WK-3300

JUL. 2006

WK-3300

ELECTRONIC KEYBOARD
 CONTENTS

SPECIFICATIONS ----------------------------------------------------------------------------------------- 1
BLOCK DIAGRAM ---------------------------------------------------------------------------------------- 3
CIRCUIT DESCRIPTION --------------------------------------------------------------------------------- 4
PRINTED CIRCUIT BOARD ---------------------------------------------------------------------------- 6
DISASSEMBLY --------------------------------------------------------------------------------------------11
DIAGNOSTIC PROGRAM ----------------------------------------------------------------------------- 17
EXPLODED VIEW --------------------------------------------------------------------------------------- 20
PARTS LIST ----------------------------------------------------------------------------------------------- 21
SCHEMATIC DIAGRAMS ----------------------------------------------------------------------------- 25
 SPECIFICATIONS
GENERAL
Keyboard: 76 keys with touch response (OFF/1/2/3)
Tones: 400 Advanced Tones + 200 Preset Tones + 20 Drum Sets + 100 standard user tones
+ 20 user tones with waves*1 + 4 user drum sets with waves*1 + 50 drawbar organ
tones + 100 user drawbar organ tones (894 tones total); layer/split
Polyphony: 32 notes maximum (10 for certain tones)
Drawbar Organ Function
Drawbars: 9 (16’, 5 1/3’, 8’, 4’, 2 2/3’, 2’, 1 3/5’, 1 1/3’, 1’)
Percussion: Second, Third
Click: On, Off
Effects: DSP (200 types: internal, 100 user areas) + Reverb (16 types) + Chorus (16 types) +
Equalizer (10 types, 4 bands)
Auto Accompaniment
Rhythm Patterns: 182 (internal, 16 user areas*1 )
Tempo: Variable (226 steps, = 30 to 255)
Chords: 3 fingering methods (CASIO CHORD, FINGERED, FULL RANGE CHORD)
Rhythm Controller: START/STOP, INTRO/ENDING 1 and 2, VARIATION/FILL-IN 1 and 2, SYNCHRO/
FILL-IN NEXT
Accomp Volume: 0 to 127 (128 steps)
One-touch Presets: Recalls settings for tone, tempo, layer on/off, and harmonize on/off in accordance
with rhythm.
Auto Harmonize: 10 types : Automatic addition of notes that harmonize with melody note in accordance
with specified Auto Accompaniment chords.
Memory Function
Songs: 5
Recording Tracks: 6 (2 through 6 are melody tracks)
Recording Methods: Real-time, step
Memory Capacity: Approximately 10,000 notes (total for 5 songs)
Edit Function: Equipped
Demo Tunes: 3
Tune Number Name Composer
0 Island Dusk TECH-NOTE INTERNATIONAL LTD.
1 Malibu Sun TECH-NOTE INTERNATIONAL LTD.
2 Ticket to Cambridge TECH-NOTE INTERNATIONAL LTD.

Synthesizer Function
Parameters: Attack time; release time; resonance; cutoff frequency; vibrato type; vibrato delay;
vibrato depth; vibrato rate; octave shift; level; touch sense; reverb send; chorus send;
DSP line; DSP type; DSP parameter; Modulation Assign; Modulation Depth
Registration Memory
Number of Setups: 32 (4 setups ✕ 8 banks)
Memory Contents: Tone, Rhythm, Tempo, Layer on/off, Split on/off, Split point, Harmonize on/ off, Mixer
settings (Channels 1 to 10), Effect settings, Touch Response settings, Assignable
jack setting, Transpose, Tuning, Accompaniment volume setting, Pitch bend range,
Auto Harmonize type, MODE button setting, Synchro standby state, Mixer Hold, DSP
Hold, Synthesizer Mode parameters
Mixer Function
Channels: 16
Parameters: Tone; part on/off; volume; pan pot; octave shift; coarse tune; fine tune; reverb send;
chorus send; DSP line; DSP level, DSP pan, DSP system reverb send, DSP system
chorus send
MIDI: 16 multi-timbre receive, GM Level 1 standard

