqm 4971.22
013053 Planting Sarkanda / sarpat or any other suitable species approved by 100 Sqm 5763.36
the engineer
013060 Providing and laying Jute Geo-Textile (JGT) in slopes of Railway
embankment in accordance with RDSO's guidelines for application of
Jute Geotextile in Railway embankments and hill slopes no.
RDSO/2007/GE:G-0008 or its subsequent versions, including
incidental earthwork and fixing arrangements
013061 With GJ - Type 1 Sqm 65.98
013062 With GJ - Type 2 Sqm 73.13
013063 With GJ - Type 3 Sqm 87.08
013070 Cleaning out silt from bed of reservoir/canals including 50m lead and Cum 157.27
lift upto 1.5m
013080 Cleaning side drains in cuttings by the side of track (Kutcha or Pucca)
including disposal of the debris, soil, muck etc. as directed by the
engineer. Note - Rates are for disposal at the end of cutting. Disposal
of debris/soil/muck beyond end of cutting to be paid for under relevant
lead item.
013081 Lead within cutting is up to 50m Cum 265.98
013082 Lead within cutting is over 50m and up to 200m - for every 50m or part Cum 73.45
thereof
013083 Lead within cutting exceeds 200m - for every 100m or part thereof Cum 73.45
013090 Earth work in filling in embankment from Railway land for repairing of Cum 167.67
cess/formation/level crossing, rain cuts etc. to make the surface to the
desired level and slope to the entire satisfaction of Engineer-in-
charge. The rate will include free lead upto 200m, all lifts, descends,
ascends, crossing of track/road/nallah etc. including breaking of clods
etc and compaction by rollers/rammers/temping rods etc.
Note - This item is only to be paid when specially ordered in writing.
013100 Extra rate for quantities of works executed.
Note - The extra percentage rate is applicable in respect of each item,
but limited to quantities of work executed in these difficult conditions.
013101 In or under water and/or liquid mud, including pumping out water as Cum 20%
required.
Note - In or under water means locations/levels where there is
continuous ingress of water.
013102 In or under foul position, including pumping out water as required. Cum 25%
Note - Foul position means filthy and unhygienic conditions where
physical movements are hampered such as soil mixed with sewage or
night-soil.

013110 Providing and removing barricading with the help of portable fencing
along running track where work is to be done in close vicinity of track.
Fencing shall consist of self supporting steel angles of size 50mm x
50mm x 6mm, 1.5m long provided with hooks etc. and embedded in
CC 1:2:4 block of size 0.23m x 0.23m x 0.23m placed at c/c distance
of 2m along track. 12mm dia rods in three horizontal layers shall be
tack welded with angle posts.
{Note : Released material will be property of the contractor after
completion of work. Cost of cement to be paid separately}
013111 With provision of one 50mm wide retro-reflective tape in horizontal Metre 196.45
direction, duly secured/tight with vertical posts
013112 With provision of painting verticals & horizontals with red luminious Metre 102.91
paints / strips of 30cm each with a gap of 30 cm
013120 Supplying and laying of Biaxial Geo-grid, made from virgin high Sqm 317.72
density polypropylene, having aperture size of 65mmx 65mm, weight
of 320 gms/sqm and ultimate tensile strength of 30 kN/m with
minimum junction efficiency of 95% & minimum radial stiffness of 350
kN/m (@0.5% strain) and laying below ballast over formation,
including transportation, contractor's labour, lead and lift complete as
per directions of Engineer-in-charge
013130 Supplying and laying of Woven Geotextile made from polypropylene Sqm 137.29
multifilament yarn, having minimum mass of 240 GSM & ultimate
tensile strength of 40 kN/m with puncture resistance of 600 N and
apparent opening size of 150 microns and laying at interface of sub-
grade and blanketing layer, including transportation, contractor's
labour, lead and lift complete as per directions of Engineer-in-charge
013140 Supplying, driving and erecting in all types of soils hard wood pile 5m Metre 374.71
to 7m long without joint, 125mm average dia. for protection of bank
slope including two coats of coal tar paint complete, as directed
{Note - Payment will be made as per actual driven length of pile}
013150 Driving rails 90R/52 Kg section below average ground level within the Metre 392.55
slope/toe of embankment including chiseling at the end with
contractor’s own arrangment complete in all respect
{Note - Payment will be made as per actual driven length of rail which
will be supplied free by Railways}
013160 Driving 'Z' section MS sheet piles side by side in all kinds of soil Sqm 3264.98
mechanically or manually as per approved drawing with contractor’s
own arrangment complete in all respect, as directed by engineer in-
charge
{Note - Payment will be made as per actual driven length of pile}
013170 Supplying and fixing bitumen drum sheet by nalling to wooden piles Sqm 655.09
125 mm dia., supplied and driven by contractor complete with
nails/hooks to prevent earth against slippage, as per approved
drawing & as directed
013180 Supplying & providing pre-fabricated vertical drain - Techdrain TD Metre 183.84
3520U or similar, with polypropylene core and wrapped with non-
woven Geotextile with minimum 100mm width & 4mm composite
material thickness and inserting with the help of mechanical / hydraulic
rigs, in the very soft clay for draining out sub-soil water and quick
consolidation of site, excluding the cost of instrumentation, if required

013190 Supplying & laying woven polypropylene Geotextile, indigenousely Sqm 158.05
manufactured from black UV stabilized polypropylene flat tape and
fibrillated tape yarn with minimum 5.3 meter width, laid below ballast
over formation for seperation cum reinforcement application or for hill
slopes for erosion prevention, including transportation, contractors
labour, lead & lift complete as per directions of Engineer in-charge.
013200 Supplying, laying and fixing reinforced Non-woven composite of 60 Sqm 340.37
kN/m x 60 kN/m tensile strength with minimum width of 5 metre,
indigenously manufactured from needle punched Polypropylene Non-
Woven Geotextile, reinforced with high tenacity polyester yarn on the
prepared formation for seperator cum filteration cum reinforcement
application for rehablitation of existing track and construction of new
track, to have clogfree blanket designed layer for extended life. The
job includes transportation , labour, tools & plants, lead/lift etc., as
directed by Engineer in-charge
013210 Supplying, laying and fixing knitted and PVC coated polyester Biaxial Sqm 236.32
Geogrid having weight of 350 gm/sqm with tensile strength of 30 kN/m
x 30 kN/m for Base reinforcement with a minimum width of 5metres,
indigenously produced for Rail Track Bed stabilisation, below the
ballast layer for higher frictional / shear resistance by interlocking
behaviour
013220 Supplying, laying & fixing needle punched & mechanically bonded Non-
woven Geotextile of minimum 5 metre width, made from high quality
Polypropylene / Polyester Fibres, having apparant opening size of 70
microns and laying for seperator cum filteration cum drainage
application at interface of prepared sub-grade & blanketing layer
including transportation, labour, lead & lift complete as directed by
Engineer in-charge for -
013221 Geo-textile having minimum mass of 300 GSM, ultimate tensile Sqm 248.06
strength of 25 kN/m and puncture resistance of 4 kN
013222 Geo-textile having minimum mass of 200 GSM, ultimate tensile Sqm 191.96
strength of 20 kN/m and puncture resistance of 2 kN
013230 Supplying, laying & fixing needle punched & mechanically bonded Non- Sqm 430.73
woven Geotextile of minimum 5 metre width, made from high quality
Polypropylene / Polyester Fibres, having apparant opening size of 80
microns, minimum mass of 600 GSM, ultimate tensile strength of 40
kN/m and puncture resistance of 6.5 kN and laying for seperator
below ballast and above blanketing layer including transportation,
labour, lead & lift complete as directed by Engineer in-charge
Tunnelling Items :
014010 Providing, fabricating and fixing in position Permanent Structural Steel MT 83324.85
Supports, as directed including cost of all materials, machinery,
labour, cutting, bending, welding, grinding, lighting, ventilation,
drainage and all other ancillary operations etc. complete with initial
lead upto 1km and all lifts
014020 Providing, fabricating and fixing in position Temporary Structural Steel MT 85406.26
Supports, as directed and dismantling the same before concreting
including cost of all materials, machinery, labour, cutting, bending,
welding, grinding, lighting, ventilation, drainage and all other ancillary
operations etc. complete with initial lead upto 1km and all lifts alogwith
depositing released materials in designated store or as directed by
Engineer in-charge

014030 Providing and fixing 25mm dia. Steel Rock Bolts with mechanical / Metre 607.93
wedge type Anchorage including drilling 35mm dia. holes, providing
15cm long & 20mm thick steel tappered wedge, 10mm thick plate
washers & nuts, tighetening bolt by torque wrench with all materials,
machinery, labour, ventilation, lighting, drainage & all other ancillary
operations etc. complete with initial lead upto 1km & all lifts
014040 Providing and fixing 25mm dia. Steel Rock Bolts with Resin Bond Metre 700.85
Cement Capsules Anchorage including drilling 35mm dia. holes,
inserting grout capsule, drving bolt, fixing of 10mm thick plate washers
& nuts, tighetening the same by torque wrench after hardening of
cement grout with cost of all materials, machinery, labour, ventilation,
lighting, drainage and all other ancillary operations etc. complete with
initial lead upto 1km & all lifts
014050 Providing and fixing Hard Variety Jungle Wood for lagging / blocking Cum 51347.59
locations in tunnel, wherever required including cost of all materials,
machinery, labour, fixing in position, lighting, ventilation, drainage etc.
complete with all leads & lifts
014060 Providing and constructing UCRS Masonry with approved stones from Cum 1808.57
tunnel excavated muck in 1:6 cement mortar for back-filling over
cuts/slips on tunnel sides due to geological faults etc. including cost of
all materials, machinery, labour, cleaning, scaffolding, packing mortar,
wedging stone chips, curing, lighting, ventilation, drainage etc.
complete with all leads upto 1km & all lifts, excluding cost of cement.
{ Cement Qty. (in qtl.)- 0.83}
014070 Excavation for ADIT by Tunnelling methods in all types of Rock Cum 2196.16
including cost of all other materials, machinery, labour, scalling
excavated surface, ventilation, lighting, drainage, removing & hauling
excavated muck outside ADIT upto specified dump area and all other
ancillary operations etc. complete with initial lead upto 1km and all lifts
014080 Excavation for vertical / inclined shaft in all types of soft/hard Rock Cum 2760.77
including cost of all other materials, machinery, labour, scalling
excavated surface, ventilation, lighting, drainage, removing & hauling
excavated muck outside shaft upto specified dump area and all other
ancillary operations etc. complete with initial lead upto 1km and all lifts
014090 Excavation for Tunnel by tunnelling methods in Rock not requiring Cum 2327.18
supports including cost of all other materials, machinery, labour,
scalling excavated surface, removing undercuts, ventilation, lighting,
drainage, removing & hauling excavated muck outside tunnel upto
specified dump area and all other ancillary operations etc. complete
with initial lead upto 1km and all lifts
014100 Excavation for Tunnel by tunnelling methods including excavation for Cum 2506.98
supports in all types of soils / rock strata requiring supports (excluding
cost of providing supports) including cost of all other materials,
machinery, labour, scalling excavated surface, ventilation, lighting,
drainage, removing & hauling excavated muck outside tunnel upto
specified dump area and all other ancillary operations etc. complete
with initial lead upto 1km and all lifts
014110 Excavation for Tunnel by Heading and Benching tunnelling methods Cum 2658.44
including excavation for supports in all types of soils / rock strata
requiring supports (excluding cost of providing supports), including
cost of all other materials, machinery, labour, scalling excavated
surface, ventilation, lighting, drainage, removing & hauling excavated
muck outside tunnel upto specified dump area and all other ancillary
operations etc. complete with initial lead upto 1km and all lifts

014120 Extra to USSOR Item nos. 014070 to 014110, if muck is to be carried Cum 156.57
out through shaft, using winch and mucking tub system
014130 Removing and hauling muck, fallen due to natural causes, such as Cum 1411.92
Geological faults etc., out of Tunnel including breaking large
fragments by blasting, if necessary and disposing off the same in
specified dump area or as directed including cost of all other
materials, machinery, labour, ventilation, lighting, drainage and all
other ancillary operations etc. complete with initial lead upto 1km and
all lifts
014140 Dewatering tunnel by pumping out water, collected by natural drainage KwHr. 79.52
inside tunnel including providing sump, wherever necessary including
cost of all other materials, machinery, labour, ventilation, lighting,
drainage and all other ancillary operations etc. complete
014150 Providing and laying in-situ vibrated M-10 grade Cement Concrete Cum 2119.97
using 40mm down size approved, clean, hard, graded aggregates
crushed from tunnel excavated muck for filling and levelling over-cuts
in bed due to geological faults etc. including cost of all materials,
machinery, labour, cleaning bed, batching, mixing, conveying and
laying, levelling, compacting, finishing, curing, lighting, ventilation,
drainage etc. complete with initial lead upto 1km and all lifts.
{ Cement Qty. (in qtl.)- 1.75}
014160 Providing and laying in-situ vibrated M-20 grade CC using 40mm Cum 2484.56
down size approved, clean, hard, graded aggregates crushed from
tunnel excavated muck for kerb and bed lining, including cost of all
materials, machinery, labour, formwork, batching, mixing, conveying
upto placing point in agitator cars, placing in position, levelling,
vibrating, finishing, curing, lighting, ventilation, drainage etc. complete
with initial lead upto 1km and all lifts { Cement Qty. (in qtl.)- 1.75}
014170 Drilling 32mm dia. Grout Holes in concrete / rock by percussion Metre 142.31
drilling, using jack hammer or stopper drills, as directed to specified
depth for consolidation / contact grouting including cost of all
materials, machinery, labour, cleaning holes, ventilation, lighting,
drainage and all other ancillary operations etc. complete
014180 Drilling 75mm dia. vertical or inclined Holes in Rock / Concrete in Metre 278.82
tunnel by percussion drilling, using waggon drill or other suitable
drilling equipments, including cost of all materials, machinery, labour,
ventilation, lighting, drainage etc. complete
IR's Unified Standard Schedule Of Rates - P.Way : 2019 Chapter-2 : Bridge Related Activities
CHAPTER - 2 : Bridge Works Substructure

Description of Item Cement
Item No. Unit Rate (Rs.)
Qty. (qtl)
021010 Exploratory drilling of boreholes down to
required depth, drilling of 150mm dia.
boreholes in all type of soils except hard rock
& large boulders (boulder core more than
30cm) including refilling, reinstating surface
and disposing off surplus material including
use of mechanical rigs with power operated
winches as well as percussion/chieselling tool
for advancing through occasional seams of
hard strata to be employed, where necessary
in Dry area
021011 0m to 10m Meter 1335.73
021012 10m to 20m Meter 1393.80
021013 20m to 30m Meter 1858.40
021014 30m to 40m Metre 1974.55
021015 40m to 50m Metre 2032.63
021016 50m to 60m Metre 2090.70
021017 60 m to 70 m Metre 2206.85
021020 Exploratory drilling of Boreholes down to
required depth, drilling of 150mm diameter
boreholes in all type of soils except hard rock
and large boulders (boulder core more than
30cm), including refilling, reinstating surface
and disposing off surplus material including
use of mechanical rigs with power operated
winches as well as percussion / chieselling
tool for advancing through occasional seams
of hard strata to be employed where
necessary in River bed area including
standing/flowing water upto 2m depth with all
necessary arrangements
021021 0m to 10m Metre 3740.03
021022 10m to 20m Metre 3873.60
021023 20m to 30m Metre 4007.18
021024 30m to 40m Metre 4140.75
021025 40m to 50m Metre 4274.32
021026 50m to 60m Metre 4407.89
021027 60m to 70m Metre 4675.04
021030 Extra for 150mm dia. bore in hard Rock/large Metre 5226.75
Boulder at all levels
021040 Drilling of NX size borehole (75mm dia.) in all
types of hard rock (fresh rock) and collection
of rock core samples from boreholes and
preserving in boxes
021041 0m to 10m Metre 4274.32
021042 10m to 20m Metre 4341.11
021043 20m to 30m Metre 4675.04
021044 30m to 40m Metre 5342.90
021045 40m to 50m Metre 5610.05
021046 50m to 60m Metre 5743.62
Chapter-2 1 of 14

Qty. (qtl)
021047 60m to 70m Metre 5877.19
021050 Conducting in-situ full size Plate Load Test
(PLT) at selected location as per IS:1888
including making loading arrangements &
casting of RCC/cast in-situ concrete footing as
per codal provisions including excavation and
refilling of trial pit
021051 a. Plate size 30cm x 30cm Each 20907.00
021052 b. Plate size 45cm x 45cm Each 26714.50
021053 c. Plate size 60cm x 60cm Each 39491.00
021060 Conducting in situ Vane shear test for soil as Each 2555.30
per IS:4434
021070 Conducting SCPT for soil as per IS:4968 Each 40652.50
021080 Conducting DCPT for soil as per IS:4968 Each 33683.50
021090 Conducting determination of California Each 5226.75
Bearing Ratio as per IS:2720
021100 Taking out 100mm dia. & 450mm long Each 119.63
undisturbed samples of soil from bore holes,
including provision of air tight containers for
packing and, labelling incl. transporting the
samples to laboratory. Piston sampler shall be
used for extracting undisturbed samples
where necessary. Samples shall be collected
as per IS:2720.
021110 Taking out 100mm dia. & 450mm long Each 127.77
disturbed samples of soil from bore holes,
including provision of air tight containers for
packing, labelling and transporting the
samples to laboratory. Samples shall be
collected as per IS:2720.
021120 Conducting standard penetration test as per Each 199.78
IS:2131 at approximate1.5m intervals in bore
holes, as directed by the Engineer in charge
021130 Collection of water samples at required Each 197.46
intervals
021140 Conducting laboratory Tests on collected soil
samples as per relevant IS code
021141 Moisture Contents/Dry Density Each 813.05
021142 Atterberg Limit Each 813.05
021143 Specific Gravity Each 464.60
021144 Grain size analysis including Hydrometer Each 1045.35
analysis
021145 Direct Shear Test Each 2090.70
021146 Natural Density Each 522.68
021147 Consolidation Test Each 2090.70
021148 Unconfined Compression Test Each 2090.70
021149 Tri-axial Test Each 2090.70
021150 Conducting Laboratory tests on collected
ROCK SAMPLES as per relevant IS code
021151 Density Test Each 522.68
021152 Water Absorption & Porosity Each 929.20
021153 Hardness Each 522.68
Chapter-2 2 of 14

Qty. (qtl)
021154 Unconfined Compression Test Each 2090.70
021155 Point Load Test Each 929.20
021156 Modulus of Elasticity Each 4646.00
021157 Abrasion Testing Each 1742.25
021160 Conducting in-situ Portable Impulse Plate Each 768.36
Load Test with 'Light Drop Weight Tester',
having plate size of 300mm & weight of 10 Kg
at identified locations as per ASTM E2835-11,
for measurement of compaction quality of soil
{modulus of deformation (Evd) for correlation
to Dpr%} and for evaluation of load carrying
capacity in stages of formation construction
021170 Conducting chemical analysis of ground Each 2787.60
water samples to determine suitability for
concreting and aggressiveness in relation to
attack on concrete / reinforcement including
determination of pH value
021180 Conducting chemical analysis of soil samples Each 3368.35
to determine aggressiveness in relation to
attack on concrete / reinforcement including
determination of pH value
021190 Preparation and submission of Final report Each 67367.00
giving complete and comprehensive record of
investigations, laboratory test reports and
calculations in approved format
OPEN FOUNDATION
022010 Earthwork in excavation for foundations and
floors of the bridges, retaining walls etc.
including setting out, dressing of sides,
ramming of bottom, getting out the excavated
material, back filling in layers with approved
material and consolidation of the layers by
ramming and watering etc. including all lift,
disposal of surplus soil upto a lead of 300m,
all types of shoring and strutting with all labour
and material complete as per drawing and
technical specification as directed by Engineer
in charge
022011 All kinds of soils Cum 264.71
022012 Ordinary rock Cum 437.33
022013 Hard rock (requiring blasting) Cum 695.56
022014 Hard rock (blasting prohibited ) Cum 960.70
022020 Extra for the quantity of works, executed in or Cum 20% of
underwater and/or liquid mud including basic item
pumping out water as required
Chapter-2 3 of 14

Qty. (qtl)
022030 Providing and laying Plain Cement Concrete Cum 3303.00 2.2
1:3:6 with graded stone aggregate of 40mm
nominal size, in foundation and floors,
retaining walls of bridges including
mechanical mixing, vibrating, pumping and
bailing out water where ever required with all
materials and labour complete but excluding
the cost of cement and shuttering as per
drawings and technical specifications as
directed by Engineer
022040 Providing and laying in position machine Cum 3944.07 4.22 or as
mixed, machine vibrated and machine per appd.
batched Design Mix Cement Concrete M35 Design mix.
grade (Cast in-Situ) using 20mm graded
crushed stone aggregate and coarse sand of
approved quality in RCC raft foundation & Pile
cap including finishing, using Admixtures in
approved proportions (as per IS:9103), to
modify workability & other properties without
impairing strength and durability complete as
per specifications and direction of the
Engineer in charge. Payment for cement,
reinforcement, admixtures and shuttering
shall be paid extra.
grade (Cast - in Situ) using 20 mm graded
approved quality in Abutment, pier, wing walls
and return walls of Mass cement concrete
above RCC raft Including finishing, using
Admixtures in approved proportions (as per
IS:9103), to modify workability & other
properties without impairing strength and
durability complete as per specifications and
direction of the Engineer in charge. Payment
for cement, reinforcement, admixtures and
shuttering shall be paid extra.
Chapter-2 4 of 14

Qty. (qtl)
022060 Providing and laying in position machine
mixed, machine vibrated and machine
batched Design Mix Cement Concrete M35
approved quality for the following Reinforced
cement concrete structural elements up to
height of 5m from foundation top level,
including finishing, using Admixtures in
per specifications and direction of the
Engineer in charge. Payment for cement,
reinforcement, admixtures & shuttering shall
be paid extra.
022061 Abutment & Pier Cum 4338.47 4.22 or as
022062 Wing wall and Return wall Cum 4338.47 per appd.
022063 Abutment cap, Pier Cap, Inspection Platform Cum 4535.68 Design mix.
& Pedestal over Pier cap, Fender wall,
Diaphragm wall etc.
022064 Approach slab at formation level, Dirt wall/ Cum 4535.68
ballast wall at formation level
022065 Extra for every increase of 1m or part thereof Cum/ m 79.27
in the height above 5m height
022070 Providing, driving and installing Bored cast in-
situ Reinforced Cement Concrete piles of
specified diameter and length below pile cap
in M-35 grade Design Mix Cement Concrete,
using 20mm graded crushed stone aggregate
and coarse sand of approved quality, to carry
a safe working load not less than specified,
excluding the cost of casing pipe and length of
pile to be embedded in pile cap etc. complete,
concreting by machine batching, machine
mixing, scaffolding, using Admixture in
approved proportion (as per IS:9103), placing
with tremie pipe, chipping off of pile top to
remove laitance concrete above cut off level
etc., pumping and bailing out water with all
labour material complete including crossing of
tracks if required, as per approved drawing,
specification and direction of the Engineer in
charge. Length of the pile for payment shall
be measured upto the bottom of pile cap
excluding the mud mat. Payment for cement,
Admixture, casing pipe & reinforcement shall
be paid extra.
022071 1500 mm diameter Metre 18336.04 7.561 or as
per appd.
Design mix.
Chapter-2 5 of 14

Qty. (qtl)
022072 1200mm diameter Metre 12102.42 4.836 or as
per appd.
Design mix.
per appd.
Design mix.
per appd.
Design mix.
per appd.
Design mix.
022080 Providing, fabricating and installing casing MT 93319.70
pipe for bored piles for all diameters with
specified thickness of steel plate including all
labour, materials, pumping and bailing out
water wherever required, complete as per
technical specifications as directed by
Engineer in charge. This will include the
weight of plate only and no cognizance will be
given for the fittings, i.e. rivets and welding
etc.
022090 Extra for chieselling in addition to boring of
piles, if chieselling is resorted to in hard rock
or big stone boulders larger than 30cm depth
by any means, i.e. by chiesel or manual
chiesel and hammer method
022091 1200mm diameter pile Metre 3650.13
022100 Conducting load testing of a single pile upto
following capacity in accordance with IS:2911
(Part-IV) including installation of loading
platform and preparation of pile head or
construction of test cap and dismantling of
test cap after test etc. with all labour, material,
tool & plants, equipment, machinery, etc.
complete as per drawing and specification, as
directed by the Engineer
022101 Initial load test upto 50 ton capacity pile Each 70386.90
022102 Initial load test above 50 ton capacity upto Each 140367.28
100 ton capacity pile
022103 Initial load test above 100 ton capacity upto Each 180380.95
250 ton capacity pile
022104 Extra for every increase of 50 T in pile Each 14785.90
capacity or part thereof over 250 T
022105 Routine Load Test upto 50 ton capacity pile Each 58481.53
022106 Routine Load Test above 50 ton capacity Each 116788.83
upto 100 ton capacity pile
022107 Routine Load Test above 100 ton capacity Each 156779.27
upto 250 ton capacity pile
Chapter-2 6 of 14

Qty. (qtl)
022110 Lateral load testing of single pile in
accordance with "IS Code of practice IS:2911
(Part-IV) for determining safe allowable lateral
load of pile” with all labour, material, tool &
plants, equipment, machinery, etc complete
as per drawing and specification as directed
by the Engineer
022111 Piles with lateral load capacity of upto 10 ton Each 35251.53
022112 Piles with lateral load capacity of above 10 ton Each 47087.21
& upto 20 ton
022113 Piles with lateral load capacity of above 20 ton Each 69651.91
022120 Pulse Echo Test (PET) for integrity testing of Each 2636.61
piles with contractor’s men, materials and
machines. The rate includes cost of
Inspection of site, preparation of pile head and
any other unforeseen cost required for the
test, submission of reports in triplicate as per
satisfaction of the Engineer in Charge at site.
022130 Supplying, spreading and compacting well Cum 1156.46
graded hard stone of 63mm average size
(maximum upto 80mm size) in the bottom of
foundation of box culverts, bridges etc.
including all lead, lift, ascent, descent etc.
complete job as per directions of Engineer In-
charge
WELL FOUNDATION
023010 Earth work in OPEN excavation in foundation Cum 422.73
of bridges, for placing of well curbs of all
shapes and designs in all kinds of soil
including taking out the excavated soil,
levelling, ramming of bottom of excavation
and trimming of sides, returning the soil in
layers, consolidation, disposal of surplus soil
within a lead of 300m, including all lift,
dewatering, shoring and strutting complete as
per technical specification and as directed by
Engineer in charge. (compaction of surplus
soil when led to the bank will be paid as per
relevant item separately)
023011 Extra to item for Earthwork in excavation over Cum 279.68
item no. 023010, if the excavation is carried
out in Rock not requiring blasting
023012 Extra for Earthwork in excavation over item Cum 521.99
023010, if excavation is carried out requiring
controlled blasting or chieselling where
required and permitted by the engineer in
charge
Chapter-2 7 of 14

Qty. (qtl)
023020 Providing and constructing Temporary
Earthen Island / coffer dam for construction of
well foundations, including bailing and
pumping out of water, provision of sand bags,
wooden ballies, sheet piling, earth, sand or
any other suitable material, in water depth
upto 1.5m, as required with all labour and
material complete job
023021 For well size (longest dimension) upto 10m Each 42896.98
023022 For well size (longest dimension) above 10m Each 254388.94
023030 Supplying, Fabrication, assembly, erection & MT 102706.71
placing in position the cutting edge of well
curb with structural steel including MS
sheet/Plates of specified thickness for
pier/abutment complete as per approved
plans and as per direction of Engineering In
charge including all operations like cutting,
bending, straightening, drilling holes, bolting,
riveting, welding, threading, jointing of steel
sections including outer and inner places
liners and skin plates, stiffeners, hooks, bottle
nuts, bond rods etc. as per design including
all ascent, descents, leads, lifts, handing, re-
handling, all other obstructions whatsoever,
diverting channels, pumping / bailing out of
water wherever required including cost of
steel such as flats, sheets, angles, steel bars
etc. with all labour and material as a complete
023040 Dry/Wet Sinking of Circular Wells (Other than
pneumatic method) in all types of strata
except hard rock requiring ballasting,
including bailing and pumping out water,
removal of excavated soil with all labour and
material required for sinking as per drawing
and direction of the Engineer in charge,
disposal of surplus soil upto 1 km lead in the
adjoining bank/embankment (compaction to
be paid separately under the relevant item)
023041 From initial level of cutting edge & upto 3m Cum 157.01
depth
023042 From 3m to 10m depth Cum 217.15
023047 From 50 m depth onwards Cum 12522.51
Chapter-2 8 of 14

Qty. (qtl)
023050 Dry/Wet Sinking of Twin D type Wells (Other
than pneumatic method) in all types of strata
except hard rock requiring ballasting,
including bailing and pumping out water,
removal of excavated soil, with all labour and
material required for sinking as per drawing
and direction of the Engineer in charge
including disposal of surplus soil in the
adjoining bank or within the zone including
disposal of surplus soil in the adjoining bank
or within the zone including compaction
(compaction to be paid separately under the
relevant item)
023051 From initial level of cutting edge & upto 3m Cum 245.04
depth
023057 From 50m depth onwards Cum 20488.27
023060 Extra for sinking of wells in hard rock requiring Cum 759.22
controlled blasting including cost of explosive,
detonators, chieselling including all other
ancillary works
023070 Providing and laying in position machine

mixed, machine vibrated and machine
batched Design Mix Cement Concrete M35
approved quality in the following elements of
well including finishing, using Admixtures in
per drawings and technical specifications as
directed by Engineer. Payment for cement,
reinforcement, admixtures and shuttering
shall be paid extra
023071 In well Kerb Cum 3880.16 4.22 or as
per appd.
Design mix.
023072 In Steining of wells Cum 3880.16 4.22 or as
per appd.
Design mix.
023073 In Bottom plug for wells including Cum 4699.86 4.22 or as
arrangements for placing concrete under per appd.
water with tremie or bottom opening skips Design mix.
023074 In Intermediate/top plug without shuttering Cum 5404.84 4.22 or as
per appd.
Design mix.
Chapter-2 9 of 14

Qty. (qtl)
023075 In Intermediate/Top plug with internal Cum 5404.84 4.22 or as
shuttering per appd.
Design mix.
023076 In Well cap and corbel, if provided Cum 5404.84 4.22 or as
per appd.
Design mix.
023080 Supplying and filling ordinary sand/excavated Cum 1695.16
river bed material, if approved in between
bottom plug and top plug in wells including all
lead lift handling, re-handling, as a complete
job. Sand should be simultaneously filled with
water for three days to achieve full
compaction so that further chances of
shrinkage due to voids are eliminated.
023090 Erection of disposable working platform to drill Cum 3585.42
bore hole through flowing/standing water
through river bed upto water depth of 1.5m, if
necessary and dismantling after completing
work and removing from the site to clear the
water way. (The serviceable material, if any
will be the property of Railway and shall be
depositted in the designated stores as
directed by the engineer in-charge)
RCC BOX
grade (Cast in-Situ/Pre-cast) in bottom/top
slab, side walls, toe wall and sumps haunch
filling head walls or any other component
using 20mm graded crushed stone aggregate
and coarse sand of approved quality of cast in-
situ RCC box of size upto 5m (bigger inside
dimension) including finishing, Admixtures in
impairing strength and durability, complete as
per drawings and technical specifications as
directed by Engineer in charge. Payment for
cement, reinforcement, admixtures and
shuttering shall be paid extra.
Chapter-2 10 of 14

Qty. (qtl)
batched Design Mix Mass Cement Concrete Design mix.
M-20 grade (cast in-situ) using 20mm graded
approved quality in Drop and curtain wall and
alike structures below bed level, including the
cost of centring, shuttering and finishing
complete as per drawings and technical
specifications as directed by Engineer.
Payment for cement & reinforcement shall be
paid extra.
{Note: The shuttering, scaffolding, centring,
reinforcement, placing of reinforcement and
cost of cement to be paid extra under relevant
items}
024030 Excavation in formation / foundation for
insertion of precast RCC box, having linear
waterway upto 3m for single line, including
dismantling of existing bridge, built with stone
masonry / cement concrete in foundation &
superstructure, rock/stone below or above
bed level, removing existing ballast and filling
with Railway's Moorum / Earth / Sand over top
and beside the box after launching of precast
Box on new alignment during block period
and / or under traffic conditions and
underneath the R.H. Girder, if required with
contractor's three Excavators of 200 HP
capacity or above (2 working + 1
spare);Hammer Drill - 1 No.; Tippers - 2 Nos.
and Tractors - 2 Nos. with all contractor's
labour, tools/plants, machinery, consumables
etc. includng all lead, lift, loading, unloading
and stacking of all serviceable materials at
nominated locations, disposing of un-
serviceable materials and clearing debris
away from the vent way for free flow of water
including making approaches for movement of
machinery & materials and as directed by
Engineer in-charge.
Chapter-2 11 of 14

Qty. (qtl)
Conditions : (1) Unit of 'Each Bridge' means
bridge of span(s) with a total linear waterway
upto 3m across one track; (2) The contractor
shall arange minimum necessary
machineries, e.g. 'Excavator' of 200 HP
capacity or above - 3 nos. (2 working + 1
spare), Stone Breaker - 1 no., Tippers - 2
nos., Tractors - 2 nos. and all other required
machineries etc. in good working condition at
site of work; (3) Rate shall include
trasnportation of all machineries at site of
work including oils, other consumables,
tools/plants, driver batta etc. (4) During
excavation at site, if rock / boulders are met
with, contractor shall break / demolish rock /
boulders of any size & quantity and dispose it
at nominated place for proper insertion of box
and Railway will not pay extra cost for this
work; (5) Work shall be carried out under
offered traffic block. If due to any reason,
traffic block is not granted, no extra payment
shall be made. Contractor shall keep his
labour, machinery, equipments etc. at site till
completion of work and as per instruction of
024031 (a) Surcharge upto 1 metre Each Track 143210.63
024032 (b) Extra to Item no. 024031 for additional Each Track 19975.48
surcharge of every one metre or part thereof
024040 Launching of precast RCC Box of any Each Track 359080.63
thickness and height, having linear waterway
upto 3.0 metre for single track, consisting of
precast units of 1.0 to 4.0 metres length in
stages as per approved drawing, depending
upon requirement at site to correct alignment
including shifting of precast RCC Box units
from casting location to bridge site with all
leads before launching, with contractor’s 100
MT capacity road cranes (2 working + 1
spare) and one road trailer of 20 MT carrying
capacity including dismantling, laying and
packing of track after launching of Box and till
allowing the first train to move at non-stop 20
kmph speed. Work shall be carried out with all
contractor's men, materials, crane, tools, lead
& lift etc. including bringing these to site of
work, making approach road to bridge &
crossing of tracks wherever necessary,
complete and as directed by Engineer in-
charge
Chapter-2 12 of 14

Qty. (qtl)
{Conditions : (1) Contractor shall keep cranes,
trailer etc. in good working condition and shall
be in readliness before grant of block; (2)
Work shall be carried out under offered traffic
block and if due to any reason, traffic block is
not granted; no extra payment will be made.
Contractor shall keep his labour, machinery,
equipments etc. at the site till completion of
work and as per instructions of Engineer in-
charge; (3) Contractor shall keep RH Girder
ready for insertion in case it is required to be
inserted during traffic block. If RH Girder is
inserted into track, extra payment will be
made separately for trasnportation and
placement of these Girders}
MISCELLANEOUS
025010 Deduct if 40mm graded stone aggregate is Cum -58.08
used in place of 20mm graded stone
aggregate in any grade of concrete.
(deduction to be made for quantity of
concrete)
025020 Providing and applying two coats of coal tar or sqm 142.05
bitumen confirming to IS:3117-1965 on the
top and sides of RCC box/slabs @ 1.70
kg/sqm after cleaning the surface with all
labour and materials complete job as directed
by the Engineer
025030 Centring and shuttering including strutting,
propping etc. and removal of form for :
025031 All types of bridge sub-structures, e.g. pier, sqm 523.29

abutment, wing wall, retaining wall, RCC box
type foundations, Abutment cap, Pier Cap,
Inspection Platform & Pedestal over Pier cap,
Fender wall, Diaphragm wall etc. upto 5m
above ground level
025032 All types of bridge super-structures, e.g. slabs, sqm 680.51

I-girders, T-girders, Box girders etc. upto 5m
above ground level
025033 Extra for additional height over item no. sqm/m 84.44
025031 & 025032 wherever required with
adequate bracing, propping etc. over initial
height of 5 metres for every additional height
of 1 metre or part thereof
Chapter-2 13 of 14

Qty. (qtl)
025040 Providing and laying in position machine sqm 1546.99 4.03 or as
batched Design Mix Cement Concrete M-35 Design mix.
approved quality in jacketing of piers and
abutments from bottom of foundation upto a
height of 10m including finishing for average
30cm thickness of jacketing. Payment for
reinforcement, cement, wire mesh, shuttering,
drilling of holes and insertion of rods will be
made extra.
025041 Drilling 32mm dia. holes for jacketing / metre 127.44

anchoring
025042 Inserting of dowel bars of specified dia. (cost metre 11.20
of rods to be paid extra)
Chapter-2 14 of 14
IR's Unified Standard Schedule of Rates 2019 Chapter-3: Bridge Works- Super Structure:RCC
CHAPTER - 3 : Bridge Works Super Structure- RCC

