Electronic Components

Electronic Components
2020/2021
Passive Components
Optoelectronics
Power Modules
REDEXPERT
REDEXPERT. The online platform of Würth Elektronik to select

electronic and electromechanical components.
#REDEXPERT
nline platform based on measured values
O A bility to compare inductance/current
The world’s most accurate AC-loss model and temperature rise/DC current using
Filter settings for over 20 electrical and interactive measurement curves
mechanical parameters Available in seven languages
Inductor simulation and selection for No login required
DC/DC converters Order free samples directly
Direct access to product datasheets www.we-online.com/redexpert
Content
1 PASSIVE COMPONENTS
EMC Components 12
Power Magnetics 53
Signal & Communications 77
Quartz & Oscillators 99
Capacitors 112
Resistors 138
2 OPTOELECTRONICS
151
3 POWER MODULES
172
Terms of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Information in this publication is subject to change. The process of continually impro-
ving our product range leads to changes in content. For new designs please refer to the
latest data sheets on www.we-online.com or contact our technical field staff.
10/20 Würth Elektronik eiSos® 3

The Würth Elektronik eiSos Group
The Würth Elektronik Group Employees: 7,300

Sales: 822 Mil. Euro
Würth Elektronik eiSos Group

Printed Circuit Boards
Intelligent Power and

Control Systems
Passive Power Modules & Electromechanical Automotive & Wireless Connectivity &
Components Optoelectronics Components eMobility Sensors
Würth Elektronik eiSos GmbH & Co. KG Würth Elektronik eiSos GmbH & Co. KG Würth Elektronik eiCan Würth Elektronik eiSos GmbH & Co. KG Würth Elektronik eiSos GmbH & Co. KG
Würth Electronics Midcom Inc. Würth Elektronik Stelvio Kontek S.p.A. Würth Elektronik iBE GmbH (former AMBER wireless GmbH)
IQD Frequency Products Ltd. Erwin Büchele GmbH & Co. KG
Globally available. Locally present.

Nurmijärvi (Finland)
Budweis (Czech Republic)
Berlin (Germany)
Munich (Germany)
Esslingen (Germany)
Trier (Germany)
Waldenburg (Germany)
Nashua (USA)
Crewkerne (UK)
Thyrnau (Germany)
Watertown (USA) Shenyang (China)
Lyon (France)
Milpitas (USA) Seoul (South Korea)
Barcelona (Spain) Tianjin (China)
Plano (USA) Oggiono (Italy)
Fuling (China)
Tab (Hungary)
Taichung (Taiwan)
Irapuato (Mexico)
Blaj (Romania) Longgang (China)
Belozem (Bulgaria) Bangalore (India) Tongzi (China) Hong Kong (Hong Kong)
Nakhon Ratchasima (Thailand)
SALES OFFICE
PRODUCTION
DISTRIBUTION
QUALITY & DESIGN CENTER
WAREHOUSE
4 Würth Elektronik eiSos® 10/20

more than you expect
SAY YES TO OUR FAST AND COST-FREE WE TAILOR THE

DESIGN-IN SUPPORT QUANTITIES TO YOUR NEEDS
ALL CATALOGUE PRODUCTS RE-REELING

AVAILABLE EX STOCK SERVICE
DESIGN SEMINARS AND ONLINE DESIGN PLATFORM FOR

WEBINARS FREE OF CHARGE COMPONENT SELECTION & SIMULATION
DESIGN KITS WITH LIFELONG REFERENCE DESIGNS OF

FREE REFILL LEADING IC MANUFACTURES

Alpha-Rack
The flexible rack system for EMI solutions and smart prototyping
αRack
The Alpha-Rack system offers a huge variety of electronic and electro- Fast & easy access to components
mechanical components. It is based on individual modules that can be Technical data at a glance
assembled in different configurations. Choose from our predesigned Stockable, combinable and modular expandable
modules or create your own individual rack. Lifelong free refill
Configurations:
Predesigned module Empty module Wall bracket Rotating tower with one, two or three levels
Get more information:

www.we-online.com/rack

Global Technology Partnerships eMotorsports:
Formula E as a Driving Innovative Force
Wurth Elektronik eiSos is one of the leading manufacturers of electronic and electromechanical
components for the electronics industry. We are convinced that eMobility is the engine of the
future. Better than any alternative, it stands for conserving resources, green efficiency, sustain-
ability and ecology. The Formula E Racing Team of Audi Sport ABT Schaeffler is our perfect
technology partner.
www.we-speed-up-the-future.com

Total Quality Management
Quality and Laboratories
1 4 Quality Centers Worldwide
Waldenburg, Germany Lyon, France
Shenzhen, China Watertown, USA
2 Test Equipment
A nalysis Lab – Microscopic Analysis, Thermal Strength Wetting

Balance, RoHS Reflow Parts, XRF X-Ray and many more
Measurement Lab – Precision LCRs, ESD Testers, RF Impedance /
Material Analyzer, Network / Spectrum / Impedance Analyzers and
many more
Environmetal Lab – Shock and Vibration, Temperature Cycling,
Thermal Shock, Steam Aging and many more
Process Lab – Reflow, Wave and Vapor phase soldering, Pick and
Placing simulations, washing process, Tape- and Reeling and
many more
EMC Lab – Fully anechoic chamber and shielded rooms, Radiated
emission measurements, Radiated immunity tests, Automotive
monopole testing, electrical voltage tests, burst and surge test,
ESD test
3 Process and Product Quality
We work with the common quality methods like:

Quality system with PDCA-Cycle
Risk prevention with FMEA-Process
Quality planning with APQP & PPAP
Complaint handling with 8D-method
Change management with PCN / PTN
FiFo with lot no & date code traceability
Functional component and product qualifications

Environmental and Energy Management
4 Material Compliance
As one of the leading manufacturers of electronic components

worldwide, we are fully conscious of our responsibility for the
environment and its protection. That’s why we comply with the
following laws regarding material compliance:
RoHS directive 2011 / 65EU and 2015 / 863 / China RoHS
REACh-regulation no 1907 / 2006
Conflict Mineral Reporting [CMRT]
End-of Life Vehicles directive 200 / 53EC and 2005 / 64 / EC
California Proposition 65
Persistent Organic Pollutants (POPs)
Ozone Depleting Substances (ODS)
We continuously work on the reduction

of RoHS Exemptions and REACh SVHC.
We also test our products according the two common Halogen Free
standards and it’s our target to reduce halogens to a minimum.
Halogen free products are labeled with one or both of the following
standards:
Halogen Free JEDEC JS 709B
Halogen Free IEC 61249-2-21
5 Our Ecology Projects
The WE eiSos contributes to the preservation of the environment for

future generations and commits to the international climate
protection goals. That’s why we support several projects regarding
sustainability and ecology.
More about quality and

Monitoring of energy consumption
environment management:
Photovoltaics for renewable energy
www.we-online.com/quality
E-car & E-bike charging stations
Reduction of plastic in our packaging
WEBee – Bee colonies at our headquarter
Certifications and more to download:
www.we-online.com/certifications

Outstanding Design Support
Trilogy of Magnetics Abc of Capacitors

5th Edition Basic Principles, Characteristics
and Capacitor Types
The Trilogy covers a multitude of new components and applications. Over 200 practical
examples for audio, filter and video circuits, interfaces, motor control units, SMPS, line Order Code:
filter and power supply. English version: 744 013
German version: 744 012
Order Code:
English version: 744 006
Further information and

free extracts on
www.we-online.com/trilogy
Trilogy of Connectors
3rd Edition:
Basic Principles and Connector
Design Explanations
Order Code:
English version: 699 004
Trilogy of Wireless Power Transfer Abc of Power Modules The LT Spice IV Simulator
1st Edition: 1st Edition: 1st Edition:

Basic Principles, WPT Systems Functionality, Structure and Manual, Methods and Applications
and Applications Handling of a Power Module
Order Code:
Order Code: Order Code: German version: 744 011
English version: 744 018 English version: 744 016

Application Notes Newsletter
Find helpful and comprehensive application notes about DC/DC Stay in touch about new
converters, interfaces, filter design and on how to use inductors, products, technologies,
ferrites, wireless power transfer coils, shielding material, power services, seminars,
modules, electromechanical components, capacitors and LEDs webinars and many more.
on www.we-online.com/appnotes
Subscribe to our monthly
newsletter on
www.we-online.com/
newsletter
Get Your IoT Device Matched!

Antenna Matching Service
Optimized antenna performance
Customer support for antenna placement in design phase
Smallest antennas with less ground clearance
requirements
Seminars, Webinars & Tutorials
We offer web-based seminars as a supplement to
our long-standing stationary seminars. Our experts
will shine a light on interesting topics regarding
electronic & electromechanical components.
www.we-online.com/seminars
www.we-online.com/webinars www.we-online.com/antennamatching
askLorandt
Follow me on …
Twitter.com/askLorandt
we-online.com/youtube
linkedin.com/in/lorandtfoelkel
@ we-online.com/askLorandt Lorandt Fölkel
Design Engineer
at heart
or contact me directly:
askLorandt@we-online.com

EMC Components
Product Overview 20
Products 24
Design Kits 38
Additional Information 46
12
1 PASSIVE COMPONENTS  EMC Components
Filter Applications: EMI Suppression
EMC Components
Ferrites for PCB Assembly
Core Material 1 MHz 10 MHz 100 MHz 1 GHz
@ Frequency NiZn (Nickel-Zinc)

NiZn HF (Nickel-Zinc)
Multilayer SMT Ferrites

IR 10 mA 100 mA 1A 10 A
Z @ 100 MHz 1 Ω 10 Ω 100 Ω 1000 Ω
Size: 0402, 0603, 0805,
450 – 9600 mA 1206, 1210, 1806, 1812
WE-CBF RDC: 0.005 – 1.5 Ω
5 – 2700 Ω Frequency Range: 6 MHz – 2 GHz
Size: 0603, 0805, 1206, 1612,

2100 – 10500 mA 1812, 2220, 3312
NiZn
WE-MPSB Z @ 1 GHz: 24 – 253 Ω

8 – 600 Ω RDC: 0.001 – 0.043 Ω
80 VAC
Frequency Range: 1 MHz – 3 GHz

SMT
Size: 0201, 0402, 0603

210 – 7500 mA Z @ 1 GHz: 12 – 1500 Ω
WE-TMSB RDC: 0.00295 – 1.91 Ω
Size: 0402, 0603

NiZn HF
250 – 1300 mA Z @ 1 GHz: 180 – 1100 Ω

WE-CBF HF RDC: 0.13 – 1.2 Ω
Wired SMT Ferrites

IR 10 mA 100 mA 1A 10 A
Z @ 25 MHz 1 Ω 10 Ω 100 Ω 1000 Ω
L x W x H Min: 3.1 x 2.9 x 2.41 mm
14 – 18 A L x W x H Max: 8.5 x 3 x 2.55 mm
WE-PBF Z @ 100 MHz: 39 – 98 Ω
23 – 65 Ω RDC: 0.0006 – 0.0009 Ω
L x W x H Min: 5.6 x 4.8 x 3.2 mm
17 – 21 A L x W x H Max: 9.3 x 8.5 x 4.8 mm
WE-CMS Z @ 100 MHz: 30 – 83 Ω
20 – 54 Ω RDC: 0.003 Ω
80 VAC

SMT
NiZn
L x W x H Min: 8 x 5 x 4.5 mm
5A L x W x H Max: 11 x 4.65 x 5 mm
WE-SUKW Z @ 100 MHz: 416 – 580 Ω
272 – 425 Ω RDC: 0.011 – 0.012 Ω
Frequency Range: 100 kHz – 800 MHz
L x W x H Min: 12 x 12 x 8 mm
L x W x H Max: 12 x 12 x 8 mm
WE-PF 4.5 – 10 A Z @ Max 2900 – 15000 Ω
RDC: 9 – 30 mΩ
Frequency Range: 1 – 100 MHz
THT Ferrites
IR 10 mA 100 mA 1A 10 A
Z @ 100 MHz 1 Ω 10 Ω 100 Ω 1000 Ω
L x W x H Min: 3.5 x 5 x 10 mm
3A L x W x H Max: 40 x 6 x 10 mm
WE-UKW Z @ 25 MHz: 145 – 920 Ω
230 – 1240 Ω RDC: 0.020 Ω
L x W x H Min: 7.62 x 5.08 x 10 mm
80 VAC
4A L x W x H Max: 11.2 x 11.2 x 11 mm

NiZn
THT
WE-MLS Z @ 25 MHz: 115 – 292 Ω

150 – 334 Ω RDC: 0.002 Ω
Frequency Range: 10 MHz – 100 MHz
L x W x H Min: 58.4 x 3.5 x 5 mm
3–6A L x W x H Max: 63 x 3.5 x 9 mm
WE-WAFB Z @ 10 MHz: 20 – 65 Ω
70 – 130 Ω RDC: 0.005 Ω

Ferrites for Cable Assembly

Core Material 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz
@ Frequency MnZn (Manganese-Zinc)

NiZn (Nickel-Zinc)
NiZn HF (Nickel-Zinc)
Round Cable – Medium and High Frequency

Cable Diameter 10 mm 20 mm 30 mm 40 mm
Z @ 100 MHz 10 Ω 100 Ω 1000 Ω 10000 Ω
Z @ 25 MHz 1 turn: 98 – 306 Ω
3.5 – 25 mm Frequency Range: 1 – 1000 MHz
WE-STAR-
TEC 182 – 525 Ω
Z @ 25 MHz 1 turn: 55 – 83 Ω
8 mm – 27 mm Frequency Range: 1 – 1000 MHz
WE-STAR-
NiZn
Snap Ferrite
RING 110 – 165 Ω
Z @ 25 MHz 1 turn: 120 – 180 Ω

2.5 – 8.5 mm Frequency Range: 1 – 1000 MHz
WE-STAR-
BUENO 200 – 350 Ω
Z @ 25 MHz 1 turn: 28 – 35 Ω
NiZn HF

WE-STAR-
GAP 345 – 400 Ω
Split Core
Z @ 25 MHz 1 turn: 48 – 100 Ω

7.8 ≤ 26.5 mm Frequency Range: 1 – 1000 MHz
WE-NCF
93 – 200 Ω
Z @ 25 MHz 1 turn: 25 – 110 Ω

3 – 33.4 mm Frequency Range: 1 – 1000 MHz
WE-TOF
37 – 200 Ω
Z @ 25 MHz 1 turn: 30 – 300 Ω

WE-AFB
Solid Core
45 – 451 Ω
NiZn
Z @ 25 MHz 1 turn: 20 – 114 Ω

0.55 – 4 mm Frequency Range: 1 – 1000 MHz
WE-SAFB
40 – 278 Ω
Z @ 25 MHz 1 turn: 35 – 126 Ω

WE-RIB
91 – 260 Ω
Split Core
Z @ 25 MHz 1 turn: 48 – 100 Ω

WE-
SPLITRING 93 – 200 Ω

EMC Components
Round Cable – Low Frequency
Cable Diameter 10 mm 20 mm 30 mm 40 mm
Z @ 1 MHz 10 Ω 100 Ω 1000 Ω 10000 Ω
Solid Core Snap Ferrite
Z @ 10 MHz 1 turn: 32 – 65 Ω
3.5 – 25 mm Frequency Range: 300 kHz – 30 MHz
WE-STAR-TEC
LFS 20 – 94 Ω
MnZn
Z @ 10 MHz 1 turn: 40 – 100 Ω

4.5 – 12.5 mm Frequency Range: 300 kHz – 30 MHz
WE-AFB LFS
30 – 130 Ω
Flat Cable
Cable Width 10 mm 20 mm 30 mm 40 mm
Z @ 100 MHz 10 Ω 100 Ω 1000 Ω 10000 Ω
Snap Ferrite
Z @ 25 MHz 1 turn: 42 – 97 Ω
> No. of Poles: 26 – 50
34 – 64.5 mm
WE-STAR-FLAT Frequency Range: 1 – 1000 MHz
100 – 194 Ω
Z @ 25 MHz 1 turn: 17 – 90 Ω
> No. of Poles: 10 – 40
WE-FLAT 14 – 64.5 mm
Frequency Range: 1 – 1000 MHz
Ferrite Core 42 – 166 Ω
Solid Core
NiZn
WE-FLAT Z @ 25 MHz 1 turn: 7 – 71 Ω

> Frequency Range: 1 – 1000 MHz
Ferrite for 5 – 52 mm
Flexible Printed 19 – 130 Ω
Circuit Boards
Z @ 25 MHz 1 turn: 27 – 148 Ω
Split Core
> Frequency Range: 1 – 1000 MHz

13 – 83.4 mm
WE-SFA
57 – 267 Ω
Accessories
WE-STAR-CLIP WE-STAR-KEY WE-FCAC
For the fixation of Snap Ferrite Equipment to open Snap Easy fixation for flat cores on
STAR-TEC (LFS), STARD-FIX Ferrites of WE-STAR Series ribbon cables
(LFS) and STAR-GAP

Common Mode Chokes for Low Voltage and Data Lines


NiZn (Nickel-Zinc)
Ceramic
IR 10 mA 100 mA 1A 10 A
ZMax 100 Ω 1000 Ω 10000 Ω 100000 Ω
L x W x H: 10 x 8.7 x 6.5 mm
350 – 2500 mA RDC: 0.025 – 0.72 Ω
WE-SL5 Number of windings: 2
460 – 13000 Ω Winding Style: Bifilar & Sectional
MnZn
L x W x H: 16.6 x 12.5 x 9.3 mm

150 – 10000 mA RDC: 0.0027 – 8.5 Ω
WE-UCF Number of windings: 2, 4
100 – 40000 Ω Winding Style: Sectional
Size: 0603 – 1812

90 – 2000 mA RDC: 0.05 – 5.5 Ω
WE-CNSW Number of windings: 2
22 – 10000 Ω Winding Style: Bifilar
Size: 0504, 0805

280 – 600 mA RDC: 0.22 – 0.30 Ω
WE-CNSW Number of windings: 2
HF 60 – 120 Ω Winding Style: Bifilar
Cut-Off Frequency: 4.5 – 10 GHz
L x W x H: 6 x 3.3 x 3.3 mm
300 – 400 mA RDC: 0.18 – 0.58 Ω
WE-SLM Number of windings: 2
Size: 7345, 1260, 1210

150 – 4750 mA RDC: 0.01 – 4.3 Ω
NiZn
WE-SCC Number of windings: 2

SMT
L x W x H: 6.3 x 3.6 x 1.65 mm

300 mA RDC: 0.16 – 0.30 Ω
L x W x H: 9.3 x 8.3 x 5.3 mm

1400 – 5000 mA RDC: 0.0055 – 0.06 Ω
WE-SL5 HC Number of windings: 2
L x W x H: 9.2 x 6.6 x 2.5 mm

450 – 700 mA RDC: 0.14 – 0.45 Ω
WE-SL3 Number of windings: 2–3
1250 – 5000 Ω Winding Style: Bifilar & Trifilar
L x W x H: 9.2 x 6 x 5 mm
200 – 1600 mA RDC: 0.08 – 2.6 Ω
NiZn / MnZn
920 – 50000 Ω Winding Style: Bifilar & Sectional
L x W x H: 12.7 x 11 x 5.75
200 – 2700 mA RDC: 0.035 – 0.85 Ω
WE-SL Number of windings: 2–4
Size: 0504
Ceramic
300 mA RDC: 2.5 Ω

WE-CCMF Next Generation for Number of windings: 2
1600 – 11000 Ω High Frequencies Winding Style: Multilayer
Cut-Off Frequency: 8 – 12 GHz

EMC Components
Common Mode Chokes for Mains Power Lines

NiZn (Nickel-Zinc)
< 1 kHz Nanocrystalline
Fe (Iron Powder)
Single Phase Common Mode Chokes (2 Windings)

IR 100 mA 1A 10 A 100 A
L 100 µH 1 mH 10 mH 100 mH
L x W x H Min: 15 x 7.5 x 18 mm
0.3 – 35 A L x W x H Max: 47 x 23.5 x 43 mm
WE-CMB RDC: 0.0023 – 3 Ω
0.5 – 39 mH VR: 250 VAC
L x W x H: 32.5 x 28 x 22 mm
2 – 10 A RDC: 0.0125 – 0.230 Ω
WE-CMBH VR: 250 VAC
1 – 20 mH
L x W x H: 18.5 x 14.5 x 22 mm
5 – 10 A RDC: 0.004 – 0.044 Ω
WE-CMB VR: 250 VAC
HC 0.175 – 0.7 mH
L x W x H Min: 39.5 x 23 x 39.5 mm

6.8 – 21.5 A L x W x H Max: 46.5 x 28 x 44.5 mm
WE-CMB RDC: 0.0038 – 0.044 Ω
HV 0.7 – 4.7 mH VR: 760 VAC
L x W x H Min: 21.3 x 16.6 x 22.5 mm

0.4 – 2.65 A L x W x H Max: 21.3 x 21.3 x 17.8 mm
THT
WE-FC RDC: 0.08 – 2.88 Ω

1.1 – 43 mH VR: 250 VAC
MnZn
L x W x H: 37 x 26 x 45 mm
RDC: 0.050 – 0.9 Ω
1.25 – 5.0 A
WE-FCL VR: 250 VAC
3.9 – 100 mH
L x W x H Min: 17 x 15.5 x 12.5 mm

L x W x H Max: 17 x 11.5 x 17 mm
0.25 – 1.0 A
WE-TFC RDC: 0.31 – 3.6 Ω
1.8 – 25 mH VR: 300 VAC
L x W x H Min: 25 x 27.5 x 9.7 mm

L x W x H Max: 25 x 27.5 x 11.7 mm
9.5 – 23.5 A
WE-LPCC RDC: 0.0014 – 0.0096 Ω
120 – 450 µH VR: 250 VAC
L x W x H Max: 33.5 x 33.5 x 20 mm
0.3 – 6 A
WE-LF RDC: 0.02 – 2.6 Ω
0.4 – 50 mH VR: 250 VAC
L x W x H: 23.3 x 18.5 x 11.5 mm

RDC: 0.03 – 2.6 Ω
SMT
WE-LF 0.4 – 5.25 A

VR: 250 VAC
SMD 0.7 – 47 mH
L x W x H Min: 14 x 7.5 x 16 mm
crystalline
L x W x H Max: 48 x 27 x 46 mm
0.9 – 38 A
Nano-
WE- RDC: 0.0011 – 1 Ω

CMBNC 0.4 – 190 mH VR: 250 VAC
L x W x H Min: 16 x 7.5 x 17.5 mm

L x W x H Max: 18.5 x 14.5 x 22 mm
WE-CMB 1.5 – 10 A
NiZn
THT
RDC: 0.0027 – 0.08 Ω

NiZn < 14 – 110 µH VR: 250 VAC
L x W x H: 28 x 18.5 x 33 mm
Mn / NiZn
4.5 – 15 A RDC: 0.0046 – 0.042 Ω

WE-ExB VR: 250 VAC
< 47 – 1000 µH

Three Phases Common Mode Chokes (3 Windings)

IR 100 mA 1A 10 A 100 A
L 100 µH 1 mH 10 mH 100 mH
L x W x H: 47 x 47 x 39 mm
6 – 24 A RDC: 0.003 – 0.065 Ω
WE-TPB VR: 500 VAC
0.52 – 12 mH
MnZn
THT
WE-TPB 7.2 – 46 A L x W x H: 70 x 70 x 39 mm
RDC: 0.0016 – 0.085 Ω
HV 0.2 – 208 mH
crystalline
VR: 760 VAC

Nano-
Differential Mode Chokes (1 Winding)

IR 100 mA 1A 10 A 100 A
L 100 nH 1 µH 10 µH 100 µH
L x W x H Min: 12.3 x 3.2 x 3.2 mm
2.5 – 15 A L x W x H Max: 30.8 x 16 x 16 mm
NiZn
WE-SD RDC: 0.0017 – 0.033 Ω

2 – 10 µH
THT
L x W x H Min: 9.5 x 6 x 15 mm
0.9 – 9 A L x W x H Max: 28.5 x 15 x 28.5 mm
WE-FI
Fe
RDC: 0.01 – 0.45 Ω

8.2 – 860 µH
Size: 0603 – 1206

< 3 – 300 mA RDC: 0.15 – 2.1 Ω
SMT
NiZn
WE-MI < 0.047 – 33 µH
Line Filter
IR 100 mA 1A 10 A 100 A
L 100 µH 1 mH 10 mH 100 mH
Chassis
mount
1.5 – 20 A L x W x H Max: 114.9 x 58.5 x 45 mm

WE-CLFS RDC: 0.01 – 0.300 Ω
Line Filter 1 – 20 mH VR: 250 VAC
Size: L x W x H

EMC Components
ESD and Surge Protection
Surge Protection
Operating Voltage 1 V 10 V 100 V 1000 V
IPeak 1 A 10 A 100 A 1000 A
Diameters: 5 – 20 mm
18 – 1465 VRMS Wmax.: 0.7 – 620 J
THT
WE-VD VClamp: 43 – 2970 V

100 – 10.000 A (8 / 20 µs) VBR: 22 – 1800 V
Size: 0402 – 1206

3.3 – 85 VDC Wmax.: 0.02 – 1.1 J
WE-VS VClamp: 13 – 165 V
10 – 200 A (8 / 20 µs) VBR: 5.5 – 100 V
SMT
Size: DO-214AC: SMAJ

5 – 440 VDC DO-214AA: SMBJ
WE-TVSP DO-214AB: SMCJ, SMDJ
0.6 – 326 A (10 / 1000 µs) Pdiss: 400 – 3000 W
VClamp: 9.2 – 162 V
ESD Protection
Operating Voltage 1 V 10 V 100 V 1000 V
Ctyp 0.01 pF 0.1 pF 1 pF 10 pF
WE-TVS Size: DFN3810 / 1210 / 1610 / 2020,

1.2 – 20 VDC MSOP, SC70, SOT23 / 563 / 143
Standard
> Channel: 1 – 8 / uni or bidirectional
High Speed 0.2 – 1650 pF VESD (contact / air): up to ±30 kV / ±30 kV
Super Speed
WE-VE Size: 0402, 0603, 0805

5 – 26 VDC Channel: 1 / bidirectional
SMT
ESD Suppressor,
> VESD (contact / air): ±8 kV / ±15 kV
ULC ESD Suppressor, 0.05 – 120 pF
femtoF
Size: 0508, 0612
5 – 18 VDC Channel: 1 / bidirectional
WE-VEA > VESD (contact / air): ±8 kV / ±15 kV
0.2 – 120 pF

Product Overview
How to find detailed product information?
Visit www.we-online.com and search

for product series information, e.g.:
WE-CBF
Ferrites for PCB Assembly Ferrites for Cable Assembly

Extended WE-TMSB WE-CMS WE-STAR-BUENO
Z @ 100 MHz: 10 ~ 1800 Ω Z @ 25 MHz: 20 ~ 54 Ω Z @ 25 MHz 1 turn: 120 ~ 180 Ω
IR: 210 ~ 7500 mA Z @ 200 MHz: 30 ~ 83 Ω Z @ 100 MHz 1 turn: 250 ~ 350 Ω
RDC: 3 mΩ ~ 1.9 Ω IR: 17 ~ 21 A Cable Diameter: 2.5 ~ 8.5 mm
Frequency Range: 6 ~ 3000 MHz Frequency Range: 1 ~ 3000 MHz Frequency Range: 1 ~ 1000 MHz
WE-CBF WE-SUKW WE-STAR-TEC LFS

Z @ 100 MHz: 5 ~ 2700 Ω Z @ 25 MHz: 272 ~ 425 Ω Z@ 1 MHz 1 turn: 20 ~ 94 Ω
IR: 450 ~ 9600 mA Z @ 100 MHz: 416 ~ 580 Ω Z@ 10 MHz 1 turn: 32 ~ 65 Ω
RDC: 5 mΩ ~ 1.5 Ω IR: 5A Cable Diameter: 3.5 ~ 25 mm
Frequency Range: 6 ~ 2000 MHz Frequency Range: 0.1 ~ 800 MHz Frequency Range: 300kHz ~ 30 MHz
WE-CBF HF WE-UKW WE-STAR-TEC

Z @ 1 GHz: 180 ~ 1100 Ω Z @ 25 MHz: 145 ~ 920 Ω Z @ 25 MHz 1 turn: 98 ~ 306 Ω
IR: 250 ~ 1300 mA Z @ 100 MHz: 230 ~ 1240 Ω Z @ 100 MHz 1 turn: 182 ~ 525 Ω
RDC: 0.13 ~ 1.2 Ω IR: 3A Cable Diameter: 3.5 ~ 25 mm
Frequency Range: 300 ~ 3000 MHz Frequency Range: 0.1 ~ 500 MHz Frequency Range: 1 ~ 1000 MHz
WE-MPSB WE-MLS WE-STAR-GAP

IR: 2100 ~ 10.500 mA Z @ 100 MHz: 150 ~ 334 Ω Z @ 500 MHz 1 turn: 345 ~ 400 Ω
RDC: 1.0 ~ 43 mΩ IR: 4A Cable Diameter: 4.5 ~ 12.5 mm
Frequency Range: 1 ~ 3000 MHz Frequency Range: 10 ~ 800 MHz Frequency Range: 100 ~ 2000 MHz
WE-PBF WE-WAFB WE-STAR-RING

IR: 14 ~ 18 A IR: 3~6A Cable Diameter: 8 ~ 27 mm
RDC: 0.4 ~ 0.9 mΩ Frequency Range: 1 ~ 1000 MHz Frequency Range: 1 ~ 1000 MHz
Frequency Range: 6 ~ 2000 MHz
WE-STAR-FLAT
WE-PF Z @ 25 MHz 1 turn: 42 ~ 97 Ω
IR: 4.5 ~ 10 A Z @ 100 MHz 1 turn: 101 ~ 194 Ω
RDC: 9 ~ 30 mΩ No. of Poles: 26 ~ 50
Frequency Range: 1 ~ 100 MHz Frequency Range: 1 ~ 1000 MHz
WE-STAR-CLIP
For the fixation of
Snap Ferrite STAR-TEC (LFS),
STAR-FIX (LFS) and STAR-GAP
WE-NCF
Z @ 25 MHz 1 turn: 48 ~ 100 Ω
Z @ 100 MHz 1 turn: 93 ~ 200 Ω
Cable Diameter: ≤ 7.8 ≤ 26.5 mm

EMC Components
Ferrites for Cable Assembly Filter Chokes Common Mode Chokes Power Lines
WE-SPLITRING WE-MI WE-CMB
Z @ 25 MHz 1 turn: 48 ~ 100 Ω L: 0.047 ~ 10 µH L: 0.5 ~ 39 mH
Z @ 100 MHz 1 turn: 93 ~ 200 Ω IR: 3 ~ 300 mA IR: 0.3 ~ 35 A
Cable Diameter: ≤ 7.8 ≤ 26.5 mm RDC: 0.15 ~ 2.1 Ω RDC: 1.7 ~ 3000 mΩ
Frequency Range: 1 ~ 1000 MHz Frequency Range: 1 ~ 100 MHz Frequency Range: 0.1 ~ 100 MHz
Number of Windings: 2
WE-SFA WE-SD
Z @ 25 MHz 1 turn: 27 ~ 148 Ω L: 2 ~ 10 µH WE-CMBNC
Z @ 100 MHz 1 turn: 57 ~ 267 Ω IR: 2.5 ~ 15 A L: 0.4 ~ 190 mH
No. of Poles: 10 ~ 64 RDC: 1.7 ~ 33 mΩ IR: 0.9 ~ 32 A
Frequency Range: 1 ~ 1000 MHz Frequency Range: 0.01 ~ 90 MHz RDC: 1.1 ~ 430 mΩ
Frequency Range: 0.001 ~ 300 MHz
WE-FLAT WE-FI Number of Windings: 2
Z @ 25 MHz 1 turn: 17 ~ 90 Ω L: 8.2 ~ 860 µH
Z @ 100 MHz 1 turn: 42 ~ 166 Ω IR: 0.4 ~ 5 A WE-CMB HC
Types: round, square, edged RDC: 0.01 ~ 0.45 Ω L: 0.175 ~ 0.7 mH
Frequency Range: 1 ~ 1000 MHz Frequency Range: 0.01 ~ 0.3 MHz IR: 5 ~ 10 mA
RDC: 2.7 ~ 13 Ω
WE-FLAT Ferrite for Flexible Printed Frequency Range: 0.1 ~ 100 MHz
Circuit Boards Number of Windings: 2
Z @ 25 MHz 1 turn: 7 ~ 71 Ω
Z @ 100 MHz 1 turn: 19 ~ 130 Ω WE-CMB HV
Types: round, square L: 0.7 ~ 4.7 mH
Frequency Range: 1 ~ 1000 MHz IR: 6.8 ~ 21.5 A
RDC: 3.5 ~ 44 mΩ
WE-FCAC Frequency Range: 0.005 ~ 5 MHz
Easy fixation for flat cores on ribbon Number of Windings: 2
cables
No. of Poles: 16 ~ 40 WE-CMB NiZn
L: 14 ~ 110 µH
WE-TOF IR: 1.5 ~ 10 A
Z @ 25 MHz 1 turn: 25 ~ 110 Ω RDC: 2.7 ~ 80 mΩ
Z @ 100 MHz 1 turn: 37 ~ 200 Ω Frequency Range: 0.1 ~ 100 MHz
Cable diameter: 3.0 ~ 33.4 mm Number of Windings: 2
WE-ExB
WE-AFB LFS L: 47 ~ 1000 µH
Z @ 1 MHz 1 turn: 30 ~ 130 Ω IR: 4.5 ~ 15 A
Z @ 10 MHz 1 turn: 40 ~ 100 Ω RDC: 4.6 ~ 42 mΩ
Cable diameter: 4.5 ~ 12.5 mm Frequency Range: 0.1 ~ 200 MHz
Frequency Range: 300 kHz ~ 30 MHz Number of Windings: 2
WE-AFB
Z@ 25 MHz 1 turn: 30 ~ 300 Ω
Z@ 100 MHz 1 turn: 45 ~ 451 Ω
Cable diameter: 4.55 ~ 12.5 mm
WE-SAFB
Z @ 25 MHz 1 turn: 20 ~ 144 Ω
Z @ 100 MHz 1 turn: 40 ~ 278 Ω
WE-RIB
Z @ 25 MHz 1 turn: 35 ~ 126 Ω
Z @ 100 MHz 1 turn: 91 ~ 260 Ω

Product Overview
Common Mode Chokes Power Lines Common Mode Chokes Signal Lines
WE-CMBH WE-CNSW WE-SL3
L: 1 ~ 7 mH Z @ 100 MHz: 45 ~ 10000 Ω L: 20 ~ 100 μH
IR: 3.5 ~ 10 A IR: 90 ~ 2000 mA IR: 450 ~ 700 mA
RDC: 12.5 ~ 80 mΩ RDC: 0.05 ~ 5.5 Ω RDC: 0.14 ~ 0.45 Ω
Frequency Range: 0.1 ~ 100 MHz Frequency Range: 1 ~ 3000 MHz Frequency Range: 9 ~ 600 MHz
Number of Windings: 2 Number of Windings: 2 Number of Windings: 2–3
WE-LF WE-CNSW HF WE-SL5

L: 0.4 ~ 50 mH Z @ 100 MHz: 60 ~ 120 Ω L: 120 ~ 4700 µH
IR: 0.3 ~ 6 A IR: 280 ~ 600 mA IR: 350 ~ 2500 mA
RDC: 0.02 ~ 2.6 Ω RDC: 0.22 ~ 0.30 Ω RDC: 0.025 ~ 0.72 Ω
Frequency Range: 0.1 ~ 100 MHz Frequency Range: 10 ~ 10000 MHz Frequency Range: 9 ~ 600 MHz
Number of Windings: 2 Number of Windings: 2 Number of Windings: 2
WE-LF SMD Extended WE-CCMF WE-SL5 HC

L: 0.7 ~ 47 mH Z @ 100 MHz: 1.6 ~ 2 Ω L: 5 ~ 30 μH
IR: 0.3 ~ 5.25 A fc: 8 ~ 12 GHz IR: 1.2 ~ 5 A
RDC: 0.03 ~ 2.6 Ω IR: 300 mA RDC: 0.0055 ~ 0.06 Ω
Frequency Range: 0.1 ~ 100 MHz Common mode Attenuation Frequency Range: 1.4 ~ 300 MHz
Number of Windings: 2 @ 2450 MHz: 20 ~ 30 dB Number of Windings: 2
WE-TFC WE-SLM WE-SL

L: 1.8 ~ 25 mH L: 11 ~ 470 µH L: 35 ~ 4700 µH
IR: 0.25 ~ 1.0 A IR: 300 ~ 400 mA IR: 0.2 ~ 2.7 A
RDC: 0.31 ~ 3.60 Ω RDC: 0.18 ~ 0.58 Ω RDC: 0.035 ~ 0.85 Ω
Frequency Range: 0.001 ~ 100 MHz Frequency Range: 0.01 ~ 600 MHz Frequency Range: 0.01 ~ 600 MHz
Number of Windings: 2 Number of Windings: 2 Number of Windings: 2~4
WE-FC WE-SL1 WE-SCC

L: 1.1 ~ 43 mH L: 10 ~ 330 µH L: 1 ~ 1000 µH
IR: 0.4 ~ 2.65 A IR: 300 mA IR: 150 ~ 4750 mA
RDC: 0.07 ~ 2.5 mΩ RDC: 0.16 ~ 0.3 Ω RDC: 0.01~ 4.30 Ω
Number of Windings: 2 Number of Windings: 2 Number of Windings: 2
WE-FCL WE-SL2 WE-UCF

L: 3.9 ~ 100 mH L: 10 ~ 20000 µH L: 0.013 ~ 100 mH
IR: 1.25 ~ 5 A IR: 0.2 ~ 1.6 A IR: 0.15 ~ 10 A
RDC: 50 ~ 900 Ω RDC: 0.08 ~ 2.6 Ω RDC: 0.0027 ~ 8.5 Ω
Number of Windings: 2 Number of Windings: 2 Number of Windings: 2~4
WE-LPCC
L: 120 - 450 µH
IR: 9.5 ~ 23.5 A
RDC: 1.4 ~ 9.6 mΩ
WE-TPB
L: 0.52 ~ 12 mH
IR: 6 ~ 24 A
RDC: 3 ~ 65 mΩ
WE-TPB HV
L: 0.2 ~ 208 mH
IR: 7.2 ~ 46 A
RDC: 1.6 ~ 85 mΩ