—1—
Other Functions
Pitch Bend Range: Adjustable (12 semitones upwards and downwards)
Modulation: Equipped
Transpose: 49 steps (–24 semitones to +24 semitones)
Tuning: Variable (A4 = approximately 440Hz ±100 cents)
LCD: Adjustable contrast
SMF Player: Flash memory storage for up to 200 files*1
Supported Format: SMF0
Flash Memory
Capacity: 4MB*2
Shared Area: Approximately 3.5MB*2 (waveform data, accompaniment data, SMF data)
Further storage of waveform, accompaniment, and SMF data becomes impossible
after the total of such data reaches approximately 3.5MB.
SD Memory Cards
Supported SD Memory Cards: 1GB or less (Cards with capacity greater than 1 GB are not supported.)
Functions: Save and load of user tones, user songs, and registration data; playback of SMF; card
formatting; file delete; file rename
Terminals
SD memory card slot
USB port: TYPE B
Sustain/Assignable Terminal: Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Headphone/Output Terminal: Stereo standard jack
Output Impedance: 200Ω
Output Voltage: 5.5V (RMS) MAX
Power Supply Terminal: 12V DC
Power Supply: Dual power supply system
Batteries: 6 D-size batteries
Battery Life: Approximately 4 hours continuous operation on alkaline batteries
AC Adaptor: AD-12
Auto Power Off: Turns power off approximately six minutes after last key operation. Enabled under
battery power only, can be disabled manually.
Speaker Output: 6.1W + 6.1W
Power consumption: 12V 18W
Dimensions: 122.3 ✕ 42.3 ✕ 16.0cm (48 3/16 ✕ 16 11/16 ✕ 6 5/16 inch)
Weight: Approximately 10.0kg (22.0 lbs) (without batteries)
1
* The same memory area is used to store waveform data, accompaniment data, and SMF data.
*2 Noted capacities are calculated values based on 1MB = 10242 bytes.

ELECTRICAL
Current drain with 12 V DC:
Consumption Current 1720 mA ± 20 %
Consumption Current at idle 290 mA ± 20 %
with 12 keys from F3 to E4 pressed in 479 Ocarinag + LAYER
Volume: maximum, Velocity: maximum

Speaker output level (Vrms with 8 Ω load each channel):

with key L(E1)/R(G1) in 479 Ocarinag
Volume: maximun, Velocity: maximum L: 5700 mV ± 20 %
R: 5670 mV ± 20 %

Phone output level (Vrms with 32 Ω load each channel):

with key L(C2)/R(B5) in 479 Ocarinag
Volume: maximun, Velocity: maximum L: 360 mV ± 20 %
R: 330 mV ± 20 %

Output level (Vrms with 47 KΩ load each channel):

with key L(E1)/R(G1) in 479 Ocarinag
Volume: maximun, Velocity: maximum L: 3100 mV ± 20 %
R: 3030 mV ± 20 %
—2—
 BLOCK DIAGRAM
Phones/Output SUB PCB (M740-PSA2)
LCD Controller
AC ADAPTOR
Assingnable Jack DC 12V ML9040-B02GA (IC401)
CONSOLE PCB
(M740-CNA3) CONT
E DB0 ~ DB7
LCD PCB
R/W
Speakers (M734-LCD1M) RS
(R)

(L)
Power Amplifier Battery
IC205 D214 D201
LA4636 APO

Main Power Supply Circuit

Volume Q201 ~ Q204,
IC201, D205, D206
CONSOLE PCB Filter
(M740-CNA2) IC202, NJM2008D
(9-12V) (5V) (5V) (5V) (9-12V) SUB PCB
LOUT ROUT VC VD5 VF5 VA5 VCP (M740-PSA1)

MAIN PCB
(M740-MDA1) DAC IC1
uPD63200GS

MA0 ~ MA20 FLASH ROM (32MBit)

Reset IC
RESET MPU IC11
IC6 MD0 ~ MD15 LH28F320BFHE
R1151N001C-TR
IC13

uPD914AGM-JED MA0 ~ MA21 ROM (128Mbit)