Cement
Qty. (qtl.)
031010 Providing and laying in position Design Mix Cement

Concrete of all grades machine mixed, machine
vibrated and machine batched using 20mm graded
crushed stone aggregate and coarse sand of approved
quality for cast in-situ Prestressed (Post tensioned)
concrete girder / Box girders for spans upto 18.3m
(centre to centre) including finishing, using Admixtures
in approved proportions (as per IS:9103), to modify
workability & other properties without impairing strength
and durability complete as per specifications and
direction of the Engineer in-charge. Payment for
Shuttering, Cement, Admixtures, reinforcement, HTS
cables, sheathing, anchorage cones, stressing of
cables and grouting of the ducts will be done extra.
031011 With Soffit level upto 9m above Bed level Cum 3944.63 4.30 or as
per appd.
Design mix.
031012 With Soffit level From 9m above Bed Level to12m Cum 5192.16 4.30 or as
above Bed Level per appd.
Design mix.
031013 With Soffit level From 12m above Bed Level to 15m Cum 5504.04 4.30 or as
above Bed Level per appd.
Design mix.
031014 Extra over USSOR Item no. 031013 for Soffit level Cum/m 104.33
beyond 15m above Bed Level for every 1m or part
thereof
031015 Extra for increase in span by every 1m or part thereof m/Cum or 141.76 4.30 or as
for spans above 18.3m part thereof per appd.
Design mix.
031016 Deduct for casting of Slab instead of Girders (for any Cum 567.06
heights)
031020 Providing and laying in position machine mixed, Cum 3944.63 4.30 or as
machine vibrated and machine batched Design Mix per appd.
Cement Concrete M-40 grade using 20mm graded Design mix.
quality for the Precast Prestressed (Post tensioned)
concrete girder/Box (spans upto 30.5m) in contactor’s
casting yard, including finishing, using Admixtures in
approved proportions (as per IS:9103), to modify
and durability, complete as per specifications and
direction of the Engineer. Payment for Shuttering,
Cement, Admixtures, reinforcement, HTS cables,
anchorage cones, stressing of cables and grouting of
the ducts will be done extra. Launching of girder/slab in
position is not included in this item.
031021 Deduct for casting of Slab instead of Girder/Box Cum 567.06
Page 1 of 8
Cement
Qty. (qtl.)
031030 Providing and laying in position machine mixed, Cum 4498.95 4.30 or as
machine vibrated and machine batched Design Mix per appd.
Cement Concrete M-40 grade using 20mm graded Design mix.
quality for the Precast Prestressed (Pre tensioned)
concrete girder (spans upto 9.1m) in contractor’s
casting yard, including finishing, using Admixtures in
approved proportions (as per IS:9103), to modify
and durability, complete as per specifications and
direction of the Engineer. Payment for Shuttering,
Cement, Admixtures, reinforcement, HTS cables,
sheathing, anchorage cones, stressing of cables and
grouting of the ducts will be done extra. Launching of
girder/slab in position is not included in this item
031031 Deduct from 031030 for casting of Slab instead of Cum 567.06
Girder
031032 Supplying and laying in position M-40 grade precast Cum 4149.61
prestressed cement concrete ballast retainers of size,
as directed by Engineer In-charge
031040 Design, manufacturing, supplying and fixing in position Cu Cm 1.61
elastomeric bearing pads under prestressed concrete
girder, for Pre-cast as well as cast-in-situ girders as per
approved drawing. The rate shall include cost of load
test of one no. bearing from Railway approved firms and
all fixing materials, equipments, machineries, labour,
taxes, loading, unloading, leading, lifting etc.complete.
Rates include getting the drawing approved from
Railway and cost of inspection during manufacturing
from railway approved organization. (Note : 1. The rate
is for finished item complete and paid only after fixing in
position below the girder. 2. The volume shall be given
in the drawing and no deduction shall be made for
inserted steel plates etc.)
031050 Providing and fixing in position of standard preformed

sealed and slab type or strip seal elastomeric type
expansion joints for Railway bridge or Road Over
Bridges as per approved drawings and latest
MOST/IRC specifications. The rates are inclusive of
supplying, fixing with contractor’s own materials, e.g.
inserts, bolts, socket tubes, Neoprene sheet/cap etc.,
equipments, machineries, labour, all taxes, royalty, all
lead & lifts, transport, testing, surface preparations,
complete
031051 For 40mm expansion Metre 26009.32
Page 2 of 8
Cement
Qty. (qtl.)
031060 Load testing of one or more spans of bridge as selected
by the Engineer as per approved load test procedure
following relevant IS/IRC/Railway codes with
contractor’s labour, deflection measuring instruments,
loading materials, recoding and analyzing the load
testing results including all lead & lift, etc. complete as
required. The rates are all inclusive and will be paid
after load test is finished and girder is cleared of the
kentledges/loading material etc. The load shall be 1.25
times the stipulated design load, based on design load
& not span
031061 For Span design load upto 100 MT Each 157792.97

031062 Extra for every increase of 100 MT or part thereof in the Each 100 MT 156699.66
span load capacity upto 800 MT
031070 Providing, fabricating & fixing in position to exact design MT 153647.84 As per actual
profiles, prestressing H.T.S. cables of all classification site
made from Low Relaxation strands conforming to consumption
IS:14268–1995 in Prestressed Concrete girders/slabs
etc. including supplying, cutting, making into cables with
necessary spacers, colour coding, protecting with water
soluble oil at all time, anchoring of cables, supplying
and placing spiral corrugated type galvanized metal
steel ducts sheathing made up of Cold Rolled Cold
Annealed (CRCA) mild steel conforming to IS:513 of
required diameter/ thickness, vent pipe, placing,
bending, routing, fixing, stressing & grouting of cable
ducts with cement grout, Anchorage sets in required
number with provision for future prestressing, if any
including all lead and lift with contractor’s own materials,
labour, equipments etc. complete as per drawings &
specifications. Rate also includes covering anchorage
pads with epoxy mortar of approved quality to avoid
corrosion. Cement for grouting to be paid separately.
031071 Deduct for not using CRCA sheathing & other related MT 38289.33
items for pretensioned members from item 031070
031072 Extra for using HDPE sheathing instead of CRCA MT 133.57
sheathing
031080 Making suitable designed staging for casting of PSC Cum 3967.42
girders on over head in cast in-situ method and slewing
them to the exact location to proper level and alignment
complete on to the bed blocks or pedastals with all
contractors materials. Rate includes cost involved for
various arrangements required for staging, slewing,
lifting, lowering with all the contractors materials,
machinary, tools and plants
Page 3 of 8
Cement
Qty. (qtl.)
031090 Launching of PSC girders casted by any method MT 1737.13
approved by Engineer or steel girders and placing them
to correct alignment and level over the bed block /
pedastal. The PSC girder shall be precast at casting
bed developed at site. The cost of the casting bed will
be paid extra. The rate includes cost involved for
various arrangements, suitable capacity cranes, men
and machinary, lifting, lowering etc.
031100 Pushing / Insertion of already cast RCC Box through Per Metre per 18571.71
existing embankment below running rail traffic for all Sqm
heights and depths including normal to embankment or
in skew, by mechanical jack pushing technique as per
approved drawing including all types of enabling works
such as excavation of approaches, cutting of banks
upto required level, disposal of surplus earth outside
railway land, alignment of boxes, as per scheme
approved by railway and as directed by the Site
Engineer. It includes provision of cutting edge, cost of
all types of jacks, all lead, lift, ascends, descends,
loading, unloading, handling, rehandling, crossing of
stream, nallah, Railway track, level crossing etc. or any
other obstruction, cost of all seafty works and safety
precautions as a complete job.
(Note : 1. Payment for construction of thrust bed and
RCC box shall be paid sepreately. 2. After completion of
work, released cutting edge will be the property of
contractor.)
031110 Providing and Laying only CE marked Knitted and PVC

coated Polyester Uniaxial Geogrid, indegeniously
manufactured from selected high tenacity polyester
yarn with high molecular weight (> 25000 g/mol), and
low carboxyl end group (<30m mol/kg) for Reinforced
Earth Wall (extruded PP geogrids & Polyester strips &
Geostrips not allowed) with granular fill of PHi-32
degree (design is to be carried out in accordance with
BS-8006 / FHWA) with concrete block (M-35) as facia,
casting & erection of blocks with Techgrid, providing &
laying of levelling pad of M-15, providing and laying
coping beam (M-35), providing and laying 300mm thick
filter-media etc. completed as per approved drawing
and instruction of engineer in-charge excluding
providing, laying and compacting selected backfill and
retained fill behind the wall, excavation and ground
improvement, if any. The reinforced earth wall and
slope should have 100% coverage of 5m width Knitted
and PVC coated Polyester Geogrid of Techfab India.
(Coating of Geogrid/ Reinforcing geosynthetic material
with LDPE, Latex, Bitumen and any other coating will
not be allowed and will not be accepted).
031111 For Wall Height 1m to 4m Sqm 6722.69

Page 4 of 8
Cement
Qty. (qtl.)
031120 Fabrication of precast concrete structures in the Cum 58270.21 As per appd.
designated plant as per design, using M-50 grade Design mix.
concrete with proper graded aggregate, 53-grade
Ordinary Portland Cement, admixtures conforming to
IS:9103, high yield deformed bars at 10% to 12% by
weight of concrete, lifting hooks for erection; produced
under controlled factory environment {cost includes
inspection and testing by Railway's approved agency}
for Precast Concrete Columns, Beams, Staircase,
Landings, Handrails, Slabs, Foundation Footings etc.
031130 Fabrication of Precast Prestressed Concrete Structures

in the designated plant, as per design using M-50 grade
Concrete with proper graded aggregate, 53-grade
Ordinary Portland Cement, admixture conforming to
IS:9103, high yield deformed bars Fe-500, High tensile
steel (pre-stressing strands) of approved make and
size, necessary corrugated ducts for grouting &
stressing, lifting hooks for erection; prestressing done
as per design using callibrated pump & jacks {cost
includes inspection and testing by Railway's approved
agency} for :
031131 Precast Prestressed Concrete Beams and Hollow-core Cum 61822.85 As per appd.
Slabs with 12 steel strands of 12.7mm dia. conforming Design mix.
to IS:1785
031132 Precast Prestressed Hollow-core slabs, 200mm thick Cum 61593.65 As per appd.
with upto 10 strands of 12.7mm dia. Design mix.
031133 Precast Prestressed Hollow-core slabs, 160mm thick Cum 61421.75 As per appd.
with upto 8 strands of 12.7mm dia. Design mix.
031140 Transportation of Precast Concrete Structures, such as MT 2006.23
Columns, Beams, Slabs, Staircase assembly etc. from
manufacturing plant to the site of construction on 20 ton
capacity trailor trucks duly tightened and secured for
safe transport without causing any damage to the
structures; Complete job including loading / unloading
and properly stacking as per direction of Engineer in-
charge with lead upto 100 km
031150 Additional lead of every 10 kms or part thereof over 100 MT per 10Km 46.10
km and upto 3000 km over Item no. 031140 lead
031160 Erection of Precast factory-made concrete structures, Cum 3997.42
such as Column Footings, Columns, Beams, Staircase
assembly, Hollow-core Slabs, Handrails etc.; complete
job including erection, fixing, assembling with proper
supports and fixing with nuts/bolts and grouting using
non-shrink grouts, as directed by Engineer In-charge.
{Note - excavation, base concrete etc. shall be paid
separately under relevant items of USSOR for various
uses)
Page 5 of 8
Cement
Qty. (qtl.)
031170 Designing, casting and launching of Pre-stressed
Concrete Girders for construction of Road under
Bridges / Railway Bridges with deck slab including
diaphragm with contractor's construction scheme,
approved by Railway including side kerbs and 0.90m
wide box type foot path on one side and ballast retainer
on other side or as required as per site condition with M-
45 / M-50 Grade controlled concrete of approved mix by
weigh batching, using 20mm and down grade hard
granite stone aggregate of approved quality, admixture
etc. including casting PSC Girders, pre-stressing and
grouting in stages, supplying and fixing Elastomeric /
Pot-PTEF / Pot Bearings at both ends complete work as
per approved relavant drawings in accordance with the
relevent Codes and treating deck with M-25 grade
cement concrete wearing coat of 75mm thickness at
centre and 50mm thick at edges, applying hot bitumen
of 80/100 (1.7 kg/sqm) over surface of wearing coat as
per approved drawing all inclusive but excluding cost of
cement, reinforcement etc., which shall be paid
seprately under relevant items.
031171 For girders of spans 18 metres and above with 5.7m Per Metre of 86982.10 4.50 or as
overall width Clear Span per appd.
Design mix.
031172 Add or deduct in rates of USSOR Item no. 031171 for Per Metre 15260.02 4.50 or as
every one metre or part thereof increase or decrease in Width of per appd.
overall width of girder Girder Design mix.
031173 For girders of spans less than 18 metres with 5.7m Per Metre of 78924.31 4.50 or as
overall width Clear Span per appd.
Design mix.
031174 Add or deduct in USSOR Item no. 031173 for every one Per Metre 13846.37 4.50 or as
metre or part thereof increase or decrease of overall Width of per appd.
width of girder Girder Design mix.
031180 Providing Flood Level Gauges on abutments and piers, Sqm 487.63 0.09
made by 20mm thick 1:4 cement plaster for a width of
not less than 300mm, duly engraving markings &
figures in metres, divided into 10 parts commencing
from under-side of girders towards bed, painting
markings & figures with black enamel paint in three
coats on white background including painting HFL Mark
in white by side of gauge with year of occurance with all
Contractor's materials, labour, tools, scafolding and
supports, lead & lifts, curing etc. complete as per
approved drawing and as directed by the Engineer in-
charge
Page 6 of 8
Cement
Qty. (qtl.)
031190 Designing, casting, lowering and launching of PSC 'I' /
Box Girders for Road over Bridges with deck slab (cast
in-situ or precast) M-45 to M-50 grade concrete of
approved mix by weigh batching, using 20mm & down
graded hard granite stone aggegate, admixture etc.
including casting PSC girders on piers (or casting on
bed and launching on to bed blocks) without causing
any disruption to normal running traffic as per railway's
approved drawing for making overall width as specified
in GAD and prestressing & grouting in stages as per
relavent Codes and keeping girder in position on
bearings, including supplying & fixing Elastomeric / Pot-
PTFE / Pot Bearings as per Railway's approved
drawings including providing cement concrete wearing
coat 75mm uniform thickness etc. complete all inclusive
but excluding cost of cement, reinforcement etc., which
will be paid as per item in respective schedule as per
specifications and as directed by Engineer in-charge
031191 For girders of spans 25m & above with 12m overall Per Metre of 82693.67 4.50 or as
width and to required construction depth Centre to per appd.
Centre Span Design mix.
031192 Add or deduct in USSOR Item no. 031191 for every one Per Metre 6891.14 4.50 or as
metre or part thereof increase or decrease of overall Width Of Slab per appd.
width of girder Design mix.
031193 For girders of spans less than 25 metres with 12m Per Metre of 72540.24 4.50 or as
overall width and to required construction depth Centre to per appd.
Centre Span Design mix.
031194 Add or deduct in USSOR Item no. 031193 for every Per Metre 6045.02 4.50 or as
one metre or part thereof increase or decrease of Width Of Slab per appd.
overall width of girder Design mix.
031200 Casting of pre or post - tensioned PSC Slab units of Cum 15074.88 4.50 or as
spans as per Railway approved design & drawing, using per appd.
M-45 grade controalled concrete with all contractor's Design mix.
materials, labour, tools/plant & machinery inculding all
lead & lift complete excluding cost of cement &
reinforcement which shall be paid as per item in the
respective schedule and as directed by Engineer in-
charge
031210 Extra over USSOR Item no. 031200 for casting skewed Cum 1507.49 4.50 or as
angle slabs instead of regular shaped slabs per appd.
Design mix.
031220 Providing and fixing in position GI Drainage Spouts of
required length with Grating in RCC slab and filling
bitumen along kerb as shown in drawing with
contractor's pipes, bitumen, tools, equipment, lead, lifts
etc. complete as per specifications and as directed by
Engineer in-charge
031221 50mm dia. Drainage Spouts Metre 470.13
031222 100mm dia. Drainage Spouts Metre 1005.36
Page 7 of 8
Cement
Qty. (qtl.)
031230 Reinforced Cement Concrete M-30 / M-35 / M-40 grade Cum 4017.71 4.50 or as
for RCC deck slab on Steel 'I' girder cast-in-situ, using per appd.
controlled concrete by weigh batching / using RMC with Design mix.
contractor's materials, steel shuttering, staging,
scaffolding, supports, labour, tools, plant & machinery,
lead/lifts, curing etc. complete including leaving
necessary reinforcement rods for providing parapet as
per approved drawings and MOST standard drawings &
specifications, as directed by Engineer in-charge but
excluding cost of cement & reinforcement steel {cost of
cement & steel will be paid as per items under
respective schedule items}
031240 Applying Epoxy Poly-sulphate Paint three coats on Sqm 269.00

existing bottom surface of deck slab including cleaning
surface of dirt, dust & other foreign matter, sand
papering, wire brushing as required with all contractor’s
materials tools, machinery, scaffolding, lead, lifts etc.
complete as per specifications and as directed by
Engineer in-charge
031250 Supplying and laying 160mm dia. PVC Pipes Class-I, Metre 455.57
capable for a pressure of 2.5 kg/sqm in footpath of ROB
for laying cable with all contractor’s materials labour,
tools, plant, machinery, vehicles, consumables, lead, lift
etc. complete as per specifications and as directed by
Engineer in-charge
Page 8 of 8
IR's Unified Standard Schedule of Rates 2019 Chapter-4 : Bridge Works- Super Structure- Steel
CHAPTER - 4 : Bridge Works : Super Structure- Steel

Item No. Description Of Item Unit Rate (Rs)
Note- Items in this chapter are for works not requiring traffic block
unless otherwise specified in the relevant item. All items are for clear
span upto 45.7m unless otherwise specified.
041010 Supplying of all types of structural steel conforming to Fe 410 B of
IS:2062, fabrication, assembling, erection / slewing / end launching
of steel girders (not requiring traffic block) upto 45.7m span on sub-
structure including provision of trolley refuges, if required complete
as per approved drawing including one coat of Zinc chrome primer to
1S:104 & one coat of Zinc Chrome Red Oxide to IS:2074 and
painting as per IRS-B-1 on all members (detailed fabrication and
erection drawings & launching methodology will be prepared and got
approved by the contractor from Railway). Rate includes fabrication
of all the types of battens, bracings, ties, stiffeners, packing,
diaphragms, shop rivets / welding, T&F bolts, drifts, shop welds,
templates, jigs, fixtures, back up supports, accessories, transporting
various components from fabrication shop to site, including loading,
unloading, lift and taxes complete, assembly of girders' on-
drifts/bolts, field riveting/welding, assembling of temporary support
for side slewing, raising of girders to the bed block level, providing
sliding arrangements and slewing the girder in position, lowering of
girder on bearings and bed plates, grouting holes in the bed block for
fixing of HD bolts/anchor pins of bed plates, all temporary
arrangements. Load testing may be done under Chapter-5. The
bearing sets to be provided with the girders will be paid separately as
per relevant item separately.
Payment Schedule
(i) Material at site – 40%
(ii) Fabrication at site – 15%
(iii) Erection/Launching – 20%
(iv) Completion incl. painting & finishing – 25%
041011 Plate Girder/Semi Through Girder MT 108688.60
041012 Open web Girder MT 121422.95
041013 Extra for metalising including preparation of surface and applying Sqm 713.89
one coat etch primer to IS:5666
041014 Extra for using steel conforming to Fe 490 of IS:8500 instead of Fe MT 1161.50
410
041015 Deduct for using steel conforming to Fe 410 A of IS:2062 instead of MT 1161.50
Fe 410 B
041020 Assembling and erection of fabricated material including rocker and
roller bearings with crane/derrick at site on sub structure with labour,
equipment, T&P including site riveting/welding with all temporary
arrangements, scaffolding etc. with contractors design and scheme
for longitudinal launching/side slewing (not requiring traffic block)
approved by Railway. Rate includes field rivets / welding, drifts,
service bolts etc. as per drawings
041021 Plate Girder/Semi Through Girder MT 22585.10
041022 Open Web Girder MT 25192.57
Page 1 of 6

041030 Fabricating, supplying and fixing in position Galvanized steel channel MT 119575.59
sleepers of mild steel of tested quality conforming to IS:2062, on
fabricated girders including all fixtures fastenings as per approved
Railway drawings with labour, material, tools and plants etc. as a
complete job including galvanizing of all components
041031 Extra for working under running traffic/traffic block conditions on item MT 20027.02
041030
041040 Fabricating, supplying and fixing of 6mm to 8mm thick steel MT 81307.90
chequered plate conforming to IS:3502 for pathway, trolley refuges,
floor for the bridge including fixing the same over steel channel
sleepers by drilling holes in channel sleepers and trolley refuges
including nuts & bolts, tools & plants, labour as a complete job
041050 Metalising of steel work of girder with grit blasting as per IRS-B1- Sqm 858.02
2001 following by one coat of etch primer (as per IS:5666) one coat
of Zinc Chrome primer (as per IS:104) and two coats of aluminium
paint (as per IS:2339) with all labour, T&P and material as a
complete job
041060 Providing and fixing 65/50 mm nominal dia B class G.I. pipe railing Kg 91.89
used in rows for footpath or anti-crash barrier railing including cost of
M.S. angle and channels in vertical posts, riveting, welding / rivetting,
priming painting two coats, at all heights labour and material as a
complete job
041070 Supplying and fixing anti-slip M.S. Angles/nosing 65mmx 65mmx Kg 92.31
8mm or any other size confirming to IS:2062 fixing 10mm dia, anchor
bar 600mm c/c and fixing with main girder with M.S. flat on top of
step of stair case, making anti-slip grooves 7 nos. arrangement for
keeping and maintaining in position as per approved plan with all
labour and material as a complete job.
041080 Providing/fixing/leaving/grouting various size HTS bolts / holding Kg 126.61
down bolts in concrete column or in other structural steel member
with proper nuts, bolts, washers/plates as a complete job. Note -
Cement used in grouting will be paid separately under relevant item.
041090 Providing, cutting, fabricating, treating, fixing & painting structural MT 91598.94
steel conforming to IS:2062 in access ladders, inspection platforms,
Trolley refugee, railing etc. joints welded to neat finish including one
coat of primer & two coats of synthetic enamel paints
041100 Supplying, fitting and fixing in position true to line and level cast steel MT Bearing 535.36
rocker bearing complete as per IS :7666, IS:9565, IS:1030, IS:919, Capacity
IS:3073 and as per Bridge Code including all accessories as per
drawing and Technical Specifications
041110 Supplying, fitting and fixing in position true to line and level forged MT Bearing 584.04
steel roller bearing conforming complete as per IS:7666, IS:9565, Capacity
IS:1030, IS:919, IS:3073 and as per Bridge Code including all
accessories as per drawing and Technical Specifications
041120 Supplying, fitting and fixing in position true to line and level sliding MT Bearing 1497.38
plate bearing with PTFE Surface sliding on stainless steel as per Capacity
BS:3784, BS 5400, complete including all accessories as per
Drawing and Technical Specifications
Page 2 of 6

041130 Design, supplying, fitting and fixing in position true to line and level Cu Cm 0.01
elastomeric bearing conforming to IS:3400, IS:226, BS-5400
complete including all accessories as per drawing and Technical
Specifications
041140 Supplying, fitting and fixing in position true to line and level POT-
PTFE bearing consisting of a metal piston supported by a disc or un
reinforced elastomer confined within a metal cylinder, sealing rings,
dust seals, PTFE surface sliding against stainless steel mating
surface, complete assembly to be of cast steel / fabricated structural
steel, metal and elastomer elements complete as per IS:2062,
IS:1030, AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226, BS-
5400, Bridge Code and as per drawing and approved Technical
Specifications. The design of the bearings shall be submitted by the
manufacturers / contractor and got approved from Railway before
fixing. Test report of the bearings should be got approved before the
materials are lifted from the manufacturer premises. Payment is
based on 250 MT capacity of Bearing.
041141 POT-PTFE Bearing MT Bearing 536.88

Capacity
041142 POT Bearing MT Bearing 512.61
Capacity
041143 PIN Bearing MT Bearing 440.51
Capacity
041150 Providing vertical guide bearings as per approved drawings and MT Bearing 462.64
fixing them with transversal and longitudinal stoppers using Capacity
reinforced neoprene pads and PTFE-SS sliding system as per
approved drawings and specifications. Payment is based on 180 MT
capacity of Bearing.
041151 Longitudinal stopper bearings MT Bearing 447.87
Capacity
041152 Transverse stopper bearings MT Bearing 621.85
Capacity
041160 Supply & applying two coats of bitumen emulsion of Grade RS-1, Sqm 146.50
conforming to IS:8887 (latest) on the top surface of steel deck slab
(New bridges) @ 1.70 kg/sqm after cleaning surface with all
materials, labour, tools and plants, equipment etc. complete.
041170 Painting steel works (new bridges) with two cover coats of red oxide Sqm 107.37
paint conforming to IS:123 (latest) as per IRS-B1-2001 to give an
even shade with all labour & material including scaffolding, shuttering
and strutting alongwith provision of Jhoola/hanging scaffolding where
required
041180 Providing road crane of different capacity with different jib length
revolving type for material handling, assembly & erection of
girders/slab/RCC Box etc.
041181 12MT capacity with 36 feet jib Day 4785.38
041187 Extra for increase in road crane capacity with jib of desired length MT 348.45
over Items 041181 to 041186 for every additional 5 MT capacity or
part there of
Page 3 of 6

041190 Cleaning of steel work of bridge girders upto 30.5m clear span with Sqm 39.26
scrappers and/or wire brushes to remove all rust and loose or
perished paint to prepare perfectly clean & dry bare metal surface
free from all dirt/foreign material & ready for initial coat of paint. Rate
includes cost of labour, consumables, brushes, tools & plants,
ladders, scaffoldings, jhoola, hanging scaffolding staging etc.
041200 Surface preparation for cleaning of steel work of bridge triangulated Sqm 58.90
girders with scrappers and/or wire brushes to remove all rust and
loose or perished paint to prepare perfectly clean & dry bare metal
surface free from all dirt/foreign material & ready for initial coat of
paint. Rate includes cost of labour, consumables, brushes, misc.
tools and plants, ladders, scaffoldings, jhoola, hanging scaffolding,
staging etc.
041210 Surface preparation for painting of bridge girders and other steel Sqm 40.85
structures where the finishing coat shows signs of deterioration; but
primer coat of paint is sufficiently in good condition and there are no
signs of rusting etc. Surface shall be cleaned free from oil grease,
scaling and other foreign matters without disturbing the primer coat
{Rate includes cost of labour, consumables, tools & plants,
scaffolding, jhoola, ladder etc.}
041220 Painting cleaned bridge plate girders including all scaffolding,
shuttering and strutting along with provision of Jhoola / hanging
scaffolding where required
041221 With one coat ready mix Zinc Chromate conforming to IS:104 Sqm 65.17
followed by one coat of Zinc Chromate red oxide conforming to
IS:2074
041222 With two cover coats of ready-mixed paint to IS:13607 with Sqm 78.95
colour/shades, as decided by Engineer-incharge
041223 With two coats Aluminium paints in dual containers conforming to Sqm 71.63
IS:2339
041224 With two coats epoxy paint Sqm 98.98
041230 Painting cleaned bridge girders exceeding 30.5m clear span
including all scaffolding, shuttering and strutting along with provision
of Jhoola / hanging scaffolding where required
041231 With one coat ready mix red lead conforming to IS:102 Sqm 45.32
041232 With one coat ready mix Zinc Chromate conforming to IS:104 Sqm 69.96
followed by one coat of Zinc Chromate red oxide conforming to
IS:2074
041233 With two cover coats of ready-mixed paint to IS:13607 with Sqm 83.74
colour/shades, as decided by Engineer-incharge
041234 With two coats Aluminium paints in dual containers conforming to Sqm 76.42
IS:2339
041235 With two coats epoxy paint Sqm 103.77
Page 4 of 6

041240 Supplying and applying Zinc Film Galvanization on Steel Girder
Bridges for corrosion protection with Zinc Rich High Performance
Coating System loaded with fine, lamellar and spherical zinc particles
having diameter, length and breadth in the range of 5 to 15 microns,
blended in neutral resins for long life protection against corrosion of
steel, as per RDSO specification no. M&C/PCN/125-2009 alongwith
inspection and all the mentioned tests on the product with coating of
Zinc Rich Paint and Zinc Solvent of required DFT (Dry Film
Thickness) including surface preparation (mechanical cleaning) by
sand / grit blasting to Sa 2.5 of ISO specification no. 8501-88 and
application by spray / brush painting on the prepared surface with all
labour, material including scaffolding, shuttering and strutting
alongwith provision of Jhoola/hanging scaffolding wherever required
and T&P etc. as a complete job for -
041241 DFT (Dry Film Thickness) Coating of 80 micron for Rural & Arid Sqm 2059.80
environment
041242 Extra over Item no. 041241 for DFT (Dry Film Thickness) Coating of Sqm 698.79
120 micron for Medium Industrial & Marine environement
041243 Extra over Item no. 041241 for DFT (Dry Film Thickness) Coating of Sqm 2104.82
200 micron for Severe Industrial & Marine enviroment
041250 Supply, fabrication and erection of bed plate of approved sizes in
exact position over bed block on pier/abutments by giving full and
even bearing, setting them on the layer of free flow non-shrinkable
grouting compound, scrapping or chipping of bed block, if required,
fabrication and fixing of HD bolts of suitable sizes alongwith nuts,
washers etc., drilling holes of required size, grouting of holes by
epoxy mortar after fixing HD bolts. Total work to be done during
traffic block.
041251 Upto 12.2m clear span Kg 338.83
041252 More than 12.2m, but upto 18.3m clear span Kg 423.53
041253 More than 18.3m, but upto 30.5m clear span Kg 564.95
041260 Assembling and erecting pre-fabricated structures, such as columns, MT 6020.08
beams, girders, other members of FOBs and sheds; including
leading all structural elements within 1 Km lead, bolting, riveting or
welding as per approved drawing or as directed by Engineer In-
charge with two coats of aluminium paint conforming to IS: 2339 on
all exposed surface. Rate shall include cost of labour, materials, tools
& plants and only pre-fabricated structural elements shall be given by
Railway. (Work not requiring traffic or power block)
041270 Extra over item no 041260, if the work is to be executed under traffic MT 1224.37
or power block
041280 Cleaning and greasing of free end and fixed end of steel girder
Bridge bearing with Grease Graphite, Kerosene oil and other
materials as per instruction given in Para 222 of Indian Railway
Bridge Manual 1998 with painting of Bearing as per requirement
complete as directed by engineer in-charge
041281 Girder size from 40' to 80' Each 6917.89
041282 Girder size above 80' & upto 150' Each 10251.01
041290 Launching & fixing in exact location of all type of steel MT 1892.55
girders,complete job including lead within five kilometres& lifting to
any hight as per site requirment, provision of approaches,
cleaning/repairs to bed blocks etc.
Page 5 of 6

041300 Delaunching & shifting steel girders to desired location, complete job MT 1227.71
including lead within five kilometres, all ascends, descends as per
site requirment, provision of approaches etc.
041310 Dismantling of BG / MG girder into individual components, duly MT 4692.00
breaking / cutting rivets / bolts etc. and depositing released materials
in Railway's store, as directed by Engineer in-charge complete job
with contractor's labour, tools, plant, leads, lifts, consumables etc.
Page 6 of 6
IR's Unified Standard Schedule of Rates 2019 Chapter-5: Bridge Works- Misc.
CHAPTER - 5 : Bridge Works- Misc.

Cement
Qty. (qtl.)
051010 Providing and laying boulders apron on river bed for Cum 1617.20
protection against scour with stone boulders weighing
not less than 35 kg each with voids filled with spalls
complete as per drawing and Technical Specification
051020 Laying of boulder apron laid in wire crates of approved Cum 695.88
size including overlaps at joints, laid with stone boulders,
all loose ends to be tied with 4mm galvanised steel wire.
Payment for boulders & wire crates to be done extra
051030 Supplying Galvanized Wire Net Trungers made from Sqm 332.07
4mm galvanised steel wire @ 32 kg/10sqm having
minimum tensile strength of 300 Mpa conforming to
IS:280 and galvanizing coating conforming to IS:4826,
woven into mesh with double twist, mesh size not
exceeding 100mm x 100mm
051040 Providing and laying of Apron with cement concrete Cum 3133.22 3.2
blocks cast in-situ and made with nominal mix of 1:2:4
with a minimum cement content of 250 kg/cum
{Note : (1) Payment to be made for blocks only; (2)
Cement and shuttering to be paid extra}
051050 Providing and laying Pitching with Stone Boulders, Cum 1835.45
weighing not less than 35kg each with voids filled with
spalls on slopes, laid over prepared filter media including
boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical Specifications
(filter media to be paid separately under the relevant
item)
051060 Providing and laying Pitching with Stone Boulders, Cum 3167.22 1.25
weighing not less than 35kg each with voids filled with
cement sand mortar 1:4 on slopes laid over prepared
filter media including boulder apron laid dry in front of toe
of embankment complete as per drawing and Technical
Specifications (filter media to be paid separately under
the relevant item)
051070 Providing and laying Filter Material as per RDSO Cum 1846.55
Specifications underneath pitching in slopes complete as
per drawing and Technical Specification
051080 Providing & laying of a Permeable Geo-textile Filter
between pitching and embankment slopes on which
pitching is laid to prevent escape of embankment
material through voids of stone pitching/cement concrete
blocks as well as to allow free movement of water
without creating any uplift head on pitching, as per
RDSO Guidelines -
051081 With GJT-Type 1 (for harsh conditions) Sqm 45.92
051082 With GJT-Type 2 (for less severe conditions) Sqm 52.94
051083 With GJT-Type 3 (for moderate conditions) Sqm 67.56
Page 1 of 10
Cement
Qty. (qtl.)
051090 Laying Boulder Apron on river bed for protection against Cum 833.38
scour with stone boulders supplied by Railway with voids
filled with spalls complete as per drawings and Technical
Specifications, with maximum lead upto 150m
051100 Laying Pitching with Stone Boulders supplied by Railway Cum 338.72
with voids filled with spalls on slopes, laid over prepared
filter media including boulder apron laid dry in front of toe
of embankment as per drawings and technical
specifications with maximum lead upto 150m (filter
media to be paid under relevant item)
051110 Insertion or removal of Railway's Steel Cribs (CC Cribs) Each 236.85
of nominal size 0.6m x 0.6m x 1.8m with hard wood
packing for temporary arrangements / scaffolding
including handling from and to stacks at nominated
locations at site with all labour, tools, plant, machinery,
lead upto 250m and all lift etc., complete and as directed
by Engineer in-charge
051120 Stenciling of Girders with yellow background and black / Each 31.19
blue lettering with ready mix paint w.r.t. executed
inspection, greasing and painting/writing date on girder
bridge, as directed by Engineer in-charge
051130 Cleaning Surface of Abutment and Piers upto bed level Sqm 97.38
under water with brush or any other tools to remove all
traces of moss, loose materials, fungus, algae,
vegetational growth etc. Cleaning shall be carried out
with contractor's trained staff, tools & plants, safety
equipments etc. complete job including arranging safe
approach
051140 Inspecting Sub-structure and Foundation in and around Hour 963.46
piers & abutments, using trained and qualified staff,
under-water cameras, monitoring sensors & safety
equipments, recording observed defects, e.g. cracks,
cavities, buldging, leaning spalling and other defects
noticed in the structure on video cassetes & photographs
and submitting detailed inspection report to Engineer in-
charge. Payment shall be made on hourly basis of
videography & photography
Flooring in Bridges
052010 Providing and laying flooring with rubble stone, laid over Cum 2254.97 1.12 for
15cm thick CC 1:2:4 and the voids filled with CC 1:2:4 rubble stone
complete with the joints pointed with 1:2 Cement Sand only
mortar as per drawing and Technical specifications.
Payment for cement to be done separately. Voids in the
rubble stone to be taken as 35% of the gross volume of
the stone layer. (Base concrete to be paid extra)
Page 2 of 10
Cement
Qty. (qtl.)
052020 Providing and laying 300mm thick (average) Dry Stone Cum 1746.41
flooring with boulders of not less than 35kg each in
weight, hand packed with surface levelled off to the
correct section with hammer dressing as necessary on
the ground including filling the gaps with quarry spalls
and ordinary sand complete including cost of supply of
all materials, labour, lead, lift, tools, plants, crossing of
tracks and the like as per drawing and technical
specification as directed by Engineer in charge
052030 Supply and laying of quarry dust including consolidation, Cum 1604.15
supply of all materials, labour, lead, lift, tools, plants,
crossing of tracks as per drawing and technical
specification as directed by the Engineer in charge in
case loose slush is encountered at site of foundation
before casting the foundation or before laying the filtering
media (payment based on stack measurement).
052040 Supply and laying of coarse sand including Cum 2730.80

consolidation, supply of all materials, labour, lead, lift,
tools, plants, crossing of tracks as per drawing and
technical specification as directed by the Engineer in
charge in case loose slush is encountered at site of
foundation before casting the foundation or before laying
the filtering media (payment based on stack
measurement)
052050 Guniting concrete surface with cement mortar of Sqm 1030.27 0.16
average thickness 25mm, applied with compressor after
cleaning surface and spraying with epoxy complete as
per Technical Specification in the ratio of 16kg of cement
to 0.04cum of sand, 50mm x 50mmx3mm size wire
mesh, with 0.67kg of epoxy and 0.64kg of accelerator
compound for guniting per sqm
052060 Providing and inserting nipples of size 12 to 20 mm dia. Each 56.18
with approved fixing compound after drilling holes for
grouting as per Technical Specifications including
subsequent cutting/removal and sealing of the hole as
necessary after completion of grouting
052070 Sealing of cracks/porous concrete by injection process
through nipples/grouting complete as per Technical
Specification
052071 Neat Cement Grout with 20% anti shrinkage compound Kg 257.48 as per actual site
w.r.t. cement consumption
052072 Cement Sand Mortar (1:1) Grout with 20% anti- Kg 356.87 as per actual site
shrinkage compound w.r.t. cement consumption
052073 Epoxy Grout Kg 1031.27

