NC20

Metric & Inch

Solid Miniature Turning

for small bore
The new YG-1 NanoCut is a turning tool for small bore applications.
A wide range of insert series cover various application
like boring, grooving, profiling and chamfering
with optimizied grade for improved productivity.
 SOLID MINIATURE TURNING LINE SOLID MINIATURE TURNING LINE

Overview Code Keys - Boring bar & Holder

At present, as demand for small parts (camera lens, mobile phone parts) and medical instruments (implants)
increases, demand for small-diameter products capable of high-precision processing is increasing. Boring bar
Series Tool Direction Usable Length (LU) Grade
BP – Boring & Profiling R – Right Hand (4 mm)
Application L – Left Hand
• Turning of Small Bore Components
• Internal Turning(Boring), Grooving, Threading
NC BP 4 R - 10. 04 - 005 - YG812
Features
• Minimum Diameter(Boring & Profiling series) : Ø 1 mm (.039")
• Internal Coolant for Longer Tool life and Enhanced Chip Evacuation Nanocut Connection Diameter (DCON) Minimum Bore Diameter (DMIN) Corner Radius (RE)
• Secure Connection Design: Pin + Slant Positioning (4 mm) (1 mm) (0.05 mm)
• 9 Geometries for Various Application

Advantages Holder DCONMS DCONWS Inch

• High Repeatability
• Longer Tool Life

Benefits NC H I - 16. 04 (i)

• Reduce Machine Down Time
• Lower Machining Cost
Nanocut Holder I – Internal

YG812 - Micro Grain Carbide Grade

P10 - P20
K20 - K30
M20 - M30
S10 - S25
Submicron Grade Carbide Substrate Material for high toughness
and wear resistance realizes high precision machining
Success Story
Cutting Conditions Less is
NanoCut Series
* * Ø 6 mm, R 0.2 mm
better Competitor
BP - Boring & Profiling BO - Boring with Chipbreaker BF - 90˚Boring
55 μm
Size
(Ø .236", R .008")

43 μm
Work Material SCM440 (HRc 20)

Cutting Speed 100 m/min. (328 ft./min.)

* * *
PR -Profiling GS - Grooving Square GR -Grooving Round RPM 637 rev./min.
Edge wear (after 30 min.)
0.1 mm/rev.
Feed per revolution
(.004 inch/rev.)

Axial: 10 mm (.390")
Boring depth
Radial: 0.15 mm (.006")

* * *
FI - Face Grooving Internal FE - Face Grooving External CH - Chamfering Coolant Wet Cut