RAM (1Mbit) EA0 ~ EA15, EA18
IC10
IC5 MD0 ~ MD15 MR27T12800LO
CY62128DV30LL ED12 ~ ED19

16.384MHz
MA0 ~ MA16, MA25 RAM (2Mbit)
ARXD IC7
ATXD MD0 ~ MD7 LP62S2048X-70LLT/Q
ZX-BUSYB
SYSRSTB
BEND
MOD

SI0 ~ SI9, FI0 ~ FI9 KEY/BUTTON/SD CARD A1 ~ A17 RAM (128 x 16bit)
CONTROLLER IC23
IC20 LP62S16128BV
KC0 ~ KC7 TC190C020AF-001 D0 ~ D15

PWSW
KC3 ~ KC7

FI10, KI0 ~ KI2

RESB
TXDO Smart media Unit
TXDI
CONSOLE PCB
DSP
Keyboard (M740-CNA4)

CONSOLE PCB
DRAWBER CONSOLE PCB
(M740-CNA1)
BUTTON/LED (M740-CNA5)
Buttons
CONTROLLER
Keyboard PCBs SWIO ~ SWI7 IC301
(M764T-KY1M/ UPD65881GK-1019ETA DATA ACCESS CONSOLE PCB
SWCO ~ SWC6
KY2M) (M740-CNA6)

—3—
 CIRCUIT DESCRIPTION
KEY MATRIX
KC0 KC1 KC2 KC3 KC4 KC5 KC6 KC7
FI0 E11 F11 F#11 G11 G#11 A11 A#11
SI0 E12 F12 F#12 G12 G#12 A12 A#12
FI1 B11 C21 C#21 D21 D#21 E21 F21 F#21
SI1 B12 C22 C#22 D22 D#22 E22 F22 F#22
FI2 G21 G#21 A21 A#21 B21 C31 C#31 D31
SI2 G22 G#22 A22 A#22 B22 C32 C#32 D32
FI3 D#31 E31 F31 F#31 G31 G#31 A31 A#31
SI3 D#32 E32 F32 F#32 G32 G#32 A32 A#32
FI4 B31 C41 C#41 D41 D#41 E41 F41 F#41
SI4 B32 C42 C#42 D42 D#42 E42 F42 F#42
FI5 G41 G#41 A41 A#41 B41 C51 C#51 D51
SI5 G42 G#42 A42 A#42 B42 C52 C#52 D52
FI6 D#51 E51 F51 F#51 G51 G#51 A51 A#51
SI6 D#52 E52 F52 F#52 G52 G#52 A52 A#52
FI7 B51 C61 C#61 D61 D#61 E61 F61 F#61
SI7 B52 C62 C#62 D62 D#62 E62 F62 F#62
FI8 G61 G#61 A61 A#61 B61 C71 C#71 D71
SI8 G62 G#62 A62 A#62 B62 C72 C#72 D72
FI9 D#71 E71 F71 F#71 G71
SI9 D#72 E72 F72 F#72 G72

Note: Each key has two contacts, the first conatct 1 and second contact 2.

Key

FI
Second contact 2 First contact 1
KC
SI

NOMENCLATURE OF KEYS

E1 C2 C3 C4 C5 C6 C7 G7

—4—
BUTTON MATRIX
KI0 KI1 KI2 FI10
KC4 LAYER SPLIT AUTO HARMONIZE +
KC5 2 – 0 3
KC6 5 4 1 6
KC7 9 8 7 DEMO

SWI0 SWI1 SWI2 SWI3 SWI4 SWI5 SWI6 SWI7

ONE SYNCRO/
SWC0 ACCOMP TOUCH MODE INTRO/ INTRO/ VARIATION/ VARIATION/ FILL-IN
VOLUME PRESET ENDING 1 ENDING 2 FILL-IN 1 FILL-IN 2 NEXT
REGISTRATION/SONG MEMORY TRACK
SWC1 SONG TEMPO START/ BANK
MEMORY DOWN STOP 1 2 3 4