052080 Patching of damaged concrete surface with Pre-packed Sqm 476.31
polymer concrete with average thickness of
25mm.Curing compounds, initiator and promoter,
available in the formulations, to be applied as per
instructions of manufacturer and as approved by the
Engineer in charge.
Page 3 of 10
Cement
Qty. (qtl.)
052090 Applying epoxy mortar over leached, honey combed and Sqm 1094.22
spalled concrete surface and exposed steel
reinforcement complete as per Technical Specification
with average thickness of 10mm including priming coat,
mortar plaster and seal coat of epoxy
052100 Removal of defective concrete, cleaning the surface Sqm 1111.58 0.16
thoroughly, applying the shotcrete mixture mechanically
with compressed air, comprising of cement, sand,
coarse aggregates, water and quick setting compound
as approved, gunite strength not less than 25 Mpa with
average thickness of 40mm in the ratio of 16 kg of
cement to 0.04cum of sand, 50mmX50mmX3mm size
wire mesh with 0.67 kg of epoxy and 0.64 kg of
accelerator compound for guniting per sqm
052110 Applying pre-packed cement based polymer mortar of Sqm 400.34

strength 45 Mpa (28 days) for replacement of spalled
concrete with average thickness of 10mm
052120 Providing & applying epoxy for bonding of new concrete Sqm 660.84
to old concrete @ 0.80 kg/sqm with pot life not less than
60-90 minutes and as per specifications including
cleaning the surface
052130 Providing & fixing 12 mm rabbit wire mesh at the junction Sqm 113.07
of RCC where specifically ordered or as shown in the
drawing
052140 Providing, cutting, fabricating, treating, fixing structural MT 117181.70
steel as per IS:2062 in access ladders (top of girder/slab
to pier cap), inserts, platforms, railing, trolley refuges,
drain pipes etc. by drilling holes and grouting with C.C.
as per specifications including painting with two coats of
approved paint over two coats of primer. (cement for
grouting shall be paid separately)
052150 Providing / fixing / grouting various size HTS holding Kg 170.87 0.01
down bolt in concrete column or in other structural steel
member including drilling holes of required size, bolts
threaded at both ends shall be fixed with proper size
nuts bolts, plates, washers complete including all labour
and material
052160 Providing weep holes by making suitable opening or Metre 367.37 0.02
drilling in existing Brick Masonry / Plain / Reinforced
Concrete abutment, wing wall/return wall with 100 mm
dia. AC pipe, extending through the full width of the
structure complete and repairing the same with cement
mortar 1:2 (1 cement : 2 coarse sand)
052170 Providing and fixing of Drainage Spouts of 100mm Metre 4776.13 0.01
UPVC complete with cement mortar 1:2 (1 cement : 2
coarse sand)
Page 4 of 10
Cement
Qty. (qtl.)
052180 Providing and laying of filter media consisting of granular Cum 2201.50
materials of GW, GP, SW groups as per IS:1498 (latest)
in required profile behind boulder filling of abutments,
wing walls / return walls etc. above bed level with all
labour and material complete job as per drawing and
technical specification of RDSO Guidelines
052190 Removing all loose concrete, cleaning rust with dusting

compound & water jet, drying, replacing worn out
reinforcements by welding new reinforcement for making
up lost steel section, applying approved anti-corrosive
polymer coating over the damaged area to proper profile,
providing polymer mortar (upto 20mm thickness) or
polymer concrete (more than 20mm thickness)
consisting of cement, sand, 6mm down chips where
required and polymer as per manufacturers'
specification. The rate includes curing for 14 days, all
materials, consumables, labours, tools and plants,
scaffolding/staging with all lead and lift. Cost of cement
& inforcement to be paid separately.
052191 20mm thick polymer mortar Sqm 1474.86 0.122
052192 20mm-50mm thick polymer concrete Sqm 1093.04
052200 Supply, fabrication and erection of steel members to MT 161547.21
replace existing corroded members of built up section
made up of MS plate, angles, channels of different
thickness and sizes including painting with one coat of
ready mix paint Zinc Chromate priming to IS:104
followed by one coat of ready mix paint red-oxide Zinc
Chrome primining paint to IS:2074. Structural steel
should conform to IS:2062-Gr.'B'. Fabrication and
erection to be as per existing design initially by bolts and
nuts and finally by rivetting during the sanctioned traffic
block. Payment for rivets and riveting to be made
separately. Rate includes cutting of new steel work,
drilling for riveting, dismantling of any existing members
required for inserting fabricated members, fixing of new
fabricated built up members with all tools, plants, labour,
consumables, machinery and accessories etc. Work will
be executed as per IRS:B 1-2001.
052210 Supplying and changing of corroded worn-out and loose

rivets of any size at any location of the bridges with or
without traffic blocks including all tools, plants,
machinery complete in all respects.
052211 For Rivets of size upto 25mm dia. Each 235.16
052212 For Rivets of size more than 25mm dia. Each 383.04
052220 Dismantling of existing bed plate from existing bed block Each Plate 9187.95
by cutting & removal of HD bolts and nuts with all tools,
plants, machinery scaffolding, labour and other materials
and shfiting it at one end of the bridge during traffic
block.
Page 5 of 10
Cement
Qty. (qtl.)
052230 Painting the HFL and danger level marks, year of HFL Each Mark 215.92
on bridge abutments and piers with ready mixed paint as
per standard in two coats over one coat of primer with all
materials, labour, tools, scaffolding, all lead and lift etc.
including writing complete
052240 Providing cast in situ bridge number plaques as per Each 638.83 0.1
Railway drawing in cement concrete 1:2:4 mix using
20mm hard stone aggregate embedded in 30mm notch
in Bridge parapet coping duly engraving the letter and
figures and an arrow indicating the direction of flow and
finishing the top exposed surface with cement mortar
1:3, painting letters and figures with two coats of black
enamel paint on two coats of white background with all
labour, tools, cement, paint etc. with all leads and lifts
052250 Providing cast in-situ plaques for bridge foundations Each 829.66 0.1
details of size 45cmx45cmx5cm in cement concrete
1:2:4 mix using 20mm hard stone aggregate embedded
in 30mm deep notch over abutment & piers, engraving
the letters & figures with CM 1:3 and finished smooth
including painting letters and figures with 2 coats of black
enamel and plaque with white enamel with all labour,
tools, cement, paint, curing etc. as a complete job
052260 Providing & laying non pressure NP-4 Class RCC pipe
with collars, jointing with 1:2 cement and ordinary sand
mortar including testing of joints, but excluding earthwork
with all labour and material as a complete job. Cement
for mortar will be paid separately.
052261 300mm dia. Metre 1600.52
052262 450mm dia. Metre 1879.01
052263 600mm dia. Metre 2212.52
052264 900mm dia. Metre 2992.67
052265 1000mm dia. Metre 3565.69
052266 1200mm dia. Metre 5503.12
052267 1800mm dia. Metre 8391.09
052270 Supplying, spreading and filling coarse sand (no Cum 2544.84
cohesive materials to be used) of approved quality
including watering and ramming in foundation, plinth,
behind the abutment, wing wall, retaining wall in layers
not exceeding 150mm thick including its compaction as
per direction of Engineer-in-charge. The rate includes all
lead, lift, ascent, descent, crossing of Railway line etc.
complete with contractor’s labour, materials, tools and
plant.
052280 Providing Boulder Backing behind wing wall, return wall, Cum 394.44
retaining wall with hand packed boulders & cobbles with
smaller size boulders toward the back including all lead,
lift, labour & other incidental charges as complete work
in all respect. Payment for boulder/cobbles will be done
extra.
Page 6 of 10
Cement
Qty. (qtl.)
052290 Dewatering of natural or accumulated water from any HP Hour 35.23
location. Payment to be done for Horse power of pump
multiplied by pumping hours.
052300 Supplying & fixing Galvanised Steel Wire Ropenet, made of Sqm 1077.57
9mm dia. steel wire rope having aperture size of 45cm x
60cm with 6m long hangs for top anchoring and 5m wide
alongwith chain-link mesh-netting of 80mm x 80mm mesh
size made from 2.4mm dia galvanised wire, joining of chain-
link mesh & steel wire ropenet and joining of adjacent nets
with galvanised spiral lock springs of steel wire dia 2.2mm;
inner dia. of springs 18mm; total length 50mm ± 0.5mm;
pitch 4mm & open end length 60mm including cutting of
tree/shrub etc. in rope-netting location and also,
excavation / filling-back of trenches in all types of soil after
anchoring ropenet with RCC pre-cast beam of size 15cm x
15cm x 2m of M-15 concrete & 30cm thick M-10 PCC. This
work also includes supply of 200mm x 200mm x 6mm
epoxy coated washer plates with 12.5mm / 18mm dia. hole
at centre and supplying & fixing of anchor bolts/fastners of
10mm dia. including drilling of holes upto a depth of 110mm
in rock; cleaning of holes; fixing of fastners with nut &
epoxy coated washer plates; applying torque 65 to 70
N/mm for fixing of ropenet for intermediate anchoring on
the surface of cutting, bottom anchoring upto 1m depth by
using 16mm dia. HYSD steel bolts, threaded upto 200mm
on top and fixing epoxy coated washer plate, fabrication &
fixing of U-pin on top of cutting for top anchoring and
joining of adjacent nets with spiral spring and fixing at the
ratio of 1 no. per 0.6m in longitudinal direction of net portion
and additional locks for lacing chain link netting with
ropenet with contractor's materials, machinery, tools &
plants, cement, steel, labour, lead, lift, transportation,
ascent, descent, taxes, royalty etc. complete as per
directions of engineer-in-charge.
052310 Supplying & fixing of Erosion Control Geomat (for Sqm 240.64
surfacial erosion control) consisting of 2 layers of
polymeric netting, having aperture size of 20mm x 20mm
and a middle layer of coir as per Specifications. Max.
width of rolls/each composite mat shall be 5m with
overall weight of Geomat as 300(+/- 20) gsm. Work
includes dressing of slopes to proper profile & removing
loose rubbles, muck & leading to the point as directed by
engineer in-charge; supply & spreading of good
earth/soil material on slope/berm portion etc. to proper
profile for laying of Geomat anchoring in top anchor
trench; seaming of adjacent panels of Geomat with
HDPE Twine; fabrication & fixing of U-pin on
slope/berms including top of cutting for anchoring of
Geomat as per approved scheme and providing of grass
sods and placing over Geomat so as to completely cover
it, including watering for 2 weeks with all labour, tools &
materials alongwith lead & lift etc. complete
Page 7 of 10
Cement
Qty. (qtl.)
052320 Supplying & placing of Mechanically Woven Double Cum 2742.67
Twisted Hexagonal Shaped Wire Mesh Gabion Boxes of
required sizes, Mesh Type 10cm x 12cm, Zn and PVC
coated Mesh Wire dia. 2.7/3.7mm (ID/OD), edges of
meshes mechanically edged / selvedged with heavy
coating of galvanization as per EN 10223-3/ASTM A 975
with partitions at every 1m interval and properly packed
with approx. 150mm size boulders including
transportation and placing at indicated places as per
direction of engineer-in-charge including contractor's
tools, plants, labour, royalty charges etc. complete in all
respect and stitching with lacing wire of dia. 2.2/3.2mm
(ID/OD) @ 5% by weight of Gabion boxes, carrying the
material by head lead from nearest approach with all
safety precautions and all leads and lifts.
052330 Supplying & placing partly or fully underwater of Cum 2629.91

Polypropylene Tarred Rope Gabion, fabricated from
9mm dia. rope, 100mm x 100mm Mesh with partitions at
every 1m interval and properly packed with
approximately 150mm size boulders including
transportation and placing at indicated places as per
direction of engineer-in-charge with contractor's tools,
plants, labour etc. including royalty charges complete in
all respect and stitching with polypropylene lacing rope of
minimum dia. 4mm; carrying the material by head lead
from nearest approach with all safety precautions and all
leads and lifts
SURFACE PROTECTION OF BRIDGES

052340 Surface protection of Piers, Substructure, Box bridges
and culverts in river bed by cleaning & preparing the
surfaces by acid etching; treating surface with a two-
layer plaster; first layer of 7mm (5mm in case of
sidewalk) thick with cement (OPC or slag) admixed with
an octadecanoic acid based cementitious waterproofing
compound (Max. bulk density 0.5 gm/cc), in the weight
ratio of 50:3 for cement and waterproofing compound
and second layer of 12mm thick cement-sand (1:2.5)
plaster, enriched with polyester fibre (to be paid
separately) and curing the plastered surface. Treatment
shall be impermeable under a water head of 20m.
(Note : In lieu of etching with acid the surface can be
roughened or bond improved by other appropriate
means) complete as per specification.
052341 Piers, substructure, Box bridges and culverts in river bed Sqm 668.63 0.065
052342 Sidewalks Sqm 610.93 0.05
Page 8 of 10
Cement
Qty. (qtl.)
052350 Surface protection of Underside of Bridge Decks, Sqm 382.19
Girders, Inside of Box Girders, Railings etc. of Bridges
and Piers and Substructures which are not in River Bed
by cleaning and drying the surface; repairing local
defects, e.g. honeycombs with a paste of cement
admixed with 5% by weight of cement of Polymer
bonding agent, applying (@ 0.30 litre/sqm) a coat (DFT
of 100-150 micron) of a translucent brown coloured
modified phenolic resin based single component high
performance polymeric waterproofing compound (sp. gr.
0.87, rosin content nil and a solid content of minimum
0.47%), applying (@ 0.25 litre/sqm) a top coat of a
modified phenolic resin based single component
waterproofing compound of grey or other shades (sp. gr.
0.85) before the base coat becomes tack-free; permitting
the coatings to cure and dry naturally; the 2-coat system
shall be impermeable under a water head of 20m,
complete as per specification.
052360 Surface protection of Bridge Deck by cleaning and Sqm 619.75 0.065
preparing the surface by acid etching; treating the
surface with a two-layer plaster; first layer of 5mm thick
with cement (OPC or slag), admixed with an
octadecanoic acid based cementitious waterproofing
compound (bulk density not greater than 0.5 gm/cc) in
the weight ratio of 50:3 for cement and waterproofing
compound, further enriched with specially fabricated
deformed galvanized steel fibre @ 150 gm/sqm of
treated surface and second layer of 12mm thick cement-
sand (1:2.5) plaster, enriched with polyester fibre (to be
paid separately) and curing the plastered surface.
Treatment shall be impermeable under a water head of
20m complete as per specifications.
052370 Shotcreting in two layers (each layer of 38mm thickness) Sqm 1596.57 0.9
with cement concrete mortar 1:1:2 (1 cement : 1 coarse
sand : 2 coarse aggregate) mixing epoxy & fixing welded
wire mesh 50mm x 50mm x 3mm in between two layers
including cost and conveyance of all materials, labour
charges, leads, lifts, centering, scaffolding, machine
mixing, laying concrete with shotcrete machine etc.
complete as per specification and as directed by
Engineer in-charge
Page 9 of 10
Cement
Qty. (qtl.)
052380 Fabrication and erection of height gauge / rail type MT 7322.68 0.54
barricades along RUB/ROBs in postion using
50R/90R/52Kg rails supplied by Railways at depot, duly
excavating pits of size 450mm x 450mm x 600mm for
erection of rail posts of required height in correct
alignment including loading, trasnportations, unloading of
rails from Store Depot to site of work, embedding in
1:3:6 concrete using 40mm size hard stone aggregate
including cutting, drilling of holes in rails and connecting
horizontal rails to the vertical posts with bolts and clamps
duly applying two coats of approved quality primer as per
drawing with contractors materials, as directed by
Engineer in-charge
052390 De-launching / removing existing steel girders / PSC MT 1910.44
slabs including ballast retainers, walk ways etc. of
various spans under line block by crane or by any means
and placing the same on bridge approaches or at toe of
embankment without infringement including cutting
holding down bolts with contractor's labour, tools,
cranes, plant & machinery, consumables etc. complete
and as directed by Engineer in-charge
052400 Designing and developing Detailed Reinforcement
Drawings for following items for ROB/RUB/Bridge based
on Railway's approved GADs, duly collecting necessary
data from Railways and R&B authorities, duly designing
members and submission of check plot duly getting
proof-checked by Railway approved institutes, submitting
for Railway's verification and approval, making
corrections duly incorporating suggestions in
drawings/designs, further submission of original in
transparent film paper and soft copy (CD) for Railways
approval etc. with contractor's technical expertise and
instruments, labour, consumables, repeatedly attending
till final approval etc., complete as directed by Engineer
in-charge
052401 (a) Open / Pile / Well Fondation for RCC columns / piers Each Set 21197.38
052402 (b) RCC Bed Block Each Set 6591.51

052403 (c) Foundation and sub-structure for RCC retaining wall, Each Set 20616.63
abutment and approach slab
052404 (d) Steel 'I' Girders with RCC Deck Slab / PSC 'I' / Box Each Set 84731.43
Girder / RCC 'T' Beam and Slab
Page 10 of 10
IR's Unified Standard Schedule of Rates - 2019 Chapter-6 : Rails, Sleepers, Fittings and Renewals
CHAPTER - 6 : Rails, Sleepers, Fittings and Renewals
Item No. Description of Item Unit Rate (Rs.)
1. Rails :
061010 Pulling & positioning of rails accurately on cess including
supporting rails, providing required gap and squaring at ends
for renewal preparation, as directed by Engineer in-charge
061011 (a) Upto 40 m long rail panel Running 7.32

Metre
061012 (b) More than 40 m long rail panel Running 11.07
Metre
061013 Extra to Item no. 061011 for working on bridge Running 4.33
Metre
061014 Extra to Item no. 061012 for working on bridge Running 5.62
Metre
061020 Removing rail of all types & length from track, laid on any type
& density of sleeper by removing fish plates, fastenings & fish
bolts and other materials alongwith keeping released rail and
all materials safely on cess, as directed by Engineer in-
charge. (cutting & drilling of rail shall be paid separately and
work to be done under traffic block & Railway’s supervision)
061021 (a) BG Track – For Through Renewal work Running 18.96

Metre
061022 (b) MG Track – For Through Renewal work Running 14.94
Metre
061023 (c) BG Track – For Casual/Scattered Renewal work Running 25.78
Metre
061024 (d) MG Track – For Casual/Scattered Renewal work Running 21.48
Metre
061030 Insertion of rails of all types & length in track, laid on any type
& density of sleeper to the specified gauge. Rates include
fastening of rail with sleepers with standard set of fastenings
and fixing of fish plates and bolts or, if required, providing gap
for welding. (drilling and cutting of rail to be paid separately)
061031 (a) BG Track – For Through Renewal work Track Metre 40.11
061032 (b) MG Track – For Through Renewal work Track Metre 31.60
061033 (c) BG Track – For Casual/Scattered Renewal work Running 28.05
Metre
061034 (d) MG Track – For Casual/Scattered Renewal work Running 23.38
Metre
2. Sleepers :
061040 Removing from track existing Wooden / Metal sleepers with
fittings in running track conditions for TSR (Through Sleeper
Renewal) / ISD (Increasing Sleeper Density) works & stacking
the same neatly at specified places with contractor’s tools &
labour, as directed by Engineer in-charge. (For ISD work only
identified unserviceable sleepers to be covered)
061041 For location of work not involving deep screening Each 95.30
061042 For location of work involving deep screening (deep Each 80.38
screening to be paid separately)
1 of 4
061050 Inserting in track Metal / Wooden sleeper lying along the cess
/ formation / slope / toe with all fittings complete for TSR / ISD
work to specified gauge with contractor’s tools including one
packing to make track fit for 20 kmph speed and dressing of
ballast, as directed by Engineer in-charge
061053 Extra to item no. 061051 and 061052 for sleepers lying on Each 20.70
slope / toe of bank beyond initial height of 5 metres
061060 Re-spacing of existing Metal / Wooden sleepers carefully for
Increasing Sleeper Density (ISD) work in track including fixing
all fastenings and initial packing, as directed. (Scope also
includes pre-marking of sleeper spacing as per required
sleeper density)
061061 For location of work not involving deep screening Track Metre 94.47
061062 For location of work involving deep screening (deep Track Metre 69.00
061070 Removing from track the existing PSC sleepers with fittings in
running track conditions for TSR / ISD works & stacking the
same neatly at specified places with contractor’s tools &
labour, as directed by Engineer in-charge. (For ISD work only
061080 Inserting in track the PSC sleepers lying along the cess /
formation / slope / toe with all fittings complete for TSR / ISD
work to specified gauge with contractor’s tools including one
packing to make track fit for 20 kmph speed and dressing of
ballast, as directed by Engineer in-charge
061083 Extra to item no. 061081 and 061082 for sleepers lying on Each 51.75
slope / toe of bank beyond initial height of 5 metres
061090 Re-spacing of existing PSC sleepers carefully for Increasing
Sleeper Density (ISD) work in track including fixing all
fastenings and initial packing, as directed (Scope also
includes pre-marking of sleeper spacing as per required
sleeper density)
061091 For location of work not involving deep screening Track Metre 127.93
061092 For location of work involving deep screening (deep Track Metre 102.34
061100 Replacement of sleepers in track with sleepers lying on cess
for casual renewal at isolated locations with all fittings
complete to specified gauge & cross level with contractor’s
tools including packing and dressing of ballast, as directed by
Engineer in-charge. Released materials shall be neatly
stacked and handed over.
061101 (a) BG Track (PSC to PSC sleepers) Each 380.56
061102 (b) BG Track (Wooden / Metal to PSC sleepers) Each 314.80
061103 (c) BG Track (Wooden / Metal to Wooden / Metal sleepers) Each 270.96
061104 (d) MG Track (PSC to PSC sleepers) Each 232.25
061105 (e) MG Track (Wooden / Metal to PSC sleepers) Each 203.25
2 of 4
061106 (f) MG Track (Wooden / Metal to Wooden / Metal sleepers) Each 186.42
061107 (g) BG Track (Channel to Channel sleepers on Bridges) :
061108 (i) For Non-Track Circuited area Each 394.82
061109 (ii) For Track Circuited area Each 446.57
061110 Replacement of CST-9 plate including carrying serviceable Each 92.47
plate and stacking released plate
3. Fittings / Lubrication Works :
061120 Fixing of fish plate and fish bolt (of 4 fish bolts) on a joint Each 134.14
created in rail of 90R, 52Kg or 60Kg of all UTS, duly
lubricating fish plate/bolts with contractor grease graphite in
running track condition including transportation of fish plate
and fish bolts from nearest station / store / level crossing. (rail
cutting & drilling to be paid separately)
061121 Extra to Item no. 061120 for using fishplate of 6 bolts Each 45.84
061130 Through renewal of Metal / GFN liners in running track Each Sleeper 13.96
condition including removing, cleaning & lubrication of ER
Clip & Insert Eye and re-driving the same with contractor's
grease graphite of approved quality with all lead & lift
061131 Extra to item no. 061130 for lubrication of metal liner and rail Each Sleeper 6.03
foot at liner seat
061140 Through Fitting Renewal (TFR) on PSC track, comprising of Each Sleeper 25.98
renewal of Grooved Rubber Pads, Liners and ERCs
(excluding seized ERCs) without damaging PSC sleepers.
Scope includes cleaning rail seat on sleeper, ERC and eye of
Inserts with wire brushes and applying grease to eye of insert
and central leg of ERC with contractor's grease of Railway’s
specification, cleaning rail flange at liner seats, putting-back
liners in correct position & squaring of sleepers and sealing
liner edges with grease. [Rate includes lead upto 500m)
061150 Lubrication of Elastic Rail Clips on PSC sleepers with Each 2.75
contractor’s grease, conforming to Railway’s specifications,
labour etc. complete as per Para 1411 (5)(b) of IR P.Way
Manual
061160 Recoupment & replacement of missing / wornout fittings of
channel sleeper on Bridge with railway's fittings -
061161 Involving Rubber Pad Each Sleeper 48.17
061162 Not involving Rubber Pad Each Sleeper 24.13
4. Drilling and Cutting Works :
061170 Cutting / cropping of rail of 90R / 52Kg or lighter section – 72
UTS, manually and perfectly vertical with contractor’s labour,
hacksaw blade and tools & plants -
061171 On Cess Each 201.35
061172 In-situ situation Each 293.14
061180 Cutting / cropping of rail of 52Kg – 90 UTS, manually and
perfectly vertical with contractor’s labour, hacksaw blade and
tools & plants -
061181 On Cess Each 241.62
061190 Cutting / cropping of rail of 60Kg – 90 UTS, manually and
perfectly vertical with contractor’s labour, hacksaw blade and
tools & plants -
061191 On Cess Each 302.02
3 of 4
061193 Extra to item no. 061191 for cutting 110 UTS rail (30% of Each 90.61
relevant item rate)
061194 Extra to item no. 061192 for cutting 110 UTS rail (30% of Each 141.97
relevant item rate)
061200 Drilling of hole in rail of any section and any UTS, manually
with contractor's labours, tools & plants, consumables etc. for -
061201 (a) Hole of dia. 25mm and above Each 144.29

061202 (b) Hole of dia. below 25mm Each 105.34
061203 Chamfering of drilled hole with contractor’s tools, plants and Each 12.75
chamfering kit, as per RDSO’s specifications for all types of
rails
061210 Gas cutting of rail of various sections with contractor’s tools &
plants, as directed by engineer in-charge :
061211 (a) Rail section of 90R and below Each 85.92
061212 (b) Rail section of 52Kg and above Each 103.11
061220 Fixing of grip expansion bolts of 18mm / 22mm dia. with nuts Each 89.71
and MS clips / washers on PSC sleepers as per specifications
for fixing guard rails / check rails / trolley path including drilling
of required holes in sleepers with all fittings with contractor's
tools & plants, equipment, consumables with all lead, lifts etc.
complete, as directed by Engineer in-charge, excluding cost
of bolts, nuts, washers, clips etc.
061230 Stacking of glued joints in single layer for electrical testing, in Each 74.67
such a manner that glued joints - (a) shall not touch ground,
(b) shall not touch one another, (c) shall not touch any rail or
any metallic body, (d) shall not be water-logged from any side
and (e) end post shall not rest on supports of glued joint
5. Laying of Switch Expansion Joints (SEJs) :

061240 Insertion of IRS Switch Expansion Joint (SEJ) with PSC / Set 6476.80
Wooden special size sleepers, as per approved drawing
including fixing of special size bearing plate, rubber pad and
other sleeper / rail fittings. Work includes providing
temporary connection till the time welding of SEJ is done.
Sleepers shall be given initial packing to make track fit for 20
kmph speed.
061250 Insertion of improved SEJ with PSC / Wooden special size Set 8882.20
sleepers as per approved drawing including fixing of special
size bearing plate, rubber pad and other sleeper / rail fittings.
Work includes providing temporary connection till the time
welding of SEJ is done. Sleepers shall be given initial packing
to make track fit for 20 kmph speed.
061260 Renewal of existing SEJ (in running line & yard) on PSC / Set 4769.05
Woodensleepers with cutting of rails, as required and
lubrication, gauging & aligning rails, providing temporary
connection with adequate welding gap with adjoining rail and
ensuring proper track geometry for 30 kmph speed, as
directed by Engineer in-charge.
4 of 4
IR's Unified Standard Schedule of Rates - 2019 Chapter-7 : Turnouts and Renewal
CHAPTER - 7 : Turnouts And Renewal
1. Assembling Works :
071010 Assembling complete MG turnout etc. on staging or on
formation / ballast bed to correct gauge and alignment as per
standard drawing, duly leading all types of special size sleepers,
switches, crossings, fittings, fastenings etc. with maximum lead
of 250m & all lift and testing points with S&T staff for throw of
switch etc. at station yard complete and as directed by Engineer
in-Charge.
071011 (a) 1 in 8½ Turnout Set 22760.80
071012 (b) 1 in 12 Turnout Set 26967.50
071013 (c) 1 in 16 Turnout Set 30239.25
071014 (d) Diamond Crossing Set 34896.75
071015 (e) Derailing Switch Set 4631.05
071020 Assembling complete BG Turnout including symmetrical split on
staging or on formation / ballast bed to correct gauge and
alignment as per standard drawing on all types of rails over PSC
sleepers at specified locations, duly leading special size
sleepers, switches, crossings, fittings, fastenings etc. with
maximum lead of 250m & all lift and testing points with S&T staff
for throw of switch etc. at station yard after levelling surface
complete and as directed by engineer in-charge
071021 (a) 1 in 8½ Turnout Set 41956.60
071022 (b) 1 in 12 Turnout Set 46096.60
071023 (c) 1 in 16 Turnout Set 49201.60
071024 (d) 1 in 20 Turnout Set 56324.70
071025 (e) Diamond crossing Set 58516.60
071026 (f) Derailing switch Set 8711.25
2. Dismantling Works :
071030 Dismantling of existing BG turnouts and trap switches with all
types of rails on other than PSC sleeper layout, removing fish
plates & fastenings, leveling of ballast to correct profile &
stacking all the released materials, sleepers, fastenings, rails,
switches & crossings including segregating & stacking at
specified locations in a neat & countable manner, as directed by
Engineer in-charge :
Under Traffic Block Conditions -
071031 (a) 1 in 8½ Turnout Set 31552.90
071032 (b) 1 in 12 Turnout Set 36285.26
071033 (c) 1 in 16 Turnout Set 40839.26
071034 (d) 1 in 20 Turnout Set 45393.26
071035 (e) Diamond Crossing Set 47670.26
071036 (f) Derailing Switch Set 6509.69
Under Conditions not requiring Traffic Block -
071037 (a) 1 in 8½ Turnout Set 24549.05
071038 (b) 1 in 12 Turnout Set 27816.20
071039 (c) 1 in 16 Turnout Set 30921.20
071040 (d) 1 in 20 Turnout Set 34026.20
1 of 5
071043 Extra over Items 071031 to 071035 and 071037 to 071041 for Set 10948.58
PSC sleeper layout
071044 Extra over Items 071036 and 071042 for PSC sleeper layout Set 2886.79
071050 Removing & stacking all types of rails, crossing & fastenings of
existing turnout excluding switch portion during traffic block, laid
on any type of sleeper with contractor’s labour, tools, plants etc.
for -
071051 (a) 1 in 8½ Turnout Set 11815.10
071052 (b) 1 in 12 Turnout Set 15230.60
071053 (c) 1 in 16 Turnout Set 18646.10
071054 (d) 1 in 20 Turnout Set 20923.10
071060 Removing existing Wooden / ST sleepers of Turnouts excluding
switch portion, collecting all released sleepers, fittings etc. at
indicated place with contractor’s labour, tools & equipments etc.
complete. Work shall be carried out in stages under traffic
including supporting and maintaining track as directed by
Engineer in-charge for safe passage of trains at 20 kmph speed
for -
071061 (a) 1 in 8½ Turnout Set 16597.95
071062 (b) 1 in 12 Turnout Set 20737.95
071063 (c) 1 in 16 Turnout Set 26027.38
071064 (d) 1 in 20 Turnout Set 30568.15
071066 Extra over Items 071061 to 071065 for PSC sleeper layout Set 9136.18
071070 Dismantling, removing & dressing the area of existing switch
portion on Wooden / ST sleepers including removing rails,
sleepers, fastenings etc. during traffic block with all contractor’s
tools, plants, equipments etc. complete and as directed for -
071071 (a) 1 in 8½ Turnout Set 16369.10

071072 (b) 1 in 12 Turnout Set 18076.85
071073 (c) 1 in 16 Turnout Set 19784.60
071074 (d) 1 in 20 Turnout Set 22756.72
071075 (e) Derailing Switch Set 13019.38
071076 Extra over Items 071071 to 071075 for PSC sleeper layout Set 5024.90
071080 Dismantling of existing BG / Mixed Gauge Scissor Cross-Over in
yard on Wooden / Metal sleepers and leveling of ballast to
correct profile, leading sleepers, fittings, rails etc. to nearby
place including segregating & stacking the same in a neat &
countable manner within the lead of 250m & all lift, clear of
infringements, crossing of track, if any complete, as directed.
{One set means four sets of 1 in 8½ points & crossings and two
sets of each acute & obtuse crossings} :
071081 Under Traffic Block Conditions Set 88847.99
071082 Under Conditions not requiring Traffic Block Set 78998.10
071090 Dismantling of existing MG points and crossings / snag dead
ends / trap switches of any rail section on wooden / steel
sleepers layout, removing fish plates & fastenings, leveling of
ballast to correct profile including segregation & stacking of all
released materials at specified location in a countable manner
with contractor's vehicles, consumables, stores, labour etc.
complete, as directed by engineer in-charge for -
071091 (a) For 1 in 8½ Turnout Set 22479.05
071092 (b) For 1 in 12 Turnout Set 27654.05
2 of 5
071093 (c) For Snag Dead End Set 15234.05

071094 (d) For Derailing Switches Set 4285.48
071095 (e) For Diamond Crossing Set 51053.10
071096 (f) Extra to Item no. 071091 for working under Traffic Block Set 3371.86
(15% of relevant item rate)
071097 (g) Extra to Item no. 071092 for working under Traffic Block Set 4148.11
071098 (h) Extra to Item no. 071094 for working under Traffic Block Set 642.82
071099 (i) Extra to Item no. 071095 for working under Traffic Block (25% Set 12763.28
of relevant item rate)
3. Insertion & Linking Works :
071100 Insertion of concrete sleepers in Turnouts in lead and crossing
portions (excluding switch portion) as per standard drawing
under traffic; carrying out required ballasting with available
ballast, packing & supporting track and maintaining track
parameters, as directed by engineer in-charge for passing trains
safely at 20 kmph speed for -
071101 (a) 1 in 8½ Turnout Set 22753.90
071102 (b) 1 in 12 Turnout Set 27928.90
071103 (c) 1 in 16 Turnout Set 32068.90
071104 (d) 1 in 20 Turnout Set 36208.90
071110 Laying 52Kg / 60Kg rails during traffic block on existing PSC
Turnout, excluding switch portion, i.e. laying lead & crossing
portions including cutting, drilling etc. and fixing all components -
lead rails, crossing, check rail etc. alongwith re-spacing of
sleepers as per standard drawing and making turnout fit for safe
passage of traffic at 20 kmph speed for -
071111 (a) 1 in 8½ Turnout Set 19105.30
071112 (b) 1 in 12 Turnout Set 21560.66
071113 (c) 1 in 16 Turnout Set 23926.84
071114 (d) 1 in 20 Turnout Set 26382.21
071120 Assembling & insertion of all types of Switch Assembly on
Broad Gauge with 52Kg / 60Kg rails & PSC sleepers on
temporary staging, built with railway's sleepers, rails etc. at
indicated location including cutting, drilling, fixing of all
components, fittings etc. with housing of tongue rails as per
requirement of signaling etc. including preparation for operation
of traffic block & inserting Switch portion during traffic block by
removing all ballast, muck etc. upto required level, attending
track parameters including lifting, spreading of deficient ballast
from adjoining track, if required, packing etc. complete as
directed by engineer in-charge, so as to make track fit for 20
kmph speed for -
071121 (a) 1 in 8½ Turnouts Set 26754.75
071122 (b) 1 in 12 Turnouts Set 30427.05
071123 (c) 1 in 16 Turnouts Set 31597.45
071124 (d) 1 in 20 Turnouts Set 35044.30
3 of 5
071130 Insertion and linking with track, the already assembled BG PSC
turnout by slewing with the help of manual labour or by cranes
including crossing of one track in traffic block without any
damage to track components including preparing ballast bed
and providing one round of kutcha packing of ballast under
bottom of sleepers to make track fit for 20 kmph speed to
required alignment and longitudinal level, as directed by
engineer in-charge for -
071131 (a) 1 in 8½ Turnout Set 32434.60
071132 (b) 1 in 12 Turnout Set 36988.60
071133 (c) 1 in 16 Turnout Set 41046.72
071134 (d) 1 in 20 Turnout Set 44643.12
071140 Under Traffic block period - Laying / Insertion of already
assembled MG Turnout on staging, available alongside of track
manually including approach sleepers & connecting newly laid
points & crossing with approach track by making necessary
cutting & providing closures / cut rails as required and
subsequently renewing approach rails with suitable length of cut
rails, as required and fixing joints with fish plates, bolts, nuts
etc., providing kutcha packing, levelling, aligning, gauging,
ensuring proper housing of switch etc. to allow traffic with all
leads, lifts etc. complete and as directed by engineer in-charge
071141 (a) For 1 in 8½ Points & Crossing Set 28590.90

071142 (b) For 1 in 12 Points & Crossing Set 33842.55
071143 (c) For Diamond Crossing Set 39535.05
071144 (d) For Derailing Switch Set 5691.87
4. Lifting Works
071150 Lifting of points & crossing layouts on all types of sleepers upto
75mm or part thereof including approach and exit sleepers
including one round of packing, adjustment to sleeper spacing,
tightening of fittings and ramping out on either side at slope not
steeper than 1 in 1000 or as directed
{Note : Item will be paid only when lifting is 25mm or more}
071151 (a) For 1 in 8½ Points & Crossing Set 14187.55
071152 (b) For 1 in 12 Points & Crossing Set 16257.55
071153 (c) For 1 in 16 Points & Crossing Set 19937.55
071154 (d) For 1 in 20 Points & Crossing Set 23042.55
071155 (e) For Diamond Crossing Set 25112.55
071156 (f) For Derailing Switch Set 2927.33
071157 (g) Extra over item nos. 071151 to 071156 for additional lift Per 25mm 2070.00
beyond 75mm for every 25mm or part thereof upto 225mm Lift / Set
5. Casual Renewal Works :
071160 Casual renewal of sleepers in points and crossing portion of
Metal / Wooden layout, including taking out existing sleepers &
stacking and inserting new / serviceable sleepers with all fittings
including packing under new sleeper for -
071161 (a) Sleepers upto 3.5m length Each 367.50
071162 (b) Sleepers of more than 3.5m length Each 436.50
4 of 5
071170 Casual renewal of sleepers in points and crossing portion of

PSC layout, including taking out existing sleepers & stacking
and inserting new / serviceable sleepers with all fittings
including packing under new sleeper for -
071171 (a) Sleepers upto 3.5m length Each 471.00
071172 (b) Sleepers of more than 3.5m length Each 557.25
071180 Renewal of CMS Crossing complete with fittings & fastenings
including removal of existing crossing and stacking, as directed
by engineer in-charge (work also involves replacement of
wornout rubber pads, liners and ERC, if required) for -
071181 (a) 1 in 8½ Turnout Set 3410.58