EMC Components
ESD and Surge Protection EMC Shielding Solutions Thermal Management
WE-TVS EMC Tapes Thermal Gap Filler Pad WE-TGF
Operating Voltage: 1.2 ~ 24 VDC EMC tapes with copper tape,
Ctyp: 0.18 ~ 1650 pF aluminum tape, conductive foam,
Channels: 1 ~ 8 (+VDD) conductive fabric
Uni / Bidirectional, Rail-to-Rail
Extended Board Level Shielding WE-SHC &
WE-VE / WE-VEA WE-SHC Seamless
Operating Voltage: 5 ~ 26 VDC Metal cabinets for board level
Ctyp: 0.05 ~ 120 pF shielding, ShielDIY for prototyping,
Size: 0402 ~ 0805 / 0508 ~ 0612 SMD & THT, frame & cover, one piece
solution
Extended WE-TVSP
Operating Voltage: 5 ~ 440 VDC Extended EMI Gaskets & Grounding WE-SECF,
IPeak (10 / 100 µs): 2.5 ~ 326.1 A WE-SMGS, WE-EEL, WE-ST
Line Filters
VClamp: 9.2 ~ 713 V SMD grounding contacts, grounding
WE-CLFS Line Filter
Size: SMAJ, SMBJ, SMCJ, SMDJ cables for earthing belts, cable
IR: 1.5 ~ 20 A
shielding and metal clips
WE-VS ILeak: 0.173 ~ 0.785 mA
Operating Voltage: 3.3 ~ 85 VDC Magnetic Shielding WE-FAS, RDC: 15 ~ 300 mΩ
IPeak (8 / 20 µs): 10 ~ 200 A WE-FSFS, WE-CPU Frequency Range: 0.01 ~ 100 MHz
Wmax: 0.02 ~ 1.1 J Absorber Sheets, Thermal Conductive
Size: 0402 ~ 1206 & EMI Absorber Sheets, Flexible Ferrite
Sheets, Ferrite Plates
WE-VD
Operating Voltage: 14 ~ 1000 VRMS
IPeak (8 / 20 µs): 0.1 ~ 10 kA
Wmax: 0.7 ~ 620 J
Diameters: 5 ~ 20 mm
Reference for cURus / CQC / VDE
D-SUB Filter Connectors

D-SUB Filter Connectors
Bent 90°, solder cup, solder pin
straight, filter adapter
All EMC Components at a glance:
www.we-online.com/emc-components
Explore our application notes

for EMC Components:
www.we-online.com/appnotes
Component libraries available for:

 PCB library: Altium Designer,
EAGLE, Cadence OrCAD & Allegro,
Zuken CAD-Star
 S-Parameter & SPICE model:
S-Parameter, LTspice, PSpice, Spectre
 RF & microwave simulation models:
Modelithics
www.we-online.com/library

1 PASSIVE COMPONENTS  EMC Components  Products
WE-CBF HF
MT EMI Suppression Ferrite Bead
S
Characteristics: Applications:
■ Modified internal layout increases the effective ■ Especially for the suppression of signal lines in the
suppression range high frequency range
■ The impedance at 1 GHz are at least 3 times higher ■ For fast data lines: CPU, highspeed bus systems,
compared to the WE-CBF product family HDD
■ Operating temperature: -55 °C up to +125 °C
Additional rated current definition! www.we-online.com/we-cbfhf
Size 0402
Technical Data:
Z @ 100 MHz IR 2 Test Condition Zmax Test Condition RDC typ. Z @ 1 GHz
Order Code Type
(Ω) (mA) IR 2 (Ω) Zmax (Ω) (Ω)
742843122 220 800 400 750 MHz 0.25 300 High Current
742841160 600 250 ΔT = 40 K 1800 650 MHz 0.82 1100 Wide Band
742841210 1000 250 1750 500 MHz 0.9 900 Wide Band
Z @ 100 MHz: Impedance @ 100 MHz; IR 2: Rated Current 2; Test Condition IR 2: Rated Current 2 (Test cond.); Zmax: Maximum Impedance; Test Condition Zmax: Maximum
Impedance (Test cond.); RDC typ.: DC Resistance; Z @ 1 GHz: Impedance @ 1 GHz
Size 0603
Technical Data:
Order Code Type
742862160 600 350 1500 700 MHz 0.8 850 High Speed
742863160 600 500 ΔT = 40 K 950 600 MHz 0.22 800 High Current
742861210 1000 300 2200 450 MHz 1.2 1100 Wide Band

WE-TMSB
Tiny Multilayer Suppression Bead
EMC Components
■ Perfect for miniaturization of EMI solutions ■ General signal & low power lines
■ Wide impedance range from 10 Ω up to 1500 Ω ■ Audio / video / clock lines
■ Operating temperature: -55 °C up to +125 °C ■ Small handhelds
■ IoT, 5G
Perfect for downsizing www.we-online.com/we-tmsb
Size 0201
Technical Data:
Order Code Type
742692003 120 250 259 770 MHz 0.29 250
742692004 240 300 ΔT = 40 K 460 536 MHz 0.57 342 Wide Band
74269221561 560 250 750 225 MHz 0.75 250
Size 0402
Technical Data:
Order Code Type
74269242111 110 1200 195 745 MHz 0.07 188 Wide Band
74269242161 160 1000 280 550 MHz 0.12 250 High Current
74269242261 260 1000 375 300 MHz 0.12 220 High Current
ΔT = 40 K
74269243461 460 500 1250 230 MHz 0.35 300 High Speed
74269241601 600 850 720 211 MHz 0.22 218 Wide Band
74269244182 1800 210 2700 450 MHz 1.91 1500 High Frequency

WE-CCMF
Ceramic Common Mode Filter
■ Compact multilayer common mode choke / filter ■ High speed differential datalines
■ High common mode attenuation on WiFi frequencies ■ USB 3 / 4
(> 30 dB @ bandwidth) ■ Thunderbolt 2 / 3
■ Ultra-high-speed differential signal transmission ■ HDMI 2.0 & 2.1
■ > 12 GHz differential mode cutoff frequency ■ Sata 3.X
■ LTCC based low-loss and highly reliable structure ■ Display Port
■ High thermal stability ■ PCIe 3.0
■ Recommended soldering: Reflow ■ eDP
For extremely high speed

www.we-online.com/we-ccmf
datalines like USB 3 / 4
Size 0504
Technical Data:
IL(SCC 2,1) Test Condition fc VR RDC max. IR Z @ 100 MHz RISO
Order Code
(dB) IL(SCC 2,1) (GHz) (VDC) (Ω) (mA) (Ω) (MΩ)
748020024 30 2450 MHz 8 2
748030024 30 2450 MHz 12 2
5 2.5 300 100
2450 & 5500
748032455 20 12 1.6
MHz
IL(SCC 2,1): Common Mode Attenuation; Test Condition IL(SCC 2,1): Common Mode Attenuation (Test cond.); fc: Cut-Off Frequency; VR: Rated Voltage; RDC max.: DC Resistance max.;
IR: Rated Current; Z @ 100 MHz: Impedance @ 100 MHz; RISO: Insulation Resistance

WE-CNSW HF
MT Common Mode Line Filter
S
EMC Components
■ Current compensated data line filter ■ USB 2.0
■ High common mode noise suppression at high ■ IEEE 1394 (Firewire)
frequencies ■ LVDS
■ Small influence on high speed signals through ■ High Speed Data Lines
winding symmetry ■ LAN
■ Climatic category 40 / 105 / 21 (Size 0504 / 0603)
■ Climatic category 40 / 125 / 21 (Size 0805 / 1206 /
1812)
■ Flammability corresponding to UL 94 V-0
New AEC-Q 200 qualification www.we-online.com/we-cnswhf
Size 0504
Technical Data:
Z @ 100 MHz IR RDC max. VR VT
Order Code Application Winding Style
(Ω) (mA) (mΩ) (V) (VAC)
7442335600 60 600 220
20 125 USB 3.X, HDMI 1.4 bifiliar
7442335900 90 500 270
Z @ 100 MHz: Impedance @ 100 MHz; IR: Rated Current; RDC max.: DC Resistance max.; VR: Rated Voltage; VT: Insulation Test Voltage
Size 0805
Technical Data:
(Ω) (mA) (mΩ) (V) (VAC)
744233670 67 320 240 USB 3.0
744233900 90 280 300 50 125 HDMI bifiliar
744233121 120 280 300 LVDS / USB2.0

WE-CNSW
SMT Common Mode Line Filter
■ Current compensated data line filter ■ USB 2.0
■ High common mode noise suppression at high ■ IEEE 1394 (Firewire)
frequencies ■ LVDS
■ Small influence on high speed signals through ■ High Speed Data Lines
winding symmetry ■ LAN
■ Climatic category 40 / 105 / 21 (Size 0603)
■ Climatic category 40 / 125 / 21 (Size 0805 / 1206 /
1812)
■ Flammability corresponding to UL 94 V-0
New AEC-Q 200 qualification www.we-online.com/we-cnsw
Size 0603
Technical Data:
(Ω) (mA) (Ω) (V) (VAC)
High Speed Data
744230220 22 800 0.08
Lines
High Speed Data
744230450 45 650 0.11
Lines
744230900 90 550 0.145 USB 2.0
50 125 IEEE 1394 / bifiliar
744230121 120 450 0.175
Firewire 400 Mbps
IEEE 1394 /
744230181 180 400 0.21
Firewire 400 Mbps
High Speed Data
744230251 250 350 0.28
Lines
Size 0805
Technical Data:
(Ω) (mA) (Ω) (V) (VAC)
High Speed Data
744231061 67 400 0.25
Lines
744231091 90 370 0.3 USB 2.0
IEEE1394 / Firewire
744231121 120 370 0.3
400 Mbps
50 125 IEEE1394 / Firewire bifiliar
744231181 180 330 0.35
400 Mbps
High Speed Data
744231261 260 300 0.4
Lines
IEEE1394 / Firewire
744231371 370 280 0.45
400 Mbps

Size 1206
EMC Components
Technical Data:
Z @ 10 MHz Z @ 100 MHz IR RDC max. VR VT
(Ω) (Ω) (mA) (Ω) (V) (VDC)
744232090 – 90 370 0.3 USB 2.0
IEEE1394 /
744232161 – 160 340 0.4 Firewire
400 Mbps
744232261 – 260 310 0.5 50 125 – bifiliar
744232601 – 600 260 0.8 –
744232102 – 1000 230 1 –
744232222 – 2200 200 1.2 –
744232101 6000 – 90 5.5 –
Z @ 10 MHz: Impedance @ 10 MHz; Z @ 100 MHz: Impedance @ 100 MHz; IR: Rated Current; RDC max.: DC Resistance max.; VR: Rated Voltage; VT: Insulation Test Voltage
Size 1812
Technical Data:
Z @ 10 MHz Z @ 100 MHz IR RDC max. VR
Order Code VT Winding Style
(Ω) (Ω) (mA) (Ω) (V)
744235900 – 90 2000 0.05
744235601 – 600 1200 0.1
744235801 – 800 1000 0.12
744235110 – 5000 450 0.8
60 125 VAC bifiliar
744235220 – 8000 250 2.65
744235510 3000 – 200 1
744235101 5000 – 150 2
744235251 10000 – 200 1.6
Z @ 10 MHz: Impedance @ 10 MHz; Z @ 100 MHz: Impedance @ 100 MHz; IR: Rated Current; RDC max.: DC Resistance max.; VR: Rated Voltage; VT: Insulation Test Voltage

WE-SL2
SMD Common Mode Line Filter
■ A huge variety of inductance values, bifilar and ■ Current compensated choke for low voltage lines
sectional winding style and two different core ■ DC input and output filter
materials MnZn and NiZn ensure the right ■ Filter for measurement signals
parameters for many applications ■ CAN
■ Rated voltage: 80 VDC (42 VAC) ■ Suppression of common mode noise with a highly
■ Flammability corresponding to UL 94 V-0 flexible component
■ Climatic category 40 / 125 / 21
■ Size (LWH): 9.2 mm x 6 mm x 5 mm
New AEC-Q200 qualification www.we-online.com/we-sl2
Size 9260
Technical Data:
L Zmax IR RDC max.
Order Code Tol. L Winding Style
(µH) (Ω) (mA) (Ω)
744226 10 ±30% 920 1600 0.08 bifilar
744226S 10 ±30% 920 1600 0.08 sectional
744228 25 ±30% 2800 1000 0.12 bifilar
744228S 25 ±30% 2800 1000 0.12 sectional
744225 40 ±30% 3100 900 0.25 bifilar
744225S 40 ±30% 3100 900 0.25 sectional
744227 51 ±30% 5500 1000 0.16 bifilar
744227S 51 ±30% 5500 1000 0.16 sectional
744224 250 ±50% 1800 1200 0.13 bifilar
744223 500 ±50% 3300 1000 0.15 bifilar
744222 1000 ±50% 6000 800 0.207 bifilar
744221 2000 ±50% 9200 600 0.42 bifilar
744220 4700 ±50% 20000 500 0.75 bifilar
744229 6500 ±50% 18400 400 0.95 bifilar
744220103 10000 ±50% 25000 350 1.2 bifilar
744220203 20000 ±50% 50000 200 2.6 bifilar
L: Inductance; Tol. L: Inductance (Tol.); Zmax: Maximum Impedance; IR: Rated Current; RDC max.: DC Resistance max.

WE-TFC
Common Mode Power Line Choke
EMC Components
■ Suppression of common mode noise up to 70 dB ■ Mains filter
■ Approximate 1% stray inductance for symmetrical ■ Compact switched-mode power supplies
interference suppression ■ Electronic ballast applications (LED bulb)
■ Flammability corresponding to UL 94 V-0 ■ Lighting
■ Climate category 40 / 125 / 21 ■ White goods
Excellent price performance ratio www.we-online.com/we-tfc
Size UU9.8V
Technical Data:
IR L RDC max. VR VT L W H
Order Code Mount
(A) (mH) (Ω) (VAC) (VAC) (mm) (mm) (mm)
744862250 0.25 25 3.6
744862180 0.3 18 3.1
744862120 0.4 12 2
744862100 0.45 10 1.65
300 2500 17 11.5 17 THT
744862082 0.5 8.2 1.3
744862056 0.6 5.6 0.83
744862033 0.8 3.3 0.51
744862018 1 1.8 0.31
IR: Rated Current; L: Inductance; RDC max.: DC Resistance max.; VR: Rated Voltage; VT: Insulation Test Voltage; L: Length; W: Width; H: Height
Size UU9.8H
Technical Data:
IR L RDC max. VR VT L W H
Order Code Mount
(A) (mH) (Ω) (VAC) (VAC) (mm) (mm) (mm)
744861250 0.25 25 3.6
744861180 0.3 18 3.1
744861120 0.4 12 2
744861100 0.45 10 1.65
300 2500 17 15.5 12.5 THT
744861082 0.5 8.2 1.3
744861056 0.6 5.6 0.83
744861033 0.8 3.3 0.51
744861018 1 1.8 0.31
IR: Rated Current; L: Inductance; RDC max.: DC Resistance max.; VR: Rated Voltage; VT: Insulation Test Voltage; L: Length; W: Width; H: Height

WE-TVSP
Power TVS Diode
■ Low profile package ■ Ideal to protect the I/O interfaces, bus voltage and
■ Glass passivated junction other circuits of sensitive electronic equipment
■ Excellent clamping capability against voltage transients
■ MSL Level 1 per J-STD-020
■ Classification of the plastic case: UL 94 V-0
■ Safety certification:
– UL 497B: E478010
– UL 1449: E332875
■ Fast response time
■ Identical design:
– DO-214AC = SMAJ
– DO-214AA = SMBJ
More voltage options available – DO-214AB = SMCJ / SMDJ www.we-online.com/we-tvsp
on request
DO-214AC (400 W) / SMAJ

Technical Data:
Test Test
Bidirec- Marking Marking VDC VBR VClamp max. IPeak ILeak
Order Code Condition Tol. VBR Condition
tional UNI BI (V) (V) (V) (A) (µA)
VBR VClamp
824500162 824501162 SP VP 160 187.5 259 1.5
824500202 824501202 SV VV 200 235.5 324 1.2
824500222 824501222 GE VX 220 259 356 1.1
824500252 824501252 SZ VZ 250 294 405 1
1 mA ±5 % IPEAK 1
824500302 824501302 TE UE 300 353 486 0.8
824500352 824501352 TG UG 350 411.5 567 0.7
824500402 824501402 TK UK 400 470.5 648 0.6
824500442 824501442 TM UM 440 517.5 713 0.6
VDC: DC Operating Voltage; VBR: (Reverse) Breakdown Voltage [min.]; Test Condition VBR: (Reverse) Breakdown Voltage (Test cond.); Tol. VBR: (Reverse) Breakdown Voltage
(Tol.); VClamp max.: Clamping Voltage [max.]; Test Condition VClamp: Clamping Voltage (Test cond.); IPeak: (Reverse) Peak Pulse Current; ILeak: Leakage Current
DO-214AA (600 W) / SMBJ

Technical Data:
Test Test
VBR VClamp
824520162 824521162 PP EP 160 187.5 259 2.3
824520202 824521202 PV EV 200 235.5 324 1.9
824520222 824521222 PX EX 220 259 356 1.7
824520252 824521252 PZ EZ 250 294 405 1.5
1 mA ±5 % IPEAK 1
824520302 824521302 QE FE 300 353 486 1.3
824520352 824521352 QG FG 350 411.5 567 1.1
824520402 824521402 QK FK 400 470.5 648 0.9
824520442 824521442 QM FM 440 517.5 713 0.9

DO-214AB (1500 W) / SMCJ
EMC Components
Technical Data:
Test Test
VBR VClamp
824540162 824541162 GHP PHP 160 187.5 259 5.8
824540202 824541202 GHV BHV 200 235.5 324 4.6
824540302 824541302 CJE BJE 300 353 486 3.1
824540352 824541352 GJG BJG 350 411.5 567 2.6
1 mA ±5 % IPEAK 1
824540222 824541222 CHX BHX 220 259 356 4.2
824540252 824541252 CHZ BHZ 250 294 405 3.7
824540402 824541402 GJK BJK 400 470.5 648 2.3
824540442 824541442 GJM BJM 440 517.5 713 2.1
DO-214AB (3000 W) / SMDJ

Technical Data:
Test Test
VBR VClamp
824550162 824551162 PHP DHP 160 187.5 259 11.6
824550202 824551202 HHX IHX 200 235.5 1 mA ±5 % 324 IPEAK 9.3 2
824550222 824551222 HIE IIE 220 259 356 8.4

WE-CSGS
Contact Spring Gasket
■ Customizable product series (dimension; profile; ■ Displays
plating; raw material) ■ Metal housing
■ Low compression force needed ■ Switching cabinets
■ High conductivity ■ EMC chambers
■ Beryllium copper with nickel plating as standard
■ Operating temperature: -40 ºC up to +110 ºC
More sizes available:

More sizes available
www.we-online.com/we-csgs
Technical Data:
Recommended Recommended
W H RS
Order Code Compression min. Compression max.
(mm) (mm) (Ω)
(mm) (mm)
3851020 27.18 5.97 4.776 4.4775
3851120 27.18 5.97 4.776 4.4775
3851200 15.24 5.59 4.472 4.1925
3851150 15.2 3.1 2.48 2.325
3851140 11.4 3 2.4 2.25
3851230 11.4 2.2 1.76 1.65
3851010 11 3.88 3.104 2.91
0.05
3851260 9.4 3.3 2.64 2.475
3851220 8.9 2.8 2.24 2.1
3851190 8.13 2.8 2.24 2.1
3851250 8.13 2.79 2.232 2.0925
3851180 8.13 2.79 2.232 2.0925
3851240 4.19 1.5 1.2 1.125
3851270 4.13 1.2 0.96 0.9
W: Width; H: Height; RS: Surface Resistance

WE-EGS
EMI Elastomer Gasket
EMC Components
conductive filler; rubber material) ■ Metal housings
■ Conductive filler cickel carbon mixed with silicone as ■ Switching cabinets
standard ■ Applications in wet enviroments
■ Depending on the application an IP68 protection
class could be reached, that means by the use of
the shielding gasket a total protection against dust
(index 6) and protection against full inmersions
under high pressure (index 8)
More sizes & profiles available Check all sizes:

www.we-online.com/we-egs
Hollow D Profile
Technical Data:
Recommended Recommended
H W RS
Order Code Compression min. Compression max.
(mm) (mm) (Ω)
(mm) (mm)
38401309 – – 7.2 6.3
38401210 1.57 19.05 1.256 1.099
38401211 1.57 22.35 1.256 1.099
38401207 1.91 12.7 1.528 1.337
38401208 3.18 12.7 2.544 2.226
38401209 4.78 12.7 3.824 3.346 0.05
38401503 5.72 3.2 4.576 4.004
38401506 5.94 8.31 4.752 4.158
38401005 7.92 7.92 6.336 5.544
38401004 7.92 7.92 6.336 5.544
38401006 8.23 12.37 6.584 5.761
H: Height; W: Width; RS: Surface Resistance

WE-SHC
Shielding Cabinet
plating; raw material) ■ Metal housings
■ Low compression force needed ■ Switching cabinets
■ High conductivity ■ EMC chambers
■ Beryllium copper with nickel plating as standard
Fully enclosed shield for

www.we-online.com/we-shc
high frequency applications
Technical Data:
Order Code W (mm) H (mm)
3670087 6.3 3
3671087 6.9 2.7
3670128 12.3 7.5
3671128 12.7 3.5
3670168 13.5 5
3671168 13.9 3
3670453 16.2 6
3671453 16.8 2.9
3670415 16.8 6.8
3670223 17.3 5
3671415 17.4 4
3671223 17.7 4
3670206 17.8 3
3670308 17.8 4.4
3671206 18.4 2.7
3671308 18.4 4.4
3670213 19.9 2.9
3672213 20.3 2.5
3671213 20.3 2.5
3670260 23 7.8
3670345 23.3 3.5
3670473 23.3 5.3
3672260 23.6 4
3671260 23.6 4
3670323 23.8 3.7
3672345 23.9 3.3
3671345 23.9 3.3
3671473 23.9 3.5
3672473 23.9 3.5
3670544 23.9 7.5
3671323 24.4 4
3672323 24.4 4
3671544 24.5 5

Technical Data:
EMC Components
Order Code W (mm) H (mm)
3670290 26 3
3671290 26.6 2.9
3670737 28.1 2.9
3671737 28.7 3
3670382 33.3 5
3671382 33.9 3
3670366 34.1 3.3
3671366 34.5 2.8
3670585 49.7 4.7
3671585 50.3 3
W: Width; H: Height

Design Kits
Product Category Design Kit Order Code Lifelong Refill

Ferrites for PCB Assembly
WE-CBF 0402, 0603, 0805; SMT Ferrites 742790
WE-CBF 1206, 1210, 1806, 1812; SMT Ferrites 742791
WE-CBF HF 0402, 0603; SMT Ferrites for High Frequency Applications 742841
WE-MPSB, WE-PBF, WE-SUKW & WE-CMS; PCB Ferrites for Inrush Peak Currents 742793
Ferrites for Cable Assembly
Snap Ferrites 742711
WE-AFB; Axial Ferrite Beads 742700
WE-FLAT; Flat Ferrite Cores 742722
WE-TOF; EMI Suppression Toroidal Ferrites 742701
Filter Chokes
WE-FI; Toroidal Line Chokes 744705
WE-MI; SMT Multilayer Inductors 744790
WE-SD; Rod Core Chokes 744713
Common Mode Chokes
SMT Common Mode Line Filters 744725
WE-CMB & WE-CMBH; Common Mode Power Line Chokes 744825
WE-CMB, WE-CMB HC, WE-CMB NiZn, Common Mode Power Line Chokes 744821
WE-CMBNC; Common Mode Power Line Chokes 744800
WE-CNSW & WE-CNSW HF; SMT Common Mode Line Filters 744230
WE-ExB, WE-CMB & WE-CMBNC 744824
WE-LF; Common Mode Power Line Chokes 744630
WE-TFC, WE-TFCH, WE-FC; Power Line Common Mode Filters 744864

EMC Components
ESD Protection
ESD Protection 823999
Surge Protection
WE-TVSP, TVS Power Diodes Low Power 824599
WE-TVSP; TVS Power Diodes High Power 824598
WE-VD; Disk Varistors 820999
WE-VS; SMT Varistors 825998
EMC Shielding Solutions
Shielding Cabinets 361999
ShielDIY Do It Yourself Custom Shielding Cabinets 360002
WE-FAS / WE-FSFS 304999
WE-SECF; SMT EMI Contact Fingers 331001
EMC Filter
Design Your EMC-Filter 744998
EMC General
Interfaces; USB 2.0 / 3.0 / 3.1, Ethernet 100/1000 Base-T, CAN, VGA, HDMI, RS232, RS485 744999

1 PASSIVE COMPONENTS  EMC Components  Focus Product
Focus Product
Innovative Design:
WE-SHC Seamless
Seamless Shielding Cabinets
Ready for New Technologies!
The new WE-SHC Seamless are especially designed for 5G, IoT,
GNSS and microwave electronics applications. This product is
produced through a deep drawing method in order to achieve a fully
enclosed shield, in this way the faraday cage effect provided by
these cabinets is increased, in particular in higher frequencies on IoT GNS
which new technologies are working in.
E specially well suited for 5G, IoT, IO-Link Wireless and

GNSS applications
Fully sealed, seamless corners and no open slots to provide
an exceptional faraday cage effect
Customizable product series (dimension; profile; plating;
raw material)
To save costs and speed up your project, we offer you a wide
range of sizes available ex stock
WE-SHC Seamless: Over 100 sizes available ex stock to find

Effective until more than 60 GHz exactly the right cabinet for your application
Effective Frequency Range
Seamless WE-SHC
> 60 GHz
Standard WE-SHC
3 – 5 GHz*
* Shielding effectiveness lower at 5 GHz

EMC Components
Seamless design for better
shielding effectiveness
Standard in plated steel
Improved oxidation resistance

due to deep drawing production
High quality clip on system
Designed for pick & place
Fully closed pad improving

faraday cage effect
WE FIT YOUR SHIELD
Customize your shielding cabinets and
many other shielding products to achieve
the optimal result for your application:
www.we-online.com/customized-we-shc
Learn more about WE-SHC Seamless:

www.we-online.com/we-shc-seamless

1 PASSIVE COMPONENTS  EMC Components  Basic Knowledge
Common Mode Chokes
Common Mode Behaviour Differential Mode Behaviour
Huge Common Mode Attenuation!

Current Magnetic field Current Magnetic field
When the common mode component of a signal tries to go In opposition to the common mode behaviour, the differential
through the choke, it will meet a high impedance, due to the mode component of the signal will see almost no impedance
inductance created by the magnetization of the core and the in the choke, this phenomenon could be explained with the
coils. magnetic field compensation inside the core. If the core is
not magnetized, then no inductance will appear in the line.
Winding Styles for Different Applications
Bifilar winding: Shows the Sectional winding: Shows the

lowest attenuation in differential highest attenuation in differential
mode. These chokes are mode. This chokes are recom-
recommended for data lines, mended for power lines, where a
where a high isolation is not high isolation is mandatory and
needed and some high speed the power delivery is happening
signals are involved. at low frequency.
Compare the two techonologies in REDEXPERT:

www.we-online.com/redexpert-winding-styles

EMC Components
Comparison Winding Style
Insertion Loss
Frequency
WE-CMB WE-FC
A division of the winding space in separate chambers (see

WE-FC, 2 chambers on each winding) reduces the intrawinding Compare the two series in REDEXPERT:
capacitance increasing the bandwith of the choke. The current www.we-online.com/redexpert-compare-cmb-fc
capabilities will be reduced due to the smaller winding space.
Comparison Core Material

Attenuation (dB)
Frequency (Hz)
Manganese-Zinc Manganese-Zinc & Nickel-Zinc

Nanocrystalline Nickel-Zinc
Compare the different materials for our chokes

in REDEXPERT:
www.we-online.com/redexpert-compare-core-material

1 PASSIVE COMPONENTS  EMC Components  Basic Knowledge
SMD EMI Suppression Ferrite Beads
Characterisation High Speed High Current

SMD Ferrites SMD Ferrites
Have lower impedance in Are designed for high current
the lower frequency ranges. (over 1 A). The rated current
Therefore they have only a low refers to 40 K self-heating.
attenuation on fast signals. Application e.g. power supply,
Impedance (Ohm)
Application e.g. USB, IEEE DC/DC converter.

1394, LVDS
Wide Band High Frequency

SMD Ferrites SMD Ferrites
Frequency (MHz) Show already high impedance in Have, due to a modified internal
High Current (1000 mA –10050 mA) High Frequency (50 mA – 600 mA) low frequency range. Therefore layout, an increased effective
Wide Band (50 mA – 500 mA) High Speed (100 mA – 700 mA)
they are wide band through the suppression frequency range.
whole spectrum. Application e.g. Consequently the impedance at
control signals, RS232, RS422, 1 GHz is up to 3 times higher.
DC/DC converter. Application e.g. HDD, fast bus
signals and clock signals.
WE-MPSB
Multilayer Power Suppression huge peak

Peak current is up to 20-times higher than rated current
Up to 40 % higher rated current compared with similar products
strong bead!
The Maximum Allowed Current Varies Specified Inrush Peak Current Rating Protects
with Pulse Length and Extends the Life of Your Application
110 0603: 110 Ω
100
0805: 80 Ω
Max. Pulse Current [A]
90
1206: 110 Ω
80 WE-MPSB specification
1812: 100 Ω
Current
70
60 2220: 100 Ω
50 3312: 100 Ω typical
40 specification
30
20
typical inrush current
10
0 1 2 3 4 5 6 7 8 Time
Pulse Length [ms]
Wired SMT Ferrite generally resistant to peak current up to a

More information:
pulse length of 100 ms with 100 A. Check WE-PBF, WE-CMS
www.we-online.com/mpsb
and WE-SUKW.

EMC Components
Impedance vs. Frequency Cable Ferrites
60
1Ω
10 Ω
50
50 Ω
90 Ω
40
Attenuation (dB)
30
20
10
0
1 10 100 1000
Impedance of the ferrite (Ω)
Relationship between the number

of winding turns and the impedance See all ferrites with different turns
across the frequency spectrum Go to REDEXPERT:
www.we-online.com/redexpert-different-turns
Impedance Determination in REDEXPERT
ZA + ZF + ZB
A (dB) = 20 log10
ZA + ZB
Determine the needed

impedance in REDEXPERT:
www.we-online.com/re-impedance
Derating Curve – Interpretation
Max. temperature allowed Tmax

ΔT = Tmax– TR
Example of use: The maximum ambient

temperature at maximum current is 70 °C . Derating curves for
At a higher ambient temperature the CMC in REDEXPERT:
current capabilities sink. For an ambient www.we-online.com/
temperature of 90 °C the current should redexpert-derating-
not be over 80 % of IR (0.9 Amps). curves-cmc

1 PASSIVE COMPONENTS  EMC Components  Additional Information
WE are your EMC Component Specialist
Würth Elektronik offers personal advice and support for your design-in and EMC questions, EMC products of all kinds as well as helpful
tools to speed up your design-in.
D-Sub Filter Connector

Cable
Ferrites
Capacitors
Common Conductive Ni / Cu

Mode Chokes Glass Fiber Woven
Clips
Chip Bead Ferrites

Shielding
Cabinets
EMI Shielding Tapes

Flexible Sintered
Ferrite Sheets
Varistors
Earthing Belts
More than Products – Our Services
PERSONAL WEBINARS APPLICATION

SUPPORT & SEMINARS NOTES
For all EMC questions and Technology and product Perfect to select the right EMC Find additional product and
issues we have the right specialists offer interesting component to solve your EMI application information in our
personal contact for you. webinars and seminars on all issue. App Notes.
aspects of EMC.
Explore our EMC portfolio:

www.we-online.com/emc-components

EMC Components
Technology is advancing at a tremendous rate and the next generation of devices are also shifting towards wireless applications.
The movement towards higher frequency, into the gigahertz range has begun. We support you to find the right components for your
HF application.
Our High Frequency Components for your Application
WE-SHC Seamless
Extremely WE-FAS
High Frequency WE-FSFS
30 GHz to 300 GHz WE-SHC
WE-CCMF
EMC Gaskets
Super WE-CNSW HF
High Frequency
3 GHz to 30 GHz WE-CBF HF WE-STAR-GAP
Ultra
High Frequency PCB Cable Common Common
300 MHz to 3 GHz Shielding Shielding
Ferrite Ferrite Mode Choke Mode Choke
Differential Differential /
Common Mode
Mode Common Mode
The Magic of High Frequency SMT Chip Bead Ferrites

Broadband amplifier 5 MHz – 5 GHz
Source
C3
L2
Amplifier
L1 Use our WE-CBF HF to
reproduce a wide range
C1 C2
RF IN RF of signals with low noise.
with DC-Block OUT
Your advantages:
Wide frequency range
Stable input and output impedances
Effective decoupling of the supply voltage Check out the App Note for more details
www.we-online.com/anp045

Signal Integrity and EMI
Signal Integrity and Increase in Data Speed

Signal integrity defines the quality of an electrical signal and refers to the challenges that arise due to high frequency data transmission. With
the high switching speeds of the modern digital I/O interfaces, we are now able to achieve high data rates and bandwidth. At the same time,
noise is a big concern for the integrity of these high frequency digital signals.
HDMI 2.0 / Thunderbolt 4 /

USB 3.1 Gen1 PCIe 3.0 USB 3.1 Gen2 PCIe 4.0
Sata 3.0 USB 4
5 Gbps 8 Gbps 10 Gbps 16 Gbps
6 Gbps 20 Gbps
Design and Layout Challenges with Fast Data Lines
Faster Data Rates Higher noise frequency Noise at 2.4 / 5.0 GHz Affected applications
The switching speeds of the With the increase in the Noise can interfere with the Wi-Fi 2.4 / 5 GHz
modern digital interfaces switching speeds of digital extremely sensitive wireless Bluetooth
are getting increasingly fast circuits like USB 3.2 or channels operating at GPS / GNSS
which translates to high HDMI 2.1, more and more 2.4 / 5.0 GHz bands. 3G, 4G & 5G
data rates and bandwidth. noise is being generated at communications
higher frequencies.
Communication Interfaces – source of noise

Noise can interfere with the extremely sensitive wireless channels
operating at 2.4 / 5.0 GHz bands.
Gaming
console HDMI 2
ommunication interfaces radiate noise on a very broad

C
SSD Type C
WiFi, Bluetooth spectrum which can interfere with the wifi signal
antenna This can lead to loss of the Wi-Fi signal
LCD/TV HDMI
USB port
USB 3 cable External HDD
Webinar Extremely High Data Line Chokes:

www.we-online.com/datalinewebinar

EMC Components
Signal Integrity – Don’t lose your useful signal
ommon mode Filters / Chokes are a very effective way of
C
protecting the data lines against noise interference, while
reducing emissions at the same time.
hoosing the appropriate common mode choke for a
C
high-speed differential interface requires knowledge about
both the application and the filter itself.
ifferential mode cut-off frequency (also known as 3dB
D
frequency) is one of the most important criteria for the choke
selection and can be evaluated with the help of s-parameters
Next Generation Common Mode Chokes for High Speed Data Lines
WE-CCMF 0 dB
Ceramic Common Mode Filter
-10 dB
Insertion Loss
-20 dB
eramic based choke that works on the principle of the trans-
C
mission line theory -30 dB
Complex inner resonant structure ensures high common mode -40 dB

suppression at wireless frequencies (2.4 & 5.0 GHz) -50 dB
Keeps the differential signal intact
-60 dB
0 GHz 2 GHz 4 GHz 6 GHz 8 GHz 10 GHz
Frequency
748030024 – Common Mode 748032455 – Common Mode
748030024 – Differential Mode 748032455 – Differential Mode
WE-CNSW HF
0
SMT Common Mode Line Filter -5
-10
Insertion Loss (dB)
F errite-based core and winding symmetry chokes. -15
While the WE-CNSW can work up to USB 2.0 interfaces, the -20
-25
WE-CNSW HF version was designed to have wider band to be
-30
able to work with the newest high speed interfaces such as USB
-35
3 1 Gen 1 and Gen 2. Wider common mode attenuation band
-40
before the cut-off-frequency (-3 dB). 0 1 2 3 4 5 6 7 8 9 10
Frequency (GHz)
Wide variety of applications include USB 2.0, USB 3.1,
WE-CNSW-HF – Differential Mode WE-CNSW – Differential Mode
HDMI and other. WE-CNSW-HF – Common Mode WE-CNSW – Common Mode
Learn more:
www.we-online.com/cmc

EMC Shielding Solutions
Low impedance connections
EMC housing sealing
EMI source / victim shielding
Magnetic absorption /
decoupling
Product portfolio and more

information:
www.we-online.com/shielding
EMC Accesories Board Level Shielding
EMC Tapes One piece solution

Grounding Connections Two pieces solution (frame + cover)
DIY shielding cabinet (ShielDIY)
Fit your shield: custom dimensions,
material, SMT / THT
EMC Gaskets EMI Patch
Fabric over foam (WE-LT) Magnetic absorber (WE-FAS)

Conductive elastomer (WE-EGS) Ferrite sheet (WE-FSFS)
Metal contact spring (WE-CSGS) Thermally conductive absorber
Wire mesh over foam (WE-GS) (WE-FAS TC)
Fit your shield: custom length, adhesive Fit your shield: custom size, shape
WE Fit your Shield

PROTOTYPING SERVICE | CUSTOMIZATION | APPLICATION ADVISING | FAST SAMPLING

Find Your EMC Gasket
EMC Components
Selection Steps to the Right EMC Gasket
Finding the right EMC gasket can be a long and tedious process – with these major points, we make it easy to choose the most suitable
EMC gasket.
WE-EGS WE-LT WE-CSGS WE-GS

Protection
Ingress
IP68 IP54 IP20 IP40

High protection for Low protection for Nearly no protection Protected against particles of
normal applications normal applications for normal applications more than 1 mm diameter
+ + + + + + + + +
Force Needed
Compression
High Medium Low High

Compression Force Compression Force Compression Force Compression Force
Fixed applications, high General applications Applications which require Fixed applications, high
sealing effect needed open & close function sealing effect needed
Attachment
Method
Mechanical Force Adhesive Tape Clip On & Screw Hole Mechanical Force
Compressible Conductive Conductive / Elastic Beryllium Copper Alloy Knitted Monel Wire Over
Elastomer Material Non-Conductive PSA with Nickel plating Elastomer Material
Application examples: Application examples: Application examples: Application examples:
O-Rings for I/O entries, not environmental exposed housing, EMC chambers, industrial Industrial ovens, rough
highly sealed housings, etc. medium sealed housing, etc. ovens, etc. environments
Temperature
-50 °C to +150 °C -40 °C to +85 °C -40 °C to +120 °C -30 °C to +80 °C

Operating
Range
Highest temperature range Low temperature range Medium temperature Low temperature range
for extreme temperatures for general applications temperature range for for general applications
extended needs
You have special requirements?