SWC2 CARD SMF TEMPO CH9 CH10 CH11 CH12 CH13

PLAYER UP

SWC3 CH1 CH2 CH3 CH4 CH5 CH14 CH15 CH16

SWC4 TRANCEPOSE/ MIXER SYNTH EFFECT CH6 CH7 CH8 1 FEET UP

FUNCTION

SWC5 1 FEET STORE EXIT 씱 쑿

DOWN

SWC6 RHYTHM TONE PIANO ORGAN DSP 씰 쑼

SETTING

—5—
 PRINTED CIRCUIT BOARD
MAIN PCB M740-MDA1

Top View

Bottom View

—6—
SUB PCB M740-PSA1

Top View

SUB PCB M740-PSA2

Top View

—7—
DISPLAY PCB M734-LCD1M

Top View

—8—
CONSOLE PCB M740-CNA1

CONSOLE PCB M740-CNA2 CONSOLE PCB M740-CNA3 CONSOLE PCB M740-CNA4 CONSOLE PCB M740-CNA5 CONSOLE PCB
M740-CNA6

CONSOLE PCB
M740-CNA7

—9—
KEYBORD PCB M764T-KY1M

KEYBORD PCB M764T-KY2M

— 10 —
 DISASSEMBLY
■ The Disassembly Procedure inscribed on this manual is exactly the same as that of
WK-3200 since WK-3300 has the same frame as WK-3200.
1. Remove the battery cover and then the battery.

2. Remove 36 screws and then the upper case.

3. Remove 4 screws, 8 speaker cords, 2 battery cords, 1cord (PM), 5 connectors (JD, JG2, JH, JK, JJ) and then the PCB ASS'Y (MA2M).
Connectors Cord Connector Screw

Battery cord (R)

Screw Battery cord (B)

Speaker Speaker cords (W)

cords (W)
Speaker cords (O)
Speaker
cords (O)

Screw Connectors Screw

Screws

— 11 —
4. Remove 5 screws, 5 connectors (JA, JB, JD, JE, JF) and then the PCB ASS'Y (MA1M).
Connectors Connectors

Screws

5. Remove 8 screws, 1 connector and then the LCD ASS'Y (LCD1M).

Screws

Connector

Screws

2 5 8 1

3 6 7 4

Note: Tighten the screws in the order from 1 to 8 when

reassembling.

— 12 —
6. Remove the volume knob, screws, connectors and then the CN1, CN2, CN3, CN4, CN5, CN6, CN7.

Volume knob

Screws Connector

CN3M

CN7M CN2M CN6M CN1M CN5M CN6M

CN1M CN2M CN3M

CN4M CN5M CN6M CN7M

— 13 —
7. Remove 2 screws and then the Bender assy.

Screws

8. Remove 29 screws and then the lower case.

Note: Tighten the screw with the arrow mark in the figure first when reassembling.

— 14 —
9. Remove 24 screws and then the PCB ASSY (KY1M, KY2M).

10.Remove the rubber keys.

Projection

Note: Pay attention to the positions of the rubber keys as one of them has a different length.
Match the projections of the rubber keys with the holes of the lower case when reassembling.

— 15 —
11.Remove 27 screws and then the white keys.

Note: Pay attention to the positions of the screw holes when

reassembling.

12.Remove the black keys.

— 16 —
 DIAGNOSTIC PROGRAM
■ Initial Setup
1. Connect an AC adaptor.
2. Connect a Sustain pedal.
3. "Main" volume: MAX.
4. Insert the SD card.
■ How to start diagnostic program
1. Press the “POWER” button while pressing the “Cursor key Up” and “Cursor key Down” buttons.
2. Release the “POWER” button first while still pressing the “Cursor key UP” and “Cursor key Down” buttons.
3. Release the “Cursor key UP” and “Cursor key Down” buttons. “TEST 740” appears on the LCD.
NOTE: Refer to the figure below for the LCD messages that appear during the diagnostic program.
3 2 4 1 5