071182 (b) 1 in 12 Turnout Set 3682.27
071183 (c) 1 in 16 Turnout Set 4255.83
071184 (d) 1 in 20 Turnout Set 4527.52
071190 Renewal of Tongue rails & Stock rails (straight or curved)
complete with fittings & fastenings, ensuring proper housing &
changing of stretcher bars, if required; but excluding sleepers.
Work also includes drilling of hole, if any required and fixing of
fish plates. Released rails shall be stacked at indicated place.
{Note : (1) In case when only one tongue & stock rail are
replaced, only 50% of the quantity shall be payable. (2) If only
one tongue rail is replaced, only 25% of the quantity of switch
assembly shall be payable} for -
071191 (a) 1 in 8½ Switch Assembly Set 8673.47
071192 (b) 1 in 12 Switch Assembly Set 10636.42
071193 (c) 1 in 16 Switch Assembly Set 12123.76
071194 (d) 1 in 20 Switch Assembly Set 13262.26
071200 Through Fitting Renewal (TFR) on PSC Trunouts, comprising of
renewal of Grooved Rubber Pads, Liners and ERCs (excluding
seized ERCs) without damaging PSC sleepers. Scope includes
cleaning Rail Seat on sleeper, ERC and Eye of Inserts with wire
brushes and applying grease to eye of Insert and Central Leg of
ERC with contractor's grease of Railway’s specification,
cleaning rail flange at liner seats, putting back liners in correct
position & spacing of sleepers and sealing liner edges with
grease {Rate includes lead upto 500m} for -
071201 (a) 1 in 8½ Turnout Set 4469.48
071202 (b) 1 in 12 Turnout Set 6035.97
071203 (c) 1 in 16 Turnout Set 6783.47
071204 (d) 1 in 20 Turnout Set 7471.63
5 of 5
IR's Unified Standard Schedule Of Rates - 2019 Chapter-8: Manual/ Mechanised screening Ballast Related Activities
CHAPTER - 8 : Manual / Mechanised Screening & Ballast Related

Activities
Item No. Description of Item Unit Rate (Rs)
1. Deep Screening Works :
081010 Deep screening of track in terms of Para-238 of Indian
Railways Permanent Way Manual in other than PSC
sleepers and screening of complete ballast section. It
includes opening of ballast, digging down to specified
depth below bottom of sleeper to provide formation
slope of 1:40 towards drain or any prescribed direction,
taking out caked ballast, muck etc. from entire ballast
section, putting back clean ballast as per required ballast
profile, throwing away screened muck arising out of
screening on toe of bank or on cess, if low or on spoil
banks above top of cutting (including throwing and
leveling, if required beyond minimum 5m from the edge
of cutting which are upto 3m deep or alternatively
carting it upto 50m for disposing it off beyond cutting or
platforms) as per direction of Engineer in-charge,
including cutting cess, if required for effective drainage
upto a distance of 3.5m from centre line of track on both
sides and including one round of kutcha packing with
screened ballast including attending to track parameter
to make track fit for 20 kmph speed. Necessary wooden
blocks shall be brought by the contractor.
{Note : Cess cutting beyond 3.5m from centre line of
track shall be paid extra as per relevant item for
earthwork}
For BG Track :
081011 (a) Depth of 150 mm below bottom of sleeper Track Metre 233.34
081012 (b) Depth of 200 mm below bottom of sleeper Track Metre 264.94
081013 (c) Depth of 250 mm below bottom of sleeper Track Metre 284.44
081014 (d) Depth of 300 mm below bottom of sleeper Track Metre 311.21
081015 Extra to item no. 081011 for deep screening of Turnout Track Metre 140.00
For MG Track :
1 of 5

081030 Deep screening of track in terms of Para-238 of Indian
Railways Permanent Way Manual on PSC sleepers and
screening of complete ballast section. It includes opening
of ballast, digging down to specified depth below bottom
of sleeper to provide formation slope of 1:40 towards
drain or any prescribed direction, taking out caked
ballast, muck etc. from entire ballast section, putting
back clean ballast as per required ballast profile,
throwing away screened muck arising out of screening
on toe of bank or on cess, if low or on spoil banks above
top of cutting (including throwing and leveling, if
required beyond minimum 5m from the edge of cutting
which are upto 3m deep or alternatively carting it upto
50m for disposing it off beyond cutting or platforms) as
per direction of Engineer in-charge, including cutting
cess, if required for effective drainage upto a distance of
3.5m from centre line of track on both sides and
including one round of kutcha packing with screened
ballast including attending to track parameters to make
track fit for 20 kmph speed. Necessary wooden blocks
shall be brought by the contractor. {Note : Cess cutting
beyond 3.5m from centre line of track shall be paid extra
as per relevant item for earthwork}
081033 (c) Depth of 250 mm below bottom of sleeper Track Metre 321.31
081034 (d) Depth of 300 mm below bottom of sleeper Track Metre 354.78
For MG Track :
081043 Extra to item nos. from 081011 to 081022 and from Track Metre 4.14
081031 to 081042 for disposal of muck at a distance / 50 metre
beyond 50m for every additional lead of 50 metres or Lead
part thereof upto 500 metres
081044 Extra to item nos. from 081011 to 081022 and from Track Metre 8.63
081031 to 081042 for disposal of muck for additional lift / 1 metre
of 1 metre or part thereof beyond 3 metre lift in case of Lift
disposal of muck from track in cutting
2 of 5

2. Spreading of Ballast :
081050 Running out / Putting of railway's stone ballast from
existing stacks available along alignment either on top of
cutting or on formation or at toe of bank by head leads
or by any other means and spreading to the required
profile with contractor's labour, tools & plants, as
directed by Engineer in-charge. {Payment shall be made
based on ballast stack measurement}
081051 (a) For lead upto 50m and lift up to 5m Cum 90.41
081052 (b) Extra to item no. 081051 for each additional lead of Cum / 50m 27.00
50m or part thereof when total lead exceeds 50m, but Lead
upto 250m
081053 (c) Extra to item no. 081051 for each additional lift of Cum / 2m 22.42
2m or part thereof when total lift exceeds 5m Lift
3. Lifting, Packing & Boxing Works :

081060 Lifting and packing for regrading the existing BG track to
required height / level in stages not exceeding 75mm or
part thereof at a time, providing permissible ramp for
the track, insertion of moorum / sand / stone ballast
uniformly under the existing track and placing the same
to safe approved gradient, gauge, cushion including
levelling and one round of through packing to allow train
movement at restricted speed of 30 kmph for a specified
length with all leads & lifts {Note : Lifting of track shall
be done in stages as per procedure laid down in Para
233 of IRPWM to get the proposed final level as per
approved working profile, as directed by engineer in-
charge} -
081061 (a) In PSC sleeper track Track Metre 137.77
081062 (b) In other than PSC sleeper track Track Metre 111.62
081063 (c) Extra for additional lift over 75mm for every 50mm Track Metre 20.70
lift or part thereof upto 275mm for item nos. 081061 / 50mm Lift
and 081062
081070 Lifting and packing for regrading the existing MG track to
required height / level in stages not exceeding 75mm or
part thereof at a time, providing permissible ramp for
the track, insertion of moorum / sand / stone ballast
uniformly under the existing track and placing the same
to safe approved gradient, gauge, cushion including
levelling and one round through packing to allow train
movement at restricted speed of 30 kmph for a specified
length with all leads & lifts {Note : Lifting of track shall
be done in stages as per procedure laid down in Para
233 of IRPWM to get the proposed final level as per
approved working profile, as directed by engineer in-
charge} -
081071 (a) In PSC sleeper track Track Metre 108.14
081072 (b) In other than PSC sleeper track Track Metre 93.29
3 of 5

081073 (c) Extra for additional lift over 75mm for every 50mm Track Metre 15.22
lift or part thereof upto 275mm for item nos. 081071 / 50mm Lift
and 081072
081080 Regrading the existing BG track by lowering upto Track Metre 150.18
required depth in stages, not exceeding 75mm in one
stage including one round of through packing and
making track fit for 30kmph speed at each stage of
lowering as per Para 234 of IRPWM and subsequent
picking up of sags / slacks and attending to
misalignment / cross level defects during train operation,
providing required ramp-in and ramp-out for safe
passage of trains, including cutting trenches across track
at every 30m interval to the required final formation
level complete, as directed by engineer in-charge
081090 Regrading of existing MG track by lowering upto the Track Metre 96.31
required depth in stages not exceeding 75mm or part
thereof under traffic condition and providing permissible
slopes as per IRPWM for the formation, including one
round of through packing with beaters & rammers to
attain safe approved gradient & gauge to allow train at
30 kmph speed
081100 Boxing of ballast as per profile mentioned in IR's LWR Track Metre 22.41
Manual including cess dressing on both sides of track
081110 Screening of rejected / old ballast stacks so as to Cum 236.69

remove all fines smaller than 20mm and neatly stacking
at slightly shifted location within lead of 50 metre with
minor dressing / leveling of ground, as directed by
engineer in-charge {measurement shall be on gross
quantity}
4. Loading & Unloading of Ballast :
081120 Leading and loading Railway's ballast, collected at yard / Cum 22.77
depot / mid-section into Railway's BOB / BKH / any
other type of open wagon, using JCB or any other
approved mechanised method with all ascents, descents,
taxes etc. with lead of 250m & all lifts complete as per
081130 Leading and loading Railway's Ballast collected at yard / Cum 110.91
depot / mid-section into Railway's covered wagon, using
any approved method with all ascents, descents, taxes
etc. with lead of 250m & all lifts complete, as per
081140 Leading and loading Railway's Sand collected at yard / Cum 110.50
depot / mid-section into Railway's covered wagon, using
any approved method with all ascents, descents, taxes
etc. with lead of 250m & all lifts complete, as per
4 of 5

081150 Unloading of ballast from Railway's Hopper Wagons and Cum 61.74
distributing the unloaded ballast uniformly over the track
{it also includes taking out jammed ballast}
081160 Unloading of Ballast from Railway's wagons other than Cum 98.12
Hopper wagons by opening the doors of boxes and
pulling & pushing down ballast with rake irons /
phowrahs and distributing unloaded ballast uniformly
over the track {it also includes taking out jammed
ballast}
081170 Unloading of sand / query dust from Railway's wagons Cum 87.46
other than Hopper wagons by opening the doors of
boxes and pulling & pushing down sand with rake irons /
phowrahs and distributing unloaded sand uniformly over
the track {it also includes taking out jammed sand}
081180 Spreading of unloaded sand / query dust from the Cum 82.20
Railway's wagons on top of cess uniformly in between
sleepers, i.e. in crib portion & on shoulders and clearing
sand on foot of rails manually under traffic condition
complete and as directed by Engineer in-charge
5 of 5
IR's Unified Standard Schedule of Rates - 2019 Chapter-9 : Welding Activities
CHAPTER - 9 : Welding Activities

1. Alumino Thermic Welding Works :
091010 Supplying Alumino Thermic (SKV) welding portions from RDSO
approved sources as per latest RDSO specifications for 25mm gap
welding of rail joints including all related consumables, e.g. pre-
fabricated dry mould, luting sand, closing pin, asbestos powder,
igniter, thimble, magnesite powder etc. -
091011 (a) For 60 Kg Rail, 3-piece Mould and Compressed Air Petrol Each 1536.40
heating technique
091012 (b) For 52 Kg - 90 UTS Rail, 3-piece Mould and Compressed Air Each 1283.40
Petrol heating technique
091013 (c) For 52 Kg - 72 UTS Rail, 3-piece Mould and Compressed Air Each 1168.40
091014 (d) For 52 Kg - 72 UTS Rail, 2-piece Mould and Air Petrol heating Each 1168.40
technique
091015 (e) For 90R Rail, 2-piece Mould and Air Petrol heating technique Each 1041.90
091016 (f) For 75R Rail, 2-piece Mould and Air Petrol heating technique Each 915.40
091020 25mm gap 'in-situ' welding and finishing of rail joints as per IR's AT
Welding Manual with RDSO approved welding portion and
competent welder, labour, tools, equipments complete during traffic
block {Item also includes painting & marking of welded joint, as
directed} -
heating technique
technique
Welding Manual under traffic block with Railway’s welding portion
under Railway’s supervision by contractor's competent welder and
other skilled labour, including consumables tools & equipments.
Item includes trimming & grinding by machines. Only welding portion
and related consumables, e.g. pre-fabricated dry mould, luting sand,
closing pin, asbestos powder, igniter, thimble and magnesite powder
will be supplied by Railways. All other tools, equipments etc.
including fuel for pre-heating will be arranged by contractor. Item
also includes painting & marking of welded joint, as directed by
engineer in-charge :
heating technique
technique
1 of 3

091040 25mm gap Cess Welding and finishing of rail joints as per IR's AT
competent welder, labour, tools, equipments complete. Item also
includes painting & marking of welded joint, as directed by engineer
in-charge :
heating technique
technique
091050 25mm gap Cess Welding and finishing of rail joints as per IR's AT
Welding Manual with Railway’s welding portion under Railway’s
supervision by contractor's competent welder and other skilled
labour including consumables, tools & equipments. Item includes
trimming & grinding by machines. Only welding portion and related
consumables, e.g. pre-fabricated dry mould, luting sand, closing pin,
asbestos powder, igniter, thimble and magnesite powder will be
supplied by Railways. All other tools, equipments etc. including fuel
for pre-heating will be arranged by contractor. Item also includes
painting & marking of welded joint, as directed by engineer in-
charge :
heating technique
technique
competent welder, labour, tools, equipments complete during traffic
block. Item also includes painting & marking of welded joint, as
directed by engineer in-charge for -
091061 (a) 52 Kg 90 UTS rail Each 6839.14
091062 (b) 60 Kg 90 UTS rail Each 7782.52
091070 Welding and finishing of rail joints connecting rail sections of 60kg
on one end and 52kg on other end as per IR's AT Welding Manual
by 50mm wide gap with contractor’s RDSO approved welding
portion and competent welder, labour, tools, equipments and all
materials
(Note : Item also includes painting & marking of welded joint, as
directed by engineer in-charge) for -
091071 (a) On Cess condition Each 3701.99
091072 (b) In-situ condition under traffic block Each 4813.48
2. Flash Butt Welding Works :
2 of 3

091080 Flash Butt Welding of 90 UTS rails, conforming to IR’s Manual for
Flash Butt Welding of Rail, using contractor’s self-propelled rail cum
road / Mobile FBW Plants, tools, equipments and consumables.
Item also includes painting and marking of welded joints, pre-
straightining & post-straightining of panels, as directed by engineer
in-charge for -
091081 (a) 52 Kg on Cess Each 2575.02
091082 (b) 60 Kg on Cess Each 2942.88
091083 (c) 52 Kg 'in-situ' under traffic block Each 3601.16
091084 (d) 60 Kg 'in-situ' under traffic block Each 4322.40
3 of 3
IR's Unified Standard Schedule of Rates -2019 Chapter-10 : Reconditioning of Points Crossings
CHAPTER - 10 : Reconditioning of Points & Crossings
1. Built-Up Crossing :
101010 In-situ re-conditioning of worn out 1:8½ built-up / fabricated
crossing on all types of rail sections under traffic by RDSO
approved agency, as prescribed in ‘IR's Reconditioning of
Points & Crossings Manual’ with RDSO approved electrodes
and suppliers, finishing & grinding within permissible tolerance
limit, as directed by engineer in-charge.
{Note : One obtuse crossing shall be considered equivalent to
two nos. of 1:8½ crossing for payment} :
101011 (a) Using H3 electrodes Each 3221.15
101012 (b) Using H3A electrodes Each 3911.15
101013 (c) Using H3B electrodes Each 4601.15
101014 (d) Using H3C electrodes Each 5291.15
101020 In-situ reconditioning of worn out 1:12 or flatter built-up /
fabricated crossing on all types of rail sections under traffic
condition by RDSO approved agency, as prescribed in ‘IR's
Reconditioning of Points & Crossings Manual’ with RDSO
approved electrodes and suppliers, finishing & grinding within
permissible tolerance limit, as directed by engineer in-charge :

2. CMS Crossing :
101030 Reconditioning of worn-out 1:8½ CMS (Cast Manganese Steel)
crossing on all types of rail sections on Cess or Depot by RDSO
approved agency, as prescribed in ‘IR's Reconditioning of
Points & Crossings Manual’ with RDSO approved electrodes
and suppliers, finishing & grinding within permissible tolerance
limit, as directed by engineer in-charge.
{Note : One obtuse crossing shall be considered equivalent to
two nos. of 1:8½ crossing for payment} :
101040 Reconditioning of worn out 1:12 or flatter CMS (Cast
Manganese Steel) crossing on all types of rail sections on Cess
or Depot, as prescribed in ‘IR's Reconditioning of Points &
Crossings Manual’ with RDSO approved electrodes and
suppliers, finishing & grinding within permissible tolerance limit,
as directed by engineer in-charge :
1 of 3
101050 Reconditioning of worn-out all types of CMS (Cast Manganese Each 26475.30
Steel) crossings on all types of rail sections 'in-situ' under traffic
conditions using RDSO approved Translanatic Robotic Welding
technology alongwith approved agency, finishing & grinding
within permissible tolerance limit, as directed by engineer in-
charge.
{Note : (1) One obtuse crossing shall be considered equivalent
to two nos. of crossing for payment. (2) Reconditioned crossing
shall give a service life of minimum 80 GMT. In case of pre-
mature reconditioning, it shall be done by the contractor free of
cost} :
3. Switches / Tongue Rails :
101060 In-situ reconditioning of worn out 1:8½ tongue rail (only one
tongue rail alongwith connected stock rail) of all rail sections
under traffic, as prescribed in ‘IR's Reconditioning of Points &
as directed by engineer in-charge
101070 In-situ reconditioning of worn out 1:12 or flatter tongue rail (only
one tongue rail alongwith connected stock rail) of all rail sections
under traffic, as prescribed in ‘IR's Reconditioning of Points &
101080 Reconditioning of worn out 1:8½ tongue rail (only one tongue
rail alongwith connected stock rail) of all rail sections on Cess
or Depot, as prescribed in ‘IR's Reconditioning of Points &
101090 Reconditioning of worn out 1:12 or flatter tongue rail (only one
tongue rail alongwith connected stock rail) of all rail sections on
Cess or Depot, as prescribed in ‘IR's Reconditioning of Points &
4. SEJ (Switch Expansion Joint), Weld And Rail :
2 of 3
101100 Re-conditioning of worn out all types of SEJs of all rail sections
to the standard profile as per RDSO drawing and prescribed in
‘IR's Reconditioning of Points & Crossings Manual’ including
grinding etc. complete.
{Note : Two stock rails + Two tongue rails will constitute one set
of SEJ} :
101101 (a) On Cess condition Set 4687.69
101102 (b) In-situ under traffic condition Set 5474.50
101110 Re-conditioning of cupped welded joints 'in-situ' under traffic Each 282.33
conditions as per RDSO’s guidelines for ‘IR's Reconditioning Of
Scabs, Wheel Burns Of Rail And Cupped AT Welded Joint’
101120 Re-conditioning of Wheel Burns / Scabs on rail under in-situ and Sq cm 8.47
traffic conditions as per RDSO’s guidelines for ‘Reconditioning
Of Scabs, Wheel Burns Of Rail And Cupped AT Welded Joint’
3 of 3
IR's Unified Standard Schedule of Rates - 2019 Chapter-11 : Formation Rehabilitation
CHAPTER - 11 : Formation & Rehabilitation
1. Earth-Work :
111010 Removing existing ballast neatly from shoulder, crib and below Track Metre 359.66
sleepers so as to completely expose formation top for formation
treatment / repairs and running out the same after completion of
formation treatment work including dressing as per IRPWM
standard profile
111020 Insertion & spreading of blanketing material, conforming to
RDSO’s specifications, uniformly under the existing BG track in
layers of maximum 75mm thickness at a time upto the proposed
formation level as per approved drawing by duly lifting the
existing track in stages under the running conditions,
consolidating every layer of blanketing material manually or
mechanically in stages from stacks collected on either side of
track and packing the track for safe running of trains at speed of
30 kmph, achieving desired track geometry, as directed by
engineer in-charge under - (Note : Supply of blanketing material
shall be paid separately)
111021 (a) Without Traffic Block condition Cum 1081.19
111022 (b) During Traffic Block condition Cum 1255.34
111030 Excavation and leading of excavated earth / muck / dismantled Cum 993.89
rubbish of CC masonry in foundation from platform in-between
running / adjacent to track and by manual or any other suitable
means or descent/ascend, crossing of single track, obstruction
of track, signal wires, OHE wires, passenger crowds or any
other obstructions etc.
111040 Dressing and levelling the formation top surface in cutting or Sqm 41.55
embankment, removing vegetation / shrubs / any debris, duly
making good the isolated undulations etc. of upto 300mm depth
with Railway’s blanketing material, disposal of surplus soil on
slopes by spreading uniformly, rolling formation top in between
or adjacent to running track with 10MT roller for 5 to 8 passes
including watering while rolling to obtain uniform desired
formation top, as directed by engineer in-charge
2. Soil Testing :
111050 Slope stability calculation for Railways Embankment / Cutting
more than 6 meters height based on soil materials & parameters
as per RDSO's latest standards and specifications, duly
conducting relevant lab test, e.g. cohesion and angle of internal
friction etc. and submitting report for approval duly showing the
cross-section dimensions for embankment / cutting :
111051 (a) Embankment Each Job 415.38

111052 (b) Cutting Each Job 496.00
3. Miscellaneous Works :
1 of 3
111060 Excavation in all types of soil for formation treatment below track
under speed restriction of 20 kmph upto specified depth & width
including making up the cess as per standard profile or
spreading earth on bank, if the same is not required for cess
making and leveling the excavated bed to slope of 1 in 40
towards cess. The rate also includes working during traffic block
for excavation, removal and insertion of Railway’s Aluminum
Alloy Girders or Rail Clusters on C.C. crib for making temporary
arrangement alongwith erection and removal of cribs, all
wooden packing required and loading, unloading, shifting
operations including carriage of girders etc. complete and
maintaining the track parameters, as directed by engineer in-
charge
111061 (a) With Railway’s Aluminum Alloy Girders Cum 2832.82
111062 (b) With Rail Clusters, fabricated by contractor with rails Cum 3534.16
supplied by Railways
111070 Spreading blanketing material from stacks by the side of track Cum 1149.14
and filling the same in 15cm thick layer in track, levelling,
watering, ramming with hand rammers upto the formation top
during formation treatment in running traffic condition at speed
restriction of 20 kmph
111071 (a) Extra to item no. 111070 for every 50 metres lead or part Cum / 50 51.75
thereof when the lead exceeds the initial 250 metres metre Lead
111072 (b) Extra to item no. 111070, for every 1 metres height / lift or Cum / 1 86.25
part thereof, when the lift exceeds initial 5 metres metre Lift
111080 Earthwork for repairing to cess by cutting or raising of existing Running 83.61
cess upto 4 metre from centre of track with Railway’s earth Metre
including cutting of earth, leading, benching, filling, dressing
including cutting of grass / shrubs / trees etc.; watering,
compaction by ramming and leveling of earth for required
longitudinal & cross-sectional profile, as directed
111090 Formation treatment with Biaxial Geogrid 30 kN/m (Polyester/ Sqm 246.85
Polypropylene) alongwith deep screening of ballast by BCM,
which includes manufacture, testing, supply of Geogrid which
should be made from virgin high density polypropylene of weight
320 gms/sqm with required UTS and aperture sizes of 35mm x
35mm or 45mm x 45mm or 55mm x 55mm square or (30mm to
40mm) x (60mm to 65mm) or (40mm to 50mm) x (60mm to
65mm) rectangular (as approved by engineer in-charge), by
making suitable arrangement to BCM for spreading Geo-grid
beneath sleepers during deep screening with all contractor's
men, material, transportation, crossing of track & cutting of roll
to required length for enabling to lay alongwith BCM and as
directed by Engineer in-charge at site
111100 Earth-work in embankment with contractor's own earth including Cum 250.13
royalty / taxes, excavation / loading into contractor's vehicle
other than black cotton soil for repairing of cess / formation /
level crossing, rain cuts etc. to make surface to the desired level
and slope to entire satisfaction of Engineer in-charge. Rate shall
include sectioning to profile, all lift, descends, ascends, crossing
of track / road / nallah etc. including breaking of clods etc. and
compaction by rollers / rammers / tamping rods etc.
2 of 3
111110 Excavation for widening of existing formation in cuttings in hard Cum 408.05
soils which require picks or crow bars for hacking including soils
containing stones or boulders of size under 0.03 cum without
infringing the nearby track, as directed by engineer-in-charge at
site including cutting of earth, loading, leading by contractor’s
vehicles, unloading at site, dumping on spoil bank by head loads
and utilising same excavated earth for widening of existing
formation in embankment as per standards, duly rolling
manually at 2:1 slope and levelling bank to the required profile
including watering and compaction with contractor's labour or
machanically operated rollers with all contractor's labour,
clearing of jungle, benching etc., tools, plants, vehicles etc.
complete with lead upto 1000m and all lifts including crossing of
track, wherever necessary
111120 Extra over item no. 11100 for earth-work for making cess on Cum 25.01
other side of the track (when no approaches available along
track or no road vehicles to work at site) by dumping
contractor's own earth other than black cotton soil, collected
along toe of bank of any height on to other side of track & side
slope of the existing bank by head load, duly crossing of tracks
with all contractor's materials, labour, tools, plant including
loading of earth in baskets, lifting, leading to the non-cess side
of bank including crossing of tracks & dumping etc. and as
directed by the Engineer in-charge
3 of 3
IR's Unified Standard Schedule of Rates -2019 Chapter-12 : Activities at Construction Sites
CHAPTER - 12 : Activities at Construction Sites
121010 Dismantling of existing MG track, gas cutting of rails into Track Metre 103.71
free rails of length, as directed; removing fish plates &
fastenings, levelling of ballast to correct profile, so as to
form a level bed for laying BG track including segregation
and stacking at specified location in countable manner
121020 Dismantling existing middle rail of 52Kg / 90R track, Track Metre 98.00
serving for MG track in Mixed Gauge track portion and
check rail (on inside of curved track) of 52Kg / 90R / 75R
rails duly removing fish plates and bolts including
removing chairs from sleepers, stacking released rails,
fittings & fastenings, as directed by engineer in-charge
121030 Dismantling & removing existing SEJ (Switch Expansion Set 7686.46
Joint) assembly during line block and its replacement with
plain track as of adjoining section with all fittings and
stacking the released materials, as directed and aligning
rails, providing temporary connection with adequate
welding gap with adjoining rail and ensuring proper track
geometry for 30 kmph speed
121040 Dismantling of existing rail / metal fencing, fixed adjoining MT 1255.42
running lines of track, duly excavating and levelling the
foundation by hand compaction, removing connections
and transporting the released material by suitable means
and stacking the same, as directed by engineer in-charge
121050 Removing, screening and salvaging ballast from track, Cum 390.79
duly digging / scarifying ballast by beaters / wire brushes,
leveling formation after salvaging ballast, separating muck
by screening the salvaged ballast with contractor's 20mm
size sieve, stacking of sieved ballast for measurement on
or outside the formation along track, disposing off muck at
specified locations under non-traffic conditions with all
ascents, descents, as directed by Engineer in-charge
121060 Dismantling existing sand humps in yards including brick
/ stone masonry on either sides of track, removing sand
and earth to the required level including clearing site and
stacking released materials clear of infringement,
complete and as directed for -
121061 (a) Broad Gauge Each 6942.55
121062 (b) Metre Gauge Each 5907.55
2. Barricading Works :
121070 Provision of barricading with contractor's bamboos / balli
vertical post of 75 to 100mm dia. planted at every 2m
interval, projecting at least 1.5m above ground level and
driven firmly (minimum 0.5m) inside ground and including
painting verticals & horizontals with red luminous paints /
strips at alternative bay on barricade. Barricades shall be
completely removed when no longer required by engineer
in-charge. (60% payment shall be made on provision of
barricading at work-site)
121071 (a) With 3 horizontal bamboo / balli members of minimum Running Metre 128.77
50mm dia. spaced equally
121072 (b) Joining with strong nylon rope in one cross and one Running Metre 81.39
horizontal pattern of minimum 5mm dia.
1 of 5
121080 Providing Rail Barricading with rails supplied by Railways MT 1310.31

with verticals provided at every 1.5m interval, height of
barricade being upto 1.5m above ground / termination
level and one row of horizontal rail, duly cutting rails and
drilling holes as required, assembling necessary
accessories to required length, including earthwork
excavation for foundation, fixing posts in cement concrete
base of size 0.45m x 0.45m x 0.60m and one coat of red
oxide painting of steel work (excavation and concrete
work will be paid separately)
3. Shifting & Pairing Works :
121090 Shifting & pairing of rails / panels unloaded alongside
existing running track to adjoining formation including
crossing of track, duly lifting & pushing rail / panel without
damaging it and taking all necessary precautions, so as
not to infringe the running track, as directed by Engineer
in-charge (crossing of first track shall also be paid)
121091 (a) For rails upto 13m length Running Metre / 27.80
Track crossing
121092 (b) For rails/panels of more than 13m and upto 40m Running Metre / 33.49
length Track crossing
121093 (c) For rails/panels of more than 40m length Running Metre / 42.15
Track crossing
4. Laying & Linking Works :
121100 Providing Centre Line / Rail Level Pegs on formation at an
interval of 30 metres on one side or at centre of proposed
/ existing track, as directed by engineer in-charge for
linking of new track / CTR / Deep Screening / Lifting /
Lowering works, duly embedding in formation including
marking with contractor's paint (rails & tie bar pegs of
suitable size will be supplied by Railways)
121101 (a) With Rail pegs Each 104.04
121102 (b) With Tie bar pegs Each 68.67
121103 (c) With contractor's hard wood pegs Each 94.58
121110 Installation of reference points for track centre line in main Each 74.69
and loop lines, in straight or curve portion, SRJ for
turnouts, heel of crossing (HOC), locations of derailing
switches, switch expansion joints etc. away from
formation on firm ground at known offset with 12mm dia
MS rod pegs, protected by surrounding concrete of size
15cm x 15cm x 15cm of nominal mix 1:3:6, as directed
121120 Compaction of ballast in layer, laid on new formation at all Track Metre 29.42
the locations with smooth wheeled power roller of 8-10
tonne capacity to sufficient number of passes to form
consolidated ballast bed of 100mm - 150mm thickness to
a width of 3.5m to 4.5m symmetrical to centre line of
proposed track, to suit finished formation to correct line &
level with all ascents & descents, as directed by Engineer
in-charge. {Note : (1) Rate is inclusive of (a) providing
ramp for taking roller to formation and removing the same
& making good formation after completion of work; (b)
redistribution & leveling of excess ballast while rolling to
obtain uniform plane cambered surface; (2) 1.6 times to
linear length of turnout shall be paid for work on turnout}
2 of 5
121130 Linking of BG track on prepared formation to correct

gauge & alignment with Railway's track materials
including spreading sleepers at specified spacing,
squaring, pairing & fixing rails to sleepers with all types of
rail fittings & fastenings including their lubrication as per
IRPWM standards. Rate is inclusive of kutcha packing to
make track fit for 20 kmph speed :
121131 (a) For sleeper density of 1660 sleepers per km Track Metre 216.63
121132 (b) For sleeper density of 1540 sleepers per km Track Metre 201.34
121140 Laying of BG new IRS SEJ (Switch Expansion Joint) on Set 5372.80
PSC / Wooden sleepers with cutting of rails, as required
and lubrication including gauging, aligning rails, providing
temporary connection with adequate welding gap with
adjoining rail and ensuring proper track geometry for 30
kmph speed
121150 Linking of BG track on prepared formation at Level Track Metre 570.92
Crossing locations with fixing of level crossing blocks,
plate screws, check rails, drilling of holes, as necessary to
correct gauge & alignment with Railway's track materials
make track fit for 20 kmph speed and also for anti-
corrosive painting of rails.
121160 Manual linking of BG track over bridges & its approaches
with rails / rail panels of any length and guard rails
including leading of Wooden / PSC sleepers and rails
from stacks available alongside the alignment to site of
work with fixing of all fittings, aligning & levelling correctly
to make track fit for normal sectional speed :
121161 (a) With other than PSC Sleeper Track Metre 340.08
121162 (b) With PSC Sleeper Track Metre 419.78
121170 Carrying out cut & connection to the existing PSC sleeper Each Cut Point 50068.70
track under line block to connect the same to newly linked
track which is laid by the side, duly carrying out cutting of
rails, insertion of additional PSC sleepers, if required,
providing fish plated joints including drilling of holes,
slewing required length of both tracks to prescribed
alignment, adjusting sleeper spacing, providing continuity
to track, spreading of ballast to provide cushion, shoulder
ballast to the track stretch, giving one round of packing to
make track fit for 20 kmph speed
121180 Shifting / Slewing the existing or newly assembled track
under line block to correct locations & alignment and
attending to one round kutcha packing during line block or
non-block period, as directed by Engineer in-charge
(i) PSC Sleepers -
121181 (a) Maximum Shifting / Slewing upto 1 metre Track Metre 227.59
121182 (b) Maximum Shifting / Slewing for more than 1 metre & Track Metre 286.15
upto 2 metres
(ii) Other than PSC Sleepers -
121183 (a) Maximum Shifting / Slewing upto 1 metre Track Metre 201.71
121184 (b) Maximum Shifting / Slewing for more than 1 metre & Track Metre 243.11
upto 2 metres
3 of 5
121190 Linking of Mixed Gauge track on prepared formation to

121200 Linking of Metre Gauge track on prepared formation to
121210 Manual linking of Metre Gauge track over bridges & its
approaches with rails / rail panels of any length alongwith
guard rails including leading of Wooden / PSC sleepers
and rails from stacks available alongside the alignment to
site of work with fixing of all fittings, aligning & levelling
correctly to make track fit for normal sectional speed :
121211 (a) With other than PSC Sleeper Track Metre 290.28
121212 (b) With PSC Sleeper Track Metre 354.04
121220 Assembling, laying and linking of Broad Gauge track over Track Metre 163.09
Inspection Pit, CC apron, RCC/CC Bed Blocks etc. to
correct level & alignment, fixing of all fittings with rails /
panels, aligning & leveling correctly, as directed by
engineer in-charge {Rate is inclusive of cutting rails,
drilling holes for fixing fish plates, fixing reference pillars,
lubrication of fittings & fastenings, as required}
121230 Extra over item 121220 when ACB Plates are also Track Metre 40.91
required to be fixed
121240 Fixing all types of free rails / rail panels over pit line for BG Track Metre 118.96
track with inserts, elastic rail clips, MS liners and grooved
rubber pads below rail to correct spacing, gauge,
alignment and level with above fittings & fastenings in
position, duly providing full complements of rail fittings.
Required nos. of inserts per bearing shall be fixed at the
time of concreting bed block over pit wall to correct
spacing, centre to centre, alignment & levels as per IR’s
approved drawing.
5. Miscellaneous Works :
121250 Construction of Sanded Dead End as per RDSO’s Each 9663.45
Drawing no. RT-347 (with all amendments) with brick-
work using country bricks or CC bricks in mud mortar and
filling with river coarse sand, surrounding rails and filling
around (Brick work & earth work will be paid separately)
121260 Working of the Railway Push Trolley by arranging
required semi-skilled manpower as per Railway's rules
and stipulations for conducting inspections by Railway
officials and as directed by Engineer in-charge :
121261 (a) For Full day Each 2379.35
121262 (b) For Half day (upto 6 hours) Each 1198.30
4 of 5
121270 Providing Caution Watchman at a rate of one caution

watchman per 8 hours shift with prescribed protection
equipments from contractor at location where caution
order is imposed; (Detonators, Banner Flags / HS Flags
will be supplied by Railways) watchman to be on
continuous vigil and exhibit necessary hand signals to the
trains for their passage over caution spot :
121271 (a) For One Shift Each 538.20
121272 (b) For Half Shift (upto 6 hours) Each 269.10
121280 Preparation & submission of completion drawings of yard,
showing all the details, such as circulating area, approach
road, platform shelter, platform, FOB etc. with computer,
showing relevant particulars to appropriate scale as per
IR's Engineering Code on approved quality, transparent
media as per details supplied by Railways, including
submission of check print for proof checking, duly
incorporating the suggested corrections and modifications
and supplying the final plot on approved quality &
transparent media with six copies of ammonia prints
complete and soft copy, as directed by Engineer in-
charge
{Note : (i) Drawings shall be prepared by using latest
drawing making softwares (AutoCad, Work station etc.)
and printing shall be done on high end latest plotters. (ii)
Stage Paymement - (a) For check print - 40% (b) For
Paper tracing - 40% (c) For Ammonia print & soft copy -
121281 (a) Completion drawing of yard at junction station Each 14392.25
121282 (b) Completion drawing of building Each 17853.75
121283 (c) Completion drawing of land plan Kilometer 7469.25
121284 (d) Completion drawing of way side station Each 4598.85
5 of 5
IR's Unified Standard Schedule of Rates -2019 Chapter-13 : Maintenance Activities
CHAPTER - 13 : Maintenance Activities