Check our complete portfolio online and customize your shielding
to achieve the most optimal solution for your application. Our portfolio::
www.we-online.com/shielding
Not found the right product? Customize your shielding now!

Select EMC Components

in REDEXPERT
Find the Perfect Match Between Common and Differential Mode
Impedance to Ensure Signal Integrity of the Application.
Filter for electrical and mechanical parameters
Get chart data out of the lab
Direct access to certificates and datasheets
Read out chart values in the product table
Calculate attenuation by entering system parameters
Check temperature derating to make sure the current can be handled
Enter your desired attenuation and frequency and REDEXPERT will propose
suitable ferrites and common mode chokes based on system model calculations.
Try it out:
www.we-online.com/redexpert-emc-components

Power Magnetics
Power Magnetics
Product Overview 57
Products 60
Design Kits 68
53
1 PASSIVE COMPONENTS  Power Magnetics
Storage Applications:
Power Inductors for SMPS
Single Coil Power Inductors THT
Rated Current Range Switching Frequency Range
10 mA 100 mA 1A 10 A 100 A Series 10 kHz 100 kHz 1 MHz 10 MHz
1 ~ 68000 μH WE-TI Unshielded
100 ~ 10000 μH WE-TIF Unshielded
1.3 ~ 8200 μH WE-TIS Shielded

THT
3 ~ 22 μH WE-FAMI Shielded
1.5 ~ 65 μH WE-HCFT Shielded
12 ~ 1619 μH WE-SI Shielded
Single Coil Power Inductors SMT

0.22 ~ 10 μH WE-PMI Shielded > 10 MHz
0.24 ~ 2.2 μH WE-PMCI Shielded
0.1 ~ 1000 μH WE-GF Unshielded
1 ~ 220 μH WE-GFH Unshielded
1 ~ 2200 μH WE-LQ Unshielded
0 .16 ~ 10000 μH WE-LQS Shielded
0 .47 ~ 10 μH WE-LQSH Shielded
1 ~ 470 μH WE-LQFS Shielded
0.33 ~ 47 μH WE-MAPI Shielded > 10 MHz

SMT
0.056 ~ 1500 μH WE-TPC Shielded
0.3 ~ 33 μH WE-TPC Shielded
0.22 ~ 100 μH WE-SPC Shielded
0.47 ~ 2200 µH WE-PD Shielded
1 ~ 1000 μH WE-PD Shielded
1 ~ 2200 μH WE-PD2 Unshielded
1.2 ~ 220 μH WE-PD2SR Shielded
1 ~ 1000 μH WE-PD3 Shielded
1 ~ 470 μH WE-PD3 Shielded

0.47 ~ 1000 μH WE-PD4 Unshielded
1 ~ 10000 μH WE-PD4 Unshielded
Power Magnetics
0.22 ~ 27 μH WE-PDF Shielded
0.13 ~ 82 μH WE-HCI Shielded

SMT
0.22 ~ 10 μH WE-HCC Shielded
0.22 ~ 4.7 μH WE-HCC Shielded
0.7 ~ 680 μH WE-HCF Shielded
0.025 ~ 1.5 μH WE-HCM Shielded
0.18 ~ 33 μH WE-XHMI Shielded
0.1 ~ 100 μH WE-LHMI Shielded
Coupled Inductors
7 ~ 25 μH WE-EHPI Shielded
0.33 ~ 22 μH WE-TDC Shielded
1.3 ~ 470 μH WE-DD Shielded
0.091 ~ 100 μH WE-DCT Shielded
0.8 ~ 10 μH WE-CFWI Shielded

SMT
1 ~ 47 μH WE-DPC Shielded
1 ~ 47 μH WE-DPC HV Shielded
1 ~ 47 μH WE-MCRI Shielded
10 ~ 33 μH WE-MTCI Shielded
5.6 ~ 33 μH WE-TDC HV Shielded

Storage Applications:
Power Inductors for SMPS
Inductors for Audio Amplifiers
SMT THT
8.2 ~ 22 μH WE-HIDA Shielded
8.2 ~ 22 μH WE-LHMD Shielded
High Voltage Inductors THT

THT
220 ~ 3300 μH WE-TI HV Unshielded
High Voltage Inductors SMT

47 ~ 6800 μH WE-PD HV Shielded

SMT
560 ~ 2200 μH WE-PD2 HV Unshielded
Iron Powder (Fe)

Nickel-Zinc (NiZn)
Superflux
Metal Alloy
WE-PERM®
Manganese-Zinc (MnZn)
Nickel-Zinc / Manganese-Zinc (NiZn / MnZn)
Hyperflux®
Nickel-Zinc / Manganese-Zinc / Metal Alloy (NiZn / MnZn / Metal Alloy)
® Registered European Trademark

Product Overview

Power Magnetics
WE-PD
Single Coil Power Inductors

WE-PMI WE-MAPI WE-PD4
L: 0.11 ~ 10 μH L: 0.33 ~ 47 µH L: 0.47 ~ 10000 µH
IR: 650 ~ 4000 mA IR: 0.39 ~ 9.6 A IR: 0.07 ~ 18 A
RDC: 7 ~ 500 mΩ RDC typ.: 6 ~ 2090 mΩ RDC: 0.002 ~ 39 Ω
WE-PMCI WE-TPC WE-HCI

L: 0.24 ~ 2.2 µH L: 0.056 ~ 1500 µH L: 0.13 ~ 82 µH
IR: 1200 ~ 3600 mA IR: 0.08 ~ 8.5 A IR: 3.5 ~ 41.5 A
RDC: 19 ~ 170 mΩ RDC: 0.0035 ~ 9 Ω RDC: 0.35 ~ 34.5 mΩ
WE-GF WE-SPC WE-HCC

L: 0.1 ~ 1000 µH L: 0.22 ~ 100 µH L: 0.22 ~ 10 μH
IR: 30 ~ 450 mA IR: 0.40 ~ 5.30 A IR: 4.4 ~ 27 A
RDC: 0.32 ~ 50 Ω RDC: 0.014 ~ 1.133 Ω RDC: 1.1 ~ 38.5 mΩ
WE-GFH WE-PD Extended WE-HCF

L: 1.0 ~ 220 µH L: 0.47 ~ 1500 µH L: 0.7 ~ 680 μH
IR: 160 ~ 1600 mA IR: 0.2 ~ 23.5 A IR: 4.8 ~ 56 A
RDC: 81 ~ 9126 mΩ RDC: 0.003 ~ 9.44 Ω RDC: 0.44 ~118.3 mΩ
WE-LQ WE-PDF Extended WE-HCFT

L: 1 ~ 2200 µH L: 0.22 ~ 27 μH L: 1.5 ~ 65 μH
IR: 0.04 ~ 1.8 A IR: 4.3 ~ 19 A IR: 17.2 ~ 75 A
RDC: 0.08 ~ 63 Ω RDC: 1.95 ~ 42.5 mΩ RDC: 0.34 ~ 13.13 mΩ
WE-LQS WE-PD2SR WE-HIDA

L: 0.16 ~ 10000 µH L: 1.2 ~ 220 μH L: 8.2 ~ 22 μH
IR: 0.13 ~ 8 A IR: 0.67 ~ 4.85 A IR: 5.7 ~ 19 A
RDC: 6 ~ 22800 mΩ RDC typ.: 8.5 ~ 743 mΩ RDC: 2.5 ~ 14.8 mΩ
WE-LQSH WE-PD2 WE-LHMD

L: 0.47 ~ 10 μH L: 1 ~ 2200 µH L: 8.2 ~ 22 μH
IR: 0.58 ~ 4.5 A IR: 0.18 ~ 7.4 A IR: 2~7A
RDC: 18 ~ 816 mΩ RDC: 0.004 ~ 12.5 Ω RDC: 16 ~ 104 mΩ
WE-LQFS WE-PD3 Extended WE-HCM

L: 1.0 ~ 470 μH L: 1 ~ 1000 µH L: 0.025 ~ 1.5 μH
IR: 0.26 ~ 4.47 A IR: 0.19 ~ 3.9 A IR: 23 ~ 70 A
RDC: 21 ~ 2803 mΩ RDC: 0.027 ~ 3.2 Ω RDC: 0.114 ~ 0.7 mΩ

Product Overview
Single Coil Power Inductors Dual Coil Power Inductors Wireless Power Transmission
WE-XHMI WE-EHPI WE-WPCC Wireless Power
L: 0.18 ~ 33 μH L: 7.5 ~ 75000 µH Transmitter Coil
IR: 4.7 ~ 20.0 A IR: 0.0035 ~ 2.29 A L: 2.8 ~ 24 µH
RDC: 1.32 ~ 31.0 mΩ RDC: 1.5 ~ 1.9 mΩ Q: 30 ~ 220
Frequency Range: 0.05 ~ 5 MHz Frequency Range: 0.001 ~ 0.3 MHz IR: 2.0 ~ 18 A
RDC: 10 ~ 255 mΩ
WE-LHMI WE-TDC
L: 0.1 ~ 100 µH L: 0.33 ~ 22 µH WE-WPCC Wireless Power Array
IR: 1 ~ 32.5 A IR: 0.7 ~ 4.5 A L: 6.4 ~ 12.5 µH
RDC: 0.60 ~ 500 mΩ RDC: 0.0145 ~ 0.48 Ω µHQ: 100 ~ 145
Frequency Range: 0.05 ~ 5 MHz Frequency Range: 0.01 ~ 10 MHz IR: 8.0 ~ 10.0 A
RDC: 38 ~ 56 mΩ
WE-FAMI WE-DD
L: 3.0 ~ 22.0 µH L: 1.3 ~ 470 µH WE-WPCC Wireless Power
IR: 3.7 ~ 14.5 A IR: 0.3 ~ 8.6 A Receiver Coil
RDC: 3.1 ~ 30.9 mΩ RDC: 0.011 ~ 1.73 Ω L: 1.4 ~ 47.0 µH
Frequency Range: 0.01 ~ 10 MHz Frequency Range: 0.1 ~ 10 MHz Q: 10 ~ 50
IRR: 0.40 ~ 5.0 A
WE-TI WE-DCT RDC : 0.08 ~ 1200 Ω
DC
L: 1 ~ 68000 µH L: 0.091 ~ 100 µH
IR: 0.05 ~ 8.5 A IR: 1.1 ~ 14.5 A WE-WPCC WPT / NFC
RDC: 0.006 ~ 90.8 Ω RDC: 3.5 ~ 290 mΩ Combination Coil
Frequency Range: 0.1 ~ 10 MHz Frequency Range: 0.05 ~ 3 MHz L: L1 = 6.3 ~ 24 µH
L2 = 0.7 ~ 1.6 µH
WE-TIF WE-CFWI Q: Q1 = 19 ~ 125
L: 100 ~ 10000 µH L: 0.8 ~ 4.4 µH Q2 = 47 ~ 82
IR: 0.21 ~ 2.6 A IR: 12.0 ~ 28 A IR: IR1 = 6 ~ 7.5 A
RDC: 0.075 ~ 9.3 Ω RDC: 1.6 ~ 9.6 mΩ IR2 = 2.6 ~ 50 A
Frequency Range: 0.1 ~ 10 MHz Frequency Range: 0.1 ~ 3 MHz RDC: RDC1 = 0.048 ~ 0.4 Ω
WE-TIS WE-DPC RDC2 = 0.03 ~ 0.1 Ω
L: 1.3 ~ 6800 µH L: 1 ~ 47 µH
IR: 0.05 ~ 8.5 A IR: 0.9 ~ 4.5 A
RDC: 0.007 ~ 40 Ω RDC: 25 ~ 350 mΩ
Frequency Range: 0.1 ~ 10 MHz Frequency Range: 0.1 ~ 10 MHz
WE-SI WE-MTCI
L: 12 ~ 1619 μH L: 10 ~ 297 µH PFC Chokes
IR: 0.5 ~ 5 A IR: 0.45 ~ 0.95 A
RDC: 0.008 ~ 0.7 Ω RDC: 349 ~ 5200 mΩ WE-PFC
Frequency Range: 0.01 ~ 0.1 MHz Frequency Range: 0.1 ~ 3 MHz L: 150 ~ 1800 μH
IR: 0.3 ~ 3.0 A
WE-PD HV WE-DPC HV RDC1: 78 ~ 1550 mΩ
L: 220 ~ 3300 μH L: 1 ~ 47 µH RDC2: 140 ~ 1200 mΩ
IR: 0.24 ~ 1.30 A IR: 0.6 ~ 2.9 A
RDC: 0.30 ~ 6.5 Ω RDC: 32 ~ 1.200 mΩ
WE-PD2 HV WE-CPIB HV
L: 560 ~ 2200 μH L: 4.7 ~ 47 μH
IR: 0.15 ~ 0.41 A IR: 0.55 ~ 1.45 A
RDC: 1.77 ~ 6 Ω RDC: 105 ~ 1.000 mΩ
WE-TI HV WE-TDC HV High Performance 1:1 High Voltage

L: 220 ~ 3300 µH L: 5.6 ~ 33 μH
IR: 0.25 ~ 0,9 A IR: 0.75 ~ 1.4 A Consumer 1:1 High Current
RDC: 0.5 ~ 5.9 Ω RDC: 190 ~ 700 mΩ
Frequency Range: 0.05 ~ 1 MHz Frequency Range: 0.1 ~ 10 MHz Low Profile High Voltage
WE-MCRI High Current 1:N Multi Turns Ratio
L: 1 ~ 47 µH
IR: 1.5 ~ 17 A SEPIC THT Inductors
RDC: 4.5 ~ 240 mΩ
Frequency Range: 0.1 ~ 3 MHz Class D All Purpose

Power Transformers
WE-FLEX WE-UNIT
suitable for all switch mode power Ui: 85 ~ 265 Vac
supply topologies like: Buck-Converter, UO1: 5 ~ 24 V
Boost-Converter, SEPIC-Converter, IO1: 0.13 ~ 2.0 A
Flyback-Converter, Forward-Converter
Power Magnetics
and Push-Pull-Converter WE-GDT
L: 260 ~ 650 µH
WE-FLEX+ RDC1: 520 ~ 1200 mΩ
suitable for all switch mode power RDC2: 150 ~ 600 mΩ
supply topologies like: Buck-Converter, RDC3: 170 ~ 600 mΩ
Boost-Converter, SEPIC-Converter,
Flyback-Converter, Forward-Converter WE-GDTI
and Push-Pull-Converter L: 735 ~ 1800 µH
RDC1: 1000 ~ 1600 mΩ
WE-FLEX HV RDC2: 600 ~ 1300 mΩ
suitable for all switch mode power RDC3: 650 ~ 1300 mΩ
supply topologies like: Buck-Converter,
Extended WE-CST
Boost-Converter, SEPIC-Converter,
Flyback-Converter, Forward-Converter for Switch Mode Power Supply and
and Push-Pull-Converter AC current detection
WE-PoE
NEW WE-AGDT
suitable for Power over Ethernet ICs
Input Voltage: 9 – 18 V ~ 18 – 36 V
Output Unipolar: 15 V ~ 20 V
Output Bipolar: +15 V / -4 V
WE-PoE+ Interwinding Capacitance: 6.8 pF
Compliant with the 30W PoE+ objecti- Total Output Power: Up to 6 W
ves of IEEE802.3at
Suitable for PoE+ powered devices
WE-PoEH
- PoE and PoE+ powered devices
- Flyback or Forward Transformer
- d esigned for 12 V, 24 V or 48 V input
of Switching Mode Power Supply
WE-FB
for LT3573, LT3751, LT3574, LT3575,
LT3748
All Power Magnetic Components at a glance:

WE-UOST
Ui: 85 ~ 265 Vac
www.we-online.com/power-magnetics
UO1: 5 ~ 24 V
IO1: 0.56 ~ 3.0 A
WE-LLCR
Ui: 360 ~ 400 Vdc
Uo: 12, 24 or 48 Vdc Explore our application notes for Power Magnetics:
P: 150, 200 or 250 W

 PCB library: Altium Designer, EAGLE, Cadence
OrCAD & Allegro, Zuken CAD-Star
 S-Parameter & SPICE model: S-Parameter,
LTspice, PSpice, Spectre
Modelithics

1 PASSIVE COMPONENTS  Power Magnetics  Products
WE-HCF
SMT High Current Inductor
■ Inductance values up to 2 µH ■ POL regulator for FPGA / ASIC / GPU
■ Saturation current up to 56 A ■ High current DC/DC converter
■ Low core losses (MnZn) ■ Forward converter (output inductor)
■ 3-pin SMT to ensure mechanical stability ■ Half-bridge and full-bridge converters (e.g. current
■ Magnetically shielded doubler)
■ Operating temperature: -40 °C up to +125 °C ■ Battery chargers and inverters
www.we-online.com/we-hcf
Size 2010
Technical Data:
L IR ISAT RDC typ. RDC max. fres
Order Code Tol. L
(µH) (A) (A) (mΩ) (mΩ) (MHz)
7443642010100 1 56 44
7443642010120 1.2 ±20 % 45 47 0.84 0.92 42
7443642010200 2 30 30
L: Inductance; Tol. L: Inductance (Tol.); IR: Rated Current; ISAT: Saturation Current; RDC typ.: DC Resistance; RDC max.: DC Resistance max; fres: Self Resonant Frequency

WE-HCFT
THT High Current Inductor
■ Inductance values ranging from 1 µH to 10 µH ■ POL regulators for FPGA / ASIC / GPU
■ Saturation current up to 33 A ■ High current DC/DC Converters
■ Very low profile (height < 4mm) ■ Forward converter (output inductor)
■ Low core losses (MnZn) ■ Half-bridge and full-bridge converters (e.g.
■ Magnetically shielded current-doubler)
■ THT version ■ Battery chargers and inverters
Power Magnetics
www.we-online.com/we-hcft
Size 2504
Technical Data:
Order Code Tol. L
(µH) (A) (A) (mΩ) (mΩ) (MHz)
7443762504010 1 39 33 0.86 0.95 38
7443762504022 2.2 30 23.8 1.78 1.96 23
7443762504047 4.7 ±20 % 24 14 2.77 3.05 14.5
7443762504068 6.8 20 12.6 4.21 4.63 11
7443762504100 10 20 8.8 4.21 4.63 8.4
L: Inductance; Tol. L: Inductance (Tol.); IR: Rated Current; ISAT: Saturation Current; RDC typ.: DC Resistance; RDC max.: DC Resistance max.; fres: Self Resonant Frequency

WE-HCM
SMT High Current Flat Wire Inductor
■ Low core losses (MnZn) ■ Multiphase switching regulators
■ Extremely low RDC ■ CPU / RAM / FPGA power supply
■ RDC Tol.: ±10 % ■ Power PC
■ Operating temperature: -40 °C up to +125 °C ■ Graphic cards
■ Convertible notebooks
www.we-online.com/we-hcm
Size 4030
Technical Data:
L IR ISAT RDC fres
Order Code Tol. L Tol. RDC
(µH) (A) (A) (mΩ) (MHz)
744340300025 0.025 45 180
744340300030 0.03 44 170
±15 % 27 0.27 ±15 %
744340300055 0.055 24 123
744340300075 0.075 20 106
L: Inductance; Tol. L: Inductance (Tol.); IR: Rated Current; ISAT: Saturation Current; RDC: DC Resistance; Tol. RDC: DC Resistance (Tol.); fres: Self Resonant Frequency
Size 4035
Technical Data:
L IR ISAT RDC fres
(µH) (A) (A) (mΩ) (MHz)
74434035007 0.07 17 85
±20 % 29 0.38 ±10 %
74434035010 0.1 16 69
Size 5030
Technical Data:
L IR ISAT RDC fres
(µH) (A) (A) (mΩ) (MHz)
74435030010 0.1 ±15 % 27 17 0.31 ±15 % 83
Size 9065
Technical Data:
L IR ISAT RDC fres
(µH) (A) (A) (mΩ) (MHz)
744300006 0.06 63 124
744300008 0.08 51 94
744300010 0.1 ±20 % 37 42 0.22 ±10 % 74
744300015 0.15 29 51
744300022 0.22 19 38

WE-PD
SMT Power Inductor
■ AEC-Q 200 qualified ■ Switched-mode power supplies from 0.01 W
■ Ultra low RDC and RAC up to 300 W
■ Highest possible saturation current based on ferrite ■ Integrated DC/DC converter
■ Suitable for switching frequencies up to 5 MHz ■ Ideal for switch mode power supplies with extremely
■ Temperature dependent parameter available on high efficiency (> 95 %)
REDEXPERT
Power Magnetics
www.we-online.com/we-pd
Size 1280
Technical Data:
Order Code Tol. L
(µH) (A) (A) (mΩ) (mΩ) (MHz)
7447707015 1.5 ±30 % 12 24 4.6 5.5 49.2
7447707022 2.2 ±30 % 11 20.5 5.7 6.8 41.7
7447707033 3.3 ±30 % 9.4 17.5 7.5 9 32.3
7447707047 4.7 ±30 % 8.5 15.5 8.5 10 28.8
7447707068 6.8 ±20 % 6.8 13 11.8 14 19.1
7447707100 10 ±20 % 5.6 11 18 21 15.1
7447707150 15 ±20 % 4.7 9 23 26.5 13.2
7447707220 22 ±20 % 4 7.4 31.5 36 10.2
7447707330 33 ±20 % 3.15 6.1 46.5 53 8.3
7447707470 47 ±20 % 2.9 5.1 55 63 7.2
7447707680 68 ±20 % 2.45 4.2 78 90 5.5
7447707101 100 ±20 % 2.1 3.5 105 120 4.3
7447707151 150 ±20 % 1.65 2.8 165 190 3.5
7447707221 220 ±20 % 1.35 2.35 240 265 2.9
7447707331 330 ±20 % 1.08 1.9 370 410 2.1
7447707471 470 ±20 % 0.93 1.6 490 540 1.9
7447707681 680 ±20 % 0.78 1.3 700 770 1.5
7447707102 1000 ±20 % 0.66 1.1 985 1090 1.2
L: Inductance; Tol. L: Inductance (Tol.); I R: Rated Current; ISAT: Saturation Current; RDC typ.: DC Resistance; RDC max.: DC Resistance max.; fres: Self Resonant Frequency

WE-CST
Current Sense Transformer
■ Tiny size and low profile ■ AC current detection
■ Surface mount ■ Switched-mode power supplies
■ Frequency up to 1 MHz ■ Overload sensing
■ Primary current rating up to 20 A ■ Load drop / shutdown detection
■ Up to 750 VAC isolation ■ Metering
■ Operating temperature: -40 °C up to +125 °C ■ Load measurements
■ High frequency current sensing
High rated current with tiny size www.we-online.com/we-cst
Size EE4.4
Technical Data:
L IR RDC1 max RDC2 max ∫Udt VT
Order Code n
(µH) (A) (mΩ) (Ω) (µVs) (VAC)
749252020 33 1:20 0.35 9
749252030 74 1:30 0.8 13.5
749252040 132 1:40 1.6 18
749252060 295 1:60 7 3 3.6 27 750
749252070 400 1:70 4.6 31.5
749252125 1280 1:125 13 56.2
749252150 1800 1:150 21 67.5
L: Inductance; n: Turns Ratio; IR: Rated Current; RDC1 max: DC Resistance 1; RDC2 max: DC Resistance 2; ∫Udt: Voltage-µSecond; VT: Insulation Test Voltage
Size EE5 SMT

Technical Data:
L IR RDC1 max RDC2 max ∫Udt VT
Order Code n
(µH) (A) (mΩ) (Ω) (µVs) (VAC)
749251020 80 1:20 0.2 10
749251030 180 1:30 0.48 15
749251040 320 1:40 0.9 20
749251050 500 1:50 1.4 25
20 0.75 500
749251060 720 1:60 1.75 30
749251070 980 1:70 2.2 35
749251100 2000 1:100 5.5 50
749251125 3000 1:125 6.5 68
L: Inductance; n: Turns Ratio; IR: Rated Current; RDC1 max: DC Resistance 1; RDC2 max: DC Resistance 2; ∫Udt: Voltage-µSecond; VT: Insulation Test Voltage

WE-AGDT
Auxiliary Gate Drive Transformer
■ Interwinding capacitance down to 6.8 pF ■ Industrial drives
■ Tiny surface mount EP7 package ■ AC motor inverters
■ Dielectric insulation up to 4 kV AC ■ Electric vehicles / e-mobility
■ Basic insulation ■ Powertrain
■ Safety: IEC62368-1 / IEC61558-2-16 ■ Battery chargers
■ Common control voltages for SiC MOSFET’s ■ Solar inverters
■ Flyback with primary side regulation ■ Data centers
■ Wide range input voltages 9 V to 36 V ■ Uninterruptible power supplies
Power Magnetics
■ High efficiency and very compact solution ■ Active power factor correction
■ Reference designs with Analog Devices and Texas ■ Switching power supplies
Instruments
■ Operating temperature:
Ultra low interwinding capacitance -40 °C up to +130 °C
for SiC MOSFETs and IGBTs
www.we-online.com/we-agdt
Size EP7
Technical Data:
Vin VOut1 VOut2 CWW fswitch PO
Order Code IC Reference
(V) (V) (V) (pF) (kHz) (W)
750317894 9 – 18 +15 -4 7 LM5180 3
750317893 9 – 18 +19 – 6.8 LM5180 3
750318208 18 – 36 +15 -4 7 LM5180 5
350
750318207 18 – 36 +19 – 8.2 LM5180 5
750318131 9 – 18 +15 -4 7.5 LT8302 6
750318114 9 – 18 +19 – 6.8 LT8302 6
Vin: Input Voltage; VOut1: Output Voltage 1; VOut2: Output Voltage 2; CWW: Interwinding Capacitance; fswitch: Switching Frequency; PO: Total Output Power

WE-WPCC
Wireless Power Transfer Coil
■ Litz wire and high quality ferrite for highest Q and ■ Portable devices used in a clean area, where
maximum power transfer efficiency connectors pose a risk of polluting, e.g. medical
■ Based on Qi standard facilities, (industrial) clean rooms, mining industry
■ Applicable for Qi (5 & 15 W) and higher in ■ Devices with a large number of mating cycles to
proprietary solutions avoid connector damage, e.g. smart watches,
■ High permeability ferrite shielding focuses magnetic fitness tracker
flux and protects sensitive electronics ■ Consumer products, e.g. digital cameras, baby
■ High reliability construction phones, remote control, smartphone sleeves,
watertight products
■ Explosion sensitive area where the use of a physical
connection is hazardous
■ Smart sensors
www.we-online.com/we-wpcc
Transmitter – Low Profile

Technical Data:
L RDC max. IR DC fres P
Order Code Q Size Compliance
(µH) (mΩ) (A) (MHz) (W)
760308101411 6.3 48 7.5 110 20 150 Ø 50 x 2.8 mm
works with Qi Tx
760308101410 24 100 5.5 170 6 100 Ø 50 x 3.1 mm
IC’s
760308101310 24 110 7.5 155 7.7 100 Ø 75 x 3.3 mm
L: Inductance; RDC max.: DC Resistance max.; IR DC: Rated Current DC; Q: Q-Factor; fres: Self Resonant Frequency; P: Power Capability
Transmitter – Combination WPT and NFC coils

Technical Data:
L1 L2 RDC1 max. RDC2 max. IR DC1 IR DC2 fres 1 fres 2 P
Order Code Qmin. Qtyp. Size Compliance
(µH) (µH) (mΩ) (mΩ) (A) (A) (MHz) (MHz) (W)
Qi – Airfuel
Ø 65 x
760308101150 6.3 1.2 48 55 7.5 7 100 80 27 48 Alliance
3.5 mm
– NFC
100
Qi – Airfuel
Ø 54 x 4
760308101312 24 0.7 90 30 6 13 125 30 7 63 Alliance
mm
– NFC
L1: Inductance; L2: Inductance [2]; RDC1 max.: DC Resistance; RDC2 max.: DC Resistance [2]; IR DC1: Rated Current DC [1]; IR DC2: Rated Current DC [2]; Qmin.: Q-Factor [1]; Qtyp.:
Q-Factor [2]; fres 1: Self Resonant Frequency [1]; fres 2: Self Resonant Frequency [2]; P: Power Capability
Transmitter – High Power

Technical Data:
L RDC max. fres P
Order Code Q Size Compliance
(µH) (mΩ) (MHz) (W)
works with Qi Tx
760308101311 5.8 14 220 13 400 Ø 70 x 8.5 mm
IC’s
L: Inductance; RDC max.: DC Resistance max.; Q: Q-Factor; fres: Self Resonant Frequency; P: Power Capability

WE-ACHC
SMT High Current Air Coil
■ No saturation ■ High current DC/DC converters with frequencies
■ No core losses > 4 MHz
■ Extremly high Q factor ■ RF power amplifiers
■ Ultra low RDC ■ RF voltage regulators
■ High current capability ■ High current RF filters / chokes
■ Inductances from 22 nH up to 146 nH ■ Power supplies
■ Operating temperature: -40 °C up to +125 °C ■ Magnetically sensitive applications
Power Magnetics
No core losses and no saturation www.we-online.com/we-achc
Size 1010
Technical Data:
L Test Condition Test Condition RDC max. IR fres
Order Code Tol. L Qmin.
(nH) L Q (mΩ) (A) (MHz)
7449150023 23 191 1.2 30 867
7449150046 46.5 223 1.62 28 581
7449150079 79 ±20 % 1 MHz 184 100 MHz 2.11 23 422
7449150111 111 186 2.11 22 374
7449150146 146 163 3.33 19 332
L: Inductance; Tol. L: Inductance (Tol.); Test Condition L: Inductance (Test cond.); Qmin.: Q-Factor; Test Condition Q: Q-Factor (Test cond.); RDC max.: DC Resistance max.;
IR: Rated Current; fres: Self Resonant Frequency
Size 1212
Technical Data:
(nH) L Q (mΩ) (A) (MHz)
7449152022 22 280 0.55 40 867
7449152042 42 240 0.77 34 605
7449152066 66 ±20 % 1 MHz 245 100 MHz 0.99 32 457
7449152090 90 226 1.21 30 359
7449152111 117 211 1.43 32 345

Design Kits

Single Coil Power Inductor
WE-GF; SMT Wire Wound Inductors 744766
WE-HCC; SMT High Current Cube Inductors 744332
WE-HCI 1030, 1040, 1050; SMT Flat Wire High Current Inductors 744355
WE-HCI 1335, 1350, 1365; SMT Flat Wire High Current Inductors 744356
WE-HCI 1890; SMT Flat Wire High Current Inductors 744357
WE-HCI 5040, 7030, 7040, 7050; SMT Flat Wire High Current Inductors 744354
WE-PMCI 0603, 0805, 0806,1008; Power Molded Chip Inductor 742792
WE-HCM; SMT High Current Flat Wire Inductors 744300
WE-LHMI 1040, 1335, 1365; SMT Low Profile High Current Molded Inductors 7443736
WE-LHMI 4012, 4020; SMT Low Profile High Current Molded Inductors 7443732
WE-LQ 1210, 1812; SMT Inductors 744032
WE-LQFS 3818, 4818, 4828; SMT Shielded Power Inductors 7440601
WE-LQS 2010, 2512, 3015; SMT Semi-Shielded Power Inductors 7440402
WE-LQS 3012, 4025; SMT Semi-Shielded Power Inductors – Low Loss 7440403A
WE-LQS 4012, 4018, 5020, 5040; SMT Semi-Shielded Power Inductors 7440405
WE-LQS 6028, 6045, 8040; SMT Semi-Shielded Power Inductors 7440408
WE-LQSH 2010, 2512, 3012, 4020; SMT Semi-Shielded High Saturation Power Inductors 7440502
WE-MAPI 1610, 2010; Metal Alloy Power Inductors 7443831
WE-MAPI 2506, 2508, 2510, 2512; Metal Alloy Power Inducturs 7443832
WE-MAPI 3010, 3012, 3015, 3020; Metal Alloy Power Inductors 7443833
WE-MAPI 4020, 4030; Metal Alloy Power Inductors 7443834
WE-PD 1030, 1050; SMT Shielded Power Inductors 7447713
WE-PD2 4532, 5820, 5848; SMT Power Inductors 744773

Power Magnetics
WE-PD2 7850, 1054; SMT Power Inductors 744775
WE-PMI; Power Multilayer Inductors 744797
WE-PD HV; SMT Power Inductors 768771
WE-SPC; SMT Shielded Power Inductors 7440894
WE-TI 5075, 6065, 8055, 8075, 8095; Radial Leaded Wire Wound Inductors 744741
WE-TI 8012, 1014; Radial Leaded Wire Wound Inductors 744743
WE-TIS; Shielded Radial Leaded Wire Wound Inductors 744731
WE-TPC 2811, 2813, 2828, 3816, 4818; SMT Shielded Tiny Power Inductors 744028
WE-TPC 4828, 5818, 5828; SMT Shielded Tiny Power Inductors 744043
WE-XHMI 1090, 1510; SMT Xtreme High Current 7443936
WE-XHMI 6030, 6060, 8080; SMT Xtreme High Current 7443934
PFC Chokes
WE-PFC; Power Factor Correction Chokes 760801
Dual Coil Power Inductors
Energy Harvesting Design Kit IC-744885
Energy Harvestin Demo Kit Gleanergy IC-744888
WE-DD; SMT Shielded Coupled Inductors 744870
WE-TDC; SMT Coupled Inductors 744894
Wireless Power Transmission
200 W Development Kit Wireless Power Transfer Extend Medium Power Solution 760308EMP
15 W Design Kit Wireless Power Medium Solution including data transfer 760308MP2
LCD Board for the 200W Development Kit 760308EMP LCD
Flexible Transformers for SMPS
WE-FLEX; Flexible Transformers 749196
Transfomers for DC/DC-Converters
WE-PoE; Transformer for Power-over-Ethernet 749119

1 PASSIVE COMPONENTS  Power Magnetics  Focus Product
Focus Product
High Power
in Small Size:
WE-AGDT
Compact Transformers for Gate Driver Auxiliary Simplified Flyback Application with Bipolar Output
Power Supply up to 6 W
WE-AGDT
WE-AGDT is a small sized power transformer with very low inter-

VIN +15 V
winding capacitance and high isolation, optimized for high speed
SiC MOSFET and IGBT applications.
GNDISO
Interwinding capacitance down to 6.8 pF
High efficiency and very compact
Common control voltages for SiC MOSFETs -4 V
Wide range input voltages from 9 V to 36 V

Dielectric insulation up to 4 kV GND
Reference designs with Analog Devices and Texas Instruments
Application Example: Three Phase SiC Motor Inverter
Isolation Barrier
Low Voltage High Voltage
Side Side D D D
Isolated Gate Driver IC +Vdd
SiC G G G
MOSFET D
Signal Isolation
Ron
Logic/Drive
G S‘ S S‘ S S‘ S
PWM Roff Kelvin Point
S‘
AC Motor
S
Load
D D D
-Vee
Isolated Auxiliary Supply G G G
+Vdd
RTN S‘ S S‘ S S‘ S
-Vee

Wide range input voltages
from 9 V to 36 V
Dielectric insulation up to 4 kV
Power Magnetics
Optimized for high
speed SiC MOSFETs
Very low interwinding

capacitance
Surface mount EP7
Drive hard. Drive safe. Drive hard. Drive safe.

WE-AGDT Gate Drive Transformer
Product video and more:
www.we-online.com/agdt
Learn more about WE-AGDT:

www.we-online.com/we-agdt

1 PASSIVE COMPONENTS  Power Magnetics  Basic Knowledge
Single Coil Inductors
Ferrite Iron Round Wire:

NiZn: Robust WE-PD, WE-PD2, Powder: Power density WE-LHMI Up to 4 wires in parallel for ultra low
WE-LQS, WE-TI Alloy: Efficient WE-MAPI, losses, e.g. WE-PD, WE-TPC, WE-MAPI,
MnZn: Performance WE-PD, WE-XHMI, WE-HCI and WE-PMCI WE-LHMI
WE-HCF, WE-TPC
Flat Wire:
Wire types Best filling grade for highest power
density possible, e.g. WE-HCI, WE-XHMI
Core material and extremly low RDC e.g. WE-HCM
Litz Wire:
Up to 115 wires twisted for highest
ripple current application, e.g. WE-HCF
Shielding types
Suitable for
Unshielded Semi shielded all kind of
(cost efficient) (allrounder) applications
Shielded (best Molded SMT THT

performance) (highest power) Surface Mount Through Hole
AEC-Q200 qualified ighest power density based in

H S ize from 1.6 mm up to 41 mm
(certain series) package volume Current rating up to > 125 A
Temperature range: Robust design for advanced applications Inductance value from
-40 °C up to +125 °C / +150 °C / +155 °C Best filter characteristics 25 nH up to 22 mH
Outstanding saturation behavior Operating voltage rating Switching frequency from
Extreme low RDC up to 400 V 10 kHz up to 10 MHz
Usage of Single Coil Inductors:

Often used in DC/DC converter, e.g. buck converter
One of the most important factors of an inductor is its
current capability
Compare in REDEXPERT:
www.we-online.com/re-ferrite-iron

1 PASSIVE COMPONENTS  Power Magnetics  Additional Information
Power Magnetics for

SiC-MOSFET Gate Drivers
Gate Driver System for SiC-MOSFET Isolation Barrier
The gate drive IC
Low Voltage High Voltage controller and the
Isolated Gate Driver systems control the turn-on Side Side
Isolated Gate Driver IC +Vdd auxiliary power supply
and turn-off of power semiconductor devices (like SiC
MOSFET D with bipolar output are
SiC-MOSFET) in switching applications.
Signal Isolation
Ron configured and
Logic/Drive
G
PWM Roff Kelvin Point connected to the
S‘
Power Magnetics
They provide: S SiC-MOSFET as shown
Safety and operating galvanic isolation
-Vee
in the image
Optimal gate-source drive voltage levels
Isolated Auxiliary Supply
+Vdd
Fast drive current
Power required for the switching events RTN
-Vee
Fast switching
times
The new WE-AGDT auxiliary gate drive
High transformer for SiC-MOSFET:
Smaller solution and
efficiency lower system costs www.we-online.com/we-agdt
SiC-MOSFETs for State-of-the-art, Present and Future Power Electronics Applications
Principal Characteristics Advantages of SiC-MOSFETs Challenges for driving SiC-MOSFETs

of SiC-MOSFETs in Power Converters Very fast current sourcing
Extremely high switching speed Higher efficiency Rugged galvanic isolation
Very high breakdown voltage Higher output power Spurious turn-on (e.g. Miller effect)
Very low conduction resistance Higher operating voltage Gate voltage ringing and EMI
High temperature rating Smaller solution size Control signal distortion and CMTI
Robust and reliable operation Lower system cost
SiC-MOSFETs are Made to Switch Fast !