Competitor
Operation Boring

Machine Turn Mill

* On your request

2 phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr 3

 SOLID MINIATURE TURNING LINE SOLID MINIATURE TURNING LINE

Product List - Boring bar Product List - Holder

BP - Boring & Profiling
OAL
OHX

OAH

H
8˚
DCONWS

CDX
WF

DCON
DMIN
20˚
RE LU

DCONMS
OHX Tool Holder

●: Stock item
○ : Order made item
EDP Metric (mm) Inch Insert Size EDP
KAPR DCON Designation YG812 Scale OHX Designation DCONMS OAL H OAH
NCBP.. DMIN LU RE CDX WF OHX DMIN LU RE CDX WF OHX (DCONWS) ZBR..
NCBP4R-10.04-005-YG812 04R1004005T 1 4 0.05 0.1 0.45 13 .039 .157 .002 .004 .018 .510 ● NCHI-12.4 0400012 12 70 10 15.5
4 mm
NCBP4R-10.04-010-YG812 04R1004010T 1 4 0.1 0.1 0.45 13 .039 .157 .004 .004 .018 .512 ● NCHI-16.4 0400016 16 75 14 17.5
(.157")
NCBP4R-10.06-005-YG812 04R1006005T 1 6 0.05 0.1 0.45 13 .039 .236 .002 .004 .018 .510 ● Metric NCHI-20.4 0400020 20 90 18 20
14
NCBP4R-10.06-010-YG812 04R1006010T 1 6 0.1 0.1 0.45 13 .039 .236 .004 .004 .018 .512 ● (mm) NCHI-12.6 0600012 12 70 10 16.5
6 mm
NCBP4R-17.06-005-YG812 04R1706005T 1.7 6 0.05 0.2 0.7 13 .067 .236 .002 .008 .028 .510 ○ NCHI-16.6 0600016 16 75 14 18.5
(.236")
NCBP4R-17.06-010-YG812 04R1706010T 1.7 6 0.1 0.2 0.7 13 .067 .236 .004 .008 .028 .512 ● NCHI-20.6 0600020 20 90 18 22
NCBP4R-17.09-005-YG812 04R1709005T 1.7 9 0.05 0.2 0.7 13 .067 .354 .002 .008 .028 .510 ○ NCHI-0500.4i 0400500 .500 2.756 .421 .624
4 mm
NCBP4R-17.09-010-YG812 04R1709010T 1.7 9 0.1 0.2 0.7 13 .067 .354 .004 .008 .028 .512 ● NCHI-0625.4i 0400625 .625 2.953 .546 .687
(.157")
NCBP4R-22.06-005-YG812 04R2206005T 2.2 6 0.05 0.2 0.95 13 .087 .236 .002 .008 .037 .510 ○ NCHI-0750.4i 0400750 .750 4.331 .671 .750
Inch .551
NCBP4R-22.06-010-YG812 04R2206010T 2.2 6 0.1 0.2 0.95 13 .087 .236 .004 .008 .037 .512 ● NCHI-0500.6i 0600500 .500 2.756 .421 .663
6 mm
NCBP4R-22.09-005-YG812 04R2209005T 2.2 9 0.05 0.2 0.95 13 .087 .354 .002 .008 .037 .510 ○ NCHI-0625.6i 0600625 .625 2.953 .546 .726
(.236")
NCBP4R-22.09-010-YG812 04R2209010T 2.2 9 0.1 0.2 0.95 13 .087 .354 .004 .008 .037 .512 ● NCHI-0750.6i 0600750 .750 4.331 .671 .827
NCBP4R-22.13-010-YG812 04R2213010T 2.2 13 0.1 0.2 0.95 18 .087 .512 .004 .008 .037 .709 ●