1. Through Packing Works :
131010 Through packing of track, as described in Para-224 of Indian
Railways Permanent Way Manual -
(a) For PSC sleeper Track (BG) :
131011 (i) For Sleeper Density of 1540 Sleepers/Km or more Track Metre 81.45
131012 (ii) For Sleeper Density of less than 1540 Sleepers/Km Track Metre 70.59
(b) For other than PSC Sleeper Track (BG) :
131013 (i) For Sleeper Density of 1540 Sleepers/Km (M+7) or more Track Metre 66.28
131014 (ii) For Sleeper Density of 1340 Sleepers/Km (M+4) Track Metre 57.44
(c) For PSC sleeper Track (MG) :
131015 (i) For Sleeper Density 1540 Sleepers/Km (M+7) or more Track Metre 61.09
131016 (ii) For Sleeper Density of 1340 Sleepers/Km (M+4) or less Track Metre 52.94
(d) For other than PSC Sleeper Track (MG) :
131017 (i) For Sleeper Density of (M+7) Track Metre 46.39
131018 (ii) For Sleeper Density of (M+4) or less Track Metre 39.68
131020 Picking up of slacks in track, as directed by Engineer in-charge
without damaging sleepers & fittings, duly opening up ballast,
gauging, alignment, correcting longitudinal & cross levels,
packing, boxing of ballast and dressing the same under traffic
conditions (as per Indian Railways Permanent Way Manual
Para-229) :
131021 (a) For PSC Sleeper (BG) Track Metre 69.82
131022 (b) For other than PSC Sleeper (BG) Track Metre 60.76
131023 (c) For PSC Sleeper (MG) Track Metre 61.09
131024 (d) For other than PSC Sleeper (MG) Track Metre 46.81
131030 First or Second Through Packing of track for all sleeper density
including giving a general lift, as desired to eliminate sag after
deep screening work, as described in Para-238 of Indian
Railways Permanent Way Manual {Notes : (1) Rate is for track
laid to 1540 sleepers/km density; (2) 10% extra to the rate shall
be paid in case of 1660 sleepers/km density; (3) Only 80% of
the rate shall be paid in case of 1340 sleepers/km density} -
131031 (a) For PSC Sleeper Track (BG) Track Metre 97.74
131032 (b) For other than PSC Sleeper Track (BG) Track Metre 81.01
131033 (c) For PSC Sleeper Track (MG) Track Metre 69.82
131034 (d) For other than PSC Sleeper Track (MG) Track Metre 57.99
131040 Third or subsequent Through Packing of track for all sleeper
density including picking of slacks, as required after second
through packing, subsequent to deep screening work, as
described in Para-238 of Indian Railways Permanent Way
Manual {Notes : (1) Rate is for track laid to 1540 sleepers/km
density; (2) 10% extra to the rate shall be paid in case of 1660
sleepers/km density; (3) Only 80% of the rate shall be paid in
case of 1340 sleepers/km density} -
131041 (a) For PSC Sleeper Track (BG) Track Metre 75.19
131042 (b) For other than PSC Sleeper Track (BG) Track Metre 64.81
131043 (c) For PSC Sleeper Track (MG) Track Metre 57.49
131044 (d) For other than PSC Sleeper Track (MG) Track Metre 48.84
1 of 9

131050 Through packing of Mixed Gauge track, as described in Para-
224 of Indian Railways Permanent Way Manual {Notes : (1)
Rate is for track laid to 1540 sleepers/km density; (2) 10% extra
to the rate shall be paid in case of 1660 sleepers/km density;
(3) Only 80% of the rate shall be paid in case of 1340
sleepers/km density} -
131051 (a) For PSC Sleeper Track Track Metre 88.68
131052 (b) For other than PSC Sleeper Track Track Metre 74.78
131060 First or Second Through Packing of Mixed Gauge Track for all
sleeper density including giving a general lift, as directed to
eliminate sag after deep screening work, as described in Para-
238 of Indian Railways Permanent Way Manual {Notes : (1)
Rate is for track laid to 1540 sleepers/km density; (2) 10% extra
to the rate shall be paid in case of 1660 sleepers/km density;
(3) Only 80% of the rate shall be paid in case of 1340
sleepers/km density} -
131070 Third or subsequent Through Packing of Mixed Gauge Track
for all sleeper density including picking of slacks, as required
after second through packing, subsequent to deep screening
work, as described in Para-238 of Indian Railways Permanent
Way Manual {Notes : (1) Rate is for track laid to 1540
sleepers/km density; (2) 10% extra to the rate shall be paid in
case of 1660 sleepers/km density; (3) Only 80% of the rate
shall be paid in case of 1340 sleepers/km density} -
131080 First and second through packing of points and crossing
including gauging, fittings recoupment, elimination of sag and to
the required alignment as per provisions of Indian Railways
Permanent Way Manual -
131081 (a) For 1 in 8½ PSC layout Per Set 14994.85
131082 (b) For 1 in 8½ other than PSC layout Per Set 13900.05
131083 (c) For 1 in 12 PSC layout Per Set 20463.10
131084 (d) For 1 in 12 other than PSC layout Per Set 18327.55
131085 (e) For 1 in 16 PSC layout Per Set 25188.45
131086 (f) For 1 in 8½ Derailing Switch Per Set 3961.18
131087 (g) For 1 in 12 Derailing Switch Per Set 4996.18
131090 Third or subsequent through packing of points and crossing
including gauging, fittings recoupment, elimination of sag and to
the required alignment as per provisions of Indian Railways
Permanent Way Manual -
131091 (a) For 1 in 8½ PSC layout Per Set 13108.28
131092 (b) For 1 in 8½ other than PSC layout Per Set 12006.58
131093 (c) For 1 in 12 PSC layout Per Set 16228.23
131094 (d) For 1 in 12 other than PSC layout Per Set 15111.58
131095 (e) For 1 in 16 PSC layout Per Set 19976.65
131096 (f) For 1 in 8½ Derailing Switch Per Set 3703.58
131097 (g) For 1 in 12 Derailing Switch Per Set 4738.58
2. Systematic Overhauling Works :
2 of 9

131100 Improving track drainage by Shallow Screening of existing
ballast under traffic as per Para 227 {2 (a) to (f)} of IRPWM and
Para 6.2-IV of LWR Manual, including removing the crib ballast
in 75mm to 100mm depth below bottom of sleeper and
complete shoulder ballast without breaking core under the
bottom of sleeper, to recover clean ballast by screening on wire
mesh and disposing off the muck including throwing & leveling,
if required beyond minimum 5m from the edge of cutting which
are upto 3m deep or alternatively carting it upto 50m for
disposing it off beyond cutting or platforms away from the track,
as directed by Engineer in-charge including cutting & making up
the cess and ensuring proper drainage slope and then re-
inserting cleaned ballast into track and compaction of shoulder
and crib ballast by wooden mallet and dressing / profiling ballast
as per railway specifications
(a) For PSC sleeper Track (BG) :
131101 (i) For Sleeper Density of 1540 sleepers/Km or more Track Metre 181.18
131102 (ii) For Sleeper Density less than 1540 sleepers/Km Track Metre 146.02
(b) For other than PSC sleeper Track (BG) :
131103 (i) For Sleeper Density of 1540 sleepers/Km or more (M+7) Track Metre 163.51
131104 (ii) For Sleeper Density of 1340 sleepers/Km (M+4) Track Metre 133.63
(c) For PSC sleeper Track (MG) :
131105 (i) For Sleeper Density of 1540 sleepers/Km or more (M+7) Track Metre 149.77
131106 (ii) For Sleeper Density of 1340 sleepers/Km (M+4) or less Track Metre 127.17
(d) For other than PSC sleeper Track (MG) :
131107 (i) For Sleeper Density of (M+7) Track Metre 138.77
131108 (ii) For Sleeper Density of (M+4) or less Track Metre 117.32
131109 Extra over Items 131101 to 131108 for working in yards Track Metre 34.57
131110 Systematic Overhauling (shallow screening) of fish plated /
welded joint track sleepers including 3 approach sleepers on
either sides upto 50mm below bottom of sleepers in crib &
shoulder, replacing rounded ballast, recouping deficient ballast
within 50m lead, replacement of wornout fittings supplied by
Railway, as directed as per Para-227 of Indian Railways
Permanent Way Manual :
131111 (a) For Broad Gauge track Each Joint 1202.67
131112 (b) For Metre Gauge track Each Joint 901.89
131120 Slack picking of joint sleepers and 3 approach sleepers on
either sides with replacement of fittings and giving required lift
to make up general track level, as directed :
3. Pulling Back & End Cropping Works :
131130 Pulling back of rails / panels on running track for creep
adjustment or other incidental activities and re-fixing anchors
and all other fittings, including squaring and slack picking of
displaced sleepers, as directed :
131131 (a) For rails of 13 metre length Running Metre 21.09
131132 (b) For rails from 13 metre & upto 40 metre length Running Metre 23.68
131133 (c) For rails more than 40 metre length Running Metre 26.27
3 of 9

131140 Pulling of single rail / welded rail panels to create a specified
gap under traffic block, including opening of fittings &
fastenings and re-fixing them on track after pulling of rail and
creating standard gap for welding :
131141 (a) For Rails more than 13m and upto 40m length Running Metre 28.71
131142 (b) For Rails more than 40m length Running Metre 36.64
131150 End cropping & pulling back of rails and adjustment of creep by
making joints square including cutting & drilling of rails to permit
trains after each line block and closing the gaps, duly providing
6.5 metre cut rails and connecting with fish plates & bolts etc.
as prescribed in Indian Railways Permanent Way Manual.
{Note : (1) The work will be done under traffic block condition,
(2) Welding of rail joints, if required, shall be paid separately}

131160 Providing temporary Buffer Rails of fish plated joints of 3 pairs, Set 8774.67
measuring 6.5m each, duly removing rails of the existing track
including cutting & drilling of rails as required for isolating
LWR/CWR on all types of track structure. Work will be done
under traffic block condition.
4. Re-Alignment of Curves :
131170 Slewing and realigning of curves on existing Broad Gauge track
under running traffic condition, as directed by Engineer in-
charge with contractor labour, tools & plants, as required with
general lift upto 25mm including one round of through packing,
loosening/tightening of P.Way fittings, if required and other
incidental works :
(a) Other than PSC Sleeper track -
131171 (i) Maximum slew upto 50mm Track Metre 83.96
131172 (ii) Maximum slew more than 50mm and upto 100mm Track Metre 99.34
131173 (iii) Maximum slew more than 100mm and upto 150mm Track Metre 110.35
131174 (iv) Maximum slew more than 150mm Track Metre 123.20
(b) PSC Sleeper track -
131180 Slewing and realigning of curves in existing Metre Gauge track
under running traffic conditions, as directed by Engineer in-
charge with contractor labour, tools and plants, as required with
general lift upto 25mm including one round of through packing,
loosening/tightening of P.Way fittings, if required and other
incidental works :
(a) Other than PSC Sleeper track -
(b) PSC Sleeper track -
4 of 9

5. Destressing Works :
131190 De-stressing of LWR/CWR with contractor's labours, tools &
equipments inclusive of all lead & lift. Activities include cutting
of LWR/CWR into convenient panels of specified length,
removal of ERCs, liners, greasing of ERCs and liner contact
area, lifting rails and keeping them on rollers provided at every
15 sleepers, working out elongation of rail ends depending on
prevailing site conditions, pulling rails with the help of Hydraulic
Tensor to achieve the desired elongation, cutting rails, as
required, removing rollers and placing rail in position, re-fixing
ERCs & liners and adjustment of gap at SEJs :
131191 (a) With Railway’s Hydraulic Rail tensor Track Metre 66.21
131192 (b) With Contractor’s Hydraulic Rail tensor Track Metre 68.31
131193 (c) Without Rail tensor Track Metre 60.00
131200 Extra for carrying out Through Fitting Renewal (TFR of ERC, Track Metre 12.58
GRSP, Liners) alongwith de-stressing
131210 Extra for works of RR / SR / FR / Destressing for Track Metre 84.93
Major/Important bridge, having total opening more than 40
metres
6. Renewal and Miscellaneous Works :
131220 Fixing Joggled Fish Plates with bolt / clamp (supplied by
Railway) in running track conditions at welds on rail, as directed
by engineer in-charge (drilling of holes in rail will be paid
separately) :
131221 With 2 bolts Set 103.20
131222 With 4 bolts Set 137.60
131223 With Clamps Set 150.54
131230 End cutting & grinding of Railway's Metal / GFN liner and
providing the same at joints with contractor's tools & plants,
labour, consumable etc. complete as directed :
131231 (a) GFN Liners Each 12.25
131232 (b) Metal Liners Each 25.43
131240 Providing wooden blocks at rail joints duly transporting Each Joint 125.03
Railway’s released wooden sleepers, cutting into blocks,
providing bearing plate with rail screw / dog spikes and doing
packing, if required, as directed under traffic conditions
131250 Removing the existing wooden blocks under each joint, duly Each Joint 53.99
removing fittings, transporting and handing over the wooden
blocks & fittings
131260 Maintenance of track on main line & loops, Points & crossings Per Day 12650.00
etc. including special attention to section for carrying out
various maintenance works listed in Indian Railways P.Way
Manual / Bridge Manual / LWR Manual for safe running of
goods and passenger trains with contractor's tools / labours etc.
complete, as directed by Engineer in-charge.
{Note : (1) Contractor shall arrange one gang at any point of
time comprising of minimum 20 labours with sufficient
experience in P.Way working and one P.Way Supervisor. (2) In
case, contractor provides less no. of Labour / Supervisor,
payment will be deducted @ 10% of the accepted rate per
person}
5 of 9

131270 Removing extra PSC sleepers, provided at fish plated joints Each Joint 719.24
and re-spacing shoulder sleepers to LWR spacing as per
IRPWM / LWR Manual, duly removing ballast upto 150mm
below bottom of sleepers, packing disturbed sleepers and
putting back ballast to normal profile including leading &
stacking released sleepers & fittings
131280 Lubrication of fish plated rail joints under traffic as per Para-241 Each Joint 100.24
of Indian Railways Permanent Way Manual with approved
lubricant and tools & plants supplied by contractor for all types
of rail sections
131290 Lubrication of ERCs and its liner contact area by removal of Per Sleeper 17.95
ERCs and Metal / GFN liners in rail panel, cleaning of rust /
scale of ERC, Metal / GFN liners & SGCI insert by using wire
brush, scrapper / sand emery paper etc., supply & provision of
anti-corrosive treatment by application of graphite grease, as
prescribed by Railway under side of liners & corresponding
area of rail foot & SGCI insert with ERCs and re-fixing the same
as per Para-1411(5) of Indian Railways Permanent Way
Manual.
131300 Scattered replacement of Grooved Rubber Pads on PSC / ST Each Rubber 15.57
sleepers, as directed by Engineer in-charge pad
131310 Removing seized ERC from SGCI inserts of existing track by Each ERC 36.70
using suitable approved chemicals and / or heavy duty extractor
and re-fixing it with lubrication of insert eye and ERC, as
directed by engineer in-charge (due care shall be taken to avoid
any damage to the sleeper)
131320 Lubrication of gauge face of rail on sharp curves, cross overs, Running Metre 4.06
points & crossings and turn-in curves with contractor's grease
graphite of approved quality
131330 Adjustment of gaps of joints for providing rail end nylon Each Joint 672.64
insulation piece, fixing planned fish plate with insulation
materials, fixing bolts with nylon bush tightening the same,
packing of joints to required level and alignment on running
track. All materials shall be supplied by Railway
131340 Interchanging gauge face of rails of any section in running track Track Metre 91.56
including removal of fittings and re-fixing the same after
changing of gauge face, cutting of rails, joining the rails with fish
plate & drilling holes, if required as per lengths, as directed by
engineer in-charge {cutting of rail & drilling of holes shall be
paid separately}
131350 Removing existing glued joints from running track under traffic Each Joint 3012.14
condition, duly cutting rails, inserting transported cut rails /
glued joints of required length by providing gap for carrying out
welding or joining rails with fish plates, duly drilling holes in cut
rail and approach rail, if required as directed by engineer in-
charge (drilling holes & rail cutting will be paid separately)
131360 Fixing of wooden distance pieces for platforms with contractor's

labour, tools and plants :
131361 (a) With Railway’s wooden block (by cutting Railway’s wooden Each 155.70
sleepers into blocks by sawing to size)
131362 (b) With Contractor’s hard wood block Each 975.57
6 of 9

131370 Casual renewal of tie bars of C.I. Plate sleepers including Each 71.78
carrying Tie Bars and stacking released ones including
adjustment of gauge & squaring of sleepers and fixing of new
cotters after splitting the same where necessary and packing of
sleepers
131380 Conversion of square holes of M.S. bearing plates into round Each 49.57
holes of specified diameter with contractor’s tools & plants
131390 Drilling holes of 16mm to 22mm dia. on PSC sleepers including Each 204.36
special layout sleepers and fixing the dowels with adhesive of
approved quality for fixing check rails & guard rails, as directed
by engineer in-charge
131400 Cleaning & clearing of side drains including disposing of muck Running Metre 25.16
beyond Railway boundary as per instructions of Engineer in-
charge to keep drains clean and clear in cuttings etc.
131410 Removal of all types of muck / malba and garbage which

includes waste material, animal carcass, cow dung, debris,
sweepings etc. from track and dumping / throwing, as directed
by engineer in-charge following all rules / regulations of State /
Central Govt. and Authorised Bodies :
131411 (a) In case payment is based on area cleaned Sqm 32.99
131412 (b) In case of payment on the basis of stack / truck / trolley Cum 629.11
measurement
131420 De-weeding, uprooting of weeds / jungle etc. and dressing Track Metre 29.61
including scarifying ballast in entire profile upto toe of ballast on
track
131430 Removing weeds & bushes in ballast section and cess upto Running Metre 11.10
3.5m from centre line of track in section & station yard, as
specified by Engineer in-charge including disposal of branches,
bushes outside cess/yard
131440 Trimming of tree branches coming within 4m of centre line of Per Tree 127.44
track & those obstructing views of LCs / Signal / Indicator at
locations in section & station yard, as specified by Engineer in-
charge including disposal of branches, bushes outside
cess/yard (Note : Girth of more than 30 cm will only be
considered as tree)
131450 General cess dressing upto 1m width from toe of ballast Running Metre 17.74
including scarifying toe ballast and making good the ballast toe
line, including vegetation uprooting
131460 Making kutcha trapezoidal side drain of bottom width as 300mm Running Metre 177.57
and depth of 450mm in cutting section by excavation in all types
of soil including utilising excavated muck for dressing of cess,
slopes etc. in Railway land
131470 Patrolling during cold / hot weather on track for protecting track
with all contractor’s labour, tools, plants etc. complete
131471 (a) For a maximum duration of 8 hrs. Per Person 555.45
131472 (b) For more than 8 hrs. and upto 12 hrs. duration Per Person 818.80
131480 Monsoon / Security Patrolling whenever required for protection
of track with all contractor’s labour, tools and plants etc.
complete and as directed by Engineer in-charge and as per
IRPWM (for a duration of 12 hours)
131481 (a) For Day shift Per Person 555.45
131482 (b) For Night shift Per Person 690.00
7. Marking and Painting Works :
7 of 9

131490 Painting of rail outside track on rail bottom, web, foot and Running Metre 50.44
fishing plane as per requirement with one coat of red oxide /
zinc chromate primer to IS : 2074 of reputed make including
surface preparation, i.e. cleaning with wire brush / sand paper
as a complete job
131500 Painting of rail on running track on rail, web, foot including liner Running Metre 47.15
contact area (excluding bottom of foot) and fishing plane as per
requirement with one coat of red oxide / zinc chromate primer to
IS : 2074 of reputed make including surface preparation, i.e.
cleaning with wire brush / sand paper as a complete job
131510 Anti-corrosive painting of rail outside track on rail bottom, web, Running Metre 124.97
foot and fishing plane as per requirement with two coats of
bituminous emulsion without mica (IP No. 56192 and RDSO
Specification No. IRS-P-30-1996) of reputed make including
surface preparation, i.e. cleaning with wire brush / sand paper
as a complete job as per Para 250 of Indian Railways
Permanent Way Manual
131520 Anti-corrosive painting of rail on running track on web, foot etc. Running Metre 107.59
including liner contact area (excluding bottom of foot) and
fishing plane as per requirement with two coats of bituminous
emulsion without mica (IP No. 56192 and RDSO Specification
No. IRS-P-30-1996) of reputed make including surface
preparation, i.e. cleaning with wire brush / sand paper as a
complete job as per Para 250 of Indian Railways Permanent
Way Manual
131530 Anti-corrosive painting of welds on track or on cess for all rail Each 13.97
sections with high build epoxy paint of reputed manufacturer,
conforming to RDSO's Specification no. M&C/PCN/123/2012
on welded area upto 10cm on either side including on the
underside of rail foot as per Railway's AT Weld Manual
including lettering / numbering, as directed
131540 Marking, inscribing, painting, writing, bordering etc. on new / old
iron surface at various locations of Points & Crossings with
details of turn-in / turn-out reference station mark on rail web for
one set, duly preparing surface with contractor's wire brush and
applying two coats of yellow synthetic enamel paint of approved
quality as background and stenciling the details to suitable size,
as described for every curve reference station mark / switch /
crossing details with black enamel paint of approved quality
complete, as directed :
131541 (a) 1 in 16 Turnout Set 1556.24
131542 (b) 1 in 12 Turnout Set 1038.83
131543 (c) 1 in 8½ Turnout Set 655.50
131544 (d) Derailing Switch Set 327.75
131550 Painting of P.Way Reference Post, Structures etc. with enamel
paint of approved make with different colurs & letters, as
directed by Engineer in-charge :
131551 (a) Kilometre & Gradient post Each 66.93
131552 (b) Hectometre Post Each 74.98
131553 (c) LWR / SEJ Board Each 113.97
131554 (d) Level Crossing Boards including Road Sign Boards Each 128.92
131555 (e) Level Crossing Post Each 130.02
131556 (f) Curve Post Each 74.71
8 of 9

131557 (g) Level Crossing Boom including fringe Metre 122.59
131558 (h) Level Crossing Boom without fringe Metre 97.87
131559 (i) Curve Board Each 113.97
131560 (j) Curve details, SE, Versine, Station Nos. etc. Each 38.78
131570 Painting of Bridge Reference / Boards, Structures etc. along
track with enamel paint of approved make with different colours
& letters, as directed by Engineer in-charge
131571 (a) Bridge Board Each 113.97
131572 (b) Bridge Tablet Each 33.33
131573 (c) Bridge Height Gauge Each 2106.23
131574 (d) HFL, FSL & DL on Bridge Pier / Abutment Each 519.42
131575 (e) Miscellaneous General Boards, Jurisdiction Boards, Sqm 191.28
Structures etc.
131580 Removing existing seized / corroded / broken rail screws in Each 240.06
PSC sleepers of points & crossings, duly drilling holes in
broken rail screws and removing existing rail screw pieces from
the holes alongwith existing dowels and fixing new contractor's
dowels (procured from RDSO approved sources) and grouting
around dowel with Epoxy materials and refixing new Railway's
rail screws duly greasing dowel portion with Railway's grease
with all contractor's materials, consumables, tools & plants,
labour with all lead, lift, crossing of track etc. complete and as
directed by the Engineer in-charge
9 of 9
IR's Unified Standard Schedule of Rates - 2019 Chapter-14 : Testing of Rails Other Components
CHAPTER - 14 : Testing Of Rails & Other Components
Item No. Description Unit Rate (Rs)
1. USFD Testing of Rails :

141010 Ultrasonic testing of single rails, required for fabrication of Each 308.37
points and crossings by using double crystal normal probe 4.0
MHz frequency with water / oil couplant. The rails shall be
tested by probing from the rail head top, rail head side and
web with typical oscillogram pattern for various probe
positions as per 'Indian Railways Standard Specification for
Ultrasonic Testing of Rails and Welds', as applicable to rails
for fabrication of points & crossings. The rates are inclusive of
contractor’s men, materials & machines complete and as
directed.
141020 Carrying out Through USFD testing of running rails & welds
(excluding flange testing) including the full head width portion
of SEJ, lead portion of points & crossings of all types of rails
using 0º (4 MHz) and 70º (2 MHz) central forward &
backward, 70º (2 MHz) gauge face corner forward &
backward and 70º (2 MHz) field forward & backward probes
by NBC (Need Based Concept) method under traffic
conditions as per provisions of IR’s "Manual & Specifications
for Ultrasonic Testing of Rails and Welds" & related
instructions, duly marking defects, submission of daily reports
and storing back-up data, as specified & directed. The rates
are inclusive of contractor’s men, materials & machines
complete unless otherwise specified and as directed :
141021 (a) With Contractor’s USFD machine Track 2833.03

Kilometer
141022 (b) With Railway's USFD machine including related T&P and Track 2603.03
probes Kilometer
2. USFD Testing of A.T.Welds :
141030 Carrying out USFD testing of Alumino Thermic (AT) welds on
all types of rails, using 0º (2 MHz) double crystal; 70º (2 MHz)
20mm x 20mm single crystal probe for head & flange testing;
2 nos. 45º (2 MHz) single crystal with tandom rig for testing
from rail top to bottom & for half moon testing and 70º (2
MHz) 20mm x 20mm side looking probe by NBC (Need
Based Concept) method under traffic conditions as per
provisions of IR’s "Manual & Specifications for Ultrasonic
Testing of Rails and Welds" & related instructions duly
marking the defects, submission of daily reports and storing
back-up data as specified & directed. The rates are inclusive
of contractor’s men, materials & machines complete unless
otherwise specified and directed :
(1) With Contractor’s USFD machine :
141031 (a) Track having upto 3 rail panels Each 99.15
141032 (b) Track having more than 3 rail panels Each 84.99
(2) With Railways’ USFD machine including related T&P and
probes :
3. USFD Testing of Flash Butt Weld :
1 of 2
IR's Unified Standard Schedule of Rates - 2019 Chapter-14 : Testing of Rails Other Components
141040 Carrying out USFD testing of Flash Butt (FB) & Gas Pressure
(GP) welds on all types of rails using 2 single crystal 45º (2
MHz) for head testing and one single crystal 70º (2 MHz)
probe for web & flange testing by NBC (Need Based
Concept) method under traffic conditions as per provisions of
IR’s "Manual & Specifications for Ultrasonic Testing of Rails
and Welds" & related instructions, duly marking the defects,
submission of daily reports and storing back-up data as
specified & directed. The rates are inclusive of contractor’s
men, materials & machines complete unless otherwise
specified and directed :
(1) With Contractor’s USFD machine :
(2) With Railway's USFD machine including related T&P and
probes :
4. USFD Testing of SEJ :
141050 USFD testing of Switch Expansion Joint (SEJ) by NBC (Need
Based Concept) method under traffic conditions as per
provisions of "IR’s Manual & Specifications for Ultrasonic
Testing of Rails and Welds" with latest amendments & related
instructions, duly marking the defects, submission of daily
reports and storing back-up data, as specified in the special
conditions, as applicable to rail testing. The rates are
inclusive of contractor’s men, materials & machines complete
unless otherwise specified and directed :
141051 (a) With Contractor’s USFD machine Set 622.61

141052 (b) With Railway's USFD machine including related T&P and Set 577.76
probes
2 of 2
IR's Unified Standard Schedule of Rates - 2019 Chapter-15 : Heavy Track Machines
CHAPTER - 15 : Heavy Track Machines

Description
Item. No. Unit Rate (Rs)
1. PQRS Related Works :

151010 Unloading of mono-block PSC sleepers in PQRS Depot using
crane from Railway wagons and stacking them at the end of
Assembling Line with all leads & lift. {(1) Unloading to be done
within the stipulated time as and when loaded BFRs are
received, so as to hand over empty BFRs without demurrage;
(2) If unloading is not done within the stipulated time, the
demurrage raised by the Railways shall be borne by the
Contractor} :
151011 (a) With Railway’s portal crane Each 3.20
151012 (b) With Contractor’s portal crane / mechanical means Each 4.58
151020 Assembling of 13m / 12.6m long track panels in PQRS Depot
by spreading PSC sleepers already unloaded and stacked, to
correct spacing as per specified sleeper density per km, using
portal crane, placing service rails on them and fixing rails to
sleepers with standard fastening properly to get correct gauge
with all contractor’s labour, tools, plants etc. -
151021 (a) With Railway’s portal crane Track Metre 19.48
151022 (b) With contractor’s portal crane Track Metre 23.90
151030 Loading pre-assembled panels of PSC sleepers in layers on
BFR with portal crane in PQRS Depot, complete in such a
manner that it may be dispatched in train formation to mid
section, as directed by engineer in-charge :
151031 (a) With Railway’s portal crane Track Metre 4.24
151032 (b) With contractor’s portal crane Track Metre 8.66
151040 During traffic block with Railway's portal crane : dismantling Track Metre 62.80
existing track of all types of rail, sleeper and density; loading
released panels on BFRs with portal cranes within stipulated
time; levelling disturbed and uneven surface of ballast upto
bottom of sleeper, (crib ballast to be pulled out in advance to
existing level in case of PSC sleeper track); placing new
panels from BFRs by Railway’s PQRS portals; linking track
with fish plates, bolts & nuts to a neat gauge of 1673mm
including pulling back extra ballast towards crib & shoulders
(after laying BG track with PSC sleepers) and regulating /
boxing with available ballast to allow traffic at restricted speed
of 20 kmph, complete with contractor’s labour, tools, plants
and with all lead & lift involved
151050 Unloading of released track panels consisting of all types of
rails & sleepers from Railway wagon at PQRS Depot, using
portal cranes including dismantling of released panels to rails,
sleepers & fastenings and stacking them material-wise and
classification-wise at nominated locations within the yard limits
with all leads, lift and crossing of tracks :
151051 (a) With Railway’s portal crane for PSC sleeper track Track Metre 33.94
151052 (b) With Railway’s portal crane for other than PSC sleeper Track Metre 25.45
track
151053 (c) With contractor’s portal crane for PSC sleeper track Track Metre 39.83
151054 (d) With contractor’s portal crane for other than PSC sleeper Track Metre 29.88
track
151060 Mechanical / Manual loading of all types of rails on BFRs in
PQRS Depot, as directed by engineer in-charge :
151061 (a) Mechanised loading with Railway's cranes Running Metre 7.54
151062 (b) Mechanised loading with contractor's cranes Running Metre 11.29
1 of 13
Description
151063 (c) Manual loading by contractor's labours Running Metre 22.21

151070 PQRS Cranes (One Set Of Two Portals) :
151071 Assisting the operator and maintenance engineers in their Per Day / Set 3150.37
duties of day-to-day machine maintenance for PQRS cranes
in Base Depot during maintenance or at site working. The
activities include :
(1) All gas cutting, welding works & oiling / greasing for
machine working & maintenance;
(2) Transportation of spares, batteries etc. from site store /
BFRs at Base Depot and at site during block / break-down
etc.;
(3) For unloading / loading machines from / to BFRs and
placing on auxiliary track;
(4) Assisting in replacement of spares on portal crane;
(5) Rendering assistance to machine staff, as directed by
machine in-charge
{Payment shall be made for the days which have not been pre-
notified as off-days}
151072 Doing various miscellaneous works for proper upkeep of crew Per Day 1041.90
rest van / rest room, as directed by the machine in-charge by :
(1) Fuelling the machine, duly bringing diesel / hydraulic oil
from the stacked drums;
(2) Bringing water to the staff rest van or staff rest room,
cleaning rest van / rest room, cooking food for Track Machine
staff or bringing food from outside {cost of food shall be borne
by the staff concerned}
151073 Guarding and watching the Track machine / group of Per 8 hr's Shift 516.64
machines, spare parts, oils, grease etc. during day and night
time, at all locations wherever necessary, as instructed by the
machine in-charge
2. Track Relaying Train (TRT) Related Works :
151080 Carrying out preparatory works before operation of Track Track Metre 13.85
Relaying Train (TRT), such as –
(1) Broken corroded sleepers to be removed and fastenings to
be loosened;
(2) Excess ballast to be removed and crib ballast between
consecutive sleepers removed upto bottom of sleepers;
(3) Check rails of level crossings falling in the range of work to
be removed;
(4) In case of CTR, rail panels placed at 1.5m away from
existing track centre;
(5) All existing longer wooden sleepers or interlaced sleepers
of different height to be removed;
(6) Cutting of existing rails to 6m piece closure at work site
from where Track Relaying Train (TRT) will start working on
that day;
(7) Removal of Reverse jaw type CST-9 sleeper (T-443),
joggled fish plates, OHE bonds & other obstructions etc.
151090 Loading of PSC sleepers in layers on BRH (special type
modified BFR for TRT / PQRS working) by using contractor’s
Gantry (Crane) in TRT / PQRS Base Depot, placing
B29dunnage (wooden beddings / wedges) between sleepers
to cover entire layer of sleepers, complete in such a manner
that it may be dispatched in train formation
151091 Mechanised loading with Railway's cranes Each 4.20
151092 Mechanised loading with Contractor's cranes Each 5.59
2 of 13
Description
151100 Welding, checking and strengthening of Rail Bridge Each 87.99

(connection from BRH to BRH over which TRT machine
gantry runs during block) and dowel pins
151110 Track Relaying Train (TRT) :
151111 Assisting the operator and maintenance engineers in their Per Day 6897.70
duties of day-to-day machine maintenance for TRT in Base
Depot or at site working. The activities include :
(1) All gas cutting & welding works and oiling / greasing for
BFRs at Base Depot during maintenance and at site during
block / break down etc.;
(3) Assistance in lowering of guidance sled on old track and
vibratory Plough & Compactor;
(4) Gripping existing & new rails by lifting and guidance frame;
(5 ) Guidance of alignment, positioning of rubber pads on rail
seat;
machine in-charge.
rest van / rest room, as directed by the machine in-charge by :
(1) Bringing water from nearby source for cleaning machine;
(2) Cleaning machine with water jet or any suitable means;
(3) Fuelling machine, duly bringing diesel / hydraulic oil from
the stacked drums;
(4) Bringing water to staff rest van or staff rest room, cleaning
rest van / rest room, cooking food for Track Machine staff or
bringing food from outside (cost of food shall be borne by the
staff concerned)
151120 Unloading of released sleepers from BRH (special type Each 6.83
modified BFR for TRT working) in Depot by using contractor’s
Gantry (Crane) and stacking them at nominated locations
within the yard limits with all leads & lift
3. T-28 Machine Related Works :
151130 Replacement of Turnout by dismantling the existing one,
removing and stacking all released materials, removing ballast
and muck by excavating upto required depth, preparation of
formation bed, laying of Turnout assembly by Railway's T-28
machine, linking of track with all fittings, filling up of ballast
duly screened; packing, adjusting, opening & housing of
switch; testing operation of switch assembly and attending
track parameters, so as to make track fit for 20 kmph speed
including disposing off muck to indicated places upto free lead
after the block working etc. complete for -
151131 (a) 1 in 8½ Turnout Each 47040.29

151132 (b) 1 in 12 Turnout Each 54875.70
151133 (c) 1 in 16 Turnout Each 61394.25
151134 (d) 1 in 20 Turnout Each 68351.75
3 of 13
Description
151140 Replacement of switch only of turnout by dismantling existing

switch, removing and stacking all released materials,
removing ballast and muck by excavating upto required depth,
preparation of formation bed, laying of pre-assembled switch
by Railway’s T-28 machine, linking of track with all fittings,
filling ballast duly screened, aligning, packing, adjusting,
opening & housing of switch, testing operation of switch
assembly and attending track parameters so as to make track
fit for 20 kmph speed including disposing off muck to indicated
places after the block working etc. complete for -
151141 (a) 1 in 8½ Switch Each 18140.10