In order to turn on and off a SiC-MOSFET, it is required to charge and discharge its parasitic gate capacitance.
A very low parasitic inductance of the gate current loop, especially at the source terminal of the device, helps to achieve a very fast and
well-controlled switching transition with low EMI ringing. Below the equivalent gate current loops during the switching transitions.
+Vdd SiC device turn-on +Vdd SiC device turn-off

Vgate
ON Lp,on Ron OFF
Cout G G Ig(on) Ig(off)

(V+) Lp,off Roff
OFF ON
-Vee Cg -Vee Cg
Cout
Ig(on) Ig(off) Fast and high-peak gate drive current for fast
RTN S RTN (V-) S
switch on and switch-off of the SiC device
(*) see Reference Design Document RD001 for more information

Power Magnetics for

SiC-MOSFET Gate Drivers
Isolation Barrier Parasitic Capacitance:
Common-mode Transient Immunity (CMTI)
and EMI Performance
Common-mode Transient Immunity (CMTI) (measured in kV/us or V/ns),
is an indication of the maximum dV/dt which can be tolerated across
the isolation barrier before malfunction of the gate driver system
occurs, due to excessive distortion of the gate drive control signals.
SiC-MOSFETs switch extremely fast, helping to increase efficiency
and reduce system size and cost.
Fast switching speed causes high dV/dt to appear across the
isolation barrier parasitic capacitance (Gate driver IC and auxiliary Isolation
Barrier
supply transformer).
CM Filter *Cpt Ciso-xfmr D
Cgd
Common-mode displacement currents are generated.
LCM dv
A lower parasitic capacitance reduces these displacement G High
dt
To/From EMI
currents, helping to achieve a higher CMTI rating and better EMI Measurement Cy
Cgs
S
Equipment ICM2
performance. Ciso-drv Ciso
It is critical to minimize the transformer interwinding ICM1
Earth/Chassis
capacitance in fast-switching SiC-MOSFET gate drive
applications. Example EMI common-mode current concept schematic
Würth Elektronik WE-750318131
Reference Design RD001

PRI SEC
VIN +15 V
6W Isolated auxiliary supply for SiC-MOSFET
and IGBT Gate Driver systems. RTN
E xtremely compact solution VIN SW -4 V

OVLO RFB
Wide input voltage PSR flyback converter INTVCC RREF
Bipolar output voltage: +15 V / -4 V GND TC
Output power up to 6 W LT8302 Simplified Schematic from RD001

Efficiency over 86 %
Easy to integrate into the Gate Driver system
Positive Rail Load Regulation (@ Vin) Negative Rail Load Regulation (@ Vin)
PCB layout and fabrication files available 15.00 V -3.7 V
14.95 V
Rail Voltage
Rail Voltage
-3.8 V
14.90 V
-3.9 V
14.85 V
14.80 V -4.0 V
0W 1W 2W 3W 4W 5W 6W 0W 1W 2W 3W 4W 5W 6W
Output Power Output Power
9V 12 V 15 V 18 V 9V 12 V 15 V 18 V
14 mm 27 mm
Our reference design 6W Isolated auxiliary
power supply for SiC-MOSFET gate driver:
Two compact board design variants are provided: www.we-online.com/RD001
One single-sided and one double-sided.

Class-D Digital Audio Inductors
What are Class-D Digital Audio Inductors?

The WE-HIDA and WE-LHMD are designed to be used in high
quality Class-D audio applications. The parts have been tested and
optimized in real applications to reduce total harmonic distortion
and noise (THD+N) and idle mode losses significantly.
Power Magnetics
S pecial selected core materials for best
THD+N performance
Low RDC for decreased idle mode losses
2-in-1 designs for low profile in full bridge circuitries
Our webinar on Class-D inductors:
www.we-online.com/class-d
Full bridge circuit Design-In Steps

Less components needed
Bus-pumping issue 1st Step
LC-Filter Define LC-Filter requirements:
Cut-off frequency, inductance value,
switching frequency, speaker impedance.
Audio Source Amplifier
2nd Step
Check current capability:
RMS and peak currents.
Half bridge circuit

Double voltage swing
3rd Step
Lower gain increase before cut-off frequency
Select single or dual inductor type
with correct current capability.
LC-Filter Low pass filter
Cut-off frequency between
20 – 60 kHz
Audio
Source
Amplifier Mostly second order filters 4th Step
Optimizes EMI behavior of Optimize PCB layout for EMI
higher order harmonics reduction with filter components.
Our audio inductors are available in THT (WE-HIDA) and SMT

(WE-LHMD) to provide the right mounting style for your application. Learn more about audio inductors:
www.we-online.com/digital-audio
Sizes SMT (WE-LHMD): 1008, 1213
Sizes THT (WE-HIDA): 1415, 1480, 1521, 1715, 3119

Select Power Magnetics in REDEXPERT
Get Suggestions for Optimal L Value Lopt,

Irms and Imax for the Needed Inductor!
Select by electrical and mechanical parameters
Compare products easily
Find detailed inductance values at DC bias
Simulate losses in the application for any DC/DC converter
Sort losses in the product table to find the “coolest” parts
Try it out:
www.we-online.com/redexpert-power-inductors

Signal & Communications
Communications
Signal &
Product Overview 78
Products 82
Design Kits 91
77
1 PASSIVE COMPONENTS  Signal & Communications
Product Overview

WE-ASI
AS-Interface Inductor LAN Transformers Filter Solutions

WE-ASI WE-LAN WE-EPLE
L: 3.0 ~ 18.0 mH Speed: 10/100/1000 Mbit/s USB-A connector with integrated
IR: 0.08 ~ 0.24 A Ports: 1~4 circuit protection device and EMI noise
RDC: 10.0 ~ 72.0 Ω Temp. Range: -40 to +125 °C reduction
PoE: 350 ~2000 mA
WE-LAN 10G
Speed: 10 Gbit/s
Ports: 1
Temp. Range: -40 to +105 °C
PoE: 350 ~ 1500 mA
Extended WE-LAN AQ
Speed: 10/100/1000 Mbit/s
Ports: 1
Extended WE-RJ45 LAN
Ports: 1~4
PoE: 350 mA ~ 720 mA
Extended WE-RJ45 LAN 10G
Speed: 10 Gbit/s
Ports: 1
PoE: 350 mA ~ 1000 mA
Extended WE-STST
PoE: 350 ~ 600 mA

RF Inductors Signal Filters Balun
Extended WE-KI WE-LPF WE-BAL
L (±2 % or ±5 %): 1 ~ 1800 nH Low-Pass Filter Balun
Q: 15 ~ 60 Frequency Range: 902 ~ 5875 MHz Frequency Range: 2400 ~ 5875 MHz
SRF: 188 ~ 12500 MHz Sizes: 0603, 0805 Sizes: 0603, 0805
IR: 100 ~ 1360 mA
Sizes: 0402, 0603, 0805, 1008 WE-BPF
Band-Pass Filter
WE-KI HC Frequency Range: 2400 ~ 5920 MHz
L (±2 %): 1 ~ 390 nH Sizes: 0805, 1008
Q: 18 ~ 46
SRF: 880 ~ 16000 MHz
Antennas
IR: 170 ~ 2300 mA
Extended WE-MCA
Sizes: 0402, 0603
Multilayer Chip Antenna
WE-RFI Frequency Range: 423 ~ 5875 MHz
Communications
L (±5 %): 0.47 ~ 47 µH
Q: 15 ~ 45
Signal &
SRF: 17 ~ 375 MHz
IR: 45 ~ 500 mA
Sizes: 0805, 1008
WE-RFH
L (±5 %): 0.56 ~ 10 µH
Q: 15 ~ 45
SRF: 40 ~ 415 MHz
IR: 300 ~ 760 mA
Sizes: 1008
WE-TCI
L (±0.1 nH or 2 %): 1 ~ 22 nH
Q: 8 ~ 13
SRF: 2800 ~ 9000 MHz
IR: 90 ~ 700 mA
Sizes: 0201, 0402
Extended WE-MK
L (±5 %): 1 ~ 470 nH
Q: 8 ~ 20
SRF: 250 ~ 17000 MHz
IR: 100 ~ 600 mA
Sizes: 0201, 0402, 0603
WE-CAIR All Signal & Communications Components

L (±5 %): 1.65 ~ 548 nH
Q: 100 ~ 140
at a glance:
SRF: 1.1 ~ 12.5 GHz www.we-online.com/signal-com
IR: 1.5 ~ 4 A
Sizes: 1322, 1340, 3136, 3168,
4248, 5910
WE-AC HC Explore our application notes for Signal &

L (±20 %): 22 ~ 146 nH
Qtyp: 163 ~ 280
Communications:
SRFtyp: 332 ~ 867 MHz www.we-online.com/appnotes
IR: 19 ~ 40 A
Sizes: 1010, 1212

Modelithics

RF Product Finder
Frequency (GHz) 0 1 2 3 4 5 6
Chip Antenna 868-960 MHz 1550-1600 MHz 2400-2500 MHz 5000-6000 MHz
WE-MCA 11 x 5 mm 5.2 x 3.7 mm 5.2 x 3.7 mm 5.2 x 3.7 mm
902-928 MHz
5.2 x 3.7 mm
1570-1580 MHz 2400-2500 MHz
3.2 x 1.7 mm 9.5 x 2 mm
8 x 4 mm
3 x 2 mm
7 x 2 mm
ANTENNAS, FILTERS & BALUNS
5.2 x 3.7 mm
3.2 x 1.7 mm
2400-2500 MHz 4900-5875 MHz

8.5 x2 mm 8.5 x 2 mm
Balun 2400-2500 MHz 5150-5875 MHz

WE-BAL 0603 0805
0805
Low-Pass-Filter 902-928 MHz 2400-2500 MHz 5150-5875 MHz

WE-LPF 0805 0603 0805
0805
Band-Pass-Filter 2400-2500 MHz

WE-BPF 0805 5150-5875 MHz
1008
0805
Frequency ranges: ISM 433/868 MHz GPS 1559/1610 MHz WLAN 2400/2483 MHz WiMAX 3410/3594 MHz WLAN 5150/5250 MHz
ZigBEE EU 868 MHz 4G 1710/2690 MHz ZigBee 2402/2480 MHz 5250/5350 MHz
ZigBEE USA 915 MHz Bluetooth 2402/2480 MHz 5470/5725 MHz
Mobil-DB 878/880 MHz HomeRF 2402/2480 MHz 5725/5825 MHz
GSM 890/914 MHz 4G 1710/2690 MHz DECT2 5725/5825 MHz
935/959 MHz
4G 700/960 MHz

Q Value 0 10 20 30 40 50 60
WE-KI 1-120 nH
1-1000 nH
22-1800 nH
3.3-1000 nH
RF CHIP INDUCTORS
WE-KI HC 1-51 nH
1.8-390 nH
WE-RFI 470-10000 nH
1200-47000 nH
WE-RFH 470-10000 nH
WE-MK 1-27 nH
1-270 nH
1-470 nH
WE-TCI 1-22 nH
Communications
1 - 5.6 nH
Signal &
Need a higher Q factor?
Q Value 60 100 140 180 220 260 ∞
WE-CAIR 1.65-5.45 nH
5.6-12.55 nH
AIR COILS
2.5-18.5 nH
17.5-43 nH
22.0-120 nH
90.0-538 nH
WE-AC HC 23-146 nH
22-117 nH
0201 3136 5910

0402 1322 1010
0603 1340 1212
0805 3168
1008 4248
RF Product Portfolio:
www.we-online.com/signal-and-communications

1 PASSIVE COMPONENTS  Signal & Communications  Products
WE-STST
Super Tiny Signal Transformer
■ Super small size ■ Ethernet 10/100/1000 Base-T
■ 1.5 kV isolation voltage ■ Ethernet 2.5/5G and 10G Base-T
■ 350 µH OCL as per IEEE 802.3 ■ Single Pair Ethernet (SPE)
■ Power over Ethernet up to 30 W ■ Industrial sensors
■ Operating temperature: -40 °C up to +105 °C ■ g.fast
Now for PoE and PoE+ applications www.we-online.com/we-stst
Size 4532
Technical Data:
L L W H
Order Code Data rate Application PoE VT
(µH) (mm) (mm) (mm)
10/100/1000 Base-T, Ethernet, Single
74930000 – 350 1500 VRMS
10/100 Base-T1 Pair Ethernet
10G Base-T, Ethernet, Single
74930100 – 120 1500 VRMS
1000 Base-T1 Pair Ethernet
74930030 10/100/1GBase-T Ethernet, PoE PoE (up to 350 mA) 350 1500 VRMS
74930130 10/100/1G/10GBase-T Ethernet, PoE PoE (up to 350 mA) 110 1500 VRMS
74930120 10/100/1G/10GBase-T Ethernet, PoE+ PoE+ (up to 600 mA) 110 1500 VRMS 4.7 3.22 2.9
Short distance
749302010 – sensing at high – 300 400 VAC
frequency
Long distance
749302011 – sensing at low – 2000 400 VAC
frequency
L: Inductance; VT: Insulation Test Voltage; L: Length; W: Width; H: Height

WE-LAN AQ
L AN Transformer Automated Quality
■ Extremely consistent electrical values with highest ■ Suitable for PoE and PoE+ applications
signal integrity ■ Compatible to industrial Ethernet systems like
■ 100 % automatic production EtherCAT or Profinet
■ Ethernet with speeds up to 1 Gbit/s ■ Compliant with most IC's for Ethernet applications
■ Improved solderability and AOI inspection due to such as Analog Devices, Texas Instruments,
half-vias with gold plating Broadcom
■ Improved return loss and crosstalk properties ■ Hubs, routers, switches, IP cameras, IoT
■ Compatible with existing LAN products applications
Now for PoE and PoE+ applications www.we-online.com/we-lan-aq
Communications
10/100 Base-T SMT Transformer
Signal &
Technical Data:
L VT L W H
Order Code Data rate PoE
(µH) (V (RMS)) (mm) (mm) (mm)
749013310 10/100 Base-T PoE (up to 350 mA) 180 12.7 8.67 4.25
749012310 10/100 Base-T PoE+ (up to 720 mA) 150 12.7 8.67 4.25
1500
749023310 1000 Base-T PoE (up to 350 mA) 180 16.5 10.3 4.35
749022310 1000 Base-T PoE+ (up to 720 mA) 150 16.5 10.3 4.35
L: Inductance; VT: Insulation Test Voltage; L: Length; W: Width; H: Height

WE-LAN RJ45
L AN Transformer
■ RJ45 connector with integrated transformer / ■ Compatible to industrial Ethernet systems like
common mode choke EtherCat or Profinet
■ Power over Ethernet up to 50 Watt and speeds up ■ Compliant with most IC’s for Ethernet applications
to 1 Gbit such as Analog Devices, Texas Instruments,
■ Compliant with standards: IEEE 802.3u, IEEE Broadcom
802.3ab, IEEE 802.3af and IEEE 802.3at ■ Hubs, routers, switches, IP cameras, IoT
■ Operating temperature: -40 °C up to +85 °C applications
www.we-online.com/we-lan-rj45
LAN RJ45
Technical Data:
Number Shield L W H
Order Code Data rate PoE Tab LED
of Ports Tabs (mm) (mm) (mm)
7499410440 1 10/100 Base-T PoE+ (up to 720 mA) Down No yellow/green-yellow/green 21.35 15.9 13.65
7499411440 1 10/100 Base-T PoE+ (up to 720 mA) Down Yes yellow/green-yellow/green 21.35 15.9 13.65
7499011448 1 10/100 Base-T non-PoE Vertical Yes yellow/green-yellow/green 16.8 16 16.9
PoE (up to 350 mA
7499311614 1 1000 Base-T Up Yes green/orange-green 33.02 17 13.87
each center Tap)
PoE+ (up to 1000 mA
7499511420 1 1000 Base-T Up Yes green/yellow-green 33.02 17 13.87
per center Tap)
7499111615 1 1000 Base-T non-PoE Up Yes green/orange-yellow 24.6 17.78 11.3
7499510440 1 1000 Base-T PoE (up to 600 mA) Down No yellow/green-yellow/green 21.35 15.9 13.65
7499511441 1 1000 Base-T PoE (up to 600 mA) Down Yes yellow/green-yellow/green 21.35 15.9 13.65
74991104402 1 1000 Base-T non-PoE Vertical No yellow/green-yellow/green 16.9 16 16.9
74991114410 1 1000 Base-T non-PoE Vertical Yes yellow/green-yellow/green 16.9 16 16.8
74990214400 1 x 2 10/100 Base-T non-PoE Up Yes yellow/green-yellow/green 21.5 31 13.4
Tab: Tab Position; LED: LED (Left-Right); L: Length; W: Width; H: Height

WE-LAN RJ45 10G
1 0 Gbit LAN Transformer
■ Highspeed data transfer with 10 Gbit/s ■ Compliant with Valens Ethernet ICs
■ Compliant with standards: IEEE 802.3af, IEEE.3at, ■ Highspeed communications and servers
IEEE 802.3bt ■ Suitable for HDBaseT applications
■ Power over Ethernet up to 100 Watts
www.we-online.com/we-lan-rj45-10g
Communications
RJ45 LAN 10G
Signal &
Technical Data:
L W H
Order Code Data rate PoE Tab Shield Tabs
(mm) (mm) (mm)
7499811120 PoE+ (up to 1000 mA) 28.57 17.53 11.92
7499611422 non-PoE 23.88 17.53 11.3
10G Base-T Down Yes
7499611424 non-PoE 26.06 17.58 11.3
7499611423 non-PoE 28.57 17.53 11.92
Tab: Tab Position; L: Length; W: Width; H: Height

WE-MK
SMT Multilayer Ceramic Inductor
■ Coil integrated in a multilayer ceramic structure ■ High frequency circuits
■ All inductors with polarity marking ■ Bluetooth
■ Extremely high self resonant frequency ■ Wireless LAN
■ Inductance tolerances of ±2 % (or ±0.1 nH) and ■ Filter circuits
±5 % (or ±0.3 nH) ■ Oscillators
■ Inductance very stable over the temperature range ■ Pagers
■ Recommended soldering: Reflow ■ Laptops
■ Operating temperature: -55 °C up to +125 °C ■ PCMCIA-cards
www.we-online.com/we-mk
New! All articles also with ±2 %
(or ±0.1 nH) of inductance tolerance
Size 0201
Technical Data:
(nH) L Q (Ω) (mA) (MHz)
7447820010G 1 ±0.1 nH 0.11 470 10000
7447820012G 1.2 ±0.1 nH 0.12 450 10000
7447820015G 1.5 ±0.1 nH 0.13 430 10000
7447820018G 1.8 ±0.1 nH 0.16 390 10000
7447820020G 2 ±0. 1nH 0.17 380 8800
7447820022G 2.2 ±0.1 nH 0.19 360 8800
7447820024G 2.4 ±0. 1nH 0.2 350 8300
7447820027G 2.7 ±0.1 nH 0.21 340 7700
7447820030G 3 ±0.1 nH 0.22 330 7200
7447820033G 3.3 ±0.1 nH 0.23 320 6700
7447820036G 3.6 ±0.1 nH 0.25 310 6400
7447820039G 3.9 ±0.1 nH 0.27 300 6000
7447820043G 4.3 ±0.1 nH 0.3 280 5700
7447820047G 4.7 ±0.1 nH 0.3 280 5300
100 MHz 4 100 MHz
7447820051G 5.1 ±0.1 nH 0.33 270 5000
7447820056G 5.6 ±0.1 nH 0.36 260 4600
7447820062G 6.2 ±2 % 0.38 250 4200
7447820068G 6.8 ±2 % 0.39 250 3900
7447820075G 7.5 ±2 % 0.41 240 3600
7447820082G 8.2 ±2 % 0.45 230 3400
7447820091G 9.1 ±2 % 0.48 220 3200
7447820110G 10 ±2 % 0.51 220 2900
7447820112G 12 ±2 % 0.68 190 2700
7447820115G 15 ±2 % 0.71 180 2300
7447820118G 18 ±2 % 0.81 170 2100
7447820122G 22 ±2 % 1 150 1800
7447820127G 27 ±2 % 1.35 120 1800
7447820133G 33 ±2 % 1.5 110 1700
L: Inductance; Tol. L: Inductance Tolerance; Qmin.: Q-Factor; RDC max.: DC Resistance max.; IR: Rated Current; fres: Self Resonant Frequency

Size 0402
Technical Data:
7447840010G 1 ±0.1 nH 0.1 300 8000
7447840012G 1.2 ±0.1 nH 0.1 300 8000
7447840015G 1.5 ±0.1 nH 0.1 300 8000
7447840018G 1.8 ±0.1 nH 0.1 300 6000
7447840020G 2 ±0.1 nH 0.12 300 6000
7447840022G 2.2 ±0.1 nH 0.15 300 6000
7447840027G 2.7 ±0.1 nH 0.17 300 6000
7447840030G 3 ±0.1 nH 0.18 300 6000
7447840033G 3.3 ±0.1 nH 0.19 300 6000
7447840039G 3.9 ±0.1 nH 0.19 300 6000
7447840047G 4.7 ±0.1 nH 0.23 300 6000
Communications
7447840056G 5.6 ±0.1 nH 0.26 300 5300
Signal &
7447840068G 6.8 ±2 % 0.29 300 4200
7447840075G 7.5 ±2 % 0.31 300 4200
7447840082G 8.2 ±2 % 0.33 300 3600
7447840110G 10 ±2 % 0.35 300 3200
7447840112G 12 ±2 % 100 MHz 8 100 MHz 0.41 300 2800
7447840115G 15 ±2 % 0.46 300 2300
7447840118G 18 ±2 % 0.51 300 2100
7447840122G 22 ±2 % 0.58 300 1800
7447840127G 27 ±2 % 0.67 300 1600
7447840133G 33 ±2 % 0.67 200 1500
7447840139G 39 ±2 % 1.06 200 1200
7447840147G 47 ±2 % 1.15 200 1000
7447840156G 56 ±2 % 1.2 200 800
7447840168G 68 ±2 % 1.25 180 800
7447840182G 82 ±2 % 1.6 150 600
7447840210G 100 ±2 % 1.6 150 600
7447840212G 120 ±2 % 1.6 150 600
7447840215G 150 ±2 % 2.99 140 500
7447840218G 180 ±2 % 3.38 150 500
7447840222G 220 ±2 % 3.77 120 500
7447840227G 270 ±2 % 4.9 110 500

WE-MK
SMT Multilayer Ceramic Inductor
Size 0603
Technical Data:
7447860010G 1 ±0.1 nH 100 MHz 8 100 MHz 0.05 300 10000
7447860012G 1.2 ±0.1 nH 100 MHz 8 100 MHz 0.05 300 10000
7447860015G 1.5 ±0.1 nH 100 MHz 8 100 MHz 0.1 300 6000
7447860018G 1.8 ±0.1 nH 100 MHz 8 100 MHz 0.1 300 6000
7447860022G 2.2 ±0.1 nH 100 MHz 8 100 MHz 0.1 300 6000
7447860027G 2.7 ±0.1 nH 100 MHz 10 100 MHz 0.1 300 6000
7447860033G 3.3 ±0.1 nH 100 MHz 10 100 MHz 0.12 300 6000
7447860039G 3.9 ±0.1 nH 100 MHz 10 100 MHz 0.14 300 6000
7447860047G 4.7 ±0.1 nH 100 MHz 10 100 MHz 0.16 300 4000
7447860056G 5.6 ±0.1 nH 100 MHz 10 100 MHz 0.18 300 4000
7447860068G 6.8 ±2 % 100 MHz 10 100 MHz 0.22 300 4000
7447860082G 8.2 ±2 % 100 MHz 10 100 MHz 0.24 300 3500
7447860110G 10 ±2 % 100 MHz 12 100 MHz 0.26 300 3400
7447860112G 12 ±2 % 100 MHz 12 100 MHz 0.28 300 2600
7447860115G 15 ±2 % 100 MHz 12 100 MHz 0.32 300 2300
7447860118G 18 ±2 % 100 MHz 12 100 MHz 0.35 300 2000
7447860122G 22 ±2 % 100 MHz 12 100 MHz 0.4 300 1600
7447860127G 27 ±2 % 100 MHz 12 100 MHz 0.45 300 1400
7447860133G 33 ±2 % 100 MHz 12 100 MHz 0.55 300 1200
7447860139G 39 ±2 % 100 MHz 12 100 MHz 0.6 300 1100
7447860147G 47 ±2 % 100 MHz 12 100 MHz 0.7 300 900
7447860156G 56 ±2 % 100 MHz 12 100 MHz 0.75 300 900
7447860168G 68 ±2 % 100 MHz 12 100 MHz 0.85 300 700
7447860182G 82 ±2 % 100 MHz 12 100 MHz 0.95 300 600
7447860210G 100 ±2 % 100 MHz 12 100 MHz 1 300 600
7447860212G 120 ±2 % 50 MHz 8 50 MHz 1.2 300 500
7447860215G 150 ±2 % 50 MHz 8 50 MHz 1.2 300 500
7447860218G 180 ±2 % 50 MHz 8 50 MHz 1.3 300 400
7447860222G 220 ±2 % 50 MHz 8 50 MHz 1.5 300 400
7447860227G 270 ±2 % 50 MHz 8 50 MHz 1.9 300 400
7447860233G 330 ±2 % 50 MHz 8 50 MHz 2.1 300 350
7447860239G 390 ±2 % 50 MHz 8 50 MHz 2.3 150 350
7447860243G 430 ±2 % 50 MHz 8 50 MHz 2.4 150 300
7447860247G 470 ±2 % 50 MHz 8 50 MHz 2.6 150 300

WE-KI
SMT Wire Wound Ceramic Inductor
■ Inductance tolerances: ±0.2 nH, ±2 % and ±5 % ■ VCO, RF module & other wireless products
■ High Q and small RDC ■ Wireless LAN
■ Self resonant frequency up to 12.5 GHz ■ Bluetooth
■ Best price performance ratio ■ Computer peripherals e.g. mouse, keyboard,
■ High thermal stability earphone
■ Recommended solder profile: Reflow ■ Cellular phone (CDMA/GSM/PHS)
■ Operating temperature: -40 °C up to +125 °C ■ Cordless phone (DECT/CT1/CT2)
■ Custom designs on request ■ Remote control
■ Set Top Box & CATV
■ Cable modem
■ RF transceivers
■ SAT & GPS receiver
New! Higher inductance
values up to 1800 nH
Communications
Size 0603
Signal &
Technical Data:
744761247A 470 2.1 170 250
744761256A 560 2.5 120 220
744761268A 680 ±5 % 25 MHz 15 25 MHz 2.9 120 200
744761282A 820 3.2 120 200
744761310A 1000 3.5 120 200
Size 0805
Technical Data:
7447602470A 470 25 100 MHz 1.05 210 350
7447602560A 560 18 100 MHz 1.1 230 250
7447602620A 620 18 100 MHz 1.2 230 250
7447602680A 680 15 100 MHz 1.2 400 188
7447602820A 820 ±5 % 25 MHz 15 100 MHz 1.5 300 215
7447603100A 1000 20 50 MHz 2.8 180 250
7447603120A 1200 18 50 MHz 3.2 200 190
7447603150A 1500 18 50 MHz 5.88 160 210
7447603180A 1800 18 50 MHz 6.26 140 210
www.we-online.com/we-ki

WE-MCA
Multilayer Chip Antenna
■ SMD multilayer chip antenna ■ IoT devices
■ Extremely low profile ■ GSM 900
■ Omni-directional radiation pattern ■ WLAN/WiFi 2.4 & 5.5
■ Excellent size to performance ratio ■ Bluetooth
■ Smallest form factor in the industry ■ GPS/GNSS
■ Operating temperature: -40 °C up to +85 °C ■ Zigbee
■ LoRa 868 & 915
■ LPD433
Minimal ground clearance

for small devices www.we-online.com/we-mca
Single Band
Technical Data:
Frequency Range Gpeak Z
Order Code VSWR
(MHz) (dBi) (Ω)
7488910043 423 – 443 -4 2
7488910092 868 – 960 -0.7 2.5
7488910915 902 – 928 0.5 3
7488920157 1550 – 1600 3.4 2
7488930245 2400 – 2500 0.5 2 50
7488920245 2400 – 2500 1.3 2
7488940245 2400 – 2500 2 2
7488910245 2400 – 2500 3 2
7488960245 2400 – 2500 3 2.5
Frequency Range: Frequency Range Min & Max; Gpeak: Peak Gain; Z: Impedance
Dual Band
Technical Data:
Frequency Range Frequency Range 2 Gpeak Gpeak,2 Z
Order Code VSWR VSWR2
(MHz) (MHz) (dBi) (dBi) (Ω)
7488915724 1570 – 1580 2400 – 2500 0.69 0.97 2.5 2.5
7488912455 2400 – 2500 4900 – 5875 1 -1.5 2.2 2.2 50
7488922455 2400 – 2500 5000 – 6000 3 3.3 2 2
Frequency Range: Frequency Range Min & Max; Frequency Range 2: Frequency Range Min & Max 2; Gpeak: Peak Gain; Gpeak,2: Peak Gain 2; VSWR2: VSWR 2; Z: Impedance

Design Kits
Communications
Signal &
LAN Transformers
WE-LAN; LAN Transformers 749010
LAN Transformers & RJ45 Connectors without Magnetics 749615
RF Inductors
WE-KI HC 0402/0603; SMT High Current Ceramic Inductor 74476
WE-KI 0402; SMT Wire Wound Ceramic Inductor 744765A
WE-KI 0402; SMT Wire Wound Ceramic Inductor 744765G
WE-KI 0603; SMT Wire Wound Ceramic Inductor 744761
WE-KI 0603; SMT Wire Wound Ceramic Inductor 744761G
WE-KI 0805/1008; SMT Wire Wound Ceramic Inductor 744762G
WE-KI 0805/1008; SMT Wire Wound Ceramic Inductor 744762
WE-RFI; Ferrite SMT Inductor 744762A/RFI
WE-MK 0201; Multilayer Ceramic SMT Inductor 744785
WE-MK 0402A; Multilayer Ceramic SMT Inductor 744784A
WE-MK 0603A; Multilayer Ceramic SMT Inductor 744786A
WE-CAIR; Air Coil Inductor 74491

1 PASSIVE COMPONENTS  Signal & Communications  Focus Product
Focus Product
Super Tiny
Signal Transformer
WE-STST
The IEEE 802.3 compliant Signal Transformer
The Super Tiny Signal Transformer WE-STST series can save over
50 % of PCB space, as opposed to common ring core transformers.
With its extended temperature range up to +105 °C, this series can
be used for many different applications: industrial LAN interfaces,
factory automation, company networks, IoT and many more. IoT Smart Industry
Furthermore, it is suitable for different transmission speeds from
10/100Base-T up to 10GBase-T going through Base-T1 (Single Pair
Ethernet) and PoE applications.
1.5 kV AC / 2.25 kV DC isolation voltage Single Pair

Router Ethernet
IEEE 802.3 compliant
Over 50 % PCB space savings
Ethernet up to 10GBase-T
Single Pair Ethernet
Original Size

1.5 kV isolation voltage
350 µH OCL as per IEEE 802.3
Communications
Signal &
Over 90 % smaller
than a 0.01 € coin
For Single Pair Ethernet &

Ethernet 10/100/1000 Base-T &
Ethernet 2.5 G, 5 G and 10 G Base-T
More information about WE-STST:

www.we-online.com/we-stst
Learn more about Single Pair Ethernet:

www.we-online.com/spe

1 PASSIVE COMPONENTS  Signal & Communications  Additional Information
Single Pair Ethernet
One Pair is
all you need.
Würth Elektronik is the first manufacturer offering a
fully industrial compliant Single Pair Ethernet solution
on the PCB.
Industrial Design
Recommendation
3 WE-STST
1 ESD protection up to 1 WE-TVS
2 WE-CNSW
15 kV (IEC 61000-4-2)
2 Noise attenuation PHY Connector
3 Isolation 1.5 kV
L1
(IEC 62368-1)
D1
– Noise attenuation C2
4 T1
EMC isolation 5 WCAP-CSGP R1
5 EMC isolation C1
WCAP-CSMH 4
The whole interface solution is

compliant with IEEE 802.3cg / bw

10BASE-T1 100BASE-T1
WE-STST WE-STST
WE-TVS WE-TVS WE-CNSW
C2
PHY Connector PHY Connector
WCAP-CSGP
L1
D1 D1
C2 C2
T1 T1
R1 R1
WCAP-CSGP WCAP-CSGP
C1 C1
WCAP-CSMH WCAP-CSMH
Communications
Signal &
Signal Transformer Ceramic Capacitor TVS Diode Common Mode Line Filter
T1 WE-STST C1 WCAP-CSMH D1 WE-TVS L1 WE-CNSW

L x W x H: 4.7 x 3.22 x 2.9 mm Size: 1206 Size: DFN 1210-6L Size: 1206
Order Code: 74930000 Order Code: 885342208024 Order Code: 824012823 Order Code: 744232222
Data Rate: 10/100 BASE-T1 VDC: 2000 V ESD Protection up to 8 / 15 kV Z @ 100 MHz: 2200 Ω
L: 350 µH C: 1 nF (contact / air) IR: 200 mA
VT: 1500 VRMS VDC: 3.3 V
C2 WCAP-CSGP CCh: 0.18 pF
Size: 0402
Order Code: 885012205086
VDC: 50 V
C: 100 nF
C1
L1
D1
C2
More information:
T1
www.we-online.com/spe

Internet of Things (IoT)
What is IoT?
Internet of things is a summarizing term for the next generation of smart devices that can transmit/receive data over a network autonomously.
IoT devices and the data they generate, provide much needed connectivity for a range of new applications and have profound effects on our
private and social life. Some of these applications include:
Industrial automation
Healthcare & fitness
Home automation
Smart cities & smart energy
Smart farming / agriculture
Industry 4.0 or the Industrial IoT (IIoT) is the digitization of industrial assets and processes that connects products, machines, services,
locations / sites to workers, managers, suppliers, and partners.
Warehouse monitoring
Fast and secure communication via
satellites for information processing
Building monitoring
and control
Inventory tracking & control
GPS tracking in real time
One of the applications of IoT is the tracking of goods and shipments in a warehouse. Having full knowledge of where everything is located at
any moment, makes the warehouse much more efficient resulting in saving time and money.

Component Overview
The Würth Elektronik RF portfolio covers a wide variety of frequency ranges starting from KHz all the way up to several GHz bands. Here are
some of the product series that can be easily integrated into your IoT device.
Wire Wound Ceramic Multilayer

Antenna Quartz Oscillator
Ceramic Inductor Inductor
WE-MCA WE-KI WE-MK WE-SPXO
SMD multilayer SMD RF wire Multilayer Simple Packaged
chip antenna wound ceramic Ceramic SMT Quartz Oscillator
Inductors Inductor
Capacitor Balun Shielding Cabinets Complete Solutions
Communications
WCAP-CSRF WE-BAL WE-SHC Wireless
Signal &
SMD RF multi- Multilayer Chip Seamless Connectivity
layer ceramic Balun High Frequency & Sensors
capacitors Shielding Radio modules,
Cabinet GNSS modules
& sensors
See our complete portfolio:

www.we-online.com/rfcomponents
Application Example: Plug-and-Track GPS Device Based

on the Latest GPS Technology
P roviding ultra-fast acquisition / reacquisition
thanks to the exceptional efficiency of our
antennas and the perfect matching circuit.
Exceptional tracking sensitivity for tracking and
navigation in difficult signal environments while
using our filters and customized shielding
solutions.
Get Your IoT Device Matched!