G r a n dPn o

E
D C B A 0 9 8 7 6

■ Diagnostic program
1. Button check
1 Press “DSP” button.
2 Press buttons in the following order.
NOTE: NG sound sounds when a button is defective or buttons are pressed in a wrong order.
LCD message appears in the area 1.
Message on LCD Message on LCD Message on LCD Message on LCD
1 DSP I REGISTRATION 3 REGIST 3 [ CH10 CH10 n EXIT EXIT
2 MODULATION MOD J REGISTRATION 4 REGIST 4 \ CH11 CH11 o AUTO HARMONIZE HARMO
3 MODE MODE K STORE STORE ] CH12 CH12 p SPLIT SPLIT
4 ONE TOUCH PRESET OTP L TRANSPOSE/FUNCTION TRN/FUNC _ CH13 CH13 q LAYER LAYER
5 CARD CARD M MIXER MIXER a CH14 CH14 r0 0
6 ACCOMP VOLUME ACMP VOL N SYNTH SYNTH b CH15 CH15 s1 1
7 SONG MEMORY SONG O EFFECT EFFECT c CH16 CH16 t4 4
8 INTRO/ENDING 1 INT/END1 P SMF PLAYER SMF d DSP CH DSP CH u7 7
9 INTRO/ENDING 2 INT/END2 Q CH1 CH1 e DRAWBAR ORGAN DRAWBAR v8 8
@ VARIATION/FILL-IN 1 VAR/FIL 1 R CH2 CH2 f TONE TONE w5 5
A VARIATION/FILL-IN 2 VAR/FIL 2 S CH3 CH3 g RHYTHM RHYTHM x2 2
B SYNCHRO/FILL-IN NEXT SYNCHRO T CH4 CH4 h DSP DSP y- -
C START/STOP STRT/STP U CH5 CH5 i PIANO SETTING PIANO z+ +
D TEMPO쑼 TEMPO/DW V CH6 CH6 j [CURSOR BUTTONS] {3 3
E TEMPO쑿 TEMPO/UP W CH7 CH7 UP UP |6 6
k RIGHT RIGHT
F BANK BANK X CH8 CH8 }9 9
l DOWN DOWN
G REGISTRATION 1 REGIST 1 Y 1Ft UP 1Ft UP ~ DEMO DEMO
m LEFT LEFT
H REGISTRATION 2 REGIST 2 Z CH9 CH9 SW OK

L
M f
1h i
N g
3 O ~
2
4 5 QRSTUVWXY j u v }
P e m k
6 7 Z[\]^abcd l t w |
n
s x {
8 9 0 A B C D E F G H I J K o p q r y z

— 17 —
 2. AC adaptor detection check. Message on LCD
1 Press “TONE” button. 1 ACJ ON
2 When the instrument detects that an AC adaptor is plugged in, an OK sound
sounds. “ACJ OFF” appears and an NG sound sounds when the AC adaptor
is not plugged (when batteries are used).

3. Sustain jack check. (If no pedal, this check can be skipped)

1 Press “RHYTHM” button. 1 SUS CHK
2 Press “Sustain pedal” . 1 SUS ON
3 Release “Sustain pedal” . 1 SUS OFF
4 NG sound, “OFF” sound this case, must be audible.

4. Low Voltage detection check.

1 Press “DRAWBAR ORGAN” button. 1 VOLT HI
2 OK sound must be audible.

5. Sound Source check

1 Press “7” button. 1 TG MAX L
2 The MAX sin sound sounds from Left spesker.
3 Press “8” button. 1 TG MAX C
4 The MAX sin sound sounds from Both spesker.
5 Press “9” button. 1 TG MAX R
6 The MAX sin sound sounds from Right spesker.

6. ROM check
1 Press “INTRO/ENDING1” button. 1 ROM CHK
앗
1 ROM OK

7. Flash memory check

1 Press “INTRO/ENDING2” button. 1 FMC CHK
앗
1 FMC OK

8. Flash memory SUM check

1 Press “SONG MEMORY” button. 1 FMS CHK
앗
1 FMS 7898

9. DSP RAM check

1 Press “VARIATION/FILL-IN 2” button 1 DRAM OK

10. CPU RAM check

1 Press “SYNCHRO/FILL-IN NEXT” button. 1 CRAM OK

— 18 —
 Message on LCD
11. LED check
1 Press “TEMPO쑼” button. 1 LED CHK
2 LEDs illuminate in the following order. 앗
MODULATION 앗
FULL RANGE CHORD 앗
FINGERED 앗
CASIO CHORD 앗
DATA ACCESS 앗
DRAWBAR ORGAN 앗
DSP 앗
1 LED END
12. LCD check
1 Press “TEMPO쑿” button.
2 Turn on all segments of the LCD.