151142 (b) 1 in 12 Switch Each 21049.60
151143 (c) 1 in 16 Switch Each 23583.40
151144 (d) Derailing Switch Each 11663.30
151150 T-28 Cranes (One Set of Two Portal Cranes) :
duties of day-to-day machine maintenance for Portal Cranes
(T-28) in Base Depot or at site working. The activities include
:
BFRs at Base Depot during maintenance and at site during
block / break down etc.;
(3) Unloading dip lorries (4 nos.) from BFRs, placement on
track and loading back the same on to BFRs / wagons after
work completion;
(4) Unloading machines / cranes at required location and
loading on to BFR;
(5) Placement of Railway’s wooden blocks underneath chains
in the way of movement of cranes or crossing tracks;
(6) Placement of 1m rail pieces underneath the crane wheels
for shifting of cranes inwards or outwards from its position;
(7) Loading / unloading Railway's wooden blocks into crane or
wagon;
(8) Assisting in replacement of spares on portal crane;
machine in-charge.
151152 Carrying out various miscellaneous works for proper upkeep Per Day 1041.90
of crew rest van / rest room, as directed by the machine in-
charge (T-28) for -
(1) Fuelling machine duly bringing diesel / hydraulic oil from
the drums stacked;
staff concerned)
4. BCM / FRM Machine Related Works :
4 of 13
Description
151160 Carrying out preparatory works for operation of Ballast Track Metre 11.75
Cleaning Machine (BCM) which includes making trench in
track for inserting cutter bar, supporting track on wooden
block supplied by Railway, removal of ballast alongwith muck
from shoulder which is out of reach of cutter chain and putting
the same in cutting width or between rails. Rate includes all
miscellaneous works, e.g. opening and re-fixing of joggled fish
plates, OHE Bonds, dismantling & removing obstructions etc.
151170 Opening and re-fixing of joggled fish plates, OHE Bonds,

dismantling and removing obstructions etc. required for BCM /
FRM or any other track machine, working in -
151171 (a) Electrified Territory Per Set 72.19
151172 (b) Non-electrified Territory Per Set 57.64
151180 Carrying out various works during operation of BCM, like filling Track Metre 58.57
up of ballast from available locations (including adjoining
tracks), required packing, attending track parameters etc.
complete so as to make track fit for 20 kmph speed
151190 Removal of screened muck discharged by BCM from cuttings, Running Metre 23.31
drains, platform etc. (including muck around OHE mast, signal
post etc.) and disposing it beyond 5m from edge of cutting
which are upto 3m deep or alternatively carting it upto 50m for
disposing it off beyond the length of cutting / platform and
making up cess wherever low using muck
151200 Removal of screened muck discharged by FRM / SBCM from Running Metre 15.54
cuttings, drains, platform etc. (including muck around OHE
mast, signal post etc.) and lifting it beyond 5m from edge of
cutting which are upto 3m deep or alternatively carting it upto
50m for disposing it off beyond length of cutting / platform and
making up cess wherever low, using muck
151201 Extra to item nos. from 151190 to 151200 for disposal of muck Running Metre / 2.07
at a distance beyond 50m for every additional lead of 50 50 metre Lead
metres or part thereof upto 500 metres
151202 Extra to item nos. from 151190 to 151200 for disposal of muck Running Metre / 4.31
for additional lift of 1 metre or part thereof beyond 3 metre lift 1 metre Lift
in case of disposal of muck from track in cutting
151210 Ballast equalisation & ballast profiling after completion of deep Track Metre 27.58
screening work by BCM and/or unloading of ballast by DMT
(Ballast Train), as directed by Site Engineer as per IRPWM
including heaping of ballast in tamping zone keeping rails &
sleeper top free from ballast, spacing and squaring of sleeper,
gauging, cleaning of muck, proper fixing of fastening, attention
during each round of sleeper tamping in relation to pre & post
working
151220 Making cess in deep screened track by using screened muck Track Metre 44.41
discharged by BCM where cess is low or cutting cess to
required depth upto 4m from centre of track, where cess is
high and disposing off extra muck beyond 5m from edge of
cutting which are upto 3m deep or alternatively carting it upto
50m for disposing it off beyond cutting or platforms, so as to
make cess as per standard profile including providing proper
slope
5 of 13
Description
151230 Carrying out packing of sleepers behind BCM including filling Track Metre 66.61
ballast when only lifting is carried out by BCM. Rate includes
attending track parameters with required manual packing, so
as to make track fit for 30 kmph speed
151240 Ballast Cleaning Machine (BCM) :
duties of day-to-day machine maintenance for BCM at stabling
station or at site of working. The activities include :
(1) Setting & disconnecting cutter bar;
(2) Carrying chain links to connect and disconnect chain;
(3) Cutting rail pegs and other obstructions by gas cutting;
(5) Transportation of spares, batteries, trough plates, chain
links etc. from site store/ BFRs at stabling station during
maintenance and at site during block / break down etc.;
(6) Assisting in replacement of spares on machine;
machine in-charge.
of crew rest van / rest room, as directed by machine in-charge
by (BCM) :
(1) Bringing water from nearby source and cleaning machine
with water jet or any suitable means;
(2) Fuelling machine, duly bringing diesel / hydraulic oil from
the stacked drums;
cleaning the rest van / rest room, cooking food for Track
Machine staff or bringing food from outside (cost of food shall
be borne by the staff concerned)
151250 Ballast Regulating Machine (BRM) :
(BRM) by :
the stacked drums;
bringing food from outside;
(4) Guarding & watching machines, spare parts, oils, grease
etc. during day and night time at all locations, wherever
necessary, as instructed by the machine in-charge;
(5) Cooking food for Track Machine staff or bringing food from
outside (cost of food shall be borne by the staff concerned)
151260 Shoulder Ballast Cleaning Machine (SBCM) :
6 of 13
Description
151261 Assisting operator and maintenance engineers in their duties Per Day 5809.80
of day-to-day machine maintenance for SBCM at stabling
(1) Setting & disconnecting cutter bar;
(2) Carrying chain links to connect and disconnect chain;
(3) Cutting rail pegs and other obstructions by gas cutting;
(5) Transportation of spares, batteries, trough plates, chain
links etc. from site store / BFRs at stabling station during
maintenance and at site during block / break down etc.;
machine in-charge
rest van / rest room, as directed by machine in-charge
(SBCM) by :
stacked drums;
cleaning the rest van / rest room, cooking the food for Track
Machine staff or bringing food from outside (cost of food shall
be borne by the staff concerned)
151263 Screening of ballast haunch, left out of FRM / SBCM reach Running Metre 56.03
and utilising screened ballast in track profile alongwith muck
for cess making or throwing away within 50m lead and 3m lift
when not required for cess repairs
151264 Making cess in deep screened track by using screened muck Track Metre 31.08
discharged by FRM where cess is low or cutting cess to
required depth upto 4m from centre of track, where cess is
high and disposing off extra muck beyond 5m from edge of
cutting which are upto 3m depth or alternatively carting it upto
50m for disposing it off beyond cutting or platforms so as to
make the cess as per standard profile including providing
proper slope
151270 CSM, Duomatic and 3X Sleeper Tamping Machines :
151271 Assisting operator and maintenance engineers in their duties Per Day per 4953.63
of day-to-day tamping machine maintenance at stabling machine
(1) Replacement, collection and transportation of tamping
tools from site to the machine / rest van;
(3) Transportation of tamping tools, spares, batteries etc.
from site store / BFRs at stabling station during maintenance
and at site during block / break down etc.;
machine in-charge
7 of 13
Description
151272 Doing various miscellaneous works for proper upkeep of crew Per Day per 1041.90
rest van / rest room, as directed by machine in-charge machine
(CSM/Duomatic/3X) by :
(1) Daily cleaning machine with water jet or any suitable
means;
stacked drums;
staff concerned)
5. CSM / DUO / 3X Machine Related Works :
151280 Carrying out pre-tamping, during tamping and post-tamping
work for tamping track with all types of rails, sleepers &
sleeper density by various Track Tamping machines, which
include :
(1) Re-adjustment of ballast, heaping-up of ballast, filling-up of
cavities in tamping zone by picking ballast from stacks /
shoulders / crib of adjoining track upto lead of 50 m to ensure
effective packing;
(2) Clearing of ballast on sleepers to make them visible to
operator,
(3) Clearing of ballast over rail foot to facilitate holding of rail
by rollers of TTM;
(4) Digging, screening and replenishment of ballast at mud
pumping / rounded ballast in sleeper crib location;
(5) Tightening of loose fittings immediately before & after
tamping;
(6) Replacement of broken / missing fittings supplied by
Railway;
(7) Correcting displaced sleepers to position alongwith
squaring;
(8) Re-setting of worked-out / fallen fittings;
(9) Removing and re-fixing joggled fish plates & wooden
blocks, wherever necessary;
(10) Manual consolidation of ballast in crib / shoulders;
(11) Neat boxing/dressing of ballast to standard profile -
151281 (a) For day time block working Track Metre 29.27
151282 (b) For night time block working Track Metre 35.28
151290 Pre, during & post tamping operations, as mentioned in Item
no. 151300 at level crossing portion alongwith opening the
road, removing and re-fixing of check rails & fittings, painting
of running rail & check rail, completing road surface to
motorable smooth condition after packing is over, as directed
for -
151291 (a) Level crossing with CC block surface Each LC 19535.40
151292 (b) Level crossing with asphalted surface Each LC 21812.40
151293 (c) Level crossing with moorum / earth surface Each LC 18396.90
151300 Dynamic Track Stabiliser (DGS)
8 of 13
Description
(DGS) by :
(1) Daily cleaning machine with water jet or any suitable
means;
stacked drums;
bringing food from outside (cost of food shall be borne by staff
concerned)
6. Unimat Machine Related Works :
151310 Carrying out pre-tamping, during tamping and post-tamping
works for tamping track with all types of rails, sleepers &
sleeper density by various Track Tamping machines, which
include :
(1) Re-adjustment of ballast, heaping-up of ballast, filling-up of
cavities in tamping zone by picking ballast from stacks /
shoulders / crib of adjoining track upto lead of 50 m to ensure
effective packing;
(2) Clearing of ballast on sleepers to make them visible to
operator;
(3) Clearing of ballast over rail foot to facilitate holding of rail
by rollers of TTM;
(4) Digging, screening and replenishment of ballast at mud
pumping / rounded ballast in sleeper crib location;
(5) Tightening of loose fittings including check rails
immediately before & after tamping;
(6) Replacement of broken / missing fittings supplied by
Railway;
(7) Correcting displaced sleepers to position alongwith
squaring;
(8) Re-setting worked-out / fallen fittings;
(9) Removing and re-fixing joggled fish plates & wooden
blocks, OHE bonds & other obstructions, wherever
necessary;
(10) Removing and re-fixing stretcher bar, as directed;
(11) Adjustment in opening and housing of switch for testing
operation of points for -
151311 (a) 1 in 8½ Turnouts Each Set 12447.60
151312 (b) 1 in 12 Turnouts Each Set 14218.60
151313 (c) 1 in 16 Turnouts Each Set 19029.40
151314 (d) 1 in 20 Turnouts Each Set 21306.40
151315 (e) Derailing Switch Each Set 8945.45
151316 (f) Extra to Item no. 151311 for night block working (15% of Each Set 1867.14
relevant item rate)
151317 (g) Extra to Item no. 151312 for night block working (15% of Each Set 2132.79
relevant item rate)
151318 (h) Extra to Item no. 151313 for night block working (15% of Each Set 2854.41
relevant item rate)
151319 (i) Extra to Item no. 151314 for night block working (15% of Each Set 3195.96
relevant item rate)
151320 (j) Extra to Item no. 151315 for night block working (15% of Each Set 1341.82
relevant item rate)
151330 UNIMAT (Points & Crossing Tamping Machine) :
9 of 13
Description
151331 Assisting the operator and maintenance engineers in their Per Day per 4612.65
duties of day-to-day Tamping Machine maintenance at machine
stabling station or at site of working. The activities include :
(1) Replacement, collection and transportation of tamping
tools from site to machine / rest van;
(3) Transportation of tamping tools, spares, batteries etc.
from site store / BFRs at stabling station during maintenance
and at site during block / break down etc.;
machine in-charge;
151332 Carrying out various miscellaneous works for proper upkeep Per Day per 1041.90
of crew rest van / rest room, as directed by machine in-charge machine
(Unimat) by :
(1) ) Daily cleaning machine with water jet or any suitable
means;
stacked drums;
bringing food from outside (cost of food shall be borne by staff
concerned)
7. Miscellaneous
151340 Laying of auxiliary track with all types of rails, already available Track Metre 58.08
on cess, fixing rails on wooden blocks / CST-9 pots at 2m
interval, true to square, to required alignment & level, fixing
with spikes / screws / keys, linking rails with fish plates, bolts &
nuts to a gauge of 3400mm (with reference to centre line of
existing BG track), levelling both the rails to same plane as
that of BG track over stone ballast by way of removing ballast
from shoulders of existing track, providing one proper packing.
Subsequently, dismantling auxiliary track after completion of
PQRS work at site by way of removing wooden blocks / CST-9
pots and carrying same to next stretch / location, if required,
where auxiliary track has to be laid and spreading the same at
required locations and leaving rails there itself for carrying out
TRR work later.
151350 Through rail renewal of BG track on PSC sleepers of any
density with all types of rails / rail panels lying in auxiliary track
or on cess or involving removal of fastenings, carting and
stacking released materials. It also includes fastening rails
taken from auxiliary track to sleepers to correct gauge with
fish plates, bolts & nuts to a neat gauge of 1673 mm including
handling of rails by way of dragging, pairing etc. and leading
released service rails to load into BFR / Lorry or to shift to next
location including crossing of track with lead & lift, as directed -
151351 (a) For rails upto 13m length Track Metre 88.23
151352 (b) For rails of more than 13m and upto 40m length Track Metre 82.70
151353 (c) For rails above 40m length Track Metre 83.35
10 of 13
Description
151360 Through Rail renewal with free service rails of all types by Track Metre 88.23
removing existing running rails, already cut into free rails / rail
panels for making auxiliary track, including attending
alignment, cross level, gauging, packing; wherever required
including crossing of track, as directed
151370 Reconditioning of worn out tamping tools of track machines Each 666.76
like CSM, Duomatic, Unimat, Tamping Express etc. by
approved welding electrode with contractor’s welding plant,
power, welder, labour etc. so as to bring the worn out tamping
tools to its original shape & size and to achieve minimum 5 km
of tamping with wear upto 20% of the original size of tool
151380 Reconditioning of worn out tamping tools of track machines; Each 1385.18
like CSM, Duomatic, Unimat, Tamping Express etc. using
special hard drawn / flux covered self shielded RDSO
approved electrodes for enhanced life cycle with contractor’s
welding plant, power, welder, labour etc. so as to bring the
worn out tamping tools to its original shape & size and to
achieve minimum 50 km of tamping with wear upto 20% of
original size of tool.
151390 Supply of Hydraulic Hose pipes of different diameter,
approved by SAE (Society of Automotive Engineers) or DIN
(Deutsches Institute for Norms) of different diameter, and also
as approved by Railway Engineer, suitable for fixing in Heavy
Track Machines
151391 (a) No. 4-SAE 100R2 with max. WP400 bar and minimum Metre 86.25
bursting pressure 1600 bar of running length
151392 (b) No. 6-SAE 100R2 with max. WP330 bar and minimum Metre 103.50
151393 (c) No. 8-SAE 100R2 with max. WP276 bar and minimum Metre 115.00
151394 (d) No. 10-SAE 100R2 with max. WP 250 bar and minimum Metre 156.40
151395 (e) No. 10-SAE 100R5 with max. WP 121 bar and minimum Metre 179.40
151396 (f) No. 12-SAE 100R2 with max. WP215 bar and minimum Metre 195.50
151397 (g) No. 12-SAE 100R9 with max. WP 250 bar and minimum Metre 230.00
151398 (h) No. 16-SAE 100R2 with max. WP165 BAR and minimum Metre 1069.50
bursting pressure 660BAR of running length
151399 (i) No. 20-SAE 100R2 with max. WP125 BAR and minimum Metre 1109.75
151400 (j) No. 24-SAE 100R5 with max. WP35 BAR and minimum Metre 460.00
151410 Supply of Chain Bolt, Plasser Part No. 61.04.212 (RDSO Each 59.80
specification No. TM/HM/6 /111 and RDSO Drawing No.
TM/9302 (Revised)
151420 Supply of T Head Bolt with Double Nuts & Spring Washer, Each 10.35
Plasser Part No. 61.04.218 for BCM
151430 Supply of CSK Bolts with double nuts of different sizes with
one spring washer of make TVS / UNBROKE for Track
Machines -
151431 (a) Part No. M 12mm x 60mm or 12mm x 65mm Each 24.73
151432 (b) Part No. M 16mm x 60 mm Each 47.15
151433 (c) Part No. M 16mm x 90mm Each 66.13
151434 (d) Part No. M 20mm x 60mm Each 140.30
11 of 13
Description
151435 (e) Part No. M 20mm x 90mm Each 180.55

151440 Supply of Hex Bolts with double nuts and one spring washer
of different sizes of make TVS / UNBROKE for Track
Machines -
151441 (a) Part No. M 8mm x 60mm Each 20.13
151442 (b) Part No. M 10mm x 60mm Each 23.00
151443 (c) Part No. M 12mm x 90mm Each 27.60
151444 (d) Part No. M 16mm x 60mm Each 47.15
151445 (e) Part No. M 24mm x 130mm Each 195.50
151450 Supply of Allen Bolts with double nuts of different sizes and
one spring washer of make TVS/UNBROKE for Track
Machines -
151451 (a) Part No. M 12mm x 80mm Each 40.25
151452 (b) Part No. M 16mm x 125mm Each 98.33
151460 Supply of Shell Amola-150 grade hydraulic oil or equivalent Litre 126.50
151470 Supply of engine oil CF4-15W40 or equivalent of HPCL / Litre 115.00
BPCL / IOCL
151480 Supply of hydraulic oil SS-68 or equivalent of HPCL / BPCL / Litre 104.65
IOCL
151490 Supply of Transmission oil SAE-30 or equivalent of HPCL / Litre 140.30
BPCL / IOCL
151500 Supply of Gear oil EP-90 or equivalent of HPCL / BPCL / IOCL Litre 160.43
151510 Supply of Grease MP-2 or equivalent of HPCL / BPCL / IOCL Kg 143.18
151520 Supply of Shell Alvania RL-2 Grease or equivalent Kg 425.50

151530 Supply of Fixing Pin (Plasser Part No. 8 x 40 DIN 1481), Make Each 4.14
Plasser or similar
151540 Supply of Lock washer (Plasser Part No. 64.08.2035), Make Each 15.64
Plasser or similar
151550 Supply of Round shaft chisel (Plasser Part No. 64.08.2034 Each 81.08
GEH), Make Plasser or similar
151560 Supply of U Clamp(Big) (Plasser Part No. 64.09.5248) Make Each 225.06
Plasser or similar
151570 Supply of Moon washer, suitable for BCM screens :
151571 (a) 12mm dia. hole size Each 129.95
151572 (b) 16mm dia. hole size Each 160.43
151573 (c) 18mm dia. hole size Each 200.10
151580 Providing lighting arrangements with halogen lamps on and
around machine during machine working in night time blocks,
with contractors own generator, consumables, all necessary
electrical fittings, operators etc. for -
151581 (a) BCM (7.5 kVA generator and 12x500 W) Per Night 2908.35
151582 (b) FRM (7.5 kVA generator and 12x500 W) Per Night 2908.35
151583 (c) CSM / DUO / 3X (5 kVA generator and 8x500 W) Per Night 2494.35
151584 (d) UNIMAT (7.5 kVA generator and 12x500 W) Per Night 2908.35
151585 (e) DGS (2.5 kVA generator and 4x500 W) Per Night 1601.38
151586 (f) BRM (5 kVA generator and 8x500 W) Per Night 2494.35
151590 Carrying out minor / routine welding works by contractor's
three phase welding plant and gas cutting etc. which are
required to the machine during day & night time with
contractor’s men, equipments & consumables in connection
with machine maintenance for -
151591 (a) BCM Per Day 1299.50
151592 (b) FRM / SBCM Per Day 1299.50
151593 (c) CSM / DUO / 3X / UNIMAT Per Day 1498.45
151594 (d) BRM Per Day 1328.25
12 of 13
Description
151600 Supplying and fixing wear resistant contact plate of various

thickness on BCM of IMPACTUDOUR or equivalent make as
per standard drawing of Plasser and as directed by site
engineer at BCM stabled station with contractor’s welding,
generator, electrodes, consumables, T&P etc. for -
151601 (a) 18mm thickness Sqm 13499.85
151602 (b) 20mm thickness Sqm 16489.85
151610 Supplying and fixing of corner roller complete Plasser Part no. Set 29909.20
64.06.5000.21. One set consists of following items –
(i) Corner roller 6664.08.5047 - 1 no.
(ii) Ring 64.08.5048 - 1 no.
(iii) Washer 64.08.05049 - 2 nos.
(iv) Bearing 20313MBC4 - 2 nos.
(v) Circlip 140.K.DIN.984 - 1 no.
(vi) Ring 6313AV - 2 nos.
151620 Providing lighting arrangement during night traffic block, to be Per Hour 148.70
availed as per instructions of engineer in-charge. Scope of
work includes contractor’s inflatable emergency tower light
two nos. of 400 watt, metal hallide lamp, 2.5 kVA petrol engine
of 3 hp each with two plugs for halogen each for provision of
light at work site. Maintenance of complete unit shall be with
contractor’s men, materials, equipments and consumables.
{Payment shall be made only for that day on the basis of
hours utilised when Railway’s site engineer actually puts up
his requirement. Also, standby arrangement shall be ensured
by contractor for any eventuality of failure}
151630 Providing lighting arrangements for about 100 meters length Per Hour 291.96
for block working during night time involving arranging 2.5 kVA
generator, 40 CFL / tube lights of 40 Watts (approx.) each
fixed to the bullies at required locations on both sides of track
including cost of consumables, such as diesel and engine oil
etc. with all contractor's labour, tools, plants, machinery,
electric wire, switches and connected materials etc. including
shifting of generators after each block, all lead and lift
complete and as directed by the Engineer in-charge
151640 Recording field data of Existing Track with theodolite / total Track Kilometer 1461.27
station for designed mode tamping by track tamping machine
13 of 13
IR's Unified Standard Schedule of Rates - 2019 Chapter-16 : Small Track Machines
CHAPTER - 16 : Small Track Machines

1. Rails :
161010 Quick cutting with abrasive rail cutter of all types of rail
sections including wear resistant, head hardened rails upto
110 UTS, with contractors tools & plants, equipment,
consumable with all lead & lift etc. complete as directed by
Engineer in-charge. Abrasive Rail Cutter will be as per RDSO
Specification No. TM/SM/1 (Rev. 01 of 2007) with latest
status of RDSO; Rail Cutting Wheel Abrasive Disc will be as
per RDSO Specification No. TM/SM/2 ( Rev. 01 of 2007) -
(i) Outside Track -

161011 (a) 60 Kg - 110 UTS Each 293.43
161012 (b) 60 Kg - 90 UTS Each 281.20
161013 (c) 52 Kg - 90 UTS Each 269.95
161014 (d) 52 Kg - 72 UTS & other rails Each 259.57
(ii) On Running Line -
161015 (a) 60 Kg - 110 UTS Each 330.65
161016 (b) 60 Kg - 90 UTS Each 316.87
161017 (c) 52 Kg - 90 UTS Each 304.20
161020 Drilling holes of 16 mm to 32 mm dia. with Rail Drilling
machine in all types of rail section with contractor's tools &
plants, equipment, consumable with all lead & lift etc.
complete, as directed by Engineer in-charge. Rail Drilling
Machine will be as per RDSO Specification No. TM/SM/3,
dated 24.04.1991 for -
161021 (a) Outside Track Each 47.72
161022 (b) On Running Line Each 76.25
161030 Cutting of rails with Rail Cutting Machine (Saw type) in all
types of rail sections with contractor's tools & plants,
equipment, consumable with all lead & lift etc. complete, as
directed by Engineer in-charge. Rail Cutting Machine (Saw
type) will be as per RDSO Specification No. TM/SM/4, dated
24.04.1991 for -
(i) Outside Track -
161031 (a) 60 Kg - 110 UTS Each 305.27
161032 (b) 60 Kg - 90 UTS Each 239.86
161033 (c) 52 Kg - 90 UTS Each 186.56
(ii) On Running Line -
161035 (a) 60 Kg - 110 UTS Each 430.36
161036 (b) 60 Kg - 90 UTS Each 387.32
161037 (c) 52 Kg - 90 UTS Each 270.09
161040 Bending & De-kinking with Hydraulic rail bender (Jim Crow)
heavy duty in all types of rail sections of flat bottom rails
maximum upto 40mm with contractor's tools & plants,
directed by Engineer in-charge. Hydraulic Rail Bender (Jim
Crow) Heavy duty will be as per RDSO Specification No.
TM/SM/5, dated 08.05.1991 for -
161041 (a) Outside Track Each 65.84
161042 (b) On Running Line Each 91.60
1 of 5

161050 Chamfering of drilled fish bolt holes in rails of any section and Each 12.75
any UTS with chamfering kit and with contractor's tools &
complete, as directed by Engineer in-charge. Chamfering Kit
will be as per RDSO's Specification No. TM-53 Rev. 01 of
2004
161060 Pulling of rail in LWR track by hydraulic rail tensor (Non- Each Gap 1210.26
infringing type) for maintaining specified gap at rail joints for
A.T. welding with contractor's tools & plant, equipment,
consumable with all lead & lift etc. complete, as directed by
Engineer in-charge. Hydrulic Rail Tensor (Non-infringing
type) will be as per RDSO's Specification No. TM/SM/32,
dated 20.12.1991
161070 Trimming of extra weld metal from rail top (top and sides) of Each 328.47
A.T. welded joint after welding operation by double action
weld trimmer with contractor's tools & plants, equipment,
consumable with all lead & lift etc. complete, as directed by
Engineer in-charge, Double Action Weld Trimmer will be as
per RDSO's Specification No. TM/SM/9, dated 16.08.1991
161080 Grinding A.T. welded joint after weld trimming operation is Each 99.50
completed by Rail Profile Weld Grinder with contractor's tools
& plants, equipment, consumable with all lead & lift etc.
complete, as directed by Engineer in-charge. Rail Profile
Weld Grinder will be as per RDSO Specification No.
TM/SM/10, dated 16.08.1991
161090 Cutting of rails with electrically operated Rail Cutting Machine
in all types of rail sections, with contractor's tools & plants,
directed by Engineer in-charge as per Specifications : {(i)
Prime mover : 1 hp 1440 rpm electric motor (ii) Time taken for
each cut - (a) for 90R rails : 10 to 12 minutes (b) for 52 kg rail
: 12 to 20 minutes (c) for 60 kg rail : 20 to 25 minutes (iii) Man
power required : 2 men; (iv) Weight of machine : 50 kg
approx (machine to comprise of cutting unit coupled with
driving electric to form a compact unit) (v) Clamping
arrangement : a sturdy fabricated device for firm grip of
different rail sections for automatic clamping in position for
ensuring a straight cut (vi) Handling & transportation :
Machine to be fitted with monorail wheel arrangement and a
handle of convenient height to enable it to be pushed over
one rail by one person to take it to the work-site} -
(i) When Electricity provided by static power supply :

161091 (a) Outside track Each 163.22
161092 (b) On Running track Each 248.73
(ii) When power supply by DG set :
2 of 5

161100 Drilling holes of 16 mm to 32 mm dia. with electrically
operated Rail Drilling Machine in all types of rail sections, with
contractor's tools & plants, equipment, consumable with all
lead & lift etc. complete, as directed by Engineer in-charge as
per Specification :
{(i) Manpower required : 2 Men. (ii) Weight of machine : 45kg.
approx. (iii) Handling & transportation : The machine to be
fitted with monorail wheel arrangement and a handle of
convenient height to enable it to be pushed over one rail by
one person to take it to the work site. (iv) Prime mover : 1 HP
1440 RPM Electric motor. (v) No. of holes normally be drilled
in a day : 60 holes} -
(i) When Electricity provided by static-power supply :
(ii) When power supply by DG set :
2. Sleepers :
161110 Extraction of jammed ERC by Heavy Duty Hydraulic Extractor Each 31.06
with contractor's tools & plants, equipment, consumable with
all lead & lift etc. complete, as directed by Engineer in-harge.
Heavy Duty Hydraulic Extractor for jammed ERCs (10 Ton
capacity) shall be as per RDSO's Specification No. TM/SM/6,
dated 8.05.1991
161120 Sleeper Spacing, Re-spacing / Squaring of sleeper by Each 52.48
Hydraulic Sleeper Sspacer with contractor's tools & plants,
directed by Engineer in-charge. Hydraulic Sleeper Spacer
shall be as per RDSO's Specification No. TM/SM/17, dated
31.03.1992
161130 Quick removal of damaged concrete sleepers and restoration Each 133.13
of railway track in case of accidents / derailments and other
such emergent situations by Concrete Sleeper Breaker &
angle grinder with contractor's tools & plants, equipments,
consumable etc. with all lead & lift complete, as directed by
Engineer in-charge. Concrete Sleeper Breaker will be as per
RDSO's Specification No. TM/SM/30, dated 26.10.1995
161140 Breaking of brick work, asphalt and rocks by Concrete Cum 1331.32
Sleeper Breaker with contractor's tools & plantS, equipments,
consumable etc. with all lead & lift complete, as directed by
Engineer in-charge. Concrete Sleeper Breaker shall be as
per RDSO's Specification No. TM/SM/30, dated 26.10.1995
3 of 5

161150 Drilling of holes (vertically) into concrete sleeper in-situ for Each 59.80
fixing guard rails and check rails on concrete sleeper track at
specified locations by concrete sleeper drilling machine with
contractor's tools & plants, equipment, consumable with all
lead & lift etc. complete, as directed by Engineer in-charge as
per RDSO's Specification : {(i) Machine shall be able to drill
hole in concrete sleeper from 16 mm to 22 mm dia. (ii) Action
of machine shall be fast enough to drill hole in minimum time,
i.e. it shall not take more than 10 minute for drilling hole of
dia. 22mm and depth 150mm. (iii) Machine shall be able to
drill hole of required size in-situ condition. (iv) In case of
electrically operated machine, operating voltage shall be 220-
250 V to enable it to operate with domestic supply of
electricity, single phase, A.C., 50 Hz or with single phase light
weight portable generator commonly available in the market,
(v) Weight of machine shall not exceed 10 kg for electrically
machine (without prime mover) and 50 kg for Diesel/Petrol
operated machine (including prime mover) (vi) Machine shall
be either non-infringing type or capable of being removed
within 30 seconds to the face of approaching train.}
3. Fittings :
161160 Measuring of Toe Load of ERC during service in field by Toe Each 3.03
Load Measuring Device (Mechanical) with contractor's tools &
complete, as directed by Engineer in-charge. Toe Load
Measuring Device (Mechanical) will be as per RDSO's
Specification No. TM/SM/14 (Rev. 01 of 2005 with all
updation)
161170 Measuring of Toe Load of ERC during service in field by Each 3.38
Electronic Toe Load Measuring Device with contractor's tools
& plants, equipment, consumable with all lead & lift etc.
complete, as directed by Engineer in-charge. Electronic Toe
Load Measuring Device will be as per RDSO's Specification
No.TM/SM/ETLMD/218 (Rev. 01 of 2003 with all updation)
161180 Carrying the rails / rail panels, concrete sleepers (using the
attachments) at site of work for 300 metres lead by Insulated
rail dolly with contractors tools and plant, equipment,
consumable with all lead and lift etc. complete as directed by
Engineer-in-charge as per Specifications :
{(i) Tubular frame : made of mild steel heavy duty pipe. (ii)
Chain : alloy steel chain conforming to IS : 10131/82 grade l
or (3) of 12 mm size of rail handling (iii) Attachment for
concrete sleeper : the chain sling conforms to IS : 2760/80,
having lifting link & grippers assembly:
161181 (a) Sleeper Each 39.43
161182 (b) Rail Each 402.62
4. Miscellaneous :
4 of 5

161190 Loading / unloading of concrete sleepers from cess to BFR / Each 23.68
BRH wagons and vice-versa by jib crane attachable to BFR /
BRH for handling concrete sleepers with contractor's tools &
complete, as directed by Engineer in-charge as per RDSO's
Specifications : {(i) Safe working capacity : 500 kg. (ii) Swing:
360 degree. (iii) Swing Radius (Minimum) : 1350 mm. (iv)
Efforts at full load : 20 kg. (v) Design, fabrication and erection
of jib crane alongwith its base frame shall be such that it
takes minimum assembly and attachment time to BFR / BRH.
Assembly and erection over and removal from BFR / BRH
shall not take more than 30 minutes. (vi) Design &
construction of jib crane with its assemblies shall be such
that it allows loading / unloading of concrete sleepers from
BFR / BRH in 4 layers. (vii) Loading / unloading time for a
concrete sleeper from BFR to cess and vice versa shall not
be more than 5 minutes}
161200 Tamping of track for picking up slacks in concrete sleeper Each 32.15
track by Hand Held Off Track Tamper (Power Pack Version)
with contractor's tools & plants, equipment, consumable with
all lead & lift etc. complete, as directed by Engineer in-
charge. Off-track tamper (Power Pack Version) will be as per
RDSO Specification No. TM/SM/OTT/320, dated 28.01.2009
5 of 5
IR's Unified Standard Schedule of Rates - 2019 Chapter-17 : Handling 0f Materials
CHAPTER - 17 : Handling of Materials

1. Rails :
171010 Loading of rails, SEJ, Glued joint etc. of any section and
length upto 14 metres in Wagons / Truck / Trailor including
lead upto 50 metres and lift upto 5 metres -
171011 (a) In wagons during period of traffic block MT 532.34
171012 (b) In wagons in yards not involving traffic block or on lines, MT 209.77
not opened to traffic
171013 (c) In Truck / Trailor MT 109.15
171020 Loading of rails of any section and length from 14 metre to 40
metre, in wagons including lead upto 50 metre and lift upto 5
metre -
171030 Loading of tongue rail, stock rail, switch assembly and
crossings of any section and length with / without P.way
fittings and fastenings, in Wagon / Truck / Trailor including
lead upto 250 metre and lift upto 5 metre -
171040 Loading, unloading and hauling of 52Kg / 60Kg rail upto 13 MT 639.81
metre length by Railway's rail dolly to the nominated location
under traffic in case road carriage is not possible with lead
upto 250 metre and all lift upto 5 metre during block period
171041 Extra to Item no. 171040 for lead beyond 250 metre and up to MT 221.79
1 Km
171042 Extra to Items no. 171040 & 171041 for lead beyond 1 Km for MT / KM 44.36
every subsequent Km or part thereof and upto 10 Km
171043 Extra to Item no. 171040 with contractor's Rail Dolly MT 42.71
171050 Loading, unloading and hauling of 52Kg / 60Kg rail more than MT 634.86
13 metre and upto 40 metre length by Railway's rail dolly to
the nominated location under traffic in case road carriage is
not possible with lead upto 250 metre and lift upto 5 metre
during block period
171051 Extra to Item no. 171050 for lead beyond 250 metre and up to MT / KM 272.37
1 Km
171060 Loading, unloading and hauling of 52Kg / 60Kg rail upto 13 MT 574.54
metre length by Railway's Dip Lorry to the nominated
location under traffic in case road carriage is not possible with
lead upto 250 metre and all lift upto 5 metre during block
period
1 Km
171063 Extra to Item no. 171060 with contractor's Dip Lorry MT 21.95
1 of 7

171070 Loading, unloading and hauling of 52Kg / 60Kg rail more than MT 571.33
13 metre and upto 40 metre length by Railway's Dip Lorry to
the nominated location under traffic in case road carriage is
not possible with lead upto 250 metre and lift upto 5 metre
during block period
1 Km
171080 Unloading of rails of any section and length upto 14 metre, in
neat manner for Railway usage from departmental material
train (DMT) or contractor's / Railway's Truck/Trailor including
lead upto 250 metre and lift upto 5 metre -
171081 (a) During period of traffic block MT 39.69
171082 (b) In yards, not involving traffic block or in lines, not opened MT 15.33
to traffic
171083 (c) From Truck / Trailor MT 35.63
171090 Unloading of rails of any section and length from 14 metre to
40 metre, in neat manner for Railway usage from
departmental material train (DMT) or contractor's / Railway's
Truck/Trailor including lead upto 250 metre and lift upto 5
metre -
171092 (b) In yards, not involving traffic block or in lines, not opened MT 18.84
to traffic
171100 Unloading of all type of rails of length 130 metre and beyond
from end unloading rake -
171102 (b) For unloading in yards, not involving traffic block or in MT 32.62
lines, not opened to traffic
171110 Crossing of rail panel unloaded on other side of the existing
track to double line side under running traffic conditions in
between trains under available line block and keeping rails
without any infringement to running track -
171111 (a) Rails upto and including 13 m length Running Metre 30.45
171112 (b) Rails more than 13 m and upto 40 m length Running Metre 35.62
171113 (c) Rails more than 40 m length Running Metre 45.51
171120 Loading of Wooden / Metal sleepers including existing fittings
and fastenings in Depot / Station / Mid-section between
stations in a neat manner to departmental material train
(DMT) or contractor's / Railway's Truck/Trailer with crane or
any other means including crossing of one track with free
lead upto 250 metre and lift upto 5 metre, if required with
contractor's labour, tools & plants, machinery, consumables
etc. -
171122 (b) In wagons in yards, not involving traffic block or in tracks, MT 239.46
171123 (c) In Truck / Trailer MT 202.50
2. Sleepers :
2 of 7

171130 Loading of 52kg / 60kg PSC line and special sleepers upto
2.7 metre length including existing fittings and fastenings in
Depot / Station / Mid-section between stations in a neat
manner to departmental material train (DMT) or contractor's /
Railway's Truck/Trailer with crane or any other means
including crossing of one track with free lead upto 250 metre
and lift upto 5 metre, if required with contractor's labour, tools
& plants, machinery, consumables etc. -
171140 Loading of 52kg / 60kg PSC line and special sleepers beyond
2.7 metre length including existing fittings and fastenings in
Depot / Station / Mid-section between stations in a neat
manner to departmental material train (DMT) or contractor's /
Railway's Truck/Trailor with crane or any other means
including crossing of one track with free lead upto 250 metre
and lift upto 5 metre, if required with contractor's labour, tools
& plants, machinery, consumables etc. -

171150 Loading, unloading and hauling of Wooden / Steel / CI MT 396.12
Sleeper by Railway's rail dolly to the nominated location
upto 250 metre and all lift upto 5 metre during block period -
1 Km
171160 Loading, unloading and hauling of PSC Sleepers of 52Kg / MT 440.13
60Kg by Railway's rail dolly to the nominated location under
traffic in case road carriage is not possible with lead upto 250
metre and all lift upto 5 metre during block period -
1 Km
171170 Loading, unloading and hauling of Wooden / Steel / CI MT 313.40
Sleeper by Railway's Dip Lorry to the nominated location
upto 250 metre and all lift upto 5 metre during block period -
1 Km
171180 Loading, unloading and hauling of PSC Sleepers of 52Kg / MT 376.08
60Kg by Railway's Dip Lorry to the nominated location under
traffic in case road carriage is not possible with lead upto 250
metre and all lift upto 5 metre during block period -
3 of 7

1 Km
171183 Extra to Item no. 171180 with contractor's Dip Lorry MT / KM 24.15
171190 Leading Wooden / Steel / CI sleepers by road vehicles with
contractor's vehicle, crane, crew, consumables, labour, tools
& plants etc. excluding loading / unloading, to destination with
all contractor's labour, tools/plants -
171191 (a) Lead upto 10 Km MT 178.79
171192 (b) Extra to Item no. 171191 for additional lead over 10 Km MT / 5 KM 21.58
for every 5 Km lead or part thereof upto 100 Kms
171193 (c) Extra to Items no. 171191 & 171192 for additional lead MT / 5 KM 11.63
beyond 100 Km for every 5 Km or part thereof upto 400 Kms
171194 (d) Extra to Items no. 171191, 171192 & 171193 for MT / 5 KM 7.73
additional lead beyond 400 Km for every 5 Km or part thereof
upto 1000 Kms
171200 Leading all types of PSC sleepers of upto 2.7 metre length by
road vehicles with contractor's vehicle, crane, crew,
consumables, labour, tools & plants etc. excluding loading /
unloading, to destination with all contractor's labour,
tools/plants -
171201 (a) Lead upto 10 Km MT 157.75
upto 1000 Kms
171210 Leading all types of PSC sleepers beyond 2.7 metre length
by road vehicles with contractor's vehicle, crane, crew,
consumables, labour, tools & plants etc. excluding loading /
unloading, to destination with all contractor's labour,
tools/plants -
171211 (a) Lead upto 10 Km MT 167.61
171214 (d) Extra to Items no. 171211, 171212 &171213 for additional MT / 5 KM 7.25
lead beyond 400 Km for every 5 Km or part thereof upto 1000
Kms
171220 Unloading of Wooden / Steel / CI sleepers in Depot / Station /
Mid-section between stations in neat manner for Railway
usage from departmental material train (DMT) or contractor's
/ Railway's Truck/Trailer with crane or any other means
including crossing of one track and lead upto 250 metre & lift
upto 5 metre -
171222 (b) In yards not involving traffic block or on lines, not opened MT 91.60
to traffic
171223 (c) From Truck / Trailer MT 79.28
4 of 7