Antenna Matching Service
Optimized antenna performance More information about Antenna Matching:
Customer support for antenna placement in design phase www.we-online.com/antennamatching
Smallest antennas with less ground clearance requirements
Application Note WE-MCA Multilayer Chip

Antenna Placement & Matching:
www.we-online.com/ANP057

Simulate and Select Components

in REDEXPERT
RF Antennas
RF Filters
RF Inductors
RJ45 LAN Transformers
RF Balun
Select by electrical and

mechanical parameters
Compare schematics fast and easily
Try it out: Filter for features such as “USB ports or
www.we-online.com/redexpert-signal-communications tab-up or tab-down”

Direct access to data sheets

Quartz & Oscillators
Oscillators
Quartz &
Product Overview 104
Products 105
Design Kits 109
99
1 PASSIVE COMPONENTS  Quartz & Oscillators
WE-XTAL (Quartz Crystal)
Model Frequency (MHz) / Max. Temperature Range (°C) Stability* min. (ppm) Size (mm)
0 MHz 10 MHz 20 MHz 30 MHz 40 MHz
-50 °C 0 °C +50 °C +100 °C +150 °C 10 ppm 20 ppm 30 ppm 40 ppm 50 ppm
HC49 / 3.2768 – 25 MHz

4HSMX -40 to +85 °C 13.4 x 4.9
3.2768 – 27.12 MHz

HC49 / 4H 11.05 x 4.7
-20 to +70 °C
1.8432 – 30 MHz
HC49 -10 to +60 °C 11.05 x 4.65
8 – 30 MHz
12SMX 7.0 x 5.0
-20 to +70 °C
8 – 48 MHz
CFPX-104 -40 to +85 °C 5.0 x 3.2
8 – 50 MHz
CFPX-180 3.2 x 2.5
-40 to +125 °C
16 – 50 MHz
CFPX-218 2.5 x 2.0
-40 to +85 °C
16 – 48 MHz
IQXC-42 2.0 x 1.6
-40 to +85 °C
24 – 48 MHz
IQXC-26 1.6 x 1.2
-40 to +85 °C
* Stability min. for the widest operating temperature range

WE-XTAL (Watch Crystal)
Model Frequency (MHz) ESR (kΩ) Size (mm)
0 MHz 0.01 MHz 0.02 MHz 0.03 MHz 0.04 MHz 20 kΩ 40 kΩ 60 kΩ 80 kΩ 100 kΩ
85SMX 0.032768 MHz 8.7 x 3.8
CFPX-217 0.032768 MHz 3.2 x 1.5
CFPX-56 0.032768 MHz 2.0 x 6.0
Watch 0.032768 MHz 2.0 x 6.0 or

3.0 x 8.0
IQXC-25 0.032768 MHz 2.0 x 1.2
Oscillators
Quartz &
IQXC-90 0.032768 MHz 1.6 x 1.0

WE-SPXO (Simple Packaged Quartz Oscillator)
Model / Signal Type Frequency (MHz) / Max. Temperature Range (°C) Stability* min. (ppm) / Voltage (V) Size (mm)
0 MHz 50 MHz 100 MHz 150 MHz 200 MHz 25 ppm 50 ppm 75 ppm 100 ppm 125 ppm
-50 °C 0 °C +50 °C +100 °C +150 °C 2V 3V 4V 5V 6V
CFPS-72 4 – 80 MHz
HCMOS / TTL -40 to 85 °C 7.0 x 5.0
CFPS-73 3.6864 – 125 MHz

HCMOS -40 to 85 °C 7.0 x 5.0
CFPS-9 4 – 50 MHz
CMOS -40 to 85 °C 5.0 x 3.2
CFPS-39 8 – 125 MHz

CMOS -40 to 85 °C 3.2 x 2.5
IQXO-618-33 100 – 156.25 MHz

LVDS -40 to 55 °C 3.2 x 2.5
IQXO-624 100 – 156.25 MHz

LVPECL -40 to 55 °C 3.2 x 2.5
IQXO-618-25 100 – 156.25 MHz

LVDS -40 to 55 °C 3.2 x 2.5
IQXO-623 100 – 156.25 MHz

LVPECL -40 to 55 °C 3.2 x 2.5
IQXO-791 4 – 50 MHz
HCMOS -40 to 85 °C 2.5 x 2.0
IQXO-794 4 – 50 MHz
HCMOS -40 to 85 °C 2.5 x 2.0
IQXO-540 4 – 50 MHz
CMOS -40 to 85 °C 2.0 x 1.6
IQXO-542 4 – 50 MHz
CMOS -40 to 85 °C 2.0 x 1.6
CFPS-104 0.032768 MHz

CMOS -40 to 125 °C 3.2 x 2.5
CFPS-102 0.032768 MHz

CMOS -40 to 125 °C 3.2 x 2.5

Model / Signal Type Frequency (MHz) / Max. Temperature Range (°C) Stability* min. (ppm) / Voltage (V) Size (mm)
0 MHz 50 MHz 100 MHz 150 MHz 200 MHz 25 ppm 50 ppm 75 ppm 100 ppm 125 ppm
-50 °C 0 °C +50 °C +100 °C +150 °C 2V 3V 4V 5V 6V
CFPS-109 0.032768 MHz

CMOS -40 to 125 °C 2.5 x 2.0
CFPS-107 0.032768 MHz

CMOS -40 to 125 °C 2.5 x 2.0
IQXO-402 0.032768 MHz

CMOS -40 to 125 °C 2.0 x 1.6
IQXO-404 0.032768 MHz

CMOS -40 to 125 °C 2.0 x 1.6
Oscillators
Quartz &

Product Overview

WE-XTAL
Quartz Crystals Crystal Oscillators

Extended WE-XTAL Extended WE-SPXO
Frequency: 1.84320 – 50 MHz Frequency: 32.768 kHz,
Model: HC49, HC49/4H, 12SMX, 3.6864 – 156.25 MHz
CFPX-104, CFPX-180, CFPX-218, Model: CFPS-39, CFPS-72, CFPS-73,
HC49/4HSMX, IQXC-26, IQXC-42 CFPS-9, IQXO-540, IQXO-542,
IQXO-791, IQXO-794, IQXO-618-25,
WE-XTAL (Watch) IQXO-618-33, IQXO-623, IQXO-624,
Frequency: 32.7680 kHz CFPS-102, CFPS-104, CFPS-107,
Model: Watch, 85SMX, CFPX-217, CFPS-109, IQXO-402, IQXO-404
CFPX-56, IQXC-25, IQXC-90
All Frequency Products at a glance:

www.we-online.com/frequency-products

Modelithics

1 PASSIVE COMPONENTS  Quartz & Oscillators  Products
WE-SPXO
Crystal Oscillator
■ SMT models ■ Microprocessor
■ Hermetically sealed ■ Wireless communication devices
■ Frequencies between 3.6864 MHz and 156.25 MHz ■ Industrial devices
plus 32.768 kHz ■ Real time clocks
■ Stabilities down to ±25 ppm ■ Wired communication (e.g. Ethernet and USB)
■ Available supply voltages: 1.8 V, 2.5 V, 3.3 V and 5 V ■ IoT
■ Available output signal types: CMOS; HCMOS/TTL; ■ Optical network
LVDS; LVPECL ■ Audio and multimedia devices
■ Max. operating temperature: -40 °C up to +125 °C ■ Test and measurement equipment
■ Navigation and locators
www.we-online.com/we-spxo
IQXO-618-25
Technical Data:
Operating
f Stability VSupply L W H
Order Code Temperature Output Logic
(MHz) (ppm) (V) (mm) (mm) (mm)
(°C)
830208332209 100
830207511509 125 50 2.5 -40 up to +105 LVDS 3.2 2.5 1
Oscillators
Quartz &
830208332309 156.25
f: Frequency; VSupply: Supply Voltage; L: Length; W: Width; H: Height
IQXO-618-33
Technical Data:
Operating
(°C)
830208331709 100
830208331909 125 50 3.3 -40 up to +105 LVDS 3.2 2.5 1
830208332009 156.25
IQXO-623
Technical Data:
Operating
(°C)
830208332501 100
830208332601 125 50 2.5 -40 up to +105 LVDS 3.2 2.5 1.1
830208332701 156.25

WE-SPXO
Crystal Oscillator
IQXO-624
Technical Data:
Operating
(°C)
830208334301 100
830208334501 125 50 3.3 -40 up to +105 LVPECL 3.2 2.5 1.1
830208334601 156.25
CFPS-72
Technical Data:
Operating
(°C)
830202536501 10 25 5 -40 up to +85 HCMOS/TTL 7 5 1.4
IQXO-404
Technical Data:
Operating
(kHz) (ppm) (V) (mm) (mm) (mm)
(°C)
830207370601 30 -40 up to +85
32.768 1.8 CMOS 2 1.6 0.8
830207370701 100 -40 up to +125
IQXO-402
Technical Data:
Operating
(°C)
830207370001 30 -40 up to +85
32.768 3.3 CMOS 2 1.6 0.8
830207370101 100 -40 up to +125
CFPS-107
Technical Data:
Operating
(°C)
830206385009 30 -40 up to +85
32.768 1.8 CMOS 2.5 2 0.95
830208229109 100 -40 up to +125

CFPS-109
Technical Data:
Operating
(°C)
830207390509 30 -40 up to +85
32.768 3.3 CMOS 2.5 2 0.95
830208229409 100 -40 up to +125
CFPS-102
Technical Data:
Operating
(°C)
830205297709 25 -40 up to +85
32.768 1.8 CMOS 3.2 2.5 1.2
830208228309 100 -40 up to +125
CFPS-104
Oscillators
Quartz &
Technical Data:
Operating
(°C)
830205028309 25 -40 up to +85
32.768 1.8 CMOS 3.2 2.5 1.2
830208228609 100 -40 up to +125

WE-XTAL
Quartz Crystals
■ SMT models ■ Microprocessor
■ Hermetically sealed ■ Wireless communication devices
■ Frequencies between 1.8432 MHz and 50 MHz ■ Industrial devices
plus 32.768 kHz ■ Real time clocks
■ Tolerances down to ±10 ppm ■ Wired communication (e.g. Ethernet and USB)
■ Stabilities down to ±10 ppm ■ IoT
■ Max. operating temperature: -40 °C up to +125 °C ■ Optical network
■ Audio and multimedia devices
■ Test and measurement equipment
■ Navigation and locators
■ Wearables
www.we-online.com/we-xtal
IQXC-42
Technical Data:
Operating
f Stability Cload L W H
Order Code Tol. f Temperature
(MHz) (ppm) (pF) (mm) (mm) (mm)
(°C)
830108288709 16 ±10 ppm 30 10 -40 up to +105 2 1.6 0.5
f: Frequency; Tol. f: Frequency Tolerance; Cload: Load Capacitance; L: Length; W: Width; H: Height
CFPX-180
Technical Data:
Operating
(°C)
830108313809 8 ±30 ppm 50 12 -40 up to +85
830108338709 10 ±20 ppm 50 12 -40 up to +105
830105420809 12 ±10 ppm 10 10 -20 up to +70
830108338809 12 ±20 ppm 30 12 -40 up to +105
830105961109 13.56 ±20 ppm 30 18 -40 up to +85
3.2 2.5 0.8
830107878109 16 ±30 ppm 50 12 -40 up to +125
830108340709 24 ±20 ppm 50 12 -40 up to +105
830108340809 25 ±20 ppm 30 12 -40 up to +105
830105863709 25 ±30 ppm 30 12 -40 up to +85
830108340909 26 ±10 ppm 20 12 -40 up to +105
CFPX-104
Technical Data:
Operating
(°C)
830106162701 8
±20 ppm 30 16 -40 up to +85 5 3.2 1
830106163301 13.56

Design Kits

Oscillators
Quartz &
WE-XTAL; 32.768 kHz Watch Crystals 830001
WE-XTAL; Surface Mount Ceramic Package Quartz Crystals 830002
WE-XTAL; Through Hole and Surface Mount Metal Can Quartz Crystals 830003

1 PASSIVE COMPONENTS  Quartz & Oscillators  Additional Information
Quartz Crystals
Crystal Specification
Frequency [kHz or MHz]
Package size (model and dimensions)
Tolerance [ppm] – The frequency accuracy at 25 °C
Stability [ppm]* – The frequency change over operating
temperature range
Operating temperature range [°C]*
Circuit load condition CLoad [pF]
– For capacitive load (CLoad) value the stray PCB capacitance
and the IC pin capacitance should be considered.
– Full CL value must match that of the crystal specification
– CL = (C1*C2) / (C1+C2) + Cstray
– Cstray = μP pin stray + PCB Stray ≈ 3 pF to 6 pF
* Not relevant for watch crystal.
Capacitive Load
PCB Layout Design Considerations
Ground plane under the Crystal as close as possible to the IC

crystal connected to IC ground
Single trace between crystal pins, the external capacitors
and the microprocessor must be kept as short as possible.
Guard the crystal traces with

ground traces (guard ring). XTAL
Avoid loops
Must be a clean ground with EXTAL
no current to or from other GND

Where applicable
devices flowing through the Micro- connect the crystal housing
guard ring. Guard ring Processor to the ground plane
connected to the microcontroller
ground. DIO
Load capacitors should be
No vias on crystal trace low leakage and stable
across temperature range
Keep digital signal and (NPO or COG type)
power traces as far away
from the crystal connections
as possible

Oscillators
Oscillator Specification
Frequency [MHz or kHz]
Package size (model and dimensions)
Stability [ppm] – The frequency change over operating
temperature range
Supply voltage [V]
Output level (CMOS, HCMOS, HCMOS/TTL)
Operating temperature range [°C]
PCB Layout Design Considerations
Oscillators
Quartz &
No GND plane under Power decoupling
the oscillator Capacitors
V + Via 10 nF 100 nF and 10 nF
GND VIA
GND VIA
100 kΩ pull up 100K 100 nF

XTAL_OUT
resistor if EN/DIS Oscillator RF output
GND VIA XTAL_IN
function not required connects to IC crystal input
GND
Micro-
GND Via to shorten Processor
current path
DIO
RF line as short as
possible Keep digital signals and power
No Vias on RF line traces as far away from the
Oscillator RF output as possible

Capacitors
Products 116
Design Kits 127
112
1 PASSIVE COMPONENTS  Capacitors
Product Overview

WCAP-ATG8
Electrolytic Capacitors
Aluminum Electrolytic Capacitors
Radial THT V-Chip SMT Snap-In
WCAP-ATG8 WCAP-ASLI WCAP-AIG8

General Purpose +85 °C Low Impedance General Purpose +85 °C
C: 0.1 – 33000 µF C: 0.1 – 6800 uF C: 47 – 6800 µF
UR: 10 – 400 VDC UR: 6.3 – 100 VDC UR: 63 – 450 VDC
Temp.: -40 °C or -25 °C up to +85 °C Temp.: -55 °C up to +105 °C Temp.: -40 °C or -25 °C up to +85 °C
Endurance: 2000 h Endurance: 2000 h Endurance: 2000 h
WCAP-ATG5 WCAP-ASLL WCAP-AIE8

General Purpose +105 °C Low Impedance & Long Life Long Life
C: 0.1 – 18000 µF C: 1.0 – 6800 µF C: 68 – 6800 µF
UR: 10 – 400 VDC UR: 6.3 – 450 V DC UR: 63 – 450 VDC
Temp.: -40 °C or -25 °C to +105 °C Temp.: -55 °C or -40 °C up to +105 °C Temp.: -40 °C or -25 °C up to +85 °C
Capacitors
Endurance: 2000 h Endurance: 2000 – 5000 h Endurance: 3000 h
WCAP-AT1H WCAP-ASLU WCAP-AIG5

Long Life Low Leakage Current General Purpose +105 °C
C: 6.8 – 3300 µF C: 0.1 – 330 µF C: 33 – 10000 µF
Endurance: 5000 – 10000 h Endurance: 1000 – 2000 h Endurance: 2000 h
WCAP-ATET WCAP-ASNP WCAP-AI3H

High Temperature +125 °C Non-Polar Long Life
C: 0.47 – 1000 µF C: 0.1 – 560 µF C: 68 – 10000 µF
Endurance: 1000 – 2000 h Endurance: 2000 h Endurance: 3000 h
WCAP-ATLI WCAP-AS5H
Low Impedance Long Life
C: 4.7 – 6800 µF C: 0.1 – 1000 µF
UR: 10 – 100 VDC UR: 6.3 – 50 VDC
Temp.: -55 °C up to +105 °C Temp.: -40 °C up to +105 °C
Endurance: 2000 – 5000 h Endurance: 5000 h
WCAP-ATUL
Low Leakage & Long Life
C: 22 – 4700 µF
UR: 10 – 100 VDC
Temp.: -40 °C up to +105 °C
Endurance: 4000 – 10000 h
WCAP-ATLL
Long Life
C: 0.47 – 6800 µF
UR: 10 – 50 VDC
Temp.: -55 °C up to +105 °C
Endurance: 3000 – 10000 h

Product Overview
Aluminum Polymer Capacitors
Radial THT V-Chip SMT H-Chip SMT

WCAP-PTG5 WCAP-PSLC WCAP-PHGP
General Purpose +105 °C Large Capacitance General Purpose
C: 39 – 2000 µF C: 10 – 2000 µF C: 100 – 560 µF
UR: 6.3 – 25 VDC UR: 6.3 – 100 VDC UR: 2 – 6.3 VDC
Temp.: -55 °C up to +105 °C Temp.: -55 °C up to +105 °C Temp.: -55 °C up to +105 °C
WCAP-PTHR WCAP-PSLP WCAP-PHLE

Low ESR & High Voltage Low Profile Low ESR
C: 10 – 150 µF C: 4.7 – 390 µF C: 100 – 560 µF
UR: 35 – 100 VDC UR: 6.3 – 100 VDC UR: 2 – 6.3 VDC
WCAP-PTHT WCAP-PSHP WCAP-PHSE

High Temperature +125 °C High Ripple Current Super Low ESR
C: 22 – 2000 µF C: 6.8 – 1200 µF C: 330 – 560 µF
UR: 6.3 – 50 VDC UR: 6.3 – 100 VDC UR: 2 – 2.5 VDC
Endurance: 2000 h Endurance: 2000 – 5000 h Endurance: 2000 h
WCAP-PT5H
Long Life
C: 22 – 2000 µF
UR: 6.3 – 35 VDC
Temp.: -55 °C up to +105 °C
Endurance: 5000 h
MLCCs – Multilayer Ceramic DC Film Capacitors Supercapacitors (EDLCs)

Chip Capacitors
SMT-Chip Boxed THT Radial THT
WCAP-CSGP WCAP-FTBP Boxed Type WCAP-STSC

General Purpose Metallized Polypropylene Standard Cylindrical
C: 0.5 pF – 100 µF C: 33 nF – 6.8 µF C: 3 – 50 F
UR: 6.3 – 100 VDC UR: 160 – 630 VDC UR: 2.7 VDC
Ceramic: NP0, X7R, X5R Pitch: 7.5 / 10.0 / 15.0 / 22.5 / 27.5 mm Temp: -40 °C up to +65 °C
Dielectric: Polypropylene
WCAP-CSMH
Mid and High Voltage WCAP-FTBE Boxed Type
C: 10 pF – 470 nF Metallized Polyester
UR: 200 – 3.000 VDC C: 10 nF – 6.8 µF
Ceramic: NP0, X7R UR: 100 – 1.000 VDC
Pitch: 7.5 / 10.0 / 15.0 / 22.5 /
WCAP-CSRF 27.5 / 37.5 mm
High Frequency Dielectric: Polyester
C: 0.2 pF – 33 pF
UR: 25 – 50 VDC
Ceramic: NP0
WCAP-CSST
Soft Termination
C: 220 pF – 2.2 µF
UR: 16 – 2.000 VDC
Ceramic: X7R

Safety Capacitors (X/Y) All Capacitors at a glance
www.we-online.com/capacitors
Film Capacitors
Boxed THT
WCAP-FTXX Explore our application notes for

X2-Capacitors Capacitors:
C: 5.6 nF – 6.8 µF
UR: 310 VAC www.we-online.com/appnotes
Pitch: 7.5 / 10.0 / 12.5 / 15.0 / 22.5 /
27.5 / 37.5 mm
Safety class: X2
WCAP-FTX2
X2-Capacitors  PCB library: Altium Designer, EAGLE,
C: 5.6 nF – 6.8 µF
UR: 275 VAC Cadence OrCAD & Allegro, Zuken
Pitch: 7.5 / 10.0 / 12.5 / 15.0 / 22.5 / CAD-Star
27.5 / 37.5 mm
Safety class: X2  S-Parameter & SPICE model:
S-Parameter, LTspice, PSpice, Spectre
SMT-Chip Modelithics
WCAP-CSSA
Safety Capacitors
C: 33 pF – 4.7 nF
UR: 250 VAC
Ceramic: NP0, X7R
Safety class: X1 / Y2, X2
Capacitors

1 PASSIVE COMPONENTS  Capacitors  Products
WCAP-PHGP
■ General purpose product series with max. operating ■ Noise suppression
temperature of +105 °C ■ Input and output capacitor for DC/DC converter
■ High ripple current capability ■ e.g. USB charger, smart meter, power bank
■ Low profile
■ Mounting style: H-Chip SMT
■ Capacitance range: 100 µF – 560 µF
■ Capacitance tolerance: ±20 %
■ Voltage range (UR): 2 – 6.3 VDC
■ Endurance: 2000 h @ +105 °C
■ Recommended soldering: Reflow
General Purpose +105 °C www.we-online.com/wcap-phgp
H-Chip SMT
Technical Data:
C VR IRIPPLE DF RESR max.* ILeak max.** Endurance L W H
Order Code
(µF) (VDC) (mA) (%) (mΩ) (µA) (h) (mm) (mm) (mm)
875016219004 330 2 5600 12 66
875016219005 390 2 5100 15 78
875016219006 470 2 5100 15 94
875016219007 560 2 5100 15 112
875016319002 330 2.5 5100 15 82.5
875016319003 390 2.5 5100 15 97.5
875016319004 470 2.5 5100 15 117.5
6 2000 7.3 4.3 1.9
875015019003 180 4 5600 12 72
875015019004 220 4 5600 12 88
875015019005 330 4 5100 15 132
875015119003 100 6.3 5100 15 63
875015119004 150 6.3 5600 12 94.5
875015119005 180 6.3 5100 15 113.4
875015119006 220 6.3 5100 15 138.6
C: Capacitance; VR: Rated Voltage; IRIPPLE: Ripple Current; DF: Dissipation Factor; RESR max.: ESR; ILeak: Leakage Current; L: Length; W: Width; H: Height
* 100 kHz / +20 °C
** 2 minutes / +20 °C

WCAP-PHLE
■ Low ESR product series ■ Noise suppression
■ High ripple current capability ■ Input and output capacitor for DC/DC converter
■ Low profile ■ e.g. USB charger, smart meter, power bank,
■ Mounting style: H-Chip SMT server, SSD
■ Capacitance range: 100 µF – 560 µF
■ Capacitance tolerance: ±20 %
■ Voltage range (UR): 2 – 6.3 VDC
■ Endurance: 2000 h @ +105 °C
Low ESR +105 °C www.we-online.com/wcap-phle
H-Chip SMT
Technical Data:
C VR IRIPPLE DF RESR max.* ILeak max.** Endurance L W H
Order Code
(µF) (VDC) (mA) (%) (mΩ) (µA) (h) (mm) (mm) (mm)
875036219012 330 2 8500 4.5 66
875036219015 390 2 8500 4.5 78
875036219018 470 2 8500 4.5 94
875036219019 560 2 8500 4.5 112
875036319012 330 2.5 8500 4.5 82.5
875036319015 390 2.5 8500 6 4.5 97.5 2000 7.3 4.3 1.9
875036319018 470 2.5 8500 4.5 117.5
875035019001 100 4 6300 9 40
875035019002 180 4 6300 9 72
875035019003 220 4 6300 9 88
875035119002 180 6.3 6300 9 113.4
Capacitors
C: Capacitance; VR: Rated Voltage; IRIPPLE: Ripple Current; DF: Dissipation Factor; RESR max.: ESR; ILeak: Leakage Current; L: Length; W: Width; H: Height
* 100 kHz / +20 °C
** 2 minutes / +20 °C

WCAP-STSC
Supercapacitors (EDLCs)
■ Electric Double Layer Capacitors ■ Memory backup
■ Mounting style: Radial THT ■ Smart meter
■ Capacitance range: 3 F – 50 F ■ Network equipment
■ Rated voltage: 2.7 VDC ■ UPS systems
■ Operating temperature: -40 °C up to +65 °C ■ Power assist
■ Energy harvesting
Standard Cylindrical +65 °C www.we-online.com/wcap-stsc
Radial THT
Technical Data:
P E Endur-
C VR RESR DC RESR AC ILeak IMax IRated ØD L Pitch
Order Code (kW/ (Wh/ ance
(F) (VDC) (mΩ) (mΩ) (mA) (A) (A) (mm) (mm) (mm)
kg) kg) (Cycles)
850617030001 3 70 60 0.008 3.3 0.7 18.08 2.1 8 20 3.5
850617021001 5 50 40 0.012 5.4 1.29 17.35 2.41 10 20 5
850617021002 7 45 35 0.02 7.1 1.7 18.92 3.3 10 20 5
850617021004 10 2.7 35 30 0.03 10 2.5 19.1 3.7 500000 10 25 5
850617021005 15 33 30 0.06 13.5 3.6 12.27 3.3 13 25 5
850617022001 25 25 20 0.068 20.7 6 10.72 3.7 16 25 7.5
850617022002 50 20 15 0.105 33.7 11.2 8.13 4.5 18 40 7.5
C: Capacitance; VR: Rated Voltage; RESR DC: ESR; RESR AC: ESR; ILeak: Leakage Current; IMax: Max. Discharge Current; IRated: Rated Discharge Current; P: Power Density;
E: Energy Density; Ø D: Diameter; L: Length

WCAP-CSRF
MLCCs – High Frequency
■ High frequency product series ■ High frequency applications
■ Mounting style: SMT-Chip ■ Antenna matching
■ Ceramic: NP0 (Class I)
■ Capacitance range: 0.2 pF – 33 pF
■ Temperature coefficient: ±30 ppm/°C
■ Voltage range (UR): 25 – 50 VDC
■ Operating temperature: -55 °C up to + 125 °C
■ Sizes: 0201 / 0402
■ Termination: Cu/Ni/Sn
www.we-online.com/wcap-csrf
Size 0201
Technical Data:
C VR RISO L W H
Order Code Tol. C Qmin.
(pF) (VDC) (GΩ) (mm) (mm) (mm)
885392004001 0.2 ±0.05 pF 404
885392004002 1 ±0.1 pF 420
885392004003 1.2 ±0.1 pF 424
885392004004 1.5 ±0.1 pF 430
885392004005 2.2 ±0.1 pF 444
885392004006 2.7 ±0.1 pF 25 454 10 0.6 0.3 0.3
885392004007 3.3 ±0.1 pF 466
885392004008 4.7 ±0.25 pF 494
885392004009 5.6 ±0.25 pF 512
885392004010 9 ±0.5 pF 580
885392004011 33 ±5 % 1000
Capacitors
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; Qmin.: Q-Factor; RISO: Insulation Resistance; L: Length; W: Width; H: Height
Size 0402
Technical Data:
C VR RISO L W H
Order Code Tol. C Qmin.
(pF) (VDC) (GΩ) (mm) (mm) (mm)
885392005001 0.3 ±0.1 pF 406
885392005002 0.4 ±0.05 pF 408
885392005003 0.4 ±0.1 pF 408
885392005004 0.5 ±0.05 pF 410
885392005005 1 ±0.05 pF 420
885392005006 1 ±0.1 pF 420
885392005007 1.5 ±0.1 pF 430
50 10 1 0.5 0.5
885392005008 1.8 ±0.1 pF 436
885392005009 2.3 ±0.05 pF 446
885392005010 3 ±0.1 pF 460
885392005011 3.3 ±0.1 pF 466
885392005012 4.7 ±0.1 pF 494
885392005013 5.6 ±0.1 pF 512
885392005014 9 ±0.25 pF 580
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; Qmin.: Q-Factor; RISO: Insulation Resistance; L: Length; W: Width; H: Height

WCAP-CSST
MLCCs – Soft Termination
■ Product series with high absorption of ■ Application with high mechanical stress
mechanical stress ■ Power supply
■ Mounting style: SMT chip ■ e.g. Lighting
■ Ceramic: X7R (Class II)
■ Capacitance range: 220 pF – 2.2 µF
■ Temperature coefficient: ±15 %
■ Voltage range (UR): 16 VDC – 2 kVDC
■ Sizes: 0603 / 0805 / 1206 / 1210
■ Termination: Ag-Polymer/Ni/Sn
■ Wave soldering only valid for 0603,
0805 with thickness ≤ 0.85 mm www.we-online.com/wcap-csst
Size 0603
Technical Data:
VR DF RISO L W H
Order Code C Tol. C
(VDC) (%) (GΩ) (mm) (mm) (mm)
885382206001 220 pF 50 2.5 10
885382206005 1 nF 200 2.5 10
885382206002 10 nF ±10 % 50 2.5 10 1.6 0.8 0.8
885382206003 22 nF 50 2.5 10
885382206004 100 nF 50 3 5
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; DF: Dissipation Factor; RISO: Insulation Resistance; L: Length; W: Width; H: Height
Size 0805
Technical Data:
VR DF RISO L W H
Order Code C Tol. C
(VDC) (%) (GΩ) (mm) (mm) (mm)
885382207010 270 pF 500 2.5 10
885382207004 1 nF 50 2.5 10
885382207005 2.2 nF 50 2.5 10
885382207006 10 nF 50 2.5 10
885382207009 10 nF 100 2.5 10
±10 % 2 1.25 1.25
885382207007 100 nF 50 2.5 5
885382207008 220 nF 50 3 2.3
885382207002 330 nF 25 3.5 1.5
885382207001 1 µF 16 5 0.5
885382207003 1 µF 25 5 0.5

Size 1206
Technical Data:
VR DF RISO L W H
Order Code C Tol. C
(VDC) (%) (GΩ) (mm) (mm) (mm)
885382208008 270 pF 500 2.5 10 1.25
885382208013 470 pF 2000 2.5 10 1.25
885382208014 680 pF 2000 2.5 10 1.25
885382208012 4.7 nF 1000 2.5 10 1.25
885382208002 10 nF 50 2.5 10 1.25
885382208009 10 nF 500 2.5 10 1.25
885382208010 22 nF 500 2.5 4.5 1.6
±10 % 3.2 1.6
885382208011 33 nF 500 2.5 3 1.6
885382208003 100 nF 50 2.5 5 1.25
885382208006 100 nF 100 2.5 1 1.25
885382208007 100 nF 250 2.5 1 1.6
885382208004 470 nF 50 3 1 1.6
885382208005 1 µF 50 3 0.5 1.6
885382208001 2.2 µF 25 3.5 0.2 1.6
Size 1210
Technical Data:
VR DF RISO L W H
Order Code C Tol. C
(VDC) (%) (GΩ) (mm) (mm) (mm)
885382209001 33 nF 500 2.5 3 1.6
±10 % 3.2 2.5
885382209002 2.2 µF 100 5 0.05 2.5
Capacitors

WCAP-CSSA
MLCCs – Safety Capacitors
■ High capacitance stability ■ Interference suppression
■ Certificates: TÜV, cULus ■ Filter in power supplies
■ Safety class: X1/Y2, X2
■ Mounting style: SMT chip
■ Ceramic: NP0 (Class I), X7R (Class II)
■ Capacitance range: 33 pF – 4.7 nF
■ Rated Voltage (UR): 250 VAC
■ Operating temperature: -55 °C up to + 125 °C
■ Sizes: 1808 / 1812 / 2211 / 2220
Product series for www.we-online.com/wcap-cssa
interference suppression
Size 1808
Technical Data:
VIMP Safety DF RISO L W H
Order Code C Tol. C Ceramic
(VDC) Class (%) (GΩ) (mm) (mm) (mm)
8853620100091 33 pF ±5 % 2500 X2 NP0 Class I 0.1 100 1.4
8853520100071 33 pF ±5 % 5000 X1 / Y2 NP0 Class I 0.1 100 1.4
8853620100111 47 pF ±5 % 2500 X2 NP0 Class I 0.1 100 1.6
8853620100171 100 pF ±5 % 2500 X2 NP0 Class I 0.1 100 2
8853622100181 150 pF ±10 % 2500 X2 X7R Class II 2.5 10 1.6
4.5 2
8853620100181 220 pF ±5 % 2500 X2 NP0 Class I 0.1 100 2
8853622100091 470 pF ±10 % 2500 X2 X7R Class II 2.5 10 1.6
8853622100131 680 pF ±10 % 2500 X2 X7R Class II 2.5 10 1.6
8853622100171 1 nF ±10 % 2500 X2 X7R Class II 2.5 10 2
8853522100131 1 nF ±10 % 5000 X1 / Y2 X7R Class II 2.5 10 2
C: Capacitance; Tol. C: Capacitance (Tolerance); VIMP: Impulse Voltage; DF: Dissipation Factor; RISO: Insulation Resistance; L: Length; W: Width; H: Height
Size 1812
Technical Data:
VIMP Safety DF RISO L W H
Order Code C Tol. C Ceramic
(VDC) Class (%) (GΩ) (mm) (mm) (mm)
8853522110011 470 pF 5000 X1 / Y2 1.6
8853522110021 680 pF 5000 X1 / Y2 2
8853622110111 1 nF ±10 % 2500 X2 X7R Class II 2.5 10 4.5 3.2 1.6
8853522110031 1 nF 5000 X1 / Y2 2.5
8853622110151 2.2 nF 2500 X2 2.5

Size 2211
Technical Data:
C VIMP Safety DF RISO L W H
Order Code Tol. C Ceramic
(nF) (VDC) Class (%) (GΩ) (mm) (mm) (mm)
8853522130111 1
±10 % 5000 X1 / Y2 X7R Class II 2.5 10 5.7 2.8 2.5
8853522130151 2.2
Size 2220
Technical Data:
C VIMP Safety DF RISO L W H
Order Code Tol. C Ceramic
(nF) (VDC) Class (%) (GΩ) (mm) (mm) (mm)
8853522140011 4.7 ±10 % 5000 X1 / Y2 X7R Class II 2.5 10 5.7 5 2.5
Capacitors

WCAP-CSMH
MLCCs – Mid and High Voltage
■ Product series for mid and high voltage up to ■ Ports protection against EFT and surge
3 kVDC ■ Blocking
■ Mounting style: SMT chip ■ High voltage coupling
■ Ceramic: NP0 (Class I), X7R (Class II) ■ Snubber
■ Capacitance range: 10 pF – 470 nF
■ Voltage range (UR): 200 VDC – 3 kVDC
■ Sizes: 0603 / 0805 / 1206 / 1210 / 1808 / 1812
■ Wave soldering only valid for 0603,
0805 with thickness ≤ 0.85 mm
Mid and high voltage up to 3 kVDC www.we-online.com/wcap-csmh
Size 0603
Technical Data:
VR DF RISO L W H
Order Code C Tol. C Ceramic Qmin.
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342006001 10 pF ±5 % NP0 Class I – 600
885342206006 10 nF ±10 % X7R Class II 2.5 –
885342006002 33 pF ±5 % NP0 Class I – 1000
885342006003 100 pF ±5 % NP0 Class I – 1000
885342206001 100 pF ±10 % X7R Class II 2.5 –
885342006004 220 pF ±5 % 250 NP0 Class I – 1000 10 1.6 0.8 0.8
885342206002 330 pF ±10 % X7R Class II 2.5 –
885342006005 470 pF ±5 % NP0 Class I – 1000
885342206003 1 nF ±10 % X7R Class II 2.5 –
885342206004 1.5 nF ±10 % X7R Class II 2.5 –
885342206005 3.3 nF ±10 % X7R Class II 2.5 –
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; DF: Dissipation Factor; Qmin.: Q-Factor [1]; RISO: Insulation Resistance; L: Length; W: Width; H: Height
Size 0805
Technical Data:
VR DF RISO L W H
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342007004 15 pF ±5% 250 NP0 Class I – 700 10 0.6
885342007006 47 pF ±5% 500 NP0 Class I – 1000 10 0.6
885342207001 100 pF ±10% 200 X7R Class II 2.5 – 10 0.8
885342207015 100 pF ±10% 1000 X7R Class II 2.5 – 10 1.25
885342007001 220 pF ±5% 200 NP0 Class I – 1000 10 1.25
885342007002 330 pF ±5% 200 NP0 Class I – 1000 10 1.25
885342207002 470 pF ±10% 200 X7R Class II 2.5 – 10 0.8
885342207012 470 pF ±10% 500 X7R Class II 2.5 – 10 0.8
885342007003 1 nF ±5% 200 NP0 Class I – 1000 10 2 1.25 1.25
885342207008 1 nF ±10% 250 X7R Class II 2.5 – 10 0.8
885342207013 1 nF ±10% 500 X7R Class II 2.5 – 10 0.8
885342007005 2.2 nF ±5% 250 NP0 Class I – 1000 10 1.25
885342207016 2.2 nF ±10% 1000 X7R Class II 2.5 – 10 1.25
885342207009 4.7 nF ±10% 250 X7R Class II 2.5 – 10 0.8
885342207005 10 nF ±10% 200 X7R Class II 2.5 – 10 1.25
885342207014 10 nF ±10% 500 X7R Class II 2.5 – 10 1.25
885342207011 22 nF ±10% 250 X7R Class II 2.5 – 4.545 1.25
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; DF: Dissipation Factor; Qmin.: Q-Factor [1]; RISO: Insulation Resistance; L: Length; W: Width; H: Height

Size 1206
Technical Data:
VR DF RISO L W H
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342008001 47 pF ±5 % 500 NP0 Class I – 1000 10 0.8
885342008004 100 pF ±5 % 630 NP0 Class I – 1000 10 0.8
885342008009 100 pF ±5 % 1000 NP0 Class I – 1000 10 1.25
885342008011 100 pF ±5 % 2000 NP0 Class I – 1000 10 1.25
885342208022 100 pF ±10 % 2000 X7R Class II 2.5 – 10 1.25
885342008002 220 pF ±5 % 500 NP0 Class I – 1000 10 0.8
885342208005 470 pF ±10 % 500 X7R Class II 2.5 – 10 1.25
885342208023 470 pF ±10 % 2000 X7R Class II 2.5 – 10 1.25
885342008005 1 nF ±5 % 630 NP0 Class I – 1000 10 1.6
885342208024 1 nF ±10 % 2000 X7R Class II 2.5 – 10 3.2 1.6 1.6
885342008007 2.2 nF ±5 % 630 NP0 Class I – 1000 10 1.6
885342208019 2.2 nF ±10 % 1000 X7R Class II 2.5 – 10 1.25
885342208008 4.7 nF ±10 % 500 X7R Class II 2.5 – 10 1.25
885342208020 4.7 nF ±10 % 1000 X7R Class II 2.5 – 10 1.25
885342208012 10 nF ±10 % 630 X7R Class II 2.5 – 10 1.25
885342208021 10 nF ±10 % 1000 X7R Class II 2.5 – 10 1.25
885342208014 22 nF ±10 % 630 X7R Class II 2.5 – 4.545 1.6
885342208002 100 nF ±10 % 200 X7R Class II 2.5 – 1 1.6
885342208004 100 nF ±10 % 250 X7R Class II 2.5 – 1 1.6
C: Capacitance; Tol. C: Capacitance (Tolerance); VR: Rated Voltage; DF: Dissipation Factor; Qmin.: Q-Factor; RISO: Insulation Resistance; L: Length; W: Width; H: Height
Size 1210
Technical Data:
VR DF RISO L W H
Capacitors
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342009004 10 pF ±5 % 2000 NP0 Class I – 600 10 0.95
885342009002 22 pF ±5 % 1000 NP0 Class I – 840 10 0.95
885342209008 220 pF ±10 % 2000 X7R Class II 2.5 – 10 1.25
885342009003 1 nF ±5 % 1000 NP0 Class I – 1000 10 1.6
885342209009 1 nF ±10 % 2000 X7R Class II 2.5 – 10 1.25
3.2 2.5
885342009001 4.7 nF ±5 % 200 NP0 Class I – 1000 10 1.6
885342209007 22 nF ±10 % 1000 X7R Class II 2.5 – 4.55 1.6
885342209004 33 nF ±10 % 630 X7R Class II 2.5 – 3.03 1.6
885342209002 100 nF ±10 % 200 X7R Class II 2.5 – 1 1.6
885342209003 220 nF ±10 % 250 X7R Class II 2.5 – 0.455 2.5