13. Card check (If no smart media card, this check can be skipped)
1 Press “-” button. 1 SMC CHK
“Err NO CARD” appears and an NG sound sounds when no card is inserted. 앗
1 CARD OK

14. Bender check

1 Press “MODE” button. 1 BEND CHK
2 Turn the “PITCH BEND WHEEL” to MAX. 2 127
1 BEND CHK
3 Turn the “PITCH BEND WHEEL” to MIN. 2 000
1 BEND OK

15. TUNE check (If no TUNING METER, this check can be skipped)
1 Connect the TUNING METER to the phone jack.
2 Press “8” button.
3 The TUNING METER must indicate "C".
4 Disconnect the TUNING METER from the phone jack.

16. APO check

1 Press “EXIT” button. 1 Exiting
* Go out from TEST mode (Power off).
* The LCD turns off.

DIAGNOSTIC PROGRAM IS FINISHED.

— 19 —
 EXPLODED VIEW
17 16 40

19

18

37 26 3
26 38
33 36
3 28 29 30
32
26
25 39 34 35
31
3
27
20 23 22
19 18
21

4-1
24 4-2 4
41-4
41-2
41-3 1
41-1

41

PSA1
15 13
2
PSA2

11

6
43
12
42
5
14 43
9

7
8
10

— 20 —
 PARTS LIST

WK-3300

Notes: This parts list does not include the cosmetic parts,
which parts are marked with item No. "R-X" in the
exploded view.
Contact our spare parts department if you need
these parts for refurbish.
1. Prices and specifications are subject to change
without prior notice.
2. As for spare parts order and supply, refer to the
"GUIDEBOOK for Spare parts Supply",
published seperately.
3. The numbers in item column correspond to the
same numbers in drawing.

— 21 —
 Price
N Item Code No. Part Name Specification Overs R Remarks
Code
Main PCB MA1M
N 1 10248134 PCB ASSY/MAIN TK-RJM507144*001 1 DT A
IC2 10197796 IC TA75S393F(TE85L.F) 1 AL C
IC4 10197802 IC TC74VHCT08AFT(EL.K 1 AE C
IC5 10198126 LSI CY62128DV30LL70ZAX 1 BN C
N IC6 10241413 IC R1151N001C-TR-F 1 AE C
IC7 10197390 LSI LP62S2048AX70LLTFQ 1 AY C
IC8,9,21,22 10197555 IC TC7SZ14FU(TE85L.F) 4 AE C
IC13 10200257 IC UPD914AGM-JED-A 1 CH C
IC15 10197809 IC TC7WH123FU(TE12L.F 1 AE C
N IC19 10239682 IC RH5RL33AA-T1-F 1 AB C
N IC33 10240648 IC TC74LCX08FT(EL.K) 1 AE C
IC35 10197798 IC TC74LCX138FT(EL.K) 1 AI C
N IC36 10245659 IC TC7WZ00FU(TE12L.F) 1 AF C
N IC37 10245660 IC TC7WZ08FU(TE12L.F) 1 AG C
Q3 10197813 TRANSISTOR 2SD2150T100R 1 AE C
Q1,2 69300298 TRANSISTOR 2SC4081T106R 2 AA C
Q4,5 10015566 TRANSISTOR 2SB1181TLR 2 AC C
D1 10199220 DIODE HZU4.3B2TRF-E 1 AB C
D2 23902058 DIODE 1SR154-400TE25 1 AA C
D3-7 10009218 DIODE 1SS400TE61 5 AA C
N L3 10214942 COIL BLM21PG331SN1D 1 AA C
L1,2,5-
9,27,28 10095204 COIL BLM18AG102SN1D 9 AA C
L26 10158809 COIL DLP31SN221SL2L 1 AI C
L4 10122963 COIL BLM21AG102SN1D 1 AC C
L24,25 10089941 COIL BLM21PG221SN1D 2 AA C
Q6 10153685 FET 2SJ346(TE85L.F) 1 AA C
F6,7,8 10122975 R-C NETWORK EZASSB516BJ 3 AA C
F1,2,4,5,9-13 10122976 R-C NETWORK EZASTB63ABJ 9 AA C
X2 10208977 RESONATOR SSM1638400F16FSFZ8 1 AC C
X3 10211946 RESONATOR SSM1200000F17F5FZ8 1 AC C