171230 Unloading of 52kg / 60kg PSC line and special sleepers upto
2.7 metre length in Depot / Station / Mid-section between
stations in neat manner for Railway usage from departmental
material train (DMT) or contractor's / Railway's Truck/Trailer
with crane or any other means including crossing of one track
and lead upto 250 metre & lift upto 5 metre with contractor's
labour, tools & plants, machinery, consumables etc. -

to traffic
171240 Unloading of 52kg / 60kg PSC special sleepers beyond 2.7
metre length in Depot / Station / Mid-section between stations
in neat manner for Railway usage from departmental material
train (DMT) or contractor's / Railway's Truck/Trailer with
crane or any other means including crossing of one track and
lead upto 250 metre & lift upto 5 metre with contractor's
labour, tools & plants, machinery, consumables etc. -

to traffic
171250 Spreading of New / SH PSC sleepers along track on either Each Per 250 41.72
side manually or mechanically including loading, unloading & metre Lead
transportation, if required with lead of every 250m or part
thereof upto total lead of 1000m and all lifts
171251 Extra to Item no. 171250 for additional lead of every 500m or Each Per 500 23.06
part thereof beyond 1 km and upto 3 km with all lift metre Lead
171260 Collecting and stacking released Wooden / Steel / CI Each 16.17
sleepers, classification-wise within free lead of 1000 metre
and lift of 5 metre including crossing of single track including
existing track fittings and fastenings, i.e. keys, cotters,
bearing plates, tie bars etc.
3. Miscellaneous Items :
171270 Lifting the removed rail sleeper panels from the bank slopes Running Metre 171.28
or any other locations within a lead of upto 250 metre and lift /
descent upto 5 metre by using suitable capacity poclain/crane
without causing damages to rail-sleeper panel and placing
the same on formation to correct level and alignment during
line block / suspension of line
171280 Leading Rails / Switches / Crossings / SEJ Rails / Glued
Joints of any rail section with or without fittings by road with
contractor's vehicle, crane, crew, consumables, labour, tools
& plants etc. excluding loading / unloading, to destination with
all contractor's labour, tools/plants -
171281 (a) Lead upto 10 Km MT 148.99
171282 (b) Extra to Item no. 171281 for additional lead beyond 10 Km MT / 5 KM 17.98
for every 5 Km or part thereof upto 100 Km
beyond 100 Km for every 5 Km or part thereof upto 400 Km
upto 1000 Km
5 of 7

171290 Loading all types of track fittings and fastenings, i.e. fish
plates, joggled fish plate, clamps, bearing plates, tie bars,
keys, cotters, ERCs, GR pads, liners and other fittings into
Wagons / Truck / Trailer -
to traffic
171300 Leading of miscellaneous items, P.Way fittings etc. by road in
contractor’s vehicles with crane, crew, consumables, labour,
tools & plants etc. excluding loading/unloading, to destination
with all contractor's labour, tools/plants -
171301 (a) Lead upto 10 Km MT 154.72
171302 (b) Extra to Item no. 171301 for additional lead beyond 10 Km MT / 5 KM 18.68
for every 5 Km or part thereof upto 100 Km
beyond 100 Km for every 5 Km or part thereof upto 400 Km
upto 1000 Km
171310 Unloading of Switches / Crossings / SEJ Rails / Glued Joints
of any rail section and length with or without P.Way fittings &
fastenings in neat manner for Railway usage from
Truck/Trailer with lead upto 250 metre & lift upto 5 metre -
to traffic
171320 Unloading of fish plates, joggled fish plate, clamps, bearing
plates, tie bars, keys, cotters ERCs, GR pads, liners and
other fittings in neat manner for Railway usage from
Truck/Trailer with lead upto 250 metre & lift upto 5 metre -
to traffic
171330 Collection and stacking of various materials at nominated
stacking location with serviceable and un-servicable ones
separately within a lead upto 250 metre and lift upto 5 metre
including crossing of single track wherever necessary,
including posting of look-out man during collection / stacking -
171331 (a) Rails less than 6 metre MT 353.31

171332 (b) Rails upto length of 6 metre, all types of crossings, SEJ, MT 509.94
Glued Joints, Check Rails etc. -
171333 (c) PSC sleepers except Turnout PSC sleepers MT 432.31
171334 (d) Turnout PSC sleepers MT 423.69
171335 (e) Wooden / Steel / CI sleepers MT 275.68
171336 (f) P.Way fittings of all types and other similar loose items MT 314.55
171340 Relocating existing P.Way materials and stacking these
neatly within lead of 1000 metre and free lift of 5 metre in a
neat and countable manner, complete and as directed by the
Engineer in-charge for -
171341 (a) Rails MT 373.62
171342 (b) PSC Sleepers MT 280.96
6 of 7

171350 Restacking Rails and Girders available in working area by MT 442.38
leading the same away from working area, duly loading by
mechanical means and stacking at specified location in a
neat and countable manner including Loading, Leading &
Stacking within station yard involving maximum lead of 1000
metre and lift upto 5 metre including other incidental charges
etc.
171360 Restacking boulders available in working area by leading the Cum 204.62
same away from working area, duly loading by mechanical
means and stacking at specified location in a neat and
countable manner including Loading, Leading & Stacking
within station yard involving maximum lead of 1000 metre and
lift upto 5 metre including other incidental charges etc.
171370 Leading out temporary girder with Railway's dip lorry under
traffic block period including loading, leading and unloading
the same by contractor's men & materials, erection of
temporary staging aside track at loading and unloading points
clear of running trains. (All labour & materials to be arranged
by contractor and Dip Lorry, steel cribs & wooden sleepers to
be supplied by Railway free of cost) -
171371 (a) For lead upto 250 metre, Lift of 5 metre and crossing of MT 704.64
one running track
171372 (b) Extra to Item no. 171371 for additional lead of every 1 Km MT / KM Lead 207.00
or part thereof beyond 250 metre, as directed
171380 (c) Extra to Item no. 171371 for crossing of each additional MT / Track 258.59
running track beyond one track, as directed Crossing
171390 (d) Extra to Item no. 171371 for additional lift beyond 5 metre MT / 1 metre Lift 184.82
for each 1 metre lift or part thereof, as directed
7 of 7
IR's Unified Standard Schedule Of Rates -2019 Chapter-18 : Level Crossings
CHAPTER - 18 : Level Crossings

1. Dismantling of Level Crossings :

181010 Opening of level crossing upto required width from
centre line of track for replacement of existing sleepers
with PSC sleepers including dismantling pucca road
surface and removing of ballast, muck etc., screening of
ballast & stacking the same near level crossing and
disposing of all debris at the location, as directed by
181011 (a) With existing PSC sleeper Sqm 304.42
181012 (b) With existing Wooden / Metal sleeper Sqm 338.03
181020 Digging road surface at all types of level crossing
surface, removing spoils upto bottom of sleepers and
refilling soil to original level by proper ramming and
181021 (a) With existing PSC sleeper Sqm 467.62
181022 (b) With existing Wooden / Metal sleeper Sqm 326.08
181023 (c) Extra to Item no. 181021 or 181022 for level Sqm 53.47
crossing with precast concrete blocks
181030 Dismantling existing check rail, blocks, bolts & nuts and Running Metre 216.80
stacking these in a countable manner, as directed
181040 Dismantling exiting Rail Height Gauge carefully, as Each 2704.23
directed by engineer in-charge including removal of
cement concrete foundation and making surface clean
181050 Dismantling existing lifting barrier alongwith winch Set 13919.60
assembly and other components like boom, fringes,
locking arrangements, pedestal, boom rest, locking
rods/wires, pulley stakes, turn out wheels, 'A' base and
other materials connected with functioning of lifting
barrier without any damage including demolishing
concrete base of existing structures and clearing debris
in a neat and countable manner and clear of
infringements, as directed (barriers on both sides of
181060 Dismantling existing lifting barrier and other Set 12884.60
components except winch assembly, like boom, fringes,
locking arrangements, pedestal, boom rest, locking
rods/wires, pulley stakes, turn out wheels, 'A' base and
other materials connected with functioning of lifting
barrier without any damage including demolishing
concrete base of existing structures and clearing debris
in a neat and countable manner and clear of
infringements, as directed (barriers on both sides of
181061 Deduction to item no. 181060 for not dismantling ‘A’ Set 2072.30
base and its foundations
181070 Dismantling existing BG wicked gate / swing gate MT 1246.37
consisting of two leaves with gate posts, meeting post
and stopper post etc. without causing any damage to
material and stacking the same, as directed
2. Overhauling Of Level Crossings :
181080 Overhauling of level crossing including digging out upto
50mm below sleeper, screening of shoulder & crib
ballast, making good ballast with Railway's ballast from
stacks / heaps, replacing worn out fittings & fastenings,
check rails including scrapping of rails and tarring with
two coats with contractor's coal tar etc., filling back
ballast, ramming & levelling road surface and fixing
concrete slabs excluding coal tarring of road, as
Broad Gauge :
1 of 6
181081 (a) Level crossings with asphalted road surface Sqm 701.54
181082 (b) Level crossings with concrete blocks road surface Sqm 673.07
181083 (c) Level crossings with any other type of road surface Sqm 616.15
Metre Gauge :
181084 (a) Level crossings with asphalted road surface Sqm 585.16
181085 (b) Level crossings with concrete blocks road surface Sqm 542.46
181086 (c) Level crossings with any other type of road surface Sqm 514.00
181090 Annual maintenance of various assets at level crossing, Each 22393.95
e.g. lifting barrier assembly, boom locking arrangement
with ground lever frame, winch etc., as directed by
engineer in-charge. Scope of work includes –
(1) Adjustment of adjusters;
(2) Cleaning & oiling greasing of dust/rust of pulleys and
levers;
(3) Claening of check rail clearance and rope channels;
(4) Repairing of pot holes of road surface
3. Check Rail Related Works :
181100 Drilling of parabolic shaped holes to the web of check Each 123.01
rail as per drawings & specifications and as directed by
engineer in- charge
181110 Fabrication (including cutting & bending) and fixing of Running Metre 822.00
check rails of all sections as per Railway’s approved
drawings & specifications for level crossings / trolley
paths, duly cutting rail flanges, wherever required to
correct alignment and level with Railway’s rail, fittings &
fastenings, drilling of holes in check rails with all fittings,
e.g. rail screws / grip expansion bolts, brackets, packing
pieces, bolts, washers etc. and as directed by the
181120 Fabricating (cutting and machining) check rails of all
sections as per drawing and directions of engineer in-
charge with all contractor’s labour, tools and materials
complete. Rails shall be supplied by Railways
181121 (a) For rails of 90 UTS and above Running Metre 957.72
181122 (b) For rails of 72 UTS Running Metre 872.55
181130 Cutting foot of rail by gas or any other approved method Running Metre 158.03
for check rails with contractor’s tools & plants of Gas Cut
181140 Manufacture & supply of stoppers & other accessories, Each 356.42
such as grip expansion bolts, brackets, packing pieces,
bolts etc. as per standard drawing for fixing check rail at
level crossing
181150 Fixing check rails on level crossings with MS brackets, Each Level 4026.73
MS packing plates, bolts & nuts, spring washers etc. as Crossing
per approved drawing & specifications, as directed.
Rails, MS brackets, packing plates, bolts & nuts, spring
washers will be supplied by Railways
4. Painting Works :
181160 Painting of running rails and check rails with approved Running Metre 26.49
bituminous paint (RDSO's Specification no.
M&C/PCN/120-2011), duly cleaning running rail and
181170 Providing 1:6 sand bituminous mix (Hot mix) on pre-cast Sqm 888.03
slab joints duly levelling edges of slab and packing /
grouting as required on level crossing portion with all
labour and material by contractor.
181180 Painting speed breakers with paint of approved quality
& colour over the Bituminous surface near approaches
to level crossing, as directed -
181181 (a) With Normal paint (two coats) Sqm 121.73
2 of 6
181182 (b) With Hot melt thermoplastic road marking paint Sqm 147.10
5. Fencing And Gate Boom Related Works :
181190 Dismantling existing rail hurdle fencing including Running Metre 74.78
removal of base concrete and stacking released
materials in a neat and countable manner clear of
infringements from the track, removing debris clear of
site alongwith disposing debris, as directed by engineer
in-charge within free lead of 250 metre & lift upto 5
metre complete with all labour, tools & plants by
181200 Providing rail hurdle fencing on all four sides of level Running Metre 130.31
crossing approaches / platforms for a length of 15 m
(approx.) on each side with vertical rails fixed duly
embedded in Cement Concrete foundation at 3 metre
interval and two horizontal rails {overall height of
fencing being at 1.0 metre (approx.) above ground
level}. Item includes cutting rails and drilling holes as
required, assembling necessary accessories to required
length, painting fencing with two coats over one coat of
primer with paint of approved quality & colour with all
leads & lifts etc. complete and as directed.
{Note : (1) All labour, materials and tools & plants to be
arranged by contractor; (2) Rails of required section and
overall length will be supplied by Railway within free
lead of 250 metre. (3) Excavation and concrete work for
foundation will be paid separately}
181210 Dismantling existing Rail Post including demolishing Each Post 129.76
base concrete and stacking released materials within
free lead of 250 metre at location including clearing of
debris, as directed by engineer in-charge
181220 Fixing Rail Posts at locations shown in relevant Drawing Each Post 485.30
including earthwork / excavation for foundation, fixing
rail posts in cement concrete of 30cm x 30cm x 30cm
size and painting posts with two coats with paint of
approved quality & colour, clearing area and preparing
surface area of posts within 250m lead and lift of 5
metre complete, as directed {Note : (1) All labour,
materials and tools & plants to be arranged by
contractor; (2) Rails of required section and overall
length will be supplied by Railway within free lead of 250
metre. (3) Excavation and concrete work for foundation
181230 Providing Rail Height Gauge at approaches of level
crossings as per approved drawings in cement concrete
foundation using Railway's rails of all sections including
cutting, bending, drilling holes, erecting in position with
clamps, bolts & nuts including painting with one coat of
enamel paint of specified colour over one coat of
primer.
{Note : excavation and concrete work will be paid
181231 (a) Less than 5 metre width of level crossing Each 6580.30
181232 (b) Above 5 metre width of level crossing Each 8029.30
3 of 6
181240 Manufacture, supply, assembly, erection,

commissioning and testing of Lifting Barrier assembly,
having fragmented boom, boom light boxes with
suitable gate lamps, bell, boom supports (stay wires)
with adjusters, counter weight, pedestal and lock posts
with foundation of ‘A’ type as required, turn-union wheel
with brackets, balance and auxiliary weights clamps etc.
to approved standard drawing nos. SA 7973 to 7980
with all fittings and fastenings complete with contractor's
men, equipments and materials, as per specifications
and as directed (this item is excluding fringes) -
181241 (a) Upto 6m long Lifting Barrier Set 110424.15
181242 (c) Above 6m and upto 8m long Lifting Barrier Set 130656.10
181243 (c) Above 8m and upto 10m long Lifting Barrier Set 150781.10
181250 Manufacture, supply, assembly, erection, Each 32630.10
commissioning and testing of Winch Arrangement for
operation of level crossing lifting barriers, as per
RDSO’s approved layout, having standard covering
arrangement, foundation of ‘A’ type as required and
pulleys, pulley guides & stakes, horizontal rope wheel,
vertical rope wheel, wire adjusting screws, wire ropes 6
x 6 x 19 with all fittings, fixtures & accessories to
RDSO’s approved drawings with all parts including
painting of steel work as per specification, as directed
with cement concreting complete {Excavation and
181260 Manufacture, supply, assembly, erection,
commissioning and testing of auto boom locking
arrangement for existing lifting barriers, consisting of
interlocking ground frame near gate lodge, foundation of
‘A’ type, as required and connecting ground frame to
lock posts of gate booms with stipulated rodding on
guide rollers, supported on trestles including required
excavation, foundation, providing RCC NP-2 Class
pipes of 100mm dia. for road / rail crossing, as per
RDSO’s drawings complete {Excavation, concrete work
181261 (a) Single lever Each 15875.75
181262 (b) Double lever Each 22098.40
181270 Manufacture, supply and replacement of Railway's lifting Each 61328.35
barrier assembly of one side at level crossing & fixing it
on boom supports, painting iron works with two coats of
synthetic enamel paint over one coat of red lead primer
of approved quality & colour and setting lifting barrier for
smooth operation complete and as directed
181280 Manufacture, supply and replacement of Railway's lifting Each 66616.05
barrier assembly and boom supports, gate lamps at one
side of level crossing including required excavation &
concreting foundation of ‘A’ type, as required for
pedestal bases, duly cutting rails, wherever necessary
including painting iron works with two coats of synthetic
enamel paint of approved quality and colour over one
coat of red lead primer of approved quality, setting lifting
barrier for smooth operation complete and as directed.
{Excavation & concrete work will be paid separately}
4 of 6
181290 Manufacturing, supplying and laying at specified

locations factory made CC block pavers for road
surface of level crossings to RDSO Drg.No. M.00003,
manufactured using 20mm size graded hard stone
aggregates of approved quality with all contractor's
cement, labour, tools/plant and curing with all lead & lift
as per specifications and as directed by Engineer in-
charge :
181291 80mm thick blocks of M-35 grade for medium traffic Sqm 782.07
181292 120mm thick blocks of M-40 grade for heavy traffic Sqm 1179.90
181300 Fixing of Railway’s precast concrete slabs of different Sqm 114.86
sizes in position for level crossings / trolley path and
filling gap between check rail / running rail, slabs,
approaches etc. with asphalt complete and as directed
181310 Paving of level crossing road surface with Railway's Sqm 171.23
precast RCC slab / blocks as per standards / approved
drawings for light and heavy vehicles, supplied on bed
of sand, moorum or gravel, duly compacted and joints
filled with mixture of sand & tar/bitumen in proportion of
181320 Removal of RCC slab in existing level crossing portion Sqm 38.93
and in between tracks alongwith stacking them in
countable manner, as directed.
181330 Provision of speed breaker on approaches of level Running Metre 293.71
crossings with pre-cast concrete blocks (M-25) of
parabolic shape for entire road width with 125 mm
central rise, 2m wide in the middle including painting
two coats with paint of approved quality and colour
181340 Provision of one Asphalt Speed Breaker Rumble Strip Running Metre 488.25
on each side of the approaches of manned level
crossings as per approved drawing including painting
two coats with paint of approved quality and colour
181350 Manufacture & supply of tested GI wire rope of 6mm Kg 200.10
dia. and 6 ply to suit lifting barrier gates at nearby
P.Way Stores / Depot / Level Crossing gate, as directed
181360 Supplying and fixing of Boom Supports (stay wires) for Each 1141.09
lifting barrier (approx. 8mm dia.) with suitable adjuster
and other specials, as directed
181370 Manufacture and supply of vertical / horizontal Turnout Each 1000.50
Wheels and Shafts, mounted over base plate weighing
not be less than 6 Kg with supporting vertical base,
made of MS angle 75mm x 75mm x 10mm as per
Railway's approved drawings and specifications
181380 Manufacturing and supplying to site of work including Each 357.54
installation pulley with pulley stakes complete, wire rope
6 x 6 x 19 with accessories as per Railway’s approved
drawings for operation of lifting barriers complete, as
181390 Fabrication, supply and fixing of Fringes to the lifting Running Metre 564.83
barriers of various length at level crossing as per
approved drawing; made of MS flat of size 30mm x
6mm in 2 rows, 40mm x 6mm in 1 row horizontally and
MS flat of size 30mm x 6mm vertically at 500mm centre
to centre, painting iron works with two coats of synthetic
enamel paint of approved quality & colour over one coat
of red lead primer of approved quality, as directed
5 of 6
181400 Supplying and driving into ground 'C' class G.I. pipes of Each LC 610.08
20mm dia. x 150mm length for planting red flags and
lamp at 5 metre from centre of road at level crossings
with all leads & lifts {cost of G.I. pipes to be paid
181410 Manufacturing & supplying to site of work and installing Each 1518.52
Turnout wheel - Horizontal Rope Wheel - double wire (2-
way) including guides with all contractor's materials,
fabrication, labour, T&P, consumables, all leads & lifts
etc. complete as per approved drawing and as directed
181420 Supplying galvanized Steel Wire Rope for DW Kg 201.25
signalling 6 x 19 ply as per IRS No. S.11 amended upto
date for lifting barrier at level crossing gates, as directed
181430 Provision of Emergency Chain Posts for level crossings Each Post 591.42
as per Annexure 9/2 of Para 905 of IRPWM, duly cutting
rail to suitable length & drilling holes, providing hooks &
links / rings with necessary locking arrangements to fix
emergency chain, duly excavating pit and fixing rail
posts in vertical position, concreting base with cement,
base painting two coats with paint of approved quality &
colour over one coat of primer complete, as directed.
{Note : (1) Rails & chain will be supplied by Railways,
(2) Excavation and concrete work will be paid
181440 Fabrication, supplying and fixing Stop Boards of 600mm Each 1570.04
dia. to lifting barriers approved drawing, made of 3mm
thick plate, using MS clamps, providing 6 nos. of 50mm
dia. red reflector on stop board, painting iron works with
two coats of synthetic enamel paint over one coat of red
lead primer of approved quality & colour and writing
STOP mark over the board
181450 Manufacturing, supplying and fixing Wicked Gate of size MT 59159.07
1025mm x 1025mm x 1000mm at manned level
crossings, as per approved drawing including painting
with 2 coats of specified enamel colour paint over 1 coat
of primer including earthwork in excavation etc.
complete, as per specifications and as directed
181460 Providing rail reference posts by cutting rails of length Each 576.82
for 60cm above & 30cm below ground level, excavation
for foundation, fixing post in foundation in cement
concrete base of size 0.3m x 0.3m x 0.6m in 1:3:6 mix,
painting two coats with paint of approved quality &
colour and marking, as directed
{Note : (1) Rails will be supplied free by Railways in
available length at nearest stores depot; (2) Excavation
and concrete work will be paid separately}
181470 Fixing of wooden blocks of approximate size of 150mm
x 300mm x 1000mm on end of check rails at level
crossings with contractor's labour, tools & plants and as
181471 (a) With Railway’s wooden block by cutting Railway’s Each 209.85
wooden sleepers (supplied free by Railways) into blocks
by sawing to size
181472 (b) With Contractor’s hard wood block Each 1040.64
6 of 6
IR's Unified Standard Schedule of Rates -2019 Chapter-19 : Bridge Related Activities
CHAPTER - 19 : Bridge Related Activities

191010 Dismantling existing track on girder bridges including running
rails and guard rails, duly removing rails & fastenings,
sleepers & fastenings, foot path slabs etc. duly cutting
existing SW panels / LWR, if required into free rails of not
less than 12 metre length, complete and as directed :
191011 Broad Gauge Track Track Metre 505.82
191012 Metre Gauge Track Track Metre 454.02
191020 Removing existing small span steel girder / rail nest / slab /
hume pipe (upto 6.50 m span) from track during line block /
traffic-free period and stacking released materials, as
directed and filling earth in Bridge location including
compaction so as to allow traffic, dumping fresh ballast (from
nearby stacks within 50 m lead), boxing, packing etc., duly
linking permanent way to make the track fit for running of
train at restricted speed of 20 kmph, complete and as
directed. The work will be done under traffic block under
Railway's supervision (Earthwork to be paid seperately) :
Broad Gauge Track -
191021 For Clear span upto 3.05 metre Each 10052.15
191022 For Clear span above 3.05 metre Each 14767.15
Metre Gauge Track -
191023 For Clear span upto 3.05 metre Each 7694.65
191024 For Clear span above 3.05 metre Each 12122.15
191030 Insertion of temporary / steel girder in place of formation –
The work involves :
1. Insertion of C/C crib or wooden crib at both ends as per
Railway's design and materials in separate traffic blocks. This
includes dismantling of track (if required), removal of ballast,
excavation, installation of crib and filling of earth filled in
bags, as required;
2. Excavation for insertion of girder, if required, filling back by
bags full of earth under traffic block (if required);
3. Placement of girder by contractor’s tools & plants and
linking of track with the approaches including ensuring gauge
& cross level to make track fit for 20 kmph, as directed by
engineer in-charge. (In case bridge timber / channel sleepers
are required to be laid on girder, the same shall be paid
separately) -
(1) By Manual Method (By Slewing) :
191031 Upto clear span of 10 metre Each 20169.85
191032 Clear span above 10 metre and upto 15 metre Each 28012.85
(2) By Road Crane :
1 of 5

191040 Removal of temporary / steel girder and linking of track –
The work involves :
1. Removal of Steel / RH girder (including crib on both ends)
and placing it on crib / cess away from Railway track as
directed by engineer at site under traffic block;
2. Filling of Railway's earth by ramming, pulling ballast from
stack / adjoining track / same track, laying track, linking with
approach track and packing of ballast, so as to open rack at
20 kmph speed, boxing & dressing of cess, ballast profiling
etc. {(1) Work to be done under traffic block, (2) If earth is to
be brought by contractor, the same will be paid separately}
(1) By Manual Method (By Slewing) :
(2) By Road Crane :
191050 Dismantling of all types of existing track duly removing rails &
fastenings, sleepers & fastenings, removing and stacking
ballast upto formation level for bridge related works during
Traffic Block, and relaying of same track by pulling additional
ballast from stack / adjoining track / same track and linking it
with approach track including packing, boxing & dressing etc.,
as directed so as to open track at 20 kmph speed
2. Linking of Track Over Girders :
191060 Placement of Railway's RCC / PSC slab on bridge abutments
/ piers / staging etc. with contractor’s crane, labour, tools &
plant etc. complete, as directed and as per approved
drawings & scheme
191061 (a) Upto 5 MT Each 6851.70
191062 (b) More than 5 MT & upto 10 MT Each 8457.10
191063 (c) More than 10 MT & upto 20 MT Each 12261.30
191064 (d) More than 20 MT & upto 30MT Each 22949.40
191065 (e) More than 30 MT Each 45569.90
191070 Removing from track the existing Wooden sleepers with Each 175.53
fittings in running track conditions for TBTR (Through Bridge
Timber Renewal) / ISD (Increasing Sleeper Density) works &
stacking the same neatly at specified places with contractor’s
tools & labour, as directed by Engineer in-charge (For ISD
work, only identified unserviceable sleepers to be covered)
191080 Inserting in track Wooden sleepers, lying along cess / Each 200.39
formation / slope / toe with all fittings complete for TBTR / ISD
work to specified gauge with contractor’s tools including
aligning, levelling to make track fit for 20 kmph speed and as
191090 Removing from track existing Channel sleepers with fittings in Each 210.41
the running track conditions for TBTR / ISD works & stacking
the same neatly at specified places with contractor’s tools &
labour, as directed by Engineer in-charge (For ISD work, only
191091 Extra to item no. 191090 for Track Circuited area Each 12.95
2 of 5

191100 Inserting in track Steel Channel sleepers, lying along the cess Each 240.13
/ formation / slope / toe with all fittings complete for TBTR /
ISD work to specified gauge with contractor’s tools including
aligning, levelling to make track fit for 20 kmph speed and as
191101 Extra to item no.191100 for Track Circuited area Each 24.73
191110 Linking of track on Bridge with Wooden sleepers as per
approved drawing alongwith fittings, fixing running rails &
guard rails including required notching, drilling of holes etc.,
as directed and making track structure fit for normal speed.
(Rails, wooden sleeper and fittings will be supplied by
Railways)
191120 Linking of track on Bridge on Steel Channel sleepers as per
approved drawings alongwith fittings, fixing running rails &
guard rails including required notching, drilling of holes etc.,
as directed and making track structure fit for normal speed.
(Rails, steel channel sleeper and all fitting will be supplied by
Railways)
3. Casual Renewals Works :
191130 Renewal of isolated bridge timber with Railway's bridge
timbers after sizing, dressing, notching, making holes for
hook bolts and end binding with contractor's 6 mm wire
including removal & re-fixing of guard rails, as required in
running track and painting of girder at timber seats with
contractor's paint of approved quality by two coats, including
fixing of all fittings, leveling, gauging etc. -
191131 Broad Gauge Track Each 758.07
191132 Metre Gauge Track Each 682.17
191140 Replacement of isolated Steel Channel sleepers during traffic
block as per approved drawing alongwith fittings, re-fixing
running rails & guard rails including required notching, drilling
of holes etc., as directed and making track structure fit for
normal speed. (Steel channel sleeper and all fittings will be
supplied by Railways) -
191141 Broad Gauge Track Each 1309.63
191142 Metre Gauge Track Each 1143.00
191150 Replacement of running rail and guard rails on bridge portion Track Metre 564.42
over Wooden / Steel Channel sleepers, duly fixing fastenings
as per approved drawings with suitable bolts, clips etc.
including drilling of holes as per drawing with all leads & lifts
complete and as directed. (Rails, packing plates and fitting
will be supplied by Railways)
4. Provision of Guard Rails Work :
191160 Manufacture of flared portion of Guard Rail by cutting and Each Set 6364.10
bending to required shape & RDSO’s approved drawings
{Note : (1) Rails shall be supplied by Railways; (2) Rate is for
one set, i.e. bending of two rails - left and right}
191170 Fixing of flared portion of guard rail including fixing of rail Each Set 3511.53
screws, fish plates, rubber or MS packing plate, as directed
complete as per RDSO’s approved drawing. (Rail screw,
plate screw, fish plates etc. will be supplied by Railways)
191180 Drilling holes 25mm to 40mm dia. with drill twist in the foot of Each 82.53
guard rails for fixing guard rails on bridge
3 of 5

191190 Drilling of 25mm to 40mm dia. holes in PSC sleepers with Each 224.44
suitable rotary hammer / drilling machine at indicated location
for fixing of guard rails on bridges & its approaches as per
approved drawing and fixing of HDPE dowels to Drawing no.
RDSO/T-3002, procured from RDSO's approved sources
with contractor’s epoxy resins, as specified
191200 Making notches in guard rail of specified dimension to Each 73.14
accommodate dog spike / rail screws / guard rail bolts for
bridge timber / steel channel sleeper
191210 End binding of bridge timbers, wooden sleepers for plain Each 106.86
track / points & crossings sleepers with contractor's 6 mm MS
wire, lightly grooving the sleepers, tightening and binding,
twisting of same wire driven into sleeper to hold end-binding
in position, as directed
191220 Fabrication & supply of Galvanized Steel Channel Sleepers MT 136531.34
made from ISMC 150mm x 75mm standard rolled section
conforming to IS:2062 as per approved drawing complete
and as directed
191230 Supply & replacement of old crushed rubber pads of 10mm Per Sleeper 465.06
thickness with 25mm thick new rubber pads alongwith fixing
by proper adhesive on steel channel sleepers on bridges
complete, as directed by Engineer In-charge
191240 Supplying & fixing MS chequered plates 8mm thick between Kg 72.64
guard rails on un-ballasted deck bridge for gang pathway,
overlapping at regular intervals of 2m to 2.5m with rail screws
or bolts duly drilling holes in chequered plate, as directed
[Note : Overlapping of chequered plates shall not fall in
between sleepers]
191250 Providing staging during traffic block to 4.0m x 3.5m x 3.0m Each 15236.35
approx. size using steel cribs and/or wooden sleepers as per
RDSO’s approved drawing, duly excavating earth in pit and
driving rails / sleepers vertically to form shoring and filling gap
with sand bags etc. complete, as directed.
{Note : (1) Steel CC cribs, rails and wooden sleepers will be
supplied by Railway; (2) Dismantling and linking of track will
191260 Fixing of Railway's gang-way / landing slabs without Running Metre 559.82
damaging slab edges with proper concrete packing and fixing
with cement jointing in running traffic condition without block
complete and as directed
191270 Providing temporary shoring arrangements to protect existing Running Metre 2305.98
track structures, made of released rails at 1 metre or suitable
intervals in vertical and horizontal directions, if required for a
maximum height of 3 metre. Rail gap to be filled with wooden
blocks of 15 cm thickness to retain earth with all leads & lifts,
materials, tools & plants, as directed (Rail will be supplied by
Railways)
191280 Clearing waterway of major & minor bridges by removing Per Metre Span 159.30
weeds / shrubs / bushes, removing silt deposit, filling scours,
if any upto 10 metre from centre of bridge including disposing
waste and silt away from waterway ( Rates are for a single
line)
4 of 5

191290 Fabrication, supplying and fixing 600mm x 450mm Bridge Each 1893.13
Board made from 16 SWG MS Sheet duly welded or rivited to
back support of two 600mm long horizontal angles of size
25mm x 25mm x 3mm & two 2.5 metre long vertical support
of MS Angle of size 50mm x 50mm x 5mm, welded / rivited to
board. Vertical supports shall have split ends for proper fixing
in ground. Vertical supports of board shall be embedded in
ground in M 20 Cement Concrete blocks of size 300mm x
300mm x 300mm, complete job including painting & writing of
subject matter on bridge board, as directed by Engineer -
Incharge
{Note : Excavation & concrete work will be paid separately}
5 of 5
IR's Unified Standard Schedule of Rates -2019 Chapter-20 : Supply of P.Way Items
CHAPTER - 20 : Supply of P.Way Items

1. Nuts & Bolts
201010 Manufacturing and supplying Fish Bolts with Nuts of different
sizes as per specifications etc. with all contractor's material,
labour, tools & plants and machinery, all lead & lift etc. and as
directed by the Engineer in-charge :
201011 (a) Size 25mm x 130mm with nut & one plain washer to RDSO Each 50.03
Drg. No. T-11501, conforming to latest IRS specification &
alteration
201012 (b) Size 25mm x 140mm with nut to RDSO Drg. No. T-1899, Each 54.63
conforming to latest IRS specification & alteration
201013 (c) Size 25mm x 150mm with nut to RDSO Drg. No. T-11510, Each 56.18
201014 (d) Size 25mm x 160mm with nut, one plain washer & one Each 64.80
single coil spring washer to RDSO Drg. No. T-11511,
201015 (e) Size 25mm x 180mm with nut, one plain washer & one Each 66.82
single coil spring washer to RDSO Drg. No. T-11513,
201020 Manufacture & supply of Bolts & nuts and spring washers (for Kg 69.00
fixing MS brackets) as per RDSO Drg. No. RDSO/T/11550 or
T.11551 for bolt & nut and double coil spring washer as per
RDSO Drg. No.RDSO/T/1214 (One set comprises of 1 bolt, 1
nut & 1 spring washer)
201030 Manufacture & supply of galvanised MS holding down bolts Kg 115.00
with nuts, having two coats of electro-plating 18mm to 20mm
dia., 300mm long, one end threaded and other welded with
8mm dia. MS rods 100mm long perpendicular to the holding
down bolt for holding Railway's AC bearing plates in pit line
with all leads & lifts etc. complete and as directed
201040 Manufacture and supply of 25mm dia. bolts for points & Kg 55.20
crossing (with nut, single coil spring washer & plain washer) to
RDSO Drg. No. T-11504 to T-11549 with latest Alt. & IRS
Specification
201050 Manufacture and supply of Hook Bolt 28mm dia. & 320mm Each 40.25
long as per RDSO Drg. no. BA-1636/I/R2
2. Rubber Pads :
201100 Manufacture & supply of Grooved Rubber Sole Plates (GRSP)
as per RDSO Drg. from RDSO approved sources, as directed
by the Engineer in-charge :
201101 (a) GRSP as per Drg. No. RDSO/T-3711 Each 37.95
201102 (b) GRSP as per Drg. No. RDSO/T-3703 Each 34.50
201110 Manufacture & supply of Grooved Rubber Sole Plates (GRSP)
for special layouts as per RDSO approved drawing from
RDSO approved sources :
201111 (a) For 1 in 12 Turnout sets as per RDSO Drg. No.T-4732 Set 16560.00
201112 (b) For SEJs as per RDSO Drg. No.T-4149 Each 161.00
201113 (c) For 1 in 8.5 Turnout sets as per RDSO Drg. No.T-4865 Set 13202.00
201114 (d) For Derailing Switches sets as per RDSO Drg. No.T-5836 Set 6126.05
1 of 11

201120 Manufacture and supply of 60 Kg Composite Grooved Rubber Each 54.63
Sole Plate (CGRSP) to RDSO Drg. No.T-6618 for 60 Kg (UIC
Rail) and conforming to IRS specification for Composite
Grooved Rubber Sole Plate for placing beneath rails
(Provisional-2006) No. RDSO/M and C/RP-198/2006 with
amendments up to date (For service life of 300 GMT or 8
years, whichever is earlier)
201130 Manufacture & supply of Grooved Rubber Pads to be used for Set 303.60
steel channel sleepers for 60 Kg / 52 Kg running rails to RDSO
drawing No. RDSO/T-5197 to 5200 and RDSO/T-5155 to 5160
with 52Kg / 90R guard rails from RDSO approved sources to
IRS specification for grooved rubber pads (provisional 1989)
for 10mm thickness with all contractor's lead, lift, labour, tools,
plant and transportation etc. complete as instructed by
Engineer in-charge {One set constitutes Two nos.}
201140 Manufacture & supply of Elastomeric Pads 25mm / 30mm thick Set 349.60
as per RDSO drawing No. B/1636/I/R2 to suit Insulated steel
channel sleepers with all contractor's material, lead, lift, labour,
tools, plant and transportation etc. complete as per approved
drawings and as instructed by Engineer in-charge {One set of
sleeper constitute two Nos.}
3. ERCs, Liners, Fish Plate, Joggled Fish Plate :
201200 Manufacture and supply of Elastic Rail Clip-J, conforming to Each 54.05
IRS specification No.T-31-92 with latest corrigendum as per
Drg. No.T-4158 of RDSO with latest alteration
201210 Manufacture & supply of Glass Filled Nylon (GFN-66) Liners
as per RDSO Drg. from RDSO approved sources, as directed
by Engineer in-charge :
201211 (a) Liners to Drg. No.RDSO/T-3702 Each 9.20
201212 (b) Liners to Drg. No.RDSO/T-3706 Each 8.80
201213 (c) Liners to Drg. No.RDSO/T-3707 & 3708 Each Set 26.45
201220 Manufacture & Supply of Metal Liners as per RDSO Drg. from
RDSO approved sources, as directed by Engineer in-charge :
201221 (a) Liners to Drg. No. RDSO/T-3738 Each 26.45