WCAP-CSMH
MLCCs – Mid and High Voltage
Size 1808
Technical Data:
VR DF RISO L W H
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342010001 10 pF ±5 % 3000 NP0 Class I – 600 1.25
885342010003 100 pF ±5 % 3000 NP0 Class I – 1000 2
885342210003 470 pF ±10 % 3000 X7R Class II 2.5 – 10 4.5 2.03 2
885342210004 1 nF ±10 % 3000 X7R Class II 2.5 – 2
885342210002 2.2 nF ±10 % 2000 X7R Class II 2.5 – 2
Size 1812
Technical Data:
VR DF RISO L W H
(VDC) (%) (GΩ) (mm) (mm) (mm)
885342011002 100 pF ±5% 1000 NP0 Class I – 1000 10 1.25
885342211009 1 nF ±10% 3000 X7R Class II 2.5 – 10 2
885342011003 1.5 nF ±5% 1000 NP0 Class I – 1000 10 2
885342211010 2.2 nF ±10% 3000 X7R Class II 2.5 – 10 2.5
885342211008 4.7 nF ±10% 2000 X7R Class II 2.5 – 10 2
4.5 3.2
885342211004 10 nF ±10% 500 X7R Class II 2.5 – 10 1.25
885342211002 100 nF ±10% 200 X7R Class II 2.5 – 1 1.25
885342211005 100 nF ±10% 500 X7R Class II 2.5 – 1 2
885342211006 100 nF ±10% 630 X7R Class II 2.5 – 1 2
885342211003 470 nF ±10% 250 X7R Class II 2.5 – 0.213 2

Design Kits

WCAP-AI3H; Aluminum Electrolytic Capacitors; Snap-In – Low Profile – 3000 h @ 105 °C 861142
WCAP-AI3H; Aluminum Electrolytic Capacitors; Snap-In – Slim Line – 3000 h @ 105 °C 861141
WCAP-AIE8; Aluminum Electrolytic Capacitors; Snap-In – Slim Line – 3000 h @85 °C 861221
WCAP-AIG5; Aluminum Electrolytic Capacitors; Snap-In – Slim Line – 2000 h @105 °C 861021
WCAP-AIG8; Aluminum Electrolytic Capacitors; Snap-In – Low Profile – 2000 h @ 85 °C 861012
WCAP-AIG8; Aluminum Electrolytic Capacitors; Snap-In – Slim Line – 2000 h @ 85 °C 861011
WCAP-AS5H; Aluminum Electrolytic Capacitors; SMT V-Chip – 5000 h @ 105 °C 865230
WCAP-ASLI; Aluminum Electrolytic Capacitors; SMT V-Chip – 2000 h @ 105 °C 865080
WCAP-ASLI; Aluminum Electrolytic Capacitors; SMT V-Chip – 2000 h @ 105 °C 865081
Capacitors
WCAP-ASLL; Aluminum Electrolytic Capacitors; SMT V-Chip – 2000 h to 5000 h @ 105 °C 865060
WCAP-ASLL; Aluminum Electrolytic Capacitors; SMT V-Chip – 2000 h to 5000 h @ 105 °C 865061
WCAP-ASLU; Aluminum Electrolytic Capacitors; SMT V-Chip – 1000 h @ 85 °C 865090
WCAP-ASNP; Aluminum Electrolytic Capacitors; SMT V-Chip – 2000 h @ 85 °C 865250
WCAP-AT1H; Aluminum Electrolytic Capacitors; Radial THT – 5000 h up to 10000 h @ 105 °C 860240
WCAP-AT1H; Aluminum Electrolytic Capacitors; Radial THT – 5000 h up to 10000 h @ 105 °C 860241
WCAP-ATET; Aluminum Electrolytic Capacitors; Radial THT – 1000 h up to 2000 h @ 125 °C 860130
WCAP-ATG5; Aluminum Electrolytic Capacitors; Radial THT – 2000 h @ 105 °C 860020
WCAP-ATLI; Aluminum Electrolytic Capacitors; Radial THT – 2000 h up to 5000 h @ 105 °C 860082
WCAP-ATLL; Aluminum Electrolytic Capacitors; Radial THT – 3000 h up to 7000 h @ 105 °C 860160
WCAP-ATLL; Aluminum Electrolytic Capacitors; Radial THT – 4000 h up to 7000 h @ 105 °C 860161
WCAP-ATUL; Aluminum Electrolytic Capacitors; Radial THT – 5000 h up to 10000 h @ 105 °C 860040

Design Kits

WCAP-PSHP; Aluminum Polymer Capacitors; SMT V-Chip – 2000 h @ 105 °C 875115
WCAP-PSLC; Aluminum Polymer Capacitors; SMT V-Chip – 2000 h @ 105 °C 875075
WCAP-PSLP; Aluminum Polymer Capacitors; SMT V-Chip – 2000 h @ 105 °C 875105
WCAP-PT5H; Aluminum Polymer Capacitors; Radial THT – 5000 h @ 105 °C 870235
WCAP-PTG5; Aluminum Polymer Capacitors; Radial THT – 2000 h @ 105 °C 870025
WCAP-PTHR; Aluminum Polymer Capacitors; Radial THT – 2000 h @ 105 °C 870055
WCAP-PTHT; Aluminum Polymer Capacitors; Radial THT – 2000 h @ 125 °C 870135
MLCC
WCAP-CSGP; MLCC 0402, General Purpose 885050
WCAP-CSGP; MLCC 1206, 1210, 1812, General Purpose 885080
WCAP-CSGP; MLCC 100 V, General Purpose 885090
WCAP-CSMH; MLCC 200 V / 250 V / 500 V / 630 V, Mid and High Voltage 885341
WCAP-CSMH; MLCC 1 kV / 2 kV / 3 kV, Mid and High Voltage 885342
WCAP-CSRF; MLCC High Frequency 885390
WCAP-CSST; MLCC Soft Termination 885380
DC Film Capacitors
WCAP-FTBE; General Purpose, MKT DC Film, 10 % 890020
WCAP-FTBP; General Purpose, MKP DC Film, 5 % 890010
Safety Capacitors
WCAP-FTX2; MKP Film Capacitors X2 275 VAC 890324
WCAP-FTXX; MKP Film Capacitors X2 310 VAC 890334

1 PASSIVE COMPONENTS  Capacitors  Additional Information
Product Portfolio
Portfolio Overview Capacitors
10 kV
Film
Capacitors
1 kV
Aluminum
MLCCs Electrolytic
Voltage [V]
Capacitors
100 V
NEW
EXTENDED
NEW
EXTENDED
10 V
NEW
Supercapacitors
Aluminum NEW
Polymer
1V Capacitors
1 pF 1 nF 1 µF 1 mF 1F 1 kF
Capacitance [C]
Supercapacitors (Electric Double Layer Capacitors – EDLCs)

Product series: WCAP-STSC
Supercapacitors
Power Density (kW/kg)
Capacitors
close the gap between
Capacitors
capacitors and batteries
Supercapacitors
Batteries
Supercapacitors have:
Higher power density than batteries
Higher energy density than conventional Energy Density (Wh/kg)
capacitors
Features Applications
Large charge storing capacitance
Ultra low equivalent series resistance (ESR)
Provide a fast charging and discharging within seconds
or minutes
Cycle life is about 500 times and power output about
10 times higher compared to usual batteries Storage devices for Hybrid application
Depending on the field of applications – power-offline periods with battery
possible replacement for batteries
Easy to use: No battery charging circuit is required to
prevent overcharging

Product Portfolio
MLCCs – High Frequency Applications

Product series: WCAP-CSRF
Designed for high frequency

applications
NP0 ceramic for high temperature

stability, low equivalent series
resistance and high Q characteristics
Inner electrode consists of an Power amplifier Telecommunication
exceeding conductive material
MLCCs – Soft Termination Applications

Product series: WCAP-CSST
etter absorption of
B
mechanical stress
Terminations with an additional

conductive polymer layer
Minimizes the risk of internal cracks
More stable and robust performance Power supply Lighting applications
during PCB handling as well as in
the final application
Inner structure
Sn – Plating
Ni – Plating
Conductive Polymer
Cu – Base Layer
Board Flex up to 5 mm
2 mm
5 mm
General Purpose MLCCs Soft Termination MLCCs

WCAP-ASLU with slim diameter of 3 mm Applications
Low leakage current series of
V-Chip SMT Aluminum Electrolytic
Capacitors
Products with a diameter of 3 mm
are now available
DC/DC converter
H-Chip Aluminum Polymer Capacitors

Product series: WCAP-PHGP, Applications
WCAP-PHSE, WCAP-PHLE
Input
and output capacitors
Suitable alternative for tantalum for SMPS
capacitors & MLCCs Noise suppression
Communication infrastructures
Aluminum Polymer technology Servers
Low profile surface mount (SMT) Mainboards
package
Extremely low ESR and ESL
Servers
Suitable for high ripple currents
Inner Structure
Capacitors
Terminal
Anode Element – Aluminum Plate
Dielectric Layer – Aluminum Oxid Cathode Element – Silver Paste
Learn more about our H-Chip

Aluminum Polymer Capacitor:
www.we-online.com/h-chip

Product Portfolio
Impedance vs. Frequency Capacitance Change vs. DC-Bias Voltage
Capacitance Change in % [ΔC / C]

-20 Possible
Capacitance Change
for MLCCs
Impedance
-40
with Class 2 Ceramic
-60
-80
(typical sample curve) (typical sample curve)

-100
Frequency DC-Bias Voltage in %
Polymer H-Chip MLCCs (Class 2) without DC-Bias MLCCs (Class 2) with DC-Bias Polymer H-Chip MLCCs (Class 2)
Capacitance Change vs. Temperature
20
15
Capacitance Change in % [ΔC / C]
10
max. allowed
5 typical
capacitance
capacitance
change over
change over
0 temperature
temperature
for MLCCs like
for Polymer
-5 X7R or X5R
H-Chips
ceramic
-10
-15
(typical sample curve)

-20
-55 -35 -15 5 25 45 65 85 105
Temperature in °C
Polymer H-Chip MLCCs (Class 2)
Save Space on your PCB

24 x MLCCs 1 x H-Chip Aluminum
P/N: 885012107006 Polymer Capacitor
with 47 µF P/N: 875015119006
24 x 47 µF = 1128 µF with 220 µF
VR = 6.3 VDC 1 x 220 µF = 220 µF
Size 0805 è 2 x 1.25 mm VR = 6.3 VDC
C @ 6 VDC = 216 µF Size 2917 è 7.3 x 4.3 mm
due to DC-Bias C @ 6 VDC = 220 µF
A = 255 mm² A = 44 mm²

Expected Life Calculation
Expected Lifetime
of Electrolytic Calculation of
Capacitors
TheThe
expected
expectedlifetime
life ofofa specific
a specificcapacitor
capacitorcan
canbebecalculated
calculatedbased
basedononthethe
given
given load life, maximum
endurance, maximum temperature
temperature and
and temperature
temperature of of application:
the application: Lx = Expected lifetime of component
Aluminum Polymer
T Capacitors:
– TA
LNom = Endurance of component (see datasheet)
Aluminum Polymermax
Capacitors Radial THT & V-Chip SMT:
Lx = LNom · 10 T Tmax
20
– TA
Tmax = Maximum allowed
LxL=x =LNom
LNom· 10
* 10 20
max – T20
A
temperature of component
TA = Component ambient
temperature within application
Aluminum Electrolytic Capacitors & Aluminum Polymer Capacitors H-Chip SMT:
Aluminum Electrolytic
Tmax – TA Capacitors:
Lx = LNom · 2T T10max – TA
LxL=x =LNom
LNom· 2* 210
max – T10
A
Aluminum Polymer Capacitors Aluminum Electrolytic Capacitors &

Radial THT & V-Chip SMT Aluminum Polymer Capacitors H-Chip SMT
Temperature (°C) Expected Lifetime (h) Expected Lifetime (h)
125 2.000 – – – – – –
115 6.325 – – – – – –
105 20.000 2.000 10.000 5.000 2.000 – –
Examples
95 of Expected
63.246 Life Calculation:
6.325 20.000 10.000 4.000 – –
85 200.000 20.000 40.000 20.000 8.000 5.000 2.000
75 Aluminum
632.455 Polymer
63.246 Capacitor80.000 40.000Aluminum 16.000
Electrolytic Capacitor
10.000 4.000
Application
65 Temperature (C°)2.000.000 Expected Life (h)
200.000 160.000 80.000 Expected
32.000 Life (h) 20.000 8.000
125
55 6.324.555 2,000 632.455 -
320.000 -
160.000 -
64.000 -
40.000 -
16.000
115 6,325 - - - - -
45 20.000.000 2.000.000 640.000 320.000 128.000 80.000 32.000
105 20,000 2,000 5,000 2,000 - -
35 95 63.245.553 63,246 6.324.555 6,325 1.280.000 10,000 640.000 4,000 256.000 -1.600.00 -64.000
Capacitors
85 200,000 20,000 20,000 8,000 5,000 2,000
75 630,455 63,246 40,000 16,000 10,000 4,000
Expected Lifetime
65
vs. Temperature
2,000,000 200,000 80,000 32,000 20,000 8,000
55 6,324,555 632,455 160,000 64,000 40,000 16,000
45 20,000,000 2,000,000 320,000 128,000 80,000 32,000
The first line represents typical datasheet lifetime values as an example for load life with max. temperature for different capacitors.
400.000
350.000 Radial THT & V-Chip SMT
300.000
125 °C / 2000 h
105 °C / 2000 h
250.000
Expected Lifetime [h]
200.000 Aluminum Electrolytic

Capacitors & Aluminum
150.000
Polymer Capacitors –
100.000
H-Chip SMT
50.000 105 °C / 10000 h
105 °C / 5000 h
0
125 115 95 85 75 65 55 45 35 25 105 °C / 2000 h
Temperature [°C] 85 °C / 5000 h
85 °C / 2000 h

40 Würth Elektronik eiCap® 11/16
MLCCs – Multilayer
Ceramic Chip Capacitors
Characteristics of Class 1 and Class 2 Ceramic Capacitors
Class 1 Ceramic Capacitors (i.e. NP0 = C0G) are characterized by a small permittivity εr, thus they have smaller capacitances.
Their dependencies of temperature and voltage are linear and their aging is minimal.
Class 2 Ceramic Capacitors (i.e. X7R, X5R, Y5V) own a higher permittivity εr. That is why they provide higher capacitances.
Their dependencies of temperature and voltage are non-linear and they show aging behavior.
Functions and Applications Class 1 and Class 2 Ceramic Capacitors

Class 1 Ceramic Capacitors provide high stability and low losses for example in a resonant circuit, filter, temperature compensation and
coupling applications.
Class 2 Ceramic Capacitors provide high volumetric capacitance for example in smoothing, coupling, decoupling and by-pass applications.
Typical Capacitance Change vs. Temperature
40 Temperature Characteristics
Ceramic Operating Temperature
20
NP0 -55 °C to + 125 °C
Capacitance Change in % [∆C/C]
0 X7R -55 °C to + 125 °C

X5R -55 °C to + 85 °C
–20
Y5V -30 °C to + 85 °C
–40
–60
(typical sample curve)

–80
–55 –40 –25 –10 5 20 35 50 65 80 95 110 125
Temperature in °C
NP0 X7R X5R Y5V
Typical Capacitance Change vs. DC Voltage* Typical Capacitance Change vs. Time
10 0
0 –2
–10
–4
–20
–6
–30
–8
–40
–10
–50
–12
–60
–14
–70
–80 –16
–90 –18
(typical sample curve) (typical sample curve)
–100 –20
0 5 10 15 20 25 30 35 40 1 10 100 1000
DC Voltage in V Operating Time in h
NP0 X7R X5R Y5V NP0 X7R X5R Y5V
*Typical characteristics for ceramic capacitors with a rated DC voltage of 25 V (X5R)

and 50 V (NP0, X7R, Y5V)

Capacitors for Interference Suppression
X1/Y2, X2 MLCCs and X2 Film Capacitors
WCAP-FTX2 and WCAP-FTXX are X2 Film capacitors manufactured as metallized polypropylene (MKP) capacitors. WCAP-CSSA consists of
X1/Y2 and X2 chip monolithic ceramic capacitors created with multilayer technology. All three series are used as filters in power supplies to
suppress interferences.
MLCCs – Ceramic Capacitors Film Capacitors
WCAP-FTX2
Available series: WCAP-CSSA
WCAP-FTXX
Safety class: X1/Y2, X2 X2

Type: SMT 1808, 1812, 2211, 2220 THT boxed
Rated Voltage: 250 VAC 275 VAC, 310 VAC
Dielectric: NP0, X7R Polypropylene (PP)
Capacitance Range: 33 pF – 4.7 nF 5.6 nF – 6.8 µF
ENEC 10 by VDE, file number: 40038405
TUV (EN 60384-14), file numbers: R 50268363 & R 50376984
Approvals: cULus, file number: E345659
cULus, file numbers: E331896 & E345659
CQC, file number: 13001104051
Application of X and Y Capacitors: Function of X and Y Capacitors:

To filter possible spikes X capacitors (Cx) are used in parallel to the Voltage curve before filtering: Voltage curve after filtering:
voltage source between the power lines whereas Y capacitors (Cy)  ripple on AC signal  grading of ripple on AC signal
are set between power line and ground.
Capacitors
V V
N
Line Cx Application
L
t t
CY CY
Classification according to IEC 60384-14: 2013

Safety Peak impulse Peak impulse voltage applied Safety Type of bridged Range of Peak impulse voltage applied
Application
Class voltage in use before endurance test Class insulation rated voltages before endurance test
4 kV Double or
> 2.5 kV High pulse UP = Y1 ≤ 500 V 8 kV
X1 4 kV (C≤1 µF), CN (C>1 µF) reinforced
≤ 4 kV application 5 kV
10–6 F UP =
Basic or ≥ 150 V
2.5 kV Y2 5 kV (C≤1 µF), CN (C>1 µF)
UP = supplemental ≤ 500 V
General 10–6 F
X2 ≤ 2.5 kV 2.5 kV (C≤1 µF), CN (C>1 µF)
Purpose
10–6 F

Supercapacitors
(Electric Double Layer Capacitors – EDLCs)
How Supercapacitors can help you with Energy Storage
Design-In Steps Discharging Mode
Constant Resistance Constant Current Constant Power

1st Step
Identify the mode of V0 V0 V0
operation for the discharge

Voltage
Voltage
Voltage
process. V V
V
t0 t t0 t t0 t
Time Time
Time
2nd Step Supercapacitor (EDLC)

Calculate the necessary Main device parameters are rated
capacitance depending on voltage and capacitance
the desired operation EDLCs are low voltage devices
parameters such as operation No constant voltage source
time, output power and
output current.
Charging Mode
3rd Step Constant Voltage Constant Current

Identify the suitable
charging process and V1 V
V
calculate the charging time
Voltage
Voltage
depending on the charging

V0
current.
t0 t t0 t
Time
Time
This page is only a visualization of the Design-In

steps. Please use our Support Note for a more detailed
Design In process: www.we-online.com/sn009

Compare and Select Capacitors
in REDEXPERT
Get access to charts like ripple
current vs temperature, which are
only available in REDEXPERT!
Filterfor electrical and mechanical parameters
Download certificates (safety caps)
Get chart data out of the lab
More data available than in any data sheet
Read out chart values in the product table
Move chart marker to any x-axis value and
read out the values in the product table (ripple
current @ 50 °C in the shown chart)
Capacitors
Try it out:
www.we-online.com/redexpert-capacitors

Resistors
Products 140
Design Kit 147
138
1 PASSIVE COMPONENTS  Resistors
Product Overview

WRIS-PSMB
Metal Plate Resistors Thick Film Resistors
WRIS-PSMB WRIS-KSKE
Enhanced Current Sensing General Purpose Current Sensing
R: 5 mΩ – 10 mΩ R: 50 mΩ – 10 Ω
RTol: ±1 % RTol: ±1 %
P: 0.33 W up to 1 W P: 0.125 W up to 1 W
TCR: ±100 ppm/°C TCR: ±100 / +200 / +250 / +300
Temp.: -55 °C up to +155 °C ppm/°C
Temp.: -55 °C up to +155 °C
WRIS-PSMC
High Power Current Sensing WRIS-KWKB
R: 2 mΩ – 10 mΩ High Power
RTol: ±1 % / ± 5 % R: 2.2 Ω – 18 kΩ
P: 2W RTol: ±1 % / ±5 %
TCR: ±100 ppm/°C P: 0.75 W up to 2 W
Temp.: -55 °C up to +155 °C TCR: ±200 ppm/°C
Temp.: -55 °C up to +155 °C
WRIS-PWMC
High Power Current Sensing WRIS-KWKH
R: 1 mΩ – 5 mΩ High Power Current Sensing
RTol: ±1% R: 100 mΩ – 620 mΩ
P: 3 W up to 6 W RTol: ±1 % / ±5 %
TCR: ±100 ppm/°C P: 1W
Temp.: -55 °C up to +170 °C TCR: +200 / +250 / +350 ppm/°C
Temp.: -55 °C up to +155 °C
Resistors
All resistors at a glance:

www.we-online.com/resistors

1 PASSIVE COMPONENTS  Resistors  Products
WRIS-PSMB
Metal Plate Resistors
■ Product series for enhanced current sensing up ■ Motor control
to 1 W ■ Battery pack
■ Mounting style: SMT-Chip (standard terminal) ■ DC/DC converter
■ Resistance range: 5 mΩ – 10 mΩ ■ AC adapter
■ Resistance tolerance: ±1 %
■ Rated Power: 0.33 W – 1 W
■ TCR: ±100 ppm/°C
■ Sizes: 0603 / 0805 / 2512
Extended current sensing www.we-online.com/wris-psmb
Size 0603
Technical Data:
R PRated TCR IR L W H
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
580060716001 5 8.12 0.35
±1 % 0.33 100 1.6 0.8
580060716002 10 5.74 0.3
R: Resistance; Tol. R: Resistance Tolerance; PRated: Rated Power; TCR: Temperature Coefficient of Resistance (max.); IR: Rated Current; L: Length; W: Width; H: Height
Size 0805
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
580060720003 5 10 0.35
±1 % 0.5 100 2 1.25
580060720008 10 7.07 0.22
Size 2512
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/ °C) (A) (mm) (mm) (mm)
580060763005 7 ±1% 1 100 12 6.3 3.1 0.35

WRIS-PSMC
■ Product series for high power current sensing up ■ Ignition coil & ingiter
to 2 W ■ Motor control
■ Mounting style: SMT chip (standard terminal) ■ Inverter
■ Resistance range: 2 mΩ – 10 mΩ ■ Battery pack
■ Resistance tolerance: ±1 %; ±5 %
■ Rated power: 2 W
■ TCR: ±100 ppm/°C
■ Operating temperature: -55°C up to +155°C
■ Size: 2512
www.we-online.com/wris-psmc
High power current sensing
Size 2512
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
580070763001 2 ±1 % 31.62 0.58
580070763021 2 ±5 % 31.62 0.58
2 100 6.3 3.1
580070763005 5 ±1 % 20 0.51
580070763010 10 ±1 % 14.14 0.35
Resistors

WRIS-PWMC
■ Product series for high power current sensing up ■ Ignition coil & igniter
to 6 W ■ Inverter
■ High operating temperature
■ Mounting style: SMT chip (wide terminal)
■ Resistance range: 1 mΩ – 5 mΩ
■ Resistance tolerance: ± 1 %
■ Rated power: 3 W – 6 W
■ TCR: ±100 ppm/°C
■ Sizes: 1225 / 2043
www.we-online.com/wris-pwmc
High power current sensing
Size 1225
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
581070763001 1 54.77
±1 % 3 100 3.2 6.3 0.2
581070763005 5 24.49
Size 2043
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
581070768001 1 77.46
±1 % 6 100 5 11 0.2
581070768005 5 34.6

WRIS-KSKE
Thick Film Resistors
■ General purpose current sensing product series ■ DC/DC converter
■ Mounting style: SMT chip (standard terminal) ■ Camera; night vision device
■ Resistance range: 50 mΩ – 10 Ω ■ Battery management for mobile phones
■ Resistance tolerance: ±1 % ■ Electric motor control
■ Rated power: 0.125 W – 1 W
■ TCR: ±100; +200; +250; +300 ppm/°C
■ Sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512
General purpose current sensing www.we-online.com/wris-kske
Size 0402
Technical Data:
PRated TCR IR L W H
Order Code R Tol. R
(W) (ppm/°C) (A) (mm) (mm) (mm)
560050310002 150 mΩ 300 0.91
560050310010 500 mΩ ±1 % 0.125 200 0.5 1 0.5 0.35
560050310009 10 Ω 100 0.11
Size 0603
Technical Data:
PRated TCR IR L W H
Order Code R Tol. R
(W) (ppm/°C) (A) (mm) (mm) (mm)
560050316001 100 mΩ 250 1.58
560050316011 500 mΩ ±1 % 0.25 100 0.7 1.6 0.8 0.45
560050316012 10 Ω 100 0.15
Resistors
Size 0805
Technical Data:
PRated TCR IR L W H
Order Code R Tol. R
(W) (ppm/°C) (A) (mm) (mm) (mm)
560050320001 100 mΩ 250 1.81
560050320003 270 mΩ 200 1.1
±1 % 0.33 2 1.25 0.6
560050320011 1Ω 100 0.57
560050320007 2.2 Ω 100 0.38

WRIS-KSKE
Size 1206
Technical Data:
PRated TCR IR L W H
Order Code R Tol. R
(W) (ppm/°C) (A) (mm) (mm) (mm)
560050332001 50 mΩ 250 3.16
560050332013 500 mΩ ±1 % 0.5 100 1 3.1 1.6 0.6
560050332011 3.3 Ω 100 0.38
Size 2010
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
560050350011 200 1.93
±1 % 0.75 200 5 2.5 0.6
560050350012 390 1.38
Size 2512
Technical Data:
PRated TCR IR L W H
Order Code R Tol. R
(W) (ppm/°C) (A) (mm) (mm) (mm)
560050363011 500 mΩ 1.41
±1 % 1 100 6.3 3.2 0.6
560050363012 3.3 Ω 0.55

WRIS-KWKB
■ Product series for high power up to 2 W ■ Electric motor
■ Mounting style: SMT chip (wide terminal) ■ Camera
■ Resistance range: 2.2 Ω – 18 kΩ ■ Lighting control
■ Resistance tolerance: ±1 %; ±5 % ■ TV
■ Rated power: 0.75 W – 2 W
■ TCR: ±200 ppm/°C
■ Sizes: 0612 / 1020 / 1225
High power www.we-online.com/wris-kwkb
Size 0612
Technical Data:
PRated TCR VR L W H
Order Code R Tol. R
(W) (ppm/°C) (V) (mm) (mm) (mm)
561020132004 47 Ω ±5 % 5.9
561020132008 100 Ω ±1 % 8.7
561020132009 100 Ω ±5 % 8.7
561020132010 110 Ω ±5 % 9.1
561020132011 120 Ω ±1 % 9.5
561020132014 240 Ω ±1 % 13.4
561020132023 470 Ω ±5 % 0.75 200 18.8 1.6 3.2 0.55
561020132030 1.2 kΩ ±1 % 30
561020132031 1.5 kΩ ±1 % 33.5
561020132032 1.8 kΩ ±1 % 36.7
561020132034 2.2 kΩ ±1 % 40.6
561020132037 2.7 kΩ ±1 % 45
561020132059 18 kΩ ±1 % 116.2
R: Resistance; Tol. R: Resistance Tolerance; PRated: Rated Power; TCR: Temperature Coefficient of Resistance (max.); VR: Rated Voltage; L: Length; W: Width; H: Height
Size 1020
Technical Data: Resistors
R PRated TCR VR L W H
Order Code Tol. R
(Ω) (W) (ppm/°C) (V) (mm) (mm) (mm)
561020150010 270 ±1 % 1 200 16.4 2.5 5 0.55
Size 1225
Technical Data:
R PRated TCR VR L W H
Order Code Tol. R
(Ω) (W) (ppm/°C) (V) (mm) (mm) (mm)
561020163016 2.2 ±1 % 2.1
561020163017 5.1 ±1 % 3.2
561020163018 10 ±1 % 2 200 4.5 3.2 6.3 0.55
561020163011 270 ±1 % 23.2
561020163012 430 ±5 % 29.3

WRIS-KWKH
■ Product series for high power current sensing up ■ DC/DC converter
to 1 W ■ Camera
■ Mounting style: SMT chip (wide terminal) ■ Night vision device
■ Resistance range: 100 mΩ – 620 mΩ ■ TV
■ Resistance tolerance: ±1 % / ±5 % ■ Lighting
■ Rated power: 1 W
■ TCR: +200; +250; +350 ppm/°C
■ Sizes: 0612 / 1020
High power current sensing www.we-online.com/wris-kwkh
Size 0612
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
561070332051 100 ±1 % 350 3.2
561070332055 150 ±1 % 350 2.6
561070332057 180 ±1 % 350 2.4
561070332092 240 ±5 % 250 2
561070332071 330 ±1 % 250 1.7
561070332096 330 ±5 % 1 250 1.7 1.6 3.2 0.55
561070332076 470 ±1 % 250 1.5
561070332078 510 ±1 % 200 1.4
561070332079 560 ±1 % 200 1.3
561070332080 600 ±1 % 200 1.3
561070332081 620 ±1 % 200 1.3
Size 1020
Technical Data:
Order Code Tol. R
(mΩ) (W) (ppm/°C) (A) (mm) (mm) (mm)
561070350055 150 350 2.58
561070350077 500 ±1 % 1 200 1.41 2.5 5 0.55
561070350078 510 200 1.4

1 PASSIVE COMPONENTS  Resistors
Design Kits

Resistors
WRIS-KWKB / WRIS-KSKE / WRIS-KWKH / WRIS-PSMB / WRIS-PSMC;
560000
Current Sensing Resisitors; SMT
Resistors

1 PASSIVE COMPONENTS  Resistors  Additional Information
Current Sense Resistors
Product Portfolio
How does Current Sensing work?
Using a resistor within the circuit of the application to make the
current measurable (called: shunt)
The current through such a resistor generates a proportional
voltage drop according to Ohm’s Law:
VRshunt
Imeas =
Rshunt
Very low resistance values are used to generate a low
voltage drop up to a few hundred mV
In case of low currents, very precise resistance values and an
amplifying circuit have to be used to get stable measurements, Imeas
because of the very small voltage drop
VRshunt Rshunt V Voltage
Example Calculation for a shunt*
Given: Searched:
I0 = 10 A Shunt, which is required to measure 50 mV
We want to measure a voltage drop of 50 mV Power loss, which will be caused by the shunt
Formulas:
U
Shunt R = Power Loss P = U · I = I² · R
I
Calculation:
Shunt, which is required: U 50 mV
RShunt = = = 0.005 Ω = 5 mΩ
I 10 A
Power loss of the shunt: PLoss = I² · R = 10² A · 5 mΩ = 0.5 W
*Calculation is only an example, for application specific calculation or detailed support, please contact our technical support.

Where do I use Current
Sense Resistors?
Current Control
Used
to detect and control the current on each
phase and time and at any time
To arrange a feedback for the control circuit
Applications
Motor control
DC/DC converter
Power supply inverter DC/DC converter Power supply
Overcurrent Sensing & Detection

Overcurrent within the circuit can cause malfunctions and failures Applications
Measured current is higher than the max. defined current Motor control
 the system will detect a failure state Battery control
Power supply protection
Current
Sensing
Rshunt
Imeas
Battery control Power supply protection
Current Management
Especially for systems using secondary batteries Applications
Monitoring current or voltage level of a battery, to know the Electric vehicles
Resistors
remaining power level and to keep the system properly operating Mobile devices
Real-time measurement to monitor the power level Computer devices
and charging status
Current
Rshunt
Sensing
Load Battery
Electric vehicles Mobile devices

1 PASSIVE COMPONENTS  Resistors  Additional Information
Types of Resistors and Selection
Which Type of Resistors do I need?

