Quality Control

Quality control
What is IQC?
IQC is short for: Incoming material Quality Control: The factories, manufacturers have special QC
department, IQC to check the raw materials, components, and parts from their suppliers, before
admitting to the warehouse.
What is IPQC?
In Process Quality Control, they are monitoring assigned process, to make sure there won't massive
defective parts or components going into the next process. PQC (Process Quality Control) too.
What is FQC?
FQC is Final Product QC, they are supposed to check every piece of finished products before
proceeding to packing.
What is OQC?
OQC is the acronym Outgoing Quality Control, they are responsible for checking the finished with
packaging, using AQL sampling plan.
1) IQC
IQC stands for Incoming Quality Control, which refers to the quality confirmation and inspection of
purchased raw materials, components or products. That is, when the supplier sends the raw materials
or parts, the quality is inspected by sampling, and finally it is judged whether the batch of products is
accepted or returned. IQC is the first quality control checkpoint before product production. If the
unqualified product is put into the manufacturing process, it will lead to the unqualified process or the
final product, causing huge losses. Therefore, IQC not only affects the quality of the company's final
products, but also affects various direct or indirect costs. How we handle IQC is a three step process:
Incoming Materials Inspection. Involves confirming the inspection standards required for incoming
materials, and whether the materials meet these inspection standards. Separate good and bad products
in different lots in storage.
Handling Identified Quality Issues. During the inspection process, quality problems will be tracked
and dealt with immediately and quickly communicated back to the relevant departments. In order to
combat similar future problems, we propose solutions and establish preventive measures quickly, and
don’t avoid informing our clients about the current status in production. Material errors are not always
bad and can be turned into a positive outcome if handled openly and efficiently.
Feedback on Quality Issues. We look at the nature of Quality Problems and see if they are random
errors or systematic. We can always train our frontline staff to better inspect for random errors but if
systematic errors cause trouble, we can end up taking that specific supplier out of our vendor list.
2) IPQC
IPQC refers to the quality control implemented in the process from raw material production to product
packaging and storage (Hence why its called In-Process Quality Control). In this step, quality
inspectors will conduct random inspections on the product quality of each process, check the
operation methods and handling of the operators in each process, and check the contents of the control
plan. And the inspector will analyze the problems found in the inspection, propose improvement
countermeasures, and implement improvement strategies. The quality control of this process is mainly
to make the process production fully meet the quality requirements of the product. IPQC, being the
one with many inputs, makes up a 6-step process that involves:
Staff's Handling Procedures. Checking whether the operator wears proper work clothes, shoe covers,
finger cots when in contact with the PCBA and other sensitive processes.
Machinery and Tools Security Check. This one is quite self-descriptive.
Material Placement. Check whether the materials (incoming materials, defective, QC-passed products,
and products yet to be confirmed) are placed separately and easily identifiable. Confirm the placement
of the materials for faster processing (direction, placement in the workplace, how far down the
production line etc.)
Check Tools Handling. Check whether the operator works according to the requirements of the
workflow and whether the method the tools are used is correct.
Testing Methodology. Check and confirm whether the testing method is correct (confirm according to
the testing requirements), and whether the product passes the test.
Environment Control. Check and confirm whether the workshop environment is tidy and in
compliance with 5S (Sort, Set in Order, Shine, Standardize, Sustain)
3) FQC
FQC, or Final Quality Control is the act of comprehensively inspecting and testing the quality of the
product after all the processes are completed to before the product is put into storage. It is also the
final quality control work before the product is packaged or boxed. The quality control at this stage
mainly focuses on appearance inspection and performance inspection. For example, color, gloss,
roughness, burrs, whether there are scratches; physical or chemical properties of materials, electrical
properties, mechanical properties, operation control, etc. The purpose of the inspection at this stage is
to ensure that the product meets the shipping specifications and even meets the customer's
requirements (Fitness for Requirement). Therefore, product defects of different degrees (serious,
major, and minor levels) must be detected at this stage.
4) OQC
OQC, or Outgoing QC, refers to the shipment inspection carried out by the supplier in accordance
with the standards agreed by the contract or order between the supply and demand parties before the
finished product is shipped. The quality inspection at this stage mainly focuses on the packaging
status, anti-collision materials, product safety labels, accessories (Accessory Kits), user manuals,
product performance testing, outer box labels, etc., for comprehensive verification and confirmation.
The quality inspection method at the OQC stage is mainly based on sampling inspection. Of course,
for products with high unit prices or high grades, it is also very necessary to perform a full inspection
of the overall condition of the product in the OQC stage.
In the FQC and OQC phases, NexPCB mainly inspects and confirms:
Functional testing. Confirming that circuit boards are performing normally and clipping/pivoting
auxiliary parts are moving within the expected range.
Our QC staff performing functional testing on a PCB using a test jig.

Packing List confirmation. First, we make sure that the packing list is complete, and nothing that
doesn’t belong inside the product packaging goes inside it. We gently shake the boxes to check if
there are any loose parts. Our packaging QC staff confirms that the product manual, and the warranty
card is in neat condition, the language is correct, and the text is clear. After validating that the product
label specifications and dimensions are correct, the text is clear and the product accessories are
complete, with accurate specifications and quantities, we sign them off as passed.
Product Appearance. The PCB parts are complete (Confirmed with an optical test), and polarized
components are in the correct direction. The solder joints are smooth and clean, no visual indicators of
defective joints such as too little solder, missing solder, burns, and shorted pads.
Packaging Check. The packaging is the first aspect of the product your customers will see so it needs
to signal quality upfront. Checking that the printing on the packaging is correct, the colors follow your
Pantone specifications and the packaging is firm and undamaged, results in better quality handling.
And then there are functional check-ups related to packaging QC such as barcode and sticker
positions. Finally we confirm that the size and strength of the inner box and outer boxes are
acceptable so that your products will be safe and sound enroute.
As a company that provides intelligent hardware solutions for hardware start-ups that are working on
all sorts of previously unexplored solutions, NexPCB has always strives to provide its customers with
strict Quality Control services. After understanding your product requirements, and the manufacturing
steps involved, we tailor a QC strategy for your specific needs. We identify gamebreaker features that
your customers value the most and make sure that their quality is strictly controlled along the
production line. NexPCB can also help you devise a competitor QC strategy to see where they fall
short, so that you won’t have to.
However we should also inform you that there is no such thing as a perfect QC and quality is better
ensured within an acceptable threshold instead of giving every aspect of it zero tolerance. New
Product Introduction (NPI) is a process that requires smart use of limited project resources and a
limited time period to reach quantity targets. A zero-tolerance quality control outlook is at best a
perfectionist idea.
After we know your acceptable scrap rate, ppm requirements and such, we will map out the thresholds
in which your product quality can be maintained.
In this process, the electronic and structural engineers need to confirm the technical rationality of the
specifications and confirm the enforceability with the supplier. The QC staff needs to confirm the
enforceability in the factory. The experience of the production line workers also play a pivotal role in
detecting any non-obvious errors. Based on the above confirmation method, NexPCB verifies the
original reliability and durability requirements, formulates production attention points and key control
nodes, and complete quality standards for materials and finished products. The batch production
follows with the same emphasis on quality that you see in the first sample you receive.

Quality Control

Uploaded by

Copyright:

Available Formats

Quality Control

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Quality Control

Uploaded by

Copyright:

Available Formats

Quality control

Our QC staff performing functional testing on a PCB using a test jig.

You might also like