201222 (b) Liners to Drg. No. RDSO/T-3740 Each 20.70
201223 (c) Liners to Drg. No. RDSO/T-3741 & 3742 Each Set 76.48
201230 Manufacturing and supplying Fish Plate of different sizes as
per specification IRS/T-1 from RDSO approved sources with
all contractor's material, labour, tools, all lead & lift etc. and as
directed by the Engineer-in-charge :
201231 (a) Fish Plate 60 Kg (1000mm long) to RDSO Drg. No. T-5916 Set 3942.20
201232 (b) Fish Plate 60 Kg (610mm long) to RDSO Drg. No. T-2434 Set 2272.40
201233 (c) Fish Plate 52 Kg (1000mm long) to RDSO Drg. No. T-5915 Set 3059.00
201234 (d) Fish Plate Combination 60Kg/52Kg RDSO T- 696 To T-699 Set 7072.50
201235 (e) Fish Plate Combination 52Kg/90R RDSO T- 1900 To T- Set 4600.00
1901
201240 Manufacturing and supplying Joggled Fish Plates of different
sizes as per IRS /T-1 specification from RDSO's approved
sources etc. with all contractor's material, labour, tools, plants,
all lead & lift etc. and as directed by the Engineer in-charge
2 of 11

201241 (a) Joggled Fish Plate (with bolt & nut) for use on defective Set 2817.50
welded joints for BG 60 Kg rail to RDSO Drg. no. T-5849
201242 (b) Joggled Fish Plate (with clamp and bolt & nut) for 52 Kg rail Set 2875.00
section to RDSO Drg. no. T-5551
201243 (c) Joggled Fish Plate (with bolt & nut) for use on defective Set 2254.00
welded joints for BG 52 Kg rail to RDSO Drg. No. T-5848
201244 (d) Joggled Fish Plate with 'C' Clamp for 60 Kg rail as per Set 4025.00
RDSO Drg. no. T-4016
201250 Manufacturing and supplying Galvanised MS Inner and Outer Set 499.10
Clips for Steel Channel Sleeper (RDSO Drg. No. T-6150 & T-
6151) {One set constitutes two inner & two outer clips}
4. Different Components Of Track :
201300 Manufacturing and supplying Mild Steel clip for fixing guard Set 138.00
rails on PSC sleeper as per RDSO Drg. No. RT-3083-3084
201310 Manufacture and Supply of Spherical Washers to Drawing no. Set 45.71
RDSO/T-023 (M) at Store of SE/P.Way complete and as
directed
201320 Manufacture and Supply of Single Coil Spring Washer T- Each 5.00
10773 as per RDSO Drg. No. RT-4015 at Store of SSE/P.Way
complete and as directed
201330 Manufacturing & supplying SGCI insert to Drg. no. Each set 103.50
RDSO/T/381-R2, as directed by Engineer in-charge
201340 Manufacturing & supplying linked chain made of 8mm dia. rods Metre 121.55
with joints welded with links of length not exceeding 40mm with
ring & bolt at one end and hook & locking arrangement at other
end, painted with two coats of PO red paint of various length of
5.5 m to 11 m of approved quality, as directed
201350 Manufacturing and supplying MS / CI Bracket (at level Set 788.26

crossing) as per Drg. no. RDSO/T/4151 or 4784 and CI
Distance Bracket (at level crossing) as per Drg. no.
RDSO/T/4152 or 4785., bolts & nuts, MS plates with
contractor's materials, steel, labour, tools, plants and
machinery with all lead & lift etc. complete and as directed by
Engineer in-charge {Note : (1) Material shall conform to RDSO
Specifications and as per latest RDSO drawings; (2) Materials
shall be procured only from Railway / RDSO approved
vendors; (3) Rates are inclusive of transportation of materials
to site by contractor's own road vehicles including loading &
unloading, as directed; (4) One set will comprise of MS/CI
bracket, CI distance bracket, nuts & bolts for both sides check
rails; (5) All above finished materials shall be supplied at
SSE/P.Way/Stores or Depot}
201360 Manufacture, supply & fixing of galvanised steel fittings of Set 2300.00
insulated galvanised steel channel sleeper for 60 Kg running
rails & 52 Kg Guard Rail as per RDSO drawing no. RDSO/T-
5155 to 5164 with up-to-date correction slips and
specifications with all contractor's lead, lift, labour, tools, plant,
transportation etc. complete as per approved drawings and
instructions of Engineer in-charge
201370 Manufacture, supply & fixing of galvanised steel fittings of Set 1764.10
insulated galvanised steel channel sleeper for 52Kg running
rails & 52 Kg/90R Guard Rail as per RDSO drawing no.
RDSO/T-5197 to 5200 with up-to-date correction slips and
specifications with all contractor's lead, lift, labour, tools, plant,
transportation etc. complete as per approved drawings and
instructions of Engineer in-charge
3 of 11

201380 Manufacturing and supplying Glued Joint as per specifications
with all contractor's material, labour, tools, all lead & lift etc.
and as directed by Engineer in-charge (Rails will be supplied
free by Railways) :
201381 (a) Glued Joint of 60 Kg rail to RDSO Drg. no. T-5843 Set 9890.00
201382 (b) Glued Joint of 52 Kg rail to RDSO Drg. no. T-5361 Set 8949.30
201390 Supply of D–Shackle 24mm x 28mm, as directed by Engineer Set 448.50
in-charge
5. Engineering Indicators :
201400 Manufacturing, fabricating and supplying retro-reflective sign
boards, made of 2mm thick aluminum sheet or 3mm thick
aluminium composite sheet, face to be fully covered with high
intensity encapsulated type heat activated retro-reflective
sheeting conforming to type-IV of ASTM-D4956-01 in yellow &
black or other colour combination including subject matter,
message, symbols, borders etc. as approverd by Engineer In-
charge or as per IRPWM guidelines, pasted on substrate by an
adhesive backing which shall be activated by applying heat
and pressure conforming to class-2 of ASTM-D-4956-01 and
fixing the same with suitable sized aluminium alloy rivets @ 20
cm c/c to back-support frame of M.S. angle iron of size 25mm
x 25mm x 3mm alongwith theft resistant measures, mounted
and fixed with 2 nos. M.S. angles of size 35mm x 35mm x
5mm to a vertical post made up of M.S. Tee section ISMT
50mm x 50mm x 6mm, back side of board shall be with non-
peelable weather-proof paint, consisting of one coat of zinc
chromate primer and two coats of epoxy paint. Vertical post
shall have black & white anti-corrosive paint or powder coating
complete, as directed
201401 (a) Bilingual Whistle Boards for level crossing Set 4579.16
201402 (b) Speed Breaker / Rumble Strips Board Set 3583.31
201403 (c) Un-manned Level Crossing Danger Stop Board Set 2925.95
201404 (d) Manned Level Crossing Indicator Board Set 4136.41
201405 (e) Single Strip / Double Strip Level Crossing Road Warning Set 2925.95
Board
201406 (f) Caution Indicator Baord Each 4104.21
201407 (g) Speed Indicator Board Each 3505.43
201408 (h) Stop Indicator Board Each 4104.21
201409 (i) Termination Indicator Board Each 5277.70
201410 (j) Flag Station Board Each 3116.53
201411 (k) Circular Stop Disc of 600mm dia. with vertical holding stand Each 3008.40
for fixing on emergency chain at level crossing
201420 Manufacturing and supplying Trolley Refuge Indicator Boards / Each 856.75
Level Crossing No. Boards, made of MS sheet of 2mm thick of
size 240mm dia. and 50mm x 50mm x 6mm angle, welded to
MS sheet, duly painting with 2 coats of ready mixed yellow
enamel paint over one coat of red oxide with all lead & lift as
per specification and as directed by Engineer in-charge
4 of 11

201430 Manufacturing, supplying and fixing Curve Indicator / Point Each 651.82
Indicator / SEJ Boards to be provided at various locations on
formation, made out of MS sheet 2mm thick of size 450mm x
300mm duly fixed with MS frame of 25mm x 25mm x 3mm
angle welded to 50mm x 50mm x 3mm MS angle, 1000mm
long post split and bent 100mm at bottom end with all lead &
lift as per specification and including painting of details with
enamel paint, as directed by Engineer in-charge (Earthwork &
concreting will be paid separately)
6. Small Track Machines :
201500 Manufacturing and supplying Rail Cutting Machine (Saw type) Each 42550.00
for cutting of rails from RDSO approved sources and as RDSO
specification no. TM/SM/4, dated 24.04.1991
201510 Manufacturing and supplying Abrasive Rail Cutter for cutting of Each 138747.50
rails from RDSO approved sources and as per RDSO
specification no.TM/SM/1(Rev. 01 of 2007)(Amended on
09.09.2008)
201520 Supply of Cutting Disc for Abrasive Rail Cutter from RDSO Each 920.00
approved sources and as per RDSO specification no.
TM/SM/2 (Rev. 01 of 2007)
201530 Supply of Hacksaw Blades size 300mm x 12.5mm x 0.63mm Each 184.00
{18 TPI (Eighteen teeth per inch)} from RDSO approved
sources and as per RDSO specification no. TM/SM/26 (Rev.
01 of 2004) or equivalent of approved brand as per direction of
engineer in charge
201540 Manufacturing and supplying Rail Drilling Machine for speedy Each 42550.00
drilling of holes. Machine shall be procured from RDSO
approved sources and as per RDSO specification no.
TM/SM/3 dated 24.04.1991
201550 Manufacture and supply of Drill Twist, made of High Speed
Steel (HSS) of various sizes of Addision / I.T. make or
equivalent, as directed by the Engineer in-charge
201551 (a) 7.2 mm dia. Each 494.50
201552 (b) 16 mm dia. Each 619.85
201553 (c) 18 mm dia. Each 632.50
201554 (d) 26.5 mm dia. Each 747.50
201555 (e) 28.75 mm dia. Each 856.75
201556 (f) 31.75 mm dia. Each 920.00
201560 Manufacturing and supplying portable D.C. Welding Generator Each 207000.00
for resurfacing of points & crossings by hand welding and also
for emergency lighting. Machine shall be procured from RDSO
approved sources and as per RDSO specification
no.TM/SM/20, dated 19.11.1992
201570 Manufacturing and supplying Rail Profile Weld Grinder with Each 80500.00
Generator for rail profiling. Machine shall be procured from
RDSO approved sources and as per RDSO specification no.
TM/SM/10, dated 16.08.1991
201580 Manufacturing and supplying Weld Trimmer for removal of Each 120750.00
extra metal from rail head by trimming A.T. Weld from RDSO
approved sources. Machine shall be procured from RDSO
approved sources and as per RDSO's Specification No.
TM/SM/9, dated 16.08.1991
201590 Manufacturing and supplying Hydraulic Rail Tensor / Stressor Each 235750.00
for carrying out distressing from RDSO approved sources and
as per RDSO specification no. TM/SM/32, dated 20.12.1991
5 of 11

201600 Manufacturing and supplying Hydraulic Track Jack non- Each 6325.00
infringing type of capacity 15 tonne from RDSO approved
sources and as per RDSO specification no. TM/SM/31, dated
08.05.1996
201610 Manufacturing and supplying Mechanical Track Lifting Jack of
different capacity from RDSO approved sources and as per
RDSO specification no. TM/SM/21 of 2003 for -
201611 (a) 8/10 tonne capacity Each 8625.00
201612 (b) 15 tonne capacity. Each 9775.00
201620 Manufacturing and supplying Portable Track Lifting and Each 92000.00
Slewing Device for lifting & slewing of track from RDSO
approved sources and as per RDSO specification
no.TM/SM/25 of 2004
201630 Manufacture & supply of Gauge cum Level precision
instrument with sprit level transportation box from RDSO
approved Firm at SSE/P.Way stores for -
201631 (a) Broad Gauge as per RDSO specification no. TM-58 dated Each 2587.50
11.06.2001
201632 (b) Metre Gauge as per RDSO specification no. TM-59 dated Each 2300.00
29.06.2001
201633 (c) Narrow Gauge Each 1840.00
201640 Manufacture & supply of P.Way Inspection Kit in proper Each 13800.00
cabinet with folding gauge from RDSO approved firm at
SSE/P.way stores -
201650 Manufacturing & supplying Sensitive Spirit Level as per Each 517.50
approved RDSO Drawing no. T-3254
201660 Manufacture & supply of Magnetic Base type Rail Each 977.50
Thermometer - Dial from RDSO approved sources at
SSE/P.Way stores, as per RDSO specification no. TM-67,
dated 28.01.2002 (Rev.01 of 2010)
201670 Supply of RDSO approved Standard Rail Thermometer -
201671 (a) Embedded Type Each 1380.00
201672 (b) Magnetic Type Each 977.50
201673 (c) Continuous Type Each 23000.00
201680 Manufacturing and supplying Electronic Toe Load Measuring Each 63250.00
Device for toe load measurement of ERCs from RDSO
approved sources, duly calibrated by RDSO and as per
RDSO's Specification No. TM/SM/ETLMD/218 of 2003
201690 Manufacturing and supplying of Tongue for Toe Load Each 1150.00
Measuring Device from RDSO approved sources and as per
latest technical specifications, issued by RDSO
201700 Manufacturing and supplying Self Propelled Light Inspection Each 92000.00
Trolley with pay load capacity of 300 kg (approx.) with speed
potential upto 20 kmph. Manufacturer shall be RDSO
approved firm and Trolley shall be as per RDSO specification
no. TM/SM/28, dated 15.09.2010
201710 Manufacturing and supplying Powered Material Trolley for Each 230000.00
transporting materials to site of work. Pay load capacity shall
be 1 MT (approx.) and speed potential shall be 30 kmph.
Manufacturer shall be RDSO approved firm and Trolley shall
be as per RDSO specification no. TM/SM/33 dated 06.06.1996
201720 Supply of B.G. Push Trolley complete with umbrella and Each 43125.00
bench, procured from RDSO approved source at SSE/P.Way's
Store. Trolley shall be as per latest technical specification and
drawing issued by RDSO
6 of 11

201730 Supply of B.G. Diplorry of 10 MT capacity complete as per Each 59800.00
RDSO Drawings from RDSO approved Firm at SSE/P.Way’s
Store
201740 Supply of B.G. Rail Dolly complete, procured from RDSO Each 8050.00
approved sources at SSE/P.Way's Store. Dolly shall be as per
latest drawing and technical specification issued by RDSO
201741 Supply of complete Wheel Assembly for BG Rail Dolly as per Each 1725.00
approved drawing
201742 Supply of Axle of Wheel for BG Rail Dolly Each 230.00
201743 Supply of Wheel Drum for BG Rail Dolly Each 575.00
201750 Manufacturing and supplying Light Weight (weighing upto 20 Each 5520.00
kg) Rail cum Road Trolley for carrying materials weighing upto
100 Kg. Trolley shall be procured from RDSO approved
sources and equipment shall be as per RDSO specification no.
TM/SM/16, dated 31.03.1992
201760 Manufacturing and supplying Gang tool box made either by Kg 78.87
riveting or welding of 16 SWG Mild Steel sheet and M.S. anlge
iron frame complete as per size and shape approved by
Engineer In-charge. The box shall be painted with two coats of
synthetic enamel paint applied over red oxide primer, as
approved & directed
201770 Train Speed Recorder, as per RDSO's Specification no. Each 124775.00
TM/SM/TSR/221, dated 16.04.2004
7. Welding Equipments :
201800 Manufacture & supply of Steel Mould Shoes for SKV welding
as per IR's AT Weld Manual :
201801 (a) 52Kg - 2 piece Mould Shoe Set 2760.00
201802 (b) 52Kg - 3 piece Mould Shoe Set 3082.00
201803 (c) 60Kg - 2 piece Mould Shoe Set 2990.00
201804 (d) 60Kg - 3 piece Mould Shoe Set 3082.00
201810 Manufacture & supply of rail file approximate size 15" long for Each 517.50
filing SKV welds from Railway approved firm
201820 Manufacture & supply of Welding Equipments, as directed by
Engineer in-charge :
201821 (a) Welding Cable Copper (50mm2 ) Metre 126.50
201822 (b) Pressure Regulator for Oxygen Multi-stage cylinder Each 1667.50
201823 (c) Pressure Regulator for Acetylene gas cylinder Each 1667.50
201824 (d) 500amp Arc Welding Electrode Holder Each 97.75
201825 (e) Gas Cutting Torch Blow Pipe Each 1092.50
201826 (f) Hand Gloves Leather (Left Hand & Right Hand) Set 36.80
201827 (g) Hose Rubber for Oxygen 6mm dia. Metre 32.20
201828 (h) Hose Rubber for Dissolved Acetylene (D.A.) 6mm dia. Metre 32.20
201829 (i) Welding Screen (approximate size 4" x 3") Each 172.50
201830 Manufacture & supply of Gas Cylinders (returnable cylinders)
with gas for repairing of check rails at level crossings and
guard rails on bridges alongwith other works, as required :
201831 (a) Oxygen Gas Cylinders (Pressure 1800 lbs to 2000 lbs) Each 9200.00
201832 (b) Dissolved Acetylene (D.A.) Gas Cylinders with pressure of Each 5520.00
15 Kg to 20 Kg
201840 Manufacture & supply of wire brush 25mm long, as directed by Each 17.25
Engineer in-charge
201850 Supply of Used Lubricating Oil of approved quality Litre 11.50
8. USFD Related Items :
7 of 11

201900 Manufacture & supply of Ultrasonic Digital Single Rail Tester, Each 641700.00
capable of working with 230 ± 10 volt AC supply or battery
operated from RDSO approved company, conforming to
RDSO's Specification no. RDSO/M&C/NDT/128/2007
201910 Manufacture & supply of Ultrasonic Digital Double Rail Tester, Each 1006250.00
capable of working with 230 ± 10 volt AC supply or battery
operated from RDSO approved company, conforming to
RDSO's Specification no. RDSO/M&C/NDT/130/2007
201920 Manufacture & supply of Digital Ultrasonic Testing Equipment Each 297505.00
and its essential accessories for detection of flaws in welded
rail joints, i.e. Alumino-Thermic (AT), Flash-Butt (FB) and Gas
Pressure (GP) welded rail joints. Equipment shall be capable
of detecting flaws, finding their location and storing A-scan
signals obtained in joints of rail sections during ultrasonic
testing of welded rail joints. Manufacturer shall be RDSO
approved firm and equipment shall be as per RDSO's
technical specification no. M&C/NDT/129/2005
201930 Manufacture & supply of spares for USFD Testing Equipment :
201931 (a) 0 degree 4 MHz Double Crystal PZT Probe - 18mm dia. for Each 3565.00
rail testing
201932 (b) 0 degree 2 MHz double Crystal PZT Probe - 18mm dia. for Each 2209.15
AT weld testing with BNC connector
201933 (c) 70 degree 2 MHz (F+B) Single Crystal PZT Center Probe - Each 3754.75
20mm x 20mm square for rail testing
201934 (d) 70 degree 2 MHz (F+B) Single Crystal PZT GFC Probe - Each 3680.00
20mm x 20mm square for rail testing
201935 (e) 70 degree 2 MHz Single Crystal PZT Hand Probe - 20mm x Each 2789.90
20mm square for AT weld testing with BNC connector
201936 (f) 45 degree 2 MHz Single Crystal PZT Hand Probe - 20mm x Each 2789.90
20mm square for AT weld testing with BNC connector
201937 (g) 14.8 Volts / 7 Ampere Hour, Lithium Rechargeable Each 14375.00
Maintenance-free Battery Pack
201938 (h) Battery Charger cum Main Power Pack with charge status Each 16675.00
indicator and power chord, Input 110-260 V AC, 50-60 Hz
201939 (i) BNC Double End Connector with a co-axial cable of length 3 Each 431.25
metre
201940 Manufacture & supply of 70 degree 2 MHz Single Crystal PZT Each 7475.00
Probe in pair of 20mm x 20mm square side looking probe
(SLP) with BNC connector
201950 Manufacture & supply of 70 degree 2 MHz (F+B) single crystal Each 3795.00
PZT Non-gauge Face Side Probe - 20mm x 20mm square for
rail testing
201960 Manufacture & supply of Tandem Test Rig with two 45 degree Each 12075.00
Probes for AT weld testing
201970 Manufacture & supply of spares for Digital SRT USFD Machine
:
201971 (a) Complete Trolley Carriage Assembly Each 22425.00
201972 (b) Complete Trolley Sub-assembly of Central Probe Housing Each 10350.00
201973 (c) Complete Trolley Sub-Assembly of Gauge Face Probe Each 2875.00
Housing
201974 (d) Complete Trolley Wheel Assembly Each 5750.00
201980 Manufacture & supply of spares for Digital DRT USFD
Machine :
201981 (a) Complete Trolley Carriage Assembly Each 26450.00
201982 (b) Complete Trolley Sub-assembly of Central Probe Housing Each 9775.00
8 of 11

201983 (c) Complete Trolley Sub-Assembly of Gauge Face Probe Each 4600.00
Housing
201984 (d) Complete Trolley Wheel Assembly Each 10350.00
201990 Manufacture & supply of Standard Rail Test Piece with artificial Each 30475.00
defects, made by EDM (Electric Discharge Machine) System
alongwith wooden stand for sensitivity setting of SRT as per
IR's Manual of Ultrasonic Testing of Rails and Welds, revised
2006 with latest Correction Slips (New 60 Kg/52Kg rail piece of
½ meter length shall be supplied by Railway)
202000 Manufacture & supply of Standard Rail Test Piece with artificial Each 57500.00
defects, made by EDM (Electric Discharge Machine) System
alongwith wooden stand for sensitivity setting of DRT as per
IR's Manual of Ultrasonic Testing of Rails and Welds, revised
2006 with latest Correction Slips (New 60 Kg/52Kg rail piece of
½ meter length shall be supplied by Railway)
202010 Manufacture & supply of Standard AT Weld Test Piece with Each 17250.00
artificial defects, made by EDM (Electric Discharge Machine)
System for sensitivity setting of AT Weld Tester as per IR's
Manual of Ultrasonic Testing of Rails and Welds, revised 2006
with latest Correction Slips (New 60 Kg/52Kg weld piece of
sufficient length shall be supplied by Railway)
202100 Manufacture & supply of Anti-corrosive Bituminous Paint Litre 92.00
(Black) ready mix paint conforming to IS:9862-1981
202110 Manufacture & supply of Enamel Paint all shades as per Litre 161.00
RDSO Specification No. M&C/PCN/120-2011
202120 Manufacture & supply of Aluminum Paint as per RDSO Litre 149.50
Specification No. M&C/PCN/120-2011
202130 Manufacture & supply of Red-oxide ready-mix Paint to IS : Litre 92.00
2074 of reputed make
202140 Manufacture & supply of Grease Graphite Grade 'O' of IS:408- Kg 230.00
1981
202150 Manufacture & supply of painting brush of difference size :
202151 (a) 25 mm width Each 46.00
202152 (b) 50 mm width Each 57.50
202153 (c) 75 mm width Each 69.00
202154 (d) 100 mm width Each 86.25
202160 Manufacture & supply of Mild Steel Core Wire Rope required
for unloading Rail panels :
202161 (a) Wire Rope with both ends eye & crimping – 20mm dia. Metre 230.00
202162 (b) Wire Rope with both ends eye & crimping - 25mm dia. Metre 316.25
202163 (c) Wire Rope with both ends eye & crimping - 50mm dia. Metre 575.00
202170 Manufacture & supply of Tri Colour Hand Signal Torch / Lamp Each 172.50
190mm x 80mm x 120mm
202180 Manufacture & supply of Keyman's Pitthu (Hatch-back) Bag of Each 2530.00
size 30cm x 40cm x 20cm with weight 0.860 Kg, made of
super quality canvas cloth having four pockets
202190 Manufacture & supply of Safety Jacket with high glow reflective Each 2645.00
EN-471 tapes stitched and laminated on glow / florescent
orange / yellow industrial Cloth / Net {Tech. Spec. - Net 100%
Polyester, Fabric 65%+35% Polyester Cotton & Reflective tape
gloss Beads/Presmatic as per EN-471}
9 of 11

202200 Manufacture & supply of orange colour Shirt / T-Shirt for
Trackmen with Polyester Cotton Sinker Fabric, 52% polyester
blending, GSM (200 in ready form & 170 on order) with
matching collar & tape as directed by engineer in-charge for -
202201 Half sleeves Shirt / T-Shirt Each 345.00

202202 Full sleeves Shirt / T-Shirt Each 460.00
202210 Manufacture & supply of Industrial Safety Helmet with facility Each 920.00
for attachment of miner's light for use by Trackmen etc. Helmet
shall be made of high impact, heat & chemical resistant HDPE
polymer with 6 point adjustable and comfortable head harness
alongwith high absorption & washable sweetband. Also, chin
strap to helmet with special brim design shall be made of high
tensile nylon conforming to IS:2925-1984. Helmet shall be ISI
marked and from NSIC registered manufacturer.
202220 Manufacture & supply of Rechargeable LED Torch of 1 watt

with microcontroller based circuit for attachement to Safety
Helmet alongwith charger. LED life of more than 35000 hours,
having Dual Beam spread with primary beam width of 40
degree & secondary beam width of 140 degree and Beam Lux
at low/high power as 10000/20000 Lux at surface alongwith -
202221 Built-in 4V/3000mAh Sealed Maintenance Free (SMF) Battery Each 1840.00
having back-up of 3-4 hours in full power mode and 5-6 hours
in low power mode
202222 Built-in 3.7V/2000mAh Lithium Ion Battery having back-up of 6- Each 2300.00
8 hours in full power mode and 10-12 hours in low power
mode
Manufacture & supply of Measuring Tape Non-Metallic
fibre glass type :
202231 (a) 30 metre long Each 327.75
202232 (b) 15 metre long Each 207.00
202233 (c) 5 metre long Each 120.75
202240 Manufacture & supply of A4 size paper for Xerox, Copier, Ream 141.59
Computer, Printer of 80 GSM thickness.
202250 Manufacture & supply of Gang Work-site Remote Control Each 62100.00
Hooter, as per RDSO Specification no. TM/SM/318, dated
21.05.2008
202260 Manufacture & supply of Mechanical Hooter Light Weight Each 30015.00
having range upto 500 metre
202270 Manufacture & supply of Walkie Talkie set as per RDSO Set 16100.00
approved specifications for 10 Km range
202280 Manufacture & supply of Battery for Walkie Talkie Set with 3 Each 1035.00
days back up
202290 Manufacture & supply of Battery Charger for Walkie Talkie Set Each 230.00
202300 Manufacture & supply of Weedicide Chemical (Glyphosate), Litre 287.50

capable to kill entire weed in track
202310 Manufacture & supply of Dendrite (Synthetic Rubber Based) Litre 184.00
Adhesive
202320 Manufacture & supply of retro-reflective luminous sheets / Sqm 1965.19
tapes of approved quality of various colours on Engineering
Indicator Boards etc. as per approved specifications and as
directed by engineer in-charge
202330 Manufacture & supply of Engine Oil (Servo Premium CF4 Litre 103.50
15W40) or equivalent
10 of 11

202340 Manufacture & supply of Servo Grease MP of IOCL or MP Kg 143.75
Grease-2 of HPCL or MAK Grease MP-2 of BPCL
202350 Manufacture & supply of Hydraulic Oil (Servo System-68) Litre 172.50
202360 Manufacture & supply of single liquid solution of Henkel or Each 3565.00
similar make Loctite Rail Safe in 250ml pack for tightening of
all types of track nuts & bolts to prevent loosening during
vibration having break loose torque of 400Nm to 540Nm, as
per ISO 10123 norms with shear strength of liquid solution as
25 to 35 N/mm2 having viscosity 1500 to 3000 (Centipoise) &
specific gravity as 1.1 ± 0.05
202370 Manufacture & supply of Poly Chloroprene rubber-based Kg 2300.00
Solvent (toulene free, i.e. not harmful to human body) of
Henkel or similar make Loctite Track Safe to prevent working
out of rubber pads, having density 0.85±0.01 gm/cm3,
viscosity of the solvent as 1500 to 1900 (centipoise) at 30
degree centigrade & shear strength of 8 to 12 Kg/Sq.Inch
202380 Manufacture & supply of Red Banner Flag of size 2m x 1m, Each 46.00
made of cotton cloth
202390 Manufacture & supply of Hand Signal Flag (Red or Green) of Each 46.00
approximate size 0.45m x 0.45m made of cotton cloth
202400 Manufacture & supply of Heavy Duty AA Carbon-Zinc Battery Each 11.50
of approx. 65mm long for Torch
202410 Manufactue & supply of LED Torch of approx. 250mm long Each 138.00
having Three Batteries of AA-Carbon-Zinc
202420 Manufactue & supply of Whistle Thunder Each 5.75
11 of 11
IR's Unified Standard Schedule of Rates - 2019 Chapter-21 : Miscellaneous Items
CHAPTER - 21 : Miscellaneous Items

211010 Fixing MS Indicator Boards as per standard design including
excavation, refilling, concreting in foundation and painting
{Note : (1) Supply of steel for posts & boards shall be paid
separately; (2) Excavation & concrete work will be paid
separately} -
211011 Boards with single post Each 246.56
211012 Boards with two posts Each 252.31
211020 Erection or removal of temporary Engineering Indicator Board
or any other board at specified locations without causing
infringement to track etc. complete and as directed
211021 For erection Each 189.81
211022 For removal Each 155.71
211030 Dismantling Check Rail on curves on track of all rail sections, Metre 101.37
duly removing fish plates and bolts including removing chairs
from sleepers, leading and stacking released materials away
from track clear of infringements, complete and as directed
211040 Breaking Rails By Railway's Jimcrew :

211041 Rail sections of 75R or below Each 123.83
211042 Rail sections of 90R or above Each 154.78
211050 Casting and positioning of pre-cast cement concrete Fouling cum 4206.13
Mark as per approved drawing at station yard, duly painting
letters of Fouling Mark, complete and as directed
211060 Providing and errecting water proof Gypsy Tent of size 3m x Per Day 630.20
3m for a specific period of time and removal of the same after
completion of work or as directed by Engineer in-charge
211070 Provision of furniture temporarily for site work in good

condition at different locations as per direction of Engineer In-
charge, for a specific period of time & removing the same
after completion of work
211071 (a) Office Table of size 1.2m x 0.9m Each Per 106.38
Day
211072 (b) Office Chairs with cushioned seat, back and arms Each Per 28.75
Day
211073 Supply of Potable Drinking Water in 20 litres plastic container Each 69.00
as per standard specifications (container shall be returned Container
back after water consumption)
211080 Plaining of Railway's Fish Plates of all rail sections for Each 258.00
insulated joints by grinding / plaining / milling fishing plains of
fish plate and enlarging bolt holes to 32mm dia.
211090 Converting Railway's Fish plate into joggled fish plate for all Each 191.95
rail sections as per standard drawing from Railway's fish
plates including elongation of hole, bending, as required
211100 Removing / Re-erecting existing Gradient Post / Kilometre
Post, duly demolishing concrete foundation, fixing the post in
cement concrete foundation as per drawing with 1:3:6 mix
using 20mm hard aggregate, as directed (Cost of concrete
work will be paid under relevant item seperately) -
211101 (a) For Removing Each 173.65
211102 (b) For Fixing / Re-erecting Each 269.48
1 of 3

211110 Removal of night soil from track (ballast profile and cess) in Track Metre 15.57
yard line / block section by manual or mechanical means and
dumping at indicated place outside the working area. This
item can be operated at locations where trackmen are to be
deputed for only track maintenance activities, as per
satisfaction to the site engineer in-charge
211120 Breaking the damaged PSC sleepers including dragging, if Each 202.76
required duly removing inserts and HTS wires safely and
handing over to Railways at Stores or Depot of SSE/P.Way,
including disposing the broken concrete pieces, as directed
211121 Deduction to Item no. 211120 for taking away HTS wire Each 120.00
(Steel) of one PSC sleeper by contractor
211130 Fixing vertically the unserviceable PSC sleepers at locations Each 112.28
of tress-passing, railway boundary or to make temporary
store by excavating trench, fixing PSC sleeper in trench and
filling back open trench
211140 Making Trolley Refuge of size 2.75m x 2.75m and placing Each 402.21
released unserviceable PSC sleepers at all four sides of
refuge (Earth-work to be paid separetely)
211150 Converting ordinary Broad Gauge ST Sleeper to Metre Each 166.41
Gauge / Narrow Gauge ordinary ST Sleepers as per standard
approved drawing by cutting, drilling, pressing to shape in
hydraulic press & finishing {released cut pieces shall be
deposited with Railway’s Stores, as directed}
211160 Converting ordinary Broad Gauge ST Turnout Sleeper to MG Each 649.03
/ NG Turnout ST sleeper as per standard approved drawing
by cutting, pressing to shape in hydraulic press, drilling holes
for loose jaws & rivets of slide chair, rivetting slide chair with
converted sleeper & finishing {released cut pieces shall be
deposited with Railway’s Stores, as directed}
211170 Supplying and fixing MS Sadle Plates for worn out seat of
CST-9 sleepers 165mm x 150mm, pressed into channel
shape suitably for fixing at rail seat in track -
211171 (a) 3mm thick plate Each 24.40
211172 (b) 4mm thick plate Each 30.50
211180 Supplying and spraying in specified proportion Weedicide Sq.metre 0.45
Chemical, capable to kill entire weed on track / cess /
embankment with all labour, material, tools & plants etc.
complete job in all respect. Scientific name of the chemical is
Isopropylamine Salt of Glyphosate, in which active ingredient
is Glyphosate (41%), colour is light amber to brownish, very
low in toxicity and has favourable enviremental
characteristics. It will be ensured that no weed growth occurs
upto six months period, otherwise respraying shall be done
by the contractor
2 of 3

211190 Supplying & applying single liquid solution of Henkel or
similar make Loctite Rail Safe in 250ml pack, having break
loose torque of 400Nm to 540Nm, as per ISO:10123 norms
with shear strength of liquid solutions as 25 to 35 N/mm2,
viscosity 1500 to 3000 (Centipoise) & specific gravity of 1.1 ±
0.05. for tightening of nuts & bolts at important locations, such
as Bridges, SEJs, Turnouts, Fish Plates, Steel Channel
Sleepers etc. Work includes opening of bolts, cleaning of
bolts with suitable cleaner and tightening of bolts after
applying Rail Safe, as directed by Engineer in-charge for -
211191 (i) Bolts dia. 20mm to 25mm Each 23.83

211192 (ii) Bolts dia. 26mm to 30mm Each 27.51
211193 (iii) Bolts dia. 31mm to 40mm Each 34.76
211200 Supplying & applying of Poly Chloroprene rubber-based
Solvent (toulene free, i.e. not harmful to human body) of
Henkel or similar make Loctite Track Safe to prevent working
out of rubber pads, having density 0.85±0.01 gm/cm3,
viscosity of solvent as 1500 to 1900 (centipoise) at 30
degree centigrade & shear strength 8 to 12 Kg/Sq.In. for
bonding rubber pads / GR Sole Plates on PSC sleepers
complete job, as directed by Engineer in-charge
211201 (a) PSC Line sleepers Each Rubber 21.30
Pad
211202 (b) 1 in 8½ Turnout Set Each Set 4604.60
211203 (c) 1 in 12 Turnout Set Each Set 6844.80
211204 (d) 1 in 8½ Switch Assembly Each Set 1151.53
211205 (e) 1 in 12 Switch Assembly Each Set 1497.30
211206 (f) 1 in 8½ Crossing Assembly Each Set 662.40
211207 (g) 1 in 12 Crossing Assembly Each Set 959.87
3 of 3

Ussr

Uploaded by

Copyright:

Available Formats

Ussr

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ussr

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF INDIA

S.No. Name of Chapter Chapter No.

2. Bridge Works Substructure 2.

3. Bridge Works Super structure 3.

4. Bridge Works Super structure- Steel 4.

5. Bridge Works- Misc. 5.

6. Rails, Sleepers, Fittings and Renewals 6.

7. Turnouts and Renewals 7.

8. Manual/Mechanised Screening and Ballast 8.

10. Reconditioning of Points & Crossings 10.

11. Formation & Rehabilitation 11.

12. Activities at Construction Sites 12.

13. Maintenance Activities 13.

14. Testing of Rails & Other Components 14.

15. Heavy Track Machines 15.

16. Small Track Machines 16.

17. Handling of Materials 17.

18. Level Crossings 18.

19. Bridge Related Activities 19.

20. Supply Items 20.

21. Miscellaneous Items 21.

CHAPTER - 1 : EARTH WORK

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

Item No. Description Of Item Unit Rate (Rs.)

CHAPTER - 2 : Bridge Works Substructure

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

023070 Providing and laying in position machine

Description of Item Cement

Description of Item Cement

Description of Item Cement

Description of Item Cement

025031 All types of bridge sub-structures, e.g. pier, sqm 523.29

025032 All types of bridge super-structures, e.g. slabs, sqm 680.51

Description of Item Cement

025041 Drilling 32mm dia. holes for jacketing / metre 127.44

CHAPTER - 3 : Bridge Works Super Structure- RCC

031010 Providing and laying in position Design Mix Cement

031021 Deduct for casting of Slab instead of Girder/Box Cum 567.06

031050 Providing and fixing in position of standard preformed

031061 For Span design load upto 100 MT Each 157792.97

031110 Providing and Laying only CE marked Knitted and PVC

031111 For Wall Height 1m to 4m Sqm 6722.69

031130 Fabrication of Precast Prestressed Concrete Structures

031240 Applying Epoxy Poly-sulphate Paint three coats on Sqm 269.00

CHAPTER - 4 : Bridge Works : Super Structure- Steel

Item No. Description Of Item Unit Rate (Rs)

Item No. Description Of Item Unit Rate (Rs)

041141 POT-PTFE Bearing MT Bearing 536.88