Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Pahlen

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Temperature control

MidiTemp
A compact unit for digital setting and view of temperature for operation and
control of heating products, both in already existing or new installations.
Control panel with on/off mode and programmable set value 5 - 45°C.

The controller has an input for external flow switch and/or


overheating limit control. 230V output for operating a wide range of heating
applications; heat exchangers, solar panels, electric heaters etc.

The controller will give a more precise temperature regulation


compared to an analogue thermostat. Built-in safety features for overheat
protection, flow switch for low pool circulation and alarm for temperatures
above 45°C. Provides a safe operation for both users and pool components.

Item no.
Electronic digital control panel
- Built-in safety features for overheat protection for temperatures above 45°C
128470 MidiTemp - Energy efficient
- Easy to set desired temperature
- Clear digits shows the pool temperature and the temperature set
- Indicates when heater is operating

Technical data
Power connection 220-240VAC 1~N 50Hz
Features
• Electronic control panel with LED
Max effect 230W
• Remote view and control
Sealing class IP44 • Precise temperature setting
• Controller output gives 230V (max 1A) to control a variety of
Dimensions L x W x H 170 x 50 x 160 mm
heating applications; e.g. pumps, contactors, valves etc.
Connection cabel 3 x 0,75 mm2, 1.5 m long • Length of sensorcabe 1400 mm
Switch on at 0.5°C under set temperature • Built-in protection and alarm against excessive temperature
or sensor failures
Switch off 0.5°C above set temperature
• Flow switch input with time-delayed output - heating aborted
Connections with alarm when reached low pool circulation
Control voltage 230 VAC 50Hz max 1A
Protection switches Potential free/dry contacts

Accessories
Item no.
14009100 Sensor well R1/2” L=70 mm
128604 Saddle clamp 63 x ½” PN10 PP
12870 Flow switch, external connection ½”
Sensor well/Saddle clamp Flow switch

Thermostat
For setting and automatic control of water temperature.
Item no. Temperature range Connection
12840 0-40°C R½”

Equipped with probe 160 mm.

33

You might also like