Sub PCB MA2M

N 2 10248136 PCB ASSY/PSA TK-RJM507145*001 1 CL B
IC201 10201503 IC PQ1CG21H2FZH 1 AO B
IC202 10206677 IC NJM2068D-D 1 AH B
IC205 10203081 IC LA4636-E 1 AV B
Q201,203,
10206673 TRANSISTOR KTC3199-GR-AT/P 4 AA C
204,205
D201,202,20
10209003 DIODE 1N5822-F100 4 AB
6,214
Q202 10206675 TRANSISTOR KTA1273-Y-AT/P 1 AA C
D203 10108141 DIODE 1SS133TP 1 AA C
D205 10115969 DIODE DZ5.6BSBTP 1 AA C
J201 10208247 JACK/DC DJ-0702B*019 1 AA C
J204 10206815 JACK JY-6314*01-030 1 AA C
L201,202,20
10206680 COIL R2318-RB53856397NP 4 AA C
6,207
L203 10208248 COIL R187-860400NP 1 AC C

Notes : Q - Quantity per unit

R - Rank

- 22 -
 Price
N Item Code No. Part Name Specification Overs R Remarks
Code
Console PCB CN1M~CN7M
CNA1~
N 3 10248138 PCB ASSY/CNA TK-RJM507146*001 1
CNA7
IC301 10159709 LSI UPD65881GK-1019ETA 1 B
Q301, 304,
10209017 TRANSISTOR KTA1267-GR-AT/P 3 C
305
D305-322 10108141 DIODE 1SS133TP 18 C
D302-304 10122219 LED 1154GD-B5/9-90 3 AD C
D301 10123009 LED 1154HD-B5/8-90 1 C
L303 10206672 COIL R2318-RB53856396NP 1
N L301, 302 10210717 FERRITE BEAD BB36-851665NP 1 C
X301 10093909 OSCILLATOR/CERAMIC CSBLA1M00J58-B0 1 C
VR301 10123103 VARIABLE RESISTOR RK09K12C0D1B 1 AH C
J301 36120665 JACK/PHONE YKB21-5006 1 C
N D324, 325 10221285 LED SDPB3DD0C100DEFGHI 2 C
D328, 329 10123006 LED 1154GD-B5/4.5-90 2 AD C
D323 10123008 LED 1154GD-B5/8-90 1 AD C

BL assy
4 10123292 BACK LIGHT ASSY TK-RJM503021*001 1 BW B
4-1 10123033 REFLECTOR RJM502534-001V01 1 AD C
4-2 10123302 PCB ASSY/LCD1M TK-RJM502995*001 1 BO B
IC401 10006502 LSI ML9040-B02GA 1 AU B
IC402 10122996 IC TC74HCT08AF(EL) 1 AB B

Key board assy

5 69222720 KEY SET/LT WHITE M312118*1 5 AP C
6 69237900 KEY SET/LT76R WHITE M340231*1 1 AO C
7 69237910 KEY SET/LT76L WHITE M340230*1 1 AO C
8 69068482 KEY SET/LS BLACK M140369B-3 2 AM C
9 10025058 KEY SET/LSK-8P BLACK M140369-8 1 AH C
10 10025059 KEY SET/LSK-3P BLACK M140369-7 1 AN C
11 10025055 RUBBER/CONTACT CB M241297-1 5 AJ C
12 10025054 RUBBER/CONTACT EB M241298-1 1 AH C
13 10025060 RUBBER/CONTACT CG M241299-1 1 AH C
14 10123289 PCB ASSY/KY1-2M TK-RJM503000*001 1 BT B
D801~D952 23153132 DIODE 1SS133T-77 152 AA C

Notes : Q - Quantity per unit

R - Rank

— 23 —
 Price
N Item Code No. Part Name Specification Overs R Remarks
Code
Case Unit
15 10200667 COVER/BATTERY TK-M341288*003 1 AX C
N 16 10247812 PLATE/DISPLAY RJM502476-007V01 1 C
N 17 10247808 KNOB/RTR M341109-007V01 1 C
N 18 10232709 SPEAKER C12JA26 2 C
N 19 10228235 SPEAKER C05JH59 2 C
20 10197776 LCD TR4194N 1 BO C
21 10122917 PLATE/BACK LIGHT RJM502475-001V01 1 AP X
22 10122970 FILM RJM502473-001V01 1 AA X
23 10081190 PIECE/TOP RJM501982-001V01 2 AA X
24 10122965 CONNECTOR RJM502474-001V01 2 AI C
25 10200666 BENDER ASSY TK-M340804*009 1 BU C
N 26 10247814 RUBBER/KEY/A RJM502517-007V01 3 C
N 27 10247816 RUBBER/KEY/B RJM502518-006V01 1 C
N 28 10247818 RUBBER/KEY/C RJM502519-006V01 1 C
N 29 10247820 RUBBER/KEY/D RJM502520-005V01 1 C
N 30 10247821 RUBBER/KEY/E RJM502521-006V01 1 C
N 31 10247822 RUBBER/KEY/F RJM502522-007V01 1 C
N 32 10247824 RUBBER/KEY/G RJM502523-007V01 1 C
N 33 10247826 RUBBER/KEY/H RJM502524-004V01 1 C
N 34 10127788 RUBBER/KEY/J RJM502525-001V02 1 C
N 35 10247827 RUBBER/KEY/K RJM502526-006V01 1 C
N 36 10247880 RUBBER/KEY/L RJM502527-006V02 1 C
N 37 10247886 RUBBER/KEY/M RJM502870-006V01 1 C
N 38 10247882 RUBBER/KEY/N RJM502529-006V01 1 C
N 39 10247884 RUBBER/KEY/P RJM502530-006V01 1 C
N 40 10248137 CASE SUBASSY/UPPER TK-RJM506673*001 1 X
N 41 10200669 CASE SUBASSY/MIDDLE TK-M141081*011 1 DE X
41-1 10036658 SPRING/BATTERY/(+) M441101A-1 1 AA X
41-2 10036659 SPRING/BATTERY/(-) M441102A-1 1 AC X
41-3 10036660 SPRING/BATTERY M441099A-1 2 AC X
41-4 10036661 SPRING/BATTERY M441100A-1 2 AC X
42 10025065 PLATE/LOWER/A M341268-1 1 AM X
43 10025066 PLATE/LOWER/B M241302-1 2 AP X

Accessary
N - 10229891 AC ADAPTOR AD-12UL-TC3(D) 1 C For US
N - 10247805 STAND/MUSIC M141071-006V01 1 X
Except
- 10055632 BATTERY GP13A0-9S2 3 BG C
EU/US
N - 10247806 LABEL/RATING M341007-062V01 1 X
N - 10248108 CD ROM IDES50CDROMWL1A 1 C

Notes : Q - Quantity per unit

R - Rank

— 24 —
 SCHEMATIC DIAGRAMS
MAIN PCB M740-MDA1 (1/2)

— 25 —
MAIN PCB M740-MDA1 (2/2)

— 26 —
SUB PCBs M740-PSA1/PSA2

— 27 —
CONSOLE PCB M740-CNA1

— 28 —
CONSOLE PCBs M740-CNA2/CNA3/CNA4/CNA5/CNA6/CNA7

— 29 —
DISPLAY PCB M734-LCD1M

— 30 —
KEYBORD PCBs M764T-KY1M/KY2M

— 31 —
CASIO COMPUTER CO.,LTD.
Overseas Service Division

6-2, Hon-machi 1-Chome

Shibuya-ku, Tokyo 151-8543, Japan