Comp. A GR
Comp. A GR
Comp. A GR
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.3. Details of the supplier of the safety data sheet
Supplier Akis Paint and Chemical Inc.
Ali Osman Sönmez Cad. No:4
DOSAB-BURSA/TURKEY
T: +902242610537
F:+902242610542
www.akisboya.com
Contact person Tolga Dıraz - Teknik Müdür, Resmiye Kovancı Savaş - Fabrika Müdürü, H.Tuğba Başkurt
Fildişi - Kalite Güvence Sorumlusu
Health hazards Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Skin Sens. 1 - H317 Repr. 1B - H360FD STOT RE 2 -
H373
Pictogram
1/10
Revision: 0 Supersedes date: 24/08/2016
3.2. Mixtures
Classification
Acute Tox. 4 - H312
Skin Irrit. 2 - H315
Eye Irrit. 2 - H319
Skin Sens. 1 - H317
Aquatic Chronic 2 - H411
Classification
Flam. Liq. 3 - H226
Acute Tox. 4 - H312
Acute Tox. 4 - H332
Eye Irrit. 2 - H319
Skin Sens. 1A - H317
Classification
Repr. 1B - H360FD
2/10
Revision: 0 Supersedes date: 24/08/2016
xylene 5-10%
CAS number: 1330-20-7 EC number: 215-535-7
Classification
Flam. Liq. 3 - H226
Acute Tox. 4 - H312
Acute Tox. 4 - H332
Skin Irrit. 2 - H315
Quartz 5-10%
CAS number: 14808-60-7
Classification
STOT RE 1 - H372
Classification
Flam. Liq. 3 - H226
STOT SE 3 - H335, H336
Asp. Tox. 1 - H304
Aquatic Chronic 2 - H411
The full text for all hazard statements is displayed in Section 16.
Inhalation If it is suspected that volatile contaminants are still present around the affected person, first
aid personnel should wear an appropriate respirator or self-contained breathing apparatus.
First aid personnel should wear appropriate protective equipment during any rescue. If
spray/mist has been inhaled, proceed as follows. Remove person to fresh air and keep
comfortable for breathing. Maintain an open airway. Rinse nose and mouth with water.
Consult a physician for specific advice. Keep affected person warm and at rest. Get medical
attention if symptoms are severe or persist.
Ingestion Rinse mouth thoroughly with water. Do not induce vomiting. Never give anything by mouth to
an unconscious person. Get medical attention.
Skin contact Remove affected person from source of contamination. Remove contaminated clothing
immediately and wash skin with soap and water. Get medical attention if any discomfort
continues.
Eye contact Remove affected person from source of contamination. Remove contact lenses, if present and
easy to do. Continue rinsing. Remove any contact lenses and open eyelids wide apart.
Continue to rinse for at least 15 minutes and get medical attention.
Protection of first aiders Wash contaminated clothing thoroughly with water before removing it from the affected
person, or wear gloves. First aid personnel should wear appropriate protective equipment
during any rescue.
3/10
Revision: 0 Supersedes date: 24/08/2016
4.2. Most important symptoms and effects, both acute and delayed
Inhalation The product contains organic solvents. Toxic if inhaled.
Ingestion This product is corrosive. Liquid irritates mucous membranes and may cause abdominal pain
if swallowed. May cause chemical burns in mouth and throat.
Eye contact Redness. Conjunctivitis, irritation, tearing. May cause chemical eye burns.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
Specific treatments No specific chemical antidote is known to be required after exposure to this product.
Special protective equipment Use air-supplied respirator, gloves and protective goggles.
for firefighters
4/10
Revision: 0 Supersedes date: 24/08/2016
Advice on general Take off contaminated clothing. Promptly remove any clothing that becomes wet or
occupational hygiene contaminated. Remove contaminated clothing and wash the skin thoroughly with soap and
water after work. Contaminated clothing should be placed in a closed container for disposal or
decontamination. Good personal hygiene procedures should be implemented. Provide
eyewash station. Do not eat, drink or smoke when using this product.
Protective equipment
Appropriate engineering As this product contains ingredients with exposure limits, process enclosures, local exhaust
controls ventilation or other engineering controls should be used to keep worker exposure below any
statutory or recommended limits, if use generates dust, fumes, gas, vapour or mist.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible.
Other skin and body Wear appropriate clothing to prevent any possibility of liquid contact and repeated or
protection prolonged vapour contact.
Hygiene measures Wash hands and any other contaminated areas of the body with soap and water before
leaving the work site. Clean equipment and the work area every day.
5/10
Revision: 0 Supersedes date: 24/08/2016
Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible.
Thermal hazards If there is a risk of contact with hot product, all protective equipment worn should be suitable
for use with high temperatures.
Environmental exposure Emissions from ventilation or work process equipment should be checked to ensure they
controls comply with the requirements of environmental protection legislation.
Colour Grey.
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
Skin corrosion/irritation
Skin corrosion/irritation Irritating to skin.
6/10
Revision: 0 Supersedes date: 24/08/2016
Respiratory sensitisation
Respiratory sensitisation No information available.
Skin sensitisation
Skin sensitisation No information available.
Carcinogenicity
Carcinogenicity No information available.
Reproductive toxicity
Reproductive toxicity - fertility May damage fertility. May give damage to unborn child
Aspiration hazard
Aspiration hazard May be harmful if swallowed and enters airways.
Inhalation The product contains organic solvents. May cause drowsiness or dizziness.
Ecotoxicity Dangerous for the environment. The product contains volatile organic compounds (VOCs)
which have a photochemical ozone creation potential. May cause long lasting harmful effects
to aquatic life. The product may have adverse effects on organisms in soil and water.
12.1. Toxicity
Toxicity No effects known.
BCF
7/10
Revision: 0 Supersedes date: 24/08/2016
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority. Confirm disposal procedures with environmental engineer and
local regulations. Product residues retained in emptied containers can be hazardous.
14.1. UN number
UN No. (ADR/RID) 1263
Proper shipping name (IMDG) PAINT (CONTAİNS reaction product: bisphenol-A-(epichlorhydrin), Low boiling point naphtha
- unspecified)
ADR/RID label 3
IMDG class 3
ICAO class/division 3
ADN class 3
Transport labels
8/10
Revision: 0 Supersedes date: 24/08/2016
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU legislation Commission Decision 2000/532/EC as amended by Decision 2001/118/EC establishing a list
of wastes and hazardous waste pursuant to Council Directive 75/442/EEC on waste and
Directive 91/689/EEC on hazardous waste with amendments.
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Key literature references and This SDS has been created as a result of observations, measurements on the product related
sources for data to the product and the data that raw material suppliers provide
Issued by Mr. Tolga DIRAZ - Certified SDS Author - Certificate No: 01.40.08/06.03.2015 /
tdiraz@iyigullu.com.tr / +90 224 261 05 37
Revision 0
9/10
Revision: 0 Supersedes date: 24/08/2016
This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
10/10