4 mm NCBP4R-27.10-005-YG812 04R2710005T 2.7 10 0.05 0.2 1.2 13 .106 .394 .002 .008 .047 .512 ○
(.157") NCBP4R-27.10-015-YG812 04R2710015T 2.7 10 0.15 0.2 1.2 13 .106 .394 .006 .008 .047 .512 ●
NCBP4R-27.15-005-YG812 04R2715005T 2.7 15 0.05 0.2 1.2 18 .106 .591 .002 .008 .047 .709 ○
NCBP4R-27.15-015-YG812 04R2715015T 2.7 15 0.15 0.2 1.2 18 .106 .591 .006 .008 .047 .709 ●
98˚
NCBP4R-32.10-015-YG812 04R3210015T 3.2 10 0.15 0.2 1.45 13 .126 .394 .006 .008 .057 .512 ●
NCBP4R-32.15-015-YG812 04R3215015T 3.2 15 0.15 0.2 1.45 18 .126 .591 .006 .008 .057 .709 ●
NCBP4R-32.20-005-YG812 04R3220005T 3.2 20 0.05 0.2 1.45 23 .126 .787 .002 .008 .057 .906 ○
NCBP4R-32.20-015-YG812 04R3220015T 3.2 20 0.15 0.2 1.45 23 .126 .787 .006 .008 .057 .906 ●
NCBP4R-42.10-015-YG812 04R4210015T 4.2 10 0.15 0.3 1.95 13 .165 .394 .006 .012 .077 .512 ● YG812 GRADE Cutting Speed Feed per Revolution (Fn)
NCBP4R-42.15-005-YG812 04R4215005T 4.2 15 0.05 0.3 1.95 18 .165 .591 .002 .012 .077 .709 ○
Vc (m/min.) SFM (ft./min.) Fn (mm/rev.) Fn (inch/rev.)
NCBP4R-42.15-015-YG812 04R4215015T 4.2 15 0.15 0.3 1.95 18 .165 .591 .006 .012 .077 .709 ● ISO VDI Sub Group
Min Max Min Max Min Max Min Max
NCBP4R-42.20-005-YG812 04R4220005T 4.2 20 0.05 0.3 1.95 23 .165 .787 .002 .012 .077 .906 ○ 1~5 Non-Alloyed Steel 170 200 558 656 0.015 0.025 0.0006 0.0010
NCBP4R-42.20-015-YG812 04R4220015T 4.2 20 0.15 0.3 1.95 23 .165 .787 .006 .012 .077 .906 ● P 6~9 Low-Alloyed Steel 95 160 312 525 0.015 0.025 0.0006 0.0010
NCBP4R-42.25-005-YG812 04R4225005T 4.2 25 0.05 0.3 1.95 28 .165 .984 .002 .012 .077 1.102 ○ 10~11 High-Alloyed Steel 85 95 279 312 0.015 0.025 0.0006 0.0010
NCBP4R-42.25-015-YG812 04R4225015T 4.2 25 0.15 0.3 1.95 28 .165 .984 .006 .012 .077 1.102 ● 12~13 Ferritic & Martensitic 105 140 344 459 0.015 0.025 0.0006 0.0010
M
NCBP6R-62.15-020-YG812 06R6215020T 6.2 15 0.2 0.5 2.95 18 .244 .591 .008 .020 .116 .709 ● 14 Austenitic Stainless Steel 95 130 312 427 0.015 0.025 0.0006 0.0010
NCBP6R-62.20-020-YG812 06R6220020T 6.2 20 0.2 0.5 2.95 23 .244 .787 .008 .020 .116 .906 ● 15~16 Grey Cast Iron 140 190 459 623 0.015 0.025 0.0006 0.0010
K
17~18 Nodular Cast Iron 140 190 459 623 0.015 0.025 0.0006 0.0010
6 mm NCBP6R-62.25-020-YG812 06R6225020T 6.2 25 0.2 0.5 2.95 28 .244 .984 .008 .020 .116 1.102 ●
(.236") NCBP6R-62.30-020-YG812 06R6230020T 6.2 30 0.2 0.5 2.95 33 .244 1.181 .008 .020 .116 1.299 ● N 21~30 Non-Ferrous Metals (Al) - - - - - - - -

NCBP6R-62.35-020-YG812 06R6235020T 6.2 35 0.2 0.5 2.95 38 .244 1.378 .008 .020 .116 1.496 ● S 31~37 Superalloys & Titanium 10 75 33 246 0.015 0.025 0.0006 0.0010

NCBP6R-62.40-020-YG812 06R6240020T 6.2 40 0.2 0.5 2.95 43 .244 1.575 .008 .020 .116 1.693 ● H 38~41 Hard Materials - - - - - - - -

4 phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr 5

 SOLID MINIATURE TURNING LINE SOLID MINIATURE TURNING LINE

Target Industry & Component Target Machine

These are typical components made in Small Part Machining
CNC Sliding Head Lathes (Swiss Auto Lathes)
• Designed for producing precision watch parts and other components
Hydraulic and Pneumatic Fitting Industry Brass Fitting and Sensor Housing • Exceptionally close geometric tolerances
• A bar being fed through the CNC machine's headstock and being grasped by a collet
• Supporting the bar via a guide bush arrangement for increased stability
• Suitable for various Mill-Turn parts up to a maximum diameter of 42 mm
• Can be Configured for producing miniature prismatic components

Spark Plug Housing Glow Plug Housing used in Diesel

CNC Sliding Head Lathes Brand

Lube Nipples in Auto Parts Automotive Valve Guide

Watch Components (Screw, Case etc.) Medical – Dental Implant, Orthopedic bone screw

6 phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr 7

HEAD OFFICE
211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea
Phone: +82-32-526-0909
Http://www.yg1.kr
E-mail: yg1@yg1.kr

Note The information is Provided for reference only. Tool specifications are subject to change without prior notice.
Although we endeavor to supply accurate and timely information, there can be no guarantee to cover every particular application.
YG-1 or publishers are not liable for any damage for use of the information.

Search ‘YG-1’ on social media outlets YGNC200826001