Insulation Coating Insulation Coating
Resistive Layer
Termination Termination
Inner Electrode Protective Layer
Resistive Element Laser trimming Base Plate (Ceramic)

(Metal Alloy)
Current detection of a few tens of amperes Current detection of small current levels
Ultra low resistance values (up to 10 mΩ) Low to mid level resistance values (a few hundred mΩ up to a few Ω)
Features Features
Superior abilities in case of power, temperature characteristics, For applications with general purpose and less precise low
linearity, accuracy and current-noise suppression level current measurements
Stability and robustness make them suitable for current High cost efficiency, but less accurate as Metal Plate Resistors
sensing applications
Construction
Construction Consists of a ceramic body as basis
Consists of a metal plate as core material On one site of the ceramic body is a printed metal layer
Metal plate is covered with an isolated layer Metal layer is trimmed down by laser to the desired
Termination consists from the inside out of a copper, resistance value
nickel and tin layer Part is coated with an isolated layer
Available Product Series Available Product Series

Standard Terminal: Standard Terminal:
– WRIS-PSMB – Enhanced Current Sensing (max. 0.5 W – WRIS-KSKE – General Purpose Current Sensing (max. 1 W)
– WRIS-PSMC – High Power Current Sensing (max. 2 W) Wide Terminal:
Wide Terminal: – WRIS-KWKH – High Power Current Sensing (max. 1 W)
– WRIS-PWMC – High Power Current Sensing (max. 6 W) – WRIS-KWKB – High Power (max. 2 W)
Derating curves
100 WRIS-PSMB, WRIS-PSMC, WRIS-KSKE, WRIS-KWKB, WRIS-KWKH

rated dissipation [%]
WRIS-PWMC
Percentage of the
Area of
recommended operation
0
-55 70 155 170
Ambient temperature [°C]

2 OPTOELECTRONICS
Optoelectronics
Products 156
Design Kits 166
151
2 OPTOELECTRONICS
Product Overview

WL-SMCC
Visible LEDs
Chip LEDs Chip LEDs Chip LED Side View

WL-SMCC SMD Mono-color Chip Extended WL-SBCW SMD Bi-color Chip LED WL-SMSW SMD Mono-color Side
LED Compact Waterclear view Waterclear
Size: 0402, 0603 Size: 0606, 1210 Size: 0603, 3014, 1204
λDOM typ: 470 – 630 nm λDOM typ: 520 – 630 nm λDOM typ: 470 – 624 nm
IV typ: 50-800 mcd IV typ: 30 – 560 mcd IV typ: 50 – 600 mcd
VF typ: 2.0 – 3.2 V VF typ: 2 – 3.2 V VF typ: 2 – 3.4 V
Emitting color: Super Red, Red, Amber, Emitting color: Super Red/Bright Green, Emitting color: Red, Yellow, Bright
Yellow, Bright Green, Green, Blue Yellow/Bright Green, Red, Green Green, Green, Blue
WL-SBCC SMD Bi-Color Chip LED WL-SFCW SMD Full-color Chip LED WL-SBSW SMD Bi-color Side view
Compact Waterclear Waterclear
Size: 0603 Size: 0606, 0805, 1206, 1210 Size: 1204
λDOM typ: 570 – 625 nm λDOM typ: 470 – 624 nm λDOM typ: 525 – 624 nm
IV typ: 30 – 60 mcd IV typ: 70 – 360 mcd IV typ: 30 – 160 mcd
VF typ: 2V VF typ: 1.9 – 3.3 V VF typ: 2 – 3.3 V
Emitting color: Red/Bright Green Emitting color: Red, Green, Blue Emitting color: Red/Bright Green,
Red/Green
WL-SFCC SMD Full-color Chip LED WL-SFCD SMD Full-color Chip LED
Compact Diffused WL-SFSW SMD Full-color Side
Size: 0404 Size: 0606, 0805, 1210 view Waterclear
λDOM typ: 470 – 621 nm λDOM typ: 470 – 624 nm Size: 1204
IV typ: 50 – 180 mcd IV typ: 70 – 900 mcd λDOM typ: 465 – 622 nm
VF typ: 2 – 2.8 V VF typ: 2 – 3.3 V IV typ: 140 – 850 mcd
Emitting color: Red, Green, Blue Emitting color: Red, Green, Blue VF typ: 2–3V
Emitting color: Red, Green, Blue
WL-SMCW SMD Mono-color Chip WL-SBCD SMD Bi-color Chip LED
LED Waterclear Diffused
Size: 0603, 0805, 1206 Size: 0606, 0805
λDOM typ: 470-630 nm λDOM typ: 573 – 624 nm
IV typ: 40 – 450 mcd IV typ: 60 – 18 mcd
VF typ: 1.9 – 3.2 V VF typ: 2 – 3.3 V
Emitting color: Super Red, Red, Amber, Emitting color: Red, Super Red, Green,
Yellow, Bright Green, Green, Blue Bright Green, Yellow
WL-SMCD SMD Mono-color Chip

LED Diffused
Size: 0603
λDOM typ: 470 – 630 nm
IV typ: 60 – 430 mcd
VF typ: 2.0 – 3.2 V
Emitting color: Super Red, Red, Yellow,
Bright Green, Green, Blue

Visible LEDs White LEDs
Chip LED Reverse Mount TOP LED TOP LED

WL-SMRW SMD Mono-color Extended WL-SMTW SMD Mono-color TOP Extended WL-SWTP SMD White Top view
Reverse mount Waterclear LED Waterclear PLCC
Size: 1205 (rectangular), Size: 2214, 3020, 2835, 3528, 5050 Size: 3014, 3022, 3030, 5630
1206 (rectangular, cylindrical, dome) λDOM typ: 465 – 636 nm CCT: 2700 – 6000 K
λDOM typ: 470 – 630 nm IV typ: 70 – 3500 mcd ΦV typ: 7 – 39 lm
IV typ: 30 – 2200 mcd VF typ: 2 – 3.2 V VF typ: 2.8 – 3.2 V
VF typ: 2 – 3.3 V Emitting color: Super Red, Red, Amber, Emitting color: Sunrise, Warm White,
Emitting color: Super Red, Red, Amber, Yellow, Bright Green, Green, Blue Moonlight, Daylight, Cool White
Yellow, Bright Green, Green, Blue
Extended WL-SMTD Mono-color TOP LED
High Power Ceramic
WL-SMRD SMD Mono-color Diffused
Reverse mount Diffused Size: 3528 WL-SWTC SMD White Top view
Size: 1205 λDOM typ: 470 – 630 nm Ceramic LED
λDOM typ: 470 – 624 nm IV typ: 4200 – 30000 mcd Size: 3535
IV typ: 40 – 200 mcd VF typ: 2.4 – 3.2 V CCT: 4000 – 6000 K
VF typ: 2 – 3.3 V Emitting color: Super Red, Red, ΦV typ: 121 – 135 lm
Emitting color: Red, Yellow, Bright Yellow,Green, Blue VF typ: 3.2 V
Green, Green, Blue Emitting color: Moonlight, Daylight,
WL-SBTW SMD- Bi-color TOP LED
Extended WL-SBRW SMD Bi-color Reverse Waterclear Cool White
mount Waterclear Size: 3528
Size: 1205 λDOM typ: 470 – 625 nm
λDOM typ: 470 – 624 nm IV typ: 60 – 260 mcd
IV typ: 45 – 285 mcd VF typ: 2 – 3.2 V
VF typ: 2 – 3.3 V Emitting color: Red/Blue, Red/Bright
Emitting color: Red/Green, Red/Bright Green, Yellow/Blue, Yellow/Bright Green
Green, Red/Blue, Yellow/Bright Green
WL-SFTW SMD Full-color TOP LED
WL-SFRW SMD Full-color Reverse Waterclear Ultraviolet LEDs
mount Waterclear Size: 3528 , 5050
Size: 1205, 1206 λDOM typ: 470 – 625 nm High Power Ceramic
λDOM typ: 470 – 624 nm IV typ: 230 – 1.700 mcd
IV typ: 70 – 280 mcd VF typ: 2 – 3.2 V WL-SUMW SMD Ultraviolet
VF typ: 2 – 3.3 V Emitting color: Red, Green, Blue Ceramic Waterclear
Emitting color: Red, Green, Blue Size: 3535
WL-STFD SMD Full-color TOP LED λPeak: 365 – 405 nm
Diffused
THT Round Size: 1616, 2022, 2828, 3535
Ie: 650 – 1100 mW
VF typ: 3.5 V
WL-TMRW THT Mono-color Round
IV typ: 400 – 1900 mcd
Waterclear
VF typ: 2 – 3.2 V
Size: 3 mm (with/without stopper)
Emitting color: Red, Green, Blue
5 mm (with/without stopper)
IV typ: 1500 – 15000 mcd High Power Ceramic
VF typ: 1.9 – 3.4 V
Emitting color: Red, Yellow, Green, Blue WL-SMDC SMD Mono-color
Ceramic LED Waterclear
WL-TMRC THT Mono-color Round Size: 3535
Color λDOM typ: 460 – 625 nm
Size: 3 mm (without stopper) ΦV typ: 25 – 85 lm
5 mm (without stopper) VF typ: 2 – 3.4 V
λDOM typ: 470 – 645 nm Emitting color: Red, Yellow, Green, Blue
Optoelectronics
IV typ: 30 –500 mcd

VF typ: 2 – 3.2 V WL-SMDC Mono-color Ceramic
Emitting color: Red, Super Red, Yellow, LED Waterclear Horticulture
Bright Green, Blue Size: 3535
ΦV typ: Radiant 240 – 600 mW
VF typ: 1.8 – 3.2 V
Emitting color: Far Red, Hyper Red,
Deep Blue

2 OPTOELECTRONICS
Product Overview
Infrared Photodiodes
Infrared Emitter Chip Top View

WL-SDCB SMT Photodiode Chip
Chip LED High Power Ceramic Black
Size: 0805, 1206
WL-SICW SMD Infrared Chip LED WL-SIMW SMD Infrared λPeak: 940 nm
Waterclear Ceramic Waterclear IP typ: 1.8 µA
Size: 0402, 0603, 0805, 1206 Size: 3535 ID max.: 10 nA
λCentroid: 850, 940 nm λCentroid: 850, 940 nm
Ie typ: 0.8 – 2 mW/sr Ie typ: 220 – 350 mW/sr
VF typ: 1.2 – 1.4 V VF typ: 1.9 – 2.2 V Chip Side View
WL-SDSB SMT Photodiode Sideview
Chip LED Side View High Power QFN Black
Size: 1002, 1104
WL-SISW SMD Infrared Sideview NEW WL-SIWQ λPeak: 940 nm
LED Waterclear Size: 2720, 3535, 3737 IP typ: 2.5 µA
Size: 0402, 1002, 1104, 1106, 1206 λCentroid: 845 – 935 nm ID max.: 10 nA
λCentroid: 850, 940 nm Ie typ: 125 – 800 mW/sr
Ie typ: 1 – 11 mW/sr VF typ: 1.8 – 3.2 V
VF typ: 1.2 – 1.6 V THT Round
THT Infrared Round WL-TDRW THT Photodiode Round
Chip LED Reverse Mount Waterclear
WL-TIRW THT Infrared Round Size: 3 mm (without stopper)
WL-SIRW SMD Infrared Reverse Waterclear 5 mm (without stopper)
mount Waterclear Size: 3 mm (without stopper) λPeak: 940 nm
Size: 1206 (dome) 5 mm (without stopper) IP typ: 28 µA
λCentroid: 850, 940 nm λCentroid: 845, 940 nm ID max.: 30 nA
Ie typ: 5 – 20 mW/sr Ie typ: 30 – 85 mW/sr
VF typ: 1.2 – 1.4 V VF typ: 1.3 – 1.5 V WL-TDRB THT Photodiode Round
Black
Size: 3 mm (without stopper)
TOP LED THT Infrared Round Color 5 mm (without stopper)
λPeak: 940 nm
WL-SITW SMD Infrared TOP LED WL-TIRC IP typ: 31 µA
Waterclear Size: 3 mm (without stopper) ID max.: 30 nA
Size: 3528 5 mm (without stopper)
λCentroid: 845, 940 nm λCentroid: 845, 940 nm
Ie typ: 8 – 9 mW/sr Ie typ: 30 – 85 mW/sr
VF typ: 1.4 – 1.5 V VF typ: 1.2 – 1.4 V
All Optoelectronic Components at a glance:

www.we-online.com/optoelectronic
Explore our application notes

for Optoelectronics:

Phototransistors Optocoupler
Chip Top View PLCC Type Series 816

WL-STCW SMT Phototransistor WL-STTW SMT Phototransistor Extended WL-OCPT Optocoupler
Chip Waterclear Top Waterclear Phototransistor
Size: 0603, 0805, 1206 Size: 3528 Package: Series 814/817 DIP 4
λPeak: 940 nm λPeak: 940 nm Series 354/356/357 SOP4
ICE, p. typ.: 1.6 mA ICE, p. typ.: 3.1 mA Series 101x LSOP4
ICEO, Dark max.: 100 nA ICEO, Dark max.: 100 nA CTR: 50 – 600 %
Viso: 3750 – 5000 V
WL-STCB SMT Phototransistor WL-STTB SMT Phototransistor
Chip Black Top Black
Size: 0603, 1206 Size: 3528
λPeak: 940 nm λPeak: 940 nm
ICE, p. typ.: 1.2 mA ICE, p. typ.: 2.8 mA
ICEO, Dark max.: 100 nA ICEO, Dark max.: 100 nA
Chip Side View THT Round Laser

WL-STSW SMT Phototransistor WL-TTRB THT Phototransistor NEW WL-VCSL Vertical Cavity Surface
Sideview Waterclear Round Emitting Laser
Size: 1104 Size: 3 mm, 5 mm Size: 3535
λPeak: 940 nm λPeak: 940 nm λPeak: 940 nm
ICE, p. typ.: 2.5 mA ICE, p. typ.: 10 mA ΦV typ: 1900 mW
ICEO, Dark max.: 100 nA ICEO, Dark max.: 100 nA VF typ: 2V
WL-STSB SMT Phototransistor WL-TTRW THT Phototransistor
Chip Black Round Waterclear
Size: 1002 Size: 3 mm, 5 mm
λPeak: 940 nm λPeak: 850 nm
ICE, p. typ.: 1 mA ICE, p. typ.: 15 mA
ICEO, Dark max.: 100 nA ICEO, Dark max.: 300 nA
Chip Reverse Mount

WL-STRB SMT Phototransistor
Reverse mount Black
Size: 1206 (dome)
λPeak: 940 nm
ICE, p. typ.: 4.4 mA
ICEO, Dark max.: 100 nA

Optoelectronics

Modelithics

2 OPTOELECTRONICS  Products
WL-SIQW
SMT Infrared QFN LED Waterclear
■ High power output IR LED ■ IR cameras
■ Compact size ■ Security cameras
■ QuadFrame NoLead package ■ Face recognition
■ Peak wavelengths: 850 nm & 940 nm ■ Night vision
■ Low thermal resistance ■ Gaming and movement recognition
■ Standard soldering pad
New QFN Package www.we-online.com/wl-siqw
Size 2720
Electrical and Optical Characteristics @ 1 A
λPeak typ. Ie typ. Φe typ. VF typ. 2θ50% typ.
Order Code
(nm) (mW/sr) (mW) (V) (°)
15427285BA240 850 160 450 1.8
15427285BA242 850 350 900 3.2
120
15427294BA240 940 125 450 1.8
15427294BA242 940 360 1000 3
λPeak typ.: Peak Wavelength [typ.]; Ie typ.: Radiant Intensity [typ.]; Φe typ.: Radiant Flux [typ.]; VF typ.: Forward Voltage [typ.]; 2θ50% typ.: Viewing Angle Phi 0° [typ.]
Size 3535
Order Code
(nm) (mW/sr) (mW) (V) (°)
15435385A9040 400 800 1.8
850 90
15435385A9042 800 1400 3.2
Size 3737
Order Code
(nm) (mW/sr) (mW) (V) (°)
15437385AA540 180 700 1.8
850 150
15437385AA542 260 1100 3.2

WL-VCSL
VCSEL Laser
■ VCSEL laser ■ Biometrical recognition
■ Peak wavelength: 940 nm ■ LiDAR
■ High optical power ■ 3D recognition
■ Homogeneous radiation patterns: 60° x 45° & ■ Time of flight
110° x 85° ■ Autonomous robotics
■ Autonomous industry
Vertical cavity surface emitting laser www.we-online.com/wl-vcsl
Size 3535
Φe typ. λPeak typ. VF typ. 2θ50%, X typ. 2θ50%, Y typ.
Order Code
(mW) (nm) (V) (°) (°)
159353940B1300 1800 110 85
940 2
159353940A6300 1900 60 45
Φe typ.: Radiant Flux [typ.]; λPeak typ.: Peak Wavelength [typ.], VF typ.: Forward Voltage [typ.]; 2θ50%, X typ.: Viewing Angle (X-Axis) [typ.]; 2θ50%, Y typ.: Viewing Angle (Y-Axis) [typ.]
Optoelectronics

WL-SWTP
SMT White Top View PLCC LED
■ Fast switching ■ Light pipe application
■ No IR radiation ■ Indicator lights and backlighting for consumer and
■ High CRI industrial applications
■ Excellent performance and visibility ■ Indoor area lighting
■ Suitable for all SMT assembly methods ■ Downlight
■ Top view ■ Outdoor and architectural lighting systems
■ Wide viewing angle ■ High bay and low bay
■ Various of color temperature ■ Display and TV backlight
Increased efficiency www.we-online.com/wl-swtp
Size 5630
Electrical & Optical Characteristics @ 100 mA (typ.)
CCT typ. ΦV typ. VF typ. 2θ50% typ.
Order Code Emitting Color CRI typ. Chip Technology
(K) (lm) (V) (°)
158563227A Sunrise ■ 2700 32
158563230A Warm White ■ 3000 32
158563240A Moonlight ■ 4000 85 32 2.8 InGaN 120
158563250A Daylight ■ 5000 35
158563260A Cool White ■ 6000 35
CCT typ.: Correlated Color Temperature [typ.]; CRI typ.: Color Rendering Index [typ.]; ΦV typ.: Luminous Flux [typ.]; VF typ.: Forward Voltage [typ.];
2θ50% typ.: Viewing Angle Phi 0° [typ.]

WL-SBCW
SMT Bi-color Chip LED Waterclear
■ Two chips in one package ■ Backlighting applications
■ Small size ■ Status indicator
■ Industry standard footprint ■ Front panel indicators
■ High efficiency ■ Push button backlighting
■ Low power consumption ■ Symbol and switch backlighting
■ Wide viewing angle
■ Small package for exceptional brightness
■ Packaged in standard tape and 7" reel
■ Compatible with automatic placement machine
www.we-online.com/wl-sbcw
Size 0606
Technical Data:
λDom typ. λPeak typ. IV typ. VF typ. 2θ50% typ.
Order Code Emitting Color Chip Technology
(nm) (nm) (mcd) (V) (°)
150066RG74000
Red ■ 625 630 300 2
130 AlInGaP + InGaN
Green ■ 520 515 560 3.2
λDom typ.: Dominant Wavelength [typ.]; λPeak typ.: Peak Wavelength; IV typ.: Luminous Intensity; VF typ.: Forward Voltage; 2θ50% typ.: Viewing Angle Phi 0° [typ.]
Optoelectronics

WL-SBRW
SMT Bi-color Reverse Mount Waterclear
■ Bi-color LED ■ LED front panel indicators
■ Ideal for narrow space applications ■ LCD backlighting
■ Wide viewing angle ■ Backlighting for keypads, symbols and switch
■ Low power consumption buttons
■ Industry standard footprint ■ Messenger board
■ Small package for exceptional brightness ■ Networking and telecommunications
■ Compatible with automatic placement machine
Top mount version www.we-online.com/wl-sbrw
Size 1205, Top Mount Packaging
Technical Data:
(nm) (nm) (mcd) (V) (°)
156125YV73000P
Yellow ■ 592 592 70 2 AlInGaP
Bright Green ■ 571 573 50 2.1 AlInGaP
156125RV73000P
Red ■ 624 632 110 2
120°
AlInGaP
Bright Green ■ 571 573 170 2.1 AlInGaP
156125RG73000P
Red ■ 624 632 180 2 AlInGaP + InGaN
Green ■ 525 520 285 3.3 AlInGaP + InGaN
λDom typ.: Dominant Wavelength [typ.]; λPeak typ.: Peak Wavelength; IV typ.: Luminous Intensity; VF typ.: Forward Voltage; 2θ50% typ.: Viewing Angle Phi 0° [typ.]

WL-SMTW
SMT Mono-color TOP LED Waterclear
■ Low energy consumption ■ Backlight in LCD, cellular phones, switches,
■ High reliability keys, displays
■ Low current requirement ■ lluminated advertising, panels
■ Fast switching ■ Lighting devices: indicators, general lighting
■ Flexibility in design ■ Camera flash, hand carrier flash
■ Top view ■ Coupling into light guides
■ Compact package outline, ideal for miniature
applications
■ Variety of colors
Common anode / common cathode available www.we-online.com/wl-smtw
Size 3528 PLCC 4

Technical Data:
λPeak typ. λDom typ. IV typ. VF typ. 2θ50% typ.
(nm) (nm) (mcd) (V) (°)
150141RS73130 Red ■ 630 620 3000 2.4 AlInGaP
150141YS73130 Yellow ■ 592 590 3000 2.4 AlInGaP
150141GS73130 Green ■ 515 520 3500 3.2 InGaN
150141BS73130 Blue ■ 465 470 2200 3.2 InGaN
120
150141RS73140 Red ■ 630 620 3000 2.4 AlInGaP
150141YS73140 Yellow ■ 592 590 3000 2.4 AlInGaP
150141GS73140 Green ■ 515 520 3500 3.2 InGaN
150141BS73140 Blue ■ 465 470 2200 3.2 InGaN
λPeak typ.: Peak Wavelength [typ.]; λDom typ.: Dominant Wavelength [typ.]; IV typ.: Luminous Intensity [typ.]; VF typ.: Forward Voltage [typ.]; 2θ50% typ.: Viewing Angle Phi 0° [typ.]
Optoelectronics

WL-SMTD
SMT Mono-color TOP LED Diffused Dome
■ Industry Standard PLCC-4 ■ Traffic lights
■ High reliability LED package ■ Backlighting for central consoles, cabins or
■ High optical efficiency push buttons
■ Narrow viewing angle: 30° & 60° ■ Signal and symbol luminary
■ Compatible with both IR soldering process ■ Instrument panel backlighting
■ Common anode and common cathode ■ Navigation and audio system
Common anode & common cathode available www.we-online.com/wl-smtd
Size 3528
Technical Data:
(nm) (nm) (mcd) (V) (°)
150141SS63130 Super Red ■ 630 640 13000 2.4 AlInGaP 30
150141RS63130 Red ■ 620 630 16000 2.4 AlInGaP 30
150141YS63130 Yellow ■ 590 592 15000 2.4 AlInGaP 30
150141GS63130 Green ■ 520 515 30000 3.2 InGaN 30
150141BS63130 Blue ■ 470 465 6000 3.2 InGaN 30
λDom typ.: Dominant Wavelength [typ.]; λPeak typ.: Peak Wavelength [typ.]; IV typ.: Luminous Intensity [typ.]; VF typ.: Forward Voltage [typ.]; 2θ50% typ.: Viewing Angle Phi 0° [typ.]

WL-OCPT
Optocoupler Phototransistor
■ High isolation voltage ■ Measurement equipment
■ Good stability of inner isolation ■ Programmable controller
■ Stable CTR in full operation temperature range
■ Different CTR binnings available
■ High collector-emitter voltage
■ Fast switching times
All binnings and packages available ex stock www.we-online.com/wl-ocpt
Series 817, DIP4

Electrical & Optical Characteristics
Test Operating
VCE max. IF max. CTR min. CTR max. VISO
Order Code Package Input Condition Temperature
(V) (mA) (%) (%) (V (RMS))
CTR (°C)
140817140010 DIP 4, Standard 50 600
140817140110 DIP 4, Standard 80 160
140817140210 DIP 4, Standard 130 260
140817140310 DIP 4, Standard 200 400
140817140410 DIP 4, Standard 300 600
140817141010 DIP 4, M-Type 50 600
140817141110 DIP 4, M-Type 80 160
140817141210 DIP 4, M-Type 130 260
140817141310 DIP 4, M-Type 200 400
140817141410 DIP 4, M-Type 300 600
140817142000 DIP 4, S-Type 50 600
140817142100 DIP 4, S-Type 80 160
IF = 5 mA -55 up to
140817142200 DIP 4, S-Type DC 35 60 130 260 5000
VCE = 5 V +110
140817142300 DIP 4, S-Type 200 400
140817142400 DIP 4, S-Type 300 600
140817143000 DIP 4, SL-Type 50 600
140817143100 DIP 4, SL-Type 80 160
140817143200 DIP 4, SL-Type 130 260
140817143300 DIP 4, SL-Type 200 400
140817143400 DIP 4, SL-Type 300 600
140817144000 DIP 4, SLM-Type 50 600
140817144100 DIP 4, SLM-Type 80 160
140817144200 DIP 4, SLM-Type 130 260
140817144300 DIP 4, SLM-Type 200 400
Optoelectronics
140817144400 DIP 4, SLM-Type 300 600

VCE max.: Collector Emitter Voltage; IF max.: Forward Current; Test Condition CTR: Current Transfer Ratio (Test cond.); CTR min.: Current Transfer Ratio [min.]; CTR max.: Current
Transfer Ratio [max.]; VISO: Isolation Voltage

WL-OCPT
Optocoupler Phototransistor
Series 814, DIP4
Test Operating
(V) (mA) (%) (%) (V (RMS))
CTR (°C)
140814240010 DIP 4, Standard 20 300
140814240110 DIP 4, Standard 50 150
140814241010 DIP 4, M-Type 20 300
140814241110 DIP 4, M-Type IF = +/- 1 mA 50 150 -55 up to
AC 80 60 5000
140814242000 DIP 4, S-Type VCE = 5 V 20 300 +110
140814242100 DIP 4, S-Type 50 150
140814243000 DIP 4, SL-Type 20 300
140814243100 DIP 4, SL-Type 50 150
Series 356, SOP4

Test Operating
(V) (mA) (%) (%) (V (RMS))
CTR (°C)
140356145000 50 600
140356145100 80 160
IF = 5 mA -55 up to
140356145200 SOP 4 DC 80 60 130 260 3750
VCE = 5 V +110
140356145300 200 400
140356145400 300 600
Series 357, SOP4

Test Operating
(V) (mA) (%) (%) (V (RMS))
CTR (°C)
140357145000 50 600
140357145100 80 160
IF = 5 mA -55 up to
140357145200 SOP 4 DC 35 60 130 260 3750
VCE = 5 V +110
140357145300 200 400
140357145400 300 600

Series 354, SOP4
Operating
VCE max. Test Condition CTR min. CTR max. VISO
Order Code Package Input Temperature
(V) CTR (%) (%) (V (RMS))
(°C)
140354245000 IF = +/- 1 mA 20 300
SOP 4 AC 80 3750 -55 up to +110
140354245100 VCE = 5 V 50 150
VCE max.: Collector Emitter Voltage; Test Condition CTR: Current Transfer Ratio (Test cond.); CTR min.: Current Transfer Ratio [min.]; CTR max.: Current Transfer Ratio [max.]; VISO:
Isolation Voltage
Series 101x, LSOP4

Test Operating
(V) (mA) (%) (%) (V (RMS))
CTR (°C)
140105146000 50 150
140107146000 80 160
140106146000 IF = 5 mA 100 300 -55 up to
LSOP4 DC 80 60 5000
140108146000 VCE = 5 V 130 260 +110
140109146000 200 400
140100146000 300 600
Optoelectronics

2 OPTOELECTRONICS
Design Kits

White LEDs
White LEDs 158300
Demo Board White LEDs – PLCC 158999
Visible LEDs
Chip LED – Top View 150155
Chip LED – Reverse Mount & Side View 150156
PLCC, THT and Ceramic LED 150151
Demo Board Visible LEDs 9999003
Infrared LEDs
Infrared LEDs 154150
Order your Design Kit today!

www.we-online.com/designkit-154150

2 OPTOELECTRONICS  Additional Information
Optocoupler
Clear Epoxyd Compound Benefits of Optocoupler

Emitter Die
Protect your application against overvoltage
Bond Wire
Epoxyd Compound
Isolation of persons from dangerous electrical installations
Isolation of electrical systems
Separation of low-voltage from high-voltage circuits
Application Example
Detector Die PWM

Controller
Leadframe
Optocoupler
Isolation
Package DIP-4 SOP-4 LSOP-4

Leadframe Options (M, S, SL, SLM)
Dimensions [mm] 10.16 x 4.58 x 3.9 7.0 x 3.6 x 2.0 10.20 x 3.60 x 2.00
(L x W x H)
Series Series 816/817 Series 356/357 Series 10xx
DC Series
1 4
Anode Collector
2 3
Cathode Emitter
AC Series Series 814 Series 354
1 4
Anode / Cathode Collector
2 3
Cathode / Anode Emitter
Optoelectronics
See all articles:

ESD
www.we-online.com/wl-ocpt

Optocoupler
Isolation Types
Magnetic Isolation Electrical Capacitive Optical Coupling

with Transformers Coupling with Optocoupler
F or high frequency AC signal trans- E xcellent for very high frequency AC E xcellent electrical noise immunity with
mission with high isolation voltage signal transmission high isolation voltage in small package
Robust solution and very long lifetime DC and AC, analog and digital, low and
medium-frequency signal transmission
Application Examples of Optocouplers
Isolated Power Supplies Motor Driver / Control

Isolation Isolation
Barrier Barrier
VIN VOUT 12 V HVDC
Snubber Load
From M
MCU
Feedback
Flyback Rt Rf1
Controller RLED Compen-
sation WL-OCPT
IC Rf2
Circuit
Ccmp
WL-OCPT
Flyback Converter Feedback Loop Brushed DC Motor Driver
Providing robust galvanic isolation of feedback control loop in SMPS Breaking ground loops and providing safety isolation in high-voltage
motor drivers
AC or DC Voltage Detection Industrial Control Systems
Full - Isolation Output Isolation

bridge Barrier Module Barrier
Vac Rectifier Vcc
From CPU Field
MCU Actuator
+
‐
WL-OCPT WL-OCPT
AC-Mains Voltage Isolated Zero-Cross Detection PLC Digital Output Module
Safety isolation in phase-controlled AC motor, safety relays/ Ensuring noise immunity and safety in industrial environments
switches, etc.
All technical details:

www.we-online.com/redexpert-wl-ocpt

VCSEL Laser
Vertical Cavity Surface Emitting Lasers

Vertical cavity surface emitting lasers are emitter for homogeneous High quality
light and high optical power output. With the different Field of View, diffused silica glass
offered from the special diffused silica glass, they can be put in
multiple application – 3D sensing, LiDAR, Biomteric identification just
to name a few. The robust package with low thermal resistance makes
them suitable not only for commercial, but also industry applications. Robust housing
VCSEL arrays
Homogeneous illumination
High optical output – up to 2 W CW
Various viewing angle possible State of the art VCSEL
array chip & multiple
Low thermal resistance package gold wire bonding
Compared to standard LED emitter, VCSEL provide coherent light, Gold plated contact
which can be used, not only for illumination, also as structured light
for 3D and depth sensing. In addition, the homogeneous illumination Low thermal resistance
pattern is more suitable for better picture resolution and detection. ceramic substrate
More informations and details:

www.we-online.com/wl-vcsel
Illumination distribution Illumination distribution

of VCSEL of normal LEDs
Smart Factory and Lasers Light barriers –

occupation safety
Autonomous factory –
autonomous roboter
Motion detection –
Smart buildings
Optoelectronics
Production monitoring
Machine vision –
Other Application areas: Worker safety
Consumer applications e.g. like drones,
automatic mowers, cleaning robots
Safety applications e.g. light barriers

Infrared Application Portfolio
Industrial Applications
AUTOMATED INDUSTRY SURVEILLANCE TOUCHLESS DEVICES
Security area Night vision Desinfection
Counter and encoder Security cameras Watersyphons
Data transmission Hand dryer
WL-TIRW WL-SIQW WL-SITW WL-TIRW WL-SIMW WL-SIQW WL-SISW WL-SICW WL-SIRW
WL-TDRW WL-TTRW
WL-TDRB WL-TTRB WL-STSW WL-STCW WL-STRB
WL-STCB
Consumer Applications Public Applications

HOME APPLIANCES GAMING LIGHT BARRIERS
Smoke detector Keyboard / Mouse Automatic doors
Remote control Gestrue recognition Parking houses
Cleaning robots VR device
WL-SITW WL-SIRW WL-TIRW WL-SIQW WL-SIMW WL-SICW WL-SITW WL-SIRW WL-SIQW
WL-STTB WL-STRB WL-TTRB WL-SDCB WL-SDSB WL-STTB WL-STRB
Metering and Detection

With 22 infrared LED product
HEALTH MONITOR BIOMETRIC series we always offers the right
Pulse oximetry IDENTIFICATION solution for your application.
Heart rate monitoring Iris & Vein scan
Blood pressure Face recognition
We offer from the compact pack-
age on the market (0402), to the
highest power output (> 1 W).
And all this coupled with the
WL-SIRW WL-TIRW WL-SITW WL-SIQW WL-SIMW
corresponding IR detector –
Photodiode or Phototransistor.
WL-STCW WL-TTRW WL-STTW
Technical details on REDEXPERT: Check out all matchcodes online:

www.we-online.com/redexpert-ir-leds www.we-online.com/ir-leds

Compare and Select Horticulture LEDs
in REDEXPERT
Check Horticulture LEDs Suitable to

Your Application!
Test your recipes – see how they look
Compute your opto/electrical parameters
Test your ideas and estimate the output of your lamp
PPF values, power usage, R/B ratio and much more
directly computed
Optoelectronics
Try it out:
www.we-online.com/redexpert-horticulture

3 POWER MODULES
Products 174
Services & Support 175
172
3 POWER MODULES
Product Overview

MagI³C-LDHM
Variable Step Down Variable Isolated

LED Driver Modules
Regulator Modules SIP Modules
MagI³C-VDRM MagI³C-LDHM MagI³C-VISM
Variable Step Down Regulator LED Step Down High Current Variable Isolated SIP Module
Module Module VIN: 8 – 42 V
VIN: 2.95 – 50 V VIN: 4.5 – 60 V VOUT: 3.3 – 6 V
VOUT: 0.8 – 24 V VOUT: 4.5 – 60 V P0: 1W
IOUT: 1–6A IOUT: 0.45 A Visolation: 2000 V
Switching Frequency: 0.2 – 2 MHz Switching Frequency: 0.8 MHz
Variable Step Down Fixed Isolated

MicroModules Modules
Extended MagI³C-VDMM MagI³C-FISM
Variable Step Down MicroModule Fixed Isolated SIP Module
VIN: 2.5 – 5.5 V VIN: 3.3 – 24 V
VOUT: 0.6 – 5.5 V VOUT: 5 V / 12 V / 15 V
IOUT: 0.6 – 1.2 A P0: 1W
Switching Frequency: 2.25 – 4 MHz Visolation: 1000 – 4000 V
Fixed Step Down All Power Modules at a glance:

Regulator Modules www.we-online.com/power-mod
Extended MagI³C-FDSM
Fixed Step Down Regulator Module
VIN: 4.75 – 42 V
VOUT: 3.3 V / 5 V Explore our application notes
IOUT: 0.5 – 1 A
Switching Frequency: 0.3 – 0.7 MHz
for Power Modules:

Power Modules
Altium Designer, EAGLE


3 POWER MODULES  Products
MagI³C-VDMM
Variable Step Down MicroModule
■ Low conducted and radiated EMI (compliant to ■ Point-of-Load DC/DC applications from 5 V or
EN55032 class B / CISPR-32) 3.3 V rail
■ Very low profile LGA-6EP micropackage ■ Replacement for linear regulators
■ Ideal for space constrained applications ■ Interface and microcontroller supply
■ Power Good indicator to show VOUT status ■ DSP and FPGA power supply auxiliary voltages
■ 3 solder cycles supported ■ Portable instruments
■ Battery powered equipment
www.we-online.com/magic-vdmm
Size LGA-6EP
Technical Data:
VIN VOUT IOUT L W H
Order Code Version
(V) (V) (A) (mm) (mm) (mm)
171010501 2.5 – 5.5 0.8 – 5.5 1 Power Good 3.2 2.5 1.6
VIN: Input Voltage; VOUT: Output Voltage; IOUT: Output Current; L: Length; W: Width; H: Height

3 POWER MODULES  Services & Support
All you Need in One Package –

MagI³C Power Modules
MagI³C Power Modules are easy to use DC/DC converters with integrated regulator IC, power inductor and capacitors. Design and layout
reviews as well as support with EMC filter design are offered as a service for all customers. Datasheets contain detailed specifications and
application information.
Power Module
T1 L1
Design-In Support CIN Controller IC

T2
COUT RLOAD
RS
Product related & application specific support by hotline
Feedback
Troubleshooting and individual design solutions Error Amplifier
Adj. Current
Set Value
R1
Error Amplifier
R2
Adj. Voltage
Set Value
EMC Filter Design Support

S olution for conducted & radiated emissions + Power Module
Tested filter configurations for EN55032 / CISPR-32 class
compliance with inductor & capacitor order codes
EMI filter EN55032 / CISPR-32 class B compliance
Real EMI behavior shown on REDEXPERT
Gain and phase response of EMI filter shown on REDEXPERT
Layout Review Support

Individual review of customer layouts
Reference layout included in every datasheet
 120 °C
Thermal Design Support
Thermal behavior of power modules shown on REDEXPERT
Simulation of temperature distribution on PCB  70 °C
Module temperature versus PCB area
Interactive power loss chart on REDEXPERT
Power Modules
Get in contact with our Service Hotline:

powermodules@we-online.com

3 POWER MODULES  Additional Information
LDHM / VDRM / VDMM Portfolio
Variable Step Down Regulator Modules (VDRM) /

LED Step Down High Current Module (LDHM) – High VIN
VIN [V]
TO263
60 QFN-41
50
171 021 501 9 V / 12 V / 18 V / 24 V Input Rail / Variable Output:
TO263 TO263 / 6 – 42 V / 1 A, 2 A, 3 A / 5 – 24 V Output
42
TO263 / 6 – 42 V / 1 A, 2 A, 3 A / 0.8 – 6 V Output
172 946 001
36 QFN-41 / 7 – 50 V / 2.5 A / 2.5 – 15 V Output

171 012 401
171 010 601
171 012 402

171 020 601
171 032 401

171 030 601
28 171 050 601 TO263 / 6 – 36 V / 5 A / 0.8 – 6 V Output
LED Driver:
TO263 / 4.5 – 60 V / 450 mA / 1 – 16 LEDs
7
6
4.5
IOUT [A]
0.5 1 1.5 2 3 4 5
Variable Step Down Regulator Modules (VDRM) /

MicroModule (VDMM) – Low VIN
VIN [V] 5 V / 9 V / 12 V Input Rail / VDRM:
LGA-16 / 4 – 18 V / 1 A, 2 A, 3 A / 0.8 – 17 V Output
28 LGA-16 3.3 & 5 V Input Rail / VDRM:

QFN-39 / 2.95 – 6 V / 2 A, 4 A, 6 A / 0.8 – 3.6 V Output
18
MicroModule / VDMM:
171 011 801
171 021 801
171 031 801
LGA-6 / 2.7 – 5.5 V / 0.6 A / 0.6 – 5.5 V Output

LGA-6 / 2.5 – 5.5 V / 1.0 A / 0.8 – 5.5 V Output*
LGA-6 / 2.5 – 5.5 V / 1.2 A / 0.8 – 5.5 V Output
6
5.5
171 020 302
171 040 302
171 060 302

171 960 501
171 010 502

171 010 501
171 010 550
2.95 QFN-39
2.7
LGA-6
2.5
IOUT [A]
0.1 0.6 1 1.2 2 3 4 5 6 * Option Mode or PowerGood

LDHM / VDRM Portfolio
LDHM / VDRM MagI³C Power Modules

Type Input Rail VIN VOUT IOUT max Package Order Code Order Code
(V) (V) (V) (A) Module EVAL Board
LED Step Down High Current Module (LDHM)
5, 9, 12, 18,
4.5 – 60 16 LEDs** 0.45 TO263-7EP 172 946 001 178 946 001
24, 36, 48
Variable Step Down Regulator Module (VDRM)
1 171 010 601 178 010 601
6 – 42 2 171 020 601 178 020 601
0.8 – 6
3 171 030 601 178 030 601
9, 12, 18, 6 – 36 5 TO263-7EP 171 050 601 178 050 601
24, 36* 1 171 012 401 178 012 401
6 – 42 5 – 24 2 171 012 402 178 012 402
3 171 032 401 178 032 401
7 – 50* 2.5 – 15 2.5 BQFN-41 171 021 501 178 021 501
2 171 020 302 178 020 302
3.3, 5 2.95 – 6 0.8 – 3.6 4 BQFN-39 171 040 302 178 040 302
6 171 060 302 178 060 302
* 36 V rail only supported by 50 VIN module

** with forward voltage of 3.2 V each
TO263 MagI³C Power Modules

Leaded package for easy manufacturing
and prototyping
Simple layout
Wide input voltage range for input transient
capability
Support ambient temperatures up to 105 °C
2 solder cycles supported
BQFN MagI³C Power Modules

Low profile package
Simple application circuit (only 4 external
components required)
Optional multiple features (adjustable frequency,
adjustable soft-start, power-good, sequencing,
tracking, synchronization to external clock,
adjustable under-voltage lockout)
Power Modules
Wide input voltage range (only for BQFN41)


VDMM / VDRM Portfolio
VDMM / VDRM MagI³C Power Modules

Variable Step Down MicroModule (VDMM)
2.7 – 5.5 0.6 – 5.5 0.6 171 960 501 178 960 501
3.3, 5 1 LGA-6EP 171 010 502 178 010 502
2.5 – 5.5 0.8 – 5.5
1.2 171 010 550 178 010 550
Variable Step Down Regulator Module (VDRM)
1 171 011 801 178 011 801
5, 9, 12 4 – 18 0.8 – 17 2 LGA-16EP 171 021 801 178 021 801
3 171 031 801 178 031 801
LGA-6 MagI³C Power Modules

Very low profile micro package
Ideal for space constrained applications
Selectable forced PWM or auto PFM/PWM
mode
LGA-16 MagI³C Power Modules

Low profile LGA package
Stand alone solution (CIN and COUT
integrated, only 2 external components
needed to set VOUT)
Ideal for space constrained applications
Auto PFM/PWM mode

FDSM / FISM / VISM Portfolio
Fixed Step Down Regulator Module (FDSM)
VIN [V]
60
50
42
173 010 542
173 010 342
36 9 V / 12 V / 18 V Input Rail / Fixed Output:
173 950 336 173 010 335 SIP-3 / 6 – 28 V / 0.5 A / 3.3 V or 5 V Output
173 950 536 173 010 535
28 SIP-3 / 7 – 28 V / 1 A / 3.3 V or 5 V Output
SIP-3
173 010 378
173 010 578
18
173 950 378
173 950 578
9 V / 12 V / 18 V / 24 V Input Rail / Fixed Output:

SIP-3 / 4.75 – 36 V / 0.5 A / 3.3 V or 5 V Output
7 NEW SIP-3 / 6 – 36 V / 1 A / 3.3 V or 5 V Output
6 SIP-3 / 7 – 42 V / 1 A / 3.3 V or 5 V Output
4.5
2.95
IOUT [A]
0.1 0.5 1 1.5 2
Fixed Isolated SIP Module (FISM) / Variable Isolated SIP Module (VISM)
VIN [V]
3.3 V / 5 V / 12 V / 24 V Input Rail / Fixed Output:
SIP-4 / 1 W / 3.3 VIN / 5 VOUT / 1 kV
60 SIP-4 / 1 W / 5 VIN / 5 VOUT / 1 kV
SIP-4 / 1 W / 12 VIN / 5 VOUT / 1 kV
50
SIP-4 / 1 W / 24 VIN / 5 VOUT / 1 kV
SIP-8
42 SIP-4 SIP-7 3.3 V / 5 V / 12 V Input Rail / Fixed Output:
SMT-8 / 1 W / 3.3 VIN / 5 VOUT / 2 kV
177 910 632 15
24 177 920 531 177 920 534

SMT-8 SMT-8 / 1 W / 5 VIN / 5 VOUT / 2 kV
12 177 920 521 176 920 522 177 920 524
SMT-8 / 1 W / 5 VIN / 12 VOUT / 2 kV
SMT-8 / 1 W / 5 VIN / 15 VOUT / 2 kV
8 SMT-8 / 1 W / 12 VIN / 5 VOUT / 2 kV
6 176 861 512
5 V / 12 V / 24 V Input Rail / Fixed Output:
177 920 511 176 881 212 177 920 514
SIP-7 / 1 W / 3.3 VIN / 5 VOUT / 4 kV
176 920 512 SIP-7 / 1 W / 12 VIN / 5 VOUT / 4 kV
4
3.3 177 920 501 177 920 502 SIP-7 / 1 W / 24 VIN / 5 VOUT / 4 kV
9 V / 12 V / 18 V / 24 V Input Rail / Adjustable Output:

Power Modules
Visolation [kV]
1 2 4 SIP-8 / 1 W / 8 – 42 VIN / 3.3 – 6 VOUT / 2 kV

FDSM Portfolio (Through-Hole Package)
FDSM MagI³C Power Modules

Fixed Step Down Regulator Module (FDSM)
6 – 28 3.3 0.5 173 950 378
6 – 36 3.3 1 173 010 335
9, 12, 18 7 – 28 5.0 0.5 SIP-3 173 950 578
7 – 28 3.3 173 010 378
1
8 – 28 5.0 173 010 578
17800FDSM*
4.75 – 36 3.3 173 950 336
0.5
6.5 – 36 5.0 173 950 536
9, 12, 18, 24 6.36 5.0 SIP-3 173 010 535
7 – 42 3.3 1 173 010 342
8 – 42 5.0 173 010 542
* module is not included
SIP-3 MagI³C Power Modules

Easy design-in (no power supply
knowledge required)
Leaded through-hole package for easy
manufacturing and prototyping
Stand alone solution (CIN and COUT integrated,
no external components)
L78x series linear regulator replacement
(no heatsink required)

Fixed Isolated SIP / SMT Module Portfolio
FISM MagI³C Power Modules

Type Input Rail VIN VOUT POUT max Visolation (V) Package Order Code Order Code
(V) (V) (V) (W) functional Module EVAL Board
Fixed Isolated SIP Module (FISM)
3.3 177 920 501
5.0 177 920 511
5.0 1 1000 SIP-4 178 920 5X1*
12 177 920 521
24 177 920 531
3.3 176 920 502
±10 % from 5.0 5.0 176 920 512
nominal VIN 12 1 2000 SMT-8 176 920 522 17800 FISM*
12 176 881 212
5.0
15 176 861 512
5.0 177 920 514
12 5.0 1 4000 SIP-7 177 920 524 178 920 5X4*
24 177 920 534
* module is not included
SIP-4 / SIP-7 / SMT-8 isolated

Easy isolated design-in (no transformer
design know-how required)
SIP: Leaded through-hole package for easy
SMT: Industrial standard surface mount
package
Simple functional isolation for overvoltage
protection, avoiding ground loops, ground shift
and noise in signal path or sensor systems
Industrial standard package and pin
configuration
IEC/EN/UL60950 approved
Power Modules

Variable Isolated SIP Module Portfolio
VISM MagI³C Power Modules

Type Input Rail VIN VOUT POUT max VISO (V) Package Order Code Order Code
(V) (V) (V) (W) functional Module EVAL Board
Variable Isolated SIP Module (VISM)
9, 12, 18, 24 8 – 42 3.3 – 6 1 – 3* 2000 SIP-8 177 910 632 15 17800 VISM
* 3 W dynamic power boost for 0.5 s
SIP-8 adjustable isolated

Easy isolated design-in (no transformer
design know-how required)
Flexible: Wide VIN and adjustable regulated,
short circuit protected VOUT
Power Boost: Tripple output power for short
term load demands
SIP: Leaded through-hole package for easy
Simple functional isolation for overvoltage
protection, avoiding ground loops, ground shift
and noise in signal path or sensor systems
Industrial standard package and pin
configuration
UL62368 approval
View details of emissions and temperature

behavior in REDEXPERT:
www.we-online.com/re-behavior

Reference Designs
Product Category Product Name Description Order Code

Reference Design
MagI³C LED Driver VIN: 7 – 24 V; VOUT: up to 15 V; IOUT: 1.5 A 178 001
VDRM (171021501) MagI³C Power Supply VIN: 7 – 36 V; VOUT: 0 – 15 V; IOUT: 0 – 2.5 A 178 002
MagI³C Current Sharing VIN: 7 – 50 V; VOUT: 2.5 – 15 V; IOUT: 0 – 5 A 178 003
VDRM (171031801) MagI³C Current Source VIN: 4 –18 V; VOUT: 1.45 – 14.4 V; IOUT: 0 – 3 A 178 004
LDHM (172946001) MagI³C Multi Color LED Driver VIN: 18 – 48 V; VOUT: 1.8 – VIN; IOUT: up to 450 mA 178 005 0
MagI³C Power Supply – 178002

7 – 36 VIN / 0 – 2.5 A / 0 – 15 VOUT
Can be used as a constant current source
Current and voltage dynamically adjustable
by external microcontroller (using PWM)
Designed for battery charger, super cap
charger and high power LED driver
applications
Current Source – 178004

4 – 18 VIN / 0 – 3 A / 0 – 17 VOUT
Current dynamically adjustable by external

microcontroller (using PWM)
Voltage limit (end of charge voltage) can
be individually selected by jumper
Designed for battery charger, super cap
charger and high power LED driver
applications
Multi Color LED Driver – 1780050

18 – 48 VIN / 0 – 0.45 A / 0 – 48 VOUT
4 channel LED driver

Dimming can be set by Bluetooth® with IOS
app “WEilluminate”
Intensity of each channel can be adjusted
individually (dimming 0 – 100 %)
Power Modules
Designed for horticulture lighting, mixing of

white color temperatures, mixing of RGBW
(red, green, blue, white) applications

Reference Filter Bags
Characteristics
Discrete filter parts for conducted filtering
Differential and common mode filter
Tested according to EN55032 class B
Application specific for short wire length
Applications
Data acquisition
Test and measurement systems
Interface and microcontroller supply
Industrial control
SIP-8 177001BAG
Order Code C (VR) L (IR) fcutoff* Y-Cap (VISO) Power Module

177 001 BAG 10 µF (50 V) 22 µH (1 A) 11 kHz 470 pF (5 kV) 177 910 632 15
177 002 22 µF (10 V) 3.3 µH (2 A) 19 kHz 470 pF (2.5 kV) 177 920 501
177 003 10 µF (25 V) 4.7 µH (1.8 A) 23 kHz 470 pF (2.5 kV) 177 920 511
177 004 4.7 µF (50 V) 22 µH (1 A) 16 kHz 470 pF (2.5 kV) 177 920 521
177 005 2 x 4.7 µF (50 V) 68 µH (0.56 A) 6 kHz 1000 pF (5 kV) 177 920 531
Isolated
177 006 10 µF (25 V) 4.7 µH (1.8 A) 23 kHz 470 pF (5 kV) 177 920 514
177 007 4.7 µF (50 V) 22 µH (1 A) 16 kHz 470 pF (5 kV) 177 920 524
177 008 2.2 µF (50 V) 47 µH (0.68 A) 16 kHz 470 pF (5 kV) 177 920 534
176 920 502
176 920 512
176 001 22 µF (10 V) 2.2 µH (2.5 A) 23 kHz 470 pF (2.5 kV)
176 881 212
176 861 512
176 002 10 µF (25 V) 10 µH (1.45 A) 16 kHz 470 pF (2.5 kV) 176 920 522
Order Code C (VR) L (IR) fcutoff* Power Module

171 001 10 µF (63 V) 2.2 µH (2.5 A) 34 kHz 171 050 601
171 010 601
171 002 1 µF (50 V) 10 µH (2.2 A) 50 kHz 171 020 601
Non-Isolated
171 030 601

171 011 801
171 003 10 µF (25 V) 10 µH (2.3 A) 16 kHz 171 021 801
171 031 801
173 950 336
173 001 10 µF (63 V) 1 µH (4 A) 50 kHz
173 950 536
* Typically calculated values without DC bias effect

REDEXPERT Overview Power Modules
Filter for Features such as

“Externaly Adjustable Soft Start”
Select by electrical and mechanical parameters
Compare schematics
Compare efficiency
Get insights about thermal behavior
Get fast info about EMI behavior
Power Modules
Try it out:
www.we-online.com/redexpert-power-modules

General Terms and Conditions
of the Würth Elektronik eiSos Group
As of: May 2018
1. Application individual contract, Würth Elektronik shall be entitled to refuse to

1.1 These General Terms and Conditions (hereinafter "Conditions") continue to execute the contract until the customer makes payment or
shall apply to all deliveries and services of Würth Elektronik eiSos provides security for such. If the customer is in default of payment, all
GmbH & Co. KG, Würth Elektronik iBE GmbH and Erwin Büchele the receivables of Würth Elektronik that are outstanding with the
GmbH & Co. KG (hereinafter "Würth Elektronik") even if they are not customer shall become due immediately.
referred to in subsequent contracts. Any terms and conditions of the
customer that conflict with, supplement, or deviate from these 3.5 Payment shall be deemed made on the date on which Würth
Conditions shall not become part of the contract unless their application Elektronik can dispose of the amount owed. When paying by cheque,
is expressly approved by Würth Elektronik in writing. These Conditions payment shall only be deemed made after the cheque has been cashed
shall apply even if Würth Elektronik accepts a delivery or service from and Würth Elektronik can dispose of the amount. Discount charges and
the customer without reservations whilst being aware of the customer's other cheque costs shall be borne by the customer. In the event of
conflicting or deviating terms and conditions. default of payment, the customer shall pay default interest at the rate of
9 percentage points above the base rate. The right to assert a further
1.2 Agreements which supplement or deviate from these Conditions claim for damages is not excluded.
and which are made between the customer and Würth Elektronik for the
performance of a contract must be set out in writing in the contract. This 3.6 Würth Elektronik shall be entitled to credit payments made by the
also applies to the cancellation of this requirement of the written form. customer towards the customer's oldest debt first. If costs and interest
have already accrued, Würth Elektronik shall be entitled to credit the
1.3 Any rights beyond these Conditions to which Würth Elektronik is payment towards the costs first, then towards interest, and finally
entitled by law shall remain unaffected. towards the principal claim.
2. Offer and formation of contract 3.7 Counterclaims of the customer may only be set off or used to assert
2.1 Offers from Würth Elektronik shall be subject to change and non- a right of retention by the customer if they have become final by virtue
binding, unless they are expressly stated to be binding. of a judgment or if they are undisputed. A right to retain may be asserted
by the customer only if the customer’s counterclaim is based on the
2.2 Pictures, drawings, information as to weight, measurement, same contractual relationship.
performance and consumption as well as other descriptions of the
goods in the documentation pertaining to the offer shall be 4. Deliveries
approximations only, unless they are expressly stated to be binding. 4.1 Delivery periods and dates shall only be binding for Würth
They do not constitute an agreement on, or guarantee of, the Elektronik if Würth Elektronik explicitly states or confirms that they are
corresponding quality of the goods. binding. Agreed delivery periods shall be deemed met if the goods have
been handed over to the person in charge of the transport at Würth
2.3 Würth Elektronik reserves all proprietary rights and copyrights in Elektronik's registered office or at one of Würth Elektronik's warehouses
any offer documents. Such documents may not be made available to before this period has expired or if Würth Elektronik has provided
any third party. notification that they are ready for dispatch but have not left the
registered office or warehouse because the customer has declared that
2.4 Orders from the customer shall be binding. Würth Elektronik may it will not accept the goods.
accept orders by sending a written order confirmation, by making
delivery or providing the services. 4.2 If making the agreed deliveries or providing the services of Würth
Elektronik requires the cooperation of the customer, the customer shall
2.5 Executing orders according to the documents to be provided by the ensure that Würth Elektronik is provided with all the necessary and
customer shall require written approval by Würth Elektronik. appropriate information and data within good time and that such is of
the required quality. If programming is required, the customer shall
2.6 Contracts that are concluded shall oblige the customer to accept provide Würth Elektronik with the necessary computer processing
and pay for the goods or services ordered. power, test data and data inputting capacities within good time and to a
sufficient extent.
3. Prices, payment, set-off
3.1 The agreed price shall always be decisive. Not included in the price 4.3 The delivery period shall not start before all the documents,
shall, in particular, be the costs for packaging, freight, insurance, information, approvals and permits that are to be provided by the
customs, public levies and VAT. Statutory VAT shall be stated customer have been provided in full and any technical issues have been
separately in the invoice, at the statutory rate applicable on the day the clarified and any agreed down-payment has been received. As a
invoice is issued. prerequisite for compliance with the delivery period or the delivery date,
the customer must perform its other obligations properly and in due
3.2 For services that shall not be performed within a period of four time. Compliance with the agreed delivery deadlines and delivery dates
month after the contract has been concluded Würth Elektronik shall be is subject to the condition that Würth Elektronik is supplied by its own
entitled to adjust the price in line with any increases in wages and in the suppliers in due time and properly. Any changes or amendments that
cost of materials that may have occurred in the meantime. The same are subsequently agreed with Würth Elektronik may result in a
shall apply for services that are to be provided as part of continuous reasonable extension of the agreed delivery dates.
obligations. If Würth Elektronik has agreed with the customer that the
prices shall depend on specific price factors, for example, raw material 4.4 Würth Elektronik shall be entitled to make reasonable part
prices, changes in the price factors can lead to price adjustments, deliveries and provide partial services. Unless otherwise expressly
irrespective of the performance period. agreed, deliveries and services ahead of schedule shall be allowed.
3.3. Unless otherwise agreed, payment shall be made net within 30 4.5 If the customer is in default of acceptance or violates other duties
days after the date of the invoice. Würth Elektronik shall, however, be to cooperate, Würth Elektronik can claim compensation for the damage
entitled to make the execution of outstanding deliveries or the provision caused including any additional expenditure and storage costs. Any
of services contingent upon pre-payment or the provision of security if other claims remain unaffected. Würth Elektronik shall be entitled, after
no previous business relationship exists with the customer, deliveries setting a reasonable subsequent deadline, to otherwise dispose of the
are to be made abroad, the customer's registered office is abroad or if goods and to supply the customer with new goods within a reasonable
there are any other reasons that give Würth Elektronik reason to doubt extended deadline.
that payment will be made promptly after delivery or provision of the
services. 5. Passing of risk/dispatch
5.1 The risk of accidental loss or accidental deterioration of the goods
3.4 If after the contract has been entered into Würth Elektronik shall pass to the customer at the latest when the goods are handed over
becomes aware of circumstances that could considerably reduce the to the customer or, if it is agreed that the goods will be shipped, already
customer's creditworthiness and which could endanger the payment of with the handing over of the goods to the shipping company, freight
outstanding receivables of Würth Elektronik by the customer under the carrier or to any other person instructed to carry out the dispatch. This

shall also apply to part deliveries or if it has been agreed that the for collection, provide the related documents and inform the debtors of
dispatch is “freight paid” or free of charge. In the absence of written the assignment.
instructions from the customer, Würth Elektronik shall be entitled to
choose the carrier and the itinerary at its own discretion and after a due 6.4 In the event of default of payment on the part of the customer,
assessment of the circumstances. At the request and expense of the Würth Elektronik shall be entitled to rescind the contract without
customer, Würth Elektronik shall take out transport insurance to insure prejudice to its other rights. The customer must immediately grant
the goods against the risks specified by the customer. Würth Elektronik, or any third party commissioned by Würth Elektronik,
access to the goods that are subject to retention of title, surrender such
5.2 If there is a delay in handing over or dispatch for reasons for which goods and inform Würth Elektronik where these goods are located.
the customer is responsible, the risk shall pass to the customer on the After a timely warning to such effect, Würth Elektronik may otherwise
day the goods are ready to be dispatched and Würth Elektronik informs dispose of the goods that are subject to retention of title for the purpose
the customer of such. of satisfying its due claims against the customer.
5.3 If Würth Elektronik chooses the type of dispatch, the dispatch route 6.5 Any processing or alterations made by the customer to the goods
and/or the person to carry out the dispatch, Würth Elektronik shall only which are subject to retention of title shall always be deemed made on
be liable for wilful misconduct or gross negligence resulting from this behalf of Würth Elektronik. The customer’s right to acquire ownership
choice. of the goods which are subject to retention of title continues to exist as
a right to acquire ownership of the processed or altered item. If the
6. Retention of title goods are processed, combined or mixed with other goods that are not
6.1 The goods supplied remain the property of Würth Elektronik until owned by Würth Elektronik, Würth Elektronik shall acquire a co-
all receivables owed to Würth Elektronik by the customer as a result of ownership interest in the new item that is equal to the ratio of the value
the business relationship have been fully paid. If Würth Elektronik's of the goods supplied to the value of the other items processed at the
obligations to be performed include delivering software, up until time of processing. The customer shall store the new items on behalf of
payment in full has been made of any receivables, the customer shall Würth Elektronik. In all other respects, the item created through
in any case only be granted a revocable usage right. These receivables processing or alteration shall be governed by the same provisions as
also include claims under cheques and bills of exchange, as well as the goods that are subject to retention of title.
current-account claims. The customer shall be obliged to handle all
goods to which title is retained, and as long as title is retained, with due 6.6 If requested by the customer, Würth Elektronik shall be obliged to
care. In particular, the customer is obliged to sufficiently insure the surrender the security interests to which Würth Elektronik is entitled to
goods at the customer’s own expense against damage by fire, water, the extent that the realizable value of these security interests exceeds
and theft at their replacement value. The customer hereby assigns to Würth Elektronik’s receivables arising from the business relationship
Würth Elektronik all claims for compensation arising from such with the customer by more than 20% upon deduction of the mark-downs
insurance. Würth Elektronik hereby accepts the assignment. If an customary in the banking business. For valuation purposes, goods that
assignment is not allowed, the customer hereby irrevocably instructs its are subject to retention of title shall be assessed on the basis of their
insurer to make payments, if any, only to Würth Elektronik. This does invoice value and receivables shall be assessed on the basis of their
not affect any further claims of Würth Elektronik. Upon request, the nominal value.
customer must provide Würth Elektronik with evidence of the
conclusion of the insurance policy. 6.7 In the event that goods are delivered to destinations with other legal
systems in which the retention of title pursuant to clauses 6.1 to 6.6
6.2 The customer shall only be allowed to sell the goods which are above does not offer the same degree of protection as in the Federal
subject to retention of title in the ordinary course of business. The Republic of Germany, the customer hereby grants Würth Elektronik the
customer shall not be entitled to pledge the goods which are subject to equivalent security interest. If the creation of this security interest
retention of title, to transfer them by way of security or to make any other requires further declarations or actions, the customer shall make these
dispositions which may jeopardize Würth Elektronik's ownership. In the declarations and perform these actions. The customer shall assist with
event of attachments or other encroachments by third parties, the all measures required for, and conducive to, the validity and
customer must notify Würth Elektronik without undue delay in textual enforceability of such security interests.
form and provide all the information required, advise the third party of
Würth Elektronik’s property rights and assist with the measures taken 7. Claims for quality defects and liability
by Würth Elektronik to protect the goods which are subject to retention 7.1 Würth Elektronik shall manufacture its products according to the
of title. The customer shall bear any costs for which it is responsible and state of the art in technology applicable at time of entering into the
which are necessary for the removal of the encroachment and the contract. Any intended usage that goes beyond the customary usage of
recovery of the goods, if and to the extent that these costs cannot be the products or that requires a quality that deviates from the norm, in
obtained from the third party. particular, any usage that is relevant for safety purposes, for example,
aerospace or automobile usage, must be agreed in advance in writing.
6.3 The customer hereby assigns to Würth Elektronik all receivables
arising from the resale of the goods, including all ancillary rights, 7.2 The customer's defect rights shall require that the customer has
irrespective of whether the goods which are subject to retention of title fulfilled its statutory obligations to inspect and give notice of defects
are resold without or after further processing. Würth Elektronik hereby (Sec. 377, 381 German Commercial Code (HGB)), in particular that the
accepts this assignment. In the event that such assignment is not customer has checked the delivered goods upon receipt and notified
allowed, the customer hereby irrevocably instructs the third-party debtor Würth Elektronik without undue delay and in textual form upon receipt
to make payments, if any, only to Würth Elektronik. The customer has of the goods of any obvious defects and defects that could be identified
the authority, which may be revoked at any time, to collect the during such inspection. The customer shall inform Würth Elektronik in
receivables assigned to Würth Elektronik as a trustee on behalf of writing of any hidden defects without undue delay after they have been
Würth Elektronik. All amounts collected must be remitted to Würth discovered. The notification shall be deemed without undue delay if
Elektronik immediately. Würth Elektronik may revoke the customer’s made within two weeks after delivery for obvious defects and defects
authority to collect receivables and its right to resell the goods if the that could be identified during a proper inspection or after discovery in
customer fails to properly perform its payment obligations to Würth the event of hidden defects; to meet the deadline, the dispatch of the
Elektronik, if the customer is in default of payment or stops payment, or notification or complaint shall suffice. If the customer fails to carry out a
if the creditworthiness or financial position of the customer deteriorates, proper inspection and/or notification of the defects, Würth Elektronik
he cease any other business activity essential for the contractual shall not be liable for the defect. When reporting defects to Würth
performance or if he becomes incapable for other reasons to fulfil the Elektronik, the customer must supply a detailed description of the
contractual duties. Any resale of these receivables is subject to prior defects in textual form.
approval by Würth Elektronik. The customer’s authority to collect shall
expire with the notification of the assignment to the third-party debtor. 7.3 Unless otherwise agreed, the customer shall initially deliver the
In the event of a revocation of the authority to collect, Würth Elektronik goods at its own expense to Würth Elektronik so that the defects can
may request that the customer disclose all receivables assigned, as be examined. The expenses that are required for the inspection and
well as the respective debtors' names, provide all information necessary subsequent performance, in particular transportation, travel, labour and

General Terms and Conditions
of the Würth Elektronik eiSos Group
As of: May 2018
material costs within the meaning of Sec. 439 (2 and 3) German Civil 7.11 The limitation period for claims for defects of the customer shall
Code (BGB) shall only be borne by Würth Elektronik if it is determined be one year, unless the defective good has been used in its customary
during the inspection that a defect actually exists and provided these manner for a building and this has caused a defect to the building. The
expenses are not increased due to the fact that the customer took the limitation period shall also apply to claims resulting from a tortious act
goods to a different location than the original delivery address. that are based on a defect of the goods. The limitation period shall start
Personnel and material costs claimed by the customer in this with the delivery of the goods. This shall not affect the unlimited liability
connection shall be charged on the basis of net costs. The of Würth Elektronik for damage resulting from a breach of guarantee or
reimbursement of the costs for removal and installation in the context from death, bodily injury or damage to health, for wilful misconduct and
of supplementary performance regardless of fault is excluded. Equally gross negligence, and product defects. If Würth Elektronik makes a
excluded is the applicability of Sec. 445 a and 445 b German Civil Code statement with regard to a claim for defects asserted by the customer,
(BGB). this shall not be deemed as the start of negotiations with regard to the
claim or the circumstances on which the claim is based, provided the
7.4 If the goods are defective, Würth Elektronik shall be entitled - for claim for defects is fully rejected by Würth Elektronik.
the purposes of subsequent performance - to choose between
remedying the defect or delivering goods that are free from defects. 8. Intellectual property and usage rights relating to software and
other protected products, information and co-operation duties
7.5 If Würth Elektronik is not prepared or is not in a position to carry out 8.1 Unless otherwise provided in the contract or by law, any rights
subsequent performance after a reasonable deadline has expired, the relating to software or other protected products which are delivered to
customer can choose to rescind the agreement or reduce the purchase the customer or which are produced for the customer, in particular,
price. The same shall apply if the subsequent performance fails, if it is copyrights, industrial property rights such as, patents, trademarks and
unacceptable to the customer or if a reasonable deadline is exceeded registered designs, shall remain the property of Würth Elektronik or the
due to reasons for which Würth Elektronik is responsible. individual proprietor of the rights. This shall also apply if the software or
any other protected products are produced according to the
7.6 The customer shall have no right to rescind the contract if the specifications of or in co-operation with the customer.
customer is unable to return the goods received and this is not due to
the fact that it is impossible to return such due to their nature, if Würth 8.2 If Würth Elektronik uses the customer's software, Würth Elektronik
Elektronik is responsible for such or if the defect did not become shall only use such software for the contractually agreed purpose. If
apparent until after the goods were processed or altered. The right to Würth Elektronik requires the source codes for the software to make
rescind the contract shall furthermore not exist if Würth Elektronik is not contractually agreed changes or remedy defects, the customer shall
responsible for the defect and if instead of the received goods or provide Würth Elektronik with such free of charge for use.
services being returned by the customer, Würth Elektronik has to pay
compensation for lost value. 8.3 The customer shall only receive a simple right of use to the software
and other protected products to such extent as is required for the
7.7 Claims for defects shall not exist with respect to defects that are purpose of the contract, unless otherwise provided in the contract, in
due to natural wear and tear, to improper handling by the customer or particular, the applicable licencing terms of the software or an individual
a third party, or to changes or repairs to the goods that have been licence agreement, or by mandatory statutory law. With regard to
carried out by the customer or a third party in an improper manner. The software provided by Würth Elektronik, unless expressly permitted
same shall apply to defects which can be attributed to the customer or under the contract or by law, the customer shall in particular be
which arise as a result of technical reasons other than the original forbidden from reproducing, distributing, disclosing, changing,
defect. The customer shall, in particular, comply with the operational, translating, extending, making other modifications to and/or
storage and/or maintenance recommendations provided by Würth decompiling such.
Elektronik or the manufacturer.
8.4 For backup purposes, the customer may create the necessary
7.8 The customer’s claim for reimbursement of expenses in place of backup copies of the software, provided the individual licence
damages in lieu of performance shall be excluded if and to the extent agreement does not contain provisions to the contrary. Sec. 69d (2)
that such expenses would not have been made by a reasonable third Germany Act on Copyright and Related Rights (UrhG) remains
party. unaffected. Backup copies on moveable data carriers shall be marked
as such and shall be endorsed with the copyright notice of the original
7.9 Würth Elektronik shall not be liable for damage for which it is not data carrier.
responsible, in particular, it shall not be liable for damage that is caused
by improper usage or handling of the products. The customer is obliged 8.5 In the event of unlawful use Würth Elektronik and/or third parties,
to comply with the operational, storage and/or maintenance in particular, the manufacturer of the software or other protected
recommendations provided by Würth Elektronik or the manufacturer, to products, reserve the right to assert claims for compensation.
only make authorised changes, replace spare parts professionally and
use the consumables that have the necessary specifications. Where 8.6 In the event that a third party alleges it has a claim which conflicts
applicable the customer shall, both before and also regularly after the with the right of use granted to the customer, the customer shall inform
deliveries have been made or the services have been provided by Würth Elektronik without undue delay in text form. The notification shall
Würth Elektronik, perform backups to its computer systems at also include information as to whether the customer has changed the
sufficiently regular intervals. Würth Elektronik shall assume no liability software or the product or combined such with other software and
for damage which is caused by or can be attributed to a breach of the whether this, from the customer's perspective, could justify the third
aforesaid obligations of the customer. party's claim. If so requested by Würth Elektronik, the customer shall
allow Würth Elektronik to handle the defence against these claims and,
7.10 Würth Elektronik shall be liable without limitation for any to the extent permissible and possible, shall allow Würth Elektronik to
damage resulting from breach of guarantee or from death, bodily injury, represent the customer or shall conduct the defence itself as instructed
or damage to health. The same shall apply to wilful misconduct and by Würth Elektronik. Up until receiving notification as to whether Würth
gross negligence, to mandatory statutory liability for product defects (in Elektronik will deal with the defence, the customer shall not
particular under the German Product Liability Act (ProdHaftG) and to acknowledge or enter into a settlement agreement regarding the
liability if defects were concealed with fraudulent intent. In cases of alleged claims of the third party without the express approval of Würth
slight negligence, Würth Elektronik shall only be liable if material Elektronik. If Würth Elektronik deals with the defence, this obligation
obligations are breached that result from the nature of the contract and shall continue to apply. In addition, the customer shall support Würth
the performance of which is of particular importance in order for the Elektronik in its defence, if this is required for an appropriate defence.
purpose of the contract to be achieved. If such obligations are In return, Würth Elektronik shall indemnify and hold the customer
breached, as well as in the event of default or if performance is harmless against any necessary external costs and any third party
impossible, Würth Elektronik's liability shall be limited to the damage compensation claims and claims for reimbursement of expenses
which can typically be expected with such contract. resulting from the defence, provided these can be attributed to the fault
of Würth Elektronik. In the event that Würth Elektronik does not deal
with the defence, the customer shall be entitled to defend itself at its

own discretion. If existing third party claims cannot be attributed to the 12.1 The legal relations between the customer and Würth Elektronik
fault of Würth Elektronik, the customer shall not be entitled to assert shall be governed by the laws of the Federal Republic of Germany,
claims against Würth Elektronik. without regard to the United Nations Convention on Contracts for the
International Sale of Goods (CISG).
8.7 Notwithstanding Sec. 439 (1) German Civil Code (BGB), Würth
Elektronik shall also be entitled with regard to title defects relating to 12.3 Exclusive place of jurisdiction for all disputes arising from the
software to attempt subsequent performance, if Würth Elektronik so business relationship between Würth Elektronik and the customer shall
chooses (cf. 7.4). In all other respects, the statutory provisions for be the registered office of Würth Elektronik. Würth Elektronik may in
warranty obligations for title defects with regard to software shall apply addition sue the customer at the latter’s registered office, as well as at
irrespective of whether Würth Elektronik is dealing with the defence any other permissible place of jurisdiction.
against third party claims under clause 8.6 of these Conditions,
however, with the following exceptions: (i) for the recovery of data, 12.4 The place of performance for any and all obligations to be
Würth Elektronik shall only be liable insofar as the loss of data would performed by the customer and by Würth Elektronik shall be the
also have occurred if the customer had carried out the usual backups; registered office of Würth Elektronik.
(ii) clause 7.3 of these Conditions applies accordingly.
12.5 If a provision of this agreement is or becomes invalid or
9. Product liability impracticable in whole or in part, or if this agreement is incomplete, this
9.1 The customer shall not modify the goods; in particular, the shall not affect the validity of the remaining provisions hereof. In lieu of
customer shall not modify or remove existing warnings relating to risks the invalid or impracticable provision, such valid and impracticable
by improperly using the goods. If this duty is violated, the customer must provision shall be deemed agreed as comes closest to the purpose of
inter partes indemnify and hold Würth Elektronik harmless from and the invalid or impracticable provision. In the event that this agreement
against any product liability claims of third parties to the extent that the is incomplete, such provision shall be deemed agreed as corresponds
customer is responsible for the defect giving rise to liability. to what would have been agreed according to the purpose of this
agreement if the contracting parties had considered the matter from the
9.2 If Würth Elektronik has to carry out a product recall or issue a outset.
product warning because of a product defect to the goods, the customer
shall assist Würth Elektronik and take all measures ordered by Würth 13. Environmental declaration
Elektronik, provided that these do not pose an unreasonable burden to Würth Elektronik is committed to people and the environment.
the customer. The customer shall be obliged to bear the costs of the Therefore, we undertake to manufacture our products in a manner that
product recall or product warning, provided the customer is responsible conserves resources and to systematically realise any potential for
for the product defect and the damage sustained. This does not affect saving energy in manufacturing processes and in transportation. We
any further claims of Würth Elektronik. pay close attention to ecological alternatives as concerns the selection
of sources of energy and raw materials and pursue a consistent policy
9.3 The customer shall inform Würth Elektronik without undue delay in of waste reduction and product recycling.
textual form of any risks in the use of the goods and any possible
product defects of which the customer becomes aware.
10. Force majeure

10.1 If Würth Elektronik is prevented by force majeure from
performing its contractual obligations, in particular from delivering the
goods, Würth Elektronik shall be released from its obligation to perform
for the duration of the impediment and for a reasonable start-up period
without being liable to the customer for damages. The same shall apply
if the performance of its obligations by Würth Elektronik becomes
unreasonably complicated or temporarily impossible because of
unforeseeable circumstances for which Würth Elektronik is not
responsible, in particular, because of industrial action, official acts,
energy shortages, delivery problems on the part of suppliers, or major
disruptions of operations.
10.2 Würth Elektronik shall have the right to rescind the contract if
such an impediment continues for more than three months and if, as a
result of such impediment, the performance of the contract is no longer
of interest to Würth Elektronik. At the request of the customer, Würth
Elektronik shall declare after the expiry of the aforesaid three-month
period whether it intends to make use of its right to rescind the contract
or whether it intends to deliver the goods within a reasonable period of
time.
11. Confidentiality
The customer shall be obliged for an unlimited period of time to maintain
the confidentiality of any and all information received through Würth
Elektronik which is stated to be confidential or which due to other
circumstances can be identified as a trade or business secret; the
customer may neither record nor disclose or use any such information.
The customer must ensure by means of suitable contractual
agreements with its employees and those agents working on its behalf
that such persons also refrain for an unlimited period of time from any
use, disclosure and unauthorised recording of such trade and business
secrets for their own purposes.
12. Final provisions

12.1 Any rights and obligations of the customer may only be
assigned or transferred to a third party with the written consent of Würth
Elektronik.

Notes

Notes

Notes

Electronic &
Electromechanical Components
EMC Components
Power Magnetics
Signal &
Communications
Quartz &
Oscillators
Capacitors
Resistors
Automotive Standard
Products
Optoelectronics
Power Modules
Wireless Connectivity
& Sensors
Connectors
Fuseholders
Switches
Assembly Technique
REDCUBE Terminals
10/20 Würth Elektronik eiSos®

more than you expect
Würth Elektronik eiSos differs from all other component

manufacturers in several aspects:
e guarantee all catalogue products are available ex stock
W
Samples free of charge
Orders below MOQ
Design kits with lifelong free refill
Design Guide Trilogy of Magnetics, Trilogy of Connectors,
Trilogy of Wireless Power Transfer, Abc of Capacitors,
Abc of Power Modules & Application Handbook
The LTspice IV Simulator
Design Seminars and Webinars free of charge
Reference designs of leading IC manufacturers
Worldwide technical sales force and field
application engineers on site
DIE NECKARPRINZEN 99999912.1120.8.´SK
www.we-online.com

Electronic Components

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electronic Components

Uploaded by

Copyright:

Available Formats

Electronic Components

REDEXPERT. The online platform of Würth Elektronik to select

Signal & Communications 77

Quartz & Oscillators 99

Terms of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

10/20 Würth Elektronik eiSos® 3

The Würth Elektronik Group Employees: 7,300

Würth Elektronik eiSos Group

Intelligent Power and

IQD Frequency Products Ltd. Erwin Büchele GmbH & Co. KG

Globally available. Locally present.

Nakhon Ratchasima (Thailand)

4 Würth Elektronik eiSos® 10/20

SAY YES TO OUR FAST AND COST-FREE WE TAILOR THE

ALL CATALOGUE PRODUCTS RE-REELING

DESIGN SEMINARS AND ONLINE DESIGN PLATFORM FOR

DESIGN KITS WITH LIFELONG REFERENCE DESIGNS OF

10/20 Würth Elektronik eiSos® 5

Get more information:

6 Würth Elektronik eiSos® 10/20

10/20 Würth Elektronik eiSos® 7

Quality and Laboratories

1 4 Quality Centers Worldwide

Waldenburg, Germany Lyon, France

Shenzhen, China Watertown, USA

 A nalysis Lab – Microscopic Analysis, Thermal Strength Wetting

3 Process and Product Quality

We work with the common quality methods like:

8 Würth Elektronik eiSos® 10/20

As one of the leading manufacturers of electronic components

We continuously work on the reduction

5 Our Ecology Projects

The WE eiSos contributes to the preservation of the environment for

More about quality and

10/20 Würth Elektronik eiSos® 9

Trilogy of Magnetics Abc of Capacitors

Further information and

1st Edition: 1st Edition: 1st Edition:

10 Würth Elektronik eiSos® 10/20

Get Your IoT Device Matched!

10/20 Würth Elektronik eiSos® 11

Filter Applications: EMI Suppression

@ Frequency NiZn (Nickel-Zinc)

Multilayer SMT Ferrites

Size: 0603, 0805, 1206, 1612,

WE-MPSB Z @ 1 GHz: 24 – 253 Ω

Frequency Range: 1 MHz – 3 GHz

Size: 0201, 0402, 0603

Size: 0402, 0603

250 – 1300 mA Z @ 1 GHz: 180 – 1100 Ω

Wired SMT Ferrites

Frequency Range: 1 MHz – 3 GHz

4A L x W x H Max: 11.2 x 11.2 x 11 mm

WE-MLS Z @ 25 MHz: 115 – 292 Ω

10/20 Würth Elektronik eiSos® 13

Filter Applications: EMI Suppression

Ferrites for Cable Assembly

@ Frequency MnZn (Manganese-Zinc)

Round Cable – Medium and High Frequency

RING 110 – 165 Ω

Z @ 25 MHz 1 turn: 120 – 180 Ω

4.5 – 12.5 mm Frequency Range: 100 – 2000 MHz

Z @ 25 MHz 1 turn: 48 – 100 Ω

Z @ 25 MHz 1 turn: 25 – 110 Ω

A nalysis Lab – Microscopic Analysis, Thermal Strength Wetting

We work with the common quality methods like: